advertisement
▼
Scroll to page 2
of 116
Introduction Owner's Manual Playback INSTRUCCIONES EN ESPAÑOL INCLUIDAS. Recording NEED HELP FAST? READ YOUR QUICK GUIDE AND/OR OWNER'S MANUAL FIRST FOR QUICK TIPS THAT MAKE USING YOUR MAGNAVOX PRODUCT MORE ENJOYABLE. IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE, YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.FUNAI-CORP.COM OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT. Basic Setup THANK YOU FOR CHOOSING MAGNAVOX. Connections H2080MW8 HDD & DVD PLAYER / RECORDER WITH DIGITAL TUNER Editing Function Setup Others E2H00UD.indd 1 Español © 2007 Funai Electric Co., Ltd. 2007/05/11 10:15:02 PRECAUTIONS WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance. The caution marking is located on the rear of the cabinet. Laser Safety This unit employs a laser. Only a qualified service person should remove the cover or attempt to service this device, due to possible eye injury. CAUTION: USE OF CONTROLS OR ADJUSTMENTS OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCK DEFEATED. DO NOT STARE INTO BEAM. LOCATION: INSIDE, NEAR THE DECK MECHANISM. FCC WARNING- This equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the manual. The user could lose the authority to operate this equipment if an unauthorized change or modification is made. RADIO-TV INTERFERENCE This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. 4) Consult the dealer or an experienced radio/TV technician for help. This Class B digital apparatus complies with Canadian ICES-003. Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada. CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT. ATTENTION: POUR ÉVITER LES CHOCS ÉLECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU’AU FOND. A NOTE ABOUT RECYCLING This product’s packaging materials are recyclable and can be reused. Please dispose of any materials in accordance with your local recycling regulations. Batteries should never be thrown away or incinerated but disposed of in accordance with your local regulations concerning chemical wastes. Make your contribution to the environment!!! • Used up batteries do not belong in the dust bin. • You can dispose of them at a collection point for used up batteries or special waste. Contact your council for details. For Customer Use: Read carefully the information located at the back of this unit and enter below the Model No. and Serial No. Retain this information for future reference. Model No. _____________________ Serial No. _____________________ 2 E2H00UD.indd 2 EN 2007/05/11 10:15:04 PRECAUTIONS information with regard to proper grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode. (Fig. A) FIGURE A EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL ELECTRICAL CODE ANTENNA LEAD WIRE GROUND CLAMP ANTENNA DISCHARGE UNIT (NEC SECTION 810-20) NEC – NATIONAL ELECTRICAL CODE S2898A Basic Setup ELECTRIC SERVICE EQUIPMENT GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMP POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H) Recording Playback Editing Function Setup Others Español 14. Lightning - For added protection for this product during a lightning storm, or when it is left unattended and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna or cable system. This will prevent damage to the product due to lightning and power-line surges. 15. Power Lines - An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal. 16. Overloading - Do not overload wall outlets and extension cords as this can result in a risk of fire or electric shock. 17. Object and Liquid Entry - Never push objects of any kind into this product through any openings as they may touch dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any kind on the product. 18. Servicing - Do not attempt to service this product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 19. Damage Requiring Service - Unplug this product from the wall outlet and refer servicing to qualified service personnel under the following conditions: a. When the power-supply cord or plug is damaged. b. If liquid has been spilled, or objects have fallen into the product. c. If the product has been exposed to rain or water. d. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions as an improper adjustment of other controls may result in damage and will often require extensive work by a qualified technician to restore the product to its normal operation. e. If the product has been dropped or damaged in any way. f. When the product exhibits a distinct change in performance this indicates a need for service. 20. Replacement Parts - When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock or other hazards. 21. Safety Check - Upon completion of any service or repairs to this product, ask the service technician to perform safety checks to determine that the product is in proper operating condition. 22. Heat - This product should be situated away from heat sources such as radiators, heat registers, stoves, or other products (including amplifiers) that produce heat. EN E2H00UD.indd 3 Connections 1. Read Instructions - All the safety and operating instructions should be read before the appliance is operated. 2. Retain Instructions- The safety and operating instructions should be retained for future reference. 3. Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to. 4. Follow Instructions - All operating and use instructions should be followed. 5. Cleaning - Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning. EXCEPTION: A product that is meant for uninterrupted service and, that for some specific reason, such as the possibility of the loss of an authorization code for a CATV converter, is not intended to be unplugged by the user for cleaning or any other purpose, may exclude the reference to unplugging the appliance in the cleaning description otherwise required in item 5. 6. Attachments - Do not use attachments not recommended by the product manufacturer as they may cause hazards. 7. Water and Moisture- Do not use this product near water, for example, near a bath tub, wash bowl, kitchen sink, or laundry tub, in a wet basement, or near a swimming pool, and the like. 8. Accessories - Do not place this product on an unstable cart, stand, tripod, bracket, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket, or table recommended by the manufacturer, or sold with the product. Any mounting of the appliance should follow the manufacturer’s instructions and should use a mounting accessory recommended by the manufacturer. An appliance and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may cause the appliance and cart combination to overturn. 9. Ventilation - Slots and openings in the cabinet are provided for ventilation and to ensure reliable operation of the product and to protect it from overheating, and these openings must not be blocked or covered. The openings should never be blocked by placing the product on a bed, sofa, rug, or other similar surface. This product should not be placed in a built-in installation such as a bookcase or rack unless proper ventilation is provided or the manufacturer’s instructions have been adhered to. 10. Power Sources - This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply to your home, consult your appliance dealer or local power company. For products intended to operate from battery power, or other sources, refer to the operating instructions. 11. Grounding or Polarization - This product is equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you are unable to insert the plug fully into the outlet, try reversing the plug. If the plug should still fail to fit, contact your electrician to replace your obsolete outlet. Do not defeat the safety purpose of the polarized plug. 12. Power Cord Protection - Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance. 13. Outdoor Antenna Grounding - If an outside antenna or cable system is connected to the product, be sure the antenna or cable system is grounded so as to provide some protection against voltage surges and built-up static charges. Article 810 of the National Electrical Code, ANSI/NFPA No. 70, provides Introduction Important Safeguards 3 2007/05/11 10:15:04 PRECAUTIONS Installation Location For safety and optimum performance of this unit: • Install the unit in a horizontal and stable position. Do not place anything directly on top of the unit. Do not place the unit directly on top of the TV. • Shield it from direct sunlight and keep it away from devices of intense heat. Avoid dusty or humid places. Avoid places with insufficient ventilation for proper heat dissipation. Do not block the ventilation holes on the sides of the unit. Avoid locations subject to strong vibration or strong magnetic fields. Supplied Accessories remote control (NB504UD) with batteries (AAAx2) RF coaxial cable (WPZ0901TM002) Avoid the Hazards of Electrical Shock and Fire • Do not handle the power cord with wet hands. • Do not pull on the power cord when disconnecting it from AC outlet. Grasp it by the plug. • If, by accident, water is spilled on this unit, unplug the power cord immediately and take the unit to our Authorized Service Center for servicing. RCA audio/video cables (WPZ0102TM015/WPZ0102LTE01) Moisture Condensation Warning Moisture condensation may occur inside the unit when it is moved from a cold place to a warm place or after heating a cold room or under conditions of high humidity. Do not use this unit at least for 2 hours until its inside gets dry. owner's manual (1VMN23645) About Copyright Unauthorized copying, broadcasting, public performance and lending of discs are prohibited. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Use of this copyright protection technology must be authorized by Macrovision, and is intended for home and other limited viewing uses only unless otherwise authorized by Macrovision. Reverse engineering or disassembly is prohibited. quick guide (1VMN23646) Notice for Progressive Scan Output Consumers should note that not all high definition television sets are fully compatible with this product and may cause artifacts to be displayed in the picture. In case of picture problems with 525 (480) progressive scan output, it is recommended that the user switch the connection to the ‘standard definition’ output. If there are questions regarding your TV set compatibility with this 525p (480p) DVD player, please contact our customer service center. 4 E2H00UD.indd 4 EN 2007/05/11 10:15:05 PRECAUTIONS Cleaning the cabinet • Use a soft cloth slightly moistened with a mild detergent solution. Do not use a solution containing alcohol, spirits, ammonia or abrasive. • When a disc becomes dirty, clean it with a cleaning cloth. Wipe the disc from the center to out. Do not wipe in a circular motion. • Do not use solvents such as benzine, thinner, commercially available cleaners, detergent, abrasive cleaning agents or antistatic spray intended for analog records. If the remote control does not work properly, you can test if the remote control sends out the infrared signal with AM radio or a digital camera (including built-in camera of cellular phone). It will help to define the cause of malfunction. • With an AM radio: Tune an AM radio to a station with no broadcasting. Press a button on remote control toward the radio. Sound will be fluttering when you press any key and the radio receives the signal. This means the remote control is working. • With a digital camera (including built-in camera of cellular phone): Direct a digital camera to remote control, press and hold a button on remote control. If infrared light appears through digital camera, the remote control is working. Recording Cleaning the disc lens • If this unit still does not perform properly although you refer to the relevant sections and to “TROUBLESHOOTING” in this owner's manual, the laser optical pickup unit may be dirty. Consult your dealer or an Authorized Service Center for inspection and cleaning of the laser optical pickup unit. • Handle the discs so that fingerprints and dust do not adhere to the surfaces of the discs. • Always store the disc in its protective case when it is not used. HDD handling Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Dolby Digital Recording “Dolby® Digital Recording enables consumers to record high-quality video with stereo sound on recordable DVD discs. The technology, when utilized instead of PCM recording, also saves recordable disc space, allowing for higher video resolution or extended recording time on each DVD. DVDs created using Dolby Digital Recording will play back on all DVD-video players.” Note: This is true when the players are compatible with actual recordable DVD discs. Editing Function Setup • HDD is a precision apparatus that is susceptible to vibration, strong impact or dirt. Depending on the installation environment or handling, the unit may become partially damaged or in the worst case, recording or replaying may not be available. Especially while the HDD is in motion, do not subject it to vibration or strong impact or pull out the power plug. And if a power failure occurs, the content of the recording / replaying program may be lost. • HDD rotates at high speed when in operation. Be sure that rotation has stopped and then move the unit without subjecting it to strong impact or vibration. “Kodak Picture CD COMPATIBLE” is a trademark of Eastman Kodak Company. Playback Disc handling Basic Setup Cleaning discs IR signal check Connections • Please refer to relevant topics on “TROUBLESHOOTING” on pages 105-108 before returning the product. • If this unit becomes inoperative, do not try to correct the problem by yourself. There are no user-serviceable parts inside. Turn off, unplug the power plug and please call our help line mentioned on the front page to locate an Authorized Service Center. Introduction Maintenance Servicing © 2007 Funai Electric Co., Ltd. Others All rights reserved. No part of this manual may be reproduced, copied, transmitted, disseminated, transcribed, downloaded or stored in any storage medium, in any form or for any purpose without the express prior written consent of Funai. Furthermore, any unauthorized commercial distribution of this manual or any revision hereto is strictly prohibited. Information in this document is subject to change without notice. Funai reserves the right to change the content herein without the obligation to notify any person or organization of such changes. EN E2H00UD.indd 5 Español with the design is a registered trademark of Funai Electric Co., Ltd and may not be used in any way without the express written consent of Funai. All other trademarks used herein remain the exclusive property of their respective owners. Nothing contained in this manual should be construed as granting, by implication or otherwise, any license or right to use any of the trademarks displayed herein. Misuse of any trademarks or any other content in this manual is strictly prohibited. Funai shall aggressively enforce its intellectual property rights to the fullest extent of the law. 5 2007/05/11 10:15:05 CONTENTS Introduction Recording PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Symbols Used in this Owner's Manual . . . . . . . . . . . . . . .9 FUNCTIONAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . 10 Front Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Rear Panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Front Panel Display. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 INFORMATION ON RECORDING . . . . . . . . . . . . . . . . . . BEFORE RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . Make Recording Compatible . . . . . . . . . . . . . . . . . . . . . . Setting for Auto Chapter . . . . . . . . . . . . . . . . . . . . . . . . . . BASIC RECORDING & ONE-TOUCH TIMER RECORDING . . . . . . . . . . . . . . . . . TIMER RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hints for Timer Recording . . . . . . . . . . . . . . . . . . . . . . . . . SPECIAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . . Time Shift Recording . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Overwriting from the Beginning of the Title. . . . . . . . Overwriting in the Middle of the Title . . . . . . . . . . . . . . Hints for Overwriting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DUBBING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Information on Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . Settings for an External Device . . . . . . . . . . . . . . . . . . . . Recording from an External Device . . . . . . . . . . . . . . . . Selected Title Dubbing . . . . . . . . . . . . . . . . . . . . . . . . . . . . One Title Dubbing (HDD to DVD only) . . . . . . . . . . . . . PROTECTING A DISC. . . . . . . . . . . . . . . . . . . . . . . . . . . . . PLAYING THE DISCS ON OTHER DVD PLAYERS . . . . Finalizing a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto Finalizing . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connections ANTENNA CABLE CONNECTION . . . . . . . . . . . . . . . . . . RF MODULATOR CONNECTION. . . . . . . . . . . . . . . . . . . CONNECTION TO A CABLE / SATELLITE BOX. . . . . . . CONNECTION TO A TV. . . . . . . . . . . . . . . . . . . . . . . . . . . CONNECTION TO AN AUDIO SYSTEM . . . . . . . . . . . . . 15 16 17 18 19 Basic Setup BEFORE YOU START . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Finding the Viewing Channel on Your TV . . . . . . . . . . Guide to On-Screen Display / Menu. . . . . . . . . . . . . . . . Main Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching HDD / DVD Mode . . . . . . . . . . . . . . . . . . . . . . . How to Insert a Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . INITIAL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . CHANNEL SETTING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto Channel Scan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Adding / Deleting Channels . . . . . . . . . . . . . . . . . . . . . . . SETTING THE CLOCK . . . . . . . . . . . . . . . . . . . . . . . . . . . . Auto Clock Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Manual Clock Setting. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Daylight Saving Time. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . TUNER SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching Analog Mode / Digital Mode . . . . . . . . . . . . Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Selecting TV Audio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . DTV Closed Caption . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Closed Caption Style . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 E2H00UD.indd 6 20 20 21 22 24 24 25 26 26 27 29 29 30 30 31 31 31 32 34 35 37 39 39 39 40 42 45 46 46 47 47 48 49 49 50 51 52 54 55 56 56 57 EN 2007/05/11 10:15:06 CONTENTS Introduction Editing 58 60 60 61 74 74 75 75 76 76 78 79 80 81 82 83 84 86 87 88 89 90 91 92 Recording Function Setup Playback LIST OF SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93 SETUPS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96 Display . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100 Video . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102 Reset All . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 104 Editing 63 64 64 65 65 65 65 65 66 66 66 66 67 67 68 68 69 69 70 70 70 71 72 72 72 73 73 73 INFORMATION ON EDITING. . . . . . . . . . . . . . . . . . . . . . Guide to a Title List. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Edit Menu. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . How to Access the Edit Menu. . . . . . . . . . . . . . . . . . . . . . EDITING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting a Title. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting Selected Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . Putting Names on Titles . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter Marks (Add) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter Marks (Delete) . . . . . . . . . . . . . . . . . . . . . . . . . . . . Chapter Marks (Delete All). . . . . . . . . . . . . . . . . . . . . . . . . Dividing a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting a Scene of a Title . . . . . . . . . . . . . . . . . . . . . . . . . Protecting a Title . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Hiding Chapters. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Setting an Index Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . Putting Name on Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Erasing Disc . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Making Edits Compatible . . . . . . . . . . . . . . . . . . . . . . . . . . Deleting All Titles in HDD. . . . . . . . . . . . . . . . . . . . . . . . . . Basic Setup INFORMATION ON PLAYBACK . . . . . . . . . . . . . . . . . . . BASIC PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Direct Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Playback from the Title List . . . . . . . . . . . . . . . . . . . . . . . . Playing Back an Audio CD and a CD-RW/-R with MP3 / JPEG Files. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Using the Title / Disc Menu . . . . . . . . . . . . . . . . . . . . . . . . Pause . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SPECIAL PLAYBACK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Resume Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Fast Forward / Fast Reverse Playback . . . . . . . . . . . . . . Variable Skip / Variable Replay. . . . . . . . . . . . . . . . . . . . . Rapid Playback. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Step by Step Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Slow Forward / Slow Reverse Playback. . . . . . . . . . . . . Time Shift Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Simultaneous Playback and Recording. . . . . . . . . . . . . Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Marker Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Repeat Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Random Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Program Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Slide Show . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SEARCH . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Title / Chapter Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Track Search . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Time Search. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . SELECTING THE FORMAT OF AUDIO AND VIDEO . . Switching Subtitles. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Switching Audio Soundtrack . . . . . . . . . . . . . . . . . . . . . . Switching Virtual Surround System . . . . . . . . . . . . . . . . Switching Camera Angles . . . . . . . . . . . . . . . . . . . . . . . . . Reducing Block Noise . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Connections Playback Others Function Setup TROUBLESHOOTING . . . . . . . . . . . . . . . . . . . . . . . . . . . 105 Frequently Asked Questions . . . . . . . . . . . . . . . . . . . . . . 107 LANGUAGE CODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 109 GLOSSARY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 110 SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 111 Español ESPAÑOL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112 LIMITED WARRANTY . . . . . . . . . . . . . . . . . . . . Back cover Others Español EN E2H00UD.indd 7 7 2007/05/11 10:15:06 FEATURES This unit not only plays back the contents on internal HDD, DVD, or CD, but also offers features for you to record on HDD or DVD and edit them after that. The following features are offered with this unit. Recording Playback This unit allows you to record on the HDD, a DVD+RW/RW (rewritable) and a DVD+R/-R (one-time write). You can choose any one for your convenience. Even if you choose DVD-RW/-R, these discs will automatically be recorded in the DVD+VR mode. HDD DVD Up to 36 program recording: You can program the unit to record up to 36 programs within a one-month period. Daily or weekly program recordings are also available. One-touch timer recording (OTR): You can easily set a recording time as you prefer. Every time [REC I] is pressed during recording, the recording time will be increased by 30 minutes up to 6 hours. The recording automatically stops when the recording time you set is reached or the disc is full. Automatic chapter mark setting: Chapter marks will be put on recordings as you set before attempting to record. Automatic title list making: The unit makes a title list with the index automatically. HDD 80 GB hard disc: This unit is equipped with a 80GB hard disc which allows you to record up to 90 hours (with SLP mode). Time shift recording: With [TIME SHIFT] button, you can virtually pause and resume the live TV broadcast. DVD Alternate recording: If there is no recordable disc in the unit, if the disc does not have enough space to complete the recording, or if the material is “copy-once” program and prohibited to be recorded on a DVD, the unit will detect it and automatically record to the HDD even when DVD is selected as the recording media. This feature is available only for timer recording. Not available for one-touch timer recording. Dubbing With this unit, you can enjoy bi-directional dubbing between HDD and DVD. HDD DVD High speed dubbing (HDD ➔ DVD only): This feature offers you the dubbing speed of 12 times the SLP mode dubbing at the maximum. Just dubbing (HDD ➔ DVD only): When dubbing from HDD to DVD, if you set the recording mode to “Auto”, the recording mode will automatically be adjusted so the titles will fit nicely in the remaining space of the disc. 8 E2H00UD.indd 8 HDD DVD Theater surround sound in your home: When connecting the unit to an amplifier or a decoder which is compatible with Dolby Digital, you can experience the theater surround sound from discs with surround sound system. Quick search for what you want to watch: You can easily find the part you want to watch using the search functions. You can search for a desired point by title, chapter or time. Virtual surround system: You can enjoy stereophonic space through your existing 2 channel stereo system. Variable skip: You can skip forward a certain time, which is specified in “Playback” menu in advance, with one-touch while playback. Variable replay: You can skip back a certain time, which is specified in “Playback” menu in advance, with one-touch while playback. HDD Time shift playback: You can play back a title being recorded from the beginning while recording continues. DVD Playing back MP3/JPEG/Kodak Picture CD files: You can enjoy MP3/JPEG/Kodak Picture CD files which are recorded on CD-RW/-R. Editing HDD DVD Deleting a title: You can delete a title which you do not need anymore. Putting names on titles: You can put your favorite names on titles. Setting / clearing chapter marks: You can set / clear chapter marks on titles. Dividing titles: You can divide a title into 2 or more. Deleting a scene of a title: You can delete a scene from a title as you like. HDD DVD Hiding chapters: To keep others from playing back some chapters without permission, you can hide chapters. Setting an Index Pictures: You can change pictures for an index. Putting name on disc: You can put your favorite disc name. EN 2007/05/11 10:15:06 FEATURES Introduction Compatibility Symbols Used in this Owner's Manual Others To specify for which media type each function is, we put the following symbols at the beginning of each item to operate. * DVD-RW/-R recorded in VR mode or non compatible recording format are not playable. * DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 90). * DVD-R recorded in the mode other than +VR is not recordable on this unit. Connections Available for playing back discs on a regular DVD player: Recorded discs can be played back on regular DVD players, including computer DVD drives compatible with DVD-video playback. Although DVD+R are playable on other units without finalization in most cases, it is recommended to finalize in order to stabilize the performance. For DVD-RW/-R, you need to finalize the recorded discs to play back on other DVD players. Symbol Description HDD DVD For Recording, Playing Back, and Editing Basic Setup Progressive scan system: Unlike conventional interlace scanning, the progressive scan system provides less flickering and images in higher resolution than that of traditional television signals. Description refers to HDD Description refers to DVD+RW Description refers to DVD+R Description refers to DVD-RW Recording Description refers to DVD-R For Playback only Description refers to DVD-video Description refers to audio CD Description refers to video CD without PBC function Playback Description refers to video CD with PBC function Description refers to CD-RW/-R with MP3 files Description refers to CD-RW/-R with JPEG files, including Kodak Picture CD files Editing If you do not find any of the symbols listed above under the function heading, the operation is applicable to all media. Function Setup Others Español EN E2H00UD.indd 9 9 2007/05/11 10:15:06 FUNCTIONAL OVERVIEW Front Panel 1 2 3* 4 14 5 6 7 8* 9 10 13 12 11 (*) The unit can also be turned on by pressing these buttons. 1. STANDBY-ON y button Press to turn the unit on and off. 2. Disc tray Place a disc when opening the disc tray. 3. OPEN/CLOSE A button* Press to open or close the disc tray. 4. Display Refer to “Front Panel Display” on page 14. 5. HDD button Press to select the HDD output mode. 6. DVD button Press to select the DVD output mode. 7. STOP C button Press to stop playback or recording. 8. PLAY B button* Press to start or resume playback. 9. RECORD I button Press once to start a recording. Press repeatedly to start one-touch timer recording. 10 E2H00UD.indd 10 10. CHANNEL / buttons Use to connect external device with a RCA audio cable. 11. AUDIO input jacks (E2) Use to connect external device with a RCA audio cable. 12. VIDEO input jack (E2) Use to connect external device with a RCA video cable. 13. S-VIDEO input jack (E2) Use to connect the S-video output of external device with an S-video cable. 14. Infrared sensor window Receive signals from your remote control so that you can control the unit from a distance. EN 2007/05/11 10:15:06 FUNCTIONAL OVERVIEW Introduction Rear Panel 1 2 IN 3 4 VIDEO VIDEO IN OUT L Y L PB/CB Connections OUT R ANTENNA AUDIO IN (E1) IN R S-VIDEO AUDIO OUT 11 10 9 8 OUT PR/CR COMPONENT VIDEO OUT COAXIAL S-VIDEO 7 6 DIGITAL AUDIO OUTPUT PCM/BITSTREAM 5 Recording 8. AUDIO OUT jacks Use to connect a TV monitor, AV receiver or other device with a RCA audio cable. 9. S-VIDEO IN jack (E1) Use to connect the S-video output of external device with an S-video cable. 10. AUDIO IN jacks (E1) Use to connect external device with a RCA audio cable. 11. ANTENNA OUT jack Use to connect an RF coaxial cable to pass the signal from the ANTENNA IN to your TV. Basic Setup Note • Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. • This unit does not have the RF modulator. Playback 1. ANTENNA IN jack Use to connect an antenna. 2. VIDEO IN jack (E1) Use to connect external device with a RCA video cable. 3. VIDEO OUT jack Use to connect a TV monitor, AV receiver or other device with a RCA video cable. 4. AC Power Cord Connect to a standard AC outlet to supply power to this unit. 5. DIGITAL AUDIO OUTPUT (COAXIAL) jack Use to connect an AV receiver, Dolby Digital decoder or other device with a digital audio coaxial input jack with a digital audio coaxial cable. 6. S-VIDEO OUT jack Use to connect the S-video input of a TV monitor, AV receiver or other device with an S-video cable. 7. COMPONENT VIDEO OUTPUT jacks Use to connect a TV monitor with component video inputs with a component video cable. Editing Function Setup Others Español EN E2H00UD.indd 11 11 2007/05/11 10:15:08 FUNCTIONAL OVERVIEW Remote Control Installing the Batteries in the Remote Control Install the batteries (AAAx2) matching the polarity indicated inside battery compartment of the remote control. 1 Open the cover. 2 Insert batteries. Using a Remote Control Keep in mind the following when using the remote control: • Make sure that there are no obstacles between the remote control and the infrared sensor window on the unit. • Remote operation may become unreliable if strong sunlight or fluorescent light is shining on the infrared sensor window of the unit. • Remote control for different devices can interfere with each other. Avoid using remote control for other device located close to the unit. • Replace the batteries when you notice a fall off in the operating range of the remote control. • The maximum operable ranges from the unit are as follows. - Line of sight: approx. 23 feet (7m) - Either side of the center: approx. 16 feet (5m) within 30° - Above: approx. 16 feet (5m) within 15° - Below: approx. 10 feet (3m) within 30° 16feet (5m) 30˚ Make sure to match + and - on the batteries to the marks indicated in the battery compartment. 3 Close the cover. 2 23feet (7m) 16feet (5m) 30˚ STANDBY-ON 1 18 DTV/TV SOURCE DISPLAY OPEN/CLOSE 3 A .@/: 4 ABC 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 5 6 7 . 20 0 DISC MENU SETUP o OK s B TITLE Note Incorrect use of batteries can result in hazards such as leakage and bursting. Please observe the following: • Do not mix new and old batteries together. • Do not use different kinds of batteries together. Although they may look similar, different batteries may have different voltages. • Make sure that the + and - ends of each battery match the indications in the battery compartment. • Remove batteries from battery compartment that is not going to be used for a month or more. • When disposing of used batteries, please comply with governmental regulations or environmental public instruction’s rules that apply in your country or area. • Do not recharge, short-circuit, heat, burn or disassemble batteries. 12 E2H00UD.indd 12 8 9 10 11 12 13 14 15 16 17 19* DEF RETURN p B j F i h g C 21 22 23 24* 25 26 27 CHANNEL -AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 28 29 30 31 33 32 34 EN 2007/05/11 10:15:08 FUNCTIONAL OVERVIEW Recording Playback Editing Function Setup Others Español EN E2H00UD.indd 13 Basic Setup 20. CLEAR button • Press to clear the information once entered, to clear the marker settings, or to cancel the programming for CD, etc. 21. SETUP button • Press to display the main menu. • During playback, press and hold for more than 3 seconds to switch the progressive scanning mode to the interlace mode. 22. Cursor K / L / { / B buttons • Press to select items or settings. 23. RETURN button • Press to return to the previously displayed menu screen. 24. PLAY B button* • Press to start playback or resume playback. 25. NEXT G button • During playback, press to skip to the next chapter, track or file. • When playback is in pause, press repeatedly to forward the playback step by step. 26. FFW D button • During playback, press to fast forward the playback. • When playback is in pause, press to slow forward the playback. 27. STOP C button • Press to stop playback or recording. • Press to exit from the title list. 28. DVD button • Press to select the DVD output mode. 29. TIMER button • Press to display the timer programming list. 30. REC MODE button • Press to switch the recording mode. 31. D.DUBBING button • During playback, press to start dubbing right away. • In stop mode, press to display “Dubbing” menu. 32. TIME SHIFT button (HDD) • Press twice to time shift recording you are watching. Press it again to continue watching it. 33. RAPID PLAY button • During playback, press to play back in a slightly faster/slower mode with keeping the audio quality. 34. V.SKIP button • Skips by the amount of time set in advance. Connections 1. DISPLAY button • Press to display the display menu on or off. 2. DTV/TV button • Press to switch between digital TV (DTV) mode and analog TV (TV) mode. 3. SOURCE button • Press to select the appropriate input. 4. Number/Character buttons • Press to select channel numbers. • Press to select a title/chapter/track/file on display. • Press to enter values for the settings in the main menu. • Press to enter title names. 5. Confirm ( • ) button Analog mode: • Press to confirm the channel selection made by [the Number buttons]. Digital mode: • Press to confirm the major / minor channel selection made by [the Number buttons]. 6. DISC MENU button • Press to display the disc menu. 7. OK button • Press to confirm or select menu items. 8. TITLE button • Press to display the title list. 9. PREV H button • During playback, press to return to the beginning of the current chapter, track or file. • When playback is in pause, press repeatedly to reverse the playback step by step. 10. REW E button • During playback, press to fast reverse the playback. • When playback is in pause, press to slow reverse the playback. 11. PAUSE F button • Press to pause playback or recording. 12. CHANNEL / buttons • Press to change the channel up and down. 13. HDD button • Press to select the HDD output mode. 14. AUDIO button • Press to switch the audio language for digital TV. • Press to display the audio menu during playback. 15. REPEAT button • Press to display the repeat menu. 16. REC I button • Press once to start a recording. • Press repeatedly to start the one-touch timer recording. 17. V. REPLAY button • Replays by the amount of time set in advance. 18. STANDBY-ON y button • Press to turn the unit on and off. 19. OPEN/CLOSE A button* • Press to open or close the disc tray. Introduction (*) The unit can also be turned on by pressing these buttons. 13 2007/05/11 10:15:10 FUNCTIONAL OVERVIEW Front Panel Display 2 1 PM 3 DTV BS CS DR CD VCR DB HDD DVD 4 5 1. PM 4. Current status of the unit : Appears in the afternoon with the clock display. : Appears when playback is paused. 2. DTV : Appears when playing back a disc. : Appears when the channel is in DTV mode. : Appears when the timer programming or OTR has been set and is proceeding. 3. Title / track / file and chapter mark : Appears when indicating a title / track / file number. 5. Displays the following • Elapsed playback time • Current title / chapter / track / file number • Recording time / remaining time • Clock • Channel number • Remaining time for one-touch timer recording : Appears during recording process. : Flashes when a recording pauses. : Appears when indicating a chapter number. : Appears when a disc is in this unit. DB : Appears during dubbing. HDD : Appears when the unit is in HDD mode. DVD : Appears when the unit is in DVD mode. Display Message Appears when the disc tray is opening. Appears when data is being written on a disc. Appears when the disc tray is closing. Appears when the PBC function is activated. (Video CD playback only. Refer to page 59.) Appears when a disc is loaded on the disc tray. 14 E2H00UD.indd 14 EN 2007/05/11 10:15:10 Introduction ANTENNA CABLE CONNECTION This section describes how to connect your unit to an antenna, cable box, etc. 1 2 Disconnect the power cord of your TV from the AC outlet. Disconnect RF coaxial cable from antenna input jack of your TV. Connections rear of your TV VHF / UHF antenna 2 1 disconnect disconnect or RF coaxial cable 3 ANT. IN Basic Setup cable TV company Connect cables to the unit. Make the basic connection as illustrated below. Recording VHF / UHF antenna rear of this unit VIDEO VIDEO IN OUT L L R RF coaxial cable AUDIO IN (E1) IN IN R S-VIDEO AUDIO OUT VIDEO OUT or L cable TV company OUT rear of your TV Playback RCA video cable R ANTENNA AUDIO OUT This connection is for TV loop through only RF coaxial cable RCA audio cable ANT. IN R L AUDIO IN Editing 4 VIDEO IN Plug in the power cord of this unit and your TV to the AC outlet. rear of your TV connect HDMI OUT L O OUTPUT TREAM rear of this unit *Once connections are completed, turn on the TV and begin initial setting. Channel scanning is necessary for the unit to memorize all available channels in your area. (Refer to “INITIAL SETTING” on page 25.) Function Setup Supplied cables used in this connection are as follows: • RF coaxial cable x 1 • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. Others Note EN E2H00UD.indd 15 Español • For your safety and to avoid damage to the device, please unplug the RF coaxial cable from the ANTENNA IN jack before moving the unit. • If you use an antenna to receive analog TV, it should also work for DTV reception. Outdoor or attic antennas will be more effective than set-top versions. • Antenna out is for tuner pass through only. HDD/DVD playback through the RF is not possible. 15 2007/05/11 10:15:11 RF MODULATOR CONNECTION If your TV has antenna in jack only, it is still possible to connect this unit to your TV by using a commercially available stereo audio/video RF modulator. In this case, follow the instructions below. 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Set your RF modulator’s channel 3/4 switch to either 3 or 4, whichever the TV channel is least used in your area. If your RF modulator has a modulator/antenna switch, set it according to the manual supplied with the RF modulator. 4) Plug in the power cords of the devices to the AC outlet. 5) Turn on your TV and choose the same channel as you set the RF modulator’s channel 3/4 switch to. For more details, follow the manual supplied with the RF modulator. VHF / UHF antenna rear of this unit IN VIDEO VIDEO IN OUT Y L OUT R ANTENNA RF coaxial cable AUDIO IN (E1) IN S-VIDEO AUDIO OUT IN COAXIAL DIGITAL AUDIO OUTPUT PCM/BITSTREAM VIDEO OUT or cable TV company OUT S-VIDEO RCA video cable L OUT rear of your TV R ANTENNA AUDIO OUT RCA audio cable ANT. IN rear of your RF modulator (not supplied) RF coaxial cable RF coaxial cable ANT. IN 3 4 CHANNEL R L AUDIO IN VIDEO IN TO TV Set channel 3 or 4 Supplied cables used in this connection are as follows: • RF coaxial cable x 1 • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. Note • RF modulator is not supplied with this unit. You need to purchase it at your local store. • The quality of picture may become poor if this unit is connected to an RF modulator. 16 E2H00UD.indd 16 EN 2007/05/11 10:15:12 1) Disconnect the power cords of the devices from the AC outlet. 2) Make the connection as illustrated below. 3) Plug in the power cords of the devices to the AC outlet. Introduction CONNECTION TO A CABLE / SATELLITE BOX e.g.) This connection is for TV loop through only VIDEO IN Connections rear of your TV satellite dish AUDIO IN R L or ANT. IN rear of this unit RF coaxial cable IN VIDEO VIDEO IN OUT RCA audio cable RCA video cable Basic Setup cable TV company Y PB/CB L OUT R RF coaxial cable IN ANTENNA AUDIO IN (E1) IN S-VIDEO AUDIO OUT /CR OUT S-VIDEO COAXIAL DIGITAL AUDIO OUTPUT PCM/BITSTREAM ANT. IN RF OUT AUDIO OUT R L VIDEO OUT S-VIDEO OUT VIDEO VIDEO IN OUT OUT L Y PB/CB ANTENNA R AUDIO IN (E1 L1) or L Recording cable/satellite box IN R S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT S-VIDEO RCA video cable Playback RCA audio cable S-video cable Editing Supplied cables used in this connection are as follows: • RF coaxial cable x 1 • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. Note Function Setup • Required cables and connecting methods differ depending on the cable/satellite box. For more information, please contact your cable/satellite provider. • Instead of using video out jack of this unit, you can also use S-VIDEO OUT jack or COMPONENT VIDEO OUTPUT jacks for connecting to your TV. With this setup: • You can record any unscrambled channel by selecting the channel on the cable/satellite box. Be sure that the cable/satellite box is turned on. • You cannot record one channel while watching another channel. Others • This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the National Electrical Code, which provides guidelines for proper grounding - in particular, specifying that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as possible. EN E2H00UD.indd 17 Español Note to CATV system installer 17 2007/05/11 10:15:13 CONNECTION TO A TV Make one of the following connections, depending on the capabilities of your existing device. analog audio TV Method 1 Method 2 Method 3 standard picture good picture better picture COMPONENT VIDEO IN S-VIDEO IN VIDEO IN AUDIO IN R Y L (Green) PB/CB (Blue) PR/CR (Red) RCA video cable and RCA audio cable this unit S-video cable or VIDEO VIDEO IN OUT (Green) Y PB/CB Y VIDEO OUT L L (Blue) L OUT R ANTENNA component video cable VIDEO OUT L IN or AUDIO IN (E1) IN R S-VIDEO AUDIO OUT R (Red) AUDIO OUT OUT R S-VIDEO AUDIO OUT AUDIO OUT VIDEO OUT S-VIDEO OUT PR/CR COMPONENT VIDEO OUT COMPONENT VIDEO OUTPUT Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. Note • Connect this unit directly to the TV. If the RCA audio/video cables are connected to a VCR, pictures may be distorted due to the copy protection system. • When “Progressive Scan” is set to “ON”, no video signal will be output from the VIDEO OUT or S-VIDEO OUT jack. To set progressive scan mode, refer to page 103 • This unit is compatible with the progressive scan system. The feature provides you with the higher quality images than the traditional output system does. To utilize this feature, you must set “Progressive Scan” to “ON”. 18 E2H00UD.indd 18 EN 2007/05/11 10:15:13 Introduction CONNECTION TO AN AUDIO SYSTEM • When you change the connections, all devices should be turned off. • Refer to the manual accompanying external devices for more information. 2 Channel Analog Audio Connection Digital Audio Connection stereo system Dolby Digital decoder, MD deck or DAT deck R Connections audio COAXIAL AUDIO IN L Basic Setup digital audio coaxial input jack analog audio input jacks digital audio coaxial cable RCA audio cable this unit Recording VIDEO OUT L VIDEO VIDEO IN OUT IN IN Y L PB/CB OUT OUT R ANTENNA VIDEO VIDEO IN OUT L L L AUDIO IN (E1) IN R S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT S-VIDEO R COAXIAL DIGITAL AUDIO OUTPUT ANTENNA PCM/BITSTREAM AUDIO IN (E1) IN R S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT COAXIAL S-VIDEO DIGITAL AUDIO OUTPUT COAXIAL PCM/BITSTREAM DIGITAL AUDIO OUTPUT R PCM/BITSTREAM AUDIO OUT Playback DIGITAL AUDIO OUTPUT AUDIO OUT Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 Please purchase the rest of the necessary cables at your local store. If output is Dolby Digital encoded audio, connect to a Dolby Digital decoder. Editing Connection Setting Setup >General Setting >Playback >Disc Audio > Dolby Digital Stream PCM If not connected to any external devices. PCM Function Setup Connecting to an MD deck or DAT deck. * To complete these settings, refer to page 98. Note Others • The audio source on a disc in a Dolby Digital multi channel surround format cannot be recorded as digital sound by an MD or DAT deck. • By connecting this unit to a Dolby Digital decoder, you can enjoy high-quality Dolby Digital multi channel surround sound as heard in the movie theaters. • Playing back a DVD using incorrect settings may generate noise distortion and may also damage the speakers. Español EN E2H00UD.indd 19 19 2007/05/11 10:15:14 BEFORE YOU START After you have completed all the connections, you must find the viewing channel (external input channel) on your TV. Finding the Viewing Channel on Your TV STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 DISC MENU SETUP 1 2 3 After you have made all the necessary connections, press [STANDBY-ON y] to turn on the unit. Turn on your TV. • If connected to your VCR make sure it is switched off or in standby mode before proceeding. Press “2” on the TV’s remote control, then press channel down button repeatedly until you see “Initial Setup” menu. o Initial Setup OK s B TITLE RETURN OSD Language p English Français Español B j F h i g C CHANNEL -AUDIO REC + HDD DVD This is the correct viewing channel (external input channel) for the recorder. • For some TVs, there may be a button on the TV’s remote control that accesses the external input channel. It may be labeled “SOURCE”, “AV”, or “SELECT”. In such case, press it repeatedly. Refer to your TV’s user manual for details. • If more than 10 minutes have past since you have turned on the unit, you may see the MAGNAVOX screen saver instead of “Initial Setup” menu. MAGNAVOX screen saver: TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Input Mode Names for Common TV Brands (Example) Admiral AUX Panasonic TV/VIDEO Curtis LINE1, LINE2, RCA INPUT, TV/VCR, Mathis 00, 90, 91, 92, 93 00, 90, 91, 92, 93 GE INPUT, TV/VCR, Samsung TV/VIDEO 00, 90, 91, 92, 93 Hitachi INPUT, AUX Sanyo VIDEO JVC VIDEO, VIDEO 1, Sharp 00 VIDEO 2, VIDEO 3 Kenwood AUX Sony VIDEO1, VIDEO2, VIDEO3 LXI-Series 00 Toshiba TV/GAME Magnavox AUX CHANNEL Zenith 00 4 Proceed to step 2 in “INITIAL SETTING” on page 25. Note • Video input selection varies for different brand’s models of TVs. • Consult your TV manufacturer if none of the above is successful. 20 E2H00UD.indd 20 EN 2007/05/11 10:15:14 BEFORE YOU START Guide to On-Screen Display / Menu HDD / DVD Information / Menu 6 Connections The on-screen display changes in the following order as you press [DISPLAY]. 7 OFF 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video DTV Program Guide (only in DTV mode) CH 10 2 5 3 5 4 5 KABC A Day of Memories 5 DTV 6.1 English 1/2 A quarter-century ago, which may now qualify as the good old days of newspapering, run-of-paper sales accounted for 80 percent of the industry's advertising revenues. : Search : Marker : Audio : Noise Reduction : Subtitle : Zoom : Angle : Surround : Repeat 6. Indicates the current title number/total number of titles, the current chapter number/total number of chapters, and time lapse of the current title playback/ total duration of the title. 7. Indicates the component in use. : HDD Others • When the program guide is displayed in more than 7 lines, use [K / L] to scroll. • “No description provided” is displayed when the program guide is not provided. 1. Indicates the file type or a disc type and format mode. (DVD mode only) 2. Indicates a channel number or selected external input channel. 3. Indicates the component in use, a recording mode and possible recording time left. The on-screen indication of the possible recording time left on HDD / DVD may differ from the actual recordable time as this unit employs the variable bit rate encoding system which varies the recording (storage) amount of data in conformity with the amount of information on the video. 4. Indicates an operation status. 5. Each icon means: Function Setup Note 3 * This is an example screen only for explanation. Displayed items may vary depending on the disc you insert. Editing 1. Broadcast station 2. Program title (max. 2 lines displayed) 3. Audio language (“Other” is displayed when the audio language cannot be acquired, or the acquired languages are other than English, Spanish or French.) 4. Program guide (max. 6 lines displayed) 5. Channel number 4 1h53m Playback 1 DVD SP 2 Recording DTV Program Guide 1 Basic Setup 5 HDD / DVD Information/Menu Title Name Information (only when DVD+RW/DVD+R/DVD-RW/DVD-R, or HDD is in playback) or File Name Information (only when a CD with MP3/JPEG/Kodak Picture CD files is in playback) Introduction This unit uses the following on-screen displays and menus to guide you to the easy operations. The on-screen displays give you the information on the loaded disc or the disc/file in playback, etc. The menus allow you to change the various kinds of settings for playing back, recording, or editing to suite your preference. : DVD Español EN E2H00UD.indd 21 21 2007/05/11 10:15:15 BEFORE YOU START Title/File Name Information Title Name Information Title Name My Title 1 File Name Information File Name My File 1 1. Displays title/file name. Main Menu Press [SETUP] to display the main menu. Then use [K / L] to select a menu and press [OK] to display the menu. These menus provide entries to all main functions of the unit. Setup 1 2 3 4 5 4 6 4 7 4 General Setting Timer Programming Title List Disc Edit HDD Menu Dubbing CD Playback Mode 1. General Setting: To go to general setting menu. 2. Timer Programming: To program a timer recording. 3. Title List: To call up the title list. 4. Disc Edit: To set up the DVD setting. 5. HDD Menu: To set up the HDD setting. 6. Dubbing: • To dub the content of the HDD to DVD or vice versa. • “Dubbing” is available only when a recordable disc is loaded. 7. CD Playback Mode: To set up the CD playback setting. • “CD Playback Mode” is available only when an audio CD, a video CD, a CD-RW/-R with MP3 / JPEG / Kodak Picture CD files is inserted into the unit. General Setting Menu 1 2 3 4 5 6 2 7 3 8 General Setting Playback Display Video Recording Clock Channel Reset All Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode Variable Skip / Replay 1. Playback: To set up the unit to play back discs as you prefer. 2. Display: To set up the OSD screen as you prefer. 3. Video: To set up the video setting. 4. Recording: To set up the unit to record to discs as you prefer. 5. Clock: To set up the clock of the unit as you need. 6. Channel: To adjust the channel setting of the unit as you prefer. 7. Reset All: To reset the setting to the factory default. 8. 22 E2H00UD.indd 22 :HDD :DVD Indicates the available mode for the selected function. EN 2007/05/11 10:15:15 BEFORE YOU START <Disc Edit menu (DVD+RW)> Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON <Disc Edit menu (DVD-RW)> Disc Edit 1 2 3 4 Edit Disc Name Erase Disc Finalize Disc Protect OFF ON Disc Edit 1 3 2 4 3 Edit Disc Name Finalize Disc Protect OFF ON <CD Playback Mode menu> Random Play Program Play PBC (Video CD only) Slide Show <HDD Menu> HDD Menu Delete All Titles Delete All Unprotected Titles <Dubbing menu> Dubbing 11 1 2 12 HDD DVD DVD HDD Playback 9 1 10 2 Recording CD Playback Mode 5 1 6 2 7 3 8 4 Basic Setup <Disc Edit menu (DVD+R/DVD-R)> Connections 1 2 3 4 Editing 1. Edit Disc Name: Allows you to rename the disc. 2. Erase Disc: (DVD+RW/DVD-RW only) Allows you to erase all contents in the disc and format it. 3. Make Edits Compatible: (DVD+RW only) Allows you to memorize the editing status on the disc if you have added or deleted chapters, or made chapters hidden on this unit, and to effect it when playing back on the other unit. Finalize: (DVD+R/DVD-RW/-R only) Allows you to finalize a disc containing recorded titles. 4. Disc Protect : Allows you to protect a disc from accidental editing or recording. 5. Random Play: Allows you to activate the random playback feature. 6. Program Play: (audio CD/video CD only) Allows you to activate the program playback feature. 7. PBC (Video CD only): Allows you to select images or information on the menu screen by activating PBC (playback control) function. 8. Slide Show: (JPEG / Kodak Picture CD files only) Allows you to select the display time of the slide show mode. 9. Delete All Titles: Allows you to delete all titles, including the protected titles, in the HDD title list. 10. Delete All Unprotected Titles: Allows you to delete all unprotected titles in the HDD title list. 11. HDD DVD: Allows you to dub from HDD to DVD. 12. DVD HDD: Allows you to dub from DVD to HDD. Introduction Disc Edit / HDD Menu / Dubbing / CD Playback Mode Function Setup Others Español EN E2H00UD.indd 23 23 2007/05/11 10:15:16 BEFORE YOU START Switching HDD / DVD Mode Because this unit is a combination of HDD and DVD recorder, you must first select which component (output mode) you wish to operate. HDD mode DVD mode Press [HDD] to activate the HDD component. Press [DVD] to activate the DVD component. STANDBY-ON DTV/TV SOURCE DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE . CLEAR 0 DISC MENU SETUP o OK s B TITLE RETURN p DVD button B j F i h HDD button g C CHANNEL -AUDIO REC + HDD DVD TIMER HDD button DVD button REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT How to Insert a Disc 1) Press [OPEN/CLOSE A] to open the disc tray. 2) Place the disc on the disc tray with its label side facing up. Align the disc to the disc tray guide. 3) Press [OPEN/CLOSE A] to close the disc tray. It may take a while to load the disc. To eject the disc: Press [OPEN/CLOSE A] to open the disc tray, then remove the disc before turning off the unit. • When inserting a brand-new DVD+RW/DVD-RW, the unit automatically starts to format. • If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list. 24 E2H00UD.indd 24 EN 2007/05/11 10:15:17 You need to follow these steps when you turn on this unit for the first time. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 Use [K / L] to select your desired language, then press [OK]. Initial Setup OSD Language English Français Español 0 DISC MENU SETUP o OK s B TITLE RETURN p Initial Setup Recording B j 3 Use [K / L] to select the type of broadcasting signal, then press [OK]. Channel Preset i Make sure the antenna is connected to “ANTENNA IN” jack. F h g C Antenna Cable (Analog) Cable (Analog / Digital) CHANNEL -AUDIO HDD DVD REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 1 Auto Presetting Now Entry screen for the clock setting will appear. Others 4 Proceed to step 5 in “Manual Clock Setting” on page 30. Function Setup CH Editing The unit will start getting channels available in your area. Antenna: (When using antenna) The channels broadcasted in analog TV and digital TV are automatically scanned and memorized. Only the receivable channels in the area will be memorized. Cable (Analog): (When using basic cable) The channels broadcasted in analog CATV are automatically scanned and memorized. Cable (Analog / Digital): (When using basic cable) The channels broadcasted in analog CATV and digital CATV are automatically scanned and memorized. TIMER Playback REC + Basic Setup . Connections A .@/: 1 2 Follow the procedure in “Finding the Viewing Channel on Your TV” on page 20 to display “Initial Setup” menu. Introduction INITIAL SETTING • If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” on page 29. Español EN E2H00UD.indd 25 25 2007/05/11 10:15:19 CHANNEL SETTING If you have changed antenna connection, we recommend that you program available channels in your area with the following procedures. Auto Channel Scan STANDBY-ON DTV/TV SOURCE DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 SETUP DISC MENU o OK s B RETURN TITLE p B j F i h g 1 2 3 4 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Channel”, then press [OK]. “Channel” menu will appear. Use [K / L] to select “Auto Channel Preset”, then press [OK]. Use [K / L] to select the type of broadcasting signal, then press [OK]. Auto Channel Preset Antenna Cable (Analog) Cable (Analog / Digital) C CHANNEL -AUDIO REC The unit will start getting channels available in your area. • When aerial antenna is connected, select “Antenna”. • When connected to CATV, select “Cable (Analog)” or “Cable (Analog/Digital)”. To cancel the auto channel preset during scanning: Press [RETURN] or [SETUP] to cancel. + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 5 When scanning is over, press [SETUP] to exit. To cycle through only the memorized channels, use [CHANNEL / ]. To select a channel directly (including the ones not memorized), use [the Number buttons]. Note • If the auto channel preset is canceled during presetting, some channels not yet preset may not be received. 26 E2H00UD.indd 26 EN 2007/05/11 10:15:20 CHANNEL SETTING STANDBY-ON DISPLAY OPEN/CLOSE A .@/: ABC DEF 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 SETUP DISC MENU o OK s B “General Setting” menu will appear. Use [K / L] to select “Channel”, then press [OK]. “Channel” menu will appear. Use [K / L] to select “Manual Channel Preset”, then press [OK]. Auto Channel Preset Manual Channel Preset TV Audio Select • If you are adding or deleting analog TV/CATV channels, go to to continue. ANALOG • If you are deleting digital TV/CATV channels, go to continue. to DIGITAL Playback RETURN TITLE p B j F i h g Recording 1 GHI Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Basic Setup DTV/TV SOURCE 1 2 3 4 Press [DTV/TV] to select the mode (DTV or TV) to/from which you want to add/delete channels. Connections You may want to add or delete TV channels if your channel lineup changes or if you no longer watch some channels. Adding channel is only available for the analog TV channels. Make sure • You perform “Auto Channel Scan” before adding or deleting the channels. Introduction Adding / Deleting Channels C CHANNEL -- REC HDD DVD TIMER Editing AUDIO + REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Function Setup Others EN E2H00UD.indd 27 Español Instructions continue on the next page. 27 2007/05/11 10:15:21 CHANNEL SETTING 5 6 ANALOG Select the channel number to add or delete. • Use [CHANNEL / ] to cycle through only the memorized channels. • Use [{ / B] to cycle through all the channels including the ones not memorized. • Use [the Number buttons] to select a channel directly. • When a memorized channel is selected, “Add” is checked and highlighted as a default. • When an unmemorized channel is selected “Delete” is checked and highlighted as a default. 5 Use [K / L] to select “Add” or “Delete”, then press [OK]. Manual Channel Preset CH 2 Add Delete 6 DIGITAL Select the channel number to delete. • Only the major channel is displayed in “Manual Channel Preset” menu. (The channel number displayed in the parenthesis is a virtual channel number) • Use [CHANNEL / ] to cycle through only the memorized channels. • You cannot use [{ / B] for the digital TV channel selection. • Use [the Number buttons] to select a channel directly. • When a memorized channel is selected, “Add” is checked and highlighted as a default. • When an unmemorized channel is selected “Delete” is checked and highlighted as a default. Use [K / L] to select “Delete”, then press [OK]. Then select the next channel to delete. • If the setting is complete, press [RETURN] to activate “Manual Channel Preset”. Manual Channel Preset Your setting will be activated and it will automatically switch to the next channel so that you can continue adding or deleting channels. 7 DTV 2 (CH - - - ) Add Delete Press [SETUP] to exit. Your setting will be activated. WARNING: • For the digital TV channels, you cannot recover the deleted channels once they are deleted unless you perform the auto channel preset again. 7 28 E2H00UD.indd 28 Press [SETUP] to exit. EN 2007/05/11 10:15:22 Introduction SETTING THE CLOCK Set the clock before you try the timer programming. If a PBS (public broadcasting station) is available in your area, follow “Auto Clock Setting” below. If not, follow “Manual Clock Setting” on page 30. Auto Clock Setting SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 5 6 TUV WXYZ 7 8 9 SPACE CLEAR . Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. Use [K / L] to select “Auto Clock Setting”, then press [OK]. Use [K / L] to select “Auto”, then press [OK]. Auto Clock Setting OFF Auto Manual 0 SETUP DISC MENU o B RETURN TITLE p B j F i h g C CHANNEL REC + HDD DVD This unit will search for the time only when the power is off. Leave it off for several minutes to give this unit time to set the clock. TIMER REPEAT REC MODE D.DUBBING I V.REPLAY Press [STANDBY-ON y] to turn off the unit. V.SKIP RAPID PLAY TIME SHIFT If the unit chooses an incorrect PBS channel, set the PBS channel manually by following the steps below. Use [the Number buttons] or [K / L] to enter your PBS channel number, then press [OK]. Set Channel No. CH Note 3 Press [SETUP] and turn off the unit. Español • The clock may set itself automatically after you connect the antenna/cable signal and plug in the power cord. • Only the analog PBS channel signal is effective for auto clock setting. • The unit receives the clock data at 12:00 a.m. / p.m. from the PBS channel when the power is off. 1 Others 1 2 Select “Manual” at step 4, then press [OK]. Function Setup EN E2H00UD.indd 29 Editing -- 5 6 Press [SETUP] to exit. Playback OK s AUDIO Recording 4 PQRS “General Setting” menu will appear. Basic Setup STANDBY-ON 1 2 3 4 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Connections This unit can set the time and date automatically by referring to a PBS station. Make sure • The antenna/cable TV connections are correct. • Channels are set. (Refer to page 26.) • If this unit is connected to a cable/satellite box, select the local PBS station on them to set the clock automatically. 29 2007/06/26 11:05:35 SETTING THE CLOCK Manual Clock Setting 1 2 3 4 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Daylight Saving Time When “Daylight Saving Time” is “ON”, the unit clock will automatically adjust the time in order to fit the daylight saving time. “ON (MAR - NOV)” has been selected as the default. “General Setting” menu will appear. Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. Use [K / L] to select “Clock Setting”, then press [OK]. Use [K / L] to select calendar or time, then press [OK]. Clock Setting JAN / 01 / 2007 ( MON ) 12 : 00 AM 5 Use [{ / B] to select an item to set, and use [K / L] to select the contents to suit your preference, then press [OK] when you finish setting all the contents. 1 2 3 4 “General Setting” menu will appear. Use [K / L] to select “Clock”, then press [OK]. “Clock” menu will appear. Use [K / L] to select “Daylight Saving Time”, then press [OK]. Use [K / L] to select “ON (MAR NOV)”, “ON (APR - OCT)” or “OFF”, then press [OK]. Daylight Saving Time ON (MAR - NOV) ON (APR - OCT) OFF ON (MAR - NOV): Move forward one hour on the second Sunday in March and move back one hour on the first Sunday in November. ON (APR - OCT): Move forward one hour on the first Sunday in April and move back one hour on the last Sunday in October. Clock Setting JAN / 01 / 2007 ( MON ) 12 : 00 AM Your setting will be activated. The clock start counting when you press [OK]. 6 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Press [SETUP] to exit. 5 Press [SETUP] to exit. Note • Your setting will be canceled if you press [RETURN] before pressing [OK] at step 5. • Your clock setting will be lost if either there is a power failure or this unit has been unplugged for more than 30 seconds when you set the clock manually. • For setting the day, year, hour, and minute, [the Number buttons] can also be used. • You can set the built-in calendar from the year 2007 up to 2056. 30 E2H00UD.indd 30 EN 2007/05/11 10:15:23 Switching Analog Mode / Digital Mode You can easily switch the analog TV (NTSC) and digital TV (ATSC) with the remote control. Note DTV 125. 1 Now Scanning Note [CHANNEL / Use [CHANNEL ] / ] to change the channel. NTSC (analog mode) [Air Time] ATSC (digital mode) 18:00 CH4-1 smallest smallest CH CH CH4-1 CH4 CH4-2 CH4-3 CH4-1 smallest CH CH4-3 Function Setup 18:30 19:00 19:30 CH4-1 20:00 Editing [the Number buttons] Press the channel number with [the Number buttons] to select a channel you want to watch. <Analog TV Channels> Enter the channel number with [the Number buttons] to select a channel you want to watch. For 1-digit number e.g.) 2 ch: [0] + [2], [2] + [•] or [2] + leave it for 2 seconds. For 2-digit number e.g.) 12ch: [1] + [2] What is the minor channel? By using high compression technology, digital broadcasting offers a service that enables multiple signals to send simultaneously. Therefore, you can select more than one program per major channel since digital broadcasting technology distinguishes between multiple channels broadcast by a signal network. Playback Select channels by using [CHANNEL / ] or [the Number buttons] found on remote control. About digital TV broadcasting: With its high definition broadcast, digital broadcasting far surpasses analog broadcasting in both its picture and sound quality. Recording • It may take up to 5 to 7 seconds to switch the digital TV channels. • In digital TV broadcasting, 2 or more channels, called minor channels, are simultaneously broadcast on one main channel, called major channel. Channel Selection Basic Setup • When you switch the analog mode to the digital mode, it may take about 10 seconds until the digital channel selection is completed. The following screen is displayed while switching the mode. Connections Press [DTV/TV] on the remote control. • The analog mode and digital mode switch alternately. <Digital TV Channels> Enter the major and minor channel number with [the Number buttons] to select a channel you want to watch. For 1-digit number e.g.) 2-2 ch: major channel [0] + [2] or [2] + [•] minor channel [0] + [2], [2] + [•] or [2] + leave it for 2 seconds. For 2-digit number e.g.) 35-16ch: major channel [3] + [5] minor channel [1] + [6] • If you enter 1 digit for major channel and leave it for 2 seconds, the number will be taken as the major channel and lowest minor channel of the major channel will be displayed. • If there is no minor channel input, lowest minor channel of the major channel will be displayed. Introduction TUNER SETTINGS CH4-2 smallest CH major channel minor channel / Others : change automatically : change manually by using [CHANNEL ] Español EN E2H00UD.indd 31 31 2007/05/11 10:15:23 TUNER SETTINGS This section describes how to switch the TV audio. When you record a TV program, only the audio selected here will be recorded. Selecting TV Audio Digital TV STANDBY-ON DTV/TV SOURCE DISPLAY OPEN/CLOSE 1 Press [AUDIO] to cycle through available audio languages. English 1/2 A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 DISC MENU SETUP o OK s B TITLE RETURN p B j F i h g C CHANNEL -AUDIO REC • When you press [AUDIO], selected language will be displayed on the TV screen. • Every time you press [AUDIO], the language will be switched. e.g.) English 1/3 ➔ Spanish 2/3 ➔ Other 3/3 • Available languages differ depending on the broadcast. • The language information display will automatically disappear. • When you record digital TV broadcasting, the audio language you have selected will be recorded. + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Note • You cannot change the audio language for the timer recording of digital TV broadcasting. • Pressing [AUDIO] does not control external device audio. • When there is only one audio channel on the broadcast, pressing [AUDIO] does not display anything. 32 E2H00UD.indd 32 EN 2007/05/11 10:15:24 TUNER SETTINGS Introduction Selecting TV Audio (cont’d) Analog TV STANDBY-ON DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 5 6 TUV WXYZ 7 8 9 SPACE CLEAR . 0 SETUP DISC MENU o OK s B RETURN p B j F i h g REC DVD TV Audio Select Stereo: Outputs main-audio. SAP (secondary audio program): Outputs sub-audio. TIMER REPEAT REC MODE D.DUBBING I V.REPLAY Use [K / L] to select “Stereo” or “SAP”, then press [OK]. Stereo SAP + HDD Use [K / L] to select “TV Audio Select”, then press [OK]. Playback AUDIO “Channel” menu will appear. C CHANNEL -- Use [K / L] to select “Channel”, then press [OK]. Recording TITLE “General Setting” menu will appear. Basic Setup 4 PQRS 1 2 3 4 V.SKIP RAPID PLAY TIME SHIFT Press [SETUP] to exit. Editing 5 Function Setup Note on recording analog TV audio • When you record an analog TV program available in second audio or stereo, you have to select either “Stereo” or “SAP” in “General Setting” menu beforehand. Refer to the following table to check an appropriate setting. Selected audio Broadcast audio Disc recording Audio output STEREO STEREO STEREO STEREO STEREO MONO+SAP MONO MONO MONO MONO MONO STEREO+SAP SAP SAP STEREO STEREO STEREO MONO+SAP SAP SAP MONO MONO MONO EN E2H00UD.indd 33 Español STEREO+SAP Others Stereo SAP Connections SOURCE Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. 33 2007/05/11 10:15:24 TUNER SETTINGS DTV Closed Caption Digital TV Digital TV has its own closed captions called DTV CC. Use this menu to change the settings for DTV CC. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 SETUP DISC MENU 1 2 3 o OK s B TITLE Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select “CC Style”, then press [OK]. OSD Language Screen Saver FL Dimmer CC Style V-Chip RETURN p B j F i h g C 4 AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY CC Style DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color CHANNEL -- Use [K / L] to select “DTV CC”, then press [OK]. V.SKIP RAPID PLAY TIME SHIFT 5 Use [K / L] to the desired DTV closed caption, then press [OK]. DTV CC OFF Service1 Service2 Service3 Service4 Service5 Service6 OFF: Select if you do not want DTV CC. This is the default. Service 1 to Service 6: Select one of these before changing any other item in the closed caption menu. Choose “Service 1” under normal circumstances. Note • Even if you set “DTV CC” to anything other than “OFF”, its effect will temporarily be canceled while recording. 34 E2H00UD.indd 34 6 Press [SETUP] to exit. EN 2007/05/11 10:15:25 TUNER SETTINGS Introduction Closed Caption Style Digital TV Digital TV can also change the style of its closed caption such as font, color or size, etc. SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 5 6 TUV WXYZ 8 9 SPACE CLEAR 7 . 0 SETUP DISC MENU o B RETURN p B j F i h g C AUDIO REC + HDD DVD OSD Language Screen Saver FL Dimmer CC Style V-Chip 4 5 Use [K / L] to select “ON”, then press [OK]. TIMER REPEAT REC MODE D.DUBBING V.SKIP RAPID PLAY TIME SHIFT CC Style DTV CC User Setting Font Size Font Style Edge Type Font Opacity Font Color Back Opacity Back Color Editing User Setting Function Setup Use [K / L] to select “CC Style”, then press [OK]. Use [K / L] to select “User Setting”, then press [OK]. I V.REPLAY Use [K / L] to select “Display”, then press [OK]. Playback CHANNEL -- “General Setting” menu will appear. Recording OK s TITLE Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Basic Setup 4 PQRS 1 2 3 Connections STANDBY-ON ON OFF Others EN E2H00UD.indd 35 Español Instructions continue on the next page. 35 2007/05/11 10:15:26 TUNER SETTINGS 6 Use [K / L] to select the item and switch the setting for each item you want to set, then press [OK]. <Font Color> Font color of the displayed caption can be switched as below. Font Color • When “User Setting” is set to “ON”, you can set the following items. CC style set by “User Setting” will be displayed. • The setting description for each item is shown below. Transparent White Black Red Green Blue Yellow Magenta Cyan <Font Size> Font size of the displayed caption can be switched as below. <Back Opacity> Background opacity of the displayed caption can be switched as below. Font Size Middle Large Small Back Opacity Solid Translucent Flash <Font Style> Font style of the displayed caption can be switched as below. <Back Color> Background color of the displayed caption can be switched as below. Font Style Style1 Style2 Style3 Style4 Style5 Style6 Style7 Style8 Back Color Transparent White Black Red Green Blue Yellow Magenta Cyan <Edge Type> Edge type of the displayed caption can be switched as below. Edge Type None Raised Depressed Uniform L.Shadow R.Shadow 7 Press [SETUP] to exit. <Font Opacity> Font opacity of the displayed caption can be switched as below. Font Opacity Solid Translucent Flash 36 E2H00UD.indd 36 EN 2007/05/11 10:15:26 Before you make a recording, read the following information. Recordable Discs Unrecordable Discs Logo Attributes • DVD-RW recorded in the mode other than +VR is not recordable on this unit unless you erase all contents in the disc (refer to page 90). • DVD-R recorded in the mode other than +VR is not recordable on this unit. Maximum recordable numbers of title / chapters HDD : DVD-RW DVD-R Recording DVD+R DVD : Basic Setup DVD+RW 8cm/12cm, single-sided, single layer disc Approx. max. recording time (SLP mode): 360 minutes (4.7GB) (for 12cm) 108 minutes (1.4GB) (for 8cm) 600 titles 99 chapters per title 49 titles per disc 254 chapters per disc 99 chapters per title Connections This unit can record to DVD+RW, DVD+R, DVD-RW and DVD-R. DVD+R/DVD-R can only be recorded to once. DVD+RW/ DVD-RW can be recorded to and erased many times. DVD-RW/-R will be recorded in the DVD+VR mode automatically in this unit. Introduction INFORMATION ON RECORDING Playback • Following discs are recommended for good recording quality and are proven to be compatible with this unit. However, depending on the media condition the unit may not read the disc properly. Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x Performance of any other discs are not guaranteed. • You can play back DVD+RW on most DVD players without finalizing. However, if you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” before being able to see those effects on other units. (Refer to page 91 for more details.) To play back discs other than DVD+RW on other DVD players, you will need to finalize. Editing Function Setup Others Español EN E2H00UD.indd 37 37 2007/05/11 10:15:27 INFORMATION ON RECORDING Recording Mode About HDD You can select a recording mode among 6 options, and the recording time will depend on the recording mode you select as follows. Disc size Recording mode 8cm Disc 12cm Disc HDD (Internal) Recording time HQ 18 min SP 36 min SPP 45 min LP 54 min Video/sound quality (good) EP 72 min SLP 108 min (poor) HQ 60 min (good) SP 120 min SPP 150 min LP 180 min EP 240 min SLP 360 min (poor) HQ 15 hrs (good) SP 30 hrs SPP 37.5 hrs LP 45 hrs EP 60 hrs SLP 90 hrs (poor) • The recording time is only an estimate. The actual recording time may differ. • The audio and video quality gets poorer as the recording time becomes longer. • Each time [REC MODE] is pressed, recording mode and its allowed recording time will be displayed. HDD is a special device which has high recording density and is suited for long-time recording or high-speed cueing but by contrast, has many factors which can cause breakage. Use HDD on the premise that you should dub the recorded programs to a DVD to protect your precious videos. HDD is a temporary storage location: HDD is not a permanent storage location of the recorded contents. Be sure to use it as a temporary storage location until you watch the programs once, edit them, or dub them to a DVD. Be sure to dub (back up) data promptly if you find abnormalities in HDD: If there is mechanical trouble with the HDD, grinding or other sounds may be heard or blocky noise may appear on the image. If you continue to use as it is, deterioration may continue and eventually the HDD may not be used at all. If you notice these symptoms of a failing HDD, promptly dub the data to a DVD. When an HDD fails, recovery of recorded content (data) may be impossible. About the remaining capacity of HDD recording time: The on-screen indication of the possible recording time left on HDD / DVD may differ from the actual recordable time as this unit employs the variable bit rate encoding system which varies the recording (storage) amount of data in conformity with the amount of information on the video. Before recording to the HDD, ensure there is sufficient space on the HDD by deleting unnecessary titles in advance. Note • This unit cannot record to CD-RW or CD-R. • All high definition pictures will be down converted to the standard definition pictures when they are recorded on this unit. • DVD+RW/+R, DVD-RW/-R and CD-RW/-R recorded on a personal computer or a DVD or CD recorder may not be played back if the disc is damaged or dirty or if there is condensation on the player’s lens. • If you record a disc using a personal computer, even if it is recorded in a compatible format it may not be played back because of the settings of the application software used to create the disc. (Check with the software publisher for more detailed information.) • Since the recording is made by the VBR (variable bit rate) method, depending on the picture you are recording, the actual remaining time for recording may be a little shorter than the remaining time displayed on the TV screen. • You cannot record copy-protected program using this unit. (Copy-protected signal is included in DVDvideo or some satellite broadcasts.) • You cannot record “copy-once only” program on DVD. 38 E2H00UD.indd 38 EN 2007/05/11 10:15:27 Make Recording Compatible Introduction BEFORE RECORDING Setting for Auto Chapter You can set a specified time for chapter marks. 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. 2) Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear. 3) Use [K / L] to select “Auto Chapter”, then press [OK]. 2) Use [K / L] to select “Recording”, then press [OK]. “Recording” menu will appear. 4) Use [K / L] to select a desired time option, then press [OK]. Basic Setup 1) Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Auto Chapter 3) Use [K / L] to select “Make Recording Compatible”, then press [OK]. Make Recording Compatible ON OFF ON: 5) Press [SETUP] to exit. 5) Press [SETUP] to exit. Note Playback OFF: Title list will be replaced when you make additional recordings to the discs recorded by other units. Prohibiting additional record to the disc that has a title list created by other units. Recording OFF 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes 4) Use [K / L] to select “ON” or “OFF”, then press [OK]. Connections Use this feature to make the unfinalized +VR mode discs recorded on other unit recordable on this unit. When you make an additional recording on this unit with “Make Recording Compatible” set to “ON”, the title menu is automatically converted to our style. • The interval for auto chapter marks may slightly differ. • A blank chapter may be created depending on the remaining time of the disc. Editing Function Setup Others Español EN E2H00UD.indd 39 39 2007/05/11 10:15:27 BASIC RECORDING & ONE-TOUCH TIMER RECORDING Follow the steps to record TV programs. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . If you are recording to the HDD, press [HDD] first, then proceed to step 2. If you are recording to a disc, press [DVD] first. 1 Insert a recordable disc (refer to page 24 on how to insert a disc). Align the disc to the disc tray guide. 0 DISC MENU SETUP * Make sure the disc is compatible with this unit. (Refer to page 37 for the list of compatible discs.) o OK s B TITLE It may take a while to load the disc. RETURN p B j F • When inserting a brand-new DVD+RW/DVDRW, the unit automatically starts to format. (Except when HDD is recording, or when there is a timer program which starts in 15 minutes.) • If titles have been recorded on the disc, the title list is displayed. Press [STOP C] to exit the title list. i h g C CHANNEL -AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 2 Press [REC MODE] to select a recording mode. Refer to “Recording Mode” on page 38. DVDSP 3 0h58m Select the appropriate external input channel by pressing [SOURCE] or [CHANNEL / ]. Press [DTV/TV] to select analog TV or digital TV, then use [CHANNEL / ] or [the Number buttons] to select a desired channel to record. Refer to “Switching Analog Mode/Digital Mode” and “Channel Selection“ on page 31. CH 12 40 E2H00UD.indd 40 EN 2007/05/11 10:15:28 BASIC RECORDING & ONE-TOUCH TIMER RECORDING 5 Introduction 4 Press [REC I] to start recording. “I HDD” or “I DVD” will be displayed for 5 seconds. e.g.) DVD Press [STOP C] to stop recording. As for DVD recording, the title list will appear automatically after writing to a disc complete. (Refer to “Guide to a Title List” on page 74.) e.g.) DVD+R Connections I DVD Press [PAUSE F] to pause recording. Press [PAUSE F]] or [REC I] again to restart recording. To set one-touch timer recording (OTR)... Writing to Disc 90% 1 I 0h30m 6h00m SP NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 0h30m 1h00m 2 Recording (normal recording) Basic Setup This is a simple way to set the recording time in blocks of 30 minutes. Press [REC I] repeatedly until the desired recording time (30 minutes to 6 hours) appears on the TV screen. One-touch timer recording will start. EMPTY TITLE 1:41:17 SP 5h30m • Press [STOP C] to exit the title list. Playback Editing To change the recording length during the onetouch timer recording: Press [REC I] repeatedly until the desired length appear. To cancel the one-touch timer recording within the specified time: Press [STOP C]. When the recording is completed, the unit will ask you whether to turn off the unit except under conditions listed below. - If a timer recording is programmed to start in 4 minutes. - During playback of HDD or DVD. - While displaying menus or information on the screen. • The unit will be turned off automatically if you select “Yes” or if you do not reply in 1 minute. Note • • • • Others • When you press [REC I], recording starts immediately and continues until the disc is full or you stop recording. This unit cannot record images as aspect ratio of 16:9. The 16:9 images will be recorded as 4:3. When the unit clock has not been set, the space for a date and time of title names will be blank. When you record a TV program, you have to select the TV channel audio beforehand. Only the selected channel audio will be recorded. Refer to “Selecting TV Audio” on pages 32-33 for more details. This unit cannot record in both stereo and SAP (secondary audio program) at the same time. You cannot change the recording mode during the recording pause mode. You can change a channel to be recorded during the recording pause mode. You can play back a title on one component while making a recording on other. To do so, simply select the component (HDD or DVD) you like to use for the playback by pressing [HDD] or [DVD] during HDD / DVD recording. And then follow the normal playback procedure. If playback and recording are in progress at the same time, select the appropriate component by pressing [HDD] or [DVD] before you press [PAUSE F] or [STOP C] to pause or stop the operation. Function Setup • • • • Note for one-touch timer recording EN E2H00UD.indd 41 Español • The remaining recording time will be displayed on the front panel display during one-touch timer recording. Press [DISPLAY] to see it on the TV screen. • Unlike the timer recording, you can perform the following operations during one-touch timer recording. - Turning off the power to stop one-touch timer recording. - Using [REC I] or [STOP C] on the remote control. • You cannot use the pause function during one-touch timer recording. 41 2007/05/11 10:15:30 TIMER RECORDING You can program the unit to record up to 36 programs within a month in advance. Daily or weekly program recordings are also available. Before recording, make sure • Set the clock before setting a timer programming. • If you are recording to a disc, insert a recordable disc with enough recordable space. Guide to Timer Programming Display 3 1 2 Timer Programming FEB/20/07 10:30 AM 125.1 SP SP (1:00) MON FEB/19 11:30AM Date FEB/20 Start End CH 10:30AM 11:30AM DTV125. 1 New Program 6 STANDBY-ON 1/1 SOURCE DTV/TV 4 DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 5 1 Title of a timer program (Contains date, time, channel, recording mode of the program) 2 Current date and time 3 Recording mode, and length of the recording 4 Timer program list 5 Total number of pages and current page (6 pages maximum) 6 Recording media SETUP DISC MENU o OK s B TITLE RETURN p B j F i h g C CHANNEL -AUDIO + HDD DVD 1 2 Press [TIMER]. Use [K / L] to select “New Program”, then press [OK]. Timer Programming MON FEB/19 11:30AM TIMER Date REC REPEAT REC MODE D.DUBBING Start End New Program CH I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 1/1 3 Use [K / L] to enter the date, then press [B]. Date FEB/20 CH DTV125. 1 Start --:-REC To HDD End --:-Mode SP SP JAN/01 p Daily p MON-SAT p MON-FRI Note p • If you have not set the clock yet: Entry screen for the clock setting will appear instead of the timer programming list at step 1. Continue with the step 4 in “Manual Clock Setting” on page 30 before setting a timer programming. • Use [s / B] to move the cursor to the left and the right in the entry screen for the timer programming. p 42 E2H00UD.indd 42 2h00m When pressing [L] at the current date, the date will change as follows. e.g.) January 1st SAT FRI p p p SUN JAN/31 EN 2007/05/11 10:15:30 TIMER RECORDING Date FEB/20 CH DTV125. 1 Start 10 : 30AM REC To HDD End --:-Mode SP 1h00m End 11 : 30AM Mode SP SP 1h00m e.g.) digital mode Start 10 : 30AM REC To HDD End 11 : 30AM Mode SP SP 1h00m e.g.) recording to DVD Start 10 : 30AM REC To DVD End 11 : 30AM Mode SP SP Start 10 : 30AM REC To DVD End 11 : 30AM Mode SP SP 1h00m When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and selects the best recording mode available automatically to complete recording the program. Date FEB/20 CH DTV125. 1 Start 10 : 30AM REC To DVD End 11 : 30AM Mode Auto Auto 1h00m • “Auto” is only available for one program in the timer program list. Alternate recording (DVD only)... If there is no recordable disc in the unit, if the disc does not have enough space to complete the recording, or if the material is “copy-once” program and prohibited to be recorded on a DVD, the unit will detect it and automatically record to the HDD even when DVD is selected as the recording media. If the available space on the HDD is less than that of DVD, the unit will not perform the alternate recording. This feature is available only for timer recording. Not available for one-touch timer recording. 8 Press [OK] when all items are entered. will appear on the front panel display. Function Setup Use [K / L] to select the recording media (“HDD” or “DVD”), then press [B]. Date FEB/20 CH DTV125. 1 Date FEB/20 CH DTV125. 1 Editing Date FEB/20 CH DTV125. 1 6 Refer to “Recording Mode” on page 38. • You can check the remaining recordable space of the disc when you select the recording mode. Timer Programming FEB/20/07 10:30 AM 125.01 SP SP (1:00) MON FEB/19 11:30AM Date FEB/20 Start End CH 10:30AM 11:30AM DTV125. 1 New Program 1h00m EN Español Your program setting is now stored. • To set another program, repeat steps 2 to 8. • To exit, press [TIMER] or [SETUP]. • When 2 or more programs are overlapped, “Timer program overlapped” appears, and the overlapped program will be displayed in blue. • To correct the timer program refer to “Checking, canceling, or correcting the timer programming information” on page 44. Others 1/1 E2H00UD.indd 43 Playback Start 10 : 30AM REC To HDD 1h00m Recording To record from external input (e.g., cable/ satellite box), select E1 or E2. Use [K / L] to select the channel number to record. For digital mode, select both major and minor channels. Refer to “How to select a channel number for the timer recording” on page 44 for more details. e.g.) analog mode Date FEB/20 CH 10 End 11 : 30AM Mode SP Auto recording mode select (DVD only)... End 11 : 30AM Mode SP SP Start 10 : 30AM REC To DVD Basic Setup e.g.) external input mode Start 10 : 30AM REC To HDD Date FEB/20 CH DTV125. 1 SP 2h00m Use [K / L / s / B] to select analog (“- - -”) / digital (“DTV”) mode or external input (E1 / E2), then press [B]. Date FEB/20 CH E1 Use [K / L] to select a recording mode. Connections SP 5 7 Introduction 4 Use [K / L / s / B] or [the Number buttons] to enter the start and end time, then press [B]. 43 2007/05/11 10:15:32 TIMER RECORDING How to select a channel number for the timer recording Analog TV For channel number 2-6 press, press [B] or [ • ] to decide the channels. For other channels (7-69), the channel will be decided as soon as you enter the channel number. Analog CATV For channel number 1-12 press, press [B] or [ • ] to decide the channels. For other channels (13125), the channel will be decided as soon as you enter the channel number. Digital TV For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99), the channel will be decided as soon as you enter the channel number. Digital CATV For channel number 1-13 press, press [B] or [ • ] to decide the channels. For other channels (14135), the channel will be decided as soon as you enter the channel number. minor channels For channel number 1-9 press, press [B] or [ • ] to decide the channels. For other channels (10-99), the channel will be decided as soon as you enter the channel number. <Hint> • You can decide the 1-digit channel number by pressing 0 first , then enter desired 1-digit channel number. e.g.) “5”: [0]+[5] • For selecting the channels with [K / L] you need to press [B] or [ • ] to decide the channel number. • For selecting the minor channels with [K / L], please make sure the minor channel your are selecting is existed. [K / L] does not skip the non-existed minor channels. To stop the timer recording in progress Press [STOP C] on the front panel of the unit to stop the timer recording in progress. [STOP C] on the remote control is not effective. If the timer program did not complete correctly, the error number appears in the timer programming list. Timer Programming Checking, canceling, or correcting the timer programming information FEB/20/07 10:30 AM 125.1 SP TUE FEB/20 1:00PM SP (1:00) 1) Press [TIMER]. 2) Check the information. E41 Date FEB/20 Start End CH 10:30AM 11:30AM DTV125. 1 New Program Timer Programming FEB/20/07 10:30 AM 125.1 SP MON FEB/19 11:30AM SP (1:00) Date FEB/20 Start End CH 10:30AM 11:30AM DTV125. 1 New Program 1/1 Each error number means: E1-22 Recording error other E42 E37-39 than below No disc when recording E24 E43 Already 49 titles recorded E25-26 Copy prohibited program E44 Already 254 chapters recorded E29 Disc protected E45 Copy prohibited program E30 Disc full E46 E35 PCA full *1 E36 Already finalized video format disc It is impossible to record additionally on a disc recorded by other units when setting “ Make Recording Compatible” to “OFF”. E40 Some portion has E47 not been recorded because of program overlapping. E49 Recording did not start at the start time. Already 600 titles recorded on the HDD Unrecordable disc 1/1 3-A) To delete the timer program: 1 Use [K / L] to select the program you want to delete, then press [OK]. 2 Use [K / L] to select “Delete”, then press [OK]. Confirmation window will appear. 3 Use [K / L] to select “Yes”, then press [OK]. 3-B) To correct the timer program: 1 Use [K / L] to select the program you want to correct, then press [OK]. 2 Use [K / L] to select “Program Change”, then press [OK]. 3 Correct the timer program by using [K / L / { / B], then press [OK]. 4) Press [TIMER] to exit. E41 Note • Press [TIMER] to check the timer recording in progress. • As to the timer recording in progress (which is shown in red in the timer program list), you only can edit the end time. The changes made during recording will be recognized as only specific to that recording in progress and it will not affect the daily or the weekly recording setting. 44 E2H00UD.indd 44 Power failed HDD recording is canceled due to the insufficiency of the disc space on the HDD. • E23, E27, E28, E31, E32, E33 and E34 are not displayed. • A program with the error number is grayed in the timer programming list. • Timer program with an error number will be cleared once the entry screen for the program is displayed. *1 PCA is a disc's space reserved for recording test. EN 2007/05/11 10:15:33 TIMER RECORDING Connections Basic Setup Recording • If there is a power failure or this unit has been unplugged for more than 30 seconds, the clock setting and all timer programming will be lost. • When recording to a DVD, if a disc is not inserted, the unit will perform the alternate recording to the HDD (refer to page 43). • When a timer recording is completed, the unit will ask you whether to turn off the unit if there is no timer recording which starts within 4 minutes, except under conditions listed below. - During playback of HDD or DVD. - While displaying menus or information on the screen. • The unit will be turned off automatically if you select “Yes” or if you do not reply in 1 minute. • When the programmed starting and ending time are earlier than the current time, the setting will not be accepted and be cleared for redoing. • If the starting time is earlier and the ending time is later than the current time, the recording will start right after you press [OK] at step 8 on page 43. • You cannot change the audio language for the timer recording of digital TV broadcasting. • Timer recording whose recording time exceeds 12 hours cannot be made. • It is prohibited to turn off the unit from 4 minutes before the programmed starting time. • It is prohibited to change channel from 15 seconds before the programmed starting time. • [REC I] does not work from 2 minutes before the programmed starting time. If it comes to 2 minutes before the starting time during regular or one-touch timer recording, the recording in progress will be stopped. • Playback of DVD is prohibited from 2 minutes before the programmed starting time when the recording media is DVD. If it comes to 2 minutes before the programmed starting time during DVD playback, the playback will be stopped. Introduction Hints for Timer Recording The Priority of Overlapped Settings Playback • Timer program which has the earlier start time will be placed first in the timer program list, and be given priority over the programs with the later start time when timer programs overlap. • When timer programs overlap, the first 2 minutes (at the longest) of the later recording will be cut off. • When 2 or more timer programs have the same start time, the program set first will be given priority. • A timer recording of lower priority will be canceled or start from the middle. • Check the overlapped timer programmings and change the priority if necessary. When the starting time is the same: A program set previously (PROG. A) has priority. Editing PROG. A PROG. B Function Setup actual PROG. PROG.AA PROG. B recording The first 2 minutes (at the longest) will be cut off. Note for DVD recording When the end time of the programming currently being recorded and the start time of the subsequent program are same: The beginning of the PROG. B may be cut off. PROG. A Others • When the recording time of 2 programs are overlapped, or the end time of a program and the start time of another program is the same, the first 2 minutes (at the longest) of the subsequent program will be cut off. • If the cut-off portion comes up to 3 minute or more, this program will be displayed with error number E40 in the timer programming list. PROG. B actual recording PROG. A PROG. B The first 2 minutes (at the longest) will be cut off. Español EN E2H00UD.indd 45 45 2007/05/11 10:15:33 SPECIAL RECORDING Time Shift Recording STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE With [TIME SHIFT], even if you leave your couch while you are watching TV through this unit, you can come back and watch the rest of the program from right where you left at any convenient time with just one touch of a button. A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 1 0 DISC MENU SETUP o OK s B TITLE RETURN p B j F 2 i h g C CHANNEL -AUDIO REC + HDD DVD When you leave the TV, press [TIME SHIFT] twice. With the first press, the unit will start recording the TV broadcast. With the second press, the unit will be in the pause mode as soon as it starts the time shift playback (refer to page 66). (It is as if you paused the live TV broadcast.) When you come back, press [TIME SHIFT] again. The pause mode will be canceled, and the playback will start from the point you pressed the button for the second time in step 1. • While viewing the recorded content, you can pause and resume the playback by pressing [TIME SHIFT]. Press Stop once to resume Live TV. Press Stop twice to stop TIME SHIFT MODE. TIMER TIME SHIFT MODE REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT [TIME SHIFT] Press Stop once to resume Live TV. Press Stop twice to stop TIME SHIFT MODE. TIME SHIFT MODE 3 Press [STOP C] once to resume live TV. Press [STOP C] twice to stop time shift mode. Note • If you press [TIME SHIFT] when the unit is in DVD mode, the output mode will automatically be switched to HDD, and the unit will start the time shift playback of the title being recorded. • You can also use the special playback functions such as [E], [D] etc. during time shift recording mode. • The programs you recorded with [TIME SHIFT] will not be stored in the title list. • [REC I] is invalid during time shift recording mode. • You can no longer fast forward the playback when it comes to a few second before the current recording point. • Time shift recording mode will stop not only when you press [STOP C] twice, but also when the disc runs out of space, when the recording time exceeds 12 hours, or when it comes to 2 minutes before timer recording. 46 E2H00UD.indd 46 EN 2007/05/11 10:15:34 SPECIAL RECORDING 2) Load the disc that includes a title to be overwritten. It takes a while to display the title list. 3) Press [REC MODE] to select a recording mode. Refer to “Recording Mode” on page 38. 4) Use [K / L] to select a title to be overwritten, then press [OK]. 1 SP 2) Use [K / L] to select “Play”, then press [OK]. Playback will start. 3) Press [PAUSE F] at the point from which you want to start overwriting. 4) Press [REC I]. “F I DVD”, display menu, channel, and the time lapse will be displayed as illustrated on the left. 5) Select the channel you want to record. (Refer to page 31 on how to select a channel.) Recording NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 You can overwrite the existing title from the selected position. 1) Follow the steps 1, 2 and 4 on the left. 6) Press [REC I] again. Overwriting recording starts. 2 NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 3 7) Press [STOP C] to stop recording. EMPTY TITLE 1:37:52 SP Playback This operation may take a while to be completed. 5) Use [K / L] to select “Overwrite”, then press [OK]. Play Edit Overwrite 1 SP NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 2 Note • Recording mode of the overwriting title is the same as that of the original (overwritten) title when overwriting in the middle of the title. • Title name will not be overwritten. Editing 6) Select the channel you want to record. (Refer to page 31 on how to select a channel.) e.g.) DVD+RW selected title number to be overwritten 1 1 Basic Setup Title list will appear. If the title list does not appear, press [TITLE]. Overwriting in the Middle of the Title Connections You can overwrite the existing title from the beginning. 1) Press [STANDBY-ON y]. Make sure that the TV input is set on the unit. Introduction Overwriting from the Beginning of the Title 0:01:00 +RW CH 12 DVD SP Function Setup F I DVD 2h00m 7) Press [REC I]. Overwriting recording starts. The elapsed-time counter starts running. Others 8) Press [STOP C] to stop recording. Title name is also overwritten. This operation may take a while to be completed. Español Note • The remaining recording time is displayed on the bottom right corner of the TV screen during overwriting. EN E2H00UD.indd 47 47 2007/05/11 10:15:34 SPECIAL RECORDING Hints for Overwriting When you overwrite on the unnecessary title, there were various circumstances such as follows. Please note that following cases only describe the overwriting without any recording mode discrepancy. To avoid accidental deletion please check if there is no important title after the overwriting point. When overwriting title is shorter than the existing title: (overwriting from the beginning of the title) overwrite recording : A 30 - 180 seconds will be cut off. after overwriting existing title : B title name : A title name : B When overwriting title is longer than the existing title: (overwriting from the beginning of the title) overwrite recording : A after overwriting existing title : B title name : A overwrite recording : A existing title : B 30 - 180 seconds will be cut off. after overwriting title name : A title name : C existing title : C When overwriting in the middle of the title: overwrite recording : A existing title : B 30 - 180 seconds will be cut off. after overwriting title name : B* title name : B *Overwritten section and the rest of the sections will have the same title name as the original existing title (B). Note • When a title name is overwritten, its index picture is also overwritten. • “Auto Chapter” interval time is reset at the overwriting start point. • A chapter mark is put the beginning of the overwrite title when overwriting in the middle of the title. 48 E2H00UD.indd 48 EN 2007/05/11 10:15:35 Introduction DUBBING Information on Dubbing You can dub the contents of the HDD to DVD or vice verse. Before you start dubbing, refer to page 37 to see the recording compatibility. Guide to Dubbing Menu Display HDD DVD 3000 MB 3 Dubbing List 2 Add Delete All Dubbing Start 4 1 2 3 4 5 Dubbing direction Dubbing menu Remaining recordable space Dubbing list Current page number / total number of pages 5 Recording Playback “Auto” When “Auto” is selected as a recording mode, the unit calculates how much time is available on the disc and selects the best recording mode available automatically. • “Auto” is available only when dubbing from HDD to DVD. • The recording may be cut short when the available recording space of the disc is too limited. Basic Setup 1/1 “High” This unit is compatible with the high speed dubbing from HDD to DVD. High speed dubbing offers you the dubbing speed of 12 times the SLP mode dubbing. To perform the high speed dubbing, set the recording mode to “High”. • Duration of high speed dubbing will vary depending on the recording mode or the title amount. • High speed dubbing is not available when; - recording mode is set to other than “High”. - dubbing from a DVD to the HDD. - there is not enough space in the disc. - duration of the title is more than 5 hours. • During dubbing (except for high speed dubbing), you only can use [STOP C] on the front panel, and any other buttons will be invalid. Connections 1 Recording Mode for Dubbing Note on dubbing Editing Function Setup • During normal dubbing, you can watch the playback picture of the title being dubbed (the audio cannot be changed). During high speed dubbing, however, the playback picture will not appear. • Dubbing of a “copy-once only” program is not possible with this unit. • If you stop the dubbing halfway, the contents will be dubbed up to the point where you stop the dubbing (except for the high speed dubbing). With high speed dubbing, nothing will be dubbed if you stop it halfway. • To stop the dubbing in progress, press [STOP C] on the front panel. Other modes Refer to page 38 for the information on other modes. Others Español EN E2H00UD.indd 49 49 2007/05/11 10:15:36 DUBBING Settings for an External Device Connect the external device properly to the unit by using input jacks either E2 (Front) or E1 (Rear). When connecting an external device of monaural output to this unit, use AUDIO L jack of E2 (Front). Use S-video or the RCA audio/video cables for this connection. or S-VIDEO OUT VIDEO OUT AUDIO OUT R L VIDEO OUT external device AUDIO OUT R L S-VIDEO OUT (camcorder, VCR etc.) S-video cable or RCA video cable RCA audio cable RCA video cable RCA audio cable S-video cable or Y VIDEO VIDEO IN OUT L L PB/CB or R AUDIO IN (E1 L1) E2 IN R S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT S-VIDEO E1 to E2 IN to E1 IN IN VIDEO VIDEO IN OUT L Y L PB/CB OUT R ANTENNA AUDIO IN (E1) IN R S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT S-VIDEO COAXIAL DIGITAL AUDIO OUTPUT PCM/BITSTREAM front of this unit Supplied cables used in this connection are as follows: • RCA audio cable (L/R) x 1 • RCA video cable x 1 Please purchase the rest of the necessary cables at your local store. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 SETUP DISC MENU o OK s B TITLE RETURN p B j rear of this unit 1 2 3 4 5 i Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Video”, then press [OK]. Submenu will appear. Use [K / L] to select “Video Input”, then press [OK]. Use [K / L] to select desired external input, then press [OK]. Video Input E1 (Rear) E2 (Front) Use [K / L] to select the input jack type to connect, then press [OK]. If you want to use VIDEO IN jack, select “Video In”. If you want to use S-VIDEO IN jack, select “S-Video In”. E1 (Rear) F h g C Video In S-Video In CHANNEL -AUDIO 50 E2H00UD.indd 50 + HDD DVD TIMER 6 Press [SETUP] to exit. EN 2007/05/11 10:15:36 DUBBING Before recording from an external device, refer to the instructions for the connection on page 50. If you are recording to the HDD, press [HDD] first, then proceed to step 2. If you are recording to a disc, press [DVD] first. SOURCE DTV/TV DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 DISC MENU 1 2 SETUP o B RETURN p B j F h g C CHANNEL -AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Refer to “Recording Mode” on page 38. Press [RECORD I] on the unit to start recording. Start playback on the external device to record from. Press [STOP C] on the unit to stop recording. This operation may take a while to be completed. Function Setup 1 1 6 Press [REC MODE] to select a recording mode. Editing • If the external device is connected to the rear of this unit, select E1. • If the external device is connected to the front of this unit, select E2. • You can also select E1 or E2 channel by using [the Number buttons]. e.g.) For E1, press [0], [0], [1]. Playback 3 4 5 6 i Select the appropriate external input channel (E1 or E2) by pressing [SOURCE] or [CHANNEL / ]. Recording OK s TITLE It takes a while to load the disc. Basic Setup .@/: Insert a recordable disc (refer to page 24 on how to insert a disc). Connections STANDBY-ON Introduction Recording from an External Device 4 Others Español EN E2H00UD.indd 51 51 2007/05/11 10:15:37 DUBBING Selected Title Dubbing Preparing for dubbing (HDD to DVD): • Insert a recordable DVD. Preparing for dubbing (DVD to HDD): • Insert a disc to be dubbed. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 1 2 Press [SETUP] in stop mode. Use [K / L] to select “Dubbing”, then press [OK]. Setup General Setting Timer Programming Title List Disc Edit 0 HDD Menu SETUP DISC MENU Dubbing o OK s B TITLE RETURN p B j F i h g C 3 CHANNEL -AUDIO REC DVD Use [K / L] to select “HDD then press [OK]. DVD”, DVD to HDD + HDD HDD to DVD Use [K / L] to select “DVD then press [OK]. TIMER HDD”, e.g.) HDD ➔ DVD REPEAT REC MODE D.DUBBING I V.REPLAY Dubbing V.SKIP RAPID PLAY TIME SHIFT HDD DVD DVD HDD 4 Use [K / L] to select “Add”, then press [OK]. HDD DVD 3000 MB Dubbing List Add Delete All Dubbing Start 1/1 • If you have registered any dubbing before, they will be listed in the dubbing title list. 52 E2H00UD.indd 52 EN 2007/05/11 10:15:39 DUBBING e.g.) HDD 8 Introduction 5 Use [K / L / s / B] to select a desired title, then press [OK]. Use [s / B] to select a desired recording mode, then press [OK]. HDD DVD Title List 1 2 Please select REC MODE. CH10 SP High 3 HQ SP SPP LP EP Dubbing Titles 4 5 Repeat steps 4 to 5 until you register all the titles to be dubbed. Yes No Dubbing will start. • It may take awhile to prepare for the dubbing. To stop the dubbing in progress: Press [STOP C] on the front panel. One-touch Dubbing... Function Setup Others With one-touch dubbing, you can start dubbing right away with just one touch. To dub the contents in a DVD which is finalized on other unit, use this function. During playback of the title you want to dub, press [D.DUBBING]. If you are playing back a DVD, DVD to HDD dubbing will start right away. If you are playing back HDD, HDD to DVD dubbing will start right away. • The dubbing will start from the beginning of the title being played back. • The unit will dub only the title being played back. • When dubbing from HDD to DVD, recording mode will automatically be set to “High” whenever the conditions are met (refer to page 49). Otherwise, the last selected recording mode will automatically be applied. To stop the dubbing in progress: Press [STOP C] on the front panel. Editing After adding all the titles you want, use [K / L] to select “Dubbing Start” in the dubbing menu, then press [OK]. Start Dubbing? Playback • To go back and forth between dubbing menu and dubbing list, use [s / B]. 9 Use [K / L] to select “Yes”, then press [OK]. Recording To delete a title: 1 Go to the dubbing list, then use [K / L] to select a title. Then press [OK]. 2 Use [K / L] to select “Delete”, then press [OK]. 3 Use [K / L] to select “Yes”, then press [OK]. To move a title: 1 Go to the dubbing list, then use [K / L] to select a title. Then press [OK]. 2 Use [K / L] to select “Move”, then press [OK]. 3 Use [K / L] to select a desired insert point, then press [OK]. To erase all the titles in the dubbing title list: 1 Use [K / L] to select “Delete All” in the dubbing menu, then press [OK]. 2 Use [K / L] to select “Yes”, then press [OK]. Final confirmation message will appear. 3 Use [K / L] to select “Yes”, then press [OK]. Basic Setup Confirmation message will appear. • Depending on the dubbing direction, the available recording mode varies. • When dubbing from HDD to DVD, you can select “High” to perform the high speed dubbing (refer to “Recording Mode for Dubbing” on page 49 for more details). The title is now registered in the dubbing list. 7 Auto 500 MB 3000 MB 6 1/6 6 SLP Connections ABCDE 12:00AM (10:00:00) JAN/ 1/07 Español EN E2H00UD.indd 53 53 2007/05/11 10:15:40 DUBBING One Title Dubbing (HDD to DVD only) This function lets you select one specific title from the title list for dubbing. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . DEF Preparing for dubbing: • Insert a recordable DVD. 1 2 3 0 DISC MENU SETUP o OK s RETURN p B F i h g C CHANNEL -AUDIO REC + HDD Use [K / L / s / B] to select a desired title to dub, then press [OK]. Use [K / L] to select “Dubbing”, then press [OK]. Resume Playback Play From Start Edit Title Delete Delete Multiple Titles Dubbing B TITLE j Press [HDD] first. Press [TITLE]. DVD TIMER REPEAT REC MODE D.DUBBING 4 Use [K / L] to select “Yes”, then press [OK]. Start Dubbing? Yes No Dubbing of the selected title will start. To stop the dubbing in progress: Press [STOP C] on the front panel. I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 54 E2H00UD.indd 54 EN 2007/05/11 10:15:40 To prevent accidental recording, editing or erasing the titles, you can protect them from “Disc Edit” menu. STANDBY-ON DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 9 CLEAR . Use [K / L] to select “Disc Protect OFF ON”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON 0 SETUP DISC MENU Use [K / L] to select “Disc Edit”, then press [OK]. Basic Setup 8 SPACE 7 Press [SETUP]. o OK s B RETURN p B F i h g C CHANNEL -- REC HDD DVD TIMER REPEAT REC MODE D.DUBBING 4 Protect this disc? Yes No Playback AUDIO + Use [K / L] to select “Yes”, then press [OK]. Disc is now protected. I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Recording TITLE j Connections DTV/TV SOURCE 1 2 3 Introduction PROTECTING A DISC This operation may take a while to be completed. Editing Function Setup Note Others To cancel the disc protection: • When you insert a disc protected with this unit, “Disc Protect ON OFF” will appear instead of “OFF ON” at step 3. Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect ON OFF Español To release the protect for the disc, select “Yes” at step 4. EN E2H00UD.indd 55 55 2007/05/11 10:15:41 PLAYING THE DISCS ON OTHER DVD PLAYERS Finalizing a Disc You will need to finalize DVD+R, DVD-RW or DVD-R to play them back on other DVD players. Finalizing may take several minutes up to an hour. A shorter recording period on the disc will require a longer time period for finalization. Do not unplug the power cord during finalization. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 1 2 3 4 Press [SETUP]. Use [K / L] to select “Disc Edit”, then press [OK]. “Disc Edit” menu will appear. Use [K / L] to select “Finalize”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. e.g.) DVD+R, DVD-R Finalize disc? Yes No 0 SETUP DISC MENU Finalizing will start. o OK s B Finalizing 90% RETURN TITLE p To cancel finalizing... B j F h i g C CHANNEL -AUDIO REC + HDD DVD (DVD-RW only) • To cancel finalizing at step 4, press [STOP C], select “Yes” with [K / L], then press [OK]. Finalizing is canceled and the unit will be in stop mode. TIMER Do you want to cancel ? REPEAT REC MODE D.DUBBING Yes No I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Finalizing Note • Once you have finalized a DVD+R/ DVD-R, you cannot edit or record anything on that disc. • There is no need to finalize DVD+RW. • When you insert a DVD-RW finalized with this unit, “Undo Finalize” will appear instead of “Finalize”. • If appears when pressing [STOP C], you cannot cancel finalizing because the finalizing has been in certain progress. • When selecting “No” and press [OK] or [RETURN], finalizing will be continued. • You cannot cancel finalizing the DVD+R/DVD-R once it has started. This operation may take a while to be completed. Disc Edit Edit Disc Name Erase Disc Undo Finalize Disc Protect ON OFF To release the finalizing for the disc, select “Undo Finalize” at step 3. * DO NOT power off during finalization, this will result in malfunction. 56 E2H00UD.indd 56 5% 5 Finalizing is completed. EN 2007/05/11 10:15:42 PLAYING THE DISCS ON OTHER DVD PLAYERS Introduction Auto Finalizing STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 o OK s RETURN p B i h g 5 C REC + HDD DVD Auto Finalize Disc Full End of Timer Rec Use [K / L] to select “ON”, then press [OK]. e.g.) “Disc Full” Disc Full Your setting will be activated. TIMER REPEAT REC MODE D.DUBBING I V.SKIP RAPID PLAY TIME SHIFT 6 Press [SETUP] to exit. Editing V.REPLAY Use [K / L] to select “Disc Full” or “End of Timer Rec”, then press [OK]. ON OFF CHANNEL -AUDIO Use [K / L] to select “Auto Finalize”, then press [OK]. Playback F “Recording” menu will appear. B TITLE j Use [K / L] to select “Recording”, then press [OK]. Recording SETUP DISC MENU “General Setting” menu will appear. Basic Setup .@/: 1 2 3 4 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Connections You can finalize discs automatically using this function. You can use this function to finalize discs after finishing all timer recordings and at the end of the disc space. Function Setup Others Español EN E2H00UD.indd 57 57 2007/05/11 10:15:43 INFORMATION ON PLAYBACK Before you play back DVD, read the following information. Playable Discs and Files Unplayable Discs This unit is compatible to play back the following discs. To play back a DVD, make sure that it meets the requirements for region codes and color systems as described below. You can play back discs that have the following logos will play back on the unit. Other disc types are not guaranteed to play back. Playable discs Logos DVD-video DVD+RW The following discs will not play back on this unit. • CD-ROM • Compact Disc-Interactive (CD-I) • DVD-RAM • Video Single Disc (VSD) • DVD-ROM • DVD-audio • Unfinalized disc • DVD contains MP3/JPEG and DVD or CD contains Windows Media™ Audio/DivX® files • DVD-R or DVD-RW recorded in VR mode or non compatible recording format On the following disc, the sound may not be heard. • Super audio CD - Only the sound on the CD layer can be heard. The sound on the high-density super audio CD layer cannot be heard. Color Systems DVD+R DVD is recorded in different color systems throughout the world. The most common color system is NTSC (which is used primarily in the United States and Canada). This unit uses NTSC, so DVD you play back must be recorded in the NTSC system. You cannot play back DVD recorded in other color systems. DVD-RW (Finalized video mode discs only) Region Codes DVD-R (Finalized video mode discs only) This unit has been designed to play back DVD with region 1. DVD must be labeled for ALL regions or for region 1 in order to play back on the unit. You cannot play back DVD that are labeled for other regions. Look for the symbols on the right on your DVD. If these region symbols do not appear on your DVD, you cannot play back the DVD in this unit. The number inside the globe refers to region of the world. A DVD labeled for a specific region can only play back on the unit with the same region code. CD-DA (audio CD) video CD CD-RW CD-R Playable files Media CD-DA MP3 CD-RW/-R JPEG is a trademark of DVD Format/Logo Licensing Corporation. 58 E2H00UD.indd 58 EN 2007/05/11 10:15:44 INFORMATION ON PLAYBACK DVD-video title 1 chapter 1 chapter 2 track 1 chapter 1 title 2 chapter 2 audio CD, video CD track 2 track 3 track 4 chapter 3 track 5 Basic Setup • PBC setting turns to “ON” when loading video CD with PBC function, thus, even after setting PBC to “OFF” and ejecting the video CD then reloading the video CD, this setting turns to “ON” automatically. • Some operations cannot be performed while PBC function is on. Cancel PBC function temporarily to perform those operations by following the instruction below. Hint for HDD / DVD Playback The contents of HDD / DVD are generally divided into titles. Titles may be further subdivided into chapters. Connections Note Introduction PBC (playback control) for Video CD You can select images or information on the menu screen by activating the PBC (playback control) function of the video CD. This unit conforms to ver.1.1 and ver. 2.0 of video CD standard with PBC function. Ver.1.1 (without PBC function): You can enjoy playback picture as well as music CD. Ver.2.0 (with PBC function): While using a video CD with PBC function, “PBC” appears on the TV screen. MP3, JPEG folder 1 file 1 folder 2 file 2 file 3 file 4 file 5 Recording 1) Press [SETUP]. 2) Use [K / L] to select “CD Playback Mode”, then press [OK]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select “PBC (Video CD only)”, then press [OK]. 4) Use [K / L] to select “ON” or “OFF”, then press [OK]. Your setting will be activated. Playback You can play back interactive software using menu screens. Refer to instructions in the video CD. Editing Function Setup Others Español EN E2H00UD.indd 59 59 2007/05/11 10:15:45 BASIC PLAYBACK Direct Playback If you are playing back the titles in HDD, press [HDD] first, then proceed to step 2. If you are playing back the titles in DVD, press [DVD] first. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC 1 2 3 GHI JKL MNO DEF 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 1 Align the disc to the disc tray guide. * Make sure the disc is compatible with this unit. (Refer to page 58 for the list of compatible discs.) 0 DISC MENU SETUP It may take a while to load the disc. o OK s B TITLE RETURN p B j F i h g C CHANNEL -AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY Insert a disc (refer to page 24 on how to insert a disc). 2 3 Press [PLAY B] to start playback. If you are playing back a DVD-video or video CD with PBC function, a menu may appear. Refer to “Using the Title / Disc Menu” on page 64. Press [STOP C] once to stop playback temporarily. • Refer to “Resume Playback” on page 65. V.SKIP RAPID PLAY TIME SHIFT Note • Some discs may start playback automatically. • You can select images or information on the menu screen by activating PBC (playback control) function (page 59). 60 E2H00UD.indd 60 EN 2007/05/11 10:15:45 BASIC PLAYBACK STANDBY-ON DTV/TV DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 DISC MENU SETUP o OK s 1 It may take a while to load the disc. 2 B RETURN • To exit the title list, press [STOP C]. • To resume the title list, press [TITLE]. p B j F i h g C CHANNEL -- REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY 3 Use [K / L // s / B] to select a desired title, then press [OK]. <HDD title list> Playback AUDIO For HDD, press [TITLE] to call up the title list. For DVD, the title list will automatically appear when you insert a disc. Otherwise, press [TITLE] or [DISC MENU]. Recording TITLE * Make sure the disc is compatible with this unit. (Refer to page 58 for the list of compatible discs.) Basic Setup .@/: Insert a disc (refer to page 24 on how to insert a disc). Connections SOURCE If you are playing back the titles in HDD, press [HDD] first, then proceed to step 2. If you are playing back the titles in DVD, press [DVD] first. Introduction Playback from the Title List Title List JAN/ 1/07 12:00AM CH10 SP 12:00AM (1:00:00) JAN/ 1/07 CH10 SP 1 2 3 4 5 6 V.SKIP RAPID PLAY TIME SHIFT Editing 1/6 <DVD title list> 1 SP Function Setup NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 2 NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 3 EMPTY TITLE 1:37:52 SP Others • For Video CD, when “PBC (Video CD only)” in “CD playback Mode” menu is set to “ON”, the video CD main menu will appear when inserting a disc. In such case, select a numbered menu with [the Number buttons]. • Press [G] (for HDD) / [B] (for DVD) to display the next page, and press [H] (for HDD) / [{] (for DVD ) to display the previous page. Note Instructions continue on the next page. EN E2H00UD.indd 61 Español • Some discs may start playback automatically. • You can also start playback by pressing [PLAY B] instead of [OK] at step 3. 61 2007/05/11 10:15:46 BASIC PLAYBACK Note for DVD title list If you want to see disc information, press [{ ] when the first page of the title list is displayed or press [ K ] when the first title is selected but not when “Play”, “Edit” or “Overwrite” is highlighted. e.g.) DVD+RW 4 Use [K / L] to select “Play” (for DVD), or select “Resume Playback” or “Play from Start” (for HDD), then press [OK]. e.g.) DVD Play Edit Overwrite No Disc Name 1 SP NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 2 Disc DVD+RW Total Titles 3 Disc Space Used 0:30:48 Disc Protect OFF Make Edits Compatible Needed NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 3 EMPTY TITLE 1:37:52 SP Playback will start. e.g.) DVD+R No Disc Name Disc DVD+R Total Titles 5 Disc Space Used 1:30:48 Disc Protect OFF Finalize Finalized 5 Press [STOP C] once to stop playback temporarily. • Refer to “Resume Playback” on page 65. 1. Disc name (Default “No Disc Name”) 2. Disc type (DVD+RW/DVD+R/ DVD-RW/DVD-R) 3. Total number of title (include “EMPTY TITLE”) 4. Total time of recorded disc space 5. Status of disc protection (“ON” is protected disc.) 6. Making edits compatible/finalize • When DVD+RW is inserted: If the disc needs to be set “Make Edits Compatible”, “Needed” is displayed. Otherwise, “Not Needed” is displayed. (Refer to page 91.) • When DVD+R, DVD-RW or DVD-R is inserted: If “Finalize” is done, “Finalized” is displayed. Otherwise, “Unfinalized” is displayed. 62 E2H00UD.indd 62 EN 2007/05/11 10:15:48 BASIC PLAYBACK Introduction Playing Back an Audio CD and a CD-RW/-R with MP3 / JPEG Files STANDBY-ON DISPLAY OPEN/CLOSE It may take a while to load the disc. A .@/: ABC 1 2 3 GHI JKL MNO DEF 5 6 TUV WXYZ 7 8 9 SPACE CLEAR . When an audio CD is inserted, track list will appear. When a CD-RW/-R with MP3/JPEG files is inserted, file list will appear. • To exit the track/file list, press [STOP C]. • To resume the track/file list, press [TITLE]. 0 DISC MENU SETUP o OK s B p F i h g C CHANNEL -- REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY File List V.SKIP RAPID PLAY TIME SHIFT <JPEG> • Upper limit : 6,300 x 5,100 dots. • Lower limit : 32 x 32 dots. • File size of image maximum : 12 MB. EN E2H00UD.indd 63 Español When selecting track/file: Playback will start. When selecting the folder (Not available for audio CD): The files in the folder will appear. Use [K / L] to select the file or folder you want to play back, then press [OK]. • Press [PLAY B], [OK] or [B] to move to any lower hierarchies. • Press [s] or [RETURN] to move back to the previous hierarchy. Hints for audio CD tracks and MP3 / JPEG files: . • Folders are shown by . • Audio CD tracks are shown by • MP3 files are shown by 3 . . • JPEG files are shown by • The system can recognize up to 255 folders, up to 99 tracks/999 files. • Letters of a file/folder name overflowing the given space will be displayed as “...”. Unrecognizable characters will be replaced with asterisks. • If there are no files in the folder, “No Files” will be displayed. It is recommended that files to be played back in this unit are recorded under the following specifications: <MP3> • Sampling frequency : 44.1 kHz or 48 kHz. • Constant bit rate : 112 kbps - 320 kbps Others • The audio source of MP3 files cannot be recorded as digital sound by an MD or DAT deck. • Files whose extension is other than “.mp3(MP3)” or “.jpg / .jpeg(JPEG)” will not be listed. • Some unplayable folders or files may be listed due to the recording status. • High-resolution JPEG files take longer to be displayed. • Progressive JPEG files (JPEG files saved in progressive format) cannot be played back on this unit. 1/ 2 Function Setup Note JPEG file1 JPEG file2 MP3 file1 MP3 file2 MP3 file3 MP3 file4 Editing A B 1 2 3 4 5 6 Playback AUDIO e.g.) Audio CD DISC NAME B j 2 Recording RETURN TITLE Use [K / L] to select a desired folder or track/file, then press [OK]. Basic Setup 4 PQRS * Make sure the disc is compatible with this unit. (Refer to page 58 for the list of compatible discs.) Connections DTV/TV SOURCE 1 Press [DVD] first. Insert a playable disc (refer to page 24 on how to insert a disc). 63 2007/05/11 10:15:48 BASIC PLAYBACK Playing Back an Audio CD and a CDRW/-R with MP3 / JPEG Files (cont’d) Kodak Picture CD The Picture CD is a service to convert photographs taken by a conventional film camera into digital data and write the data on a CD. You can enjoy picture images on the TV set by playing back the Picture CDs. For details of Kodak Picture CD, contact a shop that provides developing service of Kodak Inc. 1) Press [TITLE]. Picture CD Image 1 1 2 3 4 5 6 1/2 • To exit the Picture CD thumbnail List, press [TITLE] again or press [STOP C]. Arrow icons mean the title list includes a next or previous page. Use [{ / B] in the direction of the icon you wish to follow. You can also quick review the six thumbnails at once between the first and last pages by pressing [H / G]. 2) Use [K / L / { / B] to select a desired track to be played back, then press [PLAY B] or [OK]. An image will be played back from the selected track and go to the next one in turn. Using the Title / Disc Menu DVD or video CD with PBC function may contain a title list, which describes the contents of the disc, or a disc menu, which guides you through the available functions in the disc. Press [DVD] first. 1) Insert a disc (refer to page 24 on how to insert a disc). * Make sure the disc is compatible with this unit. (Refer to page 58 for the list of compatible discs.) It may take a while to load the disc. 2) Press [TITLE] or [DISC MENU] to call up the title list or disc menu. 3) Use [K / L / { / B] to make a selection, and then press [OK] to enable your selection. 4) Press [STOP C] to exit. Note • You can select a numbered menu with [the Number buttons] also. • Menus vary among discs. Refer to the information accompanying the disc for details. • [TITLE] or [DISC MENU] will not always be active with all DVD. • For video CD, when “PBC (Video CD only)” in “CD Playback Mode” menu is “ON”, the video CD main menu will appear when inserting a disc. 3) Press [STOP C] to stop playback. Notes on JPEG and Kodak Picture CD: • After track is displayed for 5 seconds or 10 seconds (set in the “Slide Show” on page 69) the display moves to the next track. During JPEG or Kodak Picture CD playback, press [B] or [{] to rotate a picture 90 degrees clockwise or counterclockwise respectively. (Not available when the display menu appears.) Pause 1) During playback, press [PAUSE F]. Playback will be paused. F 2) Press [PLAY B] to return to the normal playback. Note • On DVD, set “Still Mode” to “Field” in “Playback” menu if pictures in the pause mode are blurred. (Refer to page 99.) 64 E2H00UD.indd 64 EN 2007/05/11 10:15:50 Resume Playback Introduction SPECIAL PLAYBACK Note You can play back from where you stopped playing back the disc last. Resume ON During playback, you can skip forward or backward by the amount of time you set in “Playback” menu. To set the time amount, refer to “ 8 Variable Skip / Replay” on page 99. During playback, press [V.SKIP] if you want to skip forward. Press [V.REPLAY] if you want to skip backward. Recording For HDD: You can set a resume point per every title. For DVD+RW/+R, DVD-RW/-R, Video CD, Audio CD, MP3 files and JPEG files: You can set only one resume point per disc. Variable Skip / Variable Replay Basic Setup 2) Press [PLAY B]. In a few seconds, playback will resume from the point at which it stopped last. You can resume playback at the same point even if you turn off the unit (HDD/DVD only). To cancel the resume playback and start playing back the disc from the beginning, press [STOP C] again while the playback is stopped. Connections 1) During playback, press [STOP C]. The resume message will appear. • Forward/reverse speed will be indicated with icons as follows. forward (approx. speed) 2x: 20x: 40x: reverse (approx. speed) 5x: 20x: 40x: Note Fast Forward / Fast Reverse Playback Rapid Playback Playback • For MP3/JPEG files, playback will resume from the beginning of the file at which playback was stopped. • Some video CD with the PBC function resume playback from the beginning of the track. Rapid playback function is available only during playback. This function is available only on discs recorded in the Dolby Digital format, and plays back in a slightly faster/ slower speed while keeping the sound quality just as normal playback. Editing 1) During playback, press [RAPID PLAY]. 40x g h 20x g h 5x g h normal speed playback g h 2x g h 20x g h 40x Press [RAPID PLAY] once during playback. Plays back approximately at 0.8 times of normal playback. : B : Press [RAPID PLAY] twice during playback. Plays back approximately at 1.3 times of normal playback. B: Press [RAPID PLAY] 3 times to play back in normal speed. No effects. 2) Press [PLAY B] to continue the normal playback. Note Español • Audio (language) setting cannot be changed while using this mode. • This feature may not work at some point in a disc. • Audio is PCM during rapid playback mode except when using digital audio connection. • When using digital audio connection (COAXIAL), the LPCM sound (2 channel) will be output. EN E2H00UD.indd 65 Others For video CD, approximate forward/reverse speeds are 2x, 8x, 16x. For audio CD, MP3 files, approximate speed is fixed at / ). 8x with sound (indicated with 2) Press [PLAY B] to return to the normal playback. B Function Setup 1) During playback, press [D] or [E]. Every time you press [D] or [E], approximate speed will be changed as follows. Fast forward or fast reverse playback across titles (for HDD/DVD) or files (for MP3) is not possible. 65 2007/05/11 10:15:51 SPECIAL PLAYBACK Step by Step Playback Time Shift Playback 1) During playback, press [PAUSE F]. Playback will be paused and sound will be muted. 2) Press [G] repeatedly. Playback will advance one frame (or step) at a time when you press [G] with the sound muted. To play back step by step backward: Press [H] repeatedly. Every time you press the button, the playback will go backward by one frame. • Press and hold [H] / [G] to reverse / advance continuously. 3) Press [PLAY B] to continue the normal playback. Note • Only step by step forward playback is available for playing back video CD. You can play back a title being recorded from the beginning while recording continues. 1) During recording, press [PLAY B]. Playback of the title you are recording will start from the beginning. • Elapsed playback time will be displayed in the front panel display. 2) To stop the playback, press [STOP C] once. • The front panel display will switch back to show the elapsed recording time. Note • If you press [STOP C] twice, it will stop the recording. • You cannot use the OTR function during time shift playback. Simultaneous Playback and Recording Slow Forward / Slow Reverse Playback 1) During playback, press [PAUSE F]. Then press [ D] or [ E]. Every time you press [D] or [E], approximate speed will be changed as follows. (The sound will remain muted.) g 1/4x h g 1/8x h g 1/16x h g pause h g 1/16x h g 1/8x h To return to the normal playback, press [PLAY B]. Note 1/3x With regard to HDD, you can continue recording a program while playing back another title in the same component (HDD). To do so, press [TITLE] during recording and select a title you like to play back, and then press [PLAY B]. (You can also start the playback from the title list menu.) To playback a title being recorded while continuing to record, refer to “Time shift playback” above (available only with HDD). Note • Video CD, audio CD, MP3/JPEG files recorded on a disc can also be played back during HDD recording. • Forward/reverse speed will be indicated with icons as follows. forward (approx. speed) 1/16x: 1/8x: 1/3x: reverse (approx. speed) 1/16x: 1/8x: 1/4x: • Only slow forward is available when playing back video CD. 66 E2H00UD.indd 66 EN 2007/05/11 10:15:53 SPECIAL PLAYBACK Introduction Marker Setting Zoom 1) During playback, press [DISPLAY]. 1/ 5 1/ 5 0:01:00 / 1:23:45 , then press [OK] within 1 2) Use [{ / B] to select second or wait for 1 second to display the marker list. e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 3) Use [K / L] to select a desired zoom factor to zoom, then press [OK]. 1/ 5 1/ 5 0:01:00 / 1:23:45 3) Use [K / L] to select a desired marker number. When it reaches the desired point, press [OK]. × 1.2 × 1.5 × 2.0 1/ 5 1/ 5 Recording DVD Video 0:01:00 / 1:23:45 DVD Video 1 2 3 Zoom area will be displayed. 4) Use [K / L / { / B] to select a desired zoom position, then press [OK]. 4 5 6 ------------- The title (track) number and the time will be displayed. Editing 4) To return to the marker later: Use [K / L] to select the desired marker number, then press [OK]. Note Note Others • When selecting a smaller factor than the current one, the zoom area will not be displayed. • To exit the zoom menu, press [DISPLAY] again at step 1. • To cancel the zoom function, select “x1.0” using [K / L], then press [OK]. • You cannot slide the zoomed picture on some JPEG files. • To clear a marker, select the marker number to be cleared, then press [CLEAR]. • All markers will be erased when you operate these operations listed below. – opening the disc tray (CD/DVD only) – turning off the power (CD/DVD only) – make additional recording on the disc (DVD only) – editing any title (DVD only) – dividing the title (HDD only) – deleting a scene of the title (HDD only) • You can mark up to 6 points. • Marker setting is not available when you play back the video CD with PBC function. Function Setup Zoom playback will start. Playback Zoom menu will appear. There are four options (x1.0, x1.2, x1.5 and x2.0), these are displayed excluding the current zoom rate. Basic Setup DVD Video 1) During playback, press [DISPLAY]. Connections , then press [OK] within 1 2) Use [{ / B] to select second or wait for 1 second to display the selection menu. e.g.) DVD-video This feature allows you to assign a specific point on a title to be called back later. Español EN E2H00UD.indd 67 67 2007/05/11 10:15:55 SPECIAL PLAYBACK Repeat Playback Note Available repeat function may vary depending the discs. 1) During playback press [DISPLAY], then proceed to step 2), or press [REPEAT] then proceed to step 3). , then press [OK] within 1 2) Use [{ / B] to select second or wait for 1 second to display the selection menu. 1/ 5 1/ 5 0:01:00 / 1:23:45 • Point B for the repeat A-B playback should be set within the same title or track as point A. • To cancel the repeat playback, select “OFF” at step 3. The repeat setting will also be canceled when you stop playback. • You cannot select “Group” during the random playback. • Repeat playback is not available when you play back the video CD with PBC function. DVD Video Random Playback 3) Use [K / L] to select a desired repeat type, then press [OK]. e.g.) HDD/DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video OFF Title Chapter A–B 0:00:15 / 0:05:00 CD OFF Track All A–B Note e.g.) MP3/JPEG files 1/ 5 1) Press [SETUP]. 2) Use [K / L] to select “CD Playback Mode”, then press [OK]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select “Random Play”, then press [OK]. Random playback will start. e.g.) audio CD, video CD 1/ 5 You can play back a disc randomly instead of playing back in the original order. • To cancel random playback, press [STOP C] twice during random playback. “OFF” appears on the TV screen. • For video CD with PBC function, the PBC setting will be switched to off automatically when you start random playback. 0:00:15 MP3 OFF Track All Group The selected repeat playback will start. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Repeat Title Title (HDD/DVD only): The current title will be played back repeatedly. Chapter (HDD/DVD only): The current chapter will be played back repeatedly. All (DVD/audio CD/video CD without PBC function/ CD with MP3, JPEG): All titles in the media will be played back repeatedly. A-B (HDD/DVD/audio CD/video CD without PBC function only): Desired section can be played back repeatedly. 1) Use [K / L] to select “A-B”, then press [OK]. 2) Press [OK] at the desired starting point A. 3) Press [OK] at the desired ending point B. Track (audio CD/video CD without PBC function/ MP3 or JPEG files only): The current track or file will be played back repeatedly. Group (MP3/JPEG files only): The current folder will be played back repeatedly. 68 E2H00UD.indd 68 EN 2007/05/11 10:15:57 SPECIAL PLAYBACK Slide Show You can select the display time between 5 seconds and 10 seconds. 1) Press [SETUP]. 1) Follow steps 1 and 2 in “Random Playback” on page 68. 2) Use [K / L] to select “CD Playback Mode”, then press [OK]. “CD Playback Mode” menu will appear. 3) Use [K / L] to select the display time, then press [OK]. Basic Setup 3) Use [K / L] to select “Program Play”, then press [OK]. 2) Use [K / L] to select “Slide Show”, then press [OK]. Connections You can program the disc to play back in your desired order. Introduction Program Playback 4) Press [SETUP] to exit. 4) Use [K / L] to select a desired track, then press [OK] or [B]. Note CD Playback Mode -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Total Recording • Large-size JPEG files take a few moments to be displayed. Program Play -0:00:00 Playback Repeat this step until you program all the desired tracks. 5) Press [PLAY B]. CD Playback Mode Program Play 04 10 06 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- Total Editing 09 -0:31:07 Program playback will start. Function Setup Note Others • To erase tracks you selected, press [CLEAR] at step 4. • You can make program settings up to 50 tracks. • To cancel program playback, press [STOP C] twice during program playback. “OFF” appears on the TV screen. • Program information will be retained until you power off the unit or open the disc tray. • You may also select a desired track using [the Number buttons] at step 4. • For video CD with PBC function, the PBC setting will be switched to off automatically when you start program playback. Español EN E2H00UD.indd 69 69 2007/05/11 10:15:58 SEARCH Title / Chapter Search Track Search Using [H] / [G] Using [H] / [G] 1) During playback, press [G] to skip the current title or chapter and move to the next. The title or chapter will move forward by one at a time. • If there is no chapter in one title, the current title will be skipped. 1) During playback, press [G] to skip the current track/file and move to the next. The track/file will move forward one at a time. To go back to the beginning of the current track/file, press [H]. Press it repeatedly to go to the previous track/file. The track/file will move backward one at a time. To go back to the beginning of the current title or chapter, press [H]. Press it repeatedly to go to the previous title or chapter. The title or chapter will move backward one at a time. Note • With regard to HDD, chapter search using [H] / [G] is available only within the same title. Using [DISPLAY] 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select e.g.) audio CD 1/ 5 , then press [OK]. 0:00:15 / 0:05:00 CD Using [DISPLAY] 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select e.g.) DVD-video 1/ 5 e.g.) MP3 files , then press [OK]. 1/ 5 0:00:15 MP3 1/ 5 0:01:00 / 1:23:45 DVD Video The number next to The number next to will be highlighted. 3) Title: Use [K / L] or [the Number buttons] to enter a desired title number to search, then press [OK]. Title search will start. Chapter: for Press [B] to move to the number next to chapter. Use [K / L] or [the Number buttons] to enter a desired chapter number to search, then press [OK]. After the search, playback will start automatically. will be highlighted. 3) Use [K / L] or [the Number buttons] to enter a desired track/file number to search, then press [OK]. After the search, playback will start automatically. Note • During CD playback you can enter a track number directly using [the Number buttons] for track search without displaying the menu. • Track search is not available when you play back the video CD with PBC function. Note • In search mode display, total numbers of each search contents (title/chapter/time) are shown as a denominator. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video total number total time of titles of the title total number of chapters 70 E2H00UD.indd 70 EN 2007/05/11 10:15:58 SEARCH Introduction Time Search 1) During playback, press [DISPLAY]. 1/ 5 Connections , then press [OK]. 2) Use [{ / B] to select e.g.) DVD-video 1/ 5 0:01:00 / 1:23:45 DVD Video Basic Setup e.g.) audio CD 1/ 5 0:00:15 / 0:05:00 CD When time search is not available, counter are not displayed. Recording The number next to will be highlighted. To move to the number next to , press [B]. and time Playback 3) Use [K / L / { / B] or [the Number buttons] to enter a desired time to search, then press [OK]. After the search, playback will start automatically. Note • Time search is available only in the same track, file or title. • Time search is not available when you play back the video CD with PBC function. Editing Function Setup Others Español EN E2H00UD.indd 71 71 2007/05/11 10:16:00 SELECTING THE FORMAT OF AUDIO AND VIDEO You can select the format of audio and video as you prefer depending on the contents of the disc you are playing back. Switching Subtitles Switching Audio Soundtrack DVD-video may have subtitles in 1 or more languages. Available subtitle languages can be found on the disc case. You can switch subtitle languages anytime during playback. When playing back a DVD-video recorded with 2 or more soundtracks (these are often in different languages), you can switch them during playback. When playing back video CD, audio CD you can switch “L/R”(stereo), “L”(left) or “R”(right). 1) During playback, press [DISPLAY]. 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video 1/ 5 1/ 5 1) During playback press [DISPLAY], then proceed to step 2), or press [AUDIO] then proceed to step 3). 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. 0:01:00 / 1:23:45 DVD Video 3) Use [K / L] to select a desired audio soundtrack or audio channel, then press [OK]. For DVD-video • Audio soundtrack will switch. 3) Use [K / L] to select a desired subtitle language, then press [OK]. 1/ 5 1/ 5 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 1.Dolby Digital 5.1ch English 2.Dolby Digital 2ch English 0:01:00 / 1:23:45 DVD Video OFF 1.English Subtitle will be displayed in the selected language. When selecting “OFF”, subtitle will disappear. • If the title contains both main and sub audio, you can further select “L” (main), “R” (sub), or “L/R” (mixed of main and sub). For audio CD, video CD • Audio channel will switch. e.g.) audio CD Note 1/ 5 • Some discs will only allow you to change the subtitle from the disc menu. Press [TITLE] or [DISC MENU] to display the disc menu. • If a 4-digit language code appears in the subtitle menu, refer to the “LANGUAGE CODE” on page 109. 0:00:15 / 0:05:00 CD 1. L/R 2. L 3. R Note • Some discs will only allow you to change the soundtrack from the disc menu. Press [TITLE] or [DISC MENU] to display the disc menu. 72 E2H00UD.indd 72 EN 2007/05/11 10:16:01 SELECTING THE FORMAT OF AUDIO AND VIDEO 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video , then press [OK]. 2) Use [{ / B] to select e.g.) DVD-video 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video Basic Setup 1/ 5 Some DVD-video have scenes shot from 2 or more angles. Angle information should be on the disc case if the disc contains multi-angle scenes. 1) During playback, press [DISPLAY]. 1) During playback, press [DISPLAY]. 1/ 5 Switching Camera Angles Connections You can enjoy stereophonic virtual space through your existing 2 channel stereo system. Introduction Switching Virtual Surround System 0:01:00 / 1:23:45 DVD Video 1/ 5 1/ 5 0:01:00 / 1:23:45 Angle icon appears when a switching camera angle is available. Angle will switch each time you press [OK]. Recording 3) Use [K / L] to select “OFF”, “Type 1” or “Type 2”, then press [OK]. e.g.) DVD-video DVD Video OFF Type 1 Type 2 • Angle icon does not appear on the TV screen in a case you set “Angle Icon” to “OFF” in “Playback” menu. Refer to page 99. Playback OFF : no effect Type 1 : natural effect Type 2 : emphasized effect Note Reducing Block Noise Note • Select “OFF” in a case sound is distorted. • The setting will be kept even when the unit is turned off. This function reduces noise in the playback picture. 1/ 5 1/ 5 0:01:00 / 1:23:45 DVD Video 3) Use [K / L] to select a desired option, then press [OK]. 1/ 5 1/ 5 0:01:00 / 1:23:45 Function Setup 2) Use [{ / B] to select , then press [OK] within 1 second or wait for 1 second to display the selection menu. e.g.) DVD-video Editing 1) During playback, press [DISPLAY]. DVD Video OFF Type 1 Type 2 Others Your setting will be activated. OFF : When playing back titles with a few noises such as DVD-video. Type 1 : For the titles recorded in long time mode such as SLP mode. Type 2 : Same as type 1, only more effective. Español EN E2H00UD.indd 73 73 2007/05/11 10:16:02 INFORMATION ON EDITING Guide to a Title List Title list allows you to check the titles recorded on the HDD or the disc easily. You can choose a title to play back from this list and easily edit the titles as you prefer. Press [HDD], then press [TITLE]. Press [DVD], then press [TITLE]. HDD mode DVD mode 2 1 7 6 8 9 Title List JAN/ 1/07 12:00AM CH10 SP 12:00AM (1:00:00) JAN/ 1/07 1 4 2 5 1 SP CH10 SP NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 3 Play Edit Overwrite 6 2 NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 3 EMPTY TITLE 1:37:52 SP 1/6 3 4 5 4 7 11 10 e.g.) DVD +VR Edit 2 Title Delete Edit Title Name Chapter Mark Hide Chapter Index Picture Title Dividing NOV/22/07 11:35AM CH13 EP 0:00:59 16 15 14 1. Title name (editable): Recording date, time, channel and the recording mode will be assigned automatically as the title name until you edit it. 2. Title information: Time at which the recording of the title was started, duration of the title, date recorded, channel recorded, and the recording mode in which the title was recorded. 3. Title List: List of titles recorded on the HDD. Each title is indicated by its index picture. Following icons may be displayed on the index picture. : Indicating the title has never been played back yet. : Indicating the title is protected. : Indicating the title is a copy-protected title. I : If you call up the title list while recording, “I” will be displayed on the index picture of the title currently being recorded. 4. Arrow: Indicating there is a previous / next page. 5. Title list page number: Current page / total pages. 6. Title list: List of the titles recorded on the disc, and their information. 7. Arrow: Indicating there is a previous / next page. 8. Title information: On the first line, title name (editable) is displayed. On the second line, the length of the title is displayed. Empty title: The portion of the disc where there is no recordings are made. As for the empty title, available recording time by the selected recording mode is displayed on the second line. 74 E2H00UD.indd 74 13 12 9. Recording mode: Currently selected recording mode is displayed here. 10. Capacity indicator: Indicating the position and the amount of each title in the disc. The portion for the selected title is highlighted. • It may not indicate the precise capacity of the disc. • If the duration of a title is too short, it may not be reflected in the capacity indicator. 11. Index pictures: A cut from the recorded content is displayed here. 12. Submenu: Submenus for the selected menu are displayed here. 13. Title name (editable): If you do not name the title, the recorded date, time, channel, and the recording mode are displayed here. 14. Progress bar: Indicating the progress of the playback. 15. Preview window: Preview of the selected title is displayed here. 16. Playback status: Indicating the current playback status of the selected title. Press [STOP C] to exit the title list. EN 2007/05/11 10:16:04 INFORMATION ON EDITING Introduction Edit Menu Media Available Futures Putting names on titles HDD DVD ✔ ✔ ✔ Deleting selected titles ✔ Deleting a scene of a title ✔ Adding / deleting chapter marks ✔ Connections ✔ Deleting a title ✔ ✔ Hiding chapters ✔ Dividing a title ✔ ✔ *1 Basic Setup Protecting a title ✔ Setting an index picture ✔ Making edits compatible ✔ *2 Note Putting name on disc ✔ Setting or Releasing disc protect ✔ • Once you have finalized a DVD+R/ DVD-R, you cannot edit or record anything on that disc. ✔ : Available : Not available *1 : -RW/+RW discs only Recording Finalizing a disc *2 : +RW discs only How to Access the Edit Menu HDD DVD Press [DVD] first. 1) Press [TITLE]. 2) Use [K / L / { / B] to select a desired title, then press [OK]. 2) Use [K / L] to select a desired title, then press [OK]. Playback Press [HDD] first. 1) Press [TITLE]. SP 1 Title List JAN/ 1/07 12:00AM CH10 SP 12:00AM (1:00:00) JAN/ 1/07 1 NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 CH10 SP 2 2 3 Editing NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 3 4 5 6 EMPTY TITLE 1:37:52 SP 1/6 Function Setup 3) Use [K / L] to select “Edit”, then press [OK]. 3) Use [K / L] to select “Edit”, then press [OK]. Play Edit Overwrite Resume Playback Play From Start Edit Title Delete Delete Multiple Titles Dubbing SP 1 NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 2 NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 3 EMPTY TITLE 1:37:52 SP Others Edit 1 +VR Edit 1 Title Delete Edit Title Name Español Scene Delete Edit Title Name Chapter Mark Title Dividing Protect Chapter Mark Hide Chapter Index Picture Title Dividing JAN/ 1/07 12:00AM CH10 LP 0:02:59 NOV/21/07 11:00AM CH12 SP 0:00:59 E2H00UD.indd 75 EN 75 2007/05/11 10:16:05 EDITING Deleting a Title You can delete a title which you do not need anymore. Please be advised that the title once deleted cannot be brought back. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ If you are editing the titles on HDD, press [HDD] first. If you are editing the titles on DVD, press [DVD] first. 1 2 Press [TITLE]. Use [K / L / { / B] to select a desired title to delete, then press [OK]. If you are editing the titles on HDD, proceed to step 4. If you are editing the titles on DVD, proceed to step 3. HDD mode 8 9 Title List SPACE CLEAR Title 1 12:00AM (1:00:00) 7 . 0 DISC MENU JAN/ 1/07 CH10 SP 1 2 3 4 5 6 SETUP o OK s B TITLE RETURN 1/1 p DVD mode B j i 1 F h g SP C NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 CHANNEL -- 2 + NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 AUDIO REC HDD DVD TIMER 3 EMPTY TITLE 1:37:52 SP REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 3 Use [K / L] to select “Edit”, then press [OK]. Play Edit Overwrite 1 SP NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 2 NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 3 EMPTY TITLE 1:37:52 SP Note • For DVD+RW/DVD-RW, the available disc space will increase only when the last recorded title in the title list is deleted. For DVD+R/DVD-R, the disc space will not be affected. • Deleted part of the titles in the capacity indicator changes in color. • As for DVD+RW/DVD-RW if you delete the title, deleted title will be displayed as “EMPTY TITLE”. • For DVD, it may take a while to write the data to the disc after you press [OK] at step 5. 76 E2H00UD.indd 76 EN 2007/05/11 10:16:06 EDITING HDD mode Resume Playback Play From Start Edit Title Delete Delete Multiple Titles Dubbing 5 Use [K / L] to select “Yes”, then press [OK]. Final confirmation message will appear. Select “Yes”, then press [OK]. The title is now deleted. Connections Title List JAN/ 1/07 12:00AM CH10 SP 12:00AM (1:00:00) JAN/ 1/07 1 2 4 5 CH10 SP 3 DVD mode +VR Edit 1 Introduction 4 Use [K / L] to select “Title Delete”, then press [OK]. Title Delete Basic Setup Edit Title Name 1/1 Chapter Mark Hide Chapter Index Picture Title Dividing 1 SP EMPTY TITLE 0:21:14 SP NOV/21/07 11:00AM CH12 SP 0:00:59 Confirmation message will appear. 2 NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 3 Recording EMPTY TITLE 1:37:52 SP Playback Editing Function Setup Others Español EN E2H00UD.indd 77 77 2007/05/11 10:16:06 EDITING Deleting Selected Titles You can delete titles which you do not need anymore. Please be advised that the titles once deleted cannot be brought back. 3 Use [K / L] to select “Delete Multiple Titles”, then press [OK]. 4 Use [K / L / { / B] to select the title you want to delete, then press [OK]. STANDBY-ON DTV/TV SOURCE Resume Playback Play From Start Edit Title Delete Delete Multiple Titles Dubbing DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . Title List Title 1 12:00AM (1:00:00) 0 DISC MENU JAN/ 1/07 CH10 SP 1 2 3 4 5 6 SETUP o 1/1 OK s B TITLE Trash mark will appear indicating the title is marked for deletion. RETURN p B j F h 5 i g C CHANNEL -AUDIO + HDD DVD Repeat step 4 until you select all the titles you want to delete. Title List Title 1 12:00AM (1:00:00) TIMER REPEAT REC MODE D.DUBBING REC JAN/ 1/07 CH10 SP 1 2 3 4 5 6 I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 1/1 1 2 Press [HDD], then press [TITLE]. Use [K / L / { / B] to select any title, then press [OK]. E2H00UD.indd 78 Use [K / L] to select “Yes”, then press [OK]. Final confirmation message will appear. Select “Yes”, then press [OK]. Titles are now deleted. Title List Title 1 12:00AM (1:00:00) 1 JAN/ 1/07 2 CH10 SP 3 Title List Title 1 12:00AM (1:00:00) JAN/ 1/07 CH10 SP 4 1 2 3 4 5 6 1/1 78 6 7 Press [CLEAR]. Confirmation message will appear. 1/1 To remove the trash mark from the title: Select the title with the trash mark, then press [OK]. EN 2007/05/11 10:16:07 EDITING You can put title names on the titles and change the names from this menu. STANDBY-ON 4 Use [K / L] to select “Yes”, then press [OK]. +VR Edit - Edit Title Name Connections 1 Yes No SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . MY FAVORITE 0:00:59 The title name is now updated. 5 0 DISC MENU SETUP o OK s Press [RETURN] once or repeatedly to go back to the title list. For DVD, the data will be written onto the disc momentarily. B p B j F g Guide to Edit Title Name C Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. Select 123 @!? 0 <space> <space> 0 <space> Use [K / L] to select “Edit Title Name”, then press [OK]. 1 (*1) (*1) 1 ! ”# $ % & ’( ) *+,-./:;<=> ?@[]^_{|} e.g.) DVD 2 ABC abc 2 (*2) Edit 3 DEF def 3 (*2) 4 GHI ghi 4 (*2) 5 JKL jkl 5 (*2) 1 Title Delete Edit Title Name Chapter Mark Hide Chapter Index Picture Title Dividing NOV/21/07 11:00AM CH12 SP 0:00:59 +VR Edit - Edit Title Name 1 A B C a b c character set 1 2 3 @ ! MNO mno 6 (*2) PQRS pqrs 7 (*2) 8 TUV tuv 8 (*2) 9 WXYZ wxyz 9 (*2) *1 Press 1 , character set will be changed to the “ @!? ” mode automatically. *2 Press 2 to 9 , character set will be changed to the previous input mode automatically. • To delete letters, press [CLEAR] repeatedly. Holding [CLEAR] will delete all letters. • Use [s / B] to move the cursor to the left and right. • You can enter up to 30 letters. Others To enter a title name, follow the steps of “Guide to Edit Title Name” on this page. 6 7 Function Setup abc Press ? M 0:00:59 area for entering title names • Undefined letters in a title name are shown by “*”. If you delete them, adjoining letters may change to “*” or other. EN Español Note E2H00UD.indd 79 Editing ABC +VR 3 1) Use [K / L] to select a desired character set, then press [OK]. 2) Follow the list below, use [the Number buttons] repeatedly until the desired letter appears. When you finish entering a title name, press [OK]. Playback 1 2 h i Recording This operation may take a while to be completed. RETURN TITLE Basic Setup 1 GHI Introduction Putting Names on Titles 79 2007/05/11 10:16:08 EDITING Chapter Marks (Add) You can put chapter marks in each title. Once a chapter is marked, you can use it for the chapter search feature. STANDBY-ON DTV/TV SOURCE DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 DISC MENU SETUP o OK s B RETURN TITLE p B j F i h g To add a chapter mark: 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Play back the title up to the point where you want to set a new chapter mark. When it comes to the desired point, press [PAUSE F]. Use [K / L] to select “Add”, then press [OK]. e.g.) DVD +VR C Edit - Chapter Mark CHANNEL -AUDIO REC 1 HDD DVD Delete All Chapter TIMER 1/ 1 REPEAT REC MODE D.DUBBING NOV/21/07 11:00AM CH12 SP I V.REPLAY Add Delete + 0:00:59 V.SKIP RAPID PLAY TIME SHIFT 5 Use [K / L] to select “Yes”, then press [OK]. +VR Edit - Chapter Mark - Add 1 Yes No Chapter 1/ 1 F NOV/21/07 11:00AM CH12 SP Note for adding or deleting chapter marks • Maximum number of chapter marks in a title is 99 (for HDD/DVD) and the maximum number of chapter marks in total is no limit (for HDD) / 254 (for DVD). If the number of the chapter marks exceed the limit, you cannot add any more chapter marks. • Only with regard to DVD editing, you may not be able to add chapter marks depending on the duration of the title or the number of chapters. • Only with regard to DVD editing, remaining time of the disc may decrease when adding chapter marks or increase when clearing chapter marks depending on the recording time or edited contents. • When you search for a point at step 3, you can also use the special playback functions such as [G], [D] etc. 80 E2H00UD.indd 80 0:00:59 A new chapter mark is now added. To add more chapter marks, repeat steps 3 to 5. 6 Press [RETURN] once or repeatedly to go back to the title list. For DVD, the data will be written onto the disc momentarily. This operation may take a while to be completed. EN 2007/05/11 10:16:10 EDITING Introduction Chapter Marks (Delete) STANDBY-ON DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 9 CLEAR . 0 DISC MENU SETUP o OK s B RETURN TITLE p F Submenu will appear. Use [H] / [G] to go to the chapter with the chapter mark number you want to delete, then press [PAUSE F]. Chapter mark number is displayed on the preview screen. e.g.) DVD i +VR h g Recording B j Use [K / L] to select “Chapter Mark”, then press [OK]. Edit - Chapter Mark 1 C Add Delete Delete All CHANNEL -AUDIO Chapter + HDD DVD 2/ 2 TIMER REPEAT REC MODE D.DUBBING Playback NOV/21/07 11:00AM CH12 SP REC 0:00:59 I V.REPLAY Basic Setup 8 SPACE 7 1 2 3 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. Connections DTV/TV SOURCE To delete a chapter mark: V.SKIP RAPID PLAY TIME SHIFT Use [K / L] to select “Yes”, then press [OK]. +VR Editing 4 5 Use [K / L] to select “Delete”, then press [OK]. Edit - Chapter Mark - Delete 1 Yes No Function Setup Chapter 2/ 2 F NOV/21/07 11:00AM CH12 SP 0:00:59 The selected chapter mark is now deleted. To delete more chapter marks, repeat steps 3 to 5. For DVD, the data will be written onto the disc momentarily. This operation may take a while to be completed. Español Note • You cannot delete the chapter mark 1. EN E2H00UD.indd 81 Others 6 Press [RETURN] once or repeatedly to go back to the title list. 81 2007/05/11 10:16:10 EDITING Chapter Marks (Delete All) To delete all chapter marks: STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 DISC MENU SETUP o OK s B RETURN TITLE p B j 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. Use [K / L] to select “Chapter Mark”, then press [OK]. Submenu will appear. Use [K / L] to select “Delete All”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. +VR Edit - Chapter Mark - Delete All i 1 Yes No F h g C Chapter 2/ 2 CHANNEL -AUDIO + HDD DVD F NOV/21/07 11:00AM CH12 SP TIMER 0:00:59 REC REPEAT REC MODE D.DUBBING Final confirmation message will appear. Select “Yes”, then press [OK]. I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT All chapter marks are now deleted. +VR Edit - Chapter Mark 1 Add Delete Delete All Chapter 1/ 1 NOV/21/07 11:00AM CH12 SP 0:00:59 5 82 E2H00UD.indd 82 Press [RETURN] once or repeatedly to go back to the title list. Data will be written onto the disc momentarily. This operation may take a while to be completed. EN 2007/05/11 10:16:11 EDITING Introduction Dividing a Title You can divide one title into 2 new titles. SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 2 3 JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 DISC MENU SETUP o B RETURN p B j F When it comes to the desired point, press [PAUSE F]. Use [K / L] to select “Title Dividing”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. The title is now divided into 2 new titles, and it will go back to the title list automatically. Title name of the divided titles are identical, and index pictures are reset to the first scene at this point. i h g C REC Playback CHANNEL -AUDIO + HDD Recording OK s TITLE Play back the title up to the point where you want to divide the title. Basic Setup 1 GHI Connections STANDBY-ON 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Editing Function Setup Others Note Español • If an internal HDD or a DVD contains the maximum number of titles (HDD: 600, DVD+RW/-RW: 49), you cannot divide any titles. • With DVD+RW/-RW, you cannot divide the titles if the total number of chapters has already reached 254. • When you search for a point at step 2, you can also use the special playback functions such as [G], [D] etc. • For DVD, it may start writing data to the disc as you complete the editing procedure. EN E2H00UD.indd 83 83 2007/05/11 10:16:12 EDITING Deleting a Scene of a Title You can delete a specific part of a title. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 1 2 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. Use [K / L] to select “Scene Delete”, then press [OK]. Edit 1 Scene Delete Edit Title Name Chapter Mark Title Dividing Protect 0 DISC MENU JAN/ 1/07 12:00AM CH10 LP SETUP 1 : 25 : 47 o OK s B RETURN TITLE p B j F i h g 3 Play back the title up to the point where you want to set a start point for the scene to be deleted, then press [OK]. C Edit - Scene Delete CHANNEL -AUDIO REC 1 + HDD DVD TIMER Start End Preview Delete REPEAT REC MODE D.DUBBING I JAN/ 1/07 12:00AM CH10 LP V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 1 : 00 : 00 Start point is now set, and the highlight automatically moves to “End”. 4 Press [PLAY B] to start playback again. Play back the title up to the point where you want to set an end point, then press [OK]. Edit - Scene Delete 1 Start End Preview Delete JAN/ 1/07 12:00AM CH10 LP 1 : 15 : 00 End point is now set, and the highlight automatically moves to “Preview”. The portion for deletion is indicated in red in the progress bar at the bottom of the screen. Note • When you search for the start/end point at step 3/4, you can also use the special playback functions such as [G], [D] etc. 84 E2H00UD.indd 84 EN 2007/05/11 10:16:13 EDITING 7 Edit - Scene Delete 1 Yes No Connections Before and after 5 seconds of the deleted scene can be previewed every time you press [OK]. • If you are not satisfied with the result, use [K / L] to go back to “Start” or “End”, and try setting them again. • If you are satisfied with the result, proceed to step 6. Use [K / L] to select “Yes” then press [OK]. JAN/ 1/07 12:00AM CH10 LP 0 : 07 : 00 start point end point Recording 6 Use [K / L] to select “Delete” then press [OK]. 8 Press [RETURN] once or repeatedly to go back to the title list. Edit - Scene Delete 1 Basic Setup Final confirmation message will appear. Select “Yes” using [K / L] and then press [OK]. The selected scene is now deleted. Before editing Edited Introduction 5 With “Preview” highlighted, press [OK] to preview the result. Start End Preview Delete Playback JAN/ 1/07 12:00AM CH10 LP 1 : 40 : 00 Editing Function Setup Others Español EN E2H00UD.indd 85 85 2007/05/11 10:16:14 EDITING Protecting a Title To prevent the accidental editing, or erasing of the titles, you can protect them in “Edit” menu. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 1 2 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. Use [K / L] to select “Protect”, then press [OK]. Edit 1 Scene Delete Edit Title Name Chapter Mark Title Dividing Protect JAN/ 1/07 12:00AM CH10 LP 1 : 25 : 47 0 DISC MENU SETUP o OK s B RETURN TITLE 3 p F g -- REC ON JAN/ 1/07 12:00AM CH10 LP + DVD 1 : 25 : 47 TIMER The title is now protected. • If the title is already protected, “ON OFF” will appear instead. Press [OK], to release the title from protection. • The protected title will be marked with icon. REPEAT REC MODE D.DUBBING I V.REPLAY OFF C CHANNEL HDD Edit - Protect i h AUDIO ON” selected, press 1 B j With “OFF [OK]. V.SKIP RAPID PLAY TIME SHIFT 4 Press [RETURN] once or repeatedly to go back to the title list. 86 E2H00UD.indd 86 EN 2007/05/11 10:16:14 EDITING Introduction Hiding Chapters You can hide chapters from the title list. Hidden chapters are skipped during playback. SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 5 6 TUV WXYZ 8 9 SPACE CLEAR 7 . 0 DISC MENU SETUP o Submenu will appear. Use [H] / [G] to go to the chapter you want to hide, then press [PAUSE F]. Use [K / L] to select “Hidden”, then press [OK]. +VR Edit - Hide Chapter Hidden B Chapter RETURN TITLE Visible Recording 1 OK s 2/ 2 Visible p B j Basic Setup 4 PQRS Use [K / L] to select “Hide Chapter”, then press [OK]. Connections STANDBY-ON 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. i NOV/21/07 11:00AM CH12 SP 0:00:59 F h g C + AUDIO REC HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 5 Press [RETURN] once or repeatedly to go back to the title list. Data will be written onto the disc momentarily. This operation may take a while to be completed. 1 Hidden Others • ”Hidden” will be displayed in the preview window while previewing the hidden chapter. • When you make all chapters in the title “Hidden”, “Hidden” is displayed on an index picture of the title list. Function Setup Note Editing If you want hidden chapters to be “Visible”, select the chapter to be shown. Then use [K / L] to select “Visible” at the step 4 on this page. Data will be written onto the disc momentarily. After that, title list is displayed. Playback The chapter is now hidden. CHANNEL -- SP NOV/21/07 11:00AM CH12 SP NOV/21/07 0:20:44 2 NOV/22/07 11:35AM CH13 EP NOV/22/07 0:10:33 Español 3 EMPTY TITLE 1:37:52 SP EN E2H00UD.indd 87 87 2007/05/11 10:16:15 EDITING Setting an Index Picture You can set your desired scene as an index picture for each title. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 DISC MENU SETUP o OK s 1 2 3 4 Follow steps in “How to Access the Edit Menu” on page 75 to display “Edit” menu. Play back the title to find the scene you want to use as an index picture. When it comes to the desired point, press [PAUSE F]. Use [K / L] to select “Index Picture”, then press [OK]. Use [K / L] to select “Yes”, then press [OK]. +VR B Edit - Index Picture 1 Yes No RETURN TITLE p B j F i h g F NOV/21/07 11:00AM CH12 SP C 0:00:59 CHANNEL -AUDIO REC A new index picture is now set. + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 5 Press [RETURN] once or repeatedly to go back to the title list. Data will be written onto the disc momentarily. This operation may take a while to be completed. Note • If the selected picture for an index picture is overwritten, the index picture is reset to the first scene of the title. • When you search for the point at step 2, you can also use the special playback functions such as [G], [D] etc. 88 E2H00UD.indd 88 EN 2007/05/11 10:16:16 EDITING Introduction Putting Name on Disc Press [STOP C] if you are playing back a disc. You can put a name on the disc and change it from this menu. SOURCE DTV/TV DISPLAY OPEN/CLOSE A ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 o e.g.) DVD+RW Disc Edit A window for entering a title name will appear. B RETURN p +VR Edit Disc Name Recording OK s TITLE Use [K / L] to select “Edit Disc Name”, then press [OK]. Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON SETUP DISC MENU Use [K / L] to select “Disc Edit”, then press [OK]. Basic Setup .@/: 1 2 3 Connections STANDBY-ON Press [SETUP]. A B C B j i a b c No Disc Name 1 2 3 F h g C AUDIO REC Total Titles 3 Disc Space Used 0:30:48 Disc Protect OFF Make Edits Compatible Needed @ ! ? + HDD DVD 0:00:00 TIMER REPEAT REC MODE D.DUBBING I V.REPLAY DVD+RW Playback CHANNEL -- Disc V.SKIP RAPID PLAY TIME SHIFT When you finish entering a title name, press [OK]. Data will be written onto the disc momentarily. This operation may take a while to be completed. The disc name is now updated. Function Setup Use [K / L] to select “Yes”, then press [OK]. Editing 4 5 To enter a disc name, follow the steps of “Guide to Edit Title Name” on page 79. Others Español Note • You cannot select “Disc Edit” when finalized DVD+R or DVD-R is inserted. EN E2H00UD.indd 89 89 2007/05/11 10:16:17 EDITING Erasing Disc Press [STOP C] if you are playing back a disc. You can erase all titles on a disc. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 1 2 3 SETUP DISC MENU OK Use [K / L] to select “Disc Edit”, then press [OK]. Use [K / L] to select “Erase Disc”, then press [OK]. e.g.) DVD+RW Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON o s Press [SETUP]. B TITLE RETURN p B j F i h g C CHANNEL -AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 4 Use [K / L] to select “Yes”, then press [OK]. When you press “Yes”, all the contents in the disc will be erased. Are you sure to erase the disc? Yes No Data will be written onto the disc momentarily. This operation may take a while to be completed. The contents of the disc is now deleted. Note • When you select “Yes” at step 4, all contents of the disc will be erased. 90 E2H00UD.indd 90 EN 2007/05/11 10:16:18 EDITING Introduction Making Edits Compatible STANDBY-ON DTV/TV SOURCE DISPLAY OPEN/CLOSE A ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE . 1 2 3 Press [SETUP]. 4 Use [K / L] to select “Yes”, then press [OK]. CLEAR 0 Use [K / L] to select “Disc Edit”, then press [OK]. Basic Setup .@/: Press [STOP C] if you are playing back a disc. Use [K / L] to select “Make Edits Compatible”, then press [OK]. Disc Edit Edit Disc Name Erase Disc Make Edits Compatible Disc Protect OFF ON Recording SETUP DISC MENU o OK s B TITLE Connections If you have added or deleted chapters, or made chapters hidden, you must perform “Make Edits Compatible” to see those effects on other unit. RETURN p B j h g C CHANNEL -AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING Activate the Make Edits Compatible? Yes No Playback F i Data will be written onto the disc momentarily. I V.SKIP RAPID PLAY TIME SHIFT This operation may take a while to be completed. Editing V.REPLAY Function Setup Others Español EN E2H00UD.indd 91 91 2007/05/11 10:16:18 EDITING Deleting All Titles in HDD Press [STOP C] if you are playing back a disc. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 SETUP DISC MENU o OK s 1 2 3 B TITLE Press [SETUP]. Use [K / L] to select “HDD Menu”, then press [OK]. Use [K / L] to select the desired type of deletion, then press [OK]. Select “Delete All Unprotected Titles” if you want to delete only the unprotected titles. Select “Delete All Titles” if you want to delete all titles including the ones protected. RETURN HDD Menu p B j F Delete All Titles Delete All Unprotected Titles i h g C CHANNEL -AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 4 Use [K / L] to select “Yes”, then press [OK]. Delete entire titles? Yes No Final confirmation message will appear. Select “Yes”, then press [OK]. Titles are now deleted. 92 E2H00UD.indd 92 EN 2007/05/11 10:16:19 The following table is the contents which you can set and the default setting. Refer to the following table for useful operation. Setup Playback Pages 96-99 Items (highlight is the default) Parental Lock Disc Audio PCM Dolby Digital Disc Menu Language Subtitle Language Still Mode OSD Language General Setting Screen Saver FL Dimmer CC Style DTV CC Pages 34-36 OFF Service1 Service2 Service3 Service4 Service5 Service6 ON OFF Set the type of the DTV closed caption. Middle Large Small Set font size of the displayed caption. Set the whether or not CC style setting is effective. Español Font Size Set the brightness of the front panel display. Others User Setting Set the idling time before the screen saver starts. EN E2H00UD.indd 93 Function Setup Français Español OFF 5minutes 10minutes 15minutes 30minutes Auto Bright Dark Editing Display Pages 100-101 Playback Variable Skip / Replay Recording Angle Icon Basic Setup Audio Language Connections Dynamic Range Control Contents Set the parental level for DVD playback. OFF level 8 [Adult] to 1 [Kid Safe] Compressing the range of sound volume. ON OFF Set whether the sound recorded in 96kHz will 48kHz be down sampled in 48kHz. 96kHz PCM Set the type of sound signal which outputs from the digital audio output jack. Stream Set the language for disc menu language. English French Spanish Other Set the language for audio. Original English French Spanish Other Set the language for subtitles. OFF English French Spanish Other Set whether or not to display the angle icon. ON OFF Set the type of still image in pausing playback. Auto Field Frame Variable Skip Set the amount of skip time when you press 5 seconds [V.SKIP]. 15 seconds 30 seconds 1 minute 5 minutes Set the amount of rewind time when you Variable Replay press [V.REPLAY]. 5 seconds 15 seconds 30 seconds 1 minute 5 minutes Set the language for OSD (on-screen display). English Introduction LIST OF SETTINGS 93 2007/05/11 10:16:20 LIST OF SETTINGS Setup Display Pages 100-101 Items (highlight is the default) CC Style Font Style Pages 34-36 Edge Type Font Opacity Font Color General Setting Back Opacity Back Color V-Chip00 Video Pages 102-103 Progressive Scan TV Aspect Video Input Page 50 E1(Rear) E2(Front) Recording Auto Chapter Page 39 Auto Finalize Page 57 Disc Full Style1 Style2 Style3 Style4 Style5 Style6 Style7 Style8 Contents Set font style of the displayed caption. None Raised Depressed Uniform L.Shadow R.Shadow Solid Translucent Flash Transparent White Black Red Green Blue Yellow Magenta Cyan Solid Translucent Flash Transparent White Black Red Green Blue Yellow Magenta Cyan Set edge type of the displayed caption. Downloadable Rating Change Password ON OFF Set the downloadable rating. 4:3 Letter Box 4:3 Pan & Scan 16:9 Wide Video In S-Video In Video In S-Video In OFF 5 minutes 10 minutes 15 minutes 30 minutes 60 minutes ON OFF Set the font opacity of the displayed caption. Set the font color of the displayed caption. Set back opacity of the displayed caption. Set back color of the displayed caption. Set to the progressive scan mode (set to "ON") or to the interlace scan mode(set to "OFF"). Set a picture size according to aspect ratio of your TV. Set the video input type for the external input. Insert chapter marks at even time interval. Set the unit to finalize the disc automatically. End of Timer Rec ON OFF Make Recording Compatible Page 39 94 E2H00UD.indd 94 ON OFF Set to prohibiting additional recording (OFF) or to replace the title list after recording (ON). EN 2007/05/11 10:16:20 LIST OF SETTINGS Items (highlight is the default) Clock Setting Auto Clock Setting Channel Pages 26-28 Auto Channel Preset Manual Channel Preset TV Audio Select Page 33 Reset All Page 104 Antenna Cable (Analog) Cable (Analog/Digital) Set the clock for the daylight saving time. Tune the channels automatically. Tune the channels manually. Set the analog TV audio type for output and recording. Set to the default setting. Basic Setup Stereo SAP Yes No Contents Set the clock. Set the clock automatically. Connections General Setting Daylight Saving Time OFF Auto Manual ON(MAR-NOV) ON(APR-OCT) OFF Introduction Setup Clock Pages 29-30 Note • Your change to each settings stays on even when the power is off. • An item which is not currently available is grayed in the settings. Recording Playback Editing Function Setup Others Español EN E2H00UD.indd 95 95 2007/05/11 10:16:20 SETUPS Playback STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 Press [STOP C] if you are playing back a disc. 1 2 Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. “General Setting” menu will appear. Use [K / L] to select “Playback”, then press [OK]. General Setting Playback Display Video Recording Clock Channel Reset All SETUP DISC MENU o OK s B TITLE RETURN p B j F i h g C CHANNEL -AUDIO REC + HDD DVD TIMER 3 REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Use [K / L] to select a desired item, then press [OK]. 1 2 3 4 5 6 7 8 Parental Lock Disc Audio Disc Menu Language Audio Language Subtitle Language Angle Icon Still Mode Variable Skip / Replay Submenu will appear. 96 E2H00UD.indd 96 4 5 Refer to 1 to 8 on pages 97-99 and set the selected item. When you finish with setting, press [SETUP] to exit. EN 2007/05/11 10:16:20 SETUPS Introduction Playback (cont’d) 1 Parental Lock (Default: OFF) (DVD only) Parental Lock If a password has not been set yet, proceed to A . If a password has been set already, proceed to B . Yes No Password Input Yes Your setting will be activated. B A password has been set already. • Use [the Number buttons] to enter the current password. Password Input Your setting will be activated. • If you want to change password, use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password, then press [OK]. <change the password> Change Password? Yes No Password Input Yes Your setting will be activated. Editing Note • Press [CLEAR] to erase numbers entered incorrectly. • When you forget the password or you want to clear all settings in “Parental Lock” menu, enter 4,7,3,7 using [the Number buttons] in password input window. Password will be cleared and parental levels will be set to “OFF”. Playback • Parental lock function may not be available to some discs. • With some DVD, it may be difficult to find if they are compatible with parental lock. Be sure to check if the parental lock function operates in the way that you have set. • Record the password in case you forget it. • If there is a DVD in the unit when you set up the parental lock, press [OPEN/CLOSE A] to activate the parental lock level. Change Password? Recording Note Use [K / L] to select “Yes”. Use [the Number buttons] to enter a new password except for 4737, then press [OK]. Basic Setup OFF 8 [Adult] 7 [NC 17] 6 [R] 5 [PG R] 4 [PG 13] 3 [PG] 2 [G] 1 [Kid Safe] A password has not been set yet. Connections Some DVD-video feature a parental lock level. Playback will stop if the ratings exceed the levels you set, it will require you to enter a password before the disc will playback. This feature prevents your children from viewing inappropriate material. Use [K / L] to select the desired level, then press [OK]. A Function Setup Others Español EN E2H00UD.indd 97 97 2007/05/11 10:16:21 SETUPS Playback (cont’d) 2 C Disc Audio Choose the appropriate audio setting for your external device. It will only affect a disc playback. Use [K / L] to select a setting, then press [OK]. Dolby Digital PCM Stream Use [K / L] to select a desired item, then press [OK]. Disc Audio A B C A Dynamic Range Control PCM Dolby Digital Dynamic Range Control (Default : ON) (DVD only) Set to “ON” to compress the range between soft and loud sounds. Use [K / L] to select a setting, then press [OK]. Dynamic Range Control ON OFF Your setting will be activated. Note • Dynamic range control function is available only with the titles which are recorded in the Dolby Digital format. B Your setting will be activated. PCM : Converts the Dolby Digital into PCM (2 channel). When your amplifier/decoder is NOT compatible with Dolby Digital, set to “PCM”. Stream : Outputs Dolby Digital signals When your amplifier/decoder is compatible with Dolby Digital, set to “Stream”. • With regard to DVD playback, if the audio source is in Dolby Digital format, set “Dolby Digital” to “PCM” so that you can switch to main audio (L), sub audio (R), or a combination of both (L / R) using your amplifier / decoder. 3 PCM 48kHz 96kHz Your setting will be activated. 48kHz : If your amplifier/decoder is NOT compatible with 96kHz PCM, select “48kHz”. 96kHz sound will be output in 48kHz. 96kHz : If your amplifier/decoder is compatible with 96kHz PCM, select “96kHz”. 96kHz sound will be output. Note When playing back disc with copyright protection • Even if you select “96kHz”, the sound will be down sampled at 48kHz. 98 E2H00UD.indd 98 Disc Menu Language (Default : English) (DVD only) Set the language for disc menu. Use [K / L] to select a setting, then press [OK]. Disc Menu Language English French Spanish Other PCM (Default : 48kHz) Use [K / L] to select a setting, then press [OK]. Dolby Digital (Default : Stream) Your setting will be activated. 4 Audio Language (Default : Original) (DVD only) Set the audio language. Use [K / L] to select a setting, then press [OK]. Audio Language Original English French Spanish Other Your setting will be activated. • When “Original” is selected, the audio language will be in the disc’s default language. EN 2007/05/11 10:16:22 SETUPS 5 Subtitle Language (Default : OFF) (DVD only) Set the subtitle language. Use [K / L] to select a setting, then press [OK]. 7 Still Mode (Default : Auto) (DVD only) Select “Auto” usually. Use [K / L] to select a setting, then press [OK]. Auto Field Frame OFF English French Spanish Other Your setting will be activated. 5 , press 4-digit code Note • Frame is 1 completed video image made up of 2 fields (There are 30 frames per second of NTSC video). Code Input - - - - Note 6 Variable Skip / Replay Assign [V.SKIP] or [V.REPLAY] to skip or rewind by a certain amount of time when they are pressed. Use [K / L] to select a desired item, then press [OK]. A B Variable Skip Variable Replay Refer to the explanations below and set the selected item. A Variable Skip (Default: 30 seconds) Playback • Only the languages supported by the disc can be selected. • Audio language setting may not be available to some discs. • You can change or switch off the subtitles on a DVD also from the disc menu if it is available. • Press [CLEAR] or [s] to erase numbers entered incorrectly. 8 Recording • When you finish entering the code, press [OK]. Refer to the language code table on page 109. Basic Setup If “Other” is selected for 3 to using [the Number buttons]. Your setting will be activated. Auto : Optimum resolution setting (“Field” or “Frame”) will be selected. Field : Images in the still mode will be stabilized. Frame : Images in the still mode will be highly defined. Connections Still Mode Subtitle Language Introduction Playback (cont’d) Sets the amount of skip time for [V.SKIP]. Variable Skip Angle Icon (Default : ON) (DVD only) Set to “ON” to show the angle icon during the playback. Use [K / L] to select a setting, then press [OK]. Editing 5 seconds 15 seconds 30 seconds 1 minute 5 minutes Angle Icon Your setting will be activated. B Variable Replay (Default: 30 seconds) Function Setup ON OFF Sets the amount of rewind time for [V.REPLAY]. Variable Replay 5 seconds 15 seconds 30 seconds 1 minute 5 minutes Others Español EN E2H00UD.indd 99 99 2007/05/11 10:16:23 SETUPS Display Press [STOP C] if you are playing back a disc. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 SETUP DISC MENU o OK s 1 2 3 B TITLE RETURN p B j F g C CHANNEL -AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Use [K / L] to select “Display”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. 1 2 3 4 5 OSD Language Screen Saver FL Dimmer CC Style V-Chip Selection menu will appear. i h Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. 4 5 Refer to 1 to 5 on page 101 and set the selected item. • For 4 refer to pages 34-36. When you finish with setting, press [SETUP] to exit. 100 EN E2H00UD.indd 100 2007/05/11 10:16:24 SETUPS 1 OSD Language (Default : English) Set the language for the on-screen display. Use [K / L] to select a setting, then press [OK]. English Français Español Password Input Your setting will be activated. 2 2) Use [K / L] to select a desired item, then press [OK]. Screen Saver (Default : 10 minutes) Screen Saver A Downloadable Rating Change Password Downloadable Rating Set the rating system via digital broadcasting, or clear the downloaded ratings. If the broadcasting signal does not have the downloadable rating information, the message below will appear. Your setting will be activated. Downloadable Rating is currently not available. FL Dimmer (Default: Bright) FL Dimmer Auto Bright Dark 5 V-Chip To set the rating: Use [K / L] to select “BLOCK SETTING” then press [OK] to show the various types of ratings. Use [K / L] to select a desired rating to set, then press [OK] to show the levels for the rating. Use [K / L] to select a level, then press [OK] to switch “VIEW” or “BLOCK”. If you set one level to “BLOCK”, all the higher levels will be turned to “BLOCK” automatically. To clear the downloadable rating information and its setting: Use [K / L] to select “CLEAR DOWNLOADABLE RATING”, then press [OK]. B Function Setup You can set the viewing limitation for the digital TV programs to prevent your children from watching inappropriate programs. This feature is available only after the digital TV ratings have been downloaded. • The ratings can be downloaded by the unit automatically if it is available in your area. “DOWNLOADABLE RATING” after you have cleared the downloadable rating information, and the new information has not been downloaded since. Editing You can choose one from “Auto”, “Bright” and “Dark”. If “Auto” is selected, the display gets dark when the power is off. • This message will also appear when you try to access Playback Set the front panel display brightness. Use [K / L] to select a setting, then press [OK]. Recording OFF 5 minutes 10 minutes 15 minutes 30 minutes V-Chip A B Basic Setup Set the time to activate the screen saver function on the TV screen. Use [K / L] to select a setting, then press [OK]. 3 Connections OSD Language 1) Use [the Number buttons] to enter the access password. If you have not set the password, first, use [the Number buttons] to set the access password, then press [OK]. The number you entered will be stored as the access password. Introduction Display (cont’d) Change Password Change the current password. Use [the Number Buttons] to enter new access password. Note Others • When you forget the access password at step 1), enter 4,7,3,7 using [the Number buttons] in the password input window. Password will be cleared. • Depending on the type of rating system, you may set the levels individually. Español EN 101 E2H00UD.indd 101 2007/05/11 10:16:24 SETUPS Video Press [STOP C] if you are playing back a disc. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC DEF 1 2 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 7 8 9 SPACE CLEAR . 0 SETUP DISC MENU o OK s B TITLE 1 2 3 RETURN Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. Use [K / L] to select “Video”, then press [OK]. Use [K / L] to select a desired item, then press [OK]. 1 Progressive Scan 2 TV Aspect 3 Video Input p Submenu will appear. B j F i h g C CHANNEL -AUDIO REC + HDD DVD TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT 4 5 Refer to 1 to 2 on page 103 and set the selected item. • For 3 refer to page 50. When you finish with setting, press [SETUP] to exit. 102 EN E2H00UD.indd 102 2007/05/11 10:16:25 SETUPS 1 Progressive Scan (Default : OFF) 1) Use [K / L] to select “ON“, then press [OK]. Progressive Scan TV Aspect Activating progressive scan: Check your TV has progressive scan and connect with component video cable. Recording NOTE : If there is no picture or picture is distorted after selecting “Yes”, Wait about 15 seconds for auto recovery. If you have a standard TV: Select “4:3 Letter Box”, so that black bars appear on the top and bottom of the TV screen when playing back a wide-screen picture. Select “4:3 Pan & Scan” for a full height picture with both sides trimmed when playing back wide-screen picture. If you have a widescreen TV: Select “16:9 Wide”. Basic Setup 2) Use [{ / B] to select “Yes“, then press [OK]. Yes You can select the TV aspect ratio to match the formats of what you are playing back with the unit and your TV screen (4:3 standard or 16:9 widescreen TV). Use [K / L] to select a setting, then press [OK]. 4:3 Letter Box 4:3 Pan & Scan 16:9 Wide ON OFF Activate? TV Aspect (Default: 4:3 Letter Box) Connections This unit is compatible with the progressive scan system. The feature provides you with the higher definition images than the traditional output system does. To utilize this feature, you must set progressive scan mode to “ON”. 2 Introduction Video (cont’d) No 3) Use [K / L] to select “Yes“ within 15 seconds, then press [OK]. Your setting will be activated. Playback Note Editing • If your TV is compatible with progressive scan (525p / 480p), you are recommended to use the component video cable (commercially available) to connect this unit to the TV. (Refer to “Method 3” on page 18.) If not, use the RCA video cable and set the progressive scan to “OFF” or press and hold [SETUP] for more than 3 seconds during HDD / DVD playback. • When selecting “No” or not pressing any buttons on the unit or remote control within 15 seconds at step 3, progressive scan remains to be “OFF” (interlace scan). Function Setup Others Español EN 103 E2H00UD.indd 103 2007/05/11 10:16:26 SETUPS Reset All Reset the setting to default. STANDBY-ON SOURCE DTV/TV DISPLAY OPEN/CLOSE A .@/: ABC 1 2 DEF 3 GHI JKL MNO 4 5 6 PQRS TUV WXYZ 8 9 SPACE CLEAR 7 . 0 1 2 3 o OK s B TITLE RETURN p B j F i h g C CHANNEL -AUDIO REC DVD Use [K / L] to select “Reset All”, then press [OK]. Select “Yes” using [K / L] , then press [OK]. Reset to factory default? 4 Select “Yes” again using [K / L] , then press [OK]. Are you sure? Yes No Your setting in recording will be initialized. + HDD “General Setting” menu will appear. Yes No SETUP DISC MENU Press [SETUP] and use [K / L] to select “General Setting”, then press [OK]. TIMER REPEAT REC MODE D.DUBBING I V.REPLAY V.SKIP RAPID PLAY TIME SHIFT Note • The settings listed below will remain unchanged even after resetting to the factory default. – OSD language setting – Channel setting – Clock setting – Parental lock setting – V-Chip setting – Timer programming information 104 EN E2H00UD.indd 104 2007/05/11 10:16:26 Before requesting service for this unit, check the table below for a possible cause of the problem you are experiencing. Some simple checks or a minor adjustment on your part may eliminate the problem and restore proper operation. The unit turns on automatically without any operation. The OSD language menu appears every time the power turns on. Remedy • Check that the AC power cord is connected securely. • Batteries of the remote control are weak. • The unit turns on automatically 2 seconds before the timer recording. • Finish up the language setting procedure by selecting a language in the OSD language menu. Press [OK] to activate the setting. Yes No Playback the disc may not be usable. Recording • “ ” or error message appears if the operation is prohibited. • Batteries of the remote control are weak or exhausted. No picture, sound or menu appears on • Check if the connections are made securely and correctly. the screen. • Check if the cables are damaged. • Check if a correct external input channel is selected on your TV. (Refer to page 20.) • Check if you have completed the channel setting. (Refer to pages 26 to 28.) Clock setting and channel setting • If a recording is in progress, these operations cannot be performed. cannot be performed. The unit does not operate properly. • Moisture has condensed inside the unit. Remove the disc and leave the unit turned on for about 2 hours until the moisture evaporates. (Refer to page 4.) “Repairing” appears on the TV screen. • If there is a power failure or unplugging during recording, finalizing, formatting or editing (even after “Repairing” disappears), a repairing process will begin automatically just after turning the unit on again. Repairing It may take several minutes up to about several hours. In a case you intend to cancel the • If you intend to cancel the repairing process, press [OPEN/CLOSE A] repairing process. on the front panel, then select “Yes” and press [OK]. After that, press [OPEN/CLOSE A] to take out the disc. The disc canceled during the Do you want to cancel a repairing repairing process MAY NOT work. process? When selecting “Yes”, Basic Setup GENERAL The unit does not function. Connections POWER Symptom The power does not turn on. Introduction TROUBLESHOOTING Repairing When you forget the password for parental lock. The image from the external device • Try pressing [SOURCE] repeatedly. cannot be displayed or recorded. • Turn on all connected devices. • Check if the connections are made securely and correctly. Recording is impossible. Español • It is prohibited to make a recording from 2 minutes before the programmed start time of a timer recording. • This unit cannot record programs that contain copy protection signal. This is not a malfunction. • The space of the recording media may be used up. Try deleting unnecessary titles, or exchange it with the recordable media. • The maximum number of titles or chapters has exceeded. Delete the unnecessary titles to make enough space or insert a new recordable media. • Check if the connections are made securely and correctly. Others RECORDING HDD / DVD GENERAL Only specific channels do not appear. The external input channels (such as E1 or E2) cannot be skipped. • Check if the connections are made securely and correctly. • Check if the cables are damaged. • Try channel setting by following the steps on pages 26 to 28. • The channels may be set to be skipped. (Refer to pages 27 to 28.) • This unit does not skip the external input channels. This is not a malfunction. Function Setup CHANNEL TV channels cannot be changed. • Check that the AC power cord is connected securely. • (In case of power failure) Check the breaker and clock setting. • Please cancel the password and the set level. (Refer to page 97.) Editing The clock display does not appear in the front panel display. EN 105 E2H00UD.indd 105 2007/05/11 10:16:27 DVD RECORDING HDD HDD/DVD TROUBLESHOOTING Timer recording cannot be performed. • Titles recorded by the time shift recording function will not be stored Titles which were supposed to be recorded by the time shift in the title list. They may be stored temporarily in the title list, but will recording function cannot be found be deleted when you exit the time shift recording mode. Time shift in the title list. recording mode will stop not only when you press [STOP C] twice, but also when the disc runs out of space, when the recording time exceeds 12 hours, or when it comes to 2 minutes before timer recording. This is not a malfunction. Recording is impossible. • Copy-once programs cannot be recorded on DVD. This is not a malfunction. • Check if the disc is protected or finalised. Undo the protection or the finalisation. • DVD-RW once formatted on other unit cannot be recorded on this unit unless all the contents in the disc are erased. • Check if the connections are made securely and correctly. 100% ” may remain on screen for the The indication • “ Writing to Disc 100% ” “ Writing to Disc maximum of 20 seconds even after it reached 100%. This is not a does not disappear. malfunction. TV aspect ratio does not match your TV screen. GENERAL Playback picture is distorted. Color of the picture is abnormal. There is no sound, or no subtitle. PLAYBACK HDD HDD/DVD • The internal clock of the unit may have been stopped due to a power failure that lasted for more than 30 seconds. Reset the clock. (Refer to pages 29 to 30.) Playback does not start from the beginning. HDD playback suddenly stops. DVD Playback cannot be performed. There is no sound, or no subtitle. Digital audio setting cannot be changed to main audio (L), sub audio (R) or combination of both. • Check the TV aspect ratio. (Refer to page 103.) • A different aspect ratio will be used when the aspect ratio specified by the disc is not supported by this unit. • During fast forward or fast reverse, playback picture may be distorted. This is not a malfunction. • Connect to TV directly. When you connect this unit with the television via VCR or other devices, the picture may be distorted due to the copyprotection signal. • Check if the cables are damaged. • Keep the equipment which may cause electrical disturbances, such as a cellular phone, away. • Turn on all connected devices. • Check if the external input channel is set correctly. • Check if the connections are made securely and correctly. • Resume function may be activated. Refer to page 65 to cancel the resume point. • When DVD recording finishes during HDD playback, the unit will stop the HDD playback, and start writing data to the DVD. This is not a malfunction. • Check if the playable disc is inserted. • Check if the disc is loaded correctly with the labeled side facing up. • Discs made on other devices or on personal computers cannot be played back on this unit unless it is finalised on the device. Even if it is finalised, the performance of those discs are not guaranteed on this unit. • The disc may be dirty or flawed. Clean the disc. • Check if all the connections are made correctly. • Check the parental lock setting. (Refer to page 97.) • Playback of DVD is prohibited from 2 minutes before the programmed start time of a timer recording when the recording media is DVD. • Check if the “Disc Audio” is set correctly. (Refer to page 98.) • There is a possibility that the selected subtitle language is not supported by the disc. • If the audio source is in the Dolby Digital format, set the Dolby Digital Setting to “PCM” in “Playback” menu. (available only for DVD) (Refer to page 98.) 106 EN E2H00UD.indd 106 2007/05/11 10:16:27 EDITING HDD / DVD DVD Dubbing cannot be executed. Titles cannot be edited or deleted. Playback The remote control does not function. • No batteries in the remote or the batteries may be weak. Replace the batteries. • Make sure there is no obstacle between the remote and the unit. • Try getting closer to the unit. (Refer to page 12.) • If above solutions do not solve the problem, please call an Authorized Service Center. Recording The capacity of the disc doesn’t increase even if the recorded program is deleted. Dubbing cannot be executed. • The titles or the disc itself may be protected. Cancel the protection by following the steps on page 86 for title protection and page 55 for disc protection. • When the number of the titles or the chapters exceeds the maximum recordable number, the dubbing will not be executed. • Dubbing of a “copy-once only” program is not possible with this unit. • The titles in the DVD+R/-R cannot be edited or deleted if they are finalised. If it is DVD-RW, undo the finalisation by following the steps on page 56. • With DVD+RW/-RW, the disc space will increase only when the last title in the original is deleted. With DVD-R/+R, deleting a title will not increase the disc space. Check if the disc is compatible for recording (refer to page 37). Basic Setup REMOTE CONTROL Titles cannot be edited or deleted. Connections Audio language or the subtitle • Multilingual subtitles are not supported by the disc. language of the DVD cannot be • Some audio languages or the subtitle languages can be changed only changed. from the disc menu. Please refer to the disc’s manual. Camera angles cannot be changed. • Even though the multi-angle feature is supported by the disc, that does not mean all the scenes are shot from multi-angles. Changing angles are available only for those scenes shot from the multi-angle. The disc cannot be played back on • Some DVD players do not play back the disc made on other recorder. other player even though it is Refer to the manual of the unit. finalized properly. Introduction PLAYBACK DVD TROUBLESHOOTING Frequently Asked Questions Possible when the region code of the disc is 1 and All. – Can I connect the unit to my PC? No, you cannot control the unit by PC. – Can I program a timer recording with cable/satellite box? Yes, you can. Select “E1” or “E2” as your recording channel, and leave the cable / satellite box on (pages 17, 42-45). – Can I record one channel while watching another channel using a cable / satellite box? It depends on your connection configurations. For more details, please kindly contact your cable / satellite provider. – Can I connect this unit directly to a TV which only has an antenna in jack using an RF coaxial cable? No. You need an RF modulator (commercially available) to connect this unit to a TV which only has an antenna in jack (page 16). This unit does not have an RF modulator. – Can I change the channels on the cable / satellite box using the remote control of this unit? No. Changing the channels on the cable / satellite box using this unit’s remote control is not possible. You need to use the remote control supplied with the cable / satellite box to change the channels on the cable / satellite box. Others – Can I play back DVD-video that is bought in another country? Function Setup No, this unit records only HDD/DVD. Editing – Can I record to CD-RW/-R? Español EN 107 E2H00UD.indd 107 2007/05/11 10:16:27 TROUBLESHOOTING Error message Cause Solution Disc Error — Please eject the disc. — Playback feature may not be available on this Disc. • Unplayable disc is inserted in the unit. • The disc is upside down. • Insert the standardized disc which bear the marks on page 58. • Insert the disc with the labeled side facing up. Region Error — Please eject the disc. — Playback is not authorized in your region. • Playback is not authorized in the region of the DVD-video which you inserted in the unit. • Insert the DVD-video with region codes 1 or ALL. Parental Lock On The current selected parental level prohibits playback. • The current selected parental level prohibits playback. • Check “Parental Lock” setting in “Playback” menu (page 97). Recording Error This program is not allowed to be recorded. • The recording function encountered the copy prohibited program. • You cannot record copy prohibited programs. Recording Error This program is not recordable in +VR mode. • You are trying to record the copy-once program. • You cannot record the copy-once program. Recording Error Cannot record on this disc. • You are trying to record onto the disc which is unrecordable, or the disc status is unable to record. • The disc is dirty. • The disc is damaged. • Insert the recordable disc, and ensure the disc status satisfies the recording requirements (page 37). • Clean the disc with a cleaning cloth. • Replace the disc. Recording Error This disc is protected and not recordable. • You are trying to record on to the protected disc which is set in “Disc Edit” menu. • Release the disc protect setting in “Disc Edit” menu (page 55). Recording Error Disc is full. (No area for new recording) • You are trying to record onto the disc which has no space for recording. • Insert the recordable disc with enough recording space. Recording Error You cannot record more than 49 titles on one disc. (The maximum is 49) • You are trying to record onto the disc on which the number of recording titles comes up to the maximum (49). • Delete unnecessary titles (pages 76-77). Recording Error You cannot record more than 254 chapters on one disc. (The maximum is 254) • You are trying to record onto the DVD+RW or DVD-RW on which the number of recording chapters comes up to the maximum (254). • Delete unnecessary chapter marks (pages 81-82). Recording Error You cannot record on this disc as Power Calibration Area is full. • When recordings are performed repeatedly onto an unstable disc, this area may come up to be full. • Every time you insert a disc for recording, the disc’s working area will be taken up. And if you repeat this frequently, it will be used up sooner and you may not be able to record full 49 titles. • Insert a new disc. Recording Error This disc is already finalized. • You are trying to record onto the disc already finalized. • Release the finalizing for this disc (page 56). Recording Error The disc has no recording compatibility. Set “Make Recording Compatible” to “ON” to convert the disc. • You are trying to record onto the disc that had been recorded by other recorders. • Set “Make Recording Compatible” to “ON” to rewrite the menu, after that you will record to disc (page 39). Recording Error You cannot record more than 600 titles on HDD. (The maximum is 600). • You are trying to record onto the HDD when total title number is already at its limit. • Delete unnecessary titles (pages 76-77). Recording Error Cannot record on this HDD. • The internal HDD is dirty or damaged. • There is not enough space on the internal HDD. • Contact the customer service center. • Delete unnecessary titles (pages 76-77). * If you are still having trouble with the unit after checking “TROUBLESHOOTING”, write down the error code and the error description for calling our help line mentioned on the front page to locate an Authorized Service Center. 108 EN E2H00UD.indd 108 2007/05/11 10:16:27 Function Setup Others Code 6467 6559 6553 6547 5350 6564 6554 6566 6660 6560 6550 6555 6565 6557 6558 6561 5165 6567 6569 6568 6658 6653 6647 6666 6651 6654 4861 6655 6661 6665 6664 6657 6669 6757 6764 6772 6855 6861 4971 6961 7054 5655 7161 7267 Editing Language Russian Samoan Sangho Sanskrit Scots Gaelic Serbian Serbo-Croatian Sesotho Setswana Shona Sindhi Singhalese Siswat Slovak Slovenian Somali Spanish Sundanese Swahili Swedish Tagalog Tajik Tamil Tatar Telugu Thai Tibetan Tigrinya Tonga Tsonga Turkish Turkmen Twi Ukrainian Urdu Uzbek Vietnamese Volapuk Welsh Wolof Xhosa Yiddish Yoruba Zulu Playback Code 5467 5565 5560 5547 5551 5557 5347 5566 5647 5669 5760 5765 5757 6469 5771 6460 5761 5767 5861 5847 5868 5860 5866 5957 5953 5965 5958 5966 5955 5964 5961 5960 6047 6051 6061 6149 6164 6159 6247 6265 5247 6258 6266 6367 6459 6461 Recording Language Hungarian Icelandic Indonesian Interlingua Interlingue Inupiak Irish Italian Japanese Javanese Kannada Kashmiri Kazakh Kinyarwanda Kirghiz Kirundi Korean Kurdish Laothian Latin Latvian; Lettish Lingala Lithuanian Macedonian Malagasy Malay Malayalam Maltese Maori Marathi Moldavian Mongolian Nauru Nepali Norwegian Occitan Oriya Oromo (Afan) Panjabi Pashto; Pushto Persian Polish Portuguese Quechua Rhaeto-Romance Romanian Basic Setup Code 4748 4747 4752 6563 4759 4764 5471 4765 4771 4772 4847 5167 4860 5072 4854 4855 4864 4853 5971 4851 5759 4947 7254 4961 5464 4965 5047 6058 5160 5161 5166 5261 5256 5255 5264 5271 5358 5747 5051 5158 5758 5360 5367 5447 5569 5455 Connections Language Abkhazian Afar Afrikaans Albanian Amharic Arabic Armenian Assamese Aymara Azerbaijani Bashkir Basque Bengali;Bangla Bhutani Bihari Bislama Breton Bulgarian Burmese Byelorussian Cambodian Catalan Chinese Corsican Croatian Czech Danish Dutch English Esperanto Estonian Faroese Fiji Finnish French Frisian Galician Georgian German Greek Greenlandic Guarani Gujarati Hausa Hebrew Hindi Introduction LANGUAGE CODE Español EN 109 E2H00UD.indd 109 2007/05/11 10:16:28 GLOSSARY Analog Audio PBC (playback control) (video CD only) An electrical signal that directly represents sound. Compare this to digital audio which can be an electrical signal, but is an indirect representation of sound. See also “Digital Audio”. This function enables you to play back interactive software using a menu screen. See also “Video CD”. Aspect Ratio The width of a TV screen relative to its height. Conventional TVs are 4:3 (in other words, the TV screen is almost square); widescreen models are 16:9 (the TV screen is almost twice as wide as it is high). Chapter Just as a book is split up into several chapters, a title on a DVD is usually divided into chapters. See also “Title”. Component Video Output Each signal of luminance (Y) and component (PB/CB, PR/ CR) is independent to output so that you can experience picture color as it is. Also, due to compatibility with progressive video (525p/480p), you can experience higher-density picture than that in interlace (525i/480i). Digital Audio An indirect representation of sound by numbers. During recording, the sound is measured at discrete intervals (44,100 times a second for CD audio) by an analogto-digital converter, generating a stream of numbers. On playback, a digital-to-analog converter generates an analog signal based on these numbers. See also “Sampling Frequency” and “Analog Audio”. Dolby Digital The system to compress digital sound developed by Dolby Laboratories. It offers you sound of stereo(2ch) or multi channel audio. Finalize To make DVD, which have been recorded on, possible to play back in DVD players. With this unit, it is possible to finalize DVD+R, DVD-RW, and DVD-R. JPEG (joint photographic experts group) PCM (pulse code modulation) The most common system of encoding digital audio, found on CD and DAT. Excellent quality, but requires a lot of data compared to formats such as Dolby Digital and MPEG audio. For compatibility with digital audio recorders (CD, MD and DAT) and AV amplifiers with digital inputs, this unit can convert Dolby Digital and MPEG audio to PCM. See also “Digital Audio”. Progressive Scan (525p/480p) A type of display that does not split each frame into fields, and instead scans directly through all the scanlines of each frame in order. Progressive scan provides less flickering and higher image resolution than traditional (525i/480i) TV signals. Refer to page 103 for instructions on selective progressive scan mode. Region Code Regions associate discs and players with particular areas of the world. This unit will only play back discs that have compatible region codes. You can find the region code of your unit by looking on the rear panel. Some discs are compatible with more than one region (or all regions). Sampling Frequency The rate which sound is measured by a specified interval to turn into digital audio data. The numbers of sampling in one second defines as sampling frequency. The higher the rate, the better the sound quality. SAP (secondary audio program) Sub-audio channel which is delivered separately from main-audio channel. This audio channel is used as an alternate in bilingual broadcasting. S-Video Output It delivers independently each signal of color(C) and luminance(Y) to TV as video signals, so that higher-quality picture will be gained. JPEG is a method of compressing still image files. You can copy JPEG files on CD-RW/-R from a computer and play back the files on this unit. Title (DVD only) MP3 (MPEG audio layer 3) Audio CD use tracks to divide up the content of a disc. The DVD equivalent is called a chapter. See also “Chapter”. MP3 is a method of compressing files. You can copy MP3 files on CD-RW/-R from the computer and play back the files on this unit. A collection of chapters on DVD. See also “Chapter”. Track Video CD A digital format for store video data in compact disc. 110 EN E2H00UD.indd 110 2007/05/11 10:16:28 +VR (video recording) format DVD+Rewritable, DVD+Recordable DVD-Rewritable, DVD-Recordable (+VR mode only) Video recording format Sampling frequency Compression format 13.5 MHz MPEG 2 Audio recording format Sampling frequency Compression format 48 kHz Dolby Digital Front Channel frequency synthesized tuning system VHF 2~13, UHF 14~69 2~13, A~W, W+1~W+94 (analog W+1~W+84), A-5~A1, 5A 2V rms (input impedance: more than 22kΩ) Playback 1Vp-p (75Ω) Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω) 75Ω unbalanced Editing 2V rms (input impedance: more than 22kΩ) 2V rms (output impedance: more than 1kΩ) 1Vp-p (75Ω) Function Setup Rear Recording 1Vp-p (75Ω) Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω) Y: 1Vp-p (75Ω) C: 286mVp-p (75Ω) Y: 1Vp-p (75Ω) PB/CB: 700mVp-p (75Ω) PR/CR: 700mVp-p (75Ω) 500mVp-p (75Ω) Others Tuner Tuning system Channel coverage (ATSC / NTSC) Terrestrial CATV Terminals Audio input RCA jack x 2 Video input RCA jack x 1 S-video input Mini DIN 4-pin x 1 VHF/UHF/CATV input and output F-type Audio input RCA jack x 2 Audio output RCA jack x 2 Video input RCA jack x 1 Video output RCA jack x 1 S-video input Mini DIN 4-pin x 1 S-video output Mini DIN 4-pin x 1 Component video output RCA jack x 3 Coaxial digital audio output RCA jack x 1 Basic Setup Recording discs DVD+RW/+R, DVD-RW/-R, DVD-video, CD-DA, Video CD, CD-RW/-R 120V AC +/-10%, 60Hz +/-5% 33W (standby: 5.5W) 16 9/16 x 2 3/8 x 11 7/16 inches (420 x 59 x 290mm) 7.5 lbs. ( 3.4kg ) 41°F (5°C) to 104°F (40°C) Less than 80% (no condensation) ATSC / NTSC-M TV standard Connections General System Power requirements Power consumption Dimensions (width x height x depth) Weight Operating temperature Operating humidity TV format Recording Recording format Introduction SPECIFICATIONS Español Note • The specifications and design of this product are subject to change without notice. EN 111 E2H00UD.indd 111 2007/05/11 10:16:28 ESPAÑOL Discos Reproducibles Disco Grabable Este aparato es compatible con la reproducción de los siguientes discos y archivos. Discos reproducibles Logotipos DVD-video Este aparato puede grabar a DVD+RW, DVD+R, DVD-RW y DVD-R. Los discos DVD+R/DVD-R pueden ser grabados sólo una vez. Los discos DVD+RW/DVD-RW pueden ser grabados y borrados muchas veces. En este aparato los discos DVD-RW/-R serán grabados automáticamente en el modo DVD+VR. Logotipo Atributos DVD+RW DVD+R DVD+RW DVD+R DVD-RW DVD-R DVD-RW (Sólo discos en modo de video finalizados) DVD-R (Sólo discos en modo de video finalizados) CD-DA (CD de audio) CD de video CD-RW CD-R Archivos reproducibles Medio CD-DA MP3 CD-RW/-R Disco de 8 cm / 12 cm, un solo lado, una sola capa Tiempo de grabación máx. aprox. (modo SLP): 360 minutos (4,7 GB) (para 12 cm) 108 minutos (1,4 GB) (para 8 cm) • Los siguientes discos se recomiendan para obtener una buena calidad de grabación y han sido comprobados como compatibles con este aparato. Sin embargo, según sea la condición del medio el equipo podría no leer el disco correctamente. Verbatim DVD+R 8x, DVD+RW 4x, DVD-R 8x, DVD-RW 2x JVC DVD-RW 4x Maxell DVD+R 4x/8x/16x, DVD-R 8x/16x SONY DVD+R 4x/8x/16x, DVD+RW 4x TDK DVD+R 4x/8x/16x El comportamiento de cualquier otro disco no está garantizado. • Usted puede reproducir discos DVD+RW en la mayoría de los reproductores de DVD sin finalizarlos. Sin embargo, si usted ha añadido o eliminado capítulos, u ocultado capítulos, debe ejecutar “Compatibilizar edic.” antes de poder ver dichos efectos en otros equipos. (Consulte la página 91.) Para reproducir discos que no sean DVD+RW en otros reproductores de DVD, usted necesitará finalizarlos. JPEG es una marca registrada de DVD Format/Logo Licensing Corporation. Códigos de Región El número presente en el interior el globo se refiere a una región del mundo.Este aparato puede reproducir discos DVD que estén rotulados para ALL las regiones o para la región 1. Disco no Grabable • Un DVD-RW grabado en un modo distinto de +VR no será grabable en este aparato a menos que usted borre todo el contenido del disco. (Consulte la página 90.) • Un DVD-R grabado en un modo distinto de +VR no será grabable en este aparato. 112 ES E2H00UD.indd 112 2007/05/11 10:16:28 ESPAÑOL Introduction Conexión Básica 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA. 2) Efectúe la conexión básica ilustrada más abajo. antena de VHF / UHF L L cable coaxial de RF R AUDIO IN (E1) IN R IN S-VIDEO AUDIO OUT VIDEO OUT o Connections parte trasera de este aparato VIDEO VIDEO IN OUT L empresa de TV por cable OUT R AUDIO OUT Esta conexión es sólo para el procesamiento de cada elemento de la señal de TV cable de video RCA cable de audio RCA cable coaxial de RF Recording ANT. IN R L AUDIO IN VIDEO IN 3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA. Playback Conexión a Una Caja de TV por Cable / Satelital 1) Desconecte el cable de alimentación de su televisor del tomacorriente de CA. 2) Efectúe la conexión como se ilustra abajo. ej.) antena parabólica satelital parte trasera de su televisor Esta conexión es sólo para el procesamiento de cada elemento de la señal de TV VIDEO IN AUDIO IN R L Editing o ANT. IN empresa de TV por cable Function Setup VIDEO VIDEO IN OUT IN cable de audio RCA cable de video RCA parte trasera de este aparato cable coaxial de RF Y PB/CB L OUT cable coaxial de RF R IN ANTENNA AUDIO IN (E1) IN /CR S-VIDEO AUDIO OUT OUT S-VIDEO COAXIAL DIGITAL AUDIO OUTPUT PCM/BITSTREAM ANT. IN RF OUT caja de TV por cable/satelital VIDEO OUT S-VIDEO OUT VIDEO VIDEO IN OUT OUT L Y PB/CB ANTENNA R AUDIO IN (E1 L1) o L Others AUDIO OUT R L Basic Setup parte trasera de su televisor ANTENNA IN R S-VIDEO AUDIO OUT PR/CR COMPONENT VIDEO OUT OUT S-VIDEO cable de video RCA Español cable de audio RCA cable de S-video 3) Enchufe los cables de alimentación de los aparatos al tomacorriente de CA. ES 113 E2H00UD.indd 113 2007/05/11 10:16:29 ESPAÑOL Configuración Inicial Cuando usted encienda este aparato por primera vez necesita seguir estos pasos. 1 2 3 Utilice [K / L] para seleccionar el tipo de señal de emisión, y luego presione [OK]. Ajuste inicial Ajuste de Canal Presione [STANDBY-ON y]. Verificar que la antena esté conectada a la toma "ANTENNA IN". Antena Cable (Analógico) Cable (Analógico/Digital) Encienda el televisor. Seleccione la entrada a la cual está conectado el aparato. Utilice [K / L] para seleccionar su idioma deseado, y luego presione [OK] para establecerlo. Initial Setup El equipo comenzará a obtener los canales disponibles en su región. 4 OSD Language English Français Español Utilice [{ / B] para seleccionar un elemento a configurar, y utilice [K / L] para seleccionar el contenido de su preferencia, y luego presione [OK]. Ajuste inicial Ajste Manual de Reloj ENE / 01 / 2007 ( LUN ) 12 : 00 AM Grabación Básica Si usted está reproduciendo los títulos de una unidad de disco rígido, presione primero [HDD] y luego continúe al paso 2. Si usted está reproduciendo los títulos de un DVD, presione primero [DVD]. 1 4 Presione [OPEN/CLOSE A] para abrir la bandeja de discos e insertar su disco con el rótulo aupntando hacia arriba. * Asegúrese de que el disco sea compatible con este aparato. (Para obtener la lista de discos compatibles consulte la página 37.) 2 3 Para seleccionar un modo de grabación presione [REC MODE]. Modo de grabación Tiempo de grabación HQ SP SPP LP EP SLP Disco de 8 cm Disco de 12 cm HDD (interno) 18 min 60 min 15 hrs 36 min 120 min 30 hrs 45 min 150 min 37.5 hrs 54 min 180 min 45 hrs 72 min 240 min 60 hrs 108 min 360 min 90 hrs Calidad del video y el sonido Presione [REC I] para iniciar la grabación. Para configurar la grabación a un toque con temporizador (OTR)... Esta es una manera sencilla de configurar el tiempo de grabación en bloques de 30 minutos. Presione [REC I] repetidamente hasta que aparezca en la pantalla del televisor la longitud deseada de grabación (30 minutos a 6 horas). Comenzará la grabación a un toque con temporizador. I 0h30m Buena (grabación normal) 6h00m Deficiente Seleccione un canal externo de entrada adecuado presionando [SOURCE] o [CHANNEL / ]. Presione [DTV/TV] para seleccionar TV analógica o TV digital, luego y utilice [CHANNEL / ] o [los botones numéricos] para seleccionar un canal que se desee grabar. Consulte “Switching Analog Mode/Digital Mode” y “Channel Selection” en la página 31. 0h30m 1h00m 5h30m Para cambiar la duración de la grabación durante la grabación a un toque con temporizador: Presione [REC I] repetidamente hasta que aparezca la duración deseada. Para cancelar la grabación a un toque con temporizador dentro del tiempo especificado: Presione [STOP C]. 5 Para de tener la grabación presione [STOP C]. 114 ES E2H00UD.indd 114 2007/05/11 10:16:30 ESPAÑOL HDD Utilice [K / L] para seleccionar “Doblaje”, y luego presione [OK]. Seleccione REC MODE. Alto HQ SP SPP LP EP SLP Auto 500 MB 3000 MB Unidad de disco rígido a DVD Utilice [K / L] para seleccionar “HDD DVD”, y luego presione [OK]. Utilice [K / L] para seleccionar “Añadir”, y luego presione [OK]. DVD 3000 MB Lista doblaje Añadir Borrar todo Inic de doblaje 1/1 Repita los pasos 4 y 5 hasta que registre todos los títulos a ser copiados. Con el copiado a un toque, usted puede comenzar a copiar de inmediato con sólo un toque. Para copiar el contenido de un DVD que está finalizado en otro equipo, utilice esta función. Durante la reproducción del título que desea copiar, presione [D.DUBBING]. Si usted está reproduciendo un DVD, el copiado del DVD a la unidad de disco rígido comenzará de inmediato. Si usted está reproduciendo una unidad de disco rígido, el copiado de la unidad de disco rígido al DVD comenzará de inmediato. • El copiado comenzará desde el comienzo del título que está siendo reproducido. • El aparato sólo copiará el título que está siendo reproducido. • Cuando se copia de una unidad de disco rígido a un DVD, el modo de grabación será configurado automáticamente a “Alto” cada vez que se satisfagan las condiciones (consulte la página 49). De lo contrario, será aplicado automáticamente el último modo de grabación seleccionado. Para detener el copiado en curso: Presione [STOP C] en el panel frontal. Function Setup El título estará ahora registrado en la lista de títulos copiados. Copiado a un toque...... Editing Utilice [K / L / s / B] para seleccionar un título deseado, y luego presione [OK]. El copiado comenzará. Para detener el copiado en curso: Presione [STOP C] en el panel frontal. Playback HDD 9 Utilice [K / L] para seleccionar “Sí”, y luego presione [OK]. Recording Utilice [K / L] para seleccionar “DVD HDD”, y luego presione [OK]. 5 6 DVD Doblando títulos DVD a Unidad de disco rígido 4 Utilice [s / B] para seleccionar un modo de grabación deseado, y luego presione [OK]. Basic Setup 1 2 3 Presione [SETUP] en el modo de detención. 7 8 Luego de añadir todos los títulos que desea, utilice [K / L] para seleccionar “Inic de doblaje” en el menú de copiado, y luego presione [OK]. Connections Preparación para el copiado (unidad de disco rígido a DVD): • Inserte un DVD grabable. Preparación para el copiado (DVD a unidad de disco rígido): • Inserte un disco a ser copiado. Introduction Copiado Básica Reproducción directa 1 * Asegúrese de que el disco sea compatible con este aparato. (Para obtener la lista de discos compatibles consulte la página 58.) 2 3 Para iniciar una reproducción presione [PLAY B]. Para detener momentáneamente la reproducción presione [STOP C] una vez. Español Presione [OPEN/CLOSE A] para abrir la bandeja de discos e insertar su disco con el rótulo aupntando hacia arriba. Others Si usted está reproduciendo los títulos de una unidad de disco rígido, presione primero [HDD] y luego continúe al paso 2. Si usted está reproduciendo los títulos de un DVD, presione primero [DVD]. • Consulte “Resume Playback” en la página 65. ES 115 E2H00UD.indd 115 2007/05/11 10:16:31 LIMITED WARRANTY FUNAI CORP. will repair this product, free of charge in the USA in the event of defect in materials or workmanship as follows: DURATION: PARTS: FUNAI CORP. will provide parts to replace defective parts without charge for one (1) year from the date of original retail purchase. Certain parts are excluded from this warranty. LABOR: FUNAI CORP. will provide the labor without charge for a period of ninety (90) days from the date of original retail purchase. LIMITS AND EXCLUSIONS: THIS WARRANTY IS EXTENDED ONLY TO THE ORIGINAL RETAIL PURCHASER. A PURCHASE RECEIPT OR OTHER PROOF OF ORIGINAL RETAIL PURCHASE WILL BE REQUIRED TOGETHER WITH THE PRODUCT TO OBTAIN SERVICE UNDER THIS WARRANTY. This warranty shall not be extended to any other person or transferee. This warranty is void and of no effect if any serial numbers on the product are altered, replaced, defaced, missing or if service was attempted by an unauthorized service center. This limited warranty does not apply to any product not purchased and used in the United States. This warranty only covers failures due to defects in material or workmanship which occur during normal use. It does not cover damage which occurs in shipment, or failures which are caused by repairs, alterations or products not supplied by FUNAI CORP., or damage, which results from accident, misuse, abuse, mishandling, misapplication, alteration, faulty installation, improper maintenance, commercial use such as hotel, rental or office use of this product, or damage which results from fire, flood, lightning or other acts of God. THIS WARRANTY DOES NOT COVER PACKING MATERIALS, ANY ACCESSORIES (EXCEPT REMOTE CONTROL), ANY COSMETIC PARTS, COMPLETE ASSEMBLY PARTS, DEMO OR FLOOR MODELS. FUNAI CORP. AND ITS REPRESENTATIVES OR AGENTS SHALL IN NO EVENT BE LIABLE FOR ANY GENERAL, INDIRECT OR CONSEQUENTIAL DAMAGES ARISING OUT OF OR OCCASIONED BY THE USE OF OR THE INABILITY TO USE THIS PRODUCT. THIS WARRANTY IS MADE IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR IMPLIED, AND OF ALL OTHER LIABILITIES ON THE PART OF FUNAI, ALL OTHER WARRANTIES INCLUDING THE WARRANTY OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE, ARE HEREBY DISCLAIMED BY FUNAI AND ITS REPRESENTATIVES IN THE UNITED STATES. ALL WARRANTY INSPECTIONS AND REPAIRS MUST BE PERFORMED BY AN AUTHORIZED SERVICE CENTER. THIS WARRANTY IS ONLY VALID WHEN THE UNIT IS CARRIED-IN TO AN AUTHORIZED SERVICE CENTER. THE PRODUCT MUST BE ACCOMPANIED BY A COPY OF THE ORIGINAL RETAIL PURCHASE RECEIPT. IF NO PROOF OF PURCHASE IS ATTACHED, THE WARRANTY WILL NOT BE HONORED AND REPAIR COSTS WILL BE CHARGED. IMPORTANT: THIS LIMITED WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY HAVE OTHER RIGHTS THAT VARY FROM STATE TO STATE. IF, AT ANY TIME DURING THE WARRANTY PERIOD, YOU ARE UNABLE TO OBTAIN SATISFACTION WITH THE REPAIR OF THIS PRODUCT, PLEASE CONTACT FUNAI CORP. ATTENTION: FUNAI CORP. RESERVES THE RIGHT TO MODIFY ANY DESIGN OF THIS PRODUCT WITHOUT PRIOR NOTICE. WARRANTY STATEMENT REGARDING NON AUTHORIZED REPAIRS: To obtain warranty service, you must take the product, or deliver the product freight prepaid, in either its original packaging or packaging affording an equal degree of protection, to any AUTHORIZED SERVICE CENTER. FUNAI CORP. will not reimburse you for any service done by unauthorized service providers without prior written approval. To locate your nearest AUTHORIZED SERVICE CENTER or for general service inquiries, please contact us at: FUNAI CORPORATION Customer Service Tel: 1-800-605-8610 http://www.funai-corp.com 19900 Van Ness Avenue, Torrance, CA 90501 Printed in China E2H00UD.indd 116 E2H00UD 1VMN23645 ★★★★★ 2007/05/11 10:16:31
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project
Related manuals
advertisement