advertisement
KHTM1200 Series
MEDIUM ENVIRONMENTAL HOUSING
(KHTM1200)
Mount Sold Separately
(KHTM1201)
Mount Sold Separately
The new KHTM series housing is a stylish and functional camera enclosures, with a design focus of simplifying installations. The new side entry design of the KHTM allows total access to all sides of the camera, with the help of the hinged mounting tray. A camera and lens can be entirely installed, adjusted, and tested without shifting the position of the housing. After the camera is set up, the lid is simply closed and the adjustments are uninterrupted.
The signature look of the KHTM incorporates many features such as a flexible-mounting track, allowing this housing to fit any mount regardless of its hole patterns. Optional features include a sunshield, and a factory installed heater and blower option.
The KHTM housing is constructed of die-cast and extruded aluminum with a two-tone gray epoxy powder coating, making it attractive, durable, as well as corrosion resistant. Weather and dust proof are accomplished with durable neoprene gaskets making the housing suitable for all indoor and outdoor applications.
These housings can accommodate 1/2" and 1/3" cameras with fixed and varifocal lenses.
• Signature Ultrak ® contempory design
• Die-cast and extruded aluminum construction
• Total access design allows easy access to camera from all sides
• Integrated “Flex mount” adjustable mounting track
• 3/4", 1/2" and 1/4" cable entry glands (PG21, PG13.5, and
PG9)
• Sunshield option
• Indoor and outdoor installations
• Epoxy powder coated for corrosion resistance
• Dust-proof, IP66 weatherproof rating
• Pre-assembled heater and blower models available
• 2 year limited warranty
• Dual positive locking clamps
• Reversible camera mounting tray to elevate low profile cameras
• Cost effective
KHTM1200 Series
TECHNICAL SPECIFICATIONS
MODELS
KHTM1200
RECOMMENDED MOUNTS
MHC21SHG
MHW13THG
Ceiling “J” mount, enclosure, 21”H, 30 lbs
(13.5kg) max, Ultrak ® Grey
Wall mount, enclosure 13” L, 30 lbs (13.5kg) max, internal cable channel, Ultrak ® Grey KHTM1201
KHTM12N2
KHTM12N3
Enclosure, 15" front to rear length, top access, indoor/outdoor for 1/2" and 1/3" CCD cameras with fixed focal length lenses
Same as KHTM except supplied with sunshield
Same as KHTM except supplied with sunshield and 24VAC heater (20 watt)
Same as KHTM1200 except supplied with sunshield and 24VAC heater (20 watt) and 24VAC blower
Same as KHTM1200 except supplied with
MHW13THG wall mounts
KHTM12WM
End View
5.8" (148 mm)
MECHANICAL
Camera Mounting
Max Camera Size
KHTM1200
KHTM12N2/N3
Viewing Area:
KHTM12
Viewing Window
KHTM12
Cable Entry
Dimensions
Weight:
KHTM1200
GENERAL
Construction
Finish
Environmental
OPTIONS
KHTM12SS
KHTMBKN1
KHTMHKN1
KHTMHKN2
Reversible slotted camera sled
3.1W x 3.2H x 11.4L in. (78 x 82 x 290mm)
3.1W x 3.2H x 9L in. (78 x 82 x 230mm)
2.9 x 2.4 in. (73 x 61mm)
Clear 1/8" double density glass
3 glands, PG9, PG16, PG21
See drawings
4.2 lbs (1.90kg)
Extruded and die-cast aluminum
Ultrak ® grey two tone, epoxy powder coating
IP66 rated
Sunshield for KHTM12
Blower kit for KHTM12
Heater, thermostat controlled kit for
KHTM1200, 24VAC (20 watt)
Heater and blower, thermostat controlled heater and blower kit for KHTM1200, 24VAC
2.9" (73 mm)
Side View
16.0" (406 mm)
12.0" (305 mm)
15.6" (397 mm)
Bottom View
HEATER SPECIFICATIONS
Power Supply
Power Consumption
Heater On
Heater Off
24VAC
20W t < 5 +/-3 t < 41 +/-5 t > 15 +/-3 t > 59 +/-5
BLOWER SPECIFICATIONS
Power Supply
Power Consumption
Blower On
Blower Off
24VAC
3.4w
t > 35 +/-3 t > 95 +/-3 t < 20 +/-3 t < 68 +/-5
FORM 7014 REV. 07/14/03 ©Ultrak® is a registered trademark of Ultrak, Inc. 2003.
Design and specifications subject to change without notice.
Conversion: 1" = 25.4mm
Measurement conversions are approximate
Ultrak Worldwide Support Center:
1305 Waters Ridge Drive
Lewisville, TX 75057
(800) 796-2288 (972) 353-6500
Fax (972) 353-6670 www.ultrak.com
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project