FS500 / AF Series Flashers Features:
Flashers
FS500 / AF Series
The FS500 Series flash rate is adjustable from 10 to
100 FPM. A locknut is provided to hold selected
flash rate. The long-life electronic circuit combined
with a quality electromechanical relay provides
flexibility and reliability in most applications.
Operation
Upon application of input voltage, the output relay is
energized and the ON time begins. At the end of the ON
time, the output relay de-energizes and the OFF time
begins. At the end of the OFF time, the output is energized
and the cycle repeats as long as input voltage is applied.
Reset: Removing input voltage resets the output and
the sequence.
Order Table:
Input Voltage
12VDC
24VAC/DC
120VAC/DC
230VAC
Part Number
Specifications
FS512
FS524
FS590
FS599
For more information see:
Appendix A, page 164 for Flasher (ON First-DPDT)
function.
Appendix B, page 165, Figure 9 for dimensional drawing.
Appendix C, page 168, Figure 8 for connection diagram.
Technical Data
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . .ON/OFF recycling flasher with adjustable flash rate
Flash Rate . . . . . . . . . . . . . . . . . . . . . . . . . . .Adjustable from 10 - 100 operations per minute
(guaranteed range)
ON/OFF Ratio . . . . . . . . . . . . . . . . . . . . . . .≅ 50%
Input
Input Voltage . . . . . . . . . . . . . . . . . . . . . . . .12VDC, 24VAC/DC, 120VAC/DC, 230VAC
Tolerance
12VDC & 24VDC/AC . . . .-15% - 20%
120 - 230VAC/DC . . . .-20% - 10%
AC Line Frequency . . . . . . . . . . . . . . . . . . .50/60Hz
Output
Load Type . . . . . . . . . . . . . . . . . . . . . . . . . . .Electromechanical relay
Order Table:
AF
X
Input Voltage
─1 - 24VAC
─2 - 120VAC
─3 - 230VAC
X
Output Rating
─1 - 6A
─2 - 10A
─3 - 20A
Features:
• Solid-state circuitry - relay output
• Industrial standard octal plug-in
• Adjustable flash rate 10 - 100 FPM
• 10A, DPDT output contacts
Approvals:
(some models)
Auxiliary Products:
• Panel mount kit: P/N: BZ1
• Octal 8-pin socket: P/N: NDS-8
• Hold-down clips (sold in pairs):
P/N: PSC8 (NDS-8)
• DIN rail: P/N: C103PM (Al)
Available Models:
FS512
FS524
FS590
If desired part number is not listed, please call us to
see if it is technically possible to build .
Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DPDT
Rating . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10A resistive @ 120/240VAC & 28VDC;
1/3 hp @ 120/ 240VAC
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . .Plug-in socket
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . .3.62 x 2.39 x 1.78 in. (91.6 x 60.7 x 45.2 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . .Octal 8-pin plug-in
Protection
Isolation Voltage . . . . . . . . . . . . . . . . . . . . . .> 1500V RMS input to output
Polarity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .DC units are reverse polarity protected
Environmental
Operating / Storage Temperature . . . . . . .-20° to 60°C / -30° to 85°C
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≅ 5.8 oz (164 g)
The AF Series offers a high inrush capacity of up
to 200A. These devices exceed mechanical type
relays in both performance and lifespan. The AF
Series is constructed with no moving parts to arc,
wear, and eventually fail; 100 million operations
are typical. Circuitry is encapsulated to provide
protection against vibration and moisture, making
the AF Series ideal for outdoor applications.
Features:
Operation
Upon application of input voltage T1 begins, Load 1 is
ON and Load 2 is OFF. At the end of T1, T2 begins and
Load 2 is now ON and Load 1 is OFF. At the end of T2,
T1 repeats and this sequence continues until input voltage
is removed. The duration of T1 and T2 is approximately
equal .
Reset: Removing input voltage resets the flasher.
Auxiliary Products:
For more information see:
Appendix A, page 164 for Flasher (Alternating) function.
Appendix B, page 166, Figure 13 for dimensional drawing.
Appendix C, page 168, Figure 7 for connection diagram.
X
FlashRate(flashespermin.)
─1 - 10
─2 - 30
─3 - 60
─4 - 90
─5 - 120
─6 - 140
─Blank - Custom Flash Rate
• Alternately flashes two high current loads
• High surge capacity - up to 200A
• Small size - 2 x 2 x 1.30 in.
(50.8 x 50.8 x 33 mm)
• Totally solid state & encapsulated
• Female quick connect:
P/N: P1015-13 (AWG 10/12)
P/N: P1015-64 (AWG 14/16)
P/N: P1015-14 (AWG 18/22)
• Quick connect to screw adaptor:
P/N: P1015-18
Available Models:
AF213
AF223
AF232
AF233
If desired part number is not listed, please call us to
see if it is technically possible to build .
Specifications
Technical Data
Operation . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Alternating solid-state flasher rated (continuous duty)
Flash Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . .Factory fixed at 10, 30, 60, 90, 120, or 140 flashes
per min. ±10%.
Custom Flash Rate . . . . . . . . . . . . . . . . . . . .10 - 140 FPM
Ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≅ 50%
Input
Input Voltage/Frequency . . . . . . . . . . . . . .24, 120, or 230VAC ±15% / 50/60Hz
Output
Load Type . . . . . . . . . . . . . . . . . . . . . . . . . . . .Incandescent or resistive
Maximum Load Rating . . . . . . . . . . . . . . . . .6, 10, & 20A steady state
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Inrush . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 times steady state current
Mechanical
Mounting * . . . . . . . . . . . . . . . . . . . . . . . . . . .Surface mount with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . .2 x 2 x 1.30 in. (50.8 x 50.8 x 33 mm)
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Encapsulated
Environmental
Operating / Storage Temperature . . . . . . . .-20° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≅ 2.9 oz (82 g)
*Must be bolted to metal surface using the included heat sink compound. The maxim
mounting surface temperature is 90°C.
107
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement