Haier LE22T3 Flat Panel Television Owner`s manual

Add to My manuals
26 Pages

advertisement

Haier LE22T3 Flat Panel Television Owner`s manual | Manualzz
0090509636
T F T - L CD T E LE V I S I O N
O WN ER ` S M A N UA L
MOD EL: L 42T 1
L47 T 1
L52T 1
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
0090509121
01
00000321366
技 术 要 求
1.图中版面按照182*257尺寸;合计30页。
2.材质要求:70g双胶
3.符合集团绿色环保标准Q/HR 091 054。
4.按照集团说明书的标准Q/HR 0903 002执行。
5
孔 繁荔
徐冬
崔 志龙
陈莹
A4
LE 1 9T 3 / L2 4K 3
(印 度 )
使用 说 明 书
A版
(01版)
0090509636
A
1:1
38
商品开发部 结构所
OWNER’S MANUAL
LE19T3/LE22T3/LE19T3W/
LE22T3W/LE24T3/L24K3
LED-LCD TELEVISION
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Contents
Contents
Warning
3
Important Safety Instructions
4
Panel Control and Rear Terminals
Control
6
Panel Control........................................................ 6
Rear Terminals Control......................................... 6
Remote Control
7
Battery loading..................................................... 7
Precautions........................................................... 7
Remote Control Function
8
Function introduction.......................................... 8
External Equipment Connections
9
Antenna Connection............................................ 9
Choose Your Connection....................................10
VCR Connection................................................................... 10
DVD Setup............................................................................. 10
HDMI or DVI Setup.............................................................. 11
PC Setup................................................................................. 11
Monitor Out Setup.............................................................. 12
Connecting Headphones...................................12
Power source.......................................................12
Basic Receiving and Playing
Operations 12
Switching ON/OFF the TV set ............................12
Switching ON/OFF the TV set......................................... 13
Choose the Menu Language........................................... 13
Choose the Input source.................................................. 13
Searching Channel . ...........................................13
Channel Edit.......................................................................... 13
Automatic search................................................................ 14
Exchange................................................................................ 14
Watching TV Program........................................15
How to select the desired program.............................. 15
How to select the desired sound................................... 15
Mute Setting......................................................................... 15
Quick program view........................................................... 15
2
LED -LCD television Owner’s Manual
Picture Control Functions..................................15
How to select the picture mode.................................... 15
How to customize your own picture status............... 16
Sound Control Functions...................................16
How to choose audio mode............................................ 16
How to customize your own audio status.................. 17
Timer Functions..................................................17
Setting of Current Time..................................................... 17
Setting of ON/OFF Time.................................................... 18
Setting of On Channel....................................................... 18
Setting of Remind Time and Remind Channel......... 18
Function Menu....................................................19
Function Menu Set............................................................. 19
Adjust Menu........................................................20
Lock Setup...........................................................20
How to use the password function............................... 20
Streaming Media Playing System.....................21
Start/Exit Streaming Media Playing system............... 21
Operating Method of Streaming Media Menu......... 22
Playing a Picture.................................................................. 22
Playing a Movie.................................................................... 22
Playing Music ......................................................................... 23
Text . ......................................................................................... 23
Settings ................................................................................... 23
Maintenance
23
Troubleshooting
24
Specification
24
Format
25
Warning
Warning
WARNING:
!
WARNING
RISK ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
* To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any
accessory inside the casing.
* lf necessary, please contact authorized after-sales services.
* A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided, could result in
serious injury by high voltage.
* An exclamation mark in a triangle: Major part or accessory of which technical specifications must be followed if
it is to be replaced.
WARNING: To avoid fire or electric hazards, never place your television receiver in an area with heavy
moisture. Attention should be paid to avoid accidental scratches or impacts onto the screen.
CAUTION: ▲ Please read this manual carefully before using your television and keep this manual in a
good place for future reference.
▲ To achieve the best performance of your television, read this User’s Manual carefully and
properly store it for future reference.
▲ Information of screen displays and figures in the User’s Manual may vary due to technical
innovations.
CAUTION:
▲ Unauthorized disassembly of this product is prohibited.
LED -LCD television Owner’s Manual
3
Important Safety Instructions
Important Safety Instructions
4
LED -LCD television Owner’s Manual
Important Safety Instructions
LED -LCD television Owner’s Manual
5
Panel Control and Rear Terminals Control
Panel Control and Rear Terminals Control
- This is a simplified representation of front panel.
- Here shown may be somewhat different from your TV.
Panel Control
SOURCE
LED
LE22T3W “TV/AV”
LCD
Rear Terminals Control
5
6
7
8
DIGITAL OUT
(COAXIAL)
9
HDMI IN
PC IN
1
3
2
4
1 COMPONENT In
2 AV IN
3 PC IN
4 AV OUT
5 DC IN
6
10
Connect a component Video/Audio device to
these jacks
Connect Video/Audio out from an Video/Audio
device to these jacks
Connect the monitor output connector from a PC
to the jack
Video/Audio output terminal
Connect the monitor output connector from a DC
to the jack(not available for the L24K3 model)
LED -LCD television Owner’s Manual
6 Headphone
7 USB
DIGITAL
OUT(COAXIAL)
9 HDMI
8
0 PC/DVI AUDIO
Headphone audio output terminal.
Connect a USB flash drive to view PPEG2
videos,JPEG images or listen to MP3 songs.
Digital/Coaxial output terminal
Connect a signal to HDMI
Connect a PC/DVI Audio device to these jacks
Remote Control
Remote Control
Battery loading
1. Slide open the cover of the battery compartment on
the back of the remote controller.
2. Load two 7# (AAA) alkaline batteries in the
compartment, (plus and minus poles to respective mark)
3. Replace the cover of the battery compartment.
Precautions
As strong light may interfere the signals, change your
position to operate the remote controller if the television
cannot be turned on or off as you expect.
Keep the remote controller away from heat source or
humid area to ensure effective performance of the
remote controller.
Make sure that two AAA alkaline batteries are loaded.
The batteries must be of the same type. The batteries
must be located properly. The batteries are not
rechargeable.
Make sure that there is no obstacle between the remote
controller and television set.
LED -LCD television Owner’s Manual
7
Remote Control Function
Remote Control Function
- The remote control cannot be operated unless the batteries are properly loaded.
- When using the remote control, aim it at the remote control sensor on the TV.
Function introduction
5 HDMI
6 Sound Mode
7 ARC
Press this key to start TV from standby mode, press it again to return to standby
mode.
It is only available in TV mode.
Press this key continuously to select the picture mode.
Press once to display a frozen image of the current program, but audio
continues. Press again to return to the program.
Press to select a device connrcted to the HDMI input.
Press this key continuously to select the sound mode.
Press this key to select the screen display proportion.
8 SLEEP
Displaying the sleep time.
H. LOCK
I/II
FAVORITE
0-9
SOURCE
D DISPLAY
Refer to the Functional Description on Page 20
No available
Press to open the favorite channel list in TV.
These keys are used to select a channel.
Press this key to open/close signal source options menu.
1 POWER
2 SCAN
3 Picture Mode
SCAN
FREEZE
H.LOCK
4 FREEZE
HDMI
P.MODE
S.MODE
SLEEP
Ⅰ/Ⅱ
ARC
FAVORITE
12
DISPLAY
SOURCE
14
RECALL
MUTE
16
VOL
18
CH
MENU
E MUTE
EXIT
19
20
F RECALL
21
OK
23
25
26
29
30
33
34
37
38
8
9
0
A
B
C
USB
BACK
REC
TIMESHIFT
PLAY/PAUSE
REV
FWD
PREV
TEXT
MIX
SUBCODE
HOLD
PIP
SWAP
MOVE
ZOOM
HELP
INDEX
NEXT
22
G VOL+ /-
24
H CH+/-
27
28
31
32
35
36
39
40
LED -LCD television Owner’s Manual
I MENU
J EXIT
THUMBSTICK (Up/
K Down/Left/Right/
OK)
L OK
M USB
N BACK
O REC
P TIMESHIFT
Q HELP
R PLAY/PAUSE
S REV
T FWD
U NEXT
V PREV
W TEXT
X MIX
Y HOLD
Z SUBCODE
[ PIP
\ SWAP
] ZOOM
` MOVE
Press to display the TV status information on the top of the TV screen.
Press this key to mute the sound, press it again to activate the sound. The sound
may be activated by turning the TV on again or increasing the volume .
Press this key to display the Special Function Menu (it functions when special
modules are inserted).
Used to adjust the volume when the screen menu is closed.
Used to select a TV channel when the screen options menu is closed, specifically,
press CH- to decrease the channel and press CH+ to increase the channel.
Press this key to display or exit the main menu.
Clears all on-screen displays and returns to TV viewing from any menu.
PAllows you to navigate the on-screen menus and adjust the system setting to
your preference. Press OK buuton to confirm the selection.
Press this key to confirm the selection
Press this key for quick switching of streaming media.
Back button(only for USB).
No available.
No available.
Fast Reverse (only for USB)
Fast Reverse (only for USB)
Fast Reverse(only for USB).
Fast Forward(only for USB).
Next(only for USB).
Previous(only for USB)
No available..
No available.
No available.
No available.
No available.
No available.
Fast Reverse(only for USB).
No available.
External Equipment Connections
External Equipment Connections
Antenna Connection
- Antenna or Cable Service without a Cable Box Connections.
- For optimum picture quality, adjust antenna direction if needed.
Note:
* It is recommended that you'd better use 75Ω coaxial cable to remove
the disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
„„ To improve picture quality in a poor signal area,
purchase and install a signal amplifier.
ANT.
„„ If the antenna needs to be split for two Tv’s, install a
"2-WaySignal Splitter" in the connections.
„„ If the antenna is not installed properly, contact your
dealer for assistance.
Note
RR All cables shown are not included with the TV.
LED -LCD television Owner’s Manual
9
External Equipment Connections
Choose Your Connection
DVD Setup
There are several ways to connect your television,
depending on the components you want to connect and
the quality of the signal you want to achieve. The following are examples of someways to connect
your TV. Choose the connection which is best for you.
How to connect
VCR Connection
AConnect the DVD video outputs (Y, Pb/Cb, Pr/Cr)
to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on
the TV and connect the DVD audio outputs to the
AUDIO jacks on the TV’ as shown in the figure.
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
DIGITAL OUT
(COAXIAL)
Y
DIGITAL OUT
(COAXIAL)
Y
Pb
Pr
PC/DVI AUDIO IN
Pb
Pr
PC/DVI AUDIO IN
HDMI IN
PC IN
HDMI IN
PC IN
How to use
ATurn on the DVD player, insert a DVD.
BUse the SOURCE button on the remote control,and
56
then press
/ button to to select COMPONENT
mode, press the
button to confirm.

CPress Play button on external equipment for
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
program play.
DRefer to the DVD player’s manual for operating
instructions.
Connection Option 2
AConnect the audio and video cables from the VCR’s
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
BInsert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
CSelect the input source with using the SOURCE button
56
on the remote control, and then press
/ button to
select the source, press the
button to confirm.

10 LED -LCD television Owner’s Manual
HDMI or DVI Setup
To watch digitally broadcast programs, purchase and
connect a digital set-top box.
How to connect
•• Use the TV’s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT
jacks, VGA or HDMI port for video connections,
depending on your set-top box connections
available. Then, make the corresponding audio
connections.
External Equipment Connections
How to use
ATurn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.)
BUse SOURCE on the remote contralto select PC or
change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture
is clear. If the refresh rate of the PC graphic card
can not be changed, change the PC graphic card or
consult the manufacturer of the PC graphic card.
HDMI (Y, Pb/Cb, Pr/Cr) mode.
CPress Play button on external equipment for
Y
Pb
Pr
DIGITAL OUT
(COAXIAL)
HDMI IN
PC/DVI AUDIO IN
PC IN
program play.­
DIGITAL OUT
(COAXIAL)
Y
Pb
HDMI IN
PC/DVI AUDIO IN
Pr
Note
RR Avoid keeping a fixed image on the TV’s screen for
along period of Time. The fixed image may become
permanently imprinted on the screen.
RR The synchronization input form for Horizontal and
Vertical frequencies is separate.
/
RR To obtain the best picture, do not play the USB,
YPbPr, HDMI or PC source at the same time.
PC Setup
How to connect
AUse the TV’s PC IN port for video connections.
BThen, make the corresponding audio connection. If
using a sound card, adjust the PC sound as required.
How to use
ATurn on the PC and the TV.
BTurn on the display by pressing the POWER button
on the TV’s remote control.
CUse SOURCE on the remote control to select PC source.
DCheck the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is
present, change the PC mode to another resolution,
LED -LCD television Owner’s Manual 11
External Equipment Connections / Basic Receiving and Playing Operations
Power source
Monitor Out Setup
The TV has a special signal output capability which
allows you to hook up a second TV or monitor.
Connect the second TV or monitor to the TV’s AV OUT.
See the Operating Manual of the second TV or monitor
for further details regarding that device’s input settings.
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on
AC. Insert the AC cord plug into a standard polarized AC
outlet.
Note
Note
RR Component, PC, HDMI input sources cannot be
used for Monitor out.
RR When connecting with external audio equipments,
such as amplifiers or speakers, please turn the TV
speakers off.
Connecting Headphones
You can connect a set of headphones to your set if you
wish to watch a TV program without disturbing the
other people in the room.
DIGITAL OUT
(COAXIAL)
RR Never connect the AC line cord plug to other than
the specified voltage. Use the attached power cord
only.
RR If the polarized AC cord does not fit into a non
polarized AC outlet, do not attempt to file or cut
the blade. It is the user’s responsibility to have an
electrician replace the obsolete outlet.
RR If you cause a static discharge when touching the
unit and the unit fails to function, simply unplug
the unit from the AC outlet and plug it back in. The
unit should return to normal operation. Polarized
AC Cord Plug.
HDMI IN
Plug a set of headphones
Into the 3.5mm mini-jack
socket on the rear panel
of the set.
Note
Basic Receiving and
Playing Operations
RR Prolonged use of headphones at a high volume
may damage your hearing.
Switching ON/OFF the TV set
RR You will not receive sound from the speakers when
you connect headphones to the system.
In the manual, the OSD (on screen display) may be
different from your TV’s because it is just an example to
help you with the TV operation.
12 LED -LCD television Owner’s Manual
Specification and Format
Switching ON/OFF the TV set
AFirst, connect power cord correctly and the power
source menu.
In case of no other operation, the signal source menu
will automatically disappear upon reaching the OSD
disappearance time preset in the main menu.
indicator will light.
SOURCE
BPress POWER on the remote control again.
CIf you want to exchange to standing by status,
TV
AV
Component
USB
PC
HDMI
please press down POWER on the remote control
DDisconnect the power supply or unplug the
television if it is intended to completely cease the
television performance.
MOVE
OK
OK
Choose the Menu Language
When you satisfied with your set for the first time,
you must select the language which will be used for
displaying menus and indications.
APress MENU and 3/4to select Function menu.
BPress 5/6button to select Function menu.
CSelect a particular language by pressingrepeatedly.
DWhen you satisfied with your choice, press MENU to
return to normal viewing.
Searching Channel
In this section, how to use the remote control to set
channel is explained. You can also use buttons on the TV
set to set channel.
Channel Edit
APress MENU on the remote control unit or MENU
on the TV’s front panel to display main menu,
and then press 3/4 to select Tuning menu.
BPress 5/6 to select the Channel Edit
Choose the Input source
option, and then press OK to enter submenu.
If the TV is not in TV mode, press SOURCE on the remote
control unit, and signal source menu will be displayed
on the TV screen (as shown in the below figure). Press
/
to select the TV option, and press
or OK
to confirm the switching to TV input terminal. After
switching, the signal source menu disappears, and at the
upper right corner of screen displays the information of
current signal source.
Pressing this key repeatedly can exit from the signal
56

LED -LCD television Owner’s Manual 13
Troubleshing and Specification
❖❖ Search
56
Press
/
to select the Search option, and finally
press 3/4to start manual search. Upon finding a
program, the search will automatically stop, and the
program will be stored onto the current channel.
You may stop the search by pressing OK or MENU.
❖❖ Fine Tune
56
Press
/
to select the Fine Tune option, and
then press 3/4 to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
Bpress 5/6 to select the Auto Search option, press
OK to enter the auto search menu, afterwards press
3/4 to select the Confirm option, and finally press
OK to confirm the starting of auto search.
menu
❖❖ Color system
56
Press
/
to select the Color Systems option,
and then press 3/4 to select correct color
system.
The TV is designed with three systems for your
choice, i.e. Auto, PAL , SECAM and NTSC. Generally,
the system is set as Auto and it is not necessary to
make an adjustment. The system is normally set as
Auto during auto search.
❖❖ Sound system
The TV is designed with four systems for your
choice, i.e. D/K, M, B/G and I. Generally, it is not
necessary to adjust the system. The system is
normally set as DK during auto search.
Sound
CDuring auto search, the scale value on the progress
bar is continually increasing, indicating the auto
search is in progress. After finishing the auto search,
the TV will play the channel starting the auto search.
To stop the search in halfway, just press MENU/OK,
and the TV will play the first searched channel.
menu
Auto Search
❖❖ Skip
Auto Searching
When the skip is set ON, the channel will be
skipped when pressing CH ∧ or CH ∨ and only can
be selected by pressing 0-9 numerical keys.
Found Channel(s):2
Frequency:25NHz
40%
Cancel
If you want to recover the skipped channel
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press3/4to set Skip as Off.
Tuning
Sound
Tuning
Exchange
Automatic search
APress MENU on the remote control unit or MENU on
APress MENU on the remote control to display main
menu, and then press 3/4 to select Tuning
BPress 5/6 to select the Prog. Exchange option,
menu. (Note: Only when Tuning Lock in the H. Lock
menu is Off can the Channel menu be selected.)
14 LED -LCD television Owner’s Manual
the TV’s front panel to display main menu, and then
press3/4to select Tuning menu.
and then press OK to enter its submenu.
CPress 5/6 to select the To Channel option, and
Specification and Format
then press 3/4 to set the found to be exchanged to.
menu
Prog. Exchange
Current Channel
To Channe
Exchange
Sound
10
20
OK
BIf you want to recover the sound, press MUTE
button again or directly press VOL+ button.
Quick program view
ASuppose that you previously watched a TV program
on Channel 8, but now you are watching a TV
program on Channel 18 (as shown in the below
figure).
Tuning
DAfter adjusting the current channel and the found to
56
be exchanged to, press
/
to move the cursor
to the Exchange option, and then press OK to start
exchange and exchange the program on current
channel to the channel you set for exchange.
Watching TV Program
You can watch TV program in a presetting channel.
How to select the desired program
AUsing Program number buttons
Directly enter the channel number with the numeric
keypad on the remote control. If to select channel
numbers of double-digital or three-figure, press
continuously the numeric buttons in three second.
BIf you want to return to Channel 8, just press "RECALL (Flashback)" once.
CIf you want to return to Channel 18 again, just press
"RECALL (Flashback)" once again.
Note
RR This function is only available in TV mode.
BUsing CH ∧ /CH ∨ buttons
Press CH∧ to select a channel number in number
increasing direction. Press CH ∨ to select a channel
number in number decreasing direction.
How to select the desired sound
Press VOL-/+ buttons on the remote or the front of
the TV set to adjust the volume level. The range is
0~100. When the volume buttons are pressed the
volume level is displayed automatically on the TV
screen.
Mute Setting
APress MUTE button on the remote control and a icon
will display on the screen. At this time, the sound of
the TV set is turned off.
Picture Control Functions
This means the adjustment of specific contents in the
picture, if already in normal condition, it is not necessary
to make any adjustment.
Due to different TV signal inputs, some items may need
to be adjusted. The following makes a description by
only taking TV signal as an example.
How to select the picture mode
APress MENU to display main menu on the screen, and
then press 3/4 to select the Picture menu, afterwards
5/6 to enter the option to be adjusted.
BPress 5/6 to move the cursor to the option to be
adjusted, and then press /
to select Standard/
press
Vivid/Soft/User.
34
You can also press P.MODE on the remote control to
LED -LCD television Owner’s Manual 15
Troubleshing and Specification
select Standard/Vivid/Soft/ User mode.
❖❖ Standard
The picture brightness and hue are moderate.
❖❖ Vivid
The picture is vivid, bright and dynamic.
❖❖ Soft
The picture is soft and in light color.
❖❖ User
The picture effect is set by yourself to your preference.
How to customize your own picture status
APress MENU to display main menu on the screen,
and then press 3/4 to select the Picture menu,
afterwards press
adjusted.
❖❖ Aspect Ratio
Select the mode of Aspect Ratio(Full screen/4:3/
Zoom/Cinema/Panorama).
❖❖ Palette:
56
56
Press
/
to select the Palette option, and then
press 4 to enter its submenu, and finally press
/
to select a toner pattern from six patterns (User,
Standard, 6500K, 7300K, 8500K and 9300K) to your color
preference. Normally, the Standard mode is selected.
If the User mode is selected, press 3/4 to enter
the palette menu, (as shown in the below figure),
and then press 3/4to select a benchmark in the
range of 2500K~15000K from warm color to cold
color, afterwards press
/
to adjust; if a different
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared.
56
menu
5/6 to enter the option to be
Palette
Standard
Warm1
Warm2
Cool1
Cool2
User
BPress 5/6 to move the cursor to the option to be
adjusted, and then press 3/4 to adjust it to your
+50
0
-50
desired effect.
Sound
menu
Contrast
Brightness
Color
Sharpness
Tint
Picture Mode
Aspect Ratio
Palette
Reset
Sound
OK
Standard
Full Screen
Standard
50
50
50
50
0
OK
Tuning
❖❖ Reset
Return to factory default settings.
Sound Control Functions
Tuning
❖❖ Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
❖❖ Brightness
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
❖❖ Color
This will adjust the saturation level of the colors to suit
your personal preference.
❖❖ Sharpness
This will adjust the sharpness of fine details in the picture.
❖❖ Tine
Allows you to select the color mix (Tine) of the picture.
❖❖ Picture Mode
Select the mode of picture(Standard/Vivid/Soft/User).
16 LED -LCD television Owner’s Manual
How to choose audio mode
APress MENU to display main menu on the screen,
and then press 3/4 to select the Sound menu,
afterwards press
adjusted.
5/6 to enter the option to be
BPress 5/6 to move the cursor to the option to
be adjusted, and then press 3/4 to select User/
Standard/Music/Theater mode.
❖❖ User
A spare setting that can be adjusted to personal tastes.
❖❖ Standard
Normal sound with moderate bass and treble setting.
❖❖ Music
Specification and Format
Designed the sound to best suit music programs.
❖❖ Theater
Enables extra bass and treble to enhance the movie
experience.
You can also press S.MODE button on the remote control
to select User / Standard / Music / Theater mode.
How to customize your own audio
status
APress MENU to display main menu on the screen,
and then press 3/4 to select the Audio icon,
afterwards press
adjusted.
5/6 to enter the option to be
BPress 3/4 to adjust.
menu
Digital tone
Standard
Music
Theater
User
+6db
0
-6db
Sound
50
75
100
300
1K
3K
5K
10K 15K
Tuning
❖❖ SRS TS XT
The surround sound feature expands the audio
listening field wider and deeper to create exceptional
sound quality from the TV’s speakers.
❖❖ AVL (Automatic Volume Limit)
menu
Volume
Balance
Digital tone
SRS TS XT
AVL
MAXX Bass
Reset
Sound
56
/
to adjust, if a different benchmark is selected
for adjustment, the original adjustment data will be
automatically cleared.
OK
Standard
Off
Off
Low
50
0
OK
Tuning
❖❖ Volume
Press 3/4 to adjust the volume of a TV program.
❖❖ Balance
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
The intermediate value is 0. When indication value
of Balance increases toward 50, sound of the right
and left speakers becomes stronger and weaker,
respectively. When indication value of Balance
decreases toward -50, sound of the right and left
speakers becomes weaker and stronger.
❖❖ Digital tone
This select the modes for sound reproduction dependent
on the broadcast signals or signals from external inputs
received.
Select the mode of sound (User/Standard/Music/Theater).
If the User mode is selected, press OK to enter the
digital tone menu,(as shown in the below figure),
and then press 3/4 to select a benchmark in the
range of 50~15K from bass to treble, afterwards press
This will reduces the differences in volume level
among broadcasters.
❖❖ MAXX Bass
To adjust the super bass. Press 3/4 to select super
bass off, low or high Medium.
❖❖ Reset
Return to factory default settings.
Timer Functions
Setting of Current Time
The current time is calculated from the moment upon
turning the TV on. At first, check whether the time
indicated on the TV's clock is consistent with the standard
time of your time zone; if not, adjust the clock as follows:
APress MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu,
and then press 3/4 to select the Timer menu,
afterwards press
/
to select the Current Time
option.
56
BPress3/4to set hour and minute.
CPress 5/6 to adjust the time.
DAfter finishing time setting, press OK or MENU to confirm.
LED -LCD television Owner’s Manual 17
Troubleshing and Specification
APress MENU on the remote control unit or MENU
menu
Curren Time
Off Time
On Time
On Channel
Remind Time
Remind Channel
10:30
--:---:-000
--:-000
on the TV's front panel to display the main menu,
and then press 3/4 to select the Timer menu,
afterwards press
/
to select the On Channel
option.
56
BPress 3/4to set the On Channel or OFF.
menu
Sound
Tuning
Setting of ON/OFF Time
Curren Time
Off Time
On Time
On Channel
Remind Time
Remind Channel
This function allows the TV to automatically turn on or
enter standby mode upon reaching the preset time.
Sound
10:30
00:00
00:00
0
00:00
0
Tuning
APress MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press 3/4 to select the Timer menu,
afterwards press
/
to select the On Time or Off
Time option.
56
BPress OK to enter the setting screen, and then press
5/6to select ON or OFF, if you select ON, press
3/4 to set hour and minute. ON indicates the On/
Off Time function is enabled while OFF indicates the
function is disabled.
menu
Curren Time
Off Time
On Time
On Channel
Remind Time
Remind Channel
Sound
On
00:00
--:-Off
0
00:00
0
Tuning
CAfter finishing time setting, press OK or MENU to confirm.
Setting of Remind Time and Remind
Channel
The remind time and remind channel functions allow the
TV to automatically enter the preset channel at preset
time. If the TV is AC off or forcible DC off, the preset time
will be cleared.
APress MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press 3/4 to select the Timer menu,
afterwards press
/
to select the Remind Time
option.
56
menu
Curren Time
Off Time
On Time
On Channel
Remind Time
Remind Channel
Note
RR After setting the On/Off Time function, if the TV
is AC off or forcible DC off, the function will be
automatically cleared.
Setting of On Channel
Sound
BPress OK
10:30
00:00
00:00
On
00:00
Off
Tuning
to enter the setting screen, and then press
5/6 to select ON or OFF, if you select ON, press
3/4 to set hour and minute, and then press
5/6 to adjust time.
CAfter finishing time setting, press OK or MENU to
confirm.
This function is used in combination with the On/Off Time
function. When the TV turns on upon reaching the On
time, it automatically enters the preset channel.
18 LED -LCD television Owner’s Manual
DPress 5/6 to select the Remind Channel option,
and press 3/4 to set the found.
Specification and Format
Function Menu
❖❖ Black Stretch
Adjust Menu
Function Menu Set
APress MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu, and
then press 3/4 to select the Time menu.
BPress 5/6 to select the option to be adjusted,
and then press 3/4 to adjust it.
The TV can be used as a display, and you may adjust
relevant settings. Press SOURCE to switch the signal
input to PC mode.
APress MENU to display the screen main menu, and
then press 3/4 to select the Adjust menu as
shown in the below figure.
❖❖ Language
menu
Two languages (i.e. Simplified Chinese and English)
are available for your choice.
Image Position
H-Size
V-Size
Auto Adjust
Clock
Phase
Reset
❖❖ Menu timeout
The option is for adjusting the menu display
time. Press 3/4 to set the desired time (5-15s).
Sound
5
5
128
0
Tuning
BPress 5/6 to select the option to be adjusted.
CPress 3/4 to adjust it.
❖❖ Image Position
This is used to adjusting H-Position and V-Position.
❖❖ H-Size
❖❖ Picture Optimize
56
56
•• Press / to select the Picture Optimize option.
•• Press 4 to enter the submenu.
/
to select theDCDI/DNR/3D Comb
•• Press
Filter to be adjusted, and then press 3/4 to
select ON or OFF.
/
to select the Color Management to
•• Press
be adjusted, and then press 3/4 to select Low/
Medium/High/ Off.
56
menu
Picture Optimize
DCDI
DNR
Color Management
3D Comb Filter
Sound
On
Low
On
On
Tuning
❖❖ Blackground
Press 3/4 to set ON or OFF, if you select ON, the TV
screen will be black if no signals are available.
❖❖ Vertical and Horizontal position of picture can be
adjusted in this item.
❖❖ V-Size
❖❖ Vertical and Horizontal position of picture can be
adjusted in this item.
❖❖ Auto Adjust
Vertical and Horizontal position of picture can be
adjusted in this item.
❖❖ Clock
This is used for adjusting the phase of pixel clock in
PC mode.
❖❖ Phase
This is used for adjusting H Position and V Position as
well as relative parameters in PC modes.
❖❖ Reset
Return to factory default settings.
LED -LCD television Owner’s Manual 19
Troubleshing and Specification
Lock Setup
Tuning Lock OFF or execute the Unlock option.)
The television has the function of security default lock.
Password needs to be entered when the program lock
mode is to be set.
How to use the password function
Press H. LOCK, the TV screen will display Enter Password
to prompt the user to enter a correct password by
pressing corresponding numerical keys; if the password
is correct, the user enters the Lock Set menu; if incorrect,
the user is required to enter a password again.
If there is no operation for a few seconds, the display will
automatically disappear.
The Lock Set menu is as follows:
Preset Source may be set as Off, TV, AV,Component,
HDMI, PC and USB. When the Preset Source is set as
TV, after entering the Preset Channel menu, press
3/4 to select the preset channel, and the channel
will be forcibly switched to the preset one upon
turning the TV on; when the Preset Source is set as
other signal sources, the TV will be forcibly switched to
the preset source upon turning on. For example, when
the Preset Source is set as YPbPr/YCbCr, the TV will be
switched to YPbPr/YCbCr upon turning on; when set as
OFF, the preset function will be closed.
❖❖ Preset Channel Setting
Only when the Preset Source is set as TV can the
Preset Channel option be available. Press 3/4 to
select preset channels from 0-254.
❖❖ Source Lock
menu
Change Password
Tuning Lock
Preset Source
Preset CH.
Source Lock
Child Lock
Max Volume
On Volume
Unlock
❖❖ Preset Source Setting
off
off
off
off
This function is used to prohibit watching a program
from various external inputs, e.g. AV and PC, etc.
Press
/
to select a certain option, and then
press 3/4 to set an external input lock ON or OFF.
If an external input lock is set ON, after entering this
mode, the screen will display blue background with
muting and a prompt Source Lock; during Source
Lock prompt, Source Lock will remain if there is no
other display on the screen. To watch a program
from a locked external input, just enter Source Lock
submenu to set corresponding status as OFF or
execute the Unlock option in the Lock Set menu.
56
100
0
❖❖ To set new password
56
After entering the Lock Set menu, press
/
to
select the Change Password option, and then press
3/4 to display the Change Password menu,
afterwards enter a new 4-digit password by pressing
numerical keys and repeat entering this password
once, and finally select the option to be confirmed
and press MENU to confirm, indicating the successful
change of password.
If the user does not want to change the password in
halfway, he may press MENU to exit from this menu.
Note
The initial password is 0000, and the password setting
will not be changed after executing the Unlock
option.
❖❖ Tuning Lock
56
Press
/
to select the Tuning Lock option, and
then press 3/4 to set ON or OFF.
(If set ON, the Tuning Menu is not available in TV
mode. To make any operation related to the Tuning
Menu, it is necessary to enter the Lock Set menu to set
20 LED -LCD television Owner’s Manual
❖❖ Child Lock Setting
56
Press
/
to select the Child Lock option, and then
press 3/4 to set ON or OFF. If set ON, this control
key will not respond, and the screen will display Child
Lock when the key is pressed; if no other operation is
made, the display will automatically disappear later.
To resume Child Lock function, just enter the Lock Set
menu to set Child Lock OFF or execute the Unlock
option.
❖❖ Max Volume Setting
56
Press
/
to select the Max Volume option, and
then press 3/4 to freely adjust the max volume
within the range of 0~100. After finishing the setting,
the max volume in the Volume menu will not exceed
the preset max volume; for example, if the preset
max volume is 30, the volume in the Volume menu
can not be increased any longer upon reaching 30;
if the preset max volume is less than the value in the
Volume menu, the latter will decrease along with the
decrease of preset max volume.
Specification and Format
❖❖ On Volume
56
Press
/
to select the Power on Volume option,
and then press 3/4 to freely adjust the volume
within the range of 0~100.
❖❖ Unlock Setting
56
Press
/
to select the Unlock option, and then
press 4 to clear all the lock settings, namely set all
the lock setting options as OFF; the Preset Channel
is set as OFF and max volume returns to 100 (except
password).
Streaming Media Playing
System
Note
RR The diagrams in the following section are
schematic and only for your reference. Please see
the actual product if necessary.
ASupported file formats:
•• Picture: *. JPEG;
•• Music: *. Mp3(8-320kbps; WMA(32-192kbps);
AAC(16-576kbps)
•• Movie:
MPEG4: *. avi files in accordance with Div*4. x/5. x
Protocol;
MPEG2: some *. mpeg files;
MPEG1: *. dat and some *. mpeg files;
RealVideo
•• Text: *. Txt.
Note
RR Due to the particularity of file coding, some files
may be unable to be read.
BSupported equipment: Support the equipment that supports Mass Storage
Protocol and whose file system is FAT/NTFS/FAT16/
FAT32, such as some USB disks, mobile hard disks,
card readers, MP3 players and digital cameras.
If USB equipment could not be identified due
to unsupported file system, please format the
equipment to the above-mentioned file system;
CThe external card reader supports most of the digital
cards in the current market; the types of digital cards
that can be read are relevant to the performance
of selected card reader; you may attach standard
mobile hard disks (working voltage 5.0V, working
current not higher than 500mA); during media
playing, do not pull out storage media, otherwise it
may cause system halt, damage the files in storage
media or damage USB equipment; sometimes, the
TV may halt due to overhigh information error rate,
in which case you should restart the system; there
are a lot of nonstandard USB mobile equipment
in the market, they may not be identified when
connected to the streaming media playing system;
the above phenomena may also occur on computers
and are not the TV’s fault.
DTo achieve smooth playing, ensure the following:
•• The file code rate should be lower than 300KB/S;
•• Due to the limitation of USB signal transmission
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
•• Use high-speed USB equipment in conformity
with USB2.0 Interface Standard; if USB equipment
in conformity with USB1.1 Interface Standard is
used, the playing may be unsmooth.
EAlthough many movie files are with such postfixes as
avi and mpeg, actually there are several formats in the
files; however, the TV can only play some files in avi
and mpeg formats. Some files with the postfix "dat"
are not movie files, but data files commonly used in
computers, and they can not be played as movies.
Start/Exit Streaming Media Playing
System
APress USB on the remote control unit to select the
streaming media function.
BInsert USB equipment into corresponding USB
interface 2s after starting the system.
CAfter entering the system menu, press 3/4 on
the remote control unit to select the required USB
equipment, and then press
/
on the remote
control unit to select the required file.
56
DPress OK to enter the selected file.
ETo exit the streaming media playing system and
watch a TV program, you must return to the
streaming media main menu at first (to protect
equipment), and then press SOURCE to select TV or
directly press USB to return to the TV mode.
LED -LCD television Owner’s Manual 21
Troubleshing and Specification
OK to enter the playing display interface.
•• Press ZOOM to magnify the picture, and then
T to move the picture.
press3/4/ /
•• Press 3/4 to select the last or next picture.
•• Press
/
to rotate the picture.
56
56
Operating Method of Streaming
Media Menu
APress 5/6 to scroll through main menu or
submenu and select your desired option.
BPress OK to confirm your selection.
CPress REV/FWD to achieve the FF (fast forward) and
FB (fast back) of the movie or music being played.
DPress PLAY/PAUSE to pause playing, and press it
again or press OK to continue playing.
EPress ZOOM to magnify pictures; in zoom mode,
press 3/4 and 5/6 to move the picture.
FPress HELP to display or exit the screen display
DTo exit playing, just press BACK repeatedly.
Playing a Movie
AAfter entering USB main interface, press 3/4 to
select a harddisk partition, and then press
select the "Movie" option.
5/6 to
information while playing.
GPress BACK to stop playing, or return to the previous
menu, and press BACK repeatedly to return to the
main menu.
Playing a Picture
BPress OK to confirm the selection and enter the
AAfter entering USB main interface, press 3/4 to
5/6 to
select a harddisk partition, and then press
select the Picture option.
movie playing interface.
CPress 3/4 to change page, and press 5/6 to
select the movie you want to play, and then press
OK to enter the playing display interface.
•• Press 3/4 to select the last or next movie.
BPress OK to confirm the selection and enter the
picture playing interface.
CPress 3/4 to change page, and press 5/6 to
select the picture you want to play, and then press
22 LED -LCD television Owner’s Manual
DTo exit playing, just press BACK repeatedly.
Specification and Format
Note
RR The menu display varies with the number and
names of files in your equipment.
Playing Music
AAfter entering USB main interface, press 3/4 to
select a harddisk partition, and then press
select the Music option.
5/6 to
DTo exit the Text mode, just press BACK repeatedly.
Settings
AAfter entering USB main interface, press 5/6to
select the Settings option.
BPress OK to confirm the selection and enter the
settings selection interface, and then press
to select the required options.
BPress OK to confirm the selection and enter the
5/6
music playing interface.
CPress 3/4 to change page, and press 5/6 to
select the music you want to play, and then press
OK to play the music.
❖❖ BGM Auto Play
Select "on" or "off".
DTo exit music playing, just press BACK repeatedly.
❖❖ Bubtitle Auto Play
Select "on" or "off".
Text
❖❖ Photo Slide Time
AAfter entering USB main interface, press 3/4 to
select a harddisk partition, and then press
select the Text option.
56
/
to
BPress OK to confirm the selection and enter the text
playing interface.
CPress 5/6/3/4 to select the text you want
to read, and then press OK to play the text reading
interface. Press 3/4 to change page, and press
BACK to exit the reading interface.
Set the scan speed of pictures to be scanned in slide
form.
There are three options (Short/Long). Press 3/4 to
select the desired option.
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and regular
LED -LCD television Owner’s Manual 23
Troubleshing and Specification
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug
the power cord before you begin any cleaning.
Failure of
remote
controller
Check to see if the remote controller
display receiving window are blocked
by other objects and if batteries are
properly loaded.
AHere’s a great way to keep the dust off your screen
No color,
weak color
or poor
picture
Designate the item of color from the
Picture menu and depress the volume
button; Keep the display and VCR
separate a reasonable space; Activate
some functions to store picture
brightness; Make sure that the display
and signal source are available and
turned on.
BMake sure the excess water is off the screen, and
Excessive
brightness
or darkness
Adjust brightness or contrast.
Picture
too big or
small
Adjust the setup of sizes.
One
speaker
failure
Balance the sound in the menu.
Slight
sound
from
display
It is a normal phenomenon.
Cleaning the Screen
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Troubleshooting
For the sake of time and cost, it is strongly
recommended that you checkout the problem by
yourself according to the instructions listed hereunder
before contacting the after-sales service for technical
assistance.
Problem
No
picture,
no sound
Problem
Good
picture,
no sound
Possible remedies
Turn onthe power supply; Properly
plug theTV setto the powersocket;
Check to see if the power cable of other
appliance is plugged in the TV set. Make
sure that the power cable of the TV set
is properly connected.
Possible remedies
Depress the volume button;
Check out theaudio frequency input signals.
Note
RR Do not leave the television with static picture in an
extended period as it may result in residual image
on your television screen.
Note
RR Production of the screen requires high and precision
technologies. However, there might be some
dank or bright (red, blue or green) spots, or some
anomalistic stripes or spots. This is not defect. If the
TV set is used in an area 2,400 meters above the sea
level where the air pressure is below 750hpa, the
picture on the screen maybe affected and a muffled
sound might be produced. These phenomena
might happen in the area 1,500 meters above the
sea level. This is resulted from difference between
air pressures inside and outside the display. This is
not a defect covered by the limited warranty.
Specification
Basic specification and parameter
24 LED -LCD television Owner’s Manual
Recommendatory HDTV/
SDTV(YPbPr/YCbCr) format
Power
~ 100-240V
Color System
PAL, NTSC, SECAM
Stand-by
Consumption
D/K, B/G, I, M
Video Input
USB,AV, Component, HDMI or PC,
Environmental
condition
Accessories
50/60Hz
Operating temperature range:
+5°C - +35°C Operating
humidity range: 20%-80%
Storage Temperature:
-15°C~+45°C
Storage Humidity: 5%-90%,
non-condensing
If the storage temperature is
lower than 0 °C, please first
lays the machine aside after
in the operating temperature
environment carries on restores
2 hours, then electrifies the use
again, protects your television
not to receive the damage.
Owner’s manual
Remote Control
Alkaline battery
x1
x1
x2
Sequence
Number
Format
Refresh
Frequency (Hz)
1
480i/480p
60
2
576i/576p
50
3
720p
50/60
4
1080i/1080p
50/60
Recommendation PC connection
input format
sequence
number
Format
H-Frequency
(KHz)
V-Frequency
(Hz)
1
640*480@60Hz
31.5
60
2
800*600@60Hz
37.88
60
3
1024*768@60Hz
(Recommendatory)
48.36
60
Recommendation DVI connection
input format
(This is only available for certain
models,please refer to actual products.)
Product main size (contain stand)
MODEL
Power
Consumption
Net Size(LxWxH)
Net Weight
LE19T3
30W
460x160x350mm
3.2Kg
LE19T3W
30W
460x160x350mm
3.2Kg
Sequence
Number
Resolution
Refresh Frequency (Hz)
1
640*480
60
2
800*600
60
3
1024*768
60
Recommendation HDMI
connection input format
LE22T3
35W
528x160x388mm
3.8Kg
LE22T3W
35W
528x160x388mm
3.8Kg
45W
572x170x413mm
4.2Kg
Sequence
Number
Format
Refresh Frequency (Hz)
LE24T3
L24K3
65W
585x190x434mm
5.3Kg
1
480i/480p
60
2
576i/576p
50
3
720p
50/60
4
1080i
50/60
Note
 Design and specifications are subject to
change without notice. The dimension
in this manual is a approximation.
Format
LED -LCD television Owner’s Manual
25

advertisement

Related manuals

advertisement