KSDU/ TDU Series Timer - Delay-on-Make Features:

KSDU/ TDU Series Timer - Delay-on-Make Features:
Timer - Delay-on-Make
KSDU/ TDU Series
The TDU and KSDU Series are encapsulated solidstate, delay-on-make timers that combine digital
timing circuitry with universal voltage operation.
The TDU offers DIP switch adjustment allowing
accurate selection of the time delay over the full
time delay range. The KSDU is factory fixed from
0.1s to 10,230s and does not include the DIP switch.
These series are excellent choices for process
control systems and OEM equipment .
Operation (Delay-on-Make):
Upon application of input voltage, the time delay begins.
The output is de-energized before and during the time
delay. At the end of the time delay, the output energizes
and remains energized until input voltage is removed.
Reset: Removing input voltage resets the time delay
and output .
For more information see:
Appendix A, pages 156-164 for function descriptions
and diagrams .
Appendix B, page 165, Figure 1 for dimensional drawing.
Connection:
L1
N/L2
Digi-Set Binary Switch Operation:
Features:
• 2 universal voltage ranges from
24 to 240VAC/DC
• Digital integrated circuitry
• Switch selectable delays from 0.1s - 2.8h in 3
ranges or factory fixed
• ±0.5% repeat accuracy
• 1A steady, 10A inrush
• Totally solid state & encapsulated
Approvals:
Auxiliary Products:
• Female quick connect:
P/N: P1015-64 (AWG 14/16)
• Quick connect t o s crew ad aptor:
P/N: P1015-18
• Mounting bracket: P/N: P1023-6
• DIN rail: P/N: C103PM (Al)
• DIN rail adaptor: P/N: P1023-20
Available Models:
KSDU8110
KSDU811200
TDU3000A
TDU3001A
TDU3003A
TDUH3000A
TDUH3001A
TDUL3000A
TDUL3001A
If desired part number is not listed, please call us to
see if it is technically possible to build .
Load may be connected to terminal 3 or 1.
TDU has DIP switch adjustment; KSDU is fixed.
Order Tables:
KSDU
X
Input Voltage Range
─8 - 24 to 120VAC/DC
─9 - 100 to 240VAC/DC
TDU
Input Voltage Range
24 to 120VAC/DC
100 to 240VAC/DC
24 to 120VAC/DC
100 to 240VAC/DC
120 to 277VAC
24 to 120VAC/DC
100 to 240VAC/DC
X
Type
─1 - Fixed
X
Time Delay (Seconds)
─Specify fixed delay in
seconds 0 .1 - 10230
Time Range - Seconds
0.1 - 102.3
0.1 - 102.3
1 - 1023
1 - 1023
1 - 1023
10 - 10230
10 - 10230
Part Number
TDUL3000A
TDUL3001A
TDU3000A
TDU3001A
TDU3003A
TDUH3000A
TDUH3001A
Specifications
Time Delay
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Digital integrated circuitry
Range*
Adjustable (TDU) . . . . . 0.1 - 102.3s in 0.1s increments
1 - 1023s in 1s increments
10 - 10230s in 10s increments
Fixed (KSDU) . . . . . Fixed from 0.1s - 10230s
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . ±0.5% or 20ms, whichever is greater
Tolerance (Factory Calibration) . . . . . . . . . . . . ±10%
Recycle Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≤ 150ms
Time Delay vs Temp. & Voltage . . . . . . . . . . . ±5%
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24 to 120VAC/DC; 100 to 240VAC/DC
AC Line Frequency . . . . . . . . . . . . . . . . . . . . . . 50/60 Hz
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ±20%
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Solid state
Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . NO, open during timing
Maximum Load Current . . . . . . . . . . . . . . . . . . 1A steady state, 10A inrush at 60°C
28
Minimum Holding Current . . . . . . . . . . . . . . . 40mA
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 2.5V @ 1A
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Encapsulated
Dielectric Breakdown . . . . . . . . . . . . . . . . . . . . ≥ 2000V RMS terminals to mounting surface
Insulation Resistance . . . . . . . . . . . . . . . . . . . . . ≥100 MΩ
Mechanical
Mounting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Surface mount with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 x 2 x 1.21 in. (50.8 x 50.8 x 30.7 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.25 in. (6.35 mm) male quick connect terminals
Environmental
Operating / Storage Temperature . . . . . . . . . . -40° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . ≅ 2.4 oz (68 g)
* For CE approved applications, power must be removed from the unit when a switch position
is changed.
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement