Hypercom IEN 100 Network Card User Manual

Hypercom IEN 100 Network Card User Manual
IEN 100
A reliable, flexible and powerful ATM solution.
Product Data
The IEN 100 chassis is a communications device used to connect an
automated teller machine (ATM) to a host. The IEN 100 connects to an ATM
through the RS-232 serial port. A normal 2-wire telephone cable connects to
the RJ-11 LINE port of the IEN 100 chassis for ATM transactions. The RJ-11
port also provides access to the internal V.22bis modem.
Key Features
• Connects ATMs, Point-of-Service (POS) devices, PCs or store
controllers to existing hosts utilizing standard dial access services
• Converts existing leased-line ATMs into dial-up access ATMs
• Operates many ATMs which support SDLC or BSC in a dial
• Spoofs normal ATM communication to provide cheaper bandwidth than
leased lines
• Remains online to pass multiple transactions until timeout drops
Whether you're looking for a reliable payment terminal, innovative,
value-add technology, or a complete electronic transaction management
system, Hypercom can deliver. Our product portfolio ranges from basic
credit authorization to full transaction transport and more. Hypercom is
more than a one-stop shop for payment terminals, it's a provider of
complete, end-to-end transaction solutions that expand the possibilities
at the POS in ways that translate to greater profits.
IEN 100
A reliable, flexible and powerful ATM solution.
Technical Specifications:
Reliability Built In
• Part of the long-lasting, world renown family of IEN products
• Built on a framework that relies on standards and industry standards.
• High-speed serial: RJ-11 or V.22bis (1.2/2.4kbps)
• Low-speed serial: RS-232 (up to 19.2kbps)
• AC: 110-220 V, .8 A, 50/60 Hz
• 6.0 in x 6.7 in x 1.6 in/15.2 cm x 17.1 cm x 4.0 cm
Flexible - - Development and Growth
• Allows users to start small and expand their framework as new requirements develop
• Provides freedom to implement more cost-effective services, to continuously integrate
newer applications and to tailor a complete network solution that extends existing
• 1.5 lbs/0.7 kg
• Temperature: 0-40°C/32-104°F
• Humidity: 25 to 95%, non-condensing
• Heat dissipation: 34 BTU/hr
• FCC Part 15, UL (USA and Canada), CB, ICES
and CE
© 2006 Hypercom Corporation, all rights reserved. Hypercom is a
registered trademark of Hypercom Corporation. The Hypercom logo is
a trademark of Hypercom Corporation. All other products or services
mentioned in this document are trademarks, service marks, registered
trademarks or registered service marks of their respective owners.
Product Specifications subject to change without notice.
940272-018, Rev D July 2006
Powerful Network Management
• HypercomView, Hypercom’s network management system, delivers all of the tools
needed to keep POS network running smoothly
• Client/server architecture provides comprehensive activity and performance statistics,
alerts and alarms, and remote downloads and upgrades
• Sets new standards in GUI-based management for detail, simplicity and speed.
World Headquarters:
Hypercom Corporation | 2851 W. Kathleen Road, Phoenix, Arizona 85053, USA
Tel: +1.602.504.5000 | Fax: +1.602.504.4655 | Web: www.hypercom.com
Global Locations:
North America | Latin America | Asia/Pacific Rim | Europe | Middle East | Africa | Australia
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF