Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors Hubbell SystemOne Poke-Through Complies with UL514A Features 4-Inch Core Through Floor Fittings Step down installation clips allow the fitting to be installed or removed from the floor above Fire barrier expands during fire conditions to maintain the floor’s fire rating Adjustable lower fire barrier accommodates concrete floor thicknesses from 2¼ to 7 in. Excellent solution for retrofit and new construction Delivers power, voice, data and multimedia UL listed for use in 1 – 4 hour fire rated floors at 100% rated fill Available with integral power junction box SystemOne Fire-Rated Poke-Throughs are approved for use in the City of Chicago Oversized E.M.T. conduit tubes for increased cable capacity UL installation spacing - minimum 2 feet on center, not more than one per 65 square feet of floor area in each span Features Universal Flange and Cover Assembly Carpet Tile Hinged doors open 180 degrees flush to the carpet flange or tile Locking studs allow each door to be secured independently The universal carpet or tile flange can be used for Hubbell SystemOne FireRated Poke-Throughs and Floor Boxes Finishes and colors available: Aluminum Finish Hubbell SystemOne – 4-Inch Core Hole Accepts all Hubbell SystemOne covers and sub-plates Brass Finish Black Gray Ivory Durable cast aluminum construction available in black, gray, brass, aluminum and ivory powder coat finishes Features ScrubShield® technology that exceeds UL514 scrub water exclusion requirements Provides consistent look and maximum functionality throughout the installed life Meets ADA standards for accessible design, section 4.3.8 Features Hubbell SystemOne Sub-Plates Hubbell’s modular sub-plate design allows users to economically upgrade Hubbell SystemOne FRPT and Floor Boxes to accommodate future moves, adds and changes. See page M-7 for complete offering. Durable cast aluminum construction, powder coat finish Hubbell 4X4: four 20A, 125V receptacles, four keystone openings for voice/data jacks and flush multimedia connectors Hubbell X-END™ and Hubbell iSTATION™ modular connectivity 4x4 Sub-Plate Datacom and Power Sub-Plate Extron® APP/MAPP and Power Sub-Plate Accommodates Extron® Electronics Architectural Series audio/video system integration products Accommodates GFCI, surge and standard Style Line® Decorator receptacles Twist-Lock® receptacle with two flush keystone openings Dual Style Line® Decorator Sub-Plate Twist-Lock® Sub-Plate Furniture Feed Cover, Carpet Extron® is a registered trademark of Extron Electronics. Siemon™ is a trademark of The Siemon Company. Panduitt® is a registered trademark of Panduit Corp. SYSTIMAX X® is a registered trademark of CommScope, Inc. Ortronics® is a registered trademark of Ortronics/Legrand. M-4 www.hubbell-wiring.com Large capacity and multi-service furniture feed applications Open system sub-plates permit maximum data flexibility Dimensions in Inches (mm) &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Hubbell SystemOne 4-Inch Core Hole, One-Piece Units Complies with UL514A Hubbell SystemOne 4-Inch Core Hole – One-Piece Units All Hubbell SystemOne 4-inch core, one-piece units include the sub-plate and cover to simplify your order and reduce installation time. Units are also available with a power junction box installed. The junction box is also available for purchase separately. Color Catalog Number without Junction Box Catalog Number with Junction Box* One-Piece 4X4 Poke-Through Assembled-unit includes: Hubbell SystemOne 4X4 floor fitting (S1PT4X4FIT) 4x4 sub-plate (S1SP4X4) Finish flange and universal carpet cover assembly (S1CFCxx) 4-hour fire classification Keystone openings accept Hubbell modular jacks, X-END™ connectors and flush multimedia Snap Fit connectors. Receptacles feature single or two circuit wiring and isolated ground capability. Aluminum Finish Brass Finish Black/Brass Finish Black Gray S1PT4X4AL S1PT4X4BRS S1PT4X4BRS3 S1PT4X4BL S1PT4X4GY S1PT4X4ALJ S1PT4X4BRSJ S1PT4X4BRS3J S1PT4X4BLJ S1PT4X4GYJ One-Piece Dual Style Line® Decorator Poke-Through Assembled-unit includes: Hubbell SystemOne dual channel floor fitting (S1PTFIT) Dual Style Line® Decorator opening sub-plate (S1SP) Finish flange and universal carpet cover assembly (S1CFCxx) 4-hour fire classification Aluminum Finish Brass Finish Black Gray S1PTAL S1PTBRS S1PTBL S1PTGY S1PTALJ S1PTBRSJ S1PTBLJ S1PTGYJ Aluminum Finish Brass Finish Black Gray S1PT3IMAL S1PT3IMBRS S1PT3IMBL S1PT3IMGY S1PT3IMALJ S1PT3IMBRSJ S1PT3IMBLJ S1PT3IMGYJ Aluminum Finish Brass Finish Black Gray S1PTFFAL S1PTFFBRS S1PTFFBL S1PTFFGY S1PTFFALJ S1PTFFBRSJ S1PTFFBLJ S1PTFFGYJ Hubbell SystemOne FRPT – 4-Inch One-Piece Units Description Style Line® Decorator openings accept two Style Line® Decorator or one surge or GFCI receptacle and one Style Line® Decorator receptacle. Outlet frames can be used to convert the application to a 6-port multi-service or a 12-port all communication solution. Fitting is 4-hr rated at 100% fill to accommodate (12) Cat 6A cables (0.330" diameter). One-Piece Modular A/V Poke-Through Assembled-unit includes: Hubbell SystemOne A/V floor fitting (S1PTAVFIT) 20A, 125V power and 3-unit Hubbell iSTATION™ sub-plate (S1SP3IM) Finish flange and universal carpet cover assembly (S1CFCxx) 4-hour fire classification The Hubbell iSTATION™’s recessed opening can accommodate data/voice/audio and video solutions including15-pin VGA, RCA, S-Video, 3.5mm stereo, X-END™, HDMI and XLR microphone jacks. One-Piece Furniture Feed Poke-Through Assembled-unit includes: Hubbell SystemOne A/V floor fitting (S1PTAVFIT) Hubbell SystemOne Furniture Feed Cover Plate (S1SPFFxx) 4-hour fire classification This solution provides one ¾ in. conduit for power and one 1½ in. conduit for low-voltage. Furnished with two screw-in flexible metal conduit connectors. Note: * Junction box factory installed on through floor fitting. See pages M-14 to M-17 for technical information. Dimensions in Inches (mm) www.hubbell-wiring.com Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors M-5 &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Fire-Rated Poke-Throughs for Concrete Floors Hubbell SystemOne 4-Inch Core Through Floor Fittings Fire-Rated Poke-Throughs for Concrete Floors Hubbell SystemOne 4-Inch Core Through Floor Fittings Complies with UL514A Hubbell SystemOne 4-Inch Core – Three-Piece Units Catalog Number without Junction Box Catalog Number with Junction Box* 4X4 Through Floor Fitting Through floor fitting with two ¾ in. E.M.T. for communications and one ¾ in. E.M.T. for power. For use with Hubbell SystemOne Universal Covers and S1SP4X4 and S1SPTL series sub-plates only. Universal cover and sub-plate ordered separately. 4-hour fire classification. S1PT4X4FIT S1PT4X4FITJ Dual Channel Through Floor Fitting Through floor fitting with two 1 in. E.M.T. conduit stems to feed power and/or communication services. For use with Hubbell SystemOne universal covers and all Hubbell sub-plates except S1SP4X4 and S1SPTL series. Universal cover and sub-plate ordered separately. 4-hour fire classification. S1PTFIT S1PTFITJ A/V Through Floor Fitting Through floor fitting with one ¾ in. E.M.T. conduit stem for power and one 1½ in. E.M.T. conduit stem for communication services. Ideal for demanding, high capacity audio/video and data requirements. For use with Hubbell SystemOne universal covers and all Hubbell sub-plates except S1SP4X4 and S1SPTL series. Universal cover and sub-plate ordered separately. 4-hour fire classification. S1PTAVFIT S1PTAVFITJ Description Note: * Junction box factory installed on through floor fitting. See pages M-14 to M-16 for technical information. Hubbell SystemOne Universal Cover Poke Through Accessories Cast aluminum construction Description Durable powder coat finish Color Carpet Tile Aluminum Finish Brass Finish Black Gray Ivory S1CFCAL S1CFCBRS S1CFCBL S1CFCGY S1CFCI S1TFCAL S1TFCBRS S1TFCBL S1TFCGY S1TFCI Aluminum Finish M-6 Brass Finish Black Catalog Number Abandonment Plates Used to cover abandoned SystemOne Fire-Rated Poke-Throughs or Floor Boxes. Gray Ivory Fire-Rated Closure Plug Used to seal a 4-inch core hole when the FRPT is no longer required and the throughfloor fitting is removed. Maintains the floor’s 1–4 hour fire rating. Power Junction Box For use with SystemOne Fire-Rated PokeThroughs. Provides 27.0 cubic inches. (1) ¾ and (1) 1" E.M.T. connector supplied. Trade size knockouts: Top (1) 1 inch Bottom (1) ¾ inch Sides (2) ½ inch (1) ¾ inch www.hubbell-wiring.com Black Gray S1AP4BL S1AP4GY Black Gray S1FRP4BL S1FRP4GY S1FRPTJB Dimensions in Inches (mm) &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Hubbell SystemOne Sub-Plates† Description Catalog Number Complies with UL514A Description Catalog Number Duplex/Duplex (2) Duplex openings for power and/or datacom applications. Style Line® Decorator/GFCI (2) Style Line® Decorator openings for power and/or datacom applications. S1SP Hubbell 4 X 4 (4) 20A, 125V receptacles. (4) Keystone openings for Hubbell jacks or flush A/V connectors. Power can be wired as single or two circuit with isolated ground capability. 24" wire leads. Provided with 15 ft. wire leads Provided with 30 ft. wire leads S1SPDUSL Tile Furniture Feed Cover/Flange* (1) ¾" and (1) 1½" N.P.T. access holes for power and/or datacom applications. Universal Cover not required. Includes tile flange. Carpet Furniture Feed Cover/Flange* (1) ¾" and (1) 1½" N.P.T. access holes for power and/or datacom applications. Universal Cover not required. Includes carpet flange. S1SPFFAL S1SPFFBRS S1SPFFBL S1SPFFGY Aluminum Fin. Brass Fin. Black Gray S1SP4X415 S1SP4X430 Hubbell DataCom + Power (1) 20A, 125V receptacle and 3-unit recessed Hubbell iSTATION™ opening for data, voice, and A/V applications. S1SPTL Hubbell DataCom + Style Line® Decorator (1) Style Line® Decorator opening, (2) flush Keystone openings and 1.5 unit recessed Hubbell S1SPSL2IM iSTATION™ opening for data, voice and A/V applications. Hubbell DataCom 1 unit flush Hubbell iSTATION™ opening and 3-unit recessed Hubbell iSTATION™ opening for data, voice, and A/V applications. Extron® or FSR + Power (1) 20A, 125V receptacle. Recessed opening for (3) single Extron® MAAP series adapter plates or FSR IPS plates. Extron® or FSR + Power (1) 20A, 125V receptacle. Recessed opening for (1) single Extron® MAAP and (2) single AAP series adapter plates or FSR IPS plates. Extron® AAP + Power (1) 20A, 125V receptacle. (2) flush Keystone and recessed opening for (2) single Extron® AAP Series adapter plates. Catalog Number S1SPDU S1SP4X4 Single Receptacle + Data Opening for 20 or 30A TwistLock® receptacle (1.56" OD) and (2) Keystone openings for Hubbell jacks or flush A/V connectors. Description Duplex/Style Line® Decorator (1) Duplex and (1) Style Line® Decorator opening for power and/or datacom applications. S1SPEXT1 S1SP3IM S1SP4IM S1SPEXT2 Ortronics Series II® + Power (1) 20A, 125V receptacle. Recessed opening for (3) 1 unit Ortronics Series II® modules. Hubbell DataCom + Duplex (1) Duplex opening, (2) flush Keystone openings and 1.5 unit recessed Hubbell iSTATION™ opening for data, voice and A/V applications. S1SPDU2IM Active Multimedia + Power Single 20A, 125V receptacle; (2) flush Keystone openings; (1) rectangular Style Line® Decorator opening to accommodate active multimedia modules or low voltage S1SPAMM20 outlet frames. Extron® or FSR Single-Service Recessed opening for (2) single Extron® MAAP and (2) single AAP series adapter plates or FSR IPS plates. S1SPEXT3 S1SPTRAC S1SPORT Siemon MAX® + Power (1) 20A, 125V receptacle. Recessed bezel for (6) Siemon MAX® modules. S1SP4X4SYS S1SPMAX Note: * Furnished with two screw-in flexible metal conduit connectors. See section P for complete offering of Hubbell jacks and frames. † See page M-8 for FRPT Configuration Chart. Sub-Plate Accessories Description Replacement Threaded Conduit Plugs Used with S1SPFFx and S1SPFFTx ONLY. Sub-plate is supplied with plugs. Color 1½" Plug ¾" Plug Aluminum Finish Brass Finish Black Gray S1FP15AL S1FP15BRS S1FP15BL S1FP15GY S1FP34AL S1FP34BRS S1FP34BL S1FP34GY Description Catalog Number 6-Port Replacement Data Frames Used with open systems sub-plates. Sub-plate is supplied with data frame. Siemon MAX® for use with S1SPMAX sub-plate. Ortronics TracJack® for use with S1SPTRAC sub-plate. S1DFMAX Black Style Line® blank frame. 2100BK S1DFTRAC Extron® is a registered trademark of Extron Electronics. MAX X® is a registered trademark of The Siemon Company. Mini-Com® and Panduitt® are registered trademarks of Panduit Corp. SYSTIMAX X® is a registered trademark of CommScope, Inc. TracJackk®, Series III® & Ortronics® are registered trademarks of Ortronics/Legrand. Dimensions in Inches (mm) www.hubbell-wiring.com Hubbell SystemOne Sub-Plates SYSTIMAX® 4 X 4 (4) 20A, 125V receptacles. (4) Openings for SYSTIMAX® Connectivity. S1SP4X4PA S1SPFFTAL S1SPFFTBRS S1SPFFTBL S1SPFFTGY Ortronics TracJack® + Power (1) 20A, 125V receptacle. Recessed bezel for (6) Ortronics TracJack® modules. S1SPEXT4 Panduit Mini Com® 4 X 4 (4) 20A, 125V receptacles. (4) Openings for Panduit Mini-Com Connectivity. Aluminum Fin. Brass Fin. Black Gray Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors M-7 &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors )VCCFMM4ZTUFN0OF$POßHVSBUJPO$IBSU Approved for use in the City of Chicago. (except S1PFB) Sub-Plates S1SP Floor Boxes* 4" Core Hole Fire-Rated Poke-Throughs Metal Non-Metallic S1PFB S1CFB S1SFB S1SFBAV 3 3.5 3.5 3.5 S1PTFIT (Single-Service) S1SPDU Duplex/Duplex 3 3.5 3.5 3.5 (Single-Service) S1SPDUSL Duplex/Style Line® Decorator 3 3.5 3.5 3.5 (Single-Service) S1PT4X4FIT S1PTAVFIT (Multi-Service) (Multi-Service) (Multi-Service) S1SP4X4 S1SP4X4PA S1SP4X4SYS S1SPTL Hubbell 4 X 4 Panduit Mini-Com® 4 X 4 SYSTIMAX® 4 X 4 4 4 4 4 Twist-Lock® Receptacle + Data 4 4 4 4 S1SP3IM Hubbell DataCom + Power 5 5 5 5 S1SP4IM Hubbell DataCom 3.5 3.5 3.5 3.5 S1SPDU2IM Hubbell DataCom + Duplex 5 5 5 5 S1SPSL2IM Hubbell DataCom + Style Line® Decorator 5 5 5 5 S1SPFFxx (Carpet) S1SPFFTxx (Tile) Furniture Feed Cover/ Flange (Replace “x” with BRS (brass finish), AL (aluminum finish), BL (black) or GY (gray). Extron® MAAP + Power 3 3.5 3.5 3.5 4 4 4 4 4 4 4 4 4.5 4.5 4.5 4.5 S1SPEXT1 Hubbell SystemOne Configuration Chart Style Line® Decorator/GFCI Complies with UL514A S1SPEXT2 Extron AAP/MAAP + Power S1SPEXT3 Extron Datacom S1SPEXT4 Extron AAP + Flush Keystone + Power 4 4 4 4 S1SPORT Ortronics Series II + Power 5 5 5 5 S1SPTRAC Ortronics TracJack + Power 5 5 5 5 S1SPMAX Siemon MAX + Power 5 5 5 5 5 5 5 5 ® ® ® ® S1SPAMM20 Active Multimedia + Flush Keystone + Power S1CFCxx SystemOne Carpet Cover S1TFCxx SystemOne Tile Cover M-8 SystemOne Floor Boxes and FRPTs use SystemOne Universal Covers (Replace “x” with BRS (brass finish), AL (aluminum finish), BL (black), GY (gray) or I (ivory). Signifies minimum depth of concrete pour in inches for Hubbell SystemOne Floor Boxes. Recommended Floor Fitting Alternative Floor Fitting Not Compatible Note: *See section L for product information. Extron® is a registered trademark of Extron Electronics. MAX® is a registered trademark of The Siemon Company. Mini-Com® and Panduit® are registered trademarks of Panduit Corp. SYSTIMAX® is a registered trademark of CommScope, Inc. TracJack®, Series II® & Ortronics® are registered trademarks of Ortronics/Legrand. www.hubbell-wiring.com Dimensions in Inches (mm) &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors Hubbell SystemOne 4X4 Series FRPT Complies with UL514A Technical Information S1PT4X4 Series Ø 8.00" (203.2) 2.80" (71.1) Ø 3.88" (98.6) 0.55" (14.0) 2.29" (58.2) Adjustable lower fire barrier Gasket ¾" E.M.T. 1.05" (26.7) 12.54" (318.5) Product Information • • • • • • Powder coat cast aluminum cover and flange (color finish options: aluminum, brass, black, gray and ivory). Hubbell SystemOne universal cover meets ADA standards for accessible design, section 4.3.8, "changes in level." S1SP4X4 subplate supplied with pre-wired, molded, four position 20A, 125V, black receptacle, NEMA 5-20R. Wired with six thermally protected #14 AWG THHN stranded copper conductors. Copper Cross Sectional Receptacle can be wired as dual-circuit and isolated ground. Wire Size Area for Solid or Stranded Accepts four (4) Hubbell HXJ6, HXJ5E, HXJU; category 6, 5e, and USOC, and (AWG) Conductors flush series jacks. #24 .00032 sq. in. (.206mm2) Application Data #22 .00050 sq. in. (.322mm2) • • • • #14 .00323 sq. in. (2.083mm2) #12 .00512 sq. in. (3.303mm2) #10 .00815 sq. in. (5.258mm2) #8 .01296 sq. in. (8.361mm2) Mounted in 4 in. (76.2) cored concrete diameter through hole. Floor thickness range: 2¼ to 7 in. (57.2 to 177.8). UL Listed for fire resistance in 1 – 4 hour rated D900 series floors. Approved for use in the City of Chicago. UL Listed Low Voltage Wiring Capacity Technical Information Fire Resistance Rating 4-Hrs. (D900) Max. Copper Cross Section ¾ in. Power E.M.T ¾ in. Low Voltage E.M.T .0307 sq. in. .016 sq. in. Note: When connecting conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables. UL Characteristics Listing UL File Number Outlet Box E31999 Fire Resistance R8429 For use in 1, 1½, 2, 3 or 4 hour rated unprotected reinforced floors or in 1, 2, or 3 hour rated floors employing steel floor units and concrete topping (D900 Series designs). UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of floor area in each span. Note: The above product data pertains to both one-piece units and through-floor fittings. M-14 www.hubbell-wiring.com Dimensions in Inches (mm) &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Hubbell SystemOne Dual-Channel FRPT Complies with UL514A Technical Information S1PT Series Ø 8.00" (203.2) 3.86" (98.0) Ø 3.88" (98.6) 0.55" (14.0) Adjustable lower fire barrier 0.67" (17.0) 0.93" (23.6) Gasket 1" E.M.T. 1.06" (26.9) 13.59" (345.2) Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors 15.59" (396.0) Product Information • Powder coat cast aluminum cover and flange (color finish options: aluminum, brass, black, gray and ivory). • S1SP subplate accepts two (2) 15A or 20A Style Line Decorator Receptacles, Style Line Data frames, and/or one (1) GFCI or surge receptacle. • Hubbell SystemOne universal cover meets ADA standards for accessible design, Copper Cross Sectional Wire Size Area for Solid or Stranded section 4.3.8, "changes in level." (AWG) Application Data • • • • Mounted in 4 in. (76.2) cored concrete diameter through hole. Floor thickness range: 2¼ in. to 7 in. (57.2 to 177.8). UL Listed for fire resistance in 1 – 4 hour rated D900 series floors. Approved for use in the City of Chicago. Conductors #24 .00032 sq. in. (.206mm2) #22 .00050 sq. in. (.322mm2) #14 .00323 sq. in. (2.083mm2) #12 .00512 sq. in. (3.303mm2) #10 .00815 sq. in. (5.258mm2) #8 .01296 sq. in. (8.361mm2) UL Listed Wiring Capacity Fire Resistance Rating 4-Hrs. (D900) Note: When connection conduit sweeps to Through-Floor Fittings, ensure compliance with NEC fill tables. UL Characteristics Listing UL File Number Outlet Box E31999 Fire Resistance R8429 For use in 1, 1½, 2, 3 or 4 hour rated unprotected reinforced floors or in 1, 2, or 3 hour rated floors employing steel floor units and concrete topping (D900 Series designs). UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of floor area in each span. Note: The above product data pertains to both one-piece units and through-floor fittings. Dimensions in Inches (mm) www.hubbell-wiring.com Technical Information Max. Copper Cross Section 1 in. Power E.M.T 1 in. Low Voltage E.M.T .0307 sq. in. 0.024 sq. in. M-15 &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors Hubbell SystemOne High-Capacity A/V FRPT Technical Information S1PT3IM Series and S1PTAVFIT Ø 8.00" (203.2) Complies with UL514A 3.90" (99.1) Adjustable lower fire barrier 0.55" (14.0) ¾" E.M.T. Ø 3.88" (98.6) 1½" E.M.T. 1.93" (49.0) 0.93" (23.6) Gasket 0.60" (15.2) 1.04" (26.4) 11.02" (279.9) 13.02" (330.7) Product Information • • • • • Powder coat cast aluminum cover and flange (color finish options: aluminum, brass, black, gray and ivory). Hubbell SystemOne universal cover meets ADA standards for accessible design, section 4.3.8, "changes in level." S1PT3IM Series subplate supplied with pre-wired single 20A 125V black receptacle, NEMA 5-20R. Wired with three #12 AWG THHN stranded copper conductors. S1PT3IM subplate also accepts three unit recessed Hubbell iSTATION™; Copper Cross Sectional Wire Size Area for Solid or Stranded 15-Pin VGA, RCA, S-Video, 3.5 mm stereo and XLR microphone jacks. (AWG) #24 .00032 sq. in. (.206mm2) • • • • #22 .00050 sq. in. (.322mm2) #14 .00323 sq. in. (2.083mm2) #12 .00512 sq. in. (3.303mm2) #10 .00815 sq. in. (5.258mm2) #8 .01296 sq. in. (8.361mm2) Mounted in 4 in. (76.2) cored concrete diameter through hole. Floor thickness range: 2¼ in. to 7 in. (57.2 to 177.8). UL Listed for fire resistance in 1 – 4 hour rated D900 series floors. Approved for use in the City of Chicago. UL Listed Wiring Capacity Fire Resistance Rating 4-Hrs. (D900) Technical Information Conductors Application Data Max. Copper Cross Section ¾ in. Power E.M.T 1 ½ i n. Low Voltage E.M.T .0307 sq. in. 0.048 sq. in. Note: When connection conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables. UL Characteristics Listing UL File Number Outlet Box E31999 Fire Resistance R8429 For use in 1, 1½, 2, 3 or 4 hour rated unprotected reinforced floors or in 1, 2, or 3 hour rated floors employing steel floor units and concrete topping (D900 Series designs). UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of floor area in each span. Note: The above product data pertains to both one-piece units and through-floor fittings. M-16 www.hubbell-wiring.com Dimensions in Inches (mm) &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors Hubbell SystemOne Furniture Feed FRPT Complies with UL514A Technical Information S1PTFF Series 3.76" (95.4) 1½" N.P.T. Data Ø 8.00" (203.2) 0.40" (10.2) Adjustable lower fire barrier Ø 5.36" (136.1) Ø 3.88" (98.6) 1½" E.M.T. ¾" E.M.T. 1.93" (49.0) 0.93" (23.6) Gasket ¾" N.P.T. Power 0.53" (13.6) 1.01" (25.7) 11.02" (279.9) 13.02" (330.7) Product Information • Painted flush aluminum service fitting with matching cast aluminum carpet flange (color finish options: aluminum, brass, black, gray and ivory) • Hubbell SystemOne universal cover meets ADA standards for accessible design, section 4.3.8, "changes in level." • Aluminum conduit insert cover with one (1) ¾ in. and one (1) 1½ in. die-cast threaded plugs. Copper Cross Sectional • Furnished with one (1) ¾ in. and one (1) 1½ in. screw-in flexible metal conduit connectors. Application Data • • • • Mounted in a drilled 4 in. (76.2) concrete diameter through hole. Floor thickness range: 2¼ to 7 in. (57.2 to 177.8). UL Listed for fire resistance in 1 – 4 hour rated D900 series floors. Approved for use in the City of Chicago. Wire Size (AWG) Area for Solid or Stranded Conductors #24 .00032 sq. in. (.206mm2) #22 .00050 sq. in. (.322mm2) #14 .00323 sq. in. (2.083mm2) #12 .00512 sq. in. (3.303mm2) #10 .00815 sq. in. (5.258mm2) #8 .01296 sq. in. (8.361mm2) UL Listed Wiring Capacity Fire Resistance Rating 4-Hrs. (D900) Max. Copper Cross Section ¾ in. Power E.M.T 1 ½ i n. Low Voltage E.M.T .0614 sq. in. 0.048 sq. in. UL Characteristics Listing UL File Number Outlet Box E31999 Fire Resistance R8429 For use in 1, 1½, 2, 3 or 4 hour rated unprotected reinforced floors or in 1, 2, or 3 hour rated floors employing steel floor units and concrete topping (D900 Series designs). UL Spacing Restrictions - Minimum of 2 ft. on center and not more than one unit per each 65 square feet of floor area in each span. Note: The above product data pertains to both one-piece units and through-floor fittings. Dimensions in Inches (mm) www.hubbell-wiring.com Technical Information Note: When connection conduit sweeps to through-floor fittings, ensure compliance with NEC fill tables. M-17 &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors Hubbell SystemOne Universal Cover Complies with UL514A Technical Information S1CFC and S1TFC Series Ø 8.00" (203.2) 0.40" (10.2) Ø 5.62" (142.7) 0.47" (11.9) Ø 6.90" (175.3) Gasket Carpet Tile .55" (14.0) 0.64" (16.3) Product Information • • • • Powder coat cast aluminum cover and flange (color finish options: aluminum, brass, black, gray and ivory). As applied for carpeted and tile applications. Meets UL 514 scrub water exclusion requirements. Meets ADA standards for accessible design, section 4.3.8, "changes in level." Application Data Mounted to SystemOne Fire-Rated Poke-Throughs and SystemOne floor boxes ONLY, SystemOne sub-plate required. Technical Information Note: The above product data pertains to both one-piece and three-piece units. M-18 www.hubbell-wiring.com Dimensions in Inches (mm) &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP Hubbell SystemOne Furniture Feed Cover Technical Information S1SPFF and S1SPFFT Series Complies with UL514A Ø 8.00" (203.2) 1½" N.P.T. Data Ø 5.36" (136.1) Gasket Ø 5.62" (142.7) 0.47" (11.9) 3.66" (93.0) 3.66" (93.0) ¾" N.P.T. Power Carpet 2.41" (61.2) Tile 0.64" (16.3) Fire-Rated Poke-Throughs for Concrete Floors Fire-Rated Poke-Throughs for Concrete Floors Product Information • • • • • Powder coat cast aluminum cover and flange (color finish options: aluminum, brass, black, and gray). As applied for carpeted and tile applications. Furnished with one (1) ¾ in. and one (1) 1½ in. screw-in flexible metal conduit connectors. Meets UL 514 scrub water exclusion requirements. Meets ADA standards for accessible design, section 4.3.8, "changes in level." Application Data Mounted to SystemOne Fire-Rated Poke-Throughs and SystemOne floor boxes ONLY. No universal cover required. Note: The above product data pertains to both one-piece and three-piece units. Technical Information Dimensions in Inches (mm) www.hubbell-wiring.com M-19 &RXUWHV\RI6WHYHQ(QJLQHHULQJ,QF5\DQ:D\6RXWK6DQ)UDQFLVFR&$0DLQ2IILFH2XWVLGH/RFDO$UHDZZZVWHYHQHQJLQHHULQJFRP
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021