Grizzly Extreme Series G0455/G0480 jointer Owner's Manual

Below you will find brief information for jointer Extreme Series G0455/G0480. The Grizzly Extreme Series G0455/G0480 is a 10-inch jointer that is designed for heavy-duty use, and provides a smooth and accurate finish. Its features include a heavy-duty cast iron table, a powerful motor, and a precision-ground cutterhead. This jointer can be used for a variety of tasks, such as jointing edges, flattening boards, and creating rabbets, tenons, and other woodcraft tasks.

PDF Download
Document
Grizzly Extreme Series G0455/G0480 Jointer Owner's Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key Features

  • Heavy-duty cast iron table
  • Powerful motor
  • Precision-ground cutterhead
  • Outfeed table height adjustment
  • Cutterhead guard safety features
  • Pedestal switch
  • Knife setting jig
  • Spiral cutterhead hardware

Frequently asked questions

What is the purpose of the cutterhead guard?

The cutterhead guard is a critical safety feature that helps protect the operator from injury. It is designed to return to its proper position over the cutterhead after a cutting operation thanks to a torsion spring. Ensure the torsion spring is properly installed and has pressure as it is critical for the guard to function correctly.

How do I set the outfeed table height?

To set the outfeed table height, rotate the table height adjustment knob located on the jointer's pedestal. This will allow you to adjust the table height based on the thickness of the wood you are working with.

What are the wiring requirements for this jointer?

The jointer needs a properly grounded outlet to prevent electrocution or fire hazards. Check local building codes for proper wire size recommendations and call a qualified electrician if you are unsure of your electrical configuration.
Preparing document for printing…
0%