METALLIZED POLYESTER FILM CAPACITOR MML Features Specifications

METALLIZED POLYESTER FILM CAPACITOR MML Features Specifications
Products Summary
Characteristic graph
Type
METALLIZED POLYESTER FILM CAPACITOR
MML
Features
Very small size, achieved by our manufacturing method.
Ideal for use as interference suppression capacitors because a flame-retardant epoxy resin (UL94
V-0 recognized resin) is used as an outer coating.
Specifications
125V.a.c 0.010 to 4.7μF(E-12)
250V.a.c 0.010 to 1.0μF(E-12)
125V.a.c ±10%(K), ±20%(M)
250V.a.c ±10%(K)
Max
W
Tangent of loss angle 0.01 or less (at 1kHz)
125V.a.c 288V.a.c 1min
250V.a.c 575V.a.c 1min
Voltage proof
125V.a.c 1000V.a.c 1min
Between terminals and case
250V.a.c 1500V.a.c 1min
C≤0.47μF 2,000MΩ or more (at 500V.d.c)
Insulation resistance
C>0.47μF 3,000ΩF or more (at 100V.d.c)
Max
T
Max
H
Cap. tolerance
Single formed lead type
125V.a.c, 250V.a.c
P
±1.0
20Min
Capacitance
Straight lead type
1.5Max
Rated Voltage
-40 to +105°C
Style
Temp Range
Damp heat
40°C 90 to 95%RH W.V.√ 2d.c 1000hr
C/C ±10% within tanδ 0.011 or less
IR C≤0.47μF 1,000MΩ or more
C>0.47μF 1,500ΩF or more
F
±0.5
F
±0.5
125V.a.c
103 to 475
103 to 684
335 to 475
274 to 475
250V.a.c
103 to 105
103 to 104
824 ,105
393 to 105
Cap range
Endurance
5.0±0.5
5.0±0.5
φd±0.05
Between terminals
105°C W.V. 120%, a.c.1000hr
C/C ±7% within tanδ 0.011 or less
IR C≤0.47μF 1,000MΩ or more
C>0.47μF 1,500ΩF or more
5.0Max
5.0Max
For a pitch space(F) of the taping specification, refer to “TAPAING DEMENSIONS”
When using these capacitors as an across-the-line capacitor, it shall be required to follow to either item 1. or item 2 condition.
1. Capacitors shall be connected in parallel with varistor (below 250V for 125V.a.c and 470V for 250V.a.c)
2. Voltage applied for capacitor shall not exceed 250Vo-p for 125V.a.c and 630Vo-p for 250V.a.c.
Dimensions(mm)
Capacitors
Code
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
125
155
185
225
275
335
395
475
Cap(μF)
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
1.2
1.5
1.8
2.2
2.7
3.3
3.9
4.7
W
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
9.8
12.5
12.5
12.5
12.5
12.5
12.5
17.8
17.8
17.8
17.8
17.8
17.8
17.8
25.5
25.5
25.5
H
5.6
5.6
5.6
5.9
5.9
5.9
6.0
6.0
6.2
6.4
6.7
7.7
7.7
7.7
8.6
11.2
11.8
11.3
10.8
11.2
11.7
13.3
14.0
12.8
13.4
14.5
15.5
16.5
17.5
18.5
18.5
19.5
20.7
MML 125V.dc
F
T
P
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.3
7.5
5.0/7.5
4.5
7.5
5.0/7.5
4.8
7.5
5.0/7.5
4.1
7.5
5.0/7.5
4.3
7.5
5.0/7.5
5.0
7.5
5.0/7.5
5.5
7.5
5.0/7.5
5.0
7.5
5.0/7.5
5.5
7.5
5.0/7.5
5.0 10.0
5.0/7.5/10.0
6.0 10.0
5.0/7.5/10.0
6.5 10.0
5.0/7.5/10.0
7.0 10.0
5.0/7.5/10.0
7.0 10.0
5.0/7.5/10.0
7.7 10.0
5.0/7.5/10.0
5.6 15.0
5.0/7.5/10.0
6.2 15.0
5.0/7.5/10.0
7.3 15.0
5.0/7.5/10.0
8.5 15.0
5.0/7.5/10.0
9.3 15.0
5.0/7.5/10.0
10.3 15.0
5.0/7.5/10.0
11.5 15.0
5.0/7.5/10.0
9.3 22.5
15.0/22.5
10.3 22.5
15.0/22.5
11.3 22.5
15.0/22.5
φd
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
W
9.8
9.8
9.8
9.8
9.8
9.8
9.8
12.5
12.5
12.5
12.5
12.5
12.5
17.8
17.8
17.8
17.8
17.8
17.8
17.8
17.8
17.8
17.8
25.5
25.5
H
7.3
7.3
7.5
7.5
7.7
8.0
8.2
7.6
7.8
9.5
9.8
10.3
11.7
10.0
11.3
11.5
12.0
12.7
13.2
14.0
15.5
16.3
17.3
17.3
18.2
MML 250V.dc
F
T
P
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.2
7.5
5.0/7.5
4.5
7.5
5.0/7.5
4.8
7.5
5.0/7.5
5.2
7.5
5.0/7.5
4.5 10.0
5.0/7.5/10.0
4.7 10.0
5.0/7.5/10.0
4.8 10.0
5.0/7.5/10.0
5.2 10.0
5.0/7.5/10.0
5.3 10.0
5.0/7.5/10.0
5.2 10.0
5.0/7.5/10.0
5.0 15.0
5.0/7.5/10.0
4.8 15.0
5.0/7.5/10.0
5.5 15.0
5.0/7.5/10.0
6.0 15.0
5.0/7.5/10.0
6.3 15.0
5.0/7.5/10.0
6.8 15.0
5.0/7.5/10.0
7.3 15.0
5.0/7.5/10.0
7.3 15.0
5.0/7.5/10.0
8.5 15.0
5.0/7.5/10.0
9.3 15.0
5.0/7.5/10.0
9.3 22.5
15.0/22.5
10.2 22.5
15.0/22.5
φd
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
Specifications of products, materials and other contents stated in the catalog are subject to change without notice.
When using our capacitors, please consider the application contact Nissei for the any additional technical specifications relating
to the limits of our performance characteristics.
Standard quantity packed in a box
Taping dimensions
26
Products Summary
Characteristic graph
Type
METALLIZED POLYESTER FILM CAPACITOR
MMD
Features
Ideal for use as interference suppression capacitors because a flame-retardant epoxy resin (UL94
V-0 recognized resin) is used as an outer coating.
High reliability
Specifications
Cap. tolerance
125V.a.c, 250V.a.c
Max
W
P
±1.5
Tangent of loss angle 0.0035 or less (at 50 or 60Hz)
Max
T
Max
H
125V.a.c 0.010 to 1.0µF(E-12)
250V.a.c 0.010 to 0.47µF(E-12)
125V.a.c ±5%(J),±10%(K), ±20%(M)
250V.a.c ±10%(K), ±20%(M)
20Min
Capacitance
Single formed lead type
Straight lead type
1.5Max
Voltage
-40 to +105°C
Style
Temp range
φd±0.05
125V.a.c 288V.a.c 1min
250V.a.c 575V.a.c 1min
125V.a.c 1000V.a.c 1min
Between terminals and case
250V.a.c 1500V.a.c 1min
Between terminals
Insulation resistance 2,000MΩ or more (500V.d.c 1min)
Endurance
105°C W.V. 120%, a.c.1000hr
C/C ±7%within tanδ 0.0047 or less
IR 1,000MΩ or more
Damp heat
40°C 90 to 95%RH W.V.√ 2 d.c 500hr
C/C ±10%within tanδ 0.0041 or less
IR 1,000MΩ or more
5.0Max
5.0±0.5
F
±0.5
F
±0.5
125V.a.c
103 to 105
103 to 224
823 to 105
250V.a.c
103 to 474
103 to 473
563 to 474
Cap range
Voltage proof
5.0Max
5.0±0.5
For a pitch space(F) of the taping specification, refer to “TAPAING DEMENSIONS”
When using these capacitors as an across-the-line capacitor, it shall be required to follow to either item 1. or item 2 condition.
1. Capacitors shall be connected in parallel with varistor (below 250V for 125V.a.c and 470V for 250V.a.c)
2. Voltage applied for capacitor shall not exceed 250Vo-p for 125V.a.c and 630Vo-p for 250V.a.c.
Dimensions(mm)
Capacitors
Code
Cap(µF)
103
123
153
183
223
273
333
393
473
563
683
823
104
124
154
184
224
274
334
394
474
564
684
824
105
0.010
0.012
0.015
0.018
0.022
0.027
0.033
0.039
0.047
0.056
0.068
0.082
0.10
0.12
0.15
0.18
0.22
0.27
0.33
0.39
0.47
0.56
0.68
0.82
1.0
W
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
11.0
14.0
14.0
14.0
14.0
14.0
14.0
19.0
19.0
19.0
19.0
19.0
19.0
25.5
25.5
H
8.2
8.2
8.2
8.2
8.2
8.2
8.2
8.2
8.2
8.7
9.2
9.2
10.5
11.0
11.5
12.0
12.5
11.5
13.0
13.5
14.0
16.0
16.5
16.0
16.5
MMD 125V.ac
F
T
P
5.0
7.5
5.0/7.5
5.0
7.5
5.0/7.5
5.0
7.5
5.0/7.5
5.0
7.5
5.0/7.5
5.0
7.5
5.0/7.5
5.0
7.5
5.0/7.5
5.0
7.5
5.0/7.5
5.0
7.5
5.0/7.5
5.5
7.5
5.0/7.5
6.0
7.5
5.0/7.5
6.0
7.5
5.0/7.5
5.5 10.0
5.0/7.5/10.0
5.5 10.0
5.0/7.5/10.0
6.0 10.0
5.0/7.5/10.0
6.0 10.0
5.0/7.5/10.0
6.5 10.0
5.0/7.5/10.0
7.3 10.0
5.0/7.5/10.0
6.0 15.0
5.0/7.5/10.0
6.0 15.0
5.0/7.5/10.0
6.5 15.0
5.0/7.5/10.0
7.0 15.0
5.0/7.5/10.0
7.0 15.0
5.0/7.5/10.0
8.0 15.0
5.0/7.5/10.0
7.0 22.5
15.0
7.5 22.5
15.0
φd
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
W
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
13.0
18.5
18.5
18.5
18.5
18.5
18.5
18.5
18.5
26.0
26.0
26.0
26.0
H
10.0
10.5
10.5
10.5
10.8
10.8
11.3
12.8
14.5
10.8
11.3
11.5
13.3
13.8
14.5
15.3
16.0
17.0
16.5
17.3
18.0
MMD 250V.ac
F
T
P
5.5 10.0
10.0
6.0 10.0
10.0
6.0 10.0
10.0
6.0 10.0
10.0
6.0 10.0
10.0
6.0 10.0
10.0
6.3 10.0
10.0
6.3 10.0
10.0
6.3 10.0
10.0
6.0 15.0
10.0
6.3 15.0
10.0
6.5 15.0
10.0
6.5 15.0
10.0
7.0 15.0
10.0
7.8 15.0
10.0
8.5 15.0
10.0
9.5 15.0
10.0
7.0 22.5
15.0
8.0 22.5
15.0
8.8 22.5
15.0
9.5 22.5
15.0
φd
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.6
0.8
0.8
0.8
0.8
0.8
0.8
0.8
0.8
Specifications of products, materials and other contents stated in the catalog are subject to change without notice.
When using our capacitors, please consider the application contact Nissei for the any additional technical specifications relating
to the limits of our performance characteristics.
Standard quantity packed in a box
Taping dimensions
2004-01327
Products Summary
Features
METALLIZED POLYESTER FILM CAPACITOR
Type
MML/MMD
Characteristics of permissible current to frequency
MML 125V
5
MML 125V
5
475
225
4
105
474
3
224
2
104
473
Permissible Current (Arms)
Permissible Current (Arms)
6
223
1
105
4
474
3
224
2
104
473
1
223
103
103
0
0
1
10
Frequency (kHz) 100
1
1,000
10
MMD 125V
Permissible Current (Arms)
Permissible Current (Arms)
10
1
105
0.01
0.1
1,000
MMD 250V
10
0.1
Frequency (kHz) 100
474
224
104
473
223
103
1
10
100
Frequency (kHz)
1,000
1
474
0.1
0.01
0.1
224
104
473
223
103
1
10
100
1,000
Frequency (kHz)
Specifications of products, materials and other contents stated in the catalog are subject to change without notice.
When using our capacitors, please consider the application contact Nissei for the any additional technical specifications relating
to the limits of our performance characteristics.
Standard quantity packed in a box
2004-01328
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement