Garmin Zumo 345 LM Owner's Manual
Below you will find brief information for zūmo 395. This motorcycle GPS Navigator has features like Bluetooth connectivity for hands-free calling and music control, rider alerts for curves, speed cameras, and more. Fuel tracking helps monitor fuel consumption, and service history logging aids in maintenance. Map customization, trip planning, and adventurous routing enhance your ride.
Advertisement
Advertisement
zūmo
®
395
Owner’s Manual
January 2016 190-02000-00_0A
All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of Garmin. Garmin reserves the right to change or improve its products and to make changes in the content of this manual without obligation to notify any person or organization of such changes or improvements. Go to www.garmin.com
for current updates and supplemental information concerning the use of this product.
ANT ® , ANT+
Garmin.
® , Garmin countries. myGarmin
® , the Garmin logo, TracBack ® , VIRB ® , and zūmo ® are trademarks of Garmin Ltd. or its subsidiaries, registered in the USA and other
™ and myTrends ™ are trademarks of Garmin Ltd. or its subsidiaries. These trademarks may not be used without the express permission of
The Bluetooth
PANDORA ®
® word mark and logos are owned by the Bluetooth SIG, Inc., and any use of such marks by Garmin is under license. microSD
SD-3C. Windows ® is a registered trademark of Microsoft Corporation in the United States and/or other countries. Mac ®
™ is a trademark of
is a trademark of Apple Computer, Inc.
, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. SPOTIFY ® and the Spotify logo are among the registered trademarks of Spotify AB. Compatible mobile digital devices and premium subscription required, where available. Go to www.garmin.com
. This product incorporates Spotify software which is subject to third party licenses found here: www.spotify.com/connect
/third-party-licenses . Soundtrack every journey with Spotify. Play songs and artists you love, or let Spotify entertain you.
This product is ANT+ ® certified. Visit www.thisisant.com/directory for a list of compatible products and apps.
Table of Contents
Installation...................................................................... 1
Mounting Your Device in a Motorcycle ....................................... 1
Powered Motorcycle Mount ................................................... 1
Installing the Handlebar Base ................................................ 1
Attaching the Power Cables to the Motorcycle Mount ........... 1
Attaching the Base Plate to the Motorcycle Mount ................ 2
Attaching the Base Plate to the Handlebar Base ................... 2
Installing Your Device in the Motorcycle Mount ..................... 2
Removing Your Device from the Motorcycle Mount ................... 2
Mounting Your Device in an Automobile .................................... 2
Getting Started............................................................... 2
Device Overview ......................................................................... 3
Support and Updates .................................................................. 3
Updating Maps and Software with Garmin Express .............. 3
Turning the Device On or Off...................................................... 3
Acquiring GPS Signals ............................................................... 3
Status Bar Icons......................................................................... 4
Using the On-Screen Buttons ..................................................... 4
Adjusting the Volume .................................................................. 4
Adjusting the Screen Brightness ................................................ 4
Transportation Modes ................................................................. 4
Choosing a Transportation Mode .......................................... 4
Using the On-Screen Keyboard .................................................. 4
Using the Large Button Keyboard .......................................... 4
Rider Awareness Features and Alerts.......................... 4
Enabling or Disabling Rider Alerts .............................................. 4
Red Light and Speed Cameras .................................................. 4
Viewing Helmet Law Notifications ...............................................5
Searching for Helmet Laws .........................................................5
Navigating to Your Destination..................................... 5
Routes........................................................................................ 5
Starting a Route.......................................................................... 5
Changing the Route Calculation Mode .................................. 5
Taking a Route Using Adventurous Routing .......................... 5
Creating a Round-Trip Route ................................................. 5
Starting a Route by Using the Map ........................................ 5
Going Home ........................................................................... 6
Your Route on the Map ...............................................................6
Active Lane Guidance ............................................................ 6
Viewing Turns and Directions ................................................ 6
Viewing the Entire Route on the Map .................................... 6
Adding a Location to Your Route ................................................ 6
Shaping Your Route ................................................................... 6
Taking a Detour .......................................................................... 6
Stopping the Route ..................................................................... 7
Trip Planner ................................................................................ 7
Planning a Trip ....................................................................... 7
Navigating to a Saved Trip .....................................................7
Optimizing the Order of Destinations in a Trip ....................... 7
Editing and Reordering Locations in a Trip ............................ 7
Changing Routing Options for a Trip ..................................... 7
Scheduling a Trip ................................................................... 7
Sharing Trips ..........................................................................7
Using Suggested Routes ............................................................ 7
Avoiding Delays, Tolls, and Areas .............................................. 8
Avoiding Toll Roads ............................................................... 8
Avoiding Toll Stickers .............................................................8
Avoiding Road Features ........................................................ 8
Custom Avoidances ............................................................... 8
Navigating Off Road ................................................................... 8
Fuel Tracking.............................................................................. 8
Enabling Fuel Tracking .......................................................... 8
Setting a Low Fuel Warning ................................................... 8
Resetting the Fuel Tank Mileage ........................................... 8
Enabling Dynamic Fuel Stops ................................................ 9
Finding and Saving Locations...................................... 9
Finding a Location Using the Search Bar ................................... 9
Viewing Search Results on the Map ........................................... 9
Changing the Search Area ......................................................... 9
Points of Interest......................................................................... 9
Finding a Location by Category ............................................. 9
Searching Within a Category ................................................. 9
Navigating to Points of Interest Within a Venue .................... 9
Foursquare ...........................................................................10
Search Tools .............................................................................10
Finding an Address .............................................................. 10
Finding an Intersection .........................................................10
Finding a City ....................................................................... 10
Finding a Location Using Coordinates ................................. 10
Viewing Recently Found Locations .......................................... 10
Clearing the List of Recently Found Locations .................... 10
Finding Your Last Parking Spot ................................................ 10
Viewing Current Location Information ...................................... 10
Finding Emergency Services and Fuel ................................ 10
Getting Directions to Your Current Location ........................ 10
Adding a Shortcut ..................................................................... 10
Removing a Shortcut ........................................................... 10
Saving Locations ...................................................................... 10
Saving a Location ................................................................ 10
Saving Your Current Location .............................................. 10
Editing a Saved Location ..................................................... 10
Assigning Categories to a Saved Location .......................... 11
Deleting a Saved Location ................................................... 11
Sharing a Saved Location .................................................... 11
Using the Map............................................................... 11
Map Tools ................................................................................. 11
Viewing a Map Tool ............................................................. 11
Enabling Map Tools ............................................................. 11
Up Ahead .................................................................................. 11
Viewing Upcoming Locations ............................................... 11
Customizing the Up Ahead Categories ................................ 11
Trip Information .........................................................................12
Viewing Trip Data from the Map .......................................... 12
Viewing the Trip Information Page ....................................... 12
Viewing the Trip Log ............................................................ 12
Resetting Trip Information ....................................................12
Customizing the Map ................................................................ 12
Customizing the Map Layers ............................................... 12
Changing the Map Data Field .............................................. 12
Changing the Map Perspective ............................................ 12
Bluetooth Connected Features................................... 12
Bluetooth Feature Requirements .............................................. 12
Pairing Your Phone and Headset ............................................. 12
Bluetooth Feature Status Icons ................................................ 12
Enabling or Disabling Bluetooth Features for Your Headset .... 12
Hands-Free Calling ................................................................... 13
Placing a Call ....................................................................... 13
Receiving a Call ................................................................... 13
Using the Call History .......................................................... 13
Using In-Call Options ........................................................... 13
Saving a Home Phone Number ........................................... 13
Disconnecting a Bluetooth Device ............................................ 13
Deleting a Paired Phone ........................................................... 13
Using the Apps............................................................. 13
Media Player ............................................................................. 13
Adding the Media Player Tool to the Map ............................ 13
Changing the Media Source ................................................ 13
Tracks....................................................................................... 13
Table of Contents i
ii
Viewing Track Information ................................................... 13
TracBack®................................................................................ 14
Following Your Recent Track ............................................... 14
Saving Your Recent Track as a Trip .................................... 14
Tire Pressure ............................................................................ 14
Setting Up the Tire Pressure Sensors ................................. 14
Installing the Sensors on Your Tires .................................... 14
Tire Pressure Alerts ............................................................. 14
Tire Pressure Sensor Sleep Mode ....................................... 15
Using the Compass .................................................................. 15
VIRB® Remote......................................................................... 15
Controlling a VIRB Action Camera .......................................15
Logging Service History ............................................................ 15
Adding Service Categories .................................................. 15
Deleting Service Categories ................................................ 15
Renaming Service Categories ............................................. 15
Deleting Service Records .................................................... 15
Editing a Service Record ..................................................... 15
Viewing Help Files .................................................................... 15
Searching Help Topics ......................................................... 15
Viewing Previous Routes and Destinations .............................. 15
Customizing the Device............................................... 15
Map and Vehicle Settings ......................................................... 15
Enabling or Disabling Rider Alerts ....................................... 15
Enabling Maps ..................................................................... 15
Navigation Settings ................................................................... 16
Calculation Mode Settings ................................................... 16
Setting a Simulated Location ............................................... 16
Bluetooth Settings .....................................................................16
Disabling Bluetooth .............................................................. 16
Display Settings ........................................................................ 16
Units and Time Settings ............................................................16
Setting the Time ................................................................... 16
Language and Keyboard Settings ............................................ 16
Proximity Alerts Settings ........................................................... 16
Device and Privacy Settings ..................................................... 16
Restoring Settings .................................................................... 17
Device Information....................................................... 17
Specifications ............................................................................17
Charging the Device ................................................................. 17
Device Maintenance..................................................... 17
Device Care .............................................................................. 17
Cleaning the Outer Casing ...................................................17
Cleaning the Touchscreen ................................................... 17
Avoiding Theft ...................................................................... 17
Resetting the Device .................................................................17
Removing the Device, Mount, and Suction Cup ....................... 17
Removing the Device from the Mount ..................................17
Removing the Mount from the Suction Cup ......................... 17
Removing the Suction Cup from the Windshield ................. 17
Changing the Fuse in the Vehicle Power Cable ....................... 17
Troubleshooting........................................................... 18
The suction cup will not stay on my windshield ........................ 18
My device is not acquiring satellite signals ............................... 18
The device does not charge in my vehicle ............................... 18
My battery does not stay charged for very long ........................ 18
My phone will not connect to the device ................................... 18
Appendix....................................................................... 18
Installing a Memory Card for Maps and Data ........................... 18
Data Management .................................................................... 18
About Memory Cards ........................................................... 18
Connecting the Device to Your Computer ........................... 18
Transferring Data From Your Computer .............................. 19
Viewing GPS Signal Status ...................................................... 19
Purchasing Additional Maps ..................................................... 19
Purchasing Accessories ........................................................... 19
Index.............................................................................. 20
Table of Contents
Installation
Mounting Your Device in a Motorcycle
Powered Motorcycle Mount
WARNING
Garmin ® strongly recommends having an experienced installer with the proper knowledge of electrical systems install the device. Incorrectly wiring the power cable can result in damage to the vehicle or the battery and can cause bodily injury.
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
The device must be mounted in a suitable and secure location on your motorcycle, based on available power sources and safe cable routing.
NOTE: Both 1/4 in. standard and M6 bolts are included.
Match the size of the factory bolts on your clutch-clamp or brake-clamp bracket.
2 Thread the new bolts
Â
Á
through the handlebar base, spacers
, and clutch-clamp or brake-clamp bracket.
3 Tighten the bolts to secure the base.
Attaching the Power Cables to the Motorcycle Mount
1 Thread the power cable connector
À opening in the motorcycle mount.
through the top of the
À
Á
Â
Motorcycle cradle
12 to 24 Vdc system power (red) with in-line fuse
System ground (black)
Installing the Handlebar Base
The device includes parts for two handlebar installation solutions. Custom mounts may require additional hardware.
Installing the U-bolt and Handlebar Base
1 Place the U-bolt
À
around the handlebar ends through the handlebar base
Â
.
Á
, and thread the
2 Slide the cable down to the bottom of the opening the cable back until it is snug.
Á
and pull
3 Screw the black screw hold the cable in place.
Â
into the back of the mount
Ã
to
2 Tighten the nuts to secure the base.
NOTE: The recommended torque is 50 lbf-in (5.65 N-m). Do not exceed torque of 80 lbf-in (9.04 N-m).
4 Thread the weather cap into the hole.
Ä
through the top hole and press it
Installation 1
Attaching the Base Plate to the Motorcycle Mount
NOTICE
Direct, sustained contact with the base plate, or any part of the motorcycle, may damage the mount over time. To prevent this kind of damage, you must place the mounting spacers between the mount and base plate, and make sure that no part of the device or mount touches the motorcycle.
1 Thread the M4 x 20 mm panhead screws washers
Á
, cradle, spacers
Â
À
through the
, and base plate
Ã
.
2 Tighten the nuts to secure the base plate.
Attaching the Base Plate to the Handlebar Base
1 Align the ball of the handlebar base base plate
Á
À
and the ball of the
with each end of the double-socket arm .
Â
Removing Your Device from the Motorcycle
Mount
1 Press the release button on the side of the mount.
2 Lift out the device.
Mounting Your Device in an Automobile
NOTICE
Before mounting the device, check the local laws pertaining to windshield mounting.
WARNING
This product contains a lithium-ion battery. To prevent the possibility of personal injury or product damage caused by battery exposure to extreme heat, store the device out of direct sunlight.
Do not use the suction cup mount on a motorcycle.
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
1 Plug the automotive power cable
À mount.
into the port
Á
on the
2 Insert each ball into the double-socket arm.
3 Tighten the knob slightly.
4 Adjust for optimal viewing and operation.
5 Tighten the knob to secure the mount.
Installing Your Device in the Motorcycle Mount
1 Fit the bottom of your device into the cradle.
2 Tilt the device back until it snaps into place.
3 If the latch on top of the mount stays up after you insert the device, press it down.
2
2 Remove the clear plastic from the suction cup
Â
.
3 Clean and dry your windshield and the suction cup with a lintfree cloth.
4 Press the suction cup to the windshield, and flip the lever
à back toward the windshield.
5 Snap the cradle
Ä
onto the suction cup arm.
6 Fit the bottom of your device into the cradle.
7 Tilt the device back until it snaps into place.
8 Plug the other end of the automotive power cable into a power outlet.
Getting Started
WARNING
See the Important Safety and Product Information guide in the product box for product warnings and other important information.
• Update the maps and software on your device ( Support and
• Mount the device and connect it to power (
• Pair your Bluetooth ® phone and headset (
) (optional).
• Acquire GPS signals (
Acquiring GPS Signals, page 3 ).
• Adjust the screen brightness ( Adjusting the Screen
).
• Navigate to your destination ( Starting a Route, page 5
).
Getting Started
Device Overview
À
Á
Â
Ã
Power key
Micro-USB power and data port
Audio line-out jack microSD ™ memory card slot
Support and Updates
Garmin Express ™ ( www.garmin.com/express ) provides easy access to these services for Garmin devices.
• Product registration
• Product manuals
• Software updates
• Map, chart, or course updates
• Vehicles, voices, and other extras
Updating Maps and Software with Garmin Express
You can use Garmin Express software to download and install the latest map and software updates for your device. Map updates provide the latest available mapping data to ensure your device continues to calculate accurate and efficient routes to your destinations. Garmin Express is available for Windows ® and Mac ® computers.
1 On your computer, go to www.garmin.com/express .
6 Click Add a Device.
The Garmin Express software detects your device.
7 Click Add Device.
8 Follow the on-screen instructions to add your device to the
Garmin Express software.
When setup is complete, the Garmin Express software searches for map and software updates for your device.
9 Select an option:
• To install all available updates, click Install All.
• To install a single update, click View Details and select an update.
2 Select an option:
• To install on a Windows computer, select Download for
Windows.
• To install on a Mac computer, select Download for Mac.
3 Open the downloaded file, and follow the on-screen instructions to complete the installation.
4 Start Garmin Express.
5 Connect your Garmin device to your computer using a USB cable.
Getting Started
The Garmin Express software downloads and installs the updates onto your device. Map updates are very large, and this process may take a long time on slower Internet connections.
Turning the Device On or Off
• To turn the device on, press the power key, or connect the device to power.
• To put the device in power saving mode, press the power key while the device is on.
While in power saving mode, the screen is off and the device uses very little power, but it can wake instantly for use.
TIP: You can charge your device faster by putting it in power saving mode while charging the battery.
• To turn off the device completely, hold the power key until a prompt appears on the screen, and select Off.
The prompt appears after five seconds. If you release the power key before the prompt appears, the device enters power saving mode.
Acquiring GPS Signals
When you turn on your navigation device, the GPS receiver must collect satellite data and establish the current location. in the status bar indicates the satellite signal strength. The time required to acquire satellite signals varies based on several factors, including how far you are from the location where you last used your navigation device, whether you have a clear view of the sky, and how long it has been since you last used your navigation device. The first time you turn on your navigation device, it may take several minutes to acquire satellite signals.
1 Turn on the device.
2 Wait while the device locates satellites.
3
3 If necessary, go outdoors to an open area, away from tall buildings and trees.
When turns green, the device has acquired satellite signals and is ready for navigation.
Status Bar Icons
The status bar is located at the top of the main menu. The status bar icons display information about features on the device. You can select some icons to change settings or view additional information.
GPS signal status. Hold to view GPS accuracy and acquired
satellite information ( Viewing GPS Signal Status, page 19 ).
Bluetooth technology status. Select to view the Bluetooth
settings ( Bluetooth Settings, page 16 ).
Connected to hands-free calling. Select to place a phone call
( Hands-Free Calling, page 13 ).
Active vehicle profile. Select to view the vehicle profile settings.
Current time. Select to set the time (
Battery charge level.
Fuel status. Select to view fuel tracking information.
Using the On-Screen Buttons
On-screen buttons allow you to navigate the pages, menus, and menu options on your device.
• Select to return to the previous menu screen.
• Hold to quickly return to the main menu.
• Select or to scroll through lists or menus.
• Hold or to scroll faster.
• Select to see a context-based menu of options for the current screen.
Adjusting the Volume
Before you can adjust the volume, you must connect your device to a powered mount or a headset using Bluetooth wireless technology.
1 Select Volume.
2 Select an option:
• Use the slider bar to adjust the volume.
• Select to mute the device.
• Select for additional options.
Adjusting the Screen Brightness
1 Select Settings > Display > Brightness.
2 Use the slider bar to adjust the brightness.
Transportation Modes
Routing and navigation are calculated differently based on your transportation mode. The current transportation mode is indicated by an icon in the status bar.
Automobile mode
Motorcycle mode
Off-road mode
Choosing a Transportation Mode
Select .
Using the On-Screen Keyboard
See "Language and Keyboard Settings" to change the keyboard
layout ( Language and Keyboard Settings, page 16
).
4
• Select to delete a search entry.
• Select to delete a character.
• Select to change the keyboard language mode.
• Select marks.
to enter special characters, such as punctuation
• Select to change character capitalization.
Using the Large Button Keyboard
You can enable additional keyboard languages or layouts in the
language and keyboard settings ( Language and Keyboard
• Select or to view more characters.
• Select to switch to other keyboard languages and layouts.
Rider Awareness Features and Alerts
NOTICE
The rider alerts and speed limit features are for information only and do not replace your responsibility to abide by all posted speed limit signs and to use safe driving judgment at all times.
Garmin is not responsible for any traffic fines or citations you receive for failing to follow all applicable traffic laws and signs.
Your device provides features that can help encourage safer riding and increase efficiency, even when you are riding in a familiar area. The device plays an audible tone or message and displays information for each alert. You can enable or disable the audible tone or message for each type of alert. Not all alerts are available in all areas.
School zone or nearby school: The device plays a tone and displays the distance to and speed limit (if available) for an upcoming school or school zone.
Speed limit reduction: The device plays a tone and displays the upcoming reduced speed limit so you can be prepared to reduce your speed.
Speed limit exceeded: The device plays a tone and displays a red border on the speed limit icon when you exceed the posted speed limit for the current road.
Railroad crossing: The device plays a tone and displays the distance to an upcoming railroad crossing.
Animal crossing: The device plays a tone and displays the distance to an upcoming animal crossing area.
Curve: The device plays a tone and displays the distance to a curve in the road.
Slower traffic: The device plays a tone and displays the distance to slower traffic when you approach slower traffic at a higher speed. Your device must be receiving traffic information to use this feature.
Fatigue warning: The device plays a tone and suggests upcoming rest stops after you have been driving for more than two hours without stopping.
Enabling or Disabling Rider Alerts
You can turn off individual audible rider alerts. Visual alerts appears even when the audible alert is disabled.
1 Select Settings > Map & Vehicle > Audible Rider Alerts.
2 Select or clear the check box next to each alert.
Red Light and Speed Cameras
NOTICE
Garmin is not responsible for the accuracy of or the consequences of using a red light or speed camera database.
NOTE: This feature is not available for all regions or product models.
Rider Awareness Features and Alerts
Information about red light and speed camera locations is available in some areas for some product models. Go to garmin.com/speedcameras to check availability and compatibility, or to purchase a subscription or one-time update.
You can purchase a new region or extend an existing subscription at any time.
You can go to mygarmin.com
to update the camera database on your device. You should update your device frequently to receive the most up-to-date camera information.
For some devices and regions, basic red light or speed camera data may be included with your device. Included data does not include updates or a subscription.
Viewing Helmet Law Notifications
Helmet law and eye protection notifications may appear on your zūmo device the first time your device acquires satellites and when your device approaches a location with motorcycle safety rules.
NOTICE
Garmin recommends that all riders wear helmets for safety.
Helmet law notifications are for reference only, are subject to change, and are not intended to be considered legal advice.
Helmet law notifications are available in the U.S. and Canada only.
Select the notification to view more details.
Searching for Helmet Laws
You can search for helmet laws by state or province.
1 Select Apps > Helmet Guide.
2 Select a state or province.
Navigating to Your Destination
Routes
A route is a path from your current location to one or more destinations.
• The device calculates a recommended route to your destination based on the preferences you set, including the
route calculation mode ( Changing the Route Calculation
Mode, page 5 ) and avoidances (
).
• The device can automatically avoid roads that are not appropriate for the active vehicle profile.
• You can start navigating to your destination quickly using the recommended route, or you can select an alternate route
(
• If there are specific roads you need to use or avoid, you can
customize the route ( Shaping Your Route, page 6
).
• You can add multiple destinations to a route (
Location to Your Route, page 6 ).
Starting a Route
1 Select Where To?, and search for a location (
2 Select a location.
3 Select an option:
• To start navigating using the recommended route, select
Go!.
• To choose an alternate route, select , and select a route.
Alternate routes appear to the right of the map.
• To edit the course of the route, select > Edit Route, and add shaping points to the route (
).
The device calculates a route to the location and guides you using voice prompts and information on the map (
). A preview of the major roads in your route appears at the edge of the map for several seconds.
If you need to stop at additional destinations, you can add the locations to your route (
Adding a Location to Your Route, page 6 ).
Changing the Route Calculation Mode
1 Select Settings > Navigation > Calculation Mode.
2 Select an option:
• Select Faster Time to calculate routes that are faster to drive but can be longer in distance.
• Select Adventurous Route to calculate routes that prefer curvy roads.
• Select Off Road to calculate point-to-point routes (without roads).
• Select Shorter Distance to calculate routes that are shorter in distance but can take more time to drive.
Taking a Route Using Adventurous Routing
Your device can calculate routes that prefer curvy roads, hills, and fewer highways. This feature can provide a more enjoyable ride, but it may increase the time or distance to your destination.
NOTE: This feature is not available on all device models or for all map regions.
1 Select Settings > Navigation > Calculation Mode >
Adventurous Route > Save.
2 Select Adventurous Route Settings.
3 Use the slider to include more or fewer curves.
4 Use the slider to include more or fewer hills.
5 Use the slider to include more or fewer highways.
6
Start a route ( Starting a Route, page 5
).
Creating a Round-Trip Route
The device can create a round-trip route using a specified starting location and a distance, duration, or destination.
1 From the home screen, select Apps > Round Trip.
2 Select Start Location.
3 Select a location, and select Select.
4 Select Trip Attributes.
5 Select an option:
• Select Choose a Distance to plan your route by distance.
• Select Choose a Duration to plan your route based on time.
• Select Choose a Destination to plan your route based on a specified location.
6 Enter a distance, duration, or destination.
7 Select an option:
• If you entered a distance or duration, select Done >
Calculate.
• If you selected a destination, select Select.
8 Select a route, and select Go!.
Starting a Route by Using the Map
You can start route by selecting a location from the map.
1 Select View Map.
2 Drag and zoom the map to display the area to search.
3 If necessary, select to filter the displayed points of interest by category.
Location markers ( or a blue dot) appear on the map.
4 Select an option:
• Select a location marker.
Navigating to Your Destination 5
• Select a point, such as a street, intersection, or address location.
5 Select Go!.
Going Home
The first time you start a route home, the device prompts you to enter your home location.
1 Select Where To? > Go Home.
2 If necessary, enter your home location.
Editing Your Home Location Information
1 Select Where To? > Saved > Home.
2 Select .
3 Select > Edit.
4 Enter your changes.
5 Select Done.
Your Route on the Map
As you travel, the device guides you to your destination using voice prompts and information on the map. Instructions for your next turn or exit, or other actions appear across the top of the map.
À
Á
Â
Ã
Ä
Å
Æ
Ç
Next action in the route. Indicates the next turn, exit, or other action and the lane in which you should travel, if available.
Distance to the next action.
Name of the street or exit associated with the next action.
Route highlighted on the map.
Next action in the route. Arrows on the map indicate the location of upcoming actions.
Vehicle speed.
Name of the road on which you are traveling.
Estimated arrival time.
TIP: You can touch this field to change the information it shows
( Changing the Map Data Field, page 12 ).
Active Lane Guidance
As you approach a turn while navigating a route, a detailed simulation of the road appears beside the map, if available. A colored line indicates the proper lane for the turn.
À
Viewing Turns and Directions
While navigating a route, you can view upcoming turns, lane changes, or other directions for your route.
1 From the map, select an option:
• To view upcoming turns and directions as you navigate, select > Turns.
The map tool displays the next four turns or directions beside the map. The list updates automatically as you navigate the route.
• To view the complete list of turns and directions for the entire route, select the text bar at the top of the map.
2 Select a turn or direction (optional).
Detailed information appears. An image of the junction may appear for junctions on major roadways, if available.
Viewing the Entire Route on the Map
1 While navigating a route, select anywhere on the map.
2 Select .
Adding a Location to Your Route
Before you can add a location to your route, you must be
navigating a route ( Starting a Route, page 5
).
You can add locations to the middle or end of your route. For example, you can add a fuel station as the next destination in your route.
TIP: To create complex routes with multiple destinations or scheduled stops, you can use the trip planner to plan, schedule,
and save a trip ( Planning a Trip, page 7 ).
1 From the map, select > Where To?.
2 Search for a location (
Finding and Saving Locations, page 9 ).
3 Select a location.
4 Select Go!.
5 Select an option:
• To add the location as the next destination in your route, select Add As Next Stop.
• To add the location to the end of your route, select Add
As Last Stop.
• To add the location and edit the order of destinations in your route, select Add to Active Route.
The device re-calculates the route to include the added location and guides you to the destinations in order.
Shaping Your Route
Before you can shape your route, you must start a route
(
).
You can manually shape your route to change its course. This allows you to direct the route to use a certain road or go through a certain area without adding a destination to the route.
1 Touch anywhere on the map.
2 Select .
The device enters route shaping mode.
3 Select a location on the map.
TIP: You can select to zoom in on the map and select a more precise location.
The device recalculates the route to travel through the selected location.
4 If necessary, select an option:
• To add more shaping points to the route, select additional locations on the map.
• To remove a shaping point, select .
5 When you are finished shaping the route, select Go!.
Taking a Detour
You can take a detour for a specified distance along your route or detour around specific roads. This is useful if you encounter construction zones, closed roads, or poor road conditions.
1 From the map, select > Change Route.
6 Navigating to Your Destination
TIP: If the Change Route tool is not in the map tools menu,
you can add it ( Enabling Map Tools, page 11 ).
2 Select an option:
• To detour your route for a specific distance, select Detour
by Distance.
• To detour around a specific road on the route, select
Detour by Road.
• To find a new route, select Detour.
Stopping the Route
From the map, select > Stop.
Trip Planner
You can use the trip planner to create and save a trip, which you can navigate later. This can be useful for planning a delivery route, a vacation, or a road trip. You can edit a saved trip to further customize it, including reordering locations, optimizing the order of stops, adding scheduling information, and adding shaping points.
You can also use the trip planner to edit and save your active route.
Planning a Trip
A trip can include many destinations, and it must include at least a starting location and one destination. The starting location is the location from which you plan to start your trip. If you start navigating the trip from a different location, the device gives you the option to route to your starting location first. For a round trip, the starting location and final destination can be the same.
1 Select Apps > Trip Planner > > Create Trip.
2 Select Select Start Location.
3 Choose a location for your starting point, and select Select.
4 Select Select Destination.
5 Choose a location for a destination, and select Select.
6 Select Add Location to add more locations (optional).
7 After you have added all the necessary locations, select Next
> Save.
8 Enter a name, and select Done.
Navigating to a Saved Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select Go!.
4 Select the first location to navigate to, and select Start.
The device calculates a route from your current location to the selected location and then guides you to the remaining trip destinations in order.
Optimizing the Order of Destinations in a Trip
The device can automatically optimize the order of destinations in your trip to create a shorter, more efficient route. The starting location and final destination are not changed when you optimize the order.
While editing a trip, select > Optimize Order.
Editing and Reordering Locations in a Trip
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select a location.
4 Select an option:
• To move the location up or down, select , and drag the location to a new position in the trip.
• To add a new location after the selected location, select
.
• To remove the location, select .
Changing Routing Options for a Trip
You can customize how the device calculates the route when you start your trip.
1 Select Apps > Trip Planner.
2 Select a saved trip.
3 Select the vehicle profile icon, and select the vehicle you plan to use while navigating the trip (optional).
4 Select > Trip Settings.
5 Select an option:
• To add shaping points to your trip, select Shape Route, and follow the on-screen instructions (
).
• To change the calculation mode for the trip, select Route
Preference (
Changing the Route Calculation Mode, page 5 ).
When you start navigating the trip, the device automatically switches to the selected vehicle profile.
Scheduling a Trip
You can add scheduling information to each location in your trip, including the desired arrival time and layover duration at each location. This can help you plan your departure to reach locations in your trip on time.
1 Select Apps > Trip Planner.
2 Select a trip.
3 Select > Trip Settings > Edit Schedule.
4 Select a location, and follow the on-screen instructions to enter the schedule information.
TIP: If you need to schedule multiple locations in the trip, you should start from the beginning of the trip and work toward the end.
5 Repeat step 4 to enter schedule information for additional locations.
6 When finished, select Save.
When you navigate the trip, you should depart by the time shown under the starting point to reach your stops and destinations by the scheduled time. The schedule is an estimate only. Traffic conditions, construction, and other delays may affect your actual arrival times.
Sharing Trips
You can share trips with compatible Garmin devices using
Bluetooth wireless technology.
1 Place your device within 33 ft. (10 m) of a compatible Garmin device.
2 Select Apps > Trip Planner > > Share > Bluetooth.
3 Select a trip and select Done.
4 Select a device from the list and select OK.
Using Suggested Routes
Before you can use this feature, you must save at least one
location and enable the travel history feature ( Device and
Using the myTrends ™ feature, your device predicts your destination based on your travel history, the day of the week, and the time of day. After you have driven to a saved location several times, the location may appear in the navigation bar on the map, along with the estimated time of travel, and traffic information.
Select the navigation bar to view a suggested route to the location.
Navigating to Your Destination 7
Avoiding Delays, Tolls, and Areas
Avoiding Toll Roads
Your device can avoid routing you through areas that require tolls, such as toll roads, toll bridges, or congestion areas. The device may still include a toll area in your route if no other reasonable routes are available.
1 Select Settings > Navigation.
2 Select an option:
NOTE: The menu changes based on your area and the map data on your device.
• Select Toll Roads.
• Select Tolls and Fees > Toll Roads.
3 Select an option:
• To be asked each time before routing through a toll area, select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4 Select Save.
Avoiding Toll Stickers
NOTE: This feature is not available in all areas.
The map data on your device may contain detailed toll sticker information for some countries. You can avoid or allow toll stickers for each country.
1 Select Settings > Navigation > Tolls and Fees > Toll
Stickers.
2 Select a country.
3 Select an option:
• To be asked each time before routing through a toll area, select Always Ask.
• To always avoid tolls, select Avoid.
• To always allow tolls, select Allow.
4 Select Save.
Avoiding Road Features
1 Select Settings > Navigation > Avoidances.
2 Select the road features to avoid on your routes, and select
Save.
Custom Avoidances
Custom avoidances allow you select specific areas or sections of road to avoid. When the device calculates a route, it avoids these areas and roads unless no other reasonable route is available.
Avoiding a Road
1 Select Settings > Navigation > Custom Avoidances.
2 Select Add Avoid Road.
3 Select the starting point of the section of road to avoid, and select Next.
4 Select the ending point of the road section, and select Next.
5 Select Done.
Avoiding an Area
1 Select Settings > Navigation > Custom Avoidances.
2 If necessary, select Add Avoidance.
3 Select Add Avoid Area.
4 Select the upper-left corner of the area to avoid, and select
Next.
5 Select the lower-right corner of the area to avoid, and select
Next.
The selected area is shaded on the map.
6 Select Done.
8
Disabling a Custom Avoidance
You can disable a custom avoidance without deleting it.
1 Select Settings > Navigation > Custom Avoidances.
2 Select an avoidance.
3 Select > Disable.
Deleting Custom Avoidances
1 Select Settings > Navigation > Custom Avoidances.
2 Select an option:
• To delete all custom avoidances, select .
• To delete one custom avoidance, select the avoidance, and select > Delete.
Navigating Off Road
If you are not following roadways as you navigate, you can use
Off Road mode.
1 Select Settings > Navigation.
2 Select Calculation Mode > Off Road > Save.
The next route will be calculated as a straight line to the location.
Fuel Tracking
You can set your device to estimate your fuel usage, warn you when you approach the maximum estimated fuel distance, and suggest fuel stops based on your estimated fuel range. When fuel tracking is enabled, indicates the current fuel status.
White: Fuel tracking is disabled, or the device is not connected to the motorcycle mount.
Green: The estimated fuel range is above the fuel tank warning level.
Orange: The estimated fuel range is below the fuel tank warning level.
Red: The estimated distance remaining on the tank is 0.
Enabling Fuel Tracking
Before you can enable fuel tracking, the device must be in motorcycle mode or off road mode and placed in the motorcycle mount.
When you enable fuel tracking, a fuel gauge appears on the trip
computer ( Viewing the Trip Information Page, page 12 ).
1 Fill your fuel tank.
2 Select Apps > Fuel Settings > Fuel Tracking.
3 Select Distance Per Tank.
4 Enter the distance the vehicle travels on a tank of gas and select Done.
Setting a Low Fuel Warning
You can set the device to warn you when the tank is low on fuel.
NOTE: The device must be connected to the motorcycle mount to give low fuel warnings.
1
Enable fuel tracking ( Enabling Fuel Tracking, page 8
).
2 Select Fuel Tank Warning.
3 Enter a distance, and select Done.
When you have only enough fuel left to travel the distance you entered, a low fuel warning appears on the map page.
Resetting the Fuel Tank Mileage
When you refill your fuel tank, you should reset the fuel tank mileage on your device to more accurately track your remaining fuel.
Select Apps > Fuel Settings > Reset Fuel Tank.
Navigating to Your Destination
Enabling Dynamic Fuel Stops
Before you can enable dynamic fuel stops, the device must be in motorcycle mode, placed in the motorcycle mount, and fuel tracking must be enabled.
You can set the device to suggest fuel stops based on your estimated fuel range.
Select Apps > Fuel Settings > Dynamic Fuel Stops.
Finding and Saving Locations
The maps loaded in your device contain locations, such as restaurants, hotels, auto services, and detailed street information. The Where To? menu helps you find your destination by providing several methods to browse, search, and save this information.
• Enter search terms to quickly search all location information
(
Finding a Location Using the Search Bar, page 9 ).
• Browse or search pre-loaded points of interest by category
(
• Search and check into Foursquare ® points of interest
(
Searching Foursquare Points of Interest, page 10
).
• Use search tools to find specific locations, such as
addresses, intersections, or geographic coordinates ( Search
).
• Search near a different city or area ( Changing the Search
).
• Save your favorite locations to find them quickly in the future
(
• Return to recently found locations ( Viewing Recently Found
).
Finding a Location Using the Search Bar
You can use the search bar to search for locations by entering a category, brand name, address, or city name.
1 Select Where To?.
2 Select Enter Search in the search bar.
3 Enter all or part of the search term.
Suggested search terms appear below the search bar.
4 Select an option:
• To search for a type of business, enter a category name
(for example, "movie theaters").
• To search for a business name, enter all or part of the name.
• To search for an address near you, enter the house number and street name.
• To search for an address in another city, enter the house number, street name, city, and state.
• To search for a city, enter the city and state.
• To search for coordinates, enter latitude and longitude coordinates.
5 Select an option:
• To search using a suggested search term, select the term.
• To search using the text you entered, select .
6 If necessary, select a location.
Viewing Search Results on the Map
You can view the results of a location search on the map instead of in a list.
1 From the location search results, select .
The nearest location in your search results appears on the map. indicates the locations of other search results.
2 Select one or more options:
• To view more search results, touch and drag the map.
• To select another location, select .
• To view details and routes for the selected location, select the location description at the bottom of the map.
• To start navigation to the selected location, select Go!.
Changing the Search Area
By default, the device searches near your current location. You can also search other areas, such as near your destination, near another city, or along your active route.
1 From the main menu, select Where To?.
2 Select .
3 Select an option.
Points of Interest
A point of interest is a place that you may find useful or interesting. Points of interest are organized by category and can include popular travel destinations such as gas stations, restaurants, hotels, and entertainment venues.
Finding a Location by Category
1 Select Where To?.
2 Select a category, or select Categories.
3 If necessary, select a subcategory.
4 Select a location.
Searching Within a Category
After you have performed a search for a point of interest, certain categories may display a Quick Search list that shows the last four destinations you selected.
1 Select Where To? > Categories.
2 Select a category.
3 Select an option:
• Select a destination from the quick search list on the right side of the screen.
The quick search list provides a list of recently found locations in the selected category.
• Select a subcategory, if necessary, and select a destination.
Navigating to Points of Interest Within a Venue
You can create a route to a point of interest (POI) within a larger venue, such as a store in a shopping mall or a specific terminal in an airport.
1 Select Where To? > Enter Search.
2 Select an option:
• To search for the venue, enter the name or address of the venue, select , and go to step 3.
• To search for the POI, enter the name of the POI, select
, and go to step 5.
3 Select the venue.
A list of categories appears below the venue, such as restaurants, car rentals, or terminals.
4 Select a category.
5 Select the POI, and select Go!.
The device creates a route to the parking area or venue entrance closest to the POI. When you arrive at the destination, a checkered flag indicates the recommended parking area. A labeled point indicates the location of the POI within the venue.
Exploring a Venue
You can view a list of all points of interest located within each venue.
1 Select a venue.
Finding and Saving Locations 9
2 Select > Explore this Venue.
Foursquare
Foursquare is a location-based social network. Your device includes pre-loaded Foursquare points of interest, which are indicated by the Foursquare logo in your location search results.
Searching Foursquare Points of Interest
You can search for Foursquare points of interest loaded on your device.
Select Where To? > Categories > Foursquare.
Search Tools
Search tools allow you to search for specific types of locations by responding to on-screen prompts.
Finding an Address
NOTE: The order of the steps may change depending on the map data loaded on your device.
1 Select Where To?.
2 If necessary, select Searching Near to change the search
area ( Changing the Search Area, page 9
).
3 Select Address.
4 Follow the on-screen instructions to enter address information.
5 Select the address.
Finding an Intersection
You can search for an intersection or junction between two streets, highways, or other roads.
1 Select Where To? > Categories > Intersections.
2 Follow the on-screen instructions to enter street information.
3 Select the intersection.
Finding a City
1 Select Where To? > Categories > Cities.
2 Select an option:
• Select a city from the list of nearby cities.
• To search near another location, select Searching Near
(
Changing the Search Area, page 9
).
• To search for a city by name, select Enter Search, enter a city name, and select .
Finding a Location Using Coordinates
You can find a location using latitude and longitude coordinates.
This can be helpful when geocaching.
1 Select Where To? > Categories > Coordinates.
2 If necessary, select , and change the coordinate format or datum.
3 Enter the latitude and longitude coordinates.
4 Select View on Map.
Viewing Recently Found Locations
Your device stores a history of the last 50 locations you have found.
Select Where To? > Recent.
Clearing the List of Recently Found Locations
Select Where To? > Recent > > Clear > Yes.
Finding Your Last Parking Spot
When you disconnect the device from vehicle power while the device is on, your current location is saved as a parking spot.
Select Apps > Last Spot.
Viewing Current Location Information
You can use the Where Am I? page to view information about your current location. This feature is helpful if you need to tell emergency personnel your location.
From the map, select the vehicle.
Finding Emergency Services and Fuel
You can use the Where Am I? page to find the nearest hospitals, police stations, and fuel stations.
1 From the map, select the vehicle.
2 Select Hospitals, Police Stations, or Fuel.
A list of locations for the selected service appears, with the nearest locations at the top.
3 Select a location.
4 Select an option:
• To navigate to the location, select Go!
• To view the phone number and other location details, select .
Getting Directions to Your Current Location
If you need to tell another person how to get to your current location, your device can give you a list of directions.
1 From the map, select the vehicle.
2 Select > Directions to Me.
3 Select a starting location.
4 Select Select.
Adding a Shortcut
You can add shortcuts to the Where To? menu. A shortcut can point to a location, a category, or a search tool.
The Where To? menu can contain up to 36 shortcut icons.
1 Select Where To? > Add Shortcut.
2 Select an item.
Removing a Shortcut
1 Select Where To? > > Remove Shortcut(s).
2 Select a shortcut to remove.
3 Select the shortcut again to confirm.
4 Select Save.
Saving Locations
Saving a Location
1 Search for a location (
Finding a Location by Category, page 9 ).
2 From the search results, select a location.
3 Select .
4 Select Save.
5 If necessary, enter a name, and select Done.
Saving Your Current Location
1 From the map, select the vehicle icon.
2 Select Save.
3 Enter a name, and select Done.
4 Select OK.
Editing a Saved Location
1 Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select > Edit.
10 Finding and Saving Locations
6 Select an option:
• Select Name.
• Select Phone Number.
• Select Categories to assign categories to the saved location.
• Select Change Map Symbol to change the symbol used to mark the saved location on a map.
7 Edit the information.
8 Select Done.
Assigning Categories to a Saved Location
You can add custom categories to organize your saved locations.
NOTE: Categories appear in the saved locations menu after you have saved at least 12 locations.
1 Select Where To? > Saved.
2 Select a location.
3 Select .
4 Select > Edit > Categories.
5 Enter one or more category names, separated by commas.
6 If necessary, select a suggested category.
7 Select Done.
Deleting a Saved Location
NOTE: Deleted locations cannot be recovered.
1 Select Where To? > Saved.
2 Select > Delete Saved Places.
3 Select the box next to the saved locations to delete, and select Delete.
Sharing a Saved Location
After you save a location, you can share it with other compatible
Garmin devices using Bluetooth wireless technology or a memory card.
1 Select Where To? > Saved.
2 If necessary, select a category.
3 Select a location.
4 Select .
5 Select > Share.
6 Follow the on-screen instructions to share location information.
You can use the map to navigate a route ( Your Route on the
) or to view a map of your surroundings when no route is active.
1 Select View Map.
2 Touch anywhere on the map.
3 Select an option:
• Drag the map to pan left, right, up, or down.
• To zoom in or out, select or .
• To switch between North Up and 3-D views, select .
• To filter the displayed points of interest by category, select
.
• To start a route, select a location on the map, and select
Go! (
Starting a Route by Using the Map, page 5 ).
Map Tools
Using the Map
Map tools provide quick access to information and device functions while you view the map. When you activate a map tool, it appears in a panel at the edge of the map.
Using the Map
Stop: Stops navigation of the active route.
Change Route: Allows you to take a detour or skip locations in your route.
Up Ahead: Displays upcoming locations along the route or the
road on which you are traveling ( Up Ahead, page 11 ).
Turns: Displays a list of upcoming turns in your route ( Viewing
Turns and Directions, page 6 ).
Trip Data: Displays customizable trip data, such as speed or
mileage ( Viewing Trip Data from the Map, page 12
).
Volume: Adjusts the master audio volume.
Brightness: Adjusts the screen brightness.
Phone: Displays a list of recent phone calls from your connected phone, and displays in-call options while a phone call is active (
Using In-Call Options, page 13
).
Viewing a Map Tool
1 From the map, select .
2 Select a map tool.
The map tool appears in a panel at the edge of the map.
3 When you are done using the map tool, select .
Enabling Map Tools
By default, only the most commonly used map tools are enabled in the map tools menu. You can add up to 12 tools to the menu.
1 From the map, select > .
2 Select the check box next to each tool to add.
3 Select Save.
Up Ahead
The Up Ahead tool provides information about upcoming locations along your route or the road on which you are traveling. You can view upcoming points of interest, such as restaurants, fuel stations, or rest areas. When traveling on a highway, you can also view information and available services for upcoming exits and cities, similar to the information on highway road signs.
You can customize three categories to show in the Up Ahead tool.
Viewing Upcoming Locations
1 From the map, select > Up Ahead.
2 Select an option:
• To view the next upcoming location in each category, select , if necessary.
• To view information and available services for upcoming highway exits or cities, select .
NOTE: This option is available only while you are traveling on a highway or when your route includes a highway.
3 Select an item to view a list of locations for that category, exit, or city.
Customizing the Up Ahead Categories
You can change the location categories that appear in the Up
Ahead tool.
1 From the map, select > Up Ahead.
2 Select a category.
3 Select .
4 Select an option:
• To move a category up or down in the list, select and drag the arrow next to the category name.
• To change a category, select the category.
• To create a custom category, select a category, select
Custom Search, and enter the name of a business or category.
11
5 Select Done.
Trip Information
Viewing Trip Data from the Map
Before you can view trip data on the map, you must add the tool to the map tools menu (
).
From the map, select > Trip Data.
Customizing the Trip Data Fields
Before you can customize the data that appears in the trip data map tool, you must add the trip data tool to the map tools menu
(
).
1 From the map, select > Trip Data.
2 Select a trip data field.
3 Select an option.
The new trip data field appears in the trip data map tool.
Viewing the Trip Information Page
The trip information page displays your speed and provides statistics about your trip.
NOTE: If you make frequent stops, leave the device turned on, so it can accurately measure elapsed time during the trip.
From the map, select Speed.
Viewing the Trip Log
Your device keeps a trip log, which is a record of the path you have traveled.
1 Select Settings > Map & Vehicle > Map Layers.
2 Select the Trip Log check box.
Resetting Trip Information
1 From the map, select Speed.
2 Select > Reset Field(s).
3 Select an option:
• When not navigating a route, select Select All to reset every data field except the speedometer, on the first page.
• Select Reset Trip Data to reset the information on the trip computer.
• Select Reset Max. Speed to reset the maximum speed.
• Select Reset Trip B to reset the odometer.
Customizing the Map
Customizing the Map Layers
You can customize which data appear on the map, such as icons for points of interest and road conditions.
1 Select Settings > Map & Vehicle > Map Layers.
2 Select the layers to include on the map, and select Save.
Changing the Map Data Field
1 From the map, select a data field.
NOTE: You cannot customize Speed.
2 Select a type of data to display.
Changing the Map Perspective
1 Select Settings > Map & Vehicle > Driving Map View.
2 Select an option:
• Select Track Up to display the map in two dimensions (2-
D), with your direction of travel at the top.
• Select North Up to display the map in 2-D with north at the top.
• Select 3-D to display the map in three dimensions.
3 Select Save.
Bluetooth Connected Features
The device has several Bluetooth connected features for your compatible smartphone.
Hands-free calling: Allows you to place and receive phone calls using your device, and allows you to use the device as a hands-free speaker phone. If the selected language supports the voice command feature, you can place and answer calls using voice commands.
Media streaming: Streams audio from your smartphone to your headset and provides Bluetooth media controls on your zūmo device.
Bluetooth Feature Requirements
Some features require a phone, a headset, or a specific app on your smartphone.
Feature
Hands free calling
Media streaming
Requires
Paired phone and headset.
Paired smartphone and headset.
Pairing Your Phone and Headset
You must pair your zūmo device with your phone and Bluetooth headset to use several Bluetooth features. After the devices are paired, they connect automatically when they are turned on and within range.
1 On your phone, enable Bluetooth wireless technology, and set the phone to be discoverable.
See your phone owner's manual for more information.
2 Place the zūmo device and your phone within 3 m (10 ft.) of each other.
3 On the zūmo device, select Settings > Bluetooth > .
4 Follow the on-screen instructions to pair your phone with your device.
5 On the zūmo device, select .
TIP: If the initial Bluetooth settings screen does not appear, you can select Settings > Bluetooth > Search for Devices to pair your headset.
6 Follow the on-screen instructions to pair your headset with your device.
Bluetooth Feature Status Icons
Status icons appear in the Bluetooth settings next to each paired device.
Select Settings > Bluetooth.
• A gray icon indicates the feature is disabled or disconnected for that device.
• A colored icon indicates the feature is connected and active for that device.
Hands-free calling
Media streaming
Headset is connected
Enabling or Disabling Bluetooth Features for
Your Headset
By default, all compatible Bluetooth features are enabled when you pair your headset. You can enable or disable certain features.
1 Select Settings > Bluetooth.
2 Select the headset name.
3 Select an option:
• To disconnect the headset, clear the Headset check box.
12 Bluetooth Connected Features
• To disable audio from streaming media, clear the Media
Audio check box.
Hands-Free Calling
NOTE: Bluetooth wireless technology and hands-free calling are not available on all models, or for all languages and regions.
NOTE: While most phones are supported and can be used, it cannot be guaranteed that a particular phone can be used. All features may not be available for your phone.
Using Bluetooth wireless technology, your device can connect to your mobile phone to become a hands-free device. While connected, you can place or receive calls using your device.
Placing a Call
Dialing a Number
1 Select Apps > Phone > Dial.
2 Enter the number.
3 Select Dial.
Calling a Contact in Your Phone Book
Your phone book is loaded from your phone to the device each time your phone and the device connect. It may take a few minutes for the phone book to be available. Some phones do not support this feature.
1 Select Apps > Phone > Phone Book.
2 Select a contact.
3 Select Call.
Calling a Location
1 Select Apps > Phone > Browse Categories.
2 Select a point of interest.
3 Select Call.
Receiving a Call
When you receive a call, select Answer or Ignore.
Using the Call History
Your call history is loaded from your phone to the device each time your phone and the device connect. It may take a few minutes for the call history to be available. Some phones do not support this feature.
1 Select Apps > Phone > Call History.
2 Select a category.
A list of calls appears, with the most recent calls at the top.
3 Select a call.
Using In-Call Options
While on a call, you can select in-call options from the map.
• To transfer audio to your phone, select .
TIP: You can use this feature if you want to turn off your device and remain on the call, or if you need privacy.
• To use the dial pad, select .
TIP: You can use this feature to use automated systems, such as voice mail.
• To mute the microphone, select .
• To hang up, select .
Saving a Home Phone Number
TIP: After you save a home number, you can edit the home number by editing “Home” in your list of saved locations (
1 Select Apps > Phone > > Set Home Number.
2 Enter your phone number.
3 Select Done.
Calling Home
Before you can call home, you must enter a phone number for your home location.
Select Apps > Phone > Call Home.
Disconnecting a Bluetooth Device
You can temporarily disconnect a Bluetooth device without deleting it from the paired devices list. The Bluetooth device can connect to your zūmo device automatically in the future.
1 Select Settings > Bluetooth.
2 Select the device to disconnect.
3 Clear the check box next to the name of your paired device.
Deleting a Paired Phone
You can delete a paired phone to prevent it from automatically connecting to your device in the future.
1 Select Settings > Bluetooth.
2 Select the phone, and select Unpair device.
Using the Apps
Media Player
The media player can play music or audio from these sources.
• Music files stored on your zūmo device.
• Music files stored on a phone or media player connected to the motorcycle mount USB port.
• Bluetooth audio from a paired phone.
Adding the Media Player Tool to the Map
The media player map tool enables you to control the media player from your map.
1 Select Settings > Map & Vehicle > Map Tools > Media
Player.
2 Open the map.
3 Select > Media Player.
The media player controls appear on the map.
Changing the Media Source
You can change the source from which media is played on your device.
1 Select Apps > Media Player > .
2 Select a media source.
Tracks
A track is a recording of your path. The track log contains information about the recorded path, including time, location, and elevation information.
Viewing Track Information
1 Select Apps > Tracks > Active.
2 Select a track.
The track is displayed on the map.
3 Select .
4 Select an option:
• To save the track, select Save Track.
• To save the track as a trip, select Save as Trip.
• To view an elevation plot of the track, select Elevation
Profile.
Using the Apps 13
TracBack
®
Following Your Recent Track
The TracBack feature records a track of your recent movement.
You can retrace your recent track back to where you started.
1 Select Apps > TracBack.
Your recent track appears on the map.
2 Select Go!.
Saving Your Recent Track as a Trip
You can save your recent track as a trip, which you can navigate
later using the trip planner ( Navigating to a Saved Trip, page 7
).
1 Select TracBack.
Your recent track appears on the map.
2 Select > Save as Trip.
3 Enter a name, and select Done.
Tire Pressure
WARNING
Use of the Tire Pressure Monitor System is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger the low tire pressure alert. Failure to maintain proper tire pressure can result in loss of control of the vehicle, which may lead to serious personal injury or death.
The Garmin Tire Pressure Monitor System is available as a separate accessory. The tire pressure feature is not compatible with all zūmo models. Go to www.garmin.com/zumo for accessory and compatibility information.
Setting Up the Tire Pressure Sensors
Before you can set up the tire pressure sensors, you must have the battery and the numerical stickers included with each sensor. You also must have a compatible zūmo device.
The sensors communicate wirelessly with your compatible zūmo device. You can monitor tire pressure and receive low-pressure alerts on your zūmo device.
1 Remove the cap
À counter-clockwise.
from the sensor
Á
by rotating the cap
2 If you have already installed the battery in the sensor, remove the battery.
3 On your zūmo device, select Apps > Tire Pressure.
4 Select a vehicle profile that matches the tire configuration of your vehicle.
5 Bring the sensor close to the zūmo device.
6 On your zūmo device, select the number next to the tire to which the sensor will be paired.
7 Within 30 seconds, on the sensor, insert the battery the battery holder
Ã
with the positive side facing up.
Â
into
The zūmo device searches for the sensor and displays a confirmation message when the sensor pairs successfully.
TIP: If the sensor does not pair successfully, you should remove the sensor battery, and repeat steps 6 and 7.
8 Enter the recommended pressure for the tire.
9 Enter the minimum pressure for the tire.
The zūmo device triggers a low-pressure alert when the sensor reports a tire pressure reading lower than this value.
10 Replace and fully tighten the cap on the sensor.
11 On the sensor, affix the numerical sticker that corresponds to the tire number you selected in step 6.
12 Repeat this procedure for each remaining sensor.
Installing the Sensors on Your Tires
WARNING
The Tire Pressure Monitor System is for use with metal tire valve stems only. Installation of the Tire Pressure Sensors on nonmetal tire valve stems may cause tire and/or tire valve stem damage which could result in serious personal injury or death.
NOTICE
To prevent possible damage to the sensors or vehicle, ensure each installed sensor does not interfere with the vehicle brakes, suspension components, or other installed equipment. If an installed sensor interferes with any installed equipment on the vehicle, do not operate the vehicle with the sensor installed.
To prevent possible tire vibration or uneven tire wear on some vehicles, it may be necessary to balance the vehicle tires after installing the sensor.
Before you install the sensors on your tires, you should set up the sensors with your zūmo device.
1 Remove the existing valve stem caps from your vehicle tires.
2 On your zūmo device, select Apps > Tire Pressure to view the vehicle profile diagram.
3 Install the sensors onto the tire valve stems by tightening them clockwise.
NOTE: You must install each sensor onto the correct tire based on the vehicle profile diagram and the numerical stickers affixed to the sensors during the setup process.
4 Rotate the wheels by hand to verify the sensors have adequate clearance and do not interfere with vehicle equipment.
Tire Pressure Alerts
The device alerts you using pop-up messages, icons on the map, and symbols in the tire pressure app.
When an alert exists for a sensor, the number next to the corresponding tire appears red in the tire pressure app. The symbols below the number appear red to indicate the active alerts for that sensor.
14 Using the Apps
Low tire pressure
Low sensor battery
Sensor not connected
Tire Pressure Sensor Sleep Mode
When you park your vehicle and turn off your zūmo device, the tire pressure sensor enters a power-saving sleep mode after several minutes. The sensor does not transmit information to the zūmo device while in sleep mode. This can cause your zūmo device to report the sensor is disconnected.
The next time your vehicle moves, the sensor exits sleep mode and automatically reconnects to the zūmo device. It may take up to 30 seconds to reconnect.
Using the Compass
NOTE: You must be moving for the compass to determine your direction.
You can navigate using a GPS compass.
Select Apps > Compass.
VIRB
®
Remote
The VIRB remote function allows you to control your VIRB action camera using your device. Go to www.garmin.com/VIRB to purchase a VIRB action camera.
Controlling a VIRB Action Camera
Before you can use the VIRB remote function, you must enable the remote setting on your VIRB camera. See the VIRB Series
Owner's Manual for more information.
1 Turn on your VIRB camera.
2 On your zūmo device, select Apps > VIRB Remote >
Connect.
3 Wait while the device connects to your VIRB camera.
4 Select an option:
• Select Start Recording to record video.
• Select Stop Recording to stop recording video.
• Select Snapshot to take a photograph.
Logging Service History
You can log the date and odometer reading when service or maintenance is performed on your vehicle. The device provides several service categories, and you can add custom categories
(
Adding Service Categories, page 15 ).
1 Select Apps > Service History.
2 Select a service category.
3 Select Add Record.
4 Enter the odometer reading, and select Next.
5 Enter a comment (optional).
6 Select Done.
Adding Service Categories
1 Select Apps > Service History.
2 Select > Add Category.
3 Enter a category name, and select Done.
Deleting Service Categories
When you delete a service category, all service records in the category are also deleted.
1 Select Apps > Service History.
2 Select > Delete Categories.
3 Select the service categories to delete.
4 Select Delete.
Renaming Service Categories
1 Select Apps > Service History.
2 Select the category to be renamed.
3 Select > Rename Category.
4 Enter a name, and select Done.
Deleting Service Records
1 Select Apps > Service History.
2 Select a service category.
3 Select > Delete Records.
4 Select the service records to be deleted.
5 Select Delete.
Editing a Service Record
You can edit the comment, odometer reading, and date of a service record.
1 Select Apps > Service History.
2 Select a category.
3 Select a field.
4 Enter the new information, and select Done.
Viewing Help Files
Select Apps > Help to view the full owner's manual.
Searching Help Topics
Select Apps > Help > .
Viewing Previous Routes and Destinations
Before you can use this feature, you must enable the travel
history feature ( Device and Privacy Settings, page 16 ).
You can view your previous routes and places you have stopped on the map.
Select Apps > Where I've Been.
Customizing the Device
Map and Vehicle Settings
Select Settings > Map & Vehicle.
Vehicle: Sets the icon that represents your position on the map.
Go to www.garmingarage.com
for more icons.
Driving Map View: Sets the perspective on the map.
Map Detail: Sets the level of detail on the map. More detail may cause the map to draw slower.
Map Theme: Changes the color of the map data.
Map Tools: Sets the shortcuts that appear in the map tools menu.
Map Layers: Sets the data that appears on the map page
(
Customizing the Map Layers, page 12
).
Audible Rider Alerts: Enables an audible alert for each type of rider alert (
Rider Awareness Features and Alerts, page 4 .
Auto Zoom: Automatically selects the zoom level for optimal use of your map. When disabled, you must zoom in or out manually.
myMaps: Sets which installed maps the device uses.
Enabling or Disabling Rider Alerts
You can turn off individual audible rider alerts. Visual alerts appears even when the audible alert is disabled.
1 Select Settings > Map & Vehicle > Audible Rider Alerts.
2 Select or clear the check box next to each alert.
Enabling Maps
You can enable map products installed on your device.
Customizing the Device 15
TIP: To purchase additional map products, go to http://buy.garmin.com
.
1 Select Settings > Map & Vehicle > myMaps.
2 Select a map.
Navigation Settings
Select Settings > Navigation.
Route Preview: Shows a preview of the major roads in your route when you start navigation.
Calculation Mode: Sets the route calculation method.
Off-Route Recalculation: Sets recalculation preferences when navigating away from an active route.
Fatigue Warning: Alerts you when you have been driving for a long period without a break.
Avoidances: Sets road features to avoid on a route.
Custom Avoidances: Allows you to avoid specific roads or areas.
Toll Roads: Sets preferences for avoiding toll roads.
Tolls and Fees: Sets preferences for avoiding toll roads and toll stickers.
NOTE: This feature is not available in all areas.
Restricted Mode: Disables all functions that require significant operator attention and could become a distraction while driving.
GPS Simulator: Stops the device from receiving a GPS signal, and saves battery power.
Calculation Mode Settings
Select Settings > Navigation > Calculation Mode.
The route calculation is based on road speeds and vehicle acceleration data for a given route.
Faster Time: Calculates routes that are faster to drive but can be longer in distance.
Shorter Distance: Calculates routes that are shorter in distance but can take more time to drive.
Off Road: Calculates a direct line from your location to your destination.
Adventurous Route: Calculates routes that prefer curvy roads.
NOTE: This feature is not available in all areas.
Setting a Simulated Location
If you are indoors or not receiving satellite signals, you can use the GPS to set a simulated location.
1 Select Settings > Navigation > GPS Simulator.
2 From the main menu, select View Map.
3 Tap the map twice to select an area.
The address of the location appears at the bottom of the screen.
4 Select the location description.
5 Select Set Location.
Bluetooth Settings
Select Settings > Bluetooth.
Bluetooth: Enables Bluetooth wireless technology.
Search for Devices: Searches for nearby Bluetooth devices.
Friendly Name: Allows you to enter a friendly name that identifies your device on other devices with Bluetooth wireless technology.
Disabling Bluetooth
1 Select Settings > Bluetooth.
16
2 Select Bluetooth.
Display Settings
Select Settings > Display.
Orientation: Allows you to set the display to portrait (vertical) or landscape (horizontal).
Color Mode: Allows you to select day or night color mode. If you select the Auto option, the device automatically switches to day or night colors based on the time of day.
Brightness: Allows you to adjust the display brightness.
Display Timeout: Allows you to set the amount of idle time before your device enters sleep mode while using battery power.
Screenshot: Allows you to take a picture of the device screen.
Screenshots are saved in the Screenshot folder of the device storage.
Units and Time Settings
To open the Units and Time settings page, from the main menu, select Settings > Units & Time.
Current Time: Sets the device time.
Time Format: Allows you to select a 12-hour, 24-hour, or UTC display time.
Units: Sets the unit of measure used for distances.
Position Format: Sets the coordinate format and datum used for geographical coordinates.
Setting the Time
1 From the main menu, select the time.
2 Select an option:
• To set the time automatically using GPS information, select Automatic.
• To set the time manually, drag the numbers up or down.
Language and Keyboard Settings
To open the Language and Keyboard settings, from the main menu, select Settings > Language & Keyboard.
Voice Language: Sets the language for voice prompts.
Text Language: Sets all on-screen text to the selected language.
NOTE: Changing the text language does not change the language of user-entered data or map data, such as street names.
Keyboard Language: Enables keyboard languages.
Keyboard Layout: Sets the keyboard layout.
Proximity Alerts Settings
NOTE: You must have custom points of interest (POIs) loaded for proximity points alerts to display.
NOTE: This feature is not available in all areas.
Select Settings > Proximity Alerts.
Audio: Sets the style of alert that plays when you approach proximity points.
Alerts: Sets the type of proximity points for which alerts are played.
Device and Privacy Settings
To open the device settings, select Settings > Device.
About: Displays the software version number, the unit ID number, and information on several other software features.
EULAs: Displays the end-user license agreements.
NOTE: You need this information when you update the system software or purchase additional map data.
Customizing the Device
Position Reporting: Shares your position information with
Garmin to improve content.
Travel History: Allows the device to record information for the myTrends, Where I’ve Been, and Trip Log features.
Clear Travel History: Clears your travel history for the myTrends, Where I’ve Been, and Trip Log features.
Restoring Settings
You can restore a category of settings or all settings to the factory default values.
1 Select Settings.
2 If necessary, select a settings category.
3 Select > Restore.
Device Information
Specifications
Water resistance
Operating temperature range
Charging temperature range
IEC 60529 IPX7
From -20° to 55°C (from -4° to 131°F)
From 0° to 45°C (from 32° to 113°F)
Power input (CLA, motorcycle, or external power)
Battery life
From 12 to 24 Vdc
Battery type
Battery voltage range
Up to 4 hr., depending on usage and settings
Lithium-ion battery
From 3.5 to 4.1 V
Radio frequency protocol 2.4 GHz ANT+ ® protocol
wireless communications
2.4 GHz Bluetooth wireless technology
*The device withstands incidental exposure to water of up to 1 m for up to 30 min. For more information, go to www.garmin.com
/waterrating .
Charging the Device
NOTE: This Class III product shall be powered by an LPS power supply.
You can charge the battery in the device using any of these methods.
• Install the device in the mount, and connect the mount to vehicle power.
NOTICE
Do not connect the device directly to the vehicle power cable.
• Connect the device to a computer using a USB cable.
The device may charge slowly when connected to a computer. Some portable computers may not charge the device.
• Connect the device to an optional power adapter accessory, such as a wall power adapter.
You can purchase an approved Garmin AC-DC adapter suitable for home or office use from a Garmin dealer or www.garmin.com
.
Do not store the device where prolonged exposure to extreme temperatures can occur, because it can cause permanent damage.
Never use a hard or sharp object to operate the touchscreen, or damage may result.
Cleaning the Outer Casing
NOTICE
Avoid chemical cleaners and solvents that can damage plastic components.
1 Clean the outer casing of the device (not the touchscreen) using a cloth dampened with a mild detergent solution.
2 Wipe the device dry.
Cleaning the Touchscreen
1 Use a soft, clean, lint-free cloth.
2 If necessary, lightly dampen the cloth with water.
3 If using a dampened cloth, turn off the device and disconnect the device from power.
4 Gently wipe the screen with the cloth.
Avoiding Theft
• Remove the device and mount from sight when not in use.
• Remove the residue left on the windshield by the suction cup.
• Do not keep your unit in the glove compartment.
• Register your device at http://my.garmin.com
.
Resetting the Device
You can reset your device if it stops functioning.
Hold the power key for 12 seconds.
Removing the Device, Mount, and Suction
Cup
Removing the Device from the Mount
1 Press the release tab or button on the mount.
2 Tilt the device forward.
Removing the Mount from the Suction Cup
1 Turn the device mount to the right or left.
2 Apply pressure until the socket on the mount releases the ball on the suction cup.
Removing the Suction Cup from the Windshield
1 Flip the lever on the suction cup toward you.
2 Pull the tab on the suction cup toward you.
Changing the Fuse in the Vehicle Power
Cable
NOTICE
When replacing the fuse, do not lose any of the small pieces and make sure they are put back in the proper position. The vehicle power cable does not work unless it is assembled correctly.
If your device does not charge in your vehicle, you may need to replace the fuse located at the tip of the vehicle adapter.
1 Rotate the end piece
À
counter clockwise to unlock it.
Device Maintenance
Device Care
Avoid dropping your device.
NOTICE
TIP: You may need to use a coin to remove the end piece.
Device Information 17
2 Remove the end piece, the silver tip
Á
, and the fuse
Â
.
3 Insert a new fast-blow fuse that has the same current, such as 1 A or 2 A.
4 Place the silver tip in the end piece.
5 Push in the end piece and rotate it clockwise to lock it back into the vehicle power cable
Ã
.
Troubleshooting
The suction cup will not stay on my windshield
1 Clean the suction cup and windshield with rubbing alcohol.
2 Dry with a clean, dry cloth.
3
Mount the suction cup ( Installation, page 1 ).
My device is not acquiring satellite signals
• Verify the GPS simulator is turned off ( Navigation Settings, page 16 ).
• Take your device out of parking garages and away from tall buildings and trees.
• Remain stationary for several minutes.
The device does not charge in my vehicle
• Check the fuse in the vehicle power cable ( Changing the
Fuse in the Vehicle Power Cable, page 17
).
• Verify the vehicle is turned on and is supplying power to the power outlet.
• Verify the interior temperature of the vehicle is within the charging temperature range indicated in the specifications.
• Verify the fuse is not broken in the vehicle power outlet.
My battery does not stay charged for very long
• Decrease the screen brightness (
• Shorten the display timeout (
• Decrease the volume (
).
• Disable Bluetooth wireless technology (
Disabling Bluetooth, page 16 ).
• Put the device in power saving mode when not in use
(
Turning the Device On or Off, page 3 ).
• Keep your device away from extreme temperatures.
• Do not leave your device in direct sunlight.
My device does not appear as a removable drive on my computer
On most Windows computers, the device connects using Media
Transfer Protocol (MTP). In MTP mode, the device appears as a portable device and not as a removable drive. MTP mode is supported by Windows 7, Windows Vista ® , and Windows XP
Service Pack 3 with Windows Media Player 10.
My device does not appear as a portable device on my computer
On Mac computers and some Windows computers, the device connects using USB mass storage mode. In USB mass storage mode, the device appears as a removable drive or volume, and not as a portable device. Windows versions prior to Windows XP
Service Pack 3 use USB mass storage mode.
My device does not appear as either a portable device or a removable drive or volume on my computer
1 Disconnect the USB cable from your computer.
2 Turn off the device.
3 Connect the USB cable to your device and to a USB port on your computer.
TIP: The USB cable must connect to a USB port on your computer, not to a USB hub.
The device turns on automatically and goes into MTP mode or
USB mass storage mode. A picture of the device connected to a computer appears on the device screen.
NOTE: If you have several network drives mapped on your computer, Windows may have trouble assigning drive letters to your Garmin drives. For information about assigning drive letters, see the help file for your operating system.
My phone will not connect to the device
• Select Settings > Bluetooth.
The Bluetooth field must be set to Enabled.
• Enable Bluetooth wireless technology on your phone and bring your phone within 33 ft. (10 m) of the device.
• Go to www.garmin.com/bluetooth for more help.
Appendix
Installing a Memory Card for Maps and Data
You can install a memory card to increase the storage space for maps and other data on your device. You can purchase memory cards from an electronics supplier, or go to www.garmin.com
/maps to purchase a memory card with pre-loaded Garmin mapping software. The device supports microSD and microSDHC memory cards.
1 Locate the memory card slot on your device (
2 Insert a memory card into the slot.
3 Press it in until it clicks.
Data Management
You can store files on your device. The device has a memory card slot for additional data storage.
NOTE: The device is not compatible with Windows 95, 98, Me,
Windows NT ® , and Mac OS 10.3 and earlier.
About Memory Cards
You can purchase memory cards from an electronics supplier, or purchase pre-loaded Garmin mapping software
( www.garmin.com
). In addition to map and data storage, the memory card can be used to store files such as maps, images, geocaches, routes, waypoints, and custom POIs.
Connecting the Device to Your Computer
You can connect the device to your computer using a USB cable.
1 Plug the small end of the USB cable into the port on the device.
2 Plug the larger end of the USB cable into a port on your computer.
A picture of your device connected to a computer appears on the device screen.
Depending on your computer operating system, the device appears as either a portable device, a removable drive, or a removable volume.
18 Troubleshooting
Transferring Data From Your Computer
1 Connect the device to your computer (
Depending on your computer operating system, the device appears as either a portable device, a removable drive, or a removable volume.
2 On your computer, open the file browser.
3 Select a file.
4 Select Edit > Copy.
5 Browse to a folder on the device.
NOTE: For a removable drive or volume, you should not place files in the Garmin folder.
6 Select Edit > Paste.
Disconnecting the USB Cable
If your device is connected to your computer as a removable drive or volume, you must safely disconnect your device from your computer to avoid data loss. If your device is connected to your Windows computer as a portable device, it is not necessary to safely disconnect.
1 Complete an action:
• For Windows computers, select the Safely Remove
Hardware icon in the system tray, and select your device.
• For Mac computers, drag the volume icon to the trash.
2 Disconnect the cable from your computer.
Viewing GPS Signal Status
Hold for three seconds.
Purchasing Additional Maps
1 Go to your device product page at garmin.com
.
2 Click the Maps tab.
3 Follow the on-screen instructions.
Purchasing Accessories
Go to garmin.com/accessories .
Appendix 19
Index
Symbols
A
avoidances
area 8 deleting 8 disabling 8 road 8
road features
B battery
17, 18 maximizing 18 problems 18
pairing a phone
C
answering
contacts
dialing
13 history 13 home 13 placing 13
cameras red light
speed
cleaning the device
17 cleaning the touchscreen 17
computer, connecting
coordinates 10 current location 10
D deleting
service categories
trips
destinations. See locations
dialing
disconnecting, Bluetooth device
E
emergency services
F files, transferring
See also locations
20
cities
coordinates
fuel stations
tracking
fuse, changing
G
Garmin Express registering the device
GPS
H
hands-free phone calls 12 headset 12
pairing
help.
See also product support home calling
editing location
I
ID number
K
layout
L language
voice
latitude and longitude
calling
current
10 recently found 10 saving 10
M
map view
2-D
3-D
maps
layers
symbols
theme
tools
updating
memory card
mounting the device
motorcycle
suction cup
myTrends, routes
N navigation
off-road
settings
next turn
notifications
O off-road navigation
P pairing disconnecting
headset
phone
parking, last spot
phone disconnecting
phone book
phone calls
answering
dialing
venues
power cables
power key
product registration
product support
proximity points alerts, settings 16
Q
R
resetting device
trip data
restoring settings
rider alerts
routes
adding a point
calculating
myTrends
starting
stopping
suggested
viewing on the map
S satellite signals acquiring
saved locations
categories
editing
saving, current location
screenshots
search bar
service history categories
editing
settings
Index
shaping a route
shortcuts
Smartphone Link
software
version
suction cup
T theft, avoiding
tire pressure
profiles
tolls, avoiding
TracBack
transportation modes
trip information 12 resetting 12 viewing 12
trip log, viewing
trip planner 7 editing a trip 7 shaping points 7
turn list
U unit ID
updating
USB, disconnecting
V venues
VIRB remote
W
Index 21
+ 32 2 672 52 54
1-866-429-9296
+420 221 985466
+420 221 985465
+ 358 9 6937 9758
+ 39 02 36 699699
0800 427 652
+47 815 69 555
+35 1214 447 460
0861 GARMIN (427 646)
+27 (0)11 251 9800
+ 46 7744 52020
0808 238 0000
+44 870 850 1242
913-397-8200
1-800-800-1020
www.garmin.com/support
1800 235 822 +43 (0) 820 220230
0800 770 4960
+385 1 5508 272
+385 1 5508 271
+ 45 4810 5050
+ 331 55 69 33 99
(+52) 001-855-792-7671
0800 0233937
00800 4412 454
+44 2380 662 915
+386 4 27 92 500
+34 93 275 44 97
+886 2 2642-9199 ext 2
+49 (0) 89 858364880 zum Ortstarif - Mobilfunk kann abweichen
© 2016 Garmin Ltd. or its subsidiaries
Download
Public link updated
The public link to your chat has been updated. You may view and manage your chat links after registration here.
Document public link
Advertisement
Key features
- Bluetooth connectivity for calls and music
- Rider alerts for curves, speed cameras, etc.
- Fuel tracking and service history logging
- Adventurous routing with curvy road preference
- Trip planning with multiple destinations
- Map customization and data fields
- Tire pressure monitoring system (TPMS) compatibility
- VIRB action camera control