Gallagher Controller 6000

Gallagher Controller 6000
Gallagher
Controller 6000
The Gallagher Controller 6000 has the ability to enforce business rules, monitor its environment,
communicate with other integrated systems and make offline access decisions.
The Gallagher Controller 6000 (C6000) is the interface between the Gallagher Command Centre Server
and the distributed field hardware. Capable of processing, storing and communicating data in real time
when the Gallagher Command Centre Server is offline. The Controller 6000 uses straight forward
system architecture to provide powerful and flexible configuration.
Key features:
• Has two RS485 connections, which may be individually configured
to support HBUS, GBUS, SensorBUS or AperioTM communications
• Provides connectivity to the 4H & 8H HBUS device modules as
well as 4R & 8R reader modules
• Communicate directly with other Gallagher Controllers without
requiring the Gallagher Command Centre server to be online over
a LAN/WAN using TCP/IP for the purposes of monitoring, back-up
and control
• Provides I/O functionality via the Controller reader modules and
other I/O expansion options are also available
• Communicates via the 4H or 8H modules with Gallagher Readers
using the high speed HBUS RS-485 protocol
• Provides onboard front and rear tamper control
• Controls up to ten doors when paired with module choices available
to cater for a wider range of site requirements
• Provides a cost-effective approach to engineering a Gallagher
system through its modular design
security.gallagher.co
• USB port (USB2.0) is available as an alternative to the network
connection for securely loading software configuration into the
Controller. The USB port can also be used for connection to a
cellular modem for alarm transmission. • Send and receive events
from third party systems within the C6000 using the Gallagher
Controller Application Programming Interface (API)
• Provides elevator access control
• Supports the Gallagher Remote Arming Terminal for management
and operation of intruder alarm functions and the Gallagher
Perimeter Security Fence Controller for integrated perimeter
security.
• Supports alarm management and remote alarms transmission via
multiple mediums:
• LAN/WAN networks using TCP/IP protocol
• Cellular networks, via cellular modem
• PSTN Alarms, via Gallagher Dialler
Key features of the Gallagher Controller 6000 and 8H Module
DIP SWITCHES
AUXILLIARY RS232 PORT
controller POWER IN
PRIMARY 10/100/1000
BASET ETHERNET PORT
RS485 PORTs
SECONDARY 10/100/1000
BASET EtHERNET PORT
(6000hs only)
In service relay
(6000hs only)
4 STATE BALaNCED
INPUTS
hbus device
CONNECTIONS
POWER OUT
USB PORT
4-STATE BALANCED INPUTS
hbus device
CONNECTIONS
POWER OUT
relay common
relay common
relay outputs
relay outputs
hbus module POWER IN
Ethernet connection to
Gallagher Command Centre
and other Gallagher Controllers
Cellular Alarms
Module
Cellular
Network
IP Alarms
Transmission
Gallagher
Controller
6000
LAN/WAN
Internet
To remote
monitoring station
To remote
monitoring station
Gallagher Dialler
(plug-in optional)
2 RS485
runs are
available
Gallagher 4H or 8H Module
12 Inputs / 4 Outputs (4H)
24 Inputs / 8 Outputs (8H)
Maximum of
20 T Series
Readers
AND
25 F22 Fence
Controllers per
Gallagher
Controller 6000
HBUS RS485
Gallagher
T10
Reader
Gallagher
T11
Reader
Gallagher
T12
Reader
Gallagher
F22 Fence
Controller
Gallagher
T10
Reader
GBUS
RS485
Gallagher
Security
Fence
Keypad
Gallagher
Remote
Arming
Terminal
4
devices
maximum
Gallagher
GBUS Universal
Reader
Interface
Gallagher
High Density
I/O Interface
8
devices
maximum
Gallagher
8-Input
Expansion
Interface
Gallagher
I/O
Expansion
Interface
Gallagher
T11 or T12
Reader
Gallagher Controller 6000
August 2012
Factory programmed with a unique network MAC address;
MicrosoftTM Windows CE 6
Operating System
Power Supply
Voltage
Current
(measured at 13.6 V DC with module connected)*
Relays Operating
13.6 v DC±15%
No relays
4 relays
8 relays
Controller 6000
175mA
320mA
460mA
Controller 6000HS
610mA
730mA
870mA
* Note: Current measurements are indicative only and exclude external devices. Currents have been rounded up to the nearest 5mA. Controller 6000HS measurements include the
use of both primary and secondary high speed ethernet ports. Please refer to the Gallagher Connectivity Guide and product Installation Notes for detailed power supply and operating
characteristics
Temperature Range
Gallagher Controller 6000
-10 to +70C
Gallagher Controller 6000 High Spec (HS)
-10 to +55 C
Humidity
95% Noncondensing
Data Storage per Gallagher Controller 6000
Max. number of access zones
Unlimited
Max. number of alarms zones
256
Number of events
80,000
Max. number of access groups
2,000
Max. number of doors
10
Max. number of time schedules
400
Max. inter-controller peer to peer
connections
60
Number of cardholders
500,000
RS485 Device Communications (2 Ports)
Network Communications
HBUS
Up to 1 Mbits per second, 500m (1640ft)
GBUS
38.4 Kbits per second 1200m (1640ft)
Sensor Bus
115.2kbits per second, dependent on cable type
Aperio
19.2kbits per second, 1000m max.
Network connection - Controller 6000
10/100 BaseT Ethernet Port
Network connection - Controller 6000 High Spec
10/100/1000 BaseT Ethernet Port (2 ports)
Network protocol
Compliance Standards
TCP/IP - 256 bit AES symmetric encryption for Controller to Server and
Inter-Controller communications
CE, A-Tick, C-Tick, FCC and UL
Gallagher Modules
Device Connectivity
Reader Connections
HBUS Connections
Inputs
Relay Outputs
DC Outputs
-
4
12
4
2
-
8
24
8
4
4
2
-
12
4
2
8
4
-
24
8
4
Gallagher
Wiegand
Gallagher 4H Module
-
Gallagher 8H Module
-
Gallagher 4R Module
Gallagher 8R Module
Data Format
Relay Specifications
4R / 8R Modules
Cardax IV & Wiegand Readers
4H/8H Modules
HBUS Readers & F22 Fence Controllers & Z10
Tension Sensor
Resistive load
3 A at 24 V DC/AC
Inductive load
1 A at 24 V DC/AC
DC Outputs
0.5 A per output
Elevator Control
Max. Number of shafts per
Controller 6000
Gallagher Cabinets
Refer to Gallagher Cabinet datasheet
Part Numbers
75 (low level)
256 (high level)*
Gallagher Controller 6000
C300100
Gallagher 4R Module
C300141
Gallagher Controller 6000 High Spec
C300101
Gallagher 4H Module
C300142
Gallagher Cabinet
C200104
Gallagher 8R Module
C300181
Gallagher Dual Cabinet (with power supply)
C200105
Gallagher 8H Module
C300182
Gallagher World Headquarters
Kahikatea Drive, Hamilton 3206
Private Bag 3026, Hamilton 3240
New Zealand
TEL: +64 7 838 9800
EMAIL: [email protected]
security.gallagher.co
REGIONAL OFFICES
New Zealand.................................... +64 7 838 9800
Americas....................................... +1 888 430 0770
Asia................................................ +852 2910 7912
Australia....................................... +61 2 9412 4477
India............................................ +91 80 2661 1590
Middle East........................................+9615 808728
South Africa................................. +27 11 974 4740
United Kingdom / Europe........... +44 2476 64 1234
Disclaimer: System configuration, network capacities and the
volume of system activity affect performance. Please contact
Gallagher for advice. In accordance with the Gallagher policy of
continuing development, design and specifications are subject
to change without notice. Gallagher Group Limited is an ISO
9001:2008 Certified Supplier. Copyright © Gallagher Group
Limited 2012. All rights reserved.
3E2057 – 01/13
Notes: 1. Compliance with other international standards will be proven as required. Please contact Gallagher for the latest list of approvals.
All Gallagher products must be installed in accordance with the Installation Notes to comply with international standards. 2. System configuration, network capabilities, and the volume
of system activity affect performance. Please contact Gallagher technical support for advice. * Elevator system dependant
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement