Haier LE42H330 Flat Panel Television Owner's Manual


Add to my manuals
35 Pages

advertisement

Haier LE42H330 Flat Panel Television Owner's Manual | Manualzz
OWNER’S MANUAL
LE42H330
LE46H330
LE55H330
LD42K3
LED-LCD TELEVISION
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Contents
Contents
3
Function Menu ...................................................18
Important Safety Instructions
4
Introduction
6
Adjust Menu .......................................................19
Time Menu..........................................................19
Lock Setup ..........................................................20
Warning
Function Menu Set ............................................................ 18
Panel Control ....................................................... 6
Connection Option .............................................. 7
Remote Control
8
Battery loading .................................................... 8
Precautions .......................................................... 8
Remote Control Function
9
Function introduction ......................................... 9
External Equipment Connections
10
Antenna Connection .........................................10
Choose Your Connection ...................................11
VCR Connection .................................................................. 11
External AV Source ............................................................. 11
Connecting a DVD player ................................................ 11
HDMI or DVI Setup ............................................................. 12
PC Setup ................................................................................ 12
Monitor Out Setup ............................................................. 13
Power source ......................................................13
Basic Receiving and Playing
Operations
14
Switching ON/OFF the TV set ...........................14
Switching ON/OFF the TV set ........................................ 14
Choose the Menu Language .......................................... 14
Choose the Input source ................................................. 14
Picture Menu .....................................................14
How to select the picture mode ................................... 14
How to customize your own picture status .............. 14
Sound Menu ................................................15
How to select the sound mode ..................................... 15
How to customize your own sound status................ 15
Channel Menu .............................................16
Programme Edit .................................................................. 16
Auto Tuning .......................................................................... 17
Exchange ............................................................................... 17
DTV Manu ............................................................................. 18
2
LED -LCD television Owner’s Manual
How to use the password function.............................. 20
Advanced function
21
To watch a 3D TV ................................................21
Streaming Media Playing System ....................22
Start/Exit Streaming Media Playing system.............. 23
Operating Method of Streaming Media Menu ........ 23
Playing a Picture ................................................................. 23
Playing a Movie ................................................................... 24
Playing Music ......................................................................... 24
Text .......................................................................................... 24
Settings ................................................................................... 25
Maintenance
25
Troubleshooting
25
Specification
26
Format
27
Warning
Warning
WARNING:
!
WARNING
RISK ELECTRIC SHOCK
DO NOT OPEN
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
* To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any
accessory inside the casing.
* lf necessary, please contact authorized after-sales services.
* A lighting flash mark in a triangle: A potentially hazardous situation, which, if not avoided, could result in
serious injury by high voltage.
* An exclamation mark in a triangle: Major part or accessory of which technical specifications must be followed if
it is to be replaced.
WARNING: To avoid fire or electric hazards, never place your television receiver in an area with heavy
moisture. Attention should be paid to avoid accidental scratches or impacts onto the screen.
CAUTION:
Please read this manual carefully before using your television and keep this manual in a
good place for future reference.
To achieve the best performance of your television, read this User’s Manual carefully and
properly store it for future reference.
Information of screen displays and figures in the User’s Manual may vary due to technical
innovations.
CAUTION:
Unauthorized disassembly of this product is prohibited.
LED -LCD television Owner’s Manual
3
Important Safety Instructions
Important Safety Instructions
4
LED -LCD television Owner’s Manual
Important Safety Instructions
LED -LCD television Owner’s Manual
5
Panel Control
Introduction
- This is a simplified representation of front panel.
- Here shown may be somewhat different from your TV.
Panel Control
LD42K3
LE42H330/LE46H330/LE55H330
1 TV/AV
2 VOL +/3 POWER
4 CH +/5 MENU
6
Press this key to open/close signal source
options menu.
Press to adjust the volume. In the MENU screen,
these buttons serve as right/left buttons.
Press to turn on and off the TV.
Press to scan through channels. To scan quickly
through channels, press and hold down either
+/- . In the MENU screen, these buttons serve
as up/down buttons.
Menu display. Press to access the on-screen
menu display.
LED -LCD television Owner’s Manual
Panel Control
Remote Control
Battery loading
1. Slide open the cover of the battery compartment on
the back of the remote controller.
2. Load two 7# (AAA) alkaline batteries in the
compartment, (plus and minus poles to respective mark)
3. Replace the cover of the battery compartment.
Precautions
As strong light may interfere the signals, change your
position to operate the remote controller if the television
cannot be turned on or off as you expect.
Keep the remote controller away from heat source or
humid area to ensure effective performance of the
remote controller.
8
LED -LCD television Owner’s Manual
Make sure that two AAA alkaline batteries are loaded.
The batteries must be of the same type. The batteries
must be located properly. The batteries are not
rechargeable.
Make sure that there is no obstacle between the remote
controller and television set.
Connection Options
Connection Options
Back panel connections
LD42K3
LE42H330/LE46H330/LE55H330
1
PC Video In
Connect a video cable from a computer to this
jack..
8 ANT In
Connect cable pr antenna signal to the TV, either
directly or through your cable box.
2
PC/DVI Audio
In
Connect the audio L/R cables from a computer
to this jack.
9 SPDIF
Digital Audio Optical output.
For the smart comtroller.
Component
Video In
Connect a component video device to these
jacks.
0 W/A
3
A USB jack
Connect a USB flash drive to view videos,images
or listen music.
4
Component
Audio In
Connect the audio L/R cables from the
component video signal source to these jacks.
B
Connect to the internet (No available).
5
HDMI1-3 In
Connect a HDMI device to receive digital audio
and uncompressed digital video.
C S-VIDEO IN
6
AV OUT
Connect the audio L/R and video cables to your
other video equipment.
D Headphone
7
AV1 In
Connect the video signal from a video device.
LAN
Connect the S-VIDEO cable from an external signal
source to this jack.
Headphone audio output terminal.
LED -LCD television Owner’s Manual
7
Remote Control Function
Remote Control Function
- The remote control cannot be operated unless the batteries are properly loaded.
- When using the remote control, aim it at the remote control sensor on the TV.
Function introduction
1 POWER
2
3
4
5
USB
H. LOCK
SOURCE
DSMB
6 STILL
7 ARC
8 MUTE
9 0-9
0 Q. VIEW
A VOL+ /B CH+/C Sound Mode
D Picture Mode
E TV.MENU
F D.MENU
THUMBSTICK (Up/
Down/Left/Right)
H OK
I EXIT
G
J USB
K
L
M
N
O
P
Q
R
S
T
U
V
W
X
Y
Z
[
\
TV.CALL
TIMESHIFT
VOD
AUDIO
PAGE+
GUIDE
TV/FM
INFO
PAGECH.LIST
FAV
STOCK
SLEEP
INTERACTION
Fn
DDS
BUSINESS
GAME
Press this key to start TV from standby mode, press it again to return to standby
mode.
Press this key for quick switching of streaming media.
Refer to the Functional Description on Page 20.
Press this key to open/close signal source options menu.
Press this key for quick switching of MO-Car.
Press this key to freeze the image. Press it again to return to normal screen. (Note:
Do not display a still picture for a long time to prevent the screen from burns.).
Press this key to select the screen display proportion.
Press this key to mute the sound, press it again to activate the sound. The sound
may be activated by turning the TV on again or increasing the volume.
These keys are used to select a channel.
Press this key to return to the previous TV program(only work in the TV mode).
Used to adjust the volume when the screen menu is closed.
Used to select a TV channel when the screen options menu is closed, specifically,
press P˜to decrease the channel and press P™to increase the channel..
Press this key continuously to select the sound mode.
Press this key continuously to select the picture mode.
Press this key to display or exit the main menu.
Press this key to display the Special Function Menu (it functions when special
modules are inserted).
Allows you to navigate the on-screen menus and adjust the system settings to
your preference.
Press this key to confirm the selection.
Clears all on-screen displays and returns to TV viewing from any menu.
Control the USB System.
Backward Forward
Play/Pause BACK: Back REC: no available
ZOOM: Press to magnify/minify an image D.CALL: Press to display program
information.
Display on/off.
No available.
No available.
No available.
No available.
No available.
No available.
No available.
No available.
No available.
Press this key to display the favorite program list menu.
No available.
Displaying the sleep time.
No available.
No available.
No available.
No available.
No available.
LED -LCD television Owner’s Manual
9
External Equipment Connections
External Equipment Connections
Antenna Connection
- Antenna or Cable Service without a Cable Box Connections.
- For optimum picture quality, adjust antenna direction if needed.
Note:
* It is recommended that you'd better use 757 coaxial cable to remove
the disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
To improve picture quality in a poor signal area,
purchase and install a signal amplifier.
If the antenna needs to be split for two Tv’s, install a
"2-WaySignal Splitter" in the connections.
If the antenna is not installed properly, contact your
dealer for assistance.
ANT.
Note
❏ All cables shown are not included with the TV.
10 LED -LCD television Owner’s Manual
External Equipment Connections
select the source, press the OK button to confirm.
Choose Your Connection
There are several ways to connect your television,
depending on the components you want to connect
and the quality of the signal you want to achieve. The
following are examples of someways to connect your TV.
Take LE42H330 as an example, Choose the connection
which is best for you.
VCR Connection
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Connection Option 2
A
B
C
Connect the audio and video cables from the VCR’s
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
Insert a video tape into the VCR and press PLAY on
the VCR. (Refer to the VCR owner’s manual.)
Select the input source with using the SOURCE button
on the remote control, and then press /button to
External AV Source Setup
How to connect
• Connect the audio and video cables from the
external equipment’s output jacks to the TV input
jacks, as shown in the figure.
• When connecting the TV to external equipment,
match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
How to use
A
B
C
D
Select the input source with using the SOURCE
button on the remote control.
Press / button to select the desired source.
Press OK button to confirm.
Operate the corresponding external equipment.
Connecting a DVD player
How to connect
A
Connect the DVD video outputs (Y, Pb/Cb, Pr/Cr)
to the COMPONENT (Y, Pb/Cb, Pr/Cr) input jacks on
the TV and connect the DVD audio outputs to the
LED -LCD television Owner’s Manual
11
External Equipment Connections
AUDIO jacks on the TV’ as shown in the figure.
C
Press Play button on external equipment for
program play.
/
How to use
A
B
C
D
Turn on the DVD player, insert a DVD.
Use the SOURCE button on the remote control,and
then press /button to to select COMPONENT
mode, press the OK button to confirm.
PC Setup
Press Play button on external equipment for
program play.
How to connect
Refer to the DVD player’s manual for operating
instructions.
A
B
Use the TV’s PC IN port for video connections.
Then, make the corresponding audio connection. If
using a sound card, adjust the PC sound as required.
HDMI or DVI Setup
How to use
To watch digitally broadcast programs, purchase and
connect a digital set-top box.
A
B
How to connect
• Use the TV’s COMPONENT (Y, Pb/Cb, Pr/Cr) INPUT
jacks, VGA or HDMI port for video connections,
depending on your set-top box connections
available. Then, make the corresponding audio
connections.
How to use
A
B
Turn on the digital set-top box.
(Refer to the owner’s manual for the digital set-top box.)
Use SOURCE on the remote contralto select PC or
HDMI (Y, Pb/Cb, Pr/Cr) mode.
12 LED -LCD television Owner’s Manual
C
D
Turn on the PC and the TV.
Turn on the display by pressing the POWER button
on the TV’s remote control.
Use SOURCE on the remote control to select PC source.
Check the image on your TV. There may be noise
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is
present, change the PC mode to another resolution,
change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture
is clear. If the refresh rate of the PC graphic card
can not be changed, change the PC graphic card or
consult the manufacturer of the PC graphic card.
External Equipment Connections
Note
❏ Component, PC, HDMI input sources cannot be
used for Monitor out.
❏ When connecting with external audio equipments,
such as amplifiers or speakers, please turn the TV
speakers off.
Power source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on
AC. Insert the AC cord plug into a standard polarized AC
outlet.
Note
❏ Avoid keeping a fixed image on the TV’s screen for
along period of Time. The fixed image may become
permanently imprinted on the screen.
❏ The synchronization input form for Horizontal and
Vertical frequencies is separate.
❏ To obtain the best picture, do not play the USB,
YPbPr, HDMI or PC source at the same time.
Monitor Out Setup
The TV has a special signal output capability which
allows you to hook up a second TV or monitor.
Connect the second TV or monitor to the TV’s AV OUT
by the tie line. See the Operating Manual of the second
TV or monitor for further details regarding that device’s
input settings.
Note
❏ Never connect the AC line cord plug to other than
the specified voltage. Use the attached power cord
only.
❏ If the polarized AC cord does not fit into a non
polarized AC outlet, do not attempt to file or cut
the blade. It is the user’s responsibility to have an
electrician replace the obsolete outlet.
❏ If you cause a static discharge when touching the
unit and the unit fails to function, simply unplug
the unit from the AC outlet and plug it back in. The
unit should return to normal operation. Polarized
AC Cord Plug.
LED -LCD television Owner’s Manual
13
Basic Receiving and Playing Operations
Basic Receiving and
Playing Operations
Playing Operations
Choose the Input source
Change the picture source so you can watch your TV,
VCR, Cable , or any other devices that are connected to
your TV.
A
Switching ON/OFF the TV set
In the manual, the OSD (on screen display) may be
different from your TV’s because it is just an example to
help you with the TV operation.
Switching ON/OFF the TV set
A
B
C
D
First, connect power cord correctly and the power
indicator will light.
Press POWER on the remote control again.
B
Press SOURCE button to enter the Input Source
menu and then use / button to select the
desired items (ATV/DTV, AV1, AV2, Component, PC,
HDMI1, HDMI2, HDMI3).
Press OK button to confirm .
Picture Menu
The TV menu gives you an overview of the menus you
can select.
If you want to exchange to standing by status,
please press down POWER on the remote control
Note
❏ Depending on the input signal, one or more menu
items may not be selectable.
Disconnect the power supply or unplug the
television if it is intended to completely cease the
television performance.
How to select picture mode
Choose the Menu Language
The picture mode provides the pre-defined images
settings: Standard, Mild, User, Dynamic and EyeGuard .
When you adjust your set for the first time, you must
select the language which will be used for displaying
menus and indications.
A
B
C
D
Press MENU and
/to select Function menu.
press
button on the remote control to select the
picture mode repeatly. Standard, Mild, User, Dynamic
and EyeGuard.
Press /button to select language option and
then press OK to confirm.
Select a particular language by pressing/
repeatedly.
When you satisfied with your choice, press MENU to
return to normal viewing.
How to customize your own picture status
A
Press MENU button and then use
select Picture menu.
Back light LED Four...
Surround
Prog...
B
Press / button to select the desired items.,
press OK to enter its submenu.
C
Press/button to adjust the setting.
DTV Manu...
Intelligent
Mode
Chinese
14 LED -LCD television Owner’s Manual
Net
Upgrade
/button to
Basic Receiving and Playing Operations
Back light
range of 2500K~15000K from warm color to cold
color, afterwards press
/
to adjust; if a different
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared.
LED
Four_DIM
Contrast
Prog...
Brightness
Color
Sharpness
Tint
Back light
AVL
MAXX Bass Reset
DSM
Background OPC
LED
Palette
Four_DIM
Reset
DTV Manu.
Picture
Intelligent
Mode
Sound
Cool2
Volume
Balance
Digital+50 SRS
Cool1
Channel Programe.
Auto Tun.
Standard
Warm1
Menu Time
Function Language
User
Contrast
Timer
Current..
0
Picture
Optimize
MEMC
Horizont
Wertical.
Auto..
Off Time
Off Time On Channel Remind T.. Remind C..
out
Warm2
Adjust Image Po..
Exchange
-50
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
MENU %$&.
Phase
Eye Guard
Mode
Reset
Reset
029(
OK
2.
Reset
Brightness
This will adjust the light output of the complete
picture, which will mainly affect the darker areas of
the picture.
Clock
Press /to select OK or Cancel..
Sound menu
Color
This will adjust the saturation level of the colors to suit
your personal preference.
Sharpness
This will adjust the sharpness of fine details in the
picture.
How to select sound mode
A
Press MENU button and then use
select Sound menu.
B
Note
/button to
Press OK button and then use/button to
select Digital tone Mode.
❏ The picture options can only be adjusted in the
User mode. The other picture modes are preset.
Back light LED Four.
Tint
Allows you to select the color mix (Tint) of the picture.
Prog... DTV Manu.
Intelligent
Mode
Back light
Net
Upgrade
Press/button to adjust the Backlight.
LED Four_DIM
Select the LED Fore-drive_DIM Demo or LED Foredrive_DIM Calibration, Press OK to set.(It's not
availabe for LD42K3)
C
• You can also press S.MODE button on the remote
control repeatly to select the sound mode you
want. Standard, Music, Movie and User.
Palette:
Press / to select the Palette option, and then
press OK to enter its submenu, and finally press
/
to select a toner pattern from six patterns
(Cool2, Cool1, Standard, Warm1, Warm2, User) to your
color preference. Normally, the Standard mode is
selected.
If the User mode is selected, press / to enter
the palette menu, (as shown in the below figure),
and then press /to select a benchmark in the
Press / button to select the option Standard,
Music, Movie and User.
How to Customize your own sound
status
A
/button to
Press MENU button and then use
select Sound menu.
LED -LCD television Owner’s Manual
15
Basic Receiving and Playing Operations
B
Press / button to select the desired items,
Return to factory default settings.
press OK to enter its submenu.
C
Press/button to adjust the setting.
Channel menu
Press / to adjust the volume of TV set.
Display channel menu by pressing SOURCE button then
use /button to select the source of ATV or DTV
item.
Balance
A
Volume
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
B
The intermediate value is 0. When indication value of
balance is greater than 0,sound of the right is stronger
than the left. when indication value of balance is less
than 0,the left sound is stronger than the right sound.
Press MENU button and then use
select Channel menu.
Press / button to select the desired items,
press OK to enter its submenu.
Back light LED Four...
Digital tone
Prog...
This select the modes for sound reproduction dependent
on the broadcast signals or signals from external inputs
received.
Select the mode of sound (User/Standard/Music/Movie).
If the User mode is selected, press / to select
a benchmark in the range of 50~15K from bass to
treble, afterwards press
/
to adjust, if a different
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared.
/button to
DTV Manu...
Intelligent
Mode
Net
Upgrade
Programme Edit
Back light LED Four..
You can add a label to a channel to make it easier to find.
A
Press MENU button and then use
select Channel menu.
/ button to
Manual Search
Surroud
The surround sound feature expands the audio
listening field wider and deeper to create exceptional
sound quality from the TV’s speakers.
AVL (Automatic Volume Limit)
This will reduces the differences in volume level
among broadcasters.
MAXX Bass
To adjust the super bass. Press / to select super
bass off, low , high or Medium.
Reset
16 LED -LCD television Owner’s Manual
Press
/
to select the Search option, and finally
press /to start manual search. Upon finding a
program, the search will automatically stop, and the
program will be stored onto the current channel.
You may stop the search by pressing OK or MENU.
Fine Tune
Press
/
to select the Fine Tune option, and
then press / to start UP or DOWN fine tuning
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
Basic Receiving and Playing Operations
screen.
Back light LED Four...
Intelligent
Mode
Net
Upgrade
Color system
Press
/
to select the Color Systems option,
and then press / to select correct color
system.
The TV is designed with three systems for your
choice, i.e. Auto, PAL , SECAM and NTSC. Generally,
the system is set as Auto and it is not necessary to
make an adjustment. The system is normally set as
Auto during auto search.
All channels now available will be automatically preset in
order .After the search has finished, the first program
Sound system
The channels found are automatically saved.
The TV is designed with four systems for your
choice, i.e. DK, M, BG and I. Generally, it is not
necessary to adjust the system. The system is
normally set as BG during auto search.
Prog. Exchange
Skip
number will display on the screen. This search
automatically adds only the active channels in your area
to the TV's memory.
It deletes any channels on which there is no broadcast or
a poor signal.
A
When the skip is set ON, the channel will be
skipped when pressing CH˜ or CH ™ and only can
be selected by pressing 0-9 numerical keys.
B
If you want to recover the skipped channel
C
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press/to set Skip as Off.
Press MENU on the remote control unit or MENU on
the TV’s front panel to display main menu, and then
press / to select Channel menu.
Press / to select the Prog. Exchange option,
and then press OK to enter its submenu.
Press
/
to select the To Channel option, and
then press / to set the found to be exchanged to.
Auto Tuning
A
/button to
Press MENU button and then use
select Channel menu.
B
Press / button to select Auto Tuning, then
press OK to enter its submenu.
C
Press/button to select OK, press OK button
to start to scan. Press MENU button to return to the
previous menu, press EXIT button to EXIT the menu
D
After adjusting the current channel and the found to
be exchanged to, press
/
to move the cursor
to the Exchange option, and then press OK to start
exchange and exchange the program on current
channel to the channel you set for exchange.
LED -LCD television Owner’s Manual
17
Basic Receiving and Playing Operations
MEMC
Function Menu
Press / to set ON, Demo1,Demo2 or OFF, the
moving picture will be better when MEMC is on
function.
Function Menu Set
A
B
DSM
Press MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu, and
then press
/
to select the Function menu.
Press / to select the option to be adjusted,
and then press / to adjust it.
Language
Two languages (i.e. Simplified Chinese and English)
are available for your choice.
Press / to select DEMO OFF, DEMO1,DEMO2,
DEMO3.
Intelligent Mode
Press / to set ON /OFF/Demo, if you select ON,
the TV set will be in the intelligent mode, if there is
no one in front of the TV for about 20 minutes, the
TV power saving state, 10 minutes latter, the TV set
automatically stand by, When people return in front
of the TV, the TV set automatically turn.(This function
is not available for LD42K3)
Back light LED Four...
OPC
Surround
Prog...
DTV Manu...
Intelligent
Mode
Net
Upgrade
Chinese
• Press/to select the OPC , then press / to
select Uesr/Dynamic/Daylight/ Normnal/Night.
• Press / to select the Adjust , then press /
to set 0-10.
/
to select theDynamic Contral to be
• Press
adjusted, and then press / to select ON or
OFF.
Picture Contrast
Sound
Menu Timeout
The option is for adjusting the menu display time.
Press / to set the desired time (5-30s).
Picture Optimize
• Press / to select the Picture Optimize option.
• Press OK to enter the submenu.
/
to select theDCDI/Color
• Press
Management /Background to be adjusted, and
then press / to select ON or OFF.
/
to select the DNR to be adjusted,
• Press
and then press / to select Low/Middle/
High/ Off.
Note The Background function is not available for LD42K3.
Volume
Brightness
Balance
Color
Sharpness
Digital
SRS
<
User
<
10
>
Dynamic Control
<
Off
Language
>
Auto Tun
Menu Time Picture
Optimize
out
MEMC
Horizont Wertical.
Auto..
Palette
DSM
>
Background OPC
Eye Guard
Net
Upgrade
Mode
Function
Adjust
Image Po..
Timer Current..
Off Time
Clock
Phase
Reset
Off Time On Channel Remind T.. Remind C..
MENU %$&.
OK 2.
029(
Eye guard Mode
• Press/to select the Eye guard Mode option.
• Press OK to enter the submenu.
• Press / to select the Power E.G.Mode , then press
/ to select Standard/Eye Guard/Curtain.
/
to select the Change Ch.E.GI/
• Press
Watching E.G/Watching E.G.Delay to be adjusted,
and then press / to select ON or OFF.
Picture Contrast
Sound
Volume
Brightness
Color
Balance
Digital
Sharpness
Language
Auto Tun.
Back light LED Four...
Tint
Eye
SRS Guard
AVLMode
MAXX Bass
PowerOn E.G.Mode
Channel Programe.
<
Change Ch.E.G
Exchange
<
Watching E.G
<
MEMC
Menu Time Picture
Watching
OptimizeE.G.Delay
out
<
Standard
>
On
>
Off
>
Off
>
DSM
Palette
Adjust
Image Po..
Timer Current..
Horizont Wertical.
Off Time
Auto..
Clock
Background OPC
Phase
Eye Guard
Net
Upgrade
Mode
Reset
Off Time On Channel Remind T.. Remind C..
MENU %$&.
Reset
Reset
Function
18 LED -LCD television Owner’s Manual
Reset
MAXX Bass Reset
Adjust
OPC Mode
Channel Programe.
Back light LED Four...
Tint
OPCAVL
029(
OK 2.
Basic Receiving and Playing Operations
Net Upgrade
Time Menu
Press / to select OK or Cancel to upgrade the TV
set by internet and flash.
A
Adjust Menu
B
Press MENU button and then use
select Time menu.
/button to
Press
/
to select the desired option, press OK
to enter its submenu.
The TV can be used as a display, and you may adjust
relevant settings. Press SOURCE to switch the signal
input to PC mode.
A
Press MENU to display the screen main menu, and
then press
/
to select the Adjust menu as
shown in the below figure.
˖ Current Time: The current time is calculated from the
moment upon turning the TV on. At first, check whether
the time indicated on the TV's clock is consistent with the
standard time of your time zone; if not, adjust the clock as
follows:
B
C
Press / to select the option to be adjusted.
Press / to adjust it.
Image Position
This is used to adjusting H-Position and V-Position.
Horizontal-Size
Press / to adjust it(0---100).
• Press MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu,
and then press
/
to select the Timer menu,
afterwards press / to select the Current Time
option, press OK to enter the submenu.
• Press/to set hour and minute.
• Press
/
to adjust the time.
• After finishing time setting, press OK or MENU to
confirm.
Vertical-Size
Press / to adjust it(0---100).
Auto Adjust
Vertical and Horizontal position of picture can be
adjusted in this item.
Clock
This is used for adjusting the phase of pixel clock in PC
mode.
Phase
This is used for adjusting H Position and V Position as
well as relative parameters in PC modes.
Reset
Return to factory default settings.
Off Time/On Time: Set a time for the TV to
turn off or on.This function allows the TV to
automatically turn on or enter standby mode
upon reaching the preset time.
• Press OK to enter the setting screen, and then
press
/ to select ON or OFF, if you select ON,
press / to set hour and minute. ON indicates
the On/Off Time function is enabled while OFF
indicates the function is disabled.
• .After finishing time setting, press OK or MENU to
confirm.
Note
After setting the On/Off Time function, if the TV is AC
off or forcible DC off, the function will be automatically
LED -LCD television Owner’s Manual
19
Basic Receiving and Playing Operations
cleared.
Lock Set
On channel: This function is used in combination with
the On/Off Time function. When the TV turns on upon
reaching the On time, it automatically enters the preset
channel.
Change Password
• Press OK first and then press/to set the On
Channel or OFF.
Remind Time/Remind channel: The remind time and
remind channel functions allow the TV to automatically
enter the preset channel at preset time. If the TV is AC off
or forcible DC off, the preset time will be cleared.
• Press MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press
/
to select the Timer menu,
afterwards press / to select the Remind
Time option.
• Press OK to enter the setting screen, and then
press
/
to select ON or OFF, if you select ON,
press / to set hour and minute, and then
press
/
to adjust time.
• After finishing time setting, press OK or MENU to
confirm
• Press / to select the Remind Channel
option, and press OK first and then press/
to set the found.
Lock Setup
The television has the function of security default lock.
Password needs to be entered when the program lock
mode is to be set.
How to use the password function
Press H. LOCK, the TV screen will display Enter Password
to prompt the user to enter password by pressing
corresponding numerical keys; if the password is correct,
the user enters the Lock Set menu; if incorrect, the user is
required to enter a password again.
If there is no operation for a few seconds, the display will
automatically disappear.
The Lock Set menu is as follows:
OK
Tuning Lock
off
Preset Source
off
Preset Prog
off
Source Lock
OK
Child Lock
off
Max Volume
100
Power On Volume
off
Unlock
OK
Change Password
After entering the Lock Set menu, press
/
to
select the Change Password option, and then press
OK to display the Change Password menu, afterwards
enter a new 4-digit password by pressing numerical
keys and repeat entering this password once again.
If the user does not want to change the password in
halfway, he may press MENU to exit from this menu.
Note
The initial password is 0000, and the password setting
will not be changed after executing the Unlock
option.
Tuning Lock
Press
/
to select the Tuning Lock option, and
then press / to set ON or OFF.
(If set ON, the Tuning Menu is not available in TV
mode. To make any operation related to the Tuning
Menu, it need to enter the Lock Set menu to set
Tuning Lock OFF or execute the Unlock option.)
Preset Source Setting
Preset Source may be set as Off, TV, AV,Component,
HDMI, PC and USB. When the Preset Source is set as
TV, after entering the Preset Channel menu, press
/ to select the preset channel, and the channel
will be forcibly switched to the preset one upon
turning the TV on; when the Preset Source is set as
other signal sources, the TV will be forcibly switched to
the preset source upon turning on. For example, when
the Preset Source is set as YPbPr/YCbCr, the TV will be
switched to YPbPr/YCbCr upon turning on; when set as
OFF, the preset function will be closed.
Preset Prog
Only when the Preset Source is set as TV can the
Preset Channel option be available. Press / to
select preset channels from 0-255.
20 LED -LCD television Owner’s Manual
Basic Receiving and Playing Operations
Source Lock
This function is used to prohibit watching a program
from various external inputs, e.g. AV and PC, etc. Press
/
to select a certain option, and then press OK
to enter the submenu, press / to set an external
input lock ON or OFF. If an external input lock is set
ON, after entering this mode, the screen will display
blue background with muting and a prompt Source
Lock; during Source Lock prompt, Source Lock will
remain if there is no other display on the screen. To
watch a program from a locked external input, just
enter Source Lock submenu to set corresponding
status as OFF or execute the Unlock option in the Lock
Set menu.
To watch a 3D TV
If the TV is currently in the 2D
mode:
Stand-by switch
Child Lock Setting
Press
/
to select the Child Lock option, and then
press / to set ON or OFF. If set ON, this control
key will not respond, and the screen will display Child
Lock when the key is pressed; if no other operation is
made, the display will automatically disappear later.
To resume Child Lock function, just enter the Lock Set
menu to set Child Lock OFF or execute the Unlock
option.
Max Volume Setting
Press
/
to select the Max Volume option, and
then press / to freely adjust the max volume
within the range of 0~100. After finishing the setting,
the max volume in the Volume menu will not exceed
the preset max volume; for example, if the preset
max volume is 30, the volume in the Volume menu
can not be increased any longer upon reaching 30;
if the preset max volume is less than the value in the
Volume menu, the latter will decrease along with the
decrease of preset max volume.
3D switch key
Power on Volume
Press
/
to select the Power on Volume option,
and then press / to freely adjust the volume
within the range of 0~100.
Unlock Setting
Press
/
to select the Unlock option, and then
press OK to clear all the lock settings, namely set all
the lock setting options as OFF; the Preset Channel
is set as OFF and max volume returns to 100 (except
password).
A
Press the 3D switch key on the remote control
to call out the prompt menu. (See Fig. 1 below)
Advanced function
LED -LCD television Owner’s Manual
21
Basic Receiving and Playing Operations
Streaming Media Playing
System
Note
B
Press / to select the “Confirm” option, you will
enter the interface for selecting a corresponding 3D
mode. (See Fig. 2 below)
❏ The diagrams in the following section are
schematic and only for your reference. Please see
the actual product if necessary.
A
• Picture: *. JPEG; PNG; BMP;
• Music: *. Mp3(8-320kbps; WMA(32-192kbps);
AAC(16-576kbps)
• Movie:
MPEG4: *. avi files in accordance with Div*4. x/5. x
Protocol;
MPEG2: some *. mpeg files;
MPEG1: *. dat and some *. mpeg files;
RealVideo
• Text: *. Txt.
If the TV is currently in the 3D
mode:
A
B
Note
❏ Due to the particularity of file coding, some files
may be unable to be read.
Press the 3D switch key on the remote control to call
out the prompt menu. (See Fig. 3 below)
Press /keys to exit the 3D mode or cancel the
exit.
B
Note
❏ When you watch a 3D TV program, please wear
and turn on 3D glasses.
❏ If the signal currently detected in the HDMI
channel is one of 3D signals specified in the
Specification HDMI1.4a, selecting the “Confirm”
option will make the TV directly switch to a
corresponding 3D mode, so the above Fig. 2 will
not appear and you needn’t choose a 3D mode.
C
❏ In the 3D mode, the TV screen display menu can
still be called out and displayed normally.
❏ The TV doesn’t memorize the setting of 3D mode,
so it will be in the 2D mode when you turn it on
again after turning it off.
❏ In the USB mode, there are various modes of 3D
video sources. With USB signals, the 3D switch key
functions only when playing a video (film). The TV
will exit the 3D mode when playing ends or when
you manually exit the 3D mode.
Advanced function
22 LED -LCD television Owner’s Manual
Supported file formats:
D
Supported equipment:
Support the equipment that supports Mass Storage
Protocol and whose file system is FAT/NTFS/FAT16/
FAT32, such as some USB disks, mobile hard disks,
card readers, MP3 players and digital cameras.
If USB equipment could not be identified due
to unsupported file system, please format the
equipment to the above-mentioned file system;
The external card reader supports most of the digital
cards in the current market; the types of digital cards
that can be read are relevant to the performance
of selected card reader; you may attach standard
mobile hard disks (working voltage 5.0V, working
current not higher than 500mA); during media
playing, do not pull out storage media, otherwise it
may cause system halt, damage the files in storage
media or damage USB equipment; sometimes, the
TV may halt due to overhigh information error rate,
in which case you should restart the system; there
are a lot of nonstandard USB mobile equipment
in the market, they may not be identified when
connected to the streaming media playing system;
the above phenomena may also occur on computers
and are not the TV’s fault.
To achieve smooth playing, ensure the following:
Basic Receiving and Playing Operations
• The file code rate should be lower than 300KB/S;
• Due to the limitation of USB signal transmission
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
• Use high-speed USB equipment in conformity
with USB2.0 Interface Standard; if USB equipment
in conformity with USB1.1 Interface Standard is
used, the playing may be unsmooth.
E
Although many movie files are with such postfixes as
avi and mpeg, actually there are several formats in the
files; however, the TV can only play some files in avi
and mpeg formats. Some files with the postfix "dat"
are not movie files, but data files commonly used in
computers, and they can not be played as movies.
Start/Exit Streaming Media Playing
System
A
B
C
Press USB on the remote control unit to select the
streaming media function. press /to select
zmplayer, press OK to enter.
Operating Method of Streaming
Media Menu
A
B
C
D
Insert USB equipment into corresponding USB
interface 2s after starting the system.
E
After entering the system menu, press / on
the remote control unit to select the required USB
equipment, and then press
/
on the remote
control unit to select the required file.
F
G
Press
/
to scroll through main menu or
submenu and select your desired option.
Press OK to confirm your selection.
Press REV/FWD to achieve the FF (fast forward) and
FB (fast back) of the movie or music being played.
Press PLAY/PAUSE to pause playing, and press it
again or press OK to continue playing.
Press ZOOM to magnify pictures; in zoom mode,
press / and
/
to move the picture.
Press OK to display and press EXIT to exit the screen
display information while playing.
Press BACK to stop playing, or return to the previous
menu, and press BACK repeatedly to return to the
main menu.
Playing a Picture
A
D
E
After entering USB main interface, press / to
select a harddisk partition, and then press /
to
select the Picture option.
Press OK to enter the selected file.
To exit the streaming media playing system and
watch a TV program, you must return to the
streaming media main menu at first (to protect
equipment), and then press SOURCE to select TV or
directly press USB to return to the TV mode.
B
Press OK to confirm the selection and enter the
picture playing interface.
LED -LCD television Owner’s Manual
23
Basic Receiving and Playing Operations
C
Press / to change page, and press / to
select the picture you want to play, and then press
OK to enter the playing display interface.
D
Note
• Press ZOOM to magnify the picture, and then
press// /
to move the picture.
• Press / to select the last or next picture.
• Press
/
to rotate the picture.
❏ The menu display varies with the number and
names of files in your equipment.
Playing Music
A
B
D
To exit playing, just press BACK repeatedly.
After entering USB main interface, press / to
select a harddisk partition, and then press
/
to
select the Music option.
PLAY/PAUSE
Press OK to confirm the selection and press
play the music of your choice.
To exit playing, just press BACK repeatedly.
PLAY/PAUSE
C
FWD
to
REV
Press
to control the music
D.CALL
you currently enjoy. In music playing, press
Playing a Movie
button to Switch Play mode of 3: repeat single
A
B
C
After entering USB main interface, press / to
select a harddisk partition, and then press
/
to
select the "Movie" option.
Press OK to confirm the selection and enter the
movie playing interface.
/
to change page, and press / to
Press
select the movie you want to play, and then press
OK to enter the playing display interface.
• Press / to select the last or next movie.
ǃrepeat randomly
D
To exit music playing, just press BACK repeatedly.
Text
A
B
C
24 LED -LCD television Owner’s Manual
ǃrepeat all
After entering USB main interface, press / to
select a harddisk partition, and then press
/
to
select the Text option.
Press OK to confirm the selection and enter the text
playing interface.
/ // to select the text you want
Press
to read, and then press OK to play the text reading
/
to change page, and press
interface. Press
BACK to exit the reading interface.
Maintenance / Troubleshooting
Note
❏ The red button on the control can doing some
delete. Text playback support TXT format.
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power off and unplug
the power cord before you begin any cleaning.
Cleaning the Screen
D
To exit the Text mode, just press BACK repeatedly.
Settings
A
B
After entering USB main interface, press
select the Settings option.
A
B
/to
Press OK to confirm the selection and enter the
settings selection interface, and then press
/
to select the required options.
Here’s a great way to keep the dust off your screen
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
Make sure the excess water is off the screen, and
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
Extended Absence
If you expect to leave your TV dormant for a long time
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Photo Slide Time
Set the scan speed of pictures to be scanned in slide
form.
There are three options (Middle/Slow/fast). Press
/ to select the desired option.
Movie Subtitle
Troubleshooting
For the sake of time and cost, it is strongly
recommended that you checkout the problem by
yourself according to the instructions listed hereunder
before contacting the after-sales service for technical
assistance.
Press / to select "ON" or "OFF".
Problem
Possible remedies
LED -LCD television Owner’s Manual
25
Specification
No
picture,
no sound
Problem
Turn onthe power supply; Properly
plug theTV setto the powersocket;
Check to see if the power cable of other
appliance is plugged in the TV set. Make
sure that the power cable of the TV set
is properly connected.
Possible remedies
Good
picture,
no sound
Depress the volume button;
Check out theaudio frequency input signals.
Failure of
remote
controller
Check to see if the remote controller
display receiving window are blocked
by other objects and if batteries are
properly loaded.
No color,
weak color
or poor
picture
Designate the item of color from the
Picture menu and depress the volume
button; Keep the display and VCR
separate a reasonable space; Activate
some functions to store picture
brightness; Make sure that the display
and signal source are available and
turned on.
Excessive
brightness
or darkness
Adjust brightness or contrast.
Picture
too big or
small
Adjust the setup of sizes.
One
speaker
failure
Balance the sound in the menu.
Slight
sound
from
display
It is a normal phenomenon.
sound might be produced. These phenomena
might happen in the area 1,500 meters above the
sea level. This is resulted from difference between
air pressures inside and outside the display. This is
not a defect covered by the limited warranty.
Specification
Basic specification and parameter
Power
~ 150-240V
Color System
PAL, SECAM
Stand-by
Consumption
D/K, B/G, I
Video Input
USB,AV, Component, HDMI or PC,
Environmental
condition
Accessories
Note
❏ Production of the screen requires high and precision
technologies. However, there might be some
dank or bright (red, blue or green) spots, or some
anomalistic stripes or spots. This is not defect. If the
TV set is used in an area 2,400 meters above the sea
level where the air pressure is below 750hpa, the
picture on the screen maybe affected and a muffled
26 LED -LCD television Owner’s Manual
Operating temperature range:
+5°C - +35°C Operating
humidity range: 20%-80%
Storage Temperature:
-15°C~+45°C
Storage Humidity: 5%-90%,
non-condensing
If the storage temperature is
lower than 0 °C, please first
lays the machine aside after
in the operating temperature
environment carries on restores
2 hours, then electrifies the use
again, protects your television
not to receive the damage.
Owner’s manual
Remote Control
Alkaline battery
x1
x1
x2
(This is only available for certain
models,please refer to actual products.)
Note
❏ Do not leave the television with static picture in an
extended period as it may result in residual image
on your television screen.
50/60Hz
Product main size (contain stand)
MODEL
Power
Consumption
Net Size(LxWxH)
Net
Weight
LE42H330
110W
1012x41x622mm
15.7Kg
LE46H330
130W
1107x55x733mm
18.2Kg
LE55H330
160W
1308x55x845mm
25Kg
LD42K3
120W
1021x290x704mm
18.2Kg
Format
Note
1
480i/480p
60
❏ Design and specifications are subject to change
without notice. The dimension in this manual is a
2
576i/576p
50
3
720p
50/60
4
1080i/1080p
50/60
approximation.
Format
Recommendatory HDTV/
SDTV(YPbPr/YCbCr) format
Sequence
Number
Format
Refresh
Frequency (Hz)
1
480i/480p
60
2
576i/576p
50
3
720p
50/60
4
1080i/1080p
50/60
Recommendation PC connection
input format
sequence
number
Format
H-Frequency
(KHz)
V-Frequency
(Hz)
1
640*480@60Hz
31.5
60
2
800*600@60Hz
37.88
60
3
1024*768@60Hz
(Recommendatory)
48.36
60
Recommendation DVI connection
input format
Sequence
Number
Resolution
Refresh Frequency (Hz)
1
640*480
60
2
800*600
60
3
1024*768
60
Recommendation HDMI
connection input format
Sequence
Number
Format
Refresh Frequency (Hz)
LED -LCD television Owner’s Manual
27
Specification
28 LED -LCD television Owner’s Manual
Format
LED -LCD television Owner’s Manual
29
Specification
30 LED -LCD television Owner’s Manual
Format
LED -LCD television Owner’s Manual
31
Specification
32 LED -LCD television Owner’s Manual
Specification / Format
Format
LED -LCD television Owner’s Manual
33
Specification
34 LED -LCD television Owner’s Manual
Format
LED -LCD television Owner’s Manual
35

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

advertisement