WV-ASM200 WV-ASE201 i-PRO management software for multi-recorder multi-site system i-PRO Management Software

WV-ASM200 WV-ASE201 i-PRO management software for multi-recorder multi-site system i-PRO Management Software
i-PRO Management Software
Extension Software
WV-ASM200 with WV-ASE201
(System Controller WV-CU950 and monitor displays are optional.)
i-PRO management software for multi-recorder multi-site system
Key Features: WV-ASM200/WV-ASE201
• Supports 16:9 video stream and 16:9 HD monitor. Displays 16:9
and 4:3 videos from IP cameras on the same screen.
• H.264 recording data in the SD/SDHC momory card can be downloaded.
• Convert file format from n3r (proprietary format) to MP4.
• Online management system enables easy use without dongle.
• Up to 100 recorders, 64 encoders and 256 directly connected cameras can be
registered. Up to 6,400 cameras registered in the recorders and 256 cameras
registered in the encoders are automatically registered in the WV-ASM200 (the
number of the cameras depends on the recorder and encoder).
• Live images can be received directly from the camera/encoder or
via the recorder enabling flexible network design.
• Multi-Monitor option enables simultaneous use of Operation Display (1 / 4 / 9 / 16 split),
Live Display (1 / 4 / 9 / 16 split) and Map Display each on a dedicated monitor. Single or
two monitor operation is also available. A total of 20 screens can be displayed with the
simultaneous use of the Operation Display and the Live Display at a time.*1
• Up to 16x 30 ips/camera images can be displayed in H.264 1.5 Mbps mode
(VGA: Normal quality mode) or MPEG-4 2 Mbps mode (VGA: Normal quality
mode, QVGA: High quality mode, depending on the camera and camera setup).
• Up to 400 camera groups: Cameras and multiscreen mode for the Operation
Display can be programmed and called up by manual or sequence operation.
• Image resolution dynamically changes depending on the screen
mode: VGA for Quad screen, QVGA for 16 split screen, enabling
optimum network usage (depending on the camera model).
• Panasonic camera control: Pan/Tilt, Zoom, Focus, Brightness,
Preset position call and program (up to 256), Auto mode, AUX 1 ~ 3,
Click Centering, Wheel Zoom, Specified area zoom by mouse
dragging (depending on the camera model)
• A camera, a group or a sequence can be called up on the Operation Display by
their ID with the optional system controller WV-CU950.*1 The camera displayed
in the active window can be controlled by the system controller. Recorder
playback operation can also be made by the system controller with Jog/Shuttle.
• Alarm notification: A pop-up alarm message is displayed.
• Individual alarm reset is possible.
• Operation Display, Live Display, and Map Display reacts correspondingly with the alarm.
• Displays the present alarm log in red.
• When an alarm occurs, the monitor changes into the map
automatically showing where the alarm happened.
• Illustrated camera, alarm and recorder icons for intuitive operations
• Up to 64 camera icons can be freely positioned on a map with
alarm status indicated by the color of the icons.*1
• Recorded images of up to 64 cameras (in case with WJ-ND400) can be downloaded by
one operation. Downloaded images can be viewed by the viewer software (provided).
• Sophisticated user management: User authentication with time limited
password, 5 user levels, User-Camera View/Control partitioning in conjunction
with recorder’s user management function, Up to 32 user registrations
• System logs can be saved in CSV format. Operation logs can automatically
be erased when specified time has passed (31 / 92 / 184 / 366 days).
• Audio from a camera can be heard and the operator voice can be
transmitted to the camera’s audio output through the network
(single channel at a time, full/half duplex depending on the camera).
• Recorded audio with the WJ-ND200 or WJ-ND400 or WJ-NV200
can be played back (single channel at a time).
• Video Analytic functions of the WJ-NT314 such as intruder detection
and object abandonment/removal detection can be displayed.
• When used with WJ-ND400 series, WJ-HD716/616, WJ-NV200,
VMD search can be operated.
*1 WV-ASE201 is necessary.
Optional Accessory
Ethernet System Controller
with 3D-Joystick & Jog/Shuttle
(WV-ASE201 is necessary.)
System Example
Analog Camera x 4
Network Camera x 28
JPEG Encoder
Network Disk Recorder
Network Camera x 16
Network Disk Recorder
with WV-ASE201
Specifications: WV-ASM200/WV-ASE201
Supported Supported Cameras
Supported Recorders
Supported Encoders
Supported Controller*1
Supported Image Format
Supported Image
Max. Recorder Registrations
Max. Encoder Registrations
Max. Camera Registrations
Camera Control
(depending on the
Recorder Control
(depending on the
Event Search
VMD Search
Multiscreen Mode
Sequence Display
Display Performance
Camera Group Display
Number of Maps*1
Image Download
SD memory Download
Recorder/Camera Access
File Conversion
Camera Title Display
Clock Display
Alarm Source
Alarm Control
Alarm Action
Digital Zoom
Text Attachment
System Log
Recorder Log Download
User Management
Security Method
System Setup
GUI Language
Supported OS*2
Required PC
Playback Control
Additional Functions
Direct: Panasonic i-PRO series Network cameras except WV-NM100
Via Recorder: Panasonic i-PRO series Network cameras,
BB series (specific models) and Axis® (specific models)
WJ-ND400 series, WJ-ND300 series, WJ-ND200 series, WJ-HD716/616,
WJ-HD300A series, WJ-NV200
WJ-GXE500, WJ-NT304, WJ-NT314
H.264, MPEG-4 (i-PRO series except WV-NM100), M-JPEG
2,048 x 1,536, 1,920 x 1,080, 1,280 x 960, 1,280 x 720, 960 x 720, 800 x 600,
640 x 480, 640 x 360, 320 x 240, 320 x 160 (depending on the source equipment)
100, Cameras registered in the recorders are automatically registered in WV-ASM200
64, Cameras registered in the encoders are automatically registered in WV-ASM200
Camera direct: 256, Via Recorder: 6,400 (in case with WJ-ND400),
3,200 (in case with WJ-ND300), 1,600 (in case with WJ-ND200/WJ-NV200),
Via Encoder: 256 (in case with WJ-GXE500, WJ-NT314/304)
Pan/Tilt, Zoom, Focus, Brightness, Preset position call and program (up to 256),
Click centering, Wheel zoom, Drag and zoom
REC, PLAY, Rev PLAY, Pause, Stop, FF (up to 96x), REW (up to 96x),
Prev Record, Next Record, Prev Image, Next Image, Skip (up to 60 min.),
Rev Skip, (up to 60 min.) Text
Target: Recorder (Camera) / Group / Map*1, Search criteria: Time date,
Event type, Text
In case with WJ-ND400 series, WJ-HD716/616, WJ-NV200
Spot / Quad (A-D) / 9 split / 16 split
10 programs, 64 steps/pattern, Spot / Quad / 9 split / 16 split
Dwell time: 3s / 5s / 10s / 15s / 20s / 25s / 30s / 35s / 40s / 45s / 50s / 55s / 1min
30 ips x 16 screens at H.264 1.5 Mbps, 30 ips x 16 screens at MPEG-4 2 Mbps
Up to 3 monitors (Operation / Live / Map), Up to 20 cameras can be
displayed (Operation-4, Live-16)
Up to 400 groups with 16 alphanumeric titles
Up to 100 maps (JPEG or Bit map), Link: 64 cameras and 20 maps / map
Recorded images of up to 64 cameras (in case with WJ-ND400) can be downloaded.
Manual download only. Viewer software can be extracted from the main software.
Indicates the function featured in some Panasonic's cameras that transfers
H.264 video files (mp4 files) saved on the SD memory card equipped with the
camera to a PC using the FTP function.
The access to the Recorder and Camera Web pages when logged in as admin
Convert a n3r file to the standard format (mp4)
On the GUI, Up to 16 characters
On the GUI. Time: 12H/24H, Date: 5 formats
(When the image comes from the recorder)
Panasonic alarm protocol
Reset, Auto reset (OFF / 10s / 20s / 30s / 1min / 5min)
Up to 16 alarm images can be displayed on the live monitor. Corresponding
camera icon on the map lights up. Alarm message on the GUI and buzzer.
Up to 4 times
Free comment can be attached for each record and reviewed at later time.
Up to 200 characters
Operation (100,000), System (1,000), Network error (1,000),
Recorder error (1,000), Alarm (30,000)
Operator access, Network error, Error, Event
Registration: Up to 32 users + Administrator, ID: 4-14 digit, PW: 4-8 digit,
User level: 5 levels (Programmable), PW time limit: OFF / 31 / 92 / 184 / 366 days,
Auto login: ON / OFF, Login user: Up to 16 users
User authentication (ID and Password), Host authentication (IP address),
Alteration detection, Activation Key Card
Setup page in English, French, Italian, Spanish, German, Russian, Chinese, Japanese
English, French, Italian, Spanish, German, Russian, Chinese, Japanese
Microsoft® Windows Vista® Business SP2 32bit/64bit,
Microsoft® Windows® 7 Professional SP1 32bit/64bit
The language of the OS must be same as selected GUI language.
CPU: Intel® Core™ i5-2400, 2500,
Intel® Core™ i7-860 or faster
RAM: 3 GB or more,
VRAM: 512 MB or more (256 MB min.), Microsoft® DirectX® 9.0c or later
Web Broswer: Internet Explorer® 7.0 or later (depends on a connected device)
HTTP proxy supported (IP address and port No.)
Play, Rev Play, Pause, FF, REW, Prev Record, Next Record, Prev Image, Next Image
Alteration detection, Save as JPEG, Two times zoom, Print
Operation Window
Menu Bar
Tool Bar
Function Panel
Status Bar
Display Area
Operation Panel
Software Comparison Chart
Main Functions / Description
Supported Camera Direct
Via Recorder
Recorder NVR
Camera Direct
Via Recorder
Via Encoder
AVMD Display (Frame and Tracking Line)
Multiple Monitors Supported
Map Function
Event Search (T&D, Event type etc.)
VMD Search
Image Download
Management Software Management Software - Basic
Live / Playback / Control
i-PRO series*3
i-PRO series*3, Axis*4, BB series*4
WJ-ND400 series, WJ-ND300 series,
WJ-ND200 series, WJ-NV200 series
WJ-HD716/616, WJ-HD300A series
WJ-GXE500, WJ-NT314, WJ-NT304
6,400 (with WJ-ND400 series)
3,200 (with WJ-ND300 series)
1,600 (with WJ-ND200 series/WJ-NV200 series)
256 (with WJ-GXE500, WJ-NT314/304)
Yes (Up to 3 monitors: No
Operation / Live / Map)
Yes (Live: 2-way, Playback: 1-way)
(with WJ-ND400 series, WJ-HD716/616, WJ-NV200)
*3 Except WV-NM100
*4 Specific Models only. Also, JPEG only is supported and camera control is not supported.
*1 WV-ASE201 is necessary.
*2 Microsoft® Windows® XP not supported
Trademarks and registered trademarks
– Microsoft, and Windows are registered trademarks of Microsoft Corporation in the U.S. and other countries.
– Axis is a registered trademark of Axis Communications AB.
– Intel and Pentium are registered trademarks of Intel Corporation.
– "Super Dynamic", "SDII", "SDIII", "SD5", "SD5Link", "i-PRO" and "i-PRO SmartHD" logos are trademarks or registered trademarks of
Panasonic Corporation.
– Panasonic recommends a dedicated PC to prevent installation errors and to keep best performance.
– Safety Precaution: carefully read the operating instructions and installation manual before using this product.
– Panasonic can not be responsible for network performance and/or other manufacturer products that reside on the network.
– When remote monitoring, please pay attention to the network design. For details, please contact your local Panasonic sales representatives.
• All TV pictures are simulated.
• Masses and dimensions are approximate.
• Specifications are subject to change without notice.
• These products may be subject to export control regulations.
• All product pictures are NTSC models.
Printed in Japan (2A-081L)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF