Haier 42EP24STV Flat Panel Television User Manual

Haier 42EP24STV Flat Panel Television User Manual

Dimensions

<Units: mm (inch)>

LCD Projector Commercial Use

Operating Instructions

Model No.

PT-L735NTE

PT-L735E

R

16(-5/8)

248(9-3/4)

*Not including lens and projecting parts

Trademark acknowledgements

B The SD logo is a trademark.

B Windows is a trademark or registered trademark of Microsoft Corporation in the United States of America and other countries.

B VGA and XGA are trademarks of International Business Machines

Corporation.

B Macintosh is a registered trademark of Apple Computer, Inc.

B S-VGA is a registered trademark of the Video Electronics Standards

Association.

All other trademarks are the property of the various trademark owners.

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

R-CLICK ENTER

FREEZE SHUTTER

FUNC1 STD

Computer Projector

66-E

NGLISH

These Operating Instructions are printed on recycled paper.

Before operating this product, please read the instructions carefully and save this manual for future use.

TQBJ 0126-1

Dear Panasonic Customer:

This instruction booklet provides all the necessary operating information that you might require. We hope it will help you to get the most performance out of your new product, and that you will be pleased with your Panasonic LCD projector.

The serial number of your product may be found on its bottom. You should note it in the space provided below and retain this booklet in case service is required.

Model number: PT-L735NTE / PT-L735E

Serial number:

IMPORTANT SAFETY NOTICE

WARNING: THIS APPARATUS MUST BE EARTHED.

WARNING: To prevent damage which may result in fire or shock hazard, do not expose this appliance to rain or moisture.

Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB

(A) according to ISO 7779.

WARNING:

1) Remove the plug from the wall outlet when this unit is not in use for a prolonged period of time.

2) To prevent electric shock, do not remove cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

3) Do not remove the earthing pin on the power plug. This apparatus is equipped with a three prong earthing-type power plug. This plug will only fit an earthing-type power outlet. This is a safety feature. If you are unable to insert the plug into the outlet, contact an electrician. Do not defeat the purpose of the earthing plug.

Caution: To assure continued compliance, use only shielded interface cables when connecting to computers or peripheral devices.

Any unauthorized changes or modifications to this equipment will void the user's authority to operate.

2-E

NGLISH

IMPORTANT: THE MOULDED PLUG (U.K. only)

FOR YOUR SAFETY, PLEASE READ THE FOLLOWING TEXT

CAREFULLY.

This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, please ensure that the replacement fuse has a rating of

13 amps and that it is approved by ASTA or BSI to BS1362.

If the plug contains a removable fuse cover, you must ensure that it is refitted when the fuse is replaced. If you lose the fuse cover, the plug must not be used until a replacement cover is obtained. A replacement fuse cover can be purchased from an Authorised Service Centre.

If the fitted moulded plug is unsuitable for the socket outlet in your home, then the fuse should be removed and the plug cut off and disposed of safely. There is a danger of severe electrical shock if the cut off plug is inserted into any 13 amp socket.

If a new plug is to be fitted, please observe the wiring code as shown below.

If in any doubt, please consult a qualified electrician.

WARNING: — THIS APPLIANCE MUST BE EARTHED.

IMPORTANT: — The wires in this mains lead are coloured in accordance with the following code: —

Green-and-Yellow: Earth

Blue:

Brown:

Neutral

Live

As the colours of the wire in the mains lead of this appliance may not correspond with the coloured markings identifying the terminals in your plug, proceed as follows.

The wire which is coloured GREEN-AND-YELLOW must be connected to the terminal in the plug which is marked with the letter E or by the

Earth symbol or coloured GREEN or GREEN-AND-YELLOW.

The wire which is coloured BLUE must be connected to the terminal in the plug which is marked with the letter N or coloured BLACK.

The wire which is coloured BROWN must be connected to the terminal in the plug which is marked with the letter L or coloured RED.

How to replace the fuse. Open the fuse compartment with a screwdriver and replace the fuse.

13A250V

BS1363/A

L

ASA

HE-8

N

FUSE

E

NGLISH

-3

Contents

Preparation

IMPORTANT SAFETY NOTICE ...2

Precautions with regard to safety .........................................5

Accessories .................................9

Before use ..................................10

Location and function of each part...........................................12

Inserting the wireless card .......17

Getting started

Setting-up ...................................18

Projection methods, Projector position, Projection distances

Connections ...............................20

Example of connecting to video equipments, Example of connecting to computer

Preparation for the remote control unit..............................22

Basic Operation

Turning on the power ................23

Turning off the power................25

Useful functions

Correcting keystone distortion and automatic positioning.....27

Turning off the picture and sound momentarily ............................28

Pausing a picture.......................28

Enlarging the picture.................29

Adjusting the volume ................29

Useful functions of the remote control unit..............................30

Laser beam pointer, Wireless mouse

Adjustments and settings

On-screen menus ......................32

Menu screens, Menu operation guide, Returning a setting to the factory default

Adjusting the picture.................37

PICTURE MODE, CONTRAST,

BRIGHT, COLOR, TINT,

SHARPNESS, Colour Hue Setting,

4-E

NGLISH

Noise Reduction (NR), WHITE

BALANCE R/G/B, TV-SYSTEM,

Projecting sRGB-compatible pictures

Adjusting the position...............40

POSITION, DOT CLOCK, CLOCK

PHASE, KEYSTONE, OSD POSION,

ASPECT, RESIZING,

AUTO SETUP, FRAME LOCK

Audio adjustment ......................44

VOLUME, MUTE, AUDIO MODE

Changing the display language...44

Option settings ..........................45

OSD, AUTO SEARCH,

AUTO SIGNAL, AUTO KEYSTN,

RGB2 SELECT, RGB/YP

B

P

R

,

VGA60/525P, BLACKBOARD,

BACK COLOR, FRONT/REAR,

DESK/CEILING, FAN CONTROL,

LAMP POWER, LAMP RUN TIME,

FUNC 1, CONTROL KEY,

AUTO POWER OFF

Network setup ............................48

SD card setup ............................48

Setting up the SECURITY function ...................................49

PASSWORD SETTING, CHANGE

PASSWORD, TEXT DISPLAY,

CHANGE TEXT, LOGO DISPLAY,

CLEAR, CAPTURE

Care and maintenance

When the TEMP indicator and the

LAMP indicator are illuminated...52

Cleaning and replacing the air filter ..............................54

Replacing the lamp unit ............55

Before calling for service..........58

Cleaning and maintenance .......59

Others

Specifications ............................60

Appendix ....................................62

List of compatible signals,

Connector pin wiring, Projection dimensions calculation methods,

Using the SERIAL connector

Dimensions ................................66

Trademark acknowledgements...66

Precautions with regard to safety

WARNING

If a problem occurs (such as no image or no sound) or if you notice smoke or a strange smell coming from the projector, turn off the power and disconnect the mains lead from the mains socket.

B Do not continue to use the projector in such cases, otherwise fire or electric shocks could result.

B Check that no more smoke is coming out, and then contact an Authorised

Service Centre for repairs.

B Do not attempt to repair the projector yourself, as this can be dangerous.

Do not install this projector in a place which is not strong enough to take the full weight of the projector.

B If the installation location is not strong enough, it may fall down or tip over, and severe injury or damage could result.

Installation work (such as ceiling suspension) should only be carried out by a qualified technician.

B If installation is not carried out correctly, there is the danger that injury or electric shocks may occur.

If foreign objects or water get inside the projector, or if the projector is dropped or the cabinet is broken, turn off the power and disconnect the mains lead from the mains socket.

B Continued use of the projector in this condition may result in fire or electric shocks.

B Contact an Authorised Service Centre for repairs.

Do not overload the mains socket.

B If the power supply is overloaded (for example, by using too many adapters), overheating may occur and fire may result.

Do not remove the cover or modify it in any way.

B High voltages which can cause fire or electric shocks are present inside the projector.

B For any inspection, adjustment and repair work, please contact an

Authorised Service Centre.

Clean the mains lead plug regularly to prevent it from becoming covered in dust.

B If dust builds up on the mains lead plug, the resulting humidity can damage the insulation, which could result in fire. Pull the mains lead out from the mains socket and wipe it with a dry cloth.

B If not using the projector for an extended period of time, pull the mains lead plug out from the mains socket.

E

NGLISH

-5

Do not do anything that might damage the mains lead or the mains lead plug.

B Do not damage the mains lead, make any modifications to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.

B If the mains lead is used while damaged, electric shocks, short-circuits or fire may result.

B Ask an Authorised Service Centre to carry out any repairs to the mains lead that might be necessary.

Do not handle the mains lead plug with wet hands.

B Failure to observe this may result in electric shocks.

Insert the mains lead plug securely into the mains socket.

B If the plug is not inserted correctly, electric shocks or overheating could result.

B Do not use plugs which are damaged or mains sockets which are coming loose from the wall.

Do not place the projector on top of surfaces which are unstable.

B If the projector is placed on top of a surface which is sloped or unstable, it may fall down or tip over, and injury or damage could result.

Do not place the projector into water or let it become wet.

B Failure to observe this may result in fire or electric shocks.

Do not place liquid containers on top of the projector.

B If water spills onto the projector or gets inside it, fire or electric shocks could result.

B If any water gets inside the projector, contact an Authorised Service

Centre.

Do not insert any foreign objects into the projector.

B Do not insert any metal objects or flammable objects into the projector or drop them onto the projector, as doing so can result in fire or electric shocks.

Keep the SD memory card (PT-L735NTE only) and batteries out of the reach of infants.

B If the memory card or batteries are swallowed, death by suffocation may result. If you believe that the memory card or batteries may have been swallowed, seek medical advice immediately.

Do not allow the + and - terminals of the batteries to come into contact with metallic objects such as necklaces or hairpins.

B Failure to observe this may cause the batteries to leak, overheat, explode or catch fire.

B Store the batteries in a plastic bag and keep them away from metallic objects.

During a thunderstorm, do not touch the projector or the cable.

B Electric shocks can result.

Do not use the projector in a bath or shower.

B Fire or electric shocks can result.

6-E

NGLISH

Do not look into the lens while the projector is being used.

B Strong light is emitted from the projector’s lens. If you look directly into this light, it can hurt and damage your eyes.

B Be especially careful not to let young children look into the lens. In addition, turn off the power when you are away from the projector.

Keep the remote control unit out of the reach of children, and do not look into the laser beam or point it towards other people.

B If the laser beam which is emitted by the remote control unit transmitter is pointed directly into the eyes, it may cause visual ability to be impaired.

Do not bring your hands or other objects close to the air outlet port.

B Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result.

When replacing the lamp, allow it to cool for at least one hour before handling it.

B The lamp cover gets very hot, and contact with it can cause burns.

Before replacing the lamp, be sure to unplug the mains lead from the power outlet.

B Electric shocks or explosions can result if this is not done.

Caution

Do not cover the air inlet or the air outlet.

B Doing so may cause the projector to overheat, which can cause fire or damage to the projector.

B Do not place the projector in narrow, badly ventilated places such as closets or bookshelves.

Do not set up the projector in humid or dusty places or in places where the projector may come into contact with smoke or steam.

B Using the projector under such conditions may result in fire or electric shocks.

When disconnecting the mains lead, hold the plug, not the cord.

B If the mains lead itself is pulled, the cord will become damaged, and fire, short-circuits or serious electric shocks may result.

Always disconnect all cables before moving the projector.

B Moving the projector with cables still attached can damage the cables, which could cause fire or electric shocks to occur.

Do not place any heavy objects on top of the projector.

B Failure to observe this may cause the projector to become unbalanced and fall, which could result in damage or injury.

Do not short-circuit, heat or disassemble the batteries or place them into water or fire.

B Failure to observe this may cause the batteries to overheat, leak, explode or catch fire, and burns or other injury may result.

E

NGLISH

-7

When inserting the batteries, make sure the polarities (+ and -) are correct.

B If the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.

Use only the specified batteries.

B If incorrect batteries are used, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.

Do not mix old and new batteries.

B If the batteries are inserted incorrectly, they may explode or leak, and fire, injury or contamination of the battery compartment and surrounding area may result.

Do not put your weight on this projector.

B You could fall or the projector could break, and injury may result.

B Be especially careful not to let young children climb onto the projector.

Disconnect the mains lead plug from the mains socket as a safety precaution before carrying out any cleaning.

B Electric shocks can result if this is not done.

Do not install the accessory wireless card to any device other than the

card slot of the projector. (PT-L735NTE only)

B If this is not observed, damage to the device may result.

Ask an Authorised Service Centre to clean inside the projector at least once a year.

B If dust is left to build up inside the projector without being cleaned out, it can result in fire or problems with operation.

B It is a good idea to clean the inside of the projector before the season for humid weather arrives. Ask your nearest Authorised Service Centre to clean the projector when required. Please discuss with the Authorised

Service Centre regarding cleaning costs.

We are constantly making efforts to preserve and maintain a clean environment. Please take non repairable units back to your dealer or a recycling company.

8-E

NGLISH

Accessories

Check that all of the accessories shown below have been included with your projector.

Remote control unit

(N2QAEA000015 x1)

AAA batteries for remote control unit (x2)

RGB signal cable

[3.0 m (9´10˝),

K1HB15FA0001 x1]

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

Video/Audio cable

[3.0 m (9´10˝),

K2KA2FA00001 x 1]

Power cord for U.K.

(K2CT3FZ00001 x 1)

R-CLICK

ENTER

FREEZE SHUTTER

FUNC1 STD

Computer Projector

Carrying bag

(TPEP010 x1)

Power cord for

Continental Europe

(K2CM3FZ00001 x 1)

USB cable

(K1HB04FD0002 x 1)

PT-L735NTE only

CD-ROM

(TQBH9004 x1)

SD memory card

(8 MB,

RP-SD008BEZ0 x1)

Wireless Card

(N5HBD0000024 x1)

Protective case for SD memory card

(RP-SDCC0 x1)

Hexagon wrench

(TKLA0701 x1 )

E

NGLISH

-9

Before use

Cautions when moving the projector

Be sure to attach the lens cover before moving the projector.

The projection lens is extremely susceptible to vibration and shocks. When moving the projector, use the accessory carrying bag. When placing the projector inside the carrying bag, position it so that the lens is facing upward.

Cautions regarding setting-up

Avoid setting up in places which are subject to vibration or shocks.

The internal parts can be damaged, which may cause malfunctions or accidents.

Do not set up the projector near high-voltage power lines or near motors.

The projector may be subject to electromagnetic interference.

If installing the projector to the ceiling, ask a qualified technician to carry out all installation work.

You will need to purchase the separate installation kit (Model

No.ET-PK735). Furthermore, all installation work should only be carried out by a qualified technician.

If using this projector at high elevations (above 1400 m), set the FAN CONTROL to “HIGH”. (Refer to page 46.)

Failure to observe this may result in malfunctions.

10-E

NGLISH

Notes on use

In order to get the best picture quality

Draw curtains or blinds over any windows and turn off any fluorescent lights near the screen to prevent outside light or light from indoor lamps from shining onto the screen.

Do not touch the surfaces of the lens with your bare hands.

If the surface of the lens becomes dirty from fingerprints or anything else, this will be magnified and projected onto the screen. Moreover, when not using the projector, retract the lens and then cover it with the accessory lens cover.

About the screen

Do not apply any volatile substances which may cause discolouration to the screen, and do not let it become dirty or damaged.

About the wireless card and SD memory card

(PT-L735NTE only)

Static electricity from the human body can damage the wireless card or SD memory card. To prevent this, you should touch a nearby metallic object such as an aluminium sash or a door knob to dissipate the static charge from your body.

About the wireless card slot and SD memory card slot

(PT-L735NTE only)

Make sure that there are no foreign objects inside the slot when inserting the wireless card or SD memory card. Failure to observe it may damage the card and the slot.

About the lamp

The lamp may need to be replaced earlier due to variables such as individual lamp characteristics, usage conditions and the installation environment, especially when the projector is subjected to continuous use for more than 10 hours or the power is frequently turned on and off.

E

NGLISH

-11

Location and function of each part

Projector

<Top, right and front>

PT-L735NTE only

1 2

#$

%

3 4

& '

(

0

*

-

,

/ . -, + * )

# Focus ring

(page 24)

$ Zoom ring

(page 24)

% Projector control panel

(page 14)

& Connector panel

(page 16)

' MAIN POWER switch

(pages 23 and 25)

( Power input socket (AC IN)

(page 23)

The accessory mains lead is connected here.

Do not use any mains lead other than the accessory mains lead.

) Speaker (L)

* Air inlet ports

Do not cover these ports.

+ Air filter

(page 54)

, Front adjustable legs(L/R)

(page 24)

- Leg adjuster buttons(L/R)

(page 24)

These buttons are used to unlock the front adjustable legs. Press to adjust the angle of tilt of the projector.

. Remote control signal receptor

(page 22)

/ Lens cover

0 Projection lens

1 Wireless card slot

(PT-L735NTE only)

Insert the wireless card into here.

(Refer to page 17.)

2 Eject switch

(PT-L735NTE only)

Use to remove the wireless card from the card slot.

3 Access lamp

(PT-L735NTE only)

Flashes while the projector is being accessed for reading or writing the data in the SD memory card.

4 SD memory card slot

(PT-L735NTE only)

Insert the SD memory card into here.

12-E

NGLISH

Projector

<Back and bottom>

$ % &

#

'

(

# Security lock

This can be used to connect a commercially-available theftprevention cable (manufactured by Kensington). This security lock is compatible with the Microsaver

Security System from

Kensington. Contact details for this company are given below.

Kensington Technology Group

ACCO Brands Inc.

2855 Campus Drive

San Mateo, CA 94403 USA

Tel (650)572-2700

Fax (650)572-9675 http://www.kensington.com/ http://www.gravis.com/

NOTE:

B Information given above may be changed in future.

$ Remote control signal receptor

(page 22)

% Air outlet port

Do not cover this port.

& Carrying handle

' Speaker (R)

( Lamp unit holder

(page 56)

WARNING

Do not bring your hands or other objects close to the air outlet port.

B Heated air comes out of the air outlet port. Do not bring your hands or face, or objects which cannot withstand heat close to this port, otherwise burns or damage could result.

NOTE:

B During projection of an image, the cooling fan will operate, emitting a small noise as it operates. Turning the lamp on or off will cause this noise to increase a little.

B By using the OPTION menu to set

LAMP POWER to “LOW”, the operating sound of the fan can be reduced. (Refer to page 46.)

E

NGLISH

-13

Remote control unit

'

(

1

,

-

4

5

6

7

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

2

)

3

+

Projector control panel

#

$

%

. / 0

& ' ( )

R-CLICK ENTER

FREEZE SHUTTER

FUNC1 STD

Computer Projector

*

8

9

* + , -

# RGB INPUT indicator

(page 26)

This indicator shows whether a signal is being input to the RGB input connectors (RGB 1 IN/RGB

2 IN). When an input signal is detected, the indicator illuminates.

$ LAMP indicator

(page 53)

This indicator illuminates when it is time to replace the lamp unit. It flashes if a circuit abnormality is detected.

% TEMP indicator

(page 52)

This indicator illuminates if an abnormally high or low temperature is detected inside the projector or around it. If the temperature reaches a certain level, the power supply will be turned off automatically and the indicator will flash.

& Power indicator

(page 23, 25 and 26)

This indicator illuminates red when

14-E

NGLISH

the MAIN POWER switch is turned on (standby mode), and illuminates green when the power is turned on and a picture starts to be projected.

When the WEB STANDBY is set to

“ON”, the cooling fan operates and the power indicator on the projector flashes slowly in red.

' POWER button

(pages 23 and 25)

( Input select (VIDEO, RGB)

buttons

(page 24)

These buttons are used to select the input signals. When AUTO

SEARCH in the OPTION menu is set to “ON”, the input signal will be detected and selected automatically by pressing this button for a few seconds. (Refer to page 45.)

) AUTO SETUP button

(pages 24 and 27)

If this button is pressed while a picture is being projected, the projection settings will be adjusted automatically in accordance with the signal being input. In addition, the angle of tilt of the projector will be automatically detected and adjusted in order to correct any keystone distortion.

* SHUTTER button

(page 28)

This button is used to momentarily turn off the picture and sound.

+ MENU button

(pages 32 and 35)

This button is used to display the menu screens. When a menu screen is being displayed, this button can be used to return to a previous screen or to clear the screen.

, Arrow (F I and H

(page 35)

These buttons are used to select and adjust items in the menu screens.

*When in computer operating mode, these buttons on the remote control unit function differently. (page 31)

- ENTER button

(page 35)

This button is used to accept and to activate items selected in the on-screen menus.

*When in computer operating mode, this button on the remote control unit functions differently.

(page 31)

. Laser emitter

(page 30)

/ Infrared emitter

(page 22)

0 Click button

(page 31)

This button can be used when the operating mode select switch is moved to the left (Computer).

1 PAGE button

(page 31)

This button can be used when the operating mode select switch is moved to the left (Computer).

2 Operation indicator

(page 30)

This indicator illuminates while a laser beam is being emitted

(while the LASER button is being pressed). It flashes when any other buttons are being pressed.

3 LASER button

(page 30)

A beam of laser light is emitted while this button is being pressed. This laser beam can be used as a pointer to point to something on the screen.

4 FREEZE button

(page 28)

This button is used to momentarily freeze projection so that a still picture is displayed.

5 D.ZOOM +/- buttons

(page 29)

These buttons are used to enlarge the projected image.

6 VOLUME +/- buttons

(page 29)

These buttons are used to adjust the volume of the sound that is output from the projector’s built-in speaker and AUDIO OUT jack. Refer to page

44 for details on how to adjust the volume using the buttons on the projector control panel.

7 FUNC1 (function) button

(pages 41,44 and 46)

This button can be used for 1) switching on and off the sound volume and 2) entering into the keystone distortion correction mode.

Use the FUNC1 item in the OPTION menu to select which you wish to use.

8 STD (standard) button

(page 36)

This button is used to reset the projector adjustment values to the factory default settings.

9 Operating mode (Computer,

Projector) select switch

(page 31)

Move this switch to the left side to use the remote control unit to operate a computer, and move it to the right side to operate the projector.

E

NGLISH

-15

Connector panel

*

+

# $ % & '

( )

# USB port

(page 31)

The remote control unit can be used as a personal computer mouse by connecting the projector to a personal computer with the supplied USB cable.

(4-pin square connector)

$ SERIAL connector

(pages 20, 21 and 64)

This connector is used to connect a personal computer to the projector in order to externally control the projector. (RS-232C compatible)

% RGB1 IN connector

(pages 20 and 21)

This connector is used to input

RGB signals and YP

B

P

R signals.

& RGB2 IN/RGB1 OUT connector

(pages 20, 21 and 45)

This connector is used to input or output RGB signals and YP

B

P

R signals. Use the RGB2 SELECT item in the OPTION menu to select whether you want input or output with this connector.

' AUDIO OUT jack

(pages 20 and 21)

This jack is used to output the audio signals which are input to the projector. If audio equipment

16-E

NGLISH

is connected to this jack, no sound will be output from the built-in speaker.

( RGB AUDIO IN jack

(pages 20 and 21)

Only one system is provided, so connect the appropriate connector when using RGB1 or

RGB2.

) S-VIDEO IN connector

(pages 20 and 43)

This connector is used to input signals from a S-VIDEO-compatible equipment such as a video deck.

* VIDEO IN jack

(page 20)

This jack is used to input video signals from a video equipment such as a video deck.

+ AUDIO IN L-R (for VIDEO/S-

VIDEO) jacks

(page 20)

Only one system is provided, so connect the appropriate connector when using VIDEO or

S-VIDEO.

(PT-L735NTE only)

Wireless card

#

$

SD memory card

Front Back

&

'

%

# Connector

This connector is for connecting the wireless card to the projector’s card slot. Be careful not to touch the connector.

$ Wireless card power indicator

Illuminates when the wireless card is operating.

% Wireless card access indicator

Flashes while the projector is being accessed with personal computers by means of a wireless network.

& Metal terminals

These terminals are for connecting the SD memory card to the projector’s card slot. Do not touch the metal terminals with hands or metal objects, attach stickers to them, or allow them to become contaminated in any way.

' Write-protect switch

If the write-protect switch on the

SD memory card is moved to the

LOCK position, it will not be possible to use any file editing functions such as deleting or moving image files.

Inserting the wireless card

(PT-L735NTE only)

Insert the wireless card before using the PT-L735NTE.

Hexagon wrench

(accessory)

Card lock

Card lock fixing screw

%

The card lock is already installed at the factory default setting. When you insert the wireless card, first remove the card lock fixing screw using the hexagon wrench to release the card lock.

$

#

Eject switch

# Insert the wireless card until it locks.

$ Set the accessory card lock.

% Fasten the card lock with the card lock fixing screw using the hexagon wrench.

B When removing the wireless card, remove the card lock, and then press the eject switch.

E

NGLISH

-17

Setting-up

Projection methods

In way of installing projector, any one of the following four projection methods are used. Select whichever projection method matches the setting-up method. (The projection method can be set from the OPTION menu. Refer to page 46 for details.)

BFront-desk projection BFront-ceiling projection

Menu items

FRONT/REAR

DESK/CEILING

Setting

FRONT

DESK

BRear-desk projection

(Using a translucent screen)

Menu items

FRONT/REAR

DESK/CEILING

Setting

FRONT

CEILING

BRear-ceiling projection

(Using a translucent screen)

Menu items

FRONT/REAR

DESK/CEILING

Setting

REAR

DESK

Menu items

FRONT/REAR

DESK/CEILING

Setting

REAR

CEILING

NOTE:

B You will need to purchase the separate ceiling bracket (ET-PK735) when using the ceiling installation method.

B If you set up the projector vertically, it may cause to damage the projector.

B It is recommended that you set up the projector in a place that is tilted at less than ±30°. Setting up the projector in places that are tilted at more than ±30° may cause malfunctions.

18-E

NGLISH

Projector position

Top edge of screen

Screen

L

Bottom edge of screen

<Units: mm (inch)>

L: Projection distance

SH: Image height

SW: Image width

H1: Distance from centre of lens to bottom edge of projected image

L

16 (-5/8)

Screen

Projection distances

Screen size (4:3)

Diagonal length

Height

(SH)

Width

(SW)

Projection distance (L)

Wide

(LW)

Telephoto

(LT)

Height position

(H1)

1.01 m(40˝) 0.61 m(2´) 0.81 m(2´8˝)

1.27 m(50˝) 0.76 m(2´6˝) 1.02 m(3´4˝)

1.52 m(60˝) 0.91 m(3´) 1.22 m(4´)

1.77 m(70˝) 1.07 m(3´6˝) 1.42 m(4´8˝)

2.03 m(80˝) 1.22 m(4´) 1.63 m(5´4˝)

2.28 m(90˝) 1.37 m(4´6˝) 1.83 m(6´)

2.54 m(100˝) 1.52 m(5´) 2.03 m(6´8˝)

3.81 m(150˝) 2.29 m(7´6˝) 3.05 m(10´)

1.2 m(3´11˝) 1.5 m(4´11˝) 0.06 m(2-13/32˝)

1.6 m(5´2˝)

1.9 m(6´2˝)

2.2 m(7´2˝)

2.5 m(8´2˝)

2.8 m(9´2˝)

1.9 m(6´2˝)

2.3 m(7´6˝)

0.08 m(3˝)

0.09 m(3-19/32˝)

2.7 m(8´10˝) 0.11 m(4- 6/32˝)

3.1 m(10´2˝) 0.12 m(4-26/32˝)

3.5 m(11´5˝) 0.14 m(5-13/32˝)

3.1 m(10´2˝) 3.9 m(12´9˝) 0.15 m(6˝)

4.7 m(15´5˝) 5.8 m(19´) 0.23 m(9˝)

5.08 m(200˝) 3.05 m(10´) 4.06 m(13´4˝) 6.2 m(20´4˝) 7.8 m(25´7˝) 0.31 m(12˝)

6.35 m(250˝) 3.81 m(12´6˝) 5.08 m(16´8˝) 7.8 m(25´7˝) 9.8 m(32´1˝) 0.38 m(15˝)

7.62 m(300˝) 4.57 m(15´) 6.10 m(20´) 9.4 m(30´10˝) 11.8 m(38´8˝) 0.46 m(18˝)

NOTE:

B The dimensions in the table above are approximate.

B If you use the projection distance for the 16:9 screen, the 4:3 projection image overflows the screen at the top and bottom.

B For details about projected image distances, refer to page 63.

E

NGLISH

-19

Connections

Notes on connections

B Read the instruction manual for each system component carefully before connecting it.

B Turn off the power supply for all components before making any connections.

B If the cables necessary for connecting a component to the system are not included with the component or available as an option, you may need to fashion a cable to suit the component concerned.

B If there is a lot of jitter in the video signal which is input from the video source, the picture on the screen may flicker. In such cases, it will be necessary to connect a TBC (time base corrector).

B Refer to the list on page 62 for details on compatible signals which can be input to the projector.

B Only one audio system circuit is available for each of the AUDIO IN L-R jacks for

S-VIDEO/VIDEO signals and the RGB AUDIO IN jack, so if you wish to change the audio input source, you will need to remove and insert the appropriate plugs.

Example of connecting to video equipments

Computer for control use

D-sub 15 (male) - BNC5 (male) adapter cable

Red (connect to P

R signal connector)

Blue (connect to P

B signal connector)

Green (connect to Y signal connector)

DVD player

D-sub 9-pin

(male)

Example of connecting to computer

Computer

Monitor

ON DIP

Computer for control use

Audio system

DVD player Video deck

NOTE:

B If the video signal source is connected using a cable with a BNC connector plug, use a

BNC/RCA adapter (sold separately) to convert the cable end to an RCA plug-type jack.

B If the signal cables are disconnected or if the power supply for the computer or video deck is turned off while the digital zoom function is being used, this function will be cancelled.

20E

NGLISH

D-sub 9-pin

(male)

Audio system

NOTE:

B It is better to shut down the computer before turning off the MAIN

POWER switch of the projector.

B Do not input the signal to the RGB2 IN/RGB1 OUT connector when the

RGB2 SELECT item in the OPTION menu is set to “OUTPUT”. (Refer to page 45.)

Refer to the accessory CD-ROM for details on the wireless network that is used for controlling the projector with a personal computer by means of the wireless card. (PT-L735NTE only)

E

NGLISH

-21

Preparation for the remote control unit

# Open the cover.

$ Insert the batteries so that the

polarities are correct, and then close the cover.

AAA batteries

(two)

NOTE:

B Do not drop the remote control unit.

B Keep the remote control unit away from liquids.

B Remove the batteries if not using the remote control unit for long periods.

B Do not use rechargeable batteries.

Operating range

If the remote control unit is held so that it is facing directly in front of the remote control signal receptors on the front or rear of the projector, the operating range is within approximately 7 m (23´) from the surfaces of the receptors. Furthermore, the remote control unit can be operated from an angle of ±30° to the left or right and ±15° above or below the receptors.

NOTE:

B If there are any obstacles in between the remote control unit and the receptors, the remote control unit may not operate correctly.

B If strong light is allowed to shine onto the remote control signal receptor, correct projector operation may not be possible. Place the projector as far away from light sources as possible.

B If facing the remote control unit toward the screen to operate the projector, the operating range of the remote control unit will be limited by the amount of light reflection loss caused by the characteristics of the screen used.

22-E

NGLISH

Turning on the power

Before turning on the power

1, Ensure that all components are connected properly.

2, Connect the accessory mains lead.

3, Remove the lens cover.

$

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

(

&

#

Mains lead

Power indicator

'

Lens cover

*

)

'

R-CLICK

ENTER

#

Press the MAIN POWER switch to turn on the power.

BThe power indicator on the projector will illuminate red.

$

Press the POWER button.

BThe power indicator on the projector will flash green. After a short period, the indicator will illuminate green, and a picture will be projected.

%

Turn on the power of all connected devices.

BStart the play function of a device such as a DVD player.

NOTE:

B A tinkling sound may be heard while the power indicator is turned off, but this is not a sign of a malfunction.

E

NGLISH

-23

&

Press the input select button to select the input signal.

Input select buttons

VIDEO RGB PT-L735NTE only

RGB

Changing signals

VIDEO RGB1 RGB1 RGB2

S-VIDEO

RGB2

SDCARD NETWORK

BA picture will be projected in accordance with the selected input signal.

Follow the procedure below when you set the projector up first, and when you change the setup place.

'

Adjusting the angle

BWhile pressing the adjuster buttons, adjust the forward/back angle of tilt of the projector. Adjust so that the projector is as vertical to the screen as possible.

(

Press the AUTO SETUP button to initiate automatic positioning.

BThe tilt of the projector and the input signal will be detected and keystone distortion and the position of the image will be corrected.

(Refer to page 27 for details.)

AUTO SETUP

)

Adjusting the size

BTurn the zoom ring to adjust the size of the projected image.

*

Adjusting the focus

BTurn the focus ring to adjust the focus of the projected image.

24-E

NGLISH

Turning off the power

%

#

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

Power indicator

RGB input indicator

$

R-CLICK

ENTER

#

Press the POWER button.

B“Power OFF” is displayed on the screen.

OK

Power OFF

CANCEL

$

then press the ENTER button.

BThe lamp unit will switch off and the picture will stop being projected.

(The power indicator on the projector will illuminate orange.)

%

Press the MAIN POWER switch to turn off the power after the power indicator on the projector illuminates red.

Direct power off function

You can turn off the MAIN POWER switch and move the projector immediately after use.

The cooling fan will operate by the internal power supply to cool down the lamp.

B When this function is used, it may take more time for the lamp to turn back on again compared to when the lamp cools down while the MAIN POWER switch is ON.

B Do not put the projector in a bag while the cooling fan is operating.

E

NGLISH

-25

NOTE:

B You can also turn off the power by pressing the POWER button twice or by holding down it for at least 0.5 seconds.

B When the projector is in standby mode (the power indicator on the projector is illuminated red), the projector will still draw a maximum 7 W of power, even when the cooling fan has stopped.

(PT-L735NTE only)

B When the WEB STANDBY is set to “ON”, the cooling fan operates and the power indicator on the projector flashes slowly in red and the projector draw a maximum 30 W of power. (page 48)

B Do not turn off the power while the SD card is being accessed and “SD

CARD IN USE.” is displayed on the screen.

Power indicator

Power indicator status

Red

Green

Orange

Illuminated

Flashing slowly

Flashing

Illuminated

Illuminated

Flashing

Projector status

The projector is in standby mode and image projection is possible by pressing the POWER button.

WEB STANDBY in the NETWORK menu is set to

“ON”. The projector can be controlled with personal computers by means of a wireless network.

(The cooling fan is operating.) : PT-L735NTE only.

The projector is preparing for projection after the power is turned on while the power indicator is illuminated red. (After a short period, a picture will be projected.)

A picture is being projected.

The lamp is cooling down after the power is turned off. (The cooling fan is operating.)

The projector is preparing for projection after the power is turned on while the power indicator is illuminated orange. (After a short period, a picture will be projected.)

RGB INPUT indicator

RGB INPUT indicator status

Illuminated during standby mode

Illuminated during projection

Projector status

A signal is being input to either the RGB1 IN or

RGB2 IN connector.

A signal is being input to the connector selected using the input select buttons.

26-E

NGLISH

Correcting keystone distortion and automatic positioning (AUTO SETUP)

This projector detects its degree of tilt and the input signal. Keystone distortion and the position of the image can then be corrected automatically in accordance with the input signal.

Press the AUTO SETUP button.

(When the projected image has caused keystone distortion)

RGB LASER

VIDEO MENU

PAGE

Screen

Projected image

B Automatic positioning will be carried out.

[

Projector control panel

If you press the AUTO SETUP button, the items given in the table below will be set automatically in addition to keystone distortion being corrected. The setting details change according to the signal which is being input.

Input signal

RGB signals

Contents set up automatically

POSITION, DOT CLOCK, CLOCK PHASE

(If the dot clock frequency is 100 MHz or higher, the DOT

CLOCK and CLOCK PHASE will not be set automatically.)

Page

40,

41

NOTE:

B If the edges of the projected picture are indistinct, or if a dark picture is being projected, the automatic setup processing may stop automatically before it is complete. If this happens, project a different picture and then press the AUTO

SETUP button once more, or make the above adjustments manually.

B Set AUTO KEYSTONE in the OPTION menu to “OFF” to prevent any deterioration of the picture as a result of keystone correction. (Refer to page 45.)

B Keystone distortion may not be corrected enough depending on the adjustment of the zoom ring. In this case, adjust the KEYSTONE option. (Refer to page 41.)

E

NGLISH

-27

Turning off the picture and sound momentarily (SHUTTER)

The shutter function can be used to momentarily turn off the picture and sound from the projector when the projector is not being used for short periods of time, such as during breaks in meetings or when carrying out preparation. The projector uses less power in shutter mode than it does in normal projection mode.

R-CLICK

ENTER

Press the SHUTTER button.

B The picture and sound will be turned off.

B Press any button on either the projector or remote control unit to return to normal operating mode.

FUNC1 STD

Computer

Projector

Pausing a picture (FREEZE)

Press the FREEZE button.

R-CLICK

ENTER

Still picture

FUNC1 STD

Computer Projector

28-E

NGLISH

B The picture being projected will be paused.

B Press the FREEZE button again to cancel the still picture.

Enlarging the picture (D.ZOOM)

Press a D.ZOOM +/- button.

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

B The picture will then be enlarged to 1.5

times the normal size.

[

R-CLICK ENTER

FREEZE SHUTTER

FUNC1 STD

The remote control unit functions during D.ZOOM (digital zoom)

Use the F,G,IandHbuttons to move the enlarged area which you want to project.

Use the D.ZOOM +/- buttons to change the enlargement ratio.

Press the MENU button to return to the normal screen.

NOTE:

B The enlargement ratio can be changed within the range of x1 to x4, by 30 steps.

B If the type of signal being input changes while the digital zoom function is being used, the digital zoom function will be cancelled.

Adjusting the volume (VOLUME)

FREEZE SHUTTER

Press the VOLUME +/- button.

B Press the + button to raise the volume.

B Press the - button to lower the volume.

FUNC1 STD

NOTE:

B You can also select “VOLUME” from the

AUDIO menu to adjust the volume.

Computer

Projector

E

NGLISH

-29

Useful functions of the remote control unit

Laser beam pointer

The laser beam emitted from the remote control can be used as a pointer by pointing forward to the screen.

While the LASER button is being pressed, the laser beam is being emitted and the operating indicator illuminates.

Do not look into the laser emitter of the remote control unit or point the laser beam towards other people, otherwise damage to eyes may occur.

Laser Transmitter window

Warning

B DO NOT STARE INTO THE LASER

BEAM OR AIM IT AT ANY PERSON'S

EYE. LASER RADIATION CAN CAUSE

SERIOUS INJURY TO THE HUMAN EYE.

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

R-CLICK

ENTER

FREEZE SHUTTER

FUNC1 STD

Computer Projector

PUSH

Caution

B Use of controls or adjustments or performance of procedures

other than those specified herein may result in hazardous radiation exposure.

B This remote control unit cannot be repaired.

30-E

NGLISH

Wireless mouse

You can use the remote control as a personal computer mouse. Set the Mode

(Projector/Computer) switch on the remote control unit to “Computer” and connect the projector’s USB port to a personal computer counterpart with the accessory USB cable.

Projector

Accessory USB cable

Computer equipped with a USB port

BFor Windows (Versions 98SE, Me, 2000 and XP), you can use the standard mouse driver which comes bundled with the operating system.

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

R-CLICK

ENTER

FREEZE SHUTTER

FUNC1 STD

Computer Projector

Page buttons

FGIH button

R-CLICK button

Mode switch

(Computer/Projector)

Click button

Mode switch (Computer/Projector)

Move the mode switch to the

“Computer” position.

B Page buttons

^: Functions as the Page Up button on a personal computer keyboard.

v: Functions as the Page Down button on a personal computer keyboard.

B Arrow (F IH

These buttons can move the cursor on a personal computer’s screen as the personal computer mouse.

B R-CLICK button

This button functions as the right button on a personal computer mouse.

B Click button

This button functions as the left button on a personal computer mouse.

NOTE:

B The optional wireless mouse receiver (ET-RMRC2) is needed when the projector and personal computers are placed where they cannot be connected with the accessory USB cable.

E

NGLISH

-31

On-screen menus

Menu screens

The various settings and adjustments for this projector can be carried out by selecting the operations from on-screen menus.

The general arrangement of these menus is shown below.

PICTURE menu (page 37)

When an RGB signal is being input

When a YP

B

P

R signal is being input

PICTURE

PICTURE MODE

CONTRAST

BRIGHT

SHARPNESS

COLOR TEMP.

WHITE BALANCE R

WHITE BALANCE G

WHITE BALANCE B

STANDARD

STANDARD

32

32

6

STANDARD

32

32

32

PICTURE

PICTURE MODE

CONTRAST

BRIGHT

COLOR

TINT

SHARPNESS

COLOR TEMP.

NR

STANDARD

32

32

32

32

6

STANDARD

0

STANDARD

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

When an S-VIDEO/VIDEO signal is being input

PICTURE

PICTURE MODE

CONTRAST

BRIGHT

COLOR

TINT

SHARPNESS

COLOR TEMP.

NR

TV-SYSTEM

STANDARD

SELECT:[^][@]

ADJUST:[{][}]

32

32

32

32

6

STANDARD

0

STANDARD

AUTO1

ENTER:[ENTER]

ESC:[MENU]

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

When the NETWORK/SD CARD is selected. (PT-L735NTE only)

PICTURE

PICTURE MODE

CONTRAST

BRIGHT

SHARPNESS

COLOR TEMP.

STANDARD

32

32

6

STANDARD

STANDARD

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

NOTE:

B The onscreen displays in these operating instructions are for the

PT-L735NTE.

B Keystone distortion of the on-screen display will not be corrected.

32-E

NGLISH

POSITION menu (page 40)

When an RGB signal is being input

POSITION

POSITION

DOT CLOCK

CLOCK PHASE

KEYSTONE

OSD POSITION

RESIZING

AUTO SETUP

FRAME LOCK

STANDARD

H: 128 V: 32

32

16

H: 0 V: 0

TOP LEFT

OFF ON

OFF ON

When a YP

B

P

R signal is being input

POSITION

POSITION

KEYSTONE

OSD POSITION

ASPECT

RESIZING

AUTO SETUP

STANDARD

H: 64 V: 16

H: 0 V: 0

TOP LEFT

4:3

OFF ON

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

When an S-VIDEO/VIDEO signal is being input

POSITION

POSITION

KEYSTONE

OSD POSITION

ASPECT

RESIZING

AUTO SETUP

STANDARD

H: 32 V: 16

H: 0 V: 0

TOP LEFT

AUTO

OFF ON

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

When the NETWORK/SD CARD is selected (PT-L735NTE only)

POSITION

KEYSTONE

OSD POSITION

AUTO SETUP

STANDARD

H: 0 V: 0

TOP LEFT

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

AUDIO menu (page 44)

AUDIO

VOLUME

MUTE

AUDIO MODE

20

OFF ON

VOICE NORMAL

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

LANGUAGE menu (page 44)

LANGUAGE

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

SELECT:[^][@] [{][}]

SELECT :[{][}]

ESC:[MENU]

ENTER:[ENTER]

E

NGLISH

-33

OPTION menu (page 45)

OPTION

OSD

AUTO SEARCH

AUTO SIGNAL

AUTO KEYSTONE

RGB2 SELECT

RGB/YP

B

P

R

VGA60/525P

BLACKBORD

BACK COLOR

NEXT PAGE @

OFF

OFF

OFF

OFF

INPUT

RGB

VGA60

OFF

BLUE

ON

ON

ON

ON

OUTPUT

YP

B

P

R

525P

ON

BLACK

SELECT:[^][@]

ADJUST:[{][}] ESC:[MENU]

The RGB/YP

B

P

R item is displayed when an RGB/YP

B

P

R signal is being input.

NETWORK menu (page 48)

(PT-L735NTE only)

NETWORK

NETWORK

EASY CONNECT

HOSTNAME

WEB CONTROL

WEB STANDBY

WEB PASSWORD

SD MODE

LAN1

OFF

PANASONIC L735NT

OFF ON

OFF

ON

ON

VIEWER WEB

OPTION

PREVIOUS PAGE ^

FRONT/REAR

DESK/CEILING

FAN CONTROL

LAMP POWER

LAMP RUN TIME

FUNC1

CONTROL KEY

AUTO POWER OFF

FRONT

DESK

STANDARD

LOW

REAR

CEILING

HIGH

HIGH

10 H

MUTE

OFF

KEYSTONE

DISABLE

ON

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

SD CARD menu (page 48)

(PT-L735NTE only)

SD CARD

AUTOPLAY

REPEAT

INTERVAL

OFF ON

1

5 sec

SELECT:[^][@]

調整:[←][→]

ENTER:[ENTER]

ESC:[MENU]

SECURITY menu (page 49)

SECURITY

PASSWORD SETTING

CHANGE PASSWORD

TEXT DISPLAY

CHANGE TEXT

LOGO DISPLAY

LOGO CLEAR

LOGO CAPTURE

INVALID

OFF

OFF

VALID

ON

ON

SELECT:[^][@] [{][}]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

34-E

NGLISH

Menu operation guide

# Press the MENU button.

The menu screen will be displayed.

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

PICTURE

PICTURE MODE

CONTRAST

BRIGHT

SHARPNESS

COLOR TEMP.

WHITE BALANCE R

WHITE BALANCE G

WHITE BALANCE B

STANDARD

STANDARD

32

32

6

32

32

32

STANDARD

R-CLICK ENTER

FREEZE SHUTTER

FUNC1

STD

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

The selected menu screen will then be displayed.

(Example: POSITION menu)

POSITION

POSITION

DOT CLOCK

CLOCK PHASE

KEYSTONE

OSD POSITION

RESIZING

AUTO SETUP

FRAME LOCK

STANDARD

H: 128 V: 32

32

16

H: 0 V: 0

TOP LEFT

OFF ON

OFF ON

Projector control panel

SELECT:[^][@]

ADJUST:[{][}] ESC:[MENU]

You can select an item here. The selected item is shown in yellow.

POSITION

POSITION

DOT CLOCK

CLOCK PHASE

KEYSTONE

OSD POSITION

RESIZING

AUTO SETUP

FRAME LOCK

STANDARD

H: 128 V: 32

32

16

H: 0 V: 0

TOP LEFT

OFF ON

OFF ON

NOTE:

B Press the MENU button to return to the previous screen.

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

E

NGLISH

-35

POSITION

POSITION

DOT CLOCK

CLOCK PHASE

KEYSTONE

OSD POSITION

RESIZING

AUTO SETUP

FRAME LOCK

STANDARD

H: 128 V: 32

32

16

H: 0 V: 0

TOP LEFT

OFF ON

OFF ON

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

A

B

A For the value adjusting items

Press the ENTER button to display an individual adjustment screen.

C

POSITION

H:

V:

128

32

Returning a setting to the factory default

If you press the STD (standard) button on the remote control unit, you can return settings to the factory default settings. However, the operation of this function varies depending on which screen is being displayed.

B When a menu screen is being

displayed

POSITION

POSITION

DOT CLOCK

CLOCK PHASE

KEYSTONE

OSD POSITION

RESIZING

AUTO SETUP

FRAME LOCK

STANDARD

H: 128 V: 32

32

16

H: 0 V: 0

TOP LEFT

OFF ON

OFF ON

DOT CLOCK 32

Press the I or H buttons to adjust the setting.

You can also adjust the bar-scale items pressing the I or H buttons in the menu screen.

Some items can be adjusted by pressing the F or G buttons.

B For the selective items

RESIZING OFF ON

Select the setting by pressing the

I or H buttons.

C For the fixed items

Press the ENTER button, and the function will work.

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

All items displayed will be returned to their factory default settings.

NOTE:

B You can also select

STANDARD from the menu screen and then press the

ENTER button.

B When an individual adjustment

screen is being displayed

DOT CLOCK

32

Only the item displayed will be returned to the factory default setting.

36-E

NGLISH

Adjusting the picture

When an S-VIDEO/VIDEO signal is being input

Select the item pressing the F or G buttons on the remote control unit or the projector.

Press the I or H buttons to set the selective items. For the value adjusting items, press the ENTER button to display an individual screen, and press the I or H buttons to adjust the setting.

PICTURE

PICTURE MODE

CONTRAST

BRIGHT

COLOR

TINT

SHARPNESS

COLOR TEMP.

NR

TV-SYSTEM

STANDARD

32

32

32

32

6

STANDARD

0

STANDARD

AUTO1

When an RGB signal is being input

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

When the NETWORK/SD CARD is selected

PICTURE

PICTURE MODE

CONTRAST

BRIGHT

SHARPNESS

COLOR TEMP.

WHITE BALANCE R

WHITE BALANCE G

WHITE BALANCE B

STANDARD

STANDARD

32

32

6

32

32

32

STANDARD

PICTURE

PICTURE MODE

CONTRAST

BRIGHT

SHARPNESS

COLOR TEMP.

STANDARD

32

32

6

STANDARD

STANDARD

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

When a YP

B

P

R signal is being input

PICTURE

PICTURE MODE

CONTRAST

BRIGHT

COLOR

TINT

SHARPNESS

COLOR TEMP.

NR

STANDARD

32

32

32

32

6

STANDARD

0

STANDARD

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

PICTURE MODE

NATURAL

STANDARD

DYNAMIC

BLACKBOARD

Select the picture mode that best matches the image source and room conditions.

The mode best used in dark rooms is

NATURAL. For rooms having regular lighting conditions in use, select STANDARD. For exceptionally bright rooms, use DYNAMIC.

BLACKBOARD is available only when

BLACKBOARD in the OPTION menu is set to "ON". Select BLACKBOARD when projecting onto blackboards.

E

NGLISH

-37

CONTRAST

This adjusts the contrast of the picture. Press the H button to make the picture brighter, and press the

I button to make the picture darker. (Adjust the BRIGHT setting first if required before adjusting the

CONTRAST setting.)

BRIGHT

This adjusts the darker areas (black areas) in the picture. Press the H button if dark areas are too solid (for example, if hair is difficult to see), and press the I button if black areas are too light (grey rather than black).

COLOR

(S-VIDEO/VIDEO/YP

B

P

R only)

Press the H button to make the colour more vivid in tone, and press the I button to make the colour more pastel in tone.

TINT

(NTSC/NTSC 4.43/YP

B

P

R only)

This adjusts the flesh tones in the picture. Press the H button to make flesh tones more greenish, and press the I button to make the flesh tones more reddish.

SHARPNESS

Press the H button to make the picture details sharper, and press the I button to make the picture details softer.

Colour Hue Setting

(COLOR TEMP.)

STANDARD

HIGH

LOW

This is used to adjust the white areas of the picture if they appear bluish or reddish.

38-E

NGLISH

Noise Reduction (NR)

(When S-VIDEO/VIDEO/YP

B

P

R signals are being input)

If the signal is of such poor quality that picture interference appears, you can suppress this interference by adjusting the NR (Noise Reduction).

To strengthen the effect, press the H button. To turn it off , set to “0” by pressing the I button.

WHITE BALANCE R/G/B

(RGB only)

This is used to adjust the white areas of the picture if they appear colourised. Press the I button to make the selected colour lighter.

Press the H button to make the selected colour stronger.

TV-SYSTEM

(S-VIDEO/VIDEO only)

AUTO1

AUTO2

NTSC

NTSC4.43

PAL

PAL-M

PAL-N

SECAM

AUTO1

The projector automatically distinguishes between NTSC/NTSC

4.43/PAL/PAL60/SECAM signals.

AUTO2

The projector automatically distinguishes between NTSC/PAL-

M/PAL-N signals.

NOTE:

B This should normally be set to

“AUTO1” or “AUTO2”. If the signal is of such poor quality that the correct format cannot be automatically distinguished, change the setting manually to the required TV system.

Projecting sRGBcompatible pictures

sRGB is an international colour reproduction standard (IEC61966-2-

1) established by the International

Electrotechnical Commission (IEC).

If you would like the colours in sRGB-compatible pictures to be reproduced more faithfully, make the following settings.

# Press the F or G

select “PICTURE MODE”, and

then use the I

or H

select “NATURAL”.

$ Press the F

or G

select “COLOR TEMP.”, and

then use the I

H

select “STANDARD”.

button on the remote control unit.

in the OPTION menu by and set to “HIGH” by pressing

NOTE:

B sRGB is only enabled when

RGB signals are being input .

E

NGLISH

-39

Adjusting the position

When the input signal is RGB, first press the AUTO SETUP button to initiate automatic positioning.

If the optimum setting is not obtained when AUTO SETUP is carried out, adjust by the following procedure.

Select the item pressing the F or G buttons on the remote control unit or the projector.

Press the I or H buttons, to adjust the alternative items. For the numerically adjustable items, press the ENTER button to display an individual screen, and press the I or H buttons to adjust the setting.

Some items can be adjusted pressing the F or G buttons.

When an RGB signal is being input

When an S-VIDEO/VIDEO signal is being input

POSITION

POSITION

KEYSTONE

OSD POSITION

ASPECT

RESIZING

AUTO SETUP

STANDARD

SELECT:[^][@]

ADJUST:[{][}]

When the NETWORK/SD CARD is selected

POSITION

KEYSTONE

OSD POSITION

AUTO SETUP

STANDARD

H: 32 V: 16

H: 0 V: 0

TOP LEFT

AUTO

OFF ON

ENTER:[ENTER]

ESC:[MENU]

H: 0 V: 0

TOP LEFT

POSITION

POSITION

DOT CLOCK

CLOCK PHASE

KEYSTONE

OSD POSITION

RESIZING

AUTO SETUP

FRAME LOCK

STANDARD

H: 128 V: 32

32

16

H: 0 V: 0

TOP LEFT

OFF ON

OFF ON

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

When a YP

B

P

R signal is being input.

POSITION

POSITION

KEYSTONE

OSD POSITION

ASPECT

RESIZING

AUTO SETUP

STANDARD

H: 64 V: 16

H: 0 V: 0

TOP LEFT

4:3

OFF ON

SELECT:[^][@]

ADJUST:[{][}]

40-E

NGLISH

ENTER:[ENTER]

ESC:[MENU]

POSITION

Moves the picture position.

Press the I or H buttons to move the picture horizontally.

Press the F or G buttons to move the picture vertically.

POSITION

H:

V:

128

32

DOT CLOCK

(RGB only)

Periodic striped pattern interference

(noise) may occur when a striped pattern such as the one below is projected. If this happens, use the

I and H buttons to adjust so that any such noise is minimised.

Picture condition

Operation

button.

button.

CLOCK PHASE

(RGB only)

Adjust the DOT CLOCK setting first before carrying out this adjustment.

Use the I and H buttons to adjust so that the noise level is least noticeable.

NOTE:

B If signals with a dot clock frequency of 100 MHz or higher are being input, interference may not be completely eliminated when the DOT CLOCK and CLOCK

PHASE adjustments are carried out.

KEYSTONE

Before carrying out keystone correction, 1) adjust the forward/back angle of tilt of the projector by pressing the adjuster buttons and 2) press the

AUTO SETUP buttons to correct vertical keystone distortion. (page 27)

The vertical keystone distortion will be automatically corrected by the projectors automatic setup function.

However the horizontal distortion needs to be corrected or a tilted screen needs to be adjusted manually by following any of the procedures in the table.

KEYSTONE

H:

V:

0

0 button.

button.

NOTE:

B If you press the AUTO SETUP button after correcting the keystone distortion manually, the automatic keystone correction function will operate and the corrected picture will return to its previous incorrect condition. In addition, if you change the input signal and press the AUTO SETUP button, the keystone correction may be cancelled depending on the type of signal and the angle of tilt of the projector. To prevent them from happening, you can set “AUTO

KEYSTONE” in the OPTION menu to

“OFF”

B The greater the correction of keystone distortion amount, the more the picture quality will deteriorate, and the harder it will become to achieve a good level of focus. To obtain the best picture quality, set up the projector and screen in such a way that the amount of keystone correction required is as minimal as

E

NGLISH

-41

possible.

B The picture size will also change when correction of keystone distortion is carried out.

B The range of keystone correction varies depending on the type of signal being input (including when no signal is being input). If you make an adjustment that is outside the allowable range, the setting will not be changed. In addition, if the input signal changes after keystone correction has been carried out, the correction setting may be cancelled.

This indicates that the current correction setting exceeds the allowable range for the new input signal.

B If you correct both vertical and horizontal keystone distortion at the same time, the allowable range of keystone correction becomes smaller. If you make an adjustment that is outside the allowable range, the setting will not be changed.

B The ratio of length and width of an image may become incorrect depending on the amount of the keystone correction.

OSD POSITION

Press the I or H buttons to move the OSD position.

ASPECT

This setting is only valid for an S-

VIDEO/VIDEO signal and a YP

B

P

R signal in 525i (480i), 525p (480p) and 625i format.

AUTO

4:3

16:9

S4:3

AUTO

(S-VIDEO only)

When an S1 video signal is input to the S-VIDEO terminal, the aspect

42-E

NGLISH

ratio is changed automatically to project a 16:9 picture.

4:3

The input signal is projected without change.

16:9

The picture is compressed to a ratio of 16:9 and projected.

[

When a squeezed signal is being input. (The projected image is contracted vertically)

S4:3

The size of the input signal is compressed to 75% and projected.

(This is useful for projecting a picture with a 4:3 aspect ratio onto a 16:9 screen.)

[

When a 4:3 signal is being input

When using the 16:9 screen

S1 video signals

B S1 video signals are a type of video signal with an aspect ratio of 16:9 which include a detector signal. This detector signal is output by some sources such as wide-vision video decks. If the

AUTO setting above is selected, this projector will recognise the detector signal and automatically switch the aspect ratio to 16:9 in order to project the picture.

NOTE:

B This projector is equipped with an aspect ratio selection function.

However, if a mode which does not match the aspect ratio of the input signal is selected, it may affect the quality of viewing of the original picture. Keep this in mind when selecting the aspect ratio.

B If using this projector in places such as cafes or hotels with the aim of displaying programmes for viewing for a commercial purpose or for public presentation, note that if the aspect ratio (16:9) selection function is used to change the aspect ratio of the screen picture, you may be infringing the rights of the original copyright owner for that programme under copyright protection laws.

B If a normal (4:3) picture which was not originally intended for widescreen viewing is projected onto a wide screen, distortion may occur around the edges of the picture so that part of the picture is no longer visible. Such programmes should be viewed in 4:3 mode to give proper consideration to the aims and intentions of the original programme’s creator.

RESIZING

This should normally be set to “ON”.

(This setting is only for signals which have lower resolutions than the LCD panels. Refer to page 62 for details.)

ON

The pixel resolution of the input signal is converted to the same resolution as the LCD panels before being projected. For signals with lower resolutions, gaps in the pixels are automatically interpolated into the picture before it is projected.

This may sometimes cause problems with the quality of the picture.

OFF

The picture signal is projected at its original resolution, with no pixel conversion. The projected picture will be smaller than normal, so adjust the zoom setting or move the projector forwards or backwards to adjust the picture size if necessary.

If set to “OFF”, some features, such as D.ZOOM (digital zoom) or keystone distortion correction will not function.

AUTO SETUP

This item functions in the same way as the AUTO SETUP button on the remote control unit. (page 27)

FRAME LOCK

If the picture’s condition is bad while a RGB moving picture signal is projected, set the FRAME LOCK to

“ON”. Refer to page 62 on compatible RGB signals.

E

NGLISH

-43

Audio adjustment

Select the items by pressing the F or G buttons on the remote control unit or the projector.

AUDIO

VOLUME

MUTE

AUDIO MODE

SELECT:[^][@]

ADJUST:[{][}]

20

OFF ON

VOICE NORMAL

ENTER:[ENTER]

ESC:[MENU]

VOLUME

Press the I or H buttons to adjust the volume of the sound output by the projector’s built-in speaker.

MUTE

Set the MUTE to “ON” pressing the

I or H buttons to turn off the volume of the sound output.

To release muting, set to “OFF” pressing the I or H buttons.

AUDIO MODE

Set to “VOICE” by using the I and

H buttons when the sound output is mainly conversations. The sound will become easier to hear.

Changing the display language

Use the F, G, I and H buttons on the projector or remote control unit to select a language, then press the ENTER button to accept the setting.

LANGUAGE

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

SELECT:[^][@] [{][}]

SELECT :[{][}]

ESC:[MENU]

ENTER:[ENTER]

44-E

NGLISH

Option settings

Use the F and G buttons on the projector or remote control unit to select an item, then press the I or

H buttons to change the setting.

OPTION

OSD

AUTO SEARCH

AUTO SIGNAL

AUTO KEYSTONE

RGB2 SELECT

RGB/YP

B

P

R

VGA60/525P

BLACKBORD

BACK COLOR

NEXT PAGE @

SELECT:[^][@]

ADJUST:[{][}]

OFF

OFF

OFF

OFF

INPUT

RGB

VGA60

OFF

BLUE

ON

ON

ON

ON

OUTPUT

YP

B

P

R

525P

ON

BLACK

ESC:[MENU]

OPTION

PREVIOUS PAGE ^

FRONT/REAR

DESK/CEILING

FAN CONTROL

LAMP POWER

LAMP RUN TIME

FUNC1

CONTROL KEY

AUTO POWER OFF

FRONT

DESK

STANDARD

LOW

REAR

CEILING

HIGH

HIGH

MUTE

10 H

KEYSTONE

OFF

DISABLE

ON

SELECT:[^][@]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

OSD

ON

The current input name is displayed in the top-right corner of the screen when the input signal is changed.

OFF

Use this setting when you do not want the current input name to be displayed.

AUTO SEARCH

ON

The input signal will be detected and selected automatically when the Input select (RGB, VIDEO) buttons are pressed for a few seconds. (page 14)

OFF

AUTO SEARCH is disabled.

NOTE:

B AUTO SEARCH will not function when the input signal is being projected.

(PT-L735NTE only)

AUTO SEARCH will not function when NETWORK or SD CARD is selected. NETWORK and

SD CARD cannot be searched even when these signals are being input.

AUTO SIGNAL

This should normally be set to “ON”.

ON

AUTO SETUP will be carried out automatically when the input signal is changed. (page 27)

OFF

AUTO SETUP will not function when the input signal is changed.

AUTO KEYSTONE

This should normally be set to “ON”.

ON

During automatic setup, the angle of tilt of the projector is detected and keystone distortion is corrected automatically.

OFF

Use this setting when you do not want automatic keystone correction to be carried out during automatic setup, such as when the screen itself is at an angle.

RGB2 SELECT

This setting is used to select the function of the RGB2 IN/RGB1 OUT connector.

E

NGLISH

-45

RGB/YP

B

P

R

This setting is valid when 750p,

HDTV60, HDTV50, 525p, 625i and

525i signals are being input. Select the setting in accordance with the input signal.

The RGB/YP

B

P

R item is displayed when the RGB1 IN or RGB2 IN connector has a signal being input.

VGA60/525P

When a VGA60 or 525p RGB signal is being input, select the signal in accordance with the input signal.

BLACKBOARD

Set to “ON” when PICTURE MODE is set to BLACKBOARD. (Refer to page 37.)

BACK COLOR

This sets the colour which is projected onto the screen when no signal is being input to the projector.

FRONT/REAR

This setting should be changed in accordance with the projector setting-up method.

Set to “FRONT” when using a normal reflective screen with the projector positioned in front of the screen, and set to “REAR” when using a translucent screen with the projector positioned behind the screen.

DESK/CEILING

This setting should be changed in accordance with the projector setting-up method.

Set to “DESK” when setting up the projector on a desk or similar, and set to “CEILING” when suspending the projector from the ceiling using the ceiling bracket which is sold separately.

46-E

NGLISH

FAN CONTROL

Set FAN CONTROL to “HIGH”, when using this projector at high elevations (above 1 400 m) only.

LAMP POWER

This setting changes the lamp brightness. When set to “LOW”, the luminance of the lamp is reduced, but the projector uses less power, and the operating noise is also reduced.

This can help to extend the lamp’s operating life. If using the projector in small rooms where high luminance is not required, it is recommended that you set the LAMP POWER to “LOW”.

LAMP RUN TIME

This setting displays the usage time for the lamp unit which is currently being used.

NOTE:

B The lamp’s operating life varies depending on the usage conditions (such as the LAMP

POWER setting and the number of times the power is turned on and off).

FUNC 1

This assigns a function to the FUNC1 button of the remote control unit .

MUTE

Functions in the same way as the

MUTE function. (page 44)

KEYSTONE

Functions in the same way as when

“KEYSTONE” is selected from the

POSITION menu screen. (page 41)

CONTROL KEY

To disable the buttons on the projector, set CONTROL KEY to

“OFF”. A confirmation screen will then be displayed. Select “OK” by using I and H buttons. To use the buttons on the projector, set to “ON” by using the remote control unit.

AUTO POWER OFF

If any signal is not input into the projector during the time that you set up, the projector will return to standby mode. The auto power off time can be set to, from 15 minutes to 60 minutes, by 5 minutes. If you don't use this feature, set it to “DISABLE”.

This feature will not function under the following situation.

1) When using the freeze function.

2) When the NETWORK or SD

CARD is selected (PT-L735NTE only).

3) When writing the data in the SD memory card (PT-L735NTE only).

NOTE:

(PT-L735NTE only)

B When the projector is connected to a personal computer by means of the wireless network using the accessory wireless card, the projector will go in the

WEB STANDBY. (page 48)

E

NGLISH

-47

Network setup

(PT-L735NTE only)

You need make adjustment on some items when controlling the projector with a personal computer by means of the wireless network. Refer to the accessory CD-ROM for details.

NETWORK

NETWORK

EASY CONNECT

HOSTNAME

WEB CONTROL

WEB STANDBY

WEB PASSWORD

SD MODE

LAN1

OFF

PANASONIC L735NT

OFF ON

OFF

ON

ON

WEB CONTROL

To control the projector with a personal computer by means of the wireless network, set the WEB CONTROL to

“ON”. To prevent it, set to “OFF”.

SELECT:[^][@]

調整:[←][→]

ENTER:[ENTER]

ESC:[MENU]

NETWORK

VIEWER WEB

Network settings can be selected and you can then make further settings.

WEB STANDBY

To turn on and off the power with a personal computer by means of the wireless network, set the WEB

STANDBY to “ON”.

When the WEB STANDBY is set to

“ON”, the cooling fan operates and the power indicator on the projector flashes slowly in red.

EASY CONNECT

This item is for setting whether the

EASY CONNECT function is used or not.

WEB PASSWORD

You can set the password for controlling the projector with a personal computer by means of the wireless network.

HOSTNAME

The host name for this projector can be set.

SD MODE

The playback methods can be set when SD CARD is selected.

SD card setup

(PT-L735NTE only)

The following settings are used when projecting the pictures recorded in the

SD memory card. Refer to the accessory CD-ROM for details.

SD CARD

AUTOPLAY

REPEAT

INTERVAL

SELECT:[^][@]

ADJUST:[{][}]

OFF ON

1

5 sec

ENTER:[ENTER]

ESC:[MENU]

AUTO PLAY

Plays the pictures recorded in the

SD memory card automatically.

REPEAT

This setting is for adjusting the times of the auto play.

INTERVAL

This setting is adjusting the interval of the auto play.

48-E

NGLISH

Setting up the SECURITY function

This projector is equipped with a security function. A password input screen can be displayed, or a company URL can be set up and displayed at the bottom of the projected image. A logo also can be displayed before projection.

Use the I and H buttons on the projector or remote control unit to select SECURITY, then press the G button.

SECURITY

PASSWORD SETTING

CHANGE PASSWORD

TEXT DISPLAY

CHANGE TEXT

LOGO DISPLAY

LOGO CLEAR

LOGO CAPTURE

INVALID

OFF

OFF

VALID

ON

ON

PASSWORD SETTING

The password input screen can be displayed when the power is turned on. All of the controls other than the

POWER button are disabled unless the password is entered correctly.

VALID

PASSWORD SETTING is enabled.

INVALID

PASSWORD SETTING is disabled.

The password input screen will not be displayed when the power is turned on.

PASSWORD

CHANGE PASSWORD

Passwords can be changed.Press

the ENTER button to display the

CHANGE PASSWORD screen.

OK:[ENTER] CANCEL :[MENU]

(When you use the SECURITY function for the first time)

Press the F, H, G, I, F, H, G and I buttons in order, then press the ENTER button.

(When a password change has been made before)

Type in the changed password, then press the ENTER button.

SECURITY

PASSWORD SETTING

CHANGE PASSWORD

TEXT DISPLAY

CHANGE TEXT

LOGO DISPLAY

LOGO CLEAR

LOGO CAPTURE

INVALID

OFF

OFF

VALID

ON

ON

NEW

CONFIRM

OK:[ENTER] CANCEL :[MENU]

#

Set a password by pressing the

F,G,I, and H buttons on the remote control unit. (A maximum of 8 buttons can be set.)

$

Press the ENTER button.

%

Enter the password again for confirmation.

& Press the ENTER button.

(Password change will be completed.)

SELECT:[^][@] [{][}]

ADJUST:[{][}]

ENTER:[ENTER]

ESC:[MENU]

E

NGLISH

-49

NOTE:

B The entered password will appear as . It will not be displayed on the screen.

B If you enter the wrong password, the letters

“PASSWORD” and “NEW” will become red. Enter the correct password again.

TEXT DISPLAY

The setup letters can be displayed at the bottom of the projected image while an image is projected.

ON

TEXT DISPLAY is enabled.

OFF

TEXT DISPLAY is disabled.

CHANGE TEXT

The setup letters which will be displayed when TEXT DISPLAY is set to “ON” can be changed.

Press the ENTER button to display the CHANGE TEXT screen.

Above: Setting before change

Below: Setting after change

Cursor

PANASONIC

ANASONIC

0 1 2 A E I M Q U Y ! % ) − ? '

3 4 5 B F J N R V Z ” & * : [ {

6 7 8 C G K O S W / # ’ + ;   |

9 . _ D H L P T X @ $ ( , < ] } a b c d e f g h i j k l m = ^ ∼ n o p q r s t u v w x y z > _

←   →        DELETE      ALL DELETE

             OK         CANCEL

Editing items

# Use the F, G, I and H buttons to select the characters, then press the ENTER button.

(You can enter 20 characters continuously.)

<Editing Items>

Moves cursor to left.

Moves cursor to right.

DELETE

Deletes a letter on the cursor.

ALL DELETE

Deletes all the letters.

$

Use the F, G, I and H buttons to select “OK”, then press the

ENTER button.

C Select “CANCEL” to cancel the change.

50-E

NGLISH

NOTE:

B The letters which cannot be input will be displayed in gray, and cannot be selected in

CHANGE TEXT.

LOGO DISPLAY

A logo can be displayed before projection.

ON

LOGO DISPLAY is enabled.

OFF

LOGO DISPLAY is disabled.

LOGO CLEAR

Captured logo data can be cleared.

Press the ENTER button to display the confirmation screen, and then select “OK”.

LOGO CAPTURE

A logo can be captured from the picture being projected. Press the

ENTER button to display the capture adjustment screen.

POSITION: [{ } ^ @]

CAPTURE:[ENTER]

CANCEL:[MENU]

Capturing frame

# Use the F G I H buttons to move the capturing frame to the area you want to capture.

$

Press the ENTER button.

C The letters “CAPTURE ...” and the progress status will be displayed while logo capture is being carried out.

NOTE:

B The size of the capturing frame varies depending on the signals being input.

B Fine images such as landscapes may be unable to be captured.

B Only RGB signals can be captured. (Except 525i, 625i,

525p, HDTV60, HDTV50, and

750p. Refer to page 62 for details.)

B Images with 512x384 pixels can be captured.

B It is recommended that you input XGA signals, and set

KEYSTONE to “0” when carrying out LOGO CAPTURE.

E

NGLISH

-51

When the TEMP indicator and the

LAMP indicator are illuminated

There are two indicators on the control panel of the projector which give information about the operating condition of the projector. These indicators illuminate or flash to warn you about problems that have occurred inside the projector, so if you notice that one of the indicators is on, turn off the power and check the table below for the cause of the problem.

LAMP indicator

TEMP indicator

Indicator display

Problem

Illuminated (red)

(Lamp unit on)

The ambient temperature or the temperature inside the projector has become unusually high or low.

TEMP indicator

Flashing (red)

(Lamp unit off)

The ambient temperature or the temperature inside the projector has become too high or low, causing the lamp unit to be automatically shut off.

Possible cause

B The ventilation holes may be covered.

B The ambient temperature in the place of use may be too high.

B The air filter may be blocked.

B The ambient temperature in the place of use may be too low.

Remedy

B Uncover the ventilation holes.

B Set up the projector in a place where the temperature is between 0 °C (32 °F) and 40 °C (104 °F) and the humidity is between 20% and 80% (with no condensation). [If you set the

FAN CONTROL to “HIGH” (page 46), set up the projector in a place where the temperature is between 0 °C (32 °F) and 35 °C

(95 °F) and the humidity is between 20% and 80% (with no condensation).]

B Turn off the MAIN POWER switch by following the procedure on page 25, and then clean the air filter (refer to page 54).

52-E

NGLISH

LAMP indicator

Indicator display

Illuminated (red)

Problem

It is nearly time to replace the lamp unit.

Possible cause

B Does “REPLACE

LAMP” appear on the screen after the projector is turned on?

Flashing (red)

An abnormality has been detected in the lamp circuit.

B The power may have been turned on straight away after it was turned off.

B There may be an abnormality in the lamp circuit.

Remedy

B This occurs when the operation time for the lamp unit is nearing 1800 hours. (when

LAMP POWER has been set to

“HIGH”) Ask your dealer or an

Authorised

Service Centre to replace the lamp unit.

B Wait for a while until the lamp unit cools down before turning the power back on again.

B Turn off the MAIN

POWER switch by following the procedure given on page 25, and then contact an

Authorised

Service Centre.

NOTE:

B Be sure to turn off the MAIN POWER switch by following the procedure given in “Turning off the power” on page 25 before carrying out any of the procedures in the “Remedy” column.

B If the main power turns off after the TEMP indicator starts flashing, it means that an abnormality has occurred. Please contact an Authorised

Service Centre so that the necessary repairs can be made.

E

NGLISH

-53

Cleaning and replacing the air filter

If the air filter becomes clogged with dust, the internal temperature of the projector will rise, the TEMP indicator will flash and the projector power will turn off. The air filter should be cleaned after every 100 hours of use.

# Turn off the MAIN POWER

switch and disconnect the mains lead plug from the mains socket.

Turn off the MAIN POWER switch according to the procedure given in “Turning off the power” on page 25 before disconnecting the plug from the mains socket.

$ Gently turn the projector

upside down.

& Clean the air filter.

Soak the air filter in water and wash out dirt by hand.

NOTE:

B Place the projector on top of a soft cloth so that it will not become scratched.

% Remove the air filter.

Put your fingernails under the air filter and pull the air filter out of the projector.

Air filter

NOTE:

B Do not use detergent.

B Be careful not to separate the air filter cover from the frame when washing the air filter.

' Dry the air filter and install it to

the projecter.

NOTE:

B Be sure to install the air filter cover before using the projector. If the projector is used without the air filter cover installed, dust and other foreign particles will be drawn into the projector, and malfunctions will result.

B If the dust cannot be removed by cleaning, it is time to replace the air filter. Please consult your dealer.

Furthermore, if the lamp unit is being replaced, replace the air filter at this time also.

54-E

NGLISH

Replacing the lamp unit

Warning

When replacing the lamp, allow it to cool for at least one hour before handling it.

B The lamp cover gets very hot, and contact with it can cause burns.

Notes on replacing the lamp unit

B The light generating lamp is made of glass, so dropping it or allowing it to hit hard objects may cause it to burst. Be careful when handling the lamp.

B After having removed the old lamp, carelessly discarding it can cause the lamp to burst. Dispose of the lamp with the same care that would be taken with a fluorescent light.

B A Phillips screwdriver is necessary for removing the lamp unit. Make sure that your hands are not slippery when using the screwdriver.

Lamp unit replacement period

The lamp is a consumable product.

Even when the full life of the bulb has not been exhausted, the brightness of the light will gradually decline. Therefore periodic replacement of the lamp is necessary.

The intended lamp replacement interval is 2 000 hours, but it is possible that the lamp may need to be replaced earlier due to variables such as a particular lamp’s characteristics, usage conditions and the installation environment.

Early preparation for lamp replacement is encouraged.

A lamp that has exceeded 2 000 hours of use has a much greater chance of exploding. In order to prevent the lamp from exploding, the lamp will be automatically shut off when 2 000 hours of use have been reached.

NOTE:

B The projector is not supplied with a replacement lamp unit.

Please ask your dealer for details. Lamp unit product no.: ET-LA735

CAUTION:

B Do not use any lamp unit other than the one with the product number indicated above.

NOTE:

B The usage hours explained above are for use when the

HIGH setting has been selected for LAMP POWER in the OPTION menu. If the

“LOW” setting is selected, the brightness of the lamp will be less and life of the lamp can be extended.

B While 2 000 hours is the intended replacement interval, it is not a period of time covered by warranty.

E

NGLISH

-55

On-screen display Lamp indicator warning light

More than 1 800 hours

More than 2 000 hours

Displayed for 30 seconds. Pressing any button will clear the display.

Remains displayed until any button is pressed.

Illuminates red during image projection and standby mode.

Lamp unit replacement procedure

NOTE:

B If the lamp usage time has passed 2 000 hours (when LAMP POWER has been set to “HIGH”), the projector will switch to standby mode after approximately 10 minutes of operation. The steps ) to - on the next page should thus be completed within 10 minutes.

# Turn off the MAIN POWER

switch according to the procedure given in “Turning off the power” on page 25, and then disconnect the mains lead plug from the mains socket and check that the area around the lamp unit has cooled down.

$ Use a Phillips screwdriver to

turn the lamp unit cover fixing screws at the bottom of the projector, and then remove the lamp unit cover from the projector.

Lamp unit cover

% Use a Phillips screwdriver to

loosen the two lamp unit fixing screws until the screws turn freely. Then hold the handle of the lamp unit and gently pull it out from the projector.

Lamp unit fixing screws

Handle

& Insert the new lamp unit while

making sure that the direction of insertion is correct, and then use a Phillips screwdriver to securely tighten the lamp unit fixing screws.

Lamp unit cover fixing screws

56-E

NGLISH

' Install the lamp unit cover, and

then use a Phillips screwdriver to securely tighten the lamp unit cover fixing screws.

NOTE:

B Be sure to install the lamp unit and the lamp unit cover securely.

If they are not securely installed, it may cause the protection circuit to operate so that the power cannot be turned on.

( Insert the mains lead plug into

the mains socket and then press the MAIN POWER switch.

NOTE:

B If the POWER indicator on the projector does not illuminate red when the MAIN POWER switch is turned on, turn the MAIN

POWER switch off again, unplug the mains lead from the electrical outlet, and check that the lamp unit and the lamp unit cover are securely installed. Then turn the

MAIN POWER switch back on.

) Press the POWER button so

that a picture is projected onto the screen.

* Press the MENU button to

display the MENU screen, and select “OPTION” by pressing

OPTION

OSD

AUTO SEARCH

AUTO SIGNAL

AUTO KEYSTONE

RGB2 SELECT

RGB/YP

B

P

R

VGA60/525P

BLACKBORD

BACK COLOR

NEXT PAGE @

SELECT:[^][@]

ADJUST:[{][}]

OFF

OFF

OFF

OFF

INPUT

RGB

VGA60

OFF

BLUE

ON

ON

ON

ON

OUTPUT

YP

B

P

R

525P

ON

BLACK

ESC:[MENU]

+ Select the “LAMP RUN TIME”

by pressing the F or G

buttons.

OPTION

PREVIOUS PAGE ^

FRONT/REAR

DESK/CEILING

FAN CONTROL

LAMP POWER

LAMP RUN TIME

FUNC1

CONTROL KEY

AUTO POWER OFF

FRONT

DESK

STANDARD

LOW

REAR

CEILING

HIGH

HIGH

1820 H

MUTE

OFF

KEYSTONE

DISABLE

ON

SELECT:[^][@] ENTER:[ENTER]

ESC:[MENU]

, Press and hold the ENTER

button for approximately 3 seconds.

LAMP TIME RESET

OK

Power OFF

CANCEL

-

The “LAMP TIME RESET” will be displayed.

Select “OK” by pressing the

ENTER button.

NOTE:

B If “CANCEL” is selected in step

-

, the operation for resetting the lamp time will be cancelled.

.

Turn off the power.

This will reset the cumulative usage time for the lamp unit to zero.

Refer to page 25 for details on how to turn off the power.

E

NGLISH

-57

Before calling for service

Before calling for service, check the following points.

Problem

Power does not turn on.

No picture appears.

The picture is fuzzy.

COLOR is too light or TINT is poor.

No sound can be heard.

Possible cause

B The mains lead may not be connected.

B The MAIN POWER switch is turned off.

B The main power supply is not being supplied to the mains socket.

B TEMP indicator is illuminated or flashing.

B LAMP indicator is illuminated or flashing.

B The lamp unit cover has not been securely installed.

B The video signal input source may not be connected properly.

B The input selection setting may not be correct.

B The BRIGHT adjustment setting may be at the minimum possible setting.

B The shutter function may be in use.

B The lens cover may still be attached to the lens.

B The lens focus may not have been set correctly.

B The projector may not be at the correct distance from the screen.

B The lens may be dirty.

B The projector may be tilted too much.

B COLOR or TINT adjustment may be incorrect.

B The input source which is connected to the projector may not be adjusted correctly.

B The audio signal source may not be connected properly.

B The volume adjustment may be at the lowest possible setting.

B A cable may be connected to the AUDIO OUT jack.

Page

24

38

The remote control unit does not operate.

The buttons on the projector do not function.

B The MUTE function may be active.

B The battery may be weak.

B The battery may not be inserted correctly.

B The remote control signal receptor on the projector may be obstructed.

B The remote control unit may be out of the operation range.

B The CONTROL KEY may be set to “OFF”.

In order to set the CONTROL KEY to “ON” without using the remote control unit, keep holding down the ENTER button on the projector and press the

MENU button for more than 2 seconds. It will then be turned ON.

52

53

19

38

29,

44

20,

21

44

22

22

28

24

19

22

47

58-E

NGLISH

Problem

The picture does not display correctly.

Picture from computer does not appear.

Possible cause

B The signal format (TV system) may not be set correctly.

B There may be a problem with the video tape or other signal source.

B A signal which is not compatible with the projector may be being input.

B The cable may be too long.

B The external video output for the laptop computer may not be set correctly.

(You may be able to change the external output settings by pressing the [Fn]+[F3] or [Fn]+[F10] keys simultaneously. The actual method varies depending on the type of computer, so refer to the documentation provided with your computer for further details.)

B If an RGB input indicator is turned off, the video signals may not be output from the computer.

B RGB2 SELECT in the OPTION menu is set to

OUTPUT when the signals are input to RGB2 IN /

RGB1 OUT connector.

Page

38

62

14,

26

45

Cleaning and maintenance

Before carrying out cleaning and maintenance, be sure to disconnect the mains lead plug from the mains socket.

Wipe the cabinet with a soft, dry cloth.

If the cabinet is particularly dirty, soak the cloth in water with a small amount of neutral detergent in it, squeeze the cloth very well, and then wipe the cabinet. After cleaning, wipe the cabinet dry with a dry cloth. If using a chemically-treated cloth, read the instructions supplied with the cloth before use.

Do not wipe the lens with a cloth that is dusty or which produces lint.

If any dust or lint gets onto the lens, such dust or lint will be magnified and projected onto the screen. Use a blower to clean any dust and lint from the lens surface, or use a soft cloth to wipe off any dust or lint.

E

NGLISH

-59

Specifications

Power supply:

Power consumption:

Amps:

LCD panel:

Panel size (diagonal):

Aspect ratio:

Micro lens array:

Display method:

Drive method:

Pixels:

Lens:

Lamp:

Luminosity:

UHM lamp (200 W)

2 600 lm/ANSI

Scanning frequency(for RGB signals):

Horizontal scanning frequency: 15 kHz–91 kHz

Vertical scanning frequency: 50 Hz–87 Hz

Dot clock frequency: Less than 100 MHz

YP

B

P

R signals:

Colour system:

525i (480i), 525p (480p), 625i (576i),

750p (720p), 1 125i (1 080i)

7 (NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/

PAL60/SECAM)

Projection size:

Throw distance:

Optical axis shift:

Screen aspect ratio:

Installation:

Speaker:

Max. useable volume output:

Connectors

RGB IN/OUT:

100 V–240 V ~, 50 Hz/60 Hz

280 W (During standby (when fan is stopped): Approx. 5 W - 7 W)

[When the WEB STANDBY is set to “ON”

(PT-L735NTE only) : Approx. 30 W (page 48)]

3.5 A–1.8 A

0.9 type (22.86 mm)

4:3 (16:9 compatible)

Available

3 transparent LCD panels (RGB)

Active matrix method

786 432 (1 024 x 768) x 3 panels

Manual zoom (1 - 1.3) / focus lens

F 1.7 - 2.1, f 28.7 mm - 36.0 mm

1 016 mm - 7 620 mm (40˝ - 300˝)

1.2 m - 11.8 m (3´11˝ - 38´8˝)

9:1 (fixed)

4:3

Front/Rear/Ceiling/Desk (Menu selection method)

2 pieces

5 W + 5 W (Stereo)

Dual-line D-SUB HD 15-pin (female)

(One-line is available for input and output)

During YP

B

P

R input/output:

Y:

P

B

,P

R

:

1.0 V [p-p], 75

0.7 V [p-p], 75

60-E

NGLISH

During RGB input/output:

R.G.B.:

G.SYNC:

HD/SYNC:

VD:

0.7 V [p-p], 75

1.0 V [p-p], 75

TTL, automatic plus/minus polarity compatible

TTL, automatic plus/minus polarity

AUDIO IN (for RGB):

MINI)

VIDEO IN:

S-VIDEO IN:

Single-line, RCA pin jack

1.0 V [p-p], 75

Single-line, Mini DIN 4-pin

Y 1.0 V [p-p], C 0.286 V [p-p], 75

AUDIO IN (for S-VIDEO/VIDEO): 0.5 V [rms] RCA pin jack x 2 (L-R)

AUDIO OUT: compatible

Single-line 0.5 V [rms] M3 jack (Stereo

Serial connector:

M3 jack (Stereo MINI) (Monitor output/stereo compatible)

0 V [rms] - 2.0 V [rms] (variable)

D-sub 9p (female) RS-232C compatible

Cabinet:

Dimensions:

Width:

Height:

Length:

Moulded plastic (ABS/PC)

248 mm (9-3/4˝) (Not including projecting parts)

115 mm (4-1/2˝)

359 mm (14-1/8˝) (Not including lens)

Weight:

Operating environment:

Temperature:

4.2 kg (9.3 lbs.)

Humidity:

Certifications:

0 °C–40 °C (32 °F–104 °F)

[When the FAN CONTROL is set to “HIGH”

(page 46); 0 °C–35 °C (32 °F–95 °F)]

20%–80% (no condensation)

EN60950, EN55022, EN61000-3-2,

EN61000-3-3, EN55024

<Remote control unit>

Power supply:

Operating range:

3 V DC (AAA battery x2)

Approx. 7 m (23´) (when operated directly in front of signal receptor)

108 g (3.8 ozs.) (including batteries) Weight:

Dimensions:

Width:

Length:

Height:

<Options>

Ceiling bracket

Wireless mouse receiver

Wide conversion lens

Wireless card

33 mm (1-9/32˝)

168 mm (6-19/32˝)

40 mm (1-9/16˝)

ET-PK735

ET-RMRC2

ET-LEC701

ET-CDWL2E

ET-CDWL2ES (for Spain)

ET-CDWL2SG (for Singapore)

ET-CDWL2U (for Malaysia)

E

NGLISH

-61

Appendix

List of compatible signals

Mode

Display resolution

(dots)* 1

Scanning frequency

H

(kHz)

V

(Hz)

15.734

59.940

Dot clock frequency

(MHz)

Picture quality* 2

Resizing* 3 Format

NTSC/NTSC4.43/

PAL-M/PAL60

PAL/PAL-N/SECAM

525i

625i

525p

HDTV60

HDTV50

750P

VESA70

VESA85

VGA60

VGA65

VGA72

VGA75

*4

VGA85

SVGA55

SVGA60

SVGA70

SVGA75

SVGA85

MAC16

XGA60

*4

*4

XGA70

XGA75

XGA85

XGA85i

MXGA70

MXGA75

MXGA85

MAC21

MSXGA60

SXGA60

*4

*4

SXGA75

SXGA85

SXGA60+

UXGA60

*4

*4

720 x 480i

720 x 576i

720 x 480i

720 x 576i

640 x 400

640 x 400

640 x 480

640 x 480

640 x 480

640 x 480

640 x 480

800 x 600

800 x 600

800 x 600

800 x 600

800 x 600

832 x 624

1 024 x 768

1 024 x 768

1 024 x 768

1 024 x 768

1 024 x 768i

1 152 x 864

1 152 x 864

15.625

50.000

15.734

59.940

15.625

50.000

720 x 483 31.469

59.940

1 920 x 1 080i 33.750

60.000

1 920 x 1 080i

1 280 x 720

28.125

45.000

31.469

35.000

37.861

72.809

37.500

75.000

43.269

35.156

46.875

53.674

49.725

74.550

48.363

60.004

56.476

60.023

50.000

60.000

31.469

70.086

37.861

85.081

59.940

66.667

85.008

56.250

37.879

60.317

48.077

72.188

75.000

85.061

70.069

75.029

68.678

84.997

35.520

86.952

13.500

13.500

27.000

74.250

74.250

74.250

25.175

31.500

25.175

30.240

31.500

31.500

36.000

36.000

40.000

50.000

49.500

56.250

57.283

65.000

75.000

78.750

94.500

44.897

63.995

71.184

94.200

67.500

74.917

108.000

1 152 x 864

1 152 x 870

76.705

85.038

121.500

68.681

75.062

100.000

1 280 x 960 60.000

60.000

108.000

1 280 x 1 024 63.981

60.020

108.000

1 280 x 1 024 79.977

75.025

135.001

1 280 x 1 024 91.146

85.024

157.500

1 400 x 1 050 63.981

60.020

108.000

1 600 x 1 200 75.000

60.000

162.000

A OK Video/S-Video

OK

OK

OK

OK

OK

OK Video/S-Video

OK

OK

OK

YP

YP

YP

B

B

B

P

P

P

R

R

R

/RGB

/RGB

/RGB

YP

B

P

R

/RGB

OK

OK

OK

OK

OK

OK

OK

OK

YP

B

P

R

/RGB

YP

B

P

R

/RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

RGB

B

B

B

B

AA

AA

A

B

B

B

B

B

A

AA

AA

AA

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

A

*1 The “i” appearing after the resolution indicates an interlaced signal.

*2 The following symbols are used to indicate picture quality.

AA Maximum picture quality can be obtained.

A Signals are converted by the image processing circuit before picture is projected

B Some loss of data occurs to make projection easier.

*3 Signals with “OK” in the Resizing column can be set using the RESIZING command in the POSITION menu. (Refer to page 43.)

*4 Signals that are compatible with the FRAME LOCK function. (page 43.)

62-E

NGLISH

Connector pin wiring

B The pin layout and signal names for the S-VIDEO IN connector are shown below.

# $

Pin No.

Signal

# Earth (Luminance signal)

%

External view

&

$

%

&

Earth (Colour signal)

Luminance signal

Colour signal

B The pin layout and signal names for the RGB/YP

B

P

R

(RGB1 IN/RGB2 IN) connector are shown below.

Pin No.

Signal

1

#

R/P

R

( ,

$

%

G/G·SYNC/Y

B/P

B

# '

.

/

SDA

HD/SYNC

External view

0 VD

1 SCL

Pin + is spare.

Pins &–*, , and - are for earth.

Pins . and 1 functions are only valid when supported by the computer

Projection dimensions calculation methods

If the screen size (diagonal) is SD (m), then the following formula is used to calculate the projection distance for the wide lens position (LW) and the projection distance for the telephoto lens position (LT).

4:3

SD

LW/LT SW

Minimum Projection Distance

Maximum Projection Distance

LW=0.031xSD/0.0254-0.068

LT=0.0393xSD/0.0254-0.066

For 16:9 aspect ratios, the following formula can be used to calculate the projection distance.

Minimum Projection Distance

Maximum Projection Distance

LW=0.034xSD/0.0254-0.068

LT=0.043xSD/0.0254-0.066

E

NGLISH

-63

Using the SERIAL connector

The serial connector which is on the side connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connector.

Connection

SERIAL(female)

D-Sub9p (male)

Communication cable

Computer

NOTE:

B Use a proper communication cable which is suitable for the personal computer to connect the serial connector and the personal computer.

Communications settings

Signal level

Sync. method

Baud rate

RS-232C

Asynchronous

9 600 bps

Parity None

Character length 8 bits

Stop bit

X parameter

1 bit

None

S parameter None

Basic format

The data sent from the computer to the projector is transmitted in the format shown below.

STX Command : Parameter ETX

Pin layout and signal names for SERIAL connector

6 9

Start byte

(02h)

3 bytes

1 byte End byte

1 byte–5 bytes

(03h)

1 5

D-SUB 9-pin connector seen from outside

Pin

No.

Signal name

Contents

# NC

$ TXD Transmitted data

% RXD Received data

&

NC

' GND

( DSR

) CTS Connected internally

*

RTS

+ NC

64-E

NGLISH

NOTE:

B If sending multiple commands, check that a response has been received from the projector for one command before sending the next command.

B When a command which does not require parameters is sent, the colon (:) is not required.

B If an incorrect command is sent from the personal computer, the “ER401” command will be sent from the projector to the personal computer.

Control commands

The commands which the personal computer can use to control the projector are shown in the following table.

Command

Control

Contents

Remarks

PON

POF

AVL

Power ON

Power OFF

Volume

In standby mode, all commands other than the PON command are ignored.

B The PON command is ignored during lamp ON control.

B If a PON command is received while the cooling fan is operating after the lamp has switched off, the lamp is not turned back on again straight away, in order to protect the lamp.

Parameter

000–063(Adjustment value 0–63)

IIS

Input signal selection

Parameter

VID=VIDEO SVD=S-VIDEO

RG1=RGB1(YP

B

P

R

1) RG2=RGB2(YP

B

P

R

2)

NWP=NETWORK SDC=SDCARD

Q$S

OSH

Lamp ON condition query

Shutter function

Parameter

0 = Standby

1 = Lamp ON control active

2 = Lamp ON

3 = Lamp OFF control active

Operation will be switched between ON and

OFF each time the command is sent. Do not switch operation ON and OFF after only short periods of time.

Cable specifications

(When connected to a personal computer)

At the projector

6

7

4

5

8

9

1

2

3

NC

NC

NC

NC

At the computer

(DTE specifications)

NC

1

2

NC

NC

NC

6

7

8

9

3

4

5

E

NGLISH

-65

Dimensions

<Units: mm (inch)>

LCD Projector Commercial Use

Operating Instructions

Model No.

PT-L735NTE

PT-L735E

R

16(-5/8)

248(9-3/4)

*Not including lens and projecting parts

Trademark acknowledgements

B The SD logo is a trademark.

B Windows is a trademark or registered trademark of Microsoft Corporation in the United States of America and other countries.

B VGA and XGA are trademarks of International Business Machines

Corporation.

B Macintosh is a registered trademark of Apple Computer, Inc.

B S-VGA is a registered trademark of the Video Electronics Standards

Association.

All other trademarks are the property of the various trademark owners.

POWER AUTO SETUP

RGB LASER

VIDEO MENU

PAGE

R-CLICK ENTER

FREEZE SHUTTER

FUNC1 STD

Computer Projector

66-E

NGLISH

These Operating Instructions are printed on recycled paper.

Before operating this product, please read the instructions carefully and save this manual for future use.

TQBJ 0126-1

Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project