BrushGrubber 12 in. Original Brush Remover Tool Use and Care Manual

Add to My manuals
1 Pages

advertisement

BrushGrubber 12 in. Original Brush Remover Tool Use and Care Manual | Manualzz

IMPORTANT SAFETY INFORMATION

Read and understand all safety precautions and instructions before use.

The Brush Grubber is designed for outdoor use.

Check Brush grubber before each and every use for signs of wear.

The Brush Grubber is designed to remove brush up to 3” diameter.

The Brush Grubber is not to be used on people or pets.

Figure 1

INSTRUCTIONS

1. Place Brush Grubber on each side of trunk of brush near the base/ground with spring on Brush Grubber placed towards the ground as shown in figure 1. It is recommended to cut brush off approximately 2-4 feet above the ground prior to removal of stump.

2. Securely Attach a chain to the clevis of Brush Grubber and the opposite end of chain towing/pulling vehicle.

Take caution that the chain is long enough so the brush will not hit/strike the operator of the towing/pulling vehicle.

Do Not jerk the Brush Grubber while there is slack in the chain.

3. To remove Brush Grubber from the trunk of brush push back on the clevis (towards the trunk). Take caution of all pinch points on the Brush Grubber.

* Take caution of all pinch points on the Brush Grubber.

* Take caution of grip pads when opening the jaws of the Brush Grubber. Keep fingers and hands free and clear.

WARNING

BAC Industries, Inc. and Brush Grubber will not be held liable for any damages, losses or injury due to the misapplication or misuse of this product or any other reason. Always wear approved safety glasses, protective clothing, and proper hand and foot protection at all times. Keep all people, pets, or animals clear from brush removal work area.

Brushgrubber.com

PO BOX 5064

HOPKINS, MN 55343

PH: 952-945-9058 www.brushgrubber.com

Email: [email protected]

FOR ANY QUESTIONS PLEASE CONTACT OUR OFFICE OR VISIT WWW.BRUSHGRUBBER.COM

advertisement

Related manuals

advertisement