Optimus CD-3840 Portable CD Player User Manual

Optimus CD-3840 Portable CD Player User Manual
42-5098.fm Page 1 Wednesday, January 19, 2000 4:03 PM
Cat. No. 42-5098
OWNER’S MANUAL
Please read before using this equipment.
CD-3840
Portable CD Player with 40 Second
Super Anti-Shock and PLL AM/FM Tuner
42-5098.fm Page 2 Wednesday, January 19, 2000 4:03 PM
FEATURES
Your Optimus Portable CD Player uses
the latest digital audio technology to
give you the clean, crisp sound of compact discs. You can connect the CD
player to amplified speakers or your
home or car audio system, or connect a
pair of stereo headphones for portable,
private listening.
Important: You need a pair of stereo
headphones, amplified speakers, or a
home audio or car stereo system to use
your CD player. Your local RadioShack
store carries a complete line of these
items.
The CD player's features include:
Super Anti-Shock System (SAS) —
rapidly scans 40 seconds of data from
the CD and stores it in memory for uninterrupted play with no sound skip even
when the CD player is exposed to
shocks or vibration. This makes this CD
player excellent for use in your vehicle.
AM/FM Radio with 20-Station Memory — lets you store up to 20 radio stations (15 FM and 5 AM) in memory, so
you can quickly tune to a stored station.
Backlit Display — lets you see the system’s status, even in the dark.
E-Bass System — creates a fuller bass
sound.
Programmable Play — lets you program and play up to 22 tracks in any sequence you choose.
Repeat Play — lets you automatically
repeat a single track, a programmed sequence, or an entire CD.
Intro Scan — helps you locate a desired track by automatically playing the
first 10 seconds of each track on the
CD.
Random Play — lets you play the
tracks on a CD in random order.
Eight-Times Oversampling with Digital Filtering — improves the CD’s
sound by multiplying the standard 44.1
kHz sample rate by 8 and using a digital
filter to reduce or eliminate distortion.
1-Bit DAC — uses the latest in digitalto-analog conversion circuitry to accurately reproduce all sound levels with
virtually no distortion.
Built-In Battery Charger — automatically charges rechargeable batteries inside the player when you connect an
AC or DC adapter.
Automatic Search Music System
(ASMS) — lets you quickly locate and
play any track on a CD.
© 1999 Tandy Corporation.
All Rights Reserved.
Optimus, RadioShack, and Adaptaplug are registered trademarks used by Tandy Corporation.
2
42-5098.fm Page 3 Wednesday, January 19, 2000 4:03 PM
Audible Search and Skip Function —
helps you locate a particular section of a
track by rapidly playing the CD in either
direction.
CDs that can be played on this CD player have this mark on them:
Pause — lets you temporarily stop play.
Hold — helps prevent accidentally
changing the CD player's settings and
preserves battery life by locking most
controls when you turn off the CD player.
The CD player’s advanced technology
makes it simple to operate. But, be sure
you read this Owner’s Manual completely so you can take advantage of all
its advanced features.
Auto Power Off — automatically turns
the CD player off when you stop play or
30 seconds after the CD finishes playing.
This CD player is made and tested to
meet exacting safety standards. It
meets FCC requirements and complies
with safety performance standards of
the U.S. Department of Health and Human Services.
Three Power Sources — let you power
your CD player from two AA batteries
(not supplied), standard AC power, or
vehicle battery power (using an optional
AC or DC adapter).
Warnings:
3-Inch CD Compatible — lets you play
3-inch CDs.
• This CD player employs a laser light
beam. Only a qualified service person should remove the cover or
attempt to service this device, due
to possible eye injury.
Automatic Tuning — searches forward
or backward to the next strong station in
the selected band so you can quickly
find new stations.
• The use of controls, adjustments, or
procedures other than those specified herein might result in hazardous radiation exposure.
Memory Tuning — lets you select a
preset AM or FM station.
Stereo/Mono Switch — lets you select
mono or stereo mode when listening in
the FM band.
3
42-5098.fm Page 4 Wednesday, January 19, 2000 4:03 PM
FCC INFORMATION
This equipment complies with the limits
for a Class B digital device as specified
in Part 15 of FCC Rules. These limits
provide reasonable protection against
radio and TV interference in a residential area. However, your CD player
might cause TV or radio interference
even when it is operating properly. To
eliminate interference, you can try one
or more of the following corrective measures:
• Increase the distance between the
CD player and the radio or TV.
• Use outlets on different electrical
circuits for the CD player and the
radio or TV.
Consult your local RadioShack store if
the problem still exists.
4
42-5098.fm Page 5 Wednesday, January 19, 2000 4:03 PM
CONTENTS
Powering the CD PLayer ......................................................................................
Using Batteries .................................................................................................
Charging Rechargeable Batteries .............................................................
Using AC Power ...............................................................................................
Using Vehicle Battery Power ............................................................................
6
6
6
7
8
Making the Connections ......................................................................................
Connecting Earphones or Headphones ...........................................................
Listening Safely .........................................................................................
Traffic Safety ..............................................................................................
9
9
9
9
Operation ............................................................................................................. 10
Listening to the Radio .................................................................................... 10
Storing a Radio Station in Memory ........................................................... 11
Playing a CD ................................................................................................... 11
Super Anti-Shock System (SAS) ............................................................. 12
Skip and Audible Search ......................................................................... 12
Intro Scan ................................................................................................ 13
Repeat Play ............................................................................................. 13
Random Play ........................................................................................... 13
Programmed Play .................................................................................... 14
Troubleshooting ................................................................................................. 15
Care and Maintenance ....................................................................................... 17
CD Care Tips ................................................................................................. 18
Specifications ..................................................................................................... 19
5
42-5098.fm Page 6 Wednesday, January 19, 2000 4:03 PM
POWERING THE CD PLAYER
You can power your CD player from any
of these sources:
• two AA alkaline batteries (not supplied)
• two rechargeable AA nickel-cadmium batteries (not supplied)
• standard AC power using an AC
adapter (not supplied)
1. Press down and slide the battery
compartment cover in the direction
of the arrow and lift it off.
2. Place two AA batteries in the compartment as indicated by the polarity symbols (+ and –) marked inside.
3. Replace the cover.
When
flashes or the CD player
stops operating properly, replace the
batteries.
B ATT
• vehicle battery power using a DC
adapter (not supplied)
Note: Connecting an AC or DC adapter
to the CD player with non-rechargeable
batteries installed disconnects the
batteries.
USING BATTERIES
You can power your CD player from two
AA alkaline batteries or two AA rechargeable nickel-cadmium batteries.
Both types of batteries are available at
your local RadioShack store.
Cautions:
• Use only fresh batteries of the
required size and recommended
type.
• Do not mix old and new batteries,
different types of batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different
capacities.
Follow these steps to install the batteries.
6
Warning: Dispose of old batteries
promptly and properly. Do not burn or
bury them.
Caution: If you do not plan to use the
CD player for a month or more, remove
the batteries. Batteries can leak chemicals that can destroy electronic parts.
Charging Rechargeable
Batteries
This CD player can fully charge the recommended rechargeable nickel-cadmium batteries in about 17 hours. You can
play a CD while charging the nickelcadmium batteries; however, this will
cause the batteries to charge more
slowly.
42-5098.fm Page 7 Wednesday, January 19, 2000 4:03 PM
Follow these steps to charge rechargeable batteries.
1. Connect an optional AC or DC
adapter to the CD player’s DC IN
4.5V jack (see “Using AC Power” or
“Using Vehicle Battery Power” on
Page 8).
USING AC POWER
You can power the CD player using an
4.5-volt, 600-mA
AC adapter and a size
®
B Adaptaplug adapter (neither supplied). Both adapters are available at
your local RadioShack store.
Cautions:
You must use a Class 2
adapter that supplies 4.5
volts DC and delivers at
least 600 mA. Its center tip must be
set to positive and its plug must fit
the CD player's DC IN 4.5V jack. Using an adapter that does not meet
these specifications could damage
the CD player or the adapter.
!
2. After 17 hours, unplug the adapter
then disconnect it from the CD
player’s DC IN 4.5V jack.
Caution: Do not overcharge the batteries. Overcharging can significantly reduce the batteries' useful life.
22
1-
Important: This CD
player can use nickelcadmium rechargeable
batteries. At the end of a
80
0-8 4 3-74
nickel-cadmium
battery's useful life, it must
be recycled or disposed of properly.
Contact your local, county, or state hazardous waste management authorities
for information on recycling or disposal
programs in your area or call 1-800843-7422. Some options that might be
available are: municipal curbside collection, drop-off boxes at retailers such as
your local RadioShack store, recycling
collection centers, and mail-back programs.
• Always connect the AC adapter to
the CD player before you connect it
to AC power. When you finish, disconnect the adapter from AC power
before you disconnect it from the
CD player.
Follow these steps to connect the CD
player to AC power.
1. Insert the recommended Adaptaplug adapter into the AC adapter’s
cord, setting TIP to + (positive).
2. Set the AC adapter’s voltage switch
to 4.5V.
3. Insert the AC adapter’s barrel plug
into the CD player’s DC IN 4.5V jack.
4. Plug the other end of the adapter
into a standard AC outlet.
7
42-5098.fm Page 8 Wednesday, January 19, 2000 4:03 PM
5. When you finish using the AC
adapter, disconnect it from the AC
outlet first, then unplug it from the
CD player.
Note: Always unplug the AC adapter
before using the CD player with alkaline
batteries. Otherwise the player will not
operate.
Follow these steps to connect the CD
player to vehicle battery power.
1. Insert the recommended Adaptaplug adapter into the DC adapter’s
cord, setting TIP to + (positive).
2. Set the DC adapter’s voltage switch
to 4.5V.
3. Insert the DC adapter’s barrel plug
into the CD player’s DC IN 4.5V jack.
USING VEHICLE
BATTERY POWER
4. Plug the other end of the adapter
into your vehicle's cigarette-lighter
socket.
You can power the CD player from a vehicle’s 12V power source (such as cigarette-lighter socket) using a 4.5-volt,
600-mA DC adapter and a size B
Adaptaplug adapter (neither supplied).
Both adapters are available at your local RadioShack store.
5. When you finish using the DC
adapter, disconnect it from the vehicle’s cigarette-lighter socket first,
then unplug it from the CD player.
Cautions:
You must use an adapter
that supplies 4.5 volts DC
and delivers at least 600
mA. Its center tip must be set to
positive and its plug must fit the CD
player's DC IN 4.5V jack. Using an
adapter that does not meet these
specifications could damage the CD
player or the adapter.
!
• Always connect the DC adapter to
the CD player before you connect it
to the power source. When you finish, disconnect the adapter from the
power source before you disconnect it from the CD player.
8
Note: Always unplug the DC adapter
before using the CD player with alkaline
batteries. Otherwise the player will not
operate.
42-5098.fm Page 9 Wednesday, January 19, 2000 4:03 PM
MAKING THE CONNECTIONS
You can listen to your CD player by
connecting earphones, headphones, or
amplified speakers to the player’s
PHONES jack, or by connecting a home
audio or autosound system to the CD
player’s LINE OUT jack.
PHONES
NES
PHO
OUT
LINE
VOL
LINE OUT
Notes:
• If the jacks on your equipment do
not match the plugs on the supplied
Y-cable, check with your local
RadioShack store for the proper
cable adapter.
• If you use amplified speakers, connect them to the PHONES jack, not
LINE OUT. Otherwise, FM radio
reception might be weak or noisy.
CONNECTING
EARPHONES OR
HEADPHONES
For private listening, you can plug a pair
of stereo earphones or headphones
1
(not supplied) with a /8-inch (3.5-mm)
plug into the PHONES jack on the CD
player.
Listening Safely
To protect your hearing, follow these
guidelines when you use earphones or
headphones.
• Set the volume to the lowest setting
before you begin listening. After you
begin listening, adjust the volume to
a comfortable level.
• Do not listen at extremely high volume levels. Extended high-volume
listening can lead to permanent
hearing loss.
• Once you set the volume, do not
increase it. Over time, your ears
adapt to the volume level, so a volume level that does not cause discomfort might still damage your
hearing.
Traffic Safety
Do not wear earphones or headphones
while operating a motor vehicle or riding
a bicycle. This can create a traffic hazard and could be illegal in some areas.
Even though some earphones and
headphones let you hear some outside
sounds when listening at normal volume
levels, they still can present a traffic
hazard.
9
42-5098.fm Page 10 Wednesday, January 19, 2000 4:03 PM
OPERATION
LISTENING TO THE
RADIO
1. Repeatedly press TUNER ON/BAND
until the desired band (AM, FM1,
FM2, or FM3) appears.
Memory Tuning: Press one of the
five memory buttons (P1 through
P5) to directly select a preset station. You can set up to 20 presets
(see “Storing a Radio Station in
Memory” on Page 11).
Notes:
2. Rotate VOL to a comfortable listening level.
VOL
3. Use one of these methods to tune
to the desired station. The display
shows the tuned frequency.
Manual Tuning: Repeatedly press
TUNING + or – to tune up or down
the selected band. To tune the band
more quickly, hold down TUNING +
or –.
Automatic Tuning: Hold down
TUNING + or – for about two seconds, then quickly release it. The
CD player tunes up or down the
selected band, stopping at the next
station with a strong signal.
10
• The CD player has a built-in AM
antenna. For the best AM reception, rotate the CD player.
• The supplied Y-cable or an
optional earphones’ or headphones’ cord serves as an FM
antenna. For the best FM reception, fully uncoil the cord.
• When listening to an FM station
broadcasting in stereo, press
STEREO/MONO. ST appears. If
reception is poor or noisy, press
STEREO/MONO
again. MONO
appears. The sound is not in stereo,
but
reception
should
improve.
4. Press TUNER OFF to turn off the
radio.
42-5098.fm Page 11 Wednesday, January 19, 2000 4:03 PM
Storing a Radio Station in
Memory
You can store up to 20 stations (15 FM
and 5 AM) in memory — 5 each in AM,
FM1, FM2, and FM3.
1. Turn on the radio and tune the
desired band and station.
2. Hold down one of the memory buttons (P1 through P5) until PRESET
appears.
the CD lies flat in the compartment.
Then close the compartment cover.
Note: This CD player plays 3-inch
single CDs without an adapter.
3. Press PLAY/PAUSE. The CD player
turns on, 01 appears, the total
number of tracks and playing time
appear for about 2 seconds, then
Track 1 begins to play. The display
shows the current track number and
the playing time.
3. Repeat Steps 1 and 2 for each
memory button where you want to
store a station.
Note: To replace a stored station, simply store a new one in its place.
4. Adjust VOL to a comfortable listening level.
PLAYING A CD
Notes:
1. Slide OPEN in the direction of the
arrow to open the disc compartment.
• If you connected the CD player's
LINE OUT jack to your home
audio or autosound system, use
the volume controls on those systems.
• To enhance the bass sound, slide
E-BASS to ON. To return to normal sound, switch E-BASS to
OFF.
OPEN
E-BASS
2. Carefully handle the CD by its
edges and place it label side up
over the compartment's center hub.
Press gently on the CD's center so
• To temporarily stop play, press
PLAY/PAUSE. The playing time
flashes. To resume play, press
PLAY/PAUSE again.
11
42-5098.fm Page 12 Wednesday, January 19, 2000 4:03 PM
5. The CD plays to the end, then play
stops. You can press STOP/TUNER
OFF once to stop play sooner.
6. Be sure the CD has stopped spinning, then slide OPEN in the direction of the arrow to open the disc
compartment. Hold the edge of the
disc and gently press the center
hub, then remove the disc.
When the CD player is stopped for
about 30 seconds, the power automatically turns off. To turn it off sooner,
press STOP/TUNER OFF again.
Super Anti-Shock System
(SAS)
Your CD player contains special circuits
to overcome skipping problems caused
by shock or vibration. This means you
can listen to the CD player anywhere
you go or use it in your vehicle.
When you turn on the anti-shock system, the CD player continuously saves
the next 40 seconds of music in memory. During a shock or vibration that
would normally make a track skip or
pause, the CD player plays directly from
memory. If the player is subjected to
shocks of over 40 seconds duration,
12
some interruption of sound output will
occur. This is normal. The sound resumes once the shock subsides.
To turn on the anti-shock system, press
ANTI-SHOCK. If a CD is playing, the
sound mutes for about 1 second, then
appears.
To turn off the anti-shock system, press
ANTI-SHOCK again. The sound briefly
stops and
disappears.
Note: While the SAS system provides
for continuous sound output when the
CD player is subjected to shock or vibration, it will not correct errors arising
from the use of defective, scratched or
dirty discs.
Skip and Audible Search
Press SKIP/SEARCH
during play to
go to the beginning of the next track,
SKIP/SEARCH to return to the beginning of the current track, or
SKIP/SEARCH twice to return to the beginning of the previous track.
42-5098.fm Page 13 Wednesday, January 19, 2000 4:03 PM
SKIP/SEARCH or
Hold down
during play to rapidly search forward or
backward for a specific section of a
track. The CD plays at a lower volume
and a higher speed. The current track's
elapsed time appears.
Intro Scan
The Intro Scan feature automatically
plays the first 10 seconds of each track
on a CD.
• To start Intro Scan from the first
track, while the CD is stopped,
repeatedly press PLAY MODE until
Intr appears. Then press PLAY/
PAUSE.
Repeat Play
Your CD player can repeatedly play a
single track, a sequence of tracks (see
“Programmed Play” on Page 14), or an
entire CD.
During play, repeatedly press REPEAT/
ENTER. When REPEAT flashes, the
current track will be repeated. When
REPEAT appears steadily, all tracks on
the disc will be repeated.
To cancel repeat play, press REPEAT/
ENTER until REPEAT disappears.
Random Play
In random play, the CD player plays all
the tracks in random order once, then
automatically stops.
To start random play, repeatedly press
PLAY MODE until RND appears, then
press PLAY/PAUSE.
• To start Intro Scan from the beginning of the current track during play,
repeatedly press PLAY MODE until
Intr appears, then press SKIP/
SEARCH
.
• To start Intro Scan from the next
track during play, repeatedly press
PLAY MODE until Intr appears.
Then press SKIP/SEARCH
.
To resume normal play, press PLAY
Intr disappears.
To start random play from the current
track, repeatedly press PLAY MODE until
RND flashes. Random play begins after
the current track plays.
When all tracks on the disc have been
played, the player automatically stops.
To cancel random play sooner, press
PLAY MODE again to return to the normal play mode. RND disappears.
MODE so
13
42-5098.fm Page 14 Wednesday, January 19, 2000 4:03 PM
Programmed Play
You can program up to 22 tracks on a
CD to play in any order you choose.
Follow these steps to program and play
a sequence.
1. Repeatedly press PLAY MODE until
PROG flashes. 00 and P-01
appear and PROG flashes again.
SKIP/
2. Repeatedly press
SEARCH or
to display the number of the first track you want to program.
3. Press REPEAT/ENTER to store the
track number and go to the next
selection. The selection number
advances by one and the track
number returns to 00.
4. Repeat Steps 1–3 for each track
you want to program, up to 22
tracks.
5. To play the programmed sequence,
press PLAY/PAUSE.
6. To cancel programmed play, press
PLAY MODE until PROG disappears, or press STOP.
To erase the sequence, press STOP
twice to turn off the player, or open
the CD compartment cover.
14
42-5098.fm Page 15 Wednesday, January 19, 2000 4:03 PM
TROUBLESHOOTING
With proper care and handling, your CD player should give you years of trouble-free
service. However, if your CD player is not working properly, follow these suggestions
to see if you can eliminate the problem. If you still have a problem, take the CD player to your local RadioShack store for assistance.
Problem
CD will not play
Possible Cause
Solution
CD is upside down
Reinstall the CD label side
up.
CD is not seated snugly on
compartment’s center hub
Gently press down on the
CD.
Dirty or defective CD
Clean or replace the CD.
Dirty pickup lens
Use a CD lens cleaning kit
(available at your local
RadioShack store) to clean
the lens.
Player lid is not closed
Press down on the lid.
Moisture/Condensation
Allow the player to warm up
to room temperature for 60
minutes.
AC power to adapter
switched off
Switch on the AC power.
Weak batteries
Replace the batteries or
charge rechargeable batteries.
The CD player has automatically turned off
Press PLAY to restore
power.
No sound from headphones
The headphones’ plug is
not firmly inserted in the
PHONES jack, or headphones are connected to
the LINE OUT jack
Insert the headphones’ plug
firmly into the PHONES
jack.
No sound or intermittent
sound when played through
an external audio system
CD player is subject to
excessive vibration or shock
Place the CD player on a
stable surface.
15
42-5098.fm Page 16 Wednesday, January 19, 2000 4:03 PM
Problem
Noisy or distorted radio
reception
Possible Cause
Solution
Station not tuned properly
Retune the station.
Antenna needs adjustment
Turn the CD player for best
AM reception.
Adjust the FM antenna
(headphone cord).
16
42-5098.fm Page 17 Wednesday, January 19, 2000 4:03 PM
CARE AND MAINTENANCE
Your Optimus Portable CD Player is an example of superior design and craftsmanship. The following suggestions will help you care for your CD player so you
can enjoy it for years.
Keep the CD player dry. If it gets wet, wipe it dry immediately. Liquids
might contain minerals that can corrode the electronic circuits.
Use and store the CD player only in normal temperature environments. Temperature extremes can shorten the life of electronic devices, damage batteries, and distort or melt plastic parts.
Keep the CD player away from dust and dirt, which can cause premature wear of parts.
Handle the CD player gently and carefully. Dropping it can damage
circuit boards and cases and can cause the CD player to work improperly.
Use only fresh batteries of the required size and recommended type.
Batteries can leak chemicals that damage your CD player’s electronic
parts.
Wipe the CD player with a damp cloth occasionally to keep it looking
new. Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the CD player.
Modifying or tampering with the CD player’s internal components can cause a
malfunction and might invalidate its warranty and void your FCC authorization to
operate it. If your CD player is not performing as it should, take it to your local RadioShack store for assistance.
17
42-5098.fm Page 18 Wednesday, January 19, 2000 4:03 PM
CD CARE TIPS
• Do not place anything but a CD in
the disc compartment. Doing so can
damage the drive mechanism.
• During playback, a severe shock or
jolt could make the CD's rotation
speed change suddenly and produce some noise. This is not a malfunction.
• Always handle a CD by its edges
and keep it in its protective case or
sleeve when it is not in use. Fingerprints and scratches on the CD's
surface can prevent the laser beam
from correctly reading the digital
information. To clean the CD, use a
CD cleaner kit.
• A scratch on the CD's surface can
make the CD skip or stop playing. If
the CD gets scratched, use
RadioShack Scratch ’n Fix to repair
the scratch.
• Keep CDs dry. A water drop can act
as a lens and affect the laser beam
focus.
18
42-5098.fm Page 19 Wednesday, January 19, 2000 4:03 PM
SPECIFICATIONS
Frequency Response (±3 dB) ............................................................. 20–20,000 Hz
Line Output ....................................................................................................... 0.6 V
Sampling Frequency ................................................................................... 44.1 kHz
Oversampling ............................................................................................... 8 Times
Wavelength ................................................................................................... 780 nm
Power Requirements ................................................................................... DC 4.5V
Two AA Alkaline or Rechargeable Nickel-Cadmium Batteries
Optional AC or DC Adapter (Not Supplied)
Power Consumption ............................................................................................ 8 W
Battery Life ................................................................................................... 8 Hours
Dimensions (HWD) ............................ 61/5 × 51/10 × 13/10 Inches (153 × 131 × 34 mm)
Weight (without batteries) ............................................................... 296 g (10.44 oz)
Weight (with batteries) .................................................................... 330 g (11.64 oz)
Included Accessory ..................................................................................... Y-Cable
Specifications are typical; individual units might vary. Specifications are subject to
change and improvement without notice.
19
42-5098.fm Page 20 Wednesday, January 19, 2000 4:03 PM
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack companyowned stores and authorized RadioShack franchisees and dealers. EXCEPT AS PROVIDED
HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES,
INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE,
ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES
CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN, RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE CAUSED DIRECTLY OR INDIRECTLY BY USE
OR PERFORMANCE OF THE PRODUCT OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA, PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT,
SPECIAL, INCIDENTAL, OR CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion of incidental or consequential damages, so the above limitations or exclusions may not apply to you.
In the event of a product defect during the warranty period, take the product and the RadioShack
sales receipt as proof of purchase date to any RadioShack store. RadioShack will, at its option, unless otherwise provided by law: (a) correct the defect by product repair without charge for parts and
labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase
price. All replaced parts and products, and products on which a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of
warranty service. Repaired or replaced parts and products are warranted for the remainder of the
original warranty period. You will be charged for repair or replacement of the product made after the
expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God, abuse,
accident, misuse, improper or abnormal usage, failure to follow instructions, improper installation or
maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs
other than those provided by a RadioShack Authorized Service Facility; (c) consumables such as
fuses or batteries; (d) cosmetic damage; (e) transportation, shipping or insurance costs; or (f) costs
of product removal, installation, set-up service adjustment or reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary from
state to state.
RadioShack Customer Relations, 200 Taylor Street, 6th Floor, Fort Worth, TX 76102
We Service What We Sell
04/99
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
11A99
Printed in Hong Kong
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement