TH2 Series Timer - Interval Features

Timer - Interval
TH2 Series
The TH2 is the combination of a timer and a solidstate relay into one easy-to-use solid-state molded
module. When mounted to a metal surface, the
TH2 Series can switch load currents up to 20A
steady state with 200A inrush. The TH2 replaces
a timer and relay at a competitive price.
Operation (Interval):
Upon application of input voltage, the time delay begins.
The output energizes during the time delay. At the end
of the time delay, the output de-energizes and remains
de-energized until input voltage is removed.
Reset: Removing input voltage resets the time delay
and output .
Connection:
L1
For more information see:
Appendix A, pages 156-164 for function descriptions
and diagrams .
Appendix B, page 165, Figure 4 for dimensional drawing.
N/L2
Features
• High load current capacity up to 20A, 200A
inrush
• Fixed or adjustable time delays from 0.1 600s in 4 ranges
• ±2% repeat accuracy
• ±5% factory calibration
• Metallized mounting surface for heat transfer
• Solid state & encapsulated
Approvals:
Auxiliary Products:
• External ad just potentiometer:
P/N: P1004-95
P/N: P1004-95-X
• Female quick connect:
P/N: P1015-13 (AWG 10/12)
P/N: P1015-64 (AWG 14/16)
• Quick connect t o s crew ad aptor:
P/N: P1015-18
• Versa-knob: P/N: P0700-7
Available Models:
TH2A421
If desired part number is not listed, please call us to
see if it is technically possible to build .
RT is used when external adjustment is ordered.
Order Table:
TH2
X
Output Rating
─A - 6A
─B - 10A
─C - 20A
X
Input Voltage
─2 - 24VAC
─4 - 120VAC
─6 - 230VAC
X
Adjustment
─1 - Fixed
─2 - External adjust
─3 - Onboard adjust
X
Time Delay*
─1 - 0.1 - 3s
─2 - 0.5 - 60s
─3 - 2 - 180s
─4 - 5 - 600s
*If fixed delay is selected, insert
delay (0 .1 - 600) in seconds .
Specifications
Time Delay
Range . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.1s - 600s in 4 adjustable ranges, or fixed
Repeat Accuracy . . . . . . . . . . . . . . . . . . . . . . . . . . .±2% or 20ms, whichever is greater
Tolerance (Factory Calibration) . . . . . . . . . . . . . . .≤ ±5%
Time Delay vs Temp. & Voltage . . . . . . . . . . . . . .≤ ±10%
Reset Time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≤ 150ms
Input
Voltage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .24, 120, or 230VAC
Tolerance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .±15%
AC Line Frequency . . . . . . . . . . . . . . . . . . . . . . . . .50/60 Hz
Power Consumption . . . . . . . . . . . . . . . . . . . . . . . .≤ 2VA
Output
Type . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Solid state
Form . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .NO, closed during timing
Maximum Load Currents
Output
Steady State
Inrush**
A
6A
60A
B
10A
100A
C
20A
200A
78
Minimum Load Current . . . . . . . . . . . . . . . . . . . . .100mA
Voltage Drop . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≅ 2.5V at rated current
OFF State Leakage Current . . . . . . . . . . . . . . . . . .≅ 5mA @ 230VAC
Protection
Circuitry . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Encapsulated
Dielectric Breakdown . . . . . . . . . . . . . . . . . . . . . . .≥ 2000V RMS terminals to mounting surface
Insulation Resistance . . . . . . . . . . . . . . . . . . . . . . . .≥ 100 MΩ
Mechanical
Mounting ** . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .Surface mount with one #10 (M5 x 0.8) screw
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 x 2 x 1.51 in. (50.8 x 50.8 x 38.4 mm)
Termination . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .0.25 in. (6.35 mm) male quick connect terminals
Environmental
Operating / Storage Temperature . . . . . . . . . . . .-20° to 60°C / -40° to 85°C
Humidity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .95% relative, non-condensing
Weight . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .≅ 3.9 oz (111 g)
**Must be bolted to a metal surface using the included heat sink compound. The maximum
mounting surface temperature is 90°C. Inrush: Non-repetitive for 16ms.
www.ssac.com • 800-843-8848 • fax: 605-348-5685
Courtesy of Steven Engineering, Inc.-230 Ryan Way, South San Francisco, CA 94080-6370-Main Office: (650) 588-9200-Outside Local Area: (800) 258-9200-www.stevenengineering.com

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project