Sony VPCZ217GG User manual

Add to my manuals
209 Pages

advertisement

Sony VPCZ217GG User manual | Manualzz

User Guide

Personal Computer

VPCZ2 Series

N

n

2

N

Contents

Before Use .......................................................................... 4

Finding More about Your VAIO Computer .................... 5

Ergonomic Considerations ............................................ 8

Getting Started.................................................................. 10

Locating Controls and Ports........................................ 11

About the Indicator Lights ........................................... 18

Connecting a Power Source ....................................... 19

Using the Battery Pack................................................ 21

Shutting Down Your Computer Safely ........................ 29

Using the Power Saving Modes .................................. 30

Keeping Your Computer in Optimum Condition .......... 33

Using Your VAIO Computer.............................................. 36

Using the Keyboard..................................................... 37

Using the Touch Pad................................................... 40

Using Special-function Buttons ................................... 43

Using the Quick Web Access Function ....................... 44

Using the Built-in Camera ........................................... 46

Using the Optical Disc Drive ....................................... 47

Using "Memory Stick".................................................. 55

Using Other Modules / Memory Cards........................ 62

Using the Internet........................................................ 66

Using the Network (LAN) ............................................ 67

Using the Wireless LAN...............................................68

Using the Wireless WAN .............................................73

Using the BLUETOOTH Function................................78

Using Fingerprint Authentication .................................84

Using the TPM .............................................................89

Using Peripheral Devices ..................................................99

Using the Noise Canceling Headphones ...................100

Connecting a Docking Station ...................................107

Connecting External Speakers or Headphones ........115

Connecting an External Display ................................116

Selecting Display Modes ...........................................122

Using the Multiple Monitors Function ........................123

Connecting a USB Device .........................................125

Customizing Your VAIO Computer..................................127

Setting the Password.................................................128

Using the VAIO Control Center .................................135

Using the VAIO Power Management.........................136

Selecting Graphics Modes.........................................137

Changing the Display Language ...............................139

n

3

N

Precautions..................................................................... 140

Safety Information ..................................................... 141

Care and Maintenance Information ........................... 143

Handling Your Computer........................................... 144

Handling the LCD Screen ......................................... 146

Using the Power Source ........................................... 147

Handling the Built-in Camera .................................... 148

Handling Discs .......................................................... 149

Using the Battery Pack.............................................. 150

Handling "Memory Stick"........................................... 151

Handling the Built-in Storage Device ........................ 152

Using Fingerprint Authentication ............................... 153

Using the TPM .......................................................... 154

Troubleshooting .............................................................. 155

Computer Operations................................................ 157

System Update / Security.......................................... 164

Recovery / Recovery Media ...................................... 165

Partition ..................................................................... 169

Battery Pack.............................................................. 170

Built-in Camera ......................................................... 172

Networking (LAN/Wireless LAN) ............................... 174

Wireless WAN ........................................................... 178

BLUETOOTH Technology......................................... 179

Optical Discs ............................................................. 182

Display .......................................................................187

Printing ......................................................................193

Microphone ................................................................194

Speakers ...................................................................195

Touch Pad .................................................................197

Keyboard ...................................................................198

Floppy Disks ..............................................................199

Audio/Video ...............................................................200

"Memory Stick" ..........................................................202

Peripherals ................................................................203

Docking Station .........................................................204

Trademarks .....................................................................205

Notice ..............................................................................208

Before Use >

n

4

N

Before Use

Congratulations on your purchase of this VAIO

®

computer and welcome to the on-screen User Guide. Sony has combined leading-edge technology in audio, video, computing, and communications to provide you with a state-of-the-art computing experience.

!

External views illustrated in this manual may look slightly different from those of your computer.

How to find specifications

Some features, options, and supplied items may not be available on your computer.

To find out about the configuration of your computer, visit the web site at http://www.sony-asia.com/ .

Before Use >

Finding More about Your VAIO Computer

Finding More about Your VAIO Computer

This section provides support information about your VAIO computer.

1. Printed Documentation

Quick Start Guide — An overview of components connection, set-up information, etc.

Recovery, Backup and Troubleshooting Guide

Safety Regulations, etc.

Before activating the wireless functions such as the wireless LAN and BLUETOOTH technology, read the Safety Regulations carefully.

n

5

N

Before Use >

Finding More about Your VAIO Computer

n

6

N

2. On-screen Documentation

VAIO User Guide — General information of your VAIO computer including support and troubleshooting information.

To access VAIO User Guide, click Start , All Programs, and VAIO Manual.

Windows Help and Support — A comprehensive resource for practical advice, tutorials, and demonstrations to help you learn to use your computer.

To access Windows Help and Support, click Start and Help and Support, or press and hold the Microsoft Windows key and press the F1 key.

Before Use >

Finding More about Your VAIO Computer

3. Support Web Sites

Sony online support web site

The Sony online support web site provides instant access to information on commonly encountered problems: http://www.sony-asia.com/support/vaio/onlinesupport

Online registration

You can register your computer online at the following URL: http://www.sony-asia.com/support/vaio/registration

Contact information

You can contact us at the following URL: http://www.sony-asia.com/support/vaio/contactus

❑ For other Sony products, visit the web site at http://www.sony-asia.com/ .

n

7

N

Before Use >

Ergonomic Considerations

n

8

N

Ergonomic Considerations

You will be using your computer as a portable device in a variety of environments. Whenever possible, you should attempt to take account of the following ergonomic considerations for both stationary and portable environments:

Position of your computer – Place the computer directly in front of you. Keep your forearms horizontal, with your wrists in a neutral, comfortable position while using the keyboard or the pointing device. Let your upper arms hang naturally at your sides. Take frequent breaks while using your computer. Excessive use of the computer may strain eyes, muscles, or tendons.

Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet are flat on the floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and avoid slouching forward or leaning far backwards.

Before Use >

Ergonomic Considerations

n

9

Viewing angle of the computer display – Use the display tilting feature to find the best position. You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position. Adjust the brightness level of the display as well.

Lighting – Choose a location where windows and lights do not cause glare and reflection on the display. Use indirect lighting to avoid bright spots on the display. Proper lighting adds to your comfort and work efficiency.

Positioning an external display – When using an external display, set the display at a comfortable viewing distance.

Make sure the display screen is at or slightly below eye level when you are sitting in front of the monitor.

N

Getting Started >

n

10

N

Getting Started

This section describes how to get started using your VAIO computer.

!

Before starting your computer for the first time, do not connect any other hardware that did not originally come with your computer. Upon completion, connect one device (for example, a printer, an external hard disk drive, a scanner, and so on) at a time, following the manufacturer's instructions.

Locating Controls and Ports

(page 11)

About the Indicator Lights

(page 18)

Connecting a Power Source

(page 19)

Using the Battery Pack

(page 21)

Shutting Down Your Computer Safely

(page 29)

Using the Power Saving Modes

(page 30)

Keeping Your Computer in Optimum Condition

(page 33)

Getting Started >

Locating Controls and Ports

Locating Controls and Ports

Take a moment to identify the controls and ports shown on the following pages.

!

The appearance of your computer may be different from those illustrated in this manual due to variations in specifications.

Front

A

Built-in camera (page 46)

B

Built-in camera indicator (page 18)

C

LCD screen

(page 146)

D

Power button/Power indicator

(page 18)

E

Keyboard (page 37)

F

Touch pad (page 40)

G

Charge indicator (page 18)

H

Disc drive indicator

(page 18)

I

WIRELESS indicator

(page 18)

n

11

N

Getting Started >

Locating Controls and Ports

n

12

N

A

WIRELESS switch

(page 68)

, (page 73) ,

(page 78)

B

ASSIST button (page 43)

C

WEB button

(page 43)

D

VAIO button (page 43)

E

Ambient light sensor (page 39)

,

(page 190)

Measures ambient light intensity for automatically adjusting the

LCD brightness to an optimum level.

F

Built-in microphones (monaural)

G

Num lock indicator

(page 18)

H

Caps lock indicator

(page 18)

I

Scroll lock indicator (page 18)

J

Fingerprint sensor

(page 84)

K

"Memory Stick Duo" slot

*

(page 55)

L

Media access indicator (page 18)

M

SD memory card slot

(page 62)

* Your computer supports only Duo-size "Memory Stick".

Getting Started >

Locating Controls and Ports

Back

A

SIM card slot

(page 73)

B

Air vents

n

13

N

Getting Started >

Locating Controls and Ports

Right

n

14

N

A

Headphones jack

(page 100)

, (page 115)

B

LAN port (page 67)

Pull the port cover down before using the LAN port.

When the port cover disengages:

The port cover may disengage if you exert pressure on it when opening it or disconnecting a LAN cable. To attach the port cover, align the cover with the edge (1) of the port and push the cover down until it clicks into place.

C

HDMI output port

(page 118)

D

USB port

*1

(page 125)

E

Docking Station/USB port

*2

(page 109)

,

(page 125)

F

DC IN port (page 19)

*1

Supports USB 2.0 compatible devices.

*2

Blue colored port supports USB 2.0/3.0 compatible devices.

Getting Started >

Locating Controls and Ports

Left

n

15

N

A

Monitor port

(page 116)

B

Air vent

C

Security slot

!

Depending on the security cable you use, connecting the cable to the security slot may lift the left side of your computer. Use the appropriate security cable.

Getting Started >

Locating Controls and Ports

Bottom (with the battery pack)

n

16

N

A

Built-in speakers (stereo)

B

Battery off button

(page 24)

, (page 160) ,

(page 171)

C

Extended battery pack connector cover

*

D

Air vents

* For detailed instructions on how to attach an extended battery pack, see the manual that came with your extended battery pack.

While the extended battery pack is attached to your computer, be sure to keep the removed connector cover for future use.

Getting Started >

Locating Controls and Ports

Bottom (without the battery pack)

A

Battery connector

(page 21)

!

You cannot replace the memory module(s) on your computer.

n

17

N

Getting Started >

About the Indicator Lights

n

18

N

About the Indicator Lights

Your computer is equipped with the following indicator lights:

Indicator

Power 1

Charge

Media access

Built-in camera

Disc drive

Num lock

Caps lock

Scroll lock

WIRELESS

Functions

Illuminates in green while the computer is in Normal mode, blinks slowly in orange while the computer is in Sleep mode, and turns off when the computer is turned off or enters Hibernate mode.

Illuminates while the battery pack is charging. See Charging the Battery Pack

(page 25)

for more information.

Illuminates while data access to a memory card, such as "Memory Stick" and an SD memory card, is in progress. (Do not place the computer into Sleep mode or turn it off while this indicator light is lit.) When the indicator light is unlit, the memory card is not in use.

Illuminates while the built-in camera is in use.

Illuminates while data access to the built-in storage device is in progress. Do not place the computer into Sleep mode or turn it off while this indicator light is lit.

Press the Fn+Num Lk keys to activate the numeric keypad. Press the keys a second time to deactivate the numeric keypad. The numeric keypad is not active when the indicator light is unlit.

Press the Caps Lock key to type letters in uppercase. Letters appear in lowercase if you press the Shift key while the indicator light is lit. Press the key a second time to turn off the indicator light. Normal typing resumes when the Caps lock indicator light is turned off.

Press the Fn+Scr Lk keys to change how you scroll the display. Normal scrolling resumes when the Scroll lock indicator light is turned off. The Scr Lk key functions differently depending on the program you are using and does not work with all programs.

Illuminates while one or more wireless options are enabled.

Getting Started >

Connecting a Power Source

n

19

N

Connecting a Power Source

You can use either an AC adapter or a rechargeable battery pack for supplying power to your computer. Before using the computer for the first time, you need to connect an AC adapter to your computer.

!

Do not use your computer without installing the battery pack as it may cause the computer to malfunction.

Using the AC Adapter

While your computer is directly connected to an AC power source and has a battery pack installed, it uses power from the

AC outlet.

Use only the supplied AC adapter for your computer.

To use the AC adapter

1

Plug one end of the power cord (1) into the AC adapter (3).

2

Plug the other end of the power cord into an AC outlet (2).

3

Plug the cable from the AC adapter (3) into the DC IN port (4) on the computer.

!

The shape of the DC In plug varies depending on the AC adapter.

Getting Started >

Connecting a Power Source

n

20

N

To disconnect your computer completely from an AC power source, unplug the AC adapter from the AC outlet.

Make sure that an AC outlet is easily accessible.

If you do not intend to use your computer for an extended period of time, place the computer into Hibernate mode. See Using Hibernate Mode

(page

32)

.

Getting Started >

Using the Battery Pack

n

21

N

Using the Battery Pack

The battery pack is already installed on your computer at the time of delivery but is not fully charged.

!

Do not use your computer without installing the battery pack as it may cause the computer to malfunction.

Installing/Removing the Battery Pack

In order to distinguish the battery pack which is installed on your computer at the time of delivery from an extended battery pack (supplied with selected models only), it may be referred to as the primary battery pack in this manual.

For detailed instructions on how to attach and charge an extended battery pack, see the manual that came with your extended battery pack.

To install the battery pack

1

Turn off the computer, close the LCD screen lid, and unplug the AC adapter.

2

Fit the battery pack into the battery compartment.

The battery pack should be level with the bottom of the computer.

Getting Started >

Using the Battery Pack

3

Tighten the four rubber screws (1), two short metallic screws (2), and two long metallic screws (3) with a coin.

n

22

N

Getting Started >

Using the Battery Pack

To remove the battery pack

!

You will lose all unsaved data if you remove the battery pack while your computer is on and not connected to the AC adapter.

1

Turn off the computer, close the LCD screen lid, and unplug the AC adapter if plugged.

2

Unscrew the eight screws with a coin.

n

23

N

!

Be careful not to lose the removed screws.

3

Hook your finger in the cut of the battery pack.

Getting Started >

Using the Battery Pack

4

Pull the battery pack in the direction of the arrow and take it out of the battery compartment.

n

24

N

If your computer does not recognize the battery pack, turn off your computer and push and hold the battery off button for about three seconds with a thin, straight object (such as a paper clip). If this does not solve the problem, remove the battery pack and install it once again.

If an extended battery pack is attached to the computer, turn off the computer and remove the extended battery pack. If this does not solve the problem, push and hold the battery off button for about three seconds. If the problem persists, remove both battery packs and install them once again.

!

For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that meet the quality assurance standard, supplied by Sony for your VAIO computer. Some VAIO computers may only function with a genuine Sony battery pack.

Getting Started >

Using the Battery Pack

n

25

N

Charging the Battery Pack

The battery pack supplied with your computer is not fully charged at the time of delivery.

To charge the battery pack

1

Install the battery pack.

2

Connect the computer to a power source with the AC adapter.

The charge indicator light is on while the battery pack is charging. When the battery pack charges close to the maximum charge level you selected, the charge indicator turns off.

Charge indicator status

Lit in orange

Blinks along with the green power indicator

Blinks along with the orange power indicator

Blinks fast in orange

Meaning

The battery pack is charging.

The battery pack is running out of power.

(Normal mode)

The battery pack is running out of power.

(Sleep mode)

A battery error has occurred due to a failed battery pack or an unlocked battery pack.

!

Charge the battery pack as described in this manual from your first battery charge.

Getting Started >

Using the Battery Pack

n

26

N

Keep the battery pack in your computer while it is directly connected to an AC power source. The battery pack continues to charge while you are using the computer.

When the battery pack is running out of power and both the charge and power indicator lights blink, you should either connect the AC adapter to recharge the battery pack or shut down your computer and install a fully charged battery pack.

Your computer is supplied with a lithium ion battery pack and can be recharged any time. Charging a partially discharged battery pack does not affect the life of battery.

While some software applications or peripheral devices are in use, your computer may not enter Hibernate mode even when the remaining battery life becomes short. To avoid loss of data while the computer is running on the battery, you should save your data frequently and manually activate a power management mode, such as Sleep or Hibernate.

If the battery pack runs out of power while the computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible. To avoid loss of data, you should save your data frequently.

About the use of an extended battery pack

❑ If an extended battery pack is attached to your computer, the primary battery pack is charged first up to about 80% of its battery capacity. Then, the extended battery pack starts charging up to about 80%. After both battery packs are charged up to about 80%, the primary battery pack starts charging to 100%. Then, the extended battery pack starts charging to

100%.

❑ If an extended battery pack is attached to your computer, battery power of the extended battery pack is used first.

Getting Started >

Using the Battery Pack

n

27

N

Checking the Battery Charge Capacity

The battery charge capacity gradually decreases as the number of battery charging increases or the duration of use of the battery pack extends. To get the most out of the battery pack, check the battery charge capacity and change the battery settings.

To check the battery charge capacity

1

Click Start, All Programs, and VAIO Control Center.

2

Click Power Management and Battery.

Additionally, you can enable the battery care function to extend the life of the battery pack.

Getting Started >

Using the Battery Pack

n

28

N

Extending the Battery Life

When your computer is running on battery power, you can extend the battery life using the following methods.

❑ Decrease the LCD brightness of your computer screen.

❑ Use the power saving mode. See Using the Power Saving Modes

(page 30)

for more information.

❑ Change the power saving settings on the Power Options. See Using the VAIO Power Management

(page 136)

for more

information.

For more information on how to extend the battery life, see the help file after following the steps in Checking the Battery Charge Capacity

(page 27)

.

Getting Started >

Shutting Down Your Computer Safely

Shutting Down Your Computer Safely

To avoid losing unsaved data, be sure to shut down your computer properly, as described below.

To shut down your computer

1

Turn off any peripherals connected to the computer.

2

Save your data and close all running software applications.

3

Click Start and the Shut down button.

After a short time, the computer automatically turns off. Make sure the power indicator light turns off.

n

29

N

Getting Started >

Using the Power Saving Modes

n

30

N

Using the Power Saving Modes

You can take advantage of the power management settings to conserve battery life. In addition to the normal operating mode, your computer has two distinct power saving modes to suit your preference: Sleep and Hibernate.

!

If you do not intend to use your computer for an extended period of time while it is disconnected from an AC power source, place the computer into

Hibernate mode or turn it off.

If the battery pack runs out of power while your computer is in Sleep mode, you will lose all unsaved data. Going back to the previous work state is impossible. To avoid loss of data, you should save your data frequently.

Mode

Normal mode

Sleep mode

Hibernate mode

Description

This is the normal state of your computer while it is in use. The green power indicator light is lit while the computer is in this mode.

Sleep mode turns off the LCD screen and places the built-in storage device(s) and the CPU into a low power consumption mode. The orange power indicator light blinks slowly while your computer is in this mode. Your computer comes out of Sleep mode quicker than out of Hibernate mode. However, Sleep mode uses more power than Hibernate mode.

While your computer is in Hibernate mode, the state of the system is saved on the built-in storage device(s) and power is turned off. Even when the battery pack runs out of power, no data will be lost. The power indicator light is unlit while your computer is in this mode.

Getting Started >

Using the Power Saving Modes

Using Sleep Mode

To activate Sleep mode

Click Start, the arrow next to the Shut down button, and Sleep.

To return to Normal mode

❑ Press any key.

❑ Press the power button on your computer.

!

If you press and hold the power button for more than four seconds, your computer will turn off automatically. You will lose all unsaved data.

n

31

N

Getting Started >

Using the Power Saving Modes

Using Hibernate Mode

To activate Hibernate mode

Press the Fn+F12 keys.

Alternatively, you can click Start, the arrow next to the Shut down button, and Hibernate.

!

Do not move your computer before its power indicator light turns off.

To return to Normal mode

Press the power button.

!

If you press and hold the power button for more than four seconds, your computer will turn off automatically.

n

32

N

Getting Started >

Keeping Your Computer in Optimum Condition

n

33

N

Keeping Your Computer in Optimum Condition

Updating Your Computer

Be sure to update your VAIO computer with the following software applications for enhancing your computer's efficiency, security, and functionality.

The VAIO Update automatically notifies you of new updates available on the Internet, and downloads and installs them on the computer.

Windows Update

Click Start, All Programs, and Windows Update and then follow the on-screen instructions.

VAIO Update 5

Click Start, All Programs, and VAIO Update and then follow the on-screen instructions.

!

Your computer must be connected to the Internet to download the updates.

Getting Started >

Keeping Your Computer in Optimum Condition

n

34

N

Using the Antivirus Software for Your Computer

Protect your computer against computer viruses by using the antivirus software.

You can keep the antivirus software current with the latest updates by downloading and installing the updates from the web site of the manufacturer. To update the antivirus software, find the antivirus software installed on your computer from the following and follow the steps.

!

Your computer must be connected to the Internet to download the updates.

Trend Micro:

1

Click Start, All Programs, Trend Micro Titanium Maximum Security, and Trend Micro Titanium Maximum

Security.

2

Follow the on-screen instructions.

McAfee:

1

Click Start, All Programs, McAfee, and McAfee Internet Security or McAfee Total Protection.

2

Follow the on-screen instructions.

Norton Internet Security:

1

Click Start, All Programs, Norton Internet Security, and LiveUpdate or Norton Internet Security.

2

Follow the on-screen instructions.

See the help file included with your software program for more information.

!

The actual procedure may be different from the above depending on the version of the software installed on your computer. In such a case, follow the on-screen instructions.

Getting Started >

Keeping Your Computer in Optimum Condition

n

35

N

Using the VAIO Care

With the VAIO Care, you can regularly conduct performance checks and tune-ups on your computer to keep it running at an optimum level. Launch the VAIO Care whenever a problem is found on your computer. The VAIO Care will provide appropriate measures to solve the problem.

To launch the VAIO Care

❑ On models with the ASSIST button

Press the ASSIST button while your computer is on.

❑ On models without the ASSIST button

Click Start, All Programs, and VAIO Care.

See the help file included with the VAIO Care for more information.

On models with the ASSIST button, pressing the ASSIST button while the computer is off launches the VAIO Care Rescue. The VAIO Care Rescue can be used to recover your computer in case of emergency, for example, when the Windows does not start.

Using Your VAIO Computer >

Using Your VAIO Computer

This section describes how to get the most out of using your VAIO computer.

Using the Keyboard

(page 37)

Using the Touch Pad

(page 40)

Using Special-function Buttons

(page 43)

Using the Quick Web Access Function

(page 44)

Using the Built-in Camera

(page 46)

Using the Optical Disc Drive

(page 47)

Using "Memory Stick"

(page 55)

Using Other Modules / Memory Cards

(page 62)

Using the Internet

(page 66)

Using the Network (LAN)

(page 67)

Using the Wireless LAN

(page 68)

Using the Wireless WAN

(page 73)

Using the BLUETOOTH Function

(page 78)

Using Fingerprint Authentication

(page 84)

Using the TPM

(page 89)

n

36

N

Using Your VAIO Computer >

Using the Keyboard

n

37

N

Using the Keyboard

Your keyboard has additional keys that perform model-specific tasks.

Combinations and Functions with the Fn Key

Some keyboard functions can be used only after the operating system is finished launching.

Combination/Feature Function

Disables and enables the touch pad.

Fn + (F1): touch pad operation

Fn + % (F2): muting

Fn + 2 (F3/F4): volume control

Fn + 8 (F5/F6): brightness control

Turns on and off the built-in speakers or the headphones.

Changes the built-in speaker volume level.

To increase the volume, keep pressing the Fn+F4 keys or press the Fn+F4 keys and then the

M or , key.

To decrease the volume, keep pressing the Fn+F3 keys or press the Fn+F3 keys and then the m or < key.

Changes the LCD brightness of your computer screen.

To increase lighting intensity, keep pressing the Fn+F6 keys or press the Fn+F6 keys and then the M or , key.

To decrease lighting intensity, keep pressing the Fn+F5 keys or press the Fn+F5 keys and then the m or < key.

Using Your VAIO Computer >

Using the Keyboard

Combination/Feature

Fn + /T (F7): display output

Fn + / (F9/F10): zooming

Fn + (F12): hibernation

n

38

N

Function

Switches the display output between your computer screen and an external display. Press the

Enter key to select the display output.

If you connect the supplied or optional docking station to the computer, you can select graphics modes. See Selecting Graphics Modes

(page 137)

for more information.

!

If you disconnect a display cable from your computer or the docking station while an external display is selected as the display output destination, the computer screen goes blank. In such a case, press the P key twice while holding down the Windows key, and then press the Enter key to switch the display output to the computer screen.

Use of multiple monitors may not be supported depending on the connected external display.

Changes the size of an image or a document displayed on some software.

To make the view look smaller and further away (zoom out), press the Fn+F9 keys.

To make the view look bigger and closer (zoom in), press the Fn+F10 keys.

See the help file included with the VAIO Control Center for more information.

Provides the lowest level of power consumption. When you execute this command, the states of the system and the connected peripheral devices are saved to the built-in storage device and the system power is turned off. To return the system to its original state, use the power button to turn on the power.

For details on power management, see Using the Power Saving Modes

(page 30)

.

Using Your VAIO Computer >

Using the Keyboard

n

39

N

Changing the Backlit Keyboard Settings

Some features and options may not be available on your computer.

If your computer is equipped with a backlit keyboard, you can set the keyboard light to automatically turn on and off according to ambient light intensity.

Additionally, you can set a time period to turn off the keyboard backlight after inactivity of keyboard operations.

To change the backlit keyboard settings

1

Click Start, All Programs, and VAIO Control Center.

2

Click Keyboard and Mouse and Backlit Keyboard.

Ambient light intensity is measured by the ambient light sensor. Blocking the ambient light sensor may turn on the keyboard backlight.

Using Your VAIO Computer >

Using the Touch Pad

Using the Touch Pad

By sliding your finger on the touch pad (1), you can move the pointer (2) on the computer screen.

With the pointer on your desired item or object, press the left button zone or the right button zone to execute various commands or display menus.

n

40

N

Using Your VAIO Computer >

Using the Touch Pad

About the touch pad zone

Zone

Active zone

Description

Slide your finger on this zone to move the pointer.

Left button zone Press anywhere on this zone to left-click.

Right button zone Press anywhere on this zone to right-click.

Vertical scroll zone Slide your finger vertically on this zone to scroll up and down.

n

41

N

Using Your VAIO Computer >

Using the Touch Pad

n

42

N

To use the touch pad zone

Action Description

Point

Click

Double-click

Right-click

Drag

Scroll vertically

Scroll horizontally

Slide your finger on the active zone to place the pointer on an item or object.

Press the left button zone once.

Press the left button zone twice in a row.

Press the right button zone once. With many applications, this action displays a context-sensitive shortcut menu (if any).

Slide your finger on the active zone while pressing the left button zone.

Slide two fingers vertically on the active zone or slide a finger on the vertical scroll zone (the scroll function is available only with applications that support a touch pad scroll feature).

Slide two fingers horizontally on the active zone (the scroll function is available only with applications that support a touch pad scroll feature).

Flick Slide three fingers linearly in quick motion on the active zone. On web browsers or image viewer software, you can flick left to move backward and flick right to move forward.

You can disable/enable the touch pad by pressing the Fn+F1 keys. You can also use the VAIO Control Center to change the touch pad settings.

!

Be sure to connect a mouse before disabling the touch pad. If you disable the touch pad before connecting a mouse, you will be able to use only the keyboard for pointer operations.

Using Your VAIO Computer >

Using Special-function Buttons

n

43

N

Using Special-function Buttons

Your computer is equipped with special buttons to help you use specific functions of the computer.

The ASSIST button, the WEB button, and the VAIO button on the computer are touch sensor buttons. Unintentional touch with each button may execute the corresponding function or task.

Special-function button

ASSIST button

WEB button

VAIO button

Functions

Launches the VAIO Care while the computer is on.

While the computer is off, the ASSIST button launches the VAIO Care Rescue. The VAIO Care Rescue can be used to recover the computer in case of emergency, for example, when the Windows does not start. See

Using the VAIO Care

(page 35)

for more information.

While the computer is in Normal mode, the WEB button launches the web browser assigned to the button by default.

While the computer is off, the WEB button activates the Quick Web Access function and launches the web

browser used with this function. See Using the Quick Web Access Function

(page 44)

for more

information.

!

The WEB button is not functional while the computer is in Sleep mode or Hibernate mode.

Executes the task that is assigned to the button by default.

You can change the default assignment with the VAIO Control Center.

Disc eject button

* Ejects the optical disc.

* Located on the docking station

(page 107)

.

Using Your VAIO Computer >

Using the Quick Web Access Function

n

44

N

Using the Quick Web Access Function

The Quick Web Access function enables you immediately to access the Internet without launching the Windows operating system.

Activating the Quick Web Access Function

To activate the Quick Web Access function, your computer must be off.

To activate the Quick Web Access function

1

Press the WEB button on the computer.

2

Follow the instructions in the initial setup wizard.

Once you have completed the initial setup, the web browser used with the Quick Web Access function launches just by pressing the WEB button from the next time.

Exiting the Quick Web Access Function

!

To launch the Windows operating system, you first need to exit the Quick Web Access function.

To exit the Quick Web Access function, do any of the following:

❑ Click the

icon located at the lower left corner of the screen.

❑ Press the WEB button.

❑ Press the power button on the computer.

For detailed information on how to use or restrictions on the Quick Web Access function, click the icon located at the lower right corner of the screen.

Using Your VAIO Computer >

Using the Quick Web Access Function

n

45

N

Notes on Using the Quick Web Access Function

❑ If you use the Quick Web Access function along with the docking station, connect it to your computer before pressing the

WEB button.

❑ While the Quick Web Access function is activated, you cannot use:

❑ the ASSIST button.

❑ any function key, except the F2, F3, and F4 keys, in combination with the Fn key for shortcuts.

❑ the Scr Lk key in combination with the Fn key for a shortcut.

❑ any port and jack except the DC IN port, the LAN port, the USB ports, and the headphones jack.

❑ the "Memory Stick Duo" slot and the SD memory card slot.

❑ the Intel

®

Wireless Display (installed on selected models only).

❑ the wireless WAN function (available on selected models only).

❑ the WiMAX function (available on selected models only).

Using Your VAIO Computer >

Using the Built-in Camera

n

46

N

Using the Built-in Camera

Your computer is equipped with a built-in camera.

With the communication software, such as Windows Live Messenger, you can make a video call through the Internet. For detailed information on how to use the software, see the help file included with the software.

The built-in camera indicator light illuminates while the built-in camera is in use.

The software installed on your computer varies depending on your computer's configurations.

To make a video call using Windows Live Messenger

1

Click Start, All Programs, and Windows Live Messenger.

You need to sign in to Windows Live Messenger to make a video call.

To display images from the built-in camera

1

Click Start, All Programs, ArcSoft Webcam Suite, and WebCam Companion 4.

2

Click Capture.

If you cannot capture images properly, for example captured images are not displayed smoothly, click the current resolution of the capturing image at the upper right of the main window and lower the resolution.

Using Your VAIO Computer >

Using the Optical Disc Drive

n

47

N

Using the Optical Disc Drive

Connecting the supplied or optional docking station to your computer enables you to use optical disc media with the computer.

Some features and options in this section may not be available on your computer.

See the specifications to find out about the configuration of your computer.

Using Your VAIO Computer >

Using the Optical Disc Drive

To insert a disc

1

Connect the docking station to your computer (page 109) .

2

Insert a disc into the optical disc drive slot.

❑ When the optical disc drive is on the vertical position, slide a disc as illustrated below.

n

48

N

❑ When the optical disc drive is on the horizontal position, slide a disc with the label side facing upward.

Using Your VAIO Computer >

Using the Optical Disc Drive

n

49

N

Supported Discs

Your computer plays and records CDs, DVDs, and Blu-ray Disc

media, depending on the model you purchased.

See the reference chart below to find out which type of optical disc drive supports which types of media.

CD-ROM CD-R/RW DVD-ROM DVD-R/

RW

DVD+R/

RW

DVD+R DL

(Double

Layer)

DVD-R DL

(Dual

Layer)

PR: playable and recordable

P: playable but not recordable

–: not playable or recordable

DVD-

RAM

*1 *2

BD-ROM

BD-R/RE

*3 *4

PR PR PR – – DVD SuperMulti Drive P

Blu-ray Disc™ Drive with DVD SuperMulti

P

PR

*6

PR

*6

P

P

PR

PR

PR

PR PR PR PR P

PR

*5

Blu-ray Disc™ ROM

Drive with

DVD SuperMulti

*1

*2

P

PR

*6 P PR PR PR PR PR P P

The DVD SuperMulti Drive on your docking station does not support the DVD-RAM cartridge. Use non-cartridge discs or discs with a removable cartridge.

Writing data to single-sided DVD-RAM discs (2.6 GB) compliant with DVD-RAM Version 1.0 is not supported.

DVD-RAM Version 2.2/12X-SPEED DVD-RAM Revision 5.0 disc is not supported.

*3

*4

*5

*6

The Blu-ray Disc drive on your docking station does not support BD-RE Disc media in Version 1.0 format and Blu-ray Disc media with a cartridge.

BDXL

Disc media is not supported.

Supports writing data to BD-R Part1 Version 1.1/1.2/1.3 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB) and

BD-RE Part1 Version 2.1 discs (single-layer discs with the capacity of 25 GB, dual-layer discs with the capacity of 50 GB).

Writing data to Ultra Speed CD-RW discs is not supported.

Using Your VAIO Computer >

Using the Optical Disc Drive

n

50

N

!

This unit is designed to playback discs that conform to the Compact Disc (CD) standard. DualDiscs and some music discs encoded with copyright protection technologies do not conform to the Compact Disc (CD) standard. Therefore, these discs may not be compatible with this unit.

When you buy pre-recorded or blank discs for use with your docking station, be sure to read the notices on the disc package carefully to check both playback and recording compatibility with your docking station's optical disc drive. Sony does NOT guarantee the compatibility of the docking station's optical disc drive with discs that are not compliant with the official "CD," "DVD," or "Blu-ray Disc" standard. USING NON-COMPLIANT DISCS CAN CAUSE

FATAL DAMAGE TO YOUR DOCKING STATION OR CREATE SOFTWARE CONFLICTS AND CAUSE SYSTEM HANGING.

For inquiries about disc formats, contact the individual publisher of the pre-recorded disc or the manufacturer of the recordable disc.

8 cm disc reading/writing and use of an 8 cm disc adapter are not supported.

!

To play copyright protected Blu-ray Disc media continually, update the AACS key. The AACS key update requires Internet access.

As with other optical media devices, circumstances may limit compatibility or prevent Blu-ray Disc media playback. VAIO computers may not support movie playback on packaged media recorded in AVC or VC1 formats at high bit rates.

Region settings are required for some contents of DVD and BD-ROM Disc media. If the region setting on the optical disc drive does not match the region coding on the disc, playback is not possible.

Unless your external display is compliant with the High-bandwidth Digital Content Protection (HDCP) standard, you cannot play or view the contents of copyright protected Blu-ray Disc media.

Some content may restrict video output to standard definition or prohibit analog video output. When you output video signals through digital connections, such as an HDMI connection or a DVI connection, it is strongly recommended that a digital HDCP compliant environment be implemented for optimum compatibility and viewing quality.

Exit all memory-resident utility software before playing or writing a disc as it may cause the computer to malfunction.

Using Your VAIO Computer >

Using the Optical Disc Drive

n

51

N

Notes on Using the Optical Disc Drive

Notes on writing data to a disc

❑ Only use circular discs. Do not use discs in any other shape (star, heart, card, etc.), as this may damage the optical disc drive.

❑ Do not strike or shake your computer and the docking station while the optical disc drive is writing data to a disc.

❑ Do not plug or unplug the power cord or the AC adapter while the optical disc drive is writing data to a disc.

❑ Do not disconnect the docking station from your computer while the optical disc drive is writing data to a disc.

Notes on playing discs

To achieve optimum performance of disc playback, you should follow these recommendations:

❑ Some CD players and computer optical disc drives may not be able to play audio CDs created with the CD-R or CD-RW media.

❑ Some DVD players and computer optical disc drives may not be able to play DVDs created with the DVD+R DL, DVD-R

DL, DVD+R, DVD+RW, DVD-R, DVD-RW, or DVD-RAM media.

❑ When your docking station is equipped with a Blu-ray Disc drive, Blu-ray Disc playback is available on your computer.

However, the drive may not be able to play some Blu-ray Disc content, or the computer may become unstable during Bluray Disc playback. To play content normally, download and install the latest updates for Blu-ray Disc playback software using the VAIO Update.

For information on how to use the VAIO Update, see Updating Your Computer

(page 33)

.

❑ Depending on system environment, you may find sound interruptions and/or dropped frames during AVC HD playback.

❑ Do not place your computer into either of the power saving modes while your computer is playing a disc.

❑ Do not strike or shake your computer and the docking station while the optical disc drive is reading data from a disc.

Using Your VAIO Computer >

Using the Optical Disc Drive

n

52

N

Notes on region codes

Region code indicators are labeled on the discs or packages to indicate in which region and on what type of player you can play the disc. If the region code indicates "all," you can play this disc in most regions of the world. If the region code for your residence area is different from the label, you cannot play the disc on your computer.

To find out the region code for your residence area, see the following table.

Residence area

Africa

Europe

Region code

5

2

Residence area

Australia*

Hong Kong*

Region code

4

3

Indonesia*

Kuwait*

Philippines*

3

2

3

Japan*

Malaysia*

Russia

2

3

5

Singapore*

Thailand*

3

3

South Africa* 2

United Arab Emirates* 2

* A region code is not assigned to your docking station's optical disc drive by default.

Residence area

China

India*

Korea

New Zealand*

Saudi Arabia*

Taiwan

Vietnam

3

4

2

3

3

Region code

6

5

Using Your VAIO Computer >

Using the Optical Disc Drive

n

53

If it is your first time to play a DVD video on your computer, follow these steps before inserting the disc:

1

Click Start and Computer.

2

Right-click the optical disc drive icon and select Properties.

3

Click the Hardware tab.

4

Select your optical disc drive from the All disk drives list and click Properties.

5

Click the DVD Region tab.

6

Select an appropriate region from the list and click OK.

!

You can change the region code only a limited number of times. When you have exceeded this number, the drive's region code is permanently assigned and you will not be able to change it again. Reconfiguring your computer does not reset this count.

Any difficulties caused by changing the region code settings of the drive are not covered by the warranty.

N

Using Your VAIO Computer >

Using the Optical Disc Drive

n

54

N

Playing Discs

To play a disc

1

Insert a disc into the optical disc drive.

!

Close all running software applications before playing a disc.

2

If nothing appears on the desktop, click Start, All Programs, and your desired software to play the disc.

For instructions on how to use the software, see the help file included with the software.

Copying Files to Discs

To copy files to a disc

1

Insert a recordable disc into the optical disc drive.

!

Close all running software applications before copying files to a disc.

2

If nothing appears on the desktop, click Start, All Programs, and your desired disc burning software to copy files to the disc.

For instructions on how to use the software, see the help file included with the software.

Using Your VAIO Computer >

Using "Memory Stick"

n

55

N

Using "Memory Stick"

"Memory Stick" is a compact, portable, and versatile IC recording media especially designed for exchanging and sharing digital data with compatible products, such as digital cameras, mobile phones, and other devices. Because it is removable, it can be used for external data storage.

Before You Use "Memory Stick"

The "Memory Stick Duo" slot on your computer can accommodate the following sizes and types of media:

❑ "Memory Stick Duo"

❑ "Memory Stick PRO Duo"

❑ "Memory Stick PRO-HG Duo"

!

Your computer supports only Duo-size "Memory stick", and does not support standard-size "Memory Stick".

For the latest information about "Memory Stick", visit http://www.sony.net/memorycard/ .

Using Your VAIO Computer >

Using "Memory Stick"

Inserting and Removing "Memory Stick"

To insert "Memory Stick"

1

Locate the "Memory Stick Duo" slot.

2

Hold "Memory Stick" with the arrow pointing toward the slot.

3

Carefully slide "Memory Stick" into the slot until it clicks into place.

Do not force the media into the slot.

n

56

N

Using Your VAIO Computer >

Using "Memory Stick"

n

57

N

If "Memory Stick" does not go into the slot easily, remove it gently and verify you are inserting it in the proper direction.

When you insert "Memory Stick" into the slot for the first time, you may be prompted to install driver software. If prompted, follow the on-screen instructions to install the software.

"Memory Stick" is automatically detected by your system and the contents of "Memory Stick" are displayed. If nothing appears on the desktop, click

Start, Computer, and double-click the "Memory Stick" icon.

The "Memory Stick" icon will appear in the Computer window after you insert "Memory Stick" into the slot.

!

Before using "Memory Stick Micro" ("M2"), be sure to insert it into an "M2" Duo adaptor. If you insert the media directly into the "Memory Stick Duo" slot without the adaptor, you may not be able to remove it from the slot.

Using Your VAIO Computer >

Using "Memory Stick"

n

58

N

To remove "Memory Stick"

!

Do not remove "Memory Stick" while the media access indicator light is lit. If you do, you may lose data. Large volumes of data may take time to load, so make sure the indicator light is unlit before removing "Memory Stick".

1

Locate the "Memory Stick Duo" slot.

2

Check that the media access indicator light is unlit.

3

Push in "Memory Stick" toward the computer and release.

"Memory Stick" ejects.

4

Pull "Memory Stick" out of the slot.

!

Be sure to remove "Memory Stick" gently, or it may pop out unexpectedly.

Using Your VAIO Computer >

Using "Memory Stick"

n

59

N

Formatting "Memory Stick"

To format "Memory Stick"

"Memory Stick" is formatted by default and is ready for use.

If you want to reformat the media with your computer, follow these steps.

!

Be sure to use the device that is designed to format the media and supports "Memory Stick" when formatting the media.

Formatting "Memory Stick" erases the entire data stored on the media. Before formatting the media, make sure that it does not contain your valuable data.

Do not remove "Memory Stick" from the slot while formatting. This could cause a malfunction.

1

Locate the "Memory Stick Duo" slot.

2

Carefully slide "Memory Stick" into the slot until it clicks into place.

3

Click Start and Computer.

4

Right-click the "Memory Stick" icon and select Format.

5

Click Restore device defaults.

!

The size of the allocation unit and file system may change.

Do not select NTFS from the File system drop-down list as it may cause a malfunction.

The formatting process will be completed more quickly if you select Quick Format in Format options.

Using Your VAIO Computer >

Using "Memory Stick"

6

Click Start.

7

Follow the on-screen instructions.

!

It may take time to format "Memory Stick" depending on the media type.

n

60

N

Using Your VAIO Computer >

Using "Memory Stick"

n

61

N

Notes on Using "Memory Stick"

❑ Your computer has been tested and found compatible with Sony branded "Memory Stick" with capacity of up to 32 GB that are available as of January 2011. However, not all "Memory Stick" are guaranteed of compatibility.

❑ Be sure to hold "Memory Stick" with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the media, do not force "Memory Stick" into the slot if you cannot insert it smoothly.

❑ Use care when inserting or removing "Memory Stick" from the slot. Do not force it in or out of the slot.

❑ Inserting "Memory Stick" with multiple conversion adaptors is not guaranteed of compatibility.

❑ "MagicGate" is the general name of the copyright protection technology developed by Sony. Use "Memory Stick" with the

"MagicGate" logo to take advantage of this technology. The "Memory Stick Duo" slot on your computer does not support

"MagicGate" technology of "Memory Stick" with capacity of up to 256 MB.

❑ Except for your personal use, it is against the copyright law to use any audio and/or image data you recorded without prior consent from the respective copyright holders. Accordingly, "Memory Stick" with such copyrighted data can be used only within the law.

❑ Do not insert more than one memory card into the slot. Improper insertion of the media may damage both your computer and the media.

Using Your VAIO Computer >

Using Other Modules / Memory Cards

n

62

N

Using Other Modules / Memory Cards

Using the SD Memory Card

Your computer is equipped with an SD memory card slot. You can use this slot to transfer data among digital cameras, camcorders, music players, and other audio/video devices.

Before you use the SD memory card

The SD memory card slot on your computer can accommodate the following memory cards:

❑ SD memory card

❑ SDHC memory card

❑ SDXC memory card

For the latest information on compatible memory cards, see Finding More about Your VAIO Computer

(page 5)

to visit the

appropriate support web site.

Using Your VAIO Computer >

Using Other Modules / Memory Cards

To insert an SD memory card

1

Locate the SD memory card slot.

2

Hold the SD memory card with the arrow pointing toward the slot.

3

Carefully slide the SD memory card into the slot until it clicks into place.

Do not force the card into the slot.

n

63

N

When you insert the SD memory card into the slot for the first time, you may be prompted to install driver software. If prompted, follow the on-screen instructions to install the software.

The SD memory card icon will appear in the Computer window after you insert the card into the slot.

Using Your VAIO Computer >

Using Other Modules / Memory Cards

To remove an SD memory card

1

Locate the SD memory card slot.

2

Check that the media access indicator light is unlit.

3

Push in the SD memory card toward the computer and release.

The SD memory card ejects.

4

Pull the SD memory card out of the slot.

n

64

N

Using Your VAIO Computer >

Using Other Modules / Memory Cards

n

65

N

Notes on Using Memory Cards

General notes on using the memory card

❑ Be sure to use memory cards that are compliant with the standards supported by your computer.

❑ Be sure to hold the memory card with the arrow pointing in the correct direction as you insert it into the slot. To avoid damaging your computer or the media, do not force the memory card into the slot if you cannot insert it smoothly.

❑ Use care when inserting or removing the memory card from the slot. Do not force it in or out of the slot.

❑ Do not remove the memory card while the media access indicator light is lit. If you do, you may lose data.

❑ Do not attempt to insert a memory card or memory card adaptor of a different type into the memory card slot. An incompatible memory card or memory card adaptor may cause difficulty in removing from the slot and can cause damage to your computer.

❑ Do not insert more than one memory card into the slot. Improper insertion of the media may damage both your computer and the media.

Notes on using the SD memory card

❑ Your computer has been tested and found compatible only with major memory cards available as of January 2011.

However, not all memory cards are guaranteed of compatibility.

❑ SD memory cards (up to 2 GB), SDHC memory cards (up to 32 GB), and SDXC memory cards (up to 64 GB) have been tested and found compatible with your computer.

❑ Some types of SD memory cards, for example ones with the UHS (Ultra High Speed data transfer feature), may become extremely hot due to continuous access to the memory cards. In such a case, wait for a while before removing the memory card until it cools down.

Using Your VAIO Computer >

Using the Internet

n

66

N

Using the Internet

Before using the Internet, you need to sign up with an Internet Service Provider (ISP) and set up devices required for connecting your computer to the Internet.

The following types of Internet connection services may be available from your ISP:

❑ Fiber to the Home (FTTH)

❑ Digital Subscriber Line (DSL)

❑ Cable modem

❑ Satellite

❑ Dial-up

For detailed information on devices required for Internet access and how to connect your computer to the Internet, ask your

ISP.

To connect your computer to the Internet using the wireless LAN function, you need to set up the wireless LAN network. See Using the Wireless LAN

(page 68)

for more information.

!

When you connect your computer to the Internet, be sure to take appropriate security measures to protect the computer against online threats.

Depending on the service contract with your ISP, you may need to connect an external modem device, for example a USB telephone modem, a DSL modem, or a cable modem, to your computer to connect to the Internet. For detailed instructions on connection setups and modem configuration, see the manual that came with your modem.

Using Your VAIO Computer >

Using the Network (LAN)

n

67

N

Using the Network (LAN)

You can connect your computer to 1000BASE-T/100BASE-TX/10BASE-T type networks with a LAN cable. Connect one end of a LAN cable (not supplied) to the LAN port on the computer or the docking station and the other end to your network. For detailed settings and devices required for LAN access, ask your network administrator.

You can connect your computer to any network without changing the default settings.

!

Do not plug a telephone cable into the LAN port on your computer.

If the LAN port is connected to one of the telephone lines mentioned below, high electric current to the port may cause damage, overheating, or fire.

- Home (intercom speakerphone) or business-use telephone lines (multi-line business telephone)

- Public telephone subscriber line

- Private branch exchange (PBX)

Using Your VAIO Computer >

Using the Wireless LAN

Using the Wireless LAN

The Wireless LAN (WLAN) allows your computer to connect to a network through a wireless connection.

The WLAN uses the following IEEE 802.11a/b/g/n standard, which specifies the type of technology used.

See the specifications to find out about the configuration of your computer.

n

68

N

WLAN standard

IEEE 802.11a

IEEE 802.11b/g

IEEE 802.11n

Frequency band

5 GHz

2.4 GHz

5 GHz/2.4 GHz

Remarks

Available only on models compliant with the IEEE 802.11a/b/g/n standard.

The IEEE 802.11g standard provides higher-speed communications than the IEEE 802.11b standard.

On models compliant with the IEEE 802.11b/g/n standard, only the 2.4 GHz band can be used.

Using Your VAIO Computer >

Using the Wireless LAN

n

69

N

Notes on Using the Wireless LAN Function

General notes on using the wireless LAN function

❑ In some countries or regions, using WLAN products may be restricted by the local regulations (e.g. limited number of channels).

❑ The IEEE 802.11a standard and the IEEE 802.11n standard are not available on ad-hoc networks.

❑ The 2.4 GHz band, with which wireless LAN devices work, is used by various devices. Although the wireless LAN devices use the technology to minimize radio interference from other devices that use the same band, such radio interference may cause slower communication speeds and narrower communication ranges or communication failures.

❑ The communication speed and range may vary depending on the following conditions:

❑ Distance between communication devices

❑ Existence of obstacles between devices

❑ Device configuration

❑ Radio conditions

❑ Ambient environment that includes existence of walls and materials of such walls

❑ Software in use

❑ Communications may be cut off depending on radio conditions.

❑ Actual communication speed may not be as fast as the one displayed on your computer.

❑ Deploying WLAN products compliant with different standards that use the same band on the same wireless network may reduce the communication speed due to radio interference. Taking this into consideration, WLAN products are designed to reduce the communication speed to ensure communications with another WLAN product if it is compliant with a different standard that uses the same band. When the communication speed is not as fast as expected, changing the wireless channel on the access point may increase the communication speed.

Using Your VAIO Computer >

Using the Wireless LAN

n

70

N

Note on the data encryption

The WLAN standard includes the encryption methods: Wired Equivalent Privacy (WEP), which is a security protocol, Wi-Fi

Protected Access 2 (WPA2), and Wi-Fi Protected Access (WPA). Proposed jointly by the IEEE and Wi-Fi Alliance, both WPA2 and WPA are specifications of standards based on interoperable security enhancements that increase the level of data protection and access control for existing Wi-Fi networks. WPA is designed to be forward compatible with the IEEE 802.11i specification. It utilizes the enhanced data encryption Temporal Key Integrity Protocol (TKIP) in addition to user authentication using 802.1X and Extensible Authentication Protocol (EAP). Data encryption protects the vulnerable wireless link between clients and access points. Besides that, there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption, virtual private networks, and authentication. WPA2, the second generation of

WPA, provides stronger data protection and network access control and is also designed to secure all versions of 802.11 devices, including 802.11b, 802.11a, 802.11g, and 802.11n standards, multi-band and multi-mode. In addition, based on the ratified IEEE 802.11i standard, WPA2 provides government grade security by implementing the National Institute of

Standards and Technology (NIST) FIPS 140-2 compliant AES encryption algorithm and 802.1X-based authentication. WPA2 is backward compatible with WPA.

Using Your VAIO Computer >

Using the Wireless LAN

n

71

N

Starting Wireless LAN Communications

You first need to establish wireless LAN communications between your computer and an access point (not supplied). See

Windows Help and Support for more information. For help on setting up a wireless network, click Start, All Programs, and

VAIO Easy Connect, and then follow the on-screen instructions of the Easy Internet Connection Setup.

!

For details on how to select the channel that will be used by the access point, see the manual that came with your access point.

To start wireless LAN communications

1

Make sure an access point is set up.

See the manual that came with your access point for more information.

2

Turn on the WIRELESS switch.

3

Click Start, All Programs, and VAIO Smart Network or click the VAIO Smart Network icon on the taskbar.

4

Click the switch next to Wireless LAN to toggle it to On in the VAIO Smart Network window.

Make sure the WIRELESS indicator light turns on.

!

5 GHz band wireless LAN communications, available on selected models only, are disabled by default. To enable 5 GHz band communication, you need to select the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands from the drop-down list for Wireless LAN Settings in the VAIO Smart

Network settings window.

5

Click or on the taskbar.

6

Select the desired access point and click Connect.

Using Your VAIO Computer >

Using the Wireless LAN

Stopping Wireless LAN Communications

To stop wireless LAN communications

Click the switch next to Wireless LAN to toggle it to Off in the VAIO Smart Network window.

!

Turning off the wireless LAN function while accessing remote documents, files, or resources may result in data loss.

n

72

N

Using Your VAIO Computer >

Using the Wireless WAN

n

73

N

Using the Wireless WAN

Using the wireless WAN (WWAN) allows your computer to connect to the Internet through the wireless network wherever there is the mobile phone coverage.

The WWAN may not be available in some countries or regions.

Some features and options in this section may not be available on your computer.

See the specifications to find out about the configuration of your computer.

Using Your VAIO Computer >

Using the Wireless WAN

n

74

N

Inserting a SIM Card

To use the wireless WAN function, you first need to insert a SIM card into the SIM card slot on your computer. Your SIM card is contained within a base plate, about the size of a credit card.

Depending on your country and model, you might receive an offer from the VAIO selected telecom operator. In that case the SIM card is either in the operator SIM pack inside the carton box or already inserted in the SIM card slot. If the SIM card is not provided with your computer, you can purchase one from your preferred telecom operator.

To insert a SIM card

1

Turn off your computer.

2

Insert a thin, straight object (such as a paper clip) into the hole (1) in the SIM card holder (2) so that the holder pops out.

3

Gently take hold of the SIM card holder and pull it out of the slot.

Using Your VAIO Computer >

Using the Wireless WAN

4

Remove the SIM card (3) by pushing it out from the base plate.

5

Put the SIM card on the SIM card holder with its printed circuit side up.

n

75

N

Using Your VAIO Computer >

Using the Wireless WAN

6

Insert the SIM card holder into the SIM card slot.

!

Do not touch the printed circuit on the SIM card. Be sure to hold your computer firmly before inserting or removing the SIM card holder.

Do not damage the SIM card in any way, either by bending or exerting pressure on the card.

n

76

N

Using Your VAIO Computer >

Using the Wireless WAN

n

77

N

Starting the Wireless WAN Communications

To start the wireless WAN communications

!

Make sure that the SIM card holder is properly inserted into the SIM card slot, otherwise the wireless WAN function may not work.

1

Turn on the WIRELESS switch.

2

Click Start, All Programs, and VAIO Smart Network or click the VAIO Smart Network icon on the taskbar.

3

In the VAIO Smart Network window, make sure that the switch next to Wireless WAN is On.

4

Click the down arrow button next to the Wireless WAN switch and the Connect button to launch your connection manager software or the preinstalled software from a telecom operator depending on your model or country.

5

Enter your PIN code when prompted.

6

Click Connect.

7

If requested, enter the APN information of your telecom operator.

For more information on how to use the wireless WAN function, see the help file included with the VAIO Smart Network or your telecom operator's documentation.

Using Your VAIO Computer >

Using the BLUETOOTH Function

n

78

N

Using the BLUETOOTH Function

You can establish wireless communications between your computer and other BLUETOOTH

®

devices such as another computer or a mobile phone. You can transfer data between these devices without cables at a range of up to 10 meters in an open area.

BLUETOOTH Security

The BLUETOOTH wireless technology has an authentication function, which allows you to determine with whom you choose to communicate. With the authentication function, you can prevent any anonymous BLUETOOTH devices from accessing your computer.

The first time two BLUETOOTH devices communicate, a common passkey (a password required for authentication) should be determined for both devices to be registered. Once a device is registered, there is no need to re-enter the passkey.

The passkey can be different each time, but must be the same at both ends.

For certain devices, such as a mouse, no passkey can be entered.

Using Your VAIO Computer >

Using the BLUETOOTH Function

n

79

N

Communicating with Another BLUETOOTH Device

You can connect your computer to a BLUETOOTH device such as another computer, a mobile phone, a PDA, a headset, a mouse, or a digital camera without the use of any cables.

Using Your VAIO Computer >

Using the BLUETOOTH Function

n

80

N

To communicate with another BLUETOOTH device

To communicate with another BLUETOOTH device, you first need to set up the BLUETOOTH function. For information on setting up and using the BLUETOOTH function, see Windows Help and Support.

1

Turn on the WIRELESS switch.

2

Click Start, All Programs, and VAIO Smart Network or click the VAIO Smart Network icon on the taskbar.

3

Click the switch next to BLUETOOTH to toggle it to On in the VAIO Smart Network window.

Make sure the WIRELESS indicator light turns on.

Using Your VAIO Computer >

Using the BLUETOOTH Function

Stopping BLUETOOTH Communications

To stop BLUETOOTH communications

1

Turn off the BLUETOOTH device that is communicating with your computer.

2

Click the switch next to BLUETOOTH to toggle it to Off in the VAIO Smart Network window.

n

81

N

Using Your VAIO Computer >

Using the BLUETOOTH Function

n

82

N

Notes on Using the BLUETOOTH Function

❑ The data transfer rate varies, depending on the following conditions:

❑ Obstacles, such as walls, located between devices

❑ Distance between devices

❑ Material used in walls

❑ Proximity to microwaves and cordless telephones

❑ Radio frequency interference and other environmental conditions

❑ Device configuration

❑ Type of software application

❑ Type of operating system

❑ Use of both wireless LAN and BLUETOOTH functions at the same time on your computer

❑ Size of file being exchanged

❑ Large files may occasionally be corrupted during continuous transfer due to limitations of the BLUETOOTH standard and electromagnetic interference in the environment.

❑ All BLUETOOTH devices must be certified to make sure that the applicable standard requirements are maintained. Even if standards are met, individual device performance, specifications, and operation procedures can vary. Data exchange may not be possible in all situations.

❑ Video and audio may not be synchronized if you play videos on your computer with audio output from a connected

BLUETOOTH device. This is a frequent occurrence with BLUETOOTH technology and does not indicate a malfunction.

❑ The 2.4 GHz band, with which BLUETOOTH devices or wireless LAN devices work, is used by various devices. Although

BLUETOOTH devices use the technology to minimize radio interference from other devices that use the same band, such radio interference may cause slower communication speeds and shorter distances or communication failures.

Using Your VAIO Computer >

Using the BLUETOOTH Function

n

83

❑ The BLUETOOTH function may not work with other devices, depending on the manufacturer or the software version employed by the manufacturer.

❑ Connecting multiple BLUETOOTH devices to your computer may cause channel congestion, resulting in poor performance of the devices. This is normal with BLUETOOTH technology and does not indicate a malfunction.

❑ High-speed communications between your computer and BLUETOOTH devices are available when they are compliant with BLUETOOTH Core Specification Version 3.0 + HS. For the high-speed communications, enable both the wireless

LAN and BLUETOOTH functions on the computer.

See the specifications to find out about the configuration of your computer.

N

Using Your VAIO Computer >

Using Fingerprint Authentication

n

84

N

Using Fingerprint Authentication

Your computer is equipped with a fingerprint sensor to provide you with additional convenience.

Once you have registered your fingerprint(s), the fingerprint authentication function offers:

❑ A substitute for password entry to log onto Windows

(page 88)

If you have registered your fingerprints for your user account, you can substitute fingerprint authentication for password entry when logging onto Windows.

Website Log On for quick web site access

Once you have registered your user information (user accounts, passwords, etc.) for web sites in the Website Log On, you can substitute fingerprint authentication for entering information required to access the password-protected web sites.

For detailed information, see the help file included with the TrueSuite.

To see the help file, click Start, All Programs, TrueSuite, and TrueSuite.

!

You may not be able to use the Website Log On feature depending on the web site you access.

Quick Launch function for quick application access

The Quick Launch feature is available on your computer for launching your preferred application (executable file) that is assigned to one of your fingers with a registered fingerprint. Once you have assigned an application to your finger, you can launch the assigned application simply by swiping the finger across the fingerprint sensor.

Using Your VAIO Computer >

Using Fingerprint Authentication

Registering a Fingerprint

To use the fingerprint authentication function, you must register your fingerprint(s) in your computer.

To register a fingerprint

1

Click Start, All Programs, TrueSuite, and TrueSuite.

2

Click Get Started.

3

Follow the on-screen instructions.

If the Windows password setting window appears, set the Windows password.

See the help file included with the TrueSuite for more detailed information.

n

85

N

Using Your VAIO Computer >

Using Fingerprint Authentication

If you have failed to register a fingerprint, follow these steps to try again.

1

Place the top joint of your finger flat in the center of the fingerprint sensor (1).

n

86

N

2

Swipe your finger perpendicularly across the fingerprint sensor and scan from the top joint of the finger to the fingertip.

Using Your VAIO Computer >

Using Fingerprint Authentication

n

!

Keep your finger in contact with the fingerprint sensor while swiping.

Fingerprint registration may fail if you move your finger too quickly or too slowly. Let the fingerprint sensor take about one second to scan your fingerprint.

You may not be able to register and/or have your fingerprint(s) recognized if your finger is too dry or wet, wrinkled, injured, dirty, etc.

Register more than one fingerprint in case that the fingerprint sensor fails to recognize the fingerprint.

Be sure to clean your fingertip(s) and the fingerprint sensor before swiping in order to keep good recognition performance.

87

N

Using Your VAIO Computer >

Using Fingerprint Authentication

n

88

N

Logging Onto Windows

To use the fingerprint authentication function in place of Windows password entry to log onto your system, you need to set the Windows password and configure your computer for fingerprint authentication. For information on how to set the Windows password, see Setting the Password

(page 128)

.

To log onto Windows

Swipe the registered finger across the fingerprint sensor when the Windows log-on screen appears. For detailed information, see the help file included with the TrueSuite.

Using Your VAIO Computer >

Using the TPM

n

89

N

Using the TPM

The Trusted Platform Module (TPM) may be embedded in your computer to provide basic security functions. In combination with the TPM, you can encrypt and decrypt your data to strengthen computer security against inappropriate access.

Some features and options in this section may not be available on your computer.

See the specifications to find out about the configuration of your computer.

TPMs are defined by Trusted Computing Group (TCG) and also called security chips.

Using Your VAIO Computer >

Using the TPM

n

90

N

Important Notice

Notes on encrypting the operating system or program files

Encrypting files used by your operating system or any software application, using the Encrypting File System (EFS) with the

TPM, will disable you to launch or operate such software.

To avoid such problems, observe the following before using the EFS:

❑ Be sure to save data you want to encrypt to the following destinations:

❑ The Encrypted Data folder created with the default settings in the user initialization process

❑ A new encrypted folder created in the My Documents folder or the Documents folder on your account

❑ The Personal Secure Drive

The Personal Secure Drive is a virtual drive that is created by using the Personal Secure Drive feature and automatically encrypts data that is saved to it.

❑ Do not change the following settings on the View tab in the Folder Options window displayed by clicking Folder and

search options from Organize in the menu of Windows Explorer.

Don't show hidden files, folders, or drives

Hide protected operating system files (Recommended)

❑ Do not change the system attributes of the files, unless necessary.

❑ Do not encrypt the Windows folder, the Program Files folder, and all files in each folder.

❑ Do not encrypt the Users folder and all account folders in it.

Using Your VAIO Computer >

Using the TPM

n

91

N

Notes on encrypting key files or files on the Personal Secure Drive

Encrypting files created in the following folders when your user account is initialized and the EFS is enabled will disable you to launch your TPM software and decrypt the encrypted data.

With the default settings, the files in the folders below cannot be encrypted because they have system attributes.

Do not change the system attributes of the files in the folders below.

!

The following folders are hidden by default.

❑ Folders containing key files

❑ C:\ProgramData\Infineon

❑ C:\Users\All Users\Infineon

(C:\Users\All Users is a shortcut to C:\ProgramData.)

❑ C:\Users\<account>\AppData\Roaming\Infineon

❑ Files on the Personal Secure Drive

C:\Security Platform\Personal Secure Drive\System Data\xxx.FSF

Using Your VAIO Computer >

Using the TPM

n

92

N

Notes on encrypting backup files or other files

Encrypting backup archive files or emergency recovery token files will disable you to recover your computer system for emergency, and encrypting password reset token files or secret files will disable you to reset the password.

Do not encrypt the following files or folders:

The default path for files below or displayed by clicking Browse is My Documents (or Documents)\Security Platform or Security Platform in removal media.

❑ Automatic backup archive file

Default file name: SPSystemBackup.xml or SPSystemBackup_<your computer name>.xml

❑ Storage folder for automatic backup archive files

Folder name (Fixed):

❑ SPSystemBackup (The folder is created as the subfolder for the SPSystemBackup.xml file.)

❑ SPSystemBackup_<your computer name> (The folder is created as the subfolder for SPSystemBackup_<your computer name>.xml file.)

❑ Emergency recovery token file

Default file name: SPEmRecToken.xml

❑ Password reset token file

Default file name: SPPwResetToken.xml

❑ Token file for emergency recovery/password reset

Default file name: SPToken_<your computer name>.xml

❑ Password reset secret file

Default file name: SPPwdResetSecret.xml or SPPwdResetSecret_<your computer name>_<user name>.<domain name>.xml

Using Your VAIO Computer >

Using the TPM

❑ Key and certificate backup file

Default file name: SpBackupArchive.xml

❑ PSD backup file

Default file name: <Drive name>-Personal Secure Drive.fsb

❑ Owner password backup file

Default file name: SpOwner_<your computer name>.tpm

❑ Protocol file

Default file name: SpProtocol_<your computer name>_<user name>.<domain name>.txt

n

93

N

Using Your VAIO Computer >

Using the TPM

n

94

N

Configuring the TPM

To use the embedded TPM, you need to:

1

Enable the TPM in the BIOS setup screen.

2

Install the Infineon TPM Professional Package.

3

Initialize and configure the TPM.

To enable the TPM in the BIOS setup screen

1

Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.

The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.

!

The VAIO logo does not appear when Fast BIOS Startup Settings on the VAIO Control Center is enabled. Disable the settings with the VAIO Control

Center (page 163)

.

2

Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key.

3

Press the M or m key to select Enable and then the Enter key.

4

Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.

5

After your system restarts, select Execute in the confirmation window and then press the Enter key.

You can also disable the TPM and clear the TPM configuration in the BIOS setup screen.

!

Before enabling the TPM, be sure to set the power-on password to protect against unauthorized modification of the TPM configuration.

If the TPM is enabled, it will take longer before the VAIO logo appears due to security checks at computer startup.

You will not be able to access any TPM-protected data if you clear the TPM ownership. Before clearing the TPM configuration, be sure to make backup copies of the TPM-protected data.

Using Your VAIO Computer >

Using the TPM

n

95

N

To install the Infineon TPM Professional Package

Read the Readme.txt in the C:\Infineon\Readme folder. Then, double-click setup.exe in the C:\Infineon folder to install the package.

To install this package, you must have administrative rights on the computer.

!

You need to set a few passwords while installing the Infineon TPM Professional Package. Without these passwords, you will not be able to restore any TPM-protected data or backup files. Be sure to write down the passwords and keep them safe and private from other people.

To initialize and configure the TPM

See the on-screen documentation for detailed information. To open the documentation, click Start, All Programs, Infineon

Security Platform Solution, and Help.

!

The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liability for any defects arising out of your data maintenance and management.

Using Your VAIO Computer >

Using the TPM

n

96

N

Using BitLocker Drive Encryption with the TPM

BitLocker Drive Encryption is a data encryption feature that is available on models with Windows 7 Ultimate or Windows 7

Enterprise. Enabling BitLocker Drive Encryption in conjunction with the TPM encrypts all data on the built-in storage device.

For detailed information on how to use and configure BitLocker Drive Encryption, see Windows Help and Support.

See the specifications to find out about the configuration of your computer.

Notes on using BitLocker Drive Encryption

❑ Be sure to initialize the TPM with the Infineon TPM Professional Package before enabling BitLocker Drive Encryption.

If you enable it without initializing the TPM, a TPM owner password is not generated, so you will not be able to configure the Infineon TPM Professional Package.

❑ The Infineon TPM Professional Package does not make a backup copy of a file (recovery password) for BitLocker

Drive Encryption.

❑ An additional BitLocker system partition has been pre-configured. This system partition uses 100 MB of your total builtin storage device volume.

❑ You must enable the TPM in the BIOS setup screen in order to turn on BitLocker Drive Encryption.

❑ Do not encrypt data on a storage device (such as a USB flash memory device) on which a recovery key is stored using

BitLocker Drive Encryption.

Using Your VAIO Computer >

Using the TPM

n

97

N

To unlock the encrypted data with a recovery key stored on a USB flash memory device

To unlock the encrypted data with a recovery key stored on a USB flash memory device, your system needs to access the

USB flash memory device when you boot the computer. Follow these steps to configure the boot order in the BIOS setup screen:

1

Connect a USB flash memory device.

2

Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.

The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.

!

The VAIO logo does not appear when Fast BIOS Startup Settings on the VAIO Control Center is enabled. Disable the settings with the VAIO Control

Center (page 163)

.

3

Press the < or , key to select the Security tab, the M or m key to select Change TPM State, and then the Enter key.

4

Press the M or m key to select Enable and then the Enter key.

5

Press the < or , key to select Boot and then select Enabled for External Device Boot.

6

Press the M or m key to select Boot Priority and then the Enter key.

7

Press the F5 or F6 key to change the boot device order so that Internal Hard Disk is listed higher than External Device.

!

You need to move Internal Optical Drive to the top of the list to recover the computer system using your Recovery Media.

8

Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.

9

After your system restarts, select Execute in the confirmation window and then press the Enter key.

10 Follow the instructions in Windows Help and Support to enable BitLocker Drive Encryption.

11 Save the recovery password to the USB flash memory device in the window for saving the recovery password.

12 Follow the on-screen instructions.

The encryption process will start.

Using Your VAIO Computer >

Using the TPM

n

98

!

Updating your BIOS with updating software, such as the VAIO Update, changes the BIOS settings back to the default. You need to repeat the steps above again.

It takes several hours to complete the encryption process.

N

Using Peripheral Devices >

Using Peripheral Devices

You can add functionality to your VAIO computer by using the various ports on the computer.

Using the Noise Canceling Headphones

(page 100)

Connecting a Docking Station

(page 107)

Connecting External Speakers or Headphones

(page 115)

Connecting an External Display

(page 116)

Selecting Display Modes

(page 122)

Using the Multiple Monitors Function

(page 123)

Connecting a USB Device

(page 125)

n

99

N

Using Peripheral Devices >

Using the Noise Canceling Headphones

n

100

N

Using the Noise Canceling Headphones

A pair of noise canceling headphones may be supplied with your computer.

Some features and options in this section may not be available on your computer.

See the specifications to find out about the configuration of your computer.

Your computer is equipped with the Digital Noise Canceling processor that detects ambient noises and outputs an antiphase wave to reduce the noises.

You can use the noise canceling headphones as a microphone by using the built-in microphone on the headphones.

Using Peripheral Devices >

Using the Noise Canceling Headphones

n

101

N

Before You Use the Noise Canceling Headphones

❑ You can enable the noise canceling function only when the supplied noise canceling headphones are connected to the headphones jack that supports this function.

❑ The noise canceling function does not work on sound output with the following devices:

❑ External speakers

❑ Headphones without the noise canceling function

❑ Sound output devices connected to your computer via a BLUETOOTH connection

❑ The noise canceling function cannot be fully in effect unless you properly wear the headphones. Be sure to fit earpieces of the headphones tightly into your ears.

If you feel that the noise canceling function has little effect, adjust the earbud position in the earpieces of the noise canceling headphones or replace the earbuds with a pair in another size. A pair of medium-size earbuds is attached to the earpieces by default and there should be an extra pair in each small and large sizes supplied with the headphones.

❑ The noise canceling function is to reduce low-frequency noise in the ambient environment but not high-frequency noise.

Nor is it to implement a 100% noise-free audio environment.

Using Peripheral Devices >

Using the Noise Canceling Headphones

n

102

❑ When the noise canceling function does not seem to be working, unplug the supplied noise canceling headphones completely and then plug them back again.

❑ Keep the built-in microphone (1) of the noise canceling headphones unblocked to ensure that the noise canceling function can be fully in effect.

N

❑ You may hear a soft hissing noise while the noise canceling function is enabled. This is just operational noise that the function generates and does not indicate a malfunction.

❑ You may feel that the noise canceling function has little effect or ambient noises seem even louder, depending on the type of noise or the degree of quietness in your environment. In such a case, disable the noise canceling function.

❑ Use of a mobile phone may cause radio interference with the noise canceling headphones. When using the headphones, keep mobile phones away from the headphones.

❑ Plugging or unplugging the noise canceling headphones generates noise. This is normal and does not indicate a malfunction. Be sure to take off the headphones from your ears before plugging or unplugging the headphones.

❑ Be sure to use the supplied noise canceling headphones. You can plug the headphones supplied with a Walkman ®

to your computer but the noise canceling function of the computer will not work well with such headphones.

❑ If you configure your noise canceling headphones to pick up sounds from its built-in microphone and output them through the earpieces, the sounds will be amplified. Be careful about the volume when you change the configuration.

Using Peripheral Devices >

Using the Noise Canceling Headphones

n

103

N

Connecting the Noise Canceling Headphones

To connect the noise canceling headphones

Plug the headphones cable into the headphones jack i.

The icon appears on the taskbar to indicate that the noise canceling function is enabled and a balloon message pops up from the icon.

When the the menu.

icon is on the taskbar, the noise canceling function is disabled. Right-click the icon and select Enable Noise Canceling Function from

Using Peripheral Devices >

Using the Noise Canceling Headphones

n

104

N

Adjusting the Effect of the Noise Canceling Function

The noise canceling headphones supplied with your computer is configured to yield the optimum effect by default.

If you feel that the noise canceling function is not fully in effect, you may be able to adjust the effect with the Noise Canceling

Optimization slider on the Noise Canceling Headphones window.

To adjust the effect of the noise canceling function

1

Right-click the icon on the taskbar and select Settings....

2

Drag the Noise Canceling Optimization slider to select your desired noise canceling level.

The slider should be at the center of the range to yield the optimum level. Dragging the slider all the way to the maximum level does not bring the noise canceling function fully into effect.

3

Click Apply.

4

Confirm that the noise canceling effect is satisfactory and then click OK.

Using Peripheral Devices >

Using the Noise Canceling Headphones

n

105

N

Using the microphone directivity function

Just like an ordinary microphone, the built-in microphone of the noise canceling headphones picks up ambient sounds coming from all directions. The microphone directivity (beamforming) function, however, can reduce ambient noises and pick up mainly your voice and sounds coming from your front and rear.

The microphone directivity function comes in handy when you want your voice to sound clearly while chatting or when you want to use the headphones as a microphone to record your own voice or sounds coming from your front.

To enable the microphone directivity function

1

Right-click the icon on the taskbar and select Settings....

2

Click the Microphone directivity tab and select the Enable the microphone directivity function check box.

3

Click OK.

!

When ambient noises are extremely loud, the microphone directivity function may not become fully in effect or the volume level of the noises may fluctuate at short intervals.

The microphone directivity function is designed to be used only where ambient noises are loud. Disable the function where ambient noises are low.

Using Peripheral Devices >

Using the Noise Canceling Headphones

What to do if the balloon does not appear

When the balloon message does not appear, change the noise canceling function settings.

To display the balloon message

1

Click Start and Control Panel.

2

Click Hardware and Sound.

3

Click Manage audio devices under Sound.

4

On the Playback tab, double-click the speakers or headphones icon.

5

Click the Enhancements tab.

6

Click to select the Noise Canceling Function check box and click Modify Settings.

If the Disable all enhancements check box is selected, click to cancel the check box.

7

Click to select the Display a message when noise canceling headphones are connected check box.

8

Click OK.

n

106

N

Using Peripheral Devices >

Connecting a Docking Station

n

107

N

Connecting a Docking Station

A docking station may be supplied with your computer.

Connecting the supplied or optional docking station to your computer enables you to use optical disc media with the computer and connect additional peripherals to the computer, such as a printer and an external display.

Some features and options in this section may not be available on your computer.

See the specifications to find out about the configuration of your computer.

Locating Ports on the Docking Station

A

USB port

*1

(page 125)

B

USB port

*2

(page 125)

C

LAN port (page 67)

D

HDMI output port

(page 118)

E

Monitor port

(page 116)

F

Connector cable

G

Security slot

H

DC IN port (page 109)

I

Docking Station connector

(page 109) ,

(page 112)

J

UNDOCK button (page 112)

K

IN USE indicator

(page 112)

Illuminates while the communication between the docking station and the computer is active.

*1

Compliant with the USB 2.0 standard.

*2

Compliant with the USB 2.0/3.0 standards. USB ports that are compliant with the USB 3.0 standard are identifiable by their blue color.

Using Peripheral Devices >

Connecting a Docking Station

n

108

N

A

USB port

*

(page 125)

B

Air vents

C

Optical disc drive (page 47)

D

Power indicator

Illuminates in green when the docking station is turned on, blinks in orange while your computer is in Sleep mode, and blinks in yellow while data access to the optical disc drive is in progress.

E

Disc eject button (page 43) ,

(page 47)

* Compliant with the USB 2.0 standard.

!

The docking station can be powered only through the AC adapter supplied with the docking station. Do not unplug the AC adapter from the docking station or the AC outlet while using the docking station. This may cause data damage or hardware malfunctions.

Using Peripheral Devices >

Connecting a Docking Station

Connecting the Docking Station to Your Computer

To connect the docking station to your computer

1

Attach the docking station to the supplied vertical stand.

!

Do not stand the docking station upside down. Be sure to attach it as illustrated above left.

If you do not use the supplied vertical stand when using the docking station, you can lay down the docking station as illustrated below.

2

Plug one end of the power cord (1) into the AC adapter (2) and the other end into an AC outlet.

n

109

N

Using Peripheral Devices >

Connecting a Docking Station

3

Plug the cable connected to the AC adapter (2) into the DC IN port (3) on the docking station (4).

n

110

N

!

Do not use the AC adapter supplied with your computer. Be sure to use the AC adapter supplied with the docking station.

Using Peripheral Devices >

Connecting a Docking Station

4

Plug the Docking Station connector to both the Docking Station/USB port and the DC IN port on your computer.

n

111

N

Using Peripheral Devices >

Connecting a Docking Station

n

112

N

Disconnecting the Docking Station from Your Computer

!

Make sure that no devices connected to the docking station are in use before disconnecting it from your computer.

Do not disconnect docking station from your computer while the IN USE indicator light is lit. Disconnecting the docking station while the IN USE indicator light is lit may result in loss of unsaved data, no response from the computer, or a failure of the computer. If the computer stops responding, see What should I do if my computer or software stops responding?

(page 159)

.

Be sure to press the UNDOCK button and wait until the IN USE indicator light turns off before disconnecting the docking station from your computer even when the computer is in Hibernate mode or Sleep mode.

When the battery pack is running out of power, disconnecting the docking station from your computer may result in loss of unsaved data.

Using Peripheral Devices >

Connecting a Docking Station

n

113

N

To disconnect the docking station from your computer

1

Close certain software applications, such as using the graphics accelerator or accessing the optical disc drive or the USB port on the docking station.

2

Press the UNDOCK button (1) and wait until the IN USE indicator light (2) turns off.

3

Hold the Docking Station connector and unplug it from your computer.

If the IN USE indicator light is unlit, you do not have to press the UNDOCK button.

Using Peripheral Devices >

Connecting a Docking Station

n

114

N

Alternatively, you can disconnect the docking station from the computer as follows:

1

Click Start, the arrow next to the Shut down button, and Undock.

2

Make sure that a message balloon appears and the IN USE indicator light turns off. Then unplug the Docking Station connector from the computer.

To disconnect the docking station completely from AC power, unplug the AC adapter.

Using Peripheral Devices >

Connecting External Speakers or Headphones

Connecting External Speakers or Headphones

You can connect external sound output devices (not supplied), such as speakers or headphones, to your computer.

To connect external speakers

Make sure your speakers are designed for computer use.

!

Turn down the volume of the speakers before you turn them on.

The noise canceling function does not work on sound output through external speakers.

Connect external speakers (1) to the headphones jack (2) i with a speaker cable (3) (not supplied).

n

115

N

Using Peripheral Devices >

Connecting an External Display

n

116

N

Connecting an External Display

Some features and options in this section may not be available on your computer.

Connecting a Computer Display or a Projector

You can connect an external display, such as a computer display or a projector, either directly to your computer or via the docking station.

To connect a computer display or a projector

1

Plug the power cord (1) of your external display or the projector into an AC outlet.

2

Connect the external display or the projector to the monitor port (2) on the computer or the docking station with a display cable (3).

Using Peripheral Devices >

Connecting an External Display

n

117

N

If necessary, connect the headphones jack on the projector and the headphones jack (4) i on the computer with a speaker cable (5).

!

Your computer is compliant with the HDCP standard and capable of encrypting the transmission channel of digital video signals for the purpose of copyright protection, which enables you to play and view a wide variety of copyright protected and high-quality content. To view the copyright protected content, connect an HDCP-compliant monitor to the HDMI output port on your computer or the docking station. If your computer has a non-compliant monitor connected, you will not be able to play or view any copyright protected content.

If the external computer display is equipped with an HDMI input port, plug one end of an HDMI cable into the HDMI output port on the computer or the docking station and the other end into the HDMI input port on the computer display.

To connect a TFT/DVI monitor, use an HDMI to DVI-D adapter to connect it to the HDMI output port on the computer or the docking station.

DVI-D stands for Digital Visual Interface - Digital. It is a type of DVI port that supports only digital video signals (no analog video signals). It has 24 pins.

A DVI-I (Digital Visual Interface - Integrated) port supports digital video and analog video signals. It has 29 pins.

The HDMI cable carries both video and audio signals.

Using Peripheral Devices >

Connecting an External Display

n

118

N

Connecting a TV with an HDMI Input Port

You can connect a TV with an HDMI input port to your computer.

To connect a TV to your computer

!

To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For detailed instructions, see How

do I change the sound output device?

(page 200)

.

1

Plug the power cord of your TV (1) into an AC outlet.

2

Plug one end of an HDMI cable (2) to the HDMI output port (3) on the computer or the docking station and the other end to the TV.

3

Switch the input channel of the TV to external input.

4

Set up the TV configuration system.

!

If a device driver other than the one provided by Sony is used, the image will not be displayed and the audio will not be heard. Always use the device driver provided by Sony for updates.

Using Peripheral Devices >

Connecting an External Display

See the manual that came with your TV for more information on installation and use.

The HDMI cable carries both video and audio signals.

n

119

N

Using Peripheral Devices >

Connecting an External Display

n

120

N

To play Blu-ray 3D Disc media

Some features and options may not be available on your computer.

See the specifications to find out about the configuration of your computer.

On models with the Blu-ray Disc Drive, you can play Blu-ray 3D

Disc media and view 3D images on a 3D-capable display, such as a 3D TV, by connecting the display to the computer or the docking station with an HDMI cable.

!

Be sure to use the 3D glasses specified by the TV manufacturer while viewing 3D images.

See the manual that came with your 3D TV for detailed information on the 3D function.

1

Connect the supplied or optional docking station to your computer (page 109) .

2

Follow the steps in To connect a TV to your computer

(page 118)

for connecting your 3D TV to the computer or the

docking station with an HDMI cable and set up the TV configuration system.

3

Press the Fn+F7 keys and click Settings.

4

Select External Display mode and change the settings to display images only on the external display (page 137)

.

5

Click Start, All Programs, CyberLink PowerDVD BD, and CyberLink PowerDVD BD.

6

Click located at the lower right corner of the PowerDVD BD window, enable the 3D function, and click Auto Detect.

You can change the screen resolution of your computer. Click located at the lower right corner of the PowerDVD BD window and the menu item for changing the screen resolution.

See the help file included with the PowerDVD BD for more information.

7

Insert Blu-ray 3D Disc media into the optical disc drive.

Using Peripheral Devices >

Connecting an External Display

n

121

N

To connect a high-quality digital sound output device between your computer and a TV

You can connect a high-quality home theater receiver or other surround sound decoder devices between your computer and

TV using an HDMI connection.

!

Before connecting the device to the computer, make sure the HDMI connection has been set up between the TV and the home theater receiver or surround sound decoder device first.

To hear sound from the device connected to the HDMI output port, you need to change the device for sound output. For detailed instructions, see How

do I change the sound output device?

(page 200)

.

1

Turn on the TV and set its input to the HDMI input.

2

Turn on the home theater receiver or surround sound decoder device and set its input to the HDMI input.

3

Plug one end of an HDMI cable to the HDMI input port on the home theater receiver or surround sound decoder device and the other end to the HDMI output port on the computer or the docking station.

You can adjust the screen resolution of the connected TV with your computer. See Why doesn't my screen display a video?

(page 190)

for more

information.

With the HDMI connection, the volume can be adjusted by the connected audio device only. Your computer has no control over the output volume of any connected devices.

Using Peripheral Devices >

Selecting Display Modes

n

122

N

Selecting Display Modes

When an external display is connected, you can select either your computer screen or the connected display to use as the primary monitor.

!

If the supplied or optional docking station is connected to your computer, be sure to close certain running software applications, such as game software, video playback software, or web browsers, before selecting a display mode.

You may not be able to display the same content on your computer screen and the external display or projector at the same time, depending on the type of your external display or projector.

Turn on the external display before turning on your computer.

To select a display mode with the Fn+F7 keys

You can select a display mode with the Fn+F7 keys. See Combinations and Functions with the Fn Key

(page 37)

for more

information.

When connecting the docking station to your computer, you can also select a graphics mode with the Fn+F7 keys. See

Selecting Graphics Modes (page 137)

for more information.

To select a display mode from the display settings

1

Right-click on the desktop and select Screen resolution.

2

Click the drop-down list next to Multiple Displays, select your desired setting, and then click OK.

!

If Computer Display mode is selected as the graphics mode, you cannot display content on the external display(s) connected to the docking station.

Change the graphics mode settings

(page 137)

.

Using Peripheral Devices >

Using the Multiple Monitors Function

n

123

N

Using the Multiple Monitors Function

The Multiple Monitors function allows you to distribute portions of your desktop across separate displays. For example, if you have an external display connected to your computer, your computer screen and the external display can function as a single desktop.

You can move the cursor from one display to the other. This allows you to drag objects, such as an open application window or a toolbar, from one display to the other.

Using Peripheral Devices >

Using the Multiple Monitors Function

n

124

N

To use the Multiple Monitors function

Your external display may not support the Multiple Monitors function.

Certain software applications may not be compatible with Multiple Monitors settings.

Make sure that your computer does not enter Sleep or Hibernate mode while you are using the Multiple Monitors function, or the computer may not return to Normal mode.

If you set different colors on each display, do not expand a single window across two displays, or your software may not work properly.

1

Right-click on the desktop and select Screen resolution.

2

Click the drop-down list next to Multiple Displays, select Extend these displays, and then click OK.

!

If Computer Display mode is selected as the graphics mode, you cannot display content on the external display(s) connected to the docking station.

Change the graphics mode settings

(page 137)

.

You can set the display colors and resolution for each display and customize the Multiple Monitors function.

Set fewer colors or a lower resolution for each display.

Using Peripheral Devices >

Connecting a USB Device

n

125

N

Connecting a USB Device

You can connect a Universal Serial Bus (USB) device, such as a mouse, a floppy disk drive, a speaker, or a printer, to your computer.

To connect a USB device

1

Choose the USB port (1) you prefer to use.

2

Plug the USB device cable (2) into the USB port.

Using Peripheral Devices >

Connecting a USB Device

n

126

N

To charge a USB device

You can charge a USB device by connecting it to the USB port that can supply power while the computer is off, in Hibernate mode, and in Sleep mode as well as in Normal mode.

1

Connect your computer to an AC outlet with the AC adapter

(page 19) .

2

Click Start, All Programs, and VAIO Control Center.

3

Click Power Management and USB Charging Settings and enable the USB charging settings.

4

Connect a USB device to the USB port (printed CHARGE above it) next to the HDMI output port

(page 14) .

!

When the USB charging settings are enabled, you cannot operate your computer using the remote wake up function with the USB device connected to the USB port that can supply power.

If charging does not start when you connect a USB device to the USB port that can supply power, disconnect the device and try connecting it again.

Notes on connecting a USB device

❑ You may need to install the driver software supplied with your USB device before use. See the manual that came with the

USB device for more information.

❑ Be sure to use a USB printer compatible with your version of Windows to print documents.

❑ For information on how to remove a USB device, see the manual that came with the device.

❑ To protect your computer and/or USB devices from damage, observe the following:

❑ When moving the computer with USB devices connected, avoid exposing the USB ports to shock or impact.

❑ Do not put the computer into a bag or carrying case when it has USB devices connected.

❑ If your computer enters Sleep mode while writing data to a USB device is in progress, the correct data is not written to the USB device.

Customizing Your VAIO Computer >

n

127

N

Customizing Your VAIO Computer

This section briefly describes how to change the main settings of your VAIO computer. Among other things, you will learn how to use and customize the look of your Sony software and utilities.

Setting the Password

(page 128)

Using the VAIO Control Center

(page 135)

Using the VAIO Power Management

(page 136)

Selecting Graphics Modes

(page 137)

Changing the Display Language

(page 139)

Customizing Your VAIO Computer >

Setting the Password

n

128

N

Setting the Password

Setting the password allows you to protect your computer from unauthorized access by making the user enter the password when the computer is turned on or returns to Normal mode from Sleep mode or Hibernate mode.

!

Do not forget your password. Write down the password and keep it in a secure place.

Type of Password

Power-on password

Windows password

Description

You can use BIOS functions to set two types of passwords:

- Machine password: Allows users with administrative rights to change all the setup options in the BIOS setup

screen, as well as to start the computer.

- User password: Allows the standard users to change some of the BIOS setup options, as well as to start the

computer. To set the user password, you must first set the machine password.

Entry of the power-on password will be prompted after the VAIO logo appears to start your computer.

!

If you forget the machine password, the password needs to be reset and a fee will be charged. To reset the password, contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO

Computer (page 5)

.

You can reset the user password at the BIOS setup screen by entering the machine password.

Allows users to log onto your computer and protect each user account with its own password.

Entry of the Windows password will be prompted after you select your user account.

Customizing Your VAIO Computer >

Setting the Password

n

129

N

Setting the Power-on Password

To add the power-on password (machine password)

1

Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.

The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.

!

The VAIO logo does not appear when Fast BIOS Startup Settings on the VAIO Control Center is enabled. Disable the settings with the VAIO Control

Center (page 163)

.

2

Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the

Enter key.

3

On the password entry screen, enter the password twice and press the Enter key.

The password can be up to 32 alphanumeric characters long (including spaces).

4

Select Password when Power On under Security and press the Enter key.

5

Change the setting from Disabled to Enabled.

6

Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.

At the confirmation prompt, press the Enter key.

Customizing Your VAIO Computer >

Setting the Password

n

130

N

To add the power-on password (user password)

!

Make sure you set the machine password before setting the user password.

1

Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.

The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.

!

The VAIO logo does not appear when Fast BIOS Startup Settings on the VAIO Control Center is enabled. Disable the settings with the VAIO Control

Center (page 163)

.

2

Enter the machine password and press the Enter key.

3

Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the

Enter key.

4

On the password entry screen, enter the password twice and press the Enter key.

The password can be up to 32 alphanumeric characters long (including spaces).

5

Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.

At the confirmation prompt, press the Enter key.

Customizing Your VAIO Computer >

Setting the Password

n

131

N

To change or remove the power-on password (machine password)

1

Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.

The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.

!

The VAIO logo does not appear when Fast BIOS Startup Settings on the VAIO Control Center is enabled. Disable the settings with the VAIO Control

Center (page 163)

.

2

Enter the machine password and press the Enter key.

3

Press the < or , key to select Security to display the Security tab, select Set Machine Password, and then press the

Enter key.

4

On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.

To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter key.

5

Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.

At the confirmation prompt, press the Enter key.

Customizing Your VAIO Computer >

Setting the Password

n

132

N

To change or remove the power-on password (user password)

1

Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.

The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.

!

The VAIO logo does not appear when Fast BIOS Startup Settings on the VAIO Control Center is enabled. Disable the settings with the VAIO Control

Center (page 163)

.

2

Enter the user password and press the Enter key.

3

Press the < or , key to select Security to display the Security tab, select Set User Password, and then press the

Enter key.

4

On the password entry screen, enter the current password once and a new password twice, and then press the Enter key.

To remove the password, leave the Enter New Password and Confirm New Password fields blank and press the Enter key.

5

Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.

At the confirmation prompt, press the Enter key.

Customizing Your VAIO Computer >

Setting the Password

Setting the Windows Password

To add the Windows password

1

Click Start and Control Panel.

2

Click User Accounts and Family Safety or User Accounts.

3

Click User Accounts.

4

Click Create a password for your account under Make changes to your user account.

5

In the New password and Confirm new password fields, enter the password for your account.

6

Click Create password.

See Windows Help and Support for more information on the Windows password.

To change the Windows password

1

Click Start and Control Panel.

2

Click User Accounts and Family Safety or User Accounts.

3

Click User Accounts.

4

Click Change your password.

5

In the Current password field, enter your current password.

6

In the New password and Confirm new password fields, enter a new password.

7

Click Change password.

n

133

N

Customizing Your VAIO Computer >

Setting the Password

To remove the Windows password

1

Click Start and Control Panel.

2

Click User Accounts and Family Safety or User Accounts.

3

Click User Accounts.

4

Click Remove your password.

5

In the Current password field, enter the current password that you want to remove.

6

Click Remove password.

n

134

N

Customizing Your VAIO Computer >

Using the VAIO Control Center

n

135

N

Using the VAIO Control Center

The VAIO Control Center utility allows you to access system information and to specify preferences for system behavior.

To use the VAIO Control Center

1

Click Start, All Programs, and VAIO Control Center.

2

Select your desired control item and change the settings.

3

Once finished, click OK.

The setting of the desired item is changed.

For more information about each option, see the help file included with the VAIO Control Center.

Some of the control items will not be visible if you open the VAIO Control Center as a standard user.

Customizing Your VAIO Computer >

Using the VAIO Power Management

n

136

N

Using the VAIO Power Management

Power management helps you set up power plans for running on AC or battery power to suit your requirements for power consumption.

The VAIO Power Management function is added to the Windows Power Options. With this software application, you can enhance the Windows power management functions to ensure better operation of your computer and longer battery life.

Selecting a Power Plan

When you start the computer, a power status icon appears on the taskbar. This icon indicates what kind of power source you are currently using. Click this icon to display the window that shows your power status.

To select a power plan

1

Right-click the power status icon on the taskbar and select Power Options.

2

Select your desired power plan.

To change the power plan settings

1

Click Change plan settings on the right of your desired power plan in the Power Options window.

Change the Sleep mode and display settings as needed.

2

If you need to change the advanced settings, click Change advanced power settings and go to step 3.

Otherwise, click Save changes.

3

Click the VAIO Power Management tab.

Change the settings for each item.

4

Click OK.

Customizing Your VAIO Computer >

Selecting Graphics Modes

n

137

N

Selecting Graphics Modes

Connecting the supplied or optional docking station to your computer enables you to use both the graphics accelerators on the docking station and on the computer.

About Graphics Modes with Graphics Accelerators

When connecting the docking station to your computer, you can use two graphics modes. Depending on the number of external displays connected to the computer and the docking station, your computer automatically switches a graphics mode to the optimal graphics mode.

❑ Computer Display mode

In Computer Display mode, your computer enhances its graphic performance by using the graphics accelerator on the docking station when images displayed on the computer screen. This mode is suitable for when you use certain software applications, such as game software, on the computer screen.

!

You cannot view images on the external display(s) connected to the docking station in Computer Display mode.

❑ External Display mode

In External Display mode, you can extend your desktop across the external display(s) connected to the computer and the docking station. This mode is suitable for when you play a video game only on the external display(s) connected to the docking station.

The graphics accelerator on the computer is used to display images on the computer screen or the external display(s) connected to the computer and the graphics accelerator on the docking station is used to display images on the external display(s) connected to the docking station.

Customizing Your VAIO Computer >

Selecting Graphics Modes

n

138

N

Selecting the Graphics Mode Manually

You can manually select your desired graphics mode.

To select the graphics mode manually

1

Press the Fn+F7 keys.

2

Click Settings.

3

Select your desired graphics mode and click OK or Apply.

You can also select your desired display output destination in the Settings window.

If you use the Intel

®

Wireless Display (installed on selected models only), disconnect the docking station from your computer or disconnect the external display(s) from the docking station and select External Display mode.

Customizing Your VAIO Computer >

Changing the Display Language

n

139

N

Changing the Display Language

On models with Windows 7 Ultimate or Windows 7 Enterprise, you can download and install your desired language pack.

See the specifications to find out about configuration of your computer.

!

To download a language pack, your computer must be connected to the Internet. For information on how to connect the computer to the Internet, see

Using the Internet (page 66)

.

To install a language pack

1

Click Start, All Programs, and Windows Update.

2

Click xx (number) optional updates are available.

3

Select the desired language pack from the list.

4

Click OK to start the download and installation of the selected language pack.

To change the display language

1

Click Start, Control Panel, and Clock, Language, and Region.

2

Click Region and Language.

3

Select the Keyboards and Languages tab.

4

Choose a display language from the drop-down list.

5

Click OK.

Precautions >

n

140

N

Precautions

This section describes safety guidelines and precautions to help you protect your VAIO computer from potential damage.

Some features and options in this section may not be available on your computer.

Safety Information

(page 141)

Care and Maintenance Information

(page 143)

Handling Your Computer

(page 144)

Handling the LCD Screen

(page 146)

Using the Power Source

(page 147)

Handling the Built-in Camera

(page 148)

Handling Discs

(page 149)

Using the Battery Pack

(page 150)

Handling "Memory Stick"

(page 151)

Handling the Built-in Storage Device

(page 152)

Using Fingerprint Authentication

(page 153)

Using the TPM

(page 154)

Precautions >

Safety Information

n

141

N

Safety Information

Computer

❑ Use your computer on a solid, stable surface.

❑ It is recommended that you do not use your computer directly on your lap. The temperature of the base of the unit may rise during normal operation and over time could result in discomfort or burns.

❑ Use only specified peripheral equipment and interface cables.

❑ Keep small parts such as "Memory Stick" and "Memory Stick" adaptors out of reach of children. There is a risk of swallowing them.

Power Source

❑ Do not place the AC adapter in contact with your skin. Remove the AC adapter away from your body if it becomes warm and causes discomfort.

❑ Do not place heavy objects on the power cord, or this could cause a fire.

❑ To disconnect the power cord, pull it out by holding the plug. Never pull the cord itself.

❑ Unplug your computer from the AC outlet if you are not planning to use the computer for an extended period of time.

❑ When the AC adapter is not used, unplug it from the AC outlet.

❑ Make sure that an AC outlet is easily accessible.

Precautions >

Safety Information

n

142

N

Battery Pack

❑ Do not leave battery packs in temperatures above 60°C, such as in a car parked in the sun or under direct sunlight.

❑ For your safety, it is highly recommended that you use genuine Sony rechargeable battery packs and AC adapters that meet the quality assurance standard, supplied by Sony for your VAIO computer. Some VAIO computers may only function with a genuine Sony battery pack.

❑ Keep the battery pack away from all sources of heat.

❑ Keep the battery pack dry.

❑ Do not open or try to disassemble the battery pack.

❑ Do not expose the battery pack to any mechanical shock, such as caused by dropping it on a hard surface.

❑ If you are not using your computer for an extended period of time, remove the battery pack from the computer to prevent damage to the battery pack.

❑ If you have not used the battery pack for a considerable amount of time, the remaining battery life may become short.

This is normal and does not indicate a malfunction. The battery pack will gradually discharge over time even while not in use. Connect the AC adapter to your computer and recharge the battery pack before using the computer again.

Headphones

Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music while walking, especially at pedestrian crossings.

Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume or discontinue use.

Precautions >

Care and Maintenance Information

n

143

N

Care and Maintenance Information

Computer

❑ Clean the cabinet with a soft, dry or lightly moistened cloth with a mild detergent solution. Do not use an abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these may damage the finish of your computer.

❑ Make sure you unplug the AC adapter and remove the battery pack before cleaning your computer.

LCD Screen

❑ Use a soft, dry cloth to wipe the surface of the LCD screen. Rubbing the surface could damage the screen.

❑ To protect the LCD screen and keyboard from damage, for example in the case of carrying the computer, spread out the cleaning cloth with no wrinkles on the keyboard before closing the LCD screen lid.

Built-in Camera

Clean the area on and around the built-in camera with a soft, dry cloth. Do not rub the area too hard, as it can be easily scratched.

Discs

❑ Proper care of the disc is essential to its continuous reliability. Do not use solvents (such as benzine, thinner, alcohol, commercially available cleaners, or anti-static spray) which may cause damage to the disc.

❑ For normal cleaning, hold the disc by its edges and use a soft cloth to wipe the surface from the center out.

❑ If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface of the disc from the center out. Wipe off any remaining moisture with a dry soft cloth.

Precautions >

Handling Your Computer

n

144

N

Handling Your Computer

❑ If you drop a solid object or any liquid onto your computer, shut down the computer, unplug it, and remove the battery pack. You may want to have the computer checked by qualified personnel before operating it again.

❑ Do not drop your computer or place any objects on top of the computer.

❑ Do not place your computer in a location subject to:

❑ Heat sources, such as radiators or air ducts

❑ Direct sunlight

❑ Excessive dust

❑ Moisture or rain

❑ Mechanical vibration or shock

❑ Strong magnets or speakers that are not magnetically shielded

❑ Ambient temperature of more than 35°C or less than 5°C

❑ High humidity

❑ Do not place electronic equipment near your computer. The electromagnetic field of the equipment may cause the computer to malfunction.

❑ Do not use your computer without installing the battery pack as it may cause the computer to malfunction.

❑ Your computer uses high-frequency radio signals and may cause interference to radio or TV reception. If this occurs, move the computer a suitable distance away from the radio or TV.

❑ Do not use cut or damaged connection cables.

Precautions >

Handling Your Computer

n

145

❑ If your computer is brought directly from a cold location to a warm one, moisture may condense inside the computer. In such a case, allow at least one hour before turning on the computer. If any problems occur, unplug the computer and contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your

VAIO Computer

(page 5)

.

❑ To avoid losing data when your computer is damaged, back up your data regularly.

❑ Do not exert pressure on the LCD screen or its edges when opening the LCD screen lid or lifting your computer. The LCD screen may be sensitive to pressure or added stress, and exerting pressure may damage the screen or cause it to malfunction. To open the computer, hold the base with one hand and gently lift the LCD screen lid with the other. To carry the computer with the lid open, be sure to hold the computer with both hands.

N

❑ Use a carrying case specially designed to carry your computer.

Precautions >

Handling the LCD Screen

n

146

N

Handling the LCD Screen

❑ Do not leave the LCD screen facing the sun. This could damage the LCD screen. Be sure to block direct sunlight when using your computer near a window.

❑ Do not scratch the surface of the LCD screen or exert pressure on it. This could cause a damage.

❑ Using your computer in low temperature conditions may produce a residual image on the LCD screen. This does not indicate a malfunction. When the computer returns to normal temperature, the screen returns to normal.

❑ A residual image may appear on the LCD screen if the same image is displayed for an extended period of time. The residual image disappears after a while. You can use a screen saver to prevent residual images.

❑ The LCD screen becomes warm during operation. This is normal and does not indicate a malfunction.

❑ The LCD screen is manufactured using high-precision technology. You may, however, see tiny black points and/or bright points (red, blue, or green) that continuously appear on the LCD screen. This is a normal result of the manufacturing process and does not indicate a malfunction.

❑ Do not change the LCD screen orientation setting in the Tablet PC Settings window even when there are change options available for selection, as this may make your computer unstable. Sony assumes no liability for any malfunctions arising from changes to the settings.

❑ Do not exert pressure on the LCD screen lid with the lid closed as it may scratch the LCD screen or soil it.

❑ Closing the LCD screen lid with a LAN cable, a display cable, or a security cable connected to your computer may cause damage to the corresponding port on the computer. Be sure to disconnect each cable from the computer before closing the lid.

Precautions >

Using the Power Source

n

147

N

Using the Power Source

❑ Do not share an AC outlet with other power-consuming equipment, such as a photocopier or a shredder.

❑ You can purchase a power strip with a surge protector. This device helps prevent damage to your computer caused by sudden power surges, in an electrical storm, for example.

❑ Use the AC adapter supplied with your computer or genuine Sony products. Do not use any other AC adapter as it may cause a malfunction.

Precautions >

Handling the Built-in Camera

n

148

N

Handling the Built-in Camera

❑ Do not scratch or soil the area on and around the built-in camera, as it may cause poor quality images.

❑ Do not let the direct sunlight get into the lens of the built-in camera regardless of your computer's power state, as it may cause the camera to malfunction.

Precautions >

Handling Discs

n

149

N

Handling Discs

❑ Fingerprints and dust on the surface of a disc may cause read errors. Be sure to hold the disc by its edges and central hole, as shown below:

❑ Never affix an adhesive label to a disc. This will affect the use of the disc and may result in irreparable damage.

Precautions >

Using the Battery Pack

n

150

N

Using the Battery Pack

❑ Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low temperatures.

❑ Charge battery packs at temperatures between 10°C to 30°C. Lower temperatures require longer charging time.

❑ Do not charge the battery pack in any way other than as described in this user guide or as designated by Sony in writing.

❑ While the battery pack is in use or being charged, heat builds up in the battery pack. This is normal and is not cause for concern.

❑ You do not need to discharge the battery pack before recharging.

❑ If the battery pack quickly runs out of power after being fully charged, it may be reaching the end of its life and should be replaced.

Precautions >

Handling "Memory Stick"

n

151

N

Handling "Memory Stick"

❑ Do not touch the "Memory Stick" connector with your finger or metallic objects.

❑ Use only the adhesive label supplied with "Memory Stick".

❑ Do not bend, drop, or expose "Memory Stick".

❑ Do not disassemble or modify "Memory Stick".

❑ Keep "Memory Stick" dry.

❑ Do not use or store "Memory Stick" in a location subject to:

❑ Static electricity

❑ Electrical noise

❑ Extremely high temperatures, such as in a car parked in the sun

❑ Direct sunlight

❑ High humidity

❑ Corrosive substances

❑ Use the storage case supplied with "Memory Stick".

❑ Be sure to make a backup copy of your valuable data.

❑ When using "Memory Stick Duo", do not use a fine-tipped pen to write on the label adhered to "Memory Stick Duo".

Exerting pressure on the media may damage internal components.

Precautions >

Handling the Built-in Storage Device

n

152

N

Handling the Built-in Storage Device

The built-in storage device (hard disk drive or solid state drive) has a high storage density and reads or writes data in a short time. However, it can be easily damaged if improperly used. If the built-in storage device is damaged, the data cannot be restored. To prevent losing data, you should be careful when handling your computer.

To avoid damaging your built-in storage device

❑ Do not subject your computer to sudden movements.

❑ Keep your computer away from magnets.

❑ Do not place your computer in a location subject to mechanical vibration or in an unstable position.

❑ Do not turn off the power or restart your computer while reading or writing data to the storage device.

❑ Do not use your computer in a place subject to extreme changes in temperature.

❑ Do not remove the storage device from your computer.

Precautions >

Using Fingerprint Authentication

n

153

N

Using Fingerprint Authentication

❑ The fingerprint authentication technology does not ensure complete user authentication or complete protection of your data and hardware.

Sony assumes no liability for any problems and damages arising out of your use of or inability to use the fingerprint sensor.

❑ The fingerprint recognition rate depends on your operating conditions and varies among individuals as well.

❑ In case the built-in storage device has to be initialized, for example after the repair work, the fingerprint templates will be lost. You will have to register them all over again.

❑ The maintenance and management of data concerning fingerprint authentication must be carried out at your own risk.

Sony assumes no liability for any defects arising out of your data maintenance and management.

❑ A fingerprint sensor may malfunction or be damaged if you scratch its surface with:

❑ a solid or sharp-pointed object

❑ fine objects, for example swiping a finger covered with dirt across the fingerprint sensor

❑ Discharge static electricity from your finger by touching a metallic object especially during dry seasons (e.g. winter) before scanning your fingerprint. Static electricity may cause the fingerprint sensor to malfunction.

Precautions >

Using the TPM

n

154

N

Using the TPM

❑ Although your computer is provided with the TPM security functions, these functions do not ensure complete protection of your data and hardware. Sony assumes no liability for any problems and damages arising out of your use of the functions.

❑ After you have installed the Infineon TPM Professional Package, you need to set a few TPM passwords on your computer. Without these passwords, you will not be able to restore any TPM-protected data. Be sure to write down the passwords and keep them safe and private from other people.

❑ Be sure to make backup copies of the latest emergency recovery archive file, emergency recovery token file, password reset token file, and personal secret file and keep them safe and private from other people before sending your computer for repair. The data stored in the TPM that is embedded on the motherboard may be lost or corrupted during the course of repair.

❑ During the course of repair, the TPM will also be replaced if the motherboard needs replacement. In such a case, use the backup copies of the emergency recovery archive file, emergency recovery token file, password reset token file, and personal secret file to restore the TPM configuration.

❑ Be sure to make a backup copy of the data stored on the built-in storage device before sending your computer for repair.

The built-in storage device may be initialized and returned after the repair work and, in such a case, you will not be able to restore the data on the device using the backup copies of the emergency recovery archive file, emergency recovery token file, password reset token file, and personal secret file.

❑ Make sure you set up the automatic backup operations after completing the TPM initialization wizard. If the window containing the Run automatic backup now check box is displayed after the setup, select the check box and update the backup files. The restore process using the backup files may fail if you do not set up the automatic backup operations.

❑ The maintenance and management of TPM-protected data must be carried out at your own risk. Sony assumes no liability for any defects arising out of your data maintenance and management.

Troubleshooting >

n

155

N

Troubleshooting

This section describes how to solve common problems you might encounter when using your VAIO computer. Many problems have simple solutions. If these suggestions fail to solve your problems, use the VAIO Care. To launch the software, see

Using the VAIO Care (page 35)

.

If the problems still cannot be solved and you need assistance, visit the support web sites listed in Finding More about Your

VAIO Computer (page 5)

.

Some features and options in this section may not be available on your computer.

Computer Operations

(page 157)

System Update / Security

(page 164)

Recovery / Recovery Media

(page 165)

Partition

(page 169)

Battery Pack

(page 170)

Built-in Camera

(page 172)

Networking (LAN/Wireless LAN)

(page 174)

Wireless WAN

(page 178)

BLUETOOTH Technology

(page 179)

Optical Discs

(page 182)

Display

(page 187)

Printing

(page 193)

Microphone

(page 194)

Troubleshooting >

Speakers

(page 195)

Touch Pad

(page 197)

Keyboard

(page 198)

Floppy Disks

(page 199)

Audio/Video

(page 200)

"Memory Stick"

(page 202)

Peripherals

(page 203)

Docking Station

(page 204)

n

156

N

Troubleshooting >

Computer Operations

n

157

N

Computer Operations

What should I do if my computer does not start?

❑ Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.

❑ Make sure the battery pack is installed properly and charged. If an extended battery pack is attached to the computer, make sure both the primary battery pack and the extended battery pack are installed properly and charged.

❑ Disconnect all connected USB devices (if any), and then restart your computer.

❑ If your computer is plugged into a power strip or an uninterruptible power supply (UPS), make sure the power strip or UPS is plugged into a power source and turned on.

❑ If you are using an external display, make sure it is plugged into a power source and turned on. Make sure the brightness and contrast controls are adjusted correctly. See the manual that came with your display for more information.

❑ Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC adapter, and then press the power button to turn on your computer.

❑ Condensation may cause your computer to malfunction. If this occurs, do not use the computer for at least one hour.

❑ Check that you are using the supplied Sony AC adapter. For your safety, use only the genuine Sony rechargeable battery pack and AC adapter, which are supplied by Sony for your VAIO computer.

Troubleshooting >

Computer Operations

n

158

N

What should I do if the green power indicator light turns on but my screen remains blank?

❑ Press the Alt+F4 keys several times to close the application window. An application error may have occurred.

❑ If the Alt+F4 keys do not work, click Start, the arrow next to the Shut down button, and Restart to restart your computer.

❑ If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart.

If the Windows Security window appears, click Restart.

❑ If this procedure does not work, press and hold the power button for more than four seconds to shut down your computer.

Unplug the AC adapter and leave the computer for about five minutes. Then plug the AC adapter and turn on the computer again.

!

Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.

Troubleshooting >

Computer Operations

n

159

N

What should I do if my computer or software stops responding?

❑ If your computer stops responding while a software application is running, press the Alt+F4 keys to close the application window.

❑ If the Alt+F4 keys do not work, click Start and the Shut down button to turn off your computer.

❑ If your computer does not turn off, press the Ctrl+Alt+Delete keys and click the Shut down button.

If the Windows Security window appears, click Shut Down.

❑ If this procedure does not work, press and hold the power button until the computer turns off.

!

Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.

❑ Unplug the AC adapter and remove the battery pack. Wait three to five minutes. Reinstall the battery pack, plug the AC adapter, and then press the power button to turn on your computer.

❑ Try reinstalling the software.

❑ Contact the software publisher or designated provider for technical support.

Troubleshooting >

Computer Operations

n

160

N

Why doesn't my computer enter Sleep or Hibernate mode?

Your computer may become unstable if the operating mode is changed before the computer completely enters Sleep or

Hibernate mode.

To restore your computer to Normal mode

1

Close all open programs.

2

Click Start, the arrow next to the Shut down button, and Restart.

3

If your computer does not restart, press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and

Restart.

If the Windows Security window appears, click Restart.

4

If this procedure does not work, press and hold the power button until the computer turns off.

!

Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.

What should I do if the charge indicator light is blinking fast and my computer does not start?

❑ This problem could be due to the battery pack not being installed properly. To solve this problem, turn off your computer and push and hold the battery off button for about three seconds with a thin, straight object (such as a paper clip). If this does not solve the problem, remove the battery pack and install it once again. For details, see Installing/Removing the

Battery Pack (page 21)

.

❑ If the problem persists, it means the installed battery pack is not compatible. Remove the battery pack and contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO

Computer

(page 5)

.

Troubleshooting >

Computer Operations

n

161

N

Why does the System Properties window display a slower CPU speed than the maximum?

This is normal. Because your computer's CPU utilizes a type of CPU speed controlling technology for power conservation purposes, System Properties may display the current CPU speed instead of the maximum speed.

What should I do if my computer does not accept my password and returns a message,

Enter Onetime Password?

If you enter a wrong power-on password three times consecutively, the Enter Onetime Password message appears and

Windows will not start. Press and hold the power button for more than four seconds to check that the power indicator light turns off. Wait for 10 to 15 seconds, then restart your computer and enter the correct password. The password is case sensitive, so be sure to check letters for the current case before you enter the password.

What should I do if my game software does not work or it keeps crashing?

❑ Check the web site of the game if there are any patches or updates to download.

❑ Make sure you have installed the latest video driver software.

❑ On some VAIO models, the graphics memory is shared with the system. The optimal graphic performance in such a case is not guaranteed.

❑ If the docking station is connected to your computer, do any of the following:

❑ Select Computer Display mode as the graphics mode to display images on the computer screen

(page 137) .

❑ Select External Display mode and change the settings for the display output destination to display images only on the external display(s) connected to the docking station

(page 137) .

Troubleshooting >

Computer Operations

n

162

N

Why doesn't my screen turn off after the automatic turn-off time has passed?

Some software applications or screen savers are designed to temporarily disable the feature of your operating system that turns off the computer screen or places the computer into Sleep mode after a certain period of inactivity. To solve this problem, exit the running software application(s) or change the current screen saver.

How can I change the boot device order?

You can use one of the BIOS functions to change the boot device order. Follow these steps:

1

Turn on the computer and press the F2 key repeatedly until the VAIO logo disappears.

The BIOS setup screen appears. If the screen does not appear, restart the computer and try again.

!

The VAIO logo does not appear when Fast BIOS Startup Settings on the VAIO Control Center is enabled. Disable the settings with the VAIO Control

Center (page 163)

.

2

Press the < or , key to select Boot.

3

Press the M or m key to select the drive whose boot device order you want to change.

4

Press the F5 or F6 key to change the boot device order.

5

Press the < or , key to select Exit, select Exit Setup, and then press the Enter key.

At the confirmation prompt, press the Enter key.

What should I do if I cannot boot my computer from the USB floppy disk drive connected to the computer?

To boot your computer from the USB floppy disk drive, you need to change the boot device.

1

Make sure Fast BIOS Startup Settings on the VAIO Control Center is disabled (page 163) .

2

Restart your computer and press the F11 key repeatedly until the VAIO logo disappears.

Troubleshooting >

Computer Operations

n

163

N

Why doesn't the VAIO logo appear when I turn on my computer?

When Fast BIOS Startup Settings on the VAIO Control Center is enabled, the VAIO logo does not appear. To disable Fast

BIOS Startup Settings, follow these steps:

1

Click Start, All Programs, and VAIO Control Center.

2

Click System Information and Fast BIOS Startup Settings to disable the settings.

Troubleshooting >

System Update / Security

n

164

N

System Update / Security

How can I find important updates for my computer?

You can find and install the latest updates on your computer with the software applications: the Windows Update and the

VAIO Update. See Updating Your Computer

(page 33)

for more information.

How do I schedule the installation of Windows updates to my computer?

The Microsoft Windows operating system is preinstalled on your computer. The best way to protect your computer against security threats, such as viruses, is to download and install the latest Windows updates regularly.

You can get important Windows updates by doing the following:

!

Your computer must be connected to the Internet to download the updates.

1

Click Start and Control Panel.

2

Click System and Security.

3

Click Action Center.

4

Follow the on-screen instructions to set up automatic or scheduled updates.

Troubleshooting >

Recovery / Recovery Media

n

165

N

Recovery / Recovery Media

How can I create Recovery Media?

You can create Recovery Media using the VAIO Care. The media are used to restore your computer system to its factory

default settings. To create the media, launch the VAIO Care (page 35)

and then click Recovery & restore, Recovery, and

Create Recovery Media.

!

If a docking station is not supplied with your computer, you need to connect an external optical disc drive (not supplied).

See the Recovery, Backup and Troubleshooting Guide for more information.

How can I restore my computer system to its factory default settings?

There are two ways to recover your computer system: from Recovery Media and from the recovery area. See the Recovery,

Backup and Troubleshooting Guide for more information.

How can I reinstall the original software and drivers?

You can restore the preinstalled software and drivers using the VAIO Care. To restore them, launch the VAIO Care

(page

35)

and then click Recovery & restore, Recovery, and Reinstall Applications and Drivers.

See the help file included with the VAIO Care for more information.

Troubleshooting >

Recovery / Recovery Media

n

166

N

How do I check the volume of the recovery area?

Your built-in storage device contains the recovery area where the data for the system recovery is stored. To check the volume of the recovery area, follow these steps:

1

Click Start, right-click Computer, and select Manage.

2

Click Disk Management under Storage in the left pane.

The volume of the recovery area and the total volume of the C drive are displayed in the Disk 0 row in the center pane.

Troubleshooting >

Recovery / Recovery Media

n

167

N

How do I reduce the volume of the recovery area?

Your built-in storage device contains the recovery area where the data for system recovery is stored. If your computer includes a solid state drive, you might want to minimize the recovery area by removing such data.

1

If you recover your computer from Recovery Media (optical discs) on the model without a docking station, connect an external optical disc drive (not supplied) to the computer and to an AC power source.

2

Insert the disc into the optical disc drive or connect the USB flash drive (not supplied) to the USB port while the computer is in Normal mode.

!

Use Recovery Media you created upon delivery of your computer.

3

Turn off the computer and turn it on once again.

If you are using the docking station, the external optical disc drive, or the USB flash drive, press the F11 key repeatedly until the VAIO logo disappears.

However, when Fast BIOS Startup Settings on the VAIO Control Center is enabled, the VAIO logo does not appear. Disable the settings with the VAIO

Control Center (page 163)

.

4

Press the M or m key to select VAIO Care Rescue and press the Enter key.

5

Click Tools and Start advanced recovery wizard.

When the Do you need to rescue data? message appears, make a backup copy of your data, if needed.

Troubleshooting >

Recovery / Recovery Media

n

6

Follow the on-screen instructions until the Select recovery type window appears.

7

Select Custom recovery - Remove recovery contents.

8

Follow the on-screen instructions.

!

The above procedure involves system recovery. The applications and data you added on the storage device before removing the data for system recovery will all be lost.

Once you have removed the data for system recovery, you need the Recovery Media for later system recovery.

168

N

Troubleshooting >

Partition

n

169

N

Partition

How can I create a hard disk partition?

The Windows feature allows you to create a partition without recovering your computer system.

1

Click Start, Control Panel, System and Security, and Create and format hard disk partitions under Administrative

Tools.

2

If the User Account Control window appears, click Yes.

If you are currently logged onto your computer as a standard user, you may be prompted to enter an administrator name and password.

3

Right-click the C drive and select Shrink Volume.

4

Enter the size of the partition to be created in Enter the amount of space to shrink in MB and click Shrink.

5

Right-click Unallocated and select New Simple Volume.

6

Follow the on-screen instructions.

If you use the VAIO Care Rescue, you can create a partition in the recovery process. See Using the VAIO Care

(page 35)

for more information.

Troubleshooting >

Battery Pack

n

170

N

Battery Pack

How do I find the battery charging status?

You can check the charge indicator for the battery charging status. See Charging the Battery Pack

(page 25)

for more

information.

When is my computer using AC power?

When your computer is connected to an AC outlet with the AC adapter, it uses AC power, even if the battery pack is installed.

When should I recharge the battery pack?

Recharge the battery pack when:

❑ The battery pack is running out of power and both the charge and power indicator lights blink.

❑ You have not used the battery pack for an extended period of time.

When should I replace the battery pack?

A message prompting you to replace the battery pack appears when the battery pack reaches the end of its life. You can check the battery charge capacity with the Battery function on the VAIO Control Center.

Should I be concerned that the installed battery pack is warm?

No, it is normal for the battery pack to be warm while it is powering your computer.

Troubleshooting >

Battery Pack

n

171

N

Can my computer enter Hibernate mode while running on battery power?

Your computer can enter Hibernate mode while running on battery power, but some software programs and peripheral devices prevent the system from entering Hibernate mode. If you are using a program that prevents the system from entering

Hibernate mode, save your data frequently to avoid losing data. See Using Hibernate Mode

(page 32)

for information on

how you can manually activate Hibernate mode.

Why can't I fully charge my battery pack?

The battery care function is enabled to extend the life of your battery pack on the VAIO Control Center. Check the settings on the VAIO Control Center.

What should I do if a message appears notifying of either incompatibility or the improper installation of the battery pack and my computer then enters Hibernate mode?

❑ This problem could be due to the battery pack not being installed properly. To solve this problem, turn off your computer and push and hold the battery off button for about three seconds with a thin, straight object (such as a paper clip). If this does not solve the problem, remove the battery pack and install it once again.

If an extended battery pack is attached to the computer, turn off the computer and remove the extended battery pack. If this does not solve the problem, push and hold the battery off button for about three seconds. If the problem persists, remove both battery packs and install them once again. For information on how to install and remove the battery pack, see Installing/Removing the Battery Pack

(page 21)

.

❑ If the problem persists, it means the installed battery pack is not compatible. Remove the battery pack and contact an authorized Sony service/support center. To find the nearest center or agent, see Finding More about Your VAIO

Computer

(page 5)

.

Troubleshooting >

Built-in Camera

n

172

N

Built-in Camera

Why does the viewfinder show no images or poor-quality images?

❑ The built-in camera cannot be shared by more than one software application. Exit the current application before launching another. On models with Media Gallery, you cannot use another camera application that uses the built-in camera while using the gesture function of Media Gallery.

❑ The viewfinder may show some noise, for example horizontal streaks, when you are viewing a rapid-moving object. This is normal and does not indicate a malfunction.

❑ If the problem persists, restart your computer.

Why is the video input from the built-in camera suspended for a few seconds?

The video input may be suspended for a few seconds if:

❑ a shortcut key with the Fn key is used.

❑ the CPU load increases.

This is normal and does not indicate a malfunction.

Why are captured images poor in quality?

❑ The images captured under the fluorescent light may show reflections of light.

❑ A dark portion in captured images may appear as a noise.

❑ The area on and around the built-in camera is dirty. Clean the area. See Care and Maintenance Information

(page 143)

.

Troubleshooting >

Built-in Camera

n

173

N

What should I do if captured images contain dropped frames and audio interruptions?

❑ The effect settings on your software application may cause dropped frames. See the help file included with your software application for more information.

❑ There may be more software applications running than your computer can handle. Exit the applications that you are not currently using.

❑ This problem may occur while your computer is running on the power saving plan, which reduces the CPU performance.

See Selecting a Power Plan

(page 136)

to check the current power plan.

What should I do if movie playback shows dropped frames while my computer is running on battery power?

The battery pack is running out of power. Connect your computer to an AC outlet.

What should I do if captured images flicker?

This problem occurs when you use the camera under fluorescent lights due to a mismatch between the lighting output frequency and the shutter speed.

To reduce flicker noise, change the direction of the camera or the brightness of camera images. In some software applications, you can set an appropriate value to one of the camera properties (e.g. light source, flicker, etc.) to eliminate flicker noise.

Troubleshooting >

Networking (LAN/Wireless LAN)

n

174

N

Networking (LAN/Wireless LAN)

What should I do if the VAIO Smart Network icon is not displayed on the taskbar?

❑ Click

on the taskbar and check if the VAIO Smart Network icon is displayed.

❑ If the VAIO Smart Network icon

is not on the taskbar, click Start, All Programs, and VAIO Smart Network, and then change the setting to display the icon on the taskbar.

Troubleshooting >

Networking (LAN/Wireless LAN)

n

175

N

What should I do if my computer cannot connect to a wireless LAN access point?

❑ Connection capability is affected by distance and obstructions. You may need to move your computer away from obstructions or closer to any access point you may be using.

❑ Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.

❑ Make sure power to the access point is on.

❑ If you want to connect your computer to a wireless LAN access point using the 5 GHz band, make sure the option to use the 5 GHz band or both the 2.4 GHz and 5 GHz bands is selected for Wireless LAN Settings in the VAIO Smart Network settings window. Wireless LAN communication (IEEE 802.11a standard) using only the 5 GHz band, available on selected models only, is disabled by default.

❑ Follow these steps to check the settings:

1

Click Start and Control Panel.

2

Click View network status and tasks under Network and Internet.

3

Click Connect to a network to confirm that your access point is selected.

❑ Make sure the encryption key is correct.

❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. To change the settings, follow these steps:

1

Click Start and Control Panel.

2

Click System and Security and Power Options.

3

Click Change plan settings for the current power plan.

4

Click Change advanced power settings.

5

Double-click Wireless Adapter Settings and Power Saving Mode.

6

Select Maximum Performance from the drop-down list.

Troubleshooting >

Networking (LAN/Wireless LAN)

n

176

N

What should I do if I cannot access the Internet?

❑ Check the access point settings. See the manual that came with your access point for more information.

❑ Make sure your computer and the access point are connected to one another.

❑ Move your computer away from obstacles or closer to any access point you may be using.

❑ Make sure your computer is properly configured for Internet access.

❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot

connect to a wireless LAN access point?

(page 175)

to change the settings.

Why is the data transfer speed slow?

❑ The wireless LAN data transfer speed is affected by distance and obstructions between devices and access points. Other factors include device configurations, radio conditions, and software compatibility. To maximize the data transfer speed, move your computer away from obstacles or closer to any access point you may be using.

❑ If you are using a wireless LAN access point, the device may be temporarily overloaded depending on how many other devices are communicating via the access point.

❑ If your access point interferes with other access points, change the access point channel. See the manual that came with your access point for more information.

❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot

connect to a wireless LAN access point?

(page 175)

to change the settings.

Troubleshooting >

Networking (LAN/Wireless LAN)

n

177

N

How do I avoid data transfer interruptions?

❑ While your computer is connected to an access point, data transfer interruptions may occur if a large file is exchanged or the computer is placed in close proximity to microwaves and cordless telephones.

❑ Move your computer closer to the access point.

❑ Make sure the access point connection is intact.

❑ Change the access point channel. See the manual that came with your access point for more information.

❑ Make sure Maximum Performance is selected for Wireless Adapter Settings in the Power Options window. Selecting any other option may result in a communication failure. Follow the steps in What should I do if my computer cannot

connect to a wireless LAN access point?

(page 175)

to change the settings.

What are channels?

❑ Wireless LAN communication uses divided frequency bands known as channels. Third-party wireless LAN access point channels may be preset to different channels from Sony devices.

❑ If you are using a wireless LAN access point, see connectivity information contained in the manual that came with your access point.

Why does the network connection stop when I change the encryption key?

Two computers with the wireless LAN function may lose a peer-to-peer network connection if the encryption key is changed.

You can either change the encryption key back to the original profile or re-enter the key on both computers so the key matches.

Troubleshooting >

Wireless WAN

n

178

N

Wireless WAN

What should I do if my computer cannot connect to the wireless WAN?

❑ Make sure the battery pack is installed properly and charged.

❑ Make sure the SIM card is 3G data enabled and activated by your telecom operator. When inserting the SIM card, be sure to follow the procedure in Inserting a SIM Card

(page 74)

.

❑ Your mobile phone network needs to cover your area. Contact your network provider for information on the network coverage.

❑ Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.

❑ Make sure the switch next to Wireless WAN is set to On in the VAIO Smart Network window.

❑ Make sure that the Access Point Name (APN) is properly configured in your connection manager software. If not, contact your telecom operator to get the correct APN to use. See the help file included with the connection manager software for more information about the APN configuration.

❑ Check that your connection manager software has detected the wireless WAN modem successfully. It may take some time for the software to detect the wireless WAN modem.

For further information on the wireless WAN function, visit the VAIO support web site.

❑ Make sure the SIM card holder is properly inserted into the SIM card slot.

Troubleshooting >

BLUETOOTH Technology

n

179

N

BLUETOOTH Technology

What should I do if other BLUETOOTH devices cannot find my computer?

❑ Make sure both devices have the BLUETOOTH function enabled.

❑ Make sure the WIRELESS switch is on and the WIRELESS indicator light is lit on your computer.

❑ You cannot use the BLUETOOTH function while your computer is in a power saving mode. Bring the computer back to

Normal mode, then turn on the WIRELESS switch.

❑ Your computer and the device may be too far apart. Wireless BLUETOOTH technology works best when the devices are within 10 meters of each other.

What should I do if I cannot find the BLUETOOTH device I want to communicate with?

❑ Check that the BLUETOOTH function of the device you want to communicate with is on. See the other device's manual for more information.

❑ If the device you want to communicate with is already communicating with another BLUETOOTH device, it may not be found or it may not be able to communicate with your computer.

❑ To allow other BLUETOOTH devices to communicate with your computer, follow these steps:

1

Click Start and Devices and Printers.

2

Right-click the BLUETOOTH device icon and click Bluetooth settings.

3

Click the Options tab and select the Allow Bluetooth devices to find this computer check box.

Troubleshooting >

BLUETOOTH Technology

n

180

N

What should I do if other BLUETOOTH devices cannot connect to my computer?

❑ Check the suggestions in What should I do if I cannot find the BLUETOOTH device I want to communicate with?

(page 179)

.

❑ Make sure the other devices are authenticated.

❑ The data transfer distance can be shorter than 10 meters depending on existing obstacles between the two devices, on radio wave quality, and on the operating system or the software in use. Move your computer and BLUETOOTH devices closer to each other.

Why is my BLUETOOTH connection slow?

❑ The data transfer speed depends on the obstructions and/or the distance between the two devices, on the radio wave quality, and on the operating system or the software in use. Move your computer and BLUETOOTH devices closer to each other.

❑ The 2.4 GHz band, with which BLUETOOTH devices or wireless LAN devices work, is used by various devices. Although

BLUETOOTH devices use the technology to minimize radio interference from other devices that use the same band, such radio interference may cause slower communication speeds and shorter distances or communication failures.

❑ If a version of a BLUETOOTH standard employed on the BLUETOOTH device with which you want to communicate is not the same version as the one employed on your computer, the communication speed becomes slower.

❑ High-speed communications between your computer and BLUETOOTH devices are available when they are compliant with BLUETOOTH Core Specification Version 3.0 + HS. For the high-speed communications, enable both the wireless

LAN and BLUETOOTH functions on the computer.

!

Some BLUETOOTH profiles do not support high-speed communications.

Troubleshooting >

BLUETOOTH Technology

n

181

N

Can I use a device with BLUETOOTH technology on airplanes?

With BLUETOOTH technology, your computer transmits a radio frequency of 2.4 GHz. Sensitive locations, such as hospitals and airplanes, may have restrictions on use of BLUETOOTH devices to avoid radio interference. Check with facility staff to see if use of the BLUETOOTH function on the computer is permitted.

Why can't I use the BLUETOOTH function when I log onto my computer as a user with a standard user account?

The BLUETOOTH function may not be available to a user with a standard user account on your computer. Log onto the computer as a user with administrative rights.

Why can't I use the BLUETOOTH devices when I switch users?

If you switch users without logging off your system, the BLUETOOTH devices will not work. Be sure to log off before switching users. To log off your system, click Start, the arrow next to the Shut down button, and Log off.

Why can't I exchange business card data with a mobile phone?

The business card exchange function is not supported.

What should I do if the BLUETOOTH icon is not displayed on the taskbar?

❑ Make sure that the switch next to BLUETOOTH is set to On in the VAIO Smart Network window.

❑ To display the BLUETOOTH icon on the taskbar, follow these steps:

1

Click Start and Devices and Printers.

2

Right-click the BLUETOOTH device icon and click Bluetooth settings.

3

Click the Options tab and select the Show the Bluetooth icon in the notification area check box.

Troubleshooting >

Optical Discs

n

182

N

Optical Discs

Why does my computer freeze when I try to read a disc?

The disc that your computer is trying to read may be dirty or damaged. Follow these steps:

1

Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.

!

Turning off your computer with the Ctrl+Alt+Delete keys may cause loss of unsaved data.

2

Remove the disc from the optical disc drive.

3

Check the disc for dirt or damage. If you need to clean the disc, see Discs

(page 143)

for instructions.

What should I do if the disc does not slide out?

❑ Make sure the docking station is connected to an AC power source.

❑ Press the disc eject button on the docking station.

❑ If the disc eject button does not work, click Start and Computer, right-click the optical disc drive icon, and select Eject.

❑ Try restarting your computer.

Troubleshooting >

Optical Discs

n

183

N

What should I do if I cannot play a disc properly on my computer?

❑ Make sure the disc is inserted into the optical disc drive correctly. See Using the Optical Disc Drive

(page 47)

.

❑ Make sure the necessary program(s) is installed according to the manufacturer's instructions.

❑ If a disc is dirty or damaged, your computer will stop responding. Follow these steps:

1

Press the Ctrl+Alt+Delete keys and click the arrow next to the Shut down button and Restart to restart the computer.

!

Turning off your computer with the Ctrl+Alt+Delete keys may cause loss of unsaved data.

2

Remove the disc from the optical disc drive.

3

Check the disc for dirt or damage. If you need to clean the disc, see Discs

(page 143)

for instructions.

❑ If you are playing a disc and cannot hear sound, do any of the following:

❑ The volume may have been turned off by the Fn+F2 keys. Press them once again.

❑ The volume may have been minimized by the Fn+F3 keys. Keep pressing the Fn+F4 keys to turn up the volume loud enough to hear sound.

❑ Right-click the volume icon on the taskbar and click Open Volume Mixer to check the settings.

❑ Check the volume setting in the audio mixer.

❑ If you are using external speakers, check the volume settings on the speakers and the connections between the speakers and your computer.

Troubleshooting >

Optical Discs

n

184

❑ Make sure the correct driver software is installed. Follow these steps:

1

Click Start and Control Panel.

2

Click System and Security.

3

Click System.

4

Click Device Manager in the left pane.

The Device Manager window appears with a listing of your computer's hardware devices.

If an "X" or an exclamation point appears on the listed device, you may need to enable the device or reinstall the driver software.

5

Double-click the optical disc drive device to open a list of the optical disc drives of your computer.

6

Double-click your desired drive.

You can confirm the driver software by selecting the Driver tab, and clicking Driver Details.

7

Click OK to close the window.

❑ Make sure an adhesive label is not affixed to a disc. Adhesive labels can come off while the disc is in the optical disc drive and damage the drive or cause it to malfunction.

❑ If a region code warning appears, the disc may be incompatible with the optical disc drive. Check the package to make sure the region code is compatible with the optical disc drive.

❑ If you notice condensation on your computer, do not use the computer for at least one hour. Condensation can cause the computer to malfunction.

❑ Make sure the docking station is securely connected to your computer and is running on AC power, and then try the disc again.

N

Troubleshooting >

Optical Discs

n

185

N

What should I do if I cannot play Blu-ray Disc media or my computer becomes unstable during Blu-ray Disc playback?

❑ Check if your optical disc drive supports the Blu-ray Disc media.

❑ To play copyright protected Blu-ray Disc media continually, you need to update the AACS key. If a message prompts you to update the AACS key, follow the message.

!

Your computer must be connected to the Internet to update the AACS key.

❑ You may not be able to play some Blu-ray Disc content on your computer, or the computer may become unstable during

Blu-ray Disc playback. To play content normally, download and install the latest updates for Blu-ray Disc playback software using the VAIO Update.

For information on how to use the VAIO Update, see Updating Your Computer

(page 33)

.

What should I do if I cannot write data to CD media?

❑ Make sure you neither launch any software application nor allow any to launch automatically, not even a screen saver.

❑ If you are using a CD-R/RW disc with an adhesive label affixed, replace it with one with no affixed adhesive label. Using a disc with an affixed adhesive label could cause a write error or other damage.

What should I do if I cannot write data to DVD media?

❑ Make sure you are using the correct DVD recordable media.

❑ Check which DVD recordable format is compatible with your optical disc drive. Some brands of DVD recordable media do not work.

Troubleshooting >

Optical Discs

n

186

N

Why can't I write data to Blu-ray Disc media?

❑ Check if your optical disc drive supports the Blu-ray Disc writing function.

❑ BD-R Disc media are not rewritable. You cannot add or erase data to or from the BD-R Disc media.

What should I do if my external optical disc drive does not work properly?

Make sure that your external optical disc drive is connected to an AC power source and the USB port. If it is not connected, the external optical disc drive may not work properly.

Troubleshooting >

Display

n

187

N

Display

Why did my screen go blank?

❑ Your computer screen may go blank if the computer loses power or enters a power saving mode (Sleep or Hibernate). If the computer is in LCD (Video) Sleep mode, press any key to bring the computer back into Normal mode. See Using the

Power Saving Modes (page 30)

for more information.

❑ Make sure your computer is securely plugged into a power source and turned on and the power indicator light is lit.

❑ If your computer is running on battery power, make sure the battery pack is installed properly and is charged. See Using

the Battery Pack

(page 21)

for more information.

❑ If the display output is directed to the external display, press the Windows+P keys twice and then press the Enter key to change the display output to the computer screen.

Troubleshooting >

Display

n

188

N

What should I do if I do not see proper images or videos?

❑ Be sure to select True Color (32 bit) for the display colors before using video/image software or starting DVD playback.

Selecting any other option may prevent such software from displaying images successfully. To change the display colors, follow these steps:

1

Right-click on the desktop and select Screen resolution.

2

Click Advanced settings.

3

Click the Monitor tab.

4

Select True Color (32 bit) under Colors.

❑ Do not change the display resolution or colors while using video/image software or playing DVDs, as it may cause unsuccessful playback/display or unstable system operations.

Additionally, it is recommended you disable your screen saver before starting DVD playback. If the screen saver is enabled, it may be activated during DVD playback and prevent the playback from running successfully. Some screen savers have been found to even change the display resolution and colors.

What should I do if some items do not fit on the computer screen?

Check that the text size is set to 100%. If not, some items, for example a software menu, may not be displayed correctly, depending on the software you are using. See Windows Help and Support for more information on how to change the text size.

Troubleshooting >

Display

n

189

N

What should I do if no image is displayed on my TV screen or external display connected to the HDMI output port?

❑ Make sure you are using an HDCP-compliant display. The copyright protected content is not displayed on a non-HDCP compliant display. See Connecting a TV with an HDMI Input Port

(page 118)

or Connecting a Computer Display or

a Projector (page 116)

for more information.

❑ If the docking station is connected to your computer and Computer Display mode is selected as the graphics mode, you cannot display content on the external display connected to the HDMI output port on the docking station. Change the graphics mode to External Display mode

(page 137)

.

What should I do if 3D images are not displayed on my 3D TV connected to the HDMI output port?

❑ Change the 3D playback settings. To change the settings, click

located at the lower right corner of the PowerDVD BD window. See the help file included with the PowerDVD BD for more information.

❑ If the computer is connected to your 3D TV through an AV amplifier, make sure the AV amplifier supports 3D playback.

❑ Check the HDMI output resolution settings on the computer. If the resolution is not set to 1920 x 1080 or 1280 x 720, images are not displayed in 3D.

❑ If you display 3D images on your 3D TV without connecting the docking station to your computer, follow these steps:

1

Follow the steps in To connect a TV to your computer

(page 118)

for connecting your 3D TV to the computer with an HDMI cable and set up the TV configuration system.

2

Press the Fn+F7 keys and select the 3D TV connected to the computer as the display output destination.

❑ You should also see the manual that came with your 3D TV for more information on 3D playback.

Troubleshooting >

Display

n

190

N

Why doesn't my screen display a video?

❑ If the display output is directed to the external display and the external display is disconnected, you cannot display a video on your computer screen. Stop video playback, change the display output to the computer screen, and then restart video playback. To change the display output to the computer screen, press the Windows+P keys twice and then press the

Enter key.

❑ The video memory of your computer may be insufficient for displaying high resolution videos. In such a case, lower the resolution of the LCD screen.

To change the screen resolution, follow these steps:

1

Right-click on the desktop and select Screen resolution.

2

Click the drop-down list next to Resolution.

3

Move the slider up to increase or down to decrease the screen resolution.

You can check the total amount of the graphics and video memory available. Right-click on the desktop, select Screen resolution, and click Advanced

Settings and the Adapter tab. The displayed value may be different from the actual amount of memory on your computer.

What should I do if my screen is dark?

❑ Press the Fn+F6 keys to brighten your computer screen.

❑ Blocking the ambient light sensor turns your screen dark. Make sure that the sensor is unblocked.

What should I do if the external display remains blank?

Press the Windows+P keys twice and then press the Enter key to change the display output to your computer screen.

Troubleshooting >

Display

n

191

N

How do I run Windows Aero?

To run Windows Aero, follow these steps:

1

Right-click on the desktop and select Personalize.

2

Select your desired theme from Aero Themes.

For information about the Windows Aero features, such as Windows Flip 3D, see Windows Help and Support.

What should I do if a software application does not work properly when the docking station is connected to my computer?

❑ If you are displaying images both on your computer screen and the external display connected to the computer or the docking station, select either display as the display output destination. To change the display output destination, see

Selecting Graphics Modes

(page 137)

.

❑ Disconnect the docking station from your computer.

How can I enhance my computer's performance?

By connecting the supplied or optional docking station to your computer, you can use the graphics accelerator on the docking station and enhance your computer's performance.

To display images on your computer screen, select Computer Display mode as the graphics mode. To display images only on the external display(s) connected to the docking station, select External Display mode and change the settings for the display output destination. See Selecting Graphics Modes

(page 137)

for more information.

Troubleshooting >

Display

n

192

N

Why can't I display the same images on my computer screen and the external display connected to the docking station?

You cannot display the same images individually on your computer screen and the external display(s) connected to the docking station at the same time.

Troubleshooting >

Printing

n

193

N

Printing

What should I do if I cannot print a document?

❑ Make sure your printer is on, and the printer cable is securely connected to the ports on the printer and your computer.

❑ Make sure your printer is compatible with the Windows operating system installed on your computer.

❑ You may need to install the printer driver software before you use your printer. See the manual that came with your printer for more information.

❑ If your printer is not functioning after your computer resumes from a power saving mode (Sleep or Hibernate), then restart the computer.

❑ If the bidirectional communication functions are provided with your printer, disabling the functions on your computer may enable printing. Follow these steps:

1

Click Start and Devices and Printers.

2

Right-click the printer icon and select Properties.

3

Click the Ports tab.

4

Click to cancel the Enable bidirectional support check box.

5

Click OK.

This disables the bidirectional communication functions of the printer, such as data transfer, status monitoring, and remote panel.

When your printer is connected to the docking station, check to see if the docking station is connected to an AC power source.

Troubleshooting >

Microphone

n

194

N

Microphone

What should I do if my microphone does not work?

❑ Your computer is not equipped with the microphone jack. You cannot use an external microphone.

❑ When using the noise canceling headphones as a microphone, make sure the headphones are properly plugged into the headphones jack on your computer.

❑ Your sound input device may have been incorrectly configured. To configure the sound input device, follow these steps:

1

Close all open programs.

2

Click Start and Control Panel.

3

Click Hardware and Sound.

4

Click Manage audio devices under Sound.

5

On the Recording tab, select your desired device for sound input and click Set Default.

How can I prevent microphone feedback?

Microphone feedback occurs when the microphone receives the sound from a sound output device, such as a speaker.

To prevent this problem:

❑ Keep the microphone away from a sound output device.

❑ Turn down the volume of the speakers and the microphone.

Troubleshooting >

Speakers

n

195

N

Speakers

What should I do if I do not hear sound from the built-in speakers?

❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information.

❑ The volume may have been turned off by the Fn+F2 keys. Press them once again.

❑ The volume may have been minimized by the Fn+F3 keys. Keep pressing the Fn+F4 keys to turn up the volume loud enough to hear sound.

❑ Check the Windows volume controls by clicking the volume icon on the taskbar.

❑ Your sound output device may have been incorrectly configured. To change the sound output device, see How do I

change the sound output device?

(page 200)

.

❑ You may not hear sound loud enough if an extended battery pack is attached to your computer.

Troubleshooting >

Speakers

n

196

N

What should I do if my external speakers do not work?

❑ Check the suggestions in What should I do if I do not hear sound from the built-in speakers?

(page 195)

.

❑ If you are using a program that has its own volume control, make sure the volume control is properly set. See the program's help file for more information.

❑ Make sure your speakers are properly connected and the volume is turned up loud enough to hear sound.

❑ Make sure your speakers are designed for computer use.

❑ If your speakers have a muting button, set the button to off.

❑ If your speakers require external power, make sure the speakers are connected to a power source. See the manual that came with your speakers for more information.

❑ Check the Windows volume controls by clicking the volume icon on the taskbar.

❑ Your sound output device may have been incorrectly configured. To change the sound output device, see How do I

change the sound output device?

(page 200)

.

Troubleshooting >

Touch Pad

n

197

N

Touch Pad

What should I do if the touch pad does not work?

❑ Slide your finger on the active zone to move the pointer. See Using the Touch Pad

(page 40)

.

❑ You may have disabled the touch pad. Press the Fn+F1 keys to enable it. See Using the Touch Pad

(page 40)

.

❑ Make sure that a mouse is not connected to your computer.

❑ If the pointer does not move while a software application is running, press the Alt+F4 keys to close the application window.

❑ If the Alt+F4 keys do not work, press the Windows key once and then the , key several times, select Restart with the

M or m key, and press the Enter key to restart your computer.

❑ If your computer does not restart, press the Ctrl+Alt+Delete keys, select the arrow next to the Shut down button with the m and , keys, press the Enter key, select Restart with the M or m key, and press the Enter key to restart your computer.

❑ If this procedure does not work, press and hold the power button until the computer turns off.

!

Turning off your computer with the Ctrl+Alt+Delete keys or the power button may cause loss of unsaved data.

Troubleshooting >

Keyboard

n

198

N

Keyboard

What should I do if the keyboard configuration is wrong?

The language layout of your computer's keyboard is labeled on the packaging box. If you choose a different regional keyboard when you complete the Windows setup, the key configuration will be mismatched.

To change the keyboard configuration, follow these steps:

1

Click Start and Control Panel.

2

Click Clock, Language, and Region, and then Change keyboards or other input methods under Region and

Language.

3

Click Change keyboards on the Keyboards and Languages tab.

4

Change the settings as desired.

What should I do if I cannot enter certain characters with the keyboard?

If you cannot enter U, I, O, P, J, K, L, M, and so on, the Num Lk key may be activated. Check that the Num lock indicator light is unlit. If the Num lock indicator is lit, press the Fn+Num Lk keys to turn it off before entering these characters.

Troubleshooting >

Floppy Disks

n

199

N

Floppy Disks

Why doesn't the Safely Remove Hardware and Eject Media icon appear on the taskbar when the drive is connected?

Your computer does not recognize the floppy disk drive. First, make sure the USB cable is properly connected to the USB port. If you need to secure the connection, wait a few moments for the computer to recognize the drive. If the icon still does not appear, follow these steps:

1

Close all programs that are accessing the floppy disk drive.

2

Wait until the indicator light on the floppy disk drive turns off.

3

Push the eject button to remove the disk, and unplug the USB floppy disk drive from your computer.

4

Reconnect the floppy disk drive by plugging the USB cable into the USB port.

5

Restart the computer by clicking Start, the arrow next to the Shut down button, and Restart.

What should I do if I cannot write data to a floppy disk?

❑ Make sure the floppy disk is properly inserted in the drive.

❑ If the disk is inserted properly and you are still unable to write data to it, the disk may be full or write-protected. You can either use a floppy disk that is not write-protected or disable the write-protect feature.

Troubleshooting >

Audio/Video

n

200

N

Audio/Video

How do I turn off the Windows startup sound?

To turn off the Windows startup sound, follow these steps:

1

Click Start and Control Panel.

2

Click Hardware and Sound.

3

Click Manage audio devices under Sound.

4

On the Sounds tab, click to cancel the Play Windows Startup sound check box.

5

Click OK.

How do I change the sound output device?

If you do not hear sound from the device connected to a port, such as the USB port, HDMI output port, optical output port, or headphones jack, you need to change the device for sound output.

1

Close all open programs.

2

Click Start and Control Panel.

3

Click Hardware and Sound.

4

Click Manage audio devices under Sound.

5

On the Playback tab, select your desired device for sound output and click Set Default.

Troubleshooting >

Audio/Video

n

201

N

What should I do if I do not hear the sound from the sound output device connected to the

HDMI output port, optical output port, or headphones jack?

❑ You need to change the sound output device if you want to hear sound from the device connected to a port, such as the

HDMI output port, optical output port, or headphones jack. For the detailed procedure, see How do I change the sound

output device? (page 200)

.

❑ If you still hear no sound from the sound output device, follow these steps:

1

Follow steps 1 to 4 in How do I change the sound output device?

(page 200)

.

2

On the Playback tab, select the HDMI or S/PDIF icon and click Properties.

3

Click the Advanced tab.

4

Select the sample rate and bit depth (for example, 48000 Hz, 16 bit) which the device supports.

5

Click OK.

Why do sound interruptions and/or dropped frames occur when I play high-definition videos, such as those recorded with the AVCHD digital video camcorder?

Playing high-definition videos requires substantial hardware resources, such as CPU, GPU, or system memory performance on your computer. During the video playback, some operations and/or functions may become unavailable, and sound interruptions, dropped frames, and playback failure may occur depending on the configuration of your computer.

Troubleshooting >

"Memory Stick"

n

202

N

"Memory Stick"

What should I do if I cannot use "Memory Stick" that was formatted on a VAIO computer on other devices?

You may need to reformat your "Memory Stick".

Formatting "Memory Stick" erases all data, including music data previously saved on it. Before you reformat "Memory Stick", back up important data and confirm that "Memory Stick" does not contain files you want to keep.

1

Copy the data from "Memory Stick" onto your built-in storage device to save data or images.

2

Format "Memory Stick" by following the steps in Formatting "Memory Stick"

(page 59)

.

Can I copy images from a digital camera using "Memory Stick"?

Yes, and you can view video clips that you have recorded with digital cameras that are compatible with "Memory Stick".

Why can't I write data to "Memory Stick"?

Some versions of "Memory Stick" are equipped with an erasure prevention switch to protect data from unintentional erasure or overwriting. Make sure the erasure prevention switch is off.

Troubleshooting >

Peripherals

n

203

N

Peripherals

What should I do if I cannot connect a USB device?

❑ If applicable, check the USB device is turned on and using its own power supply. For example, if you are using a digital camera, check if the battery is charged. If you are using a printer, check if the power cable is connected properly to an

AC outlet.

❑ Try using another USB port. The driver software could be installed to the specific port you used the first time you connected the device.

❑ See the manual that came with your USB device for more information. You may need to install software before you connect the device.

❑ Try connecting a simple, low-powered device such as a mouse to test if the port is working at all.

❑ USB hubs may prevent a device from working because of a power distribution failure. We recommend you connect the device directly to your computer without a hub.

Why can't I charge the USB device connected to the USB port that can supply power?

If your computer is off, in Hibernate mode, and in Sleep mode, connect the computer to an AC power source.

Troubleshooting >

Docking Station

n

204

N

Docking Station

What should I do if an error message appears when I disconnect the docking station from my computer?

❑ While any device inserted or connected to the docking station is in use or the optical disc drive is writing data to a disc, you cannot disconnect the docking station from your computer. Save unsaved data, exit applications that are using such devices, and then try again.

If the above does not work, shut down your computer and disconnect the docking station from the computer.

❑ When the battery pack is running out of power, you cannot disconnect the docking station from your computer. Charge the battery pack or shut down the computer and then try again.

❑ Be sure to return to the originally logged on user before disconnecting the docking station from your computer.

Disconnecting it as any other user may cause malfunctions.

For switching users, see Windows Help and Support.

❑ Close certain software applications which are using the graphics accelerator, such as game software, video playback software, or web browsers, before disconnecting the docking station from your computer.

Why doesn't the IN USE indicator light turn off even after the docking station is disconnected from my computer?

If the docking station is disconnected from your computer while the IN USE indicator light is lit, the indicator light stays lit. To turn off the IN USE indicator light:

❑ Disconnect the docking station from an AC power source.

❑ Connect the docking station to the computer again and disconnect it properly. See Disconnecting the Docking Station

from Your Computer

(page 112)

.

Trademarks >

n

205

N

Trademarks

SONY and the SONY logo are registered trademarks of Sony Corporation.

VAIO and the VAIO logo are trademarks or registered trademarks of Sony Corporation.

"BRAVIA" is a trademark of Sony Corporation.

and "Memory Stick", "Memory Stick Duo", "MagicGate", "OpenMG", "Memory Stick PRO", "Memory Stick PRO

Duo", "Memory Stick PRO-HG Duo", "Memory Stick Micro", "M2", and the "Memory Stick" logo are trademarks or registered trademarks of Sony Corporation.

Walkman is a registered trademark of Sony Corporation.

i.LINK is a name to denote IEEE 1394. i.LINK and i.LINK logo " " are the trademarks of Sony Corporation.

Intel, Pentium, Intel SpeedStep, and Atom are trademarks or registered trademarks of Intel Corporation.

Microsoft, MS-DOS, Windows, Windows Vista, BitLocker, Aero, and the Windows logo are trademarks of Microsoft group of companies.

Blu-ray Disc

, Blu-ray

, Blu-ray 3D

, the Blu-ray Disc logo, and the Blu-ray 3D logo are trademarks of the Blu-ray Disc

Association.

The BLUETOOTH word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

Roxio Easy Media Creator is a trademark of Sonic Solutions.

WinDVD is trademark of Corel Inc.

PowerDVD is trademark of CyberLink.Inc.

Trademarks >

n

206

N

NVIDIA and 3D Vision are registered trademarks and/or trademarks of NVIDIA Corporation in the United States and other countries.

ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. ArcSoft WebCam Companion is a trademark of

ArcSoft, Inc.

AMD, the AMD Arrow logo, ATI, and combinations thereof, Radeon, AMD Phenom, AMD Turion, AMD Athlon, AMD

Virtualization, AMD-V are trademarks of Advanced Micro Devices, Inc.

SD Logo is a trademark.

SDHC Logo is a trademark.

SDXC Logo is a trademark.

The ExpressCard word mark and logos are owned by the PCMCIA and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.

HDMI, the HDMI logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing

LLC.

CompactFlash

®

is a trademark of SanDisk Corporation.

, "XMB," and "xross media bar" are trademarks of Sony Corporation and Sony Computer Entertainment Inc.

"PlaceEngine" is a registered trademark of Koozyt, Inc.

"PlaceEngine" was developed by Sony Computer Science Laboratories, Inc. and is licensed by Koozyt, Inc.

"TransferJet" and the "TransferJet" logo are trademarks of Sony Corporation.

"AVCHD" is a trademark of Panasonic Corporation and Sony Corporation.

Trademarks >

n

207

N

All other names of systems, products, and services are trademarks of their respective owners. In the manual, the ™ or ® marks are not specified.

Features and specifications are subject to change without notice.

All other trademarks are trademarks of their respective owners.

Not all the software listed above may be delivered with your model.

Notice >

n

208

N

Notice

© 2011 Sony Corporation. All rights reserved.

This manual and the software described herein, in whole or in part, may not be reproduced, translated, or reduced to any machine-readable form without prior written approval.

Sony Corporation provides no warranty with regard to this manual, the software, or other information contained herein and hereby expressly disclaims any implied warranties or merchantability or fitness for any particular purpose with regard to this manual, the software, or such other information. In no event shall Sony Corporation be liable for any incidental, consequential, or special damages, whether based on tort, contract, or otherwise, arising out of or in connection with this manual, the software, or other information contained herein or the use thereof.

In the manual, the ™ or ® marks are not specified.

Sony Corporation reserves the right to make any modification to this manual or the information contained herein at any time without notice. The software described herein is governed by the terms of a separate user license agreement.

Sony Corporation is not liable and will not compensate for any lost recordings made to your computer, external recording media, or recording devices or any relevant losses, including when recordings are not made due to reasons including your computer failure, or when the contents of a recording are lost or damaged as a result of your computer failure or repair undertaken to your computer. Sony Corporation will not restore, recover, or replicate the recorded contents made to your computer, external recording media, or recording devices under any circumstances.

n

© 2011 Sony Corporation

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Laptop Clamshell Black
  • Intel® Core™ i7 i7-2620M 2.7 GHz
  • 33.3 cm (13.1") Full HD 1920 x 1080 pixels LED backlight 16:9
  • 8 GB DDR3-SDRAM 1333 MHz
  • 256 GB SSD
  • AMD Radeon HD 6650M Intel® HD Graphics 3000
  • Ethernet LAN 10,100,1000 Mbit/s Bluetooth 2.1+EDR
  • Lithium-Ion (Li-Ion) 6.5 h
  • Windows 7 Professional 64-bit

Related manuals

Download PDF

advertisement

Table of contents