Sony | CMT-DH5BT | Sony CMT-DH5BT User manual

Sony CMT-DH5BT User manual
3-097-195-24(1)
Micro HI-FI
Component System
Operating Instructions
CMT-DH5BT
Printed in China
© 2007 Sony Corporation
WARNING
To reduce the risk of fire or
electric shock, do not expose
this apparatus to rain or
moisture.
To reduce the risk of fire, do not cover
the ventilation of the apparatus with
newspapers, tablecloths, curtains, etc.
And do not place lighted candles on the
apparatus.
To reduce the risk of fire or electric shock,
do not place objects filled with liquids,
such as vases, on the apparatus.
Connect the unit to an easily accessible AC
outlet. Should you notice an abnormality
in the unit, disconnect the main plug from
the AC outlet immediately.
Do not install the appliance in a confined
space, such as a bookcase or built-in
cabinet.
Do not expose the battery to excessive heat
such as direct sunlight, fire or the like.
Except for customers in the U.S.A.
and Canada
This appliance is classified as a CLASS 1
LASER product. This marking is located
on the rear exterior.
GB
GB
About this manual
Icons, such as
, listed at the top
of each explanation indicate what kind
of media can be used with the function
being explained.
The English on-screen display is used
for illustration purposes only.
The Control Menu items may be
different depending on the disc.
The Setup Menu items may be different
depending on the area.
GB
Table of Contents
About this manual................................ 4
Playable discs......................................... 7
Guide to parts and controls............12
Tuner
Listening to the radio........................61
Getting Started
Bluetooth Device
Hooking up the system....................19
Hooking up the TV.............................21
Setting the clock.................................24
Performing QUICK SETUP................25
Using the THEATRE SYNC
function..................................................27
Using the Bluetooth function.........63
Disc
Playing a disc........................................28
 Normal Play
Using play mode.................................34
Searching/selecting a disc...............39
Playing MP3/JPEG discs....................42
Enjoying DivX® video files................48
Adjusting the delay between the
picture and sound..............................50
 A/V SYNC
Restricting playback of the disc.....51
 CUSTOM PARENTAL CONTROL,
PARENTAL CONTROL
Using the DVD setup menu............56
USB Device
Listening to music of
an USB device.......................................70
Creating your own program with
the USB device.....................................73
 Program Play
Sound Adjustment
Adjusting the sound..........................75
Singing along: Karaoke.....................75
Other Operations
Using the timer....................................81
Changing the display........................83
Viewing information
about the disc .....................................83
Hooking up optional
components..........................................87
Continued

GB
Additional Information
Troubleshooting..................................89
Precautions......................................... 102
Specifications.................................... 104
Guide to the Control Menu
display.................................................. 107
Language code list.......................... 111
Bluetooth wireless
technology......................................... 113
Playable USB devices and
Bluetooth devices............................ 115
Glossary............................................... 116
Index..................................................... 120
GB
Playable discs
Type
DVD VIDEO
Characteristics
Icon used in
this manual
Logo
DVD VIDEO
DVD-R*/-RW*/+R/+RW
in DVD VIDEO format
* also in video mode
VR mode
VIDEO CD
DVD-R/-RW
in VR (Video Recording) mode
VIDEO CD
Super VCD*
CD-ROM*/-R*/-RW*
* in VIDEO CD or Super VCD format
CD
AUDIO CD*
CD-R*/-RW*
* in AUDIO CD format
DATA CD
CD-ROM/-R/-RW
in DATA CD format, containing
MP3 audio tracks1), JPEG image
files2) or DivX video files3), and
conforming to ISO 96604) Level
1 or Level 2, or Joliet (expansion
format).
Continued

GB
Type
DATA DVD
Characteristics
Icon used in
this manual
Logo
DVD-ROM/-R/-RW/+R/+RW
in DATA DVD format containing
MP3 audio tracks1), JPEG image
files2) or DivX video files3), and
conforming to UDF (Universal Disk
Format).
This system can also play back discs with the following disc logos:
MP3 (MPEG 1 Audio Layer 3) is a standard format defined by ISO/MPEG which compresses audio
data. MP3 audio tracks must be in MPEG 1 Audio Layer 3 format.
2)
JPEG image files must conform to the DCF image file format. (DCF “Design rule for Camera
File System”: Image standards for digital cameras regulated by Japan Electronics and Information
Technology Industries Association (JEITA)).
3)
DivX video files must be recorded in DivX format with the extension “.AVI” or “.DIVX”.
4)
A logical format of files and folders on CD-ROMs, defined by ISO (International Organization for
Standardization).
1)
“DVD+RW,” “DVD-RW,” “DVD+R,” “DVD VIDEO,” and the “CD” logos are trademarks.
GB
Discs that cannot be played
CD-ROMs recorded in PHOTO CD
format
DATA CDs recorded in MP3 PRO
format
Data part of CD-Extras1)
Data part of Mixed CDs2)
Super Audio CDs
DVD Audio discs
DVD-RAMs
A DVD VIDEO with a different region
code.
A disc that has a non-standard shape
(e.g., heart, square, star).
A disc that has the adhesive cellophane
tape or a sticker still left on it.
CD-Extra: This format records audio
(AUDIO CD data) on the tracks in session 1
and data on the tracks in session 2.
2)
Mixed CD: This format records data on the
first track and audio (AUDIO CD data)
on the second and subsequent tracks of a
session.
1)
Region code of DVD VIDEOs you
can play back on this system
Your system has a region code printed
on the back of the unit and will only
play back DVD VIDEOs labeled with
identical region code.
DVD VIDEOs labeled
will also be
played back on this system.
If you try to play back any other region
code DVD VIDEO, the message
“Playback prohibited by area limitations.”
will appear on the TV screen. Depending
on the DVD VIDEO, no region code
indication may be labeled even though
playing the DVD VIDEO is prohibited by
area restrictions.
Note on DualDiscs
A DualDisc is a two sided disc product
which mates DVD recorded material on
one side with digital audio material on
the other side. However, since the audio
material side does not conform to the
Compact Disc (CD) standard, playback
on this product is not guaranteed.
Continued

GB
Notes on CD-R/-RW and
DVD‑R/-RW/+R/+RW
In some cases, CD-Rs/-RWs and
DVD-Rs/-RWs/+Rs/+RWs cannot be
played back on this system due to the
recording quality or physical condition
of the disc, or the characteristics of
the recording device and authoring
software. The disc will not be played
back if it has not been correctly
finalized. For more information, see
the operation instructions for the
recording device.
Note that some playback functions
may not work with some DVD+Rs/
+RWs, even if they have been correctly
finalized. In this case, view the disc by
normal playback.
A disc created in Packet Write format
cannot be played back.
Note on playback operations of
DVD VIDEOs and VIDEO CDs
Some playback operations of DVD
VIDEOs and VIDEO CDs may be
intentionally set by software producers.
Since this system play back DVD
VIDEOs and VIDEO CDs according to
the disc contents the software producers
designed, some playback features may
not be available. Also, refer to the
instructions supplied with the DVD
VIDEOs or VIDEO CDs.
10GB
Music discs encoded with
copyright protection technologies
This product is designed to play back
discs that conform to the Compact Disc
(CD) standard. Recently, various music
discs encoded with copyright protection
technologies are marketed by some
record companies. Please be aware that
among those discs, there are some that
do not conform to the CD standard and
may not be playable by this product.
Notes on Multi Session disc
This system can play back Multi
Session discs when an MP3 audio
track, a JPEG image file or a DivX
video file is contained in the first
session. Any subsequent MP3 audio
tracks, image files or DivX video files
recorded in later sessions can also be
played back.
If the first session is recorded in
AUDIO CD or VIDEO CD format,
only the first session will be played
back.
The system will recognize a Multi
Session disc as an AUDIO CD if there
is a session recorded in AUDIO CD
format on the disc. However, the
system will only play back the disc if
the first session is recorded in AUDIO
CD format.
With DATA CD or DATA DVD, the
system will only play back DivX video
files even if it contains MP3 audio
tracks or JPEG image files.
Copyrights
This product incorporates copyright
protection technology that is protected
by U.S. patents and other intellectual
property rights. Use of this copyright
protection technology must be
authorized by Macrovision, and is
intended for home and other limited
viewing uses only unless otherwise
authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
“WALKMAN” and “WALKMAN”
logo are registered trademarks of Sony
Corporation.
MICROVAULT is a trademark of Sony
Corporation.
ATRAC, ATRAC3, ATRAC3plus and
their logos are trademarks of Sony
Corporation.
MPEG Layer-3 audio coding
technology and patents licensed from
Fraunhofer IIS and Thomson.
This system incorporates Dolby*
Digital and the DTS** Digital
Surround System.
* Manufactured under license from Dolby
Laboratories.
“Dolby” and the double-D symbol are
trademarks of Dolby Laboratories.
**“DTS” is a registered trademark of DTS,
Inc. and “DTS 2.0 + Digital Out” is a
trademark of DTS, Inc.
U.S. and foreign patents licensed from
Dolby Laboratories.
DivX is a video file compression
technology, developed by DivX, Inc.
DivX, DivX Certified, and associated
logos are trademarks of DivX, Inc. and
are used under license.
The Bluetooth word mark and logos
are owned by the Bluetooth SIG, Inc.
and any use of such marks by Sony
Corporation is under license. Other
trademarks and trade names are those
of their respective owners.
®
11GB
Guide to parts and controls
This manual mainly explains operations using the remote, but the same operations can
also be performed using the buttons on the unit having the same or similar names.
Front panel
Top panel
12GB
Remote control

Lights up when the system is turned off.

BLUETOOTH indicator (68, 69)
Lights up when the Bluetooth function
is active.

BLUETOOTH OPR (66, 68, 69)
Press to make a connection,
disconnection, or pairing with a
Bluetooth device.
Guide to parts and controls
STANDBY indicator (89)

 (eject) (30)
Press to eject the disc.

Disc slot

+/ (27, 29, 64, 71, 74)
Press to select an album.

(USB) port (70)

Unit:  (on/standby) (24, 25,
61, 82, 98)
Remote: TV 1) (on/standby)
(23)
Connect to an optional USB device
(Digital music player or USB storage
media).
Press to turn on the system.
Press to turn on the TV.
Continued

13GB


PRESET +/ (62)
PHONES jack
Press to select the preset station.
/ (go backward/
forward) (29, 44, 49, 66, 71, 74)
Press to select a track or file.
Remote: TV CH +/1) (23)
Press to change the TV channels.
Remote: SLOW
/
(29)
Press to watch the slow‑motion play.
Remote: TUNING +/ (61)
Press to tune in the desired station.
/ (rewind/fast forward)
(29, 66, 71)
Press to find a point in a track or file.

DISPLAY (71, 83)
Press to display the disc information or
clock in the front panel display.

PROGRESSIVE (22, 88)
Press to change the output video format
(Interlace or Progressive format).

DSGX (75)
Press to reinforce the bass.

ECHO LEVEL (75)
2)
Turn to adjust the microphone echo.
MIC LEVEL (75)
Turn to adjust the microphone volume.
MIC jack (75)

IR Receptor

Unit: DVD  (play) (22, 28)
Connect to a microphone.
Press to select the DVD function.
Press to start playback of a disc.

Unit: USB  (play) (71, 74)
AUDIO IN jack (88)
Connect to an optional audio
component.
14GB
Connect the headphones.
Press to select the USB function.
Press to start playback an optional USB
device (Digital music player or USB
storage media).

Press to select the Bluetooth function.
Press to start playback of the music on
the Bluetooth device (Bluetooth mobile
phone, etc.).
DIMMER (83)
Press to adjust the brightness of the
display.
Unit: TUNER/BAND (61)
PICTURE NAVI (41)
Press to select the TUNER function.
Press to switch among FM and AM band.
Unit: AUDIO IN
Press to select the AUDIO IN function.
FUNCTION +/ (22, 28, 61, 64, 65,
67, 69, 70, 73, 75)
Press to select the function.

 (stop) (29, 61, 66, 71)
 (pause) (29, 66, 71)
Press to stop or pause playback.
Remote:  (play) (28, 35, 43,
49, 54, 65, 71, 74)
3)
Press to start playback.

VOLUME +/ (28, 66, 69, 71)
3)

Press to select the VIEWER format for
searching the chapters, titles and tracks.
Press to display the thumbnail pictures.

REPEAT/FM MODE (38, 62, 71)
Press to listen to a disc, a single track or
file repeatedly.
Press to select FM reception mode
(monaural or stereo).
Guide to parts and controls
Unit: BLUETOOTH  (64, 65)

AUDIO (31, 76, 77, 86)
Press to display the current audio signal
on the TV screen.

SUBTITLE (30)
Press to switch the language of the
subtitle (DVD VIDEO).
Press to adjust the volume.
TV VOL +/1)3) (23)
Press to adjust the TV volume.
Continued

15GB


ANGLE (30)
ADVANCE
Press to advance the current scene during
playback.

Press to replay the previous scene during
playback.
DVD/USB/TUNER MENU (39, 46,
62)
Press to display the MENU items on the
TV screen.
Press to preset the radio station.
Press to select the play mode when using
an optional USB device.

EQ (75)
Press to select the sound effect.

DISPLAY (26, 34, 39, 46, 50, 51,
56, 78, 87, 99)
REPLAY
(29)
 STEP/ STEP  (29)
Press to play one frame at a time when
playback is paused.

 RETURN (33)
Press to return to the previous menu on
the TV screen.

/// (24, 25, 34, 36, 37, 39,
43, 71, 73, 81)
Press to select the MENU items.
ENTER (24, 42, 62, 73)
Press to display the Control Menu on the
TV screen.
Press to enter the settings.

DVD TOP MENU (39)
TV1) (23)
Press to operate the TV functions.
16GB
(29)
Press to change the angle (DVD VIDEO
with multi-angles only).

Press to display the DVD title on the TV
screen.

CLEAR (35, 41, 65, 68, 74)
TIME/TEXT (83)
Press to delete a pre-programmed track
or file.
Press to erase the pairing registration
information of the Bluetooth device.
Press to change the information in the
front panel display.
-/--1)
Press to enter a single digit or double
digit number.

TV/VIDEO1) (23)
Press to switch the input sources.
SLEEP (81)
Press to set the Sleep Timer.

Numeric buttons (23, 29, 32, 39,
53, 64)

Press to select a track or file.
Press to enter a password or passcode.
Press to set the clock and the timers.
3)
10/0
1)
Press to enter a double digit number.

KEY CONTROL / (80)
Press to change the key to suit your vocal
range.
SCORE (79)
Press to select the difficulty level for
scoring mode.
KARAOKE MODE (76)
TIMER MENU (24, 81)
Guide to parts and controls


THEATRE SYNC (27)
Press to activate the THEATRE SYNC
function.
This button is used to operate a Sony TV. For
details, see “Operating a Sony TV” (page 23).
Except for European and Russian models.
3)
The numeric button 5, TV VOL +,
VOLUME +  and   buttons have a
tactile dot. Use the tactile dot as a reference
when operating the system.
1)
2)
Press to select the Karaoke mode.
KARAOKE PON (80)
Press to activate the KARAOKE PON
function.
Continued

17GB
Display
Indicates the selected function.
Indicates the selected play mode. (34)
Lights up when timer is set. (81)
Lights up when a station is tuned in.
(61)
Lights up when DSGX is turned on.
(75)
Indicates the Playback status.
Lights up when DTS is selected. (59)
Lights up when Dolby Digital is
selected. (59)
Lights up when an optional USB
device is connected. (70)
Lights up when “P AUTO” or
“P VIDEO” is selected. (22)
18GB
Lights up when the output video
signal is NTSC. (22)
Lights up when playing VIDEO CD
with PBC. (32)
Indicates the type of audio format.
Indicates the track/album
information.
Lights up when chapter or title
number is displayed.
Indicates the type of disc being played
back. (28)
Displays the text information.
Getting Started
Getting Started
Hooking up the system
or
Right speaker
Wall socket
Left speaker
 AM loop antenna
 White side for North American model
 Brown side for other regions
 FM lead antenna (Extend it horizontally.)
 FM/AM antennas
Find a location and an orientation that
provide good reception, and then set up
the antenna.
Keep the antennas away from the speaker
cords, the power cord to avoid picking
up noise.
 Speakers
Continued

19GB
 Power
Connect the power cord to a wall socket.
If the supplied adaptor on the plug does
not fit your wall socket, detach it from
the plug (only for models equipped with
an adaptor).
Attaching the speaker pads
Attach the supplied speaker pads at each
corner on the bottom of the speakers
to stabilize the speakers and to prevent
them from slipping.
Inserting two R6 (size AA)
batteries into the remote
Slide and remove the battery
compartment lid, and insert the two
supplied R6 (size AA) batteries,  side
first, matching the polarities shown
below.
When carrying this system
Perform the following procedure to
protect the DVD mechanism.
Use buttons on the unit for the
operation.
1 Press /  to turn on the
system, then press DVD  .
Note
If you do not use the remote for a long period
of time, remove the batteries to avoid possible
damage from battery leakage and corrosion.
Tip
With normal use, the batteries should last for
about six months. When the remote no longer
operates the system, replace both batteries with
new ones.
20GB
2 Make sure that no disc is loaded
in the system and check that “No
Disc” appears.
3 Press /  to turn off the
system and check that “STANDBY”
disappears.
4 Unplug the power cord.
Hooking up the TV
Connect the video deck to the TV using
a video cord (not supplied). However, do
not connect this unit to the TV through
the video deck. Otherwise, you may
experience video leakage when watching
video images from this system. Connect
this unit directly to the TV as shown
below.
TV
Video deck
Getting Started
Connect the video input jack of your
TV to the VIDEO OUT jack with the
supplied video cord.
When connecting a video deck
Unit
Do not connect
directly
Tip
For higher quality video images:
 Use the optional component video cords to
connect the COMPONENT VIDEO input
jacks on your TV to the COMPONENT
VIDEO OUT jacks of this unit. If your
TV is compatible with progressive format
file signals, use this connection and press
PROGRESSIVE  on the unit repeatedly
until “P AUTO” or “P VIDEO” appears in
the display (page 22).
 You can use an optional S Video cord to
connect the S VIDEO input jack on your
TV to the S VIDEO OUT jack of this unit.
Continued

21GB
Changing the color system
(Except for European and Russian
models)
Set the color system to PAL or NTSC
depending on the color system of your
TV.
The default setting for color system is
different depending on the area.
Each time you perform the procedure
below, the color system changes as
follows:
NTSC  PAL
1 Press FUNCTION +/–  repeatedly to
select “DVD” (or press DVD   on
the unit).
2 Press /  to turn off the system.
3 Press DISPLAY  to display the clock.
4 While the clock is displayed, hold
down   then press / .
The system turns on automatically and
the color system is changed.
“COLOR NTSC” or “COLOR PAL”
appears in the display.
Note
“––:––” appears in the display if you have not
set the clock.
Changing the format of the
video signal output from
COMPONENT VIDEO OUT jacks
Progressive is a method for displaying
TV images that reduces flickering and
sharpens the image. To use this method,
you need to connect to a TV that can
accept progressive signals.
You can output video signals from
COMPONENT VIDEO OUT jacks in
Interlace or Progressive format.
1 Press FUNCTION +/ 
repeatedly to select “DVD” (or
press DVD   on the unit).
2 Press PROGRESSIVE  on the
unit repeatedly.
Select “P AUTO” or “P VIDEO” if
your TV accepts progressive signals
and the TV is connected to the
COMPONENT VIDEO OUT jacks.
Otherwise, select “INTERLACE.”
P AUTO (PROGRESSIVE AUTO):
The system automatically detects
the software type and selects the
appropriate conversion method.
P VIDEO (PROGRESSIVE VIDEO):
The system fixes the conversion
method to PROGRESSIVE VIDEO
for video-based software.
Select this if the image is not clear
when you select “P AUTO.”
22GB
About DVD VIDEO software types and
the conversion method
Some DVD VIDEO contains both types
of software. In order for these images to
appear in your TV naturally when the
video output is in progressive format, the
progressive signals need to be converted
to match your DVD VIDEO software.
Note
There would be no image on your TV or the
image is not clear if your setting does not
match your TV or connection.
Turn on the TV and select the video
input so that you can view the pictures
from this system.
Operating a Sony TV
You can use the following buttons to
operate a Sony TV. These buttons have
been marked in orange.
To
Turn the TV on
or off
Switch the TV’s
input source
between the TV
and other input
sources
Select the TV
channels
Adjust the
volume of the TV
speaker(s)
Press
TV /  while
holding down TV
.
TV/VIDEO 
while holding down
TV .
Getting Started
The DVD VIDEO software can be
divided into 2 types:
Film-based software
Film-based software is derived from
film and displays the images at 24
frames per second.
Video-based software
Video-based software is derived from
TV, such as dramas and sitcoms and
displays images at 30 frames or 60
fields per second.
When using a TV
TV CH +/ 
or numeric
buttons * while
holding down TV
.
TV VOL +/ 
while holding down
TV .
* For double digit number, hold down TV 
and press -/-- , then press the number.
(For example, hold down TV ,
press -/-- , then 2 and 5 for entering 25.)
23GB
Setting the clock
Use buttons on the remote to set the
clock.
1 Press /  to turn on the
system.
2 Press TIMER MENU .
The hour indication flashes in the
display.
If “PLAY SET?” flashes in the
display, press  or   repeatedly
to select “CLOCK SET?,” then press
ENTER .
3 Press  or   repeatedly to set
the hour.
4 Press ENTER .
The minute indication flashes in the
display.
5 Press  or   repeatedly to set
the minutes.
6 Press ENTER .
The clock starts functioning.
24GB
Note
The clock settings are canceled when you
disconnect the power cord or if a power failure
occurs.
To display the clock when the system
is off
Press DISPLAY .
The clock is displayed for about
8 seconds.
Performing QUICK
SETUP
4 Press ENTER  without
inserting a disc.
“LANGUAGE SETUP” appears on
the TV screen.
Getting Started
Before using the system, you can make
the minimum basic adjustments in
QUICK SETUP. If you do not want
to perform QUICK SETUP, press
CLEAR  in step 3. The guide message
will disappear from the TV screen.
1 Turn on your TV and select the
video input.
2 Press /  to turn on the
system.
Note
Make sure there is no disc in the unit.
Otherwise, the guide message does not
appear. To perform QUICK SETUP, press
  on the unit to remove the disc.
3 Press FUNCTION +/ 
repeatedly to select “DVD” (or
press DVD   on the unit).
5 Press  or   repeatedly to
select a language, then press
ENTER .
The setting is selected and “SCREEN
SETUP” appears on the TV screen.
Tips
The selected language is for “OSD,”
“MENU” and “SUBTITLE.”
The selectable language is different
depending on the area.
The guide message appears at the
bottom of the TV screen.
Continued

25GB
6 Press  or   repeatedly to
select the setting that matches
your TV type.
If you have a 4:3 standard TV:
Select “4:3 LETTER BOX” or “4:3
PAN SCAN” (page 58)
If you have a wide-screen TV or a
4:3 standard TV with wide-screen
mode:
Select “16:9” (page 58)
7 Press ENTER .
The setting is selected and “QUICK
SETUP is complete.” appears on the
TV screen.
The system is ready for playback.
If you want to change each setting
individually, see “Using the DVD
setup menu” (page 56).
To quit QUICK SETUP
Press
26GB
DISPLAY .
To recall QUICK SETUP display
1 Press
DISPLAY  when playback
is stopped.
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly to
select
ENTER .
(SETUP), then press
3 Press  or   repeatedly to select
“QUICK,” then press ENTER .
Note
The guide message appears at the bottom of
the TV screen when you turn on the system
for the first time or after performing “RESET”
(page 98).
Using the THEATRE
SYNC function
Preparing to use the THEATRE
SYNC function
Register the TV’s input source connected
to this system.
To select the TV’s input
Press the following buttons while holding
down SLEEP .
Press
0
TV’s input source
No input source
(Default)
1 to 8
9
CLEAR 

VIDEO 1 to VIDEO 8
COMPONENT 1
COMPONENT 2
COMPONENT 3
+
COMPONENT 4
Keep the remote pointed in the
direction of the TV until the TV is
turned on and the input source
is changed correctly, then press
THEATRE SYNC .
If this function does not work, change the
transmission time. The transmission time
varies depending on the TV.
Getting Started
THEATRE SYNC allows you to turn on
your Sony TV and this system, changes
the system’s function to “DVD” and then
switches the TV’s input source you have
set with just one button.
Operating the THEATRE SYNC
function
To change the transmission time
Press the following buttons while holding
down  .
Press
1
2
3
4
5
6
7
8
Transmission time
0.5 (Default)
1
1.5
2
2.5
3
3.5
4
The selected TV’s input source is
memorized into the remote.
27GB
2 Insert a disc in the disc slot 
Disc
with the label side facing up.
Playing a disc
 Normal Play
If the playback does not start
automatically, press   (or DVD
  on the unit).
Depending on the DVD VIDEO or
VIDEO CD, some operations may
be different or restricted. Refer to the
operating instructions supplied with the
disc.
Example: When playing a DVD VIDEO
3 Press VOLUME +/  to adjust
the volume.
Title number
Elapsed playing time
1 Press FUNCTION +/ 
repeatedly to select “DVD” (or
press DVD   on the unit).
28GB
Notes
Depending on the system status, the volume
level may not appear on the TV screen.
When you turn on the system, the disc is not
pulled into the disc slot  until “No Disc”
appears in the display. Do not attempt to
push in the disc until “No Disc” appears.
Do not load an 8 cm disc with an adaptor.
Doing so may cause the system to
malfunction.
When you remove a disc, handle the disc by
its edge and pull it straight out of the disc slot
. Do not touch the surface.
Other operations
Press
SLOW
or
 when
SLOW
playback is paused.
Each time you
press SLOW
or
, the
SLOW
playback speed
changes.
To return to normal
playback, press  
(or DVD   on the
unit).
Play one
STEP   to go to
frame at a
the next frame when
time (Freeze
playback is paused.
6)
Frame)
Press  STEP 7)
to go to the preceding
frame when playback is
paused.
To return to normal
playback, press  
(or DVD   on the
unit).
 during
Replay the
REPLAY
previous scene playback. (Instant
Replay)7)

Briefly fast
ADVANCE
forward the
during playback.
current scene (Instant Advance)7)
Continued

Disc
To
Press
Stop playback  .
Pause playback  . Press   again
or   (or DVD
  on the unit) to
resume playback.
Select a track1),  or  
chapter or
repeatedly during
video file
playback.
Or, press the numeric
buttons  when
the Control Menu is
turned off, then press
ENTER 2).
Select an
+/  repeatedly
album3)
during playback or
when playback is
paused.
Locate a point  or  
quickly in fast during playback.
forward or fast Each time you press
reverse (Lock  or  , the
Search)4)5)
playback speed changes
cyclically.
To return to normal
playback, press  
(or DVD   on the
unit).
To
Watch frame by
frame (Slowmotion Play)6)
29GB
To
Switch to DVD
function from
another source
Remove the
disc
Press
FUNCTION +/ 
repeatedly (or press
DVD   on the
unit) (Automatic
Source Selection).
  on the unit.
You cannot select an audio track during Lock
Search operation of MP3 audio tracks.
2)
DVD VIDEO, DVD-R/-RW in VR mode,
VIDEO CD, AUDIO CD and DivX video
files only.
3)
MP3 audio tracks, JPEG image files and DivX
video files only.
4)
Except for JPEG image files.
5)
Depending on the disc, the actual speed may
differ.
6)
DVD VIDEO, DVD-R/-RW in VR mode,
DivX video files and VIDEO CD only.
7)
DVD VIDEO and DVD-R/-RW in VR mode
only.
1)
Notes
You cannot search for a still picture on a
DVD-R/-RW in VR mode.
You may not be able to use the Instant Replay
or Instant Advance function in Repeat Play
mode or with some scenes.
Displaying multi-angles and
subtitles
Changing the angles
(DVD VIDEO only)
You can change the viewing angle while
playing a DVD VIDEO on which various
angles (multi-angles) for a scene are
recorded.
Press ANGLE  repeatedly during
playback. Each time you press
ANGLE , the angle changes.
Note
Depending on the DVD VIDEO, you may not
be able to change the angle, even if multi-angles
are recorded on the DVD VIDEO.
Displaying the subtitles
(DVD VIDEO, DVD-R/-RW in VR
mode and DivX video files only)
You can turn the subtitles on or off while
playing a DVD VIDEO, DVD-R/-RW in
VR mode or DivX video files on which
subtitles are recorded. You can also
change the language of the subtitles with
DVD VIDEO, DVD-R/-RW in VR mode
or DivX video files on which multilingual
subtitles are recorded.
Press SUBTITLE  repeatedly
during playback. Each time you press
SUBTITLE , the subtitle language
changes or turns off.
30GB
Notes
Other useful functions
Changing the sound
When playing a DVD VIDEO or a DivX
video file recorded in multiple audio
formats, you can select the audio format
you want. If the DVD VIDEO is recorded
with multilingual tracks, you can also
change the language.
When playing a VIDEO CD, AUDIO
CD or MP3 audio tracks, you can select
the sound from the right or left channel
and listen to the sound of the selected
channel through both the right and left
speakers. For example, when playing a
track with the vocals on the right channel
and the instruments on the left channel,
you can hear the instruments from both
speakers by selecting the left channel.
Press AUDIO  repeatedly during
playback to select the audio signal you
want.
The default settings are underlined.
When playing a DVD VIDEO:
Depending on the DVD VIDEO, the
option of language and audio format
varies.
When a 4-digit number is displayed, the
digits represent a language code (see
“Language code list” (page 111)). When
the same language is displayed two or
more times, the DVD VIDEO is recorded
in multiple audio formats. Note that the
sound changes automatically depending
on the disc.
Disc
Depending on the DVD VIDEO, you may
not be able to change the subtitles even if
multilingual subtitles are recorded on the
DVD VIDEO. You also may not be able to
turn the subtitles off.
You can change the subtitles if the DivX
video file has an “.AVI” or “.DivX” extension
and contains subtitle information within the
same file.
When playing a DVD-R/-RW in VR
mode:
The number of audio tracks recorded on
a disc is displayed.
Example:
1: MAIN: the main sound of the audio
track 1.
1: SUB: the sub sound of the audio
track 1.
1: MAIN+SUB: the main and sub
sound of the audio track 1.
2: MAIN*: the main sound of the audio
track 2.
2: SUB*: the sub sound of the audio
track 2.
2: MAIN+SUB*: the main and sub
sound of the audio track 2.
* These items do not appear if only one audio
stream is recorded on the disc being played
back.
Continued

31GB
When playing a DivX video file:
The options for audio format differ
depending on the DivX video files.
When playing a VIDEO CD, AUDIO CD,
or MP3 audio track:
STEREO: the standard stereo sound.
1/L: the sound of the left channel
(monaural).
2/R: the sound of the right channel
(monaural).
When playing a Super VCD:
1: STEREO: the stereo sound of the
audio track 1.
1: 1/L: the sound of the left channel of
the audio track 1 (monaural).
1: 2/R: the sound of the right channel
of the audio track 1 (monaural).
2: STEREO: the stereo sound of the
audio track 2.
2: 1/L: the sound of the left channel of
the audio track 2 (monaural).
2: 2/R: the sound of the right channel
of the audio track 2 (monaural).
Playing VIDEO CDs with PBC functions
(Version 2.0)  PBC Playback
(VIDEO CD only)
You can use the PBC (Playback Control)
menus on your TV screen to enjoy
the disc’s interactive software. The
menu format and structure may differ
depending on each disc.
1 Press   (or DVD   on the
unit) to start playing a VIDEO CD with
PBC functions (Version 2.0).
The PBC menu appears on the TV
screen. Depending on the VIDEO CD,
the menu may not appear.
2 Press the numeric buttons  to
select the item number you want.
3 Press ENTER .
Depending on the VIDEO CD,
“Press ENTER” may appear as “Press
SELECT” in the operating instructions
supplied with the disc. In this case,
press   (or DVD   on the
unit).
4 Continue playback according to the
instructions on the menus.
Refer to the operating instructions
supplied with the VIDEO CD, as
the operating procedure may differ
depending on the VIDEO CD.
32GB
To return to the previous menu
Press  RETURN .
Note
PBC playback is canceled when Shuffle Play,
Program Play or Repeat Play is activated.
1 Press  or   repeatedly
or press the numeric buttons 
to select a track when playback is
stopped.
2 Press   (or DVD   on the
unit) or ENTER .
Playback starts from the selected track.
Still images, such as the menu screens,
will not be shown.
To return to PBC playback, press  
twice, then press   (or DVD 
 on the unit).
Resuming playback from the point you
stopped the disc  Resume Play
This system memorizes the point where
you stopped the disc so you can resume
playback from that point. Resume Play
is not canceled when you turn off the
system except for MP3 audio tracks,
JPEG image files and DivX video files.
stop playback.
“Resume” appears in the display.
If “Resume” does not appear, Resume
Play is not available.
2 Press   (or DVD   on the
unit).
The system starts playback from the
point you stopped the disc in step 1.
Disc
To cancel playback with PBC
functions
1 While playing a disc, press   to
Notes
You cannot perform Resume Play during
Shuffle Play or Program Play.
This function may not work properly with
some discs.
Resume Play is canceled when
 you press   when playback is stopped.
 you eject the disc.
 you change the function.
 you change the settings in the Setup
Menu.
Depending on where you stopped the disc,
the system may not resume playback from
the exact same point.
If “MULTI-DISC RESUME” is set to “ON,”
Resume Play is not canceled for DVD
VIDEO and VIDEO CD when you eject the
disc or change the function.
Tip
To play back from the beginning of the disc,
press   twice, then press   (or DVD
  on the unit).
Continued

33GB
Resuming playback of a disc that was
stopped  Multi-disc Resume
(DVD VIDEO and VIDEO CD only)
This system can store the point where
you stopped the playback of the disc
for up to 40 discs and resumes playback
when you insert the same disc again. If
you store a playback resume point for the
41st disc, the playback resume point for
the first disc will be deleted.
To activate this function, set “MULTIDISC RESUME” in “CUSTOM SETUP”
to “ON” (page 59).
Note
If “MULTI-DISC RESUME” in “CUSTOM
SETUP” is set to “ON” and you play back a
recorded disc such as DVD-R, the system may
play back other recorded disc from the same
playback resume point. To start playback from
the beginning of the disc, press   twice
and then press   (or DVD   on the
unit).
Using play mode
Creating your own program
 Program Play
You can make a program of up to 99
steps in the order you want them to be
played back.
1 Press
DISPLAY .
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly to
select
(PROGRAM), then
press ENTER .
The options for “PROGRAM” appear
on the TV screen.
3 Press  or   repeatedly
to select “SET,” then press
ENTER .
Track number
34GB
4 Press  .
The cursor moves to the track list “T”
(in this case, “01”).
5 Select the track you want to
program.
For example, select track “02.”
Press  or   repeatedly to select
“02” under “T,” then press ENTER .
Selected track
Disc
To change a programmed step:
Press  or   repeatedly to select
the programmed step number you
want to change. Then, press  .
To delete a programmed step:
Press  or   repeatedly to select
the programmed step number
you want to change. Then, press
CLEAR .
To delete all of the programmed
steps in the program list:
Press   to select “ALL CLEAR.”
Then, press ENTER .
Total time of the programmed tracks
6 To program other tracks, repeat
steps 4 to 5.
7 Press   (or DVD   on
the unit).
Program Play starts.
When the Program Play ends, you
can restart the same program by
pressing   (or DVD   on
the unit).
Continued

35GB
To cancel Program Play
Press CLEAR  or select “OFF” in
step 3. To play back the same program
again, select “ON” in step 3 and press
ENTER .
To turn off the Control Menu
Press DISPLAY  repeatedly until
the Control Menu disappears from the
TV screen.
Notes
When Program Play is activated, the
“REPEAT” setting is automatically changed
to “ON” if the current setting is “DISC” or
“TRACK.”
You cannot perform Program Play with
VIDEO CDs during PBC playback.
Tip
The Program Play is canceled and the program
list is cleared when
 you eject the disc.
 you turn off the system.
 you change the function.
Playing in random order
 Shuffle Play
You can play back the tracks on the
current disc in random order. Each time
you perform Shuffle Play, the playing
order may differ.
1 Press
DISPLAY  during
playback.
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly to
select
(SHUFFLE), then
press ENTER .
The options for “SHUFFLE” appear
on the TV screen.
3 Press  or   repeatedly to
select the setting you want.
When playing a VIDEO CD or
AUDIO CD:
TRACK: all tracks on the disc is
played back randomly.
When Program Play is activated:
ON: all tracks in the program list is
played back randomly.
36GB
When playing a DATA CD/DVD
(except for DivX video files):
ON: all MP3 audio tracks in the
selected album on the disc are
played back randomly.
When no album is selected, the first
album is played back randomly.
Shuffle Play starts.
To cancel Shuffle Play, press
CLEAR  or select “OFF” in step 3.
To turn off the Control Menu
Press DISPLAY  repeatedly until
the Control Menu disappears from the
TV screen.
Notes
Shuffle Play is canceled when
 you eject the disc.
 you turn off the system.
 you change the function.
 you perform Track/Index Search.
You cannot perform Shuffle Play with
VIDEO CDs during PBC playback.
The same song may be played back
repeatedly for MP3 audio tracks.
 Repeat Play
You can play back all the titles, tracks,
files or a single title, chapter, track or file
on a disc repeatedly.
You can select Shuffle Play and Program
Play at the same time.
Disc
4 Press ENTER .
Playing repeatedly
1 Press
DISPLAY  during
playback.
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly to
select
(REPEAT), then
press ENTER .
The options for “REPEAT” appear on
the TV screen.
3 Press  or   repeatedly to
select the setting you want.
The default setting is underlined.
When playing a DVD VIDEO or
DVD-R/DVD-RW in VR mode:
OFF: does not play back repeatedly.
DISC: repeats all the titles on the
disc.
TITLE: repeats the current title.
CHAPTER: repeats the current
chapter.
Continued

37GB
When playing a VIDEO CD or
AUDIO CD:
OFF: does not play back repeatedly.
DISC: repeats all the tracks on the
disc.
TRACK: repeats the current track.
When playing a DATA CD or DATA
DVD:
OFF: does not play back repeatedly.
DISC: repeats all the albums on the
disc.
ALBUM: repeats the current
album.
TRACK1): repeats the current track.
FILE2): repeats the current file.
MP3 audio tracks only.
DivX video files only.
1)
2)
When Program Play or Shuffle
Play is activated:
OFF: does not play back repeatedly.
ON: repeats the Program Play or
Shuffle Play.
4 Press ENTER .
Repeat Play starts.
To cancel Repeat Play, press
CLEAR  or select “OFF” in step 3.
38GB
To turn off the Control Menu
Press DISPLAY  repeatedly until
the Control Menu disappears from the
TV screen.
Notes
You can also change the Repeat Play setting
by pressing REPEAT/FM MODE 
repeatedly.
“REP” lights up in the display when Repeat
Play is set to “DISC,” “ALBUM” or “ON.”
“REP1” lights up in the display when
Repeat Play is set to “ TITLE,” “CHAPTER,”
“TRACK” or “FILE.”
Depending on the DVD VIDEO, you cannot
perform Repeat Play.
You cannot perform Repeat Play with
VIDEO CDs during PBC playback.
When playing a DATA CD/DVD which
contains MP3 audio tracks and JPEG image
files, the audio sound will not match the
image if their playing time are different.
You cannot select “TRACK” when “MODE
(MP3, JPEG)” is set to “IMAGE (JPEG)”
(page 46).
Repeat Play is canceled when
 you eject the disc.
 you turn off the system.
 you change the function.
Searching/selecting a
disc
Some DVD VIDEOs have menus to help
you enjoy the DVD VIDEOs. You can
play back DVD VIDEOs using these
menus on the TV screen.
Using DVD TOP MENU
A DVD VIDEO contains a lot of sections
of picture or music feature called “title.”
When you play back a DVD VIDEO
which contains several titles, you can
select the title you want using DVD TOP
MENU .
Using DVD MENU
Some DVD VIDEOs allow you to select
the disc contents using a menu. When
you play back these DVD VIDEOs, you
can select items such as the language for
the subtitles and the language for the
sound using DVD/USB/TUNER MENU
.
DVD/USB/TUNER MENU .
The menu appears on the TV screen.
The contents of the menu vary
depending on the disc.
2 Press ///  or the
numeric buttons  to select
the title or item you want to
play back.
Disc
Playing DVD VIDEOs using the
menu
1 Press DVD TOP MENU  or
3 Press ENTER .
Selecting “ORIGINAL” or “PLAY
LIST” on a DVD-R/-RW in VR
mode
This function is only available for DVDRs/-RWs in VR mode with a playlist
created.
1 Press
DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
Continued

39GB
2 Press  or   repeatedly to
select
(ORIGINAL/PLAY
LIST), then press ENTER .
The options for “ORIGINAL/PLAY
LIST” appear on the TV screen.
3 Press  or   repeatedly to
select the setting you want.
PLAY LIST: play back according to
the playlist created on the disc.
ORIGINAL: play back according to
the originally recorded sequence.
4 Press ENTER .
Using the on-screen display
to search for a title/chapter/
scene/track/index/album/file
1 Press
DISPLAY . (When
playing a DATA CD/DVD
with JPEG image files, press
DISPLAY  twice.)
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly to
select the search item.
Example: when you select
(CHAPTER)
“** (**)” is selected (** refers to a
number). The number in parentheses
indicates the total number of titles,
chapters, tracks, indexes, scenes,
albums or files.
Selected row
3 Press ENTER .
You can search by different information
recorded on a disc, such as title, track,
and album. Each item is assigned a
unique number on the disc, and you can
select the numbered item you want from
the Control Menu. You can also search
for a particular point using the time code
(Time Search) (DVD VIDEO and DVDR/-RW in VR mode only).
40GB
“** (**)” change to “– – (**).”
4 Press  or   repeatedly
or the numeric buttons  to
select the title, track, album, etc.
or file number.
If you make a mistake, press
CLEAR  to cancel the number.
5 Press ENTER .
The system starts playback from the
selected title, track, album, etc.
To turn off the Control Menu
Press DISPLAY  repeatedly until
the Control Menu disappears.
When the Control Menu display is turned off,
you can search for a chapter (DVD VIDEO and
DVD-R/-RW in VR mode) or track (AUDIO
CD and VIDEO CD) or file (DivX video files
in DATA CD/DVD) by pressing the numeric
buttons  and ENTER .
To search for a particular point using
the time code  Time Search
(DVD VIDEO and DVD-R/-RW in VR
mode only)
1 Press
DISPLAY .
2 Press  or   repeatedly to select
(TIME/TEXT).
“T **:**:**” (elapsed playing time of
the current title) is selected.
3 Press ENTER .
“T **:**:**” changes to “T--:--:--.”
numeric buttons , then press
ENTER .
For example, to find the scene at 2
hours, 10 minutes, and 20 seconds
after the beginning, enter “2:10:20.”
If you make a mistake, press
CLEAR  to cancel the number.
Note
Depending on the disc, you cannot perform
Time Search.
Disc
Tip
4 Input the time code using the
Searching by scene
 Picture Navigation
1 Press PICTURE NAVI 
repeatedly to select the VIEWER
format you want to search in.
CHAPTER VIEWER (DVD
VIDEO)
TITLE VIEWER (DVD VIDEO)
TRACK VIEWER (VIDEO CD or
Super VCD)
Continued

41GB
2 Press ENTER .
The first scene of the first 9 chapters,
titles or tracks appears. If there are
more than 9 chapters, titles, or tracks,
“” appears at the bottom right of
the screen.
3 Press ///  to select a
chapter, title or track, then press
ENTER .
The system starts playing from the
selected scene.
To cancel searching
Press  RETURN  or
.
DISPLAY
Note
Depending on the disc, you may not be able to
select some items.
Tip
To display the remaining chapters, titles, or
tracks, select a scene at the bottom row and
press  . To return to the previous scene,
select a scene at the top row and press  .
42GB
Playing MP3/JPEG discs
Notes
Depending on the software you use to create
the DATA CD or DATA DVD, the playback
order may differ.
The system can play back up to 200 albums,
including albums that do not contain MP3
audio tracks and JPEG image files. The
system will not play back any albums beyond
the 200th album.
The maximum number of MP3 audio tracks
or JPEG image files on an album which this
system can recognize is:
 600 when “MODE (MP3, JPEG)” is set to
“AUDIO (MP3)” or “IMAGE (JPEG).”
 300 when “MODE (MP3, JPEG)” is set to
“AUTO.”
The system can play back MP3 audio tracks
and JPEG image files. The system will play
back any data with the extension “.MP3”,
“.JPG” or “.JPEG” even if they are not in
MP3 or JPEG format. Playing this data may
generate a loud noise which could damage
your speaker system.
Selecting an MP3 audio track
or album
1 Insert a disc in the disc slot .
The system starts playing the first
album.
2 Press DVD/USB/TUNER MENU
.
The album list appears on the TV
screen.
Disc
Depending on the encoding/writing software,
recording device, or the recording media
used to record an MP3 audio track, you may
encounter problems such as cannot play
back, sound interruptions and noise.
The following discs/situations can increase
the time it takes to start playback:
 a disc recorded with a complicated tree
structure.
 a disc recorded in Multi Session.
 a disc to which data can be added (nonfinalized disc).
 when the tracks or files in another album
have just been played back.
Some CD-Rs/-RWs or DVD-Rs/-RWs/+Rs/
+RWs cannot be played back on the system
depending on the file format.
When playing a DATA CD or DATA DVD
containing both MP3 audio tracks and JPEG
image files, select “MODE (MP3, JPEG)”
from the Control Menu after the disc’s TOC
reading is complete. If you want to play back
 both MP3 audio tracks and JPEG image
files, set “MODE (MP3, JPEG)” to
“AUTO.”
 MP3 audio tracks only, set “MODE (MP3,
JPEG)” to “AUDIO (MP3).”
 JPEG image files only, set “MODE (MP3,
JPEG)” to “IMAGE (JPEG).”
The system can play back to a depth of 8
folders only.
3 Press  or   repeatedly to
select an album.
Playing an album:
Press   (or DVD   on the
unit).
The system starts playback from the
first track of the selected album.
To stop playback, press  .
Continued

43GB
Playing a track:
1 Press ENTER .
The list of MP3 audio tracks of the
selected album appears.
To return to the album list when the
track list is displayed
Press  RETURN .
To turn on or off the album list or track
list
Press DVD/USB/TUNER MENU 
repeatedly.
2 Press  or   repeatedly to
select the MP3 audio track you
want, then press ENTER .
The system starts playing the
selected MP3 audio track.
To stop playback, press  .
To display the next or previous page of
track list or album list
Press  or   repeatedly when the
track list or album list is displayed.
To play back the next album of MP3
audio tracks
You can select the next album by pressing
  repeatedly until the last track of
the current album, then press  
once. The first track of the next album
is selected. However, you cannot select
the previous album by pressing  
repeatedly. To select the previous album,
select the album from the album list.
44GB
Selecting a JPEG image file or
album
1 Insert a disc in the disc slot .
The system starts playing the first
album.
2 Press DVD/USB/TUNER MENU
.
The album list appears on the TV
screen.
3 Press  or   repeatedly to
select an album.
Playing an album:
Press   (or DVD   on the
unit).
The system starts a slide show from
the first image file of the selected
album.
To stop playback, press  .
Playing an image file:
1 Press PICTURE NAVI .
Thumbnail picture for the first 16
JPEG image files in the selected
album is displayed.
To display the next or previous page of
album list
Press  or   repeatedly when the
album list is displayed.
To display the next or previous JPEG
image file
Disc
Press  or   repeatedly during the
slide show.
To play back the next album of JPEG
image files
If there are more than 16 image
files in the selected album, the
scroll bar appears at the right.
2 Press ///  to select the
image you want to view, then
press   (or DVD   on
the unit).
The slide show starts from the
selected image file.
To stop playback, press  .
You can select the next album by pressing
  repeatedly until the last file of the
current album, then press   once.
The first file of the next album is selected.
However, you cannot select the previous
album by pressing   repeatedly. To
select the previous album, select the
album from the album list.
To turn on or off the display of album
list
Press DVD/USB/TUNER MENU 
repeatedly.
Continued

45GB
To rotate a JPEG image file
When a JPEG image file is displayed on
the TV screen, you can rotate the image
by 90 degrees.
Press  or   repeatedly while viewing
an image.
Press CLEAR  to return to the original
view.
Notes
The PICTURE NAVI  button does not
work when “MODE (MP3, JPEG)” is set to
“AUDIO (MP3).”
When you press  or   to select the next
or previous image, the image will return to
its original view even if you have rotated the
image previously.
The slide show stops when you press  or
 .
Playing MP3 audio tracks and
JPEG image files as a slide
show with sound
You can play back a slide show with
sound by first placing both JPEG image
files and MP3 audio tracks in the same
album on a DATA CD/DVD.
1 Insert a disc in the disc slot .
The system starts playing the first
album.
46GB
2 Press   to stop playback.
3 Press DISPLAY .
The Control Menu appears on the TV
screen.
4 Press  or   repeatedly to
select
(MODE (MP3,
JPEG)), then press ENTER .
The options for “MODE (MP3,
JPEG)” appear on the TV screen.
The default setting is underlined.
AUTO: Plays back both JPEG
image files and MP3 audio tracks
in the same album as a slide show
with sound.
AUDIO (MP3): Plays back MP3
audio tracks continuously.
IMAGE (JPEG): Plays back JPEG
image files as a slide show.
5 Press  or   repeatedly
to select “AUTO,” then press
ENTER .
6 Press DVD/USB/TUNER MENU
.
The album list appears on the TV
screen.
7 Press  or   repeatedly to
select the album you want, then
press   (or DVD   on
the unit).
To turn on or off the display of album
list
Press DVD/USB/TUNER MENU 
repeatedly.
To cancel slide show with sound
Select “AUDIO (MP3)” or “IMAGE
(JPEG)” in step 4.
Notes
In some cases, you cannot change the
“MODE (MP3, JPEG)” setting when “MODE
(MP3, JPEG)” has been set to
 “IMAGE (JPEG)” and the selected disc
only contains MP3 audio tracks.
 “AUDIO (MP3)” and the selected disc
only contains JPEG image files.
If there are no MP3 audio tracks in the disc,
“No audio data” appears on the TV screen
and the disc cannot be played back.
If there are no JPEG image files in the disc,
“No image data” appears on the TV screen
and the disc cannot be played back.
If you play back a large data size of MP3
audio tracks and JPEG image files at the same
time, the sound may skip.
(JPEG image files only)
1 Press
DISPLAY  repeatedly until
the Control Menu for JPEG image
files appears on the TV screen.
2 Press  or   repeatedly to select
(INTERVAL), then press
ENTER .
The options for “INTERVAL” appear
on the TV screen.
Disc
The slide show with sound starts from
the selected album.
To stop playback, press  .
Specifying the slide show speed
3 Press  or   repeatedly to select
the transition interval you want.
The default setting is underlined.
NORMAL: Sets the duration to
about 6 to 9 seconds (Images that
are 4,000,000 pixels or more will
lengthen the duration).
FAST: Sets the duration shorter
than NORMAL.
SLOW 1: Sets the duration longer
than NORMAL.
SLOW 2: Sets the duration longer
than SLOW 1.
4 Press ENTER .
The selected setting takes effect.
Note
Some JPEG image files (especially progressive
JPEG image files or JPEG image files with
3,000,000 pixels or more) may take a longer
time to display than others, which may make
the transitions seem longer than that of the
option you selected.
Continued

47GB
Selecting a transition effect for image
files in the slide show
(JPEG image files only)
1 Press
DISPLAY  repeatedly until
the Control Menu for JPEG image
files appears on the TV screen.
2 Press  or   repeatedly to select
(EFFECT), then press
ENTER .
The options for “EFFECT” appear on
the TV screen.
3 Press  or   repeatedly to select
the setting you want.
The default setting is underlined.
MODE 1: The image sweeps in
from top to bottom of the screen.
MODE 2: The image sweeps in
from left to right of the screen.
MODE 3: The image stretches out
from the center of the screen.
MODE 4: The images randomly
cycle through the effects.
MODE 5: The next image slides
over the current image.
OFF: Turns off this function.
4 Press ENTER .
The selected setting takes effect.
48GB
Enjoying DivX® video
files
About DivX Video Files
®
DivX is a video file compression
technology, developed by DivX, Inc. This
product is an official DivX Certified
product.
This system can play back files which
have the extension “.AVI” or “.DIVX” that
contain data in DivX format.
®
Notes
The system may not play back a DivX video
file when the file has been combined from
two or more DivX video files.
The system cannot play back a DivX video
file size of more than 720 (width) × 576
(height)/2GB.
Depending on the DivX video file, the picture
may be unclear or the sound may skip.
The system cannot play back some DivX
video files that are longer than 3 hours.
Playing an album of DivX video
files or a DivX video file
1 Insert a DATA CD/DVD with DivX
Playing a DivX video file:
1 Press ENTER .
The list of DivX video files of the
selected album appears.
video files in the disc slot .
Disc
The system starts playing the first
album.
2 Press DVD/USB/TUNER MENU
.
The album list appears on the TV
screen.
2 Press  or   repeatedly to
select the DivX video file you
want, then press ENTER .
The system starts playing the
selected of DivX video files.
To stop playback, press  .
To display the next or previous page of
file list or album list
3 Press  or   repeatedly to
select an album.
Playing an album:
Press   (or DVD   on the
unit).
The system starts playing the first
DivX video file of the selected album.
To stop playback, press  .
Press  or   repeatedly when the file
list or album list is displayed.
To play back the next album of DivX
video files
You can select the next album by pressing
  repeatedly until the last file of
the current album, then press  
once. The first file of the next album is
selected. However, you cannot select
the previous album by pressing  
repeatedly. To select the previous album,
select the album from the album list.
Continued

49GB
To return to the album list when the
file list is displayed
Press  RETURN .
To turn on or off the album list
Press DVD/USB/TUNER MENU 
repeatedly.
Notes
Depending on the DivX video file, the
picture may pause or be unclear. In this case,
it is recommended that you create the file
at a lower bit rate. If the sound is still noisy,
MP3 is the recommended audio format. Note
that, this system does not conform to WMA
(Windows Media Audio) format.
Due to the compression technology used for
DivX video files, it may take some time after
you press   for the picture to appear.
Depending on the DivX video file, the sound
may not match the pictures on the screen.
Tip
If the number of viewing times has been preset,
you can play back the DivX video files as many
times as the preset number. The following
occurrences are counted:
 when the system is turned off.
 when another DivX video file is played back.
Adjusting the delay
between the picture
and sound
 A/V SYNC
When the sound does not synchronize
with the pictures on the screen, you can
adjust the delay between the picture and
sound.
A/V SYNC does not work for MP3 audio
tracks and JPEG image files in DATA
CD/DVD.
1 Press
DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly to
select
(A/V SYNC), then
press ENTER .
The options for “A/V SYNC” appear
on the TV screen.
3 Press  or   repeatedly to
select the setting you want.
The default setting is underlined.
OFF: Does not adjust.
ON: Adjusts the difference between
picture and sound.
4 Press ENTER .
Note
Depending on the input stream, this function
may not be effective.
50GB
Restricting playback of
the disc
 CUSTOM PARENTAL CONTROL,
PARENTAL CONTROL
Custom Parental Control
You can set playback restrictions so
that the system will not play back
inappropriate discs.
Parental Control
You can limit the playback of some DVD
VIDEOs according to a predetermined
level such as the age of the users. When
a limited scene is played back, that scene
may be skipped or replaced with different
scenes.
The same password is used for both
Custom Parental Control and Parental
Control.
 CUSTOM PARENTAL CONTROL
You can set the same Custom Parental
Control password for up to 40 discs.
When you set the 41st-disc, the playback
restriction for the first disc is canceled.
1 Insert the disc you want to set
Disc
You can set 2 kinds of playback
restrictions for the disc you want.
Preventing playback of specific
discs
the playback restriction.
If the disc is playing, press   to
stop playback.
2 Press
DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
3 Press  or   repeatedly
to select
(PARENTAL
CONTROL), then press ENTER .
The options for “PARENTAL
CONTROL” appear on the TV screen.
4 Press  or   repeatedly
to select “ON ,” then press
ENTER .
Continued

51GB
If you have not entered a
password:
The display for registering a new
password appears.
If you make a mistake when entering
your password
Press   repeatedly to delete the
number you have entered, then re-enter
your password again.
To turn off the Custom Parental
Control function
1 Follow steps 1 through 3 of
“Preventing playback of specific
discs” (page 51).
Enter a 4-digit password using the
numeric buttons , then press
ENTER .
The display for confirming the
password appears on the TV screen.
When you have already registered
a password:
The display for entering the password
appears on the TV screen.
5 Enter or re-enter your 4-digit
password using the numeric
buttons , then press
ENTER .
“Custom parental control is set.”
appears on the TV screen and the
screen returns to the Control Menu.
52GB
2 Press  or  repeatedly to select “OFF
,” then press ENTER .
3 Enter your 4-digit password using
the numeric buttons , then press
ENTER .
To play back a disc for which Custom
Parental Control is set
1 Insert the disc for which Custom
Parental Control is set.
The “CUSTOM PARENTAL
CONTROL” display appears.
2 Enter your 4-digit password using
the numeric buttons , then press
ENTER .
The system is ready for playback.
Tip
select “PLAYER ,” then press
ENTER .
If you have not entered a
password:
The display for registering a new
password appears.
Disc
If you forget your password, enter the 6digit number “199703” using the numeric
buttons  when the “CUSTOM PARENTAL
CONTROL” display asks you for your
password, then press ENTER . The display
will ask you to enter a new 4-digit password.
3 Press  or   repeatedly to
Limiting playback for children
 PARENTAL CONTROL
(DVD VIDEO only)
You can limit the playback of some DVD
VIDEOs according to a predetermined
level such as the age of the users.
1 Press
DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly
Enter a 4-digit password using the
numeric buttons , then press
ENTER .
The display for confirming the
password appears on the TV screen.
When you have already registered
a password:
The display for entering the password
appears on the TV screen.
to select
(PARENTAL
CONTROL), then press ENTER .
The options for “PARENTAL
CONTROL” appear on the TV screen.
Continued

53GB
4 Enter or re-enter your 4-digit
password using the numeric
buttons , then press
ENTER .
The display for setting the playback
limitation level appears.
7 Press  or   repeatedly
to select “LEVEL,” then press
ENTER .
The options for “LEVEL” appear on
the TV screen.
8 Press  or   repeatedly to
select the level you want, then
press ENTER .
Parental Control setting is completed.
The lower the value, the stricter the
limitation.
To turn off the Parental Control
function, set “LEVEL” to “OFF.”
5 Press  or   repeatedly to
select “STANDARD,” then press
ENTER .
The options for “STANDARD” appear
on the TV screen.
6 Press  or   repeatedly to
select a geographic area as the
playback limitation level, then
press ENTER .
The area is selected.
When you select “OTHERS ,” enter
the area code for the geographic area
you want according to the “Parental
Control area code list” (page 112) by
using the numeric buttons .
54GB
If you make a mistake when entering
your password
Press   repeatedly to delete the
number you have entered, then re-enter
your password again.
To play back a disc for which Parental
Control is set
1 Insert the disc and press   (or
DVD   on the unit).
The display for entering your password
appears on the TV screen.
2 Enter your 4-digit password using
the numeric buttons , then press
ENTER .
The system starts playback.
Notes
Tip
If you forget your password, remove the disc
and repeat steps 1 to 3 of “Limiting playback
for children.” When you are asked to enter your
password, enter “199703” using the numeric
buttons , then press ENTER . The display
will ask you to enter a new 4-digit password.
After you enter a new 4-digit password, reinsert
the disc and press  . When the display
for entering your password appears, enter your
new password.
Changing the password
1 Press
DISPLAY  when
playback is stopped.
3 Press  or   repeatedly to
select “PASSWORD ,” then
press ENTER .
The display for entering the password
appears on the TV screen.
4 Enter your 4-digit password
using the numeric buttons ,
then press ENTER .
Disc
The Control Menu display will show different
items depending on the disc type.
When you play back DVD VIDEOs which
do not have the Parental Control function,
playback cannot be limited on this system.
Depending on the DVD VIDEO, you may
be asked to change the parental control level
while playing the disc. In this case, enter your
password, then change the level. If Resume
Play is canceled, the level returns to the
original level.
5 Enter a new 4-digit password
using the numeric buttons ,
then press ENTER .
6 To confirm your password,
re-enter it using the numeric
buttons , then press
ENTER .
If you make a mistake when entering
your password
Press   repeatedly to delete the
number you have entered, then re-enter
your password again.
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly
to select
(PARENTAL
CONTROL), then press ENTER .
The options for “PARENTAL
CONTROL” appear on the TV screen.
55GB
Using the DVD setup
menu
By using the DVD setup menu, you can
make various adjustments to items such
as picture and sound.
Note
Playback settings stored in the disc take
priority over the DVD setup menu settings.
Therefore, some of the DVD setup menu
settings may not be performed.
4 Press  or   repeatedly
to select the setup item from
the displayed list: “LANGUAGE
SETUP,” “SCREEN SETUP” or
“CUSTOM SETUP.” Then press
ENTER .
The setup item is selected.
Example: SCREEN SETUP
Selected item
1 Press
DISPLAY  when
playback is stopped.
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly to
select
(SETUP), then
press ENTER .
The options for “SETUP” appear on
the TV screen.
3 Press  or   repeatedly to
select “CUSTOM,” then press
ENTER .
Setup items
5 Press  or   repeatedly to
select the item you want, then
press ENTER .
The options for the selected item
appear on the TV screen.
Example: TV TYPE
The Setup menu appears on the TV
screen.
Options
56GB
6 Press  or   repeatedly to
select the setting you want,
then press ENTER .
The setting is selected and setup is
completed.
DVD setup menu item list
The default settings are underlined.
Setting the language  LANGUAGE
SETUP
Set various languages for the on-screen
display or sound track.
MENU*
(DVD VIDEO only) Select the language
for the DVD menu.
AUDIO*
(DVD VIDEO only) Switches the
language of the sound track.
When you select “ORIGINAL,” the
language given priority in the disc is
selected.
Disc
Selected setting
OSD
(On-Screen Display) Switches the
language of the on-screen display.
SUBTITLE*
(DVD VIDEO only) Switches the
language of the subtitle.
When you select “AUDIO FOLLOW,”
the language for the subtitles changes
according to the language you selected
for the sound track.
* When you select a language in “MENU,”
“SUBTITLE,” or “AUDIO” that is not
recorded on the DVD VIDEO, one of the
recorded language is automatically selected.
However, depending on the disc, the
language may not be selected automatically.
If you select “OTHERS ” in “MENU,”
“SUBTITLE,” and “AUDIO,” enter a
language code from the “Language code list”
(page 111) using the numeric buttons .
Continued

57GB
Setting the TV screen  SCREEN SETUP
Choose the settings according to the TV
you connected.
TV TYPE1)
(DVD VIDEO only)
16:9: Select this when you connect a
wide-screen TV or a TV with a wide
mode function.
4:3 LETTER BOX: Select this when you
connect a 4:3 screen TV. This setting
displays a wide picture with bands on the
upper and lower portions of the screen.
4:3 PAN SCAN2): Select this when you
connect a 4:3 screen TV. This setting
displays the wide picture on the entire
screen and cuts off the portions that do
not fit.
COLOR SYSTEM (VIDEO CD)
(Except for European and Russian
models) Select the output video signal
when you play back a VIDEO CD.
AUTO: Output the video signal
according to the color system of the disc,
either PAL or NTSC.
PAL: Change the video signal of an
NTSC disc and output it in PAL system.
NTSC: Change the video signal of a PAL
disc and output it in NTSC system.
58GB
SCREEN SAVER
The screen saver will help prevent your
display device from becoming damaged
(ghosting). Press   (or DVD  
on the unit) to turn off the screen saver.
ON: The screen saver image appears
when playback is stopped or paused for
15 minutes or when you play back an
AUDIO CD or MP3 audio tracks for
more than 15 minutes.
OFF: The screen saver does not appear.
BACKGROUND
Selects the background color or picture
to be displayed on the TV screen. The
background color or picture is displayed
when playback is stopped or while playing
an AUDIO CD and MP3 audio tracks.
JACKET PICTURE: The jacket picture
(still picture) appears in the background,
but only when the jacket picture is
already recorded on the disc (DVD
VIDEO, CD-EXTRA, etc.). If the disc
does not contain a jacket picture, the
“GRAPHICS” picture appears.
GRAPHICS: A preset picture stored in
the system appears in the background.
BLUE: The background color is blue.
BLACK: The background color is black.
4:3 OUTPUT3)
Change this setting to watch 4:3
aspect ratio progressive signals. If
you can change the aspect ratio on
your progressive format (525p/625p)
compatible TV, change the setting on
your TV.
FULL: Select this when you can change
the aspect ratio on your TV.
NORMAL: Select this when you cannot
change the aspect ratio on your TV.
Shows a 16:9 aspect ratio signal with
black bands on left and right sides of the
image.
Setting playback options  CUSTOM
SETUP
Set up playback related and other
settings.
Disc
16:9 aspect ratio TV
1)
The default setting varies depending on the
country or region.
16:9
4:3 LETTER BOX
4:3 PAN SCAN
Depending on the DVD VIDEO, “4:3
LETTER BOX” may be selected automatically
instead of “4:3 PAN SCAN” or vice versa.
3)
This setting is effective only when
 you set “TV TYPE” in “SCREEN SETUP”
to “16:9.”
 “P AUTO” or “P VIDEO” is selected
(page 22).
2)
PAUSE MODE
(DVD VIDEO and DVD-R/-RW in VR
mode only)
AUTO: The picture, including subjects
that move dynamically, is output with no
jitter. Normally select this position.
FRAME: The picture, including subjects
that do not move dynamically, is output
in high resolution.
TRACK SELECTION
(DVD VIDEO only) Gives priority to the
sound track which contains the highest
number of channels when you play back
a DVD VIDEO on which multiple audio
(PCM, DTS, MPEG audio, or Dolby
Digital) formats1) are recorded.
OFF: No priority given.
AUTO2): Priority given.
MULTI-DISC RESUME
(DVD VIDEO and VIDEO CD only)
ON: Stores the resume playback point in
the memory for up to 40 discs.
OFF: Does not store the resume playback
point in the memory. Playback starts at
the resume playback point only for the
current disc in the system.
Continued

59GB
AUDIO DRC3) (Dynamic Range
Compression)
(DVD VIDEO and DVD-R/-RW in VR
mode only)
OFF: No compression of dynamic range.
STANDARD: Reproduces the sound
track with the kind of dynamic range that
the recording engineer intended. Useful
for watching movies at low volume late
at night.
MAX: Narrows the dynamic range fully.
DivX
Display the registration code for this
system.
For more information, go to http://www.
divx.com on the Internet.
If each audio sound track has the same
number of channels, the system selects the
audio sound tracks in the order from PCM,
DTS, Dolby Digital, to MPEG.
2)
When you set “TRACK SELECTION” to
“AUTO,” the language may change. The
“TRACK SELECTION” setting has higher
priority than the “AUDIO” settings in
“LANGUAGE SETUP”. However, depending
on the disc, this function may not be
performed.
3)
AUDIO DRC can only be performed with
Dolby Digital sources.
1)
60GB
Tuner
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually
tuning in the station.
If “TUNED” does not appear and
the scanning does not stop, press
TUNING +/  repeatedly to tune
in the station you want.
When you tune in a station that
provides RDS services, the station
name appears on the display
(European model only).
3 Adjust the volume.
Press VOLUME +/ .
1 Press FUNCTION +/ 
repeatedly to select “TUNER FM”
or “TUNER AM” (or press TUNER/
BAND  on the unit repeatedly
to select “FM” or “AM”).
2 Press and hold TUNING +/ 
until the frequency indication
changes and then release.
Scanning stops automatically when
a station is tuned in and “TUNED”
lights up in the display. When a FM
stereo program is tuned in, “ST”
lights up in the display.
Tuner
Listening to FM or AM
To stop automatic scanning
Press  .
To change the AM tuning interval
The factory setting for AM tuning
interval is 9 kHz (or 10 kHz, for some
areas, this function is not available on the
European and Russian models).
Use buttons on the unit.
1 Press TUNER/BAND  on the unit
repeatedly to select “AM.”
2 Press /  to turn off the system.
3 Press DISPLAY  to display the clock.
4 While the clock is displayed, hold
down TUNER/BAND  and then
press /  to turn on the system.
“AM 9k Step” or “AM 10k Step”
appears in the display.
When you change the interval, all the
AM preset stations are erased.
Continued

61GB
Tips
To improve broadcast reception, adjust the
supplied antennas, or connect an external
antenna.
When an FM stereo program has static noise,
press REPEAT/FM MODE  repeatedly
until “MONO” lights up in the display. There
will be no stereo effect, but the reception will
improve.
4 Press PRESET +/  repeatedly
to select the preset number you
want.
5 Press ENTER .
“Complete!” appears in the display.
The station is stored.
6 Repeat steps 1 to 6 to store
Listening to preset radio
station
1 Tune in the desired station
(see “Listening to FM or AM”
(page 61)).
2 Press DVD/USB/TUNER MENU
.
“Memory?” flashes in the display.
3 Press ENTER .
A preset number flashes in the
display.
The stations are stored from preset
number 1.
Preset number
62GB
other stations.
You can preset up to 20 FM stations
and 10 AM stations.
The preset stations are retained for
half a day even if you unplug the
power cord or if a power failure
occurs.
7 To listen to a preset station,
press PRESET +/  repeatedly
to select the preset station you
want.
You can also press the numeric
buttons , then press ENTER  to
select a preset station.
To cancel presetting
Press DVD/USB/TUNER MENU .
Bluetooth Device
Using the Bluetooth
function
You can listen to music from your
Bluetooth mobile phone or Bluetooth
device over a wireless connection.
Bluetooth Device
This system supports Bluetooth A2DP
and AVRCP profiles. For details on
Bluetooth wireless technology, see
“Bluetooth wireless technology”
(page 113).
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
English <http://www.sony.ca/
ElectronicsSupport/>
French <http://fr.sony.ca/
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Listening to music of a
Bluetooth mobile phone or
Bluetooth device
Follow the procedure below to listen to
music from Bluetooth devices with this
system.
Pairing this system with a Bluetooth
device

Connecting to registered devices

Playing music of a Bluetooth device
For details about the operations of
the Bluetooth device, also refer to the
operation manual supplied with your
Bluetooth device.
Continued

63GB
Pairing this system with a Bluetooth
device
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
device. Once a pairing operation is
performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music of
a Bluetooth device” (page 65).
1 Place the Bluetooth device to be
connected to this system within
1 meter of the system.
When establishing a connection with
this system, select the audio profile
(A2DP, AVRCP) at the Bluetooth
device. If the Bluetooth device does
not support the AVRCP profile, you
cannot perform playback or other
operations with the system (page 63).
4 Enter the passcode.
Passcode entry may be required
depending on the type of Bluetooth
device.
When “PIN?” and a countdown
appear, enter the passcode at the
system as follows:
2 Select the Bluetooth function.
Press FUNCTION +/  repeatedly
to select “BLUETOOTH” (or press
BLUETOOTH   on the unit).
3 Operate the Bluetooth device
and perform the pairing
operation.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
When searching for this system
with the Bluetooth device, a list of
the devices found may appear in the
Bluetooth device display depending
on the type of Bluetooth device.
This system appears as
“CMT-DH5BT.”
64GB
Press the numeric buttons  (or
+/  and /  on
the unit) to enter the same passcode
that was entered at the Bluetooth
device, and then press ENTER  (or
BLUETOOTH OPR  on the unit).
Once pairing is completed and the
connection is established, the system
display changes as follows:
“Connect”  Name of the Bluetooth
device
To cancel passcode entry partway
Press  .
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
This system only supports numerical
passcodes up to 4 digits.
The pairing standby status of the system is
cancelled after about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
1 Press FUNCTION +/  repeatedly
to select “BLUETOOTH” (or press
BLUETOOTH   on the unit).
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
and hold BLUETOOTH OPR  on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
2 Press CLEAR .
“Delete?” appears.
3 Press ENTER .
“Complete!” appears and all the
pairing information is erased.
In order to connect with a Bluetooth device
after performing this operation, you must enter
the passcode again.
Playing music of a Bluetooth device
You can operate a Bluetooth device by
connecting the system and a Bluetooth
device using AVRCP. If the system is not
connected with a Bluetooth device using
AVRCP, “Not In Use” appears when you
operate the system.
1 Select the Bluetooth function.
Press FUNCTION +/  repeatedly
to select “BLUETOOTH” (or press
BLUETOOTH   on the unit).
2 Establish a connection from the
Bluetooth device.
For details about the operations of
the Bluetooth device, refer to the
operation manual supplied with your
Bluetooth device.
Once the connection is established,
the system display changes as follows:
“Connect”  Name of the Bluetooth
device
Bluetooth Device
To erase all the pairing registration
information
Note
3 Start playback.
Press   (or BLUETOOTH 
 on the unit).
Depending on the Bluetooth device,
you may need to start up the AV
software of the Bluetooth device
beforehand.
Continued

65GB
4 Adjust the volume.
Press VOLUME +/ .
To check the address of a connected
Bluetooth device
Press DISPLAY  while the Bluetooth
device name appears in the system
display.
The Bluetooth device address appears for
8 seconds.
To cancel the connection with a
Bluetooth device
Press and hold BLUETOOTH OPR 
on the unit for about 2 seconds until
“Disconnect” appears, or until the
information on the display (device name,
etc.) disappears.
Other operation
To
Pause playback
Stop playback
Select a file
Find a point in
a file
66GB
Press
 .
 .
/ .
Hold down /
.
Note
These operations may not be available for
certain Bluetooth devices. In addition, the
actual operations may differ depending on the
connected Bluetooth device.
Notes on connections with Bluetooth
devices
If you cannot connect with a paired
Bluetooth device, perform the pairing
operation between the system and the
Bluetooth device again.
Depending on the type of Bluetooth device,
you can adjust the volume using the controls
of the Bluetooth device.
When BLUETOOTH   on the unit
is pressed while connected to Bluetooth
headphones, it may take some time until
a connection is made to the system from
another Bluetooth device.
Listening to music on this
system using Bluetooth
headphones
You can listen to music played on this
system using your Bluetooth headphones
over a wireless connection.
Pairing this system with Bluetooth
headphones
Pairing is an operation where Bluetooth
devices register with each other
beforehand. Use the procedure below
to pair the system with your Bluetooth
headphones. Once a pairing operation
is performed, it does not need to be
performed again. If pairing is already
completed, proceed to “Playing music on
this system” (page 69).
1 Select a function other than the
Press FUNCTION +/  repeatedly.
2 Place the Bluetooth
headphones to be connected
to this system within 1 meter of
the system.
3 Put the Bluetooth headphones
Follow the procedure below to listen
to music on this system with Bluetooth
headphones.
Pairing this system with Bluetooth
headphones

Connecting to registered headphones

Playing music on this system
For details about the operations of the
Bluetooth headphones, also refer to the
operation manual supplied with your
Bluetooth headphones.
Bluetooth Device
Bluetooth function.
in pairing mode.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
Continued

67GB
4 Press and hold BLUETOOTH
OPR  on the unit for about 7
seconds until the BLUETOOTH
indicator  flashes.
Sound output from the speakers is
stopped.
5 Enter the passcode.
Follow the same procedure as in
step 4 of “Pairing this system with a
Bluetooth device” (page 64).
Once pairing is completed and the
connection is established, the system
display changes as follows:
“Connect”  Name of the Bluetooth
device
To cancel passcode entry partway
Press  .
Notes
“Passcode” may be called “Passkey,” “PIN
code,” “PIN number” or “Password,” etc.
depending on the device.
This system only supports numerical
passcodes up to 4 digits.
The pairing standby status of the system is
cancelled after about 30 seconds. If pairing is
not successful, redo the procedure from step
1.
While connected to a Bluetooth device, this
system cannot be detected and a connection
cannot be established from another
Bluetooth device.
Pairing may not be possible if other
Bluetooth devices are present around the
system. In this case, turn off the other
Bluetooth devices.
68GB
To erase all the pairing registration
information
1 Press FUNCTION +/  repeatedly
to select “BLUETOOTH” (or press
BLUETOOTH   on the unit).
When the system is connected with a
Bluetooth device (when the Bluetooth
device name or other information
appears in the system display), press
and hold BLUETOOTH OPR  on
the unit for about 2 seconds to put the
system in Bluetooth standby mode.
2 Press CLEAR .
“Delete?” appears.
3 Press ENTER .
“Complete!” appears and all the
pairing information is erased.
Note
To connect with Bluetooth headphones after
performing this operation, you must enter the
passcode again.
Playing music on this system
You can operate this system from
Bluetooth headphones by connecting the
system and Bluetooth headphones using
AVRCP.
1 Select a function other than the
Bluetooth function.
Press FUNCTION +/  repeatedly.
2 Establish a connection with the
Bluetooth headphones.
the function selected in step 1.
Depending on the type of Bluetooth
headphones, you can operate this
system (playback, volume control,
etc.) using the headphone’s controls.
For details about the operations of the
Bluetooth headphones, refer to the
operation manual supplied with your
Bluetooth headphones.
4 Adjust the volume.
Press VOLUME +/ .
To cancel the connection with
Bluetooth headphones
Press and hold BLUETOOTH OPR 
on the unit for about 2 seconds until the
BLUETOOTH indicator  turns off.
Notes
If you cannot connect with paired Bluetooth
headphones, perform the pairing operation
between the system and the Bluetooth
headphones again.
When the system is changed to a function
other than the Bluetooth function and
BLUETOOTH OPR  on the unit is pressed
while connected to a Bluetooth device, it may
take some time until a connection is made
with the Bluetooth headphones.
This system stores separate volume settings
for when listening through the speakers
or PHONES jack  on the unit, or when
listening through Bluetooth headphones.
Bluetooth Device
Press and hold BLUETOOTH OPR
 on the unit for about 2 seconds
until the BLUETOOTH indicator 
lights up, then release the button.
If more than one Bluetooth device
that has been connected in the past
is present around the system, the
system attempts to connect with up
to 3 most recently connected devices.
(Connection is attempted with up
to 3 devices in order from the most
recently connected device, and the
attempts end when a connection is
established.)
Once the connection is established,
the system display changes as follows:
“Connect”  Name of the Bluetooth
device
3 Start playback of the music for
69GB
USB Device
2 Connect an optional USB device
(Digital music player or USB
storage media) to the (USB)
port  as shown below.
Listening to music of
an USB device
You can connect an optional USB device
(Digital music player or USB storage
media) to the
(USB) port  on the
unit and listen to music stored in the
USB device. See “Playable USB devices
and Bluetooth devices” (page 115) for a
list of USB devices that can be connected
to this system.
The audio formats that can be played
back by this system are as follows:
ATRAC/MP3*/WMA*/AAC*
* Files with copyright protection (Digital
Rights Management) cannot be played by
this system.
Files downloaded from an online music store
may not be played by this system.
1 Select the USB function.
Press FUNCTION +/  repeatedly
to select “USB”.
USB device (Digital
music player or USB
storage media)
When USB cable connection is necessary,
connect the USB cable supplied with the
USB device to be connected.
See the operation manual supplied with
the USB device to be connected for
details on the operation method.
When the USB device is connected, the
display changes as follows:
“Reading”  “ATRAC AD1)” or
“StorageDrive2)”
When connecting a digital music player.
When connecting USB storage media. The
volume label is displayed next if recorded.
1)
2)
Note
It may take about 10 seconds before “Reading”
appears depending on the type of USB device
connected.
70GB
3 Start playback.
Press   (or USB   on the
unit).
4 Adjust the volume.
Press VOLUME +/ .
Other operation
Select a track / .
Find a point in Hold down /
 during playback,
a track
and release the button
at the desired point.
Select Repeat REPEAT/FM MODE
 repeatedly until
Play
“REP” or “REP1”
appears.
Hold down   until
“No Device” appears,
then remove the USB
device.
View the
USB device
information*
DISPLAY 
repeatedly.
* For example, you can view the USB device
information such as the track number or
album name during normal play, or the total
playing time while the player is stopped.
To change the play mode
1 Press DVD/USB/TUNER MENU 
while the USB device is stopped.
“Play Mode?” appears in the display.
2 Press ENTER .
3 Press  or   repeatedly to select
the play mode.
You can select the following play
modes:
Continue (Normal Play):
Plays back the audio tracks on the
USB device in original order.
AlbmContinue:
Plays back the audio tracks in the
selected album on the USB device.
Shuffle:
Plays back the audio tracks on the
USB device in random order.
Continued

USB Device
To
Press
Stop playback  .
Pause playback  . Press   again
or   (or USB
  on the unit) to
resume playback.
Select an album
+/ .
Remove the
USB device
71GB
Albm Shuffle:
Plays back the audio tracks in the
selected album on the USB device
in random order.
Program:
Plays back the audio tracks on the
USB device in the order you want
them to be played.
Notes on the USB device
Do not connect the system and the USB
device through a USB hub.
With some connected USB devices, after an
operation is performed, there may be a delay
before it is performed by this system.
This system does not necessarily support all
the functions provided in a connected USB
device.
The playback order for the system may differ
from the playback order of the connected
USB device.
Always hold down   and make sure that
“No Device” appears before removing the
USB device. Removing the USB device while
“No Device” is not displayed may corrupt the
data on it or damage the USB device itself.
Do not save other types of files or
unnecessary folders on an USB device that
has audio files.
Folders that have no audio files are skipped.
Files are played back in the order that they
are transferred to the USB device.
72GB
The maximum numbers of albums and tracks
that can be contained on a single USB device
are as follows:
 Digital music player: 65,535 groups
(maximum 999 tracks per group)
 USB storage media: 999 files
The maximum number of tracks and album
may vary depending on the file and folder
structure.
The audio formats that you can listen to with
this system are as follows:
 MP3: file extension “.mp3”
 Windows Media Audio file: file extension
“.wma”
 AAC: file extension “.m4a”
Note that even when file names have the
above file extensions, if the actual file differs,
the system may produce noise or may
malfunction.
Compatibility with all encoding/writing
softwares, recording devices, and recording
media cannot be guaranteed. Incompatible
USB device may produce noise or interrupted
audio or may not play at all.
Notes on the display information
Characters that cannot be displayed appear
as “_.”
The following are not displayed:
 total playing time for a CD-DA disc
depending on the play mode.
 total playing time and remaining playing
time for an MP3 disc and USB device.
The following are not displayed correctly:
 folder and file names that do not follow
either the ISO 9660 Level 1, Level 2 or
Joliet in the expansion format.
The following are displayed:
 ID3 tag information for MP3 files when
ID3 version 1 and version 2 tags are used
(up to 62 characters for an MP3 disc).
 ID3 tag information for “ATRAC” files
when ID3 version 2 tags are used.
Creating your own
program with the USB
device
 Program Play
1 Select the USB function.
Press FUNCTION +/  repeatedly
to select “USB”.
2 Press DVD/USB/TUNER MENU
 while the USB device is
stopped.
“Play Mode?” appears in the display.
select “Program,” then press
ENTER .
Continued

USB Device
3 Press ENTER .
4 Press  or   repeatedly to
73GB
5 Press /  repeatedly
until the desired track number
appears.
When programming tracks, press
+/  repeatedly to select the
desired album, and then select the
desired track.
Example: When programming tracks
on a USB device
8 To play your program of tracks,
press   (or USB   on
the unit).
The program remains available until
you remove the USB device. To play
the same program again, press  
(or USB   on the unit).
To cancel Program Play
Select the play mode other than
“Program” in step 4.
To delete the last track of the program
Selected track number
6 Press ENTER  to add the track
to the program.
The total program time cannot be
displayed, so “ . ” appears.
7 Repeat steps 5 through 6 to
program additional tracks, up to
a total of 25 tracks.
74GB
Press CLEAR  while the USB device
is stopped.
Sound Adjustment
Singing along: Karaoke
Adjusting the sound
Generating a more dynamic
sound (Dynamic Sound
Generator X-tra)
You can reinforce the bass and create a
more powerful sound.
The DSGX setting is ideal for music
sources.
Press DSGX  on the unit
repeatedly.
Tip
The default setting is “DSGX ON.”
Setting the sound effect
1 Press EQ  repeatedly to select
“BASS” or “TREBLE.”
2 Press PRESET +/  repeatedly
Preparing for karaoke
(DVD VIDEO, DVD-R/-RW in VR
mode, VIDEO CD, AUDIO CD, MP3
audio tracks and DivX video files only)
1 Press FUNCTION +/ 
repeatedly to select “DVD” (or
press DVD   on the unit).
2 Turn MIC LEVEL  on the
unit to “MIN” to reduce the
microphone volume and turn
ECHO LEVEL * on the unit to
“MIN” to cancel the echo effect.
Sound Adjustment
Each time you press the button, the
display changes as follows:
DSGX ON  DSGX OFF
You can sing along with any multiplex
AUDIO CD, multiplex VIDEO CD or
DVD VIDEO in Dolby Digital Karaoke
format.
3 Connect an optional
microphone to MIC jack  on
the unit.
to adjust the level.
Continued

75GB
4 Press KARAOKE MODE .
“KARAOKE MODE: ON” appears on
the TV screen.
5 Start playing the music and
adjust the volume.
DVD VIDEO, DVD-R/-RW in VR
mode or DivX video files:
The system outputs the audio format
that you have selected.
AUDIO CD, VIDEO CD or MP3
audio tracks:
The audio setting automatically
changes to “1/L” and the system
outputs the left channel audio on both
front and surround channels.
If you want to hear vocal:
Press AUDIO  repeatedly to select
another audio channel.
6 Start singing along with the
music.
76GB
Other operations
To
Adjust the
microphone
volume
Adjust the
microphone
echo
Cancel the echo
effect
Turn
MIC LEVEL  on the
unit.
ECHO LEVEL * on
the unit.
ECHO LEVEL * on
the unit to “MIN.”
* Except for European and Russian models.
To turn off the Karaoke Mode
Disconnect the microphone or press
KARAOKE MODE . “KARAOKE
MODE: OFF” appears on the TV screen.
Notes
You cannot activate karaoke mode in step 4
when the QUICK SETUP guide message is
displayed on the TV screen.
Karaoke Mode is automatically turned off
when you:
 turn off the system.
 change the function.
 connect the headphones.
Dolby Digital Karaoke format
(DVD VIDEO only)
The Dolby Digital format, which
reproduces surround sound using
5 channels, can also contain the
“Dolby Digital Karaoke” format
which is specialized for karaoke. In
the Dolby Digital Karaoke format
discs, guide melody and guide vocal
tracks are recorded in addition to the
accompaniment. You can select them
when Karaoke Mode is turned on.
Speaker output in normal Dolby
Digital format (5.1 channel)
Center
Front (L)
Example:
2/0: Recorded only with accompaniment.
3/0: Recorded with guide melody.
3/1: Recorded with guide melody and one guide vocal.
3/2: Recorded with guide melody and two guide vocals.
Front (R)
Surround (R)
Sound Adjustment
Surround (L)
You can check the audio information by
pressing AUDIO  (page 31). When
playing a Dolby Digital Karaoke disc,
“” appears at the current audio format
(page 86).
Speaker output in Dolby Digital
Karaoke format
Accompaniment
Accompaniment
Front (L)
Center
Front (R)
Guide melody
Surround (L)
Surround (R)
Guide vocal 1
Guide vocal 2
You can select any of these.
Continued

77GB
Enjoying karaoke using the
control menu
1 Press
DISPLAY  once or
twice when Karaoke Mode is
turned on while playing a disc.
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly to
select the Karaoke item from the
displayed list, then press ENTER
.
The Karaoke item is selected.
3 Press  or   repeatedly to
select the setting you want,
then press ENTER .
78GB
Setting Karaoke Mode
The default settings are underlined.
KARAOKE PON1)
ON: Enjoy karaoke with any disc, even
if it is not a karaoke or multiplex disc by
reducing the sound of the vocal.
OFF: Cancel the “KARAOKE PON”
effect.
KEY CONTROL2)
Adjust the pitch of the music to suit your
vocal range.
Select “” to cancel the “KEY
CONTROL” effect.
VOCAL SELECT3)
(DVD VIDEO, VIDEO CD, AUDIO CD
only)
When playing a DVD VIDEO:
OFF (Turn off the Guide vocal)

1+2 (Guide vocal 1+2)

1 (Guide vocal 1)

2 (Guide vocal 2)
When playing a VIDEO CD or AUDIO
CD:
OFF (Turn off the vocal)

L+R (The same sound is output
from both speakers)

STEREO (The standard stereo
sound)
SCORE MODE5)
When Karaoke Mode is turned on, you
can select this.
Your score is calculated by comparing
your voice with the music source.
NORMAL: Advance or professional level.
EASY: Beginner or intermediate level.
DEMO: Demonstration mode.
Consistently displays a high score for
every song.
1 Press SCORE  before singing a
song in Karaoke Mode.
The previous highest score appears on
the TV screen.
2 After singing for more than a minute,
press SCORE  again to view your
score.
Your score is calculated from a scale
of 0 to 99.
Continued

Sound Adjustment
When playing a Super VCD:
OFF (Turn off the vocal)

1:L+R

1:STEREO (The stereo sound of
the audio track 1)

2:L+R

2:STEREO (The stereo sound of
the audio track 2)
GUIDE MELODY4)
(DVD VIDEO only)
ON: Turn on the guide melody.
OFF: Turn off the guide melody.
79GB
The singer’s voice may not be reduced when:
 only a few instruments are playing.
 a duet is being played back.
 the source has strong echoes or chorus.
 the singer’s voice deviates from the center.
 the voice on the source is singing in high
soprano or tenor.
You can also change the “KARAOKE PON”
setting by pressing KARAOKE PON 
when the Karaoke Mode is turned on.
The “KARAOKE PON” setting is
automatically changed to “OFF” when you
set “VOCAL” to “ON.”
2)
You can also change the “KEY CONTROL”
setting by pressing KEY CONTROL   to
reduce the key and KEY CONTROL   to
increase the key when the Karaoke Mode is
turned on.
The “KEY CONTROL” setting is
automatically changed to default setting
when you change the track or title.
Depending on the disc, you may not be able
to do the above operation.
3)
The “VOCAL” setting is automatically
changed to “OFF” when you set “KARAOKE
PON” to “ON.”
For DVD VIDEOs without guide vocal, you
cannot turn on the vocal. When playing a
DVD VIDEO, the function only works for
Dolby Digital Karaoke format. For DVD
VIDEOs with 1 guide vocal recorded, you
cannot change the vocal.
Depending on the disc, you may not be able
to change the vocal.
1)
80GB
When playing a DVD VIDEO, the function
only works for Dolby Digital Karaoke format.
For DVD VIDEOs without guide melody,
you cannot hear the guide melody even if you
set the setting to “ON.”
5)
The highest score is reset when the system is
turned off.
If you press other buttons on the remote, the
score calculating function may be canceled.
In some cases, you may not be able to use the
scoring mode.
4)
Note
Each Karaoke setting in the table above is
automatically changed to “OFF” or to the
default setting when you:
 turn off the system.
 change the function.
 connect the headphones.
 turn off the Karaoke Mode.
 eject the disc.
Other Operations
Using the timer
Falling asleep to music
 Sleep Timer
You can set the system to turn off after a
certain time, so that you can fall asleep
to music.
Press SLEEP  repeatedly.
Each time you press the button, the
minute display changes cyclically as
follows:
90min  80min  70min  … 
10min  OFF
Other operations
Cancel the
Sleep Timer
Do this
Press SLEEP  once.
Press SLEEP 
repeatedly to select the
time you want.
Press SLEEP 
repeatedly until “SLEEP
OFF” appears in the
display.
 Play Timer
You can wake up to CD, tuner or optional
USB device at a preset time. Make sure
you have set the clock (see “Setting the
clock” (page 24)).
1 Prepare the sound source.
Disc: Insert a disc.
Radio: Tune in the preset station
you want (see “Listening to the
radio” (page 61)).
USB device: Connect an optional
USB device (page 70).
2 Press VOLUME +/  to adjust
the volume.
3 Press TIMER MENU .
4 Press  or   repeatedly to
select “PLAY SET?,” then press
ENTER .
“ON” appears and the hour indication
flashes in the display.
5 Set the time to start playback.
Press  or   repeatedly to set the
hour, then press ENTER .
The minute indication flashes in the
display. Use the procedure above to
set the minute. “OFF” appears and the
hour indication flashes in the display.
Continued

Other Operations
To
Check the
remaining time
Change the
time to turn off
Waking up to music
81GB
6 Set the time to stop playback
using the same procedure as
step 5.
7 Select the sound source.
Press  or   repeatedly until the
music source you want appears in the
display, then press ENTER . This
display will show the timer settings.
8 Press   to turn off the
system.
Other operations
To
Check the
setting
Do this
1 Press TIMER
MENU .
“TIMER SEL?”
flashes in the display.
2 Press ENTER .
3 Press  or  
repeatedly to select
“PLAY SELECT?,”
then press
ENTER .
Start from step 1.
Change the
setting
Cancel the Play 1 Press TIMER
Timer
MENU .
“TIMER SEL?”
flashes in the display.
2 Press ENTER .
3 Press  or  
repeatedly to select
“TIMER OFF?,” then
press ENTER .
82GB
Notes
The Play Timer will not be activated if the
system is turned on or if “STANDBY” flashes
in the display.
The system turns on 30 seconds before the
preset time.
Before the system is turned off, if a
connection is made with the Bluetooth
headphones, sounds played by the Play Timer
may be output to the Bluetooth headphones.
Changing the display
Checking the clock
Press DISPLAY  when the system
is turned off. The clock is displayed
for 8 seconds.
Viewing information
about the disc
Viewing information about the
disc in the front panel display
Press DISPLAY .
Adjusting the brightness of the
display
Each time you press DISPLAY , the
display changes from     
…
 Disc information
 Clock display (for 8 seconds)
Press DIMMER  repeatedly while
the system is on.
Checking the elapsed playing time,
remaining time and titles
* DIMMER 2 is the darkest.
Press TIME/TEXT  during playback.
Each time you press TIME/TEXT , the
display changes from     … 
…
When playing a DVD VIDEO or DVDR/-RW in VR mode:
When the menu or the title without a
chapter is played back
 Elapsed playing time of the menu
or the current title
 Title of the disc1)
Continued

Other Operations
Each time you press the button, the
display changes cyclically as follows:
DIMMER OFF  DIMMER 1 
DIMMER 2*
83GB
When a chapter other than above
condition is played back
 Elapsed playing time of the current
title
 Remaining time of the current title
 Elapsed playing time of the current
chapter
 Remaining time of the current
chapter
 Title of the disc1)2)
When playing an AUDIO CD or VIDEO
CD without PBC function:
 Elapsed playing time of the current
track
 Remaining time of the current track
 Elapsed playing time of the current
disc3)
 Remaining time of the current disc3)
 Title of the disc1)4)
When playing a VIDEO CD/Super
VCD:
 Elapsed playing time of the current
scene/track
 Title of the disc1)4)
When playing MP3 audio tracks on a
DATA CD/DVD or DivX video files on a
DATA CD/DVD:
 Elapsed playing time of the current
track/file
 Title of the track and file5)
84GB
Checking the total playing time and
titles
Press TIME/TEXT  repeatedly when
playback is stopped.
Each time you press TIME/TEXT ,
the display changes from    
…
DVD VIDEO or DVD-R/-RW in VR
mode:
 Total number of titles on the disc
 Title of the disc1)
VIDEO CD without PBC playback or
AUDIO CD:
 Total number of the tracks on the disc
and the total playing time of the disc
 Title of the disc1)
VIDEO CD with PBC playback:
 Total number of scenes on the disc
 Title of the disc1)
“NO TEXT” appears in the display if the
DVD VIDEO is not a DVD-TEXT disc or the
VIDEO CD does not have text information.
2)
The current chapter number and the current
title number are displayed for 2 seconds
before the display returns to elapsed playing
time when you press TIME/TEXT  during
display of title of the disc.
3)
When Program Play or Shuffle Play is
turned on, the elapsed playing time and the
remaining time of the disc would be skipped.
1)
The current track number and the current
index number (for a disc without PBC) or the
current scene number (for a disc with PBC)
are displayed for 2 seconds before the display
returns to elapsed playing time when you
press TIME/TEXT  during display of the
title of disc.
5)
When playing DivX video files, the current
album number and the current file number
are displayed for 2 seconds before the display
returns to elapsed playing time when you
press TIME/TEXT  during display of title
of the file.
4)
Notes
Press TIME/TEXT .
Each time you press TIME/TEXT 
while playing the disc, the display
changes from     …  
…
The time display that you can view on the
TV screen depends on the disc you are
playing.
T: title or track
C: chapter
D: disc
Bit rate
Time information
Album Title
Disc/track/file title
When playing a DVD VIDEO or DVDR/-RW in VR mode:
 Elapsed playing time of the current
title
 Remaining time of the current title
 Elapsed playing time of the current
chapter
 Remaining time of the current chapter
 Title of the disc
Continued

Other Operations
If you play back a disc containing JPEG
image files only, “JPEG” or “No Audio”
appears in the display.
You cannot use TIME/TEXT  to change
the display of disc information when:
 a JPEG image file is played back.
 playback is stopped for DATA CD/DVD
with MP3 audio tracks and/or JPEG
image files.
 playback is stopped for DATA CD/DVD
with DivX video files.
If the MP3 audio track title contains
characters which cannot be displayed, these
characters will be displayed as “*.”
The elapsed playing time of MP3 audio tracks
and DivX video files may not be displayed
correctly.
Viewing information about the
disc in the on-screen display
85GB
When playing a VIDEO CD/Super
VCD:
 Elapsed playing time of the current
scene/track
 Title of the disc
When playing a DVD VIDEO:
For example, in Dolby Digital format,
multiple signals ranging from monaural
to 5.1 channel signals can be recorded on
a DVD VIDEO.
When playing an AUDIO CD or VIDEO
CD without PBC function:
 Elapsed playing time of the current
track
 Remaining time of the current track
 Elapsed playing time of the current
disc
 Remaining time of the current disc
 Title of the disc
Example:
For Dolby Digital 5.1 channel:
When playing a DATA CD/DVD:
Elapsed playing time of the current
track/file
Notes
Only alphabet letters, numbers and some
symbols can be displayed.
Depending on the disc, the system can only
display a limited number of characters.
For MP3 audio tracks with format other than
ISO 9660 Level 1 and Level 2, album title and
track title may not be displayed.
Displaying the audio information of
the disc
(DVD VIDEO and DivX video files only)
When you press AUDIO  repeatedly
during playback, the format of the
current audio signal is displayed on the
TV screen.
86GB
2 Surround components
2 Front components +
1 Center component
1 LFE (Low Frequency
Effect) component
When playing a DivX video file:
Example:
MP3 audio track
Bit rate
Checking the date information
of JPEG image files
You can check the date information
during playback when Exif* tag is
recorded in the JPEG image files.
Press DISPLAY  repeatedly
during playback.
The Control Menu appears.
Hooking up optional
components
To enhance your system, you can connect
optional components. Refer to the
operating instructions provided with
each component.
Front panel
Date information
Note
Other Operations
* “Exchangeable Image File Format” is a
digital camera image format defined by the
Japan Electronics & Information Technology
Industries Association (JEITA).
Rear panel
The date information format varies depending
on the area.
Continued

87GB
AUDIO IN jack
Connect the audio output jack of an
optional component (portable audio
player, etc.).
COMPONENT VIDEO OUT jacks
Connect the component video input
jacks of the TV or projector. If your
TV accept progressive format signals,
you must use this connection and
press PROGRESSIVE  on the unit
repeatedly to select “P AUTO” or “P
VIDEO.” You can enjoy higher quality
video images.
S VIDEO OUT/VIDEO OUT jacks
Connect the S Video/video input
jack of the TV. You can enjoy higher
quality video images when you select
the S VIDEO.
DIGITAL OUT jack
Connect the digital optical input jack
of an optional digital component
(such as amplifier). You can enjoy
5.1 channel sound, if the connected
amplifier equipped with Dolby Digital
or DTS decoder.
Note
Sound is output only when the system
function is set to “DVD.”
88GB
Enjoying the multi channel
sound with the optional
amplifier
1 Connect the digital optical cord.
See “Hooking up optional
components” (page 87).
2 Connect the speakers to an
optional amplifier equipped
with a decoder.
For the speakers placement, refer to
the operating instructions supplied
with the connected amplifier.
3 Start playing a multi channel
source, such as a DVD VIDEO.
4 Select the audio format you
want.
See “Changing the sound” (page 31).
Additional Information
Troubleshooting
Should you encounter a problem with
your system, do the following:
1 Make sure the power cord and
speaker cords are connected
correctly and firmly.
2 Find your problem in the
troubleshooting checklist below and
take the indicated corrective action.
If the problem persists after doing all
of the above, consult your nearest Sony
dealer.
If the STANDBY indicator flashes
The clock or timer setting is canceled.
The power cord is disconnected or a
power failure occurred. Redo “Setting
the clock” (page 24). If you have set
the timer, redo “Waking up to music”
(page 81).
“– –:– –” appears in the display.
A power failure has occurred. Set the
clock (page 24) and timer settings
(page 81) again.
There is no sound.
Press VOLUME +  repeatedly.
The headphones are connected to the
PHONES jack .
Check the speaker connections
(page 19).
The system is in pause mode, in Slowmotion Play or in Lock Search. Press
  (or DVD   on the unit) to
start the playback.
Additional Information
Immediately unplug the power cord,
and check the following items.
If your system has a voltage
selector, is the voltage selector set
to the correct voltage?
Are you using only the supplied
speakers?
Is anything blocking the ventilation
holes on the rear of the system?
General
After the STANDBY indicator 
stops flashing, reconnect the power
cord, and turn on the system. If the
issue persists, contact your nearest
Sony dealer.
Continued

89GB
If the BLUETOOTH indicator  is lit
or flashing when a function other than
the Bluetooth function is selected, no
sound is heard through the speakers
or PHONES jack . Press and hold
BLUETOOTH OPR  for about
2 seconds until the BLUETOOTH
indicator  turns off.
There is no microphone sound.
Press VOLUME +  repeatedly or
turn MIC LEVEL  on the unit
clockwise to adjust the microphone
volume.
Make sure the microphone is
connected to the MIC jack 
correctly.
There is severe hum or noise.
A TV or VCR is placed too close to the
unit. Move the unit away from the TV
or VCR.
Move the unit away from the source of
noise.
Connect the unit to a different wall
outlet.
Install a noise filter (commercially
available) to the power cord.
The timer does not function.
Check the timer setting and set the
correct time (page 81).
Cancel the Sleep Timer function
(page 81).
90GB
The remote does not function.
Remove the obstacles between the
remote and the unit.
Move the remote closer to the unit.
Point the remote at the unit’s sensor.
Replace the batteries (R6/size AA).
Locate the unit away from the
fluorescent light.
There is acoustic feedback.
Reduce the volume.
Move the microphone away from the
speakers or change the direction of the
microphone.
The color irregularity on a TV screen
persists.
Turn off the TV set once, then turn it
on after 15 to 30 minutes. If the color
irregularity still persists, place the
speakers farther away from the TV set.
THEATRE SYNC function does not
work.
If distance between the TV and this
unit is too far, this function may not
work. Install the unit near the TV.
Speakers
Sound comes from one channel or
unbalanced left and right volume.
Place the speakers as symmetrically as
possible.
Check that the speakers are connected
securely and correctly.
The source being played back is
monaural.
Disc Player
The disc does not eject.
Consult your nearest Sony dealer.
Playback does not start from the first
track.
The system is in Program Play or
Shuffle Play mode. Turn off Program
Play and Shuffle Play.
Resume Play has been selected. Press
  twice. Then, press   (or
DVD   on the unit) to start
playback (page 33).
The title of DVD VIDEO or PBC
menu automatically appears on the TV
screen.
Playback starts automatically.
The DVD VIDEO features an auto
playback function.
Playback stops automatically.
Some discs may contain an auto pause
signal. While playing such a disc, the
playback stops at auto pause signal.
Continued

Additional Information
Playback does not start.
Check whether a disc is loaded.
Wipe the disc clean (page 102).
Reinsert the disc.
Insert the disc that this system can play
back (page 7).
Insert the disc in the disc slot  with
the label side facing up.
Remove the disc and wipe away the
moisture on the disc, then leave the
system turned on for a few hours until
the moisture evaporates.
Press   (or DVD   on the
unit) to start playback.
The region code on the DVD VIDEO
does not match the system.
Cancel the Custom Parental Control
function (page 52).
The sound skips.
Wipe the disc clean (page 102).
Reinsert the disc.
Move the unit to a place without
vibration (e.g., on top of a stable
stand).
Move the speakers away from the
unit, or place them on separate stands.
When you listen to a track with bass
sounds at high volume, the speaker
vibration may cause the sound to skip.
91GB
You cannot perform some functions
such as Stop, Lock Search, Slowmotion Play, Repeat Play, Shuffle Play
or Program Play.
Depending on the disc, you may not
be able to do some of the operations
above. Refer to the operating
instructions supplied with the disc.
The DATA CD (MP3 audio track/JPEG
image file/DivX video file) cannot be
played back.
The DATA CD is not recorded in a
format that conforms to ISO 9660
Level 1, Level 2, or Joliet (expansion
format).
The DATA DVD is not recorded
in a format that conforms to UDF
(Universal Disk Format).
The MP3 audio track does not have the
extension “.MP3”.
The data is not stored in the desired
format.
The MP3 audio tracks in format other
than MPEG 1 Audio Layer 3 cannot be
played back.
The system can playback to a depth of
8 folders only.
For MP3/JPEG files, check the “MODE
(MP3, JPEG)” setting (page 42).
The disc contains more than 200
albums.
The album contains more than 600
tracks/files.
92GB
For MP3/JPEG files, the album
contains more than 300 tracks/files
when the “MODE (MP3, JPEG)” is set
to “AUTO.”
For MP3/JPEG files, the DATA CD/
DVD contains a DivX video file.
The JPEG image file does not have the
extension “.JPG” or “.JPEG”.
The JPEG image file is larger than
3,072 (width) × 2,048 (height) in
normal mode, or more than 2,000,000
pixels in Progressive JPEG mode which
is mainly used on the Internet website.
JPEG image files with a high width to
length ratio cannot be played back.
The DivX video file does not have the
extension “.AVI” or “.DIVX”.
DivX video files with a high width to
length ratio cannot be played back.
The MP3 audio tracks take longer
time to play back than others.
After the system reads all the tracks on
the disc, playback may take more time
than usual if:
 the number of albums or tracks on
the disc is very large.
 the album and track organization
structure is very complex.
The disc title, album title, track title
and DVD-TEXT characters do not
appear properly.
Use a disc that conforms to the
ISO 9660 Level 1, Level 2, or Joliet
(expansion).
The character code that can be
displayed by this system are as follows:
 Upper cases (A to Z)
 Lower cases (a to z)
 Numbers (0 to 9)
 Symbols (< > * +,  / [ ] _)
Other characters may not be displayed
correctly.
The surround effect is difficult to hear
when you are playing a Dolby Digital
or MPEG audio sound track.
Check the speaker connections
(page 19).
Depending on the DVD VIDEO, the
output signal may not be the entire 5.1
channel. It may be monaural or stereo,
even if the sound track is recorded in
Dolby Digital or MPEG audio format.
Pairing cannot be done.
Move the Bluetooth device closer to
the system.
Pairing may not be possible if other
Bluetooth devices are present around
the system. In this case, turn off the
other Bluetooth devices.
Connection is not possible.
The Bluetooth device you attempted
to connect does not support the A2DP
and AVRCP profiles, and cannot be
connected with the system.
Enable the Bluetooth function of the
Bluetooth device.
The pairing registration information
has been erased. Perform the pairing
operation again.
While connected to a Bluetooth device,
this system cannot be detected and a
connection cannot be established from
another Bluetooth device.
The sound skips or fluctuates, or the
connection is lost.
The system and the Bluetooth device
are too far apart.
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Continued

Additional Information
The sound loses stereo effect when
you play back an AUDIO CD, VIDEO
CD, MP3 audio track, DivX video file
or DVD VIDEO.
Make sure the system is connected
properly.
Unplug the microphone or press
KARAOKE MODE  repeatedly until
“KARAOKE MODE: OFF” appears on
the TV screen.
Bluetooth device
93GB
The sound of your Bluetooth device
cannot be heard on this system.
Turn up the volume on your Bluetooth
device first, and then adjust the volume
using VOLUME +/ .
Severe hum or noise
If there are obstacles between the
system and your Bluetooth device,
remove or avoid the obstacles.
If there is equipment that generates
electromagnetic radiation, such as a
wireless LAN, other Bluetooth device,
or a microwave oven nearby, move
them away.
Turn down the volume of the
connected Bluetooth device.
The sound from the Bluetooth
headphones is distorted.
Turn down the volume of the system
using VOLUME  . If your
headphones have a volume control,
also adjust the volume using the
headphone’s volume control.
Press DSGX  on the unit repeatedly
until “DSGX OFF” appears.
Press EQ  repeatedly to select
“BASS” or “TREBLE,” and then press
PRESET   repeatedly to turn down
the level.
USB device
Are you using a supported USB
device?
If you connect an unsupported USB
device, the following problems may
occur. See “Playable USB devices and
Bluetooth devices” (page 115) for the
supported device types.
The USB device is not recognized.
File or folder names are not
displayed on this system.
Playback is not possible.
The sound skips.
There is noise.
“Over Current” appears.
A problem has been detected with the
level of electrical current from the
(USB) port . Turn off the system and
remove the USB device from the
(USB) port . Make sure there is no
problem with the USB device. If this
display pattern persists, contact your
nearest Sony dealer.
There is no sound.
The USB device is not connected
correctly. Turn off the system, then
reconnect the USB device and check if
“USB MEMORY” appears.
The sound is distorted.
The bit rate used when encoding the
files was low. Send files encoded with
higher bit rates to the USB device.
94GB
There is noise or the sound skips.
Turn off the system, then reconnect the
USB device.
The music data itself contains noise.
Noise may have been introduced
when creating music data due to the
conditions of the computer. Create the
music data again.
When using the USB storage media,
copy the files to your computer, format
the USB storage media in FAT16 or
FAT32 format, and copy the files to the
USB storage media again.*
The USB device cannot be connected
into the
(USB) port .
The USB device is being connected
backwards. Connect the USB device in
the correct orientation.
Erroneous display
Send the music data to the USB device
again, as the data stored in the USB
device may have been corrupted.
Play does not start.
Turn off the system, then reconnect the
USB device.
Connect the USB device that this
system can play.
Press   (or USB   on the
unit) to start play.
Play does not start from the first
track.
Set the play mode to Normal Play
mode.
Continued

Additional Information
The USB storage media which has
been used on another device does
not work.
It may be recorded in an unsupported
format. If so, first take the precaution
of backing up important files on the
USB storage media by copying them to
your computer hard disk. Next, format
the USB storage media with a FAT16
or FAT32 file system and transfer the
backed-up audio files onto the USB
storage media again.*
“Reading” is displayed for a long
time.
It may take a while to finish reading the
USB device if there are many folders
or files on it. Thus, we recommend
following these guidelines.
Total folders on USB device: 100 or
less
Total files per folder: 100 or less
95GB
Files cannot be played back.
USB storage media formatted with file
systems other than FAT16 or FAT32 are
unsupported.*
If you use partitioned USB storage
media, only files on the first partition
can be played.
Files that are encrypted or protected by
passwords, etc. cannot be played back.
* This system supports FAT16 and FAT32, but
some USB storage media may not support all
of these FAT. For details, see the operation
manual of each USB storage media or
contact the manufacturer.
Picture
There is no picture.
Press FUNCTION +/  repeatedly
to select “DVD” (or press DVD  
on the unit).
Check that the system is connected
securely.
The video cord is damaged. Replace it
with a new one.
Make sure you connect the unit to the
video input jack of your TV (page 21).
Make sure you turn on the TV and
operate the TV correctly.
96GB
Press PROGRESSIVE  on the unit
repeatedly to select “INTERLACE”
if you connect your TV to the unit’s
COMPONENT VIDEO OUT jacks
and your TV cannot accept progressive
signal.
You have set to progressive format but
your TV cannot accept the signal in
progressive format. In this case, set to
interlace format (the default setting)
(page 22).
Even if your TV is compatible with
progressive format (525p/625p)
signals, the image may be affected
when you set to progressive format. In
this case, set to interlace format (the
default setting) (page 22).
Make sure you select the video input
on the TV so that you can view the
pictures from the system.
Make sure you set the color system
correctly, according to your TV’s color
system.
Make sure you connect the unit and
your TV using only the supplied video
cord.
Picture noise appears.
Clean the disc.
If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality. If you still experience
problems after checking your
connections, connect your unit directly
to your TV’s S Video input (page 21).
Keep the speaker cords away from the
antennas.
When you play back a VIDEO CD
recorded in a different color system
from the one you set to the system, the
picture image may be distorted.
When you connect your TV to the
COMPONENT VIDEO OUT jacks
and play back video-based software
in progressive signal format, some
sections of the image may appear
unnatural due to the conversion
process.
Set the color system to match your TV
(page 58).
Messages do not appear on the TV
screen in the language you want.
Select the language you want for the
on-screen display in “OSD” under
“LANGUAGE SETUP” in the Setup
Menu (page 57).
The subtitles language cannot be
changed.
Multilingual subtitles are not recorded
on the DVD VIDEO being played
back.
The DVD VIDEO prohibits changing
the subtitles.
The subtitles cannot be turned off.
The DVD VIDEO prohibits turning off
subtitles.
The angles cannot be changed.
Multi-angles are not recorded on the
DVD VIDEO being played back.
The DVD VIDEO prohibits changing
the angles.
Tuner
The radio presetting is canceled.
The power cord is disconnected or a
power failure occurred for longer than
half a day. Redo “Listening to preset
radio station” (page 62).
Continued

Additional Information
The aspect ratio of the TV screen
cannot be changed even though you
can set “TV TYPE” under “SCREEN
SETUP” in the Setup Menu when you
play back a wide picture.
The aspect ratio is fixed on your DVD
VIDEO.
If you connect the unit with the S
Video cord, connect directly to the TV.
Otherwise, you may not change the
aspect ratio.
Depending on the TV, you may not
change the aspect ratio.
The language for the sound track
cannot be changed.
Multilingual tracks are not recorded on
the DVD VIDEO being played back.
The DVD VIDEO prohibits changing
the language for the sound track.
97GB
There is severe hum or noise.
(“TUNED” or “ST” flashes in the
display)
Set the proper band and frequency
(page 61).
Connect the antenna properly
(page 19).
Find a place and an orientation that
provide good reception, then set up
the antenna again. If you cannot obtain
good reception, we recommend that
you connect a commercially available
external antenna.
The supplied FM lead antenna receives
signals along its entire length, so make
sure you extend it fully.
Locate the antennas as far away from
the speaker cords, power cord and the
USB cable as possible, to avoid picking
up noise.
Try turning off the surrounding
electrical equipment.
A stereo FM program cannot be
received in stereo.
Press REPEAT/FM MODE 
repeatedly until “MONO” disappears
from the display.
Optional components
There is no sound.
Refer to General item “There is no
sound.” (page 89) and check the
condition of the system.
Connect the component properly
(page 87) while checking:
 if the cords are connected properly.
 if the cord plugs are firmly inserted
all the way.
Turn on the connected component.
Refer to the operating instructions
supplied with the connected
component and start playing.
If the system still does not operate
properly after performing the
above measures or other troubles
not described above occur, reset the
system as follows:
Use buttons on the unit to reset the
system to its factory default settings.
1 Unplug the power cord.
2 Plug the power cord back in.
3 Press   to turn on the system.
4 Press  , DISPLAY  and  
at the same time.
“RESET” appears in the display.
98GB
The system is reset to the factory settings
except for DVD settings. You should set
the settings you made, such as the preset
stations, clock and timer.
To return the DVD setup to the default
settings*, perform reset as follows:
1 Press
DISPLAY  when playback
is stopped.
The Control Menu appears on the TV
screen.
2 Press  or   repeatedly to
select
ENTER .
(SETUP), then press
3 Press  or   repeatedly to select
“RESET,” then press ENTER .
4 Press  or   repeatedly to select
“YES,” then press ENTER .
It takes a few seconds to complete. Do
not press   when resetting the
system.
* Except for Parental Control settings
Self-diagnosis Function
(When letters/numbers appear in the
display)
When the self-diagnosis function
is activated to prevent the system
from malfunctioning, a 5-character
service number (e.g. C 13 50) with a
combination of a letter and 4 digits
appears on the TV screen and the front
panel display. In this case, check the
following table.
Continued

Additional Information
First 3
Cause and corrective
characters of action
the service
number
C 13
This disc is dirty.
Clean the disc with a
soft cloth (page 102).
C 31
The disc is not inserted
correctly.
Restart the system,
then re-insert the
disc correctly.
E XX
To prevent a
(XX is a
malfunction, the
number)
system has performed
the self-diagnosis
function.
Contact your nearest
Sony dealer or local
authorized Sony
service facility and
give the 5-character
service number.
Example: E 61 10
99GB
When displaying the version number
on the TV screen
When you turn on the system, the
version number [VER.X.XX] (X is a
number) may appear on the TV screen.
Although this is not a malfunction and
for Sony service use only, normal system
operation will not be possible. Turn off
the system, and then turn on the system
again to operate.
Messages
One of the following messages may
appear or flash in the front panel display
during operation.
DVD player, Tuner
Cannot Play
A disc that cannot be played back was
inserted.
A DVD VIDEO with unsupported
region code was inserted.
Data Error
The MP3 audio track, JPEG image file
and DivX video file you want to play
back is damaged.
The MP3 audio track does not conform
to MPEG 1 Audio Layer 3 format.
The JPEG image file does not conform
to DCF format.
The DivX video file does not conform
to a DivX Certified profiles.
The MP3 audio track has the extension
“.MP3” but it is not in MP3 format.
The JPEG image file has the extension
“.JPG” or “.JPEG” but it is not in JPEG
format.
The DivX video file has the extension
“.AVI” or “.DIVX” but it is not in DivX
format.
100GB
No Disc
There is no disc in the disc slot .
Not In Use
You have pressed a button whose
operation is not allowed or invalid at that
time.
OFF TIME NG!
The on time and off time of Play Timer
is the same.
PASSWORD
Custom Parental Control or Parental
Control is set.
Please Wait
The system is doing initialization process.
No Device
A pairable Bluetooth device was not
found, or connection was not possible.
Not In Use
The system is not connected with a
Bluetooth device using AVRCP.
PIN?
The system is asking for the passcode.
For details, see “Using the Bluetooth
function” (page 63).
Please Wait
The system is readying for usage of a
Bluetooth device.
USB device
ATRAC AD
An ATRAC Audio Device is connected.
Bluetooth device
Device Error
The USB device could not be recognized.
Connect
Bluetooth communication was
established.
No Device
No USB device is connected or the
connected USB device has been stopped.
Disconnect
Communication with a Bluetooth device
was cut off for some reason, or Bluetooth
communication was ended.
No Step
All of the programmed tracks or files
have been erased.
Not Connect
Connection was not possible.
Continued

Additional Information
Reading
The system is reading information of the
disc. Some buttons are not available.
101GB
No Track
No playable file is loaded in the system.
Not Supported
An unsupported USB device is
connected.
Please Wait
The system is readying for usage of an
USB device.
Reading
The system is recognizing the USB
device.
Removed
The USB device has been removed.
Step Full!
You tried to program more than 26 tracks
or files (steps).
StorageDrive
USB storage media is connected.
Precautions
Discs that this system CANNOT play
Discs of non-standard shape (for example,
heart, square, star)
Discs that have adhesive tape, paper, or
sticker attached to them
Rental or used discs with attached seals
where the glue extends beyond the seal
Discs that have labels printed using ink that
feels tacky when touched
Notes on discs
Before playing, wipe the disc with a cleaning
cloth from the center out to the edge.
Do not clean discs with solvents, such as
benzine thinner, or commercially available
cleaners or anti-static spray intended for
vinyl LPs.
Do not expose discs to direct sunlight or heat
sources such as hot air ducts, nor leave it in a
car parked in direct sunlight.
Do not use discs encircled with a protection
ring. This may cause a malfunction to the
system.
On operating voltage
Before operating the system, check that the
operating voltage of the unit is identical with
the voltage of your local power supply.
102GB
On safety
On heat buildup
The unit is not disconnected from the
AC power source (mains) as long as it is
connected to the wall socket, even if the unit
itself has been turned off.
Completely disconnect the power cord
(mains lead) from the wall socket (mains)
if it is not going to be used for an extended
period of time. When unplugging the unit,
always grip the plug. Never pull the cord
itself.
Should any solid object or liquid get into
the system, unplug the system, and have
it checked by qualified personnel before
operating it again.
The AC power cord can be changed only by a
qualified service facility.
Heat buildup on the unit during operation is
normal and is not cause for alarm.
Do not touch the cabinet if it has been used
continuously at a high volume because the
cabinet may have become hot.
Do not obstruct the ventilation holes.
On placement
The front speaker is magnetically shielded and
can be installed near a TV. Color irregularity
may still be observed, however on some types
of TV screens. In this situation, turn off the
TV, wait 15 to 30 minutes, and turn it back
on. Place the right speaker on the right side of
the unit and the left speaker on the left side of
the unit. If there is no improvement, move the
speakers far away from the TV.
IMPORTANT NOTICE
Caution: If you leave a still video image
or on-screen display image displayed on
your TV for an extended period of time via
this system, you risk permanent damage
to your TV screen. Projection TVs are
especially susceptible to this.
Cleaning the cabinet
Clean this system with a soft cloth slightly
moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring
powder, or solvent, such as thinner, benzine,
or alcohol.
Additional Information
Do not place the system in an inclined
position or in locations that are extremely
hot, cold, dusty, dirty, or humid or lacking
adequate ventilation, or subject to vibration,
direct sunlight or a bright light.
Be careful when placing the unit or speakers
on surfaces that have been specially treated
(for example, with wax, oil, polish) as
staining or discoloration of the surface may
result.
If the system is brought directly from a cold
to a warm location or is placed in a very
damp room, moisture may condense on the
lens inside the DVD player, and cause the
system to malfunction. In this situation,
remove the disc, and leave the system turned
on for about an hour until the moisture
evaporates.
On the speaker system
103GB
Specifications
Main unit
Amplifier section
DIN power output (rated)
40 W + 40 W (6 ohms at 1 kHz, DIN)
Continuous RMS power output (reference)
50 W + 50 W (6 ohms at 1 kHz, 10%
THD)
Inputs:
AUDIO IN (stereo mini jack):
Voltage 620 mV, impedance
47 kilohms
MIC (mini jack):
Sensitivity 0.8 mV, impedance 10
kilohms
(USB) port:
Type A, maximum current 500 mA
Outputs:
DIGITAL OUT (square optical connector
jack):
Wavelength 660 nm
VIDEO OUT (phono jack):
Max. output level 1 Vp-p, unbalanced,
Sync. negative load impedance
75 ohms
COMPONENT VIDEO OUT:
Y: 1 Vp-p, 75 ohms
Pb/Cb: 0.7 Vp-p, 75 ohms
Pr/Cr: 0.7 Vp-p, 75 ohms
S VIDEO OUT (4-pin/mini-DIN jack):
Y: 1 Vp-p, unbalanced, Sync. negative
C: 0.286 Vp-p, load impedance
75 ohms
PHONES (stereo mini jack):
accepts headphones of 8 ohms or
more
104GB
Bluetooth section
Communication system:
Bluetooth Standard version 2.0
Output:
Bluetooth Standard Power Class 2
Maximum communication range:
Line of sight approx. 10 m1)
Frequency band:
2.4 GHz band (2.4000 GHz  2.4835
GHz)
Modulation method:
FHSS
Compatible Bluetooth profiles2):
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
Supported codecs:
Receive: SBC (Sub Band Codec), MP3
Transmit: SBC (Sub Band Codec)
The actual range will vary depending
on factors such as obstacles between
devices, magnetic fields around a
microwave oven, static electricity,
reception sensitivity, antenna’s
performance, operating system,
software application, etc.
2)
Bluetooth standard profiles indicate the
purpose of Bluetooth communication
between devices.
1)
USB section
Supported bit rate:
MP3 (MPEG 1 Audio Layer-3):
32  320 kbps, VBR
ATRAC: 48  352 kbps
(ATRAC3plus), 66/105/132 kbps
(ATRAC3)
WMA: 32  192 kbps, VBR
AAC: 48  320 kbps
Sampling frequencies:
MP3 (MPEG 1 Audio Layer-3):
32/44.1/48 kHz
ATRAC: 44.1 kHz
WMA: 44.1 kHz
AAC: 44.1 kHz
Disc player section
System:
Compact disc and digital audio and
video system
Laser:
Laser Diode Properties:
Emission duration: continuous
Laser Output*: Less than 1000 µW
*This output is the value measurement
at a distance of 200 mm from the
objective lens surface on the Optical
Pick-up Block with 7 mm aperture.
Semiconductor laser:
(DVD: λ=650 nm, CD: λ=790 nm)
Frequency response:
DVD (PCM 48 kHz): 2 Hz  22 kHz
(±1dB)
CD: 2 Hz  20 kHz (±0.5 dB)
Video color system format:
European and Russian models: PAL
Other models: NTSC and PAL
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range:
87.5  108.0 MHz (50 kHz step)
Antenna:
FM lead antenna
Antenna terminals:
75 ohms unbalanced
Intermediate frequency:
10.7 MHz
Speaker (SS-CDH5)
Speaker system:
2-way, bass-reflex type, magnetically
shielded
Speaker units:
Woofer: 12 cm, cone type
Tweeter: 2.5 cm, soft dome type
Nominal impedance:
6 ohms
Dimensions (w/h/d):
Approx. 140 × 283 × 240 mm
Mass:
Approx. 2.7 kg net per speaker
Continued

Additional Information
Tuner section
AM tuner section
Tuning range:
European and Russian models: 531 
1,602 kHz (with the interval set at 9
kHz)
Other models:
530  1,710 kHz (with the interval set
at 10 kHz)
531  1,602 kHz (with the interval set
at 9 kHz)
Antenna:
AM loop antenna
Antenna terminals:
External antenna terminal
Intermediate frequency:
450 kHz
105GB
General
Power requirements:
Taiwan model: 120 V AC, 60 Hz
Thai model: 220 V AC, 50/60 Hz
Other models: 220  240 V AC,
50/60 Hz
Power consumption:
45 W
Dimensions (w/h/d) (Approx.):
190 × 141 × 273 mm
Mass (Approx.):
2.8 kg
Supplied accessories:
Remote Commander (1)
R6 (Size AA) batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Video cord (1)
Speaker pads (8)
Design and specifications are subject to
change without notice.
• Standby power
consumption: 0.5 W
• Halogenated flame
retardants are not used in
the certain printed wiring
boards.
106GB
Guide to the Control Menu display
Use the Control Menu to select a function and to view related information. Press
DISPLAY  repeatedly to turn on, turn off or change the Control Menu display as
follows:
Control Menu display 1  Control Menu display 2 (appears for certain discs only) 
Control Menu display off  Control Menu display 1  …
Control Menu display
The Control Menu display 1 and 2 will show different items depending on the disc type.
Example: Control Menu display 1 when playing a DVD VIDEO
Currently playing title number
Currently playing chapter number
Total number of titles
Total number of chapters
Control Menu
items
Type of disc being played
back
Elapsed playing time
Current setting
Options
Function name of
selected Control
Menu item
Operation message
Continued

Additional Information
Selected item
Playback status ( Playback,
 Pause,  Stop, etc.)
107GB
List of Control Menu items
Item
Item Name, Relevant Disc Type, Function
TITLE/SCENE/TRACK
Selects the title, scene, or track to be played back.
CHAPTER/INDEX
Selects the chapter or index to be played back.
TRACK
Selects the track to be played back.
ORIGINAL/PLAY LIST
Selects the playback sequence either to the originally recorded
sequence or to the playlist created on the disc.
TIME/TEXT
Checks the elapsed playing time and the remaining time.
Inputs the time code for picture and music searching.
Displays the text information on the DVD TEXT discs and MP3 audio
tracks.
PROGRAM
Plays back the track in the order you want.
SHUFFLE
Plays back the track in random order.
REPEAT
Plays back a disc repeatedly, the entire disc (all titles/all tracks/all
albums) repeatedly or one title/chapter/track/album/file repeatedly.
108GB
Item
Item Name, Relevant Disc Type, Function
A/V SYNC
Sets the delay time between the sound and display.
PARENTAL CONTROL
Sets to prohibit playback on this system.
SETUP
QUICK Setup
Use QUICK SETUP to choose the language of the on-screen display
and the aspect ratio of the TV.
CUSTOM Setup
In addition to the QUICK SETUP setting, you can adjust other
settings.
RESET
Returns the settings in “SETUP” to the default setting.
ALBUM
Selects the album to be played back.
FILE
Selects the JPEG image file or DivX video file to be played back.
DATE
Displays the date when the picture was taken by a digital camera.
EFFECT
Selects the transition effects to be used for changing slides during a
slide show.
Continued

Additional Information
INTERVAL
Specifies the duration for which the slides are displayed on the TV
screen.
109GB
Item
Item Name, Relevant Disc Type, Function
MODE (MP3, JPEG)
Selects the data type: MP3 audio track (AUDIO), JPEG image file
(IMAGE) or both (AUTO) to be played back when playing a DATA
CD/DVD.
KEY CONTROL*
Changes the key to suit your vocal range.
SCORE MODE*
Selects the level for scoring mode.
KARAOKE PON*
Enjoys karaoke with a stereo-recorded disc by reducing the sound of
the vocals.
VOCAL SELECT*
Selects the guide vocal recorded on the Dolby Digital Karaoke Format
disc (DVD VIDEO only).
Selects the vocal type recorded on the disc (VIDEO CD, AUDIO CD
only).
Turns off the vocal (VIDEO CD, AUDIO CD only).
GUIDE MELODY*
Turns on or off the guide melody for Dolby Digital Karaoke Format
disc.
* This function is only available during karaoke mode.
110GB
Language code list
The language spellings conform to the ISO 639:1988 (E/F) standard.
Code Language
Code Language
Code Language
1027
1028
1032
1039
1044
1045
1051
1052
1053
1057
1059
1060
1061
1066
1067
1070
1079
1093
1097
1103
1105
1109
1130
1142
1144
1145
1149
1150
1151
1157
1165
1166
1171
1174
1181
1183
1186
1194
1196
1203
1209
1217
1226
1229
1233
1235
1239
1245
1248
1253
1254
1257
1261
1269
1283
1287
1297
1298
1299
1300
1301
1305
1307
1311
1313
1326
1327
1332
1334
1345
1347
1349
1350
1352
1353
1356
1357
1358
1363
1365
1369
1376
1379
1393
1403
1408
1417
1428
1435
1436
1463
1481
1482
1483
1489
1491
1495
1498
1501
1502
1503
1505
1506
1507
1508
1509
1511
1512
1513
1514
1515
1516
1517
1521
1525
1527
1528
1529
1531
1532
1534
1535
1538
1539
1540
1543
1557
1564
1572
1581
1587
1613
1632
1665
1684
1697
1703
Afar
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali; Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Welsh
Danish
German
Bhutani
Greek
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faroese
French
Frisian
Irish
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Hindi
Croatian
Hungarian
Armenian
Interlingua
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
Latin
Lingala
Laothian
Lithuanian
Latvian; Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Polish
Pashto; Pushto
Portuguese
Quechua
Rhaeto-Romance
Kirundi
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangho
Serbo-Croatian
Singhalese
Slovak
Slovenian
Samoan
Shona
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
Telugu
Tajik
Thai
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
Twi
Ukrainian
Urdu
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Yoruba
Chinese
Zulu
Not specified
Continued

Additional Information
Code Language
111GB
Parental Control area code list
112GB
Code Area
Code Area
Code Area
Code Area
2044
2047
2046
2057
2070
2079
2090
2092
2115
2165
2174
2109
2248
2238
2254
2276
2304
2363
2362
2376
2390
2379
2427
2424
2436
2489
2501
2149
2499
2086
2528
2184
Argentina
Australia
Austria
Belgium
Brazil
Canada
Chile
China
Denmark
Finland
France
Germany
India
Indonesia
Italy
Japan
Korea
Malaysia
Mexico
Netherlands
New Zealand
Norway
Pakistan
Philippines
Portugal
Russia
Singapore
Spain
Sweden
Switzerland
Thailand
United Kingdom
Bluetooth wireless
technology
Profile refers to a standard set of
capabilities for various Bluetooth product
capabilities. This system supports the
following Bluetooth version and profiles.
Supported Bluetooth version:
Bluetooth Standard version 2.0
Supported Bluetooth profiles:
A2DP (Advanced Audio Distribution
Profile)
AVRCP (Audio Video Remote
Control Profile)
Effective communication range
Bluetooth devices should be used within
approximately 10 meters (unobstructed
distance) of each other. The effective
communication range may become
shorter under the following conditions.
When a person, metal object, wall
or other obstruction is between the
devices with a Bluetooth connection
Locations where a wireless LAN is
installed
Around microwave ovens that are in
use
Locations where other electromagnetic
waves occur
Continued

Additional Information
Bluetooth wireless technology is a shortrange wireless technology linking digital
devices, such as personal computers and
digital still cameras. Using the Bluetooth
wireless technology, you can operate the
units involved within a range of about
10 meters.
The Bluetooth wireless technology is
commonly used between two devices,
but a single device can be connected to
multiple devices.
You do not need wires to get connected
as you do with a USB connection, and
you do not need to place the devices face
to face as you do with wireless infrared
technology. You can use the technology
with one Bluetooth device in your bag
or pocket.
Bluetooth wireless technology is a global
standard supported by thousands of
companies. These companies produce
products that meet the global standard.
Supported Bluetooth version and
profiles
113GB
Effects of other devices
Bluetooth devices and wireless LAN
(IEEE 802.11b/g) use the same frequency
band (2.4 GHz). When using your
Bluetooth device near a device with
wireless LAN capability, electromagnetic
interference may occur. This could result
in lower data transfer rates, noise, or
inability to connect. If this happens, try
the following remedies:
Try connecting this system and
Bluetooth mobile phone or Bluetooth
device when you are at least 10 meters
away from the wireless LAN
equipment.
Turn off the power to the wireless LAN
equipment when using your Bluetooth
device within 10 meters.
Effects on other devices
The radio waves broadcast by this system
may interfere with the operation of some
medical devices. Since this interference
may result in malfunction, always turn
off the power on this system, Bluetooth
mobile phone and Bluetooth device in
the following locations:
In hospitals, on trains, in airplanes,
at gas stations, and any place where
flammable gasses may be present
Near automatic doors or fire alarms
114GB
Notes
This system supports security functions that
comply with the Bluetooth specification
as a means of ensuring security during
communication using Bluetooth technology.
However, this security may be insufficient
depending on the setting contents and
other factors, so always be careful when
performing communication using Bluetooth
technology.
Sony cannot be held liable in any way
for damages or other loss resulting from
information leaks during communication
using Bluetooth technology.
Bluetooth communication is not necessarily
guaranteed with all Bluetooth devices that
have the same profile as this system.
Bluetooth devices connected with this system
must comply with the Bluetooth specification
prescribed by the Bluetooth SIG, Inc., and
must be certified to comply. However, even
when a device complies with the Bluetooth
specification, there may be cases where
the characteristics or specifications of the
Bluetooth device make it impossible to
connect, or may result in different control
methods, display or operation.
Noise may occur or the audio may
cut off depending on the Bluetooth
device connected with this system,
the communications environment, or
surrounding conditions.
Playable USB devices
and Bluetooth devices
USB devices
You can play back the following Sony
USB devices on this system. Other USB
devices cannot be played back on this
system.
Verified Sony digital music player (as
of January 2007)
®
Product name Model name
MICROVAULT USM512EX / 1GEX /
2GEX
USM128J / 256J / 512J /
1GJ / 2GJ / 4GJ / 8GJ
USM512JX / 1GJX /
2GJX / 4GJX
USM256H / 512H /
1GH / 2GH / 4GH
USD2G / 4G / 5G / 8G
Check the websites below for the latest
information about compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
English <http://www.sony.ca/
ElectronicsSupport/>
French <http://fr.sony.ca/
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
Continued

Additional Information
Product name Model name
Walkman
NW-E103 / E105 /
E107
NW-E205 / E207
NW-E303 / E305 /
E307
NW-E403 / E405 /
E407
NW-E503 / E505 /
E507
NW-E002 / E002F /
E003 / E003F / E005 /
E005F
NW-A605 / A607 /
A608
NW-A1000 / A1200 /
A3000
NW-HD5
NW-S603 / S605 /
S703F / S705F / S706F
NW-S202 / S202F /
S203F / S205F
Verified Sony USB storage media (as of
January 2007)
115GB
Notes
Do not use USB devices other than these
USB devices. Operation of models not listed
here is not guaranteed.
Operation may not always be ensured even
when using these USB devices.
 Some of these USB devices may not be
available for purchase in certain areas.
Notes on Walkman
You cannot play back Linear PCM audio on
this system.
You cannot play back the ATRAC Advanced
Lossless audio format on this system.
You cannot play back music recorded directly
to a Walkman without using a computer on
this system.
Bluetooth devices
You can check the websites below for the
Bluetooth compatible devices.
For customers in the U.S.A.:
<http://www.sony.com/shelfsupport>
For customers in Canada:
English <http://www.sony.ca/
ElectronicsSupport/>
French <http://fr.sony.ca/
ElectronicsSupport/>
For customers in Europe:
<http://sonydigital-link.com/dna>
For customers in Latin America:
<http://www.sony-latin.com/pa/info>
For customers in Asia and Oceania:
<http://www.css.ap.sony.com/>
116GB
Glossary
Album
Section of a music or picture piece on
a DATA CD or DATA DVD containing
MP3 audio tracks, JPEG image files or
DivX image file.
Chapter
Subdivision of a title on a DVD VIDEO.
A title is composed of several chapters.
DivX®
Digital video technology created by
DivX, Inc. Videos encoded with DivX
technology are among the highest quality
with a relatively small file size.
Dolby Digital
This sound format for movie theaters is
more advanced than Dolby Surround
Pro Logic. In this format, the surround
speakers output stereo sound with
an expanded frequency range and a
subwoofer channel for deep bass is
independently provided. This format is
also called “5.1” because the subwoofer
channel is counted as 0.1 channel (since
it functions only when a deep bass effect
is needed). All six channels in this format
are recorded separately to realize superior
channel separation. Furthermore, since
all the signals are processed digitally, less
signal degradation occurs.
DTS
Digital audio compression technology
that the Digital Theater Systems, Inc.
developed. This technology conforms
to 5.1-channel surround. The surround
channel is stereo and there is discrete
subwoofer channel in this format. DTS
provides the same 5.1 discrete channels
of high quality digital audio. The good
channel separation is realized because the
all channel data is recorded discrete and
processed in digital.
DVD VIDEO
DVD-RW
A DVD-RW is a recordable and
rewritable disc that is the same size as
a DVD VIDEO. The DVD-RW has two
different modes: VR mode and Video
mode. DVD-RWs created in Video
mode have the same format as a DVD
VIDEO, while discs created in VR (Video
Recording) mode allow the contents to
be programmed or edited.
DVD+RW
A DVD+RW (plus RW) is a recordable
and rewritable disc. DVD+RWs use a
recording format that is comparable to
the DVD VIDEO format.
File
A JPEG image file or a DivX video file
recorded on a DATA CD or DATA DVD.
(“File” is an exclusive definition for this
system.) A single file consists of a single
image or movie.
Continued

Additional Information
A disc that contains up to 8 hours of
moving pictures even though its diameter
is the same as an AUDIO CD.
The data capacity of a single-layer and
single-sided DVD VIDEO, at 4.7 GB
(Giga Byte), is 7 times that of an AUDIO
CD. Furthermore, the data capacity of a
dual-layer and single-sided DVD VIDEO
is 8.5 GB, a single-layer and double-sided
DVD VIDEO 9.4 GB, and a dual-layer
and double-sided DVD VIDEO 17 GB.
The picture data uses the MPEG 2
format, one of the worldwide standards
for digital compression technology. The
picture data is compressed to about 1/40
of its original size. The DVD VIDEO
also uses variable rate coding technology
that changes the data to be allocated
according to the status of the picture.
The audio data is recorded in Dolby
Digital as well as in PCM, allowing you to
enjoy more realistic audio presence.
Furthermore, various advanced functions
such as the multi-angle, multilingual, and
Parental Control functions are provided
with the DVD VIDEO.
117GB
Film based software, Video based
software
DVD VIDEOs can be classified as Film
based or Video based software. Film
based DVD VIDEOs contain the same
images (24 frames per second) that are
shown at movie theaters. Video based
DVD VIDEOs, such as television dramas
or sitcoms, displays images at 30 frames
(or 60 fields) per second.
Interlace format (Interlaced scanning)
The Interlace format is the NTSC
standard method for displaying TV
images at 30 frames per second. Each
frame is scanned twice-alternately
between the even numbered scanning
lines and then odd numbered scanning
lines, at 60 times per second.
Multi-angle function
Various angles, or viewpoints of the video
camera, for a scene are recorded on some
DVD VIDEOs.
Multilingual function
Several languages for the sound or
subtitles in a picture are recorded on
some DVD VIDEOs.
118GB
Parental Control
A function of the DVD VIDEO to limit
playback of the disc by the age of the
users according to the limitation level in
each country. The limitation varies from
disc to disc; when it is activated, playback
is completely prohibited, violent scenes
are skipped or replaced with other scenes
and so on.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version
2.0) to control playback. By using menu
screens recorded on VIDEO CDs with
PBC functions, you can enjoy playing
simple interactive programs, programs
with search functions, and so on.
Progressive format (sequential
scanning)
In contrast to the Interlace format,
the progressive format can reproduce
50  60 frames per second by
reproducing all scanning lines (525
lines for the NTSC system, 625 lines
for PAL system). The overall picture
quality increases and still images, text
and horizontal lines appear sharper. This
format is compatible with the 525 or 625
progressive format.
Region Code
This system is used to protect copyrights.
A region code is allocated on each DVD
system or DVD VIDEO according to
the sales region. Each region code is
shown on the unit as well as on the disc
packaging. The system can play back
the discs that match its region code. The
system can also play back discs with the
“
” mark. Even when the region code
is not shown on the DVD VIDEO, the
region limit may still be activated.
Scene
On a VIDEO CD with PBC functions,
the menu screens, moving pictures and
still pictures are divided into sections
called “scenes.”
Title
The longest section of a picture or a
music piece on a DVD VIDEO; a movie,
etc., for a picture piece on video software,
or the entire album in audio software.
Track
A compact disc that contains moving
pictures.
The picture data uses the MPEG 1
format, one of the worldwide standards
for digital compression technology. The
picture data is compressed to about 1/140
of its original size. Consequently, a 12 cm
VIDEO CD can contain up to 74 minutes
of moving pictures.
VIDEO CDs also contain compact audio
data.
Sounds outside the range of human
hearing are compressed while the
sounds we can hear are not compressed.
VIDEO CDs can hold 6 times the audio
information of conventional AUDIO
CDs.
There are 2 versions of VIDEO CDs.
Version 1.1: You can play back only
moving pictures and sounds.
Version 2.0: You can play back highresolution still pictures and enjoy PBC
functions.
This system conforms to both versions.
Additional Information
Section of a picture or a music piece on
a VIDEO CD, CD, or MP3. An album is
composed of several tracks (MP3 only).
VIDEO CD
119GB
Index
Numerics
D
K
16:9 58
4:3 LETTER BOX 58
4:3 OUTPUT 58
4:3 PAN SCAN 58
DATA CD 7
DATA DVD 8
DIMMER 83
DISPLAY 24
DivX 48, 116
Dolby Digital 116
DTS 117
DVD 7
DVD+RW 7, 117
DVD-RW 7, 117
DVD’s menu 39
Karaoke 75
ECHO 75, 76
KARAOKE PON 78, 110
KEY CONTROL 78, 110
SCORE MODE 79, 110
Vocal 76
VOCAL SELECT 78, 110
A
A/V SYNC 50, 109
A2DP 63, 113
AAC 70, 72
ALBUM 109
Album 29, 116
ANGLE 30
ATRAC 70, 73
ATRAC AD 70
AUDIO 57
AUDIO DRC 60
AVRCP 63, 65, 69, 113
EFFECT 48, 109
F
Language Code List 111
LANGUAGE SETUP 25, 57
Listening to other
components 88
Listening to the radio 61
Locating a specific point by
watching the TV screen 40
BACKGROUND 58
Batteries 20
Bluetooth device address 66
BLUETOOTH OPR 64, 65,
68, 69
Fast forward 29
Fast reverse 29
FILE 109
File 117
Film based software 118
Freeze Frame 29
Front panel 87
Front panel display 18
C
H
CHAPTER 40, 108
Chapter 29, 116
Cold reset 98
COLOR SYSTEM (VIDEO
CD) 58
COMPONENT VIDEO OUT
22, 88
Continuous play 46
Controlling the TV 23
Control Menu Display 107
CUSTOM 56
CUSTOM PARENTAL
CONTROL 51
CUSTOM SETUP 59
Handling discs 28
MENU 57
Microphone 75, 76
MODE (MP3, JPEG) 110
MP3 7
Multi-angle function 30, 118
MULTI-DISC RESUME
34, 59
Multilingual function 118
Multi Session CD 10
I
O
B
120GB
E
L
INDEX 108
Instant Advance 29
Instant Replay 29
INTERLACE 22
Interlace format 118
INTERVAL 109
J
JPEG 42, 44, 46
M
ORIGINAL 39, 108
OSD 57
Other Component Hookup
87
P
T
Pairing 64, 65, 67, 68
PARENTAL CONTROL
53, 109
Parental Control 118
Passcode 64
Passkey 65
PAUSE MODE 59
PBC Playback 32
PICTURE NAVI 41, 45
PIN 64
Playback Control (PBC) 118
Playing a disc 28
PLAY LIST 39, 108
Play Timer 81
Program Play 34
PROGRESSIVE AUTO 22
Progressive format 118
PROGRESSIVE VIDEO 22
THEATRE SYNC 27
TIME/TEXT 108
Timer 81
TITLE 37, 108
Title 39, 119
TRACK 108
Track 7, 8
TRACK SELECTION 59
Troubleshooting 89
TV Hookup 21
TV TYPE 58
R
S
Scan 26, 58
SCENE 108
Scene 119
SCREEN SAVER 58
SCREEN SETUP 25
Searching 39
Selecting 39
SETUP 109
Setup Display 25
Shuffle Play 36
SLEEP 27, 81
Sleep Timer 81
Slide Show 44, 46
Slow-motion Play 29
SUBTITLE 57
S VIDEO 88
Usable discs 7
USB 70
USB MEMORY 94
USB Storage 70, 115
V
VIDEO CD 7, 119
W
WMA 70, 72
Additional Information
Radio 61
Radio Stations 62
Rear Panel 87
Region Code 119
Remote 13
Repeat Play 37
RESET 98, 109
Resume Play 33
U
121GB
122GB
Additional Information
123GB
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising