FS & FA Series Beacon Tower Flasher Features:

FS & FA Series Beacon Tower Flasher Features:
Beacon Tower Flasher
FS & FA Series
B-KON Flashers have proven their reliability
through years of use on communication towers,
smoke stacks, cooling towers, tall buildings,
bridges and utility towers. The highest quality
components are encapsulated in a rugged plastic
housing with a molded-in heat transfer plate. The
flash rate, ratio, and fail-safe design meet FAA
regulations. Zero voltage switching can increase
lamp life up to ten times. The FS155-30RF &
FS165-30RF include superior RF filtering circuitry
for use in high RF installations; including AM hot
towers .
For more information see:
Appendix B, page 165, Figure 4 for dimensional drawing.
Appendix C, page 171, Figure 30 for connection diagram.
Operation
FS Series - Flasher (OFF First)
FA Series - Flashers & Aux. Modules
Upon application of input voltage, the T2 OFF time begins.
At the end of the OFF time, the T1 ON time begins and the
load energizes. At the end of T1, T2 begins and the load
de-energizes. This cycle repeats until voltage is removed.
Reset: Removing input voltage resets the output and the
sequence to T2 .
Features:
• Zero voltage switching - up to 10 times
longer lamp life
• No RFI caused by contacts closing
• High inrush capability - up to 200A
• RF model for AM hot towers & other high
RF installations
• Auxiliary units for synchronous flashing or
constant line loading
Approvals:
(FS155 & FA155 models only)
Auxiliary Products:
• Quick connect to screw adaptor:
P/N: P1015-18
• Female quick connect:
P/N: P1015-13 (AWG 10/12)
P/N: P1015-64 (AWG 14/16)
P/N: P1015-14 (AWG 18/22)
Available Models:
FA155
FA155-2
FA165
FA165-2
FS155-30RF
FS155-30T
FS165-30T
If desired part number is not listed, please call us to
see if it is technically possible to build .
Order Table:
Input
120VAC
120VAC
230VAC
230VAC
120VAC
120VAC
230VAC
120VAC
230VAC
Wattage
2500W
2500W
5000W
5000W
2500W
3000W
5000W
2500W
5000W
Inrush
200A
200A
200A
200A
200A
300A
200A
200A
200A
Description
For High RF Radiation locations including AM Hot Towers
Standard Flasher
For High RF Radiation locations including AM Hot Towers
Standard Flasher
Auxiliary unit for synchronous operating of additional beacons
Auxiliary unit with optical isolation between input and load contacts
Auxiliary unit for sychronous operating of additional beacons
Auxiliary unit to provide constant line loading
Auxiliary unit to provide constant line loading
Part Number
FS155-30RF
FS155-30T
FS165-30RF
FS165-30T
FA155-2
FA155-3
FA165-2
FA155
FA165
Specifications
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Single & multiple beacon flashing with
auxiliary modules
Flash Rate (FS Series Only) . . . . . . . . . . . . . . . . . . . 30 ±10 FPM
ON/OFF Ratio (FS Series Only) . . . . . . . . . . . . . . . 50 - 67% ON time; 33 - 50% OFF time
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 120 or 230VAC ±20%
AC Line Frequency . . . . . . . . . . . . . . . . . . . . . . . . . 50/60Hz
Output Rating (Zero Voltage Switching) . . . . . . . 2500W @ 120VAC; 5000W @ 230VAC
Inrush Current . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 200A peak for 1 cycle of AC line
Mounting* . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mount with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 2 x 1.51 in. (50.8 x 50.8 x 38.4 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connect terminals
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Operating / Storage Temperature . . . . . . . . . . . . -40° to 65°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 3.9 oz (111 g)
* Note: Must be mounted to metal surface using the included heat sink compound. The
maximum mounting surface temperature is 90°C.
www.ssac.com • 800-843-8848 • fax: 605-348-5685
137
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement