ACM ™ Advanced Communication Module
ACM ™ Advanced Communication Module Over the years, Internet and Intranet enabled applications have become popular management tools, especially for multi-site corporations. RISCO Group has recognized the needs of organizations to link their security systems with LAN/WAN networks. The state-of-the-art ACM™ enables IP connectivity for ProSYS Security Systems, providing secure and efficient monitoring and access to security systems located at multiple sites. ProSYS ACM™ enables you to: Increase your security and monitor your facilities effectively Fast IP network connectivity will enable you to monitor your multi-site security systems on-line, request status reports from the panels, collect or perform daily maintenance such as scheduling or arm/disarm; all from your PC. You can also receive email messages of events you define for security or maintenance purposes. Easily integrate with other systems The ACM™ has an open-architecture design, meaning that every communication protocol and every interface is designed according to industry standards. This allows for easy integration with other systems and addition of future innovative products. Use multiple channels of TCP/IP communication for concurrent operation and monitoring The ACM™ enables you and your security officers to simultaneously access the ProSYS system from multiple PCs, together with concurrent alarm reporting from the panel to the control room. Use your existing IP network infrastructure and reduce your phone bill costs Connect RISCO Group’s ProSYS with ACM™ to your IP network and use it for security communication between the panels and the control room. This alone will amount to enormous cost savings due to elimination of the daily recurring, and often long-distance, phone calls associated with alarm communications. 7LF720A4B ACMTM Features Provides IP connectivity over networks supporting the TCP/IP protocol (LAN and WAN) Fully supervised accessory of the ProSYS Secure communication with full SSL stack using AES256 bit encryption; cipher key changed frequently IP/GSM Receiver software available for compatibility with Monitoring Station applications Compatible with 10BaseT and 100BaseT networks Supports simultaneous multiple channel TCP/IP communication– Upload/download communication and MS event reporting can be performed simultaneously Selected events may be reported to two different email addresses. ACMTM provides various IP connectivity methods to suit your monitoring and control requirements: Integrate the ACM™ with third-party Security or Building Management applications Customize the ACM™ with additional capabilities (software and hardware) to meet your project requirements HMI support by using industry standard Modbus protocol Use RISCO Group’s Upload/Download software Utilize ACM™ Email support to receive event messages the optional Web server embedded in the ACM™ Use RISCO Group’s IP/GSM Receiver Software Use Security Manager can receive security events, while installer receives technical indications only Optional embedded web server with application links into the ProSYS control panel Supports dynamic network addressing (DHCP) Module firmware is upgradeable remotely Open architecture enables easy integration and customization according to project requirements Optional interfaces include: Fast Modem 56Kbps Two RS232C interfaces USB interface Additional RS485 interface PCMCIA interface Mounted on the ProSYS main board or in an accessory box IP/GSM Receiver Software Technical Specifications Input voltage Current consumption ACM card dimensions Operating temperature Storage temperature 8-16 VDC 300mA at 13 VDC 180 x 85 mm (length x width) 0ºC to 55ºC 0ºC to 85ºC Ordering Information Part Numbers Description RP128AB0100A RP128AA0100A ACM Basic (RS485 and Ethernet interfaces) ACM Basic + Modem interface RP128IP0000A IP/GSM Receiver Software CD and License Due to ongoing improvements specifications are subject to change without prior notice. © 05/2007 RISCO Group UNITED KINGDOM Tel: +44-161-655-5500 Fax: +44-161-655-5501 E-mail: [email protected] ITALY Tel: +39-02-66590054 Fax: +39-02-66590055 E-mail: [email protected] SPAIN Tel: +34-91-490-2133 Fax: +34-91-490-2134 E-mail: [email protected] FRANCE Tel: +33-164-73-28-50 Fax: +33-164-73-28-51 E-mail: [email protected] BELGIUM Tel: +32-2522-7622 Fax: +32-2524-4929 E-mail: [email protected] SWITZERLAND Tel: +41-27-452-2444 Fax: +41-27-452-2445 E-mail: [email protected] U.S.A. Toll Free: 1-800-344-2025 Tel: +305-592-3820 Fax: +305-592-3825 E-mail: [email protected] BRAZIL Tel: +55-11-3661-8767 Fax:+55-11-3661-7783 E-mail: [email protected] CHINA Tel: +86-21-52390066 Fax: +86-21-62400560 E-mail: [email protected] ISRAEL Tel: +972-3-963-7777 Fax: +972-3-961-6584 E-mail: [email protected] 7LF720QB RISCO Group’s advanced IP/GSM Receiver Software is a Windowsbased software package that works in conjunction with the ACM module. Running on a network PC in the Central Control Room, this sophisticated software receives the encrypted protocol from the ACM and translates the events into standard protocols used by Monitoring Station applications (e.g., Contact ID).
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project