Motorised butterfly valve DMK Nominal Diameters DN 40 to DN 125

Motorised butterfly valve DMK Nominal Diameters DN 40 to DN 125
Motorised butterfly valve
DMK
Nominal Diameters
DN 40 to DN 125
Printed in Germany • Rösler Druck • Edition 02.08 • Nr. 226 595
11.11
1…6
Technical description
The DUNGS DMK... motorised butterfly
valve is an actuator without zero shut-off
as per DIN 3394 Sheet 2.
The intermediate-flange design saves
space when it is mounted directly on
DUNGS multiple actuators, solenoid
valves and other valves:
- max. operating pressure 500 mbar
- max. differential pressure 100 mbar
- group R0 as per DIN 3394 Sh. 2
- standard actuator drives:
DMA...P..., DMA...Q...
other drives available on request.
Application
The DUNGS DMK... motorised butterfly
valve is used for controlling the gas supply
to gas burners and gas-burning appliances. The motorised butterfly valve is
suitable for gases of families 1, 2, 3 and
other neutral gaseous media.
Free of non-ferrous metals, suitable for
gases up to max. 0.1% by vol. H2S, dry.
Approvals
EC type test approval as per EC Gas
Appliance Directive:
DMK 5...
CE-0085 AP0165
Approvals in other important gas consuming countries.
DMK
Actuator with no zero shut-off for control tasks. Prepared for mechnical and
electromechanical actuator drives.
Technical data
Nominal diameters
DN
40
50
65
80
100
125
Intermediate flange to fit preweld flange as per DIN 26 33 (PN 16) DN 40-DN
125, ISO 7005-1 (PN 16), ISO 7005-2 (PN 16)
Max. operating pressure
500 mbar (50 kPa)
Max. differential pressure
100 mbar (10 kPa)
Actuator
Actuator as per DIN 3394 Sh. 2, Group R0
Gap volume flow in
closed position (O°)
see Diagram 1
Torque
max. 150 Ncm
Adjusting angle
max. 90°
Throat valve diameters
DMK 5040
DMK 5050
DMK 5065
DMK 5080
DMK 5100
DMK 5125
Gas-conveying component
materials
Housing
Shaft Seals
Ambient temperature
-15 °C to +70 °C
Installation position
Any installation position; comply with technical data of actuator drive
40 mm
50 mm
65 mm
80 mm
100 mm
125 mm
Aluminium
Steel
NBR
For technical data of actuator drives type DMA..., see Data Sheet 11.20
2…6
Functional description
The DUNGS motorised butterfly valve
is an automatic actuator driven by
auxiliary energy.
The electromechanical actuator drive
determines the butterfly valve position.
Valve partial load and full load adjustment is defined by adjusting the related
actuator drive switching cams.
The actuating time depends on the
actuator drive selected.
If the operating voltage (auxiliary energy) is interrupted, the actuator remains
in its current position.
Installation
- When installing, refer to the flow
direction (➞ arrow) on the housing.
- Keep to the specified installation
position.
DMK 5040
Valve position
90°
40
102.2 0.85
50
0°
Only set the nominal pressure on the pressure regulator. Any output-related restriction should only be performed
using the motorised butterfly
valve.
Check for leaks and function after installation.
kV values of valves with preferred throat diameters
Preferred diameters [mm]
Avoid direct contact between the motorised butterfly valve and dried masonry,
concrete walls or floors.
DMK 5050
DMK 5065
DMK 5080
DMK 5100
DMK 5125
90°
90°
90°
90°
90°
0°
0°
0°
0°
131.4 1.35
65
80
255.5 2.59
357.7 3.28
100
565.75 4.0
125
Selecting the device
You must know the following values to
select the DMK variant:
1.Maximum volume flow Vmax
2.Pressure loss ∆p at maximum volume flow
3.Minimum volume flow Vmin
4.Differential pressure in the closed
valve position (= pe)
You can either determine the throat diameter by calculation using the kV value
or using diagrams 1, 2, 3 and 4.
Check whether the required minimum
volume flow is reached when the valve
is positioned at 0°. If the calculated or
measured value is below the required
minimum volume flow, the valve can
be used.
3…6
0°
1204.5
If the volume flows are small, the
pressure loss of upstream devices
will fall. This increases the ∆p
available to the valve. To obtain an
optimum control response, always
choose the valve with the largest
pressure loss (∆p>20 mbar).
KV value for DMK motorised butterfly valve
The DMK motorised butterfly valve is
limited by the following parameters:
operating pressure pmax = 500 mbar
differential pressure ∆pmax= 100 mbar
5.48
When the valve is used in subcritical
flow states, the following applies:
VN [m3/h]
volume flow, standard state
∆p [bar]
pressure drop across DMK
p2 [bar]
absolute pressure downstream
of DMK
ρn [kg/m3]
standard gas density
T1 [K]
absolute gas temperature upstream of DMK
Vn = 514 • kV •
∆p • p2
ρn • T1
�����
�����
����
����
����
����
Flow diagram 1
DMK 5040 - DMK 5125
Vmin valve position 0°
Valve closed
���
��
��
��
��
���������
��
�������������
��
��
�
�
�
�
�
�
�����������������������������������������
���������������������������������
������������������������������������
��������������������������������������
�
�
� � � � � � ���
��� ��� ������
�
�
�����
�������������������������������
��
�� �� ��
�� ��
��� ������
�
� � � � � � ���
��
�� �� �� �� ��
�
�
�����
��������������������������������������������������������������
���������
���������
Flow diagram 2
DMK 5040 - DMK 5080
Vmax valve position 90°,
Valve open
���
��
��
��
�������������
��
���������
��
��
��
�
�
�
�
�
�
�����������������������������������������
���������������������������������
������������������������������������
��������������������������������������
�
��
��
��
��
�� �� ���� ���� ���
���
��� ���
��� �������
�
�
��������������������������������������
�� �� �� �� ���� ���
���
���
��� ���
����
���� ���� ���������
���� ���� ���������
�����
�����
�
�
��������������������������������������������������������������
4…6
����������
���������
Flow diagram 3
DMK 5050, DMK 5100
Vmax valve position 90°
Valve open
���
��
��
��
�������������
��
���������
��
��
��
�
�
�
�
�
�
�����������������������������������������
���������������������������������
������������������������������������
��������������������������������������
�
��
��
��
��� ���
��� �������
�
�
��������������������������������������
�� �� �� �� �������
��
���
�� �� ���� �������
���
���
����
��� ���
���� ���� ���������
���� ���� ���������
�����
�����
���������
Flow diagram 4
DMK 5065, DMK 5125
Vmax valve position 90°
Valve open
����������
�
�
��������������������������������������������������������������
���
��
��
��
��
�������������
���������
��
��
��
�
�
�
�
�
�
�����������������������������������������
���������������������������������
������������������������������������
��������������������������������������
�
��
��
��
��
�� �� �� �� �������
���
��� ���
��� ��� ����
�
�
��������������������������������������
�� �� ���� �������
���
���
��� ���
����
���� ���� ���������
���� ���� ���������
�
�
��������������������������������������������������������������
5…6
�����
�����
Edited by Foxit PDF Editor
Motorised butterfly valve
Copyright (c) by Foxit Software Company, 2004
For Evaluation Only.
DMK
Nominal diameters DN 40 to DN 125
�
�
�
Dimensions [mm]
DMK 5040...5125
B
�
�
�
�����
�
��
Type
DN
ø [mm]
A
��
B
C
D
Comment
Order No.
42
92
for DMA...P
225 975
DMK 5040
40
40
40
93
DMK 5050
50
50
40
105
48,5
98,5
for DMA...P
225 978
DMK 5065
65
65
40
125
59,5
109,5
for DMA...P
225 981
DMK 5080
80
80
40
140
67
117
for DMA...P
225 984
DMK 5100
100
100
40
160
77
127
for DMA...P
225 987
DMK 5125
125
125
40
192
89,5
139,5
for DMA...P
225 990
E
F
G
øShaft
Comment
Order No.
Actuators
Type
DMA 40 P 230/02 3
DMA 40 P 230/02 4
DMA 30 P 230/03 0
IP 40
IP 40
IP 40
65
65
65
99
99
99
66
114
114
8
8
8
DMA 30 Q 230/05 3
DMA 30 Q 230/05 0
IP 54
IP 54
90
90
136
136
149
149
10
10
Mounting kit DMA...Q
226 240
238 810
226 239
Mounting ex works
Mounting ex works
252 723
252 721
Mounting ex works
252 725
When ordering, please specify actuator!
We reserve the right to make any changes in the interest of technical progress.
Internet www.dungs.hu
6…6
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement