Navigon 7110 GPS Receiver User Manual
User's manual
NAVIGON 7100 | 7110
English (UK)
February 2008
This symbol showing a crossed-through refuse container signifies that,
within the European Union, the product must be disposed of as sorted
waste. This applies both to the product itself, as well as to all
accessories that carry this symbol. This product may not be disposed
of with unsorted household waste.
Imprint
NAVIGON AG
Schottmüllerstraße 20A
D-20251 Hamburg
The information contained herein may be changed at any time without prior
notification. This manual nor any parts thereof may not be reproduced for any
purpose whatsoever without the express written consent of NAVIGON AG, nor
transmitted in any form either electronically or mechanically, including photocopying
and recording. All technical specifications, drawings etc are subject to copyright law.
© 2008, NAVIGON AG
All rights reserved.
User's manual NAVIGON 7100 | 7110
Table of Contents
1
Introduction .......................................................................................6
1.1
About this manual.....................................................................................6
1.1.1
1.1.2
1.2
Legal notice ..............................................................................................6
1.2.1
1.2.2
1.3
2
Questions concering the product..............................................................7
2.1
Scope of Delivery .....................................................................................7
2.2
Description of the NAVIGON 7100 | 7110................................................8
2.3
Preparing NAVIGON 7100 | 7110 for use ................................................9
Navigation with GPS ..............................................................................11
2.5
Important safety information...................................................................11
Navigation safety information ....................................................11
Safety information for the navigation device..............................12
Safety guidelines when installing in your car.............................13
Operating the navigation software ................................................14
3.1
Volume ...................................................................................................14
3.2
Information .............................................................................................14
3.3
Software keyboard .................................................................................16
3.4
Lists ........................................................................................................16
3.5
Options ...................................................................................................17
3.6
Menus.....................................................................................................17
Password Lock................................................................................17
4.1
Activating password protection...............................................................17
4.2
Changing a password.............................................................................18
4.3
Cancelling password protection .............................................................18
4.4
Switching on NAVIGON 7100 | 7110 .....................................................18
4.4.1
5
Charging the rechargeable battery ..............................................9
Inserting a memory card..............................................................9
Preparing the navigation system for use ...................................10
2.4
2.5.1
2.5.2
2.5.3
4
Liability.........................................................................................6
Trademarks .................................................................................6
Before you begin...............................................................................7
2.3.1
2.3.2
2.3.3
3
Conventions.................................................................................6
Symbols .......................................................................................6
Forgotten your password?.........................................................18
Navigation .......................................................................................18
5.1
Starting NAVIGON 7100 | 7110 .............................................................19
User's manual
Table of Contents Š III
User's manual NAVIGON 7100 | 7110
5.1.1
5.2
5.2.1
5.2.2
5.2.3
5.2.4
5.2.5
5.3
7
Last Destinations .......................................................................25
Favourites ..................................................................................25
5.4
Navigating homewards...........................................................................26
5.5
Voice commands....................................................................................26
5.6
Determining destinations on the map.....................................................27
5.7
Starting navigation..................................................................................27
Managing Destinations...................................................................28
6.1
Saving a destination ...............................................................................29
6.2
Defining a destination as home address ................................................29
6.3
Setting up a voice command ..................................................................29
Routes with stages .........................................................................30
7.1
Route planning .......................................................................................30
7.1.1
7.1.2
7.1.3
7.2
7.3
Entering the starting point..........................................................30
Entering route points .................................................................31
Editing route points....................................................................31
Managing routes.....................................................................................32
7.2.1
7.2.2
Saving routes.............................................................................32
Loading routes ...........................................................................32
Navigation ..............................................................................................32
7.3.1
7.3.2
7.3.3
8
9
Specifying the destination country.............................................20
Destination address...................................................................21
Special destinations...................................................................22
Quick access to special destinations.........................................24
Information about the destination ..............................................24
Selecting a saved destination.................................................................25
5.3.1
5.3.2
6
Initialising the GPS receiver ......................................................19
Specifying a new destination..................................................................20
Calculating and displaying routes..............................................32
Simulating routes .......................................................................33
Starting navigation.....................................................................33
Options ............................................................................................34
Working with the map.....................................................................36
9.1
Maps.......................................................................................................36
9.2
Map in Preview mode.............................................................................36
9.3
Map in Navigation mode.........................................................................38
9.4
Reality View............................................................................................40
9.5
Map in Destination search mode............................................................41
9.5.1
IV Š Table of Contents
Operating in Destination search mode ......................................42
User's manual
User's manual NAVIGON 7100 | 7110
10
Useful functions..............................................................................43
10.1 GPS status, storing the current location.................................................43
10.2 Turn-by-Turn List....................................................................................43
10.2.1 Blocking route sections..............................................................44
10.2.2 Removing blocks and using original routes ...............................44
10.3 TMC (Traffic Information) .......................................................................45
10.3.1 Displaying traffic messages.......................................................45
10.3.2 TMC Settings .............................................................................45
10.4 Logbook..................................................................................................46
11
12
Configuring NAVIGON 7100 | 7110 ................................................47
Handsfree Module...........................................................................48
12.1 Opening and closing the hands-free module..........................................48
12.2 Bluetooth Manager .................................................................................48
12.3 Connecting to a telephone .....................................................................49
12.3.1 Pairing with a mobile phone ......................................................49
12.3.2 Connecting to a mobile phone...................................................50
12.4 Accepting a call ......................................................................................50
12.5 Calling ....................................................................................................51
12.5.1 Dialling a telephone number......................................................51
12.5.2 Calling most recently dialled, received or missed numbers.......51
12.5.3 Dialling on the mobile phone .....................................................52
12.6 During a call ...........................................................................................52
12.6.1
12.6.2
12.6.3
12.6.4
12.6.5
12.6.6
12.6.7
Adjusting the volume .................................................................53
Muting the microphone ..............................................................53
Transferring a call to the mobile phone .....................................53
Transferring a call from your mobile telephone .........................53
Entering numbers ......................................................................54
Bringing the navigation software to the foreground ...................54
Ending the call ...........................................................................54
12.7 Hands-free module troubleshooting .......................................................55
13
Appendix .........................................................................................56
13.1 Technical data ........................................................................................56
13.2 Declaration of Conformity.......................................................................57
14
Index ................................................................................................58
User's manual
Table of Contents Š V
User's manual NAVIGON 7100 | 7110
1
Introduction
1.1
About this manual
1.1.1
Conventions
For better legibility and clarification, the following styles are used in this
manual:
Bold and italics:
Registered names, company and product descriptions.
SMALL CAPITALS:
Window and dialogue box titles.
Bold:
Highlighting of important parts in the text.
Underlined:
Descriptions of buttons, input fields and other elements
on the user interface.
1.1.2
Symbols
The following symbols refer to specific passages of text:
Instructions and tips for operating the software
More detailed information and explanations
Warnings
1.2
Legal notice
1.2.1
Liability
The software and the manual are subject to change without notice.
NAVIGON AG is not liable for the accuracy of the information contained
in this manual or for damages resulting from the use of this manual.
We always appreciate any suggestions that will allow us to offer
improved performance of our products in the future, or information
regarding malfunction.
1.2.2
Trademarks
All brands and trademarks mentioned in this document are possibly
registered by third parties and are subject to the current legislation and
to the rights of their respective owners without reservation. All
mentioned names of products, societies, or brands may be registered
-6-
Introduction
User's manual NAVIGON 7100 | 7110
trademarks of their respective owners. Every right that is not explicitly
accorded is reserved.
The absence of the explicit labelling of registered trademarks used in
this manual does not imply that the brand is not subject to the rights of a
third party.
►
►
1.3
Windows and ActiveSync are trademarks of the Microsoft
Corporation.
NAVIGON is a registered trademark of NAVIGON AG.
Questions concering the product
You have a question concerning your product? Then visit our webseite
www.navigon.com and click on "Support". There you will find an area
with frequently asked questions (FAQ Center) along with details of how
to contact us by phone or e-mail.
2
Before you begin
2.1
Scope of Delivery
Please check that the contents of the delivery are complete. If the
contents are incomplete, please notify us within 14 days of
purchasing. The purchased product includes the following:
►
NAVIGON 7100 | 7110 navigation device
►
Car cradle
►
Car charger cable ( 12V-adapter for the vehicle's cigarette lighter)
►
Mains adapter
►
USB-cable
►
SD-card containing software and navigation maps
►
Manual
►
CD with manuals (PDF, including languages not printed)
►
Pouch
Before you begin
-7-
User's manual NAVIGON 7100 | 7110
2.2
-8-
Description of the NAVIGON 7100 | 7110
1
Touch screen
2
Microphone
3
Reset
4
Headset socket (also used to connect TMC-antenna)
5
LED
6
Mini-USB-socket for USB-cable / Mains adapter / Car
charger cable
7
Stylus
8
Show Map
9
On/Off/Standby
10
Slot for SD-memory card
11
Connection for external GPS-antenna
Before you begin
User's manual NAVIGON 7100 | 7110
2.3
Preparing NAVIGON 7100 | 7110 for use
2.3.1
Charging the rechargeable battery
It is possible that the rechargeable battery is not fully charged when you
remove it from the packaging. We recommend that you fully charge the
battery before using the device for the first time.
►
►
Press the mains socket adapter provided into the designated slot on
the mains adapter until it locks into place.
Connect the mains adapter to the navigation device and to a mains
socket.
The LED of the NAVIGON 7100 | 7110 lights orange during charging.
The LED lights green when the NAVIGON 7100 | 7110 is fully charged.
Note: It takes approx. 4-5 hours to charge the device when the battery
is flat.
A fully charged battery enables 4 hours of use.
2.3.2
Inserting a memory card
►
Insert the memory card provided into the device (see image). Press
the card into the device until it locks into place.
Removing the memory card
1. Switch the navigation device off by pressing the
(On/Off/Standby) switch for at least 6 seconds.
2. Press the memory card gently into the device until the lock
disengages.
Before you begin
-9-
User's manual NAVIGON 7100 | 7110
2.3.3
Preparing the navigation system for use
Caution! Please be sure to refer to the safety information in chapter
"Important safety information" on page 11.
Securing the cradle
1. Clean that part of the windscreen to which you would like to secure
the cradle. The windscreen must be dry and free of dirt and grease.
2. Using the suction cup, fix the cradle provided to the windscreen.
The cradle should be as level as possible.
3. Press the lever on the suction cup down.
Securing the navigation device to the cradle
The navigation device is secured to the cradle by means of a bayonet
fitting. This connection functions in a similar way to attaching a lens to a
camera or putting the lid on a pressure cooker.
1. Place the navigation device on the bayonet in such a way that the
lugs on the bayonet ring correspond exactly with the recesses on
the cradle. This is achieved by rotating it approx. 45° to the left.
2. Turn the navigation device clockwise until the bayonet fitting locks
into place.
3. Adjust the navigation device so that it can be seen easily.
Supplying power to the navigation device
Included in delivery of the NAVIGON 7100 | 7110 is a car charger cable
with which power can be supplied to the navigation device via the
vehicle's cigarette lighter.
The car charger cable is connected to the NAVIGON 7100 | 7110 via
the mini-USB-socket
- 10 -
on the bottom of the device.
Before you begin
User's manual NAVIGON 7100 | 7110
Caution! The car charger cable is to be connected to cigarette lighters
with an operating voltage of 12V only.
Connecting the TMC-antenna
The NAVIGON 7100 | 7110 has an integrated TMC-receiver. For
optimal reception, you should use the TMC-antenna provided.
1. Connect the TMC-antenna to the headset socket
bottom of the NAVIGON 7100 | 7110.
on the
2. Secure the antenna to the windscreen using the suction cups.
2.4
Navigation with GPS
GPS is based on a total of 24 satellites that circle the earth and, in
doing so, are constantly transmitting their position and time. The GPS
receiver receives this data and calculates its own geographical position
on the basis of the information transmitted by the various satellites.
For a sufficiently precise positioning it is necessary to obtain the data
from at least three satellites. With the data from 4 or more satellites the
altitude above sea level can also be ascertained. The determination has
an accuracy of about 3 yards.
Once the navigation device has determined your position, this position
can be used as a starting point for route calculation.
The map data on your navigation device includes the geographical
coordinates of all digitally recorded points of interest, streets and
places. This enables the device to calculate a route between a starting
point and a destination.
The calculation of the current position and its representation on the map
takes place once every second. So your current position is always
shown on the map.
2.5
Important safety information
In your own interest, please read the following notices and safety
information carefully before starting up your navigation system.
2.5.1
Navigation safety information
Use navigation system at your own risk.
Caution! To prevent accidents, do not operate the navigation system
while driving.
Before you begin
- 11 -
User's manual NAVIGON 7100 | 7110
Caution! Do not look at the display unless it is absolutely safe to do so!
Caution! Traffic regulations have priority over any instructions from the
navigation system.
Caution! Only follow the instructions of the navigation system when the
circumstances and the road traffic regulations allow you to do so! The
navigation system will guide you to your destination even if you deviate
from the calculated route.
Caution! Check that the cradle is secured and adjusted properly before
each journey.
Note: If you have not understood the spoken instructions, or you're not
sure about what to do next, you can refer briefly to the map or arrow
view of your navigation system.
2.5.2
Safety information for the navigation device
Caution! Protect the device from moisture. The device is neither
waterproof nor is it protected against splash water.
Caution! Unplug the navigation device's power supply when you park
the vehicle. The navigation device requires power in standby-modus,
and may drain the vehicle's battery.
Caution! Do not open the navigation device's casing under any
circumstances.
Caution! Do not expose the navigation device to extreme heat or cold.
This may damage the device or impair its function.
Caution! Use only the charger provided or one that has been approved
of by the manufacturer.
Connect the charger to a suitable power supply. The voltage
requirements can be found on the device case and/or the packaging.
Note: Ensure that there are no kinks in the cable and that it will not be
damaged by any sharp objects.
Note: To clean the navigation device, use a moist cloth only .
- 12 -
Before you begin
User's manual NAVIGON 7100 | 7110
Note: Do not unplug by pulling on the cable. Doing so could damage
the cable!
Note: If you want to transport the navigation device, use the cover
provided in order to protect the touchscreen from scratches.
Note: Create a backup of the data contained on the memory card
provided. This is very easy to do with the NAVIGON Fresh software
which can be downloaded free of charge from our website
www.navigon.com.
Note: The memory card must remain inserted in the device during
operation of the navigation system.
Note: Use SD- or MMC-memory cards only! Ensure that memory card
contacts are clean and undamaged.
2.5.3
Safety guidelines when installing in your car
Caution! Secure the cradle and the TMC-antenna in such a way that
the driver's visibility is not impaired.
Caution! Do not attach the cradle within the deployment zone of
airbags.
Caution! When installing the cradle, ensure that it does not represent a
risk in the event of an accident.
Caution! Do not run cables directly next to safety-relevant devices and
power supplies.
Caution! After installation, check all safety-relevant equipment in the
car.
Caution! The car charger cable is to be connected to cigarette lighters
with an operating voltage of 12V only.
Before you begin
- 13 -
User's manual NAVIGON 7100 | 7110
3
Operating the navigation software
3.1
Volume
The volume of the spoken driving instructions can be adjusted during
navigation.
You have started navigation. The map is open in Navigation or
Destination search mode.
1. Tap the
(Volume) button.
The volume bar opens. It contains three buttons for adjusting the
volume:
(Louder),
2. Tap the
(Quieter),
(Volume on/off).
(Volume) button again.
The volume bar closes.
3.2
Information
Symbols located at the top of the screen are used to display
information.
GPS
The GPS symbol can show the following GPS-reception status:
No GPS: The built-in GPS receiver is not operational. Contact customer
service if the problem persists.
No Signal: Data is being received from less than three satellites.
Position cannot be calculated.
GPS Ready: Data is being received from at least three satellites.
Position can be calculated.
For more detailed information regarding GPS status, please refer to
chapter "GPS status" on page 43.
Energy
The Energy symbol can display the following conditions of the built-in
battery:
- 14 -
Operating the navigation software
User's manual NAVIGON 7100 | 7110
The device is being supplied by an external power source. The battery
is being charged.
The device is being supplied by its internal battery. The battery charge
is sufficient.
The device is being supplied by its internal battery. The battery charge
is low.
Direction
The Direction symbol shows you in which direction you are currently
heading. It can show the following points of the compass: N, NE, E, SE,
S, SW, W and NW.
TMC (Traffic Information)
The NAVIGON 7100 | 7110 has an integrated TMC-receiver which
provides the navigation system with up to date traffic messaging. If
necessary, it can alter the route dynamically in order to avoid a traffic
jam for example.
Note: This function is only available if TMC traffic messages are being
transmitted in the country in which you are travelling. This is not the
case in all countries.
The TMC symbol can display the following TMC-reception status:
No Symbol: There is no TMC receiver connected, or the connected or
built-in TMC receiver is not operational.
Tuning: The TMC-receiver is operational, but cannot find a station that
is transmitting TMC signals.
TMC on Standby: Traffic messages can be received.
For details on TMC functionality, please refer to chapter "TMC (Traffic
Information)" on page 45.
Bluetooth
The NAVIGON 7100 | 7110 has an integrated Bluetooth hands-free
module. This enables you to use the device as a hands-free kit for a
mobile phone with Bluetooth capability.
The Bluetooth symbol can display the following states for the handsfree module:
No Bluetooth: Bluetooth is deactivated.
Operating the navigation software
- 15 -
User's manual NAVIGON 7100 | 7110
Connected: The NAVIGON 7100 | 7110 is connected to another
device.
Not connected: The NAVIGON 7100 | 7110 is not connected to
another device. Bluetooth is activated.
3.3
Software keyboard
A software keyboard appears on the screen when text entries are
necessary.
All entries can be made on the software keyboard using the fingertips.
Only capital letters can be entered.
When entering town or street names you need not enter any special
characters or umlauts. The navigation system fills in these characters
for you automatically. If, for example, you are searching for “Würzburg”,
then simply enter "WURZBURG". Special characters may be helpful
when naming saved destinations and itineraries, however.
Special keys
enters a space character.
deletes the character in front of the cursor.
opens the numeric keypad.
opens the letter keyboard.
opens the special character keyboard. As soon as
you have entered a special character, the letter keyboard reappears
automatically.
3.4
Lists
Often, lists appear from which you can select an entry. This is the case,
for example, when you enter a location.
As soon as you enter the first letter, the largest city in the country
specified which begins with this letter appears.
As soon as you enter the second letter, a list appears with all locations
that begin with the letters entered.
If you enter additional letters, the list adapts to your entries. It only
contains entries that begin with the text that has been entered or
contain the text in the name. The more letters you enter, the shorter the
list will become.
- 16 -
Operating the navigation software
User's manual NAVIGON 7100 | 7110
You can toggle the list by means of the
buttons.
(Up) and
(Down)
In order to accept an entry from the list, simply tap on it.
The list closes as soon as you have accepted an entry.
3.5
Options
Some windows offer options that lead to further functions.
A description of all available options can be found in chapter "Options"
on page 34.
3.6
Menus
Some buttons have menus which open when activated.
Tap on a menu button to execute its function.
If you would like to quit the options list without selecting a function, tap
on the button you used to open the menu.
4
Password Lock
By creating a password, you can protect your navigation system from
unauthoriised use.
Note: Password protection only comes into effect after the navigation
device has been switched off completely. To do this, press the
(On/Off/Standby) switch for at least 6 seconds.
4.1
Activating password protection
1. In the MAIN WINDOW, tap on Options > Settings > Options >
Password Lock.
The PASSWORD LOCK window opens.
2. Enter a new password in the New password field.
3. Enter this password in the Confirm new password field again.
4. Tap the Save password button.
Note: The password must contain precisely 4 digits.
Password Lock
- 17 -
User's manual NAVIGON 7100 | 7110
4.2
Changing a password
1. In the MAIN WINDOW, tap on Options > Settings > Options >
Password Lock.
The PASSWORD LOCK window opens.
2. Enter the password that is currently valid in the Old password field.
3. Enter a new password in the New password field.
4. Enter the new password in the Confirm new password field again.
5. Tap the Change password button.
Note: The new password must contain precisely 4 digits.
4.3
Cancelling password protection
The PASSWORD LOCK window is open.
1. Tap on Options > Deactivate password lock.
2. Enter the password that is currently valid in the Enter password
field.
3. Tap the Deactivate password lock button.
4.4
Switching on NAVIGON 7100 | 7110
1. Press the
(On/Off/Standby) switch for at least 6 seconds.
If password protection has been activated, the ENTER PASSWORD
window opens.
2. Enter the password.
3. Tap the Continue button.
4.4.1
Forgotten your password?
If you have forgotten your password, proceed as follows:
1. Tap the
(Info) button.
2. Follow the instructions on the screen.
5
Navigation
Use navigation system at your own risk.
Caution! Please be sure to refer to the safety information in chapter
"Important safety information" on page 11.
- 18 -
Navigation
User's manual NAVIGON 7100 | 7110
Impaired GPS reception
If GPS reception is impaired, navigation will be interrupted. The
navigation software remains active.
As soon as GPS reception is restored, the navigation system calculates
any change of position which has occurred in the meantime. Navigation
may simply be continued.
Arriving at your destination
When you have reached the specified destination, a message to this
effect will be displayed.
Only your current position (triangle in orange) will now be shown on the
map.
5.1
Starting NAVIGON 7100 | 7110
1. Switch your navigation device on.
Each time the navigation device has been switched off completely
(by pressing the
(On/Off/Standby) switch for at least 6 seconds)
the following message appears when the software is started again:
"Please note that the road traffic regulations are prior to the
instructions of the navigation system. Please do not operate the
device while driving."
2. After you have read and fully understood the text, tap the OK
button.
If you do not accept these instructions, then tap the Cancel button
in order to quit the navigation software.
The MAIN WINDOW will open. You can reach all of the navigation
software functions via the MAIN WINDOW.
5.1.1
Initialising the GPS receiver
Note: It can take up to 20 minutes to initialise the integrated GPS
receiver for the first time.
Each time you switch on the receiver after this, the GPS reception will
start within one minute.
If the navigation device has been switched off for more than a week, the
next initialisation can take up to 10 minutes.
As soon as the navigation device has been switched on, initialisation of
the GPS receiver will begin.
Navigation
- 19 -
User's manual NAVIGON 7100 | 7110
In the right-hand top corner of the display, you will see the GPS symbol.
As soon as data from at least 3 satellites is received, the symbol
changes to
GPS Ready.
Note: If the GPS symbol displays GPS Ready after considerably less
than 20 minutes, it is advisable to leave the receiver switched on for at
least a further 15 minutes so as to ensure reliable operation.
Caution! If you have connected the navigation device to the power
supply via the vehicle's cigarette lighter, remove the connector before
you leave the vehicle standing for a longer period of time.
As the GPS receiver requires a constant supply of power, it could drain
the vehicle´s battery.
Opening the Main Window
The MAIN WINDOW opens when the navigation software starts.
If another window is open, tap the
previous window will open.
Tap the
opens.
5.2
(Back) button. The
(Back) button repeatedly, until the MAIN WINDOW
Specifying a new destination
New destinations for the NAVIGON 7100 | 7110 are all destinations that
you have not yet navigated, or you have not yet stored.
You can enter an address here, select a special destination, or select a
destination from the quick search function.
When you enter a new destination for the first time, the COVERED
list opens.
COUNTRIES
Tap on the country in which your destination lies.
5.2.1
Specifying the destination country
Above the right-hand upper corner of the uppermost entry field of the
ADDRESS, POI IN A CITY, and POI OF NATIONAL SIGNIFICANCE windows,
is the Country button. It shows the country code of the country from
which navigation destinations can currently be entered.
If your destination is in a different country, then proceed as follows:
1. Tap the Country button.
The COVERED COUNTRIES list opens.
2. Tap on the country in which your destination lies.
- 20 -
Navigation
User's manual NAVIGON 7100 | 7110
The COVERED COUNTRIES list closes again.
The symbol will display the country code of the destination country.
Note: Only countries of which at least a part is represented on the
currently loaded map may be selected.
5.2.2
Destination address
1. In the MAIN WINDOW, tap on New Destination > Enter an Address.
The INPUT SEQUENCE menu opens when you enter addresses for
the USA or Canada (and the corresponding map has been
selected).
1a Select whether you would like to enter the street first and then the
location (Street First), or first the location and then the street (City
First).
Note: For the following instructions, it is assumed that you have
selected City First as the order for entering addresses.
The ADDRESS window opens.
2. Enter the name or the postal code of the destination location.
3. Enter the name of the destination street. You can also enter the
name of a well-known object, e.g. "Olympic stadium" or "Eiffel
tower".
4. Enter the house number. If you don't know the number of the
house, or you specified an object in the preceding step, then leave
the field empty.
If you don't know the house number, but know the name of a nearby
side street, then tap on the Cross Street field and enter the name of
this street. The navigation system will calculate a route to the
intersection of the streets you have specified.
Note: It is not necessary to enter all the address details.
If you specify the town only, the navigation system will calculate a route
to the town centre.
If you specify the town and street without specifying a house number or
side street, the navigation system will calculate a route to the centre of
the street specified.
5. Tap the Start Navigation button.
The map opens in Preview mode.
Navigation
- 21 -
User's manual NAVIGON 7100 | 7110
Note: For detailed information on how to start navigation, please refer
to chapter "Starting navigation" on page 27.
5.2.3
Special destinations
Special destinations, also called POIs (Points Of Interest) for short, are
useful addresses that are catalogued according to particular criteria.
Special destinations include ports, airports, restaurants, hotels, petrol
stations, public buildings, doctor's surgeries, hospitals, shopping
centres, etc.
Special destinations can be displayed on the map by means of a
symbol. In the MAIN WINDOW, tap on Options > Settings > POI to select
the categories to be displayed on the map.
Special destinations nearby
Special destinations nearby, are special destinations that are located
within a given radius of your current location. This means you can
always find the nearest petrol station for example, no matter where you
are.
Note: GPS-reception must be sufficient for determining position. You
can see if GPS-reception is sufficient by looking at the
(GPS
Ready) symbol. For more detailed information, please refer to chapter
"GPS status" on page 43.
Note: In quick access mode, there are three categories of special
destinations available from the current vicinity, which can be searched
for quickly and without additional entry. For more detailed information,
please refer to chapter "Quick access to special destinations" on
page 24.
1. In the MAIN WINDOW, tap on New Destination > Search for POI >
Nearby.
The POI NEARBY window opens.
2. Specify a category from which you would like to select a special
destination.
If sub-categories exist for the category you have selected, the Sub
Category list will open.
3. Specify a sub-category from which you would like to select a special
destination.
The Name of the Destination list opens. It contains the nearest
special destinations in the specified category, sorted by distance.
4. Tap on the name of the destination.
- 22 -
Navigation
User's manual NAVIGON 7100 | 7110
5. Tap the Start Navigation button.
The map opens in Preview mode.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 27.
Special destinations of nationwide significance
Special destinations of nationwide significance are airports, places of
interest, national monuments, large ports etc. This enables you to find
places of interest, for example, without having to know the name of the
location.
1. In the MAIN WINDOW, tap on New Destination > Search for POI >
Nationwide.
The POI OF NATIONAL SIGNIFICANCE window opens.
2. Specify a category from which you would like to select a special
destination.
The Name of the Destination list opens. It contains the nearest
special destinations in the specified category, sorted by distance.
3. Tap on the name of the destination.
4. Tap the Start Navigation button.
The map opens in Preview mode.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 27.
Special destinations in a given location
Special destinations in a given location can be useful when navigating
in an unfamiliar town.
1. In the MAIN WINDOW, tap on New Destination > Search for POI > in
a City.
The POI IN A CITY window opens.
2. Enter the name or the postal code of the destination location.
3. Specify a category from which you would like to select a special
destination.
If sub-categories exist for the category you have selected, the Sub
Category list will open.
4. Specify a sub-category from which you would like to select a special
destination.
The Name of the Destination list opens. It contains special
destinations from the specified category, sorted alphabetically.
Navigation
- 23 -
User's manual NAVIGON 7100 | 7110
5. Tap on the name of the destination.
6. Tap the Start Navigation button.
The map opens in Preview mode.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 27.
5.2.4
Quick access to special destinations
The quick access system contains three categories of special
destinations. Destinations in your vicinity that correspond to these
categories can be listed quickly, without the need for additional entry.
►
In the MAIN WINDOW, tap on Options > Settings > POI to select the
categories available in the quick access system.
Note: GPS-reception must be sufficient for determining position. You
(GPS
can see if GPS-reception is sufficient by looking at the
Ready) symbol. For more detailed information, please refer to chapter
"GPS status" on page 43.
1. In the MAIN WINDOW, tap the New Destination button.
The NEW DESTINATION menu opens.
The symbols of the categories which have been selected for quick
access can be seen in the menu at the bottom.
2. Tap on a category from which you would like to select a special
destination.
The Name of the Destination list opens. It contains the nearest
special destinations in the specified category, sorted by distance.
3. Tap on the name of the destination.
The map opens in Preview mode.
For information on how to start navigation, please refer to chapter
"Starting navigation" on page 27.
5.2.5
Information about the destination
For many destinations that you specify, there will be further information
available, stored in the navigation system's database.
For example, for many restaurants there is a telephone number
available. You can then call the restaurant in order to reserve a table,
for example.
One of the destination entry windows described is open.
- 24 -
Navigation
User's manual NAVIGON 7100 | 7110
►
Tap the
(Destination Info) button.
The DESTINATION INFO window opens. It contains all the information
about the specified destination that is stored in the navigation system's
database.
►
►
►
Tap the Close button to close the DESTINATION INFO window.
Tap the
map.
(Show on Map) button to show the destination on the
Tap the
(Call) button to call the number entered.
Note: The Call function is only available when the
NAVIGON 7100 | 7110 is connected via Bluetooth to a mobile phone.
For detailed information about connecting to a mobile phone, please
refer to chapter "Handsfree Module" on page 48.
5.3
Selecting a saved destination
The following lists of destinations and addresses are available for
selection in NAVIGON 7100 | 7110 under My Destinations.
►
►
5.3.1
LAST DESTINATIONS: destinations that you have previously
navigated to.
FAVOURITES: all destinations that you have stored in
NAVIGON 7100 | 7110.
Last Destinations
NAVIGON 7100 | 7110 saves the last 30 destinations to which you
have navigated in the LAST DESTINATIONS list.
1. In the MAIN WINDOW, tap on My Destinations > Last Destinations.
2. Tap the destination to which you would like to navigate.
3. Tap the Start Navigation button.
The map opens in Preview mode.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 27.
5.3.2
Favourites
Destinations to which you often travel can be saved in the FAVOURITES
list.
In the FAVOURITES list, up to 300 destinations can be saved.
Navigation
- 25 -
User's manual NAVIGON 7100 | 7110
Information on how to store a destination can be found in chapter
"Saving a destination" on page 29.
1. In the MAIN WINDOW, tap on My Destinations > Favourites.
2. Tap the destination to which you would like to navigate.
3. Tap the Start Navigation button.
The map opens in Preview mode.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 27.
5.4
Navigating homewards
In NAVIGON 7100 | 7110 you can save your address as home address.
You can navigate to your home address at anytime by activating a
single button.
The first time you tap the Take Me Home button, you will be requested
to enter your address.
Further information about entering your home address can be found in
chapter "Defining a destination as home address" on page 29.
►
In the MAIN WINDOW, tap the Take Me Home button.
If you have not yet entered your home address, a dialog window will
notify you of this.
Navigation starts. The route profile used for the previous navigation
applies.
5.5
Voice commands
You can designate voice commands to destinations in the FAVOURITES
list so that you can start navigation to these destinations "on command".
The route profile used for the previous navigation applies.
You can set up a voice command when you save the destination or at a
subsequent time.
For information on setting up a voice command, please refer to chapter
"Setting up a voice command" on page 29.
1. In the MAIN WINDOW, tap the Voice Command button.
2. On prompting, repeat the voice command that you have stored for
the desired destination into the NAVIGON 7100 | 7110.
A dialog window shows the name of the destination.
- 26 -
Navigation
User's manual NAVIGON 7100 | 7110
3. Tap the Start Navigation button.
The map opens in Preview mode.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 27.
5.6
Determining destinations on the map
You may indicate a destination directly on the map. In addition to towns
and streets, you may also select special destinations quickly.
1. In the MAIN WINDOW, tap on Options > Show Map.
2. Tap the
(Destination search) button.
The map opens in Destination search mode.
3. Tap on the point to which you wish to navigate.
Note: Please refer to chapter "Map in Destination search mode" on
page 41 for information about how to change the map view so that your
destination can easily be seen on it.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
4. Tap the
(OK) button.
The DESTINATION ON MAP window opens. The detailed address data
of the selected destination is displayed in the left-hand upper
corner.
5. Tap the Take Me There button.
The map opens in Preview mode.
For detailed information on how to start navigation, please refer to
chapter "Starting navigation" on page 27.
5.7
Starting navigation
The map is open in Preview mode.
The navigation destination is depicted by a small flag. The route and the
estimated trip time are displayed.
Navigation
- 27 -
User's manual NAVIGON 7100 | 7110
Route Profile
A so called route profile forms the basis of the route calculation.
Tap the Route Profile button if you want to view or change the route
profile.
Note: If you change the route options, these remain valid for
subsequent navigation.
Information about how to change individual route profile settings can be
obtained by tapping on the corresponding
(Help) button.
Turn-by-Turn List
If you would like to see detailed directions for the route, tap on Options
> Show Turn-by-Turn List.
For detailed information about the functions in the TURN-BY-TURN LIST
window, please refer to chapter "Turn-by-Turn List" on page 43.
Starting navigation
►
Tap the Start Navigation button or simply start driving.
No GPS reception
If the received GPS signal is insufficient, the following message will
appear: "GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
►
►
Wait until GPS reception is sufficient for determining position, the
route will be recalculated and you can begin navigation.
Tap the Cancel button. The MAIN WINDOW opens. Your destination
is saved in the LAST DESTINATIONS list.
Tap the Demo button. The route will be calculated using the centre
of the specified location as starting point. Subsequently, navigation
of the route will be simulated.
Tap
6
(Back) to end the demonstration.
Managing Destinations
Every destination that you enter, and the destinations from the LAST
DESTINATIONS list may be saved to the FAVOURITES list. This makes
sense if you frequently navigate to a particular destination.
- 28 -
Managing Destinations
User's manual NAVIGON 7100 | 7110
6.1
Saving a destination
1. Enter a destination as described in "Specifying a new destination"
on page 20. Do not tap the Start Navigation button!.
2. Tap on Options > Save Destination.
- OR –
1. Select a destination from the LAST DESTINATIONS list as described in
chapter "Last Destinations" on page 25. Do not tap the Start
Navigation button!
2. Tap on Options > Save as Favourite.
3. Enter a name for the destination.
4. If you want to define the destination as your home address, tap on
the
black.
(Toggle) button so that the value Yes is highlighted in
5. Tap the Save button.
6.2
Defining a destination as home address
Only one destination from the FAVOURITES list can be defined as your
home address.
You can then begin navigation to this destination very quickly by
tapping the Take Me Home button in the MAIN WINDOW.
1. Select the destination which you want to define as your home
address from the FAVOURITES list. (See chapter "Favourites" on
page 25)
2. Tap on Options > Home Address.
The selected destination has now been saved as your home address.
Your home address now appears in the FAVOURITES list marked by a
house symbol.
6.3
Setting up a voice command
1. Select the destination from the FAVOURITES list for which you would
like to set up a voice command. (see chapter "Favourites" on
page 25)
2. Tap on Options > Store a Voice Command.
You will be prompted by a dialog window to repeat the voice
command into the NAVIGON 7100 | 7110 for the selected
destination.
3. Repeat the command for the selected destination into the
NAVIGON 7100 | 7110.
Managing Destinations
- 29 -
User's manual NAVIGON 7100 | 7110
The dialog window closes. The destination will now appear in the
FAVOURITES list marked by a symbol.
7
Routes with stages
It is possible to plan routes without GPS-reception, in the comfort of
your home for example. Planned routes can be saved for later use, this
allows you to plan as many routes as you like e.g. for your holidays.
7.1
Route planning
1. In the MAIN WINDOW, tap the Options button.
The options list opens.
2. Tap the Route Planning option.
The ROUTE PLANNING window opens.
7.1.1
Entering the starting point
The starting point of a route, is the point at which you want to begin
your trip. This need not necessarily be the current location. If you are at
home planning a route for your holidays, you could, for example, enter
your hotel as the starting point.
The starting point is only important if you want to see a planned route
on the map, but currently have no GPS reception, or you are not
currently at the planned starting point. The starting point that you enter
therefore has the flow number "0".
As soon as you begin navigation, your current location will be used as
the starting point for the route calculation.
The first stage is therefore the trip to the route point with the flow
number "1".
1. Tap on the Specify Starting Point field.
The STARTING POINT menu opens.
If you want to enter your current location as the starting point:
2. Tap on the Current Position menu item.
If you want to enter a different starting point:
2. Tap the corresponding button.
3. Enter the starting point. (See the corresponding section of chapter
"Navigation" on page 18 ff.)
4. Tap the Set Starting Point button.
The selected starting point will now be displayed next to the
0°(Starting Point) button.
- 30 -
Routes with stages
User's manual NAVIGON 7100 | 7110
Changing the starting point
►
Tap the Specify Starting Point field.
The STARTING POINT menu opens. You can now enter a different
starting point. Proceed as described above.
7.1.2
Entering route points
Route points are destinations on the route that you want to navigate to.
The flow number for each route point can be found on a button in front
of it.
1. Tap the Add Route Point field.
The ROUTE POINT menu opens.
2. Tap on the button for the desired destination entry type.
3. Enter the route point. (See the corresponding section of chapter
"Navigation" on page 18 ff.).
4. Tap the Add button.
The selected route point will now be shown next to its flow number.
Repeat these steps for each additional destination that you want to add
to your route.
7.1.3
Editing route points
Route points can be deleted from a route. The order of the route points
can be varied as you wish.
Note: The start point (flow number "0") can neither be moved nor
deleted.
►
Tap on the route point that you want to edit.
The context menu contains the following buttons:
Route Point Up: Moves the selected route stage forwards.
(Example: route point 2 becomes route point 1).
Route Point Down: Moves the selected route point backwards.
(Example: route point 2 becomes route point 3).
Delete: Deletes the selected route point. A dialog window prompts
you to confirm deletion.
Routes with stages
- 31 -
User's manual NAVIGON 7100 | 7110
7.2
Managing routes
You can save each planned route under a particular name.
Note: Only the start point and route points will be saved, not, however,
the calculated route. If you load a route that has been saved, it must be
recalculated before navigation can begin.
You can load, rename or delete stored routes.
7.2.1
Saving routes
The ROUTE PLANNING window is open. You have entered the starting
point and at least one route point.
1. Tap on Options > Save Route.
2. Enter a name for the route.
3. Tap the Save button.
The destination is now saved to the SAVED ROUTES list. The dialog
window closes.
7.2.2
Loading routes
1. Tap on Options > Saved Routes.
2. Tap the route that you want to load.
3. Tap the Load Route button.
The ROUTE PLANNING window opens. The starting point and the
route points of the loaded route have been entered.
7.3
Navigation
The route must be calculated first. You may then begin navigation or
just simulate it.
7.3.1
Calculating and displaying routes
It is possible to calculate and display a planned route on the map even
without GPS reception in order to get an impression of the journey.
The ROUTE PLANNING window is open. The starting point and at least
one route point have been entered.
1. Tap the Show Route button.
The map window opens in Preview mode.
The starting point and the route points are marked by flags. For
each stage, the distance and the estimated trip time is given. This
data is also displayed for the entire route.
- 32 -
Routes with stages
User's manual NAVIGON 7100 | 7110
7.3.2
Simulating routes
It is also possible to simulate navigation.
Note: The reception of GPS-signals is not necessary for simulation.
Simulation is restricted to routes of 60 mi max.
You have calculated and displayed a route.
►
Tap on Options > Simulation.
The route will be recalculated for simulation purposes. Simulation
starts when calculation has finished.
Ending simulation
You may end simulation at any time.
►
Tap the
(Back) button.
A dialog window will prompt you to confirm your decision to cancel
navigation.
The MAIN WINDOW will then open.
7.3.3
Starting navigation
You have calculated and displayed a route.
Route Profile
The calculation of a route is based on so called route options.
If you want to view or change these options, tap the Route Profile
button.
Note: If you change the route options, these remain valid for
subsequent navigation.
You can get information regarding changing individual route profiles by
tapping the corresponding
(Help) button.
Turn-by-Turn List
If you would like to see detailed directions for the route, tap on Options
> Show Turn-by-Turn List.
For detailed information about the functions in the TURN-BY-TURN LIST
window, please refer to chapter "Turn-by-Turn List" on page 43.
Routes with stages
- 33 -
User's manual NAVIGON 7100 | 7110
Starting navigation
►
Tap the Start Navigation button or simply start driving.
No GPS reception
If the received GPS signal is insufficient, the following message will
appear:
"GPS reception is currently not sufficient. Navigation starts
automatically as soon as GPS reception is OK again."
You have the following options:
►
►
8
Wait until GPS reception is sufficient for determining position, the
route will be recalculated and you can begin navigation.
Tap the Cancel button. The MAIN WINDOW opens. The destination is
saved to the LAST DESTINATIONS list.
Options
Some windows offer options that lead to further functions.
►
Tap the Options button to open the options list.
►
Tap the option you would like to execute.
►
If you would like to quit the options list without selecting an option,
tap the Options button again.
Delete All: Deletes all destinations from the LAST DESTINATIONS list. The list is
then empty. A dialog window prompts you to confirm deletion.
Save as Favourite: Saves the specified destination to the FAVOURITES list.
For more detailed information, please refer to chapter "Saving a
destination" on page 29.
Show on Map: Shows the specified address on the map.
Settings: Opens the SETTINGS window. Here you can configure the navigation
system.
For more detailed information, please refer to chapter "Configuring
NAVIGON 7100 | 7110" on page 46.
Logbook: Opens the .LOGBOOK window. Here you can begin and end logbook
recording.
For detailed information, please refer to chapter "Logbook" on page 46.
Saved Routes: Opens a dialog window in which you can load a stored route.
GPS status: Opens the GPS STATUS window. Here you can see details
regarding GPS reception. You can also save data regarding the current
location.
- 34 -
Options
User's manual NAVIGON 7100 | 7110
For more detailed information, please refer to chapter "GPS status" on
page 43.
Home Address: Saves the selected destination as your home address. You can
then begin navigation to this destination very quickly by tapping the
Take Me Home button in the MAIN WINDOW.
Touchscreen Calibration: Opens a window in which you can recalibrate the
touchscreen (realign) should it react imprecisely to touch.
Show Map: Opens the map in Destination search mode. Here you can
determine your navigation destination directly on the map.
For more detailed information, please refer to chapter "Determining
destinations on the map" on page 27.
Delete: Deletes the selected destination from the FAVOURITES list or the
selected route from the SAVED ROUTES list. A dialog window prompts
you to confirm deletion.
New Route: Deletes the starting point and all route points from the ROUTE
PLANNING window, so that you can plan a new route.
If necessary, save the previously planned route!
Product Information: Opens a window in which you can obtain information
regarding the installed software. You can also see the navigation
system's clock.
Save Route: Opens a window in which you can save the planned route under a
specific name.
For more detailed information, please refer to chapter "Saving routes"
on page 32.
Route Planning: Opens the ROUTE PLANNING window. Here you can plan
routes, manage planned routes and start navigation to a planned route.
For more detailed information, please refer to chapter "Routes with
stages" on page 30.
Route Profile: Opens the ROUTE PROFILE window. Here you can view the
options for route planning and, if necessary, change them.
Simulation: Simulates a navigation based on the displayed route. This
simulation can be performed without GPS reception. Simulation is,
however, restricted to routes of max 60 mi.
Store a Voice Command: Prompts you to designate a voice command for the
selected destination so that you can start navigation to this destination
"on command".
For more detailed information, please refer to chapter "Setting up a
voice command" on page 29.
Options
- 35 -
User's manual NAVIGON 7100 | 7110
Rename: Opens a window in which you can change the name for the selected
destination or route.
Traffic: Opens the TRAFFIC INFORMATION window in which pending reports are
listed. For detailed information, please refer to chapter "TMC (Traffic
Information)" on page 45.
Show Turn-by-Turn List: Shows detailed directions for the route, including all
points at which you must turn.
For more detailed information, please refer to chapter "Turn-by-Turn
List" on page 43.
Factory Settings: Opens a window in which you can reset all settings to the
original factory settings.
Delete Destination: Deletes the highlighted destination from the list (LAST
DESTINATIONS or FAVOURITES). A dialog window prompts you to confirm
deletion.
Save Destination: Saves the specified address in the FAVOURITES list.
For more detailed information, please refer to chapter "Saving a
destination" on page 29.
Add to Route: Opens route planning. The address specified will be added as the
first route point of a new route.
For more detailed information, please refer to chapter "Routes with
stages" on page 30.
9
Working with the map
9.1
Maps
Even if you have stored several navigation maps on the navigation
system's memory card, NAVIGON 7100 | 7110 can only operate with
one map at a time.
Tap on Options > Settings > Current Map to see which map is currently
being used. You can also select another map here.
9.2
Map in Preview mode
You have entered a destination and tapped the Start Navigation button.
- OR –
You have planned or loaded a route and tapped the Show Route
button.
The map opens in Preview mode. The entire route is visible.
- 36 -
Working with the map
User's manual NAVIGON 7100 | 7110
1
2
The route is highlighted in orange.
A triangle in orange shows your current position.
If you display a planned or loaded route and the specified starting point
is not the same as your current location, then the current position may
or may not be shown on the preview.
3
The destination is marked with a little flag.
When you have planned or loaded a route and displayed it, the starting
point and each route point will be marked with a little flag.
4
You will see the total distance for the route in a small info box, together
with the estimated trip time and the estimated time of arrival.
This information can be displayed or hidden by tapping on Options >
Settings > Basic Settings.
If you display a route with several stages, you will see this information
for each stage.
►
►
Tap the Route Profile button to view or change the settings on
which the route calculation is based.
Tap the Start Navigation button to begin the journey.
When you display a planned or loaded route, the route may be
recalculated. Starting point for the calculation is your current
location. You will now be guided to the first route point entered.
►
►
Tap on Options > Show Turn-by-Turn List to view detailed
directions for the route. (See "Turn-by-Turn List" on page 43)
Tap the
(Destination search) button to view the map in
Destination search mode. (See "Map in Destination search mode"
on page 41).
Working with the map
- 37 -
User's manual NAVIGON 7100 | 7110
9.3
Map in Navigation mode
After the route has been viewed in Preview mode, navigation will start.
The map opens in Navigation mode.
1
Signposting to be followed is displayed here.
2
Effective speed limits are displayed here (where available).
3
The route is marked by the colour orange.
4
When two manoeuvres need to be executed in quick succession, the
small arrow field indicates the second manoeuvre to be executed.
5
The large arrow field shows a schematic depiction of the next junction
which you should turn on to. The remaining distance to this junction is
diplayed beneath.
As you get closer to the junction, you will see a spot diagram instead of
the distance.
The nearer you get to the junction, the more yellow spots are displayed.
If you don't have to change direction for a longer period, you will see
only a forward-facing arrow. The distance for which you are to follow the
road you are on is displayed beneath the arrow.
►
Tap the large arrow field to hear current route instructions.
6
The traffic lanes to be followed to your destination are depicted in the
colour orange.
7
The height above sea level and the current speed are displayed here.
- 38 -
Working with the map
User's manual NAVIGON 7100 | 7110
8
The remaining distance to the destination, the estimated duration of the
trip, and the estimated time of arrival can be seen in the Total field.
9
A triangle in orange shows your current position on the map. The map
sector displayed changes continually so that your current position is
always more or less centred on the map.
10
If you are navigating a route with several stages, you will see the
remaining distance, estimated duration of the trip, and the estimated
time of arrival for the next interim destination in the Next field.
11
The name of the next stretch of road that you must travel on is
displayed in the upper street field.
12
The name of the street you are currently travelling on is displayed in the
lower street field.
Note: The displays for many of the above mentioned fields can be
configured via Options > Settings > Basic Settings. Some displays only
function if the corresponding information is available on the map.
Note: If you tap on the large arrow field, the current route instruction will
be repeated.
►
►
Tap on Options > Show Turn-by-Turn List to view detailed
directions for the route. (See "Turn-by-Turn List" on page 43)
Tap the
(Destination search) button to view the map in
Destination search mode. (See "Map in Destination search mode"
on page 41).
Quitting navigation
Tap the
(Back) button to quit navigation. A dialog window
prompts you to confirm.
Map functions in Navigation mode
When the map is open in Navigation mode, tap any point on the map.
Buttons with various functions will be displayed.
2D/3D: Changes between 2D and 3D mode. The symbol for the mode that is
currently set is marked orange.
Day/Night: Changes between "day" and "night" display modes. The symbol for
the mode that is currently set is marked orange.
Interim Destination: Opens a menu for entering an interim destination.
Working with the map
- 39 -
User's manual NAVIGON 7100 | 7110
The navigation system will first guide you to this interim destination.
Afterwards, you may simply continue navigation to your original
destination.
Skip Route Point: Tap this button to omit the next route point. This button is
inactive when less than 2 route points are pending.
Block: Tap this button in order to block a section of the route that lies in front of
you, i.e. to recalculate the route in order to avoid this section of the
route, e.g. if you have heard of a traffic jam relating to this section on
the radio.
Tap this button again to remove the block.
POI on Your Route: Tap this button to display special destinations on your
route. This enables you to find out, for example, how far it is to the
nearest services. A destination shown here can be added as an interim
destination by tapping the
of its entry in the list.
9.4
(Interim Destination) button to the right
Reality View
When, during navigation, you approach a motorway junction, the map
will change to Reality View mode.
The Reality View mode shows very clearly, the signposting and lanes
you must follow.
This display remains unchanged until you have passed the motorway
junction. The map will then change back to Navigation mode.
►
- 40 -
If you want to change to Navigation mode before you have passed
the junction, just tap any point on the map.
Working with the map
User's manual NAVIGON 7100 | 7110
Note: Reality View mode is not available for every motorway junction.
Availability is dependent on the map data in use.
9.5
Map in Destination search mode
The map is always in Destination search mode when a pair of cross
hairs can be seen.
When you are driving, the map's orientation does not change. It is
always oriented with north at the top.
Zoom Out: The map section shown becomes larger, but you will see
fewer details.
Zoom In: The map section becomes smaller, but you will see more
details.
Zoom Mode: When this button is active, you can plot a map section with
the pen or with your finger.
Plot the map section from upper left to bottom right and it will then zoom
to fit the size of the screen.
Plot the map section from bottom right to top left, and the map will zoom
out.
Pan Mode: When this button is active, you can move the map section
with the pen or with your finger. Simply push the map in the desired
direction.
Working with the map
- 41 -
User's manual NAVIGON 7100 | 7110
Entire Route: Zooms the map so that the entire route is visible.
Current Position: Selects the map section shown so that the current
location is centred.
9.5.1
Operating in Destination search mode
1. Tap on the point to which you wish to navigate.
The destination that you have selected appears under the cross
hairs.
The geographical coordinates of the destination and the
corresponding address are shown in the bottom third of the screen.
2. Tap the
(OK) buttton.
Buttons with various functions will appear.
Take Me There: Begins navigation to the selected point. If you are currently
navigating, navigation will be aborted.
Interim Destination: Sets the selected point as an interim destination. The
navigation system will first guide you to this interim destination.
Afterwards, you may simply continue navigation to your original
destination.
This function is only active during navigation.
Set as Destination: Adds the selected point as the last point in the route plan. If
no route plan was open, the selected point will become the first point in
a new route plan.
Save: Opens the SAVE DESTINATION AS... window. You can enter a name
under which the selected point will be stored in the FAVOURITES list.
For more detailed information, please refer to chapter "Saving a
destination" on page 29.
Search Nearby: Opens the POI NEARBY window. Here you can search for
destinations near the specified point. (See "Special destinations nearby"
on page 22)
►
- 42 -
Tap the
(Destination search) button to quit the
Destination search mode. You will be returned to the window from
which you started this mode.
Working with the map
User's manual NAVIGON 7100 | 7110
►
Tap the
(Back) button to return to the MAIN WINDOW. If
you are currently navigating, you will be prompted to confirm your
decision to quit navigation.
10
Useful functions
10.1
GPS status, storing the current location
In the GPS STATUS window, you will find an overview of the data the
navigation system calculates from the received GPS signals.
GPS status is available via the options of several windows.
1. Tap on Options > GPS status.
The current location can be stored in the FAVOURITES list.
2. Tap the Save Position button.
The SAVE DESTINATION AS... dialog window opens. The cursor
blinks in the Name field.
3. Enter a name for the destination.
4. Specify whether your current position should be stored as the home
address.
5. Tap the Save button.
10.2
Turn-by-Turn List
You can display detailed directions of the calculated route before
starting navigation or at any time during navigation. This list displays all
of the driving instructions in table form.
The map is open in Preview mode, Navigation mode or Reality View
mode.
►
Tap on Options > Show Turn-by-Turn List.
The TURN-BY-TURN LIST window opens.
Useful functions
- 43 -
User's manual NAVIGON 7100 | 7110
1
Schematic depiction of the next junction where you must turn.
2
Distance to this junction.
3
Name of the street onto which you must turn.
4
Indicates whether you want to travel on the relevant route section or
not.
(Allow): The relevant section may be included on the route.
(Forbid): The relevant section may not be included on the route.
10.2.1
Blocking route sections
1. Tap on the route sections that you do not want to travel on, so that
the
2. Tap the
(Forbid) symbol appears next to them.
(Modify Route) button.
The navigation system calculates an alternative route avoiding the
route sections selected. The new driving instructions are displayed
in the TURN-BY-TURN LIST window.
3. Tap the
window.
10.2.2
(Back) button to close the TURN-BY-TURN LIST
Removing blocks and using original routes
Section blocks can be removed at anytime.
►
- 44 -
In the TURN-BY-TURN LIST window, tap on Options > Calculate
original route.
Useful functions
User's manual NAVIGON 7100 | 7110
10.3
TMC (Traffic Information)
The integrated TMC receiver enables the navigation system to make
use of current traffic messaging. If necessary, it can change your route
dynamically in order to avoid a traffic jam, for example.
10.3.1
Displaying traffic messages
The traffic reports that are currently valid are available via the options of
several windows.
1. Tap on Options > Traffic.
The TRAFFIC INFORMATION window opens.
Above the list, the Traffic information button shows the type of traffic
messaging listed and how many messages of this type are listed.
2. Tap the Traffic information button to select the messages to be
displayed.
For each traffic message in the list, information about the location and
type of traffic obstruction will be displayed.
►
Tap a message to display detailed information.
) or Ignore (
) obstructions
The navigation system can Avoid (
on the route. The Avoid / Ignore button shows the corresponding status.
►
►
10.3.2
Tap the button to select the alternative setting.
Tap the
window.
(Back) button to close the TRAFFIC INFORMATION
TMC Settings
►
In the TRAFFIC INFORMATION window, tap on Options > TMC
Settings.
In the TMC SETTINGS window, you can set and configure the TMCsender, this will determine the effect a received traffic message
concerning your route will have on consequent routing.
Tuning Mode
Tap the Tuning Mode button to determine the settings for the station
you have chosen to receive traffic information.
►
►
Useful functions
Automatically: Use the arrow buttons in the station section to tune
into another station. The system will search for another station if
reception becomes poor.
Hold station: Use the arrow buttons in the station section to tune
into another station. The system will search for the same station on
a different frequency if the signal becomes poor.
- 45 -
User's manual NAVIGON 7100 | 7110
►
Hold frequency: Use the arrow buttons in the station section to tune
into another frequency. The system will not search for another
station if reception becomes poor.
Recalculate Route
Tap on Recalculate Route to determine the effect new messages
concerning your route have on route calculation.
►
►
10.4
Automatically: An alternative route avoiding the traffic obstruction
will be calculated.
On Request: The message will be displayed. In this window, you
can determine whether or not an alternative route should be
calculated.
Logbook
You can use NAVIGON 7100 | 7110 to record a logbook. The logbook
is recorded in the "Logbook.xls" file. You can open the file with
Microsoft Excel. Each recorded trip is added at the bottom of the table
as a new entry.
During the first recording of a trip, the "Logbook.xls" file is created in the
"MN6 Logbook" directory on the navigation device's memory card. If
you delete or move this file, a new file will be created when you next
record a trip.
Note: Trips are recorded simultaneously in an additional file. This file is
compatible with the WISO Sparbuch 2007 program and is called
"MN6DriversLog.bin". It can also be found in the "MN6 Logbook"
directory on the navigation devices memory card.
Note: When logbook recording is started, every movement of the
vehicle will be recorded, even when you are not navigating.
Starting a recording
1. Tap on Options > Logbook.
2. Enter the required details.
3. Tap the Start button.
Stopping the recording
1. Tap on Options > Logbook.
2. Tap the Stop button.
Note: A dialog window opens when you have reached your destination.
Specify whether you would like to end logbook recording or not.
- 46 -
Useful functions
User's manual NAVIGON 7100 | 7110
11
Configuring NAVIGON 7100 | 7110
The SETTINGS window is where you can adapt NAVIGON 7100 | 7110
to suit your personal requirements.
The settings can be reached via the options of several windows.
►
Tap on Options > Settings.
The SETTINGS window has several buttons:
Current Map, POI, Basic Settings and Route Profile.
►
Tap a button to open the corresponding settings window.
The settings of the individual windows are distributed on several
windows. You can toggle between these windows with the
(To the Left) and
(To the Right) buttons.
Some settings can only accept two or three different values. These
settings can be recognised by the
(Toggle) button. All potential
values are visible. The value that is currently valid is highlighted in
black.
►
Tap the
values.
(Toggle) button to alternate between the potential
Some settings can accept several different values. These settings can
be recognised by the
is visible.
1. Tap the
(List) button. The value that is currently valid
(List) button.
A list with all potential values opens. The value that is currently valid
is marked.
2. Tap the desired value. It is now marked.
3. Tap the OK button.
The list closes again. The new value will be displayed.
For each setting there is a
(Help) button. When you tap it, you will
see a precise explanation of the corresponding setting.
Configuring NAVIGON 7100 | 7110
- 47 -
User's manual NAVIGON 7100 | 7110
You can close the settings windows in two ways:
►
Tap the Done button.
Any changes you have made will be adopted.
►
Tap the Cancel button.
Any changes you have made will not be adopted.
The SETTINGS window is open again.
12
Handsfree Module
The hands-free function allows you to use NAVIGON 7100 | 7110 as a
hands-free module for your mobile phone.
The mobile phones which can be used with the hands-free module are
listed on our website www.navigon.com in the "Support" area. (See
"Questions concering the product", page 7)
Caution! Please be sure to refer to the notes and warnings in the
chapter "Bluetooth Manager" on page 48.
12.1
Opening and closing the hands-free module
►
In the navigation software, tap on
(Handsfree Module).
The KEYPAD window opens.
If your mobile phone is connected to NAVIGON 7100 | 7110, you
are now able to dial a number.
►
►
Tap on
(Bluetooth HF Phone) to open the BLUETOOTH
HF PHONE window. Here you can connect NAVIGON 7100 | 7110 to
a mobile phone or open the CALL HISTORY list.
In the BLUETOOTH HF PHONE window, tap on
(Close).
The window from which the hands-free module was opened is
opened again.
12.2
Bluetooth Manager
The BLUETOOTH MANAGER window contains extensive configuration
options. It can be reached with the
Manager).
- 48 -
button (Bluetooth
Handsfree Module
User's manual NAVIGON 7100 | 7110
Note: These settings in the BLUETOOTH MANAGER window do not have
to be changed in order to operate the hands-free module. NAVIGON
urgently recommends not to change these settings and not to use the
other functions. NAVIGON accepts no liability for any consequences of
using the functions or of changing the settings in the BLUETOOTH
MANAGER window.
Caution! Be sure to create a backup of the NAVIGON 7100 | 7110
memory card before you open the BLUETOOTH MANAGER window! This
is very easy to do with the NAVIGON Fresh software which can be
downloaded free of charge from our website www.navigon.com.
Caution! You should only use the options in the BLUETOOTH MANAGER
window if you are absolutely certain about the consequences.
12.3
Connecting to a telephone
NAVIGON 7100 | 7110 must be connected to a mobile phone in order
to use the telephone functions.
12.3.1
Pairing with a mobile phone
Pairing describes the procedure involved when connecting two
Bluetooth devices for the first time. It is necessary to enter a password
into both devices in the process. This password is stored on both
devices, so that further entry is not necessary by subsequent
connections.
Pairing must be initiated from the mobile phone.
Please consult the mobile phone's manual if you are uncertain about
how to carry out the following steps on the mobile phone.
1. Ensure that Bluetooth is activated on the mobile phone.
2. Using the mobile phone, search for other Bluetooth devices.
The navigation device is detected as NAVIGON.
3. Initiate a connection to the detected NAVIGON device.
The mobile phone prompts you to enter a password.
4. Enter a four digit password (user-defined).
On NAVIGON 7100 | 7110, the PASSKEY REQUESTED window
opens.
5. In the Passkey field, enter the same password that was entered in
the mobile phone.
Handsfree Module
- 49 -
User's manual NAVIGON 7100 | 7110
6. Tap on
> OK.
The BLUETOOTH HF PHONE window opens. A connection is
established between the two devices. At the bottom edge of the
screen, the name of the connected mobile phone is displayed.
Note: With some mobile phones you must first enter a password on the
NAVIGON 7100 | 7110. Then enter the same password on the mobile
phone.
12.3.2
Connecting to a mobile phone
The word connect describes any subsequent connections between
paired Bluetooth devices. No further password entry is necessary when
connecting.
Note: If the battery of the NAVIGON 7100 | 7110 was empty, all data
about previous pairings with mobile phones will have been deleted. You
must then pair your mobile phone again. (See "Pairing with a mobile
phone", page 49)
Connections must be initiated using NAVIGON 7100 | 7110.
Note: Some mobile phones connect automatically to the
NAVIGON 7100 | 7110 without you needing to initiate this connection.
1. Ensure that Bluetooth is activated on the mobile phone.
2. In the BLUETOOTH HF PHONE window, tap on
(Connect).
Note: Some mobile phones require the connection to be initiated from
the mobile phone. Please consult the mobile phone's manual if you are
uncertain about how to carry out the necessary steps on the mobile
phone.
A connection is established between the two devices. The name of the
connected mobile phone is displayed at the bottom edge of the
BLUETOOTH HF PHONE window.
12.4
Accepting a call
When you receive a call, the INCOMING CALL window opens. If the
corresponding information is available, it will display the callers number.
- 50 -
Handsfree Module
User's manual NAVIGON 7100 | 7110
►
Tap on
(Pick up, bottom left, green handset) if you
want to take the call.
The CALL IN PROGRESS window opens.
►
►
12.5
Tap on
(Hang up, bottom right, red handset) if you do
not want to take the call.
Tap on
tone.
(Ring Tone Off) if you want to turn off the ring
Calling
With NAVIGON 7100 | 7110 you can make a call in various ways:
12.5.1
Dialling a telephone number
1. In the navigation software, tap on
- OR -
In the BLUETOOTH HF PHONE window, tap on
(Handsfree Module).
(Keypad).
2. Enter the desired telephone number.
3. Tap on
12.5.2
(Make a call).
Calling most recently dialled, received or missed numbers
1. In the navigation software, tap on
and then on
- OR -
(Handsfree Module)
(Call History).
in the BLUETOOTH HF PHONE window, tap on
History).
(Call
2. Select one of the following lists:
Handsfree Module
- 51 -
User's manual NAVIGON 7100 | 7110
(Incoming calls)
(Outgoing calls)
(Missed calls)
3. Tap on the desired number.
(Make a call) until a '+' is displayed on
4. Tap repeatedly on
the button (
).
The number will be dialled as soon as you let go of the button.
Note: Incoming and missed calls only appear in the CALL HISTORY list
when the caller's telephone number was transmitted.
►
►
12.5.3
Tap on the
button (Delete) to delete the selected entry.
Tap on the
in the list.
button (Delete All) to delete all of the entries
Dialling on the mobile phone
When NAVIGON 7100 | 7110 is connected to a mobile phone, it
functions as a hands-free kit even when the number was dialled from
the mobile phone. You can also make use of the mobile phone's
telephone book.
Note: Calls made from the mobile phone do not appear in the CALL
HISTORY list.
12.6
During a call
You are calling using the hands-free module. The CALL IN PROGRESS
window is open.
The interlocutor's telephone number, the duration of the call and the
volume are displayed.
Note: The interlocutor's telephone number will not be displayed if it was
not transmitted during the call or if the number was dialled on the
mobile phone.
- 52 -
Handsfree Module
User's manual NAVIGON 7100 | 7110
12.6.1
Adjusting the volume
►
In the CALL IN PROGRESS window, tap on
(Louder) or
(Quieter) to adjust the volume of the conversation. The
volume will be displayed in the CALL IN PROGRESS window.
This setting does not affect the volume of the navigation instructions.
12.6.2
Muting the microphone
During the call, you can mute the microphone so that you can talk to
someone without the interlocutor hearing.
►
In the CALL IN PROGRESS window, tap on
switch off the microphone.
(Mute) to
The interlocutor is no longer able to hear you. The modified icon on
the button indicates this.
►
12.6.3
Tap on
(Mute) to switch the microphone on again.
Transferring a call to the mobile phone
1. In the CALL IN PROGRESS window, tap on
Phone).
(Use Mobile
2. Pick up the mobile telephone and continue the conversation.
The CALL IN PROGRESS window remains open.
12.6.4
Transferring a call from your mobile telephone
With NAVIGON 7100 | 7110, you can transfer a call from your mobile
phone if a Bluetooth connection exists between the two devices.
1. In the CALL IN PROGRESS window, tap on
handsfree).
(Use
2. Continue the call on the hands-free kit.
You will be prompted to confirm whether you want to transfer the
call.
Handsfree Module
- 53 -
User's manual NAVIGON 7100 | 7110
Note: If Bluetooth is activated on the mobile phone, the connection can
also be established during a call. (See chapter "Connecting to a mobile
phone" on page 50)
12.6.5
Entering numbers
You can enter numbers during a call. This may be the case, for
example, if a further connection via a telephone system is necessary.
1. In the CALL IN PROGRESS window, tap on
(Keypad).
The appearance of the button changes. The keyboard opens.
2. Enter the desired numbers.
3. Tap on
12.6.6
(Keypad) again to close the keyboard.
Bringing the navigation software to the foreground
You can bring the navigation software to the foreground at any time. In
this way, you can bring the map to the foreground during a call when
you are navigating with NAVIGON 7100 | 7110.
►
Tap on
> Navigation.
The navigation software is now in the foreground. The CALL IN
PROGRESS bar at the top of the display indicates that a telephone
connection exists at present. It also displays, if known, the
interlocutor's telephone number.
You have the following options:
►
►
►
12.6.7
Tap on
or off again.
or
(Mute) to switch the microphone on
Tap on
(Hang up) to end the call.
In the navigation software, tap on
(Handsfree Module) to
bring the hands-free module to the foreground.
Ending the call
►
In the CALL IN PROGRESS window, tap on
end the call.
(Hang up) to
The BLUETOOTH HF PHONE window opens.
- 54 -
Handsfree Module
User's manual NAVIGON 7100 | 7110
12.7
Hands-free module troubleshooting
Many of the problems that may arise with the hands-free module can be
solved in the following way:
1. Open the BLUETOOTH HF PHONE window.
2. Deactivate Bluetooth on the mobile phone.
After a few seconds, the following message will appear: No paired
phone found.
3. Activate Bluetooth on your mobile phone again.
4. In the BLUETOOTH HF PHONE window, tap on
(Connect).
A connection is established between the two devices. At the bottom
edge of the BLUETOOTH HF PHONE window, the name of the
connected mobile phone is displayed.
Please consult the mobile phone's manual if you are uncertain about
how to activate or deactivate Bluetooth on your mobile phone..
If no connection can be established between the two devices, they must
be paired again. This procedure is described in chapter "Pairing with a
mobile phone" on page 49.
Handsfree Module
- 55 -
User's manual NAVIGON 7100 | 7110
13
Appendix
13.1
Technical data
Dimensions
Weight
Operating
conditions
131.6 x 92.4 x 23.0 mm
approx. 195 g
Operating
temperature
Storage
temperature
Humidity
CPU
Operating System
Display
Memory
ROM
RAM
GPS
TMC
I/O
Rechargeable
battery
Charging
Mains adapter
Car charger
cable
- 56 -
Stylus
Keyboard
Loudspeaker
Microphone
Headset
Memory card
USB
Bluetooth
Type
Period of
operation
Electronic
Duration
Input
Output
Input
Output
-10°C bis 60°C
-20°C bis 70°C
0% bis 90%, non-precipitating
Samsung 2440-400Mhz
®
Microsoft Windows CE Net 5.0
4.3”-LCD-Colour display with resistive
Touch-Panel
480 x 272 Pixels (WQVGA)
landscape format, permeable
256 MB
64 MB
built-in (SiRF GPS III, 20 channels)
Built-in antenna
Socket for external antenna
built-in (GNS FM4_V7)
Plastic-stylus
Software keyboard
built-in
built-in
3.5 mm phone jack
SD, MMC
USB 1.1
CSR Bluescore 4
Li-Ion, 1200 mAh
up to 4 hours
built-in
approx. 4-5 hours
100-240V ~ (Alternating current, AC)
5V =, 1A (Direct current, DC)
12V = (Direct current, DC)
5V =, 1A (Direct current, DC)
Appendix
User's manual NAVIGON 7100 | 7110
13.2
Declaration of Conformity
Products with the CE marking comply with Radio & Telecommunication
Terminal Equipment Directive (R&TTE) (1999/5/ECC), the
Electromagnetic Compatibility Directive (89/336/ECC) and the Low
Voltage Directive (73/23/ECC) – as amended by Directive 93/68/ECC issued by the European Community Commission.
Accordance with these directives implies conformity with the following
European Standards:
EN301489-1
EN301489-3
EN55022
EN55024
EN61000-3-2
EN61000-3-3
EN60950 / IEC 60950
The manufacturer is not liable for modifications made by the user which
may alter the device's conformity with the CE label, nor the
consequences thereof.
Appendix
- 57 -
User's manual NAVIGON 7100 | 7110
14
Index
B
E
Block............................................ 40, 44
Bluetooth
Connect ........................................ 50
Connection with Mobile Phone ..... 49
Handsfree Module ........................ 48
Pairing........................................... 49
Symbols ........................................ 15
Energy......................................... 10, 14
Entering data..................................... 16
C
G
Calibration ......................................... 35
Call History ........................................ 51
Configuration ..................................... 47
Current Position
Save.............................................. 43
GPS
Faulty reception ............................ 19
Initialise......................................... 19
Signals.......................................... 11
Symbols ........................................ 14
GPS status ........................................ 43
D
Data entry.......................................... 16
Destination
Direct Access................................ 24
Enter an Address .......................... 21
Favourites ..................................... 25
From Map ..................................... 27
Home Address ........................ 26, 29
Input Sequence............................. 21
Last Destinations .......................... 25
My Destinations ............................ 25
New Destination............................ 20
Save.............................................. 29
Search for POI .............................. 22
in a City .................................... 23
Nationwide................................ 23
Nearby...................................... 22
Start Navigation ............................ 27
Take Me Home ....................... 26, 29
Turn-by-Turn List .......................... 28
Voice Command ..................... 26, 29
- 58 -
F
Factory Settings ................................ 36
H
Handsfree Module
Call History ................................... 51
Call in Progress
Hang up.................................... 54
Keypad ..................................... 54
Mute ......................................... 53
Navigation ................................ 54
Troubleshooting ....................... 55
Use handsfree.......................... 53
Use Mobile Phone.................... 53
Volume ..................................... 53
Hang up ........................................ 54
Incoming Call................................ 50
Keypad ......................................... 54
Make a call
Call History............................... 51
Dial a Number .................... 51, 52
Mute.............................................. 53
Navigation..................................... 54
Troubleshooting............................ 55
Use handsfree .............................. 53
Use Mobile Phone ........................ 53
Volume ......................................... 53
Index
User's manual NAVIGON 7100 | 7110
Handsfree Module
Close............................................. 48
Connect ........................................ 50
Connection with Mobile Phone ..... 49
Open ............................................. 48
Pairing........................................... 49
Handsfree Module ............................. 48
Home Address............................. 26, 29
Hotline ................................................. 7
I
Input Sequence ................................. 21
Interim Destination ............................ 39
K
Keyboard ........................................... 16
L
Logbook....................................... 34, 46
M
Main Window..................................... 19
Make a call
Call History ................................... 51
Dial a Number ......................... 51, 52
Manual
Symbols .......................................... 6
Map
Destination search ........................ 41
Navigation..................................... 38
Preview ......................................... 36
Reality View .................................. 40
Memory card ....................................... 9
Menu ................................................. 17
My Destinations................................. 25
N
Navigation
Block ....................................... 40, 44
Interim Destination........................ 39
Index
No GPS reception................... 28, 34
POI on Your Route ....................... 40
Route Profile........................... 28, 33
Skip Route Point........................... 40
Start ........................................ 27, 33
Turn-by-Turn List .................... 28, 33
NAVIGON 7100 | 7110
Description...................................... 8
Energy .......................................... 10
Installation .................................... 10
Memory card................................... 9
Scope of Delivery ........................... 7
Start .............................................. 19
TMC .............................................. 11
New Destination ................................ 20
O
Options........................................ 17, 34
P
Password Lock.................................. 17
POI
Direct Access................................ 24
in a City......................................... 23
Nationwide.................................... 23
Nearby .......................................... 22
POI on Your Route............................ 40
Product Information........................... 35
R
Reality View ...................................... 40
Recalculate Route............................. 46
Route Planning ................................. 30
Route points
Delete ........................................... 31
Indicate ......................................... 31
Order ............................................ 31
Route Profile ............................... 28, 33
Routes
Calculate....................................... 32
Manage......................................... 32
Planning........................................ 30
Route points ................................. 31
- 59 -
User's manual NAVIGON 7100 | 7110
Route Profile ................................. 33
Save.............................................. 32
Simulation ..................................... 33
Start Navigation ............................ 33
Starting Point ................................ 30
Turn-by-Turn List .......................... 33
S
Safety information ............................. 11
Scope of Delivery ................................ 7
Search for POI
Direct Access................................ 24
in a City......................................... 23
Nationwide .................................... 23
Nearby .......................................... 22
Service ................................................ 7
Settings
Calibration..................................... 35
Configuration ................................ 47
Factory Settings ............................ 36
Product Information ...................... 35
Volume.......................................... 14
Simulation
Quit ............................................... 33
Start .............................................. 33
Skip Route Point................................ 40
Software keyboard ............................ 16
Support................................................ 7
Symbols used in this manual .............. 6
T
Telephone
Connect ........................................ 50
Connection with Mobile Phone ..... 49
Pairing .......................................... 49
Telephone ......................................... 48
TMC
Recalculate Route ........................ 46
Show............................................. 45
Symbols ........................................ 15
Tuning Mode................................. 45
TMC Settings
Recalculate Route ........................ 46
TMC .............................................. 45
Traffic Information......................... 45
Tuning Mode................................. 45
Trade marks ........................................ 6
Traffic Information
Recalculate Route ........................ 46
Show............................................. 45
Tuning Mode................................. 45
Tuning Mode ..................................... 45
Turn-by-Turn List
Block............................................. 44
Show................................. 28, 33, 43
V
Voice Command ......................... 26, 29
Volume .............................................. 14
W
Warranty.............................................. 6
Take Me Home............................ 26, 29
- 60 -
Index
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement