advertisement
▼
Scroll to page 2
of 120
No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. The Guide to Digital Photography with the DIGITAL CAMERA (En) Fuji Bldg., 2-3 Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan TR3L03(11) 6MAA9511-A 1AG6P1P1940-A Trademark Information Apple, the Apple logo, Macintosh, Mac OS, Power Macintosh, PowerBook, and Quick Time are registered trademarks of Apple Computer, Inc. Finder, Power Mac, iMac, and iBook are trademarks of Apple Computer, Inc. Microsoft and Windows are registered trademarks of Microsoft Corporation. Internet is a trademark of Digital Equipment Corporation. Adobe and Acrobat are registered trademarks of Adobe Systems Inc. The SD logo is a trademark of the SD Card Association. PictBridge is a trademark. All other trade names mentioned in this manual or the other documentation provided with your Nikon product are trademarks or registered trademarks of their respective holders. For Your Safety The consequences that could result from failure to observe the precautions listed in this section are indicated by the following symbol: This icon marks warnings, information that should be read before using your Nikon product to prevent possible injury. WARNINGS Turn off immediately in the event of malfunction Should you notice smoke or an unusual smell coming from the equipment or from the AC adapter (available separately), unplug the AC adapter and remove the batteries immediately, taking care to avoid burns. Continued operation could result in injury. After removing the batteries, take the equipment to a Nikon-authorized service center for inspection. Do not use in the presence of flammable gas Do not use electronic equipment in the presence of flammable gas, as this could result in explosion or fire. Observe caution when using the camera strap Never place the strap around the neck of an infant or child. Do not disassemble Touching the product's internal parts could result in injury. In the event of malfunction, the product should be repaired only by a qualified technician. Should the product break open as the result of a fall or other accident, take the product to a Nikon-authorized service center for inspection after unplugging the AC adapter and removing the batteries. Observe proper precautions when handling batteries Batteries may leak or explode if improperly handled. Observe the following precautions when handling batteries for use in this product: • Before replacing the batteries, turn the camera off and make sure the poweron lamp has gone out. If you are using an AC adapter, be sure it is unplugged. • Use a pair of rechargeable Nikon EN-MH1 NiMH batteries, one CRV3 lithium battery, two ZR6 (AA) nickel manganese batteries, LR6 (AA) alkaline batteries, or two FR6/ L91 (AA) lithium batteries. Do not use other types of battery. Do not mix batteries of different types. • When inserting batteries, do not attempt to insert them upside down or backwards. • Do not short or disassemble batteries. i Notices/For Your Safety To prevent damage to your Nikon product or injury to yourself or to others, read the following safety precautions in their entirety before using this equipment. Keep these safety instructions where all those who use the product will read them. Notices/For Your Safety • Do not expose batteries to flame or to excessive heat. • Do not immerse in or expose to water. • Do not transport or store with metal objects such as necklaces or hairpins. • Batteries are prone to leakage when fully discharged. To avoid damage to the product, be sure to remove the batteries when no charge remains. • When the battery is not in use, at tach the terminal cover and store in a cool place. • Immediately after use, or when the product is used on battery power for an extended period, the batteries may become hot. Before removing the batteries, turn the camera off and allow the batteries to cool. • Discontinue use immediately should you notice any changes in the batteries, such as discoloration or deformation. Use appropriate cables When connecting cables to the input and output jacks, use only the cables provided or sold by Nikon for the purpose, to maintain compliance with product regulations. Keep out of reach of children Particular care should be taken to prevent infants from putting the batteries or other small parts into their mouths. Removing memory cards Memory cards may become hot during use. Observe due caution when removing memory cards from the camera. ii CD-ROMs The CD-ROMs on which the software and manuals are distributed should not be played back on audio CD equipment. Playing CD-ROMs on an audio CD player could cause hearing loss or damage the equipment. Observe caution when operating the flash Using the flash close to your subject's eyes could cause temporary visual impairment. Particular care should be observed if photographing infants, when the flash should be no less than one meter (39″) from the subject. Avoid contact with liquid crystal Should the monitor break, care should be taken to avoid injury due to broken glass and to prevent liquid crystal from the monitor touching the skin or entering the eyes or mouth. Cautions Keep dry Do not drop The device will be damaged if immersed in water or subjected to high levels of moisture. The product may malfunction if subjected to strong shocks or vibration. Handle the lens and all moving parts with care Do not apply force to the lens or lens cover, or to the connector, card slot, or battery chamber covers. These parts are especially susceptible to damage. Turn the product off before removing or disconnecting the power source Do not unplug the product or remove the batteries while the product is on, or while images are being recorded or deleted. Forcibly cutting power in these circumstances could result in loss of data or in damage to product memory or internal circuitry. To prevent an accidental interruption of power, avoid carrying the product from one place to another while the AC adapter (available separately) is connected. Keep away from strong magnetic fields Do not use or store this device in the vicinity of equipment that generates strong electromagnetic radiation or magnetic fields. Strong static charges or the magnetic fields produced by equipment such as radio transmitters could interfere with the monitor, damage data stored on the memory card, or affect the product's internal circuitry. Avoid sudden changes in temperature Sudden changes in temperature, such as occur when entering or leaving a heated building on a cold day, can cause condensation inside the device. To prevent condensation, place the device in a carrying case or a plastic bag before exposing it to sudden changes in temperature. Do not point the lens at strong light sources for extended periods Avoid pointing the lens at the sun or other strong light sources for extended periods when using or storing the camera. Intense light may cause deterioration in the CCD image sensor, producing a white blur effect in photographs. iii Notices/For Your Safety To ensure continued enjoyment of your Nikon product, observe the following precautions when storing or using the device: Notices Notices/For Your Safety • No part of the manuals included with this product may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form, by any means, without Nikon's prior written permission. • Nikon reserves the right to change the specifications of the hardware and software described in these manuals at any time and without prior notice. • Nikon will not be held liable for any damages resulting from the use of this product. • While every effort has been made to ensure that the information in these manuals is accurate and complete, we would appreciate it were you to bring any errors or omissions to the attention of the Nikon representative in your area (address provided separately). Notice for customers in the U.S.A. Federal Communications Commission (FCC) Radio Frequency Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. • Increase the separation between the equipment and receiver. • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. E3200/E2200 Tested To Comply With FCC Standards FOR HOME OR OFFICE USE • Consult the dealer or an experienced radio/ television technician for help. CAUTIONS Modifications The FCC requires the user to be notified that any changes or modifications made to this device that are not expressly approved by Nikon Corporation may void the user's authority to operate the equipment. Interface Cables Use the interface cables sold or provided by Nikon for your equipment. Using other interface cables may exceed the limits of Class B Part 15 of the FCC rules. Notice for customers in the State of California WARNING: Handling the cord on this product will expose you to lead, a chemical known to the State of California to cause birth defects or other reproductive harm. Wash hands after handling. Nikon Inc., 1300 Walt Whitman Road, Melville, New York 11747-3064, U.S.A. Tel.: 631-547-4200 iv Notice for customers in Canada ATTENTION Cet appareil numérique de la classe B respecte toutes les exigences du Règlement sur le matériel brouilleur du Canada. Notice Concerning Prohibition of Copying or Reproduction Note that simply being in possession of material that has been digitally copied or reproduced by means of a scanner, digital camera or other device may be punishable by law. • Items prohibited by law from • Cautions on certain copies and being copied or reproduced reproductions The government has issued cautions Do not copy or reproduce paper on copies or reproductions of securimoney, coins, securities, governties issued by private companies ment bonds, or local government (shares, bills, checks, gift certificates, bonds, even if such copies or reproetc.), commuter passes, or coupon ductions are stamped "Sample." tickets, except when a minimum of The copying or reproduction of necessary copies are to be provided paper money, coins, or securities for business use by a company. which are circulated in a foreign Also, do not copy or reproduce passcountry is prohibited. ports issued by the government, Unless the prior permission of the licenses issued by public agencies and government has been obtained, the private groups, ID cards, and tickets, copying or reproduction of unused such as passes and meal coupons. postage stamps or post cards issued • Comply with copyright notices by the government is prohibited. The copying or reproduction of The copying or reproduction of copyrighted creative works such as stamps issued by the government books, music, paintings, woodcut and of certified documents stipuprints, maps, drawings, movies, and lated by law is prohibited. photographs is governed by national and international copyright laws. Do not use this product for the purpose of making illegal copies or to infringe copyright laws. v Notices/For Your Safety CAUTION This class B digital apparatus meets all requirements of the Canadian Interference Causing Equipment Regulations. Before Taking Important Pictures Notices/For Your Safety Before taking pictures on important occasions (such as at weddings or before taking the camera with you on a trip), take a test shot to ensure that the camera is functioning normally. Nikon will not be held liable for damages or lost profits that may result from product malfunction. Use Only Nikon Brand Electronic Accessories Your Nikon COOLPIX camera is designed to the highest standards and includes complex electronic circuitry. Only Nikon brand electronic accessories (including battery chargers, batteries, and AC adapters) certified by Nikon specifically for use with your Nikon digital camera are engineered and proven to operate within the operational and safety requirements of this electronic circuitry. THE USE OF NON-NIKON ELECTRONIC ACCESSORIES COULD DAMAGE YOUR CAMERA AND MAY VOID YOUR NIKON WARRANTY. For more information about Nikon brand accessories, contact your local authorized Nikon dealer. vi Table of contents For Your Safety ............................................................................................... i Cautions ........................................................................................................iii Notices ..........................................................................................................iv Before You Begin........................................................................1 Introduction ................................................................................................... 1 Parts of the Camera........................................................................................ 2 The Monitor ................................................................................................... 4 The Mode Dial................................................................................................ 6 Navigating the Menus .................................................................................... 7 The Shutter-Release Button ............................................................................ 7 First Steps ....................................................................................8 Inserting Batteries........................................................................................... 8 Inserting Memory Cards ............................................................................... 10 Checking the Battery Level ........................................................................... 12 Basic Setup................................................................................................... 14 Basic Photography ....................................................................16 Step 1 - Select P Mode............................................................................. 16 Step 2 - Frame the Picture ............................................................................ 18 Step 3 - Focus and Shoot.............................................................................. 20 Step 4 - View the Results (Full-screen Playback Mode)................................... 22 More on Photography ..............................................................24 When Lighting Is Poor: Using the Flash ......................................................... 24 Taking a Self-Portrait: Using the Self-Timer ................................................... 26 Easy Close-ups: Macro Close-up Mode ......................................................... 27 Assist and Scene Modes ............................................................................... 28 Framing Assist .............................................................................................. 29 e Scene Mode ......................................................................................... 34 More on Playback .....................................................................40 Viewing Pictures on the Camera ................................................................... 40 Cropping Pictures .................................................................................... 42 Voice Memos: Recording and Playback (E3200 only) ................................ 43 Viewing Pictures on TV ................................................................................. 44 Viewing Pictures on a Computer................................................................... 45 Printing Pictures............................................................................................ 48 Printing Via Direct USB Connection............................................................... 52 Movies .......................................................................................56 W Recording Movies ................................................................................... 56 Viewing Movies ............................................................................................ 60 vii The Shooting Menu ..................................................................61 Using the Shooting Menu............................................................................. 61 Image Mode................................................................................................. 63 White Balance .............................................................................................. 65 Exp. +/- ........................................................................................................ 67 Continuous .................................................................................................. 68 Best Shot Selector......................................................................................... 69 Color Options............................................................................................... 70 The Playback Menu...................................................................71 Using the Playback Menu ............................................................................. 71 Slide Show ................................................................................................... 72 Delete .......................................................................................................... 73 Protect ......................................................................................................... 75 Auto Transfer ............................................................................................... 76 Small Picture................................................................................................. 78 Copy ............................................................................................................ 79 The Setup Menu........................................................................82 Using the Setup Menu.................................................................................. 82 Welcome Screen........................................................................................... 83 Date ............................................................................................................. 84 Monitor Settings........................................................................................... 86 Date Imprint ................................................................................................. 87 Brightness .................................................................................................... 89 Sound Settings ............................................................................................. 90 Blur Warning ................................................................................................ 91 Auto Off....................................................................................................... 92 Format memory/card .................................................................................... 93 Language ..................................................................................................... 94 Video Mode ................................................................................................. 94 Reset All ....................................................................................................... 94 Battery Type ................................................................................................. 96 Firmware Version.......................................................................................... 96 Technical Notes .........................................................................97 Optional Accessories..................................................................................... 97 Caring for Your Camera ............................................................................... 98 Error Messages ........................................................................................... 100 Troubleshooting ......................................................................................... 103 Specifications ............................................................................................. 106 Index .......................................................................................................... 108 viii Introduction Thank you for your purchase of a Nikon COOLPIX3200 (E3200)/COOLPIX2200 (E2200) digital camera. This manual has been written to help you enjoy taking pictures with your Nikon digital camera. Read this manual thoroughly before use, and keep it handy when using the product. To make it easier to find the information you need, the following symbols and conventions are used: This icon marks tips, additional information you may find helpful when using your camera. This icon marks notes, information that you should read before using your camera. This icon indicates that more information is available elsewhere in this manual or in the Quick Start Guide. Q Internal Memory and SD Memory Card This camera uses both an internal memory and an SD memory card for storing pictures. If you insert a card into the camera, pictures will automatically be stored on the card instead of in the memory. To store, view or delete pictures in the memory or to format the memory, remove the memory card first. Life-Long Learning As part of Nikon's "Life-Long Learning" commitment to ongoing product support and education, continually-updated information is available on-line at the following sites: • For users in the U.S.A.: http://www.nikonusa.com/ • For users in Europe: http://www.europe-nikon.com/support • For users in Asia, Oceania, the Middle East, and Africa: http://www.nikon-asia.com/ Visit these sites to keep up-to-date with the latest product information, tips, answers to frequently-asked questions (FAQs), and general advice on digital imaging and photography. Additional information may be available from the Nikon representative in your area. See the URL below for contact information: http://www.nikonimaging.com/eng/ Before You Begin Introduction 1 Before You Begin This icon marks cautions, information you should read before use to prevent damage to your camera. Parts of the Camera Power switch (Q 12) Power-on lamp (Q 12) Speaker (E3200 only) Built-in Speedlight (Q 24) Shutter-release button (Q 7) Microphone (E3200 only) Before You Begin Eyelet for camera strap Memory card slot cover (Q 10) Attaching the Camera Strap 2 Viewfinder (Q 18) Self-timer lamp (Q 26)/ Red-eye reduction lamp (E3200 only) (Q 24) AF-Assist illuminator (E3200 only) (Q 24) Lens (Q 18) Parts of the Camera Red (!) lamp (Q 20) Mode dial (Q 6) Green (AF) lamp (Q 20) MENU button (Q 61) Multi selector (!/Y/&/V) (Q 7) u(delete) button (Q 22, 23) x(play) button (Q 22, 23) Monitor (Q 5, 18) Tripod socket (Q 25, 26) Battery-chamber cover (Q 8) Battery-chamber cover latch (Q 8) Interface connector cover (Q 44, 46) Interface connector cover USB connector (Q 46) Audio/video (AV) out connector (E3200 only) (Q 44)/ Video output connector (E2200 only) (Q 44) 3 Before You Begin Viewfinder (Q 18) Zoom (l/O ) buttons (Q 18) The Monitor Shooting AE-L 2 1 3 4 5 6 22 19 21 20 7 8 Before You Begin 18 17 16 10 11 AUTO 15 14 9 12 999 13 1 Shooting mode . . . . . . . . . . . . . 16 2 AE-L1 . . . . . . . . . . . . . . . . . . . . . 38 12 Date counter/ stored date number . . . . . . . . . . 88 3 Focus indicator. . . . . . . . . . . . . . 20 4 Zoom indicator2 . . . . . . . . . . . . . 18 13 Number of exposures remaining/ length of movie. . . . . . . . 16, 17, 56 5 Battery level indicator3 . . . . . . . . 12 14 Flash mode . . . . . . . . . . . . . . . . . 24 6 Internal memory/memory card indicator. . . . . . . . . . . . . . . . . . . 16 15 Image mode . . . . . . . . . . . . . . . . 63 7 Camera shake icon4 . . . . . . . . . . 25 17 Sensitivity gain indicator6 . . . . . . 25 8 Time zone . . . . . . . . . . . . . . . . . 84 18 Continuous shooting mode. . . . . 68 9 "Date not set" icon5 . . . . . . . . . 14 19 Best Shot Selector (BSS). . . . . . . . 69 10 Self-timer indicator. . . . . . . . . . . 26 20 White balance . . . . . . . . . . . . . . . 65 11 Date imprint indicator . . . . . . . . 87 21 Color options . . . . . . . . . . . . . . . 70 16 Exposure compensation . . . . . . . 67 22 Macro close-up mode . . . . . . . . . 27 1 Appears when taking pictures with Panorama Assist 2 Displayed when zoom buttons are pressed. 3 Appears when batteries are running low. Appears at slow shutter speeds to warn that 4 pictures may be blurred. 4 5 Appears when camera clock has not been set. 6 Indicates that camera has raised sensitivity automatically. The Monitor Playback 17 16 12 1 2004.08 2004 08.05 05 12:00 00 2 3 15 14 13 4 5 6 8 10 8 10 9 1 2 3 4 5 6 7 8 Current folder . . . . . . . . . . . . . . 23 File number and type . . . . . . . . . 23 Internal memory/memory card indicator . . . . . . . . . . . . . . . . . . 16 Battery level indicator1 . . . . . . . . 12 Volume indicator2 . . . . . . . . . . . 60 Voice memo recording guide2 . . 43 Voice memo playback guide2 . . . 43 Current frame number/total number of frames/length of movie . . 23, 60 9 10 11 12 13 14 15 16 17 Movie playback indicator . . . . . . 60 Voice memo icon2 . . . . . . . . . . . 43 Image mode. . . . . . . . . . . . . . . . 63 Movie indicator . . . . . . . . . . . . . 57 Protect icon . . . . . . . . . . . . . . . . 75 Print-order icon . . . . . . . . . . . . . 48 Transfer icon . . . . . . . . . . . . . . . 76 Time of recording. . . . . . . . . . 14-15 Date of recording. . . . . . . . . . 14-15 1 Appears when batteries are running low. 2 E3200 only. Controlling the Monitor To hide or display indicators in the monitor, select the Monitor settings option in the setup menu. (Q 86) AUTO 19 Monitor shows current settings and view through lens Monitor shows view through lens only Monitor shows framing grid Monitor off Monitor turns off while flash is charging (Q 20). 5 Before You Begin 11 7 The Mode Dial Using the mode dial, you can select from seven shooting modes and setup mode. Choose a shooting mode according to shooting conditions. To select a mode, align the mode icon with the "_" mark next to the mode dial. P Auto (Q 16) Before You Begin Choose this mode to take pictures. Select from six shooting menus to achieve the desired effect. W Movie (Q 56-59) Choose from three kinds of movies. Make movies with sound using E3200, or using E2200 for silent movies only. e Scene (Q 28, 34) Choose from eleven "scenes" suited to different subjects or shooting conditions and let the camera do the rest. i Portrait Assist f Setup (Q 82) Choose this mode to display the setup menu, where you can perform such tasks as setting the camera clock and adjusting monitor brightness. 6 N Landscape Assist j Sports Assist m Night Portrait Assist Use framing assist to help compose pictures suited to a particular type of subject (Q 28-33). Navigating the Menus The multi selector is used to navigate through the camera menus. Move cursor up Press center (a) to make selection Cancel and return to previous menu, or move cursor left Display sub-menu, move cursor right, or make selection. The Shutter-Release Button Your camera has a two stage shutter-release button. The camera sets focus and exposure when the button is pressed halfway. The green (AF) lamp next to the viewfinder will light when the focus operation is complete. Focus and exposure will remain locked while the shutter-release button is pressed halfway. To take the picture, press the shutter-release button the rest of the way down. 7 Before You Begin Move cursor down First Steps Inserting Batteries Your camera uses: • LR6 (AA) alkaline batteries (×2), or • Nikon EN-MH1 rechargeable nickel-metal hydride (NiMH) batteries (×2), or • ZR6 (AA) nickel manganese batteries (×2), or • FR6/L91 (AA) lithium batteries (×2), or • CR-V3 lithium batteries (×1) 2 1 1 Open the battery-chamber cover 2 Insert the batteries 3 Close the battery-chamber cover • Pressing the battery-chamber latch (g;c), slide the battery-chamber cover out (d). • Insert the batteries as shown in the label inside the battery chamber. AA batteries First Steps CR-V3 1 2 • Close the battery-chamber cover (c) and slide it in until it latches (d). Be sure that the battery-chamber cover is properly latched. [IMPORTANT] Battery Type To improve battery performance, select the type of battery currently inserted in the camera in the setup menu. The default setting is Alkaline. When any other type of battery is used, turn the camera on and change the setting (Q 96). 8 Inserting Batteries Replacing Batteries Turn the camera off and make sure that the power-on lamp has gone out before removing or inserting batteries. Read Battery Warnings Read and follow all warnings and instructions supplied by the battery manufacturer. Damaged Batteries The following batteries can not be used: • Batteries with peeling or damaged insulation. Using batteries with damaged insulation could result in leakage, overheating, or rupture. Note that due to manufacturing defects even new batteries may have faulty insulation. • Batteries with insulation that covers only the sides of the battery and not the area around the negative terminal. • Batteries with a flat negative terminal. Do not use such batteries even if the insulation adequately covers the area around the negative terminal. Alkaline Batteries EN-MH1 Batteries Using an MH-70 battery charger, charge EN-MH1 batteries before first use. Charge each pair of batteries at the same time — do not charge batteries one at a time or mix batteries with different charges. Note that EN-MH1 batteries may discharge quickly immediately after purchase or after the batteries have been left unused for an extended period. This is normal, and the batteries will retain a charge for longer periods after being used and recharged several times. For more information on charging batteries, see the documentation provided with the MH-70. Alternative Power Sources • To power the camera continuously for extended periods, use an EH-62B AC adapter (Q 97). Do not, under any circumstances, use another make or model of AC adapter. Failure to observe this precaution could result in overheating or in damage to the camera. • We recommend that you buy CR-V3 lithium batteries as a back-up power source. 9 First Steps Performance of alkaline batteries may vary greatly depending on the manufacturer. Choose a reliable brand. Inserting Memory Cards Pictures can be stored in the camera's internal memory (about 14.5 MB) or on Secure Digital (SD) memory card. If no memory card has been inserted in the camera, pictures will be stored in the memory, and if the camera contains a memory card, then pictures will automatically be stored on the card. To store pictures in the internal memory, remove the memory card. 1 Confirm that the camera is off 2 Open the memory card slot cover 3 Insert the memory card • The power-on lamp should be off. First Steps • Insert the memory card in the direction of the arrow as shown in the label on the underside of the memory card slot cover. Insert straight without bending. Inserting Memory Cards Terminals Direction of insertion Front Insert the memory card terminals first. Inserting the card upside down or backwards could damage the camera or the card. Check to be sure the card is in the correct orientation. 4 10 Close the memory card slot cover Inserting Memory Cards Formatting Memory Cards Memory cards must be formatted before first use. For information on formatting memory cards, see "The Setup Menu: Format memory/card" (Q 93). Removing Memory Cards Memory cards can be removed without loss of data when the camera is off. To remove memory cards, turn the camera off and confirm that the power-on lamp is off. Do not open the memory card slot cover while the power-on lamp is lit. Open the memory card slot cover and press the memory card to partially eject the card. The card can then be removed by hand. Memory Cards • Use only Secure Digital (SD) memory cards. • Do not disassemble or modify. • Do not drop, bend, or expose to water or strong physical shocks. • Do not touch the metal terminals with your fingers or metal objects. • Do not affix labels or stickers to the memory card. • Do not leave in direct sunlight in a closed vehicle or in other areas exposed to high temperatures. • Do not expose to high levels of humidity or to corrosive gas. Write protect switch When card is locked, pictures can be played back but can not be recorded, deleted, edited, or transferred using the camera a (V) button. 11 First Steps The Write Protect Switch SD cards are equipped with a write protect switch to prevent accidental loss of data. When this switch is in the "lock" position, pictures can not be recorded, deleted, or edited, and the card can not be formatted. Do not lock the card when taking, deleting, or editing pictures. Checking the Battery Level AUTO 19 1 Turn the camera on 2 Check the battery level in the monitor • Press the power switch. The power-on lamp will light. Rotate the mode dial to a setting other than f. • When the camera is turned on for the first time, a language selection dialog will be displayed. Choose the desired language and press center of multi selector. See "First Steps: Basic Setup" (Q 14). • Before checking the battery level, select the appropriate Battery type option in the setup menu (Q 96). Display NO ICON X First Steps WARNING!! BATTERY EXHAUSTED Meaning Batteries fully charged. Low battery. Batteries exhausted. Replace with new or fully charged batteries. The red (!) and green (AF) lamps will blink when the "BATTERY EXHAUSTED" warning is displayed. The x Button The camera can also be turned on by pressing the x button for about a second. Your most recent picture will be displayed in the monitor (Q 22). 12 Checking the Battery Level Turning the Camera Off To turn the camera off, press the power switch when the power-on lamp is lit. Do not remove the batteries or disconnect the EH-62B AC adapter until the power-on lamp has gone out. The Power-on Lamp When the power on lamp is The camera is On On Blinking In standby mode Off Off Auto Power Off (Standby Mode) Sleep Mode Turning sleep mode on will cause the camera to enter standby mode when there is no change in the brightness of the subject, even before the time selected in the AUTO OFF menu has elapsed (Q 92). 13 First Steps If no operations are performed for one minute (default setting), the monitor will turn off automatically and the camera will enter standby mode to reduce the drain on the batteries. While the camera is in standby mode, the power-on lamp will blink. If no operations are performed for three minutes after the camera enters standby mode, the camera will turn off automatically and the power-on lamp will go out. The camera will be reactivated from standby mode when you: • Press the power switch • Press the shutter-release button halfway • Press the x button to view the last picture taken • Press the MENU button to display the menu for the current mode • Rotate the mode dial to select a new mode The length of time before the camera enters standby mode can be changed using the Auto off option in the setup menu (Q 92). However, when a menu or the setup menu is displayed, the monitor will turn off after three minutes, and when pictures are being shown in a non-stop slide show (Q 72) or when the camera is powered by an AC adapter, the monitor will turn off after thirty minutes. Basic Setup The first time the camera is turned on, a language-selection dialog will be displayed in the monitor. Follow the steps below to choose a language and set the time and date. 1 LANGUAGE MENU Cancel 2 Highlight Deutsch (German), English, Español (Spanish), Français (French), Italiano (Italian), Nederlands (Dutch), Svenska (Swedish), (Japanese), (Simplified Chinese), or (Korean) and press a. Set DATE 3 DATE Set time and date? Set time and date? No Yes No Yes Confirmation dialog displayed. Highlight Yes. Select No to exit to mode currently selected with mode dial. If you exit without setting time and date, Z ("date not set") icon will flash in monitor when camera is in shooting mode and all pictures will have time stamp of "0000.00.00 00:00" (still images) or "2004.01.01.00:00" (movies). First Steps 4 TIME ZONE 2004. 01. 01 00 : 00 London, Casablanca :DaylightSaving 5 HOME TIME ZONE London, Casablanca MENU Back Set Display map of world time zones. TIME ZONE menu displayed. † † To turn daylight saving time on or off, press multi selector down to highlight DaylightSaving and press center of multi selector. When DaylightSaving is checked, time will automatically be advanced one hour (Q 85). To return to Step 4, press multi selector up to highlight current time zone. The Clock Battery When the main batteries are installed or the camera is powered by an AC adapter, the clock battery will charge in about ten hours. When fully charged, the clock battery can provide several days of back-up power. 14 Basic Setup 6 7 HOME TIME ZONE DATE D 01 London, Casablanca MENU Back Set Select home time zone. 8 9 05 M 2004 00 00 05 00 Y 08 2004 13 00 M 08 2004 00 00 DATE M 08 Highlight D M Y. Y D Y 05 2004 13 00 First Steps 05 00 Select Month. Repeat steps 8–9 to edit Month, Year, hour, and minute. 11 DATE M 2004 D Edit Day (order of Day, Month, and Year may differ in some areas). D 01 DATE Y 01 10 Y Display DATE menu. DATE D M Choose order in which Day, Month, and Year will be displayed. 12 Exit to mode currently selected with mode dial. Note that time and date of recording will not be imprinted on pictures unless Date or Date and time is selected for Date imprint (Q 87). AUTO 19 Setting the Clock from Nikon View (Windows XP/Mac OS X Only) If the camera is connected with the USB option set to PTP (Q 45), Nikon View (included) can be used to set the camera clock to the same time and date as the computer. See the Nikon View Reference Manual for details. 15 Basic Photography Step 1 - Select P Mode This section details the basic steps involved in taking pictures in P (auto) mode. In this automatic, "point-and-shoot" mode, the majority of camera settings are controlled by the camera in response to shooting conditions, producing optimal results in most situations. 1 Rotate the mode dial to P 2 Turn the camera on • The power-on lamp will light and the monitor will display a welcome screen (Q 83). The camera is ready to shoot when the monitor shows the view through the camera lens. Memory/memory card Shooting mode/scene mode P indicates auto mode. When the camera contains a memory card, / is displayed, and when there is no card in the camera, } is displayed. Image mode Choose from five (E3200) or four (E2200) options depending on how you plan to use the picture (Q 63). The default setting is b (E3200) or c (E2200). Basic Photography AUTO 19 Flash mode Choose from five modes depending on lighting and your creative intent (Q 24). The default setting is !# (auto). 16 Number of exposures remaining The number of pictures that can be stored depends on the capacity of the memory or memory card and the option chosen for Image mode (Q 63). Step 1 - Select P Mode Number of Exposures Remaining If the number of exposures remaining is zero, the message "OUT OF MEMORY" will be displayed in the monitor. No further pictures can be taken until you: • choose a lower Image mode setting (Q 63) • insert a new memory card (Q 10) • delete some pictures (Q 22-23, 73-74) Basic Photography 17 Step 2 - Frame the Picture 1 Ready the camera Hold the camera steadily in both hands. Photographs can be framed in the monitor or the viewfinder. Don't Block the Shot To avoid dark or partially obscured pictures, keep your fingers and other objects away from the lens, flash window and microphone (E3200 only). 2 Zoom out Zoom in AUTO 19 Indicator in monitor shows amount of zoom when either button is pressed Basic Photography AUTO Digital zoom 18 19 Frame your subject Your Nikon digital camera is equipped with two types of built-in zoom: optical zoom, in which the camera's telescoping lens can be used to magnify the subject up to 3 ×, and digital zoom, in which digital processing is used to further magnify the image up to 4 ×, for a total of 12 ×. Use the zoom buttons to frame your subject in the center of the monitor: • Press the l (W) button to zoom out from your subject, increasing the area visible in the frame. • Press the O (T) button to zoom in on your subject so that it fills a larger area of the frame. • When the camera is zoomed in to maximum magnification, holding the O (T) button down for about one second will trigger digital zoom. The zoom indicator will turn yellow, and the green (AF) lamp next to the viewfinder will blink. Use the O (T) and l (W) buttons to adjust zoom in the digital zoom range. To cancel digital zoom, press l (W) until the zoom indicator turns white. Step 2 - Frame the Picture Digital Zoom In digital zoom, data from the camera's image sensor are processed digitally, enlarging the center portion of the picture to fill the frame. Unlike optical zoom, digital zoom does not increase the amount of detail visible in the picture. Instead, details visible at maximum optical zoom are simply enlarged, producing a slightly "grainy" image. Note that the effects of digital zoom are not visible in the viewfinder - use the monitor when framing pictures with digital zoom. Digital zoom is not available when the monitor is off or when Multi-Shot 16 is selected in the CONTINUOUS menu (Q 68). When Lighting Is Poor When lighting is poor, sensitivity is raised to compensate and the image in the monitor may be slightly mottled. This is normal and does not indicate a malfunction. Monitor or Viewfinder? Use the monitor to confirm camera settings at a glance while at the same time viewing an image that shows how the final picture will appear. This is particularly useful when the image in the viewfinder does not accurately reflect what will appear in the final picture, for example when: • your subject is less than a meter (3´3”) from the camera • digital zoom is in effect Use the viewfinder when you want to save power by turning the monitor off (Q 5), or when bright ambient lighting makes it difficult to see the display in the monitor. Basic Photography 19 Step 3 - Focus and Shoot 1 Focus Press the shutter-release button halfway to set focus and exposure. In P mode, the camera will automatically focus on the subject at the center of the frame. Focus and exposure will lock while the shutter-release button is pressed halfway. With the shutter-release button pressed halfway, check focus and flash. Focus is indicated by the green AF (autofocus) lamp next to the viewfinder and by the focus indicator in the monitor. Flash status is indicated by the red ! (flash-ready) lamp next to the viewfinder. Red (!) lamp Green (AF) lamp Focus indicator Red (!) lamp Green(AF)lamp/ focus indicator AUTO 19 On Flash will fire when picture is taken. Blinks Flash charging. Wait until lamp comes on. Off Flash off or not required. On Subject in focus. Camera unable to focus on subject at center of frame. Using Flashes focus lock, focus on another subject at same distance, then recompose picture and shoot. Monitor turns off while flash is charging. Basic Photography 2 Take the picture Press the shutter release button the rest of the way down to take the picture. The shutter sound is played when the shutter-release button is pressed (default setting Q 90). To prevent blur, press the shutter-release button down smoothly. You can choose whether or not to display the camera shake warning. (Q 25). 20 Step 3 - Focus and Shoot During Recording While pictures are being recorded to the memory or memory card, the green (AF) lamp blinks, and the < icon lights or the memory icon }// blinks. You can continue to take pictures until the < icon is displayed. Do not turn the camera off, eject the memory card, or remove or disconnect the power source while picture are being recorded. Cutting power or removing the memory card in these circumstances could result in loss of data or in damage to the camera or card. Getting Good Results with Autofocus Autofocus performs best when there is contrast between the subject and the background and the subject is evenly lit. It does not perform well if the subject is very dark or moving rapidly, if there are objects of sharply differing brightness in the scene (e.g., the sun is behind your subject and their features are in deep shadow), or if there are several objects at different distances from the camera at the center of the frame (e.g., your subject is inside a cage). Focusing on Off-Center Subjects: Focus Lock If your subject is not at the center of the frame when the shutter-release button is pressed halfway, your picture may be out of focus. To focus on an off-center subject: n AUTO 19 o p AUTO 10 19 q 21 Basic Photography NORMAL Focus Position the subject in the center of the frame and press the shutter-release button halfway. Check the green (AF) lamp and focus indicator With the shutter-release button pressed halfway, check that the green (AF) lamp and focus indicator glow steadily, indicating that the subject is in focus. Focus and exposure will remain locked while the shutter-release button is pressed halfway. Recompose the picture Keeping the shutter-release button pressed halfway, recompose your picture. Do not change the distance between the camera and your subject while focus lock is in effect. If your subject moves, remove your finger from the shutter-release button and focus again at the new distance. Take the picture Press the shutter-release button the rest of the way down to shoot. Step 4 - View the Results (Full-screen Playback Mode) 100NIKON 0001.JPG 2004.08.05 13:00 1 1 1 Press the x button 2 View pictures in the monitor To view additional pictures, press the multi selector down or right to view pictures in the order recorded, up or left to view pictures in reverse order. To scroll quickly to a particular frame number without viewing the intervening pictures, press and hold the multi selector. . @ (voice memo recording guide) is displayed (E3200 only). To cancel full-screen playback and return to shooting mode, press the x button again. Erase 1 image ? No Yes Basic Photography Done 22 Deleting Unwanted Pictures To delete the picture displayed in the monitor, press the u button. A confirmation dialog will be displayed. Press the multi selector up or down to highlight Yes and then press the center of the multi selector. To exit without deleting the picture, highlight No and press the center of the multi selector. Step 4 - View the Results (Full-screen Playback Mode) Deleting Your Last Shot At any time during shooting, you can press the u button to delete the last picture taken. The confirmation dialog shown at right will be displayed. Delete the picture as described opposite under "Deleting Unwanted Pictures." Erase 1 image ? No Yes Playback Tip The first and last pictures in memory are linked. Pressing the multi selector up or left when the first picture in memory is displayed will take you to the last picture. Pressing the multi selector down or right when the last picture is displayed takes you to the first picture. Image File and Folder Names In the memory or on the memory card, pictures are identified by file names with three parts: a four letter identifier, a four-digit file number assigned automatically by the camera in ascending order, and a three-letter extension (e.g., "DSCN0001.JPG") Picture type Original Copy Voice memo appended to still picture (E3200 only) Q Identifier Extension Still picture DSCN .JPG 22 Movie DSCN .MOV 60 Small copy SSCN .JPG 78 Cropped copy RSCN .JPG 42 Voice memo DSCN SSCN RSCN .WAV 43 When a picture is viewed in the monitor, the file number and extension appear in the top right corner of the display. The identifier is not displayed, but is visible when the picture is transferred to a computer. 23 Basic Photography Pictures are stored in folders created automatically by the camera and named with a three-digit folder number followed by "NIKON" (e.g., "100NIKON"). Folders can hold up to 200 pictures; if you take a picture when the current folder contains 200 pictures, a new folder will be created by adding one to the current folder number. If you take a picture when the current folder contains a picture numbered 9999, a new folder will be created and file numbering will begin again from 0001. If the number of files reaches 200 or file numbering reaches 9999 when the memory or memory card contains a folder numbered 999, no further pictures can be taken until the memory or memory card has been formatted (Q 93) or a new memory card inserted. More on Photography When Lighting Is Poor: Using the Flash The following flash modes are available: More on Photography Mode # Auto How it works When to use it Flash fires when lighting is Best choice in most situations. poor. % Auto with red-eye reduction Use for portraits (works best when subRed-eye reduction lamp ject is well within range of flash and (E3200) or flash (E2200) looking at pre-flash). Not recommended fires before main flash, when quick shutter response is reducing "red-eye." required. $ Flash Cancel (off) Use to capture natural lighting under Flash will not fire even dim light or where use of flash is prohibwhen lighting is poor. ited. If 2 (camera shake) icon appears, care should be taken to avoid blurring. ! Anytime Flash ( fill flash) Flash fires whenever picture Use to "fill-in" (illuminate) shadows and is taken. back-lit subjects. k (Slow sync) Use to capture both subject and backAuto flash combined with ground at night or under dim light. If slow shutter speeds. 2 (camera shake) icon appears, care should be taken to avoid blurring. To select the flash mode: 1 2 AUTO 19 Display flash-mode menu. 3 Exit menu. Flash mode shown by icon at bottom of monitor. 19 24 19 Highlight desired mode (to exit without changing mode, wait two seconds or press multi selector to left). When Lighting Is Poor: Using the Flash Sensitivity ( ISO Equivalency) 19 The 2 (Camera Shake) Icon When lighting is poor and the flash is off ($), shutter speeds will slow and pictures may be blurred. If the shutter speed required for exposure is very slow, a 2 (camera shake) warning will appear in the monitor. Use of a tripod or support is recommended. 19 Flash Range Flash range varies with zoom position. When the camera is zoomed all the way out, the flash has a range of 0.4 - 3.4 m (1´4” - 11´2”) with E3200 and 0.4 - 3.7 m (1´4” - 12´2”) with E2200. The range at maximum zoom is 0.4 - 2.0 m (1´4” - 6´6”) with E3200 and E2200. Close-Ups The flash may not be able to light the entire subject at distances of less than 40 cm (1´4”). When taking close-ups, play each picture back after shooting to check the results. Flash Mode Selection In P (auto) mode, the camera "remembers" the current flash mode setting even when the camera is turned off. The most recent setting will automatically be restored whenever the mode dial is set to P unless the Reset all option in the setup menu is used to restore the default setting (Q 94). Depending on the mode selected, the flash mode may change automatically when you choose a new shooting mode (Q 28-39). The AF-Assist Illuminator (E3200 only) The E3200 is equipped with an AF-assist illuminator. If lighting is poor, the built-in AF-assist illuminator will light when the shutter-release button is pressed halfway, allowing the camera to focus even when the subject is poorly lit. When the camera is zoomed all the way out, the AF-assist illuminator has a range of 0.4 – 2.0m (1’4” – 6’7”). The range at maximum zoom is 0.4 – 1.4m (1’4” – 4’6”). In scene mode (Q 28-39), the AF-assist illuminator is only available in i (Portrait), m (Night Portrait) and B (Party/Indoor) modes without the framing assist option (Q 29-33), and in C (Beach/Snow), D (Sunset), I (Copy), J (Back light) and K (Panorama assist) modes. 25 More on Photography "Sensitivity" is a measure of how quickly the camera responds to light. Your Nikon digital camera normally has a sensitivity roughly equivalent to film with an ISO 50 rating. When lighting is poor and the flash is off ($), the camera will automatically increase sensitivity, permitting faster exposures and minimizing blur caused by inadvertent camera movement (camera shake). An ISO icon will appear in the monitor to warn that the picture may be slightly mottled. Taking a Self-Portrait: Using the Self-Timer More on Photography When the self-timer is on, pictures are taken ten seconds after the shutter-release button is pressed. This can be used to allow you to appear in your own pictures or to prevent close-up or low-light shots from being blurred by the camera movement that occurs when the shutter-release button is pressed.When using this option, you should either mount the camera on a tripod (recommended) or rest it on a flat, level surface. 1 2 OFF ON AUTO 19 AUTO 19 Highlight YON (to exit without changing mode, wait two seconds or press multi selector to left). Display self-timer menu. 3 4 AUTO AUTO 19 Exit menu. Self-timer icon is displayed in monitor. 19 Frame picture and start timer. Countdown timer shows number of seconds remaining until picture is taken. Focus and exposure lock when the shutter-release button is pressed. The self-timer lamp on the front of the camera will blink until one second before the picture is taken, staying lit during the final second to warn that the shutter is about to be released. Stopping the Self-Timer To stop the timer before the picture is taken, press the shutter-release button. The Self-Timer The self-timer is not available in some shooting modes (Q 28-39). 26 OFF ON Easy Close-ups: Macro Close-up Mode 1 2 OFF ON OFF ON ON AUTO 19 AUTO 19 Highlight &ON (to exit without changing setting, wait two seconds or press multi selector to left). Display macro close-up menu. 3 4 AUTO 19 Exit menu. & icon appears in monitor when camera is in macro close-up. AUTO 19 Frame picture. If camera is zoomed out until & icon turns green, camera can focus at distance of 4 cm/1.6″. Macro Close-up Mode At short ranges, the viewfinder does not show the image that will appear in the final picture. Use the monitor for close-ups. In macro close-up mode, the camera focuses continuously, even when the shutter-release button is not pressed halfway. Macro close-up is not available in some shooting modes (Q 28-39). 27 More on Photography Macro close-up mode is used for taking close-up shots of small objects at very short distances (minimum 4 cm/1.6″). Assist and Scene Modes More on Photography Your Nikon digital camera offers a choice of four "assist" and eleven "scene" modes. In these modes, camera settings are automatically optimized for the selected subject type, sparing you the necessity of adjusting settings one-by-one. Assist Modes Assist modes are chosen by rotating the mode dial to the desired mode. Framing assist options are available to help you compose your shots. Description Q Use for portraits in which the main subject stands out clearly while background details are softened. Use to enhance outlines, colors, and contrast in skyscapes, forests, and other landscape shots, or to take portraits that feature a landmark in the background. 30 Use for sports shots that freeze motion in rapidly-moving subjects. 32 33 Mode i Portrait assist N Landscape assist j Sports assist m Night portrait assist Use for portraits taken against a dimly-lit backdrop. 31 Scene Modes Scene modes are selected by rotating the mode dial to e and selecting the desired scene from a menu. Description Q Use to capture background details or the effects of candlelight and other indoor lighting. Use for bright subjects such as snowfields, beaches, and sunlit expanses of water. 35 Sunset Use to preserve the deep hues seen in sunsets and sunrises. 35 E Dusk/Dawn Use to preserve the colors seen in the weak natural light before sunrise and after sunset. 35 F Night landscape Use when taking landscape shots at night. 36 A Close up Use to capture vivid colors in close-up shots of flowers, insects, and other small objects. 36 G H I Museum Fireworks show Copy Use where flash photography is prohibited. 36 37 37 J Back light K Panorama assist Mode B Party/Indoor C Beach/Snow D Use to capture the expanding burst of light from a firework. Use to copy text and line drawings. Use when light is coming from behind your subject, throwing their features into shadow. Use when taking a series of pictures that will later be joined to form a single scene. 35 37 38 Assist and Scene Modes Depending on your subject, assist and scene modes may not always produce the desired results. If results are not to your satisfaction, choose P (auto) and try again. 28 Framing Assist 1 2 Portrait Portrait Portrait close-up MENU Exit Set After selecting mode, display framing assist menu. Choose composition type. Current selection shown by large icon and caption. 3 4 Set MENU Exit 19 Make selection. To return to shooting mode, press the MENU button. Framing guide appears in monitor. 19 When taking pictures, position subject or subjects in framing guide as described on following pages. Using the Guides Your subject does not have to fit exactly in the framing guides. When framing pictures, pay attention to your surroundings; be careful not to trip and fall. Image Mode The image mode option is available in the assist mode menu (Q 63). IMAGE MODE MENU Exit Set 29 More on Photography The four assist modes offer a selection of framing assist options that allow you to compose pictures with the help of framing guides displayed in the monitor. To use framing assist, rotate the mode dial to the desired mode and follow the steps below. Framing Assist i Portrait Assist More on Photography i (portrait assist) mode helps you frame portraits in which the main subject stands out clearly while background details are softened, lending the composition a sense of depth (the degree of softening depends on the amount of light available). A framing assist menu helps you frame off-center subjects and compose tall or wide shots and two-person portraits. i Portrait Portrait No guides are displayed in monitor. Camera focuses on subject in center of frame; focus lock can be used to focus on off-center subjects. Set MENU Exit Portrait Portrait left Set MENU Exit Portrait Portrait right Set MENU Exit Portrait Portrait close-up Set MENU Exit Portrait Portrait couple Set MENU Exit Portrait Portrait figure MENU Exit ! Set 9 Portrait left Use to compose shot with subject centered in left half of frame. Camera will focus on subject in framing guide. 0 Portrait right Use to compose shot with subject centered in right half of frame. Camera will focus on subject in framing guide. : Portrait close-up Use to compose shot with your subject's face positioned in top half of frame. Camera will focus on face area in framing guide. [ Portrait couple Use to compose shot with two subjects positioned side-by-side. Camera will focus on closest subject. ; Portrait figure Use to compose shot with camera held as shown at right and subject's face in top half of frame. Camera will focus on face area in framing guide. %* * Other modes can be selected. 30 Y OFF* & OFF Framing Assist NLandscape Assist Landscape MENU Exit Set Landscape Scenic view MENU Exit Set Landscape Architecture MENU Exit Set ! Group right Set Landscape Group left MENU Exit ! No guides are displayed in monitor. Use to focus on distant objects through foreground objects such as windows or a screen of branches. Focus is fixed at infinity. 6 Scenic view Use to compose landscapes with sky in top third of frame, distant objects in middle third, and closer objects in bottom third. Match top of skyline with wavy yellow guide. 7 Architecture Use to photograph buildings. A grid is displayed in the monitor to help keep verticals and horizontals aligned with the frame. $ Landscape MENU Exit N Landscape Set Y OFF* & OFF 5 Group right Use to compose portraits with portrait subjects to right and landmark or other object in background at left of frame. Both portrait subject and background object will be in focus. 8 Group left Use to compose portraits with portrait subjects to left and landmark or other object in background at right of frame. Both portrait subject and background object will be in focus. #* Y OFF* & OFF * Other modes can be selected. 31 More on Photography N (landscape assist) mode helps you frame vivid landscape shots that enhance outlines, colors, and contrast. A framing assist menu helps you frame not only natural landscapes but also cityscapes and portrait shots featuring a landmark in the background. Framing Assist j Sports Assist More on Photography j (sports assist) mode is used for dynamic action shots that capture moving objects. The assist menu lets you freeze the action in a single shot or record motion in a series of pictures. j Sports Sports Set MENU Exit Sports Sport spectator Set MENU Exit While shutter-release button is held down, pictures are recorded at rate of about 3 frames every 2 seconds (rate of shooting will slow when < icon is displayed). With E3200, camera records 3 shots when image mode is set to b Normal (2048), and with E2200, 6 shots when image mode is set to c (1600). Focus, exposure, and white balance are determined by first shot in each series. Camera focuses continuously, even when shutter-release button is not pressed. \ Sport spectator Sport spectator is ideal for capturing those instants when you have no time to compose the picture. Use at ranges of 3 m to infinity. A series of shots can be taken by holding the shutter-release button down. Number of shots that can be taken is the same as for j (Sports) mode. ] Sports Sport composite MENU Exit ! Set Sport composite Each time shutter-release button is pressed, camera takes 16 shots in about two seconds and arranges them in four rows to form a single picture. Focus, exposure, and white balance are determined by first shot in each series. $ Y OFF & OFF Sports Assist In Sports or Sports composite mode, the focus is constantly reset until it is locked by pressing the shutter-release button halfway. 32 Framing Assist m Night Portrait Assist ! % Y OFF* & More on Photography m (night portrait assist) mode is used for taking portrait shots at night, when it provides a natural balance between the main subject and the background. Pictures taken at slow shutter speeds are adjusted to improve quality, slightly increasing processing time; to prevent blurring, mount the camera on a tripod or rest it on a flat, stable surface. For more information on framing assist options, see i Portrait Assist (Q 30). OFF * Other modes can be selected. Flash Mode Selection in m Mode Flash mode is automatically set to % (auto with red-eye reduction). 33 e Scene Mode More on Photography e (scene) mode offers a menu of eleven "scenes," each corresponding to a common situation, such as a backlit subject, sunset, or interior shot. Camera settings are automatically adjusted to suit the selected scene, sparing you the necessity of adjusting each setting separately. To take pictures in scene mode, rotate the mode dial to e and follow the steps below. Scene mode 1 Beach/Snow Party/Indoor MENU Exit Set Display scene menu. 3 Set MENU Exit Choose scene. Current selection shown by large icon and caption. Beach/Snow MENU Exit 2 4 AUTO Set Make selection. To return to shooting mode, press ^. Selected scene shown by icon at top left corner of monitor. 19 Take pictures. Image Mode Image mode can be selected in the scene menu. The current setting is shown when the image mode icon is highlighted. The 2 (Camera Shake) Icon IMAGE MODE MENU Exit Set When the 2 icon appears in the monitor, pictures may be blurred. In this section, the precautions that you can take to avoid blur are indicated by stars: hold camera in both hands and brace elbows against your body. use a tripod or rest the camera on a flat, level surface. 34 e Scene Mode The following scenes are available: Use for shots that include details of the background, or to capture the effects of candlelight and other indoor background lighting. ! %* Y OFF* & OFF CBeach/Snow Vividly captures the brightness of such subjects as snowfields, beaches, or sunlit expanses of water. Flash mode automatically set to AUTO; other modes can be selected. ! Y Auto* OFF* & OFF DSunset Preserves the deep hues seen in sunsets and sunrises. ! $* Y OFF* & OFF EDusk/Dawn Preserves the colors seen in the weak natural light before sunrise or after sunset. Pictures taken at slow shutter speeds are processed to improve quality, slightly increasing time before pictures are saved to memory or memory card. ! $ Y OFF* & OFF * Other modes can be selected. 35 More on Photography BParty/Indoor e Scene Mode FNight landscape More on Photography A slow shutter speed is used to produce stunning night landscapes. Focus is fixed at infinity. Pictures taken at slow shutter speeds are processed to improve quality, slightly increasing time before pictures are saved to memory or memory card. ! $ Y OFF* & OFF AClose up Use to capture vivid colors in close-up shots of flowers, insects, and other small objects, with the background artistically blurred. Flash mode automatically set to AUTO; other modes can be selected. Camera focuses continuously, even when shutter-release button is not pressed halfway. Minimum focus distance varies with zoom position. To focus on objects as close as 4 cm/1.6” to the lens, adjust zoom until the macro close-up icon (&) in monitor turns green. ! Y Auto* OFF* & ON GMuseum Flash turns off ($) automatically. Use this mode indoors where flash photography is prohibited (for example, in museums and art galleries) or in other indoor settings in which you do not want to use the flash. •The Best Shot Selector (BSS;Q 65) turns on automatically, reducing the effects of inadvertent camera movement. •Macro close-up turns off automatically; other modes can be selected. •Photography may be prohibited altogether in some settings. Be sure to obtain permission first. ! $ * Other modes can be selected. 36 Y OFF* & OFF* e Scene Mode HFireworks show • Focus is fixed at infinity. • Follow the firework as it ascends and press the shutter-release button all the way down at the start of the burst. ! $ Y OFF & OFF ICopy Provides clear pictures of text or drawings on a white board or in printed matter such as a business card. • Flash and macro close-up turn off automatically; other modes can be selected. • Colored text and drawings may not show up well in the final picture. ! $* Y OFF & OFF JBack light Use when light is coming from behind your subject, throwing their features into shadow, or when your subject is in the shade but the background is brightly lit. The flash will fire automatically to "fill in" (illuminate) shadows. ! ! Y OFF* & OFF * Other modes can be selected. 37 More on Photography Slow shutter speeds are used to capture the expanding burst of light from a firework. The camera responds more rapidly to the shutter-release button, ensuring that you can capture the start of the burst. e Scene Mode KPanorama Assist More on Photography Use to take a series of photographs that you will later join to form a single scene (for example, a panorama or 360º virtual-reality image). ! $* Y OFF & OFF* * Other modes can be selected. To use panorama assist, follow the steps below. 1 Panorama assist MENU Exit Set Highlight K (Panorama Assist), and press the center of the multi selector. 3 2 19 Pan direction displayed in yellow. Select how pictures will be joined together in completed panorama. This is the direction in which to pan the camera after each shot. Bottom to top Left to right Right to left 19 Top to bottom Joining Panorama Pictures Transfer the pictures taken with Panorama Assist to your computer (Q 45) and use the Panorama Maker function in Nikon View to join them into a single scene. For further information, see the Nikon View Reference Manual (on CD-ROM). 38 e Scene Mode 19 5 Take first picture. About one third of picture is shown superimposed on view through lens (if pan direction is left to right, picture will appear on left side of monitor). AE-L 18 6 7 AE-L 18 Compose the next shot to overlap with the previous picture. 8 Take the next picture. Repeat steps 6 and 7 until all shots in series have been taken. End series. Shooting will also end if a new mode is selected or camera enters standby mode. Panorama Assist The pan direction, flash mode, macro close-up mode, and exposure compensation can not be changed after the first picture is taken. To change the pan direction, press the ^ button to end shooting and repeat steps 1–3. Using a Tripod Using a tripod makes it easier to compose shots so that they overlap. Storage Locations for Panoramas Each series of pictures taken at Panorama assist is stored in a separate folder with a name consisting of "P_" preceded by a three-digit folder number and followed by a three-digit sequence number (e.g., "101P_002"). 39 More on Photography Make selection (to change selected pan direction, press center of multi selector and repeat steps 3–4). Pan direction displayed in white. 4 More on Playback Viewing Pictures on the Camera Viewing Multiple Pictures: Thumbnail Playback Pressing the l (W) button in full-screen playback displays the pictures in the memory or on the memory card in "contact sheets" of four thumbnail images. The following operations can be performed while thumbnails are displayed: To Press 1 2 3 4 Description More on Playback Press multi selector up, down, left or right to highlight pictures. Press center of multi selector to return to fullscreen playback. Highlight pictures Change number of pictures displayed With four thumbnails displayed, press l (W) button once to view nine thumbnails. Press O (T) to "zoom in" l (W)/O (T) from nine thumbnails to four-thumbnail view, or, when four thumbnails are displayed, to return to full-screen playback. Cancel thumbnail playback Cancel thumbnail playback and return to full-screen playback. Delete highlighted picture 40 u Confirmation dialog will be displayed. Press multi selector up or down to highlight option, press the center of the multi selector to select. Erase 1 image ? No Yes Viewing Pictures on the Camera Taking a Closer Look: Playback Zoom Use the O (T) button to zoom in on still images displayed in full-screen playback. While the picture is zoomed in, you can save a cropped copy of the picture that contains only the portion of the image visible in the monitor. Playback zoom and cropping are not available when the current picture is a movie or a copy created using the small picture option (Q 60, 78). Cropped copies can not be further cropped. To Zoom Press Description O (T) Zoom increases each time button is pressed, to a maximum of 10×. While image is zoomed in, O icon and zoom ratio are displayed in top left corner of monitor. View other areas of picture Zoom out Scroll Use multi selector to scroll to areas of picture not visible in monitor. To use multi selector to view other pictures, cancel zoom. l (W) Zoom decreases each time l (W) button is pressed. To cancel zoom, zoom picture out until entire picture is displayed. Cancel zoom Cancel zoom and return to full-screen playback. Crop picture Only portion of picture visible in monitor can be cropped. Delete picture u Confirmation dialog will be displayed. Press multi selector up or down to highlight option, press the center of the multi selector to select. Erase 1 image ? No Yes 41 More on Playback Zoom in X4.0 Cropping Pictures This option lets you crop part of a picture and save it as a separate file. 1 2 X4.0 Scroll Zoom Zoom picture in and out. More on Playback 3 Save this image as displayed? X4.0 Scroll Zoom Scroll picture. Repeat steps 1 and 2 until desired portion of image is displayed in monitor. To view the new, cropped copy, press the multi selector down until the copy is displayed. No Yes Confirmation dialog displayed. Select Yes to create cropped copy, No to exit without creating copy, then press the center of the multi selector. Cropped pictures are stored as JPEG files (compression ratio 1 : 8). Depending on the size of the original and the zoom ratio at the time the copy was created, copies will be 2,048 × 1,536 (E3200 only), 1,600 × 1,200, 1,280 × 960, 1,024 × 768, 640 × 480, 320 × 240, or 160 × 120 pixels in size. Copies are stored in separate files in the memory or on the memory card with names of the form "RSCNnnnn.JPG," where "nnnn" is a four-digit number assigned automatically by the camera. Photo Trim • Cropped pictures are stored with the same recording date and time as the original. • Resized copies and cropped copies can not be cropped. • If a cropped copy created using the E3200 or E2200 is viewed on a different digital camera, the picture may not be displayed or it may not be possible to transfer it to a computer. 42 Voice Memos: Recording and Playback (E3200 only) Using the camera’s microphone, you can record a voice memo by pressing the shutter-release button while a picture with the . @ icon is displayed in fullscreen playback (Q 22). Do not touch the microphone during recording. Voice memos cannot be recorded or played back for movies (Q 56) or during thumbnail playback (Q 40) or playback zoom (Q 41). If a voice memo already exists for the current picture, [1] (voice memo icon) and . [1] (voice memo playback guide) are displayed and a new voice memo can not be recorded. Press 1 1 Description Record voice memo If . @ icon is displayed on current picture, memo will be recorded while shutter-release button is held down. During recording, zREC icon blinks. Recording ends after about 20s or when shutter-release button is released. Do not touch microphone during recording. Play voice memo Pictures for which voice memo exists are marked by 1 icon. Press shutter-release button to play voice memo. Playback ends when voice memo ends or shutter-release button is pressed again. Change volume l (W)/ O (T) Delete picture or voice memo u Zoom buttons control volume during playback. Press l (W) to lower volume, O (T) to increase. Volume can also be adjusted using Sound settings option in setup menu (Q 90). Confirmation dialog will be displayed. Press multi selector up or down to highlight option, press the center of the multi selector to select. • Select No to exit without deleting picture or voice memo. • Select [1] to delete voice memo only. • Select Yes to delete both picture and voice memo. Erase 1 image ? No Yes Voice Memos Voice memo file names consist of an identifier ("DSCN" for memos appended to original pictures, "SND_" for memos appended to copies), a four-digit file number copied from the associated picture, and the extension ".WAV" (e.g., "DSCN0015.WAV"). 43 More on Playback To 100NIKON 0001.JPG 2004.08.05 13:00 Viewing Pictures on TV Using the EG-CP12 audio/video (AV) cable (E3200) or EG-CP11 video cable (E2200) included with your camera, you can connect the camera to a television or video-cassette recorder (VCR). Choosing a Video Mode The Video mode item in the camera setup menu offers a choice of NTSC and PAL standards (Q 94). Be sure that the standard selected matches that used in the device. More on Playback 1 Turn the camera off 2 Connect the AV/video cable to the camera • Turn the camera off before connecting or disconnecting the AV/video cable. • Open the interface connector cover and insert the black plug into the camera's interface connector. 3 Connect the AV/video cable to the television or VCR • [E3200] Insert the yellow plug on the AV cable into the video-in jack on the television or VCR and the white plug into the audio-in jack. • [E2200] Insert the yellow plug on the video cable into the video-in jack on the television or VCR. 4 44 Turn the camera on • Press the x button for about a second to turn the camera on. The camera monitor will remain off and the television will display the image normally shown in the monitor. If the camera is connected to a VCR, images can be recorded to video tape. Viewing Pictures on a Computer Using the UC-E6 USB cable and Nikon View software provided with your camera, you can view your photographs and movies on a computer. Before you can transfer (copy) pictures to your computer, you will need to install Nikon View. For more information on installing Nikon View and transferring pictures to your computer, see the Quick Start Guide and the Nikon View Reference Manual. Before Connecting the Camera SET-UP SET-UP 1/5 Welcome screen Language Date USB Monitor settings Video mode USB 4/5 PTP Mass Storage Pictures transferred using: Operating system Windows XP Home Edition Windows XP Professional Camera a (V) button* Choose Mass Storage or PTP. Mac OS X 10.1.3 or later Choose PTP. Mac OS X 10.1.2 - Windows 2000 Professional Windows Millennium Edition (Me) Windows 98 Second Edition (SE) Mac OS 9 (9.0 - 9.2) Nikon View button Choose Mass Storage or PTP. Choose Mass Storage. * The camera a (V) button can not be used to transfer pictures in the following cases. Use the Nikon View button. • When your computer's operating system is Mac OS X 10.1.2 • When Mass Storage is selected for the USB option when transferring pictures from the camera memory • When the memory card write-protect switch is in the "lock" position. Unlock by sliding the switch to the "write" position before transferring pictures. 45 More on Playback Pictures can be copied from the camera to the computer by: • Pressing the a (V) button on the camera (Q 76) • Clicking the button in Nikon View Which method you will use depends on your computer's operating system and the USB option selected in the camera setup menu. After consulting the following table, select the appropriate option using the USB item in the camera setup menu. The default option is Mass Storage. Viewing Pictures on a Computer Connecting the USB Cable Turn the computer on and wait for it to start up. After confirming that the camera is off, connect the UC-E6 USB cable as shown below. Connect the camera directly to the computer; do not connect the cable via a USB hub or keyboard. More on Playback UC-E6 USB cable You can now turn the camera on and transfer pictures as described in the Quick Start Guide. Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE), Mac OS 9 (9.0-9.2) Do NOT select PTP when connecting the camera to a computer running one of the above operating systems. If you have connected the camera to a computer running one of the above operating systems with PTP selected in the USB menu, disconnect the camera as described below. Be sure to select Mass Storage before reconnecting the camera. Windows 2000 Professional A dialog will be displayed welcoming you to the Found New Hardware Wizard. Click Cancel to close the dialog, and then disconnect the camera. Windows Millennium Edition (Me) After displaying a message stating that the hardware information database is being updated, the computer will start the Add New Hardware Wizard. Click Cancel to exit the wizard, and then disconnect the camera. Windows 98 Second Edition (SE) The Add New Hardware Wizard will be displayed. Click Cancel to exit the wizard, and then disconnect the camera. Mac OS 9 (9.0 - 9.2) A dialog will be displayed stating that the computer is unable to use the driver needed for the "Nikon Digital Camera E3200_PTP" (E3200) or "Nikon Digital Camera E2200_PTP" (E2200) USB device. Click Cancel to close the dialog, and then disconnect the camera. 46 Viewing Pictures on a Computer Disconnecting the Camera If PTP is selected in the USB menu, you can turn the camera off and disconnect the USB cable once transfer is complete. If you have not changed the USB option in the camera setup menu from its default setting of Mass Storage, you must remove the camera from the system as shown below before turning the camera off or disconnecting the cable. Windows XP Home Edition/Windows XP Professional Click the "Safely Remove Hardware" icon ( ) in the taskbar and select Safely remove USB Mass Storage Device from the menu that appears. Windows Millennium Edition (Me) Click the "Unplug or Eject Hardware" icon ( ) in the taskbar and select Stop USB Disk from the menu that appears. Windows 98 Second Edition (SE) In My Computer, click with the right mouse button on the removable disk corresponding to the camera and select Eject from the menu that appears. Mac OS X Drag the "NO_NAME" camera volume into the Trash. Mac OS 9 Drag the "untitled" camera volume into the Trash. Mac OS X Mac OS 9 47 More on Playback Windows 2000 Professional Click the "Unplug or Eject Hardware" icon ( ) in the taskbar and select Stop USB Mass Storage Device from the menu that appears. Printing Pictures Pictures stored in the memory or on the memory card can be printed in the same way as pictures taken with a film camera. Using the Print set option in the playback menu, you can specify the pictures to be printed, the number of prints, and the information to be included with each print. Printing pictures More on Playback Pictures can be printed as follows. • By printer or at a photo lab Pictures can be printed by inserting a memory card containing pictures into a printer or having prints made at a digital photo lab. If a print order has been created, the printer or photo lab must support DPOF. Pictures stored in the camera memory can be printed. They must be copied to the memory card (Q 79). Copy the pictures before creating a print order. • By a printer that supports PictBridge (Q 52) Connect the camera to a printer that supports PictBridge to print pictures. Print order data can be used. • By transferring pictures to a PC and printing them For more information, see the Nikon View Reference Manual. 48 Printing Pictures 1 PLAYBACK MENU 1/3 2 PRINT SET Print set Print selected Slide show Delete print set Delete Highlight Print set. 3 Display PRINT SET menu. 4 PRINT SET 2004 08.05 12:00 Delete print set 5/ 5 MENU Back Highlight Print selected. 5 Set Pictures on memory card displayed as thumbnail images. PRINT SELECTION 6 PRINT SELECTION 1 2004 08.05 12:00 MENU Back Highlight picture. 4/ 5 Set 2004 08.05 12:00 1 MENU Back 4/ 5 Set Select highlighted picture. Selected pictures marked by d icon. "Delete print set" To cancel the current print order, highlight Delete print set in the PRINT SET menu and press the multi selector to the right. Print marking will be removed from all pictures in the current print order; the pictures themselves will not be deleted. 49 More on Playback Print selected PRINT SELECTION Printing Pictures 7 PRINT SELECTION 3 2 2004 08.05 12:00 2 4/ 5 MENU Back 8 Set PRINT SET Done More on Playback Date Info Done 50 1 Use multi selector to specify number of prints (up to 9). To deselect picture, press multi selector down until icon disappears. Repeat steps 5-7 to select additional pictures. To exit without altering print order, press ^ button. Press the center of the multi selector to complete print order and display menu of print options. • To print date of recording on all pictures in print order, highlight Date and press the center of the multi selector. Check will appear in box next to item. • To print shutter speed and aperture on all pictures in print order, highlight Info and press the center of the multi selector. Check will appear in box next to item. • To deselect checked item, highlight and press the center of the multi selector. • To complete print order and return to playback, highlight Done and press the center of the multi selector. Done is displayed and the screen returns to the playback menu. Press the Menu button to return to full-screen playback. To exit without altering print order, press ^ button. Printing Pictures Print Set If you display the PRINT SET menu after creating a print order, the Date and Info options will be reset. "Date" 2004.08.05 More on Playback If Date is selected, the date of recording will appear on pictures printed using DPOF. The date is based on the photo information recorded with the picture, and will not be correct if the camera clock was set incorrectly when the picture was taken (Q 14-15). The date will not be printed if the print system does not support the DPOF date function. The date stamp recorded when Date or Date and time is selected for Date imprint (Q 87) forms a permanent part of the image and will appear whenever the pictures are printed, even if the printer does not support the DPOF date function. Print set can not be used to print the time and date of recording on pictures recorded when Date or Date and time is selected for Date imprint. 51 Printing Via Direct USB Connection Your camera allows pictures to be printed directly from the camera using PictBridge. If the UC-E6 USB cable is used to connect the camera to a printer that supports PictBridge, pictures can be printed directly from the memory or memory card without having to be transferred to a computer. 1 USB PTP Select PTP in the camera USB menu. • For more information on selecting the USB option, see "Viewing Pictures on a Computer" (Q 45). Mass Storage More on Playback 2 After confirming that the camera is off, connect the UC-E6 USB cable as shown above. You can now turn the camera and printer on. 3 PictBridge PRINT Print Print selection DPOF printing Print all images Cancel Cancel Highlight Print. Option 4 Display options. Description Print selection Select picture and specify number of prints. Print all images All pictures in internal memory or on memory card are printed. DPOF printing 52 Pictures for which print order has been created are printed accordingly. Printing Via Direct USB Connection 5 6 PRINT PRINT SELECTION Print selection 2004 08.05 12:00 Print all images Cancel 5/ 5 Set MENU Back Highlight Print selection. * Display selection dialog. * To print one copy of all pictures on memory card, highlight Print all images and press multi selector to right. PRINT SELECTION 8 PRINT SELECTION 1 2004 08.05 12:00 2004 08.05 12:00 4/ 5 MENU Back Set 1 4/ 5 Set MENU Back Scroll through pictures. Current picture shown at bottom of display. Select current picture and set number of prints to 1. Selected pictures marked by d icon. 9 10 PRINT SELECTION 1 3 2004 08.05 12:00 3 MENU Back 1 CONFIRM 1 1 3 2 4/ 5 Set Use multi selector to specify number of prints (up to 9). To deselect picture, press multi selector down when number of prints is 1. Repeat steps 7–9 to select additional pictures. Exit View selected pictures. Press multi selector up, right, left, or down to view pictures not visible in display. 53 More on Playback 7 Printing Via Direct USB Connection 11 PRINT Printer ready? 007 prints Start print Confirm Cancel Printing 002/007 + Done YOU MAY TURN OFF THE CAMERA + Cancel Resume Display confirmation dialog. Press multi selector up or down to highlight option, press center to select. More on Playback • Select Start print to start printing. To interrupt printing, press center of multi selector, then turn camera off and disconnect USB cable. • Select Confirm to return to print selection dialog shown in Step 6. • Select Cancel to exit without printing pictures. • Select Resume to return to Step 3. Message shown above at right is displayed when printing is complete. Turn camera off and disconnect USB cable. To print the current print order: 1 PictBridge 2 Print Printer ready? 007 prints Start print Confirm Cancel DPOF printing Cancel Highlight DPOF printing. 3 DPOF PRINTING Printer ready? 007 prints Start print Confirm Cancel Highlight Confirm (to exit without printing pictures, highlight Cancel and press center of multi selector). 54 DPOF PRINTING Display options. 4 CONFIRM 1 1 3 2 Exit Display print order. Press multi selector up, right, left, or down to view pictures not visible in display. Printing Via Direct USB Connection 5 DPOF PRINTING Printer ready? 007 prints Start print Confirm Cancel Printing 002/007 + + Cancel Done YOU MAY TURN OFF THE CAMERA Resume Display confirmation dialog. Press multi selector up or down to highlight option, press center to select. Before Printing Before printing via direct USB connection, make sure that the printer supports PictBridge or USB Direct and check printer settings. See the printer manual for details. Use a Reliable Power Source When printing pictures via direct USB connection, be sure the battery is fully charged. If in doubt, recharge the battery before printing or use the optional EH-62B AC adapter. DPOF Printing The DPOF printing option is only available if a print order has been created. Error Messages If an error message is displayed, an error has occurred. After checking the printer and resolving any problems as directed in the printer manual, highlight Resume and press the center of the multi selector to resume printing. Select Cancel to exit without printing the remaining images. PRINTER ERROR CHECK PRINTER STATUS Resume Cancel PictBridge PictBridge is an industry standard for direct printing that ensures compatibility when different devices are connected. 55 More on Playback • Select Start print to start printing. To interrupt printing, press center of multi selector, then turn camera off and disconnect USB cable. • Select Cancel to exit without printing pictures. Message shown above at right is displayed when printing is complete. Turn camera off and disconnect USB cable. Movies W Recording Movies Movies can be recorded with sound recorded via the camera's built-in microphone, using the E3200, or silent movies using the E2200: 20s REC Movies 12s 1 Rotate the mode dial to W 2 Turn the camera on 3 Start recording The monitor shows the length of the movie that can be recorded. Press the shutter-release button all the way down to start recording. During recording, the zREC icon blinks and progress is shown by the indicator at the bottom of the monitor. • Recording will end automatically when no more memory is available in the memory or on the memory card. To select a movie mode: 2 1 MOVIE Movie options Auto-focus mode Select W Mode. 56 20s Display MOVIE menu. W Recording Movies The type of movie recorded can be selected from the following options: Length of movie *1 Type Description Memory card Memory 128 MB 256-512 MB TV movie (640) Movies are recorded at a rate of 15 frames per second. Vertical interlacing is used to Approx. Approx. Approx. achieve a size of 640 × 480 pixels, suitable 26 sec. 223 sec. 448 sec.*2 for television playback. Small size (320) (default option) Movies are recorded at a rate of 15 frames Approx. Approx. Approx. per second. Each frame has a size of 320 × 52 sec. 438 sec. 881 sec.*2 240 pixels. Smaller size (160) *1 *2 Movies are recorded at a rate of 15 frames per Approx. Approx. second. 211 1754 Each frame has a size of 160 × 120 pixels. sec. sec. Small size allows longer movies to be recorded. Approx. 3525 sec.*2 Total recording time shown is approximate.Time may vary depending on type of memory card used. With E2200, even if a memory card over 256 MB is used, total recording time will be the same as for a 128 MB memory card. Movies Flash Mode Selection in W Mode The flash turns off ($) automatically when movie mode is selected. Digital Zoom Digital zoom can not be used while recording is in progress. Notes on Movies Depending on the make of memory card used, recording may end before the memory card is full (Q 101). During recording with E3200, do not touch the built-in microphone. To prevent the sound of the camera focusing from interfering with recording, select a focus mode of Single AF. The progress indicator stops at 999s. Recording can continue past this point if enough memory is available on the memory card. Movies Movies are recorded as Quick Time movie files with the extension ".MOV" and can be played back on a computer after transfer. 57 W Recording Movies 3 4 MOVIE MOVIE OPTIONS TV movie 640 Movie options Small size 320 Auto-focus mode Smaller size 160 Highlight Movie options. 5 Display MOVIE OPTIONS menu. 6 MOVIE OPTIONS ŕŗ TV movie 640 ŕŗ TV movie 640 Small size 320 Small size 320 ōő Smaller size 160 ōő Smaller size 160 Highlight mode.* Make selection.† † To return to MOVIE menu after making selection, press multi selector to left. * To exit without changing mode, press MENU button. 7 Return to shooting mode. Selected movie mode shown in monitor. Movies 8s 58 MOVIE OPTIONS W Recording Movies The movie menu also includes the following focus options (E3200 only): Focus mode Description Single AF Camera focuses when shutter-release button is pressed halfway. Focus locks when focus operation is complete. Continuous AF Camera adjusts focus continuously. To choose a focus option from the MOVIE menu: 1 2 MOVIE Movie options Single AF Auto-focus mode Continuous AF Highlight Auto-focus mode. 3 AUTO-FOCUS MODE Display options. AUTO-FOCUS MODE 4 AUTO-FOCUS MODE Single AF Continuous AF Continuous AF Highlight desired focus mode. Movies Single AF Make selection. 5 Return to shooting mode. 20s 59 Viewing Movies In full-screen playback mode (Q 22), movies can be played with sound (E3200 only). Movies are indicated by a W icon and can be viewed by pressing the center of the multi selector. Playback controls are displayed at the top of the monitor; press the multi selector to left or right to highlight a control, then press the center of multi selector to perform the selected operation. To 2s 25s Press Description ( While movie is in progress, use multi selector to select ( icon, then press and hold center of multi selector. Fast forward * Use multi selector to select * icon, then press and hold center of multi selector. Playback ends at the last frame; once playback has ended, the first frame of movie will be displayed. Pause playback ) Use multi selector to select ) icon, then press center of multi selector to pause display. Rewind movie one frame , When movie is paused, use multi selector to select , icon, then press center of multi selector. Advance movie one frame - When movie is paused, use multi selector to select icon, then press center of multi selector. Resume playback y When movie is paused, use multi selector to select y icon, then press center of multi selector. Stop playback = Use multi selector to select = icon, then press center of multi selector to return to full-screen playback. Rewind Movies Playback Volume (E3200 only) The zoom buttons control volume during playback. Press l (W) to decrease volume, O (T) to increase. Volume can also be adjusted using the Sound settings > Volume option in the setup menu (Q 90). Deleting Movies To delete a movie, press the u button. A confirmation dialog will be displayed; press the multi selector up or down to highlight an option, then press the center of the multi selector. • Yes: delete movie and return to full-screen playback • No: exit to full-screen playback without deleting movie 60 The Shooting Menu Using the Shooting Menu In P (auto) mode, the following settings can be adjusted from the shooting menu: Option Image mode White balance Exp. +/Continuous BSS Color options Description Choose image size and quality. Q 63-64 Match white balance to your light source. 65 Adjust exposure for very bright, very dark, or highcontrast subjects. 67 Take pictures one at a time or in a sequence. 68 Turn the Best Shot Selector (BSS) on or off. 69 Choose a standard color, vivid color, black-and-white, sepia, or cyanotype effect for your pictures. 70 In P (auto) mode, the shooting menu is displayed when the MENU button is pressed. To make a selection from the shooting menu: 1 SHOOTING MENU 1/2 Image mode White balance Exp. +/Display shooting menu. The Shooting Menu 61 Using the Shooting Menu 1 SHOOTING MENU 1/2 2 Image mode +0.3 White balance 0 Exp. +/- -0.3 Display options. Highlight menu item. 3 EXP. +/- EXP. +/- 4 +0.7 +0.3 0 Highlight option (to return to previous step, press multi selector to left). The Shooting Menu 62 AUTO 19 Make selection. To exit menu and return to shooting mode, press MENU button. Image Mode Image mode Pictures taken with a digital camera are recorded as image files. The size of the files, and with it the number of images that can be recorded in the memory or on the memory card, depends on the size and quality of the images. Before shooting, choose image quality and size according to how you plan to use the picture. IMAGE MODE 1/2 High (2048*) Normal (2048) Normal (1600) Option Size (pixels) L (2048*) (E3200 only) 2,048 × 1,536 w (1600*) (E2200 only) 1,600 × 1,200 b (2048) (E3200 only) 2,048 × 1,536 1:8 Best choice in most situations. 17 × 13 (7” × 5”) c (1600) 1,600 × 1,200 1:8 Smaller size allows more pictures to be stored on memory card. 13 × 10 (5” × 4”) S PC screen (1024) 1,024 × 768 1:8 Suited to display on computer monitors 17” or larger. 9×7 (3.5” × 2.5”) R TV screen (640) 640 480 1:8 Can be displayed full-screen on a television or 13” monitor. Suited to distribution by e-mail or the web. 5×4 (2” × 1.5”) × Quality* Description 1:4 High quality, suitable for enlargements or high-quality prints. Print size (cm)† 17 × 13 (7” × 5”) 13 × 10 (5” × 4”) If in doubt, choose Normal (2048) or Normal (1600). Pictures can be reduced or cropped when played back in the monitor after shooting (Q 42, 78). 63 The Shooting Menu * To reduce the amount of memory each shot occupies, pictures are compressed as they are saved to the memory or memory card. Compression selectively reduces the quality of the image. The more a picture is compressed, the more noticeable this loss of quality is likely to be. The figures show the appropriate compression ratio for each setting. † All figures are approximate. Dimensions in "Description" column assume a printer resolution of approximately 200 dpi, dimensions in "Print size" column a resolution of approximately 300 dpi. Image Mode The following table shows the approximate number of pictures that can be stored in the memory or on 128- and 256-megabyte memory cards at different image mode settings. Memory Memory card Image mode 14.5 MB 128 MB 256 MB High (2048*) (E3200 only) Approx. 9 Approx. 78 Approx. 157 High (1600*) (E2200 only) Approx. 15 Approx. 125 Approx. 252 Normal (2048) (E3200 only) Approx. 18 Approx. 153 Approx. 308 Normal (1600) Approx. 29 Approx. 239 Approx. 482 PC screen (1024) Approx. 61 Approx. 511 Approx. 1028 TV screen (640) Approx. 132 Approx. 1096 Approx. 2203 * All figures are approximate. File size of pictures depends on scene recorded, producing wide variations in number of images that can be stored. Image Mode and Number of Exposures Remaining The figure shown in the monitor for the number of exposures remaining is only an approximation. The file size of compressed images varies with the scene recorded, producing wide variations in the number of pictures that can be stored. Image Size Smaller images create smaller files suited to transmission by e-mail or use in web pages. When printed at larger sizes, however, small images will be rough and uneven in appearance. Print Size The Shooting Menu The size of images when printed depends on the printer resolution: the higher the resolution, the smaller the final print size. Image Mode The current image mode setting is shown by an icon at the bottom left corner of the monitor. AUTO 64 19 White Balance White balance The color of the light reflected from an object varies WHITE BALANCE 1/3 with the color of the light source. The human brain is able to adapt to such changes in color, with the result Auto that we see white objects as white, regardless of White bal. preset whether they are in the shade, direct sunlight, or under incandescent lighting. Digital cameras can mimic this Daylight adjustment by processing information from the camera’s image sensor (CCD) according to the color of the light source. This process is known as a "white balance adjustment." • If you cannot achieve the desired white balance with Auto (M) or you want to lock the white balance for a specific light source or shooting conditions, choose a setting other than Auto (M). • When the white balance setting is changed, the new setting is reflected in the picture in the monitor. Option Description M Auto White balance automatically adjusted to suit lighting conditions. Best choice in most situations. n White bal. preset Gray object used as reference to set white balance under unusual lighting conditions. Daylight White balance adjusted for direct sunlight. Incandescent Use under incandescent lighting. Fluorescent Use under most types of fluorescent lighting. Cloudy Use when taking pictures under overcast skies. Speedlight Use with the flash The Shooting Menu 65 White Balance Preset White Balance Preset white balance is used when shooting under mixed lighting or to compensate for light sources with a strong color cast (for example, to make pictures taken under a lamp with a red shade look as though they had been taken under white light). When n (White bal. preset) is selected from the white-balance menu, the camera will zoom in and the menu shown at right will be displayed in the monitor. WHITE BAL PRESET Cancel Measure White balance measuring window Option Description Cancel Recalls the most recent value for preset white balance from memory and sets white balance to this value. Measure To measure a new value for white balance, place a gray object, such as a piece of cardboard, under the lighting that will be used in the final picture. Frame this object so that it fills the square in the center of the menu shown above. Highlight Measure and press the center of the multi selector to measure a new value for white balance (shutter will be released and camera will return to original zoom position, but no picture will be recorded). The Shooting Menu White Balance At settings other than auto, white balance is shown by an icon in the monitor. AUTO 66 19 Exp. +/The Exp. +/- (exposure compensation) menu is used to alter exposure from the value suggested by the camera, making pictures brighter or darker. Exposure can be adjusted in the range -2.0 to +2.0 EV. • When the exposure compensation is altered, the new setting is reflected in the picture in the monitor. Exp. +/- EXP. +/+0.3 0 -0.3 Choosing an Exposure Compensation Value Exposure Compensation At settings other than 0, exposure compensation is shown in the monitor. AUTO 19 67 The Shooting Menu As a rule of thumb, select positive values when large areas of the frame are very brightly lit (for example, when photographing an expanse of sunlit water, sand, or snow) or when the background is much brighter than the main subject. Choose negative values when large areas of the frame are very dark (for example, when photographing a forest of dark green leaves) or when the background is much darker than the main subject. This is because the camera, in order to avoid extreme over- or under-exposure, tends to lower exposure when the frame is very bright and raise exposure when the frame is very dark, which can make naturally bright subjects look dim and naturally dark subjects appear over-bright, or "washed out." Continuous Continuous Use the options in this menu to capture a fleeting expression on a portrait subject, photograph a subject that is moving unpredictably, or capture motion in a series of pictures. CONTINUOUS Single Continuous Multi-shot 16 Option Description Single Camera takes one picture each time shutter-release button is pressed. Continuous Camera takes pictures continuously while shutter-release button is held down. Pictures are recorded at rate of about three frames every two seconds. With E3200, camera records three pictures when image mode is set to b Normal (2048), and with E2200, six pictures when image mode is set to c Normal (1600). When shutter-release button is pressed all the way, camera takes sixteen consecutive images at rate of about three frames every two seconds. With E3200, up to five series of images can be taken, and Multi-Shot 16 with E2200, one series can be taken. The sixteen images are arranged in four rows of four images and saved as a single picture. Image mode is fixed at b Normal (2048) with E3200 and at c Normal (1600) with E2200. Restrictions on Camera Settings The Shooting Menu At settings other than Single, the flash (Q 24) turns off automatically and focus (Q 20), exposure (Q 67), and auto white balance (Q 65) for all photos are determined by the first picture in each series. When Multi-Shot 16 is selected, digital zoom (Q 18) can not be used. Multi-Shot 16 can not be selected when digital zoom is in effect. BSS (Q 69) is available only at a setting of Single. Continuous At settings other than Single, the current "continuous" setting is indicated by an icon in the monitor. 19 68 Best Shot Selector BSS When the "Best Shot Selector" (BSS) is on, the camera takes pictures as long as the shutter-release button is held down, to a maximum of ten. These images are then compared and the sharpest picture (the picture with highest level of detail) saved to the memory or memory card. BSS is recommended for situations in which inadvertent camera movement can produce blurred pictures, for example when: • the camera is zoomed in • lighting is poor and the flash can not be used Option BEST SHOT SELECTOR OFF ON Description off BSS off; camera functions normally. on BSS on. Flash turns off automatically and focus, exposure, and auto white balance for all photos are determined by the first picture in each series. Notes on BSS BSS may not produce the desired results with a moving subject or if you change the composition while the shutter-release button is pressed all the way down. "Continuous" and BSS CONTINUOUS is automatically set to Single when BSS is on. Choosing another option for CONTINUOUS cancels BSS. The Self-Timer BSS When BSS is on, a BSS icon appears in the monitor. 19 69 The Shooting Menu BSS will not take effect when the self-timer is on, even if On is selected in the BEST SHOT SELECTOR menu. Color Options Color options Use the options in this menu to add special effects to your pictures. There are five special effects to choose from. • The effect you choose is reflected in the picture displayed in the monitor. COLOR OPTIONS 1/2 Standard color Vivid color Black-and-white Option Description Standard color Picture appears with natural colors. Vivid color Picture appears in sharp colors. Black-and-white Picture appears in black and white. Sepia Picture appears in sepia tones. Cyanotype Picture appears with blue cast. White Balance When Black-and-white, Sepia or Cyanotype is selected, the White balance option is not available in the shooting menu. The Shooting Menu Color Options Indicator When an option other than Standard color is chosen, the selected mode indicator is displayed in the monitor. AUTO 70 19 The Playback Menu Using the Playback Menu The playback menu contains the following options: Description Q Print set Select pictures for printing on a DPOF-compatible device; specify number of copies and information to be included on prints. 48-51 Slide show View pictures in the memory or on the memory card in an automatic slide show. 72 Delete Delete all or selected pictures. Protect Protect selected pictures from accidental deletion. Auto transfer Small pic. Copy Mark all or selected pictures for transfer to a computer; turn auto transfer marking on or off. Create small copies of pictures. Transfer pictures from internal memory to memory card or vice versa. 73-74 75 76-77 78 79-81 To display the playback menu: 1 PLAYBACK MENU 1/3 Print set Slide show Delete Display playback menu. 71 The Playback Menu Option Slide Show Slide show This option is used to play pictures back in an automated "slide show" with about three seconds between each picture. The Playback Menu 1 SLIDE SHOW 2 Pause Start Loop Highlight Start. Begin slide show. The following operations can be performed during the show: To Press Pause slide show Skip to next frame Press multi selector to left or up to return to previous slide. Hold multi selector down to rewind through show. Return to previous frame End slide show Description Menu shown right will be disPAUSE played. Highlight Restart and press the center of the multi selecEnd tor to resume show. Highlight End Restart and press the center of the multi selector to end show. Press multi selector to right or down to skip to next slide. Hold multi selector down to fast forward through show. ^ End slide show and return to playback. "Loop" If Loop is selected in the starting screen, the slide show will repeat automatically. To select or deselect the loop option, highlight Loop and press the center of the multi selector. A check mark next to Loop indicates that the loop option is selected. Auto Off SLIDE SHOW Pause Start Loop The camera will enter standby mode if no operations are performed for thirty minutes during a slide show. Small Pictures and Movies Copies created with the small picture option (Q 78) are not displayed during slide shows. Movies are displayed as still images showing the movie’s first frame. 72 Delete Delete DELETE The Playback Menu The delete menu contains the following options: If no memory card is inserted in the camera, pictures in the internal memory will be deleted. If the camera contains a memory card, pictures on the card will be deleted. To delete pictures in the internal memory, remove the memory card. Erase selected images Erase all images Deleting Selected Pictures 1 2 DELETE Erase selected images ERASE SELECTED IMAGES 2004 08.05 12:00 Erase all images MENU Back Highlight Erase selected images. 3 ERASE SELECTED IMAGES 2004 08.05 12:00 MENU Back Highlight picture. ON OFF 4/ 5 Set ON OFF 5/ 5 Set Pictures in memory or memory card displayed as thumbnail images. 4 ERASE SELECTED IMAGES 2004 08.05 12:00 MENU Back ON OFF 4/ 5 Set Select highlighted picture. Selected pictures marked by u icon. 5 Repeat steps 3 and 4 to select additional pictures. To deselect picture, highlight and press multi selector down. To exit without deleting pictures, press ^ button. 73 Delete The Playback Menu 6 DELETE Erase 1 image(s) ? No Yes Confirmation dialog displayed. Select Yes to delete pictures, No to exit without deleting pictures. Deleting All Pictures To delete all unprotected pictures in the memory or on the memory card: 1 DELETE Erase selected images Erase all images Highlight Erase all images. 2 DELETE Erasing all images ( Excluded) No Yes Confirmation dialog displayed. Select Yes to delete pictures, No to exit without deleting pictures. Before Deletion Once deleted, pictures can not be recovered. Be sure that any pictures you would like to keep have been transferred to a computer (Q 45-47). Protected Pictures Pictures marked with a U icon are protected and can not be deleted (Q 75). 74 Protect Protect 1 2 PROTECT 2004 08.05 12:00 MENU Back ON 3 4/ 5 Set Repeat steps 1 and 2 to select additional pictures. To deselect picture, highlight and press multi selector down. To exit without changing protected status of pictures, press ^ button. ON 2004 08.05 12:00 OFF Highlight picture. PROTECT OFF 4/ 5 MENU Back Set Select highlighted picture. Selected pictures marked by U icon. 4 Done Complete operation and return to playback menu. Notes on Protecting Pictures Protected pictures cannot be deleted using the Delete button or menu. However, all pictures, including protected files, will be deleted when the memory or memory card is formatted. The Protect Icon During playback, a protect icon appears on all protected pictures. 2004. 08. 05 12:00 100NIKON 100NIKON 0001. JPG 1/ 4 75 The Playback Menu This option is used to protect pictures from accidental deletion. Protected files can not be deleted by pressing the u button or using the options in the Delete menu. Note, however, that protected pictures will be deleted when the memory or memory card is formatted. Auto Transfer Auto transfer The Playback Menu This option is used to mark pictures for transfer to a computer and to turn automatic transfer marking on and off. AUTO TRANSFER All on All off Select image(s) Option Description V All on (default option) All pictures in memory or on memory card are marked for transfer. Pictures taken while this option is in effect will be marked for transfer. All off Remove transfer marking from all pictures in memory or on memory card. Pictures taken while this option is in effect will not be marked for transfer. Select image(s) Mark selected pictures for transfer. Transferring More than 999 Pictures No more than 999 pictures can be marked for transfer. If the memory or memory card contains more than 999 pictures, transfer all pictures using Nikon View. See the Nikon View Reference Manual (on CD) for details. Hidden Pictures Some Nikon digital cameras allow you to hide pictures during playback. Hidden pictures can be viewed on the E3200/E2200 but can not be selected for transfer. The V Icon Pictures that have been selected for transfer are identified by a V icon. 2004. 08. 05 12:00 100NIKON 100NIKON 0001. JPG 1/ 4 Full-screen playback 1 2 3 4 Thumbnail playback When you connect the camera to a computer via the UC-E6 USB cable and press the center of the multi selector to transfer pictures, only pictures marked with a V icon will be transferred (Q 45). 76 Auto Transfer Marking Selected Pictures for Transfer 2 AUTO TRANSFER AUTO TRANSFER All on ON 2004 08.05 12:00 All off Select image(s) OFF 5/ 5 MENU Back Highlight Select image(s). 3 Pictures in memory or on memory card displayed as thumbnail images. 4 AUTO TRANSFER 2004 08.05 12:00 MENU Back ON 4/ 5 Set Repeat steps 3 and 4 to select additional pictures. To deselect picture, highlight and press multi selector down. To exit without changing transfer status of pictures, press ^ button. AUTO TRANSFER ON 2004 08.05 12:00 OFF Highlight picture. 5 Set OFF 4/ 5 MENU Back Set Select highlighted picture. Selected pictures marked by V icon. 6 Done Complete operation. Marking Pictures for Transfer with Other Cameras Pictures selected for transfer with another model of Nikon camera can not be transferred when the memory card is inserted in the E3200/E2200. Use the E3200/E2200 to reselect the pictures. 77 The Playback Menu 1 Small Picture Small pic. To create a small copy of a picture, select Small pic. after displaying the image in full-screen playback or selecting it in the thumbnail display. The Playback Menu Option Size (pixels) Description q 640 × 480 640 × 480 Copy can be displayed full-screen on television or 13” monitor with no drop in quality. r 320 × 240 320 × 240 Suited to display on web pages. Small file size reduces time needed to display picture in web browser. s 160 × 120 160 × 120 Copy can be sent and received quickly as email attachment. Where application supports display of JPEG images, picture can be viewed in message window. 1 SMALL PIC 2 640 x 480 320 x 240 No Yes 160 x 120 Highlight option. Save this image as displayed? Confirmation dialog displayed. Select Yes to create resized copy, No to exit without creating copy. To view the new, resized copy, press the multi selector down until the copy is displayed. The copy will be displayed after the last picture recorded (in thumbnail playback, small pictures are indicated by a gray border). To reduce file size, copies are stored in the memory or on the memory card as BASIC-quality JPEG files (compression ratio 1 : 16). Copies are stored in separate files with names of the form "SSCNnnnn.JPG," where "nnnn" is a four-digit number assigned automatically by the camera. Copies can not be viewed or cropped using playback zoom. Small Picture • Small pictures can not be created from resized copies or cropped copies. • Small pictures can not be printed using the Direct Print function (Q 52). 78 Copy Copy This option is used to transfer pictures from the camera's internal memory to the memory card, or vice versa. } indicates the camera's internal memory and / the memory card. COPY The Playback Menu Copying Selected Pictures 1 2 COPY CAMERA TO CARD Selected images All images Highlight (memory → memory card) or (memory card → memory), press multi selector to right. 3 4 COPY 2004 08.05 12:00 MENU Back Highlight Selected images. ON OFF 5/ 5 Set Pictures in memory or on memory card are displayed. (Based on when is selected in step 1) COPY 2004 08.05 12:00 MENU Back ON OFF 4/ 5 Set Highlight picture. 79 Copy The Playback Menu 5 6 COPY COPY Selected images will be copied. OK? No Yes ON 2004 08.05 12:00 OFF 4/ 5 MENU Back Set Select highlighted picture. Selected pictures marked by A icon. Repeat steps 4 and 5 to select additional pictures. To deselect picture, highlight and press multi selector down. Confirmation dialog displayed. Select Yes to copy pictures, No to exit without copying pictures. Copying All Pictures To copy all pictures in the memory or on the memory card: 1 COPY 2 CAMERA TO CARD Selected images All images Highlight (memory → memory card) or (memory card → memory), press multi selector to right. 3 COPY All images will be copied. OK? ( excluded) No Yes Confirmation dialog displayed. Select Yes to copy pictures, No to exit without copying pictures. 80 Highlight All images. Copy Copy File Number • When pictures are copied using the All images option, all the pictures in the folder are copied with the same file numbers. • When pictures are copied using the Selected images option, numbering will continue from the lowest number after the last number in the memory or on the memory card to which the pictures have been copied. Ex: when the last number in the memory or on the memory card to which pictures have been copied is 15 (DSCN0015.JPG) The copied pictures are assigned numbers starting from DSCN0016. After that, numbering will continue from the lowest number after the number of the last file that was copied. Print Set If a print order has been created, the print order data will not be copied with the picture. 81 The Playback Menu • If there is not enough space in the memory or on the memory card to receive the copy, IMAGE CANNOT BE SAVED will be displayed (Q 101). Delete unwanted pictures or insert a new memory card (if using a memory card) before trying again. • Movies over 10 MB cannot be copied to the E3200 and movies over 5 MB cannot be copied to the E2200. • Copying of pictures taken with another make of camera or retouched on a computer is not guaranteed by Nikon. The Setup Menu Using the Setup Menu The setup menu contains the following options: Option Description Q Welcome screen Choose the welcome screen displayed when the camera is turned on. 83 Date Monitor settings Date imprint Brightness Sound settings Set the camera clock. 84-85 Hide or display the monitor indicators. 86 Imprint pictures with the date and/or time of recording. Adjust monitor brightness. 87-88 89 The Setup Menu Adjust volume of button, shutter and start-up sounds. 90 Blur warning Choose whether or not to perform a camera shake check. 91 Auto off Choose how long the monitor will remain on before turning off automatically to save power. 92 Format memory/ card Format internal memory or memory cards for use in the camera. 93 Choose a language for camera menus and messages. 94 Choose PTP or Mass Storage according to your computer's operating system. 45 Select the video mode from NTSC and PAL. 94 Language USB Video mode Reset all Battery type Firmware version Restore camera settings to default values. 94 Choose the type of batteries inserted in the camera. 96 Display the current firmware version. 96 SET-UP 1/5 Welcome screen Date Monitor settings To clear the setup menu from the monitor, rotate the mode dial to another setting or press the x button. 82 Welcome Screen This option is used to choose the welcome screen displayed when the camera is turned on. Welcome screen WELCOME IMAGE SELECT 1/2 Disable welcome Nikon Animation Option Description Disable welcome No welcome screen is displayed when camera is turned on. Image shown at right is displayed when camera is turned on. The Setup Menu Nikon Animation Short animation is displayed when camera is (default option) turned on. Select an image You can choose the welcome screen from pictures currently stored in the memory or on the memory card. 1 The SELECT IMAGE screen is displayed. Highlight a picture using the multi selector and press the multi selector up. 2 Press center of multi selector. To select a picture stored in the camera memory, remove the memory card. SELECT IMAGE ON 2003 08.05 12:05 OFF 3/ 5 MENU Back Set Small Pictures and Cropped Copies Resized copies created with the small picture and cropping options can only be selected for the welcome screen if they are (q) 640 × 480 pixels or larger. "Select an Image" When Select an image is selected, the chosen picture will appear at startup even when the memory card containing the image is removed from the camera. If you select Select an image after choosing a custom welcome screen, the confirmation dialog shown at right will be displayed. Select Yes to choose a new picture for the welcome screen, No to exit leaving the welcome screen unchanged. WELCOME IMAGE SELECT Replace current image? No Yes 83 Date Date This option is used to set the camera clock. This option is available after you have set the camera clock when using your camera for the first time. For more information on setting the camera clock, see "First Steps: Basic Setup" (Q 14). Option Date Date Time zone Description Set the date and time (Q 14). The Setup Menu Select the time zone. The normal time zone setting is (home time zone). If you select (travel destination time zone), the time difference is automatically calculated and the date and time in the selected region are displayed. Time zone DATE TIME ZONE 2003. 09.06 13:00 London, Casablanca DaylightSaving Tokyo, Seoul DaylightSaving 1 Press multi selector up or down to highlight HOME TIME ZONE or , then press center of multi selector. Press multi selector down to highlight DayLondon, Casablanca lightSaving and press center of multi selecMENU Back Set tor. The h icon is displayed. Selecting daylight saving time automatically advances the time one hour. To cancel daylight saving time, press center of multi selector again. 2 Press multi selector right to display the time zone screen. 3 Press multi selector left or right to highlight a time zone (region), then press center of multi selector. The Camera Clock The camera clock is less accurate than most watches or household clocks. Check the clock regularly against more accurate timepieces and reset as necessary. 84 Date (Travel Destination Time Zone) To set the clock to the travel destination time zone, highlight and press the center of the multi selector. While the travel destination time zone is selected, a icon will be displayed in the monitor when the camera is in shooting mode. To choose a new travel destination, highlight and press the multi selector to the right, then choose a location as described on the previous page. AUTO 19 DaylightSaving (Daylight Saving Time) To turn daylight saving time on or off, highlight DaylightSaving and press the center of the multi selector. Selecting daylight saving time automatically advances the time one hour. GMT +/– Location GMT +/– Location GMT –14 Sydney, Guam GMT –3 BuenosAires, Sanpauro GMT –13 NewCaledonia GMT –2 Fernando de Noronha GMT –12 Auckland, Fiji GMT –1 Azores GMT –11 Midway, Samoa GMT London, Casablanca Madrid, Paris, Berlin GMT –10 Hawaii, Tahiti GMT +1 GMT –9 Alaska, Anchorage GMT +2 Athens, Helsinki PST (PDT): LosAngels, Seattle, Vancouver GMT +3 Moscow, Nairobi GMT +4 AbuDhabi, Dubai GMT –7 MST (MDT): Denver, Phoenix, La Paz GMT +5 Islamabad, Karachi GMT +6 Colombo, Dacca GMT –6 CST (CDT): Chicago, Houston, MexicoCity GMT +7 Bangkok, Jakarta GMT +8 Beijing, Hong Kong, Singapore GMT –5 EST (EDT): New York Toronto, Lima GMT +9 Tokyo, Seoul GMT +10 Sydney, Guam GMT –4 Caracas, Manaus GMT +11 NewCaledonia GMT +12 Auckland, Fiji GMT –8 Time Zones The time zone can not be selected if the date and time have not been set. Time zone increments of less than one hour are not supported. When travelling to or from destinations at half- or quarter-hour increments from Greenwich Mean Time (GMT), such as Afghanistan, Central Australia, India, Iran, Nepal, or Newfoundland, set the camera clock to local time (Q 14). 85 The Setup Menu The camera supports the following time zones: Monitor Settings Monitor settings Select this option to hide or display the monitor indicators. MONITOR SETTINGS SETTINGS1/2 1/2 Show info Hide info Framing grid Option Description Show info Display current settings in monitor when taking or viewing pictures. Hide info Current settings are hidden. The Setup Menu Framing grid Display framing grid. Current settings are hidden. (P mode only) Monitor off Turn the monitor off. (P mode only) 86 Date Imprint Date imprint The date imprint option is used to imprint the date or the date and time of recording on pictures as they are recorded to the memory or memory card. It can not be used to imprint a date stamp on pictures after recording. DATE IMPRINT 1/2 Off Date Date and time Option Description Time and date do not appear on pictures. Date Date is imprinted at bottom right corner of all pictures taken while this option is in effect. Date and time Date and time are imprinted at bottom right corner of all pictures taken while this option is in effect. Date counter Number of days from stored date until date of recording is imprinted at bottom right corner of all pictures taken while this option is in effect. Image Mode Data imprinted at an Image mode setting of TV screen (640) may be difficult to read. Choose a setting of PC screen (1024) or larger when using the date imprint option. Date Imprint Imprinted data forms a permanent part of the image and will appear whenever the image is printed, regardless of whether the date option is chosen in the Print set menu. At settings other than Off, a Date icon is displayed in the monitor during shooting. Check before shooting to make sure that the camera clock is set to the correct time and date. The date is recorded in the order selected in the DATE menu. You will not be able to select Date or Date and time if the camera clock has not been set. AUTO 19 When shooting with the following, Date Imprint is automatically canceled. E3200 Panorama assist and Movie E2200 BSS, "Continuous" in the Continuous menu, Sports and Sports spectator in the Scene mode, Panorama assist and Movie. Print Set The Print set option can be used to print the date and time of recording on images taken with Off selected in the DATE IMPRINT menu. 87 The Setup Menu Off Date Imprint Date counter This option is used to store the date and imprint the DATE COUNTER number of days from that date until the date of recording on pictures. To imprint the number of days 0155 that have elapsed, set the day count option by select01.01.2004 ing Date counter in the DATE IMPRINT menu. Number of days If the stored date is earlier than the date of recording, the number of days that have elapsed is imprinted on pictures. If the stored date is later than the date of recording, z followed by the number of days until the date of storage is imprinted on pictures. The Setup Menu Option Description Up to 3 dates can be stored. Press multi selector up or down to highlight option in STORED DATES menu, then press multi selector to right. Enter date. Follow steps described in Basic Setup (Q 14). Stored dates STORED DATES Dates between 1 January 1910 and 31 December 2037 can be stored. Display options 05.08.2004 2 20.10.2004 3 ----.--.-- DATE D 01 Press multi selector up or down to highlight Display options, then press center of multi selector. 1 M 01 Y 2004 DISPLAY OPTIONS Number of days Years and days Yrs, mnths, days Date counter When a date that has been stored in the date counter is selected and the date imprint option is set to Date counter, the date counter indicator and stored date number are displayed in the monitor. AUTO 88 19 Brightness Press the multi selector up or down to increase or decrease the brightness of the monitor by moving the indicator on the left of the display up or down. Press the center of the multi selector to make a selection. To return to the setup menu, press the multi selector to the left. Brightness BRIGHTNESS The Setup Menu 89 Sound Settings Sound settings The options in this menu control the sound settings listed below. With E2200, sound settings can only be set On or Off. Choosing Off mutes button, shutter and startup sounds. Tone and volume cannot be adjusted. SOUND SETTINGS 1/2 Button sound Shutter sound Start-up sound Option The Setup Menu Button sound (E3200 only) Shutter sound (E3200 only) Description Control the sound played when buttons are pressed. A different sound is played when an error occurs or when you turn the camera, select a new mode, switch between shooting and playback mode or make a selection from menus. There are three shutter sounds to choose from. Press multi selector up or down to highlight option, press center of multi selector to select. Adjust volume of sound played when camera is turned on. Start-up sound (E3200 only) Volume (E3200 only) 90 BUTTON SOUND Off On SHUTTER SOUND 1 2 3 O ff START-UP SOUND Off On Adjust volume of voice memos, movies, and shutter and start-up sounds. Choose volume for builtin speaker from Loud and Normal. Choosing Off mutes, shutter and start-up sounds, and plays voice memos and movies at lowest volume. Volume Loud Normal Off Blur Warning This option is used to display or hide the camera shake warning after you have taken a picture. Blur warning BLUR WARNING Off On Selecting On displays the warning only if inadvertent camera movement has caused the picture you have just taken to be blurred. Select Yes to keep the picture or No to delete it. PICTURE IS BLURRED. SAVE PICTURE? The Setup Menu No Yes Blur Check If you want to check how blurred the picture is before deciding whether to delete it or not, select Yes to save the picture and then press x. 91 Auto Off Auto off To save battery power, the camera will enter standby mode if no operations are performed for a preset length of time. AUTO OFF Auto off Sleep mode Option The Setup Menu 92 Description Auto Off Choose how long monitor will remain on before turning off automatically. Choose from thirty seconds (30s), one minute (1m) default setting, five minutes (5m) and thirty minutes (30m). Regardless of option chosen in AUTO OFF menu, monitor will remain on for three minutes when menus are displayed. When powered by AC adapter, camera will enter standby mode if no operations are performed for thirty minutes. Sleep mode If On is selected, camera will enter standby mode when there is no change in brightness of subject, even before time selected in AUTO OFF menu has elapsed. The camera will enter sleep mode after thirty seconds of non-operation when Auto off is set to thirty seconds (30s) or one minute (1m), and after one minute when Auto off is set to five minutes (5m) or thirty minutes (30m). AUTO OFF 30s 1m 5m 30m SLEEP MODE Off On Format memory Format memory/card Format card This option is used when you need to format the camera's internal memory or a memory card. If no memory card is inserted in the camera, the internal memory will be formatted, and if the camera contains a memory card, the card will be formatted. To format the internal memory, remove the memory card. MEMORY CARD FORMAT WARNING! All images will be deleted! No Format To format the memory: 1 FORMAT MEMORY 2 Highlight Format (to exit without formatting memory, highlight No and press the center of the multi selector). FORMATTING Begin formatting. While formatting is in progress, message shown above will be displayed. To format a memory card: 1 MEMORY CARD FORMAT WARNING! All images will be deleted! No Format Highlight Format (to exit without formatting card, highlight No and press the center of the multi selector). 2 FORMATTING Begin formatting. While formatting is in progress, message shown above will be displayed. 93 The Setup Menu WARNING! All images will be deleted! No Format Language Language Choose the language for camera menus and messages from Deutsch (German), English, Español (Spanish), Français (French), Italiano (Italian), Nederlands (Dutch), Svenska (Swedish), (Japanese), (Simplified Chinese), or (Korean). LANGUAGE MENU Back Video Mode Set Video mode The Setup Menu Before connecting your camera to a video device such as a television or VCR (Q 44), choose a video mode setting that matches the video standard used in the device. Your Nikon digital camera supports NTSC and PAL standards. Reset All VIDEO MODE NTSC PAL Reset all Select this option to restore the settings listed opposite to their original state. RESET ALL Reset all settings to default values No Reset Option No Reset 94 Description Exit menu, leaving settings unchanged. Restore settings to default values. Reset All The following settings are affected: Image mode White balance Exp. +/Continuous Best Shot Selector Color options Auto transfer Welcome screen Monitor Settings Date imprint Brightness Button sound Start-up sound Shutter sound Volume (E3200 only) Auto Off Sleep mode Blur warning Default Portrait Landscape Sports Night Portrait Party/Indoor Small size (320) ! Auto Off Off Normal (2048) (E3200) Normal (1600) (E2200) Auto ±0 Single Off Standard color All on Animation Show info Off 3 On On 1 Normal 1m Off On The Setup Menu Setting i Portrait assist N Landscape assist j Sports assist m Night portrait assist e Scene W Movie Speedlight Self-timer Macro close-up Choosing Reset also clears the current file number (Q 23) from memory. Numbering will continue from the lowest number available in the memory or on the memory card. All other settings are unaffected. Resetting File Numbering to 0001 To reset file numbering (Q 23) to 0001, select Reset All after either deleting all pictures (Q 74) or formatting the memory card (Q 93). 95 Battery Type Battery type This option is used to choose the type of batteries inserted in the camera. BATTERY TYPE Alkaline COOLPIX NiMH CR-V3 Option Description The Setup Menu Alkaline Select this option when you have inserted alkaline (AA) batteries. COOLPIX (NiMH) Select this option when you have inserted rechargeable EN-MH1 (AA) nickel-metal hydride batteries, or nickel-manganese batteries. CR-V3 Select this option when you have inserted a CR-V3 lithium battery or lithium (AA) batteries. Backup Battery If the backup battery (Q 14) is not charged sufficiently, the battery type setting may revert to the default setting (alkaline batteries). Firmware Version Firmware version Select this option to display the current firmware version. E3200 Ver.XX Back 96 Technical Notes Optional Accessories At the time of writing, the following optional accessories were available for your Nikon digital camera. Contact your local retailer or Nikon representative for details. Rechargeable battery Battery charger Additional EN-MH1 NiMH batteries are available from your retailer or local Nikon representative. MH-70 battery charger for EN-MH1 batteries AC adapter EH-62B AC adapter Carrying case CS-CP18 soft case*1 Water-proof Case WP-CP1*2 *1 Not available in U.S. *2 Not available in some areas. Approved Memory Cards The following memory cards have been tested and approved for use with your Nikon digital camera: San Disk Toshiba Panasonic 16 MB, 32 MB, 64 MB, 128 MB, 256 MB 16 MB, 32 MB, 64 MB, 128 MB, 256 MB 16 MB, 32 MB, 64 MB, 128 MB, 256 MB*, 512 MB* * High speed type of 10 MB/s or over Technical Notes 97 Caring for Your Camera Cleaning Lens One key to cleaning the lens is to not touch it with your fingers. Remove dust or lint with a blower (typically a small device with a rubber bulb attached to one end that you pump to produce a stream of air out the other). To remove fingerprints or other stains that can not be removed with a blower, wipe the lens with a soft cloth, using a spiral motion that starts in the center of the lens and works out to the edges. Monitor Remove dust or lint with a blower. To remove fingerprints and other stains, clean the monitor with a soft, dry cloth, being careful not to apply pressure. Avoid contact with liquid crystal Should the monitor break, care should be taken to avoid injury due to broken glass and to prevent the liquid crystal from the monitor touching the skin or entering the eyes or mouth. Body Use a blower to remove dust and lint, then wipe gently with a soft, dry cloth. After using the camera at the beach or seaside, wipe off any sand or salt with a cloth lightly dampened with fresh water, then dry thoroughly. Technical Notes Do not use alcohol, thinner, or other volatile chemicals. Notes on the Monitor • The monitor may contain a few pixels that are always lit or that do not light. This is a characteristic common to all TFT LCD monitors, and does not indicate a malfunction. Images recorded using the product will not be affected. • When you frame bright subjects, vertical comet-like streaks that whiten toward either end may appear in the monitor. This phenomenon, known as "smear," does not appear in the final photograph and does not indicate a malfunction. Some smear may appear in movies. • Images in the monitor may be difficult to see in a bright light. • The monitor is lit by an LED backlit. Should the monitor begin to dim or flicker, contact your Nikon service representative. 98 Caring for Your Camera Storage Turn the camera off when not in use and check that the power-on lamp is off before putting the camera away. To prevent mold or mildew, store the camera in a dry, well-ventilated area. If you will not be using the product for long periods, remove the batteries to prevent leakage and store the camera in a plastic bag containing a desiccant. Do not store the camera case (available separately) in a plastic bag, as this may cause the material to deteriorate. Note that desiccant gradually loses its capacity to absorb moisture and should be replaced at regular intervals. Do not store your camera with naptha or camphor moth balls or in locations that: • are poorly ventilated or damp • are next to equipment that produces strong electromagnetic fields, such as televisions or radios • are exposed to temperatures below -10 °C (14 °F) or above 50 °C (122 °F; for example near a space heater or in a closed vehicle on a sunny day) • are subject to humidities of over 60% To prevent mold or mildew, take the camera out of storage at least once a month. Turn the camera on and release the shutter a few times before putting the camera away again. Store the batteries in a cool, dry place. Batteries • If the battery terminals are dirty, wipe them off with a clean, dry cloth before use. • Repeatedly recharging NiMH batteries before they are fully exhausted may result in a "memory" effect, causing the batteries to lose their charge quickly. The batteries will return to normal after being fully discharged and recharged. • NiMH batteries gradually lose their charge when left unused. We recommend that you charge NiMH batteries immediately before use. • Used batteries are a valuable resource. Please recycle used batteries in accordance with local regulations. 99 Technical Notes • When turning the camera on, check that the batteries are charged. The monitor will display a warning when batteries are low. • Carry a fresh CR-V3 battery as a replacement when taking pictures on important occasions.You may find it difficult to purchase replacement batteries on short notice. • On cold days, the capacity of batteries tends to decrease. Be sure that the batteries are fully charged before heading outside to take pictures in cold weather. Keep spare batteries in a warm place and exchange as necessary. Once warmed, a cold battery may recover some of its charge. Error Messages The following table lists the error messages and other warnings that appear in the monitor and how to deal with them. Display Z (Flashes) WARNING ! ! BATTERY EXHAUSTED AFz (zflashes red) 2 PICTURE IS BLURRED. SAVE PICTURE? No Yes Technical Notes WARNING ! ! PLEASE WAIT FOR THE CAMERA TO FINISH RECORDING < MEMORY CARD IS WRITE PROTECTED / CARD IS NOT FORMATTED Format No 100 Problem Solution Set clock to current date and time. Clock not set. Turn camera off and replace batteries. Batteries exhausted. Use focus lock to focus on another subject at same distance, then recompose picture. Use flash, or steady camera using tripod, by placing camSlow shutter speed. Pictures era on level surface, or by may be blurred. holding camera in both hands with elbows against torso. Camera cannot focus. Q 14 12 21 18, 24-25 Select Yes to keep picture, No to delete.Camera shake warning can be hidden. 91 Camera turned off or x butMessage clears from display ton pressed during recording. automatically when recording The mode dial was rotated is complete. during recording. 21 Write-protect switch "lock" position. 11 Recorded blurred. picture may is be in Slide write-protect to "write" position. Press multi selector up to highlight FORMAT and press Memory card has not been to right to format card, or formatted for use in camera. turn camera off and replace > card. 93, 10-11 Error Messages Display Problem THIS CARD CANNOT BE USED 4 WARNING ! ! Error accessing memory card. THIS CARD CANNOT BE READ / Solution Q Use approved card. Check that connectors are clean. 97 - 101 Technical Notes • Choose lower image qual- 63-64 ity/ size. Camera in shooting mode: Insufficient memory to record • Delete pictures. 22-23, pictures at current settings. 73-74 OUT OF • Insert new memory card. 10 MEMORY / Camera connected to com- Disconnect camera, delete 22-23, puter: Not enough space on unwanted pictures, and try memory card to record infor73-74 again. mation need for transfer. 93 • Memory card has not been • Reformat memory card. formatted for use in camera, or error occurred while saving picture. • Camera has run out of file • Insert new memory card or 10, 22, 23, delete pictures. numbers. 73-74 IMAGE CANNOT • Camera can not copy pic- • Copies can not be created 42, 78 from movies or from other ture using small picture, or BE SAVED copies. crop options. / 93 • Memory card has not been • Reformat memory card. formatted for use in camera. • Error occurred while saving movie. • Camera has run out of file • Insert new memory card or 10, 73 delete pictures or movies. numbers. • Takes long time to save • Insert memory card with 56, 97 faster processing speed. movie on memory card. CARD CONTAINS No pictures on memory card or in memory. NO IMAGES Press x button to return to 22 No pictures on memory card shooting mode. ALL IMAGES that can be viewed on E3200 ARE HIDDEN or E2200. FILE CONTAINS File created by computer or View file on computer or corNO IMAGE DATA different make of camera. rect make of camera. Error Messages Display WARNING! MODE DIAL IS NOT IN THE PROPER POSITION THIS IMAGE CANNOT BE DELETED Problem Solution Mode dial is positioned Adjust mode dial to select between two modes. desired mode. Technical Notes Attempt to delete protected Remove protection before picture. deleting picture. If error appears in computer USB cable disconnected or monitor, click OK to exit memory card removed while Nikon View. Turn camera off, pictures are being transferred reconnect cable or replace to computer. memory card, then turn camera on and transfer pictures. COMMUNICATurn camera off and disconTIONS ERROR nect cable, then choose new USB setting in camera setup USB option set incorrectly. menu and reconnect camera. If error persists, use Nikon View button to transfer pictures. No pictures selected for trans- Disconnect camera and select NO IMAGES fer when a (V) button at least one picture for transARE MARKED pressed to transfer pictures to fer, then begin transfer FOR TRANSFER computer. again. Check that camera is conTRANSFER Error occurred when pictures nected and that batteries are ERROR were transferred to computer. fully charged. No need to specify new time zone NEW CITY IS IN Travel destination is in same if travel destination is in same THE CURRENT time zone as home location. time zone as home location. TIME ZONE Turn camera off and then on Error has occurred during lens again. If error persists, conLENS ERROR operation. tact retailer or Nikon representative. Turn camera off, unplug optional AC adapter (if using), remove and reinsert Error has occurred in camera's SYSTEM ERROR batteries, and turn camera internal circuitry. on. If error persists, contact retailer or Nikon representative. 102 Q 6 75 45-47 45 47, 76-77 12 46 84 - 8-9, 12 Troubleshooting If your camera fails to function as expected, check the list of common problems below before consulting your retailer or Nikon representative. Refer to the page numbers listed in the right-most column for information on solving the problems listed here. Electronically-Controlled Cameras In extremely rare instances, unusual characters may appear in the monitor and the camera may stop functioning. In most cases, this phenomenon is caused by a strong external static charge. Turn the camera off, remove and replace the batteries, and turn the camera on again, or, if you are using an AC adapter (available separately), disconnect and reconnect the adapter, and turn the camera on again. In the event of continued malfunction, contact your retailer or Nikon representative. Note that disconnecting the power source as described above may result in the loss of any data not recorded to the memory or memory card at the time the problem occurred. Data already recorded to the memory or memory card will not be affected. Problem Possible cause Q 12 8 Monitor is blank • Camera is off. • Batteries are not correctly inserted or battery-chamber cover is not properly latched. • Batteries are exhausted. • EH-62B AC adapter (available separately) is not properly connected. • Camera is in sleep mode. Press shutter-release button halfway. • Monitor is off. • USB cable is connected. • AV/Video cable is connected. • Batteries are low. • Batteries are cold. 12 99 13 5 - No indicators appear • Indicators are hidden. Select Show info for Monitor in monitor settings option in setup menu. 86 • Ambient lighting is too bright: move to a darker location or use viewfinder. • Monitor brightness needs adjustment. • Monitor is dirty: clean monitor. 19 Monitor is hard to read 89 98 103 Technical Notes Camera turns off without warning 12 - Troubleshooting Problem No picture is taken when shutterrelease button is pressed Pictures are too dark (underexposed) Possible cause Q • Camera is in playback mode. 22 • Batteries are exhausted. 12 • Red (!) lamp flickers: flash is charging. 20 • Green (AF) lamp flickers: camera unable to focus. 20 • Message "CARD IS NOT FORMATTED" appears in 10-11, monitor: memory card is not formatted for use in your 93 camera. • Message "OUT OF MEMORY" appears in monitor: 63 insufficient memory to record picture at current Image mode setting. • Flash is off. • Flash window is blocked. • Subject is outside range of flash. • Exposure compensation is too low. Pictures are too • Exposure compensation is too high. bright (overexposed) 24 18 25 67 67 • Subject was not in focus area when shutter-release button was pressed halfway. • Green (AF) lamp flickers: camera unable to focus. Pictures are blurred • Camera shook during shot. Blurring caused by camera shake can be reduced by: Using the flash Using the Best Shot Selector (BSS) Using the self-timer with a tripod Randomly-spaced bright pixels ("noise") appear in image • Shutter speed too slow. Noise can be reduced by: 24 Using the flash Selecting m (night portrait assist) mode, or selecting 33, 35, 36 e (scene) mode and choosing E Dusk/Dawn or F Night landscape (E3200) Selecting i (portrait assist), N (landscape assist), 30, 31 m (night portrait assist) mode, or selecting e (scene) 33 mode and choosing B Party/Indoor, C Beach/ 35-39 Snow, D Sunset, E Dusk/Dawn, F Night 68, 69 landscape, A Close up, H Fireworks show, I Copy, K Panorama assist, or selecting P (Auto) mode and choosing (single, turning BSS off) (E2200) Colors are unnatural • White balance does not match light source. • Color options is not set to Standard color. Technical Notes Pictures are out of focus 104 20 20 24 69 26 65 Troubleshooting Problem Possible cause Q 24 Flash does not fire • Flash is off. Note that flash turns off automatically when; The mode dial is set to N (landscape assist), j (sports assist), or W (movie), or to e (scene) mode with any of D Sunset, F Night landscape, G Museum, H Fireworks show, or E Dusk/ Dawn selected in scene menu Picture can not be played back • Picture has been overwritten or renamed by computer or other make of camera. • Picture is a movie. Copy can not be cre• Picture was created with small picture, or crop option. ated using small pic• There is not enough free space on memory card to ture or crop options store new copy. 31, 32, 56, 35-36 60 42, 78 16-17 • Picture is a movie. • Picture was created with small picture option. • Picture has been cropped to size less than 320 × 240 60 78 42 Nikon View does not start when camera is connected or memory card inserted in card reader or card slot • Camera is off. 12-13 • EH-62B AC adapter (available separately) is not prop- 9, 12 erly connected, or batteries are exhausted. • UC-E6 USB cable is not correctly connected, or card not 10-11, properly inserted in card reader or card slot. 46 • USB item in setup menu set to PTP when camera con45 nected to computer running Windows 2000 Professional, Windows Millennium Edition (Me), Windows 98 Second Edition (SE), or Mac OS 9. • Camera is not registered in Device Manager (Windows only). See Nikon View Reference Manual (on CD) for further information. 105 Technical Notes Can not zoom in on picture Specifications E3200 digital camera E2200 digital camera Effective pixels 3.2 million (E3200); 2.0 million (E2200) E3200 1/2.7” high-density CCD; total pixels: 3.34 million CCD E2200 1/3.2” high-density CCD; total pixels: 2.14 million 2,048 × 1,536 (2048) (E3200 only) 1,600 × 1,200 (1600) (E3200 only) Image size (pixels) 1,600 × 1,200 (1600) (E2200 only) 1,024 × 768 (1024) 640 × 480 (640) Lens 3 × Zoom Nikkor E3200 F=5.8 - 17.4 mm (35-mm [135] camera-format equivalent: 38 - 115 mm) Focal length E2200 F=4.7 - 14.1 mm (35-mm [135] camera-format equivalent: 36 - 108 mm) f/-number f/2.8 - f/4.9 (E3200); f/2.6 - f/4.7 (E2200) Seven elements in six groups (E3200) Construction Six elements in five groups (E2200) 4 × (35-mm [135] camera-format equivalent: 460 mm Digital zoom [E3200]/430 mm [E2200]) Contrast-detect through the lens (TTL) AF, with AF-assist illuAutofocus (AF) minator (E3200 only) Focus range 30 cm (1´) - ∞; macro mode 4 cm/1.6” (W) - ∞ Focus-area selection Center with five-area selection in frame assist mode Viewfinder Real-image zoom viewfinder with LED indication Magnification 0.34 - 0.94 × Approximately 82% horizontal and 82% vertical (E3200) Frame coverage Approximately 80% horizontal and 80% vertical (E2200) 1.6”, 80,000-dot, low temperature polysilicon TFT LCD monitor Monitor Frame coverage Approximately 96% horizontal and 96% vertical (shooting mode) Storage Media SD memory cards/Internal memory (14.5 MB) Compliant with Design Rule for Camera File System File system (DCF), Exif 2.2, and Digital Print Order Format (DPOF) Compressed: JPEG-baseline-compliant File formats Movies: Quick Time 256-segment matrix metering linked to AF area Metering (when frame is displayed in frame-assisted scene mode) Exposure Programmed auto exposure with exposure compensation Exposure control (-2.0 - +2.0 EV in steps of 1/3 EV) Type Technical Notes 106 Specifications Range Shutter Speed Aperture Range Sensitivity Self-timer Built-in Speedlight Range (approx.) Flash control Interface Video output I/O terminals Power sources Dimensions (W × H × D) Approximate weight Temperature Operating environment Humidity Design Rule for Camera File System (DCF) Your camera conforms to the Design Rule for Camera File System (DCF), a standard widely used in the digital camera industry to ensure compatibility among different makes of camera. Exif Version 2.2 Your camera supports Exif (Exchangeable Image File Format for Digital Still Cameras) version 2.2, a standard that allows information stored with pictures to be used for optimal color reproduction when images are output on Exif-compliant printers. 107 Technical Notes Number of frames taken in succession W: +1 - +17.8 EV (E3200); +0.8 - +17.7 EV (E2200) T: +2.6 - +16.2 EV (E3200); +2.5 - +16.2 EV (E2200) Mechanical and charge-coupled electronic shutter 4 - 1/3,000 s Electronically-controlled preset aperture Two steps (f/2.8 and f/5.6 [W]) (E3200) Two steps (f/2.6 and f/5.2 [W]) (E2200) Approximately equivalent to ISO 50 (auto gain of two to four times) (up to equivalent of ISO200) Ten-second duration W:0.4 - 3.4 m/1´3” - 11´2” (E3200); 0.4 - 3.7 m/1´3” - 12´1” (E2200) T: 0.4 - 2.0 m/1´3” - 6´6” (E3200); 0.4 - 2.0 m/1´3” - 6´6” (E2200) Sensor flash system USB Can be selected from NTSC and PAL • DC in • A/V out/digital I/O (E3200); • Video out/digital I/O (E2200); • Two rechargeable Nikon EN-MH1 NiMH batteries • One CR-V3 lithium battery • Two LR6 (AA) alkaline batteries • Two ZR6 (AA) nickel manganese batteries • Two FR6/L91 (AA) lithium batteries • EH-62B AC adapter E3200: 140 frames (alkaline batteries) 320 frames (EN-MH1)/550 frames (CR-V3). E2200: 150 frames (alkaline batteries) 350 frames (EN-MH1)/600 frames (CR-V3). Measured at standard temperature (25°C/77°F) with fullycharged batteries under standard Nikon test conditions: zoom adjusted with each shot, flash used in approximately one half of shots, image type set to Normal. 88 × 65 × 38 mm (3.5” × 2.6” × 1.5”) 140 g (4.9 oz) without battery or memory card 0 - 40 °C (32 - 104 °F) Less than 85% (no condensation) Index Symbols BSS, see Best Shot Selector P (auto) mode, 6, 16-21 u (delete) button, 3, 22, 23, 75 ! lamp, see Lamp, red (!) N (landscape assist) mode, 28, 31 W (movie) mode, 6, 56-59 m (night portrait assist) mode, 28, 33, 104 x (play) button, 3, 12, 22 i (portrait assist) mode, 28, 30 / (recording) icon, 21 j (sports assist) mode, 28, 32, 104 . @ (voice memo), 43 < (wait) icon, 21, 32 C A Technical Notes AC adapter, i, iii, vi, 9, 97, 107 AFz, 4, 20, 100 AF lamp, see Lamp, green (AF) Audio/video (AV) cable (EGCP12), 44 Audio/video (AV) output connector, 3 Auto off, 13, 82, 92 Auto transfer, 71, 76-77 B Backlit subjects, 34 Back light, 28, 37 Batteries, i-ii, vi, 8-9, 12, 99, 107 LR6 (AA), i, 8, 107 CR-V3, i, 8, 9, 96, 99, 107 EN-MH1, i, 8, 9, 96, 97, 107 charging, 9 FR6/L91 (AA), i, 8, 107 ZR6 (AA), i, 8, 107 Battery type, 82, 96 Beach/Snow, 28, 35 Best Shot Selector, 36, 69, 104 Blur, 24, 25, 26, 33, 34, 69, 104 Blur warning, 82, 91 Brightness, 82, 89 108 Clock, see Date Close-ups, 25, 27, 36 Close up, 28, 36 Color options, 61, 70 Computer, 45-47 copying pictures to, 76-77 Continuous, 61, 68 Copy, 28, 37 Cropping pictures, 41, 42, 105 CR-V3, see Batteries D Date, 14-15, 51, 82, 84, 87 Date imprint, 51, 82, 87 DCF, see Design rule for Camera File system Delete, 71, 73-74 Deleting pictures, 73-74 all pictures, 74 during shooting, 23 in full-screen playback, 22 selected pictures, 73-74 Design rule for Camera File system, 106, 107 Digital Print Order Format, 48, 52, 106 DPOF, see Digital Print Order Format Dusk/Dawn, 28, 35, 104 E E-mail, 63, 64, 78 EN-MH1, see Batteries Error messages, 100-102 Exif 2.2, 106, 107 Exif Print, see Exif 2.2 Exp. +/-, 61, 67, 104, 106 Exposure compensation, see Exp. +/- F File numbering, 23, 95 Fill flash, 24, 37 Fireworks show, 28, 37, 104 Firmware version, 96 Flash, ii, 2, 24-25, 104, 107 mode, 16, 24, 25, 33, 3537 Focus, 18-19, 104, 106 Focus lock, 7, 21, 30 Format card, 82, 93 Framing assist, 6, 28, 29-33 Framing pictures, 18-19, 2933 I Image quality, see Image mode Image mode, 16, 34, 63-64 Image size, see Image mode ISO, 25 J JPEG, 23, 106 L Lamp, green (AF), 3, 7, 12, 20, 104 Lamp, red (!), 3, 12, 20, 104 Language, 14, 94 Language, choosing, 14 Lens, iii, 2, 99, 106 M Macro mode, 27, 30-33, 3538 Memory cards, ii, 2, 10-11, 106 approved, 97 capacity of, 16, 64 formatting, 11, 75, 93 insertion and removal of, 10-11 MENU button, 3 MH-70 battery charger, 9, 97 Microphone, 2 Mode dial, 3, 6, 29 Monitor, ii, 3, 4-5, 18-19, 98, 103, 106 indicators in, 4-5, 103 turning on and off, 5 Monitor settings, 82, 86 MOV, see Movies Movies, 56-60, 106 recording, 56-59 viewing, 60 Index Movie menu, the, 57 Multi selector, 3, 7 Museum, 28, 36, 104 N Night landscape, 28, 36, 104 Nikon View, 45, 105 NTSC, see Video mode Number of exposures remaining, 16, 17 O On/off, see Power switch P Q Quality, see Image mode Quick Time, see Movies R Red-eye reduction, see Flash Reset all, 82, 94 Resizing pictures, 78 S e (scene) mode, 28, 34-38 Secure Digital (SD), see Memory cards Self-portraits, 26 Self-timer, 26, 69, 106 Self-timer lamp, 2, 26 Wide angle, see Zoom W button, see Zoom buttons Z Zoom, 18-19, 106 digital, 18-19, 57, 106 indicator, 18 optical, 18-19 playback, 41, 105 Zoom buttons, 3, 18, 40-41 T Telephoto, see Zoom Television, 44, 94 connecting to, 44 taking pictures for display on, 57, 63 Thumbnail playback, 40 Transfer marking pictures for, 7677 Tripod, 3 T button, see Zoom buttons Technical Notes PAL, see Video mode Party/Indoor, 28, 35 PictBridge, 52, 55 Play back, 22-23, 40-43, 44, 45 full-screen playback, 2223 movie playback, 60 on TV, 44 Playback menu, 71-81 Power-on lamp, 2, 12-13, 16 Power switch, 2, 12-13 Printing pictures, 48-51, 64 See also Date imprint, Digital Print Order Format Print set, 48-51, 71, 87 Protect, 71, 75 Protected pictures, 74, 75 Sensitivity, 25, 107 Setup menu, 82-96 f (setup) mode, 6, 82-96 Shooting menu, 61-70 Shutter-release button, 2, 7 Shutter-release delay, see Selftimer Size, see Image mode Slide show, 71-72 Small pic, 71, 78 Smear, 98 Sound settings, 82, 90 Speaker, 2 Speedlight, see Flash Standby mode, 13, 92 Strap, camera, i, 2 Sunset, 28, 35 Support information, 1 U USB, 45-47, 82 cable (UC-E6), 45-46 connector, 3 V VCR, 44, 94 Video output connector, 3 Video cable (EG-CP11), 44 Video mode, 44, 82, 94 Video output, 107 Viewfinder, 2, 3, 18-19 W Welcome screen, 82, 83 White balance, 65-66, 70, 104 preset, 66 109 No reproduction in any form of this manual, in whole or in part (except for brief quotation in critical articles or reviews), may be made without written authorization from NIKON CORPORATION. The Guide to Digital Photography with the DIGITAL CAMERA (En) Fuji Bldg., 2-3 Marunouchi 3-chome, Chiyoda-ku, Tokyo 100-8331, Japan TR3L03(11) 6MAA9511-A 1AG6P1P1940-A
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project