Specifications | Olympus 105R Digital Camera User Manual

Olympus 105R Digital Camera User Manual
ZOOM 105 R
INSTRUCTIONS
Before using your camera, read this manual carefully to ensure
correct use.
Thank you for purchasing an Olympus camera. Before
you start to use your new camera, please read these
instructions carefully to obtain optimum performance
and a longer service life from the unit.
WARNING
Ignoring this mark may result in
the death or serious injury of
the user.
KEEP THE BATTERIES AWAY FROM FIRE.
NEVER TRY TO DISASSEMBLE, RECHARGE, OR
SHORT CIRCUIT BATTERIES.
NEVER ATTEMPT TO DISASSEMBLE THE CAMERA;
IT CONTAINS A HIGH-VOLTAGE CIRCUIT.
IF THE INTERNAL PARTS OF THE CAMERA ARE
EXPOSED DUE TO DROPPING OR DAMAGE,
REMOVE THE BATTERIES IMMEDIATELY TO
PREVENT FURTHER USAGE.
IN CASE OF MALFUNCTION, CONSULT YOUR
2
NEAREST OLYMPUS DEALER OR OLYMPUS
SERVICE CENTER.
MAIN FEATURES
Built-in 38mm ~ 105mm approx. 3X zoom lens.
Symbols used in this manual:
Incorrect
Operation order
Indicator blinking
Next operation
Automatic operation
Attention
Manual operation
Indicator on
Depress halfway
Pay particular attention items in the instructions enclosed in
boxes
Product shown in the illustrations may be slightly different from
the unit.
3
PREPARATIONS
BASIC OPERATIONS
4
6
8
Names and functions of parts
Viewfinder display/LCD panel
Diopter adjustment
Using the strap
Outline of operations
Loading the battery
Checking the battery
Points to remember
9
9
10
13
14
Loading the film
Taking pictures
Using the Focus lock
After Shooting
Unloading the film
17
20
25
27
28
15
ADVANCED TECHNIQUES
CAMERA MAINTENANCE
Using the flash modes
29
31
32
33
34
35
36
38
Questions and answers
Care and storage
Battery handling
39
40
43
45
52
Auto (Auto Flash)
Auto-S (Red-Eye Reducing Flash)
OFF (Flash Override)
FILL-IN (Forced Activation)
Night Scene
Spot
Selftimer/Remote Control*
Troubleshooting
Specifications
* Optional
5
NAMES AND FUNCTIONS OF PARTS
PREPARATIONS
Zoom lever (See p. 21.)
Zooms in — telephoto.
Zooms out — wide-angle.
Shutter release button (See p. 16.)
Selftimer/Remote Control button (See p. 38.)
Flash mode button (See p. 29.)
LCD panel (See p. 8.)
Flash
Selftimer indicator
Strap eyelet
Viewfinder
Light sensor
Lens barrier
Autofocus windows
Lens
Do not soil as this can cause blurred pictures.
Wipe clean with a soft cloth.
6
Diopter adjustment dial (See p. 9.)
Viewfinder (See p. 8.)
Orange lamp
Green lamp
Film window
Back cover
Mid-roll rewind button (See p. 28.)
Tripod socket
Battery compartment cover
Back cover release (See p. 17.)
7
VIEWFINDER DISPLAY/LCD PANEL
Autofocus mark
Viewfinder Display
Position your subject within
Close-up correction marks
the autofocus mark.
At a close distance, your
LCD Panel
subject must be
positioned within the
Exposure counter
close-up correction marks. (See p. 19.)
Orange lamp
Battery check (See p. 14.)
Lights when the flash is
Spot (See p. 36.)
ready to fire.
Selftimer/Remote Control
Blinks while the flash is
(See p. 38.)
recharging.
Flash modes (See p. 29.)
Green lamp
Lights when the subject
is in focus.
Blinks when the subject
is not in focus.
8
Note: The LCD panel does not actually display all indication
simultaneously as shown.
DIOPTER ADJUSTMENT
To Adjust the Viewfinder to Compensate for Near- and Far-sighted Vision
Turn the diopter adjustment dial until the
viewfinder display becomes clear.
Turn to the right if you are far-sighted or to the left if you
are near-sighted.
USING THE STRAP
Attaching the strap.
9
OUTLINE OF OPERATIONS
Basic Shooting Procedures
Load a battery (p. 13).
Open the back cover (p. 17).
Load the film (p. 17).
(Use of ISO 400 film is recommended.)
Close the back cover. The film
automatically advances to the first
frame
(p. 19).
10
Open the lens barrier until you hear a
click (p. 19).
Make sure the exposure counter on the
LCD panel reads
(p. 19).
Press the zoom lever for telephoto or
wide-angle photography (p. 21).
Place the autofocus mark on the
subject you want to photograph
11
(p. 22).
Depress the shutter release button halfway
to make sure the green lamp lights (p. 22).
Depress the shutter release button fully
to take a picture (p. 23).
When the film reaches the end, it will
automatically rewind (p. 28).
Open the back cover to remove the
rewound film (p. 28).
12
LOADING THE BATTERY
Close the lens barrier. Push OPEN to
open the battery compartment cover
Insert the new battery correctly as
shown and close the battery
compartment cover tightly.
Use a 3 V lithium battery (DL 123A, CR123A, or
equivalent.)
About 15 rolls of film can be used with one new battery.
(p. 39)
Read "Battery Handling" on page 43.
13
CHECKING THE BATTERY
Open the lens barrier as shown until you
hear a click. Check the remaining battery
power.
Display
lights (and turns off
Meaning
Battery is OK.
automatically).
You can shoot.
blinks and other
indicators on the LCD panel
Battery power is low and
battery should be replaced.
are displayed normally.
blinks and other
indicators on the LCD panel
go out.
Battery is dead and should
be replaced immediately.
Note: Keep spare battery on hand when going on a long trip or
a wedding or when using the camera in cold weather.
14
POINTS TO REMEMBER
Hold the Camera Correctly.
Correct.
Hold the camera firmly with both hands
while keeping elbows at sides to prevent
the camera from shaking.
Correct.
In the vertical position, hold the camera
with its flash positioned at the top.
Incorrect.
Caution:
Keep your fingers and the strap away from the lens,
autofocus windows and flash. (See page 6)
15
Proper Shutter Release.
Practice before loading the film.
Depress the shutter release button
halfway to lock the focus.
The green lamp next to the viewfinder lights.
Depress the shutter release button fully
to release the shutter and take the
picture.
16
Cautions:
Press the shutter release button gently.
Avoid shaking the camera when pressing the
shutter release button to prevent blurry pictures.
LOADING THE FILM
BASIC OPERATIONS
Slide the back cover release upward to
open the back cover.
Do not touch the inside of the camera,
especially the lens. If there is dust or dirt on
the lens, remove it with a blower brush.
Insert the film cartridge, making sure
the film is lying flat.
Notes:
Use of ISO 400 film is recommended.
When using non-DX-coded film, ISO 100 is
automatically set.
17
Correct.
Make sure the film is lying flat before closing
the back cover.
Incorrect.
If the film is not lying flat as shown, the film
may not advance to the first frame.
18
Align the film leader with the mark
and close the back cover.
The film automatically advances to the first
frame.
The film does not overlap any of the positioning
guides
shown on the left.
Open the lens barrier until you hear a
click.
The exposure counter on the LCD panel reads
Note:
If
19
blinks in the exposure counter, as shown on the left,
the film is improperly loaded. Reload the film.
TAKING PICTURES
1.
Open the lens barrier until you hear a
click.
The lens extends slightly and the LCD panel
activates.
20
Aim the camera at your subject. Use
the zoom lever for telephoto or wide
angle photography.
How to Use the Zoom Lever:
Telephoto:
Pull the lever to the "T" side to zoom in.
Maximum telephoto focal length: 105 mm
Wide angle:
Push the lever to the "W" side to zoom out.
Maximum wide-angle focal length: 38 mm
21
Position the autofocus mark on your
subject.
Autofocus mark
Do not look directly at the sun through the
viewfinder.
Depress the shutter release button
halfway to adjust the focus.
Focus has been correctly adjusted and the green
lamp lights. Exposure also will be adjusted
automatically.
22
Depress the shutter release button fully
to take the picture.
The film automatically advances to the next frame.
Working Distance
The focus range of the camera is 0.6 m (2 ft)
to (infinity).
When the subject is closer than 0.6 m (2 ft), the
shutter will not release. (The green lamp blinks.)
When the subject is extremely close to the
camera, the subject will be out of focus
although the shutter releases.
23
Close-up Correction
Picture frame
Close-up correction marks
Image area of picture at 0.6 m (2ft)
The viewfinder's picture frame shows the area that can
be shot for subjects at . However, the picture area
will move lower in the viewfinder as you get closer to
the subject. At 0.6 m (2ft), the shaded area is the
actual available image area. In this case, the subject
should be positioned below the close-up correction
marks.
24
USING THE FOCUS LOCK
To Avoid Taking Out-of-focus Pictures
When the main subject is not within the
autofocus mark. Use the focus lock.
The autofocus mark must be positioned on the subject in
this case, the camera will focus on the background behind
the subjects and the subjects will be but of focus.
Autofocus mark
Position the autofocus mark
on your
subject and press the shutter release
button halfway.
25
The green lamp lights.
Reposition your subjects in the picture
frame while keeping the shutter release
button depressed halfway. Then press
the shutter release button fully.
Difficult Autofocus Subjects
Glossy or reflective surfaces
Black objects
Subjects behind glass or wire mesh
Flames, smoke, etc.
Sunlight or excessively bright light within the picture
area
In such situation as the above, use the focus lock by
focusing on a different subject at a similar distance.
Then reposition the correct subject in the picture frame.
26
AFTER SHOOTING
Close the lens barrier slowly and
carefully. The lens will retract
automatically.
Close the lens barrier completely.
The display goes out.
Caution:
Do not apply force to the lens barrel.
27
UNLOADING THE FILM
The camera automatically rewinds the film when
you reach the end of a roll.
After the motor stops and starts blinking on the LCD
panel, open the back cover and remove the film.
Notes:
The number of exposures remaining decreases during
winding.
The final number of exposures may sometimes exceed the
number of exposures specified on the film.
Rewinding the film before the end of the roll
Press the mid-roll rewind button gently with your nail,
etc. Do not use an instrument with a sharp tip.
28
ADVANCED TECHNIQUES
USING THE FLASH MODES
This camera has five flash modes. Select the
flash mode according to your shooting
conditions and needs.
How to select the flash mode:
As you press the FLASH mode button, the mode
switches as shown on p. 30. The selected flash
mode is displayed on the LCD panel.
Do not discharge flash too close to eyes
of people or animals.
29
LCD Panel Display
AUTO mode:
Automatically fires in low-light and backlit conditions.
(p. 31)
AUTO-S mode:
Significantly reduces the phenomenon of "red-eye"
(when a subject's eyes appear red in flash photos).
(p. 32)
OFF mode:
The flash does not fire. (p. 33)
FILL-IN mode:
Fires regardless of available light. (p. 34)
mode:
Lights the subject in the foreground with a
nightscene in the background. (p. 35)
Notes
When the lens barrier is closed, AUTO-S will not be canceled.
All other modes will return to the AUTO mode.
In the Auto, Auto-S Flash, and
modes, the flash strength is
automatically controlled to prevent pictures from being
overexposed even when the subjects are close.
30
AUTO (Auto Flash)
In the Auto Flash mode, the flash will fire
automatically in low-light and backlit
conditions.
The orange lamp in the upper right of the viewfinder
lights when the shutter release button is depressed
halfway.
31
ISO
W (38 mm)
T (105 mm)
100
0.6 ~ 4.9m (2~16.1 ft)
0.6~2.5 m (2~8.2 ft)
200
0.6 ~ 6.9m (2~22.6 ft)
0.6~3.5m (2~11.5 ft)
400
0.6~9.8m (2~32.2 ft)
0.6~5.0m (2~16.4 ft)
Notes:
When the orange lamp is blinking, the flash is being recharged
and the shutter release button won't release. Release your
finger from the shutter release button, and wait for several
seconds.
Maximum distance is about 70% when using positive color film.
Flash Working Range (with color negative film)
AUTO-S (Red-Eye Reducing Flash)
Significantly reduces the phenomenon of
"red-eye" (when a subject's eyes appear
red in flash photography).
In the Auto-S Flash mode, the camera will emit a series
of low-power pre-flashes before the regular flash. This
makes the subject's pupils contract, significantly
reducing red-eye. Except for the pre-flashes, this mode
is the same as the Auto Flash mode.
Red-eye reduction may not be effective when the
subject.
1. Is not looking at the flash from the right front.
2. Is not watching the pre-flashes.
3. Is too far from the camera.
Does not respond to the pre-flashes due to
particular individual characteristics.
32
IMPORTANT Be sure to hold the camera still until the
shutter releases It takes about one second
OFF (Flash Override)
When you don't want the flash to fire even in
the dark or when you want to shoot such
subjects as fireworks.
In the Flash-OFF mode, the flash does not fire even in
low-light conditions. Use this mode in situations where
flash photography is not desired or is prohibited or in
twilight or night scenes.
Note: Since a slow shutter speed (down to 4 seconds) is
automatically selected in low-light situations when in the
Flash-OFF mode, the use of a tripod is recommended to
prevent blurred pictures caused by shaking the camera.
33
FILL-IN (Forced Activation)
When you want to fire the flash every shot.
In the FILL-IN Flash mode, the flash fires regardless of
available light. For example, this mode can be used to
brighten up a subject's shaded face or under artificial
lighting such as back-lit, fluorescent light. Use this
mode within the flash working range (p. 31).
It may be hard to work under the excessively bright
light.
34
NIGHT SCENE
TO CAPTURE A NIGHT SCENE BEAUTIFULLY
Use the Night-Scene Flash mode to properly
light the subject in the foreground while
leaving the background naturally lit.
Note: Since a slow shutter speed (down to 4 seconds)
is automatically selected in low-light situations, use a
tripod to prevent blurred pictures caused by camera
shake.
Night-Scene mode cannot be used together with Spot
mode.
35
SPOT MODE
TO FOCUS AND SET THE EXPOSURE FOR A SELECTED AREA.
Press the button and flash mode
button at the same time.
is displayed on the LCD panel.
Press the and the flash mode buttons at
the same time or close the lens barrier to
cancel the stop mode.
Position the autofocus mark
on your
subject, and press the shutter release
button halfway.
Make sure
The green lamp lights,
The exposure will be locked in the center of the
autofocus mark.
36
Reposition your subject in the picture
frame while keeping the shutter release
button depressed halfway. Then press
the shutter release button fully.
Exposure can be adjusted at different points
from the autofocus frame using the Spot
mode.
37
SELFTIMER/REMOTE CONTROL
See The Optional Remote Control's Instructions For More Details.
Use a tripod, etc., to hold the camera
securely. Press the selftimer/remote
control button, is displayed on the
LCD panel.
Aim at your subject, and press the
shutter release button. The shutter will
be released about 12 sec. later.
10 sec.: Selftimer indicator lights
2 sec.: Blinks
38
Notes:
The shutter can also be released using the optional remote
control (it takes about 3 sec.).
The focus and exposure will be locked when the shutter
release button is depressed halfway.
The selftimer is disengaged when the shutter is released.
To cancel the selftimer after it has been activated, press the
selftimer/remote control button again.
Optional
QUESTIONS AND ANSWERS
CAMERA MAINTENANCE
Q: How long will the battery last?
A: A new 3V lithium battery will last for roughly 15 rolls of
24-exposure film on which the flash was used on half
of all the shots (determined under Olympus test
conditions). If you do not use the flash and zoom very
often, the battery will last much longer.
Q: Why does the flash get hot?
A: If the flash is used continuously, it may become hot. If
this happens, stop using the camera for a while.
Q: Can I use infrared film?
A: No, you cannot.
Q: How should I clean the lens?
A: Wipe the lens gently with lens cleaning tissue that has
been moistened with a small amount of lens cleaning
fluid.
Q: Can I mount a filter or hood?
A: No, you cannot.
39
CARE AND STORAGE
Do not leave camera in any place exposed
to excessive heat, humidity, or direct sunlight
—for example. In a car or on the beach.
Do not expose the camera to formalin or
naphthalene.
If the camera gets wet, wipe it with a dry
towel as soon as possible. The salt in
seawater can be especially damaging.
Do not use organic solvents, such as alcohol
or paint thinner when cleaning the camera.
40
Do not leave the camera on or near a
television, refrigerator, or other appliance
with a magnetic field.
Do not expose the camera to dust or sand as
this could cause serious damage.
Do not shake or shock the camera.
Do not apply excessive force to the zoom
lens.
Please keep the camera in a well-ventilated place.
Do not expose the camera to extreme heat (over 40°C/104°F)
or to extreme cold (below -10°C/14°F). Low temperatures,
even within this range, may sometimes cause deterioration in
battery performance, temporarily disabling the camera.
41
When transporting the camera from a cold place to a warm
place or in the event of a sudden temperature change, put
the camera into a plastic bag. This allows the camera's
temperature to change slowly. Once the camera has
adjusted to the new temperature, you can remove it from the
bag and use it.
Keep your hair, hands, strap etc. away from the autofocus
window, lens, AE sensor and flash.
Avoid leaving the camera unused for long periods of time.
This can cause mold to grow on the camera as well as other
problems. Try to press the shutter release button and check
the operation of camera before use.
Some airport X-ray machines can damage the film in your
camera. Try to avoid passing your camera through these
machines. Give to the security officer for manual inspection.
This camera is controlled by a microcomputer. Problems with
the microcomputer can affect or stop camera operation. If
this happens, remove the batteries, then reload them and try
the camera again. Strong electrical fields can also interfere
with the operation of this camera so try to avoid places or
objects that generate such fields.
This camera is not suitable for professional use or for use
under severe conditions.
42
BATTERY HANDLING
NOTES
When the camera is not used for an
extended period of time, remove the battery.
Keep spare battery on hand when going on
a long trip or to a cold area.
Sweat, oil, and so on can prevent a battery's
terminals from making electrical contact. To
avoid this, wipe both terminals before
loading battery.
43
WARNINGS
NEVER TRY TO DISASSEMBLE, RECHARGE, OR
SHORT CIRCUIT BATTERY. NEVER EXPOSE
BATTERY TO EXCESSIVE HEAT OR OPEN
FLAMES.
KEEP THE BATTERY OUT OF THE REACH OF
CHILDREN. IF A CHILD SWALLOWS A BATTERY,
CONTACT A DOCTOR IMMEDIATELY.
USE ONE 3V LITHIUM BATTERY (DL 123A OR
CR123A). NEVER TRY TO DISASSEMBLE OR
MODIFY ANY BATTERY OR BATTERY PACK FOR
USE IN THIS CAMERA.
44
TROUBLESHOOTING
OPERATING PROBLEMS
The camera does not work.
The lens barrier is not opened.
Open the lens barrier completely, (p. 20)
The alignment of the battery terminals is not correct.
Reload the battery correctly, (p. 13)
The battery is exhausted.
Replace the battery with new one. (p. 14)
The battery is temporarily unable to function
because of cold.
Keep the camera warm while using it.
The loaded film has been rewound.
Remove the film. (p. 28)
The film is incorrectly loaded.
Reload the film. (p. 17)
45
The LCD display goes off suddenly.
If you don't use the camera, the LCD goes off after
four and half minutes.
Close the lens barrier and open it again or operate
the zoom lever to turn the LCD back on. In additon, the
power is turned OFF automatically after 4 hours. When
the camera is not in use, try to keep the lens barrier
closed.
46
The green lamp blinks, and the shutter release button
will not release.
The camera is closer than 0.6 m (2ft) to the
subject.
Move the camera back to distance more than
0.6 m (2ft) from the subject. (p. 23)
The orange lamp blinks, and the shutter release button
will not release.
The flash has not been recharged yet.
Remove your finger from the shutter release
button and wait for several seconds until the flash
is recharged before shooting. (p. 31)
The flash does not fire, even in the dark.
The flash mode is set to OFF.
Set it to a mode other than OFF. (p. 29)
High sensitivity film is being used.
Set the flash mode to FILL-IN. (p. 29)
47
The viewfinder is out of focus.
Diopter dial is not adjusted.
Adjust the diopter dial until image is clear. (p. 9)
PROBLEMS WITH PRINTED PICTURES
The picture is out of focus.
The camera moved when the shutter release
button was pressed.
Hold the camera correctly and press the shutter
release button gently. (p. 15)
The subject was not within the viewfinder's
autofocus mark.
Position the subject in the center of the
autofocus mark, or use the focus lock. (p. 22)
The lens and autofocus windows were dirty.
Clean the lens and autofocus windows.
48
The autofocus window was blocked, such as by a
finger.
Hold the camera correctly, keeping your fingers
clear of the autofocus windows. (p. 15)
The subject was closer than the minimum working
distance to the lens (0.6 m/2 ft).
Shoot from more than 0.6 m (2ft) away from the
subject. (p. 23)
When using the selftimer, the shutter release
button was pressed while standing right in front of
the camera.
Do not stand in front of the camera. Press the
shutter release button while looking through the
viewfinder. (p. 38)
49
The autofocus didn't work correctly. There are some
subject that are difficult for the autofocus to lock on.
These include: glossy or reflective surfaces, black
objects, subjects behind glass or wire mesh, flames
and smoke, excessively bright light within the picture
area.
First focus on an object at the same distance as the
desired subject. Then aim at the desired subject and
release the shutter release button. (p. 36)
The picture is too dark.
The flash was blocked, (e.g. by a finger).
Hold the camera correctly, keeping your fingers
clear of the flash. (p. 15)
The subject was out of the working range of the flash.
Shoot within the flash working range. (p. 31)
The flash mode was set to OFF.
Check the flash mode before shooting. (p. 29)
50
The color of a picture taken indoors is abnormal.
The color of the room lighting affected the picture
Set the flash to FILL-IN mode.
51
SPECIFICATIONS
Type: Full automatic 35 mm autofocus lens-shutter
camera with built-in 38 ~ 105 mm zoom lens.
Film format: 35 mm standard DX-coded film (24 x 36
mm)
Lens: Olympus lens 38 ~ 105 mm. F4.5 ~ 8.9,
6 elements in 5 groups.
Shutter: Programmed electronic shutter.
Viewfinder: Real image zoom viewfinder (with
autofocus mark, close-up correction marks,
autofocus indicator and flash indicator).
Focusing: Active-type autofocus system. Focus look
possible. Focusing range: 0.6 m (2ft) ~
(infinity).
Exposure control: Programmed automatic exposure
control, 3-zone light metering, switchable to spot
metering. Auto exposure range: Wide-angle —
EV2.3 (F4.5, 4 sec.) to EV16 (F10.9, 1/500 sec.),
Telephoto — EV4.3 (F8.9, 4 sec.) to EV17 (F19.7,
1/350 sec.).
52
Exposure counter: Progressive type with automatic
reset, displayed on LCD panel.
Selftimer: Electronic selftimer 12-sec. delay.
Film speed range: Automatic setting with DX-coded
film with ISO 50, 100, 200, 400, 800, 1600, 3200.
Film speeds other than the above will be
automatically set to the next lower speed. For
non DX-coded film and film with less than ISO
50, film speed is set to ISO 100.
Film loading: Automatic loading. (Automatically
advances to first frame when camera back cover
is closed.)
Film advance: Automatic film winding.
Film rewind: Automatic film rewind (automatic rewind
activation at end of film, automatic rewind stop).
Rewind possible at any point with rewind button.
53
Flash: Recycling time: Approx. 0.5 ~ 7 sec. (at normal
temperature with new battery). Flash working
range: Wide-angle — 0.6 ~ 4.9 m (2 ~ 16.1 ft),
Telephoto — 0.6 ~ 2.5 m (2 ~ 8.2 ft) with ISO 100
color negative film: Wide-angle — 0.6 ~ 9.8 m (2
~ 32.2 ft). Telephoto — 0.6 ~ 5.0 m (2 - 16.4 ft)
with ISO 400 color negative film.
Flash modes: AUTO (Automatic flash activation in lowlight and backlight), AUTO-S (Red-eye reducing,
otherwise same as auto), OFF (No flash), FILL-IN
(Forced activation),
(for night scene with
slowest shutter speed of 4 sec. Other functions
operate as the same as in Auto mode.)
Battery check: Displayed on LCD panel.
54
Power source: 3 V lithium battery (DL123A/CR123A)
Dimensions: 122(W) x 66 (H) x 45 (D) mm
(4.8X2.6X1.8 in) (without protrusions).
Weight: 245 g (8.6 oz)(without battery)
SPECIFICATIONS ARE SUBJECT TO CHANGE
WITHOUT ANY NOTICE OR OBLIGATION ON THE
PART OF THE MANUFACTURER.
55
OLYMPUS
OLYMPUS OPTICAL CO..LTD.
San-Ei Building, 22-2, Nishi Shinjuku 1 -chome, Shinjuku-ku, Tokyo, Japan. Tel. 03-3340-2211
OLYMPUS AMERICA INC.
Two Corporate Center Drive, Melville, NY 11747-3157, U.S.A.Tel. 516-844-5000 /1-800-622-6372
OLYMPUS OPTICAL CO.(EUROPA) GMBH.
(Premises/Goods delivery) Wendenstrasse 14-16, 20097 Hamburg, Germany. Tel. 040-237730
(Letters) Postfach 10 49 08, 20034 Hamburg, Germany.
OLYMPUS OPTICAL CO.(U.K.) LTD.
2-8 Honduras Street, London EC1YOTX, United Kingdom.Tel. 0171-253-2772
This device complies with part 15 of the FCC Rules. Operation is subject
to the conditions that this device does not cause harmful interference.
This Class B digital apparatus meets all requirements of the Canadian interference-Causing Equipment Regulations.
Cet appareil numéerique de la classe B respecte toutes les exigences du Rèeglement sur le mate
é riel brouilleur du Canada.
CZ9362
0898.09MC A0398
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising