Navigon 21xx max GPS Receiver User Manual
User’s Manual
NAVIGON 21xx max
English (United Kingdom)
June 2008
The crossed-out wheeled bin means that within the European Union
the product must be taken to separate collection at the product end-oflife. This applies to your device but also to any enhancements marked
with this symbol. Do not dispose of these products as unsorted
municipal waste.
Imprint
NAVIGON AG
Schottmüllerstraße 20A
D-20251 Hamburg
The information contained herein may be changed at any time without prior
notification. Neither this manual nor any parts thereof may be reproduced for any
purpose whatsoever without the express written consent of NAVIGON AG, nor may
they be transmitted in any form either electronically or mechanically, including
photocopying and recording. All technical specifications, drawings etc are subject to
copyright law.
© 2008, NAVIGON AG
All rights reserved.
User’s Manual NAVIGON 21xx max
Table of contents
1
Introduction .......................................................................................6
1.1
About this manual.....................................................................................6
1.1.1
1.1.2
1.2
Legal notice ..............................................................................................6
1.2.1
1.2.2
1.3
2
Questions about the product ....................................................................7
2.1
Scope of Delivery .....................................................................................7
2.2
Description of the NAVIGON 21xx max ...................................................8
2.3
Important safety information.....................................................................8
2.4
2.5
Navigating with GPS ..............................................................................14
Options in the Start window....................................................................15
Password Lock................................................................................15
4.1
Activating password protection...............................................................16
4.2
Changing a password.............................................................................16
4.3
Cancelling password protection .............................................................16
4.4
Forgotten your password?......................................................................16
Operating the NAVIGON 21xx max................................................17
5.1
Information .............................................................................................17
5.2
Software keyboard .................................................................................19
5.2.1
5.2.2
6
Installing the navigation system in the vehicle...........................11
TMC antenna .............................................................................13
Memory card..............................................................................13
Switching on the NAVIGON 21xx max ..........................................14
3.1
5
Navigation safety information ......................................................9
Safety information for the navigation device................................9
Safety guidelines when installing the device in your car ...........10
Preparing the NAVIGON 21xx max for use............................................11
2.4.1
2.4.2
2.4.3
4
Liability.........................................................................................6
Trademarks .................................................................................7
Before you begin...............................................................................7
2.3.1
2.3.2
2.3.3
3
Conventions.................................................................................6
Symbols .......................................................................................6
Special keys ..............................................................................19
Entering data .............................................................................20
5.3
Options ...................................................................................................21
5.4
Menus.....................................................................................................21
Navigation .......................................................................................21
6.1
Starting the navigation application .........................................................22
User’s Manual
Table of contents Š III
User’s Manual NAVIGON 21xx max
6.2
Specifying a destination .........................................................................23
6.2.1
6.2.2
6.2.3
6.2.4
6.2.5
6.2.6
6.2.7
6.2.8
6.2.9
6.2.10
6.3
Managing destinations ...........................................................................33
6.3.1
6.3.2
6.4
Saving destinations ...................................................................33
Defining a destination as home address ...................................33
Multi-leg routes.......................................................................................33
6.4.1
6.4.2
6.4.3
6.4.4
6.4.5
6.4.6
6.4.7
Entering the starting point..........................................................34
Entering route points .................................................................34
Editing route points....................................................................35
Managing routes ........................................................................35
Calculating and displaying routes..............................................36
Simulating routes .......................................................................36
Starting navigation.....................................................................37
6.5
Options in the navigation application......................................................37
6.6
Working with the map.............................................................................39
6.6.1
6.6.2
6.6.3
6.6.4
6.6.5
6.7
Maps ..........................................................................................39
Map in Preview mode ................................................................39
Map in Navigation mode............................................................41
Reality View PRO ......................................................................43
Map in Destination search mode ...............................................44
Useful functions......................................................................................46
6.7.1
6.7.2
6.7.3
6.7.4
6.7.5
7
Specifying the country in which the destination is situated........23
Entering an address ..................................................................24
Points of interest........................................................................25
Information about the destination ..............................................28
Last Destinations .......................................................................29
Favourites ..................................................................................29
Contacts ....................................................................................30
Navigating home........................................................................30
Selecting destinations on the map.............................................31
Starting navigation.....................................................................31
Emergency Services..................................................................46
GPS Status, saving the current location....................................46
Turn-by-Turn List .......................................................................47
TMC (Traffic Information) ..........................................................48
Logbook .....................................................................................49
Handsfree Module (only NAVIGON 2150 max) .............................50
7.1
Connecting to a telephone .....................................................................50
7.2
Taking a call ...........................................................................................51
7.3
Making a call ..........................................................................................51
7.3.1
7.3.2
7.3.3
7.3.4
7.3.5
Dialling a telephone number......................................................51
Dialling a Speed Call number to call home................................52
Calling a contact from the phone book ......................................52
Calling most recently dialled, received or missed numbers.......52
Transferring a call from your mobile telephone .........................52
IV Š Table of contents
User’s Manual
User’s Manual NAVIGON 21xx max
7.4
During a call ...........................................................................................53
7.4.1
7.4.2
7.4.3
7.4.4
7.5
Configuring the hands-free function .......................................................53
7.5.1
7.5.2
7.5.3
7.6
9
10
Preset ........................................................................................54
Handsfree Settings ....................................................................54
Bluetooth Function.....................................................................55
Connection with Mobile Phone...............................................................55
7.6.1
7.6.2
7.6.3
8
Moving the navigation application into the foreground ..............53
Entering numbers ......................................................................53
Transferring a call to the mobile phone .....................................53
Ending the call ...........................................................................53
Establishing a connection from the navigation device...............55
Establishing a connection from the mobile phone .....................56
Disconnecting the connection and deleting the connection
data............................................................................................56
Pictures............................................................................................57
8.1
Suitable files ...........................................................................................57
8.2
Opening the picture viewer.....................................................................57
8.3
Selecting an image file ...........................................................................57
8.4
Operating the picture viewer ..................................................................58
8.5
Play-back mode......................................................................................58
Configuring the NAVIGON 21xx max ............................................59
Appendix .........................................................................................61
10.1 Technical data ........................................................................................61
10.2 Identification and serial number .............................................................62
10.3 Declaration of conformity........................................................................62
11
12
Troubleshooting..............................................................................63
Index ................................................................................................64
User’s Manual
Table of contents Š V
User’s Manual NAVIGON 21xx max
1
Introduction
1.1
About this manual
1.1.1
Conventions
For better legibility and clarification, the following styles are used in this
manual:
Bold and italics:
Registered names, company and product
descriptions.
SMALL CAPITALS:
Window and dialogue box titles.
Bold:
Highlighting of important parts in the text.
Underlined:
Names of buttons, input boxes and other user
interface elements.
Underlined and italics:
Names of control elements on the navigation
device.
1.1.2
Symbols
The following symbols refer to specific passages of text:
Instructions and tips for operating the software
More detailed information and explanations
Warnings
1.2
Legal notice
1.2.1
Liability
The software and manual are subject to change without notice.
NAVIGON AG is not liable for the accuracy of the information contained
in this manual or for damages resulting from the use of this manual.
Suggestions for improvements and information regarding errors are
always welcome so that we can supply you with even better products in
the future.
-6-
Introduction
User’s Manual NAVIGON 21xx max
1.2.2
Trademarks
All brand and trade marks mentioned in this document and registered
by third parties are subject without reservation to copyright law and the
proprietary rights of their respective owners. All trade marks, trade
names and company names used in this document are or may be trade
marks or registered trademarks of their respective owners. All rights
reserved except those explicitly granted.
If the registered trademarks used in this manual are not explicitly
identified as such, this does not imply that the name is not subject to the
rights of a third party.
►
►
1.3
Microsoft, Outlook, Excel and Windows are registered trade marks
of Microsoft Corporation.
NAVIGON is a registered trade mark of NAVIGON AG.
Questions about the product
You have a question concerning your product? Then visit our webseite
www.navigon.com and click on "Support". There you will find an area
with frequently asked questions (FAQ Center) along with details of how
to contact us by phone or e-mail.
2
Before you begin
2.1
Scope of Delivery
Please check that the contents are complete. If anything is missing, get
in touch immediately with the dealer who sold you the product.
The purchased product includes the following:
►
NAVIGON 21xx max navigation device
►
Car cradle
►
►
►
►
Before you begin
Car charger cable (12V adapter for the vehicle's cigarette lighter)
with integrated TMC antenna
USB cable
SD card with software and navigation cards (the SD card is already
inserted in the navigation device)
Leaflet with illustrated installation instructions
-7-
User’s Manual NAVIGON 21xx max
2.2
2.3
Description of the NAVIGON 21xx max
1
Touch-screen
2
Microphone
3
Slot for removing the rear wall
4
Reset
1
5
LED
6
Mini USB socket for USB cable / car charger cable
7
Slot for SD / SDHC memory card
8
On/Off
9
Connection for external GPS antenna
Important safety information
In your own interest, please read the following safety information and
warnings carefully before starting up your navigation system.
1
-8-
Only NAVIGON 2150 max
Before you begin
User’s Manual NAVIGON 21xx max
2.3.1
Navigation safety information
Use the navigation system at your own risk.
Caution! To prevent accidents, do not operate the navigation system
while driving.
Caution! Do not look at the display unless it is absolutely safe to do so!
Caution! Traffic regulations have priority over any instructions from the
navigation system.
Caution! Follow the instructions of the navigation system only when the
circumstances and the road traffic regulations allow you to do so! The
navigation system will still guide you to your destination even if you
deviate from the calculated route.
Caution! Check that the cradle is secured and adjusted properly before
each journey.
Note: If you have not understood the spoken instructions or are unsure
about what to do next, you can refer briefly to the map or schematic
view of your navigation system.
2.3.2
Safety information for the navigation device
Caution! Protect the device from moisture. The device is neither
waterproof nor protected against splash water.
Caution! Do not open the case of the navigation device under any
circumstances.
Caution! Do not expose the navigation device to extreme heat or cold.
This may damage the device or impair its function. (See "Technical
data" on page 61)
Note: Do not kink the cable. Make sure that the cable cannot be
damaged by sharp-edged objects.
Note: Clean the navigation device only with a damp cloth.
Note: Do not unplug by pulling the cable. Doing so could damage the
cable!
Before you begin
-9-
User’s Manual NAVIGON 21xx max
Note: Create a backup of the data contained on the memory card
provided. This is very easy to do with the NAVIGON Fresh software
which can be downloaded free of charge from our website
www.navigon.com/max.
1
Note: The memory card must remain inserted in the device during
operation of the navigation system.
Note: Use only SD or MMC memory cards! Make sure that the memory
card contacts are clean and undamaged.
2.3.3
Safety guidelines when installing the device in your car
Caution! Fasten the cradle so that the navigation device is easy to see
and operate by the driver. Make sure that the driver's view of the traffic
is not impeded.
Caution! Do not attach the cradle within the working zone of any
airbags.
Caution! Do not fasten the cradle too close to the steering wheel or
other controls. The driver must not be obstructed in operating any car
functions.
Caution! When installing the cradle, make sure that it will not pose a
risk in the event of an accident.
Caution! Do not run cables directly next to safety-relevant devices and
power supplies.
Caution! Check the cradle regularly to make sure that it is securely
seated. The suction cup may become loose after a while.
Caution! After installation, check all safety-relevant equipment in the
car.
Caution! Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
Caution! Disconnect the car charger cable from the cigarette lighter
whenever you park the car. The integrated mains adapter always
consumes a small amount of energy and could drain the car battery.
- 10 -
Before you begin
User’s Manual NAVIGON 21xx max
2.4
Preparing the NAVIGON 21xx max for use
2.4.1
Installing the navigation system in the vehicle
Caution! Be sure to refer to all the safety information in chapter
"Important safety information" on page 8.
Assembling the cradle
►
Assemble the cradle as shown in the illustration. No tools are
needed for this.
Securing the cradle
1. Clean that part of the windscreen to which you want to secure the
cradle. The windscreen must be dry and free of dirt and grease.
2. Open the lever on the suction cup as far as possible. You must feel
it engage in the 'Open' position.
3. Place the cradle suction cup against the windscreen.
4. Press the lever towards the windscreen.
Before you begin
- 11 -
User’s Manual NAVIGON 21xx max
Inserting the navigation device into the cradle
1. Insert the navigation device into the lower lugs of the bracket. (See
illustration)
2. Then press the device towards the cradle until you hear the upper
clip latch in place.
Supplying power to the navigation device
Included in delivery of the NAVIGON 21xx max is a car charger cable
with which power can be supplied to the navigation device via the
vehicle's cigarette lighter.
►
Connect the car charger cable to the vehicle's cigarette lighter and
to the mini USB socket of the navigation device.
Note: Without delay, plug the USB connector into the navigation device
as far it will go! (See "Troubleshooting" on page 63)
Caution! Connect the car charger cable only to cigarette lighters with
an operating voltage of 10-24V.
The LED on the bottom of the navigation device lights orange during
charging.
The LED goes out when the battery is fully charged.
Note: It takes approx. 4-5 hours to charge a flat battery.
A fully charged battery enables 3 hours of use.
Removing the navigation device from the cradle
1. Press the upper clip of the cradle towards the windscreen.
2. Tilt the navigation device slightly towards yourself.
3. Remove the device from of the cradle.
- 12 -
Before you begin
User’s Manual NAVIGON 21xx max
2.4.2
TMC antenna
The NAVIGON 21xx max has an integrated TMC receiver. The TMC
antenna is integrated in the car charger cable. Once the car charger
cable is connected, the device can receive current traffic messages. If
required, it can change your route dynamically, e.g. in order to avoid a
traffic jam.
2.4.3
Memory card
A memory card with the software and card data is already inserted in
the navigation device.
You can copy these data to another memory card or save them on your
PC. To do so, use the NAVIGON Fresh software which can be
downloaded free of charge from www.navigon.com/max.
1
The following memory media can be used in the NAVIGON 21xx max:
►
SD cards with maximum 2 GB
►
SDHC cards
Removing the memory card
1. Switch off the navigation device. To do so, press the
key.
(On/Off)
2. Press the memory card gently into the device until the lock
disengages.
3. Let go of the memory card. It will now project slightly out of the
device.
4. Pull the memory card out of the slot.
Inserting a memory card
1. Insert the memory card into the device (see illustration).
2. Press the card into the device until it locks in place.
Before you begin
- 13 -
User’s Manual NAVIGON 21xx max
Note: The navigation application works only when the memory card
contains the navigation software and card data. You can still view
pictures when a different memory card is inserted.
2.5
Navigating with GPS
GPS is based on a total of at least 24 satellites orbiting the Earth and
continuously transmitting signals of their position and time. The GPS
receiver tracks this data and calculates its own geographical position
based on the different position and time data transmitted by the various
satellites.
Data from at least three satellites is required for positioning with an
acceptable degree of accuracy. With data from four or more satellites it
is possible in addition to determine the position's altitude above sea
level. Positioning is accurate to within three metres.
Once the navigation device has determined your position, this position
can be used as a starting point for calculating a route.
The map data on your navigation device includes the geographical
coordinates of all digitally recorded points of interest, streets and
places. This enables the device to calculate a route between a starting
point and a destination.
Calculation of the current position and its representation on the map
takes place once every second. In other words, your current position is
always shown on the map.
3
Switching on the NAVIGON 21xx max
1. Press the
(On/Off) key.
If password protection has been activated, the ENTER PASSWORD
window opens.
2. Enter the password.
3. Tap on OK.
The START window opens.
Note: When you switch on the NAVIGON 21xx max for the first time,
you will be asked to make the following settings:
►
your preferred language for using for the software
►
the unit of length for distances
►
the time format
From the START window you can access all applications of the
NAVIGON 21xx max:
- 14 -
Switching on the NAVIGON 21xx max
User’s Manual NAVIGON 21xx max
►
Navigation, see page 21
►
Pictures, see page 57
►
Phone (Handsfree Module), see page 50.
1
Note: If you have not used the NAVIGON 21xx max for a long time, the
battery may be flat.
In this case the device needs to be charged for approximately 3 minutes
before it can be switched on.
Forgotten your password?
If you forget your password, follow the procedure described in
"Forgotten your password?" on page 16.
3.1
Options in the Start window
You can access more functions via the Options button.
1. Tap on Options to open the options list.
2. Tap on the option you would like to use.
►
If you would like to quit the options list without selecting an option,
tap on the Options button again.
Settings: This is where you configure the settings which apply for all
applications of the NAVIGON 21xx max, e.g. language, brightness and
time format. For more details refer to chapter "Configuring the
NAVIGON 21xx max" on page 59.
Password Lock: You can protect your navigation system from unauthorised use
by creating a password. (Refer to page 15)
Product Information: Here you are shown the version numbers and copyright
details of the hardware and software.
Touchscreen Calibration: The touch-screen can be re-calibrated if it responds
poorly to touch. Follow the instructions on the screen.
Factory Settings: Resets all settings to the as-delivered state. Routes and
saved destinations are not deleted. The software is re-started and
behaves as if started for the first time after being purchased. (Refer to
"Switching on the NAVIGON 21xx max” page 14)
4
Password Lock
You can protect your navigation system from unauthorised use by
creating a password.
1
Password Lock
Only NAVIGON 2150 max
- 15 -
User’s Manual NAVIGON 21xx max
4.1
Activating password protection
1. In the START window, tap on Options > Password Lock.
The NEW PASSWORD window opens.
2. Enter a new password in the New password box.
3. Enter this password again in the Confirm new password box.
4. Tap on Activate.
Note: The password must have exactly 4 digits.
4.2
Changing a password
1. In the START window, tap on Options > Password Lock.
The ENTER PASSWORD window opens.
2. Enter the currently valid password in the Enter password box.
3. Tap on Change password.
The NEW PASSWORD window opens.
4. Enter a new password in the New password box.
5. Enter this password again in the Confirm new password box.
6. Tap on Activate.
Note: The new password must have exactly 4 digits.
4.3
Cancelling password protection
1. In the START window, tap on Options > Password Lock.
The ENTER PASSWORD window opens.
2. Enter the currently valid password in the Enter password box.
3. Tap on Deactivate.
4.4
Forgotten your password?
If you have forgotten your password, proceed as follows:
1. Tap on Info.
- 16 -
Password Lock
User’s Manual NAVIGON 21xx max
2. Follow the instructions on the screen.
5
Operating the NAVIGON 21xx max
5.1
Information
Various information icons are located at the top of many windows.
GPS
The GPS icon is visible only in the navigation application. It can indicate
the following GPS reception states:
No GPS (No symbol): The built-in GPS receiver is not operational.
Contact customer service if the problem persists.
No Signal: Data is being received from less than three satellites.
Position cannot be calculated.
GPS Ready: Data is being received from at least three satellites. The
position of the vehicle can be calculated.
For details of the GPS status refer to chapter "GPS Status, saving the
current location" on page 46.
Compass
The Compass icon is visible only in the navigation application. It shows
you in which direction you are currently moving. It can indicate the
following points of the compass: N, NE, E, SE, S, SW, W, NW.
TMC (Traffic Information)
The NAVIGON 21xx max has an integrated TMC receiver which
provides the navigation system with traffic information updates. If
necessary it can change your route dynamically, for example in order to
avoid a traffic jam.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC icon is visible only in the navigation application. It can indicate
the following TMC reception states:
Tuning: The TMC receiver is operational but cannot find a station that
is transmitting TMC signals. There are no active traffic messages.
Operating the NAVIGON 21xx max
- 17 -
User’s Manual NAVIGON 21xx max
Tuning: The TMC receiver is operational but cannot find a station that
is transmitting TMC signals. Traffic messages are active however. This
can be the case, for example, when travelling through a tunnel.
TMC on Standby: Traffic messages can be received.
Note: The TMC antenna is integrated in the car charger cable. The
Tuning icon may still appear therefore when the car charger cable is
not connected to the NAVIGON 21xx max.
For details of the TMC function refer to chapter "TMC (Traffic
Information)" on page 48.
Energy
The Energy icon can indicate the following states of the integrated
battery:
The device is being supplied by an external power source. The battery
is fully charged.
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
Bluetooth / Phone (only NAVIGON 2150 max)
The NAVIGON 2150 max has an integrated Bluetooth hands-free
module. This enables you to use the device as a hands-free kit for a
mobile phone with Bluetooth capability.
The LED on the bottom of the NAVIGON 2150 max lights blue when
the Bluetooth function is active. For more details refer to chapter
"Handsfree Module" on page 50.
The Phone icon can indicate the following states of the hands-free
module:
No Bluetooth (No symbol): The Bluetooth function is deactivated..
Not connected (red mobile phone): The NAVIGON 2150 max has no
Bluetooth connection to another device.
Connected (white mobile phone): The NAVIGON 2150 max is
connected to a mobile phone and can be used as a hands-free kit.
- 18 -
Operating the NAVIGON 21xx max
User’s Manual NAVIGON 21xx max
Call in Progress (green mobile phone): The hands-free module of the
NAVIGON 2150 max is being used for a phone call.
Muting
The Muting icon is visible only in the navigation application. It can
indicate the following states:
No symbol: The navigation application is not muted.
Muting: The navigation application is muted. If the device is navigating
at the moment, you will not hear any driving instructions.
Note: This icon indicates only that the navigation instructions are
1
muted. It says nothing about the volume of the hands-free kit.
5.2
Software keyboard
A software keyboard appears on the screen when text entries are
necessary.
All entries can be made on the software keyboard using your fingertips.
Only capital letters can be entered.
When entering town or street names you need not enter any special
characters or umlauts. The navigation system fills in these characters
for you automatically. If, for example, you are searching for “Würzburg”,
then simply enter "WURZBURG". Special characters may be helpful
however when naming saved destinations and routes.
5.2.1
Special keys
inserts a space.
deletes the character in front of the cursor.
opens the keyboard with numerals.
Latin, Cyrillic and Greek alphabet
opens the keyboard with the Latin alphabet.
opens the keyboard with the Cyrillic alphabet.
opens the keyboard with the Greek alphabet.
1
Only NAVIGON 2150 max
Operating the NAVIGON 21xx max
- 19 -
User’s Manual NAVIGON 21xx max
When you want to enter addresses, names or special destinations, the
keyboard with the alphabet for the country in question will open
automatically.
When you want to save a destination to Favourites or when you enter a
special destination category or a country, the keyboard with the
alphabet of the user interface will open automatically.
You can also switch from the Cyrillic or Greek keyboard to the Latin
keyboard. Many addresses can then also be entered as transliterations
or in the language of the user interface.
Example: The language of the user interface is English. You want to
navigate to Moscow. You have the following options:
►
"Москва" (Cyrillic)
►
"Moskva" (transliterated)
►
"Moscow" (English).
Note: Street names and place names can be entered only in the
language of the user interface if that is how they exist in the map's
database.
Note: The maximum number of keyboards is always two.
Umlauts, accents and other letters
Another keyboard with special characters is available for each alphabet.
opens the keyboard with Latin special characters.
opens the keyboard with Cyrillic special characters.
opens the keyboard with Greek special characters.
As soon as you have entered a special character the letter keyboard
reappears.
5.2.2
Entering data
Often you can select an entry from a list. This is the case for example
when you want to enter a city.
As soon as you enter the first letter, the largest city which begins with
this letter in the country in question will appear.
Enter more letters and after each entry the first city which begins with
these letters will appear.
►
- 20 -
When the correct city appears, tap on
complete the entry.
(OK) in order to
Operating the NAVIGON 21xx max
User’s Manual NAVIGON 21xx max
You can open at any time a list containing all the cities which begin with
the letters or include the text already entered. The more letters you
enter, the shorter the list becomes.
►
Tap on
(Open List) to call up this list.
(Up) button and the
You can use the
move through the list.
►
(Down) button to
Tap on an entry in the list to select it and transfer it to the input box.
The list closes once an entry has been selected. You are now
finished with entering the city.
►
5.3
Tap on
an entry.
(Close List) in order to close the list without selecting
Options
Some windows offer options that lead to more functions.
For details of all the options available refer to the following chapters:
"Options in the Start window" on page 15
"Options in the navigation application" on page 37
5.4
Menus
Some buttons have menus which open when activated.
Tap on a menu point to execute its function.
If you would like to quit the options list without selecting a function, tap
on the button you used to open the menu.
6
Navigation
Use the navigation system at your own risk.
Caution! Be sure to refer to all the safety information in chapter
"Important safety information" on page 8.
Impaired GPS reception
If GPS reception is impaired, navigation will be interrupted. The
navigation application remains in the foreground.
As soon as GPS reception is restored, the navigation system calculates
any change of position which has occurred in the meantime. You can
then simply continue navigation.
Navigation
- 21 -
User’s Manual NAVIGON 21xx max
Arriving at your destination
When you have reached your selected destination, a message to this
effect will be displayed.
Only your current position (orange arrow) will now be shown on the
map.
6.1
Starting the navigation application
You have switched on the navigation device and, if necessary, entered
the password. The START window is open.
1. Tap on Navigation.
The navigation application will be started. When you start the
navigation application for the first time, the following message will
appear:
"Please note that the road traffic regulations are prior to the
instructions of the navigation system. Please do not operate the
device while driving."
2. After you have read and fully understood the message, tap on OK.
If you do not accept the content of the message, tap on Cancel in
order to close the navigation application.
The NAVIGATION window is opened. From here you can access all
the functions of the navigation application.
►
►
NAVIGON 2150 max: Tap on
(Phone) in order to move
the hands-free module into the foreground.
Tap on
(Back) in order to move the START window back
into the foreground.
Initialising the GPS receiver
As soon as the navigation device has been switched on, initialisation of
the GPS receiver will begin.
The integrated GPS receiver is not initialised for the first time until the
navigation application is started for the first time. It can take up to
20 minutes to initialise the GPS receiver for the first time.
Note: If the GPS icon indicates GPS Ready after far less than
20 minutes, it is advisable to leave the navigation device switched on
for at least another 15 minutes in order to ensure reliable operation of
the receiver.
Each time you switch on the navigation device after this, GPS reception
will start within a short time.
If the navigation device has not been switched on for more than a week,
it can take up to 10 minutes to re-initialise the receiver.
- 22 -
Navigation
User’s Manual NAVIGON 21xx max
In the top right hand corner of the display, you will see the GPS icon. As
soon as data from at least three satellites is received, the icon will
change to
(GPS Ready).
Note: Initialisation takes the least time if you do not start driving until
the initialisation has finished.
For more details about the GPS icon refer to chapter "GPS" on
page 17.
Returning to the Navigation window
The NAVIGATION window opens when the navigation application is
started.
If another window of the navigation application is open, tap on
(Back). This will return you to the window you came from.
►
6.2
Tap on
opened.
(Back) repeatedly until the NAVIGATION window is
Specifying a destination
Under New Destination you can enter destinations to which you have
not yet navigated or which you have not saved.
Here you can enter an address, select a special destination, or select a
destination from the quick search function.
Note: The first time that you want to enter a new destination you will be
asked to select the country in which your destination is situated.
Under My Destinations the NAVIGON 21xx max provides the following
lists of destinations and addresses for you to select from:
►
►
►
6.2.1
LAST DESTINATIONS: destinations to which you have navigated on a
previous occasion.
FAVOURITES: all destinations that you have saved in the
NAVIGON 21xx max.
CONTACTS: all destinations which you have imported from Microsoft
Outlook.
Specifying the country in which the destination is situated
At top left in the ADDRESS, POI IN A TOWN and POI NATIONWIDE
windows you will find the Country button. It bears the flag of the country
in which you can currently select destinations for the navigation
application.
Navigation
- 23 -
User’s Manual NAVIGON 21xx max
If your destination is in a different country, then proceed as follows:
1. Tap on the Country button.
2. Enter the first letter of the country in which your destination is
situated.
The COVERED COUNTRIES list opens. It shows all the countries
which begin with this letter and for which a map is available.
3. Tap on the country in which your destination lies.
The COVERED COUNTRIES list closes.
The button bears the flag of the destination country.
Note: The selection list contains only those countries whose maps are
on the SD card.
6.2.2
Entering an address
1. In the NAVIGATION window, tap on New Destination > Enter an
Address.
The ADDRESS window opens.
2. Enter the name or the postal code of the destination town.
3. Enter the name of the destination street.
4. Enter the house number. If you don't know the number of the
house, then leave this box empty.
If you don't know the house number but know the name of a nearby
cross street, then tap on the Cross Street box and enter the name
of this street. The navigation system will calculate a route to the
intersection of the streets you have entered.
Note: It is not necessary to enter all the address details.
If you specify the town only, the navigation system will calculate a route
to the town centre.
If you specify only the town and street without specifying a house
number or cross street, the navigation system will calculate the best
route to this street.
5. Tap on Start Navigation.
Sometimes the destination cannot be found exactly because, for
example, the entered combination of place and street name exists
several times.
- 24 -
Navigation
User’s Manual NAVIGON 21xx max
In this case a window will open with a list of all the addresses
matching your entry plus additional information.
If the entered house number is not included on the map, the window
will show an address with the house number closest to the one
entered.
►
Tap on the address to which you want to navigate.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
6.2.3
Points of interest
Points of Interest, also called POI (Points Of Interest) for short, are
useful addresses that are catalogued according to particular criteria.
Special destinations include ports, airports, restaurants, hotels, petrol
stations, public buildings, doctor's surgeries, hospitals, shopping
centres, etc.
POI can be represented on the map by symbols. Tap in the NAVIGATION
window on Options > Settings > POI in order to select the categories
you want to appear on the map.
POI nearby
POI nearby are special destinations located within a certain radius of
your current location. This means you can always find the nearest petrol
station for example, no matter where you are.
Note: GPS reception must be good enough for determining your
position. Check the
(GPS Ready) icon to see whether GPS
reception is good enough.
For more details refer to chapter "Initialising the GPS receiver" on
page 22.
Note: The Direct Access section offers 3 categories of POI from the
current vicinity which can be searched for quickly and without additional
entry.
For more details refer to chapter "Direct access to POI" on page 28.
1. Tap in the NAVIGATION window on New Destination > Search for
POI > Nearby.
The POI NEARBY window opens.
2. Select a category from which you would like to find a POI.
Navigation
- 25 -
User’s Manual NAVIGON 21xx max
If sub-categories exist for the category you have selected, the Sub
Category list opens.
3. Select the sub-category from which you would like to select a POI.
The Name of the Destination list opens. It contains the nearest POI
in the specified category, sorted by distance.
4. Tap on the name of the destination.
5. Tap on Start Navigation.
Sometimes the destination cannot be found exactly because, for
example, several restaurants with the same name exist.
In this case a window opens with all the destinations matching your
entry plus additional information.
►
Tap on the destination to which you would like to navigate.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
POI of nationwide significance
POI of nationwide significance are airports, sights, national monuments,
large ports etc. This way you can find well-known places of interest
even if you don't know the name of their location.
1. In the NAVIGATION window, tap on New Destination > Search for
POI > Nationwide.
The POI NATIONWIDE window opens.
2. Select a category from which you would like to find a POI.
The Name of the Destination list opens. It contains the POI from the
selected category, sorted alphabetically.
3. If the list is very long:
►
Tap on
(Close List).
The keyboard appears.
►
►
Enter a number of letters from the destination.
Tap on
(Open List).
The list now contains only those destinations which begin with or
contain the letters entered.
- 26 -
Navigation
User’s Manual NAVIGON 21xx max
4. Tap on the name of the destination.
5. Tap on Start Navigation.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
POI in a particular location
POI in a particular location can be useful when navigating in an
unfamiliar town.
1. In the NAVIGATION window, tap on New Destination > Search for
POI > in a Town.
The POI IN A TOWN window opens.
2. Enter the name or the postal code of the destination town.
3. Select a category from which you would like to find a POI.
If sub-categories exist for the category you have selected, the Sub
Category list opens.
4. Select the sub-category from which you would like to select a POI.
The Name of the Destination list opens. It contains POI from the
specified category, sorted alphabetically.
5. If the list is very long:
►
Tap on
(Close List).
The keyboard appears.
►
►
Enter a number of letters from the destination.
Tap on
(Open List).
The list now contains only those destinations which begin with or
contain the letters entered.
6. Tap on the name of the destination.
7. Tap on Start Navigation.
Sometimes the destination cannot be found exactly because, for
example, several restaurants with the same name exist in the town
in question.
Navigation
- 27 -
User’s Manual NAVIGON 21xx max
In this case a window opens with all the destinations matching your
entry plus additional information.
►
Tap on the destination to which you would like to navigate.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
Direct access to POI
The direct access area contains 3 categories of POI. Destinations in
your vicinity that correspond to one of these categories can be viewed
here quickly and without further entry.
►
Tap in the NAVIGATION window on Options > Settings > POI in order
to select the categories for direct access.
Note: GPS reception must be good enough for determining your
position. Check the
(GPS Ready) icon to see whether GPS
reception is good enough.
For more details refer to chapter "Initialising the GPS receiver" on
page 22.
1. In the NAVIGATION window, tap on New Destination.
The NEW DESTINATION menu opens.
In the Direct Access area you are shown the icons of those POI
catgeories that are available by direct access.
2. Tap on the category from which you would like to select a POI.
The Name of the Destination list opens. It contains the nearest POI
in the specified category, sorted by distance.
3. Tap on the name of the destination.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
6.2.4
Information about the destination
For many destinations that you specify, there will be further information
available, stored in the navigation system's database.
- 28 -
Navigation
User’s Manual NAVIGON 21xx max
There is, for example, a telephone number available for many
restaurants. You can then call the restaurant to reserve a table, for
example.
One of the destination entry windows described above is open.
►
Tap on Options > Info.
The DESTINATION INFO window opens. It contains all the information
about the specified destination that is stored in the navigation system's
database.
►
►
►
Tap on Cancel in order to close the DESTINATION INFO window
again.
Tap on
map.
(Show on Map) in order to see the destination on the
NAVIGON 2150 max: Tap on
indicated.
(Call) in order to call the number
Note: The Call function is available only when the
NAVIGON 2150 max is connected via Bluetooth to a mobile
phone.
For more details about connecting to a mobile phone refer to
chapter "Connecting to a telephone" on page 50.
6.2.5
Last Destinations
NAVIGON 21xx max saves the last 12 destinations to which you have
navigated in the LAST DESTINATIONS list.
1. In the NAVIGATION window, tap on My Destinations > Last
Destinations.
2. Tap on the destination to which you would like to navigate.
3. Tap on Start Navigation.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
6.2.6
Favourites
Destinations to which you want to travel often can be saved in the
FAVOURITES list.
In the FAVOURITES list you can save up to 500 destinations.
Navigation
- 29 -
User’s Manual NAVIGON 21xx max
Information on how to save a destination can be found in chapter
"Saving destinations" on page 33.
1. In the NAVIGATION window, tap on My Destinations > Favourites.
2. Tap on the destination to which you would like to navigate.
3. Tap on Start Navigation.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
6.2.7
Contacts
You can use the NAVIGON Sync software to export to your navigation
system the contact addresses which you have saved in Microsoft
Outlook on your computer.
Note: The NAVIGON Sync software can be downloaded free of charge
from www.navigon.com/max.
Contacts which have been saved with several addresses will appear
once with each address in the CONTACTS list.
1. In the NAVIGATION window, tap on My Destinations > Contacts.
2. Tap on the address to which you want to navigate.
3. Tap on Start Navigation.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
6.2.8
Navigating home
In NAVIGON 21xx max you can save an address as your home
address. You can navigate to your home address at anytime by
activating a single button.
Further information about entering your home address can be found in
chapter "Defining a destination as home address" on page 33.
►
- 30 -
In the NAVIGATION window, tap on Take Me Home.
Navigation
User’s Manual NAVIGON 21xx max
If you have not yet entered your home address, a dialog box will
notify you of this.
Navigation starts. The route profile used for the previous navigation
will be applied.
6.2.9
Selecting destinations on the map
You may select a destination directly on the map. This is a quick way to
select towns, streets and POI.
1. In the NAVIGATION window, tap on Show Map.
2. Tap on
(Destination search)
The map opens in Destination search mode.
3. Tap on the point to which you want to navigate.
Note: Please refer to chapter "Map in Destination search mode" on
page 44 for detailed information on how to change the map view so that
your destination is easily seen.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
4. Tap on
(OK).
The DESTINATION ON MAP window opens. The detailed address data
of the selected destination is displayed in the upper left-hand
corner.
5. Tap on Take Me There.
The map opens in Preview mode. The destination is indicated on
the map.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 31. Please read on there.
6.2.10
Starting navigation
The map is open in Preview mode.
The navigation destination is depicted by a small flag. The route and the
estimated trip time are indicated.
Navigation
- 31 -
User’s Manual NAVIGON 21xx max
Route Profile
The route is calculated on the basis of a route profile.
►
If you want to view or change the route profile, tap on Route Profile.
Note: If you change the route profile, the changes will also apply to
future navigations.
Information about individual route profile settings can be obtained by
tapping on the related
(Help) button.
Turn-by-Turn List
►
If you want to see detailed directions for the route, tap on Options >
Turn-by-Turn List.
For details of the functions in the TURN-BY-TURN LIST window refer to
chapter "Turn-by-Turn List" on page 47.
Start Navigation
►
Tap on Start Navigation or simply start driving.
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
►
►
Wait. As soon as GPS reception is good enough for determining
your position, the route will be recalculated and navigation will
begin.
Tap on Cancel. The window in which you entered your destination
will open again. Your destination is saved in the LAST DESTINATIONS
list.
Tap on Demo. The route will be calculated using the centre of the
destination location as starting point. Navigation will then be
simulated on this route.
Tap on
(Back) in order to terminate the demonstration.
Note: If you selected the destination on the map, then the Demo button
is not available.
- 32 -
Navigation
User’s Manual NAVIGON 21xx max
6.3
Managing destinations
Every destination you enter and destinations from the LAST
DESTINATIONS and CONTACTS lists can be saved in the FAVOURITES list.
This makes sense if you frequently navigate to a particular destination.
6.3.1
Saving destinations
1. Enter a destination. (Refer to "Entering an address" on page 24 or
to "Points of interest" on page 25). Do not tap on the Start
Navigation button!
2. Tap on Options > Save Destination.
- OR –
1. Select a destination from the LAST DESTINATIONS list or from the
CONTACTS list. (Refer to "Last Destinations" on page 29 or to
"Contacts" on page 30). Do not tap the Start Navigation button!
2. Tap on Options > Save as Favourite.
3. Enter a name for the destination.
4. Tap on Save.
6.3.2
Defining a destination as home address
One destination from the FAVOURITES list can be defined as your home
address.
You can then always start navigation to this destination very quickly by
tapping in the NAVIGATION window on Take Me Home.
1. Select the destination which you want to define as your home
address from the FAVOURITES list. (Refer to "Favourites” page 29)
2. Tap on Options > Home Address.
The selected destination has now been saved as your home address.
Your home address now appears in the FAVOURITES list marked by a
house symbol.
6.4
Multi-leg routes
It is possible to plan routes without GPS reception, for example in the
comfort of your home. Planned routes can be saved for later use. This
allows you to plan as many routes as you like, for example for your
holidays.
1. In the NAVIGATION window, tap on Options.
The options list opens.
2. Tap on the Route Planning option.
Navigation
- 33 -
User’s Manual NAVIGON 21xx max
The ROUTE PLANNING window opens.
6.4.1
Entering the starting point
The starting point of a route is the point at which you want to begin your
trip. This is not necessarily the current location. If you are planning a
route for your holidays at home, you could, for example, enter your
hotel as the starting point.
The starting point is only important if you want to see a planned route
on the map but currently have no GPS reception, or if you are not
currently at the planned starting point. This is why your selected starting
point has the flow number "0".
As soon as you start navigation, your current location will be used as
the starting point for the route calculation.
The first leg of the route is therefore the journey to the route point with
flow number "1".
1. Tap on the Specify Starting Point box.
The STARTING POINT menu opens.
If you want to enter your current location as the starting point:
2. Tap on the Current Position menu item.
If you want to enter a different starting point:
2. Tap on the corresponding button.
3. Enter the starting point. (Refer to the corresponding section of
chapter "Specifying a destination" on page 23 ff.)
4. Tap on Set Starting Point.
The selected starting point will now be displayed next to the 0
button (Starting Point).
Changing the starting point
►
Tap on the Specify Starting Point box.
The STARTING POINT menu opens. You can now enter a different
starting point. Proceed as described above.
6.4.2
Entering route points
The route points of a route are the destinations that you want to
navigate to.
The flow number for each route point is indicated on a button in front of
it.
1. Tap on the Add Route Point box.
The ROUTE POINT menu opens.
- 34 -
Navigation
User’s Manual NAVIGON 21xx max
2. Tap on the button for how you want to enter the destination.
3. Enter the route point. (Refer to the corresponding section of chapter
"Specifying a destination" on page 23 ff.)
4. Tap on Add.
The selected route point is now shown next to its flow number.
Repeat these steps for each destination that you want to add to your
route.
6.4.3
Editing route points
Route points can be deleted from a route. The order of the route points
can be changed as you wish.
Note: The start point (flow number "0") can be neither moved nor
deleted.
►
Tap on the route point that you want to edit.
The context menu contains the following buttons:
Route Point Up: Moves the selected route point further to the front.
(Example: route point 2 becomes route point 1).
Route Point Down: Moves the selected route point further to the
back. (Example: route point 2 becomes route point 3).
Delete: Deletes the selected route point. A dialog window prompts
you to confirm deletion.
6.4.4
Managing routes
You can save each planned route under a particular name.
Note: Only the start point and route points will be saved, not the
calculated route. When you load a saved route, it must be recalculated
before navigation can start.
You can load, rename or delete stored routes.
Saving routes
The ROUTE PLANNING window is open. You have entered the starting
point and at least one route point.
1. Tap on Options > Save Route.
2. Enter a name for the route.
Navigation
- 35 -
User’s Manual NAVIGON 21xx max
3. Tap on Save.
The route is now saved to the SAVED ROUTES list. The dialog
window closes.
Loading routes
1. Tap on Options > Saved Routes.
2. Tap on the route that you want to load.
3. Tap on Load Route.
The ROUTE PLANNING window opens. The starting point and the
route points of the loaded route have been entered.
6.4.5
Calculating and displaying routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The ROUTE PLANNING window is open. The starting point and at least
one route point have been entered.
1. Tap on Show Route.
The map opens in Preview mode.
The starting point and the route points are marked by flags. The
distance and the estimated trip time is given for each leg of the
route. The same data are also displayed for the entire route.
6.4.6
Simulating routes
It is also possible simply to simulate navigation on a planned route.
Note: GPS reception is not necessary for simulation.
If you have planned a multi-leg route, only the first leg will be simulated.
You have calculated and displayed a route.
►
Tap on Options > Simulation.
The route will be recalculated for simulation purposes. Simulation
starts when calculation has finished.
Stopping simulation
You can stop simulation at any time.
►
Tap on
(Back).
The ROUTE PLANNING window opens.
- 36 -
Navigation
User’s Manual NAVIGON 21xx max
6.4.7
Starting navigation
You have calculated and displayed a route.
Route Profile
The route is calculated on the basis of a route profile.
If you want to view or change the route profile, tap on Route Profile.
Note: If you change the route profile, the changes will also apply to
future navigations.
Information about individual route profile settings can be obtained by
tapping on the related
(Help) button.
Turn-by-Turn List
If you want to see detailed directions for the route, tap on Options >
Turn-by-Turn List.
For details of the functions in the TURN-BY-TURN LIST window refer to
chapter "Turn-by-Turn List" on page 47.
Start Navigation
►
Tap on Start Navigation or simply start driving.
No GPS reception
If GPS signal reception is not good enough, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
►
6.5
Wait. As soon as GPS reception is good enough for determining
your position, the route will be recalculated and navigation will
begin.
Tap on Cancel. The NAVIGATION window opens.
Options in the navigation application
Some windows offer options that lead to more functions.
►
Tap on Options to open the options list.
►
Tap on the option you would like to use.
►
Navigation
If you would like to quit the options list without selecting an option,
tap on the Options button again.
- 37 -
User’s Manual NAVIGON 21xx max
Add to Route: Opens the route planning. The selected address will be entered
as the starting point of a new route.
For more details refer to chapter "Multi-leg routes" on page 33.
Delete All: Deletes all destinations in the list (LAST DESTINATIONS list or
FAVOURITES list, depending on where you opened the options). The list
is then empty. A dialog window prompts you to confirm deletion.
Delete: Deletes the selected destination from the LAST DESTINATIONS or
FAVOURITES list or the selected route from the SAVED ROUTES list. A
dialog window prompts you to confirm deletion.
Emergency Services: Opens a window in which your current location is
indicated.
NAVIGON 2100 | 2110 max: You will also see the emergency phone
number for the country in question. You can dial this number on
a mobile phone.
NAVIGON 2150 max: If the NAVIGON 2150 max is connected to a
mobile phone, you can have yourself connected directly to the
emergency call centre.
For details about connecting to a mobile phone refer to chapter
"Handsfree Module" on page 50.
GPS Status: Opens the GPS STATUS window. Here you can see details
regarding GPS reception. You can also save the data of your current
location.
For more details refer to chapter "GPS Status, saving the current
location" on page 46.
Home Address: Saves the selected destination as your home address. You can
then always start navigation to this destination very quickly by tapping in
the NAVIGATION window on Take Me Home.
New Route: Deletes the starting point and all route points from the ROUTE
PLANNING window so that you can plan a new route.
If necessary, save the previously planned route!
Rename: Opens a window in which you can change the name for the selected
destination or route.
Route Planning: Opens the ROUTE PLANNING window. Here you can plan
routes, manage planned routes and start navigation on a planned route.
For more details refer to chapter "Multi-leg routes" on page 33.
Route Profile: Opens the ROUTE PROFILE window. Here you can view the
options for route planning and, if necessary, change them.
Save as Favourite: Saves the selected destination to the FAVOURITES list.
For more details refer to chapter "Saving destinations" on page 33.
- 38 -
Navigation
User’s Manual NAVIGON 21xx max
Save Destination: Saves the selected address in the FAVOURITES list.
For more details refer to chapter "Saving destinations" on page 33.
Save Route: Opens a window in which you can save the planned route under a
specific name.
For more details refer to chapter "Saving routes" on page 35.
Saved Routes: Opens a dialog window into which you can load a saved route.
Settings: Opens the SETTINGS window. Here you can configure the navigation
system.
For more details refer to chapter "Configuring the NAVIGON 21xx max"
on page 49.
Show on Map: Shows the selected address on the map.
Simulation: Simulates a navigation on the route indicated. This simulation can
be performed without GPS reception. On multi-leg routes, only the first
leg is simulated.
Traffic: Opens the TRAFFIC INFORMATION window in which pending reports are
listed.
For more details refer to chapter "TMC (Traffic Information)" on
page 48.
Turn-by-Turn List: Shows detailed directions for the route, including all points at
which you must turn.
For details of the functions in the TURN-BY-TURN LIST window refer to
chapter "Turn-by-Turn List" on page 47.
6.6
Working with the map
6.6.1
Maps
Each country has its own navigation map. Seamless navigation over
several maps on one continent is possible however if a continuous
route can be calculated with the maps saved on the device.
Even if maps from several continents are saved on the memory card in
your navigation device, the NAVIGON 21xx max can only ever work
with maps from one continent.
Tap in the NAVIGATION window on Options > Settings > Current Map in
order to see which maps are currently in use. Here you can also select
a different continent if the memory card in the navigation device
contains any maps of countries on other continents.
6.6.2
Map in Preview mode
You have entered a destination and tapped on Start Navigation.
Navigation
- 39 -
User’s Manual NAVIGON 21xx max
- OR –
You have planned or loaded a route and tapped on Show Route.
The map opens in Preview mode. The entire route is visible.
1
The route is highlighted in orange.
2
Your current position is indicated (orange arrow).
If you display a planned or loaded route and the specified starting point
is not your current location, then it is possible that your current position
will not be shown on the preview.
3
The destination is marked with a little flag.
If you display a planned or loaded route, the starting point and each
route point will be marked with a little flag.
4
You will see the total distance for the route in a small info box, together
with the estimated trip time and the estimated time of arrival.
You can select to show or hide this information in Options > Settings >
Basic Settings.
If you display a multi-leg route, you will see this information for each leg.
►
►
Tap on Route Profile in order to view and, if required, change the
settings which form the basis for the route planning.
Tap on Start Navigation to start the trip.
If you display a planned or loaded route, the route may be
recalculated. The starting point for the calculation will now be your
current location. You will first be guided to the first route point
entered.
►
►
- 40 -
Tap on Options > Turn-by-Turn List to view detailed directions for
the route. (Refer to "Turn-by-Turn List” page 47)
Tap on
(Destination search) in order to view the map in
Destination search mode. (Refer to "Map in Destination search
mode” page 44)
Navigation
User’s Manual NAVIGON 21xx max
6.6.3
Map in Navigation mode
After the route was shown in Preview mode, navigation was started.
The map opens in Navigation mode.
1
Here you can see the signposting which you must follow.
2
Here you can see any speed limits which are in force.
3
The route is highlighted in orange.
4
When two manoeuvres need to be executed in quick succession, the
small arrow box indicates the second manoeuvre to be executed.
5
The large arrow box shows a schematic depiction of the next junction at
which you must make a turn. The distance remaining to this junction is
indicated underneath.
As you get closer to the junction you will see a spot diagram in addition
to the distance:
The nearer you get to the junction, the more yellow spots are displayed.
If you don't have to change direction for a long time, you will see only a
straight arrow. The distance you must continue straight on is indicated
underneath the arrow.
►
Tap on the large arrow box to hear current route instructions.
6
Ahead of many junctions the information from 7 and 8 is hidden. Instead
you are shown which lanes lead to your destination.
7
The height above sea level and the current speed are indicated here.
8
In the Total box you can see the distance remaining to the destination,
the estimated duration of the trip and the estimated time of arrival.
Navigation
- 41 -
User’s Manual NAVIGON 21xx max
9
Your current position is indicated on the map (orange arrow). The
section of the map displayed changes continually so that your current
position is always in view on the map.
10
If you are navigating a multi-leg route, you will see the remaining
distance to the next interim destination, the estimated duration of the
trip and the estimated time of arrival in the Next box.
11
The name of the next stretch of road that you must travel on is
displayed in the upper street box.
12
The name of the stretch of road that you are currently travelling on is
displayed in the lower street box.
Note: The displays of many of the above mentioned areas can be
configured in Options > Settings > Basic Settings. Some displays will
only function if the required information is available on the map..
Note: If you tap on the large arrow box, the current route instruction will
be repeated.
►
►
Tap on Options > Turn-by-Turn List to view detailed directions for
the route. (Refer to "Turn-by-Turn List” page 47)
Tap on
(Destination search) in order to view the map in
Destination search mode. (Refer to "Map in Destination search
mode” page 44)
Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
1. Tap on
(Volume).
The volume bar opens. It contains three buttons for adjusting the
volume.
(Louder),
2. Tap on
(Quieter),
(Volume on/off).
(Volume) again or wait a few seconds.
The volume bar closes.
Quitting navigation
Tap on
(Back) in order to quit navigation. A dialog box will
prompt you to confirm.
- 42 -
Navigation
User’s Manual NAVIGON 21xx max
Functions of the map in Navigation mode
When the map is open in Navigation mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D: Changes between 2D and 3D mode. The icon indicates the current
mode.
Day/Night: Changes between "Day" and "Night" display modes. The icon
indicates the current mode.
Interim Destination: Opens the menu for entering an interim destination.
The navigation system will first guide you to this interim destination.
Afterwards you can continue your original navigation.
Skip Route Point: Tap on this button to omit the next route point. This button is
active only when at least 2 route points still lie ahead of you. (See
"Multi-leg routes" on page 33)
Block: Tap on this button in order to block a section of the route that lies in
front of you, i.e. to recalculate the route in order to avoid this section,
e.g. if you have heard on the radio of a traffic jam affecting this section.
Tap on this button again to remove the block.
POI on Your Route: Tap on this button to display POI on your route. This way
you can quickly find out, for example, how far it is to the nearest
services. A destination shown here can be added as an interim
destination by tapping the
of its entry in the list.
6.6.4
(Interim Destination) button to the right
Reality View PRO
The map switches to Reality View mode when you approach one of the
following points while driving on the motorway:
Navigation
►
a motorway junction
►
a three-leg motorway junction
►
the exit you must take to leave the motorway
- 43 -
User’s Manual NAVIGON 21xx max
The Reality View mode shows with greater clarity the signposting and
lanes you must follow.
This display does not change until you have passed the spot indicated.
The map will then change back to Navigation mode.
►
If you want to change to Navigation mode before then, just tap on
any point on the map.
Note: The Reality View mode is not available for all motorway
junctions and three-leg motorway junctions. Availability depends on the
map material used.
6.6.5
Map in Destination search mode
The map is always in Destination search mode, when a pair of cross
hairs are to be seen. Indicated in the address box are the coordinates
and, where applicable, the name of the street under the cross hairs.
When you are driving, the map does not change. It is always orientated
with north at the top.
Zoom Out: The map section shown becomes larger, but you will see
fewer details.
Zoom In: The map section becomes smaller, but you will see more
details.
Zoom Mode: When this button is active you can mark out a section of
the map with the stylus or your finger.
Mark out the section from upper left to bottom right to zoom in until the
section fills the screen.
Mark out the map section from bottom right to top left to zoom out.
- 44 -
Navigation
User’s Manual NAVIGON 21xx max
Pan Mode: When this button is active you can change the section of
map displayed with the stylus or your finger. Simply drag the map in the
desired direction.
Entire Route: Zooms the map so that the entire route is visible.
Current Position: Selects the section of map displayed so that the
current location is at the centre.
Operating in Destination search mode
1. Tap on the point to which you want to navigate.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap on
(OK).
Buttons with various functions will be displayed.
Take Me There: Starts navigation to the selected point. If you are currently
navigating, this route navigation will be cancelled.
Interim Destination: Sets the selected point as interim destination. The
navigation system will first guide you to this interim destination.
Afterwards you can continue your original navigation.
This function is only active during navigation.
Set as Destination: Adds the selected point to the route planning as the last
point. Navigation will then continue to this point after you have reached
the original destination or the other route points. The function is
available only during navigation.
Save: Opens the SAVE DESTINATION AS... window. You can enter a name under
which the selected point will be saved in the FAVOURITES list.
For more details refer to chapter "Saving destinations" on page 33.
Search Nearby: Opens the POI NEARBY window. Here you can search for
destinations near the selected point. (Refer to "POI nearby” page 25)
►
Navigation
Tap on
(Destination search) in order to quit Destination
search mode. You will be returned to the window from which you
started this mode.
- 45 -
User’s Manual NAVIGON 21xx max
►
Tap on
(Back) in order to return to the NAVIGATION
window. If you are currently navigating, you will be prompted to
confirm your decision to quit navigation.
6.7
Useful functions
6.7.1
Emergency Services
If you arrive at the scene of an accident or have an accident yourself, it
may be necessary to phone the emergency number and give your
current location.
►
Tap on Options > Emergency Services.
The EMERGENCY SERVICES window opens.
NAVIGON 2100 | 2110 max: The nation-wide emergency phone
number in the country in question is indicated.
If GPS reception is good enough, the address and the geographic
cooordinates of your current location will be indicated.
NAVIGON 2150 max: If the NAVIGON 2150 max is connected to a
mobile phone, you can have yourself connected directly to the
emergency call centre.
►
Tap on the Emergency Services (in red) button.
You will now be connected to the emergency call centre. If the
connection fails, a dialog box will tell you which number to dial
on your mobile phone in order to get through to the emergency
call centre.
Note: In some countries you can get through to the emergency call
centre with the number shown only if you use a mobile phone. Another
number may be necessary for landline calls.
6.7.2
GPS Status, saving the current location
In the GPS STATUS window you will find an overview of the data the
navigation system calculates from the GPS signals it receives.
The GPS status can be accessed from the options button in many
windows.
►
Tap on Options > GPS Status.
The current location can be saved in the FAVOURITES list.
1. Tap on Save Position.
The SAVE DESTINATION AS... dialog box opens.
2. Enter a name for the destination.
3. Tap on Save.
- 46 -
Navigation
User’s Manual NAVIGON 21xx max
6.7.3
Turn-by-Turn List
You can display detailed directions of the calculated route before
starting navigation or at any time during navigation. This list displays all
of the driving instructions in table form.
The map is open in Preview mode, Navigation mode or Reality View
mode.
►
Tap on Options > Turn-by-Turn List.
The TURN-BY-TURN LIST window opens.
1
Schematic depiction of the next junction where you must make a turn.
2
Distance to this junction.
3
Route instruction and if available the name of the street into which you
must turn.
4
Indicates whether you want to drive on the route section in question or
not.
(Allow): The section in question is allowed on the route.
(Forbid): The section in question is not allowed on the route.
Blocking route sections
1. Tap on the route sections that you do not want to travel on so that
the
(Forbid) symbol appears next to them.
2. Tap on
> Modify Route.
The navigation system calculates an alternative route avoiding the
route sections selected. The new driving instructions are displayed
in the TURN-BY-TURN LIST window.
3. Tap on
window again.
Navigation
(Back) in order to close the TURN-BY-TURN LIST
- 47 -
User’s Manual NAVIGON 21xx max
Removing blocks and using original routes
Section blocks can be removed at any time.
►
6.7.4
In the TURN-BY-TURN LIST window, tap on Options > Calculate
Original Route.
TMC (Traffic Information)
The integrated TMC receiver enables the navigation system to make
use of current traffic messaging. If necessary it can change your route
dynamically, for example in order to avoid a traffic jam.
Displaying traffic information
Current traffic information is available via the options button in many
windows.
1. Tap on Options > Traffic.
The TRAFFIC INFORMATION window opens.
Above the list the Traffic Information button indicates the type of
traffic information listed and how many messages of this type there
are in the list.
2. Tap on Traffic Information in order to select the messages you want
displayed.
For each traffic message in the list you are shown information about the
location of the traffic obstruction and its type.
►
Tap on a message to display this information in detail.
The navigation system can Detour (
) or Ignore (
the route. The button shows the active status.
►
►
) congestion on
Tap on the button to select the alternative setting.
Tap on
window again.
(Back) in order to close the TRAFFIC INFORMATION
TMC Settings
►
In the TRAFFIC INFORMATION window, tap on Options > Traffic.
In the TRAFFIC INFORMATION window you can set the TMC traffic station
and configure whether the reception of a traffic message concerning
your route should affect your route planning and if so how.
Tuning Mode
Tap on Tuning Mode and select a method for selecting the TMC radio
station.
- 48 -
Navigation
User’s Manual NAVIGON 21xx max
►
►
►
Automatic: You can use the arrow keys in the station area to select
another station. The system will search for another station if
reception becomes poor.
Hold station: You can use the arrow keys in the station area to
select another station. The system will search for the same station
on a different frequency if the signal becomes poor.
Hold frequency: You can use the arrow keys in the station area to
select another frequency. The system will not search for another
station if reception becomes poor.
Recalculate Route
Tap on Recalculate Route and select how new traffic messages
concerning your route are to be used.
►
►
6.7.5
Automatically: An alternative route will be calculated automatically.
The system will inform you on the recalculation.
On Request: A window opens with information about the location
and type of traffic obstruction. You can then decide whether an
alternative route is to be calculated or not.
Logbook
You can use the NAVIGON 21xx max to record a logbook. The logbook
is recorded in the "Logbook.xls" file. You can open the file with
Microsoft Excel. Each recorded trip is added at the bottom of the table
as a new entry.
The first time a trip is recorded, the "Logbook.xls" file will be created in
the "Navigon\Logbook" folder on the memory card in the navigation
device. If you delete or move this file, a new file will be created when
you next record a trip.
Note: Trips are recorded simultaneously in another file which is
compatible with the WISO Sparbuch program. This file is called
"MN7DriversLog.bin". It can also be found in the "Navigon\Logbook"
folder on the memory card in the navigation device.
Recording trips
You can have all trips recorded automatically.
1. In the NAVIGATION window, tap on Options > Settings > Logbook.
2. Set Logbook to Yes.
3. Tap on OK.
Every trip from now on will be recorded until you reset Logbook to No. It
is possible, however, to exclude individual trips from the recording.
Navigation
- 49 -
User’s Manual NAVIGON 21xx max
Before a trip
If your trips are recorded in the logbook, a window for entering the trip's
key data is opened before navigation starts. You can also decide,
however, not to record the trip in question.
►
If you don't want to record the trip in question, tap on
(Cancel).
- OR –
1. Enter a name for this entry, e.g. "Trip to customerX", in the Logbook
Entry box.
2. Enter the mileage.
3. Tap on Reason for the Trip and select a reason for the trip from the
list of possibilities.
7
Handsfree Module (only NAVIGON 2150
max)
The hands-free module allows to use the NAVIGON 2150 max as a
hands-free kit for your mobile phone.
Opening the hands-free module
►
Tap in the START window on Phone.
- OR ►
Tap in the navigation application on
(Phone).
The HANDSFREE MODULE window opens.
Operating the hands-free module
All functions can be reached from the HANDSFREE MODULE window.
►
►
7.1
Tap on
(Navigation) in order to move the navigation
application into the foreground.
Tap on
(Back) in order to close the hands-free module and
return to the last, previously opened window.
Connecting to a telephone
The NAVIGON 2150 max must be connected to a mobile phone in
order to use the telephone functions.
If the NAVIGON 2150 max was last connected to the same mobile
phone, then the connection will be established without further
prompting.
- 50 -
Handsfree Module (only NAVIGON 2150 max)
User’s Manual NAVIGON 21xx max
Problems occurring when trying to establish a Bluetooth connection can
have various causes:
►
Bluetooth is deactivated in the hands-free module of the
NAVIGON 2150 max.
Activate Bluetooth. Make sure that the NAVIGON 2150 max can be
detected by other Bluetooth devices. (Refer to "Bluetooth
Function" on page 55)
►
Bluetooth is deactivated on the mobile phone or it is set to "Hidden".
Activate Bluetooth on your mobile phone. Make sure that your
mobile phone can be detected by other Bluetooth devices
For more details refer to your mobile phone manual.
►
It may be that the NAVIGON 2150 max was never connected to
your mobile phone.
Initiate the connection manually. (see "Connection with Mobile
Phone" on page 55)
If the NAVIGON 2150 max is still unable to establish a Bluetooth
connection to your mobile phone, please contact the customer support
office of your mobile phone manufacturer.
7.2
Taking a call
The INCOMING CALL window opens when a call is received. You will be
asked whether you want to take the call. The name and the number of
the caller will be displayed if this information is available..
►
Tap on Yes if you want to take the call.
The CALL IN PROGRESS window opens.
►
Tap on No if you don't want to take the call.
Note: Navigation instructions are muted during a call.
7.3
Making a call
You can make a call in various ways with the NAVIGON 2150 max.
7.3.1
Dialling a telephone number
1. Tap in the HANDSFREE MODULE window on the Keyboard button.
2. Enter the desired telephone number.
3. Tap on the Dial a Number button.
Handsfree Module (only NAVIGON 2150 max)
- 51 -
User’s Manual NAVIGON 21xx max
7.3.2
Dialling a Speed Call number to call home
You can configure 4 speed call buttons.
►
Tap in the window HANDSFREE MODULE on the corresponding speed
call button.
Note: If no number was entered yet for the selected Speed Call button
or if there is no Bluetooth connection to a mobile phone, the MODIFY
PRESET window will open.
For detailed information please refer to chapter "Preset" on page 54.
7.3.3
Calling a contact from the phone book
You can select numbers from the phone book of the mobile phone
which is connected to the NAVIGON 2150 max.
1. Tap in the HANDSFREE MODULE window on Phone Book.
2. Tap on the contact you want to call.
If more than one phone number is saved for this contact, a list with
all the phone numbers saved for the contact will open.
3. Tap on the number you want to dial.
Note: The phone book is not copied permanently to the navigation
device. It is available to the hands-free module only for as long as it is
connected to the mobile phone.
7.3.4
Calling most recently dialled, received or missed numbers
Note: The RECENT CALLS list contains outgoing, incoming and
unanswered calls. Incoming and unanswered calls can be dialed if the
caller's number was transmitted..
1. Tap in the HANDSFREE MODULE window on the Recent Calls button.
2. Tap on the entry you want.
Note: The RECENT CALLS list is not permanently copied to the
navigation device. It is available to the hands-free module only for as
long as it is connected to the mobile phone.
7.3.5
Transferring a call from your mobile telephone
The NAVIGON 2150 max takes over active calls from the mobile phone
automatically as soon as a Bluetooth connection is established between
the two devices.
- 52 -
Handsfree Module (only NAVIGON 2150 max)
User’s Manual NAVIGON 21xx max
7.4
During a call
You are making a call with the hands-free module. The CALL IN
PROGRESS window is open.
7.4.1
Moving the navigation application into the foreground
You can move the navigation application into the foreground at any
time. When the NAVIGON 2150 max is navigating, the map can then
be into the foreground while you make your call.
►
Tap on the
(Navigation) button.
(Call in Progress, green
During a phone call you will see the
mobile phone) icon in the top right corner of the display.
►
7.4.2
Tap on the
(Phone) button in order to open the CALL IN
PROGRESS window again.
Entering numbers
You can enter numbers during a call. This may be the case, for
example, if a further connection via a telephone system is necessary.
1. Tap on Keyboard.
2. Enter the desired numbers.
3. Tap on
window again.
7.4.3
(Back) in order to open the CALL IN PROGRESS
Transferring a call to the mobile phone
►
In the CALL IN PROGRESS window, tap on Options > Use Mobile
Phone.
Pick up the mobile telephone and continue the call.
7.4.4
Ending the call
►
7.5
Tap in the CALL IN PROGRESS window on the Hang up button in
order to end the call.
Configuring the hands-free function
The hands-free module of the NAVIGON 2150 max has a number of
settings which you can configure according to your own needs.
For details of how to use the configuration window refer to "Configuring
the NAVIGON 21xx max" on page 59.
Handsfree Module (only NAVIGON 2150 max)
- 53 -
User’s Manual NAVIGON 21xx max
7.5.1
Preset
The hands-free module of the NAVIGON 2150 max has four Speed
Call buttons which you can configure according to your own needs.
1. In the HANDSFREE MODULE window, tap on Settings > Preset.
The MODIFY PRESET window opens.
2. Tap on the Speed Call button that you want to edit.
Entering a new Speed Call number or editing an existing Speed
Call number
3. Tap on the Edit button.
4. Enter the name and the number for the selected Speed Call button
or edit the existing name and number.
5. Tap on OK.
Adopting a number from the phone book of the mobile phone
3. Tap on the From Phone Book button. This button is deactivated
when there is no connection to a mobile phone.
4. Tap on the entry which you want to adopt for the Speed Call.
5. Tap on OK.
Deleting a Speed Call number
3. Tap on the Delete button.
4. Confirm that you want to delete the Speed Call number.
The MODIFY PRESET window opens again. There is no longer a
phone number or name entered for the selected Speed Call.
7.5.2
Handsfree Settings
In the HANDSFREE SETTINGS window you can configure the phone
functions for the hands-free module of the NAVIGON 2150 max.
►
In the HANDSFREE MODULE window, tap on Settings > Handsfree
Settings.
The HANDSFREE SETTINGS window opens.
Volume of the Phone Call: The volume of the phone call can be controlled
independently of the volume of the navigation application.
Volume of the Ring Tone: The volume of the ring tone can be controlled
independently of the volume of the navigation application.
- 54 -
Handsfree Module (only NAVIGON 2150 max)
User’s Manual NAVIGON 21xx max
7.5.3
Bluetooth Function
►
In the HANDSFREE MODULE window, tap on Settings > Bluetooth
Function.
The BLUETOOTH FUNCTION window opens.
Bluetooth Function: Select whether you want the Bluetooth function activated
(Yes or No).
The hands-free module cannot connect to a mobile phone if the
Bluetooth function is deactivated.
Discoverable by Others: Select whether you want the NAVIGON 2150 max to
be detected by other Bluetooth-compatible devices (in particular mobile
phones) (Yes or No).
Others May Connect: Select whether you want to allow other devices to initiate
a connection (Yes or No).
Note: The Discoverable by Others setting and the Others May Connect
setting are effective only when the Bluetooth function is activated.
A Bluetooth connection can be established from the mobile phone only
when Yes was selected for both settings.
7.6
Connection with Mobile Phone
Note: The Bluetooth functions of both the NAVIGON 2150 max and the
mobile phone must be suitably configured to enable a Bluetooth
connection between the two devices.
For information about configuring the NAVIGON 2150 max refer to
chapter "Bluetooth Function" on page 55.
For details of how to configure the mobile phone refer to the related
manual.
The NAVIGON 2150 max can establish a connection to exactly one
Bluetooth-compatible mobile phone.
As a rule the NAVIGON 2150 max will automatically connect to a
mobile phone to which it was already connected on a previous
occasion. This function can also be used while the NAVIGON 2150
max is connected to a mobile phone in order to establish a connection
to another mobile phone.
7.6.1
Establishing a connection from the navigation device
1. Make sure that the Bluetooth function is activated on both the
mobile phone and the NAVIGON 2150 max.
2. Tap in the HANDSFREE MODULE window on Settings > Connection
with Mobile Phone > New Connection.
Handsfree Module (only NAVIGON 2150 max)
- 55 -
User’s Manual NAVIGON 21xx max
The navigation device looks for Bluetooth devices and lists all the
devices it recognises.
3. Tap on the name of your mobile phone.
The navigation device prompts you to enter a password.
4. Enter a four-digit password (any digits) in the Key box and tap on
OK.
Your mobile phone prompts you to enter a password.
5. Enter the same password as on the NAVIGON 2150 max.
The SETTINGS BT window opens on the NAVIGON 2150 max. The
two devices connect to each other.
Tap on
(Back) in order to return to the HANDSFREE
MODULE window.
7.6.2
Establishing a connection from the mobile phone
Note: Please consult the mobile phone's manual if you are uncertain
about how to carry out the following steps on the mobile phone.
1. Make sure that the Bluetooth function is activated on both the
mobile phone and the NAVIGON 2150 max.
2. Using your mobile phone, search for other Bluetooth devices.
The navigation device is detected as NAVIGON.
3. Inititiate a connection to the detected NAVIGON device.
The mobile phone prompts you to enter a password.
4. Enter a four-digit password (user-defined).
The NAVIGON 2150 max prompts you to enter a password.
5. In the Key box enter the same password as on the mobile phone
and tap on OK.
The HANDSFREE MODULE window opens. A connection is
established between the two devices. The name of the connected
mobile phone is displayed at the bottom edge of the screen.
7.6.3
Disconnecting the connection and deleting the connection
data
You can end the connection between the NAVIGON 2150 max and the
mobile phone at any time.
- 56 -
Handsfree Module (only NAVIGON 2150 max)
User’s Manual NAVIGON 21xx max
Note: You do not need to disconnect the connection manually. The
connection is disconnected automatically when the mobile phone is
moved approximately 10 m from the NAVIGON 2150 max. In this case
the connection data are saved so that the connection can be restored
automatically when the mobile phone is again close enough to the
NAVIGON 2150 max.
1. In the SETTINGS BT window, tap on Connection with Mobile
Phone > Clear Connection Data.
You will be prompted to confirm that you want to disconnect the
connection.
2. Tap on the OK button.
Note: After the connection is disconnected, the NAVIGON 2150 max
will no longer be able to establish an automatic connection to a mobile
phone (not even to the last connected mobile phone).
The next connection to a mobile phone must be established manually
(refer to chapter "Connection with Mobile Phone" on page 55).
8
Pictures
The NAVIGON 21xx max can show image files which are saved on the
memory card in the navigation device.
Note: If your camera uses SD cards, you can insert the card from the
camera. However, the navigation application will work only if the
memory card with the navigation software and the map data is inserted.
8.1
Suitable files
The picture viewer supports JPG files and PNG files.
8.2
Opening the picture viewer
You can open the picture viewer only from the START window.
►
8.3
Tap on Pictures.
Selecting an image file
►
In the PICTURES window, tap on Folder.
The CURRENT FOLDER window opens. The name of the current folder is
indicated at the top. Files and sub-folders are listed underneath. They
are identified as follows:
Pictures
- 57 -
User’s Manual NAVIGON 21xx max
Picture File: Only files supported by the picture viewer are shown.
(Refer to "Suitable files" on page 57)
Folder: Sub-folders of the current folder are displayed.
►
Tap on a sub-folder in order to open it.
Note: If the sub-folder contains no suitable image files or sub-folders, it
cannot be opened.
►
Tap on
►
Tap on an image file in order to show it.
►
8.4
(Up one level) in order to open the next higher folder.
Tap on Cancel in order to close the CURRENT FOLDER window
without selecting a file.
Operating the picture viewer
Information area
The current image file and its file name are displayed in the information
area in the PICTURES window.
Controls
Full Screen: Shows the current picture as large as possible.
Next: Loads the next picture in the current folder.
Previous: Shows the previous picture in the current folder.
Slide Show: Shows all the pictures in the current folder one after the
other.
Exit: Closes the picture viewer.
8.5
Play-back mode
From the PICTURES window you can start two play-back modes.
Full Screen
►
- 58 -
Tap on
(Full Screen).
Pictures
User’s Manual NAVIGON 21xx max
The picture is scaled to its maximum size. You can use the
button (Next) and the
button (Previous) to switch to the other
pictures in the current folder.
►
Tap on the picture in order to close complete picture mode.
Slide Show
►
Tap on
(Slide Show).
Starting with the current picture, all the pictures in the current folder are
shown for several seconds one after the other. The pictures are scaled
to their maximum size. When all the pictures in the current folder have
been shown, the presentation continues from the beginning.
►
9
Tap on the middle of the picture in order to close the show again.
Configuring the NAVIGON 21xx max
The SETTINGS window is the starting point for customising the
NAVIGON 21xx max to match your personal preferences.
Settings can be accessed via the options in the START window and via
the options in many windows of the navigation application.
►
Tap on Options > Settings.
The SETTINGS window of the navigation application has several buttons:
Current Map, POI, Basic Settings and Route Profile.
►
Tap on a button to open the corresponding settings window.
The settings of the individual windows are distributed over several
screen pages. You can toggle between these pages with the
(To the Left) button and the
(To the Right) button.
Some settings can have only one of two values. These settings can be
(Toggle) button. All possible values are visible.
recognised by the
The currently valid value is highlighted in white.
►
Tap on
values.
(Toggle) in order to switch between the possible
Some settings can accept several different values. These settings can
be recognised by the
visible.
Configuring the NAVIGON 21xx max
(List) button. The currently valid value is
- 59 -
User’s Manual NAVIGON 21xx max
1. Tap on
(List).
A list with all possible values opens. The currently valid value is
marked.
2. Tap on the value you want. It is now marked.
3. Tap on OK.
The list closes. The new value is indicated.
For each setting there is a
(Help) button. When you tap on it you
will see an exact definition of the setting in question.
You can close the settings windows in two ways:
►
Tap on OK.
Any changes you have made will be adopted.
►
Tap on Cancel.
Any changes you have made will not be adopted.
- 60 -
Configuring the NAVIGON 21xx max
User’s Manual NAVIGON 21xx max
10
Appendix
10.1
Technical data
Dimensions
Weight
Operating
conditions
122 x 77 x 18.9 mm
approx. 178 g
Operating
temperature
Storage
temperature
Humidity
CPU
Operating system
Display
Memory
ROM
RAM
GPS
TMC
Device keys
I/O
Power supply
Rechargeable
battery
Charging
Car charger
cable
1
Appendix
Keyboard
Loudspeaker
1
Microphone
1
Headset
Memory card
USB
1
Bluetooth
Type
Running time
Electronic
Duration
Input
Output
-10°C to 60°C (14°F to 140°F)
-30°C to 70°C (-22°F to 158°F)
0% to 90%, non-precipitating
Samsung 400MHz S3C2443X
Microsoft Windows CE 5.0
4.3” LCD colour display with resistive
touch-panel
480 x 272 pixel (WQVGA)
Landscape format, transmissive
64 MB
64 MB
Yes (Nemerix NX³)
Built-in antenna
MMCX socket for external antenna
Yes
1 (On/Off)
Software keyboard
Yes
Yes
3.5 mm phone jack
SD / SDHC
USB 1.1
built-in (BT 2.0)
via USB socket
Li-Po/Li-Ion, 1200 mAh
Up to 3 hours
Integrated
approx. 4-5 hours
10-24V = (direct current, DC)
1.2A 5V = (direct current, DC)
Only NAVIGON 2150 max
- 61 -
User’s Manual NAVIGON 21xx max
10.2
Identification and serial number
The navigation system has various identification labels under the rear
cover. (e.g. CE label, serial number, ...)
If you need to see any of these labels, proceed as follows:
1. Switch off the navigation device.
2. Take the memory card out of the device.
3. With your thumbnail in the slot on the bottom of the device, pull the
rear cover off the device.
To close the rear cover again:
1. Place the cover correctly back in position.
2. Push the cover firmly against the device until it latches home in all
corners.
3. Re-insert the memory card.
Note: We recommend that you remove the rear cover only when told to
do so by our service staff.
10.3
Declaration of conformity
The NAVIGON 21xx max described in this manual bears the CE label
among others.
Products with the CE marking comply with Radio & Telecommunication
Terminal Equipment Directive (R&TTE) (1999/5/ECC), the
Electromagnetic Compatibility Directive (89/336/ECC) and the Low
Voltage Directive (73/23/ECC) – as amended by Directive 93/68/ECC –
issued by the European Community Commission.
Compliance with these directives implies conformity with the following
European Standards:
EN301489-1, EN301489-3, EN50332-2, EN55022, EN55024,
EN61000-3-2, EN61000-3-3, EN60950 / IEC 60950,
EN301357-2 V1.3.1
The manufacturer is not liable for modifications made by the user which
may alter the device's conformity with the CE label, nor for the
consequences thereof.
- 62 -
Appendix
User’s Manual NAVIGON 21xx max
11
Troubleshooting
In this chapter you will find solutions to problems which may arise
during use of the NAVIGON 21xx max.
This list does not claim to be complete. Answers to many other
questions can be found on the NAVIGON AG website. (See "Questions
about the product" on page 7)
I have connected a charger to the NAVIGON 21xx max. A connection to a
computer is shown on the display.
or
I have connected the NAVIGON 21xx max to a computer but it is not
detected as a removable disc.
The USB connector of the charger is not fully inserted in the case.
1. Unplug the connector.
The navigation device will carry out a new start. Wait for the
navigation software to be reloaded.
2. Without delay, insert the USB connector from the charger into the
corresponding socket of the NAVIGON 21xx max as far as it will
go. (See "Description of the NAVIGON 21xx max" on page 8)
The USB connector is not connected correctly. See above.
Note: Use only accessories which are recommended by NAVIGON
expressly for the NAVIGON 21xx max. NAVIGON AG accepts no
liability for errors or damages resulting from the use of other
accessories.
For suitable accessories go to www.navigon.com or your authorized
dealer.
Troubleshooting
- 63 -
User’s Manual NAVIGON 21xx max
12
Index
in a Town.................................. 27
Nationwide ............................... 26
Nearby...................................... 25
Save ............................................. 33
Start Navigation ............................ 31
Take Me Home ....................... 30, 33
Turn-by-Turn List .......................... 32
B
Block............................................ 43, 47
Bluetooth ........... see Handsfree Module
Bluetooth Function ............................ 55
C
Call
Dial a Number ............................... 51
Phone Book .................................. 52
Preset ........................................... 52
Recent Calls ................................. 52
Call in Progress
Enter numerals ............................. 53
Hang up ........................................ 53
Show Map ..................................... 53
Use handsfree .............................. 52
Use Mobile Phone ........................ 53
Compass ........................................... 17
Configuration ..................................... 59
Connection with Mobile Phone
Clear Connection Data ................. 56
Connection with Mobile Phone.... 50, 55
Contacts ............................................ 30
Conventions followed in this
manual .............................................. 6
Current Position
Save.............................................. 46
D
Data entry.......................................... 20
Destination
Address......................................... 24
Contacts........................................ 30
Direct Access................................ 28
Favourites ..................................... 29
From Map ..................................... 31
Home Address ........................ 30, 33
Input Sequence............................. 24
Last Destinations .......................... 29
My Destinations ............................ 23
New Destination............................ 23
POI................................................ 25
- 64 -
E
Emergency Services ................... 38, 46
Energy......................................... 12, 18
Entering data..................................... 20
F
Factory Settings ................................ 15
Favourites ................................... 29, 33
G
GPS
Faulty reception ............................ 21
Initialise......................................... 22
Signals.......................................... 14
Symbols ........................................ 17
GPS Status ....................................... 46
H
Handsfree Module
Bluetooth Function........................ 55
Call ............................................... 51
Call in Progress ............................ 53
Clear Connection Data ................. 56
Connection with Mobile
Phone................................... 50, 55
Dial a Number............................... 51
Enter numerals ............................. 53
Handsfree Settings ....................... 54
Hang up ........................................ 53
Incoming Call................................ 51
Open ............................................. 50
Phone Book .................................. 52
Preset ..................................... 52, 54
Index
User’s Manual NAVIGON 21xx max
Recent Calls ................................. 52
Settings ......................................... 53
Show Map ..................................... 53
Symbols ........................................ 18
Use handsfree .............................. 52
Use Mobile Phone ........................ 53
Volume.......................................... 50
Handsfree Settings............................ 54
Home Address............................. 30, 33
Hotline ................................................. 7
I
Input Sequence ................................. 24
Interim Destination ............................ 43
K
Keyboard ........................................... 19
L
Last Destinations......................... 29, 33
Logbook............................................. 49
M
Manual
Conventions .................................... 6
Symbols .......................................... 6
Map
Destination search ........................ 44
Navigation..................................... 41
Preview ......................................... 39
Reality View .................................. 43
Memory card ..................................... 13
Menu ................................................. 21
Muting................................................ 19
My Destinations................................. 23
N
Navigation
Block ....................................... 43, 47
Interim Destination........................ 43
Index
No GPS .................................. 32, 37
POI ............................................... 43
POI on Your Route ....................... 43
Route Profile........................... 32, 37
Skip Route Point........................... 43
Start ........................................ 31, 37
Turn-by-Turn List .................... 32, 37
Navigation Application
Exit................................................ 22
Start .............................................. 22
NAVIGON 21xx max
Description...................................... 8
Energy .......................................... 12
Installation .................................... 11
Memory card................................. 13
Scope of Delivery ........................... 7
Start .............................................. 14
TMC .............................................. 13
New Destination ................................ 23
O
Options.................................. 15, 21, 37
P
Password Lock.................................. 15
Phone................ see Handsfree Module
Phone Book....................................... 52
Picture Viewer ................................... 57
Pictures ............................................. 57
POI
Direct Access................................ 28
in a Town ...................................... 27
Nationwide.................................... 26
Nearby .......................................... 25
On route........................................ 43
Preset................................................ 54
Product Information........................... 15
R
Reality View ...................................... 43
Recalculate Route............................. 49
Recent Calls...................................... 52
Route Planning ................................. 33
- 65 -
User’s Manual NAVIGON 21xx max
Route points
Add ............................................... 34
Delete ........................................... 35
Order............................................. 35
Starting Point ................................ 34
Route Profile................................ 32, 37
Routes
Manage ......................................... 35
Planning........................................ 33
Route points.................................. 34
Route Profile ................................. 37
Save.............................................. 35
Show............................................. 36
Simulation ..................................... 36
Start Navigation ............................ 37
Starting Point ................................ 34
Turn-by-Turn List .......................... 37
S
Safety information ............................... 8
Scope of Delivery ................................ 7
Service ................................................ 7
Settings
Configuration ................................ 59
Volume.......................................... 42
Settings Handsfree Module
Bluetooth Function........................ 55
Clear Connection Data ................. 56
Connection with Mobile
Phone ......................................... 55
Handsfree Settings ....................... 54
Preset ........................................... 54
Volume.......................................... 50
Simulation
Exit ................................................ 36
Start .............................................. 36
Skip Route Point................................ 43
- 66 -
Software keyboard ............................ 19
Support................................................ 7
Symbols used in this manual .............. 6
T
Take Me Home............................ 30, 33
TMC
Recalculate Route ........................ 49
Show............................................. 48
Symbols ........................................ 17
Tuning Mode................................. 48
TMC Settings
Recalculate Route ........................ 49
TMC .............................................. 48
Traffic Information......................... 48
Tuning Mode................................. 48
Touchscreen Calibration ................... 15
Trade marks ........................................ 7
Traffic Information
Recalculate Route ........................ 49
Show............................................. 48
Tuning Mode................................. 48
Troubleshooting ................................ 63
Tuning Mode ..................................... 48
Turn-by-Turn List
Block............................................. 47
Show................................. 32, 37, 47
V
Volume ........................................ 42, 50
W
Warranty.............................................. 6
Index
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement