advertisement
08-1154 NS-LTDVD19-09CA - ENG.fm Page 1 Monday, April 28, 2008 10:03 AM
User Guide
19” LCD TV/DVD Combo
NS-LTDVD19-09CA
08-1154 NS-LTDVD19-09CA - ENG.fm Page 2 Monday, April 28, 2008 10:03 AM
08-1154 NS-LTDVD19-09CA - ENG.fm Page 3 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Contents
Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Safety information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Front . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Back . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Installing remote control batteries . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Using the remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Setting up your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting an antenna, cable TV, or satellite TV. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a standard video device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Connecting a component video device. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Connecting a computer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Using the basic controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Turning the TV on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Adjusting the volume . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the video mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Selecting the TV signal source . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing channels. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Using the on-screen menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Memorizing channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Changing the tuning settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Manually editing channels . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Labeling a channel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Enabling digital noise reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting picture settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Adjusting audio settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting equalizer settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Adjusting other settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Setting the parental controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Adjusting the settings (VGA mode only). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
PC input signal chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Changing your computer's video resolution . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Using the DVD player. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Playing a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Playing an audio CD. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using DVD repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using CD repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using a DVD title menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22
Using a DVD menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Searching for a DVD title or chapter . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Searching for a specified time on a DVD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Searching for a specific track on a CD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Searching for a specified time on a CD track . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Changing the DVD audio language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Turning DVD subtitles on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Selecting the subtitle language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Changing the DVD display mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Turning the screen saver on and off . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Using DVD last memory . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting up DVD speaker output . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Setting up DVD Dolby Digital . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
Using the DVD equalizer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting up DVD 3D sound. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Setting DVD video options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Setting a DVD parental password. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
Changing DVD preferences . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Maintaining. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Attaching the pedestal stand . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
One-Year Limited Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Introduction
Congratulations on your purchase of a high-quality Insignia product. Your NS-LTDVD19-09CA represents the state of the art in television and DVD player design, and is designed for reliable and trouble-free performance.
3
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 4 Monday, April 28, 2008 10:03 AM f
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
CHILD SAFETY
It makes a difference how and where you use your flat panel display
As you enjoy your new product, keep these safety tips in mind
The issue
The home theater entertainment experience is a growing trend, and larger TVs are popular purchases. However, TVs are not always supported on the proper stands or installed according to the manufacturer’s recommendations. We and the consumer electronics industry are committed to making home entertainment enjoyable and safe.
TVs that are inappropriately placed on dressers, bookcases, shelves, desks, speakers, chests, or carts may fall over and cause injury.
Tune into safety
•
•
•
•
•
•
One size of TV stand does not fit all. Use only a TV stand rated for the weight of your TV.
Carefully read and understand all enclosed instructions for proper use of this product.
Don’t let children climb on or play with entertainment system furniture and TVs.
Don’t place TVs on furniture that can easily be used as steps, such as a chest of drawers.
Remember that children can become excited while watching a program, especially on a “larger-than-life”
TV. Make sure that you place or install the TV where it cannot be pushed, pulled over, or knocked down.
Make sure that you route all cords and cables so that they cannot be pulled or grabbed by curious children.
Wall mounting
•
•
•
•
•
If you decide to wall mount your TV, remember:
One size of wall mount does not fit all. Use only a wall mount rated for the weight of your TV and that has been recommended by this TV manufacturer, listed in this manual, or otherwise listed by an independent laboratory (such as UL, CSA, or
ETL) as suitable for your TV.
Follow all instructions supplied by the TV and wall mount manufacturers.
If you have any doubts about your ability to safely wall mount your TV, get help from a professional installer.
Make sure that the wall where you are mounting the TV is appropriate. Some wall mounts are not designed to be mounted to walls backed with steel studs or cinder blocks.
If you are unsure, ask a professional installer.
TVs can be heavy. At least two people are required for safe wall mount installation.
4
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 5 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Safety information
Warning
To reduce the risk of electric shock, do not remove the cover or back. There are no user-serviceable parts inside. Refer servicing to qualified service personnel.
To reduce the risk of fire or electric shock, do not expose your
TV to rain or moisture.
Caution
To prevent electric shock, match the wide blade on the power cord plug to the wide slot on an electric outlet. If the plug does not fit, consult a licensed electrician to replace the obsolete outlet. Do not modify the power cord plug, or you will defeat this safety feature.
This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your TV. This label is located on the back of your TV.
This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your TV.
Laser safety
Your TV employs a laser. Only a qualified service person should remove the cover or attempt to service your TV because of possible eye injury.
Warnings
• Use of controls or adjustments or performance of procedures other than those specified herein may result in hazardous radiation exposure.
• Visible and invisible laser radiation is present when open and interlock defeated.
• Do not stare into beam.
• The laser is located inside, near the deck mechanism.
• The apparatus shall be connected to a mains socket outlet with a protective earthing connection.
• To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.
• Always place the TV on the floor or a sturdy, level, stable surface that will support the weight of the unit.
• Installing the TV requires special skill that should only be performed by qualified service personnel.
• Customers should not attempt to do the work themselves.
Insignia bears no responsibility for improper mounting or mounting that results in accident or injury.
Caution
The AC power plug is used as the disconnect device, so the
AC power plug shall always remain readily operable.
Read instructions
Read all of the safety and operating instructions before you use your TV.
Retain instructions
Retain safety and operating instructions for future reference.
Follow warnings and instructions
Follow all warnings on your TV and in the operating instructions. Follow all operating and use instructions.
Water and moisture
Do not use your TV near water. For example, do not use it near a bath tub, wash bowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool.
Cleaning
Unplug your TV before cleaning. Do not use liquid or aerosol cleaners. Use only a damp cloth to clean the exterior of your TV.
Ventilation
Slots and openings in the cabinet and the back or bottom are provided for ventilation, reliable operation, and protection from overheating.
These openings must not be blocked or covered.
Do not block the openings by placing your TV on a bed, sofa, rug, or other similar surface. Do not place your TV near or over a radiator or heat register. Do not place your TV in a built-in installation, such as a bookcase or rack, unless you provide correct ventilation or follow the manufacturer’s instructions.
Heat
Make sure that your TV is located away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat.
Grounding or polarization
Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the other. A grounding type plug has two blades and a grounding prong. The wide blade or grounding prong are provided for your safety. If the plug does not fit, contact an electrician to replace the obsolete outlet.
Power cord protection
Route power cords so that they are not likely to be walked on or pinched by items placed on or against them. Pay particular attention to cords at plugs, convenience receptacles, and the point where they exit from your TV.
Attachments
Stand
Use only attachments recommended by
Insignia.
Do not place your TV on an unstable cart, stand, tripod, bracket, or table. Your TV may fall, causing serious personal injury and serious damage to your TV.
Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with your TV. If you mount your TV to the wall, follow the manufacturer’s instructions and use a mounting accessory recommended by the manufacturer. Your TV and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause your TV and cart combination to overturn.
5
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 6 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Lightning
For added protection for your TV’s receiver during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the power outlet and disconnect the antenna or cable system. This helps prevent damage to your TV from lightning and power line surges.
Servicing
Do not attempt to service your TV yourself because opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.
Replacement parts
When replacement parts are required, make sure that the service technician uses replacement parts specified by the manufacturer that have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, personal injury, or other hazards.
Overloading
Do not overload power outlets and extension cords because this can result in a risk of fire or electric shock.
Object and liquid entry
Never push objects of any kind into your TV through openings because objects may touch dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid of any kind on your TV.
Damage requiring service
Unplug this TV from the power outlet and refer servicing to qualified service personnel under the following conditions:
• When the power supply cord or plug is damaged or frayed.
• If liquid has been spilled or objects have fallen into your TV.
• If your TV has been exposed to rain or water.
• If your TV does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions because incorrect adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore your TV to its normal operation.
• If your TV has been dropped or damaged in any way.
• When your TV exhibits a distinct change in performance.
Safety check
After completing any service or repair to this TV, ask the service technician to perform routine safety checks to determine that your TV is in correct operating condition.
Power source
Operate your TV only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your TV dealer or local power company.
Screen protection
Your TV’s screen is made of glass. Do not drop your TV or hit the glass screen. If the screen breaks, be careful of broken glass.
Non-active pixels
The LCD panel contains almost 3 million thin film transistors, which provide exceptionally sharp video quality. Occasionally, a few nonactive pixels may appear on the screen as a fixed blue, green, or red point. These non-active pixels do not adversely affect the performance of your TV, and are not considered defects.
Outdoor antenna grounding
If an outside antenna or cable system is connected to your TV, make sure that the antenna or cable system is grounded to provide some protection against voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA No. 70, provides information with respect to correct grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of the antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
1
5
4
3
2
7
6
6
7
4
5
1
2
3
Electric service equipment
Power service grounding electrode system
Ground clamps
Grounding conductors
Antenna discharge unit
Grounding clamp
Antenna lead-in wire
Note to CATV system installer
This reminder is provided to call the CATV system installer’s attention to Article 820-40 of the NEC that provides guidelines for correct grounding and in particular, specifies that the cable ground must be connected to the grounding system of the building as close to the point of cable entry as practical.
6
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 7 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
End of life directives
Your new TV contains materials which can be recycled and reused. At the end of your TV’s life, specialized companies can dismantle the discarded TV to concentrate the reusable materials and to minimize the amount of materials to be disposed of. Dispose of your old
TV according to local regulations.
Features
Accessories
Make sure that the following accessories are provided in the packaging:
• Power cord
• Remote control and batteries
• User manual
Front
#
8
9
10
11
12
13
14
Back
Item Description
Power/Standby indicator
Lights when your TV is plugged into a power outlet. When your TV is on, the indicator is blue. When your TV is in standby mode, the indicator is red.
IR sensor Receives signals from the remote control.
Do not block.
MENU button Press to open the TV menu.
INPUT button Press to select the AV signal input. You can select TV, AV1, AV2, S-Video, Component,
DVD, HDMI, or VGA.
Volume+/- buttons
Press to adjust the volume.
CH+/- buttons Press to change the channel.
POWER button Press to turn your TV combo on or off or press to leave standby mode.
8
9
1
~ 100-240V 50/60Hz
A C I N P U T
10
12 cm
Disc On ly
1
2
3
4
5
6
7
DISC IN
OPEN/
CLOSE
PREV
NEXT
STOP
PLAY/
PAUSE
MENU
INPUT
VOL
VOL
CH
CH
POWER
10
11
12
13
14
3
4
5
6
7
#
1
2
Item Description
Disc slot Insert a DVD or CD to change to DVD mode and play the disc.
PREV button Press to skip to the previous chapter or track.
NEXT button Press to skip to the next chapter or track.
STOP button Press to stop disc playback.
PLAY/PAUSE button
Disc In indicator
OPEN/CLOSE button
Press to change to DVD mode and begin and pause the DVD or CD playback.
When Iit, indicates a DVD or CD is loaded into the disc slot.
Press to eject the disc in the disc slot.
2 3 4 5 6 7 8 9
# Description
1
2
3
4
5
6
AC input
HDMI INPUT
INPUT (AV3-Y, Cr/Pr, Cb/Pb, AUDIO L, and
AUDIO R)
AV2 INPUT (VIDEO and L/R AUDIO INPUT)
VGA PC INPUT
AV1 INPUT (S-VIDEO, VIDEO, and L/R
AUDIO INPUT)
7
8
PC AUDIO INPUT
UPGRADE jack (For service only)
9 RF INPUT (coaxial antenna)
10 PHONES (headphone jack)
7
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 8 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Remote
E
8
9
10
5
6
7
#
1
2
3
4
11
12
Button
(power)
TV
DVD
Number buttons
MUTE
VOL +/-
MTS/SAP
CCD
Description
Press to turn your TV combo on or off or press to leave standby mode.
Press to change to TV mode.
Press to change to DVD mode.
Press to enter channel numbers, DVD chapters, or CD track numbers.
Press to mute the sound. Press again to restore the sound.
Press to adjust the volume.
Press to select Stereo, Mono, or SAP mode.
Press to select the closed caption mode while in TV mode.
Press to open the on-screen TV menu.
Press to navigate the on-screen menus.
TV MENU
,
, ,
ENTER
(Fast reverse)
(Fast forward)
Press to confirm your selections.
Press to search backward on a DVD or CD.
Press to search forward on a DVD or CD.
#
13
14
20
21
22
23
24
15
16
17
18
19
25
26
27
28
29
30
31
32
33
Button
reverse)
(Skip
(Skip forward)
STOP
DVD TITLE
DVD MENU
REPEAT
AUDIO
(Open)
INPUT
ZOOM
CH /
RECALL
DISPLAY
PICTURE
AUDIO
(Play/Pause)
(slow)
SETUP
A-B
T.SEARCH
RETURN
SUBTITLE
Description
Press to skip to the previous chapter or track.
Press to skip to the next chapter or track.
Press to stop DVD or CD playback.
Press to open the DVD title menu.
Press to open the DVD menu.
Press to repeat a section of a DVD or CD.
Press to change the DVD audio language.
Press to eject the disc from the disc slot.
Press to open the source input menu.
Press to change the zoom mode.
Press to change the channel.
Press to return to the previous channel.
Press to display information about the input source.
Press to change the picture mode.
Press to change the sound mode.
Press to play a DVD or CD. Press again to pause a DVD or CD.
Press to slow forward or slow reverse a
DVD.
Press to open the DVD setup menu.
Press to create a playback loop.
Press to locate a point at which to start playback.
Press to return to the previous menu.
Press to change the DVD subtitle language.
Not available on some DVDs.
Installing remote control batteries
To install the remote control batteries:
1 Remove the battery cover.
8
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 9 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
2 Insert two AAA batteries into the battery compartment. Make sure that you match the
+ and – symbols on the batteries with the + and – symbols in the battery compartment.
Using the remote control
To use the remote control:
• Point the remote control directly at your TV, within a 60° angle horizontally (30° to either side), and within 30° vertically of the remote control sensor on the front of your TV and within 26.25 feet (8 m) of your TV.
3 Replace the cover.
Notes
• Do not mix batteries of different types.
• Do not mix old and new batteries.
• Remove batteries when the charge is depleted.
• Battery chemicals can cause a rash. If the batteries leak, clean the battery compartment with a cloth. If chemicals touch your skin, wash immediately.
• If the remote control is not going to be used for an extended period of time, remove the batteries.
30 30
Caution
Do not expose the remote control to liquids, direct sunlight, or shock. Do not mix batteries of different types.
Notes
• Objects between the remote control and the remote control sensor may block the remote control signal.
• The range of the remote control may be diminished if direct sunlight or other strong light is shining on the remote control sensor. In this case, change the angle of the lighting, move your TV, or operate the remote control closer to the remote control sensor.
www.insignia-products.com
9
08-1154 NS-LTDVD19-09CA - ENG.fm Page 10 Monday, April 28, 2008 10:03 AM
Setting up your TV
Connecting an antenna, cable TV, or satellite TV
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Connecting a standard video device
Note
Your TV supports multiple video source inputs. For temporary or easy-access video connections, use the rear jacks (AV2). For more permanent connections, use the rear jacks (AV1).
1
~ 100-240V 50/60Hz
A C I N P U T
1
~ 100-240V 50/60Hz
A C I N P U T
10
RF INPUT
C PB C PR
L FOR
ONLY
L
2
3
To connect an external antenna, cable TV, or satellite TV:
1 Plug the antenna cable (2) from an antenna, cable TV, or satellite receiver (3) to the RF
INPUT jack on your TV.
2 Turn on your TV.
3 Press INPUT, then press
/
to select TV.
5
C PB C PR
L
L
RF INPUT
FOR
ONLY
6 4
2 3
7
To connect a standard video device to the
AV1 INPUT jacks:
1 Plug an RCA video cable (2) into a standard video source (7) and into the VIDEO1 jack on the back of your TV.
2 Plug the RCA audio cables (4) into the video device's audio output jack and into the lower
AUDIO L and AUDIO R jacks on the back of your TV.
3 Turn on your TV.
4 Press INPUT, then press
/
to select AV1.
To connect a standard video device to the
AV2 INPUT jacks:
1 Plug an RCA video cable (5) into a standard video source (7) and into the VIDEO2 jack on the back of your TV.
2 Plug the RCA audio cables (6) into the video device's audio output jack and into the lower
AUDIO L and AUDIO R jacks on the back of your TV.
3 Turn on your TV.
4 Press INPUT, then press
/
to select AV2.
To connect a standard S-Video device to AV1
INPUT jacks:
1 Plug an S-Video cable (3) into the S-Video out jack on an S-Video device (7) and into the
S-VIDEO jack on the back of your TV.
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 11 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
2 Plug RCA audio cables (4) into the S-Video device audio output jacks and into the AUDIO
L and AUDIO R jacks on the back of your TV.
3 Turn on your TV.
4 Press INPUT and
/
to select S-Video.
Connecting a component video device
Connecting a computer
1
~ 100-240V 50/60Hz
A C I N P U T
1
~ 100-240V 50/60Hz
A C I N P U T
2
HDMI INPUT VGA INPUT AUDIO
3 4
2
C P
B
C P
R
L
L
RF INPUT
FOR
ONLY
4
3
To connect a progressive-scan or HDTV video source to Y/Pb/Pr jacks:
1 Plug a component video cable (2) into the progressive-scan or HDTV video device (3) and into the Y/Pb/Pr jacks on the back of your TV (1).
2 Plug the RCA audio cables (4) into the audio out jacks on progressive-scan or HDTV video device and into the lower AUDIO L and
AUDIO R jacks on the back of your TV.
3 Turn on your TV.
4 Press INPUT, then press
/
to select
Component.
5
6
To connect a computer using VGA:
1 Plug a VGA cable (3) into the VGA port on the computer (5) and into the VGA INPUT port on the back of your TV.
2 Plug an audio cable (4) into the audio jack on the computer (5) and into the AUDIO VGA
INPUT port on the back of your TV.
3 Turn on your TV.
4 Press INPUT, then press
/
to select
VGA.
Caution
Your TV will automatically turn off after one minute if there is no signal in VGA mode.
To connect to a computer or other HDMI device using the HDMI jack:
1 Plug an HDMI cable (2) into the HDMI port on the HDMI device (6) and into the HDMI
INPUT port on the back of your TV.
2 Turn on your TV.
3 Press INPUT, then press
/
to select
HDMI.
Note
When the computer goes into standby mode, your
TV turns off. If your TV does not turn on when you
“wake” your computer, press POWER on your TV or remote control.
www.insignia-products.com
11
08-1154 NS-LTDVD19-09CA - ENG.fm Page 12 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Using the basic controls
Turning the TV on and off
To turn your TV on and off:
1 Press POWER on the side of your TV or on the remote control. The POWER/STANDBY indicator turns blue.
2 To turn off your TV, press POWER again. The
POWER/STANDBY indicator turns red.
Adjusting the volume
You can adjust the volume using the controls on your TV's side panel or the remote control.
To adjust the volume:
1 Press VOL+ or VOL- to increase or decrease the volume.
2 Press MUTE to mute the sound, then press again to restore the sound.
Changing the video mode
Your TV supports multiple video modes.
To select the video mode:
• Press INPUT one or more times to select the video mode, then press ENTER. You can select:
•
TV
• AV1
• AV2
• S-Video
• Component
• DVD
•
HDMI
•
VGA
Using your TV
Selecting the TV signal source
To select the TV signal source:
1 Press TV MENU, then press
/
to highlight the Tuning icon. The Tuning menu opens.
12
Changing channels
To change channels:
• Press the CH+ or CH- on the side of your TV or the CH or CH on the remote control.
To enter a channel number directly:
• Press the number buttons on the remote control.
To go to the previous channel:
• Press RECALL.
Using the on-screen menus
Use your remote control to navigate in the on-screen menus.
To use the on-screen menus:
1 Press INPUT on the remote control to select the video source.
2 Press TV MENU on the remote control. The on-screen menu appears.
3 Press
/
to highlight the Picture, Audio,
Tuning, or Function icon, then press
/
or ENTER to enter the menu.
4 Press
/
to highlight a setting, then press
/
to change the setting.
5 Press TV MENU to close the menu.
Memorizing channels
To select channels with the CH buttons, your TV first needs to memorize the channels. When your TV memorizes channels, it scans for channels with signals, then stores the channel information into memory.
To automatically memorize channels:
1 Press TV MENU on the remote control, then press
/
to highlight the Tuning icon.
The Tuning menu opens.
T u n i n g
TV Source
Auto Scan
Skip
DNR
Channel Label
CATV
Off
T u n i n g
TV Source
Auto Scan
Skip
DNR
Channel Label
CATV
Off
Select Adjust Exit
2 Press
/
or ENTER to enter the
Tuning menu.
3 Press
/
to select Auto Scan, then press
/
or ENTER to start the auto scan. Your
TV combo scans for and memorizes all channels available in your area.
Select Adjust Exit
2 Press
/
or ENTER to enter the
Tuning menu.
3 Press
/
to select TV Source, then press
/
to select Air or CATV.
• Air-VHF/UHF channels.
• CATV-Cable TV channels.
4 Press TV MENU one or more times to close the menu.
Auto Scan
Press ENTER key to Stop www.insignia-products.com
5 1
08-1154 NS-LTDVD19-09CA - ENG.fm Page 13 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
4 To stop the auto search, press ENTER.
When auto search is finished, the channel changes to the first channel in the memorized channel list.
Changing the tuning settings
To change the tuning settings:
1 Press TV MENU on the remote control, then press
/
to highlight the Tuning icon.
The Tuning menu opens.
Manually editing channels
To skip a channel:
1 Tune your TV to a channel you want to skip using the number buttons.
2 Press TV MENU on the remote control, then press
/
to highlight the Tuning icon.
The Tuning menu opens.
T u n i n g
TV Source
Auto Scan
Skip
DNR
Channel Label
T u n i n g
CATV
Off
TV Source
Auto Scan
Skip
DNR
Channel Label
CATV
Off
Select Adjust Exit
2 Press
/
or ENTER to enter the Tuning menu.
3 Press / to select one of the following options, then press
/
to change the setting. You can select:
• TV Source—Air or CATV.
• Auto Scan—For more information see
“Memorizing channels” on page 12.
• Skip—For more information see
“Manually editing channels” on page 13.
• DNR—For more information see
“Enabling digital noise reduction” on page
14.
• Channel Label—For more information see “Labeling a channel” on page 14.
4 Press TV MENU one or more times to close the menu.
Select Adjust Exit
3 Press
/
or ENTER to enter the Tuning menu.
4 Press / to
/
to highlight On.
5 Press TV MENU one or more times to close the menu. The channel number will be skipped when you search for channels with the CH +/- buttons.
To restore a skipped channel:
1 Tune your TV to a channel you want to restore using the number buttons.
2 Press TV MENU on the remote control, then press
/
to highlight the Tuning icon.
The
Tuning
menu opens.
T u n i n g
TV Source
Auto Scan
Skip
DNR
Channel Label
CATV
Off
Select Adjust Exit
3 Press
/
or ENTER to enter the Tuning menu.
4 Press / to
/
to highlight Off.
5 Press TV MENU one or more times to close the menu.
www.insignia-products.com
13
08-1154 NS-LTDVD19-09CA - ENG.fm Page 14 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Labeling a channel
To label a channel:
1 Tune your TV to a channel you want using the number buttons.
2 Press TV MENU on the remote control, then press
/
to highlight the Tuning icon.
The Tuning menu opens.
Adjusting picture settings
To adjust picture settings:
1 Press TV MENU on the remote control, then press
/
to highlight the Picture icon.
The Picture menu opens.
VGA Mode
TV Source
Auto Scan
Skip
DNR
Channel Label
T u n i n g
CATV
Off
Select Adjust Exit
3 Press
/
or ENTER to enter the Tuning menu.
4 Press / to select Channel Label, then press
/
or ENTER.
5 Press
/
to move the cursor, then press
/
one or more times to select each character for the channel label.
6 Press ENTER to confirm, then press TV
MENU one or more times to close the menu.
Enabling digital noise reduction
To reduce noise on a channel:
1 Tune your TV to a channel you want using the number buttons.
2 Press TV MENU on the remote control, then press
/
to highlight the Tuning icon.
The Tuning menu opens.
TV Source
Auto Scan
Skip
DNR
Channel Label
T u n i n g
CATV
Off
Select Adjust Exit
3 Press
/
or ENTER to enter the Tuning menu.
4 Press / to
/
to select On or Off.
• On—Noise reduction function is activated.
• Off—Noise reduction function is deactivated.
5 Press TV MENU one or more times to close the menu.
P i c t u r e
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Mode
Select Adjust
TV Mode
Standard
50
50
50
50
12
Cool
Exit
P i c t u r e
Picture Mode
Brightness
Contrast
Color
Tint
Sharpness
Color Mode
Standard
50
50
50
50
12
Cool
Select Adjust Exit
2 Press / or ENTER to enter the Picture menu.
3 Press
/
to select one of the following settings, then press
/
to change the setting. You can select:
• Picture Mode-Standard, Bright, Soft, or
Personal.
• Brightness
• Contrast
• Color (not available in VGA mode)
•
Tint
(not available in VGA mode)
•
Sharpness
• Color Mode-Normal, Warm, or Cool.
4 Press TV MENU one or more times to close the menu.
14
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 15 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Adjusting audio settings
To adjust audio settings:
1 Press TV MENU on the remote control, then press
/
to highlight the Audio icon. The
Audio menu opens.
VGA Mode
Adjusting equalizer settings
To adjust equalizer settings:
1 Press TV MENU on the remote control, then press
/
to highlight the Audio icon. The
Audio menu opens.
Sound Mode
Balance
Equalizer
MTS
A u d i o
Standard
0
Mono
Sound Mode
Balance
Equalizer
MTS
A u d i o
Standard
0
Mono
Select Adjust
TV Mode
Exit
Select Adjust Exit
2 Press
/
or ENTER to enter the Audio menu.
3 Press
/
to select Equalizer, then press
/
to enter the
Equalizer
sub-menu.
Sound Mode
Balance
Equalizer
MTS
A u d i o
Standard
0
Mono
Select Adjust Exit
2 Press
/
or ENTER to enter the
Audio menu.
3 Press
/
to select one of the following settings, then press
/
to change the setting. You can select:
• Sound Mode- Standard, Music,
Cinema, or Personal.
•
Balance
• Equalizer–For more information see
“Adjusting equalizer settings” on page
15.
• MTS-Mono, Stereo, or SAP (MTS is only available in TV mode).
4 Press TV MENU one or more times to close the menu.
A u d i o
E q u a l i z e r
+10dB
0dB
-10dB
50Hz 75Hz 100Hz 300Hz 500Hz 1kHz 3kHz 5kHz 10kHz
Select Adjust Exit
4 Press
/
to select one of the equalizer settings, then press
/
to adjust the setting.
5 Press TV MENU one or more times to close the menu.
www.insignia-products.com
15
08-1154 NS-LTDVD19-09CA - ENG.fm Page 16 Monday, April 28, 2008 10:03 AM
Adjusting other settings
To adjust other settings:
1 Press TV MENU on the remote control, then press
/
to highlight the Function icon.
The Function menu opens.
VGA Mode
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Setting the parental controls
To set the parental controls:
1 Press TV MENU on the remote control, then press
/
to highlight the Function icon.
The Function menu opens.
TV Mode
16
Menu Set
Zoom Mode
Sleep Timer
Closed Caption
Parental Controls
Restore Default
F u n c t i o n
Select Adjust
TV Mode
Wide1
Off
Off
Exit
F u n c t i o n
Menu Set
Zoom Mode
Sleep Timer
Closed Caption
Parental Controls
Restore Default
Wide1
Off
Off
Select Adjust Exit
2 Press
/
or ENTER to enter the Function menu.
3 Press
/
to select one of the following settings, then press
/
to change the setting. You can select:
• Menu Set—When Menu Set is highlighted, press
/
or ENTER to enter the Menu Set sub-menu. In the
Menu Set sub-menu you can select:
•
Menu
Language-English, French, or
Spanish.
• OSD H-Position (OSD horizontal position).
• OSD V-Position (OSD vertical position).
•
Zoom Mode—Wide1, Wide2, Normal,
Zoom, or Cinema. (In VGA mode, only
Normal or Wide1 are available.)
•
Sleep
Timer—Select the sleep time you want.
•
Closed Caption—Off, CC1, CC2, CC3,
CC4, Text1, Text2, Text3, or Text4.
• Parental Controls—For additional information, see “Setting the parental controls” on page 16.
• Restore Default-Select this option, then press ENTER to restore your TV combo to the factory settings.
4 Press TV MENU one or more times to close the menu.
F u n c t i o n
Menu Set
Zoom Mode
Sleep Timer
Closed Caption
Parental Controls
Restore Default
Wide1
Off
Off
Select Adjust Exit
2 Press
/
or ENTER to enter the Function menu.
3 Press
/
to select Parental Controls, then press
/
or ENTER to enter the
Parental Controls sub-menu. The Enter
Password screen opens.
Enter Password
F u n c t i o n
_ _ _ _
Select Adjust Exit
4 Enter the password with the number buttons on the remote control (the default password is 0000). The
Parental Control
sub-menu opens.
Change Password
System Lock
Movie Rating
TV Rating
Canada Eng
Canada Fre
F u n c t i o n
Off
Select Adjust
Exit
5 Press
/
to select one of the following settings, then press
/
to change the setting. You can select:
• Change Password-For more information, see “Changing the password” on page 17.
• System Lock-On or Off. (Movie Rating,
TV Rating, Canada Eng, and Canada
Fre are only available when System Lock is set to On.) www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 17 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
• Movie Rating-For more information, see
“Setting parental control levels-Movie ratings” on page 17.
• TV Rating-For more information, see
“Setting the parental control level - TV ratings” on page 18.
• Canada Eng-For more information, see
“Setting the parental control level -
Canadian English ratings” on page 19.
• Canada Fre-For more information, see
“Setting the parental control level -
Canadian French ratings” on page 20.
6 Press TV MENU one or more times to close the menu.
Changing the password
To change the password:
1 Press TV MENU on the remote control, then press
/
to highlight the Function icon.
The
Function
menu opens.
4 Enter the password with the number buttons on the remote control (the default password is 0000). The Parental Control sub-menu opens.
Change Password
System Lock
Movie Rating
TV Rating
Canada Eng
Canada Fre
F u n c t i o n
Off
Select Adjust Exit
5 Press
/
to select Change Password, then press
/
or ENTER. The Change
Password screen opens.
F u n c t i o n
Menu Set
Zoom Mode
Sleep Timer
Closed Caption
Parental Controls
Restore Default
Wide1
Off
Off
F u n c t i o n
New Password
Confirm Password
Change Password
_ _ _ _
****
Select Adjust Exit
2 Press
/
or ENTER to enter the
Function menu.
3 Press
/
to select Parental Controls, then press
/
or ENTER to enter the
Parental Controls sub-menu. The Enter
Password screen opens.
Enter Password
F u n c t i o n
_ _ _ _
Select Adjust Exit
6 Press the number buttons to input the new password. The cursor moves to Confirm
Password.
7 Press the number buttons to input the new password again. The message “Password
Changed” appears on the menu.
8 Press TV MENU one or more times to close the menu.
Setting parental control levels-Movie ratings
To set movie control levels:
1 Press TV MENU on the remote control, then press
/
to highlight the Function icon.
The Function menu opens.
Select Adjust
Exit
Menu Set
Zoom Mode
Sleep Timer
Closed Caption
Parental Controls
Restore Default
F u n c t i o n
Wide1
Off
Off
Select Adjust Exit
2 Press
/
or ENTER to enter the Function menu.
www.insignia-products.com
17
08-1154 NS-LTDVD19-09CA - ENG.fm Page 18 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
3 Press
/
to select Parental Controls, then press
/
or ENTER to enter the
Parental Controls sub-menu. The Enter
Password screen opens.
Enter Password
F u n c t i o n
Change Password
System Lock
Movie Rating
TV Rating
Canada Eng
Canada Fre
F u n c t i o n
_ _ _ _
Select Adjust Exit
4 Enter the password with the number buttons on the remote control (the default password is 0000). The Parental Control sub-menu opens.
Off
Rating Description
PG-13
R
NC-17
Parental guidance strongly suggested.
Some material may not be suitable for children under 13 years of age
Restricted. Not suitable for children under 17 years of age unless accompanied by a parent or guardian
Not suitable for children under 17 years of age
Adults only X
7 Press TV MENU one or more times to close the menu.
Note
• If System Lock is not set to On, the configuration settings do not work.
• You can view blocked programs by entering the password. This temporarily switches off the parental lock. To reactivate the parental lock settings, turn off the TV. When the TV is turned on again, your parental lock settings are reactivated.
Setting the parental control level - TV ratings
To set TV parental control levels:
1 Press TV MENU on the remote control, then press
/
to highlight the Function icon.
The Function menu opens.
Select Adjust Exit
5 Press
/
to select Movie Rating, then press
/
or ENTER. The Movie Rating sub-menu opens.
F u n c t i o n
Menu Set
Zoom Mode
Sleep Timer
Closed Caption
Parental Controls
Restore Default
Wide1
Off
Off
Select Adjust Exit
2 Press
/
or ENTER to enter the Function menu.
3 Press
/
to select Parental Controls, then press
/
or ENTER to enter the
Parental Controls sub-menu. The Enter
Password screen opens.
F u n c t i o n
Movie Rating
G
PG
PG-13
R
NC-17
X
Select Adjust Exit
6 Press
/
to select the movie rating you want, then press
/
or ENTER to block or unblock the rating. The lock icon ( ) indicates the level is blocked, the unlocked icon ( ) indicates the level is unblocked.
Movie Ratings are as follows:
Rating
G
PG
Description
General audiences
Parental guidance suggested. Some material may not be suitable for children
Enter Password
Select
F u n c t i o n
Adjust
_ _ _ _
Exit
18
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 19 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
4 Enter the password with the number buttons on the remote control (the default password is 0000). The Parental Control sub-menu opens.
Change Password
System Lock
Movie Rating
TV Rating
Canada Eng
Canada Fre
F u n c t i o n
Off
Select Adjust Exit
5 Press
/
to select TV Rating, then press
/
or ENTER. The
TV Rating sub-menu opens.
7 Press TV MENU one or more times to close the menu.
Note
• If System Lock is not set to On, the configuration settings do not work.
• You can view blocked programs by entering the password. This temporarily switches off the parental lock. To reactivate the parental lock settings, turn off the TV. When the TV is turned on again, your parental lock settings are reactivated.
Setting the parental control level - Canadian
English ratings
To set Canadian English parental control levels:
1 Press TV MENU on the remote control, then press
/
to highlight the Function icon.
The
Function
menu opens.
F u n c t i o n
T V R a t i n g
ALL FV D L S
V
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
Select Adjust
Exit
6 Press
/
to select the TV rating you want, then press
/
or ENTER to block or unblock the rating. The lock icon ( ) indicates the level is blocked, the unlocked icon ( ) indicates the level is unblocked.
TV Ratings are as follows:
Rating Description
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
All children
Children over seven years of age
General audiences
Parental guidance suggested
Parents strongly cautioned
Mature audiences only
Some of the age-based TV Parental Guidelines ratings also have content-based ratings.
Rating
S
V
FV
L
D
Description
Fantasy violence
Adult language
Sexual situations
Violence
Sexually suggestive dialog
F u n c t i o n
Menu Set
Zoom Mode
Sleep Timer
Closed Caption
Parental Controls
Restore Default
Wide1
Off
Off
Select Adjust
Exit
2 Press
/
or ENTER to enter the Function menu.
3 Press
/
to select Parental Controls, then press
/
or ENTER to enter the
Parental Controls sub-menu. The Enter
Password screen opens.
Enter Password
Select
F u n c t i o n
Adjust
_ _ _ _
Exit www.insignia-products.com
19
08-1154 NS-LTDVD19-09CA - ENG.fm Page 20 Monday, April 28, 2008 10:03 AM
4 Enter the password with the number buttons on the remote control (the default password is 0000). The Parental Control sub-menu opens.
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Setting the parental control level - Canadian French ratings
To set Canadian French parental control levels:
1 Press TV MENU on the remote control, then press
/
to highlight the Function icon.
The Function menu opens.
Change Password
System Lock
Movie Rating
TV Rating
Canada Eng
Canada Fre
F u n c t i o n
Off
Select Adjust Exit
5 Press
/
to select Canada Eng, then press
/
or ENTER. The
Canadian
English Rating sub-menu opens.
F u n c t i o n
Menu Set
Zoom Mode
Sleep Timer
Closed Caption
Parental Controls
Restore Default
Wide1
Off
Off
Select Adjust Exit
2 Press
/
or ENTER to enter the Function menu.
3 Press
/
to select Parental Controls, then press
/
or ENTER to enter the
Parental Controls
sub-menu. The
Enter
Password screen opens.
F u n c t i o n
Canada Eng
C
C8+
G
PG
14+
18+
Select Adjust Exit
6 Press
/
to select the TV rating you want, then press
/
or ENTER to block or unblock the rating. The lock icon ( ) indicates the level is blocked, the unlocked icon ( ) indicates the level is unblocked.
Canadian English Ratings are as follows:
Rating Description
C
C8+
G
PG
14+
18+
Children
Children 8 years and above
General audience
Parental guidance suggested
14 years old and above
Adult programming
7 Press TV MENU one or more times to close the menu.
Note
• If System Lock is not set to On, the configuration settings do not work.
• You can view blocked programs by entering the password. This temporarily switches off the parental lock. To reactivate the parental lock settings, turn off the TV. When the TV is turned on again, your parental lock settings are reactivated.
Enter Password
Select Adjust
Change Password
System Lock
Movie Rating
TV Rating
Canada Eng
Canada Fre
F u n c t i o n
Exit
4 Enter the password with the number buttons on the remote control (the default password is 0000). The
Parental Control
sub-menu opens.
Select
F u n c t i o n
Adjust
_ _ _ _
Off
Exit
20
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 21 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
5 Press
/
to select Canada Fre, then press
/
or ENTER. The Canadian
French Rating sub-menu opens.
G
8ans+
13ans+
16ans+
18ans+
F u n c t i o n
Canada Fre
Select Adjust Exit
6 Press
/
to select the TV rating you want, then press
/
or ENTER to block or unblock the rating. The lock icon ( ) indicates the level is blocked, the unlocked icon ( ) indicates the level is unblocked.
Canadian French Ratings are as follows:
Rating Description
G
8ans+
13ans+
16ans+
18ans+
Children
Children 8 years and above
Children 13 years and above
Children 16 years and above
Adult programming
7 Press TV MENU one or more times to close the menu.
Note
• If System Lock is not set to On, the configuration settings do not work.
• You can view blocked programs by entering the password. This temporarily switches off the parental lock. To reactivate the parental lock settings, turn off the TV. When the TV is turned on again, your parental lock settings are reactivated.
Adjusting the settings (VGA mode only)
To adjust the settings for VGA mode:
1 Press TV MENU on the remote control, then press
/
to highlight the Adjust icon. The
Adjust menu opens.
3 Press
/
to select one of the following settings, then press
/
to change the setting. You can select:
•
H-Position
•
V-Position
•
Clock
•
Phase
• Auto Adjust—Press
/
or ENTER to activate Auto Adjust.
4 Press TV MENU one or more times to close the menu.
PC input signal chart
The following chart is the suggested screen resolution.
Format Resolution Freq. (Hz)
VGA
SVGA
XGA
WXGA
640 × 480
720 × 400
800 × 600
800 × 600
1024 × 768
1280 × 720
1360 × 768
1440 × 900
60
70
60
72
60
60
60
60 WXGA+
If your computer is using a video resolution other than those listed above, your TV displays “Input
Signal Out of Range.” If this message appears, adjust your PC display to one of the above resolutions.
Changing your computer's video resolution
The following example shows Windows XP settings. Even if you use a different Windows operating system, the basic setup methods are similar. For changing video resolution on a
Macintosh computer, refer to your Macintosh documentation.
To change your computer's video resolution:
1 Click Start, Control Panel, then double-click
Display. The
Display Properties
dialog box opens.
A d j u s t
H-Position
V-Position
Clock
Phase
Auto Adjust
19
40
0
0
Select Adjust Exit
2 Press
/
or ENTER to enter the Adjust menu.
2 Click the Settings tab.
3 Change the screen resolution setting to a supported resolution (the ideal resolution for your TV is 1440 ×900).
4 Click OK, then click Yes to save your changes.
www.insignia-products.com
21
08-1154 NS-LTDVD19-09CA - ENG.fm Page 22 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Using the DVD player
Playing a DVD
To play a DVD:
1 Press POWER to turn on your TV.
2 Press INPUT, press
/
to select DVD, then press ENTER. You can also press DVD on the remote control to select the DVD mode. The DVD startup screen appears on the screen.
Note
Playback starts automatically if a DVD is already loaded
3 Insert a DVD into the disc slot, with the label facing forward. The DVD player reads the
DVD and displays the opening menu.
4 Press
/
and
/
to highlight a menu item, then press ENTER.
5 During playback:
• Press (Play/Pause) to pause playback. Press it again to resume playback.
• Press to fast-reverse, and press to fast-forward.
• Press chapter, or press chapter.
to skip to the previous to skip to the next
• To play in slow motion (forward or reverse).
• To completely stop DVD playback, press
STOP twice.
6 Press to remove the DVD.
Playing an audio CD
To play an audio CD:
1 Press POWER to turn on your TV.
2 Press INPUT, press
/
to select DVD, then press ENTER. You can also press DVD on the remote control to select the DVD mode. The DVD startup screen appears on the screen.
Note
Playback starts automatically if a CD is already loaded
3 Insert a CD into the disc slot, with the label facing forward.
4 Press (Play/Pause). The tracks play in numerical order.
5 Press STOP to stop playback, or press
(Play/Pause) to pause playback.
6 Press to remove the CD.
To select a specific track for playback:
• After you insert a CD and your TV finishes reading the disc, press the number buttons to enter the track number you want to play, then press ENTER.
Using DVD repeat play
You can repeat chapters, titles, or the entire
DVD.
To use repeat play:
1 While the DVD is playing, press REPEAT to select what you want to repeat. You can select:
• CHAPTER (repeats the current chapter)
• TITLE (repeats the current title)
• ALL (repeats the entire DVD)
2 To stop repeat playback, do one of the following:
• Press REPEAT until ALL disappears from the screen.
• Press STOP twice.
• Eject the DVD.
Using CD repeat play
You can repeat tracks or the entire CD using repeat play.
To use repeat play:
1 While the CD is playing, press REPEAT to select what you want to repeat. You can select:
• ALL (repeats the current CD)
• TRACK (repeats the current track)
2 To stop repeat playback, do one of the following:
• Press REPEAT until ALL disappears from the screen.
• Press STOP twice.
• Eject the CD.
Using a DVD title menu
If a DVD has two or more titles and the DVD has a title menu, you can use this menu to select a title for playback.
To use a DVD title menu:
1 While the DVD is playing, press DVD TITLE.
2 Press
/
or
/
to select a title.
3 Press ENTER. Playback starts with the title you selected.
22
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 23 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Using a DVD menu
If the DVD has a menu, you can use this menu to select features such as the subtitle or audio language.
To use a DVD menu:
1 While the DVD is playing, press DVD MENU.
2 Press
/
or
/
to select a feature, then press ENTER.
If another screen opens, repeat Step 2 and
Step 3 to select a feature.
Searching for a DVD title or chapter
To search for a DVD title or chapter:
1 After inserting a DVD, press T.SEARCH. The following box opens.
2 Press a number button for the track, then press ENTER.
Searching for a specified time on a CD track
To search for a specified time on a CD track:
1 After inserting a CD, press T.SEARCH one or more times until one of the following boxes opens.
2 Press
/
to select a title, then press a number button for the title, then press
ENTER.
3 Repeat Step 2 and Step 3 to select a chapter number.
Searching for a specified time on a DVD
To search for a specified time on a DVD:
1 After inserting a DVD, press T.SEARCH one or more times until one of the following boxes opens.
2 Use the number buttons to enter the amount of time you want to skip on the track, then press ENTER.
Changing the DVD audio language
If a DVD has multiple audio languages, you can change the language.
To change the audio language:
1 Press AUDIO. The on-screen display (OSD) shows the current audio language.
2 If multiple audio languages are available, press AUDIO to cycle through the available languages.
2 Use the number buttons to enter the amount of time you want to skip on the DVD, then press ENTER.
Searching for a specific track on a CD
To search for a specific track:
1 After inserting a CD, press T.SEARCH one or more times until the following box opens.
Note
This feature only works if the DVD was created with multiple audio languages. When you choose an audio language, you temporarily override the audio language setting.
Tip
The audio language can also be changed through the DVD player's main menu or the DVD’s own audio settings.
www.insignia-products.com
23
08-1154 NS-LTDVD19-09CA - ENG.fm Page 24 Monday, April 28, 2008 10:03 AM
Turning DVD subtitles on and off
To turn subtitles on and off:
1 While your TV is in DVD mode, press SETUP.
The General Setup icon is highlighted.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
GOTO GENERAL SETUP PAGE
2 Press ENTER. The
General Setup Page opens.
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
2 To turn off subtitles, press SUBTITLE until
TURN OFF SUBTITLE appears on the screen.
Note
Changing the subtitle language using this method only affects the DVD currently being played. When the DVD is removed or your TV is turned off, the subtitle language reverts to the language setting specified through the DVD player's main menu.
Tip
The subtitle language can also be changed through the DVD player's main menu or the DVD’s own subtitle settings.
Changing the DVD display mode
To change your TV's display mode:
1 While your TV is in DVD mode, press SETUP.
The General Setup icon is highlighted.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE NORMAL/PS
NORMAL/LB
WIDE
OFF ON
ON
OFF
ON
ON
OFF
ON
OFF
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
GOTO GENERAL SETUP PAGE
2 Press ENTER. The
General Setup Page opens.
3 Press
/
to highlight CAPTIONS, then press ENTER.
4 Press
/
to highlight ON or OFF, then press ENTER.
5 Press
one or more times to go back to the previous menu.
6 To close the menu, press
to highlight the
Exit icon, then press ENTER.
Selecting the subtitle language
If a DVD has subtitles, you can change the subtitle language displayed.
To change the subtitle language for the currently playing DVD:
1 Press SUBTITLE one or more times to cycle through the available subtitle languages.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE NORMAL/PS
NORMAL/LB
WIDE
OFF ON
ON
OFF
ON
ON
OFF
ON
OFF
3 Press
/
to select TV DISPLAY, then press ENTER.
4 Press
/
to highlight the type of display you want, then press ENTER.
•
NORMAL/PS
24
Widescreen images are shown on the screen, but with some parts automatically cut off the sides.
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 25 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
•
NORMAL/LB
Widescreen images are shown on the screen with black bars on the top and bottom of the screen.
•
WIDE
Using DVD last memory
Your TV can remember where a DVD stopped playing when your TV is turned off. When your
DVD combo is turned on and you start DVD playback, playback resumes at the point where it stopped.
To use last memory:
1 While your TV is in DVD mode, press SETUP.
The General Setup icon is highlighted.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
Widescreen images fill the entire screen.
5 Press one or more times to go back to the previous menu.
6 To close the menu, press to highlight the
Exit icon, then press ENTER.
Turning the screen saver on and off
To turn the screen saver on and off:
1 While your TV is in DVD mode, press SETUP.
The General Setup icon is highlighted.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
GOTO GENERAL SETUP PAGE
2 Press ENTER. The General Setup Page opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE NORMAL/PS
NORMAL/LB
WIDE
OFF ON
ON
OFF
ON
ON
OFF
ON
OFF
GOTO GENERAL SETUP PAGE
2 Press ENTER. The
General Setup Page opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE NORMAL/PS
NORMAL/LB
WIDE
OFF ON
ON
OFF
ON
ON
OFF
ON
OFF
3 Press
/
to highlight LAST MEMORY, then press ENTER.
4 Press
/
to highlight ON or OFF, then press ENTER.
5 Press one or more times to go back to the previous menu.
6 To close the menu, press to highlight the
Exit icon, then press ENTER.
Setting up DVD speaker output
To set up speaker output:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
3 Press
/
to highlight SCREEN SAVER, then press ENTER.
4 Press
/
to highlight ON or OFF, then press ENTER.
5 Press one or more times to go back to the previous menu.
6 To close the menu, press to highlight the
Exit icon, then press ENTER.
www.insignia-products.com
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
GOTO GENERAL SETUP PAGE
25
08-1154 NS-LTDVD19-09CA - ENG.fm Page 26 Monday, April 28, 2008 10:03 AM
2 Press
/
to select the Audio icon , then press ENTER. The Audio Setup Page opens.
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
2 Press
/
to select the Audio icon then press ENTER. The Audio Setup Page
, opens.
3 Press
/
to highlight Speaker Setup, then press ENTER. The
Speaker Setup Page opens.
3 Press
/
to highlight DOLBY DIGITAL
SETUP, then press ENTER. The Dolby
Digital Setup Page opens.
4 Press
/
to highlight DOWNMIX, then press ENTER.
5 Press
/
to highlight LT/RT or STEREO, then press ENTER.
• LT/RT-On a disc recorded with a multichannel soundtrack, the output signal will be incorporated into the left and right channel.
• STEREO-On a disc recorded with a multichannel soundtrack, the output signal will be incorporated into stereo.
6 Press
one or more times to go back to the previous menu.
7 To close the menu, press
to highlight the
Exit icon, then press ENTER.
Setting up DVD Dolby Digital
To set up Dolby Digital:
1 While your TV is in DVD mode, press SETUP.
The
Setup Menu
opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
GOTO GENERAL SETUP PAGE
4 Press
/
to highlight DUAL MONO or
D.R.C, then press ENTER.
• DUAL MONO-This is the output mode for the left and right signals of the selected audio output. If it is set to MIXED MONO, the function only works when the DVD uses 5.1-channel sound.
• D.R.C-Select to adjust the linear compression rate to obtain different compression results for the signals.
5 Press
/
to highlight STEREO, LEFT
MONO, RIGHT MONO, or MIXED MONO, then press ENTER.
6 Press
/
to change the setting, then press
ENTER.
7 Press one or more times to go back to the previous menu.
8 To close the menu, press to highlight the
Exit icon, then press ENTER.
26
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 27 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Using the DVD equalizer
You can select preset graphic equalizer patterns according to the genre of the music being played. You can also adjust the equalizer settings.
To use the equalizer:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
Setting up DVD 3D sound
To set up 3D sound:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
GOTO GENERAL SETUP PAGE
2 Press
/
to select the Audio icon then press ENTER. The Audio Setup Page
, opens.
GOTO GENERAL SETUP PAGE
2 Press
/
to select the Audio icon , then press ENTER. The Audio Setup Page opens.
3 Press
/
to highlight 3D PROCESSING, then press ENTER. The 3D Processing Page opens.
3 Press
/
to highlight CHANNEL
EQUALIZER, then press ENTER. The
Channel Equalizer Page
opens.
4 Press
/
to highlight EQ TYPE, then press ENTER.
5 Press
/
to select one of the following preset equalizer patterns, then press
ENTER:
•
NONE
•
ROCK
•
POP
•
LIVE
•
DANCE
•
TECHNO
•
CLASSIC
•
SOFT
6 Press
one or more times to go back to the previous menu.
7 To close the menu, press
to highlight the
Exit icon, then press ENTER.
4 Press
/
to select one of the following options, then press ENTER:
• V SURR-Turns virtual surround sound on and off.
• REVERB MODE-Select a reverb mode.
5 Press
/
to select from the options for the mode you have chosen, then press ENTER.
6 Press
one or more times to go back to the previous menu.
7 To close the menu, press
to highlight the
Exit icon, then press ENTER.
www.insignia-products.com
27
08-1154 NS-LTDVD19-09CA - ENG.fm Page 28 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Setting DVD video options
To set up video options:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
Setting a DVD parental password
To set or change a password:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
GOTO GENERAL SETUP PAGE
2 Press
/
to select the Video icon , then press ENTER. The Video Setup Page opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
GOTO GENERAL SETUP PAGE
2 Press
/
to select the Password Setup
Password
Setup Page opens.
- - VIDEO SETUP PAGE - -
SHARPNESS MID HIGH
MEDIUM
LOW
BRIGHTNESS
CONTRAST
BLACK LEVEL
00
00
NORMAL
LIGHTER
3 Press
/
to highlight one of the following options, then press ENTER to select:
• SHARPNESS—Sets the sharpness level.
Press
/
to highlight HIGH, MEDIUM, or LOW, then press ENTER to select.
• BRIGHTNESS—Sets the brightness level. Press
/
to adjust the level, then press ENTER to confirm.
• CONTRAST—Sets the contrast level.
Press
/
to adjust the level, then press ENTER to confirm.
• BLACK LEVEL—Sets the black level.
Press
/
to highlight NORMAL or
LIGHTER, then press ENTER to select.
4 Press
one or more times to go back to the previous menu.
5 To close the menu, press
to highlight the
Exit icon, then press ENTER.
3 Press
/
to select one of the following options, then press ENTER:
• PW MODE-Select ON to turn on the password feature. PARENTAL is dim and cannot be selected. Select OFF to turn off the password feature. PARENTAL can be selected.
• PASSWORD CHANGE-Select to change the password. The preset factory password is 99999.
• PARENTAL-If the parental lock feature is turned on, this lets you block and unblock
DVD ratings. You cannot play DVDs that are rated higher than the setting you select.
4 Press
/
to select from the options for the item you have chosen, then press ENTER.
5 Press one or more times to go back to the previous menu.
6 To close the menu, press to highlight the
Exit icon, then press ENTER.
28
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 29 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Changing DVD preferences
You can change preferences only when the player is in STOP mode and the PW mode is set to OFF on the Password Setup page.
To change preferences:
1 While your TV is in DVD mode, press SETUP.
The Setup Menu opens.
-- GENERAL SETUP PAGE --
TV DISPLAY
CAPTIONS
SCREEN SAVER
LAST MEMORY
WIDE
OFF
ON
ON
• DISC MENU-Changes the language for the disc menu. If the language you select is available on the DVD, the disc menu is displayed in that language. If the language you select is not available on the DVD, the disc menu is displayed in the original language.
• DEFAULT-Resets the DVD player settings to the default settings.
4 Press
/
to select from the options for the item you have chosen, then press ENTER.
5 Press one or more times to go back to the previous menu.
6 To close the menu, press to highlight the
Exit icon, then press ENTER.
Maintaining
Attaching the pedestal stand
To attach the pedestal stand:
1 Place a towel or cushioning on a flat surface and lay the TV on it’s front.
2 Unscrew the two ST3 screws (1) shown in the illustration.
GOTO GENERAL SETUP PAGE
2 Press
/
to select the Preferences icon then press ENTER. The Preferences Page opens.
-- PREFERENCE PAGE --
AUDIO ENG ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
SUBTITLE OFF ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
OFF
DISC MENU ENG ENGLISH
FRENCH
SPANISH
CHINESE
JAPANESE
DEFAULT RESET
1
1
3 Remove the shield panel from the bottom of the back of the TV.
3 Press
/
to select one of the following options, then press ENTER:
• AUDIO-Changes the DVD audio language. If the language you select is available on the DVD, the audio is played in that language. If the language you select is not available on the DVD, the original audio is played.
• SUBTITLE-Changes the DVD subtitle language. If the language you select is available on the DVD, subtitles are displayed in that language. If the language you select is not available on the DVD, the original subtitle language is displayed.
29
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 30 Monday, April 28, 2008 10:03 AM
4 Attach the pedestal stand in the direction shown.
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Care and handling of discs
Handling discs
Do not touch the playback side of the disc. Hold the disc by the edges so that fingerprints do not get on the surface. Never stick paper or tape on the disc.
5 Secure the pedestal stand with four M4 screws (2).
Storing discs
After playing, store the disc in its case. Do not expose the disc to direct sunlight or sources of heat and never leave it in a parked car exposed to direct sunlight.
Cleaning discs
Fingerprints and dust on the disc can cause poor picture quality and sound distortion. Before playing, clean the disc with a clean cloth. Wipe the disc from the center out.
2 2
2
2
6 Reattach the shield panel with the ST3 screws (1) you previously removed.
1
1
Cleaning the cabinet
Wipe the front panel and other exterior surfaces of your TV with a soft cloth lightly dampened with lukewarm water. Never use a solvent or alcohol to clean your TV. Do not spray insecticide near your TV. Such chemicals may cause damage and discoloration to the exposed surfaces.
Do not use strong solvents such as alcohol, benzine, thinner, commercially available cleaners, or anti-static spray intended for older vinyl records.
Note
Never operate this product immediately after moving it from a cold location to a warm location.
Leave it for two or three hours without operating it.
If you use this product in such a situation, it may damage tapes, discs, or internal parts.
Troubleshooting
TV
Problem Solution
No picture or sound
Picture is OK, but no sound
Sound is OK, but no color
• Check all cable connections.
• Make sure that your TV is turned on.
Check the volume level and mute setting.
The picture has overlapped images
Picture has snow
• Check the color control and adjust it.
• Check the program's color features because it may be a black and white movie.
Make sure that the antenna is installed correctly.
If not, adjust the antenna toward the broadcasting station.
• Check the antenna and its connection. If there are problems, correct them. If all connections are tight, the problem may be with a faulty antenna or cable.
• Check car traffic or neon signs that may disrupt the image.
30
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 31 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
Problem Solution
Stripes on picture Check for interference from other electronic devices, such as radios and televisions, and keep magnetic or electronic devices away from your TV.
Bad stereo or
SAP sound
A long broadcast distance, or interference from radio waves, can cause bad sound reception. If so, change the mode to Mono.
Remote control does not work
"Input Signal Out of Range" appears on the screen
“No Signal” appears on the screen
Remove obstacles between the remote control and the player. Point the remote control at your
TV's IR sensor. Install fresh batteries.
Check the resolution and frequency of your computer, and adjust it to the optimum resolution for this TV: 1440×900 at 60Hz.
Make sure that the cable is firmly connected to the computer and TV.
Image is not clear Adjust the phase control.
Image is not centered
Adjust the horizontal control.
Picture has a few bright or dark dots
A few bright or dark dots on an LCD screen is normal. It does not affect the operation of this
TV.
DVD
Problem
No sound
No image
Bad sound quality
Disc cannot be played
The player doesn't operate normally
Remote control does not work
Solution
• Make sure that your TV or amplifier is working correctly.
• Make sure that the amplifier is set to receive DVD signal output.
• Make sure that your TV is working correctly.
• Make sure the color system is set correctly.
• Make sure that the audio output mode is set correctly.
• Make sure that the audio connection between your TV and amplifier (if used) is secure.
• Make sure that the disc is inserted with the label facing forward.
• Clean the disc.
• Moisture has condensed in the player.
Remove the disc and leave the player on for about an hour to dry out.
Disconnect the power plug, then reconnect it.
• Remove obstacles between the remote control and the player.
• Point the remote control at your TV's IR sensor.
• Install fresh batteries.
Specifications
LCD
Dimensions
Weight
TV
Power
Sound
Terminals
DVD player
Operating conditions
Panel
Resolution
Viewing angle
Contrast ratio
Brightness (cd/m
2
)
With stand
Without stand
TV standard
Tuning system
Frequency range
Stereo
CATV
Input
Consumption (Max.)
Output
A/V in
Component
PC in
HDMI
Antenna in
Signal System
Playable discs
Temperature
Humidity
Atmospheric pressure
19" WIDE TFT LCD
1440 × 900
150°/135°
700:1(Typ.)
300 (Typ.)
18.5 × 15.4 × 7.9 in.
(470 × 390 × 199.5 mm)
18.5 × 13.8 × 2.7 in.
(470 × 350 × 69 mm)
15.48 lbs. (7.02 kg)
NTSC
Electronic tuning system
VHF/UHF
BTSC
125 channels
100-240V AC, 50/60 Hz
75 W
3W×2
Video, S-Video, Audio
L/R
Y, Pb (Cb), Pr (Cr)
D-SUB 15-pin RGB in
HDMI compliant (type
A connector)
F-type
NTSC
DVD:12cm
CD:12cm
5°C~35°C
20%~80% RH
86KPa~106 KPa
Legal notices
Macrovision statement
This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision
Corporation and other rights owners. Use of this copyright protection technology must be authorized by Macrovision
Corporation, and is intended for home and other limited viewing uses only unless otherwise authorized by
Macrovision Corporation. Reverse engineering or disassembly is prohibited.
Copyright
© 2008 Insignia. Insignia and the Insignia logo are trademarks of Best Buy Enterprise Services, Inc. Other brands and product names are trademarks or registered trademarks of their respective holders. Specifications and features are subject to change without notice or obligation.
For service and support call (877) 467-4289.
31
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 32 Monday, April 28, 2008 10:03 AM
One-Year Limited Warranty
Insignia Products (“Insignia”) warrants to you, the original purchaser of this new NS-LTDVD19-09CA (“Product”), that the Product shall be free of defects in the original manufacture of the material or workmanship for a period of one (1) year from the date of your purchase of the Product
(“Warranty Period”). This Product must be purchased from an authorized dealer of Insignia brand products and packaged with this warranty statement. This warranty does not cover refurbished Product. If you notify Insignia during the Warranty Period of a defect covered by this warranty that requires service, terms of this warranty apply.
How long does the coverage last?
The Warranty Period lasts for 1 year (365 days) from the date you purchased the Product. The purchase date is printed on the receipt you received with the Product.
What does this warranty cover?
During the Warranty Period, if the original manufacture of the material or workmanship of the Product is determined to be defective by an authorized Insignia repair center or store personnel, Insignia will (at its sole option): (1) repair the
Product with new or rebuilt parts; or (2) replace the Product at no charge with new or rebuilt comparable products or parts. Products and parts replaced under this warranty become the property of Insignia and are not returned to you.
If service of Products or parts are required after the Warranty
Period expires, you must pay all labor and parts charges.
This warranty lasts as long as you own your Insignia Product during the Warranty Period. Warranty coverage terminates if you sell or otherwise transfer the Product.
How to obtain warranty service?
If you purchased the Product at a retail store location, take your original receipt and the Product to the store you purchased it from. Make sure that you place the Product in its original packaging or packaging that provides the same amount of protection as the original packaging. If you purchased the Product from an online web site, mail your original receipt and the Product to the address listed on the web site. Make sure that you put the Product in its original packaging or packaging that provides the same amount of protection as the original packaging.
To obtain in-home warranty service for a television with a screen 25 inches or larger, call 1-888-BESTBUY. Call agents will diagnose and correct the issue over the phone or will have an Insignia-approved repair person dispatched to your home.
Where is the warranty valid?
This warranty is valid only to the original purchaser of the product in the United States and Canada.
What does the warranty not cover?
This warranty does not cover:
• Customer instruction
• Installation
• Set up adjustments
• Cosmetic damage
• Damage due to acts of God, such as lightning strikes
• Accident
• Misuse
• Abuse
• Negligence
• Commercial use
• Modification of any part of the Product, including the antenna
• Plasma display panel damaged by static
(non-moving) images applied for lengthy periods
(burn-in).
This warranty also does not cover:
• Damage due to incorrect operation or maintenance
• Connection to an incorrect voltage supply
• Attempted repair by anyone other than a facility authorized by Insignia to service the Product
• Products sold as is or with all faults
• Consumables, such as fuses or batteries
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
• Products where the factory applied serial number has been altered or removed
REPAIR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS YOUR EXCLUSIVE REMEDY. INSIGNIA
SHALL NOT BE LIABLE FOR ANY INCIDENTAL OR
CONSEQUENTIAL DAMAGES FOR THE BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT,
INCLUDING, BUT NOT LIMITED TO, LOST DATA, LOSS OF
USE OF YOUR PRODUCT, LOST BUSINESS OR LOST
PROFITS. INSIGNIA PRODUCTS MAKES NO OTHER
EXPRESS WARRANTIES WITH RESPECT TO THE
PRODUCT, ALL EXPRESS AND IMPLIED WARRANTIES
FOR THE PRODUCT, INCLUDING, BUT NOT LIMITED TO,
ANY IMPLIED WARRANTIES OF AND CONDITIONS OF
MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE LIMITED IN DURATION TO THE
WARRANTY PERIOD SET FORTH ABOVE AND NO
WARRANTIES, WHETHER EXPRESS OR IMPLIED, WILL
APPLY AFTER THE WARRANTY PERIOD. SOME STATES,
PROVINCES AND JURISDICTIONS DO NOT ALLOW
LIMITATIONS ON HOW LONG AN IMPLIED WARRANTY
LASTS, SO THE ABOVE LIMITATION MAY NOT APPLY TO
YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS,
WHICH VARY FROM STATE TO STATE OR PROVINCE TO
PROVINCE.
Contact Insignia:
For customer service please call 1-877-467-4289 www.insignia-products.com
INSIGNIA™ is a trademark of Best Buy Enterprise Services,
Inc.
Distributed by Best Buy Purchasing, LLC.
Insignia, 7601 Penn Avenue South, Richfield, Minnesota,
U.S.A.
32
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 33 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo www.insignia-products.com
33
08-1154 NS-LTDVD19-09CA - ENG.fm Page 34 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo
34
www.insignia-products.com
08-1154 NS-LTDVD19-09CA - ENG.fm Page 35 Monday, April 28, 2008 10:03 AM
Insignia NS-LTDVD19-09CA 19” LCD TV/DVD Combo www.insignia-products.com
35
08-1154 NS-LTDVD19-09CA - ENG.fm Page 36 Monday, April 28, 2008 10:03 AM
TM
www.insignia-products.com
(877) 467-4289
Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
© 2008 Best Buy Enterprise Services, Inc.
All rights reserved. INSIGNIA is a trademark of Best Buy Enterprise Services, Inc. Registered in some countries.
All other products and brand names are trademarks of their respective owners.
ENGLISH
08-1154
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement
Table of contents
- 3 Introduction
- 5 Safety information
- 7 Features
- 7 Accessories
- 7 Front
- 8 Remote
- 8 Installing remote control batteries
- 9 Using the remote control
- 10 Setting up your TV
- 10 Connecting an antenna, cable TV, or satellite TV
- 10 Connecting a standard video device
- 11 Connecting a component video device
- 11 Connecting a computer
- 12 Using the basic controls
- 12 Turning the TV on and off
- 12 Adjusting the volume
- 12 Changing the video mode
- 12 Using your TV
- 12 Selecting the TV signal source
- 12 Changing channels
- 12 Using the on-screen menus
- 12 Memorizing channels
- 13 Changing the tuning settings
- 13 Manually editing channels
- 14 Labeling a channel
- 14 Enabling digital noise reduction
- 14 Adjusting picture settings
- 15 Adjusting audio settings
- 15 Adjusting equalizer settings
- 16 Adjusting other settings
- 16 Setting the parental controls
- 21 Adjusting the settings (VGA mode only)
- 21 PC input signal chart
- 21 Changing your computer's video resolution
- 22 Using the DVD player
- 22 Playing a DVD
- 22 Playing an audio CD
- 22 Using DVD repeat play
- 22 Using CD repeat play
- 22 Using a DVD title menu
- 23 Using a DVD menu
- 23 Searching for a DVD title or chapter
- 23 Searching for a specified time on a DVD
- 23 Searching for a specific track on a CD
- 23 Searching for a specified time on a CD track
- 23 Changing the DVD audio language
- 24 Turning DVD subtitles on and off
- 24 Selecting the subtitle language
- 24 Changing the DVD display mode
- 25 Turning the screen saver on and off
- 25 Using DVD last memory
- 25 Setting up DVD speaker output
- 26 Setting up DVD Dolby Digital
- 27 Using the DVD equalizer
- 27 Setting up DVD 3D sound
- 28 Setting DVD video options
- 28 Setting a DVD parental password
- 29 Changing DVD preferences
- 29 Maintaining
- 29 Attaching the pedestal stand
- 30 Troubleshooting
- 31 Specifications
- 32 One-Year Limited Warranty