Hisense Group LCD3201EU Flat Panel Television User`s manual

Add to My manuals
21 Pages

advertisement

Hisense Group LCD3201EU Flat Panel Television User`s manual | Manualzz

LCD COLOUR TV

USER'S MANUAL

LCD3201EU

Part No: IES040723

Innovation is life

WELCOME TO THE PERFECT VIEW WORLD OF HISENSE LCD TV

Dear customer,

Thank you for choosing this LCD Colour TV. We expect our product and service will comfort you for long. This manual is to guide you to set up and operate your TV as quickly as possible. Please read all the safety and operation instructions carefully before you begin and then follow what the handbook tells.

SAFETY CLASS

This is an IEC safety class I product and must be grounded for safety.

Important safeguard

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

2

Preparation for your new TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Selecting a location for the TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Learning about your TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

3

Connecting your TV

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

Connecting to A / V equipments

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

4

Connecting to a computer

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Connecting to an antenna

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

5

Using the remote control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Preparing the remote control for use

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

6

Learning about the remote control

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

7

Using the TV features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Understanding the TV features

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Basic operations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

8

Using the CHANNEL menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

10

Using the PICTURE menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Using the AUDIO SETTING menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Using the PIP menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

11

Using the MENU LOCK SETTING menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

12

Using the GENERAL SETTING menu

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

13

Teletext operations

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

14

Appendix

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

The Scart Interface

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

16

Cleaning and Care

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

17

Troubleshooting

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

18

Specifications

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .

19

Design and specifications are subject to change without notice.

- 1 -

Innovation is life

FIRE AND SHOCK PRECAUTIONS

Adequate ventilation must be provided to prevent heat build up inside unit. Keep the inside of unit free from foreign objects, such as hairpins, nails, paper, etc. Do not build the set into a bookcase or other enclosures in which it would be poorly ventilated. Do not place it on carpet or a bed as low ventilation boles could become obstructed.

Do not set liquids, including flower vases and vessels filled with chemicals or water etc., On top of the unit as liquid could get inside the unit. If a hazardous object falls inside the TV set, unplug it immediately and call a qualified technician for removal.

When placing or moving the TV set, take care to insure that the power cord is fitted into the allocated slot.

To avoid damage to the power cord, never allow heavy objects such as the TV set itself to be placed on

the power cord. Keep cord away from radiating appliances. Do not allow cord to become knotted or

tangled. Do not lengthen the cord. When removing the power plug from the socket, always hold onto the

plug, never pull by the cord.

This TV set shall be connected to a main socket outlet with a protective earthing contaction

The main plug and main switch should be remain readily operable after installation

No naked flame sources,such as lighted candles, should be placed on the apparatus

Minimum distances around the apparatus for sufficient ventilation

The use of apparatus in moderate climates

WARNING

Do not remove the back cover of the TV set. Accidental contact with high voltage components could result in electric shock. When internal adjustment is necessary, please contact your distributor.

If your set produces sound but no picture, or it emits smoke or produces a strange sound or smell, continue operation is dangerous. Immediately turn off power and remove the power plug from the socket and contact your distributor.

During vacation or other occasions when you will not be using the set for an extended period, remove the power plug from the socket.

This appliance should not be operated by children or infirm persons without adequate supervision.

- 2 -

Innovation is life

Preparation for Using your new TV

Selecting a location for the TV

1)Place the TV on the floor or on a sturdy platform in a location where light does not directly hit the screen.

2)Place the TV far enough from the walls to allow proper ventilation. Inadequate ventilation may cause

overheating, which may damage the TV.

NOTE: Please contact local dealer for wall mounting.

Learning about your TV

You can operate your TV by using the buttons on the front panel or the remote control. The terminals on the back panel provide all the connections you will need to connect other equipment to your TV.

Front Controls

11

10

Back Connections

23

22

Removing the cover from back cover

22

12

24

21

13 14 15 16

17

18

21

19

20

ANT 75

R L

AUDIO

-AUDIO -VIDEO VIDEO

COMPONENT

VGA

DVI

Note: The above figures are for reference only, please refer to the actual units to determine their appearance.

- 3 -

1

Innovation is life

Preparation for Using your new TV

Power Switch

(ON/OFF)

Channel down / cursor down

Channel up / cursor up

Volume down / cursor left

Volume up / cursor right

Menu button

Source select

Power button (standby)

Headphone output

Power indicator

Remote Sensing Window

CATV antenna input

AV audio input

PC audio input

S-Video input

AV Video input

YPBPR/YCBCR input

PC VGA input

DVI input

11

22

RS232C DEBUG input

Audio AMP output R

Audio AMP output L

AC Power Socket

Scart connector

Connecting your TV

Caution: Do not plug the TV in until you have finished connecting all of your equipment.

Connecting to A/V equipments

To enjoy its multimedia features, you can connect your TV to A/V equipments such as VCR, DVD, STB, Satellite receiver, Camcorder, Audio amplifier etc., and select signal sources using your remote control. Connect the devices as shown below.

DVI

HDTV STB

1

LANGUAGE ENGLISH

VCD, DVD

Notes:1) When there is signal input on the VIDEO and S-VIDEO terminal ,SCART1 can not be connected, vice

versa.When there is signal input on the S-Video Terminal, SCART2 can not be connected; vice versa

when VIDEO or S-VIDEO terminal is connected ,selecting channel of SCART1 or SCART2 will play or

S-VIDEOcontent of VIDEO or S-VIDEO.VIDEO AND S-VIDEO terminal can not be used at the same time.

2) Modes that YPbPr\YCbCr can display include:480P/60Hz,480I/60Hz,576P/50Hz,576I/60Hz

720P/60Hz,1080I/50Hz,1080I/60Hz.

- 4 -

Innovation is life

Preparation for Using your new TV

Connecting to A Computer

You can use your TV as a monitor/speakers for your computer by connecting through its 15pin standard RGB

interface and PC audio interface. Connect the devices as shown below.

PC/NB

RGB line

L

AUDIO

R

Y

P

B

/C

B

P

R

/C

R

COMPONENT

ANT.IN

VGA DVI RS-232

Aerial

To speaker

To VGA

Audio line

NOTE: modes that PC mode can display are:VGA SVGA XGA SXGA

Connecting to an antenna

To enjoy the terrestrial signal transmitted by your local TV station, you need an indoor or outdoor antenna

(not supplied). Perfect picture quality requires a good signal and generally means that an outdoor antenna must be used. The exact type and location of the antenna will depend on your particular area. Consult your

local dealer or service personnel for best advice. If you are a subscriber of your local CATV net, the outdoor or indoor antenna is not needed. Connect the equipments as the following figure.

Plug(not supplied)

COAXIAL CABLE (75W )

TWIN-LEAD FEEDER(300 W )

The signal comes from:

An outdoor antenna

An indoor antenna

CATV net

Adaptor (not supplied)

Loosen the screw Insert the feeder in

Tighten the screw

ANTENNA SOCKET

ANT 75

- 5 -

Using the remote control

Preparing the remote control for use

Installing the remote control batteries

1. Open the battery cover on the back of the remote control.

Innovation is life

2. Install two AAA size(1.5V) batteries. Match the + and - signs on the batteries to the signs on the battery compartment.

3. Close the battery cover.

Note:

1.Dispose of your batteries in a designated disposal area. Do not throw batteries into fire.

2.Do not mix battery types or combine used batteries with new ones.

3.Remove dead batteries immediately to prevent battery acid from leaking into the battery compartment.

4.If you do not intend to use the remote control for a long time, remove the batteries.

5.The effective range of remote control is suggested in the figure.

- 6 -

30

3m 8m

30

3m

1m

30

8m

30

1m

Innovation is life

Using the remote control

Learning about the remote control

Power

Channel Number : Direct channel

selection

Recall : Return to previous channel

P.Mode : Select picture mode

CH+ : Channel up

VOL- : Volume down

CH- : Channel down

S.Mode : Select sound mode

Zoom : Adjust zoom ratio

Still : Snapshooting

Video : Switch to SCART1 or

SCART2 or AV and TV mode

YPbPr : Switch to YPbPr mode

YCbCr : ABORT key

Recall

P.Mode

VOL-

Display

Text

CH+

Menu

VOL+

CH-

S.Mode

Mute

Zoom

Video

YPbPr

Still

S-Video

YCbCr

II IIII

PC

Time

HYDFSR-EP209C1

Power : Power on/off

Red/Green/Yellow/Cyan buttons :

Fasttext

Display : Display current input

Text : Enter/exit Teletext mode

VOL+ : Volume up

Menu : Call up the main menu

Mute : Mute the sound

: Mono/Stereo operation

PC : Switch to PC/DVI mode

S-Video : Switch to SCART1-YC

or S-VIDEO mode

Time : Adjust the sleep time

- 7 -

Innovation is life

Using the TV features

Understanding the TV features

Multimedia - TV receiver, Video monitor and PC display, all in one.

Wider viewing angle, 16:9 display - 170 viewing angle at typical value

Digital display device - truthfully reproducing the images, without distortion or blurring, irrespective

of magnetic or geomagnetic effect.

200 channels storage

Sleep timer

Teletext with 252 pages memory

NICAM

Dual SCART interface

Multi-language OSD

Basic Operations

Power ON/OFF

1) Connect the TV to power outlet and turn on the power switch, the power

indicator will be red and then turn blue.Several seconds later, TV picture

will display on the screen.

2) Press the Power button on the front control or on the remote control to make

the TV on standby.Press the power switch to turn off power.

3) If you decide to shut off the TV for a long time, it is recommended that you unplug the power from the outlet.

POWER

INDICATOR

POWER BUTTON

(STANDBY)

Signal source selection

Press the number [1-9] button or [CH+/CH- ] button to select TV input; press the [VIDEO] button to select TV , scart1 and scart2 input in turn; press the [S-VIDEO] button to select S-VIDEO input ;press the [ YPbPr]

button to select YPbPr input; press the [PC] button to select VGA or DVI input.

NOTE: 1).When you press the [YCbCr]button,will display

ABORT KEY in screen

2).

In Video channel Of scart1 or scart2,if you want quit from scart1 or scart2,you can press the [VIDEO] button to select TV,or convert other signal source,for example ,to press the [YPbPr] button to select YPbPr input.

Select channels by [CH+/CH-]

You can also use[CH+ / CH-] to select channels. [CH+] i ndicates channel number increase; [CH-] indicates channel number decrease.

- 8 -

Innovation is life

Using the TV features

Select channels by numbers

To select a channel : Press the channel numbers in series to select channel directly.

For example, to seclect channel 120, Press the button 1, and 1_ _ will display on the top right corner of the screen,

then press the button 2, 12_ will display, press the button zero, you can enjoy the program of channel 120.

NOTE:

1) When you changing the channel, the sound state graphics can be displayed below the channel number. There

are 3 sound states in this TV. If the sound is mono, the graphics is , If the sound is stereo, the graphics is

If the sound is NICAM dual I/II, the graphics is .

There are two symbol at right of the sound state graphics,

Which indicate preset of picture system and sound system.

2) When you changing the channel, the sound of current channel will be firstly changed to stereo or NICAM dual I

according to the sound state of current channel. You can press the

I/II button on the remote control to change

current sound type.

3) When you press the 0 channel . The AV source will be seleced . When you press the VIDEO button ,It will

return TV source.

Adjust Volume

When menu is not displayed on the screen, press [VOL+ or VOL-] to adjust the volume.

Use [Recall] button

Press the [ Recall ] button repeatedly to alternate between the present channel and the previous channel.

Display channel number

Press [Display] button to display the present channel number, but it will also disappear 6 seconds after your pressing.

Select picture modes

You can select the picture mode from among three preset modes and one user-set mode. Press the [ P.mode ] button repeatedly to select the desired picture mode.

NORMAL

USER

SOFT

BRIGHT

Select sound modes

You can select the sound mode from among three preset modes and one user-set mode. Press the [ S.mode ] button repeatedly to select the desired sound mode.

Use [Still] button

Press the [ Still ] button to snapshot the present picture, and press again to return to normal watching.

SPEECH

NORMAL

USER

MUSIC

Use [ Zoom ] button

Press the [ Zoom ] button to adjust the screen aspect ratio and zoom ratio

Mute function

Press [ Mute ] button repeatedly to switch between mute and unmute mode.

- 9 -

Innovation is life

Using the TV features

Using the CHANNEL menu

PROGRAM

CHANNEL

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item CHANNEL.

3) Press the [CH+ or CH-] button to select PROGRAM.

4) Press the [VOL+ or VOL-] button to select the present channel.

PROGRAM

SOUND SYSYTEM

Sound system

You can set sound syetem.

AUTO SEARCH

MANUAL SEARCH

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item CHANNEL

FINE TUNE

SKIP

3) Press the [CH+ or CH-] button to select sound system.and press

the [VOL+] button to enter sound system

4) Press the [VOL+ ] button to switch among AUTO D/K B/G I L/L`

CHANNEL EDIT

AUTO-SEARCH

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item CHANNEL.

3) Press the [CH+ or CH-] button to select AUTO SEARCH.

4) Press the [ VOL+] button to start auto searching.

MANUAL-SEARCH

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item CHANNEL.

3) Press the [CH+ or CH-] button to select MANUAL SEARCH.

4) Press the [ VOL+ or VOL-] button to start MANUAL searching.

FINE TUNE

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item CHANNEL.

3) Press the [CH+ or CH-] button to select FINE TUNE.

4) Press the [ VOL+ or VOL-] button to start FINE searching.

SKIP

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item CHANNEL.

3) Press the [CH+ or CH-] button to select SKIP.

4) Press the [VOL+] button to skip or unskip the present channel.

NOTE: The 'skipped' channels cannot be accessed by [CH+ or CH-] , but you can access them by digit (direct select) button.

CHANNEL EDIT

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item CHANNEL.

3) Press the [CH+ or CH-] button to select CHANNEL EDIT.

4) Press the [ VOL+] button to start CHANNEL EDIT.

-10 -

Using the TV features

Using the PICTURE menu

PICTURE PARAMETERS

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item PICTURE

PARAMETERS.

3) Press the [CH+ or CH-] button to select the item you want to adjust.

.

4) Press the [VOL+ or VOL-] button to adjust the level.

5) The adjusted data is stored automatically in the user mode.

NOTE : The COLOUR TEMP is only to adjust in the PC mode.

BRIGHTNESS

CONTRAST

SATURATION

COLOUR TEMP

FLESHTONE

SHARPNESS

NOISE REDUCE

Innovation is life

Using the AUDIO SETTING menu

Adjust audio settings

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item AUDIO SETTING.

3) Press the [CH+ or CH-] button to select the item you want to adjust.

4) Press the [VOL+ or VOL-] button to adjust the level.

5) The adjusted data is stored automatically in the user mode.

AUDIO SETTING

BASS

TREBLE

BALANCE

Using the PIP menu

1) Press the MENU button to enter the main menu ,press the

[VOL+ or VOL-] to select the PICTURE IN PICTURE.

2) Press the [CH+ or CH-] button to select the PIP SIZE, and

press the [ VOL+] button to enter the PIP SIZE, Press the

[CH+ or CH-] button to select the OFF/PIP/PBP .

3) Press the [CH+ or CH-] button to select the PIP SOURCE, and

press the [ VOL+] button to enter the PIP SOURCE, Press the

[CH+ or CH-] button to select the pip source.

4) Press the [CH+ or CH-] button to select the PIP POSITION or PIP

PICTURE IN PICTURE

PIP POSITION

PIPSIZE

PIP BRIGHTNESS

PIP CONTRAST

PIP SOURCE

BRIGHTNESS or PIP CONTRAST, press the [VOL+ or VOL-] button to adjust the value.

Note: 1) When main picture is TV/ SCART1/ S-VIDEO. pip picture is YPbPr/VGA/DVI.

2) When main picture is YPbPr/VGA/DVI. pip picture is TV/ SCART1/S-VIDEO

-11 -

Using the TV features

Using the MENU LOCK SETTINGS menu

LOCK MENU

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item MENU

LOCK SETTINGS.

3) Press the [CH+ or CH-] button to select the LOCK MENU.

4) Press the [VOL+ ] button to enable the LOCK MENU .

MENU LOCK SETTINGS

LOCK MENU

SET PASSWORD

Innovation is life

SET PASSWORD

Password is a four-digit number. The preset password is 1111.

If you want to change the password,you must enter the preset password.

1) Press the [CH+ or CH-] button to select SET PASSWORD,and enter the

preset password.

Enter the menu lock password

______

OK CANCEL

1) Press the [CH+ or CH-] button to select SET PASSWORD,

and press the [ VOL+] to enter SET PASSWORD.

2) Input the new password , So you succeed in changing the password.

OK

Setting password

-12 -

Innovation is life

Using the TV features

Using the GENERAL SETTINGS menu

OSD POSITION

GENERAL SETTINGS

1) Press the [MENU] button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item GENERAL

SETTINGS

3) Press the [CH+ or CH-] button to select OSD POSITION

4) Press the [VOL+ or VOL- or CH+ or CH-] button to

adjust the OSD POSITION

LANGUAGE ENGLISH

OSD POSITION

COLOUR SYSTEM

OSD LANGUAGE

BLANK

SLEEP TIMER

Colour system

You can set colour syetem.

1) Press the [MENU] button to enter the main menu.

TRANSPARENCY

DEINTERLACER

2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS

3) Press the [CH+ or CH-] button to select colour system .and press

the [VOL+] button to enter colour system

4) Press the [VOL+ ] button to switch among AUTO, PAL ,SECAM.

OSD LANGUAGE

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

CHANGE PASSWORD

to enter the OSD LANGUAGE

4) Press the [ VOL+] button to select the language what you want use.

BLANK

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS.

3) Press the [CH+ or CH-] button to select BLANK

4) Press the [ VOL+] button to enable the BLANK

NOTE: When you enable the blank,the screen will turn into blue screen saver mode in case of valid input

signal, The screen will turn into auto screen saver mode several seconds later,and into stand-by mode 15

minutes later.

SLEEP TIMER

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS

3) Press the [CH+ or CH-] button to select SLEEP TIMER

4) Press the [ VOL+-] button to adjust the SLEEP TIMER

TRANSPARENCY

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS

3) Press the [CH+ or CH-] button to select TRANSPARENCY

4) Press the [ VOL+ or VOL-] button to adjust the volume of transparency

-13 -

Innovation is life

Using the TV features

Using the GENERAL SETTINGS menu

DEINTERLACER

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item GENERAL SETTINGS

3) Press the [CH+ or CH-] button to select DEINTERLACER

4) Press the [ VOL+ ] button to enter the DEINTERLACER

5) Press the [ CH+ or CH-] button to select the feature

Using the PC menu

1) Press the MENU button to enter the main menu.

2) Press the [VOL+ or VOL-] button to select the item

PC PARAMETERS.

3) Press the [CH+ or CH-] button to select the item you

want to adjust.

NOTE: 1)The menu is useful only on VGA/DVI and HDTV mode.

It is useless in others mode.

2) The button [AUTO] is used to adjust position of picture automatic and it is effective only on VGA/DVI mode.

The button [ AUTO COLOUR] is used to adjust quality of picture manually when signal is not good sometimes.

The button [POSITION] is used to adjust the position of picture.

CLOCK and PHASE can adjust quality of picture minutely, and they are used less.

Teletext Operations

PC PARAMETERS

CLOCK

PHASE

POSITION

AUTO COLOUR

SELECTING TELETEXT MODE

Select the channel that is broadcasting the desired Teletext program.

Press [ TEXT ] button and alternate between Teletext mode and normal mode.

Note: All the operations below should be under the Teletext mode except TIME operation.

PAGE SELECTION

You can directly input your desired page number by pressing [0~9] buttons.

You can sequentially read pages by pressing [ or

] button.

HOLD

Some Teletext information is contained on more than one page, the pages automatically changing after a given reading time.

Press [ S-Video ] button to stop the page changing.

Press [ S-Video ] button again to allow the page to change.

-14-

Innovation is life

Using the TV features

Teletext Operations

REVEAL

Some Teletext pages contain quiz or questions with hidden answers.

Press the [ ] button to see the answers.

Press the [ ] button again to hide the answers.

CANCEL

When a page is selected in Teletext mode it may take some time before it becomes available.

Press the [ YPbPr ] button to switch to the TV mode.

When the required page is found, the page number will appear at the top of the TV picture, press the [ YPbPr ] button to return to the selected Teletext page.

Note: You can change TV program while in this mode.

SUB CODE

Some Teletext pages contain sub page that require you to input the sub code.

Press [ P.mode ] button until ***|**** is displayed, and enter last four-digit sub code for the sub page you need.

MIX

You can mix Teletext with TV pictures, which means transparent teletext.

Press [ Video ] to mix, and press [ Video ] again to cancel the mixed effect.

ZOOM (Top/Bottom/Full)

Using ZOOM to enable easier reading (larger display).

Press the [ PC ] button to display the TOP HALF of the page.

Press again to display the BOTTOM HALF of the page.

Press again to return to a FULL PAGE display.

Note: Changing pages reverts to a FULL PAGE display.

TIME

Time information is contained in the teletext broadcast.

In Teletext mode, press [ Time ] to display the time.

FAST TEXT

The RED, GREEN, YELLOW & CYAN buttons are used for quick access to colour coded pages

transmitted by FAST TEXT broadcast.

INDEX

Teletext index page guides you quickly to your desired page.

Press [ S.mode ] button to enter index page.

-15 -

Innovation is life

Appendix

The SCART interface

Also known as Peritel, this standard provides a cheap multi-signal connector to domestic TVs and other video equipment.

Arrangement 1 is the original and allows for composite video input/output,

S-Video inputs, RGB inputs and audio input/output.

Arrangement 2 allows for composite video input/output and audio input/output.

Scart Connector Pinout Details

Pin Signal

1 Audio output B (right)

2 Audio input B (right)

3 Audio output A (left)

4 Ground (audio)

SCART arrangement 1

Signal level

0.5V rms

0.5V rms

0.5V rms

-

Impedance

<1kohm

>10kohm

<1kohm

-

5

6

7

8

Ground (blue)

Audio input A (left)

Blue input

Function select (AV control)

-

0.5V rms

-

>10kohm

0.7V

75ohms

High (9.5-12V) - AV mode

>10kohm

Low (0-2V) - TV mode

9 Ground (green)

10 Comms data 2

11 Green input

12 Comms data 1

13 Ground (red)

-

0.7V

-

14 Ground (blanking) -

15 Red input/Chrominance input 0.7V/0.3V

75ohms

-

-

75ohms

16 RGB switching control

17 Ground (video input & output) -

18

Ground(RGB Switching Control)

-

High (1-3V) - RGB

Low (0 -0.4V) -

Composite

75ohms

-

-

19 Video output (composite)

20 Video input (composite)

/Luminance input

1V including sync

1V including sync

75ohms

75ohms

21 Common ground (shield) -

-16 -

Innovation is life

Appendix

Pin Signal

1 Audio output B (right)

2 Audio input B (right)

3 Audio output A (left)

4 Ground (audio)

5 Ground

6 Audio input A (left)

7 -

8

SCART arrangement 2

Signal level

0.5V rms

0.5V rms

0.5V rms

-

-

0.5V rms

-

Function select (AV control)

Impedance

<1kohm

>10kohm

<1kohm

-

-

>10kohm

-

High (9.5-12V) - AV mode

Low (0-2V) - TV mode

>10kohm

9 Ground

10

-

11 -

12

-

-

-

-

-

13 Ground

14 Ground (blanking)

-

15 -

16 -

17 Ground (video input & output) -

-

-

18 -

19 Video output (composite)

20

Video input (composite)

21 Common ground (shield)

-

1V including sync

1V including sync

-

-

-

-

-

-

-

-

-

-

-

75ohms

75ohms

-

WARNING: Do NOT attempt to work on ANY equipment unless you KNOW what you are doing.

When scart1 or scart2 is pluged in, do not connect S-video and video from TV back

Cleaning and care

WARNING: Do not try to remove the cabinet back. Refer servicing to qualified service technicians.

To clean the TV screen:

1) Unplug the TV to avoid possible shock hazard.

2) Use a clean cellulose sponge or chamois cloth dampened with a solution of mild detergent and warm

water to clean the TV screen and trim. Do not use too much water as water spilled into the cabinet

can cause damage to the TV.

3) Wipe off any excess moisture with a clean dry cloth.

4) Polish the cabinet with a quality furniture polish to maintain the finish and appearance of the cabinet.

Caution: Never use strong solvents such as thinner, benzene, or other chemicals on or near the cabinet.

These chemicals can damage the finish of the cabinet.

-17 -

Innovation is life

Appendix

Troubleshooting

Before calling a service technician, please check the following table for a possible cause of the problem and some solutions.

Symptoms

TV will not turn on

No picture, no sound

No sound, picture OK

Poor sound, picture OK

Poor picture, sound OK

Unable to select a certain channel

Possible Solutions

Make sure the power cord is plugged in, then press [Power].

The remote control batteries may be dead. Replace the batteries.

Check if you have set the off timer.

Check the antenna/cable connections.

Press [Display] to see if you have select the right signal source.

The sound may be muted. Press

[ >]

on the remote control or .

The station may have broadcast difficulties. Try another channel.

Check the speakers cable connections.

The station may have broadcast difficulties. Try another channel

Check the speakers cable connections.

Check the antenna connections.

The station may have broadcast difficulties. Try another channel.

Adjust the picture from the menu.

The channel may be skipped. See SKIP on page 10.

Poor colour or no colour

The remote control does not operate

Disorder display at power on

The station may have broadcast difficulties. Try another channel.

Adjust the HUE and COLOUR in the menu.

There may be an obstruction between the remote control and the

remote control sensor.

The batteries may be installed with a wrong polarity.

The remote control batteries may be dead. Replace the batteries.

Check if you have entered Teletext mode. Press [ Text ] to quit.

This may be caused by too short interval between power off and on.

Unplug the power and restart.

Caution: If there is NTSC signal. The display is abnormal or black. You may press the MENU. Then

operation is normal.

-18 -

Specifications

LCD panel

Television system

32.0 inches TFT LCD

Multi- standard(PAL,SECAM)

LCD3201EU

Channel coverage

Resolution

Contrast

Brightness

Viewing angles

Power source

Power consumption

Audio output

Connection interface

VHF-L: E2-S8

VHF-H: S9-S37

UHF: S38-E69

1280X768

500:1

450cd/m

2 o

AC100V--240V, 50/60Hz

145W

5W+5W

RF

VIDEO input: S-VIDEO

YPBPR 1

1

GRAPHIC input: Analog RGB 15pin(VGA) 1

Digital RGB(DVI-D) X1

AUDIO input: SCART 1 audio and SCART2 audio

AUDIO output: SCART 1 audio and SCART2 audio

(3.5 )X1 Mini-jack for stereo

SCART INPUT: SCART1

SCART2

OTHER: RS232C X 1 (for software updateing)

Innovation is life

Dimensions

39inchesX23inchesX8.7inches

Weight

24Kg

Supplied accessories Remote control, AC Power cord, Batteries

Design and specifications are subject to change without notice.

-19 -

advertisement

Related manuals

advertisement