Hayter Mowers 48 Lawn Mower User Manual

Hayter Mowers 48 Lawn Mower User Manual
Colour LCD Television
Digital Tuner Models
32LD9700U
32LD9700C
32LD9700N
37LD9700U
37LD9700C
USER'S MANUAL
MANUEL UTILISATEUR
BEDIENUNGSANLEITUNG
MANUAL DEL USUARIO
MANUALE D'USO
BRUKSANVISNING
BRUKERHÅNDBOK
BRUGERVEJLEDNING
KÄYTTÖOPAS
ΕΓΧΕΙΡΙΔΙΟ ΧΡΗΣΤΗ
GEBRUIKSAANWIJZING
37LD9700N
Non Digital Tuner Models
32LD9600
37LD9600
This is the image of the model 32LD9700U.
READ THE INSTRUCTIONS INSIDE CAREFULLY.
KEEP THIS USER’S MANUAL FOR FUTURE REFERENCE
For future reference, record the serial number of your television.
SERIAL NO.
This serial number is located on the rear of the television.
Ver. 1
ENGLISH
USER'S MANUAL
Thank you for purchasing the HITACHI LCD Television.
Please read this user’s manual carefully before operating
this product.
To ensure proper operation, please read and follow ALL
the instructions, especially the “IMPORTANT SAFETY
INSTRUCTIONS” and “SAFETY PRECAUTIONS”.
Please keep this user’s manual for future reference.
Ver. 1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS ......... 2
INTRODUCTION ........................................... 3
About This Manual ................................................ 3
Trademark Credits ................................................. 3
About Software ...................................................... 3
Infomation for Users Applicable in
European Union Countries ............. 3
SAFETY PRECAUTIONS ............................... 4
Important for United Kingdom ............................... 4
About the Symbols ................................................ 4
Cleaning and Maintenance.................................... 7
ABOUT LCD PANEL ...................................... 8
Common Phenomena of LCD Panel ..................... 8
FEATURES .................................................... 9
SUPPLIED ACCESSORIES ............................ 9
COMPONENT NAMES ................................. 10
Main Unit ............................................................. 10
Remote Control ................................................... 11
PREPARATION ............................................ 12
Remote Control Batteries Installation .................. 12
Handling the Remote Contorl .............................. 12
Caution When Moving the Main Unit ................... 12
Safety Precaution on Main Unit Installation......... 13
Anti-Tumble Measures ........................................ 13
CONNECTION ............................................ 14
Terminal Positions ............................................... 14
Connecting Procedure......................................... 14
BASIC OPERATION..................................... 20
Power On/Off ....................................................... 20
Easy Preset ......................................................... 21
Volume UP/DOWN .............................................. 22
Mute .................................................................... 22
Input Switching to TV/AV1~5,HDMI, and RGB .... 23
Input Signal Screen Display ................................ 23
TV SETUP OPERATION .............................. 24
How to use the On-Screen Display
(OSD) system ........... 24
Language Menu .................................................. 24
Setup Menu (TV mode) ....................................... 25
Setup Menu (AV mode) ....................................... 27
Setup Menu (RGB mode) .................................... 28
Function Menu..................................................... 30
Picture Menu (TV/AV mode) ................................ 32
Picture Menu (RGB mode) .................................. 35
Audio Menu ......................................................... 37
Timer Menu ......................................................... 38
Analogue Teletext ................................................ 39
DIGITAL TERRESTRIAL TELEVISION
(DTT) OPERATION* ....... 40
* The section “DIGITAL TERRESTRIAL TELEVISION
(DTT) OPERATION” is only for 9700 models.
How to use the On-Screen Display
(OSD) system ...................................................... 40
Changing Preset.................................................. 41
Channel Selections ............................................. 42
Channel Sort ....................................................... 43
Channel Editing ................................................... 43
Utilizing the Information Tool ............................... 44
Timer Programming ............................................. 46
Configuring the Setting ........................................ 47
Common Interface ............................................... 50
TV Setup Menu ................................................... 50
FUNCTION .................................................. 51
Power Swivel ....................................................... 51
Size Switching ..................................................... 52
Multi Picture Mode............................................... 56
Picture Freezing .................................................. 60
Photo Input Function ........................................... 61
Audio Switching ................................................... 67
Power Save Mode ............................................... 68
DVD Player / STB Selection ................................ 69
TROUBLESHOOTING .................................. 70
When Following Messages Appear
on the Screen ...................................................... 70
Symptom and Check List .................................... 70
PRODUCT SPECIFICATIONS ...................... 73
Signal Input ......................................................... 74
Recommended Signal List .................................. 75
IMPORTANT SAFETY INSTRUCTIONS
Read this instruction thoroughly.
Retain this instruction for future reference.
Heed all warnings and cautions to prevent possible danger.
Follow all instructions. Improper handling could cause personal injury and/or serious damage to the unit that may
shorten its service time.
Do not block any ventilation openings.
Install the product in accordance with the manufacture’s instructions.
Before calling for the technical support or service technician, read “TROUBLESHOOTING” ( 70 ~
the symptoms when problems occur during installation or operation of the product.
72 )
to determine
If serious problems happen (such as smoke or an abnormal odour from the unit), turn off the Main Power, unplug
the Power Cord, and then, contact your local dealer immediately.
2
Thank you for purchasing the HITACHI LCD Television. We hope that you will enjoy the great performance with this
product.
This LCD Television has been designed to meet the international standards. However, it could cause personal
injuries and property damage if improperly handled. In order to prevent potential danger and obtain maximum benefit
from your set, please observe the following instructions when installing, operating, and cleaning the product.
Keep this manual for future reference, and record the serial number of your set in the space provided on the front
cover page of this manual.
About This Manual
The information in this manual is subject to change without notice.
This manual has been created with extra care. In case that you have any comments or questions regarding this
manual, please contact your local dealer or our Customer Service Centre.
Before operating this set, please fully understand the prerequisite such as specifications or constraints of the
hardware and software. We are not responsible and have no liability for any loss, damage or injury as a result of
misuse.
Reproduction, copying, use, modification, and/or transmission in whole or in part of this manual are prohibited
without any prior written permission.
All other products and company names used in this manual are trademarks or registered trademarks of their
respective owners.
Trademark Credits
VGA and XGA are trademarks of International Business Machines Corporation.
APPLE and Macintosh are registered trademarks of Apple Computer Inc.
VESA is a registered trademark of the Video Electronics Standard Association.
Licensed by BBE Sound, Inc. under USP5510752 and 5736897.
BBE and BBE symbol are registered trademarks of BBE Sound, Inc.
Manufactured under license from BBE Sound, Inc.
WOW, SRS and (z) symbol are trademarks of SRS Labs, Inc.
WOW technology is incorporated under license from SRS Labs, Inc.
SD Logo is a trademark.
HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC.
DVB is a registered trademark of the DVB Project. This logo indicates that the product is compliant with European
Digital Broadcasting.
FREEVIEW and the FREEVIEW logo are trade marks of DTV Services Ltd and are used under license. FREEVIEW
Logo © DTV Services Ltd 2002. This logo indicates that the product is set up to view digital terrestrial TV.
The Digital logo is a Certification Mark. This logo indicates that the product will work after implementation of full
digital switchover.
The "HD ready" logo is a trademark of EICTA.
Even if no special notation has been made of company or product trademarks, these trademarks have been fully
respected.
About Software
You may not alter, decompile, disassemble, decrypt, or otherwise reverse- engineer the Software installed in this
product, which are prohibited by law.
Information for users applicable in European Union countries
This symbol on the product or on its packaging means that your electrical and electronic equipment should
be disposed at the end of life separately from your household wastes. There are separate collection
systems for recycling in EU.
For more information, please contact the local authority or the dealer where you purchased the product.
3
ENGLISH
INTRODUCTION
SAFETY PRECAUTIONS
For your safety, please read the following precautions carefully before using this product. Improper use would cause serious personal injuries
and/or damage to your property or this product.
Important For United Kingdom
IMPORTANT FOR UNITED KINGDOM
WORDING FOR CLASS I EQUIPMENT INSTRUCTION BOOKS AND LABELS
The mains lead on this equipment is supplied with a molded plug incorporating a fuse, the value of which is indicated on the pin face of the plug.
Should the fuse need to be replaced, an ASTA or BSI approved BS 1362 fuse must be used of the same rating. If the fuse cover is detachable
never use the plug with the cover omitted. If a replacement fuse cover is required, ensure it is of the same colour as that visible on the pin face of
the plug. Fuse covers are available from your dealer.
DO NOT cut off the mains plug from this equipment. If the plug fitted is not suitable for the power points in your home or the cable is too short to
reach a power point, then obtain an appropriate safety approved extension lead or consult your dealer.
Should it be necessary to change the mains plugs, this must be carried out by a competent person, preferably a qualified electrician.
If there is no alternative to cutting off the mains plug, ensure that you dispose of it immediately, having first removed the fuse, to avoid a possible
shock hazard by inadvertent connection to the mains supply.
WARNING: THIS EQUIPMENT MUST BE EARTHED
IMPORTANT
Green & Yellow
to Earth
The wires in the mains lead are coloured in accordance with the following code :
Green and Yellow = Earth, Blue = Neutral, Brown = Live.
As these colours may not correspond with the coloured markings identifying the terminals in your plug, proceed
as follows:
Brown to Live
The wire which is coloured GREEN and YELLOW must be connected to the terminal in the plug which is marked
with the letter E or by the earth symbol
or coloured GREEN or GREEN and YELLOW.
The wire coloured BLUE must be connected to the terminal marked with the letter N or coloured BLUE or
BLACK. The wire coloured BROWN must be connected to the terminal marked with the letter L or coloured
BROWN or RED.
Fuse
Cord Clamp
Blue to Neutral
About the Symbols
The following are the symbols used in this manual and affixed on the unit itself. Please fully understand the meanings of the symbols before
reading the instructions in this section.
WARNING
Never ignore the instruction. There are risks of serious injuries or possible death to the user.
CAUTION
Do not ignore the instruction. There are possibilities of personal injuries and/or property damage.
Other Symbols
The triangle with illustration is intended to alert the users that there are possibilities of fire, explosion, or high
temperature if the product is handled improperly.
Each illustration within the triangle specifies the contents in detail. (The figure on the left is an example.)
The circle with diagonal line and illustration indicates a prohibited action (the symbol to the left indicates that
disassembly is prohibited.)
This symbol indicates a compulsory action.
The contents will be clearly indicated in an illustration or nearby (the symbol to the left indicates that the power plug
should be disconnected from the power outlet).
WARNING
There is a risk of fire, electric shock, or serious injury.
■ Unplug the power cord immediately when serious problems occur.
Serious problems such as
Smoke, abnormal odor or noise is emitted from the product.
No picture, no sound or distorted picture on the display.
Foreign objects (such as water, metals etc.) get inside the unit.
Do not continue using the product under these abnormal conditions.
Turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.
For your safety, never try to repair the product by yourself.
4
Disconnect the
plug from the
power outlet.
ENGLISH
SAFETY PRECAUTIONS (continued)
WARNING
There is a risk of fire, electric shock, or serious injury.
■ Do not insert liquids or any foreign objects (such as metals or flammable items) inside the unit.
In case it happens, turn off the main power, unplug the Power Cord, and contact your dealer immediately.
Use special caution when younger children are around the unit.
■ Do not remove cover, or modify the product.
High-voltage components are installed inside of the unit. Removing covers can expose you to high
voltage, electrical shock, and other dangerous conditions.
Contact your local dealer to perform servicing such as inspection, adjustment, or repair work.
Do not
disassemble
■ Install the unit in a sensible place where it does not expose anyone to danger or injury.
Impact with the edge of the unit could cause injury.
■ Do not place any objects on top of the unit.
Objects such as
Liquid containers (vase, fish tank, flowerpot, cosmetics or liquid medicine).
If water or any liquid spill onto the unit, it may cause short-circuit and result in fire or electrical shock.
In case that it happens, turn off the Main Power, unplug the Power Cord, and contact your dealer immediately.
Do not place anything heavy on top of the unit.
Do not climb on or hang from the unit.
Do not let your pets get on top of the unit
■ Do not expose this unit to rain or moisture.
Never use this unit in the bathroom or shower room.
Beware when you use this product outside, especially in rainy, or snowy weather, and at the beach or
waterfront.
When the product gets wet, it could cause fire or electrical shock.
■ Unplug this unit during lightning storm.
To reduce the risk of electrical shock, do not touch the product when starts lightning.
Disconnect the
plug from the
power outlet.
■ Do not do anything that may damage the Power Cord.
Do not damage, modify, twist, forcibly bend, heat, or pull excessively the Power Cord.
Do not place heavy objects (including the unit itself) on top of the Power Cord.
If the Power Cord is damaged, contact your dealer for repairs or exchange.
■ Use only with designated power supply voltage.
To prevent the risk of fire and electrical shock, operate this product only with the power supply voltage indicated on the
unit.
■ Beware not to drop or have any impact on the unit.
Take extra care while moving the unit.
There is no protection glass on the surface of the LCD panel. Thus, do not press the panel surface with your fingers or
hands. Or do not hit anything against the unit. These actions would damage the LCD cells or the panel surface and
could cause the failure or personal injuries.
In case that you drop the unit or the cabinet is damaged, turn off the Main Power, unplug the Power Cord and contact
your local dealer immediately.
Continuing use of the product with above conditions would cause fire or electrical shock.
■ Clean dust or metals on or around the blade of the power plug regulary.
Continuing use of the product with above condition may cause fire or electrical shock.
Always unplug the Power Cord first, and clean the blades with a dry cloth.
5
SAFETY PRECAUTIONS (continued)
CAUTION
■ Do not place the unit on an unstable surface.
Unstable places such as
Tilted surface or shaky rack, table, stand or trolly.
If the unit falls down, it could cause personal injury.
■ Do not place the unit at a dusty place.
It could cause malfunction.
■ Do not cover or block any ventilation holes on the product.
The unit would overheat, and it could cause fire or damage the product which may shorten its service life.
Install the product in accordance with the instructions in this manual.
Do not place the unit with ventilation side down.
Do not install the unit on the carpet or bedclothes.
Do not cover the unit with table cloth etc.
■ Be sure to ground the earth cable correctly.
Especially when you use Power Cord adapter, be sure to connect the earth cable to the ground terminal. Incorrect
connection would cause fire or electrical shock.
For your safety, always make sure to unplug the Power Cord before connect or disconnect the earth cable .
■ Follow the Anti-tumble measures in this manual.
If the unit tumbles over, there is a risk of personal injury and possible death. Also, it would damage the product
seriously.
■ Do not install this product near the medical devices.
To prevent malfunction of the medical devices, do not use this product and medical devices in the same room.
■ Do not place the CRT-based television near the speakers of the LCD television.
It could cause the partial discoloration or blurring of the image on a CRT-based television.
Please install it away from the speakers of the unit.
■ Disconnect all of the external connection cables and detach the anti-tumble measures before
moving the unit.
It may cause fire, electrical shock, or personal injuries.
■ Connect the power plug securely.
Improper connection will cause overheating and may result in fire.
Do not touch the blades of the plug while connecting it to the wall socket. It could cause electrical shock.
If the plug is not fitted for the wall socket, contcat your dealer for replacement.
■ Do not handle the Power Cord with wet hands.
It could result in electrical shock.
■ Do not pull the cord when you unplug the Power Cord.
It may damage the cord and could result in fire or electrical shock.
Hold the plug when disconnecting it.
■ Unplug the Power Cord when you do not intend to use the product for long periods of time.
■ Handle the batteries properly.
Improper or incorrect use of the batteries may cause corrosion or battery leakage, which could cause fire, personal
injury or damage to property.
Use only the types of the batteries which are indicated in this manual.
Do not insatall new batteries with used ones.
Install the batteries correctly by following the polarity (+ and -) indications on the battery compartment.
Do not despose of the used batteries as domestic waste. Dispose of them in accordance with the local regulations.
6
Supply connect
the ground wire.
SAFETY PRECAUTIONS (continued)
ENGLISH
PRECAUTIONS
■ Do not install areas where it will be subjected to high temperatures.
It could damage the cabinet or parts of the product.
Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat.
Keep the unit out of direct sunlight. It could increase the temperature of the unit and cause malfunction.
■ Viewing Advice
The lighting of the environment in which the product is used should be appropriate. Too bright or dark environments are not good for
your eyes.
Take time to relax your eyes occasionally.
When you use this product, view from a distance equal to 3 to 7 times the height of the screen. This is the best viewing distance in
order to protect your eyes against eyestrain.
Adjust the volume to an appropriate level, especially during the night.
■ When transporting this product:
When the product needs to be transported due to moving or repair, use the carton box and buffer material that came with this
product.
Do not transport this product on its side. It could damage the panel glass or degrade the phosphors
of the panel.
■ Keep radio away from this unit whilst in use.
This unit is designed to meet the international EMI standards due to prevent radio interference. However,
the unit may generate noise in the radio.
If the noise is heard on radio, please try the following actions.
Adjust the direction of the radio antenna in order not to receive the interference from the unit.
Keep the radio away from the unit.
Use coaxial cable for the antenna.
■ About infrared communication devices:
The infrared communication devices such as cordless microphones or cordless headphones may not operate properly around the unit.
It is because of communication failure. Please note that this is not malfunction.
■ When you dispose of this product at the end of its life, follow the regulations in your residential area.
For more information, contact the local authority or the dealer where you purchased the product.
Cleaning and Maintenance
Please make sure to unplug the power cord before cleaning the unit.
■ How to clean the LCD panel of the unit.
Wipe the panel with a lint-free and dry cloth in order to prevent damage to the panel surface.
Do not use a chemical cloth or cleaner. Depending on the ingredients, it may cause discoloration and damage the panel surface.
Do not wipe with a hard cloth or rub hard. It may hurt the panel surface.
In case of the greasy dirt such as fingerprint, wipe with a lint-free cloth moistened by a diluted neutral detergent solution, and then
wipe with a soft and dry cloth.
Do not use a spray cleaner. It could cause malfunction.
■ How to clean the cabinet of the unit.
The following may cause crack, deformation, and paint peeling.
Do not wipe the cabinet with benzene, thinner, and other chemical products.
Do not spray volatile solutions such as insecticide over the cabinet.
Do not leave the cabinet in prolonged contact with plastic or rubber materials.
Do not use a chemical cloth, cleaner or wax. Depending on the ingredients, it may cause crack and deformation.
Use a lint-free cloth to clean the cabinet and control panel of the monitor. In case of the heavy dirt, wipe with a soft cloth moistened
by a diluted neutral detergent solution, and then wipe with a soft and dry cloth.
Never use the following detergents. It could cause crack, discoloration, and scratch.
Acid/alkaline detergent, alcoholic detergent, abrasive cleaner, powder soap, OA cleaner, car wax, glass cleaner, etc.
7
ABOUT LCD PANEL
Common Phenomena of LCD Panel
The following are the common phenomena when operating LCD Panel due to its structural reason.
Please note that they are not malfunctions.
Defective Spots on Panel
The LCD panel is manufactured with high-precision technology. However, there might be some spots that are not
emitted, brighter than the others, or in different colours, etc.
Surface on Panel
The LCD panel displays images by blinking the fluorescent lamps internally. This could raise the temperature of the
display surface.
In addition, do not impact strongly on the surface of the panel because LCD panel is made with fine processing
glass.
Residual image
When a still image or menu is displayed on the screen for a short time (about a minute) and then switches to another
image, it may leave an “after-image” on the screen.
The residual image will disappear on its own.
The Usage under the Low Temperature Environment
Because of the structural characteristics of the LCD panel, the response speed of the LCD panel becomes slower
when the ambient temperature around the monitor becomes too low. In some cases, it may cause the residual
image.
The residual image will disappear on its own as the temperature goes up and back to normal.
8
FEATURES
ENGLISH
Enjoy not only beautiful and high-quality pictures on the display, but also various kinds of useful and convenient
functions in your daily life!
Large-screen and high-definition LCD panel.
Improved Digital signal processor.
High quality sound with deeper, richer and dynamic bass tones.
9700 models have various functions as Digital Terrestrial Television (More TV channels, EPG, etc).
3 Scart terminals installed.
Accept more digital input devices with 2 HDMI terminals.
Great diversity of connecting terminals to cover wide range of audio-visual equipments.
Enjoy the image from PC with large, high-definition LCD screen.
New Photo Input function with selectable Background Music.
SD Card Slot installed.
Easy-to-use On-Screen Display system operating with Remote control.
Low power consumption with Power Saving feature.
Motorized Power Swivel feature.
Provided 1200 pages for Teletext.
SUPPLIED ACCESSORIES
Check the supplied accessories before installation.
In case of missing or damaged, please contact the dealer immediately.
User’s Manual
Remote Control
AA size batteries
X2
Power Cord
UK only
Except UK
* The type of power plug provided is different depending
on the model
9
COMPONENT NAMES
Main Unit
Front Panel
Cabinet
Panel
Indicating Lamp
Remote Control Receiver
Speaker
Main Power Switch (on the bottom surface)
Desktop Stand
Rear Panel
32” models
37” models
Handgrips
Side Input
Terminal Board (External Device
Connection)
Power Cord Socket
Control Panel (see below for details)
Please refer to 14 ~ 19 for the detailed
information for the connections.
Control Panel (including Card Slot)
SD MEMORY
CARD
PUSH-EJECT
P
P
OK
PH35814
10
SD Memory Card Slot
Sub Power button
Channel UP/▲button
Channel DOWN/▼button
Volume UP
/►button
Volume DOWN
/◄button
Input Select /OK button
Menu / Return button
Remote Control
Sub Power
Function Select (TV/DVD/SAT)
Press this button to select function mode
indicating LED lamp.
Normally, select “TV”.
Input Select/DVD Control/Photo Input Control
Press this button to change input mode.
In addition, you can use these buttons while
operating the selected brand of DVD player or
Photo Input function. (DTT input: 9700 models
only)
Menu
Cursor
OK
Sound Mode
Sound mode can be changed each time pressed
in the following sequence. Movie→Music→
Speech→Favourite
CHI/II
This is exclusively for TV audio A2/NICAM mode.
Volume Up/Down
Programme Select
Press these buttons to select a TV program
directly.
Freeze/Multi Mode [Hold]
Press this button to change the picture to freeze
mode. Press it again to return to normal picture.
In addition, during multi-picture mode, each time
press this button, the picture is changed to 2, 4,
and 12 multi mode. (Also, it holds the page in
text mode.)
[Colour (Red, Green, Yellow, Blue)]
[Index]
Time [Cancel]
Pressing this button can indicate the time by OnScreen display when receiving a TV programme
on the screen.
TV/Text [TVÙText]
This switches between the TV mode and the
Teletext mode.
Zoom [TextÙTV+Text]
Press this button to change picture size.
Recall
Pressing this button shows the input signal
status.
Return
You can use this to return to the previous menu.
Picture Mode
Picture mode can be changed each time pressed
in the following sequence. Dynamic→Natural→
Cinema
Channel Up/Down
Mute
Multi Picture
Press this button to change the picture to multipicture mode. Press it again to return to normal
picture.
Photo Input (Photo/Rotate/Slide Show)
These buttons are to display and control the
pictures from digital still camera or USB card
reader.
Swivel (with Desktop Stand)
This function is to rotate TV. Select the degree
of rotation with cursor key.
NOTE
Some buttons are only for Teletext mode, and other buttons have different functions in Teletext mode from
the use of TV mode. Those buttons are indicated by [ ]. Refer to "Analogue Teletext" on 39 .
11
ENGLISH
COMPONENT NAMES (Continued)
PREPARATION
Remote Control Batteries Installation
This remote control operates on 2 “AA” batteries.
Handling the Remote Control
Use the remote control within about 5m from
front of the unit’s remote-control sensor and
within 30 degrees on both sides.
1. Open the battery compartment
cover
Slide open the battery
compartment cover on the
backside of the remote control in
the direction of an arrow.
2. Install the batteries
Install 2 “AA” batteries (included) making
sure the polarities match the indication
inside the compartment.
Within 30
degrees
Within 30 degrees
About 3m
About 3m
About 5m
3. Close the battery compartment cover.
To close the battery compartment
cover, slide the cover in the
direction of an arrow till it clicks
shut.
CAUTION
It could cause corrosion or battery leakage and may result in physical injury
and/or property damage including fire.
Never mix used and new batteries in the device.
Replace all the batteries in a device at the same time.
Remove the batteries if the remote control is not going to be used for an extended period of time.
To avoid possible failure, read the following instructions and handle the
remote control properly.
Do not drop or cause impact to the remote control.
Do not spill water or any liquid on the remote control.
Do not place the remote control on a wet object.
Do not place the remote control under the direct sunlight or near sources of excessive heat.
Caution When Moving the Main Unit
As this product is heavy, whenever it is moved, two people are required to transport it safely.
When transferring the unit, hold the unit by using the handgrips at the backside of the panel. (See the figures below
for details.)
32” models:
Handgrips
12
37” models:
Handgrips
PREPARATION (continued)
Read SAFETY PRECAUTIONS (
4
to
7
ENGLISH
Safety Precaution on Main Unit Installation
) carefully besides this page.
*The Desktop Stand has been used for the illustration in this manual.
When installing the main unit, be sure to use the specified mount units in order to obtain maximum performance
and maintain the safety.
We assume no responsibility or liability for personal injuries or property damages caused by use of other mount
units or improper installation.
As for the installation instruction, please read each user’s manual of the mount units: for Desktop Setup, Wall
Mounting, and Ceiling Mounting.
In case of using Wall or Ceiling Mounting unit, by contacting your local dealer, ask the specified installation
specialist to set up. Never attempt to install it by yourself. It could cause injuries or damages.
Please leave the adequate space around this unit in order
to avoid increasing the internal temperature and keep
safety while using swivel function.
Make sure not to block any ventilation holes.
Do not install the unit in the small space such as inside
the rack, closet or the box.
Leave more than 10cm of clearance from each side of
unit and 30cm from the top of unit to wall.
30cm
or more
10cm
or more
10cm or more*
10cm
or more
Cord
or
chain
Clamp
Without Swivel function: Leave at least 10cm of clearance
behind rear unit.
With Swivel function: Leave the adequate space to obtain
the maximum performance of Swivel Function.
(32" models: 25cm , 37" models: 29cm)
Refer to 51 for Swivel Function.
Anti-Tumble Measures
Install in a stable place and implement safety measure against overturning.
Securing on desktop
Securing to a wall or pillar
Using commercially available wood screws, secure
the set firmly in position by fastening them to the
screw holes at the rear of the stand as shown in the
diagram.
Using a commercially available cord, chain, and
clamp, secure the set to a wall or pillar.
Cord or chain
Cord or chain
Hook
Screw
Clamp
Wall or pillar
Wood screw
Two places
Securing to ceiling
Using a commercially available cord, chain, and clamp, secure the set to a ceiling.
NOTE
For more information regarding the mounting of the unit, please contact your dealer.
Loosen a cord or chain enough while operating power swivel to avoid physical injury.
Please install the unit in a sensible location where it does not expose anyone to the danger of knocking into the
unit, causing injury to themselves or the LCD TV.
13
CONNECTION
Terminal Positions
Rear
Power Cord Socket
Aerial Socket
AV1
AV2
AV3
AV4
Monitor Out and Sub Woofer
Service use only
Power Swivel Terminal
(See 51 )
PC Connection terminals
(D-sub 15 pin and mini stereo for
Audio)
HDMI1, 2 and mini stereo for Audio
Common Interface slot
*9700 models only
PH35826
SD MEMORY
CARD
PUSH-EJECT
P
AUDIO
PC
INPUT(HDMI)
AUDIO
INPUT
(AV2)
INPUT
(AV3)
Y/VIDEO
PB
AUDIO
PR
L
C
SUB WOOFER
VIDEO
MONO R
INPUT
(AV4)
WOW, SRS and
symbol are
trademarks of SRS Labs, Inc.
Licensed by BBE Sound, Inc. under
one or more of the following US
patents : 5510752, 5736897.
BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
INPUT(AV5)
ANALOG RGB
INPUT
(AV1)
HDMI2
AUDIO
OUTPUT
L
R
HDMI1
SERVICE USE ONLY
R
INPUT(RGB)
ANT
OK
L/MONO
AUDIO
VIDEO S-VIDEO
P
COMMON
INTERFACE
PH35814
POWER SWIVEL
AC
C.2 C.1
Side
AV5
Headphone terminal
Photo Input terminal
SD Memory Card slot
Connecting Procedure
This unit is ready for various kinds of connections. Make a connection in the following steps. Be sure to turn off the
Main Power first when connecting external equipments.
1. Connect Power Cord to the rear panel.
2. Connect Aerial Lead.
3. Connect your external equipments to the unit if any.
4. Connect the Power Plug to the Wall Socket.
1. Connecting Power Cord to the Rear Panel
Connect Power Cord to the unit.
*Make sure not to connect the Power Plug to the Wall Socket
until all connections are completed.
2. Connecting Aerial Lead.
Analogue
Digital
STB
VCR
There are two ways to connect Aerial Lead.
When you do not have any other external equipment:
Connect the Aerial Lead directly into the Socket at rear panel.
When you have one or more external devices to connect:
[Example: Connecting Antenna
1. Use RF cable to connect between each equipment and
through STB and VCR]
Antenna.
2. Connect the Aerial Lead to the Aerial Input socket of an external device such as a VCR.
3. Connect the RF cable from the equipment ‘Out’ to the other equipment ‘In.’
4. Then, connect from the equipment ‘Out’ to “ANT” on the LCD screen Socket on marked.
IN
IN
OUT
OUT
NOTE
If analogue and digital broadcast signals are provided from the separated cables (antenna), please use a mixer
and RF cable to connect antenna terminal in order to receive both signals.
Precautions when connecting the aerial
Please use a coaxial cable which is free from interference to connect the aerial. Avoid using a parallel flat feeder
wire as interference may occur, causing reception to be unstable and stripe noise to appear on the screen.
Avoid using indoor aerial as this may be affected by interference. Please use CATV net or outdoor aerial.
If noise appears in the picture of VHF-Low band channel, please use a double-shielded cable (not provided) for
RF LEADS to reduce the noise.
14
CONNECTION (continued)
ENGLISH
Connecting Procedure (continued)
3. Connecting to External Equipment
Terminals on Rear
AV1 can be connected to the equipment with Composite/S-Video/Audio input, and Composite/Audio output.
The output signal can support not only Analogue but also Digital Terrestrial TV signals.
[Example]
VCR
INPUT Composite/S-Video/Audio
INPUT
(AV1)
DVD player
Set-Top Box
IN
OUT
If STB is connected to AV1 in France, it descrambles some of the Pay TV images by resending the signal again (In/Out).
OUTPUT
Composite/Audio
INPUT
(AV1)
[Example]
VCR
(Recording Device)
OUT
IN
When you are watching either TV or DTT broadcasting from AV1, you can switch to the other by setting
"Scart Output" in Setup menu. For example, whilst you are watching TV, it is possible to record the DTT
programme. Refer to 26 27 about "Scart Output" in Setup menu.
AV2 and 3 can be connected to the equipment with Composite/RGB/Audio input, and Composite/Audio output.
[Example]
INPUT Composite/RGB/Audio
VCR
INPUT
(AV2)
DVD player
Set-Top Box
IN
OUTPUT
OUT
Composite/Audio
INPUT
(AV2)
[Example]
VCR
(Recording Device)
OUT
IN
15
CONNECTION (continued)
Connecting Procedure (continued)
AV4 can be connected to the equipment with either Component or Composite output. Depending on whether the
Y/VIDEO input of your selected equipment is Y signal or Video signal, it automatically regards as Component or
Composite. When using as Composite, do not insert the jacks into PB or PR.
IN
Y/VIDEO
PB
[Example]
OUT
VCR
AUDIO
PR
L
C
MONO R
INPUT
(AV4)
DVD player
Set-Top Box
If your external device has a Component terminal, COMPONENT connection is recommended for
higher quality picture.
Monitor Out can be used to display same image as main unit on another monitor.
When this output terminal is connected to an external monitor with a 75 Ohm terminal, the same image from
composite(AV1~5), or RF signal can be displayed to the external monitor.
OUT
VIDEO
[Example]
IN
AUDIO
OUTPUT
L
VCR
(Recording Device)
R
Sub Woofer terminal can bring the deep bass sound from the external speaker.
[Example]
IN
OUT
SUB WOOFER
or
16
CONNECTION (continued)
ENGLISH
Connecting Procedure (continued)
PC terminals (D-sub 15 pin + audio) is connected to PC, which allows Analogue RGB signal.
IN
OUT
[Example]
(Mini Stereo plug)
or
HDMI 1 2 terminals can be connected to the devices with HDMI output, or if the external device has DVI output, this can be
available with HDMI-DVI conversion cable. In case of using the HDMI-DVI, connect to audio terminal besides HDMI.
IN
OUT
[Example]
VCR
(Mini Stereo plug)
DVD player
(HDMI2)
(HDMI)
or
(DVI)
Set-Top Box
(HDMI1)
(HDMI)
(HDMI)
Information
HDMI(High Definition Multimedia Interface) is next-generation multimedia I/O interface. Only one cable is used to
transmit all video/audio/control signals, which creates easy connection.
Moreover, those digital signals can produce high quality data without any degradation.
You are provided with two HDMI terminals, one of the most remarkable features.
If your external device has a HDMI terminal, HDMI connection is recommended for higher quality picture and sound.
NOTE
When both HDMI1 and HDMI2 terminals are connected to devices via HDMI-DVI conversion cable, HDMI2 has a
priority over the audio terminal.
Common Interface Slot allows you to receive Pay TV service with detachable modules.
Before inserting the module, make sure to turn off the main power, and take off the cover of slot as shown and then insert
the module all the way into the slot. Refer to 50 for the details.
*9700 models only
Remove the slot cover
Push the top of slot cover to release the interlock
and lift it the direction as shown.
Common Interface Module
17
CONNECTION (continued)
Connecting Procedure (continued)
Terminals on Side
Since the following terminals are located on the side, it is very convenient to connect an extra device on a temporary
basis after completing the connections on the rear panel.
AV5 can be connected to the equipment with S-Video output and composite output.
[Example]
VCR
L/MONO
AUDIO
VIDEO S-VIDEO
OUT
Camcorder
DVD player
R
INPUT(AV5)
IN
Home video game system
If your external device has S-video terminal, S-VIDEO connection is recommended for higher quality picture.
Headphone The detail settings can be adjusted from Audio Menu on page
38 .
(Mini Stereo plug)
The audio from the speaker will be muted when connecting the headphone to this terminal.
Photo Input terminal can be connected to a digital still camera or USB card reader with USB cable. For details, refer
to the Photo Input function shown on 61 ~ 66 .
[Example]
OUT
Digital Camera
PHOTO
INPUT
IN
USB Card reader
NOTE
This photo input terminal does not support general USB devices such
as USB memory. Please do not connect with those devices.
SD Memory Card slot can be used for the Photo Input function with the SD (or MMC) card memory containing
pictures. For details, refer to the Photo Input function shown on 61 ~ 66 .
SD MEMORY
CARD
PUSH-EJECT
18
SD Card / MMC
CONNECTION (continued)
ENGLISH
Connecting Procedure (continued)
4. Connecting the plug into the wall socket
Connect the Power Cord after completing all other connections.
(The type of plug is different from this drawing for some countries.)
UK only
Except UK
CAUTION
Use only the Power Cord provided.
Do not use a power supply voltage other than that indicated(AC220-240V, 50Hz). It may cause fire or electric shock.
For the LCD television, a three-core power cord with a ground terminal is used for efficiency protection. Always be sure
to connect the Power Cord to a grounded outlet and make sure that the cord is properly grounded. If you use a power
source converter plug, use an outlet with a ground terminal and screw down the ground line.
Ensure that both ends of power cord are easily accessible.
If you have to change the power cord, please use the certified power cord that meets your region’s safety standard.
Information
How to secure the cables.
After connecting all of the cables to the terminals, secure them with the band.
When you secure the cables, please be careful not to tighten too much.
INPUT(RGB)
AUDIO
ANT
How to fasten the band:
To tighten
PC
ANALOG RGB
INPUT
(AV1)
INPUT(HDMI)
AUDIO
INPUT
(AV2)
INPUT
(AV3)
Y/VIDEO
PB
AUDIO
PR
L
C
SUB WOOFER
VIDEO
MONO R
INPUT
(AV4)
Pull the band in the
direction of the arrow.
WOW, SRS and
symbol are
trademarks of SRS Labs, Inc.
Licensed by BBE Sound, Inc. under
one or more of the following US
patents : 5510752, 5736897.
BBE and BBE symbol are registered
trademarks of BBE Sound, Inc.
HDMI2
To loosen
AUDIO
OUTPUT
L
R
HDMI1
SERVICE USE ONLY
COMMON
INTERFACE
Knob
Loosen the band by
pushing the knob in the
direction of the arrow.
POWER SWIVEL
AC
C.2 C.1
With long band
19
BASIC OPERATION
Power On/Off
Now, turn On the main power to the unit. Make sure that the Power Cord is
plugged into the wall socket.
Main Power switch (on the bottom surface)
To turn On the power of the unit:
1. Press the Main Power switch on the unit.
The Indicating Lamp will illuminates in Red (Standby mode).
2. Press Sub Power button either on the control panel or on the remote control.
Sub Power button
The colour of the Indicating Lamp turns into Green, and the image will
display on the screen.
DTT/TV
SD MEMORY
CARD
To turn Off the power of the unit:
PUSH-EJECT
1. Press Sub Power button either on the control panel or on the remote control.
The image disappears from the screen and the Indicating Lamp turns into
Red (Standby mode).
P
P
Sub Power button
2. Press Main Power switch to completely turn Off the power of the unit.
OK
The Indicating Lamp Status Check
Indicating Lamp
Status
Off
Power Status
Off
Red
Standby mode
Blinks in Red**
Standby mode
Green
On
Orange
Power Save mode*
Blinks in Orange**
Power Save mode
PH35814
Power Switch Status
Main power → Off
Main power → On
Sub Power button → Off
Standby mode as above
whilst upgrading DTT version and operating
Timer Programming on digital channel.
Main power → On
Sub power button → On
Main power → On
Sub Power button → On
Power Save mode as above
whilst upgrading DTT version and operating
Timer Programming on digital channel.
*About Power Save mode, see “Power Save Mode” and “When Following Messages Appear on the Screen” on
and 70 for details.
**9700 models only
68
NOTE
If the image does not appear on the screen at all, or have any problem, see TROUBLESHOOTING on 70 ~ 72 .
It may help you to solve the problems.
You can turn ON the power only by pressing the Sub Power button during the Standby mode.
Do not switch the power On/Off repeatedly in a short period of time. It could cause malfunction.
To avoid sudden surges of electricity when the power comes back on, turn Off the main power of the unit before you
leave if there is a power cut during use of the unit.
20
BASIC OPERATION (continued)
When you turn ON the TV for the first time, your TV automatically leads to the settings of
“Language,” “Country” and “Auto Tuning.” (Also, refer to the attached Quick Guide.)
Language
1. The first screen appeared will ask you to choose the language of your Analogue TV’s
display.
2. Using
button, select language you preferred from the list and press OK button.
3. Then, using
button, select your residing country and press OK button.
4. The auto tuning screen appears, and your TV will now search analogue channels
through the frequencies storing them in order.
Depending on your residing country, it does not proceed to DTT auto tuning (5~8).
DTT auto tuning process varies according to the model.
ENGLISH
Easy Preset
English
Svenska
Norsk
Suomi
Dansk
Česky
Polski
Magyar
Slovenski
Hrvatski
Select
Return
Exit
This is an example of
32/37LD9700U/N.
Setup
Auto Tuning
Scanning Channel Number: 33
Cancel
OK
Cancel
If you have 32/37LD9700U:
5. The dialogue box will appear to ask you if you wish to tune in the DTT channels and
select “Yes” so that your TV will start searching the DTT channels.
Do you want to start automatic search?
If you have 32/37LD9700C/N:
5. The box appears to ask you to select language for DTT auto tuning.
6. Using
button, select language from the list and press OK button.
7. Then, using
button, select your residing country and press OK button.
8. The dialogue box will appear to ask you if you wish to tune in the DTT channels and
select “Yes” so that your TV will start searching the DTT channels.
NOTE
MENU
DTT auto tuning is not available on 9600 models.
If you want to change the setting after completing this easy preset, press
button
and set up individually.
- See 24 25 about the Analogue setting.
- See 41 about the DTT setting.
Yes
No
AUTOMATIC SEARCH
BBC ONE
BBC TWO
BBC THREE
BBC NEWS 24
BBCi
CBBC Channel
Searching UHF Channel: 61. Please wait. This will take a few minutes.
0%
100%
MENU
Cancel search
21
BASIC OPERATION (continued)
Volume UP/DOWN
1. To increase the sound volume, press
button on the remote control,
or Volume Up button on the control panel.
The Volume Indicator value on the screen will shift right.
2. To decrease the sound volume, press
button on the
remote control or Volume Down button on the control panel.
The Volume Indicator value on the screen will shift left.
Mute button
Mute
1. To mute the sound, press
Volume Up/Down
button
button on the remote control.
The sound of the unit is temporarily turned Off.
The colour of the Volume Indicator will turn into magenta
while muting the volume.
SD MEMORY
CARD
PUSH-EJECT
Volume Up button
P
P
2. To turn the sound back, press button again, or Volume Up button on
either remote control or the control panel.
The colour of the Volume Indicator will turn back to green.
Volume Down button
OK
NOTE
You can decrease the volume by pressing
while the sound is muted.
button
PH35814
Volume 15
The Volume Indicator
22
BASIC OPERATION (continued)
By pressing Input Select button, you can switch the input. (DTT input: 9700 models only)
To watch actual broadcast, press Input Select button on the control panel,
the numeric buttons or Channel Up/Down button on the remote control.
To display the image outputting from the external equipments
connected to each terminal (DTT / TV, AV1~5, HDMI 1 / 2, and RGB),
select corresponding mode.
ENGLISH
Input Switching to TV/AV1~5, HDMI, and RGB
Input Select buttons
1. Press Input Select button on the remote control.
Channel
Up/Down button
2. The Input modes can be also switched by using Input Select button
on the control panel.
Each time this button is pressed, the screen displays corresponding
mode by following order.
DTT
TV
AV1
AV2
SD MEMORY
CARD
PUSH-EJECT
Channel Up button
P
AV3
P
Channel Down button
RGB
HDMI 2
HDMI 1
AV5
AV4
OK
3. To directly go back to TV mode, pressing channel Up/Down button on
either remote control or the control panel.
Also, you can use the numeric buttons on the remote control.
Input Select button
PH35814
Input Signal Screen Display
The input signal status can be displayed on the screen by pressing the
button of
the remote control. (DTT mode: 9700 models only)
The display in DTT mode will also appear as changing the channels and go out in
approximately 3 seconds. Refer to 44 about the information banner.
The display in TV/Video/RGB mode will go out in approximately 6 seconds.
+
Recall
button
DTT
Programme
name
Channel
name
Now: ---Next: ---1.
ABCDE
TV
Off-timer
On-timer
1
ABCDE
OFF
AV1
Composite
OFF
RGB
H : 48.4kHz
V : 60.1 Hz
OFF
TV position
Name
Sound mode
Input mode
Signal mode
-- -- Min.
-- -- : -- --
RGB
Off-timer
On-timer
Broadcasting time
-- -- Min.
-- -- : -- --
VIDEO
Off-timer
On-timer
-- -- : -- -- - -- -- : -- --- -- : -- -- - -- -- : -- -Signal Level:
-- : --
Input mode
Input horizontal frequency
Input vertical frequency
-- -- Min.
-- -- : -- --
23
TV SETUP OPERATION
How to use the On-Screen Display (OSD) system
With the On-Screen Display system, you can access the various kinds of the features and functions in this product.
Picture
Audio
Timer
Function
Setup
Language
Select OK Set
Basic Operation
1. Press
MENU
button on the remote control or Menu button on the control panel
of the unit. The Main Menu is displayed on the screen as shown on the right.
2. To select the item, press
button.
The selected item will be highlighted in Yellow.
<Main Menu>
3. Press OK button to set your selection.
The selected menu page will be displayed on the screen.
SD MEMORY
CARD
Menu button
4. Use
PUSH-EJECT
button to choose the item on the MENU page.
P
Press
5. Use
Press
button to set your selection.
OK
P
button to adjust the item values or choose options.
OK
button to set your selection.
6. To exit from the menu, press
OK
MENU
button.
NOTE
The OSD menu screen will be closed automatically when no operation has
been made for about one minute.
If the item in menu is shown in grey, it means that it cannot be selected or
adjusted.
There is another main menu for DTT setting as shown.
Refer to 40 about DTT main menu. (9700 models only)
Menu button
PH35814
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
<DTT Main Menu>
Language Menu
Select the language from the list so that you can display the OSD menu
in the selected language.
Language
How to set Language
1. Enter the “Language” menu from the Main Menu.
2. Select the appropriate language with cursor from the list.
The selected item will be highlighted in Yellow.
Select
English
Français
Deutsch
Italiano
Español
Nederlands
Eλληνικά
Τϋrkçe
Português
Română
button to exit from the entire OSD menu.
NOTE
24
Return
Language
MENU
This setting is for Analogue OSD language.
As for the DTT OSD language, refer to "System language" on
(9700 models only)
OK Set
For 32/37LD9700U/N
3. Press OK button to set your selection.
The black dot is marked inside of the circle when the selection is fixed.
4. Press
English
Svenska
Norsk
Suomi
Dansk
Česky
Polski
Magyar
Slovenski
Hrvatski
Select
41
.
OK Set
Return
For 32/37LD9700C
* The Analogue OSD language for
9600 models will be one of the
two options shown depending on
country.
TV SETUP OPERATION (continued)
ENGLISH
Setup Menu (TV mode)
With this menu, you can access various kinds of features relating to TV channel settings.
Setup
Auto Tuning
Manual Tuning
Fine Tuning
Sort
Teletext Language
Auto Off
Scart Output
Select OK Set
Selected Items
Off
TV
Return
Setup hint
( Page 1 )
( Page 2 )
Country
( Page 3 )
Auto Tuning
Select the country where you watch TV so that it starts
auto-tuning for appropriate channels.
In case that some of the required channels are missed to
tune in, set the channels with Manual Tuning Operation.
( Page 4 )
Search
Tune the local channels automatically.
Press OK button to start searching.
Position
Press channel up (+) down (-) buttons to input position
number (1~199, AV00) or channel number (C
or S
CH
Search
S
MHz
Off
Descrambler
On
).
Select the channel entry method, and enter the digits for
channel you wish to watch.
Press OK button to start searching.
Set this to Off normally. If it is set to On when selecting
other than DTT in Scart Output, AV1 (Scart) terminal
operates as TV signal output, and the screen changes to
display AV1 (Scart) input signal automatically.
1. Move the cursor to the first digit and select the letters
Manual Tuning
with
button.
2. Move to the next digit with ► button.
Name
3. Press OK button again when you finish inputting all the
letters.
The selectable letters are as follows: “0”~“9”, “A”~“Z”, “+”,
“ ” (blank), “-” (displayed as blank), and “.” (period).
L
L'
Sound
System
BG
Select the sound system from 5 different modes.
I
DK
Information
Use AV00 when connecting equipment such as a VCR via an RF (aerial type) cable.
25
TV SETUP OPERATION (continued)
Setup Menu (TV mode) (continued)
Selected Items
Setup hint
Auto
Colour
System
PAL
SECAM
Select colour system from 5 different modes.
NTSC4.43
NTSC3.58
Manual Tuning
On
It allows you to skip unregistered channels automatically when you
use channel up (+) down (-) button to select channels.
This function will automatically skip unavailable channels when set
to on.
Off
On
The noise on the screen or interference could be reduced,
especially at the area of weak electric field.
Off
Skip
NR
Fine Tuning
-56~+56
► : Increase the frequency data for the main tuner.
◄ : Decrease the frequency data for the main tuner.
You can change the order of channels as follows.
1. Move the cursor to the Channel row you want to change order
and then, press OK button.
2. The colour of the letters on the designated line will be turned
into yellow bracket and with [ ].
Sort
3. Move the designated row by using
4. Press OK button to fix the position.
The most appropriate Teletext Language is automatically selected
depending on the country which you select in Auto Tuning. In case
that the text is not displayed correctly, for example, because of
living near a border, select another area as below.
West Europe : West European countries and Turkey.
(This is normal setting for use in Europe.)
East Europe : East European countries
Russian
: Countries neighboring Russia and East European countries
Farsi
: Middle Eastern countries
Teletext Language
Off
Auto Off
On
DTT
Scart Output
TV
Monitor
26
button.
When no airwave has been received and no operation has
been made for 10 minutes in TV mode, it turns to standby mode
automatically.
AV1 (Scart) will be fixed as the selected mode.
When selecting "Monitor", it is possible to monitor only the
composite video signal from AV2, AV3, AV4, AV5, TV, or DTT input
that is displayed on the screen at the same time.
DTT output from scart is only available on 9700 models.
If "Descrambler" is set to ON when selecting other than DTT, it will
be fixed as "TV" automatically.
TV SETUP OPERATION (continued)
ENGLISH
Setup Menu (AV mode)
With this menu, you can select or adjust the condition of the input signals from each terminal.
Setup
System
Colour System
Video Input
Scart Output
Select
Set
Selected Items
System 1
TV
Return
Setup hint
Do not change the original setting.
(System1: Europe/Asia, System2:North America)
Composite and S-video input only.
System 1
System
System 2
Auto
PAL
System 1
SECAM
NTSC4.43
Colour
system
NTSC3.58
AV1~AV5
Auto
System 2
NTSC-M
Select the colour system depending on the input signal.
Generally, select [Auto].
In case that the input signal has too much noise, the
signal level is too low, or the operation is unstable in
[Auto], select the system according to the colour system
of the input signal.
Composite and S-video input only.
PAL-M
PAL-N
S.Video
AV1
Composite
Video
Input
Auto
AV4
HDTV
SDTV/DVD
DTT
Scart
Output
TV
Monitor
For AV1 : Select depending on the type of input signal.
The default setting is [Composite].
Select [S.Video] when you want to watch S.Video image.
For AV4 : Select the colorimetry depending on the input
signal.
Generally, select [Auto].
In case that the colour is not displayed correctly, select
[HDTV] or [SDTV/DVD] to match the input signal.
Component Input only.
AV1 (Scart) will be fixed as the selected mode.
When selecting "Monitor", it is possible to monitor only
the composite video signal from AV2, AV3, AV4, AV5, TV,
or DTT input that is displayed on the screen at the same
time.
DTT output from scart is only available on 9700 models.
If "Descrambler" is set to ON when selecting other than
DTT, it will be fixed as "TV" automatically.
27
TV SETUP OPERATION (continued)
Setup Menu (RGB mode)
With this menu, you can adjust the display condition of the image which is inputting from the RGB terminals.
By pressing ▼button at the bottom of the 1st Setup menu page, the 2nd Setup menu page will appear on the screen.
Setup
Auto Adjust
Adjust
Horizontal Position
0
Vertical Position
+31
Horizontal Clock
–20
Clock Phase
10
Reset
Reset
Select
Return
Exit
Selected Items
0.7V
Off
Off
Off
On
PC
Return
Setup hint
Adjust Horizontal Position, Vertical Position, Horizontal
Clock, and Clock Phase automatically.
Press OK button to start auto adjustment.
The message “Auto Adjusting” is displayed.
Depending on the type of the signal, there is a possibility
that the display may not be adjusted in its optimum
condition with this function. In that case, please adjust
each item manually.
Auto Adjust
Horizontal Position*
-63~+63
Adjust the display position horizontally.
When the position exceeds the possible range, the
display colour will turn into Magenta.
Vertical Position*
-31~+31
Adjust the display position vertically.
When the position exceeds the possible range, the
display colour will turn into Magenta.
Horizontal Clock*
-31~+31
Minimize the vertical stripes on the screen.
Clock Phase*
Reset
28
Setup
Input Level
Frequency Display
WVGA Type
WXGA Mode
Vertical Filter
Frequency Mode
Select
Set
0~63
Minimize the blurring of the letters and stripes on horizontal row.
Make sure to adjust Horizontal Clock first before
adjusting Clock Phase.
Reset all the set values on this Menu page to original
factory settings.
TV SETUP OPERATION (continued)
Selected Items
Setup hint
0.7V
Input Level
1.0V
Off
Frequency Display
On
Off
WVGA Type
On
Off
1280x768
1366x768
Off
On
PC
Movie
WXGA Mode
Vertical Filter
Frequency Mode
ENGLISH
Setup Menu (RGB mode) (continued)
Normally, select [0.7V].
Select [1.0V] only when the whole display becomes too
white.
Select whether indicating the PC signal frequency information on Input Signal Screen Display or not.
It allows you to switch display size to [Full] and [Real]. (See
“Size Switching” on 55 for the details.)
This function is available only for WVGA signal.
Refer to “Recommended Signal List” on
75 .
This function is available only for WXGA signal.
Refer to “Recommended Signal List” on
75 .
Reduce the flickers on the screen when set to [On].
This mode is not available. (It is shown in grey.)
Information
The items indicated by “ ” can be automatically stored depending on the signal mode.
The signal mode is identified by the Horizontal/Vertical frequency and the sync. signal polarity, which has almost
same values in all the above items might be regarded as the same signal.
The item “Auto Adjust” cannot be stored. Press OK button to start auto adjustment as needed.
*
29
TV SETUP OPERATION (continued)
Function Menu
This menu provides various ways to protect your panel, reduce power consumption, and set up utilizing the useful
functions, such as Freeze Mode and Photo Input.
Function
Black Side Panel
Video Power Save
Freeze Mode
Default Zoom
Reset
Select
Set
Selected Items
Black Side Panel
On
Off
Video Power Save
On
Split
Default Zoom
Reset
30
Function
Background
Slide Effect
Slide Interval
Slide Music
Slide Mode
Reset
Select
Set
1
1
5Sec.
Off
1
Reset
Return
Return
Setup hint
Off
Freeze Mode
Off
Off
Split
Panoramic
Reset
Strobe
Panoramic
4:3
Full
14:9zoom
This can change the colour of sidebars showing up in
normal mode. (Off:grey, On:black)
Please note that it is not available while operating Photo
Input function.
During AV input, this helps to reduce power consumption
when there is no video signal. In case of selecting AV
input terminal which does not have signal input, it changes
the power status to power save mode in AV4 and standby
mode in other AV input. (See 68 in details.)
This is the useful function to watch the program in both
still and active pictures. (See 60 in details.)
Split: half sized images
Strobe: thumbnail sized images
You can set the display size for TV / AV input screen
appearing first when turning the main power On.
Each item on this menu screen can be restored to the
original factory settings by pressing OK button.
TV SETUP OPERATION (continued)
Selected Items
Background
Setup hint
1
2
Off
Slide Effect
1
2
5Sec.
Slide Interval
10Sec.
30Sec.
Slide Music
Slide Mode
Reset
ENGLISH
Function Menu (continued)
Off
1
2
1
2
This is available only for Photo Input function. Switch the
pattern of background. See details on 65 .
This is available only for Photo Input function. You can
select the method of switching slides during slide show.
See details on 63 .
This is available only for Photo Input function. You can
select the interval time for switching slides during slide
show. See details on 63 .
This is available only for Photo Input function. You can
select the preferred Background Music during slide show.
See details on 63 .
This is available only for Photo Input function. You can
select where to start the slide show. See details on 63 .
Each item on this menu screen can be restored to the
original factory settings by pressing OK button.
31
TV SETUP OPERATION (continued)
Picture Menu (TV/AV mode)
In this menu, you can make specific adjustments for the picture based on your preference.
By pressing ▼button at the bottom of each menu page, the next Picture menu page will appear on the screen.
Picture
Picture Mode
Natural
Contrast
+31
Brightness
–31
0
Colour
Sharpness
+15
0
Hue
Colour Temperature Normal
Contrast Mode
Normal
Back Light
+20
Reset
Reset
Select OK Set
Return
Picture
YNR
CNR
Film Mode
3D Comb Filter
LTI
CTI
Black Enhancement
Auto Colour
Reset
Select OK Set
Natural
Off
Off
On
Off
Off
Off
Off
Off
Reset
Return
Selected Items
Natural
Return
Setup hint
Dynamic
Picture Mode
Picture
Colour Temp. Adjust
Colour Management
Colour Decoding
Select OK Set
Natural
Cinema
You can make the best selection from 3 modes depending
on the lighting condition and intended use.
Dynamic: Suitable for the brighter conditions.
Natural : Suitable for the normal lighting condition.
Cinema : Suitable for watching movie.
This adjusts the contrast to meet the lighting environment
Contrast*
-31~+31
(+32~+40)
by using
button.
The maximum value can be extended to [+40] by
pressing and holding ► button at [+31], which changes
the colour between those numbers from yellow to
magenta. This is the special feature prepared for the
dark scene. At the normal condition, it is recommended
to set the value less than [+31].
With this function, black is adjusted to change the overall
Brightness*
-31~+31
Colour*
-31~+31
Sharpness*
-15~+15
Preferred sharpness can be adjusted by pressing ◄
button for Softer image or ► button for Sharper image.
-31~+31
Pressing ◄ button enhances red and weakens green,
while pressing ► button weakens red and enhances
green. The setup hint is adjusting for the realistic skin
colour.
brightness by using
button.
It can adjust colour density based on your preference by
Hue*
Colour Temperature*
32
Cool
Normal
Warm
Black/White
using
button.
You can select from 4 settings (default) depending on the
colour condition with
button.
TV SETUP OPERATION (continued)
Selected Items
Setup hint
Dynamic
Contrast Mode*
Normal
Auto
Back Light
ENGLISH
Picture Menu (TV/AV mode) (continued)
-20~+20
It allows you to choose from 3 modes.
Dynamic: Sharpen the gradation to improve the contrast
feeling.
Normal: Reproduce as faithful gradation as possible.
Auto: Adjust to natural brightness without blurred white by
detecting the bright parts on images.
Adjust the brightness of the Back Light for the maximum
visibility.
Each item on this menu screen can be restored to the
original factory settings by pressing OK button.
Reset
Off
YNR*
CNR*
Low
High
Off
Low
High
This is a noise reduction system for picture signal.
This is a noise reduction system for colour signal.
Off
Film Mode*
On
Off
3D Comb Filter*
LTI*
CTI*
Black Enhancement*
Low
High
Off
Low
Middle
High
Off
Low
Middle
High
Off
Low
Middle
High
Off
Auto Colour*
Reset
On
On: Automatically identify if it is the movie film and
faithfully reproduces the original film images.
Off: Set to Off if the image does not look natural.
This is available only when receiving NTSC/PAL
composite signal. This reduces the dot and colour blurring
in minute scales so that it can reproduce purer colour.
Adjusts the sharpness of the picture signals.
Adjusts the sharpness of the colour signal.
Adjusts the black level compensation.
This monitors and adjusts the colour to maintain constant
colour levels. It also maintains natural flesh tones while
preserving fidelity of background colours. This is available
only when receiving an NTSC composite and S.Video
signal.
Each item on this menu screen can be restored to the
original factory settings by pressing OK button.
33
TV SETUP OPERATION (continued)
Picture Menu (TV/AV mode) (continued)
Selected Items
Setup hint
Amplitude
Red
Green
Colour Temp. Adjust**
On
Blue
Cut off
Red
Green
Blue
On: When you want to set specific adjustments in each of
the 4 Colour Temperature modes. You can adjust on
the amplitude and cut off. The settings reflect on the
Colour Temperature.
Amplitude: subdue the following colours on the
brighter parts.
Cut off
: subdue the following colours on the darker
parts.
Off: Remains as default setting.
Off
Magenta
Red
Colour Management**
On
Yellow
Green
Cyan
On: Turn On to adjust the balance of each colours
depending on the user’s preference. The settings
reflect in each of the 4 Colour Temperature modes.
Off: Remains as default setting.
Blue
Off
RGB/R/G/B
Red**
Green**
Colour Decoding
Colour*
Hue*
This can adjust R/G/B level and Hue to make the colour
appear naturally for the user’s appearance.
First, select RGB (multiple colour screen) or R/G/B(single
colour screens) to check the colour decoding effects while
adjusting. Then, you can adjust the level of colour (red
and green), colour intensity, and Hue. Press OK button
to save the setting. The settings reflect in each of the 4
Colour Temperature modes.
Information
The items indicated by “ ” can be stored the setting for each of inputs and picture modes (Dynamic/Natural/Cinema).
You can enjoy different setting depending on the selected input such as VCR in AV1.
*
In addition, the items indicated by “
34
**” can be stored for each of colour temperature modes.
TV SETUP OPERATION (continued)
ENGLISH
Picture Menu (RGB mode)
In this menu, you can make specific adjustments for the RGB picture based on your preference.
Picture
Contrast
Brightness
Colour
Hue
Picture Enhancement
Colour Temperature
Colour Temp. Adjust
Back Light
Reset
Select OK Set
Selected Items
: +31
: –31
: 0
: +31
: Off
: Normal
: +20
Reset
Return
Setup hint
This adjusts the contrast to meet the lighting environment
Contrast
-31~+31
(+32~+40)
by using
button.
The maximum value of the menu display can be
extended to [+40] by pressing and holding ► button at
[+31], which changes the colour between those numbers
from yellow to magenta. This is the special feature
prepared for the dark scene. At normal condition, it is
recommended to set the value less than [+31].
Brightness
-31~+31
Adjust according to personal preference by using
button.
Colour
-31~+31
Adjust according to personal preference by using
button.
-15~+15
Pressing ◄ button enhances red and weakens green,
while pressing ► button weakens red and enhances
green. The setup hint is adjusting for the realistic skin
colour.
Hue
Off
Picture Enhancement
Low
Middle
You can select the preferred sharpness on detailed parts.
High
Cool
Colour Temperature
Normal
Warm
You can select from 4 settings (default) depending on the
lighting condition with
button.
Black/White
35
TV SETUP OPERATION (continued)
Picture menu (RGB mode) (continued)
Selected Items
Setup hint
Amplitude
Red
Green
Blue
Colour Temp. Adjust.**
On
Cut off
Red
Green
Blue
On: When you want to set specific adjustments in each of
the 4 Colour Temperature modes. You can adjust on
the amplitude and cut off. The settings reflect on the
Colour Temperature.
Amplitude: subdue the following colours on the
brighter parts.
Cut off
: subdue the following colours on the darker
parts.
Off: Remains as default setting.
Off
Back Light
Reset
-20~+20
Adjust the brightness of the Back Light for the maximum
visibility.
Each item on this menu screen can be restored to the original factory settings
by pressing OK button.
Information
There is a useful function to automatically store the setting on menu in almost every item so that you do not have to
reset every time. Furthermore, the following items can be stored more specifically.
In addition, the items indicated by “
36
**” can be stored the setting for each of colour temperature modes.
TV SETUP OPERATION (continued)
ENGLISH
Audio Menu
With this menu, you can adjust and customize the audio condition as you like.
You can move on to the next menu screen by pressing ▼button at the bottom.
Audio
Audio Mode
Treble
Bass
Balance
SRS
TruBass
BBE
Perfect Volume
Internal Speaker
Reset
Select
Set
: Movie
: +15
: –15
R
: 0L
: Normal
: Low
: Low
: Off
: On
Reset
Return
Selected Items
Setup hint
Movie
Audio Mode
Audio
Head Phone Volume : +20
Head Phone Select
: A/B
Select
Adjust
Return
Music
Speech
Favourite
You can select the most suitable sound condition from 4
alternatives according to the contents.
If you want to adjust each item value based on your
preference, select “Favourite”.
Treble**
-15~+15
Adjust the Treble.
Bass**
-15~+15
Adjust the Bass.
Balance
-10~+10
Adjust the balance of the sound from right and left speakers.
Off
SRS
Normal
This system gives you the dynamic 3D sound. Select it
depending on your preference.
Wide
Off
TruBass
Low
TruBass gives you the enchanced bass sound.
Select it depending on your preference.
High
Off
BBE
Low
High
Perfect Volume**
Off
BBE High Definition Sound restores clarity and presence
for better speech intelligibility and musical realism.
Select it depending on your preference.
It will automatically adjust the volume to its average level
each time you change the channel.
On
Off
Internal Speaker
On
Reset
This needs to be switched to Off when you want to take
audio from external epuipment.
It is normally set to On when you operate the set using
the built in speakers.
Reset all the set values on this Menu Page to the original
factory settings.
37
TV SETUP OPERATION (continued)
Audio Menu (continued)
Selected Items
Headphone Volume
Setup hint
0~63
A/B
Headphone Select
B
It allows you to adjust the volume of the headphone. The
sound from the speaker will automatically set to MUTE
when the headphone is connected to the terminal.
Select either side of the display that you want to hear the
sound with headphone during 2-picture mode.
(See “Multi Picture Mode” on 56 )
A/B : You can select either side A (left side) or side
B (right side) which the sound comes into the
headphone. The speaker icon will be displayed on
the side you select.
B : You will hear the sound only from the side B (right
side) of the display.
NOTE
The headphone output is NOT available when the image from the RGB or Photo Input is on the screen.
Information
There is a useful function to automatically store the setting on menu in almost every item so that you do not have to
reset every time. Furthermore, the following items can be stored more specifically.
The items indicated by “
**” can be stored the setting for each of Audio Mode.
Timer Menu
This allows the unit to turn Off (Standby mode) or On at set time automatically, which you may find useful.
Timer
Off Timer
On Timer
Select
Selected Items
: 30Min.
: -- : - Adjust
Return
Setup hint
--Min.
30Min.
Off Timer
60Min.
This function automatically sets the power to Standby
mode when the selected time period has elapsed.
90Min.
120Min.
On Timer
--:--
This function automatically sets the power from standby
mode to On when the specified time period has elapsed.
Input the desired time within the range of 00:00 to 11:59
by using
38
button on the remote control.
TV SETUP OPERATION (continued)
Analogue Teletext
ENGLISH
12 : 34 : 56
Page Number
How to operate the Teletext
You can display the Teletext simply by pressing the remote
control buttons.
Link pages
NOTE
Select Teletext language from Setup Menu shown on
26
.
Red
Operation
To activate Teletext mode.
To exit from the Teletext mode.
To split the screen into two and watch both Teletext information
and actual broadcast at the same time.
Press again to watch Teletext on a single screen.
Green
Yellow
Blue
Press
[TVÙText]
[TextÙTV+Text]
To display Index page.
[Index]
To access Subtitle service directly (if the channel has the Subtitle
service broadcasting).
To display Hidden text.
ex. The answers of the Quiz or the Game page.
Press again to close the revealed answer.
To return to actual broadcast temporarily while searching for the
Teletext page you request.
When the search is done, the designated page # will be displayed
on the upper left of the screen.
Press again to return to Teletext page.
To access the link pages which are displayed at the bottom of the page.
(Select the buttons corresponding to the colours of the letters on
screen.)
To hold the text picture.
[Subtitle]
?
[Reveal]
X
[Cancel]
[Colour]
2-4-12
[Hold]
Information
Each time the
button is pressed, the screen will be switched from double screen to signal screen.
Some Teletext pages do not display Link Pages at the bottom of the screen. Press
button to display them.
39
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION
Digital Terrestrial Television (DTT) operation is not available on 9600 models.
How to use the On-Screen Display (OSD) system
With the On-Screen Display system, you can access the various kinds of the features and functions in this product.
Basic Operation
1. Press
Main Menu
Channel List
Installation
Configuration
Timers
Language
TV Setup
Common Interface
MENU
button on the remote control or Menu button on the control panel
of the unit. The DTT Main Menu is displayed on the screen as shown on the
right.
2. To select the item, press
button.
The selected item will be highlighted in Yellow.
<DTT Main Menu>
*This is the example of 32/37LD9700U.
button to set your selection.
3. Press
The selected menu page will be displayed on the screen.
OK
4. Use
button to choose the item on the MENU page.
Press
OK
5. Use
button to set your selection.
Menu button
button to adjust the item values or choose options.
Press
OK
button to set your selection.
6. To exit from the menu, press
MENU
button.
NOTE
The OSD menu screen will be closed automatically when no operation has
been made for about one minute.
SD MEMORY
CARD
PUSH-EJECT
Menu button
P
About DTT Function
P
Please note that the DTT function of your television has several differences
depending on the model and service of each country. Check the reference page
for the details.
Menu / Function
Difference
Page
Channels (Channel List)
For 32/37LD9700C/N, "Channels" appears
in the main menu, and "Channel List" can
be selected from "Channels" menu. For
32/37LD9700U, "Channel List" appears in the
main menu.
24
40
42
43
48
Channel Sort
Available only for 32/37LD9700C/N.
43
Country
The preferred country can be selected from 41
"Country" only for 32/37LD9700C/N.
OK
1. OSD
Audio Language
Subtitle
The selectable items from the menu are 47
different.
47
2. Service
Receiver Upgrade
49
Digital Teletext
44
Electric Programme Guide (EPG)
Timer programming
40
Depends on the service of each country.
45
46
PH35814
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
If you want to change the setting after completing the easy preset, set up individually as follow. Refer to
the easy preset.
21
ENGLISH
Changing Preset
about
Re-Installing DTT channels
Reset to the factory setting.
Your previous digital channel list will be erased.
Are you sure you want to delete all digital channels
and settings for first time installation?
MENU
1. Press
button on the remote control.
2. Select "Installation" on the DTT main menu.
3. Select "First Time Installation".
4. Select the preferred language by using
press
OK
No
Yes
button and
button. (32/37LD9700C/N only)
5. Select the country where you watch by using
button and press
6. The message appears as shown. Press "Yes".
OK
button. (32/37LD9700C/N only)
Searching for New Channels.
MENU
1. Press
button on the remote control.
2. Select "lnstallation" on the DTT main menu.
3. Select "Add New Channels".
4. Choose either "Automatic Search" or "Manual Search". ("Automatic Search" (recommended)
searches through all available broadcast frequencies for free-to-air channels whereas "Manual Search" searches
on a single broadcast frequency.)
Changing System Language (OSD) and Country
MENU
If you want to change the setting after completing Easy Preset process, press
button to set up individually.
●System Language
You can select your preferred OSD language on DTT mode.
CONFIGURATION
MENU
System Language
Country
Audio Language
Subtitle
Favourite Mode
Receiver Upgrade
Parental Settings
button on the remote control.
1. Press
2. Select “Configuration” on the DTT main menu.
3. Select “System language.”
4. Select the language by using
button on the remote control.
button and press
English
France
English
Off
Off
C-V.1.0
OK
For 32/37LD9700U/C
English ↔ Français ↔ Deutsch ↔ Italiano ↔ Español
(English) (French) (German) (Italian) (Spanish)
Change Default System Language
For 32/37LD9700N
English ↔ Svenska ↔ Dansk ↔ Suomi
(English) (Swedish) (Danish) (Finnish)
i+
More
* The item “Country” appears only for 32/37LD9700C.
●Country (only for 32/37LD9700C/N)
Select the country where you watch TV. It will have an effect on the tuning.
MENU
button on the remote control.
1. Press
2. Select “Configuration” on the DTT main menu.
3. Select “Country”.
4. Select the country by using
button on the remote control.
For 32/37LD9700C
France ↔ Germany ↔ Spain ↔ Italy
For 32/37LD9700N
Sweden ↔ Denmark ↔ Finland
41
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Channel Selections
There are 4 ways to select the channels: stepping through the channel, selecting by number, selecting from the onscreen channel list, and using the Electronic Programme Guide (EPG).
Stepping through the Channel
Press CHANNEL UP/DOWN button to switch the next or previous channel on the list. Information banner is displayed
every time channel is switched.
Refer to 44 about the information banner.
Selecting from the On-screen Channel List
Selecting from the On-screen Channel List
MENU
CHANNEL LIST
1
BBC ONE
1. BBC ONE
1. Press
button on the remote control.
2. Select “Channel List” (from “Channels” if your TV is
32/37LD9700C).
2. BBC TWO
3. ITV 1
4. Channel 4
6. ITV 2
3. Use
button to move through the list, and RED/GREEN to
display next or previous page.
7. BBC THREE
9. Teletext
10. BBC FOUR
OK
button to select the channel, along with a quarter
4. Press
screen image of the selected channel.
11. Sky Travel
12. UKHistory
MENU
5. Press
Select
button again to return the normal full screen.
Function
Delete
Edit Name
Select Channel
Lock
OK
Watch
Favourites
i+ More
Selecting by Number
Enter the number based on its channel list by the numeric buttons on the remote
control. A small box appears in the upper left corner of the screen to show entered
number. Channel is switched along with the information banner. If the entered
number is not valid for one of the setup channels, it automatically selects the
closest channel.
40
Using the Electronic Programme Guide (EPG)
Press
button to access EPG screen.
The EPG screen displays a list of the stored channels (5 channels per page) along with the description of the
programme being broadcast.
To change channels, use
Refer to
45
and RED/GREEN buttons and then
OK
button.
regarding Electronic Programme Guide for details.
NOTE
Please note that DTT menu and Teletext image (without picture) cannot be supported at the same time. (Audio and
picture are available.)
The followings are the examples.
• If the quarter images on EPG or Channel List screen is from Teletext, those images cannot be displayed.
• If you try to display the menu whilst displaying Teletext (without picture), the teletext screen becomes unavailable.
42
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
If your TV is 32/37LD9700C in Spain, Germany, or Italy and 32/37LD9700N in
Denmark, you can sort the channels manually as you want. (The channels in UK,
France, Sweden and Finland will be automatically sorted when installing.)
MENU
ENGLISH
Channel Sort
CHANNEL SORT
1. WDR
2. FAB
3. BBC World
4. Südwest BW/RP
1. Press
button.
2. Select “Channels” on the DTT main menu.
3. To sort the channels, select “Channel Sort” by pressing
4. Select the channel you wish to sort with
5. Using
button.
OK
button.
button and then press
OK
button.
button, shift the channel to the preferred position and press
Select Channel
i+ More
Set
OK
OK
Channel Editing
MENU
CHANNEL LIST
1. Press
button on the remote control.
2. Select “Channel List” (from “Channels” if your TV is
32/37LD9700C/N) on the DTT main menu.
3. ITV 1
4. Channel 4
6. ITV 2
7. BBC THREE
9. Teletext
10. BBC FOUR
11. Sky Travel
12. UKHistory
Select
4. Then, using
button to select one of the buttons at the
bottom of screen depending on the needs.
Functions
Delete the unwanted channel.
Delete
Function
character appears. Use
Edit Name
Lock the channel with the code.
Lock
Set as a favourite channel.
Only selected channels will appear
Favourites
when using
button on the remote
control to change channel.
OK
Delete
Edit Name
Select Channel
Lock
OK
Favourites
Watch
i+ More
Procedures
The warning message shows up to confirm the
deletion.
The channel name highlighted with the first
Rename the channel.
5. Press
BBC ONE
2. BBC TWO
3. To edit the channel, highlight the required channel with
button.
Button
1
1. BBC ONE
button to select each
button changes
of character. Then, pressing
the highlighted characters
(ex. UP key : a → b, DOWN key : b → a).
Numeric buttons can be also used to replace the
highlighted character. Refer to the “Character
Input” table as shown below for details.
The password dialogue is displayed.
Enter the parental Lock code.
Refer to 48 regarding the parental Lock code.
The icon ( ) appears to identify it as the favourite
channel.
To activate this setting, Favourite Mode needs to
be turned ON from the Configuration menu. (See
49 for Favourite Mode.)
button to save the change.
MENU
6. Press
button to return to normal broadcast viewing.
Character Input : You can edit the name of channel by using numeric buttons of remote control as below.
Numeric
buttons
1
2
3
4
5
6
7
8
9
0
Character
ABC
1
abc
DEF
2
def
GHI
3
ghi
JKL
4
jkl
MNO
5
mno
PQR
6
pqr
STU
7
stu
VWX
8
vwx
YZ
9
yz&.
Blank
0
+-*/!
* By pressing
button, further characters and punctuation marks can be selected besides all of the above.
43
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Utilizing the Infomation Tool
Information Banner
Whenever the channels are changed using the
button or numeric
buttons, the TV displays the picture along with an information banner at the
bottom of screen for approximately 3 seconds. The information banner also
16:10-16:35
16:35-17:00
Now: 50/50
Next: Ace Lightning
Signal Level:
1.
19:28
BBC ONE
button whilst watching DTT. Press it again to return
appears by pressing
to normal viewing screen.
Digital Teletext
(32/37LD9700U only)
Teletext can provide various information with text on the
screen.
• Press
button to access. Press it again to return to the
normal screen.
• You can also access Teletext screen by pressing RED
button, depending on the programme being broadcast.
At the time, Press RED box might appear on the upper
right corner on the screen.
• Digital teletext and subtitles cannot be activated at the
same time.
Subtitle should be turned off to activate teletext.
• If you try to activate teletext during subtitles ON, the
dialogue box appears to ask you to turn subtitles off as
shown.
B B C Weather
03:01 15 Sep
Weather
UK Outlook
Regional 24 Hour Forecast
Regional 5 Day Forecast
World Cities
BBC ONE
Press TEXT to exit
Press 0 for full screen TV
HOME
SHORTCUTS
This switches the receiver between the TV mode and
TELETEXT mode.
Use this to access a subtitle service directly rather than
through a TELETEXT service (subject to subtitle service
broadcasting).
Each of these buttons selects a link page displayed at
the lower part of the screen.
BBCi MENU
BBC1
Interactive services cannot be used
while subtitles are on. Would you like
to turn subtitles off now?
Yes
Operation
BACK
No
Press
[TV TEXT]
[Subtitle]
[Colour]
NOTE
When you are asked to press SELECT in the menu of digital teletext, press
OK
NOTE
The service of digital broadcasting signal varies depending on the country.
Therefore, the Teletext for 32/37LD9700C/N is displayed as Analogue Teletext.
See 39 how to operate at Analogue Teletext mode.
44
button on the remote control.
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
ENGLISH
Utilizing the Infomation Tool (continued)
Electronic Programme Guide (EPG)
Like the Channel Lists, the EPG screen displays a list of the stored channels along with information on what
programmes are being broadcast. You will have either 7 days EPG or Now and Next EPG if the service is available.
7days EPG
1. Press
button to display EPG screen.
2. Select channels with
button.
3. Show programmes on channels in 7days by the following
colour buttons.
RED; Time backward
GREEN; Time forward
YELLOW; Day backward
BLUE; Day forward
button and then
4. Select desired programme using
button. The description of desired programme shows up if
available.
ELECTRONIC PROGRAMME GUIDE (7 Day)
Tuesday 29/3 15:37
Clifford the Big Red Dog
15:25-15:40
CBeebies. King Mac: When T-Bone thinks he is responsible for getting
Mac in trouble, he goes overboard to help Mac in any way he can. But
Mac takes advantage of his friend’s guilt.
Channels
Programmes on Tuesday 29/3, 15:00 - 17:00
1. BBC ONE
2. BBC TWO
3. ITV1
4. Channel 4
5. five
6. ITV2
7. BBC THREE
14:35 Murder, She Wrote
15:20 BBC News
15:25 Clifford the Big Red Dog (Now)
15:40 Arthur
16:05 Planet Cook
16:25 BB3B
16:45 Tracy Beaker
Navigate
Change Time
Change Day
i+ More
MENU
5. Press
button to switch between “7 days EPG” and “Now
and Next EPG”.
Now and Next EPG
1. Change to “Now and Next EPG” from “7 Days EPG” menu
ELECTRONIC PROGRAMME GUIDE
40
BBC NEWS 24
AS Guru: General Studie... 03:00-04:00
MENU
with
key.
2. Select the page containing desired channel with RED
or GREEN buttons and the desired channel using
button.
3. Select Current Event or Next Event using
button.
4. The detailed description of programme shows up if
available. If it is too long to fit into the text window, use
YELLOW or BLUE buttons to see it.
A General Studies programmes for AS
Level students, looks at Culture Arts
and Humanities
Channels
Current Event
Next Event
1. BBC ONE
2. BBC TWO
7. BBC THREE
30. CBBC Channel
40. BBC NEWS 24
Star Sale
AS Guru: General Studie...
George Michael’s Millions
This is CBBC!
BBC News
BBC News 24
AS Guru: General Studie...
Two Pints of Lager and...
This is CBBC
Asia Today
Navigate
Press
button again to return to the normal screen.
Timmer Programming is available among the programmes in the future. See
46
Next Event
OK
Watch
i+ More
in details.
NOTE
• Not all channels broadcast all programme information data. Some channels do not provide programme name and
details. In that case, only channel names are displayed.
• The 7 day EPG function may not be available in all countries or broadcasts.
• For 32/37LD9700C/N, “Now and Next EPG” will be displayed first by pressing
More Information Display
Each of the menu pages and EPG pages has i+ More displays
at the bottom of the page.
By pressing
button whilst displaying those pages, a box
appears showing how to proceed the next step.
Press it again to exit the display.
+
button.
Press UP/DOWN to navigate,
OK to watch the highlighted channel,
RIGHT to toggle to the next event,
RED/GREEN to scroll page up/down,
MENU to view 7 Day EPG.
i+ Exit Help
[Example : Now and Next EPG]
45
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Timer Programming
Timer Programming is available to not only record multiple programmes but also remind you that the desired
programme is about to start whilst you are watching another channel.
From “Timers” Menu
PROGRAMME TIMERS
You can record multiple programmes from “Timers Menu”.
MENU
1. Press
button on the remote control.
2. Select “Timers” from the DTT main menu.
3. Highlight the item on the row of “Mode” using
4. Press
OK
button.
No
Channel Name
Start
End
Date
Mode
1.
2.
3.
4.
5.
6.
7.
8.
ITV 1
BBC TWO
BBC THREE
BBC ONE
BBC ONE
BBC ONE
BBC ONE
BBC ONE
20:00
08:00
10:00
01:00
01:00
01:00
01:00
01:00
21:00
09:00
11:00
01:00
01:00
01:00
01:00
01:00
12/05/2006
12/06/2006
12/06/2006
01/01/2006
01/01/2006
01/01/2006
01/01/2006
01/01/2006
Active
Active
Active
Inactive
Inactive
Inactive
Inactive
Inactive
button to display the timer entry window.
19:54
11/05/2005
5. Set channel name using
button.
6. Set Start Time, End Time, and Date with the numeric buttons.
7. Set the frequency mode (Once, Daily, or Weekly) using
button.
MENU
8. Press
button to return to the Timer Screen. The mode will
automatically be set to “Active” if time and date are valid. (The
message “Entered time is not valid” is displayed if invalid and
“Please choose a date and time in the future” is displayed if
not input.).
Toggle Mode
Name:
Start:
End:
Date:
Mode:
MENU
Exit
OK
Edit Timer
i+ More
3. ITV 1
20:00
[2] 1:00
12/05/2006
Once
MENU
9. Press
button or OK button to set up.
10.The message appears to ask “Switching to timer channel”
to remind you that the selected programme is about to start. If
in menu operation or displaying other than channel programme
screen, the message “A programme that you set a timer for
has started. Would you like to switch to [channel name]?” is
displayed.
* The selected channel can be watched or recorded via Scart 1
Output. Refer to 15 for the details.
From EPG Screen
If you find the programme you wish to record on EPG screen, you can directly set the timer from EPG screen.
1. Press
button to display EPG menu.
2. Using
3. Press
button, select the programme you wish to record.
OK
button so that it leads to the Timers menu screen.
4. After confirming the setting, press
button to return to EPG screen.
NOTE
• Timer Programming can be set until 31, Dec 2037.
• You can set timers up to 8 programmes in total. If you try to set more than that, the box will ask you to deactivate
one of them.
• A timer can not be set if it is overlapped with another. The box will appear if there is an overlap timer.
46
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
ENGLISH
Configuring the Setting
Setting Audio and Subtitle Language
The available audio and subtitle languages can be checked from “Language” menu. Then, you can set your
preferred language from “Configuration” menu as below.
Audio Language
CONFIGURATION
MENU
1. Press
button on the remote control.
2. Select “Configuration” on the DTT main menu.
3. Select “Audio Language” to highlight it.
4. Use
button to select the language.
For 32/37LD9700U
English
Welsh
System Language
English
Audio Language
English
Subtitle
Off
Favourite Mode
Off
Receiver Upgrade
C-V.1.0
Parental Settings
Gaelic
Change Default Audio Language
For 32/37LD9700C
English
French
German
Italian
For 32/37LD9700N
English
Swedish
Danish
Finnish
i+ More
Spanish
Subtitle
MENU
1. Press
button on the remote control.
2. Select “Configuration” on the DTT main menu.
3. Select “Subtitle” to highlight it.
4. Use
button to select other than “Off” in order to be activated.
For 32/37LD9700U
Off
English
Welsh
For 32/37LD9700C
English
Off
French
German
Italian
For 32/37LD9700N
Off
English
Swedish
Danish
Finnish
Gaelic
You also can turn subtitles On/Off by pressing
Spanish
button.
47
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Configuring the Setting (continued)
Setting the Protection
There are various kinds of protection to avoid certain operations: Channel Lock and Menu Lock (Main Menu Lock
and Installation Lock).
Set Lock Key
To use the locks effectively, do change the PIN code from the factory default setting, which should be known and
remembered only by you. The default setting is 0000.
MENU
button on the remote control.
1. Press
2. Select “Configuration” on the DTT main menu.
3. Select “Parental Setting”
4. A box asking for the Lock key is displayed. Enter the current PIN code.
5. From the next box appeared, select “Set Lock Key”
Menu Lock
Installation
Set Lock Key
6. Enter new password twice.
Lock Key
****
Confirm
MENU
button to return to normal viewing in order to activate the lock.
7. Press
Channel Lock
With Channel Lock, any channel can be locked so that it cannot be selected for viewing without four digits PIN
code(See above).
MENU
1. Press
button on the remote control.
2. Select “Channel List” (from “Channels” if your TV is 32/37LD9700C).
3. Highlight the channel which you want to lock with
button.
Lock
4. Select
button at the botton of screen with
button.
5. Press
OK
button to set up and enter Pin Number.
MENU
button to activate it.
6. Press
Menu Lock
<Installation Menu Lock>
If re-installing the complete channel list, “Channel Lock” loses its effect. To avoid this, “Installation Menu Lock” can be
set.
MENU
1. Press
button on the remote control.
2. Select “Configuration” from the DTT main menu.
3. Select “Parental Settings” on the configuration menu.
4. The dialogue box appears to enter the lock key.
5. Another dialogue box is displayed as shown.
6. Highlight “Menu Lock” and use button to select “Installation”.
Menu Lock
Installation
Set Lock Key
7. Return to the normal TV viewing to activate it.
48
<Main Menu Lock>
This locks out the complete menu system. Main menu is only available with the PIN code. Without the code, the user
cannot add, delete, rename, move channels, and set timers.
To activate “Main Menu Lock”, follow the same steps except #6 selecting “Main Menu” instead of
“Installation”.
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
ENGLISH
Configuring the Setting (continued)
Upgrading DTT
The DTT can be upgraded via the configuration menu.
MENU
button on the remote control.
1. Press
2. Select “Configuration” from the DTT main menu.
3. Select “Receiver Upgrade”.
4. Press
button to select “Automatic Download” along
with “Enabled”.
Automatic upgrade method takes place in standby/power save
mode.
The indicator lamp will blink whilst this is taking place.The TV will
check if new software is available every time you go to standby/
power save or every night at 3:00 a.m. if select “Enabled”.
You can check the current software version on the configuration
menu. (See 41 as an example.)
Automatic Download
Enabled
Search for New Version
MENU
EXIT
i+
More
NOTE
• Manual upgrade starts if the “Search for New Version” button is pressed instead of “Automatic
Download” button. To use this method, follow each dialogue box in sequence.
• We do not recommend that the set is left in standby/power save mode if you intend to leave the home for a long time.
• While downloading software, you cannot operate TV. No picture is displayed, either.
Setting Favourite Mode
By activating Favourite Mode from the configuration menu, only selected favourite channels will appear when using
button on the remote control to switch channels.
Refer to
43
how to set the channel as Favourites.
MENU
1. Press
button on the remote control.
2. Select “Configuration” from the DTT main menu.
3. Select “Favourite Mode”.
4. Use
button to select “On” to be activated.
49
DIGITAL TERRESTRIAL TELEVISION (DTT) OPERATION (continued)
Common Interface
Common Interface enables you to plug in a module which for example receives Pay TV service.
Once the common interface module has been successfully inserted, select a service from the DTT main menu as
follows.
MENU
Common Interface
Common Interface
1. Press
button on the remote control.
No Common Interface
Media Guard
2. Select “Common Interface” to show a new
module detected.
menu.
3. Select one of the buttons to enter that module’s Figure 1.
Figure 2.
Common interface Menu with
Common interface without modules
menu.
modules inserted into the slots.
inserted.
Each module display different item, depending on the module inserted.
NOTE
Please ask the service provider if the module type is suitable for TV. The TV supports modules meeting DVB
standard.
TV Setup Menu
“TV Setup” menu can be accessed from the DTT main menu. As selecting “TV
Setup”, it jumps to the TV main menu containing Analogue TV functions.
Refer to 24 ~ 39 regarding the settings for details.
50
Picture
Audio
Timer
Function
Setup
Language
Select OK Set
FUNCTION
ENGLISH
Power Swivel
SWIVEL
With the Desktop stand, you can adjust the angle of the panel side to side by pressing
button on the remote
control.
SWIVEL
1. Press
button on the remote control.
The Swivel Display (as shown in the figure on the right) will appear on the
screen.
button while Swivel Display is on the
2. Adjust the angle of the panel with
screen.
The unit will be able to rotate ±30 degrees to each side.
SWIVEL
button
CAUTION
When you use the Power Swivel function, make sure that the Power Cord, cord
or chain connected to the wall is loose enough to operate the Swivel function
securely.
Do not put hands or face near the unit while operating the Swivel. It could cause
personal injury. Beware especially when small children are around the unit.
Swivel
The Swivel Display
NOTE
Slack
If the stand cable is not connected to the unit, the message “Not Available”
will appear on the screen.
The Swivel Display will automatically disappear when no operation has
been made for about 6 seconds.
30°
30°
CAUTION
Do not push the panel with your hands while operating the Swivel. It could damage the panel and/or stand.
Do not allow children to play or hang on the TV. These actions may tip it over, causing personal injury.
Do not swing the unit back and forth.
Do not place any fragile objects around the unit. The unit would hit the object(s) during the Swivel operation and
could cause the breakage of the objects and/or the stand.
To operate the Swivel function correctly, place the unit on the stable surface.
When you use the unit as wall-mounting, disconnect the stand cable from the unit before installation.
Information
About Swivel terminal connection
To connect the Desktop stand
to the unit.
Connect the designated stand
cable to the Swivel terminal
on the rear side of the unit.
POWER
L
SWIVE
To disconnect the stand from
the unit.
Before detach the stand from
the unit, make sure to
disconnect the stand cable
from the Swivel terminal on
the rear side of the unit.
EL
R SWIV
POWE
CAUTION
Turn Off the Main Power of the unit when connecting or disconnecting the stand cable to the unit.
51
FUNCTION (continued)
Size Switching
ZOOM button
Each time
button of the remote control is pressed, the screen display size is
switched in sequence, and the status will be displayed at the bottom of the screen.
DTT/TV/AV1~AV3 signal input
Auto
Full
Current Output
Image
(Input Signal)
Zoom
C14:9L
14:9Zoom
Panoramic
Display Size
To display suitable screen as follows.
Auto
Play a image with the suitable format by automatically selecting
depending on the picture format or programme being broadcast.
Default Zoom setting in the Function Menu will be selected if WSS
signal or size switching signal is not detected in DTT, TV and AV mode.
Full
Play a 4:3 image faithfully in the standard vertical size and horizontally
squeezed.
Zoom
Play a 16:9 image in 4:3 screen (Vista size) faithfully. *In some cases,
slight blanking may remain at the top and bottom.
(Squeeze)
(Vista)
C14:9L
Play a 14:9 image in 16:9 screen, which is expanded vertically and
squeezed horizontally. This mode is provided for the broadcasting
programme with WSS code-C14:9L.
14:9Zoom
Play a 14:9 image in 16:9 screen, which is expanded vertically. This
mode is provided for the broadcasting programme with WSS code14:9Zoom.
Panoramic
Play a 4:3 image which enlarges horizontal and vertical size of the
middle in equal scales, and displays both sides appearing much wider.
(14:9 Signal)
(14:9 Signal)
(4:3 Signal)
52
FUNCTION (continued)
ENGLISH
Size Switching (continued)
AV4 / AV5 / HDMI1 / HDMI2 signal input
Panoramic
4:3
Current Output
Image
(Input Signal)
(4:3 Signal)
Full
Zoom
C14:9L
14:9Zoom
Display Size
To display suitable screen as follows.
4:3
Play a 4:3 image on screen faithfully. Blanking occurs on both sides.
Panoramic
Play a 4:3 image which enlarges horizontal and vertical size of the
middle in equal scales, and displays both sides appearing much wider.
Full
Play a 4:3 image faithfully in the standard vertical size and horizontally
squeezed.
(Squeeze)
Zoom
Play a 16:9 image in 4:3 screen (Vista size) faithfully.
*In some case, slight blanking may remain at the top and bottom.
(Vista)
C14:9L
Play a 14:9 image in 16:9 screen, which is expanded vertically and
squeezed horizontally. This mode is provided for the broadcasting
programme with WSS code-C14:9L.
14:9Zoom
Play a 14:9 image in 16:9 screen, which is expanded vertically. This
mode is provided for the broadcasting programme with WSS code14:9Zoom.
(14:9 Signal)
(14:9 Signal)
NOTE
The display size in AV4, HDMI1, and HDMI2 is fixed at Full mode when receiving 1080i or 720p format signal.
16
Information
Aspect ratio represents horizontal : vertical ratio on screen.
For example, vista image is 16:9 in 4:3 image.
16 (or 14 , 21)
9
3
9
4
53
FUNCTION (continued)
Size Switching (continued)
Position Adjustment
Vertical picture position can be adjusted for Panoramic, Zoom, C14:9L, and 14:9 Zoom mode as follows.
1. Press
button while operating the picture size display.
2. “Position” display will appear.
3. Adjust the position by
button.
Adjustment range of each picture size are as shown below.
Panoramic:
-12 to+12 (The position cannot be adjusted in Panoramic 2 mode.)
Zoom:
-31 to+ 31
C14:9L and 14:9 Zoom:
-16 to+ 16
*When 1080i/60 component signal is received, it can be adjusted only 0 to +1.
Position + 31
Position - 31
Press▲
Press▼
Vertical Size Adjustment at Panoramic Mode
Whilst displaying a picture except RGB input, the panoramic mode can be switched further between Panoramic 1 and
Panoramic 2 with
button on the remote control.
By selecting Panoramic 2, the vertical size is reduced so that you can see the whole image, including any subtitles, that
might otherwise not be fully visible on the screen.
NOTE
The function does not work when selecting Auto [Panoramic].
54
FUNCTION (continued)
ENGLISH
Size Switching (continued)
CAUTION
Using a wide-screen monitor
This monitor has a screen mode selection feature. If an incompatible screen mode is selected to play certain
software, such as a TV program, the image would appear different from the original. Take this into consideration
when making screen mode choices.
Use of the wide feature displaying enlarged pictures in coffee shops, hotel and other establishments for
commercial or public viewing purposes could infringe on the copyright holder’s right protected by Copyright Law.
When a normal 4:3 image (not wide screen) is displayed over the entire screen in the Panoramic mode, the
peripheral image may disappear partly and/or appear distorted in some cases. Use 4:3 mode to view the image
reflecting original intention.
RGB signal input
You can select suitable size depending on the resolution.
Normal
Real *
Full
Zoom3
Zoom1
Zoom2
*Real mode gives the image with same shapes as that
of computer monitor.
This mode is only available for VGA(640x480) to
WXGA(1280x768).
Display Area Selection Diagram
Resolution
Full display
Display
Full
Circular display
Normal
Real*
Zoom1
Zoom2
Zoom3
640 X 480 (VGA)
800 X 600 (SVGA)
1024 X 768 (XGA)
1280 X 1024 (SXGA)
1600 X 1200 (UXGA)
In the signal display chart shown above, some compression or stretching has taken place. Flicker may be noticeable
in zoom1~3 modes depending on content.
To reduce this flicker, turn “Vertical Filter” On from “Setup Menu” ( 29 ).
55
FUNCTION (continued)
Multi Picture Mode
With this feature, you can watch different channels simultaneously on one screen in several ways.
As for the available signals, please refer to "Recommended Signal List" on 75 .
• This function is NOT available in HDMI input.
• DTT input: 9700 models only
To activate Multi Picture mode in either DTT, TV, AV, or RGB mode,
press
button on the remote control.
2-picture mode
You can watch two different pictures side by side.
This mode is available in DTT, TV and AV mode (AV1~5 Input).
Control on the side with Speaker Icon
Audio is output from the selected picture with the speaker icon.
You can switch the Input modes (DTT, TV and AV1~5) or
change channels only on the side with Speaker icon.
1. To shift the speaker icon, press
The speaker icon
button.
The selected picture with speaker icon
will be shifted from A to B back-and-forth.
2. To change the channel on the selected picture, press
+
P
-
button.
5
3. To select the Input mode on the selected picture, press Input Select buttons on
the remote control.
AV1
A B
NOTE
In DTT or TV mode, you cannot select the same input channels on both sides
simultaneously.
You cannot select the same AV input on both sides simultaneously.
The message “Not Available” will be appeared on the screen when the
combinations of the Input modes are not acceptable.
(See the Table below for details.)
Table: Mix-and –Match of the Input Modes
Side B
DTT/
TV
AV1
AV2
AV3
AV4
AV5
DTT/TV
○*
○
○
○
○
○
AV1
○
×
○
○
○
○
AV2
○
○
×
○
○
○
AV3
○
○
○
×
○
○
AV4
○
○
○
○
×
○
AV5
○
○
○
○
○
×
Side A
*You can display TV picture on a side and DTT picture on the other side ; however, you cannot
select the same input channels on both sides simultaneously in DTT or TV mode.
56
FUNCTION (continued)
ENGLISH
Multi Picture Mode (continued)
2-picture mode (continued)
4. To switch to 4-picture mode, press
2-4-12
button once.
The 4-picture mode is displayed on the screen.
NOTE
Each time
2-4-12
2-Picture
AV1
button is pressed, the picture mode will be switched by following order.
2-Picture (1080i)*
4-Picture
AV2
12-Picture (TV mode only)
* When receiving 1080i format of component signal, there is a mode (2-Picture(1080i))
which sub-screen is displayed inside of the large screen (Main-screen). Please
note that you cannot display the picture with component signal on Sub-screen.
(Subscreen)
[2-Picture (1080i) Mode]
button.
5. To EXIT from the Multi Picture mode, press
Next time you press
button to activate the Multi Picture mode, it will start from 2-picture mode.
4-picture mode
You can watch 4 different pictures from live broadcasts and/or the external equipments at the same time.
NOTE
The audio comes out ONLY from side A.
You can change the channels or change Input modes on the side with ▼ (red triangle) mark.
1. To switch the ▼ location
The selected picture with red triangle mark
button on the remote control.
Press
The ▼ mark will shift to side A and side B back-and -forth.
2. To change the channel
Make sure that ▼mark is located on the side you want to make changes.
Side A: Press
+
P
-
5
A
B1 8
B2 6
B3 11
button to select channels.
Side B: Select the frame (B1~B3) that you want to make changes
with
button. The characters of selected frame will be highlighted in green.
Press
+
P
-
button to select channels.
3. To change Input mode
Make sure that ▼mark is located on the side you want to make changes.
Side A: Press Input Select buttons on the remote control.
Side B: Select the frame (B1~B3) that you want to make changes
button. The characters of selected frame will be highlighted in green.
with
Press Input Select buttons on the remote control.
57
FUNCTION (continued)
Multi Picture Mode (continued)
4-picture mode (continued)
NOTE
You cannot display the picture with Component signal on Side B screens.
button.
4. To EXIT from Multi Picture mode, press
Next time you press
button to activate the Multi Picture mode, it will start from 4-picture mode.
button.
5. To switch to 12-picture mode, press
The 12-picture mode is displayed on the screen.
2-4-12
12-picture mode
You can check 12 different live broadcast channels on one screen.
The channels that are preset in advance (up to 200 channels) will
automatically appear in certain intervals.
NOTE
1
2
3
4
5
6
7
8
9
10
11
12
This mode is available only in TV mode.
1. To EXIT from the Multi Picture mode, press
button.
Next time you press
button to activate the Multi Picture Mode, it will start from 12-picture mode.
2. When you press
58
2-4-12
button in this sequence, the 2-picture mode will be displayed.
FUNCTION (continued)
ENGLISH
Multi Picture Mode (continued)
Activate the Multi Picture Mode in RGB Mode
When you activate the Multi Picture mode in RGB Input, the picture will be displayed at the mode which the Subscreen is displayed inside of the large screen (Main-screen).
To activate Multi Picture mode, press
button on the remote control.
indicates the following.
The speaker icon
The audio sounds can be heard on the side with the speaker icon.
When the speaker icon is on the Sub-screen
Change channels.
Switch the Input modes (DTT, TV and AV1~5) on the Sub-screen. (Main-screen is only for RGB Input.)
1. To shift the speaker icon
The speaker icon
, press
button.
will be displayed in front of the Input mode indication.
Input mode indication
Main-screen (upper)
2. To change the DTT/TV channel of the Sub-screen.
Make sure that
mark is located on the Sub-screen.
Press
+
P
-
Sub screen (lower)
button to select channels.
RGB
3. To change the Input mode of the Sub-screen.
Make sure that the speaker icon is located next to the Input mode
indication of the Sub-screen (lower).
Press Input Select buttons on the remote control.
(AV1~5 are available)
AV1
(Subscreen)
4. To change the location of the Sub-screen.
Press
button. The Sub-screen will move up and down.
5. To exit from the Multi Picture mode, press
button.
NOTE
When operating Multi Picture mode, the “Power Save mode” is not available even though the Horizontal/Vertical
Sync. Signal (or any kind of Video signal) has not input for certain period of time.
59
FUNCTION (continued)
Picture Freezing
By pressing
button, you can change to freeze mode easily anytime you
2-4-12
like. Press it again to return to normal picture.
FREEZE button
There are two types of freeze mode. You can select these in the “Freeze
Mode” from Function Menu.( 30 )
Split:
It displays 2 pictures from the same source. One is active (left), while the other
is still picture (right). This is very useful in order to avoid missing something or
to make a note of something, such as a recipe.
Strobe:
It displays 12 pictures from the same source. 11 of them are still, while the last
picture is active. This can be used to check such movement as swinging of
golf club or baseball bat.
This function is also available in DTT and AV input mode besides TV mode.
Refer to the table as shown in “Recommended Signal List” on 75 .
60
[Split]
I
A
A
[Strobe]
1
2
3
4
5
6
7
8
9
10
11
12
ACTIVE
FUNCTION (continued)
ENGLISH
Photo Input Function
With this Photo Input function, you can enjoy watching Photos from such devices as
Digital Still Camera and SD card along with useful features such as Slide Show with
Background Music and Movie picture.
Operating the Photo Input
1. Before operating this function, make sure to turn the power OFF /Standby.
2. Prepare the DSC (Digital Still Camera) / USB card reader/ SD card or MMC as follows.
Digital Still Camera : Set up with reference to the content about
“connecting to PC” in the user’s manual of DSC.
USB Card Reader
: Insert only one memory card.
SD Card / MMC
: Ensure the card is inserted in the correct direction as
indicated near the slot.
3. Connect the USB cable to the input terminal as shown (Right side), or insert the
SD card /MMC into the slot (Left side).
4. Turn ON the TV after the USB cable is connected or the SD card / MMC is inserted.
5. Press
button on the remote control to activate Photo Input mode.
(Then, turn ON the DSC. Refer to the user’s manual of your DSC for the timing.)
6. Each time
button is pressed, you can switch the mode as follows.
CLE-978
Photo
Movie
Normal Screen
Make sure to turn the power OFF/Standby when disconnecting the DSC / USB
card reader / SD card or MMC from the set.
Left Side
SD MEMORY
CARD
Photo Input
button
Right Side
SD Card/MMC
Digital Camera
PH35826
PUSH-EJECT
USB cable
P
P
R
INPUT(AV5)
L/MONO
AUDIO
VIDEO S-VIDEO
USB Card Reader
OK
PH35814
Rear Panel (Left side and Right side)
NOTE
Do not insert SD Card/MMC and USB cable at the same time.
Do not insert anything other than SD Card/MMC into the slot. It could cause malfuction or damage to the slot.
Do not allow children to play around the slot.
61
FUNCTION (continued)
Photo Input Function (continued)
Displaying Still Picture in Photo Mode
Thumbnail-Size Image (Index) to Full-Size Image
1
2
3
4
17
18
19
20
17
18
19
20
5
6
7
8
21
22
23
24
21
22
23
24
9
10
11
12
25
26
27
28
25
26
27
28
13
14
15
16
29
30
31
32
29
30
31
P
P
st
nd
Photo Index (1 Page).
32
nd
Photo Index (2 Page)
Move to next page.
Photo Index (2 Page)
Select the file.
OK
No. 23
28/05/03
1600x1200
No. 24
28/05/03
1600x1200
Full size
File#23 is displayed.
OK
Full size
File#24 is displayed.
When you enter the Photo Index mode, the
icon appears as the indication.
You can also select the preferred file in both Thumbnail-size and Full-size image by inputting the file directly with
numeric buttons of remote control.
Rotation Function
-ROTATE?
A
A
Photo Index (2nd Page).
Rotating a thumbnail
image to 90°.
OK
?
A
A
Full size
File#23 is displayed.
Rotating a full size
image to 90°.
No. 23
28/05/03
1600x1200
-ROTATE-
Each time
?
90°
62
-ROTATE-
button is pressed, the picture is rotated in the sequence of the following.
180°
270°
0°
FUNCTION (continued)
ENGLISH
Photo Input Function (continued)
Displaying Still Picture in Photo Mode (continued)
Slide Show Function
SLIDE SHOW
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
OK
No. 23
28/05/03
1600x1200
Slide Show begins.*
Photo Index (2nd Page)
Select the file.
OK Start
Slide Show is paused.
*You can select where to start Slide Show. See “Slide Mode” in the table 1.
*You can also start the slide show when displaying the selected full
SLIDE SHOW
size image, press SLIDE SHOW button by pressing
button.
If the pause is left for more than a minute, the slide show restarts automatically.
If you stop the slide show halfway, the photo index page selects the file in which you stopped.
You can make specific adjustment on “Slide Effect / Slide Interval / Slide Music / Slide Mode” from “Function
MENU
button. Press it
Menu (2nd page)”. While operating Photo Input function, you can jump to there by pressing
again to return to the Photo Input page. (Refer to Table 1 as below.)
NOTE
Contrast will decrease automatically to reduce power consumption if stationary images such as
still photos are left on the screen for more than 3 minutes. Please note that it is not malfunction.
Table 1. Slide Show Adjustment
Function Menu
Selection
Description
Slide Effect
Off→1→2
Select Slide Switching Method.
Off: No effect
1: Fade In/Out effect
2: Wipe effect
Slide Interval
5Sec.→10Sec.→30Sec.
Select preferred interval times.
Slide Music
Off→1→2
Select the Background Music.
Off: No sound.
1: Slow tempo music.
2: Up tempo music.
Slide Mode
1→2
Select starting point of slide show.
1: Start from the selected file.
2: Start from 1st file.
63
FUNCTION (continued)
Photo Input Function (continued)
Displaying Movie Picture in Movie Mode
Thumbnail-Size Image (Index) to Full-Size Image:
17
18
19
20
21
22
23
24
28
25
26
27
28
32
29
30
31
1
2
3
4
1
2
3
4
17
18
19
20
5
6
7
8
5
6
7
8
21
22
23
24
9
10
11
12
9
10
11
12
25
26
27
13
14
15
16
13
14
15
16
29
30
31
st
P
P
st
Photo Index (1 Page).
nd
Movie Index (1 Page).
or*1
or*5
Movie Index (2 Page).
Movie starts.
or *2
Movie Index (2 Page)
Select the file.
or
OK
or
32
nd
or *3
Operate the Movie
with remote control
keys or Movie OSD.
After completing the
current movie, the
next Movie starts
automatically.
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
After completing all
of the movie files, it
automatically returns
to the Index. *4
*1: Press
button or
button to display the operation OSD.
*2: Press
button in remote control or
button (OSD) to exit from the OSD display.
*3: For the Previous button on remote control or OSD, pressing it once starts over the current movie. By
pressing it again within 2 seconds after that, you can return to the previous movie.
*4: When it moves on the unsupported file, it automatically returns to the Index.
*5: You can also select the Thumbnail-Size image by inputting file # with numeric buttons of remote control.
[Operating the Movie]
You can use the following control key to operate the movie.
Remote
Control
Play
Stop
AV3
AV2
Fast- Rewind
forward
RGB
HDMI1/2
Pause
Next
*
Previous
3
Zoom
Slow
Play
Exit
AV5
OSD
The movie OSD contains the file information and control keys as below.
The following indications might appear in Movie Operation OSD.
: The movie does not have sound, or this function does not support only the sound of movie.
: This function does not support the movie.
With
button on the remote control, you can switch the size of movie display between normal and double in full size mode.
NOTE
In case of displaying movie pictures,
1) If your DSC supports SD card/MMC, insert the card to the unit directly rather than USB.
2) If your DSC is PictBridge-compatible and has a function to switch between PTP and Mass Storage connection,
change your setting to Mass Storage and then connect to Photo Input terminal so that it can be available on
both Still and Movie pictures. PTP connection can display still pictures but not movie pictures.
3) If your DSC does not support SD card / MMC or Mass Storage connection, use USB card reader to connect
with Photo Input terminal. Please note that we do not guarantee all DSC can make either or both Mass Storage
and USB card reader connection.
Comparing to movie pictures through SD card/MMC, the movie pictures using USB might have lower
performance such as dropping frames.
64
ENGLISH
FUNCTION (continued)
Photo Input Function (continued)
Other
You can select the background pattern on “Background” from “Function Menu.”
Function Menu
Background
Selection
Description
Select preferred background pattern.
1: Striped texture of grey
2: Green checked pattern
1→2
Press
button whenever you want to return from full size image to index.
The file information is displayed by pressing
button.
* The size of the image depends
on the resolution for the image.
Thumbnail-Size Image
Full-Size Image (Still)
Full-Size Image (Movie)*
To exit from Photo Input…
You can exit from Photo Input when…
Pressing
button in Photo Index mode, or
Pressing
button in Movie mode (Index and full).
OSD Information
Operation
Accessing
Loading Files
Normal
Not insert USB/SD/MMC
Not available format
Abnormal
No File
Message
“Loading...” *
“Loading...” *
no message
“! No Connection”
“! No Connection”
“! No Connection”
“! No File”
*The message “Loading...” starts to blink automatically if it is displayed on the screen more than 5 seconds.
Specification
Application
Photo
Digital Still Camera corresponding to DCF standard.
USB Card Reader with the memory containing pictures had taken by
SD card/MMC card containing picture had taken by
camera.
Max number of photo file
500
Max number of pixel
8176 x 8176(DCF JPEG format)
Max number of movie file
500
camera.
Motion JPEG (avi.mov/640*480)
Supported Video Format
(Extension/Max number of pixel)
MPEG1 (mpg/640*480)
MPEG4 (avi,mov,mp4,asf/352*288)
PCM (Incompressible format)
Movie
ADPCM
Supported Audio Format
G.726
μ-LAW PCM
MPEG1-LayerII
65
FUNCTION (continued)
Photo Input Function (continued)
CAUTION
In case of copying, viewing or editing a picture by computers, etc., it may not be displayed in this function.
Do not connect any apparatus other than DSC, USB card reader, and SD card/MMC to the Photo Input
connector. It causes the malfunction.
Do not connect a DSC and USB card reader with USB HUB. Pictures may not be displayed correctly, or it causes
a malfunction.
Insert only one memory card even though the USB card reader has multiple slots for memory card. Pictures in
multiple memories cannot be seen at the same time.
Certain types of DSC, card readers, or SD card/MMC may not work with this Photo Input function.
DSC with low battery power may not properly display photos in this function.
Response time might vary depending on each image contents when switching pages, loading files, and playing
each movie.
Contrast will decrease automatically if stationary images such as still photos are left on the screen for more than
3 minutes.
The OSD message “! No Connection” is displayed in case of the incomplete connection with USB cable or SD
card / MMC and connection to a digital still camera or USB card reader without the memory card.
The menu items other than “Picture,” “Function,” and “Audio” are not available, which are shown in grey.
The functions of the multi picture, CH selection, freeze mode, aspect, mode display, and so on are not available.
Whilst displaying still/moving images, blinking LED which indicates the access of DSC / USB card reader /SD
card/ MMC, or displaying “Loading...”, do not turn the power off/standby mode nor remove/insert USB cable and
memory card.
The picture may not be displayed correctly, depending on the connecting device in case of extending the USB
cable.
PictBridge-compatible DSC can be connected to Photo Input terminal through PTP transfer, which supports still
pictures but not movie pictures. Refer to the DSC user’s manual for PictBridge in details.
Do not use this function other than private purposes. It might infringe copyright laws.
Back up all of the data in the memory card in case if data was lost due to unexpected accident. We do not
assume any liability for the losses by misuse or malfunction.
66
FUNCTION (continued)
ENGLISH
Audio Switching
NICAM / Sound Multiplex(including A2) (TV mode)
You can make optimum use of available audio by pressing
button of remote control. Audio can be switched only
if receiving NICAM and sound multiplex signals; otherwise, pressing this button will have no effect, such as when
only mono sound is received.
These can be divided into two main categories: Bilingual/Dual Sound broadcast and Stereo broadcast.
Bilingual/Dual Sound broadcast
Bilingual broadcast is the broadcast available on the main and sub languages, while dual sound broadcast is
available on the primary and secondary sounds; for example, some sports programs contain broadcast commentary
on a game as primary sound, and a commentary about a team as the secondary.
When bilingual program is received, sound mode display appears in yellow as shown. Also, when receiving NICAM
signals, NICAM display will appear.
Each time
button is pressed, the display is switched in the sequence of following.
Sound multiplex signal received
Yellow
[ ]
NICAM signal received
Yellow
Green
[ ]
Yellow
Yellow
NICAM[ ]
Green
NICAM[ ]
[I]…Main language/Primary Sound
[II]...Sub language/Secondary Sound
▼…force mono: This selects main language or primary sound.
Stereo broadcast
With stereo broadcast, you can enjoy different sound from either side.
When a stereo program is received, sound mode display will appear in red as shown.
Also, when receiving NICAM signals, NICAM display will appear.
Press
button to switch between stereo and mono sound.
Sound multiplex signal received
Red
Green
Red
Green
NICAM signal received
NICAM
...Stereo
.....Force Mono
NOTE
Please select ▼(force mono) in case of poor reception, noise, poor stereo sound due to signal condition so that
you can receive a clear mono sound.
▽ represents the Mono broadcast.
67
FUNCTION (continued)
Power Save Mode
When AV input is selected
You are provided with the function to save power consumption when no signal is detected in AV input. Set to On in
“Video Power Save” from Function Menu, which leads to the power save mode in AV4 /HDMI1 /HDMI2 and the
Standby mode in other AV input. (Please see the table below for details) Refer to 30 about “Video Power Save”.
When no signal is detected
Condition
Indicating Lamp
When signal is input during
On in “Video Power Save”
AV4,HDMI1, 2
Power Save
Orange
Turns On automatically.
AV1, 2, 3, 5
Standby
Red
Remains as Standby mode.
When the RGB input is selected
When this unit is connected to a VESA DPMS computer, the Power Save mode (Operation mode : Off) can be set
to be activated automatically when the computer is not being used to reduce power consumption by this unit.
RGB sync signal
Horizontal
Yes
No
Yes
No
Vertical
Yes
Yes
No
No
PC signal
Active (normal display)
Blank (no display)
Operation mode
On
Off
Indicating lamp
Lights green
Lights orange
Returning to operating status
Operate the personal computer, or press either the INPUT SELECT button of the control panel or the RGB button of
the remote control.
68
FUNCTION (continued)
Recall
button
DVD Player / STB Selection
ENGLISH
Function Select
button
You can use this remote control to operate DVD Player and Set Top Box of other
button, press (or hold) the required
makers as well as this set. After pressing
buttons to select the maker and type as shown below.
Set up hint
Example: HITACHI DVD ②
1. Set up the maker.
Press
button to indicate the DVD LED on the remote control. While the DVD
LED is blinking (Approx. 30 Seconds), press
and ① buttons.
+
2. Set up the maker type.
Release the ① button while keeping
+
button depressed. Then press ② button.
3. Confirm the setting.
After setting the maker and type, press the SUB POWER button on the remote
control. If the DVD does not switch ON, repeat step 1 and 2 using other maker
types as listed.
<“DVD” Selection>
Makers of DVD Player
Set Maker
HITACHI
+
FUNAI
Set type
Makers of DVD Player
Set Maker
Set type
RCA
+
+
+
Mitsubishi
+
+
Pioneer
+
ONKYO
+
RED
+
Panasonic
+
ZENITH
+
GREEN
+
TOSHIBA
+
THOMSON
+
YELLOW
+
Philips
+
SHINCO
+
BLUE
+
JVC
+
SKYWORTH
+
+
SAMSUNG
+
BUBUKO
+
+
Sony
+
DENON
+
+
Sharp
+
YAMAHA
+
2-4-12
?
+
<“SAT” Selection>
Makers of STB Player
Set Maker
Set type
HITACHI
+
+
TOSHIBA
+
+
DGTEC
+
+
Panasonic
+
+
NOTE
Please note that not all models of the listed makers can be operated using this remote control.
69
TROUBLESHOOTING
Before calling service technician, check the following tables first. If the problem is not be solved with the suggested procedures, contact your local
dealer. For your safety, NEVER try to repair the product by yourself.
When Following Messages Appear on the Screen
Message
Condition / Action
Page
Power Save
This indicates it is in Power Save mode. (in AV/RGB mode)
The indicating lamp lights in orange.
30 , 68
No Sync. Signal
The unit cannot detect any signals from any input terminals.
Check if the cable is connected correctly and firmly.
Check if the power of any external equipment is ON.
Check if the input selection matches the connection terminal.
Check if the PC is in Power Save mode or not.
15
Invalid Scan Freq.
The unit receives unsupported signals.
Check if the cable is connected correctly and firmly.
Check if the input signal is compatible with the specification of the television.
73 , 75
Not Available
This shows when the selected operation is not available.
Check Antenna
Check the connection status when this message appears.
14
Auto Adjusting
This indicates that it is in the process of auto adjusting. (in RGB mode)
28
No Signal
Check aerial lead if it is disconnected / damaged / misaligned.
Check with your dealer if it is out of signal area or not. (in DTT mode)
Scrambled channel
Check if the common interface module inserted correctly. (in DTT mode)
~
18
Symptom and Check List
Symptoms
No picture - no sound
70
Check list
Check the Indicating lamp status (Off, Red, Green, or Orange).
Check the connection of the Power Cord and/or other cables.
Check if the Main Power of the unit or external equipments is ON.
Check if the TV mode is selected.
Check if the TV is in “Standby mode” or “Power Save mode”.
Adjust the values in “Picture menu” and “Audio menu”.
Page
14
~ 18
20 , 25 ,
68
Snowy picture-poor sound
Check the antenna connection and direction.
The TV station may have broadcast difficulties.
Try another channel.
Multiple images-normal sound
Check the antenna connection and direction.
Fine tuning the TV.
Check the connection of the external equipments.
The TV station may have broadcast difficulties.Try another channel.
Intermittent interference
Check if the source of interference is shielded well.
Remove those kinds of electrical devices away from the TV.
Normal picture, but no sound
Check the volume level.
Check if the
button has been pressed or not.
Make sure that the headphone is NOT connected.
Check the connection of the external equipments.
No picture - normal sound
Check the value level of “Brightness”, “Contrast” and “Back
Light” in “Picture Menu”.
32 , 35
The remote control does not work.
Check if the batteries are installed correctly.
The batteries might be exhausted. Replace them with new ones.
Remove all the obstructions in front of the sensor window on the unit.
Check if you select the correct function by
button on the
remote control.
Check if the buttons of the control panel can work.
11 , 12
Normal picture but no colour-normal
sound
Check the connection of the external equipments.
Check the “Colour System” in “Setup Menu”.
15
14
14 , 25
22
~
18
TROUBLESHOOTING (continued)
Symptoms
No picture
The Indicating lamp → Off
No picture
The Indicating lamp → Orange
It means that the unit is in “Power Save
mode”.
Check list
Page
Check if the Power Cord is plugged into the socket firmly.
Check if the Main Power is ON.
Check if the signal cable is connected correctly and firmly.
Adjust the level of Brightness, Contrast and Back Light lower.
The top of the unit and surface of the
panel heat up.
It may happen when you use the unit for long hours. Turn off the Main
Power of the unit for a while. Please note that this is not malfunction.
Image cannot be displayed in the correct
position.
Press
button to check if the input signal of the displayed image is
compatible with the specification of the television.
When the VCR is in special playback
features (Fast Forward or Rewind), the
screen gets dark and cannot see the
image at all.
It could happen when the VCR is connected to Component output, such
as 480i. This is not malfunction.
Try Composite output or S-video output and check the picture again.
Screen display size cannot be switched
correctly.
Cannot be displayed the image from
HDMI 1 or 2.
19 , 20
Check if all the cables of the external equipments are connected
correctly and firmly.
Check if the power of the external equipments is ON.
Check if the TV/AV mode has been selected correctly.
Check if the PC is in Power Save mode or not.
Refer to “Power Save mode” and “When following messages appears on
the screen”.
No picture
The indicating lamp → Green
The images are not displayed on sub
pictures in “Multi Picture mode”
There are some combinations of input signals that the images are not
displayed on sub pictures.
Please check the Table of “2-Picture” and “4-picture/2-picture(1080i)” for
details.
The display size is fixed at “FULL” when the receiving signals are
1080i/60Hz, 1080i/50Hz, 720p/60Hz, or 720p/50Hz.
Check the signal status by pressing the
control.
ENGLISH
Symptom and Check List (continued)
button on the remote
Check if the cables are connected correctly.
Check the output format of the equipments.
(Please refer to “Connecting Procedure” and “Recommended Signal
List”.)
68
15
~
18
73 , 75
28 , 73 ,
75
57
~
59
76
52
~
53
73
~
75
71
TROUBLESHOOTING (continued)
Symptom and Check List (continued)
Symptoms
Check list
Cannot display the image from “Photo Input function”.
Check the connecting equipments and image format.
(Please refer to “Photo Input function”.)
61 , 65 ,
66
The image on the screen is moving in
an oblique direction.
(RGB input mode only)
Adjust “Horizontal Clock” and “Clock Phase”.
28
The coarse horizontal stripes could be
seen in full-display mode.
(RGB input mode only)
Adjust “Horizontal Clock”.
28
Try “Auto Adjust”. (RGB input mode only)
28
AAAAA
The part of the image is lacking.
Check the Signal status of the PC by pressing
button
on the remote control.
If the Vertical Frequency of the PC is set to less than 85Hz,
adjust its level higher (up to 85Hz).
Set “Vertical Filter” to ON.
(Please note that you will have lower vertical resolution with
this action.)
The horizontal stripes are moving
vertically with flickering screen.
(RGB input mode only)
When the characters are displayed
on the whole screen, the vertical
stripes appear and some of the
characters are blurred.
(RGB input mode only)
When the letter string is displayed in
full-screen, all of the characters on
the screen are blurred.
(RGB input mode only)
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
ABCDEFGHIJ
abcdefgABCDEFGabcd
When the small patterns are
displayed on the screen, the entire
screen is flickering.
(RGB input mode only)
The thickness of the letters, lines, etc is not displayed
evenly.
(RGB input mode only)
72
Page
29
Try “Auto Adjust”.
If the display condition is not improved with Auto Adjust,
adjust “Horizontal Clock”.
28
Try “Auto Adjust”.
If the condition is not improved with Auto Adjust, adjust
“Clock Phase” till you get clearest image.
28
Try “Auto Adjust”.
If the condition is not improved with Auto Adjust, adjust
“Clock Phase” till you get flicker-free display.
28
It could happen when the image with more than 768 lines
of vertical resolution is displayed.
Please note this is not malfunction.
75
No Picture or sound is output.
(DTT mode only)
It might occur because it is tuned to digital teletext channel.
Return to another channel.
44
Forgotten channel lock code.
(DTT mode only)
Re-install channel to cancel channel lock.
41
Forgotten menu lock code.
(DTT mode only)
Contact the customer service listed on the rear page.
Due to the bad reception, block noise interferes during
DTT mode.
(DTT mode only)
Check the aerial system to improve signal quality.
-
14
PRODUCT SPECIFICATIONS
Display dimensions
Approx. 32 inches
(698 (H) x 392 (V) mm, diagonal 801mm)
Approx. 37 inches
(820 (H) x 461 (V) mm, diagonal 941mm)
Resolution
1366 (H) x 768 (V) pixels
1366 (H) x 768 (V) pixels
Net dimensions
including Stand:
813(W)x663(H)x350(D) mm
excluding Stand:
813(W)x584(H)x114(D) mm
including Stand:
940(W)x736(H)x350(D) mm
excluding Stand:
940(W)x657(H)x119(D) mm
Net weight
including Stand: 28.0kg
excluding Stand: 22.3kg
including Stand: 32.5kg
excluding Stand: 26.8kg
Panel
Ambient
conditions
Temperature
Operating : 5°C to 35°C, Storage : 0°C to 40°C
Relative humidity
Operating : 20% to 80%, Storage : 20% to 90% (non-condensing)
Power supply
AC220 - 240V, 50Hz
Power consumption/ at standby
163W/<1W
195W/<1W
Audio output
speaker total 20W
speaker total 20W
ENGLISH
SPECIFICATION
(VIDEO input)
Input terminals
AV1 : composite video input terminal (SCART)
S video input terminal (SCART)
L/R audio input terminal (SCART)
AV2•3 : composite video input terminal (SCART)
RGB video input terminal (SCART)
L/R audio input terminal (SCART)
AV4 : composite video input terminal (RCA)
component video input terminal.(RCA)
L/R audio input terminal (RCA)
AV5 : composite video input terminal (RCA)
S video input terminal (Mini DIN)
L/R audio input terminal (RCA)
HDMI 1•2 : HDMI input terminal
Audio input terminal (3.5mm Stereo Mini Jack)
Photo Input : Photo Input terminal / SD card slot
Input signals
Composite video: PAL, SECAM, NTSC3.58, NTSC4.43, PAL60
Component video: 480i, 576i, 480p, 576p, 720p/50, 720p/60, 1080i/50, 1080i/60
Output Signal
OUTPUT (MONITOR): composite video monitor-output terminal (RCA)
OUTPUT (MONITOR): L/R audio monitor- output terminal (RCA)
OUTPUT (HEADPHONE): L/R audio monitor- output terminal (Mini-pin)
OUTPUT (SUB-WOOFER): Woofer output terminal
AV1 : composite video output terminal (SCART)
L/R audio output terminal (SCART)
AV2•3 : composite video output terminal (SCART)
L/R audio output terminal (SCART)
(RF input)
Input terminal / Receiving range
ANT : 75Ω Unbalanced / 44~870MHz
RF Video System
PAL B, G, H / I / D, K
SECAM B, G / K1 / L, L' / (D,K)
DVB-T*
(RGB input)
Input terminals
Analogue RGB input terminal (D-sub 15-pin)
Audio input terminal (3.5mm Stereo Mini Jack)
Input signals
0.7 V/1.0 Vp-p, analogue RGB (Recommended Signal)
Sync signals
H/V separate, TTL level [2KΩ]
H/V composite, TTL level [2KΩ]
Sync on green, 0.3 Vp-p [75Ω]
The unit takes at least 30 minutes to attain the status of optimal picture quality.
The SECAM D, K system might not be normally received, depending on the model.
The DVB-T system is available only for 9700 models.
73
PRODUCT SPECIFICATIONS (continued)
Signal Input
RGB terminal (D-sub 15-pin connector)
Pin
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
Input signal
R
G or sync on green
B
No connection
No connection
R.GND
G.GND
B.GND
No connection
GND
No connection
[SDA]
H. sync or H/V composite sync
V.sync. [V.CLK]
[SCL]
When different kinds of input signals are
simultaneously input to the unit via a graphics board,
etc., the unit will automatically select the signals in
the following priority order:
Sync signal type
H/V separate sync.
H/V composite sync.
sync.on Green *
* Even in the case of the recommended signals shown
on the following page, there may be instances when
correct display is not possible. In this case, use H/V
separate sync, H/V composite sync.
S-input connector pin specifications
Pin
1
2
3
4
Frame
Photo-input connector pin specifications
Pin
1
2
3
4
Input signal
Y
Y-GND
C
C-GND
GND
Input signal
5V
DM
DP
GND
HDMI connector pin specifications
Pin
1
2
3
4
5
6
7
8
9
10
Input signal
TMDS Data2+
TMDS Data2 Shield
TMDS Data2TMDS Data 1+
TMDS Data1 Shield
TMDS Data1TMDS Data0+
TMDS Data0 Shield
TMDS Data0TMDS Clock+
Pin
11
12
13
14
15
16
17
18
19
Input signal
TMDS Clock Shield
TMDS ClockCEC
Reserved(N.C. on device)
SCL
SDA
DDC/CED Ground
+5V Power
Hot Plug Detect
SCART connector pin specifications
Pin
1
2
3
4
5
6
7
8
9
10
11
74
Input signal
AUDIO OUT (RIGHT)
AUDIO IN (RIGHT)
AUDIO OUT (LEFT / MONO)
AUDIO GND
RGB-B GND
AUDIO IN (LEFT / MONO)
RGB-B IN
AUDIO / RGB SWITCH / 16:9
RGB-G GND
Not Used
RGB-G IN
Pin
12
13
14
15
16
17
18
19
20
21
Priority
1
2
3
Input signal
Not Used
RGB-R GND
GND
RGB-R / S.VHS CHROMINANCE IN
BLANKING SIGNAL
COMPOSITE VIDEO GND
BLANKING SIGNAL GND
COMPOSITE VIDEO OUT
COMPOSITE VIDEO / S.VHS LUMINANCE IN
GND / SHIELD (CHASSIS)
PRODUCT SPECIFICATIONS (continued)
ENGLISH
Recommended Signal List
With HDMI input
Signal mode
No.
Signal
Name
1
2
3
4
5
6
7
8
9
VGA
576i
480i
576p
480p
1080i/50
1080i/60
720p/50
720p/60
Resolution
Vertical
frequency (Hz)
Horizontal
frequency
(kHz)
Dot clock
frequency
(MHz)
640 X 480
720(1440) X 576
720(1440) X 480
720 X 576
720 X 480
1920 X 1080
1920 X 1080
1280 X 720
1280 X 720
59.94
50.00
59.94
50.00
59.94
50.00
60.00
50.00
60.00
31.47
15.63
15.73
31.25
31.47
28.13
33.75
37.50
45.00
25.18
27.00
27.00
27.00
27.00
74.25
74.25
74.25
74.25
Resolution
Vertical
frequency (Hz)
Horizontal
frequency
(kHz)
Dot clock
frequency
(MHz)
640 X 400
640 X 480
864 X 480
640 X 480
640 X 480
640 X 480
800 X 600
800 X 600
800 X 600
800 X 600
800 X 600
1024 X 768
1024 X 768
1024 X 768
1024 X 768
1152 X 864
1280 X 1024
1280 X 1024
1280 X 1024
1600 X 1200
1600 X 1200
1600 X 1200
640 X 480
832 X 624
1024 X 768
1152 X 870
1280 X 768
1280 X 768
1280 X 768
1366 X 768
70.08
59.94
59.94
72.81
75.00
85.01
56.25
60.32
72.19
75.00
85.06
60.00
70.07
75.03
85.00
75.00
60.02
75.03
85.02
60.00
75.00
85.00
66.67
74.55
74.93
75.06
59.833
69.997
59.876
60.015
31.47
31.47
31.47
37.86
37.50
43.27
35.16
37.88
48.08
46.88
53.67
48.36
56.48
60.02
68.68
67.50
63.98
79.98
91.15
75.00
93.75
106.25
35.00
49.72
60.24
68.68
47.986
56.137
47.776
47.712
25.18
25.18
34.24
31.50
31.50
36.00
36.00
40.00
50.00
49.50
56.25
65.00
75.00
78.75
94.50
108.00
108.00
135.00
157.50
162.00
202.50
229.50
30.24
57.28
80.00
100.00
81.00
94.760
79.50
85.50
Remarks
EIA-861B
EIA-861B
EIA-861B
EIA-861B
EIA-861B
EIA-861B
EIA-861B
EIA-861B
EIA-861B
With RGB input
No.
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
Signal mode
Signal
Name
VGA
W-VGA
VESA
Macintosh
W-XGA
W-XGA
Remarks
WVGA type : On
WXGA Mode : 1280x768
WXGA Mode : 1366x768
The type of video board or connecting cable used may not allow for correct displays adjustment of Horizontal Position, Vertical Position,
Horizontal Clock and Clock Phase.
The unit may fail to display an animation image correctly when a signal having a vertical frequency of 85Hz or higher is input to it.
The unit differentiates the signal modes according to the horizontal and vertical frequencies and the horizontal and vertical sync signal
polarities. Note that different signals having all these elements alike may be handled as the same signal.
Displaying images with more than 768 lines of vertical resolution at Full display (compressed display) can result in the interpolation of
stripes.
75
PRODUCT SPECIFICATION (continued)
Recommended Signal List (continued)
With Multi Picture Function
2-Picture / (1080i)*
Input terminal
Sub
AV1
~AV5
AV2, AV3
AV4
Main
DTT
TV
PAL, SECAM
NTSC3.58/4.43
RGB
576i, 576p
480i, 480p
720p/50, 60
1080i/50, 60*
DTT
TV
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
AV1~AV5
PAL
NTSC3.58
SECAM NTSC4.43
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
AV2, AV3
RGB
○
○
○
○
○
○
○
○
○
576i
576p
480i
480p
AV4
720p/50
720p/60
1080i/50
1080i/60
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
TELE
TEXT
○
○
(○ : Available)
4-Picture
Input terminal
Sub
AV1
~AV5
AV2, AV3
AV4
Main
DTT
TV
PAL, SECAM
NTSC3.58/4.43
RGB
576i, 576p
480i, 480p
1080i/50, 60
720p/50, 60
DTT
TV
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
AV1~AV5
PAL
NTSC3.58
SECAM NTSC4.43
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
AV2, AV3
RGB
576i
576p
480i
480p
AV4
720p/50
720p/60
1080i/50
1080i/60
TELE
TEXT
○
○
○
○
○
○
○
○
○
(○ : Available)
With Picture Freezing Function
DTT
TV
PAL, SECAM
NTSC3.58/4.43
576i
480i
576p
480p
720p/50, 60
1080i/50, 60
Split
Strobe
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
○
HDMI
RGB(AV2, 3)
○
RGB(PC)
(○ : Available)
76
ENGLISH
Thank you for purchasing this Hitachi Television.
In the unlikely event that this product should develop a fault, we undertake to
repair or replace any part of the product which fails due to a manufacturing
defect within 12 months of the date of purchase provided that ...
1. the product has been installed and used only in accordance with the
instructions supplied with the product.
2. the product has not been repaired, maintained, or modified by any person
other than a Hitachi authorized dealer.
3. the product serial number has not been removed or altered.
•This guarantee does not apply to a product acquired second hand or for
commercial or communal use.
•This guarantee does not cover the replacement of exhausted batteries, the
adjustment of user controls, or aerial alignment.
•Any parts replaced under this guarantee shall become the property of
HITACHI EUROPE LTD.
•Please note that evidence of the date of purchase will be required before
any service under this guarantee is carried out.
Use the boxes provided below to record your TV’s Model and Serial Number - these
are found on the rating plate located on the rear of the LCD panel. Also, record where
and when you purchased this TV. This information will help any future queries you may
have and should be used in all correspondence with Hitachi service centres.
MODEL
SERIAL NUMBER
DEALER/STORE
DATE PURCHASED
This guarantee does not affect your statutory rights.
In all cases of difficulty,
please consult your Hitachi dealer.
77
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement