User manual | JVC 0910TMMMDWMTS Portable CD Player User Manual

JVC 0910TMMMDWMTS Portable CD Player User Manual
ENGLISH
CAUTION: Proper Ventilation
To avoid risk of electric shock and fire, and to prevent damage,
locate the apparatus as follows:
1. Front: No obstructions and open spacing.
2. Sides/Top/Back: No obstructions should be placed in the
areas indicated by the dimensions in the illustration.
3. Bottom: Place on the level surface. Maintain an adequate air
path for ventilation by placing on a stand with a height of
10 cm or more.
CD PORTABLE SYSTEM
RD-N1
RD-N1W
INSTRUCTIONS
Side view/Côté
(Europe only)
LVT2130-002B [J, C, B, US, A, UX]
0910TMMMDWMTS
©2010 Victor Company of Japan, Limited
Precautions
Notes on the power cord
• When you go away for an extended period of time,
remove the plug from the wall outlet.
• When unplugging the System from the wall outlet,
always pull the plug, not the power cord.
• Do not handle the power cord with wet hands.
• Disconnect the power cord before cleaning the System or
moving the System.
• Do not alter, twist or pull the power cord, or put anything
heavy on it, which may cause fire, electric shock, or other
accidents.
Avoid moisture, water, dust, and high temperatures
• Do not place the System in moist or dusty places.
• If water gets inside the System, turn off the power and
remove the plug from the wall outlet, then consult your
dealer. Using the System in this state may cause a fire or
electrical shock.
• Do not expose the System to direct sunlight or place it
near a heating device.
Compatible iPod models
Audio
iPod nano
iPod nano (2nd Generation)
iPod nano (3rd Generation)
iPod nano (4th Generation)
iPod nano (5th Generation)
iPod mini
iPod mini (2nd Generation)
iPod (4th Generation)
iPod classic
iPod photo (4th Generation)
iPod video (5th Generation)
iPod touch
iPod touch (2nd Generation and Fall ‘09)
If iPod does not play correctly, update iPod software to the
latest version.
• For details about updating iPod, check on the Apple web
site <http://www.apple.com>.
Amplifier section
Output Power:
Audio Input:
Digital input:
Tuner
FM tuning range:
87.50 MHz – 108.00 MHz
Disc player
Dynamic range:
Wow and flutter:
80 dB
Immeasurable
Notes on installation
• Select a place which is level, dry and neither too hot nor
too cold—between 5˚C and 35˚C (41°F and 95 °F).
• Do not install the System in a place subject to vibrations.
• Do not put heavy objects on the System.
USB
USB specification:
Compatible device:
Compatible system:
Output power:
To prevent malfunction or damage to the System
• Do not insert any metallic objects, such as wires, hairpins,
coins, etc. into the System.
• Do not block the vents.
iPod
Output power:
There are no user-serviceable parts inside. If anything
goes wrong, unplug the power cord and consult your
dealer.
For customer use:
Enter below the Model No. and Serial No. which are
located either on the rear, bottom or side of the cabinet.
Retain this information for future reference.
Model No.
Serial No.
6 W (3 W + 3 W) at 3 Ω (10% THD)
AUDIO IN: Stereo mini (ø 3.5 mm)
250 mV/47 kΩ
USB MEMORY
DC 5 V
Handling discs
• Remove the disc from its case by holding it at the edge
while pressing the center hole lightly.
• Do not touch the shiny surface of the disc, or bend the
disc.
• Put the disc back in its case after use.
• Be careful not to scratch the surface of the disc when
placing it back in its case.
• Avoid exposure to direct sunlight, temperature extremes,
and moisture.
To clean the disc:
Wipe the disc with a soft cloth in a straight line from center
to edge.
Cleaning the System
• Stains should be wiped off with a soft cloth. If the System
is heavily stained, wipe it with a cloth soaked in waterdiluted neutral detergent and wrung well, then wipe
clean with a dry cloth.
• Since the System may deteriorate in quality, become
damaged or get its paint peeled off, be careful about the
following:
– DO NOT wipe it hard.
– DO NOT wipe it with thinner or benzine.
– DO NOT apply any volatile substances such as
insecticides to it.
– DO NOT allow any rubber or plastic to remain in contact
for a long time.
Design and specifications are subject to change without
notice.
500 mA
❍ Prepare the remote control
After unpacking, check to make sure that you have all
the following items:
• Remote control (× 1)
• Lithium coin battery CR2025 (× 1)
– The battery has been installed in the remote
control when shipped from the factory.
• FM antenna (× 1)
• AC plug adaptor (× 1) (Not supplied for USA,
Canadian, European, Australian and Saudi Arabian
models.)
If anything is missing, consult your dealer immediately.
When you use the remote control for the first time, pull out the insulation sheet.
Connections
Wire loop
• When you replace the battery, place the
edge of the battery under the wire loop.
Do not connect the AC power cord until all other connections have been made.
CAUTION for mains (AC) line
BEFORE PLUGGING IN, do check that your mains (AC) line
voltage corresponds with the position of the voltage selector
switch provided on the outside of this equipment and, if
different, reset the voltage selector switch, to prevent from a
damage or risk of fire/electric shock.
\ Power plug is not inserted securely. Plug it in securely.
\ There is a time limit. Start the procedure again.
\ The path between the remote control and the remote sensor on the
System is blocked.
\ The battery is exhausted.
\ Headphones are connected.
\ Antenna connection is incorrect or loose.
\ The FM antenna is not properly extended and positioned.
\ Electrostatic discharge from your body may cause noise. If this
happens, turn the System off then on again.
iPod
Initial settings
\ The iPod battery is low or exhausted. Charge the iPod battery.
Disc/USB
“NO SONG” appears on the display.
ID3 Tag on an MP3 file cannot be shown.
Groups and tracks are not played back as
you expect.
The disc/USB mass storage class device
sound is discontinuous.
Sound from the USB mass storage class
device is interrupted.
The disc tray does not open or close.
You can set the clock only when the System is turned
off (on standby.)
❍ Timer
❍ Display settings
Sleep Timer
Display information
You can set Sleep Timer only when the System is turned
on.
To display ID3/WMA tag information
To check the current time while the System is turned
on
1
(Hold)
2
ID3 ON
Specify the time.
2
Adjust the hour and minute.
ID3 OFF
ID3/WMA tag information is displayed automatically
as follows:
(Hold)
• If you have already set the clock before, press and
hold CLOCK until the clock is flashing.
During playback of MP3/WMA...
1
Setting the clock
\ The disc is placed upside down. Place the disc with the label side
facing up.
\ The disc is recorded using “packet writing (UDF file system).” It cannot
be played.
\ The USB mass storage class device is not connected properly.
\ MP3/WMA files are not recorded on the disc or USB mass storage class
device.
\ There are two types of ID3 Tag—Version 1 and Version 2. This System
can only show ID3 Tag Version 1.
\ Playing order is determined when the groups and tracks are recorded.
It depends on the writing application.
\ The disc is scratched or dirty.
\ MP3/WMA files have not been properly recorded onto the USB mass
storage class device.
\ Noise and static electricity may stop the sound. In this case, disconnect
and connect the USB mass storage class device again after turning off
the System.
\ The AC power cord is not plugged in.
\ Disc ejection is prohibited. “DISC LOCKED” appears (see “Prohibiting
disc ejection” in “Disc/USB” on page 2).
The time is displayed for a few seconds.
SLEEP 10
If there is a power failure
The clock loses its settings. You need to set the clock
again.
SLEEP 20
SLEEP 30
OFF
Group
File
Title
SLEEP 90
Album
• To check the remaining time until the System shuts
off, press and hold CLOCK.
Artist
• The clock may gain or lose 1 to 2 minutes per month.
You may need to readjust the clock periodically.
❍ Sound adjustments
Recording
Unable to record onto a USB mass
storage class device.
If the wall outlet does not match the AC plug, use the supplied AC plug adaptor.
(Not supplied for USA, Canadian, European, Australian and Saudi Arabian models.)
Sound and other adjustments
FM radio
The disc/USB mass storage class device
does not play.
For better FM reception
Disconnect the supplied FM antenna, and connect to an outdoor FM antenna (not supplied)
using a 75 Ω wire with coaxial type connector (IEC or DIN45325).
Mains (AC) Line Instruction (Asia and Saudi Arabia only)
General
The iPod does not play, but “IPOD”
appears on the display.
FM antenna (supplied): Extend it so that you can obtain the best reception.
To a wall outlet
If you are having a problem with your System, check this list for a possible solution before calling for service.
Hard to listen to broadcasts because of
noise.
CAUTION:
Danger of explosion if battery is incorrectly replaced. Replace only with the same
or equivalent type.
• Microsoft and Windows Media are either registered
trademarks or trademarks of Microsoft Corporation in
the United States and/or other countries.
• iPod is a trademark of Apple Inc., registered in the U.S.
and other countries.
• “Made for iPod” means that an electronic accessory
has been designed to connect specifically to iPod and
has been certified by the developer to meet Apple
performance standards.
• Apple is not responsible for the operation of this device
or its compliance with safety and regulatory standards.
• This System can play back...
– Audio CD and CD-R/CD-RW in Audio CD format
– MP3/WMA files on a CD-R/CD-RW (ISO 9660 format) or
USB mass storage class device (maximum data transfer
rate: 2 Mbps)
• This System cannot play “packet write” discs.
• For MP3/WMA playback...
– Some MP3/WMA files may not be played back due to
their recording conditions.
– This System can play only discs of ISO 9660 Level 1 or
Level 2.
– It is recommended to record each file at a sampling rate
of 44.1 kHz and at a data transfer rate of 128 kbps.
– This System can recognize a total of 999 tracks and 99
groups.
– This System can show the Tag data (version 1).
• For playback of files on a USB mass storage class device...
– You cannot play back files larger than 2 GB.
– This System may not play back some USB mass storage
class devices and does not support DRM (Digital Rights
Management).
No sound is heard.
NOTES:
• Store the battery in a place where children cannot reach. If a child accidentally
swallows the battery, consult a doctor immediately.
• To prevent the battery from overheating, cracking, or starting a fire:
– Do not recharge, short, disassemble or heat the battery or dispose of it in a
fire.
– Do not leave the battery with other metallic materials.
– Wrap the battery with tape and insulate when throwing away or saving it.
– Do not poke the battery with tweezers or similar tools.
• Dispose of battery in the proper manner, according to federal, state, and local
regulations.
• The battery (battery pack or battery installed) shall not be exposed to excessive
heat source such as sunshine, fire or the like.
Lithium coin battery
(product number: CR2025)
For USA-California Only
This product contains a CR Coin Cell Lithium Battery
which contains Perchlorate Material—special handling
may apply.
See www.dtsc.ca.gov/hazardouswaste/perchlorate
Troubleshooting
Power does not come on.
Adjustments or settings are suddenly
canceled before you finish.
Unable to operate the System from the
remote control.
To replace the battery in the remote control
NOTES:
• Make sure the antenna conductors do not touch any other terminals, connecting cords
or the power cord. Also, keep the antennas away from metallic parts of the System,
connecting cords, and the AC power cord. Otherwise, it could cause poor reception.
Playable disc/file types
Maintenance
To get the best performance of the System, keep your discs
and the mechanism clean.
Supplied accessories
See “Supplied accessories” in “Getting started.”
Compatible with USB 2.0 Full Speed
Mass storage class
FAT16, FAT32
DC 5 V 500 mA
General
Speaker type:
Bass-Reflex type
Speaker unit:
9 cm (3–9/16 inches) x 2
Speaker impedance:
3Ω
Power requirements:
For USA and Canadian models
AC 120 V / 60 Hz
For European models
AC 230 V / 50 Hz
For Australian models
AC 240 V / 50 Hz
For other models
AC 110 V – 127 V / 220 V – 240 V
adjustable with voltage selector, 50/60 Hz
Power consumption:
35 W (at operation)
1.00 W or less (on standby)
Dimensions (approx.):
400 mm × 141 mm × 211 mm
(15–3/4 inches × 5–9/16 inches × 8–5/16 inches)
(W × H × D)
Mass (approx.):
3.3 kg (7.3 lbs)
❍ Supplied accessories
In this manual...
• The remote control buttons are used for explaining the
operations unless mentioned otherwise. However, if the
System has the same or similar button names, they can
also be used for the operations.
• “File” and “track” are used interchangeably.
• All the illustrations of the display used as examples are
from the European models.
Specifications
Thank you for purchasing a JVC product.
iPod model
ATTENTION: Aération correcte
Pour prévenir tout risque de décharge électrique ou d’incendie
et éviter toute détérioration, installez l’appareil de la manière
suivante:
1. Avant: Bien dégagé de tout objet.
2. Flancs/ Dessus/ Arrière: Aucun obstacle ne doit être
placé dans les zones indiquées par les dimensions dans
l’illustration.
3. Dessous: Posez l’appareil sur une surface plane et
horizontale. Veillez à ce que sa ventilation correcte puisse
se faire en le plaçant sur un support d’au moins dix
centimètres de hauter.
Getting started
Front view/Face
Fade muting
Sound Mode
To drop the volume in a moment
To select the sound mode suitable for your favorite
music.
\ The capacity of the USB mass storage class device is full.
\ The USB mass storage class device is write-protected.
• To restore the volume, press again or adjust the
volume.
Hyper Bass Sound (HBS)
• If the System does not work correctly, disconnect the AC power cord from the wall outlet, wait for a while, then
connect the cord again.
• JVC bears no responsibility for any loss of data in USB mass storage class device or iPod while using this System.
To reinforce the bass sound
HBS
POP
ROCK
JAZZ
CLASSIC
Canceled
(No indication)
Canceled
1
EN_RDN1[JCBUSAUX]REV_B_2nd.indd 1
10.7.28 0:56:57 PM
Presetting stations
Searching for stations
Basic operation
You can preset up to 20 FM stations.
While listening to a target station...
1
Remote sensor
1
STANDBY lamp
2
2
5V
1
PS (NO PS*)
• To select a number, see “How to select a number
using the remote control” in the bottom left of the
page.
Improving the reception
When an FM stereo broadcast is hard to listen...
Y
STANDB
3
ME
VOLU
2
Select a source.
(Other models) MONO
ST
• When the monaural mode (MONO) is activated, the
reception is improved. However, the stereo effect is lost.
• When the stereo mode (ST) is activated, you can listen
to the radio in stereo when a program is broadcast in
stereo.
3
MORY
USB ME
5V
ES
PHON
500mA
Adjust the volume.
IN
AUDIO
Tuning in to a preset station
• You can also use number buttons on the remote
control.
1
2
Headphones (not supplied)
1
DO NOT turn off the System with the volume set to an extremely high level; otherwise,
the sudden blast of sound may damage your hearing, speakers, and headphones when you
turn on the System or start playback.
PHON
ES
AUDIO
Stereo mini plug cord
(not supplied)
1
2
Select a PTY code.
3
Start searching.
When the System finds the one you have selected, that
station is tuned in.
• To stop searching, press PTY SEARCH.
• To search for another station, press PTY SEARCH while
the indications are flashing.
• If no program is found, “NO FOUND” appears.
Switching temporarily to a program of
your choice automatically (Europe only)
The Enhanced Other Networks function allows the
System to switch temporarily to a preset FM station
broadcasting a program of your choice (NEWS or INFO).
• This function works while listening to the FM station
providing the required signals.
INFO
2
(European model)
(RM-SRDN1R/RM-SRDN1WR)
3
iPod
Dock adaptor (supplied
with the iPod or sold
separately)
(Other models)
(RM-SRDN1A)
iPod
1
5V
2
While listening to a station...
Canceled
(No indication)
Playback operation
IN
RT (NO RT*)
NEWS
3
Stereo mini plug cord
(not supplied)
You can search for a program from the preset stations by
specifying PTY code.
While listening to the FM station...
2
Be sure to turn down
the volume before
connecting or putting
on the headphones.
PTY (NO PTY*)
Frequency
(No-radio Data System signal)
* Displayed if related signals are not sent by a station.
PS (Program
Commonly known station names.
Service)
PTY (Program
Types of broadcast programs.
Type)
RT (Radio Text) Text messages the station sends.
• When a Radio Data System signal is not received, the
frequency is displayed.
(European model)
CE
SOUR
Radio Data System allows FM stations to send an
additional signal along with their regular program
signals.
• If you want to know more about Radio Data System,
visit <http://www.rds.org.uk>.
To display the Radio Data System information
Preset number
Select a preset number.
The station search stops when a station of sufficient
signal strength is found.
• To manually stop the search, press 5 or ∞.
• When you press 5 or ∞ repeatedly, the frequency
changes step by step.
Turn on the power.
PTY search (Europe only)
(Hold)
(Hold)
FM radio
500mA
Receiving FM stations with Radio Data
System (Europe only)
500mA
Start playback of the external device.
Notes on iPod connection
• When detaching the dock adaptor from the dock,
pull up the dock adaptor with your fingernail or sharp
pointed tool using the slot.
Be careful not to injure your fingertips
or damage the terminal of the direct
dock.
• DO NOT connect or disconnect the iPod when the
System is turned on.
• Be sure to reduce the volume on the System to the
minimum level before connecting iPod. Adjust the
volume after starting playback.
• You cannot send any data to the iPod from the System.
• Do not carry the System with iPod connected. It might
cause damage to the dock or you might drop the iPod.
• Do not touch or hit the iPod terminal pins or connector
pins in the iPod dock directly. Doing so might cause
damage to the connector pins.
• iPod is charged through the dock when the System is
turned on.
Playback operations
iPod
* Information shown on the display differs depending
on the type of the iPod.
To play back/pause iPod
Press 6.
To select a track
Press ¢ or 4.
To fast-forward a track
Press and hold ¢.
To fast-reverse a track:
Press and hold 4.
To play back repeatedly
Press RPT/RND repeatedly.
To put iPod in sleep mode
Press and hold 6.
External
device
5V
Label side
500mA
EJECT
STAND
BY
E
VOLUM
Disc/USB
SOURC
E
ORY
USB MEM
5V
S
PHONE
AUDIO
500mA
IN
How to select a number
using the remote control
SOUND MODE
1
2
3
4
5
6
7
8
MORY
USB ME
5V
USB mass storage
class device
500mA
HBS
9
FADE MUTING
0
VOL
10
Prohibiting disc ejection
REMOTE CONTROL
Examples:
To select number 5, press 5.
To select number 20, press 10, 2, then
0 (when “- -” appears), or press 10, 0, 2,
then 0 (when “- - -” appears).
To select number 125, press 10, 1, 2,
then 5.
Notes on USB mass storage class device connection
• Connect a USB mass storage class device when the
System is turned off to prevent malfunction.
• Do not use a USB hub.
• When connecting with a USB cable, use a USB 2.0
cable whose length is less than 1 m (39–3/8 inches).
• The USB mass storage class device is charged through
the USB MEMORY terminal when “USB” is selected as
the source. (Some USB mass storage class devices may
not be charged through the USB MEMORY terminal
even if “USB” is selected as the source.)
• You cannot connect a computer to the USB MEMORY
terminal of the System.
• Electrostatic shock at connecting a USB mass storage
class device may cause abnormal playback of the
device. In this case, disconnect the USB mass storage
class device then reset the System and the USB mass
storage class device.
• While playing back or recording a file onto a USB mass
storage class device, do not disconnect the device.
Doing so may cause malfunction on both the System
and the device.
Repeat Play
Playback operations
During playback...
or
REPEAT1
Canceled
(No indication)
To open the disc tray
Press 0.
To play back/pause a disc or USB mass storage class
device
Press 6.
To select a track
Press ¢ or 4.
To fast-forward a track
Press and hold ¢.
To fast-reverse a track
Press and hold 4.
To select a group (MP3/WMA only)
Press 5 or ∞.
To stop playback
Press 7.
REPEAT 1
REPEAT
REPEAT GROUP
2
REPEAT GROUP
(MP3/WMA only)
Repeats the current track.
Repeats all tracks.
Repeats all tracks in the current group
(MP3/WMA only).
3
Select a track number (up to 32 tracks).
For audio CD:
For MP3/WMA:
(1) Select a group.
or
(2) Select a track.
2
Recording operations
Before you start recording
• It should be noted that it may be unlawful to
re-record pre-recorded tapes, records, or discs
without the consent of the owner of copyright for
the sound or video recording, broadcast or cable
program and for any literary, dramatic, musical, or
artistic work embodied therein.
The use of the files recorded on a USB device with
this System, except for personal use, is prohibited.
Transferring or selling the files you recorded
violates the copyright law and may subject you
to civil and criminal penalties for copyright
infringement.
• The volume and sound adjustments (see page 1) do
not affect recordings.
• Random Play and Repeat Mode are canceled during
recording.
• Tracks which are recorded onto a USB mass storage
class device will be converted into MP3 format (at a
sampling rate of 44.1 kHz and bit rate of 128 kbps.)
• Do not vibrate the System while recording tracks. It
may damage the recorded tracks.
• The System will automatically create the new group
as “CDREC01.”
• When playback ends, recording automatically stops.
• To stop recording manually, press 7.
• To record a single track, press RECORD twice during
playback of that track.
• To record programmed tracks, press RECORD twice
while Program Play is stopped.
Erasing a track
You can erase tracks on the USB mass storage class
device.
• Once the track is erased, you cannot resume it.
Before erasing...
Connect a USB mass storage class device to the USB
MEMORY (
) terminal.
1 Select USB as a source and start playback.
Recording from a Disc
REPEAT1
RANDOM
4
REPEAT GROUP
(MP3/WMA only)
Playback starts in a random order.
Random Play ends when all tracks have been played.
• You cannot select a track with the number buttons
during Random Play.
and
DISC UNLOCKED
• When you lock the disc tray, “DISC LOCKED” is scrolled
on the display. “DISC UNLOCKED” is scrolled on the
display when you unlock it.
You can record tracks from an Audio CD to a USB mass
storage class device.
REPEAT
Canceled
(No indication)
While the disc tray is closed...
(On the main unit)
DISC LOCKED
REPEAT
Random Play
1 Select a source and stop playback.
You can lock the disc tray so that no one can eject the
loaded disc.
(hold for 5 seconds
at the same time)
Program Play
1 Select a source and stop playback.
• To erase the entire program, press 7 repeatedly.
Before recording...
Connect a recordable USB mass storage class device to
) terminal.
the USB MEMORY (
1 Select CD as a source and stop playback.
2
Start recording.
2
Select a track you want to erase.
3
Erase the track.
(twice)
(twice)
2
EN_RDN1[JCBUSAUX]REV_B_2nd.indd 2
10.7.28 0:57:02 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising