Motorola 6881029B40-A Pager User Manual

Motorola 6881029B40-A Pager User Manual
Contents
USER’S GUIDE
A
After you have read this guide and your pager has been activated by your
service provider, send yourself a test page. Refer to “Functionality and Use
of Your Pager” on page 32 for more information.
1
GETTING STARTED
Sending a Test Page to Yourself
Pager Alarms
Set a One-Time Alarm ......................... 16
Set the Alarm to Alert Daily .................. 17
Message Alarms
Set a One-Time Message Alarm.......... 19
Set a Daily Message Alarm.................. 21
Private Time
Set Private Time ................................... 22
Maildrop/Information Service Option
Maildrop Alerts ..................................... 24
Notebooks
Storing Personal and Maildrop
Messages in Your Notebooks ......... 28
Deleting Messages from
Your Notebooks ..................................
Features.................................................... 30
Care and Use............................................ 32
Battery Information.................................. 34
Installing/Replacing the Battery............ 34
Effective Use of Your Pager
INTRODUCTION
Congratulations on purchasing an Advisor Elite pager. Your new pager
provides exciting capabilities in messaging and can become a vital part of
your business and personal life. The pager’s four-line display and
expanded functionality incorporates many of the most advanced electronic,
communications and wireless technologies available.
The Advisor Elite pager uses FLEX® technology. FLEX technology extends
battery life up to four times longer than ordinary pagers and improves the
ability to receive messages.
These compact pagers integrate messaging and time keeping functions in
a package that is convenient to carry. Full understanding of what this
product offers begins with reading this user’s guide. This user’s guide
includes a detachable quick reference card on the back cover.
Introduction
Control Buttons....................................... 2
Getting Started
Turning Your Pager On ........................... 3
Turning Your Pager Off ........................... 4
Using the Function Menu ....................... 5
Message-Status Screen ......................... 6
Backlight................................................. 7
Receiving/Reading
Personal Messages .......................... 7
Display Zoom ......................................... 9
Time and Date
Setting the Time and Date.................... 10
Alerts
Setting the Incoming Message Alert .... 12
Locking/Unlocking Messages
Lock/Unlock a Message ....................... 14
Deleting Messages
Delete a Single Message ..................... 15
Delete all Messages ............................. 15
Your pager can help you keep in contact with everyone important to you. By
giving your pager number to your business associates, family, and friends,
you can be contacted whenever needed.
If you have a cellular phone, give your pager number instead of your
cellular number. Then you can decide who to call back on your cellular
phone without paying for incoming calls.
Control Buttons
Left/Right
Directional
Buttons
Function/
Select Button
2
Up/Down
Directional Buttons
Read/Escape/
Power On Button
Used to navigate through the Function menu
and through your messages.
K
Function/Select
Button
J
Read/
Power On
Used to display the Function menu, to select
a pager function, and to activate your
selection.
Used to turn the pager on and to read
messages.
F
Up/Down
Directional
Buttons
Use to navigate through time, alarm, date
setting functions and to navigate through
messages.
G
Turning Your Pager On
Press J. A start-up screen is momentarily displayed and your pager
activates the currently selected alert.
Note: Press any button to stop the alert.
GETTING STARTED
Left/Right
Directional
Buttons
GETTING STARTED
H
I
Private Time
Power On
Audible
_
Alarm
Q
N
P
Example of the Standby Screen
When the pager is on and no activity is taking place, the Standby screen is
displayed. The Standby screen displays the power-on indicator N and may
display other pager status indicators.
Turning Your Pager Off
Press K to display the Function menu.
Press H to move the cursor to q.
Press K. TURN PAGER OFF? is displayed.
Press K again to turn the pager off.
Your pager is now off and the screen is blank.
➊
➋
➌
➍
4
3
The Message-status screen shows the current status of your messages.
For example, unread messages are indicated by a flashing m symbol,
locked messages are indicated by g.
The Message-status screen also displays the time and date and any
activated pager settings. The Message-status screen can be accessed by
pressing H, I, G, or F from the Standby screen.
mmmmmmomm
VVjV
u
u
ESCAPE
lvL1rqaACgduZ
Example of Fully Displayed Function Menu
➋ Press H or I to move the cursor within the Function menu.
As you move through the Function menu, the pager function symbols
flash to indicate the present location of the cursor. To exit from the
Function menu without making any changes press J.
Note: Some symbols may not display on your pager, depending upon
your pager’s features and whether it has messages.
5
GETTING STARTED
Message-Status Screen
The Function menu provides access to the many features of your pager
through the use of symbols and prompts.
➊ Press K to display the Function menu. When the Function menu is
initially displayed a flashes to indicate the location of the cursor.
GETTING STARTED
Using the Function Menu
mgmmomm
VjV
P
(
Q
3:15PM
05/05/97
Example of the Message-Status Screen
6
Reading a Stored Message
Backlight
Your pager can receive up to 19 personal messages. When a message is
received, your pager alerts according to the current alert setting (audible,
vibrate, or no message alert). A new message is indicated by a flashing m
symbol. When a message is selected the symbol changes to o.
Reading an Incoming Message
➊ Press any button to stop the alert.
➋ Press J to display your message.
A flashing t in the right corner of the screen indicates the message is
continued on an additional screen(s).
➌ Press J to read the next screen.
the message you want to read.
GETTING STARTED
Receiving/Reading Personal Messages
➊ From the Message-status screen press H or I to move the cursor to
GETTING STARTED
In low-light conditions, the pager’s backlight automatically turns on
whenever a button is pressed. You can manually turn the backlight on or off
at any time by pressing and holding K for two seconds. The backlight
automatically turns off when the pager returns to the Standby screen.
➋ Press J to read the message.
Message Reading Features
Press G to read a message line by line.
Press and hold J for automatic message scrolling, screen by screen.
Press F to go back to the first screen of the message.
Press H or I while reading a message to read the previous or next
message.
Note: When an unread message exists, your pager gives a periodic
reminder alert until all unread messages are read, or for up to 30 minutes.
A flashing N on the Standby screen indicates that you have unread
messages.
•
•
•
•
8
7
➊ From the Function menu, press H to move the cursor to 4.
➋ Press K. Display zoom is now disabled.
Display Zoom
When this feature is enabled, the standard 4-line display is converted to a
2-line display. The characters are enlarged vertically, increasing message
readability.
To Enable Display Zoom:
➊ From the Function menu, press H to move the cursor to 1.
➋ Press K. Display zoom is now active.
TIME AND DATE
To Disable Display Zoom
This feature allows you to scan the first line of your messages.
➊ Press J .
➋ Use the H and I buttons to move the cursor through your
messages.
Note: Previewing an unread message does not remove the unread
message status from the message.
GETTING STARTED
Message Preview
Setting the Time and Date
➊
➋
➌
➍
➎
All new and stored messages including notebook messages are displayed
in a 2-line format. Pager prompts are not enlarged in the zoom mode.
9
10
From the Function menu, press H to move the cursor to v.
Press K to display the Set-time-and-alarm screen.
Press I to move the cursor to the hour digit.
Press F or G to adjust the hour.
Repeat steps 3 and 4 to adjust the minutes, AM/PM/24 hr., month, day,
and year.
➏ Press K to activate the time and date setting.
Setting the Incoming Message Alert
You can set your pager’s incoming message alert to an audible alert, a
vibrating alert, a chirp (short beep) alert, a chirp alert with vibration, or no
message alert (completely silent).
Note: Priority messages always have an audible alert.
zv 03:15PM 05/05/97z
Example of Set-Time Screen
If you move the cursor past the last symbol in the row (far right), it
automatically wraps around to the first symbol in the beginning of the same
row (far left).
Note: To exit from any screen without making changes, press J .
Setting an Audible Alert
ALERTS
SET TIME
TIME AND DATE
c12:00AM --/--/--
a sample of each alert as you move through the selections.
ALERTS
alert to confirm your selection.
LOCKING MESSAGES
Locking and Unlocking Messages
➍ Press K to activate your selection. The pager gives a sample of the
13
Setting the Alert Pattern
12
➊ From the Function menu, press H to move the cursor to l.
➋ Press K to display the Choose alert menu.
➌ Press H or I to move the cursor to the desired alert. The pager gives
Note: If P is not displayed in the Standby screen, your pager is already in
the silent alert mode.
➊ From the Function menu, press H to move the cursor to r.
➌ Press K to activate the silent alert. The pager vibrates to confirm your
selection. The P symbol is removed from the Standby screen.
When P is displayed on the Standby screen, your pager is in the audible
alert mode.
You can set your pager to alert audible with a standard alert (1), one of
seven pleasing alerts (2-8), a chirp alert (j), or a chirp and vibrate alert
(|). You can also select no message alert (r).
Your pager must be in the audible alert mode (P displayed in the Standby
screen) to select an alert pattern.
11
Setting a Silent (Vibrate) Alert
➊ From the Function menu, press H to move the cursor to s.
➋ Press K.
Up to 10 messages can be locked to prevent them from being deleted or
from being replaced when memory is full.
When a message is locked, the m symbol is replaced by the g symbol
indicating the message is locked.
To Lock or Unlock a Message
➊ From the Message-status screen, press H or I to select the message
you want to lock or unlock.
➋ Press K .
➌ Press I to move the cursor to g to lock the message, or h to unlock
the message.
➍ Press K.
To lock or unlock a message while reading it, follow steps 2 through 4
above while the message is displayed.
14
Your pager has an alarm that can be set for a specific time and date, or a
specific time on a daily basis.
At the selected alarm time, your pager alerts. If the alarm times passes
without being acknowledged, Q flashes until any button is pressed.
To Delete a Single Message
➊ From the Message-status screen, press H or I to select the message
➋
➌
➍
➎
you want to delete.
Press K .
Press I to move the cursor to A.
Press K. DELETE MESSAGE? is displayed.
Press K again to delete the message.
To Delete a Message while Reading It
Follow steps 2 through 5 above while the message is displayed.
To Delete All Unlocked, Un-alarmed and Read Messages
➊ From the Function menu, press I to move the cursor to C.
➋ Press K. DELETE ALL MESSAGES? is displayed.
➌ Press K. All unlocked, un-alarmed and read messages are deleted.
PAGER ALARMS
Pager Alarm
This feature allows you to delete unlocked and un-alarmed messages.
DELETING MESSAGES
Deleting Messages
To Set a One-Time Alarm
➊ From the Function menu, press H to move the cursor to v.
➋ Press K. The Set-time-and-alarm screen is displayed.
➌ Press G. The Set-alarm screen is displayed.
zv 03:15PM 05/05/97z
zc15:30PM 05/05/97z
SET ALARM
Example of Set-Alarm Screen for a Specific Time and Date
Note: Notebook messages are not deleted with this feature.
16
15
17
To Set the Alarm to Alert Daily
➊ Follow steps 1 through 8 in “To Set a One-Time Alarm” to set the alarm
time.
PAGER ALARMS
➋ When setting the date in step 8, press G until you see double dashes for
PAGER ALARMS
The alarm symbol shows the current alarm status. cis displayed if the
alarm is enabled, e is displayed if the alarm is disabled.
➍ Press I to move the cursor to the alarm symbol.
➎ Press F or G until c is displayed.
➏ Press I to move the cursor to the hour digits.
➐ Press F or G to adjust the hour digits.
➑ Repeat steps 6 and 7 to adjust the minutes, AM/PM/24 hr., and date.
➒ Press K to activate your selection. The Q symbol is displayed on the
Standby screen.
Note: To exit from any screen without making changes, press J.
the month, day, and year (--/--/--).
zv 03:15PM 05/05/97z
zc15:30PM --/--/--z
SET ALARM
Example of Set-Alarm Screen for a Daily Alert
➌ Press K to activate your selection. The alarm is now set to alert every
day at the specified time and Q is displayed on the Standby screen.
Note: To exit from any screen without making changes, press J.
18
➍ Press K. The Set-message-alarm screen is displayed.
To Set a One-time Message Alarm
➊ From the Message-status screen, press H or I to select the message
you want to alarm.
➋ Press K.
➌ Press I to move the cursor to d.
MESSAGE ALARMS
This feature allows you to set a one-time or daily alarm for a selected
personal message. You can set an alarm for up to five personal messages.
When a message alarm is set, b replaces m in the Message-status
screen. At the time the alarm sounds, m is again displayed unless the
alarm is set to alert daily. Press J to display the message for which the
alarm is set. If the alarm times passes without being acknowledged, b
flashes until the message is read.
MESSAGE ALARMS
Message Alarms
➐ Press F or G to adjust the hour digits.
➑ Repeat steps 6 and 7 to adjust the minutes, AM/PM/24 hr., and date.
➒ Press K to activate your selection.
the month, day, and year (--/--/--).
➌ Press K to activate your selection. The alarm is now set to alert every
day at this specified time.
Note: To exit from any screen without making changes, press J.
You can select a time period during which your pager is completely silent.
Your pager still receives messages but is does not alert. The pager alerts
only if an alarm expires or a priority message is received.
To Set Private Time
PRIVATE TIME
➊ Follow steps 1 through 8 to set the message alarm time.
➋ When setting the date in step 8, press G until you see double dashes for
The alarm symbol shows the current alarm status. c is displayed if the
message alarm is enabled, e is displayed if the message alarm is
disabled.
➎ Press F or G until c is displayed.
➏ Press I to move the cursor to the hour digits.
Private Time
MESSAGE ALARMS
To Set a Daily Message Alarm
Example of Set-Message-Alarm Screen
20
19
You can also set a message alarm while reading the message by following
steps 2 through 9 above.
zv 03:15PM 05/05/7z
zc15:30PM 05/05/97z
SET ALARM
➊ From the Function menu, press H to move the cursor to 3.
➋ Press K.
When the Private-time screen is first displayed, the cursor is at the flashing
symbol on the far left, 3 indicates private time is enabled, µindicates
private time is disabled.
ON
3
OFF
3:15PM
5:00PM
Example of Set Private-Time Screen
21
22
➌
➍
➎
➏
➐
PRIVATE TIME
To Disable Private Time
Press K.
Press H to move the cursor to 3.
Press K.
Press and release G until µis displayed.
Press K to disable private time.
Note: To exit from any screen without making changes, press J.
➊
➋
➌
➍
➎
INFORMATION SERVICES
Maildrop/Information Service Option
Press and release G until 3 is displayed.
Press I to move the cursor to the hour digit.
Press F or G to adjust the hour digit.
Repeat steps 4 and 5 to adjust the on and off time setting .
Press K to activate your selection.
The symbol _ is displayed in the Standby screen when private time is
enabled.
Note: If the on time is equal to the off time, private time is not enabled.
to the desired maildrop.
➋ Press K.
➌ Press I to move the cursor to j alert on or k alert off.
➍ Press K to turn the maildrop alert on or off.
25
INFORMATION SERVICES
➊ From the Message-status screen, press H, I, or G to move the cursor
VjV
P
Q
(
3:15PM
05/05/97
Example of Maildrop Indicators
Maildrop Alerts
When this option is enabled, you can set your pager to alert when maildrop
messages are received.
• A V in the maildrop message area indicates the alert is off for that
maildrop. A j indicates the alert is on for that maildrop.
Selecting a Maildrop Alert
INFORMATION SERVICES
Turning Individual Maildrop Alerts On and Off
mgmmomm
24
23
• If the pager’s incoming message alert is set to silent (vibrate), all
maildrops with the alert set to on (j), produce a 2-second vibration
when a maildrop message is received.
• If the pager’s incoming message alert is set to audible, the maildrop
alert can be set to either the standard alert, one of the seven pleasing
alerts, a chirp alert, a chirp and silent alert, or no message alert via the
Choose-alert menu. The length of the maildrop alert is 2 seconds.
• If the pager’s incoming message alert is set to no message alert,
maildrop alerts cannot be set and all maildrop symbols are automatically
displayed as V.
Your pager is capable of receiving maildrop messages, also known as
information services. Maildrop messages are received and read the same
way as personal messages and the icon indicators are located on the
second row of the display.
➊ From the Message-status screen, press H, I, or G to move the cursor
➋
➌
➍
➎
➏
26
to the desired maildrop.
Press K.
Press I to move the cursor to j.
Press K. The choose alerts menu is displayed.
Press H or I to move the cursor to the desired alert.
Press K to activate the alert. The pager gives a sample of the alert,
unless no message alert is selected.
Storing Personal and Maildrop Messages in Your Notebooks
Notebooks
VjVj
u
u
Personal Message
Notebook
Maildrop Message
Notebook
3:15PM
05/05/97
Example of Notebook Locations
NOTEBOOKS
mmm
➊ From the Message-status screen, press F , G, H, or I to move the
NOTEBOOKS
Your pager has two notebook areas, a personal notebook for storing
personal messages, and a maildrop notebook for storing information
service messages. Notebook messages are indicated by u. Personal
messages are indicated on the first row of the display. Maildrop messages
are indicated on the second row of the display.
cursor to the personal or maildrop message you want to move into the
notebook.
➋ Press K.
➌ Press I to move the cursor to u.
➍ Press K. The message is now in the notebook.
Deleting Messages from Your Notebooks
➊ From the Message-status screen press F , G, H, or I to move the cursor
to the notebook from where you want to delete a message.
➋ Press J to display a list of the notebook messages.
28
27
➌ Press F or G to scroll through the list until Ku is displayed at the
Message Storage
beginning of the notebook message you want to delete.
Your pager can store up to 19 personal messages in memory.
Note: Stored messages differ from locked messages. They can be
deleted or overwritten when memory is full and a new message comes in.
zuTake children to school
Look at new stock rates
Congratulations on your
Press K to display the Function menu.
Press I to move the cursor to A.
Press K. DELETE MESSAGE? is displayed.
Press K to delete the message.
Repeat steps 3 through 7 for each message you want to delete.
Note: Notebook messages are deleted one at a time. If all messages are
deleted from a notebook, the u symbol is removed from the display.
➍
➎
➏
➐
➑
29
FEATURES
Example of Notebook Screen in Delete Mode
NOTEBOOKS
Automatic Message Deletion
If all 19 message slots are full and a new message is received, the oldest,
unlocked, un-alarmed, and previously read message is automatically
deleted when a new message is received. When the message memory is
full, n is displayed.
Note: To prevent specific messages from being deleted, lock them. Then
you can delete all other messages you no longer need to prevent the
overflow condition.
Out of Range
If your pager has this feature, and if you are outside your paging coverage
area, T is displayed. As long as T is displayed, your pager cannot
receive messages.
30
Key Click
Battery Gauge
If this feature is enabled, and the pager is in the audible mode, a “click” is
emitted when any of the pager’s buttons are pressed. The click is not
emitted when the pager is in the silent mode.
A battery gauge indicator keeps you informed of the battery level. The
indicators are listed on the card attached to the back cover.
Duplicate Message
To clean smudges and grime from the exterior of your pager, use a soft,
non-abrasive cloth moistened in a mild soap and water solution. Use a
second cloth moistened in clean water to wipe the surface clean. Do not
immerse in water. Do not use alcohol or other cleaning solutions.
The symbol 7 is displayed if a potentially errored character is received. The
indicator alternately flashes with a “best guess” of the errored character.
Alphanumeric and Long Numeric Missing Fragment Indicators
CARE AND USE
Errored Data Indicator
FEATURES
If the same message is received more than once, DUPLICATE MESSAGE
is displayed at the beginning of the new message. The new duplicate
message replaces the older duplicate message and contains the latest
time and date stamp.
Cleaning Your Pager
Functionality and Use of Your Pager
For questions pertaining to the functions and use of your Motorola pager,
please visit our web site at www.mot.com/pagers or in the U.S.,
call 1-800-548-9954 or 1-800-793-7834 (TDD). For questions pertaining to
your paging service, contact your paging service provider.
If part of a message has not been received @ or ? is displayed in
place of the missing characters.
32
31
Battery Information
The Advisor Elite pagers are durable, reliable, and can provide years of
dependable service; however, they are precision electronic products.
Water and moisture, excessive heat, and extreme shock may damage the
pager. Do not expose your pager to these conditions. If repair is required,
the Motorola Service Organization, staffed with specially trained
technicians, offers repair and maintenance facilities throughout the world.
You can protect your pager purchase with an optional extended warranty
covering parts and labor. For more information about warranties, please
contact either your paging service provider, retailer, or Motorola, Inc. at
1-800-548-9954. For repairs, call Motorola, Inc. at 1-800-548-9954 in the
U.S. or 1-800-323-9685 in Canada. In the U.S., to contact Motorola, Inc. on
your TDD, call 1-800-793-7834.
Your pager is designed to operate with a single AA-size alkaline battery (carbon
zinc batteries are not recommended). See the diagram on the following page
for the battery door location.
33
Installing/Replacing the Battery
BATTERY
CARE AND USE
Care and Maintenance
To install or replace the battery, hold the pager face down and proceed as
follows:
➊ Unlock the battery door by sliding the door latch away from the battery
door.
➋ Slide the battery door in the direction of the arrow (toward the outer
edge).
➌ Lift the battery door away from the housing to remove it.
➍ Lift the battery out of the battery compartment, taking note of the
positive (+) and negative (-) markings on the battery and the pager
housing.
34
➊
Advisor Elite Pager
Battery Replacement (rear view)
To install a new battery, reverse this procedure, taking note of the positive
(+) and negative (-) markings.
CAUTION: Do not insert the battery backwards or all messages will be erased.
NOTES
➋
BATTERY
➌
Ì
35
Patent Information
BATTERY
NOTES
This Motorola product is manufactured under one or more Motorola U.S.
patents. These patent numbers are listed inside the housing of this
product. Other U.S. patents for this product are pending.
t, Motorola, Advisor Elite, and F
are trademarks or registered trademarks of Motorola, Inc.
© 1997 by Motorola, Inc. All Rights Reserved.
Paging Products Group
1500 Gateway Blvd., Boynton Beach, FL 33426-8292
Printed in U.S.A. 9/97
@[email protected]
6881029B40-A
Advisor Elite™ Quick Reference Card
Turning Your Pager On
Locking and Unlocking Messages
Press J.
➊ From the Message-status screen,
➊ From the Function Menu, press H to
move the cursor to q.
➋ Press K twice.
Function Menu
Provides access to the features
described in this quick reference card and
in your user’s guide.
➊ Press K.
➋ Press H or I to move within the
Function menu.
Receiving/Reading Messages
➊ Press any button to stop the alert.
➋ Press J to display your message.
➌ Press J to view the next screen.
Storing Messages in Your
Notebooks
➊ From the message-status screen,
press F , G, H, or I to move the cursor
to the message you want to move into
the notebook.
➋ Press K.
➌ Press I to move the cursor to u.
➍ Press K to store the message.
Private Time On
➊ From the Function menu, press H to
move the cursor to 3.
➋ Press K.
➌ Press and release G until 3 is
displayed.
press H or I to select the message
you want to unlock/unlock.
➋ Press K.
➌ Press I to move the cursor to g
lock or h unlock.
➍ Press K.
Deleting Messages
➊ From the Message-status screen,
press H or I to select the message
you want to delete.
➋ Press K.
➌ Press I to move the cursor to A.
➍ Press K twice.
➊ From the Function menu, press H to
➋
➌
➍
➎
➏
move the cursor to v.
Press K.
Press I to move the cursor to the hour
digit.
Press F or G to adjust the hour.
Repeat steps 3 and 4 to adjust the
minutes, AM/PM/24 hr., month, day,
and year.
Press K to activate the setting.
Setting Alarms
➊ From the Function menu, press H to
move the cursor to v.
➋ Press K.
➌ Press G.
➍ Follow steps 3 and 4 in Setting
Message Status Symbols
theTime and Date to set the on and off
times.
➎ Press K to activate your selection.
To turn private time off, in step 4 above,
press and release G until µ is displayed.
To Enable/Disable Display Zoom
➊ From the Function menu, press H to
move the cursor to 1 enable or 4
disable.
➋ Press K.
Pager Symbols
g
j
V
m
n
b
N
P
_
Q
Power On
Audible Alert Mode on
Private Time enabled
Alarm enabled
INTRODUCTION
Turning Your Pager Off
Setting the Time and Date
u
Locked Message
Maildrop Alert Enabled
Maildrop Alert Disabled
Personal Message
Memory Full
Alarmed Message
Notebook
Function Menu Symbols
l
v
3
1
4
r
s
2
a
A
C
g
h
j
Choose Alert
Set Time and Alarm
Set Private Time
Display Zoom On
Display Zoom Off
Set Silent Alert
Set Audible Alert
Turn Pager Off
Escape (to Message-status screen)
Delete Message
Delete All Messages
Lock Message
Unlock Message
Turn Maildrop Alert On
➍ Press I to move the cursor to the
alarm symbol.
➎ Press F or G until c is displayed.
➏ Follow steps 3 through 6 in Time and
Date to set the alarm time.
To disable the alarm, in step 5 above,
press F or G until eis displayed.
To set a message alarm:
➊ With the message displayed, press K.
➋ Press I to move the cursor to d.
➌ Press F or G until c is displayed.
➍ Follow steps 3 through 6 inSetting the
Time and Date.
Note: To set a daily pager or message
alarm, press G until double dashes are
displayed for the month, day, and year
(--/--/--).
k
d
u
Turn Maildrop Alert Off
Set Message Alarm
Add to Notebook
Other Symbols
Message Continuation
24 Hour Time
AM Time
PM Time
c Enable Alarm
e Disable Alarm
3
Private Time Enabled
µ
Private Time Disabled
, Low Battery Indicator
+ 1/4 Battery Indicator
* 1/2 Battery Indicator
) 3/4 Battery Indicator
( Full Battery Indicator
D Out of Range
S
Truncated Message
7 Errored Data Indicator
@ Alphanumeric Missing Fragment
Indicator
? Long Numeric Missing Fragment
Indicator
t
y
w
x
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement