Sony DVP-SR200P User manual

CD/DVD

Player

Operating Instructions

4-115-670-13(1)

DVP-SR200P

© 2009 Sony Corporation

2

WARNING

To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture.

To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.

The mains lead must only be changed at a qualified service shop.

Batteries or batteries installed apparatus shall not be exposed to excessive heat such as sunshine, fire or the like.

CAUTION

The use of optical instruments with this product will increase eye hazard. As the laser beam used in this CD/DVD player is harmful to eyes, do not attempt to disassemble the cabinet.

Refer servicing to qualified personnel only.

Disposal of Old Electrical &

Electronic Equipment

This symbol is applicable only in the European Union and other

European countries with separate collection systems.

Precautions

Safety

• The power requirements and power consumption of this unit are indicated on the back of the unit. Check that the unit’s operating voltage is identical with your local power supply.

Power requirements and power consumption

m

DVP–XXXX

X

NO.

00V 00Hz

00W

0-000-000-00

• To prevent fire or shock hazard, do not place objects filled with liquids, such as vases, on the apparatus.

Installing

• Do not install the unit in an inclined position. It is designed to be operated in a horizontal position only.

• Keep the unit and discs away from equipment with strong magnets, such as microwave ovens, or large loudspeakers.

• Do not place heavy objects on the unit.

Lightning

For added protection for this set during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet. This will prevent damage to the set due to lightning and power-line surges.

Notes about the discs

• To keep the disc clean, handle the disc by its edge. Do not touch the surface. Dust, fingerprints, or scratches on the disc may cause it to malfunction.

• Do not expose the disc to direct sunlight or heat sources such as hot air ducts, or leave it in a car parked in direct sunlight as the temperature may rise considerably inside the car.

• After playing, store the disc in its case.

• Clean the disc with a cleaning cloth.

Wipe the disc from the centre out.

• Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for vinyl LPs.

• If you have printed the disc’s label, dry the label before playing.

Precautions

On safety

Should any solid object or liquid fall into the cabinet, unplug the player and have it checked by qualified personnel before operating it any further.

On power sources

• The player is not disconnected from the AC power source (mains) as long as it is connected to the wall outlet, even if the player itself has been turned off.

• If you are not going to use the player for a long time, be sure to disconnect the player from the wall outlet. To disconnect the AC power cord (mains lead), grasp the plug itself; never pull the cord.

On placement

• Place the player in a location with adequate ventilation to prevent heat build-up in the player.

• Do not place the player on a soft surface such as a rug.

• Do not place the player in a location near heat sources, or in a place subject to direct sunlight, excessive dust, or mechanical shock.

• Do not install this player in a confined space, such as a bookshelf or similar unit.

• Install the player so that the AC power cord

(mains lead) can be unplugged from the wall socket immediately in the event of trouble.

On operation

• If the player is brought directly from a cold to a warm location, or is placed in a very damp room, moisture may condense on the lenses inside the player. Should this occur, the player may not operate properly. In this case, remove the disc and leave the player turned on for about half an hour until the moisture evaporates.

• When you move the player, take out any discs. If you don’t, the disc may be damaged.

On adjusting volume

Do not turn up the volume while listening to a section with very low level inputs or no audio signals. If you do, the speakers may be damaged when a peak level section is played.

On cleaning

Clean the cabinet, panel, and controls with a soft cloth slightly moistened with a mild detergent solution. Do not use any type of abrasive pad, scouring powder or solvent such as alcohol or benzine.

On cleaning discs, disc/lens cleaners

Do not use cleaning discs or disc/lens cleaners (including wet or spray types).

These may cause the apparatus to malfunction.

On replacement of parts

In the event that this unit is repaired, repaired parts may be collected for reuse or recycling purposes.

IMPORTANT NOTICE

Caution: This player is capable of holding a still video image or on-screen display image on your television screen indefinitely. If you leave the still video image or on-screen display image displayed on your TV for an extended period of time you risk permanent damage to your television screen. Plasma display panel televisions and projection televisions are susceptible to this.

If you have any questions or problems concerning your player, please consult your nearest Sony dealer.

3

4

Table of Contents

WARNING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3

About This Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5

Guide to Parts and Controls. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6

Hookups . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

Step 1: Connecting to Your TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

A

Audio/video input jacks. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

B

Component video input jacks (Y, P

B

/C

B

, P

R

/C

R

) . . . . . . . . . . . . . . . . . 9

Step 2: Connecting the Mains Lead. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Step 3: Preparing the Remote . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10

Controlling your TV with the supplied remote . . . . . . . . . . . . . . . . . . . . . 11

Step 4: Quick Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12

Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Playing Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

Control Menu display (DISPLAY). . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16

List of Control Menu items . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17

Various Play Mode Functions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19

Creating your own programme (Programme Play) . . . . . . . . . . . . . . . . . 19

Playing in random order (Shuffle Play) . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Playing repeatedly (Repeat Play) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20

Repeating a specific portion (A-B Repeat Play). . . . . . . . . . . . . . . . . . . . 21

Customizing the Playback Configuration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Adjusting the playback picture (CUSTOM PICTURE MODE) . . . . . . . . . 22

Sharpening the picture (SHARPNESS) . . . . . . . . . . . . . . . . . . . . . . . . . . 22

Locking discs (PARENTAL CONTROL) . . . . . . . . . . . . . . . . . . . . . . . . . 22

Playing MP3 Audio and JPEG Images . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23

Selecting a JPEG image file . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24

Setting the pace for a slide show (INTERVAL) . . . . . . . . . . . . . . . . . . . . 25

Selecting the slides’ appearance (EFFECT) . . . . . . . . . . . . . . . . . . . . . . 25

Settings and Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

Using the Setup Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

LANGUAGE SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

SCREEN SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27

CUSTOM SETUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29

AUDIO SETUP. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Setting the digital output signal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30

Additional Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32

Self-diagnosis Function (When letters/numbers appear on the screen) . . . . 34

Playable Discs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34

Specifications. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36

Language Code List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Parental Control Area Code List . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37

Index . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

About This Manual

• Instructions in this manual describe the controls on the remote. You can also use the controls on the player if they have the same or similar names as those on the remote.

• “DVD” may be used as a general term for commercial DVDs, DVD+RWs/DVD+Rs/DVD+R

DLs (+VR mode) and DVD-RWs/DVD-Rs/DVD-R DLs (VR mode, video mode).

• NEED-to-know information (to prevent incorrect operation) is listed under the b

icon. NICEto-know information (tips and other useful information) is listed under the z

icon.

• The meaning of the icons used in this manual is described below:

Icons Meaning

Functions available for commercial DVDs and DVD+RWs/DVD+Rs/

DVD+R DLs in +VR mode or DVD-RWs/DVD-Rs/DVD-R DLs in video mode

Functions available for DVD-RWs/DVD-Rs/DVD-R DLs in VR (Video

Recording) mode

Functions available for VIDEO CDs (including Super VCDs or CD-Rs/

CD-RWs in video CD format or Super VCD format)

Functions available for music CDs or CD-Rs/CD-RWs in music CD format

Functions available for DATA discs containing MP3* audio tracks and

JPEG image files

* MP3 (MPEG-1 Audio Layer III) is a standard format defined by ISO (International Organization for

Standardization)/IEC (International Electrotechnical Commission) MPEG which compresses audio data.

MPEG Layer-3 audio coding technology and patents licensed from Fraunhofer IIS and Thomson.

5

6

Guide to Parts and Controls

For more information, see the pages indicated in parentheses.

Remote

PICTURE

NAVI

TV TV

CLEAR

TOP MENU

RETURN

FAST/SLOW

PLAY

TIME/TEXT

AUDIO SUBTITLE

MENU

DISPLAY

2 (volume) +, number 5, AUDIO, and N buttons have a tactile dot. Use the tactile dot as a reference when operating the player.

A PICTURE NAVI (24)

Divides the screen into 9 subscreens so you can choose the desired scene quickly.

Each time you press the button, the display changes as follows:

• CHAPTER VIEWER

• TITLE VIEWER

• TRACK VIEWER

The JPEG image files in the album appear in 16 subscreens.

TV t (input select) (11)

Switches the TV’s input source between the TV and other input sources.

TV [/1 (on/standby) (11)

Turns the TV on or to standby mode.

[

/1 (on/standby) (12)

Turns on, or sets the player to standby mode.

2

(volume) +/– (11)

Adjusts the TV volume.

B Number buttons

Enters the title/chapter numbers, etc.

CLEAR (17)

Clears the entry field.

C TIME/TEXT (23)

Displays the playing time and remaining time. Press repeatedly to change the displayed information.

CD/DVD text appears only when text is recorded on the disc.

If an MP3 audio track has an ID3 tag, the player will display the album name/track title from the ID3 tag information. This player supports ID3 versions 1.0/1.1 and 2.2/2.3.

AUDIO ( )

Changes the audio language or audio channel.

When 4 digits are displayed, they indicate a language code. See

“Language Code List” on page 37 to

see which language the code represents.

The format of the current audio signal

(Dolby Digital, DTS, PCM, etc.)

appears as shown on page 7.

◆ When playing a DVD VIDEO

Example:

Dolby Digital 5.1 ch

Rear (L/R)

1:ENGLISH DOLBY DIGITAL 3 / 2 .1

Front (L/R)

+ Centre

LFE (Low Frequency

Effect)

SUBTITLE (

) (25)

Changes the subtitles.

D TOP MENU

Displays the DVD’s top menu.

MENU (23)

Displays the menu.

O

RETURN (15)

Returns to the previous display.

DISPLAY (16)

Displays the playback information on the screen.

C/X/x/c (12)

Moves the highlight to select a displayed item.

Centre button (ENTER) (12)

Enters the selected item.

E ./> (previous/next)

/ advance)

(replay/step/step/

m

/M

(scan/slow)

N

(play)

X

(pause)

x

(stop)

FAST/SLOW PLAY

See “Basic operations” (page 7) for the

function of each button.

Basic operations

To

Play

Stop

Pause

Operation

Press N.

Press x.

Press X.

Go to the next chapter, track, or scene in continuous play mode

Press >.

Go back to the previous chapter, track, or scene in continuous play mode

Scan backward/ forward

Press ..

Press

M

.

m/

Press repeatedly to change the speed.

Replay the previous scene*

1

*

3

Briefly fast forward the current scene*

Play backward*

4 forward*

5 motion

/

in slow

2

*

3

Press

(replay) during playback.

Press

(advance) during playback.

Press X during playback, then press m/M repeatedly.

Play backward*

4

/ forward*

5

one frame at a time

Press X during playback, then press

/ .

Play in various speed with sound*

5

Press FAST/SLOW

PLAY repeatedly during playback.

*

1

*

2

*

3

*

4

*

5

For all DVDs except for DVD+RWs/DVD+Rs/

DVD+R DLs.

For DVDs only.

These functions may not work with some scenes.

For DVD VIDEOs and DVD-VR mode only.

For DVDs and VIDEO CDs only.

,continued

7

8

Front panel

A [/1 (on/standby) button (12)

B Disc tray (14)

C Front panel display (15)

D

(remote sensor) (10)

Rear panel

E Z (open/close) button (14)

F N (play) button (14)

G x (stop) button (14)

VIDEO

VIDEO OUT

COMPONENT

VIDEO OUT

Y

P

B

/C

B

DIGITAL

OUT

P

R

/C

R

COAXIAL

L

R

AUDIO OUT

A VIDEO OUT jack (9)

B COMPONENT VIDEO OUT jacks (9)

C DIGITAL OUT (COAXIAL) jack (10)

D AUDIO OUT L/R jacks (9)

Hookups

When unpacking, check the supplied accessories by referring to page 36.

b

• Plug cables securely to prevent unwanted noise.

• Refer to the instructions supplied with the components to be connected.

• Be sure to disconnect the mains lead of each component before connecting.

Step 1: Connecting to Your TV

Connect this player to your TV monitor using a video cable. Select pattern A or B, according to the input jack on your TV monitor, projector, or audio component.

A

INPUT

L

AUDIO

R

(white)

(red)

Audio/video cable (supplied)

(yellow)

VIDEO

TV

(yellow) (red) (white) to VIDEO OUT

VIDEO

VIDEO OUT

COMPONENT

VIDEO OUT

Y

P

B

/C

B

DIGITAL

OUT

P

R

/C COAXIAL

L

R

AUDIO OUT to AUDIO OUT

CD/DVD player to COMPONENT

VIDEO OUT

(green) (red) (blue)

Component video cable (not supplied)

COMPONENT

VIDEO IN

Y

B

(green)

P

B

/C

B

(blue)

P

R

/C

R

(red)

TV

: Signal flow

A

Audio/video input jacks

You will enjoy standard quality images.

B

Component video input jacks

(Y, P

B

/C

B

, P

R

/C

R

)

You will enjoy accurate colour reproduction and high quality images.

b

Connect the supplied audio cable to audio input jacks (L/R) on your TV.

When connecting to a standard 4:3 screen TV

Depending on the disc, the image may not fit your TV screen. To change the aspect ratio,

see page 27.

b

Do not connect a VCR, etc., between your TV and the player. If you pass the player signals via the

VCR, you may not receive a clear image on the TV screen. If your TV has only one audio/video input jack, connect the player to this jack.

,continued

9

To connect to your audio component

Use the following pattern.

CD/DVD player

VIDEO

VIDEO OUT

COMPONENT

VIDEO OUT

Y

P B /C B

DIGITAL

OUT

P

R

/C

R

COAXIAL

L

R

AUDIO OUT to DIGITAL OUT

(COAXIAL)

DIGITAL

OUT

Step 2: Connecting the

Mains Lead

Plug the player and TV mains lead (power cord) into a mains.

COAXIAL

Coaxial digital cable

(not supplied) to coaxial digital input

10

Audio component with a decoder

: Signal flow z

For correct speaker location, see the operating instructions supplied with the connected components.

If your audio component has a Dolby*

1

Digital, DTS*

2

, or MPEG audio decoder and a digital input jack, use this connection. You can enjoy Dolby Digital (5.1ch), DTS (5.1ch), and MPEG audio (5.1ch) surround effect.

*1

*2

Manufactured under license from Dolby

Laboratories.

Dolby, Pro Logic, and the double-D symbol are trademarks of Dolby Laboratories.

Manufactured under license under U.S. Patent #:

5,451,942 & other U.S. and worldwide patents issued & pending. DTS and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS, Inc.

Product includes software. © DTS, Inc. All

Rights Reserved.

b

• After you have completed the connection, make

the appropriate settings in Quick Setup (page 12).

If your audio component has an MPEG audio decoder function, set “MPEG” to “MPEG” in

“AUDIO SETUP” (page 31). Otherwise, no

sound or a loud noise will come from your speakers.

• The TVS effects of this player cannot be used with this connection.

• In order to listen to DTS sound tracks, you must use this connection. DTS sound tracks are not output through the AUDIO OUT L/R jacks, even if you set “DTS” to “ON” in Quick Setup

(page 12).

Step 3: Preparing the

Remote

You can control the player using the supplied remote. Insert two R6 (size AA) batteries by matching the 3 and # ends on the batteries to the markings inside the compartment.

When using the remote, point it at the remote sensor on the player.

b

• Do not leave the remote in an extremely hot or humid place.

• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.

• Do not expose the remote sensor to direct light from the sun or a lighting apparatus. Doing so may cause a malfunction.

• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion.

Controlling your TV with the supplied remote

You can control the sound level, input source, and power switch of your Sony TV with the supplied remote.

TVt TV

PICTURE

NAVI

Number buttons

CLEAR

TOP MENU

RETURN

TIME/TEXT

AUDIO SUBTITLE

MENU

DISPLAY

2 +/–

You can control your TV using the buttons below.

By pressing You can

TV [/1 Turn the TV on or off

2 (volume) +/– Adjust the volume of the TV

TV t

(input select)

Switch the TV’s input source between the TV and other input sources b

Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

To control other TVs with the remote

You can control the sound level, input source, and power switch of non-Sony TVs as well.

If your TV is listed in the table below, set the appropriate manufacturer’s code.

1

While holding down TV [/1, press the number buttons to select your TV’s manufacturer’s code (see the table below).

2

Release TV [/1.

◆Code numbers of controllable TVs

If more than one code number is listed, try entering them one at a time until you find the one that works with your TV.

Manufacturer Code number

Sony 01 (default)

Hitachi

JVC

24

33

LG/Goldstar

Panasonic

Philips

Samsung

Sharp

Toshiba

76

17, 49

06, 08, 72

71

29

38 b

• When you replace the batteries of the remote, the code number you have set may be reset to the default setting. Set the appropriate code number again.

• Depending on the connected unit, you may not be able to control your TV using all or some of the buttons on the supplied remote.

11

12

Step 4: Quick Setup

Follow the steps below to make the minimum number of basic adjustments for using the player.

To skip an adjustment, press >. To return to the previous adjustment, press .. The onscreen displays differ depending on the player model.

PICTURE

NAVI

TV TV

Number 0

CLEAR

TOP MENU

TIME/TEXT

AUDIO SUBTITLE

MENU

RETURN DISPLAY

ENTER

DISPLAY

FAST/SLOW

PLAY

1

Turn on the TV.

2

Press [/1.

The player turns on.

3

Switch the input selector on your

TV so that the signal from the player appears on the TV screen.

If the on-screen menu of the player does not appear on the connected TV, switch the player’s colour system to match the colour system of the TV (NTSC or PAL).

First turn off the player by pressing "/1, and then press DISPLAY, the number 0, and "/1 again on the remote. The player turns back on, and the on-screen menu appears on the TV.

“Press [ENTER] to run QUICK SETUP” appears at the bottom of the screen. If this message does not appear, select

“QUICK” under “SETUP” in the Control

Menu to run Quick Setup (page 17).

4

Press ENTER without inserting a disc.

The Setup Display for selecting the language used in the on-screen display appears.

The available languages differ depending upon the player model.

LANGUAGE SETUP

OSD:

MENU:

AUDIO:

SUBTITLE:

ENGLISH

ENGLISH

FRANÇAIS

DEUTSCH

ITALIANO

ESPAÑOL

NEDERLANDS

DANSK

SVENSKA

5

Press X/x to select a language.

The player displays the menu and subtitles in the selected language.

6

Press ENTER.

The Setup Display for selecting the aspect ratio of the TV to be connected appears.

SCREEN SETUP

TV TYPE:

COLOR SYSTEM (VIDEO CD):

16:9

16:9

SCREEN SAVER:

BACKGROUND:

4:3 OUTPUT:

4:3 LETTER BOX

4:3 PAN SCAN

PROGRESSIVE

(COMPONENT OUT ONLY)

:

MODE

(PROGRESSIVE)

:

OFF

AUTO

FULL

7

Press X/x to select the setting that

matches your TV type.

◆ If you have a wide-screen TV or a 4:3

standard TV with a wide-screen mode

• 16:9 (page 27)

◆ If you have a 4:3 standard TV

• 4:3 LETTER BOX or 4:3 PAN SCAN

(page 27)

8

Press ENTER.

The Setup Display for selecting the type of jack used to connect your audio component such as an amplifier

(receiver) appears.

Is this player connected to an amplifier

(receiver) ? Select the type of jack you are using.

YES

AUDIO OUTPUT L/R

DIGITAL OUTPUT

NO

9

Press X/x to select the type of jack

(if any) you are using to connect to an audio component, then press

ENTER.

If you did not connect an audio component, select “NO,” then go to step

13.

If you connected an audio component using just an audio cable, select “YES:

AUDIO OUTPUT L/R,” then go to step

13.

If you connected an audio component using a digital coaxial cable, select

“YES: DIGITAL OUTPUT.”

10

Press X/x to select the type of

Dolby Digital signal you wish to send to your audio component.

If your audio component has a Dolby

Digital decoder, select “DOLBY

DIGITAL.” Otherwise, select “D-PCM.”

AUDIO SETUP

AUDIO DRC:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

MPEG:

DTS:

48kHz/96kHz PCM:

STANDARD

DOLBY SURROUND

ON

DOLBY DIGITAL

DOLBY DIGITAL

D-PCM

48kHz/16bit

11

Press ENTER.

“DTS” is selected.

AUDIO SETUP

AUDIO DRC:

DOWNMIX:

DIGITAL OUT:

DOLBY DIGITAL:

MPEG:

DTS:

48kHz/96kHz PCM:

STANDARD

DOLBY SURROUND

ON

DOLBY DIGITAL

PCM

OFF

OFF

ON

12

Press X/x to select whether or not

you wish to send a DTS signal to your audio component.

If your audio component has a DTS decoder, select “ON.” Otherwise, select

“OFF.”

13

Press ENTER.

Quick Setup is finished and connections are complete.

If your audio component has an MPEG audio decoder, set “MPEG” to “MPEG”

(page 31).

13

14

Playback

Playing Discs

Depending on the DVD or VIDEO CD, some operations may be different or restricted.

Refer to the operating instructions supplied with your disc.

PICTURE

NAVI

TV TV

Number buttons

CLEAR

TOP MENU

TIME/TEXT

AUDIO SUBTITLE

MENU

ENTER

DISPLAY

RETURN

1

FAST/SLOW

PLAY

Press Z on the player, and place

the disc on the disc tray.

Playback side facing down

2

Press N.

The disc tray closes. The player starts playback (continuous play). Adjust the volume on the TV or the audio component.

Depending on the disc, a menu may appear on the TV screen. For DVD

VIDEOs, see page 7. For VIDEO CDs,

see page 15.

To stop playback

Press x.

To pause playback

Press X.

z

You can have the player turned off automatically whenever you leave it in stop mode for more than

30 minutes. To turn this function on or off, set

“AUTO POWER OFF” in “CUSTOM SETUP” to

“ON” or “OFF” (page 29).

b

Discs created on DVD recorders must be correctly finalized before they can be played. For more information about finalizing, refer to the operating instructions supplied with the DVD recorder.

Note on playing DTS sound tracks on a

DVD VIDEO

DTS audio signals are output only through the

DIGITAL OUT (COAXIAL) jack.

To resume playback from the point where you stopped the disc (Multi-disc Resume)

When you press N again after you stop playback, the player starts playback from the point when you pressed x.

z

• To play from the beginning of the disc, press x twice, then press N.

• With DVD VIDEOs and VIDEO CDs, the player stores the point where you stopped the disc for up to 6 discs and resumes playback the next time you insert the same disc. If you store a resume playback point for the seventh disc, the resume playback point for the first disc is deleted.

b

• “MULTI-DISC RESUME” in “CUSTOM

SETUP” must be set to “ON” (default) for this

function to work (page 29).

• Resume Play does not work during Shuffle Play and Programme Play.

• With some discs, Resume Play may not work, depending on the point you stop playback, or if you press [/1.

To play VIDEO CDs With PBC Functions

(PBC Playback)

PBC (Playback Control) allows you to play

VIDEO CDs interactively by following the menu on the TV screen.

When you start playing a VIDEO CD with

PBC functions, the menu for your selection appears.

Select an item using the number buttons, and press ENTER. Then, follow the instructions in the menu for interactive operations (press

N when “Press SELECT” appears).

Refer to the instructions supplied with the disc, as the operating procedure may differ depending on the VIDEO CD.

To return to the menu

Press O RETURN.

z

To play without using PBC, press ./> or the number buttons while the player is stopped to select a track, then press N or ENTER.

“Play without PBC” appears on the TV screen and the player starts continuous play. You cannot play still pictures such as a menu.

To return to PBC playback, press x twice then press N.

To lock the disc tray (Child Lock)

You can lock the disc tray to prevent children from opening it.

When the player is in standby mode, press O

RETURN, ENTER, and [/1 on the remote.

The player turns on and “ ” (LOCKED) appears on the front panel display. The Z button on the player does not work while the

Child Lock is set.

To unlock the disc tray, press O RETURN,

ENTER, and [/1 again when the player is in standby mode.

b

Even if you select “RESET” under “SETUP” in the

Control Menu (page 17), the disc tray remains

locked.

,continued

15

16

Control Menu display (DISPLAY)

Use the Control Menu to select a function and to view related information. Press DISPLAY repeatedly to turn on or change the Control Menu display as follows:

, Control Menu display 1 m

Control Menu display 2 (Except CD) m

Control Menu display off

The Control Menu display 1 and 2 will show different items depending on the disc type.

Example: Control Menu display 1 when playing a DVD VIDEO.

Press

X/x to select the Control Menu item, then press ENTER.

For details about the item, see “List of Control Menu items” (page 17, 18).

Control Menu items

Selected item

1 2 ( 2 7 )

1 8 ( 3 4 )

T 1 : 3 2 : 5 5

OFF

OFF

SET

ON

Currently playing chapter number*

2

Currently playing title number*

1

Total number of titles*

1

Total number of chapters*

2

Playback status

(N Playback,

X Pause, x Stop, etc.)

Type of disc being played*

3

PLAY

DVD VIDEO

Playing time*

4

Current setting

Options

Function name of selected Control

Menu item

Operation message

PROGRAM

ENTER

*

1

Displays the scene number for VIDEO CDs

(PBC is on), track number for VIDEO CDs/CDs,

*

2 album number for DATA discs.

Displays the index number for VIDEO CDs,

MP3 audio track number or JPEG image file number for DATA discs.

*

3

*

4

Displays Super VCD as “SVCD.”

Displays the date for JPEG files.

Quit: DISPLAY

List of Control Menu items

Item Item Name, Function

TITLE/SCENE/TRACK

CHAPTER/INDEX

TRACK

Selects the title, scene, track, chapter, or index to be played.

1

Press

X/x to select the search method.

“** (**)” is selected (** refers to a number).

2

Press ENTER.

“** (**)” changes to “-- (**).”

3

Press the number buttons to select the number you want to search.

4

Press ENTER.

TIME/TEXT

Checks the elapsed time and the remaining playback time.

Input the time code for picture and music searching (DVD only).

1

Press ENTER.

2

Input the time code using the number buttons, then press

ENTER.

For example, to find the scene at

2 hours, 10 minutes, and 20 seconds after the beginning, just enter “2:10:20.” b

You cannot search for a scene on a

DVD+RW/DVD+R/DVD+R DL using the time code.

ORIGINAL/PLAY LIST

Selects the type of titles (DVD-VR mode) to be played, the ORIGINAL one, or an edited PLAY LIST.

PROGRAM (page 19)

Selects the title, chapter, or track to play in the order you want.

SHUFFLE (page 20)

Plays the title, chapter, or track in random order.

REPEAT (page 20)

Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/album repeatedly.

A-B REPEAT (page 21)

Specifies the parts you want to play repeatedly.

SHARPNESS (page 22)

Exaggerates the outline of the image to produce a sharper picture.

PARENTAL CONTROL

(page 22)

Set to prohibit playback on this player.

SETUP (page 12, 26)

QUICK:

Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of the TV and the audio output signal.

CUSTOM:

In addition to the Quick Setup setting, you can adjust various other settings.

RESET:

Returns the settings in “SETUP” to the default setting.

ZOOM

Magnifies the image up to four times the original size, and scroll using C/

X/x/c.

To return to normal view, press

CLEAR.

This function is available for all pictures except a background image.

ANGLE

Changes the angle.

CUSTOM PICTURE MODE

(page 22)

Adjusts the video signal from the player. You can select the picture quality that best suits the programme you are watching.

,continued

17

18

TVS

Selects surround sound effect when connecting a stereo TV or 2 front speakers. This only works when playing a multichannel Dolby audio soundtrack. Furthermore, if the player is set up to output the signal from the DIGITAL OUT

(COAXIAL) jack, the surround effect will only be heard when

“DOLBY DIGITAL” is set to “D-

PCM” and “MPEG” is set to “PCM”

in “AUDIO SETUP” (page 30).

The default setting is underlined.

• OFF

Cancels the setting.

• TVS DYNAMIC THEATER

• TVS DYNAMIC

• TVS WIDE

This mode is effective when the distance between the front L and R speakers is short, such as with builtin speakers on a stereo TV.

• TVS NIGHT

This feature is useful when you want to hear the dialogue and enjoy the surround sound effects of “TVS

WIDE” at low volume.

• TVS STANDARD

Use this setting when you want to use TVS with 2 separate speakers.

b

• When you select one of the TVS modes, turn off the surround setting of the connected TV or audio component.

• The TVS effects do not work when using the Fast Play or Slow Play functions, even though you can change the TVS modes.

z

The Control Menu icon indicator lights up in green t

when you select any item except “OFF” (“PROGRAM,” “SHUFFLE,”

“REPEAT,” “A-B REPEAT,” “SHARPNESS,”

“ZOOM,” “TVS” only). The “ORIGINAL/PLAY

LIST” indicator lights up in green when you select

“PLAY LIST” (default setting). The “ANGLE” indicator lights up in green when you can change the angle. The “CUSTOM PICTURE MODE” indicator lights up in green when any setting other than “STANDARD” is selected.

◆Items for DATA discs

Item Item Name, Function

ALBUM

Selects the album that contains MP3 audio tracks and JPEG image file to be played.

FILE

Selects the JPEG image file to be played.

DATE

Displays the date the picture was taken by a digital camera.

INTERVAL (page 25)

Specifies the duration for which the slides are displayed on the screen.

EFFECT (page 25)

Selects the effects to be used for changing slides during a slide show.

MODE (MP3, JPEG)

Selects the data type; MP3 audio track (AUDIO), JPEG image file

(IMAGE), or both (AUTO) to be played when playing a DATA disc.

Various Play Mode

Functions

You can set the following play modes:

• Programme Play (page 19)

• Shuffle Play (page 20)

• Repeat Play (page 20)

• A-B Repeat Play (page 21)

b

The play mode is cancelled when:

– you open the disc tray.

– you press [/1 and the player enters standby mode.

Creating your own programme (Programme Play)

You can play the contents of a disc in the order you want. You can programme up to 99 titles, chapters, and tracks.

1

After selecting (PROGRAM)

on the Control Menu (page 16), press

X/x to select “SET

t

,” then press

ENTER.

“TRACK” is displayed when you play a VIDEO CD or CD.

PROGRAM

ALL CLEAR

1. TITLE

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE – –

T

– –

01

02

03

04

05

Titles or tracks recorded on a disc

2

Press c.

The cursor moves to the title or track row

“T” (in this case, “01”).

PROGRAM

ALL CLEAR

1. TITLE – –

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE – –

T

– –

01

02

03

04

05

C

ALL

01

02

03

04

05

06

3

Select the title, chapter, or track you want to programme.

◆ When playing a DVD VIDEO

For example, select chapter “03” of title

“02.”

Press X/x to select “02” under “T,” then press ENTER.

PROGRAM

ALL CLEAR

1. TITLE – –

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE – –

T

– –

01

02

03

04

05

C

ALL

01

02

03

04

05

06

Next, press

X/x to select “03” under “C,” then press ENTER.

PROGRAM

ALL CLEAR

1. TITLE 0 2 – 0 3

2. TITLE – –

3. TITLE – –

4. TITLE – –

5. TITLE – –

6. TITLE – –

7. TITLE – –

T

– –

01

02

03

04

05

Selected title and chapter

◆ When playing a VIDEO CD or CD

For example, select track “02.”

Press

X/x to select “02” under “T,” then press ENTER.

Selected track

PROGRAM

ALL CLEAR

1. TRACK 0 2

2. TRACK – –

3. TRACK – –

4. TRACK – –

5. TRACK – –

6. TRACK – –

7. TRACK – –

0:15:30

T

– –

01

02

03

04

05

Total time of the programmed tracks

4

Repeat steps 2 to 3, to programme other titles, chapters, or tracks.

The programmed titles, chapters, and tracks are displayed in the selected order.

Chapters recorded on a disc

,continued

19

20

5

Press N.

Programme Play begins.

When the programme ends, you can restart the same programme again by pressing N.

To return to normal play

Press CLEAR, or select “OFF” in step 1. To play the same programme again, select “ON” in step 1 and press ENTER.

To change or cancel a programme

1

Follow step 1 of “Creating your own programme (Programme Play).”

2

Select the programme number of the title, chapter, or track you want to change or cancel using

X/x and press c. If you want to delete the title, chapter, or track from the programme, press CLEAR.

3

Follow step 3 of “Creating your own programme (Programme Play)” for new programming. To cancel a programme, select “--” under “T,” then press ENTER.

To cancel all of the titles, chapters, or tracks in the programmed order

Press X and select “ALL CLEAR” in step 2 of

“Creating your own programme (Programme

Play)” and press ENTER.

z

You can perform Repeat Play or Shuffle Play of programmed titles, chapters, or tracks. During

Programme Play, follow the steps of Repeat Play

(page 20) or Shuffle Play (page 20).

b

• When you programme tracks on a Super VCD, the total playing time is not displayed.

• You cannot use this function with VIDEO CDs or

Super VCDs with PBC playback.

Playing in random order

(Shuffle Play)

You can have the player “shuffle” titles, chapters, or tracks. Subsequent “shuffling” may produce a different playing order.

1

After selecting (SHUFFLE) on

the Control Menu (page 16), press X/

x to select the item to be shuffled.

◆ When playing a DVD VIDEO

• TITLE

• CHAPTER

◆ When playing a VIDEO CD or CD

• TRACK

◆ When Programme Play is activated

• ON: shuffles titles, chapters, or tracks selected in Programme Play.

2

Press ENTER.

Shuffle Play starts.

To return to normal play

Press CLEAR, or select “OFF” in step 1.

z

• You can set Shuffle Play while the player is stopped. After selecting the “SHUFFLE” option, press N. Shuffle Play starts.

• Up to 200 chapters in a disc can be played in random order when “CHAPTER” is selected.

b

You cannot use this function with VIDEO CDs or

Super VCDs with PBC playback.

Playing repeatedly

(Repeat Play)

You can play all of the titles or tracks on a disc, or a single title, chapter, or track repeatedly.

You can use a combination of Shuffle or

Programme Play modes.

1

After selecting (REPEAT) on

the Control Menu (page 16), press X/

x to select the item to be repeated.

• DISC: repeats all of the titles, tracks, or albums. (Select ORIGINAL or PLAY

LIST in DVD-VR mode.)

• TITLE: repeats the current title on a disc.

• CHAPTER: repeats the current chapter.

• TRACK: repeats the current track.

• ALBUM: repeats the current album.

◆ When Programme Play or Shuffle Play

is activated

• ON: repeats Programme Play or Shuffle

Play.

2

Press ENTER.

Repeat Play starts.

3

When you reach the ending point

(point B), press ENTER again.

The set points are displayed and the player starts repeating this specific portion.

To return to normal play

Press CLEAR, or select “OFF” in step 1.

b

• A-B Repeat Play does not work across multiple titles.

• You may not set A-B Repeat Play for contents in

DVD-VR mode that contains still pictures.

To return to normal play

Press CLEAR, or select “OFF” in step 1.

b

You cannot use this function with VIDEO CDs or

Super VCDs with PBC playback.

Repeating a specific portion (A-B Repeat Play)

You can play a specific portion of a title, chapter or track repeatedly.

1

After selecting (A-B REPEAT)

on the Control Menu (page 16), press

X/x to select “SET t,” then press

ENTER.

The “A-B REPEAT” setting bar appears.

A 18 - 1:32:30 B

2

During playback, when you find the starting point (point A) of the portion to be played repeatedly, press ENTER.

The starting point (point A) is set.

A 18 - 1:32:55 B 18 - 1:33:05

21

22

Customizing the

Playback Configuration

Adjusting the playback picture

(CUSTOM PICTURE MODE)

You can adjust the video signal from the player to obtain the picture quality you want.

1

After selecting (CUSTOM

PICTURE MODE) on the Control Menu

(page 16), press X/x to select the

setting you want.

The default setting is underlined.

• STANDARD: displays a standard picture.

• DYNAMIC 1: produces a bold dynamic picture by increasing the picture contrast and the colour intensity.

• DYNAMIC 2: produces a more dynamic picture than DYNAMIC 1 by further increasing the picture contrast and colour intensity.

• CINEMA 1: enhances details in dark areas by increasing the black level.

• CINEMA 2: white colours become brighter and black colours become richer, and the colour contrast is increased.

• MEMORY: adjusts the picture in greater detail.

PICTURE Changes the contrast.

BRIGHTNESS Changes the overall brightness.

COLOR Makes the colours deeper or lighter.

HUE Changes the colour balance.

2

Press ENTER.

The selected setting takes effect.

b

The “BRIGHTNESS” setting is not effective if you connect the player via the VIDEO OUT jack and select “PROGRESSIVE (COMPONENT OUT

ONLY)” to “ON” using the “SCREEN SETUP.”

Sharpening the picture

(SHARPNESS)

You can enhance the outlines of images to produce a sharper picture.

1

After selecting (SHARPNESS)

on the Control Menu (page 16), press

X/x to select a level.

The default setting is underlined.

• OFF: cancels this option.

• 1: enhances the outline.

• 2: enhances the outline more than 1.

2

Press ENTER.

The selected setting takes effect.

Locking discs (PARENTAL

CONTROL)

Playback of some DVD VIDEOs can be limited according to a predetermined level such as the age of the users. The

“PARENTAL CONTROL” function allows you to set a playback limitation level.

1

After selecting (PARENTAL

CONTROL) on the Control Menu

(page 16), press X/x to select

“PLAYER t,” then press ENTER.

The password is required.

2

Enter or re-enter your 4-digit password using the number buttons, then press

ENTER.

The display for setting the playback limitation level appears.

3

Press X/x to select “STANDARD,”

then press ENTER.

The selection items for “STANDARD” are displayed.

z

When you watch a movie, “CINEMA 1” or

“CINEMA 2” is recommended.

4

Press X/x to select a geographic area

as the playback limitation level, then press ENTER.

The area is selected.

When you select “OTHERS t,” select and enter a standard code in the table on

page 37 using the number buttons.

5

Press X/x to select “LEVEL,” then

press ENTER.

The selection items for “LEVEL” are displayed.

6

Select the level you want using X/x,

then press ENTER.

Parental Control setting is complete.

The lower the value, the stricter the limitation.

Playing MP3 Audio and

JPEG Images

You can play MP3 audio tracks and JPEG image files on DATA discs.

You can enjoy JPEG images as a slide show.

PICTURE

NAVI

PICTURE

NAVI

TV TV

CLEAR

RETURN

TOP MENU

AUDIO

TIME/

TEXT

SUBTITLE

MENU

ENTER

DISPLAY

FAST/SLOW

PLAY

To turn off the Parental Control function

Set “LEVEL” to “OFF” in step 6.

To set or change your password

After selecting “PARENTAL CONTROL” on the Control Menu, select “PASSWORD t,” then press ENTER.

z

If you forget your password, remove the disc and

repeat step 1 of “Locking discs (PARENTAL

CONTROL).” When you are asked to enter your

password, enter “199703” using the number buttons, then press ENTER. The display will ask you to enter a new 4-digit password. After you enter a new 4-digit password, replace the disc in the player and press N. When the display for entering your password appears, enter your new password.

b

Depending on the disc, you may be asked to change the parental control level while playing the disc. In this case, enter your password, then change the level. If the Resume Play mode is cancelled, the level returns to the previous level.

z

You can view the disc information while playing

MP3 audio tracks and JPEG image files using

TIME/TEXT (page 6).

b

DATA CDs recorded in KODAK Picture CD format automatically start playing when inserted.

1

Press MENU.

The list of albums on the disc appears.

When an album is being played, its title is shaded.

1 ( 15)

Album 1

Album 2

Album 3

Album 4

Album 5

Album 6

Album 7

Album 8

2

Press X/x to select the album.

,continued

23

24

3

Press N.

Playback starts from the selected album.

The JPEG images in the selected album start playing as a slide show.

To select a specific MP3 audio track, press ENTER and press X/x to select a track, then press ENTER.

To select a specific JPEG image file, see

“Selecting a JPEG image file” (page 24).

Selecting a JPEG image file

1

Press MENU.

The list of albums on the disc appears.

2

Press X/x to select the album, then

press PICTURE NAVI.

The image files in the album appear in 16 subscreens. A scroll box is displayed on the right.

To stop playback

Press x.

To go to the next or previous page

Press c or C.

To return to the previous display

Press O RETURN.

To go to the next or previous MP3 audio track

Press > or . during playback. You can select the first track of the next album by pressing > during playback of the last track of the current album.

Note that you cannot return to the previous album by using ., and that you need to select the previous album from the album list.

To turn on or off the display

Press MENU repeatedly.

z

Of the selected album, you can select to play only the MP3 audio tracks, JPEG image files, or both, by

setting “MODE (MP3, JPEG)” (page 18).

1

5

9

2

6

10

3

7

11

4

8

12

13 14 15 16

To display additional images, select a bottom image and press x. To return to a previous image, select a top image and press X.

3

Press C/X/x/c to select the image you

want to view, and press ENTER.

The selected image appears.

To go to the next or previous JPEG image file

Press

C or c during playback. You can select the first file of the next album by pressing c during playback of the last file of the current album.

Note that you cannot return to the previous album by using C, and that you need to select the previous album from the album list.

To rotate a JPEG image

Press

X/x while viewing the image. Each time you press X, the image rotates counterclockwise by 90 degrees.

To return to normal view, press CLEAR.

Note that the view also returns to normal if you press C/c to go to the next or previous image.

To display JPEG image information

Press SUBTITLE while viewing JPEG image files.

The file name, camera maker/model, date, time, picture resolution, file size, camera setting information (ISO speed rating,

Exposure time, F Number, Exposure bias, or

Focal length) of the picture are displayed on the screen.

is displayed when the picture was taken using flash.

is displayed when the image is automatically rotated.

To hide the information, press SUBTITLE.

Note that the above information may not appear depending on the digital camera.

To stop viewing the JPEG image

Press x.

b

PICTURE NAVI does not work if “AUDIO (MP3)”

is selected in “MODE (MP3, JPEG)” (page 18).

Setting the pace for a slide show (INTERVAL)

You can set the time the slides are displayed on the screen.

1

After selecting (INTERVAL) on

the Control Menu (page 16), press X/

x to select a setting.

The default setting is underlined.

• NORMAL: sets to standard duration.

• FAST: sets a duration shorter than

NORMAL.

• SLOW 1: sets a duration longer than

NORMAL.

• SLOW 2: sets a duration longer than

SLOW 1.

2

Press ENTER.

Selecting the slides’ appearance (EFFECT)

You can select the way the slides are displayed during a slide show.

1

After selecting (EFFECT) on

the Control Menu (page 16), press X/

x to select a setting.

The default setting is underlined.

• MODE 1: the images randomly cycle through the effects.

• MODE 2: the next image slides over the previous image.

• MODE 3: the image sweeps in from top to bottom.

• MODE 4: the image sweeps in from left to right.

• MODE 5: the image stretches out from the centre of the screen.

• OFF: turns off this function.

2

Press ENTER.

25

26

Settings and Adjustments

Using the Setup Display

By using the Setup Display, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup Display, among other things.

For details on each Setup Display item, see

pages from 26 to 31.

b

Playback settings stored in the disc take priority over the Setup Display settings and not all of the functions described may work.

1

Press DISPLAY when the player is in stop mode.

The Control Menu appears.

2

Press X/x to select

(SETUP), then press ENTER.

The options for “SETUP” appear.

• QUICK: makes the basic adjustments

(page 12).

• CUSTOM: makes various adjustments.

• RESET: resets all the settings explained

on pages 26 to 31.

3

Press X/x to select “CUSTOM,”

then press ENTER.

The Setup Display appears.

Select the setup category and adjust each item following the instruction on pages

26 to 31.

LANGUAGE SETUP

OSD:

MENU:

AUDIO:

SUBTITLE:

ENGLISH

ENGLISH

ORIGINAL

ENGLISH

LANGUAGE SETUP

“LANGUAGE SETUP” allows you to set various languages for the on-screen display or sound track.

Select “LANGUAGE SETUP” in the Setup

Display.

◆ OSD (On-Screen Display)

Switches the display language on the screen.

◆ MENU (DVD VIDEO only)

You can select the desired language for the disc’s menu.

◆ AUDIO (DVD VIDEO only)

Switches the language of the sound track.

When you select “ORIGINAL,” the language given priority in the disc is selected.

◆ SUBTITLE (DVD VIDEO only)

Switches the language of the subtitle recorded on the DVD VIDEO.

When you select “AUDIO FOLLOW,” the language for the subtitles changes according to the language you selected for the sound track.

z

If you select “OTHERS t” in “MENU,”

“SUBTITLE,” or “AUDIO,” select and enter a

language code from “Language Code List” on page 37 using the number buttons.

b

If you select a language in “MENU,”

“SUBTITLE,” or “AUDIO” that is not recorded on a DVD VIDEO, one of the recorded languages will be automatically selected.

SCREEN SETUP

Choose settings according to the TV to be connected.

Select “SCREEN SETUP” in the Setup

Display. To use the display, see “Using the

Setup Display” (page 26).

The default settings are underlined and differ depending on the player model.

◆ TV TYPE

Selects the aspect ratio of the connected TV

(4:3 standard or wide).

16:9

4:3

LETTER

BOX

4:3

PAN SCAN

Select this when you connect a wide-screen TV or a TV with a wide mode function.

Select this when you connect a

4:3 screen TV. Displays a wide picture with bands on the upper and lower portions of the screen.

Select this when you connect a

4:3 screen TV. Automatically displays the wide picture on the entire screen and cuts off the portions that do not fit.

16:9

4:3 LETTER BOX

4:3 PAN SCAN b

Depending on the DVD, “4:3 LETTER BOX” may be selected automatically instead of “4:3 PAN

SCAN” or vice versa.

◆ COLOR SYSTEM (VIDEO CD)

Selects the colour system when you play a

VIDEO CD.

AUTO

PAL

NTSC

Outputs the video signal in the system of the VIDEO CD, either PAL or NTSC. If your

TV is the DUAL system, select

AUTO.

Changes the video signals of an

NTSC VIDEO CD and outputs it in the PAL system.

Changes the video signals of a

PAL VIDEO CD and outputs it in the NTSC system.

◆ SCREEN SAVER

The screen saver image appears when you leave the player in pause or stop mode for 15 minutes, or when you play a CD, or DATA disc (MP3 audio) for more than 15 minutes.

The screen saver will help prevent your display device from becoming damaged

(ghosting). Press N to turn off the screen saver.

ON

OFF

Turns on the screen saver.

Turns off the screen saver.

◆ BACKGROUND

Selects the background colour or picture on the TV screen when the player is in stop mode or while playing a CD, or DATA disc (MP3 audio).

JACKET

PICTURE

The jacket picture (still picture) appears, but only when the jacket picture is already recorded on the disc (CD-

EXTRA, etc.). If the disc does not contain a jacket picture, the

“GRAPHICS” picture appears.

GRAPHICS A preset picture stored in the player appears.

BLUE

The background colour is blue.

BLACK

The background colour is black.

,continued

27

28

◆ PROGRESSIVE (COMPONENT OUT

ONLY)

If your TV accepts progressive (525p/625p) format signals, set “PROGRESSIVE

(COMPONENT OUT ONLY)” to “ON.”

Note that you must connect to a progressive format TV using the COMPONENT VIDEO

OUT jacks (page 9).

OFF

ON

To output normal (interlace) signals.

To output progressive signals.

To output progressive signals

1

Select “PROGRESSIVE

(COMPONENT OUT ONLY),” and press ENTER.

2

Select “ON,” and press ENTER.

The display asks for confirmation.

3

Select “Start,” and press ENTER.

The video switches to a progressive signal for 5 seconds.

4

If the picture appears normal, select

“YES,” and press ENTER.

If not, select “NO,” and press ENTER.

To reset the setting

If the picture does not appear normal or goes blank, press [/1 to turn off the player, and enter “369” using the number buttons on the remote, then press [/1 to turn on the player again.

◆ MODE (PROGRESSIVE)

In order for these images to appear natural on your screen when output in progressive mode, the progressive video signal needs to be converted to match the type of DVD software that you are watching.

This setting is effective only when you set

“PROGRESSIVE (COMPONENT OUT

ONLY)” in “SCREEN SETUP” to “ON.”

AUTO

VIDEO

Automatically detects the software type (film-based or video-based) and selects the appropriate conversion mode.

Normally, select this position.

Fixes the conversion mode to the mode for video-based software.

◆ 4:3 OUTPUT

This setting is effective only when you set

“TV TYPE” in “SCREEN SETUP” to

“16:9.”

Adjust this to watch 4:3 aspect ratio progressive signals. If you can change the aspect ratio on your progressive format

(525p/625p) compatible TV, change the setting on your TV, not the player. This setting is effective only when

“PROGRESSIVE (COMPONENT OUT

ONLY)” is set to “ON” in “SCREEN

SETUP.”

FULL

NORMAL

Select this when you can change the aspect ratio on your

TV.

Select this when you cannot change the aspect ratio on your

TV. Shows a 16:9 aspect ratio signal with black bands on left and right sides of the image.

16:9 aspect ratio TV

CUSTOM SETUP

Use this to set up playback related and other settings.

Select “CUSTOM SETUP” in the Setup

Display. To use the display, see “Using the

Setup Display” (page 26).

The default settings are underlined and differ depending on the player model.

◆ AUTO POWER OFF

Switches the Auto Power Off setting on or off.

OFF

ON

Switches this function off.

The player enters standby mode when left in stop mode for more than 30 minutes.

◆ AUTO PLAY

Switches the Auto Play setting on or off. This function is useful when the player is connected to a timer (not supplied).

OFF

ON

Switches this function off.

Automatically starts playback when the player is turned on by a timer (not supplied).

◆ PAUSE MODE (DVDs only)

Selects the picture in pause mode.

AUTO

FRAME

The picture, including subjects that move dynamically, is output with no jitter. Normally select this position.

The picture, including subjects that do not move dynamically, is output in high resolution.

◆ TRACK SELECTION (DVD VIDEO only)

Gives the sound track which contains the highest number of channels priority when you play a DVD VIDEO on which multiple audio formats (PCM, MPEG audio, DTS, or Dolby

Digital format) are recorded.

OFF

AUTO

No priority given.

Priority given.

b

• When you set the item to “AUTO,” the language may change. The “TRACK SELECTION” setting has higher priority than the “AUDIO” settings in

“LANGUAGE SETUP” (page 26).

• If you set “DTS” to “OFF” (page 31), the DTS

sound track is not played even if you set “TRACK

SELECTION” to “AUTO.”

• If PCM, DTS, MPEG audio, and Dolby Digital sound tracks have the same number of channels, the player selects PCM, DTS, MPEG audio, and

Dolby Digital sound tracks in this order.

◆ MULTI-DISC RESUME (DVD VIDEO/

VIDEO CD only)

Switches the Multi-disc Resume setting on or off. Resume playback can be stored in memory for up to 6 different DVD VIDEOs/

VIDEO CDs (page 14).

ON

OFF

Stores the resume setting in memory for up to 6 discs.

Does not store the resume setting in memory. Playback restarts at the resume point only for the current disc in the player.

b

If you run Quick Setup, Multi-disc Resume setting stored in memory may return to the default settings.

29

30

AUDIO SETUP

“AUDIO SETUP” allows you to set the sound according to the playback and connection conditions.

Select “AUDIO SETUP” in the Setup

Display. To use the display, see “Using the

Setup Display” (page 26).

The default settings are underlined and differ depending on the player model.

◆ AUDIO DRC (Dynamic Range Control)

(DVDs only)

Makes the sound clear when the volume is turned down when playing a DVD that conforms to “AUDIO DRC.”

This function affects the output from the following jacks:

– AUDIO OUT L/R jacks

– DIGITAL OUT (COAXIAL) jack only when “DOLBY DIGITAL” is set to “D-

PCM” (page 30).

STANDARD Normally, select this position.

TV MODE

Makes low sounds clear even if you turn the volume down.

WIDE

RANGE

Gives you the feeling of being at a live performance.

◆ DOWNMIX (DVDs only)

Switches the method for mixing down to 2 channels when you play a DVD which has rear sound elements (channels) or is recorded in Dolby Digital format. For details on the

rear signal components, see page 7. This

function affects the output of the following jacks:

– AUDIO OUT L/R jacks

– DIGITAL OUT (COAXIAL) jack when

“DOLBY DIGITAL” is set to “D-PCM”

(page 30).

DOLBY

SUR-

ROUND

Normally, select this position.

Multi-channel audio signals are output to 2 channels for enjoying surround sounds.

NORMAL Multi-channel audio signals are downmixed to 2 channels for use with your stereo.

◆ DIGITAL OUT

Selects if audio signals are output via the

DIGITAL OUT (COAXIAL) jack.

ON

OFF

Normally, select this position.

When you select “ON,” see

“Setting the digital output signal”

for further settings.

The influence of the digital circuit upon the analogue circuit is minimal.

Setting the digital output signal

Switches the method of outputting audio signals when you connect a component such as an audio component or MD deck with a digital input jack.

For connection details, see page 10.

Select “DOLBY DIGITAL,” “MPEG,”

“DTS,” and “48kHz/96kHz PCM” after setting “DIGITAL OUT” to “ON.”

If you connect a component that is incompatible with the selected audio signal, a loud noise (or no sound) may be heard from the speakers, risking damage to your ears or speakers.

◆ DOLBY DIGITAL (DVDs only)

Selects the type of Dolby Digital signal.

DOLBY

DIGITAL

D-PCM

Select this when the player is connected to an audio component with a built-in

Dolby Digital decoder.

Select this when the player is connected to an audio component without a built-in

Dolby Digital decoder. You can select whether the signals conform to Dolby Surround

(Pro Logic) or not by making adjustments to the

“DOWNMIX” item in

“AUDIO SETUP” (page 30).

◆ MPEG (DVDs only)

Selects the type of MPEG audio signal.

PCM

MPEG

Select this when the player is connected to an audio component without a built-in

MPEG decoder. If you play multi-channel MPEG audio sound tracks, only the Front (L) and Front (R) signals will be output from your two front speakers.

Select this when the player is connected to an audio component with a built-in

MPEG decoder.

◆ DTS

Selects whether or not to output DTS signals.

OFF

ON

Select this when the player is connected to an audio component without a built-in

DTS decoder.

Select this when the player is connected to an audio component with a built-in DTS decoder.

b

The analogue audio signals from the AUDIO OUT

L/R jacks are not affected by this setting and keep their original sampling frequency level.

• When you play a DVD VIDEO with DTS sound tracks, set “DTS” to “ON” in

“AUDIO SETUP” (page 31).

• If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to “ON” in “AUDIO SETUP”

(page 31). A loud noise may come out from

the speakers, affecting your ears or causing the speakers to be damaged.

◆ 48kHz/96kHz PCM (DVD VIDEO only)

Selects the sampling frequency of the audio signal.

48kHz/16bit The audio signals of DVD

VIDEOs are always converted to 48kHz/16bit.

96kHz/24bit All types of signals including

96kHz/24bit are output in their original format. However, if the signal is encrypted for copyright protection purposes, the signal is only output as

48kHz/16bit.

31

32

Additional Information

Troubleshooting

If you experience any of the following difficulties while using the player, use this troubleshooting guide to help remedy the problem before requesting repairs. Should any problem persist, consult your nearest

Sony dealer.

Power

The power is not turned on.

, Check that the mains lead is connected securely.

Picture

There is no picture/picture noise appears.

, Re-connect the connecting cable securely.

, The connecting cables are damaged.

, Check the connection to your TV (page 9)

and switch the input selector on your TV so that the signal from the player appears on the TV screen.

, The disc is dirty or flawed.

, The disc is recorded in a colour system that is different from your TV.

, You set the “PROGRESSIVE

(COMPONENT OUT ONLY)” to “ON” in

“SCREEN SETUP” (page 28) even though

your TV cannot accept the progressive

signal. In this case, refer to page 28 to reset

the setting.

, If the colour system of your player does not match with that of your TV, change the colour system of the player. For details, see

page 12. (You cannot change the colour

system of the DVD disc itself.)

, Even if your TV is compatible with progressive format 525p/625p signals and connected using COMPONENT VIDEO

OUT jacks, the image may be affected when you set the player to progressive format. In this case, set the “PROGRESSIVE

(COMPONENT OUT ONLY)” in

“SCREEN SETUP” to “OFF” (page 28) so

that the player is set to normal (interlace) format.

Sound

There is no sound.

, Re-connect the connecting cable securely.

, The connecting cable is damaged.

, The player is connected to the wrong input

jack on the audio component (page 9, 10).

, The audio component input is not correctly set.

, The player is in pause mode or in Slowmotion Play mode.

, The player is in fast forward or fast reverse mode.

, If the audio signal does not come through the DIGITAL OUT (COAXIAL) jack,

check the audio settings (page 30).

, While playing a Super VCD on which the audio track 2 is not recorded, no sound will come out when you select “2:STEREO,”

“2:1/L,” or “2:2/R.” Press AUDIO to select the recorded track.

, When playing multichannel MPEG audio sound tracks, only the Front (L) and Front

(R) signals will be output from two front speakers.

The sound volume is low.

, The sound volume is low on some DVDs.

The sound volume may improve if you set

“AUDIO DRC” in “AUDIO SETUP” to

“TV MODE” (page 30).

Operation

The remote does not function.

, The batteries in the remote are weak.

, There are obstacles between the remote and the player.

, The distance between the remote and the player is too far.

, The remote is not pointed at the remote sensor on the player.

The disc does not play.

, The disc is turned over.

Insert the disc with the playback side facing down.

, The disc is skewed.

, The player cannot play certain discs

(page 34).

, The region code on the DVD does not match the player.

, Moisture has condensed inside the player

(page 3).

, The player cannot play a recorded disc that

is not correctly finalized (page 35).

The MP3 audio track cannot be played

(page 34).

, The player cannot play audio tracks in mp3PRO format.

, “MODE (MP3, JPEG)” is set to “IMAGE

(JPEG)” (page 18).

The JPEG image file cannot be played

(page 34).

, The image is larger than 3072 (width)

×

2048 (height) in normal mode, or more than

3,300,000 pixels in progressive JPEG.

(Some progressive JPEG files cannot be displayed even if the file size is within this specified capacity.)

, “MODE (MP3, JPEG)” is set to “AUDIO

(MP3)” (page 18).

The MP3 audio tracks and JPEG image files start playing simultaneously.

, “MODE (MP3, JPEG)” is set to “AUTO”

(page 18).

The album/track/file names are not displayed correctly.

, The player can only display numbers and alphabet. Other characters are displayed as

“*.”

The disc does not start playing from the beginning.

, Programme Play, Shuffle Play, Repeat Play,

or A-B Repeat Play is selected (page 19).

, Resume play has taken effect (page 14).

“Copyright lock” appears and the screen turns blue when playing in DVD-VR mode.

, Images taken from digital broadcasts, etc., may contain copy protection signals, such as complete copy protection signals, single copy signals, and restriction-free signals.

When images that contain copy protection signals are played, a blue screen may appear instead of the images. It may take a while when looking for playable images. (For player that cannot play images that contain a copy protection only)

Some functions such as Stop, Fast Play,

Slow Play, Slow-motion Play, Repeat

Play, Shuffle Play, or Programme Play cannot be performed.

, Depending on the disc, you may not be able to do some of the operations above.

The player does not operate properly.

, When static electricity, etc., causes the player to operate abnormally, unplug the player.

5 numbers or letters are displayed on the screen.

, The self-diagnosis function was activated.

(See the table on page 34.)

The disc tray does not open and “

(LOCKED) appears on the front panel display.

, Child Lock is set (page 15).

”

The disc tray does not open and

“ ” (TRAY LOCKED) appears on the front panel display.

, Contact your Sony dealer or local authorized Sony service facility.

“Data error” appears on the TV screen when playing a DATA disc.

, The MP3 audio track/JPEG image file you want to play is broken.

, The data is not MPEG-1 Audio Layer III data.

, The JPEG image file format does not

conform to DCF (page 34).

, The JPEG image file has the extension

“.JPG” or “.JPEG,” but is not in JPEG format.

33

34

Self-diagnosis Function

(When letters/numbers appear on the screen)

When the self-diagnosis function is activated to prevent the player from malfunctioning, a five-character service number (e.g., C 13 50) with a combination of a letter and four digits appears on the screen. In this case, check the following table.

First three characters of the service number

C 13

Cause and/or corrective action

C 31

The disc is dirty or recorded in a format that this player

cannot play (page 34).

, Clean the disc with a cleaning cloth or check its format.

The disc is not inserted correctly.

, Re-insert the disc correctly.

Playable Discs

Format of discs

Commercial DVD

DVD-RW/-R

DVD+RW/+R/

+R DL

VIDEO CD/

Music CD

CD-RW/-R

The player can play recordable media that is correctly finalized.

“DVD+RW,” “DVD-RW,” “DVD+R,”

“DVD+R DL,” “DVD-R,” “DVD VIDEO,” and “CD” logos are trademarks.

The player cannot play the discs other than above. Also, the player cannot play the following discs:

• A disc that has a non-standard shape (e.g., card, heart).

• A disc with paper or stickers on it.

• A disc that has the adhesive of cellophane tape or a sticker still left on it.

Note about CDs/DVDs

The player can play CD-ROMs/CD-Rs/CD-

RWs recorded in the following formats:

– music CD format

– video CD format

– MP3 (MPEG-1 Audio Layer III) audio tracks and JPEG image files of format conforming to ISO 9660* Level 1/Level 2, or its extended format, Joliet

– KODAK Picture CD format

* A logical format of files and folders on CD-

ROMs, defined by ISO (International

Organization for Standardization).

The player can play DVD-ROMs/

DVD+RWs/DVD+Rs/DVD+R DLs/

DVD-RWs/DVD-Rs/DVD-R DLs recorded in the following formats:

– MP3 audio tracks and JPEG image files of format conforming to UDF (Universal Disk

Format).

MP3 audio track or JPEG image file that the player can play

The player can play the following tracks and files:

– MP3 audio tracks with the extension

“.MP3.”

– JPEG image files with the extension

“.JPEG” or “.JPG.”

– JPEG image files that conform to the DCF* image file format.

* “Design rule for Camera File system”: Image standards for digital cameras regulated by JEITA

(Japan Electronics and Information Technology

Industries Association).

z

• If you add numbers (01, 02, 03, etc.) to the front of the track/file names when you store the tracks

(or files) in a disc, the tracks and files will be played in that order.

• Since a disc with a complex hierarchy of folders takes longer to start playback, it is recommended that you create albums with no more than two hierarchies.

• To repeat both MP3 audio tracks and JPEG image files in a single album, repeat the same MP3 audio track or album when “MODE (MP3, JPEG)” is set to “AUTO.” See “Playing repeatedly (Repeat

Play)” (page 20) to repeat the track or album.

b

• The player will play any data with the extension

“.MP3,” “.JPG,” or “.JPEG,” even if they are not in MP3 or JPEG format. Playing these data may generate a loud noise which could damage your speaker system.

• The player does not conform to audio tracks in mp3PRO format.

• Some JPEG files cannot be played.

• You can view a slide show with sound only when the MP3 audio tracks and JPEG image files are placed in the same album.

• If playing time of JPEG image or MP3 audio is longer than the other, the longer one continues without sound or image.

• If you play large MP3 track data and JPEG image data at the same time, the sound may skip. It is recommended that you set the MP3 bit rate to 128 kbps or lower when creating the file. If the sound still skips, then reduce the size of the JPEG file.

• Some JPEG files, especially progressive JPEG files or JPEG files of 3,000,000 pixels or more, may take longer to display than others, which may make the duration seem longer than the setting you selected.

• The player recognizes a maximum of 200 albums regardless of the selected mode. Of each album, the player recognizes up to 300 MP3 audio tracks and 300 JPEG image files when “AUTO” is selected, 600 MP3 audio tracks when “AUDIO

(MP3)” is selected and 600 JPEG image files when “IMAGE (JPEG)” is selected.

• Proceeding to the next or another album may take some time.

Region code

Your player has a region code printed on the back of the unit and only will play commercial DVDs (playback only) labelled with identical region codes. This system is used to protect copyrights.

Commercial DVDs labelled play on this player.

ALL

will also

Depending on the commercial DVD, there may be no region code indication, even though playing the commercial DVD is prohibited by area restrictions.

DVP–XXXX

X

Region code

00V 00Hz

NO. 00W

0-000-000-00 b

• Notes about recordable media

Some recordable media cannot be played on this player due to the recording quality or physical condition of the disc, or the characteristics of the recording device and authoring software.

The disc will not play if it has not been correctly finalized. For more information, refer to the operating instructions for the recording device.

Note that some playback functions may not work with some DVD+RWs/DVD+Rs/DVD+R DLs, even if they have been correctly finalized. In this case, view the disc by normal playback. Also some DATA discs created in Packet Write format cannot be played.

• Music discs encoded with copyright protection technologies

This product is designed to playback discs that conform to the Compact Disc (CD) standard.

Various music discs encoded with copyright protection technologies are marketed by some record companies. Please be aware that among those discs, there are some that do not conform to the CD standard and may not be playable by this product.

• For player that cannot play images that contain a copy protection only

Images in DVD-VR mode with CPRM* protection may not be played if they contain a copy protection signal. “Copyright lock” appears on the screen.

* CPRM (Content Protection for Recordable

Media) is a coding technology that protects the copyright of images.

• Note on DualDiscs

A DualDisc is a two sided disc product which mates DVD recorded material on one side with digital audio material on the other side.

However, since the audio material side does not conform to the Compact Disc (CD) standard, playback on this product is not guaranteed.

,continued

35

36

Note on playback operations of

DVDs and VIDEO CDs

Some playback operations of DVDs and

VIDEO CDs may be intentionally set by software producers. Since this player plays

DVDs and VIDEO CDs according to the disc contents the software producers designed, some playback features may not be available.

Also, refer to the instructions supplied with the DVDs or VIDEO CDs.

Specifications

System

Laser: Semiconductor laser

Outputs

(Jack name: Jack type/Output level/Load impedance)

AUDIO OUT:

Phono jack/2 Vrms/10 kilohms

DIGITAL OUT (COAXIAL):

Phono jack/0.5 Vp-p/75 ohms

COMPONENT VIDEO OUT (Y, P

B

/C

B

,

P

R

/C

R

):

Phono jack/Y: 1.0 Vp-p, P

B

/C

B

, P

R

/ C

R

:

0.7 Vp-p/75 ohms

VIDEO OUT:

Phono jack/1.0 Vp-p/75 ohms

General

Power requirements:

110 – 240 V AC, 50/60 Hz

See page 2 for further information.

Power consumption: 10 W

Dimensions (approx.):

320

× 38 × 209 mm (width/height/depth) incl. projecting parts

Mass (approx.): 1.2 kg

Operating temperature: 5

°C to 35 °C

Operating humidity: 25 % to 80 %

Supplied accessories

• Audio/video cable (phono plug

× 3 y phono plug

× 3) (1)

• Remote commander (remote) (1)

• R6 (size AA) batteries (2)

Specifications and design are subject to change without notice.

Language Code List

For details, see pages 6, 26.

The language spellings conform to the ISO 639: 1988 (E/F) standard.

Code Language

1027 Afar

1028 Abkhazian

1032 Afrikaans

1039 Amharic

1044 Arabic

1045 Assamese

1051 Aymara

1052 Azerbaijani

1053 Bashkir

1057 Byelorussian

1059 Bulgarian

1060 Bihari

1061 Bislama

1066 Bengali;

Bangla

1067 Tibetan

1070 Breton

1079 Catalan

1093 Corsican

1097 Czech

1103 Welsh

1105 Danish

1109 German

1130 Bhutani

1142 Greek

1144 English

1145 Esperanto

1149 Spanish

1150 Estonian

1151 Basque

1157 Persian

1165 Finnish

1166 Fiji

1171 Faroese

1174 French

1181 Frisian

Code Language

1183 Irish

1186 Scots Gaelic

1194 Galician

1196 Guarani

1203 Gujarati

1209 Hausa

1217 Hindi

1226 Croatian

1229 Hungarian

1233 Armenian

1235 Interlingua

1239 Interlingue

1245 Inupiak

1248 Indonesian

1253 Icelandic

1254 Italian

1257 Hebrew

1261 Japanese

1269 Yiddish

1283 Javanese

1287 Georgian

1297 Kazakh

1298 Greenlandic

1299 Cambodian

1300 Kannada

1301 Korean

1305 Kashmiri

1307 Kurdish

1311 Kirghiz

1313 Latin

1326 Lingala

1327 Laothian

1332 Lithuanian

1334 Latvian;

Lettish

1345 Malagasy

Code Language

1347 Maori

1349 Macedonian

1350 Malayalam

1352 Mongolian

1353 Moldavian

1356 Marathi

1357 Malay

1358 Maltese

1363 Burmese

1365 Nauru

1369 Nepali

1376 Dutch

1379 Norwegian

1393 Occitan

1403 (Afan)Oromo

1408 Oriya

1417 Punjabi

1428 Polish

1435 Pashto;

Pushto

1436 Portuguese

1463 Quechua

1481 Rhaeto-

Romance

1482 Kirundi

1483 Romanian

1489 Russian

1491 Kinyarwanda

1495 Sanskrit

1498 Sindhi

1501 Sangho

1502 Serbo-

Croatian

1503 Singhalese

1505 Slovak

1506 Slovenian

Code Language

1507 Samoan

1508 Shona

1509 Somali

1511 Albanian

1512 Serbian

1513 Siswati

1514 Sesotho

1515 Sundanese

1516 Swedish

1517 Swahili

1521 Tamil

1525 Telugu

1527 Tajik

1528 Thai

1529 Tigrinya

1531 Turkmen

1532 Tagalog

1534 Setswana

1535 Tonga

1538 Turkish

1539 Tsonga

1540 Tatar

1543 Twi

1557 Ukrainian

1564 Urdu

1572 Uzbek

1581 Vietnamese

1587 Volapük

1613 Wolof

1632 Xhosa

1665 Yoruba

1684 Chinese

1697 Zulu

1703 Not specified

Parental Control Area Code List

For details, see page 22.

Code Area

2044 Argentina

2047 Australia

2046 Austria

2057 Belgium

2070 Brazil

2079 Canada

2090 Chile

2092 China

2115 Denmark

Code Area

2165 Finland

2174 France

2109 Germany

2248 India

2238 Indonesia

2254 Italy

2276 Japan

2304 Korea

2363 Malaysia

Code Area

2362 Mexico

2376 Netherlands

2390 New Zealand

2379 Norway

2427 Pakistan

2424 Philippines

2436 Portugal

2489 Russia

2501 Singapore

Code Area

2149 Spain

2499 Sweden

2086 Switzerland

2528 Thailand

2184 United

Kingdom

37

38

Index

Numerics

16:9 27

4:3 LETTER BOX 27

4:3 OUTPUT 28

4:3 PAN SCAN 27

48kHz/96kHz PCM 31

5.1 Channel Surround 10

A

A-B REPEAT 17, 21

A-B Repeat Play 21

Advance 7

ALBUM 18

ANGLE 17

AUDIO 26

AUDIO DRC 30

AUDIO SETUP 30

AUTO PLAY 29

AUTO POWER OFF 29

B

BACKGROUND 27

Batteries 10

C

CD 14, 34

CHAPTER 17

CHAPTER VIEWER 6

Child Lock 15

COLOR SYSTEM (VIDEO

CD) 27

Connecting 9

Continuous play

CD/VIDEO CD 14

DVD 14

Control Menu 16

Control Menu Display 16

CUSTOM 26

CUSTOM PICTURE MODE

17, 22

CUSTOM SETUP 29

D

DATA disc 5

DATE 18

DIGITAL OUT 30

Digital output 30

Display 16

DOLBY DIGITAL 30

DOWNMIX 30

DTS 31

DVD 5, 14

DVD+RW 5, 7

DVD-RW 5

E

EFFECT 18, 25

F

FAST/SLOW PLAY 7

FILE 18

Film based software 28

H

Handling discs 2

I

ID3 tag 6

INDEX 17

INTERVAL 18, 25

J

JPEG 5

L

LANGUAGE SETUP 26

M

MEMORY 22

MENU 26

MODE (MP3, JPEG) 18

MODE (PROGRESSIVE) 28

MP3 5

MPEG 31

MULTI-DISC RESUME 14, 29

N

NTSC 12

O

On-screen display 26

ORIGINAL 17

ORIGINAL/PLAY LIST 17

OSD 26

P

PAL 12

PARENTAL CONTROL 17,

22

PAUSE MODE 29

PBC Playback 15

PICTURE NAVI 6

PLAY LIST 17

Playable Discs 34

PROGRAM 17, 19

Programme Play 19

PROGRESSIVE

(COMPONENT OUT

ONLY) 28

Q

QUICK 17

Quick Setup 12

R

Remote 6, 10, 11

REPEAT 17, 20

Repeat Play 20

Replay 7

RESET 17

Resume 14, 29

S

Scan backward 7

Scan forward 7

SCENE 17

SCREEN SAVER 27

SCREEN SETUP 27

SETUP 17, 26

Setup Display 26

SHARPNESS 17, 22

SHUFFLE 17, 20

Shuffle Play 20

Slow-motion Play 7

SUBTITLE 25, 26

T

TIME/TEXT 17

TITLE 17

TITLE VIEWER 6

TRACK 17

TRACK SELECTION 29

TRACK VIEWER 6

Troubleshooting 32

TV TYPE 27

TVS 18

V

Video based software 28

VIDEO CD 5, 14

Z

ZOOM 17

4-115-670-13(1)

Sony Corporation Printed in China