GE E 1680W digital camera User manual
Below you will find brief information for digital camera E E1680W. This manual describes the basic operation of the camera, including how to take pictures and videos, how to use the zoom function, and how to connect the camera to a computer or printer. It also includes information on the different modes and menus that the camera offers.
Advertisement
Advertisement
imagination at work
GE Digital Camera
E Series : E1680W
User Manual
Getting Started
Basic operation
Camera function controls
Playback
Using the Menus
Camera connectivity
Appendix
EN
WARNING
Do not expose the camera battery pack or other accessories to rain or humidity to prevent a fire hazard or electric shock.
For customers in the U.S.A.
Tested To Comply With FCC Standards
FOR HOME OR OFFICE USE
FCC Statement
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
For customers in Europe
"CE" mark indicates that this product complies with the European requirements for safety, health, environment and customer protection. "CE" marked cameras are intended for sales in Europe.
This symbol [crossed-out wheeled bin WEEE Annex
IV] indicates separate collection of electrical and electronic waste in the European countries. Please do not throw the equipment into the waste. Please recycle and dispose of properly.
Declaration of Conformity
Model Name: E1680W
Trade Name: GE
Responsible Party: General Imaging Co.
Address: 1411 W. 190th Street, Suite 550, Gardena,
CA 90248, U.S.A.
Customer Service Telephone Number:
+1-800-730-6597
(Outside U.S. & Canada: +1-310-755-6857)
Conforms to the following Standards:
EMC: EN 55022:1998/A1:2000/A2:2003 Class B
EN 55024:1998/A1:2001/A2:2003
EN 61000-3-2:2000/A1:2001
EN 61000-3-3:1995/A1:2001 following the provision of the EMC Directive (89/336/EEC,
2004/108/EEC) i
iiii
SAFETY PRECAUTIONS
Camera notes:
Do not store or use the camera in the following environments:
• In the rain, in humid or dusty environments.
• In a place where the camera can be exposed directly to sunlight or subject to high temperatures, e.g. Inside a closed car in summer.
• In a place where the camera is subject to a high magnetic field, e.g. near motors, transformers or magnets.
Do not place the camera on a wet surface or places where dripping water or sand may come in contact with the camera.
If the camera will not be used for a long period of time, remove the battery and the memory card from the camera and store them in a dry environment.
If you carry the camera suddenly from a cold location to a warm place, moisture may condense inside the camera. It is suggested that you wait for a while before turning on the camera.
The warranty does not cover any type of data loss or corruption.
Battery notes:
Incorrect use of the battery may cause it to leak, become hot, ignite or burst. Always observe the following precautions.
• Do not expose the battery to water, and take particular care to keep the terminals dry.
• Do not heat the Battery or throw it into a fire.
• Do not attempt to deform, disassemble or modify the battery.
Keep the battery out of reach of babies and small children.
In cold locations, battery performance deteriorates and battery life is significantly shortened.
Memory card notes:
When using a new memory card, be sure to format the card with your digital camera before using it.
Do not change or delete the folder names or file names in the memory card from your PC or, the camera may not be able to display those edited files on its LCD screen. To edit image data, copy the image data to the PC’s hard disk first.
The photos taken by this camera are stored in the autogenerated folder in the SD card. Please do not store photos that are not taken by this model of camera, as this may make it impossible to recognize the picture when the camera is in playback mode.
1
ii
BEFORE YOU START
Preface
Thank you for purchasing this GE digital camera. Please read this manual carefully and keep it in a safe place for future reference.
Copyright
© Copyright 2011 General Imaging Company All rights reserved.
No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language or computer language, in any form, by any means, without the prior written permission of General Imaging Company.
Trademarks
All trademarks mentioned in this manual are used for identification purposes only and are properties of their respective owners.
Safety Information
Please read the following important information carefully before using this product.
• Do not take apart or attempt to service the camera yourself.
• Do not drop or knock the camera. Improper handling may damage the product.
• Turn off the camera before inserting or removing the battery and memory card.
• Use only the type of battery that comes with the camera.
Using other types of batteries may damage the camera and void the warranty.
• Do not touch the camera lens.
• Please do not expose the camera to harsh environments such as moisture, or extreme temperatures, which may shorten the life of your camera or damage the battery.
• Do not operate or store the camera in dusty, dirty, or sandy environments.
1
2
• Do not expose the lens to direct sunlight for extended periods.
• Download all pictures and remove the batteries from the camera if you are going to store the camera for long periods of time.
• Do not use abrasive cleansers, alcohol-based, or solventbased cleaners to clean the camera. To clean, wipe the camera with a slightly damp soft cloth.
About This Manual
This manual provides you with instructions on how to use your
GE digital camera. Every effort has been made to ensure that the contents of this manual are accurate, however General
Imaging Company reserves the right to make changes without notice.
Symbols used in this manual
Throughout this manual, the following symbols are used to help you locate information quickly and easily:
Indicates useful information to consider.
Indicates precautions to be taken while operating the camera.
3
2
CONTENTS
WARNING .......................................................................i
SAFETY PRECAUTIONS ................................................ii
BEFORE YOU START .................................................... 1
Preface .........................................................................................1
Copyright ............................................................................1
Trademarks ........................................................................1
Safety information ....................................................................1
About this manual .....................................................................2
Symbols used in this manual ..........................................2
CONTENTS .................................................................... 3
GETTING READY .......................................................... 7
Unpacking ...................................................................................7
Camera Views .............................................................................8
Charging the Battery .............................................................. 10
Inserting the Battery and SD/SDHC
Card (Not included) ................................................................ 11
Turning On and Off ................................................................. 13
Using the Mode Button ......................................................... 14
Setting language and date/time ......................................... 15
Setting the Language .................................................... 15
Setting the Date and Time ........................................... 16
About the LCD Screen ............................................................ 17
BASIC OPERATION .................................................... 18
Shooting in Auto Mode .......................................................... 18
Using the Zoom Function ...................................................... 18
Basic Functions Menu ............................................................ 19
Flash .................................................................................. 19
Self-timer ......................................................................... 20
Macro Mode ..................................................................... 20
Exposure Compensation ............................................... 20
Advanced Functions Menu .................................................... 21
WB (White Balance) ....................................................... 22
ISO ..................................................................................... 22
Quality .............................................................................. 23
Size .................................................................................... 23
33
Color .................................................................................. 24
4
USING THE MODES ................................................... 25
LCD Screen Display ................................................................ 25
Still Picture Mode Display ............................................ 25
Video Shooting Mode Display ...................................... 27
Playback Mode Display ................................................. 28
Auto Scene Mode (ASCN) ....................................................... 29
Landscape ....................................................................... 29
Portrait ............................................................................. 29
Night Portrait .................................................................. 30
Backlit Portrait ............................................................... 30
Night Landscape ............................................................ 30
Macro ................................................................................ 30
Auto ................................................................................... 30
Panorama ................................................................................. 30
Manual Scene Mode (SCN) .................................................... 31
Sport ................................................................................. 32
Indoor ............................................................................... 32
Snow ................................................................................. 32
Fireworks ......................................................................... 32
Museum ............................................................................ 32
Night Landscape ............................................................ 32
Children ............................................................................ 32
Leaf ................................................................................... 33
Sunset ............................................................................... 33
Glass ................................................................................. 33
Landscape ....................................................................... 33
Night Portrait .................................................................. 33
Beach ................................................................................. 33
Text..................................................................................... 33
Gathering .......................................................................... 33
ID ........................................................................................ 33
Fish eye ............................................................................. 33
Travel shooting ................................................................ 33
Photo frame ..................................................................... 33
Sketch ................................................................................ 33
Blink Detection ........................................................................ 34
Face Detection ........................................................................ 35
Smile Detection ....................................................................... 36
PLAYBACK ................................................................... 37
Viewing Photos and Videos .................................................. 37
Thumbnail View ...................................................................... 39
Using Zoom on Playback (for still pictures only) .............. 40
Using the Delete Button ........................................................ 41
USING THE MENUS ................................................... 42
Still Menu .................................................................................. 42
AF Mode (Auto-Focus mode) ........................................ 43
AF-assist Beam ............................................................... 43
Continuous AF .. ............................................................... 44
Expo Metering (Exposure Metering) .. ......................... 44
Continuous Shot ............................................................. 45
Date Imprint .................................................................... 45
Quick Review ................................................................... 46
Digital Zoom .................................................................... 46
Slow Shutter .................................................................... 47
Movie Menu .............................................................................. 48
Continuous AF .. ............................................................... 49
Expo Metering (Exposure Metering) .. ......................... 49
Playback Menu ........................................................................ 50
Protect .............................................................................. 50
Delete ............................................................................... 51
DPOF (Digital Print Order Format) .............................. 52
Trim ................................................................................... 53
HDR-High Dynamic Range ............................................ 53
Resize ................................................................................ 54
Rotate ............................................................................... 54
Red-eye Reduction ......................................................... 55
Display Setup ........................................................................... 55
Slideshow ......................................................................... 56
Wallpaper Settings ........................................................ 56
Setup Menu .............................................................................. 59
5
Beep .................................................................................. 60
LCD Brightness ............................................................... 60
Power Saver .................................................................... 61
Zone .................................................................................. 61
Date/Time ........................................................................ 62
Language ......................................................................... 62
File and Software .................................................................... 62
Format Memory ............................................................... 62
File Numbering ............................................................... 63
Copy to Card (Copy internal memory to memory card) .................................................................. 63
Reset Settings ................................................................. 64
FW Version (Firmware version) ................................... 64
66
Transmission .............................................................. 65
Video System ........................................................................... 65
Connecting Your Camera to a HDMI TV to View Videos .. 66
Connecting to a PC ................................................................. 67
Setting the USB Mode ................................................... 67
Transferring Files to your PC ....................................... 67
Connecting to a PictBridge Compatible Printer .............. 69
Setting the USB Mode ................................................... 69
Connecting the Camera and Printer .......................... 70
Using the PictBridge Menu ................................................... 71
Print with Date ............................................................... 71
Print without Date ......................................................... 72
Print Index ....................................................................... 73
Print DPOF ....................................................................... 74
Exit ..................................................................................... 74
APPENDICES .............................................................. 75
Specifications .......................................................................... 75
Error Messages ....................................................................... 79
Troubleshooting ...................................................................... 81
7
6
GETTING READY
Unpacking
Your package should contain the camera model you purchased along with the following items. If anything is missing or appears to be damaged, please contact General Imaging.
Warranty Card CD-ROM Wrist Strap
USB Cable Rechargeable lithium-ion battery Battery charger
7
8
Camera Views
Front View
1 2 3 4
Back View
5
GE
Right View
12
11
8
9
10
6
7
9
8
Top View Bottom View
Left View
13
14
15
16 17 18 19 20 21 22 23
1 Flash
2 Lens
3 Mic
4 AF assist beam/Timer indicator
5 LCD Screen
6 Mode Selection Button
7 Menu Button
8 Disp/Up Button
9 Flash Mode/Right Button
10 Delete Button/Down Button
11 Face Detection/Left button
12 Function/OK Button
13 HDMI Port
14 USB/AV Port
15 Wrist Strap Mount
16 Power Button
17 Power Indicator
18 Playback Button
19 Shutter Button
20 Zoom Wheel
21 Tripod Mount Point
22 Speaker
23 Memory Card/Battery Compartment
99
Charging the Battery
1. Place the battery into the charger as shown.
2. Plug the one end of the connecting cable (plug adapter) into the charger base.
3. Plug the other end of the connecting cable into a wall outlet.
1
2
Leave the battery charging until the charger light turns green. (To maximize battery life, the first charge should be at least 4 hours)
The charger is for indoor use only.
Insert the Battery and SD/SDHC Card (Not included)
1. Open the battery compartment.
2.
Insert the battery while observing the correct polarity. Use the side of battery to press down the stopper as shown, allowing the battery to lock into place properly.
3. Insert an SD/SDHC card (not included) into the memory card slot as shown.
4. Close the battery compartment.
13
12
Optional SD/SDHC cards are not included. The use of 64 MB to 32 GB memory cards from recognized manufacturers such as SanDisk, Panasonic and Toshiba are recommended for reliable data storage.
To remove the SD/SDHC card, open the battery compartment and gently push the card to release it.
Pull the card out carefully.
Turning On and Off
Press the Power button to turn the camera on. To turn off the camera, press the Power button again.
Power Button
When the camera is turned on, it will default to the the shooting mode last used. You can use the Mode button on the back to change modes. When using the camera for the firsttime, the language setup page will appear.
13
Using the Mode Button
The GE camera provides a convenient Mode Button that allows you to switch between different modes easily. After pressing the mode button to enter mode selection menu, press the Left/Right button to choose the mode, press the button to confirm your selection. All the available modes are listed as follows:
Mode Name
Auto mode
Icon Description
The camera sets all the settings automatically.
Manual mode
Panorama Mode
Scene mode
Movie mode
ASCN mode
Portrait
M
Many of the camera settings can be configured manually in this mode.
In this mode, up to 8 frames can be stitched together to create panoramic photo.
Choose from 20 different scene types and effects for your photos.
Switch to record videos.
Switch to have the camera automatically select the best scene type for still pictures.
Switch to take portrait pictures.
Setting Language and Date/Time
The Date/Time and Language setup page will automatically appear when the camera is turned on the first time.
To set the display language and date/time, go to the following setup options in the General Setup menu.
• Language
• Date/Time
To access the General Setup menu, do the following:
1. Press the Power button to turn the camera on.
2. Press the button, then switch among camera settings menus with the Left/Right button and select the General
Setup menu. Then press the Up/Down button to access
General Setup menu options.
Setting the Language
1. Select language with the Up/Down button, then press the
or right button to enter language options.
2. Use the Up/Down/Left/Right buttons to select the desired language.
3. Press the button to confirm the setting.
Setting the Date and Time
1. Select date/time with Up/Down button, then press the or right button to enter the date/time settings options.
2. Use the Left/Right button to select the date or time field, then press the Up/Down buttons to adjust the values.
3. Press the button to confirm the setting.
17
16
About the LCD Screen
When you turn the camera on, various icons are shown on the
LCD screen to indicate the current camera settings and status.
To learn more about the displayed icons, see “ LCD Screen
display” on page 25.
LCD Screen notes:
Extremely high-precision technology has been used to manufacture the LCD screen so that most of the pixels are operational for use. However, there may be some minute points (black, white, red, blue or green) that constantly appear on the LCD screen. These points are normal in the manufacturing process and the recorded image is not affected in any way.
Avoid exposing the LCD screen to water; please remove any moisture on the LCD screen with a soft dry cleaning cloth.
If the LCD monitor is damaged, take particular care with the liquid inside the monitor. If any of the following situations arise, take the recommended immediate action indicated below:
• If liquid from the LCD comes in contact with your skin, wipe the area with a cloth and then wash thoroughly with soap and running water.
• If liquid from the LCD flows into the eyes inadvertently, please rinse with water immediately and seek medical assistance.
• If liquid from the LCD is swallowed, flush your mouth thoroughly with water. Drink large quantities of water and induce vomiting. Then seek medical assistance immediately.
17
BASIC OPERATION
Shooting in Auto Mode
Auto mode is the easiest mode to take photos. While operating in this mode, the camera automatically optimizes your photos for best results.
To start shooting, do the following:
1. Press the Power button to turn the camera on.
2. In the Mode menu, select the Auto mode ( ).
3. Compose your picture in the LCD screen and press the
Shutter button halfway to focus on the subject.
4. The focus frame in the middle of the LCD will turn to green when the subject is properly in focus.
5. Press the Shutter button fully to capture the image.
Using the Zoom Function
There are two built-in zoom functions: optical zoom and digital zoom. When taking photos, you can zoom in or out on an object using the zoom wheel.
W T
Zoom indicator (See
“Digital Zoom“ on page 46)
When the optical zoom reaches its maximum value, it stops momentarily. Release and push the zoom wheel again, and the optical zoom will switch over to digital zoom automatically.
After the adjustment, the zoom indication scale hides immediately, and the current zoom status is indicated by the following symbol .
Basic Functions Menu
The Basic Function Menus of the camera include Flash, Selftimer, Macro Capture, and Exposure Compensation.
Set the basic functions as per the following steps:
1. Pull up the Basic Function Menus by pressing the Right/
Flash button.
2. press the Down button to enter the basic functions selection screen, then press the Left/Right button to select the functions which need to be set.
3. Press Up/Down button to enter the basic functions setup screen.
4. After pressing Left/Right button to select the options which need to be set, press the button to confirm the setting and quit the screen.
Flash
•
•
Flash: Auto
The flash will fire automatically in low lighting conditions.
Flash: Red-eye reduction
Red eye is caused by the subject looking directly at the flash and the resulting light reflecting off of the retina of the eye. Red eye is eliminated by firing a smaller initial flash prior to the main flash to cause the subject not to look directly at the flash.
• Flash: Forced flash
The flash will fire with every shot.
•
•
•
Flash: Forced off
Flash is turned off.
Flash: Slow Synchro
This allows you to take pictures of people at night that clearly show the subject. The shutter is held open longer to allow more light to the image sensor.
Flash: Red-Eye+Slow Synchro
Using this mode for slow synchro shots with red-eye reduction.
Self-timer
•
•
Self-timer: 2 sec
A single picture is shot 2 seconds after the Shutter button is pressed.
Self-timer: 10 sec
A single picture is shot 10 seconds after the Shutter button is pressed.
• Self-timer: Off
Disables the self-timer.
Macro Mode
•
•
Macro: On
Select this to focus on subjects 5cm from the lens.
Macro: Off
Select this option to disable Macro mode.
Exposure Compensation
The exposure compensation feature allows you to adjust the light exposure value and control the brightness of the photo.
The adjustable range of exposure value is from EV -2.0 to
EV+2.0.
21
20
Advanced Functions Menu
The Advanced Functions Menu of the camera include Image
Size, Image Quality, White Balance, Image Color and ISO.
Set the advanced functions as follows.
1. Pull up the Advanced Function Menu by pressing the button.
4. Use the Left/Right buttons to change the settings then press the to confirm the new settings and close the
Advanced Function Menu.
2. Press the Down button to enter the advanced function selection screen, press the Left/Right button to select the function that you want to set.
3. Press the Up button to enter the advanced function setting interface.
21
WB (White Balance)
The White Balance allows you to adjust the color temperature under different lighting conditions. (The WB setting is only available when the camera is in the
M
Manual mode).
ISO
The ISO function allows you to set the sensitivity of the camera's sensor to light. To improve the performance in darker environments, a higher ISO value is required. On the other hand, a lower ISO value is needed when in bright conditions. (The ISO setting is only available when the camera is in the
M
Manual mode).
Pictures taken with higher ISO will generally have more noise than those taken with lower ISO.
22
•
•
•
•
•
The options of White Balance include:
• WB: Auto
• WB: Daylight
WB: Cloudy
WB: Fluorescent
WB: Fluorescent CWF
WB: Incandescent
WB: Manual (Press the shutter button to set WB.)
The options of ISO include automatic, 64, 100, 200, 400, 800,
1600 and 3200.
The available ISO values vary on different camera models.
Quality
The quality setting determines how much the camera compresses the photo files. The higher the compression, the smaller the file size will be, but the quality will decrease. The lower the compression, the larger the file size, but the better the quality.
Size
The size setting refers to the image resolution in pixels. A higher image resolution allows you to print that image in larger sizes without degrading the image quality.
The three levels of compression are:
•
•
: Quality: Best
: Quality: Fine
• : Quality: Normal
The larger the pictures are, the bigger the file sizes are and the less pictures you can store on a memory card.
23
Color
The color setting option allows you to add artistic effects when taking pictures. You can try different color tones to alter the mood of your pictures. (The Color option is only available when the camera is in the
M
Manual mode).
The color options include:
• Color: Auto
• Color: Vivid
•
•
Color: Black & White
Color: Sepia
25
24
USING THE MODES
LCD Screen Display
Still Picture Mode Display
Mode:
M
1 2 3 4 5
6
17
16
15
14
6 7
9
10
11
13 12
18 19 20 21 22
6
1 Shooting Mode Icons
Auto mode
ASCN mode
Panorama Mode
2 AF Mode
Single-AF
Multi-AF
3 Expo Metering
Spot
Center
AiAE
4 Image Size
5 Image Quality
Manual mode
Scene mode
Portrait
25
26
6 Remaining number of pictures
7 Memory card/built-in memory
8 Battery Status
9 WT Ratio (Displayed only when zoom is activated)
10 Zoom
11 Exposure
12 ISO Value (Adjustable only in
M
Manual Mode)
13 Histogram
14 Focus Frame
15 OIS
16 Continuous Shot / Slow Shutter Warning
17 Face Detection
18Picture Color (Adjustable only in
M
19 White Balance (Adjustable only in
20 Macro Mode
21 Self-timer
Manual Mode)
M
Manual Mode)
Self-timer: 2 sec
Self-timer: 10 sec
22 Flash Mode
Flash: Auto
Flash: Red-eye reduction
Flash: Forced flash
Flash: Forced off
Flash: Slow Synchro
Flash:Red-Eye+Slow Synchro
Video Shooting Mode Display
Mode :
1 2 3 4 5 6 7 8 9
14
13
10
11
12
1 Video Mode icon
2 Continuous AF
3 Metering
Spot
Center
AiAE
4 Image Size
5 Focus Frame
6 Self-timer
Self-timer: 10 sec
7 Remaining Time for Video Recording
8 Memory Card/Built-in Memory
9 Battery Status
10 WT Ratio (Displayed only when zoom is activated)
11 Zoom
12 Exposure
13 OIS
14 Recording Status Icon
Recording standby
Recording
In order to shoot video, it is recommended that an SD card be used.
When shooting video, the optical zoom is disabled.
HD recording time is limited to below 29min.
OIS is a function which is enabled by default unless deactivated by the user in either shooting or recording mode.
27
Playback Mode Display
Mode:
1 2 3 4 5 6
13
7
12
8
9
11 10
1. Playback Mode icon
2. DPOF file
3. File protection
4. Picture Number
5. Memory Card/Built-in Memory
6. Battery Status
7. Image Zoom
8. The current display area
9. Zoom magnification area shown
10. Memory Space (this picture/Total number of pictures)
11. Recording Date and Time
12 OK:PLAY
13. HDR
29
28
Auto Scene Mode (ASCN)
In the " ASCN" mode, different conditions are detected intelligently and the most suitable settings will be automatically selected.
To use "ASCN":
1. Press mode selection button and select ASCN mode, press the button to enter ASCN mode, the LCD screen will display the detected scene icon as shown in the following figure:
2. Hold the camera steadily and aim at the subject. The optimum scene mode will be identified automatically.
3. Press the Shutter button halfway down to focus.
4. Press the Shutter button all the way down to take the picture.
Icon Mode name Icon Mode name
Landscape Mode Night Landscape Mode
Portrait Mode
Night Portrait
Backlit Portrait
Macro Mode
Auto Mode
Landscape Mode
For landscapes, ASCN will automatically adjust the exposure to match the background.
Portrait Mode
For portraits, ASCN will automatically adjust the exposure and skin tones for more natural lokking pictures.
29
Night Portrait
When you shoot portraits at night, or in low light conditions,
ASCN will automatically adjust the exposure for people and night scenes.
Backlit Portrait
When the sun or any other light source is behind you, ASCN will automatically adjust the foreground exposure to produce good pictures.
Night Landscape Mode
For night scenes, ASCN will automatically increase the ISO value to compensate for low light.
Macro Mode
To capture object detail for close-ups, ASCN will automatically adjust the focus.
Auto Mode
The camera automatically adjusts the exposure and focus to ensure good pictures.
Panorama
Panorama Mode allows you to create a panoramic picture by stitching together several pictures.
Follow these steps to create a panoramic picture:
1. Press the Mode button, use the Left/Right button to select
Panorama mode, then press the button to confirm the setting.
2. Use the Left/Right button to select the direction of image stitching, e.g. left to right or right to left. Then press the
button to confirm the setting; if no selection is made the camera will default to left to right stitching after 2 seconds.
3. After the first shot is taken, two target icons will appear on the left and right side of the LCD screen. Pan the camera and the circle icon on the screen in the specified direction and the circle will move towards the square frame icon.
When the circle icon and square frame become green they will overlap, and the camera will capture the next picture automatically. You can repeat this process with up to 8 frames.
4. After taking 8 frames, the camera will stitch the images together automatically. Press the Playback button to view the final image.
After selecting Panorama mode, Flash, Self-timer, Macro mode and Exposure Compensation can’t be adjusted.
After taking a Panoramic picture press the func/ok button to save and exit or press the Delete button to cancel and exit.
In Montage mode, up to 8 photos can be captured when the image size is set at 2MP.
Manual Scene Mode (SCN)
In Manual Scene mode, you can select from a total of 20 scene types to match your needs. You just need to select the right scene for the occasion and the camera will automatically adjust to the optimal settings for you.
Press the Mode button, then use the Left/Right button to enter the Scene Selection mode menu, then press the button to enter Scene Selection mode, the following figure will display on LCD screen:
32
Select a scene using the Up/Down/Left/Right button and press the button.
Icon Mode Name
Sport
Snow
Museum
Children
Sunset
Landscape
Beach
Gathering
Fish eye
Photo frame
Icon Mode Name
Indoor
Fireworks
Night Landscape
Leaf
Glass
Night Portrait
Text
ID
Travel shooting
Sketch
Sport
For fast-moving subjects. Capture sharp action shots without blur.
Indoor
For indoors. Reduce blur and improve color accuracy.
Snow
For snow scenes. Reproduce natural and clear snow scenes.
Fireworks
For fireworks at night. Slow shutter speed adjusted for brilliant images. The use of a tripod is recommended.
Museum
For museum or flash-free areas. Retain color and reduce blur.
Night Landscape
For night scenes. The use of a tripod is recommended.
Children
For kids and pets. Flash is disabled for eye protection.
Leaf
For plants. Capture brilliant shots of greenery and blossoms.
Sunset
For sunsets. Capture subjects in strong sunlight.
Glass
For objects behind transparent glass.
Landscape
For landscapes. Vivid reproduction of green and blue.
Night Portrait
For portraits against night scenery.
Beach
For taking pictures in areas with strong sunlight.
Text
For taking pictures of text or documents or display boards.
Gathering
For taking pictures of people gathering indoors. Photos will appear natural even under difficult lighting conditions.
ID
Ideal to take pictures of documents such as IDs.
Fish eye
For creating interesting image distortion, similar to viewing an image through the eye of a fish.
Travel shooting
Produces background image blur that emphasizes the motion of the main subject.
Photo frame
For adding interesting frame effects to the photo.
Sketch
For taking photos with pencil sketch effect.
33
1. After selecting the scene type, press the button to activate.
2. After setting the option, press the button to confirm the setting and enter the selected Scene Selection mode for shooting.
The main function menu also allows you to adjust the image quality and image size. Please refer to the " Advanced
Functions Menu" section on page 21 for detailed instructions.
Blink Detection
Blink Detection is enabled by default unless disabled by the user. When shooting, if a face is detected its eyes closed, the
Blink Detection will appear on the screen to show that a blink was detected.
Face Detection
The Face Detection mode will detect and enhance facial features.
1. In Shooting Mode, press the Left/Face Detection button to enable the Face Detection and the ( ) will appear on the LCD.
2. Hold the camera securely, and point the camera towards the subject to start the face detection process. When the camera detects a face, a white rectangular frame will be drawn around the face. (Note: For best results, the face of the subject should be relatively large on the LCD screen, and the subject should be facing the camera as directly on as possible.)
3. Press the Shutter button halfway to focus on the subject.
4. The frame around the face will turn green when the subject is in focus. Press the Shutter button fully to capture the image.
5. Press the Left/Face Detection button to dissable Face
Detection.
Smile Detection
With the "Smile Detection" feature, the camera automatically detects and captures a person smiling.
1. In Shooting Mode, press the Left/Face Detection button to enable Smile Detection and the ( ) will appear on the
LCD.
2. Point the camera at the subject until the subject's face is detected and bracketed by a white frame. Press the
Shutter button completely and then release it. The camera will now 'wait' for the subject to smile
3. When the subject smiles, the camera will automatically and capture the photo.
4. To disable the Smile Detection function, press the Left button, or the Shutter button.
A face must be detected by the camera in order for smile detection to function correctly.
For best results, the subject should be framed to occupy most of the screen space.
PLAYBACK
Viewing Photos and Videos
To view the captured photos and video clips on the LCD screen:
1. Press the button to enter the Playback mode. The last recorded photo or video clip will appear.
2. Use the Left/Right navigation buttons to scroll through the photos or video clips stored in the internal memory or memory card.
3. To play a selected video clip, press the button to enter the movie playback mode.
During video playback, the operating instructions will appear on the screen. Press the Left/Right button, and press the button for confirmation.
1
4
5
2
3
6
The operating instruction icons are as follows.
1
Return to the first frame and play
2 Play
3 Fast Forward
4
Return to the first frame
5 Rewind
6 Pause
When playing a movie, press the Up/Down button to increase or decrease the volume. To mute the audio, press and hold the
Down button until the appears.
39
38
Thumbnail View
In Playback mode, toggle the zoom lever to ( ) and thumbnails of your photos and videos will display on the screen.
1. With each press of the zoom lever either 3x3, 4x4 or date folder thumbnails will display.
2. When 3x3 and 4x4 thumbnails are displayed, use the Up/
Down/Left/Right button to select a picture or video clip for viewing; press the button to return to the original size.
3. When date folder thumbnails are displayed, use the Up/
Down button to select the date folder you want to view.
Then press the button to enter the folder and view its images.
4. Use the Up/Down/Left/Right button to select a picture or video clip, press the button to return to the original size.
The Date Folder is displayed in order based on the shooting date.
If the indicator appears on the LCD, then a movie file is currently being displayed.
39
Using Zoom Playback (for still pictures only)
When viewing photos, you can also use the zoom lever to zoom in (2~8) times.
1. Press the button to enter the Playback mode.
2. Use the Left/Right navigation buttons to select a photo to magnify.
3. Press the the photo.
section of the zoom wheel to zoom into
4. When using the zoom wheel to magnify an image. A zoom indicator with your magnified position will appear in the display.
5. Use the navigation buttons to pan across the image.
6. Press the button to return the image to its original scale.
Movie images cannot be magnified.
Using the Delete Button
In Playback Mode, you can press the Down/Delete button to delete pictures or videos.
To delete pictures or videos:
1. Press the button to enter the Playback Mode.
2. Select a picture or video clip you want to delete with the
Left/Right button.
3. Press the Down/Delete button and the delete screen will appear.
4. Select Yes or Back with the Up/Down button and press the
button for confirmation.
Erased photos/video clips cannot be recovered.
Please refer to page 51 for instructions on the Delete
Menu options.
USING THE MENUS
Still Menu
Mode:
M
In any of the above Still Picture Modes, press the button to go to the Still Picture menu.
To adjust each setting:
1. In the Still Picture menu, switch between different Photo
Setup or Camera Setup pages using the Left/Right button, to select the page with the function you want to adjust and press the Down button.
42
2. Press the Up/Down buttons to select the function.
3. Then press the or Right button to enter the submenu.
4. Press the Up/Down button to select an option or press the
Left or button to return to the menu.
5. Press the button to confirm the setting and return to the previous page.
After selecting a function, you can press the Up button to return to the Still Picture menu for other Photo Setup or Camera Setup pages. Or you can press the Down button several times to move to the next setup menu page.
Refer to the following pages for more details about each setting.
43
42
AF Mode (Auto-Focus mode)
Use this setting to control the auto-focus mechanism while taking pictures.
AF-assist Beam
This option can turn on or turn off the AF assist lamp. The AF assist lamp assists the camera in focusing correctly in low light conditions. It is not recommended that this be turned off or the camera may not focus correctly.
Two options are available:
• Single-AF: The focus frame appears on the center of the
LCD screen to focus on the subject.
• Multi-AF: The camera shall focus correctly for multiple parts of the object.
44
Continuous AF
The camera continuously focuses on a moving subject such as a sports player.
Expo Metering (Exposure Metering)
This setting determines what part of the picture the camera uses to determine the correct exposure for the whole picture.
Three options are available:
• Spot
• Center-Weight
• AiAE (Artificial Intelligence AE)
Continuous Shot
Use this setting to perform continuous shooting. After entering this mode, you can shoot multiple images by by pressing and holding down the shutter button.
• Time Lapse: Automatically capture pictures at predefined intervals.
The flash is designed not to work in this mode in order to enable quick succession of shots.
Date Imprint
Include a Date/Time stamp in the photo image. There are three options available:
There are five available options:
• OFF: Turn off the Continuous Shot function.
• Continuous shooting: Press and hold the shutter button to shoot continuously until you release the shutter or until the memory card has run out of space.
• 3 shot: Capture up to 3 consecutive pictures.
• 3 shots (Last): Capture pictures continuously until the
Shutter button is released. Only the last 3 shots will be recorded.
• Off
• Date
• Date and Time
45
Quick Review
This setting refers to the quick photo review immediately after taking a picture. The picture stays on the LCD screen for an adjustable period of time.
Digital Zoom
Use this setting to enable or disable the digital zoom function.
When disabled, only the optical zoom is enabled.
46
Four options are available:
• Off
• 1 sec
• 2 sec
• 3 sec
Slow Shutter
In Slow shutter mode, the shutter will remain open as long as the Shutter button is held down. This gives you control over the duration of the exposure. (The slow shutter mode is available only in
M
manual mode).
• Manual : To set a long exposure time between 2~30 sec.
The use of tripod is recommended for prolonged exposure times.
47
Movie Menu
Mode:
In the Movie Mode, press the button to access the Movie
Setup menu.
To configure each setting:
1. In the Menu screen, switch between the Movie Setup or different Camera Setup pages using the Left/Right button, select the page with the function you want to adjust and press the Down button.
3. Press the Up/Down button to select an option or the Left or button to return to the menu.
4. Press the button to confirm the setting and return to the previous menu.
Refer to the following pages for more details about each setting.
48
2. Press the Up/Down arrow button to select the function to be set, and Press the or Right button to enter the submenu.
49
48
Continuous AF
The camera continuously focuses on a moving subject such as a sports player.
Expo Metering (Exposure Metering)
This setting determines what part of the picture the camera uses to determine the correct exposure for the whole picture.
Three options are available:
• Spot
• Center
• AiAE (Artificial Intelligence AE)
Playback Menu
Mode :
In Playback mode, press the button to enter the Play-
back menu.
Protect
To prevent pictures or videos from being accidentally erased, use this setting to lock one or all of the files.
50
Please refer to the following sections for detailed instructions on the various menu options.
To protect/unprotect a picture or video:
1. Use the Up/Down arrow button and select Protect. then press the or Right button to enter the submenu.
51
50
2. Use the Up/Down button and select "One" to protect individual photos or movies; or select "All" to protect all photos and movies stored in the memory card. Press the button to confirm and enter the photo/movie protection interface.
3. Press the button and select Yes to lock displayed photos or videos, or select Unprotect to unlock them, then press the Up/Down button and select Back to return to the playback menu.
Selecting "reset" will un-protect all previously protected photos and videos.
Delete
There are three ways to delete files.
• Delete One:
1. In the Delete setting, select Delete One and then press the or Right button.
2. Press the Left/Right button to locate the photo or video to be deleted. Press the Up/Down button to select item (Yes: to delete the file or, Cancel: to return to previous menu) and then press to confirm.
52
• Delete All:
1. In the Delete setting, select Delete All and then press the
or Right button.
2. Use the Up/Down button and select Yes to delete all files, or select Cancel to return to the menu.
• Delete Date Folder:
1. In the Delete option, press the or button after selecting date folder.
2. Use the Up/Down button to select a Date Folder to be deleted, press to confirm, press the Up/Down button to select item (Yes: to delete the file or, Cancel: to return to the menu) and then press to confirm.
DPOF (Digital Print Order Format)
DPOF allows you to record a selection of pictures that you would like to print, and will save your selection in the memory card, so that you can simply hand your memory card to a photo kiosk without having to tell them which photos you would like to print.
The “ ” indicator means a file is protected. File protection must be removed first before a file can be deleted.
Deleting files will cause DPOF settings to be reset.
Trim
The Trim setting allows you to trim an area of a selected photo and save it as a new photo.
To trim a picture:
1. Select the Trim setting from the menu.
2. Using the Left/Right buttons, locate the photo that you want to trim and have it displayed on the LCD.
3. Select “Yes” to confirm trimming, then use the zoom wheel and direction buttons to select the part to be cut.
HDR-High Dynamic Range
With the HDR function, pictures that are overexposed may be corrected by optimizing the highlights and lowlights captured to more accurately represent the actual scene.
1. Select the HDR setting in the menu as described previously.
2. Press the Left and Right button to find pictures you want to optimize and then select Confirm to perform HDR optimization or select Return to go back to Playback menu.
4. Press button and ‘Save Changes?’ will appear. Select
“O” to confirm changes and save it as a new image, or select “X” to cancel changes and return to the previous menu.
The image can not be cropped again when it is cropped to 640X480.
3. After HDR optimizing, the image will be saved as another file with the icon as a prompt, the original file will still remain in the memory.
53
Resize
This setting allows you to resize a picture to a specified resolution, and saves it as a new picture.
1. Select the Resize setting from the Playback menu as described previously.
Rotate
You can use this setting to change the picture orientation of the picture.
1. Select the Rotate setting from the Playback menu as described previously.
2. Use the Left/Right navigation buttons to select a picture to rotate.
3. Use the Up/Down navigation buttons to select the direction of rotation or Back to cancel and return to the
Playback menu.
2. Use the Left/Right navigation buttons to select a picture to resize.
3. Use the Up/Down navigation buttons to select a resolution ( 1024X768 or 640X480) to resize the image or
Back to cancel and return to the Playback menu.
4. Press the button to confirm the setting.
Resizing an image creates a new file that contains the image in the size you select. The file with the original image also remains in the memory.
4. Press the button to confirm the setting.
The panorama picture and video cannot be rotated.
Revolved file will replace the original one.
55
54
Red-eye Reduction
Use this setting to remove red eye in your photos.
1. Select the Red-eye Reduction in the Playback menu as described previously.
2. Use the Left/Right button to select the picture from which red eye needs to be removed.
3. Use the Up/Down navigation buttons and select Yes to fix the selected image or Back to cancel and return to the
Playback menu.
Display Setup
Mode:
Press button in Playback mode to enter Display Setup menu.
4. Press the button to confirm the setting.
For best results, the face of the subject should be relatively large on the LCD screen, the subject should be facing the camera as directly as possible, and the eyes should be as large as possible.
If there is no red eyes in the image, press button after selecting “ Yes”, such prompt will appear on the screen: red eye is not detected!
Refer to the following sections for details of every setting.
55
Slideshow
This setting allows you to view all the stored pictures as a slideshow.
1. Select Slide Show menu, then press the or Right button to enter the slide show setup interface.
2. Press the Up/Down button to select effect, interval, repeat or music, and press the or Right button to enter and adjust settings. press the button to confirm settings.
Wallpaper Settings
Use this setting to use your favorite picture to use as a background on the LCD screen.
1. Press the Down button to select the Wallpaper Setting menu.
56
3. Use the Up/Down navigation buttons and select Start to run the slideshow or Cancel to return to the Playback menu.
4. Press the button to confirm the setting.
2. Press the or Right button to enter the wallpaper setup interface.
Menu Wallpaper:
Use the Up/Down button to select the Menu Wallpaper option, then press the button to confirm or press the Left button to return to last page, and press to exit the menu.
Startup Screen:
Use the Up/Down button to select the Startup Screen option, press to confirm or press the Left button to the return to last page, and press to exit the menu.
• User
• Nature
• Sparkling
• User
• GE logo
57
Back To Default:
Use the Up/Down button and select Set Back To Default, then press to confirm or press the Left button to return to last page, and press to exit the menu.
• Yes
• No
59
58
Setup Menu
Mode :
M
The Setup menu for the camera is available in all modes. Each menu page can be selected by pressing the button and switching between menus with the Left/Right button.
2. Switch between different functions with the Up/Down button.
3. Press the or Right button to enter the submenu.
After selecting a function option, you can press the Up button to return to the menu for other Camera Setup pages. Or you can press the Down button to switch to the next menu page.
Refer to the following pages for more details about each setting.
To adjust the settings:
1. Select the menu page with the function you want to adjust and press the Down button.
59
Beep
Use this setting to adjust beep volume, shutter button, self timer, power on, and power off tones.
To change these settings:
1. Select the Beep setting from the Setup menu as described previously.
2. Use the Up/Down navigation buttons to switch between volume, shutter tone, key tone, self-timer tone, and power tone options.
LCD Brightness
Use this setting to adjust the brightness of your LCD screen.
1. Select the LCD Brightness setting from the Setup menu as described previously.
2. Select auto or adjust the brightness level using the
Left/Right button, and press the button to confirm the setting.
60
3. Press the or Right button to enter, and Press the Up/
Down button to adjust volume and change various sounds, then Press the button to confirm the setting.
Power Saver
This setting allows you to save power and get the maximum possible running time for your battery. Follow the steps below to turn off the LCD screen and camera automatically after a period of inactivity.
1. Select the Power Save setting from the Setup menu as described previously.
2. Press the Up/Down button to select either screen power or camera power, then press the or Right button to enter.
• LCD off:
On, 30 sec, 1 Min, 2 Min.
• Camera off:
On, 3 Min, 5 Min, 10 Min.
4. Press the button to confirm.
Zone
The Zone setting is a useful function on your overseas trips.
This feature enables you to display the local time on the LCD screen while you are overseas.
1. Select the Zone setting from the Setup menu as described previously. The world time screen will appear.
2. Use the Up/Down navigation buttons to switch between the hometown ( ) and travel destination ( ) fields.
3. Use the Left/Right navigation buttons to select a city close to the desired time zone. Then press the button to confirm.
3. Press the Up/Down button to adjust the selected item.
Both items have the following options:
61
62
Date/Time
See “ Setting the Date and Time“ section on page 16.
Language
See “ Setting the Language“ section on page 15.
File and Software
Format Memory
Please note: formatting enables you to delete all contents in the memory card and built-in memory, including protected photo and movie files.
To use this setting:
1. Select Format Memory in the File and Software menu.
2. Use the Up/Down navigation buttons to select Yes or No.
Then press the button to confirm.
3. Select Yes, and the camera will format the selected media.
4. Please note that when you perform the Format Memory function, it only formats the active memory. If a memory card is inserted, the memory card is active and will be formatted. If there is no memory card, the internal memory is active and the internal memory will be formatted.
Formatting the memory card will not automatically format the internal memory.
63
62
File Numbering
After you take a picture or video clip,the camera will save it in a sequential number. You can use this to reset the file numbering to 1. (When more than 999 images are on the memory card, the use of this features will have no effect).
1. Select the File Name in File and Software menu.
2. Select the option with the Up/Down button and press the
button for confirmation.
Copy to Card (Copy internal memory to memory card)
Use this setting to copy the files stored in the internal memory to the memory card.
1. Select the Copy to memory card in the File and Software menu.
2. Use the Up/Down navigation buttons to select Yes or No.
Then press the button to confirm.
Reset Settings
Use this setting to restore the camera to its default settings.
1. Select Reset Settings in the File and Software menu.
2. Use the Up/Down navigation buttons to select Yes or No.
Then press the button to confirm.
FW Version (Firmware Version)
Use this setting to view the camera's firmware version.
1. Select the FW Version in the File and Software menu.
2. If you have uploaded the latest firmware version to your
SD card, upgrade accordingly as necessary.
To update to the latest firmware version, you can go to the following website: www.ge.com/digitalcameras and look under Support.
65
64
Transmission
Video System
Use this setting to configure your video system to your current area.
1. Select the Video System in the Connection Setup menu.
2. Use the Up/Down navigation buttons to select NTSC or
PAL. Then press the button to confirm.
The video output signal can be switched to NTSC or PAL to accommodate different regional standards. The appropriate setting will vary between regions.
NTSC: USA, Canada, Taiwan, Japan, etc.
PAL: Europe, Asia (excluding Taiwan), Oceania, etc.
Note: The TV output will not perform properly if an incorrect video system is selected.
65
Connect Your Camera to an HDMI TV to View Videos
HDMI (High Definition Multimedia Interface), is a fully digital audio/video transmission interface, through which uncompressed audio and video signals are transmitted.
Direct transmission of digital video signals to your TV reduces conversion loss and improves image quality.
Connecting the camera to an HDMI TV
1. Use a high-definition output terminal cable (optional) to connect your camera to an HDMI compliant TV.
2. The camera will automatically determine if the connected display supports 1080i resolution. If the display supports the resolution, select the resolution you prefer in the menu shown on the camera and the monitor will display the images at the specified resolution. If the monitor does not support the resolution, it will automatically display images at the highest resolution possible.
3. Once an output format is selected, the LCD screen in the camera will go blank (although it is still on) and your TV will then display the images and menus.
Note that your camera and TV should be turned off before connecting them.
Refer to your TV instruction manual for information on what resolution sizes it will support. The resolution and output formats that are not supported will be grayed out on the camera's LCD screen.
Connecting to a PC
Use the USB cable supplied with your camera to copy (transfer) pictures to a computer.
Setting the USB Mode
Since the camera’s USB port can be set to connect with either a PC or a Printer, the following steps will ensure that the camera is correctly configured to connect with a PC. The USB mode is set to PC by default.
1. Enter the camera setup menu and select USB Mode with the Up/Down button, then press the or Right button to enter.
2. Use the Up/Down navigation buttons and select PC.
3. Press the button to confirm the setting.
Transferring Files to Your PC
The computer will automatically detect the camera as a removable drive. Double-click the My Computer icon on the desktop to locate the removable drive and to copy the folders and files in the drive to a directory on your PC as you would copy any other folder or file.
By using the USB cable, you can transfer the captured photos and videos to a PC. Follow the steps below to connect the camera to a PC.
1. Make sure both the camera and PC are turned on.
2. Connect one end of the supplied USB cable to the USB/AV
OUT port on your camera.
3. Connect the other end of the cable to an available USB port on your PC.
Windows operating system (Windows 2000, Windows XP,
Windows Vista, Windows 7.)
Click the [Safely remove the hardware] icon and remove the USB connector according to the displayed menu.
4. Disconnect the camera once the transfer is completed.
If the USB option is set to [PC] :
Turn the camera off and disconnect the USB cable.
If the USB option is set to [PC (PTP) ] :
Remove the camera from the system as described below before turning the camera off and disconnecting the USB cable.
Macintosh
Drag the untitled icon to the Trash. ("Untitled")
69
68
Connecting to a PictBridge Compatible Printer
PictBridge allows printing images from a memory card in a digital camera directly to a printer, regardless of brand. To find out if a printer is PictBridge compatible, simply look for the PictBridge logo on the packaging or check the printer manual. With the PictBridge function on your camera, you can print the captured photos directly with a PictBridge compatible printer using the supplied USB cable, without the need for a PC.
Setting the USB Mode
Since the camera’s USB port can be set to connect with either a PC or a Printer, the following steps will allow you to ensure that the camera is correctly configured to connect with a
Printer.
1. Enter the camera setup menu to select USB Mode with
Up/Down, then press the or Right button to enter.
2. Use the Up/Down button to select Printer.
3. Press the button to confirm the setting.
After the camera is reset, it will switch to PC mode automatically from USB mode.
69
Connecting the Camera and Printer.
1. Make sure both the camera and printer are turned on.
2. Connect one end of the supplied USB cable to the USB port on your camera.
3. Connect the other end of the cable to the USB port on the printer.
If the camera is not connected to a PictBridge compatible printer, the following error message will appear on the LCD screen.
The above error message would also appear if the USB mode were set incorrectly, in which case you should disconnect the USB cable, check the USB mode settings, ensure that the Printer is turned on, and then try connecting the USB cable again.
71
70
Using the PictBridge Menu
After setting the USB mode to Printer, the PictBridge menu will appear:
Print with Date
If you have set the date and time of your camera, the date and time will be recorded and saved with each photo you take.
1. Select Print with date from the PictBridge menu. The following screen will appear:
Press the Up/Down button to select a menu item, then Press the or Right button to enter this item.
Refer to the following sections for more detailed information on each setting.
2. Use the Left/Right navigation buttons to scroll through the photos.
71
3. Use the Up/Down navigation buttons to select the number of prints for the current displayed photo.
4. Press the button and the following screen will appear:
Print without Date
Use this setting to print the photos without dates on them.
1. Select Print without date from the PictBridge menu.
The following screen will appear:
72
5. Select Yes to confirm the printing, or Cancel. Then press the button.
2. Use the Left/Right navigation buttons to scroll through the images.
3. Use the Up/Down navigation buttons to select the number of prints for the current displayed image.
4. Press the button and the following screen will appear:
5. Select Yes to confirm the printing, or Cancel. Then press the button.
Print Index
You can use this setting to print all indexes to show all photos currently in your camera.
1. Select Print index from the PictBridge menu. The following screen will appear:
2. Select Yes to confirm the printing, or Cancel. Then press the button .
73
Print DPOF (Digital Print Order Format)
To use DPOF printing, you must select the photos for printing using the DPOF settings before hand. see the “ DPOF” section on page 52.
1. Select Print DPOF from the PictBridge menu. The following screen will appear:
Exit
To exit the PictBridge menu, select Exit. The “Remove USB cable” message will be displayed.
2. Select Yes to confirm the printing, or Cancel. Then press the button.
Disconnect the USB cable from the camera and printer.
75
74
APPENDICES
Specifications
Design and specifications are subject to change without notice.
Effective Image Sensor Pixels
Image Sensor
Focal Length F =
Lens
35mm film equivalent
F number
Construction
Optical Zoom
Anti-Handshake
Digital Zoom
Focusing Range
16.0 Megapixels
16.5 Megapixels [1/2.33” (CCD)]
5.1mm (Wide) ~ 40.8mm (Tele)
28mm (Wide) ~ 224mm (Tele)
F3.3 (Wide) ~ F5.8 (Tele)
12 elements in 8 groups
8X
Normal: (Wide) 60cm ~∞, (Tele) 100cm ~ ∞;
Macro: (Wide) 5cm ~ ∞
OIS
6X digital zoom (Combined Zoom: 48X)
75
76
Number of
Recording
Pixels
Still Image
Movie
Image Compression
DCF, DPOF (Ver1.1) Support
File Format
Still Image
Movie
Shooting Modes
Smile Detection
Blink Detection
Face-Detection
Red-eye Removal
16MP, 12MP(16:9), 8MP, 5MP, 3MP, 2MP(16:9), 0.3MP
1280x720pixels: 30fps/15fps, 640x480pixels: 30fps/15fps,
320x240pixels: 30fps/15fps
Best, Fine, Normal
Yes
Yes
Yes
Yes
Yes
Exif 2.2 (JPEG)
MPEG-4/H.264, Audio: G.711 [Monaural]
Auto, Manual, Auto-Scene, Scene ( Sport, Indoor, Snow, Fireworks, Museum, Night
Landscape, Children, Leaf, Sunset, Glass, Landscape, Night Portrait, Beach,
Text, Gathering, ID, Fish eye, Travel shooting, Photo frame, Sketch ), Portrait,
Panorama, Video
Pan-Capture Panorama
LCD Display
ISO Sensitivity
AF Method
Light Metering Method
Exposure Control Method
Exposure Compensation
Shutter Speed
Continuous Shooting
Playback Modes
White Balance Control
Yes
3.0 inch (230,400 pixels) LTPS (low-temperature polycrystalline silicon) TFT color
LCD
Auto, ISO 64/100/200/400/800/1600/3200
Single AF, Multi-AF (TTL 9-point), AF Assist Light (On/Off)
Artificial Intelligence AE (AiAE), Center-weighted Average, Spot (Fixed to center of frame)
ProgramAE (AE-lock available)
±2 EV in 1/3 Step increments
4 ~ 1/2000 second (Manual 30 s)
Approx. 1.39 fps (Large/Fine mode)
Single Photo, Index (9/16 thumbnails), Slide Show, Movie (Slow-Motion possible),
Zoom (Approx. 2X~8X), Audio, Histogram Display
Auto (AWB), Daylight, Cloudy, Fluorescent , Fluorescent CWF, Incandescent,
Manual
77
Internal Flash (Shooting Range)
Recording Media
Other Features
Jacks
Power
Shooting Capability (Battery Performance)
Operation Environment
Dimensions (W x H x D)
Mass
Auto/Red-Eye Reduction/Forced Flash/No Flash/Slow Synchro/Red-Eye
Reduction+Slow Synchro
Shooting Range Wide: Approx. 0.5m~5.0m / Tele: Approx. 0.5m ~ 2.8m
Internal Memory: 30MB
SD Card/SDHC Card (Up to 32GB support)
PictBridge, ExifPrint Support, Multi-language Sup port
USB2.0/AV-OUT , HDMI
Rechargeable Lithium-ion Battery GB-10, 3.7V 700mAh
Approx. 180 shots (based on CIPA Standards)
Temperature: 0~40 o C, Humidity: 0~90%
98.3mm x 56.8mm x (19.0~24.4) mm
Approx. 135g (Body only)
79
78
Error messages
Messages
Card error
Card full
Write protect
Picture error
No picture
Lens error
System error
WRITE PROTECT
Out of the range
Explanation
• The memory card is not formatted.
• The memory card is full and cannot store any new images.
• The memory card is write-protected.
• The picture is not captured correctly.
• The picture is corrupted.
• There are no images in the memory card or in the internal memory.
• The lens is probably stuck and the camera will power off automatically.
• Unexpected error encountered.
• The write protection switch in the memory card is set to the “LOCK” position.
• When pictures were taken in Panorama mode, the direction of movement was incorrect.
79
Messages
Card is not formatted, format?
Explanation
• Confirm whether the memory card should be formatted.
This image cannot be deleted • The picture or video you are trying to delete is protected.
Warning!! Camera recording, please wait.
• No other actions allowed to perform during video/audio recording.
Warning!! Battery exhausted.
This file cannot be played back
No connection
Print error
Cannot print
• The battery is out of charge.
• The picture format cannot be recognized by the camera.
• The camera is not connected to the printer correctly.
• There is a problem with camera or printer.
• Check that the printer is out of paper or out of ink.
• Check if the printer has a paper jam.
81
80
Troubleshooting
Problem
Camera does not turn on.
Camera turns off suddenly during operation.
The picture is blurred.
Images and video files cannot be saved.
No picture is taken when pressing the Shutter button.
Images cannot print from the connected printer.
Possible causes
• The battery has run out.
• The battery is not inserted correctly.
• The battery has run out.
Solution
• Replace with a fully charged battery.
• Replace with a fully charged battery.
• The lens is dirty.
• appears when taking pictures.
• The memory card is full.
• The memory card is full.
• No available space to store the files.
• The mode dial is in Playback mode.
• The camera is not connected to the printer correctly.
• The printer is not PictBridge compatible.
• The printer is out of paper or out of ink.
• The paper is jammed.
• Use a soft cloth to clean the lens on your camera .
• Use the Image Stabilization mode.
• Replace the memory card with a new one.
• Delete unwanted images.
• Unlock the memory card.
• Replace the memory card with a new one or format the current memory card.
• Delete unwanted images.
• The memory card is locked.
• Check the connection between the camera and printer.
• Use a PictBridge compatible printer.
• Load some paper in the printer.
• Replace the ink cartridge in the printer.
• Remove the jammed paper.
81
82
Problem
Write to memory card slowly
Cannot write to the memory card
Too many movies to process
Exceed maximum folder number in the memory card
Possible causes
• When movie above HD is recorded into the memory card below Class
4, perhaps it is too slow to continue recording.
• Memory card is in write-protection state.
• When shooting or recording, writeprotection interruption phenomenon in the memory card (such as due to too slow storage etc.) leads that you can not continue to shoot or record. .
• The number of pictures or binders in the memory card exceeded the specifications, so the playback of data folder can not be displayed.
• “Yes” is selected for “File No” menu in the Menu (see P63 for detailed instructions).
Solution
• Please select HCSD or shoot after formatting this card.
• Please replace a memory card.
• Please shoot again.
• Delete needless files.
• Transfer the files in the memory card to other area.
• Transfer the files in the memory card to other area.
• Set “No” for “File No”.
http://www.ge.com/digitalcameras
© 2011 General Imaging Company Printed in China

Public link updated
The public link to your chat has been updated.
Advertisement
Key features
- 16-megapixel sensor for high-resolution images
- 3x optical zoom lens for getting closer to your subjects
- 2.7-inch LCD screen for easy viewing and framing your shots
- Variety of shooting modes, including auto, scene, and video
- Compact size and user-friendly interface
- Perfect for taking photos and videos on the go