IBM 365CS/CSD (2625) Clock Radio User Manual

IBM 365CS/CSD (2625) Clock Radio User Manual
InfoPrint Hi-Lite Color 4005-HC2
IBM
InfoPrint Hi-Lite Color
4005 HC1 to 4005 HC2
Upgrade
-
InfoPrint Hi-Lite Color 4005-HC2
IBM
InfoPrint Hi-Lite Color
4005 HC1 to 4005 HC2
Upgrade
-
Note
First Edition (June 1998)
The following paragraph does not apply to any other country where such provisions are inconsistent with local law.
INTERNATIONAL BUSINESS MACHINES CORPORATION PROVIDES THIS PUBLICATION “AS IS” WITHOUT
WARRANTY OF ANY KIND, EITHER EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Some states do not allow
disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.
Requests for IBM publications should be made to your IBM representative, or to your IBM branch office serving your
locality. If you request publications from the address given below, your order will be delayed because publications are
not stocked there.
A Reader’ Comments form is provided at the back of this publication. If the form has been removed, you can send
comments by fax to 1-800-524-1519, by E-mail to [email protected], or by mail to:
IBM Printing Systems Company
Department H7FE, Building 003G
Information Development
P.O. Box 1900
Boulder CO USA 80301-9191
IBM may use or distribute whatever information you supply in any way it believes appropriate without incurring any
obligation to you.
Visit our home page at: http://www.printers.ibm.com
© Copyright International Business Machines Corporation 1997. All rights reserved.
Note to U.S. Government Users — Documentation related to restricted rights — Use, duplication or disclosure is
subject to restrictions set forth in GSA ADP Schedule Contract with IBM Corp.
Related Publications
The following is a listing of related publications for Advanced Function Presentation.
v PPFA User’s Guide, S544–5284
v AFP Toolbox for Multiple Operating Systems User’s Guide, S544–5292
v An extensive listing of available publications is included in Advanced Function
Presentation: Printer Information, G544-3290 and Guide to Advanced Function
Presentation, G544-3876.
v DCF User’s Guide , S544-3191
v OGL User’s Guide , S544-3702
v AFP Programming Guide and Line Data Reference , S544-3884
v Mixed Object Document Content Architecture Reference (MO:DCA) , SC31-6802
v Intelligent Printer Data Stream Reference , S544-3417
v InfoPrint Hi-Lite Color Introduction and Planning Guide , G544-5420
Contact your IBM marketing representative or your IBM printing system specialist
for information concerning other publications or associated licensed programs.
© Copyright IBM Corp. 1997
iii
iv
Upgrade Hi-Lite Color to HC2
HC1 to HC2 Upgrade
The information contained in this document is to be used by customers who are
planning to upgrade their InfoPrint Hi-Lite Color 4005 HC1 to a InfoPrint Hi-Lite
Color 4005 HC2.
The HC1 has eight 1.27 mm (0.4 inch) printheads with 96 inkjets each and the HC2
has eight 2.72 cm (1.06 inch) printheads with 256 inkjets each . The upgrade
affects the following:
1. Applications
2. Supplies and Features
3. Installation
Applications and Machine Setup
The HC1 applications are compatible with the HC2.
The Setups for the HC1 must be saved (Configure HCPP) before the installation
starts. When the HC2 has been tested, the Setups are read (Configure HCPP).
The InfoPrint 4000 must be at level 8.523 or higher.
Supplies and Features
The HC1 supplies and features are not compatible with the HC2. These include ink,
ink reservoir, and printheads. The upgrade installs one HC2 ink reservoir and eight
HC2 printheads. Additional reservoirs and printheads are not included in the base
upgrade. If additional ink reservoirs and/or printheads are required, these need to
be ordered separately.
Note: HC1 ink is not compatible with the HC2 ink, because HC1 ink causes severe
damage to the HC2. Do not use HC1 ink in the HC2 ink reservoir.
New ink must be available at the account before the planned installation date.
Custom colors must go through the design process for the new ink.
Installation
The installation of the upgrade takes approximately 1 week. The installation activity
requires working space. This means the following:
1. There are two methods for the upgrade
v Removing the HC1 from its current location so that the InfoPrint 4000 can still
be used during the upgrade installation.
– Time to remove the HC1 from its current position and move the
post-processing equipment will affect the InfoPrint 4000 operation and
must be scheduled.
– Time to move the post-processing equipment, install the HC2, and test will
affect InfoPrint 4000 operation and must be scheduled.
© Copyright IBM Corp. 1997
1
v Leaving the HC1 in its current location during the upgrade installation. This
would require the InfoPrint 4000 to use its own stacker during the entire
upgrade.
2. A working area to accommodate the installation 3302 mm x 3633 mm (130 inch
x 143 inch) must be provided.
3. Additional area, large enough to accommodate unpacking and storing upgrade
parts (approximately 3048 mm x 3048 mm (120 inch x 120 inch) must be
provided.
2
Upgrade Hi-Lite Color to HC2
IBMR
Printed in the United States of America
on recycled paper containing 10%
recovered post-consumer fiber.
-
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement