2.0 SPEAKER SYSTEM For technial support please visit http://www.laserco.com.au LASER SPK-S10 User Manual ] POWER Please read carefully before use SPK-S10 User Manual SPECIFICATION Frequency response 120Hz - 20KHz Speaker : 5090 x 2 FULL RANGE Power Input: 240VAC/50Hz Audio input: 3.5 mm stereo jack Dimensions: 67mm (W) X 200mm (H) X 58mm (D). INSTALLATION AND OPERATION GUIDE A: Before connecting be sure that all components are switched off, B: Insert the 3.5mm stereo jack in to the audio out socket of the PC sound card, MP3 Player or other Audio Devices. C: Plug the AC power cable in to the power socket. D: Turn the volume control to minimum and then switch the speaker system on by pressing the POWER button. The LED will light up. E: Adjust the volume knob to a desirable volume level. POWER Headphone Jack VOLUME CONNECTIONS ( CD/ MP3/ Radio/ Computer......) To Audio Source е (@ e ® ® *Disconnect AC power cord from the power outlet when not in use.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project