Lexmark 910 Series Printer User Manual

Add to my manuals
2 Pages

advertisement

Lexmark 910 Series Printer User Manual | Manualzz

Please save this sheet for future reference.

*11X1111*

1

1

Unpack your printer

Note: Contents may vary.

2

Prepare the printer

Connect the power cord.

2

Make sure the Power light is on.

~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~

3

Press + to scroll to your language, and then press .

910 Series

~~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~~~~~~~

~~~~~~~~~~~~~~~ ?

~~~~~~~~~~~~~~~ ?

http://support.lexmark.com/

Safety information

Use only the power supply provided with this product or the manufacturer's authorized replacement power supply.

Connect the power supply cord to an electrical outlet that is near the product and easily accessible.

Refer service or repairs, other than those described in the user documentation, to a professional service person.

CAUTION: Do not set up this product or make any electrical or cabling connections, such as the power supply or telephone, during a lightning storm.

1

3

Load paper

Lift the paper support and extend the paper exit tray.

2

Load the paper.

3

Lower the paper feed guard, squeeze the paper guide, and slide it to the left edge of the paper.

3

2

1

2

1

4

Install the print cartridges

1

Open the access cover.

2

Remove the photo cartridge from the print cartridge storage unit.

3

Remove the sticker and tape from the bottom of the print cartridges.

1 1

2 2

4

Open the cartridge lids, insert the cartridges, and snap the cartridge lids closed.

2

1

5

Close the access cover.

6

Press to print an alignment page.

You may discard the alignment page after it prints.

Reminder: Save the print cartridge storage unit to protect new or partially used cartridges.

Warning: Do not touch the copper contact area on the back or the metal print cartridge nozzles on the bottom.

1

www.lexmark.com

2 3

If you are using your printer with a computer, continue with “Install the software”...

5

(Windows) Install the software

1

Make sure your computer is on and attach the USB cable to your printer and computer.

2

Click Cancel on all New Hardware windows.

Windows 98/Me

To prevent errors during installation, be sure to:

1 Close all open programs.

2 Temporarily disable any antivirus software. For help, refer to your program documentation or contact the software manufacturer for support.

Important: After installation is complete, remember to re-enable your antivirus software.

3

Insert the CD and click Install.

Follow the instructions on your screen to complete the installation.

2

1 Windows 2000/XP

(Macintosh) Install the software

1

Make sure your computer is on and attach the USB cable to your printer and computer.

To prevent errors during installation, be sure to:

1 Close all open programs.

2 Temporarily disable any antivirus software. For help, refer to your program documentation or contact the software manufacturer for support.

Important: After installation is complete, remember to re-enable your antivirus software.

2

Insert the CD.

Follow the instructions on the screen to complete the installation.

2

1

Setup troubleshooting

Symptom

The Power light is not lit

Software will not install

Diagnosis Solution

Is the power cord pushed all the way into the printer?

Disconnect the power cord from the wall outlet, and then from the printer. Reconnect the power cord by pushing it all the way into the connector on the printer, and then into the wall outlet.

Is the printer connected to a working electrical outlet?

Connect the printer to an electrical outlet that other electrical devices have been using.

Is your operating system compatible with the printer?

The printer supports these operating systems:

• Windows 98, Windows Me, Windows 2000, and Windows XP

• Mac OS X versions 10.1.5, 10.2.3–2.8, and 10.3.0–3.4.

The control panel displays text in the wrong language

Did you select a language?

1 Press Menu.

2 Press the down arrow button until you reach the last item.

3 Press the up arrow button twice.

4 Press the right arrow button until the language you want appears on the control panel display.

5 Press Select to select that language.

P/N 11X1111 E.C. 1X1111

© 2004 Lexmark International, Inc. All rights reserved.

If this install screen does not appear, click

Start Æ Run, and type D:\setup.exe, where

D is the letter of your CD-ROM drive.

Need ink?

1

If the installation screen does not run automatically, double-click:

2 31 32

34

33

35

Have a question?

Refer to your User’s Guide.

Visit our Web site: http://support.lexmark.com/.

Call us at 1-800-332-4120.

Monday–Friday (9:00 AM–9:00 PM EST)

Saturday (Noon–6:00 PM EST)

Note: Phone number and support times may change without notice.

Record the following information (located on your store receipt and the back of your printer) and have it ready when you contact us so that we may serve you faster:

Machine Type number_____________________________

Serial number____________________________________

Date purchased__________________________________

Store where purchased____________________________

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Key Features

  • Home & office 4800 x 1200 DPI
  • Inkjet
  • LCD
  • USB port

Related manuals

Download PDF

advertisement