Optimus SCP-98 Cassette Player User Manual

Optimus SCP-98 Cassette Player User Manual
14-1245.fm Page 1 Monday, January 29, 2001 10:03 AM
Cat. No. 14-1245
OWNER’S MANUAL
Please read before using this equipment.
SCP-98
AM/FM Stereo
Cassette Player
14-1245.fm Page 2 Monday, January 29, 2001 10:03 AM
FEATURES
Your Optimus SCP-98 AM/FM Stereo Cassette Player delivers excellent sound from radio broadcasts or your favorite cassette tapes, through optional speakers or stereo headphones.
The digital tuner’s PLL (Phase-Locked Loop) circuitry gives
you precise tuning and drift-free reception.
Its features include:
Auto-Stop Cassette Deck — automatically stops the tape
when it reaches the end, reducing wear on your tape and the
cassette deck.
Liquid Crystal Display with Clock and Alarm — shows the
current time and lets you set the SCP-98 to sound an alarm at
the time you select.
20-Station Memory — lets you store up to 20 radio stations
(10 FM and 10 AM) in memory so you can quickly tune to a
stored station.
E-BASS — so you can boost the bass sounds.
Three Power Options — you can power the SCP-98 from internal batteries (not supplied), a standard AC outlet (with an
optional AC adapter), or your vehicle’s cigarette-lighter socket
(with an optional DC adapter).
© 1998 Tandy Corporation.
All Rights Reserved.
Optimus and RadioShack are registered trademarks
used by Tandy Corporation.
2
14-1245.fm Page 3 Monday, January 29, 2001 10:03 AM
PHONES Jack — lets you connect headphones for private listening, or speakers to share the sound with others.
Seek Tuning — searches forward or backward to the next
strong station in the selected band so you can quickly find new
stations.
Lock — lets you lock the SCP-98’s controls to avoid accidentally changing the station you are listening to, replacing a
stored station, or setting the time or alarm.
Removable Belt Clip — lets you attach the SCP-98 to your
belt for hands-free carrying almost anywhere you go.
Note: To listen to your cassette player, you need a pair of
headphones or speakers with a 1/8-inch plug. Your local
RadioShack store sells a wide variety of headphones and
speakers.
3
14-1245.fm Page 4 Monday, January 29, 2001 10:03 AM
CONTENTS
Preparation ........................................................................ 5
Using Internal Battery Power ....................................... 5
Using Standard AC Power ............................................ 7
Using Vehicle Battery Power ........................................ 8
Connecting Headphones/Speakers ........................... 10
Listening Safely ................................................... 11
Traffic Safety ....................................................... 11
Setting the Clock ........................................................ 12
Setting the 10kHz/9kHz Switch .................................. 14
Using the Belt Clip ...................................................... 15
Operation .........................................................................
Using the Radio ..........................................................
Listening to the Radio .........................................
Storing Radio Stations in Memory ......................
Tuning to a Memory Station ................................
Using the Cassette Player ..........................................
Using the Alarm .........................................................
Setting the Alarm Time .......................................
Turning the Alarm On/Off ....................................
Locking the SCP-98 ...................................................
16
16
16
18
20
20
23
24
25
26
Care and Maintenance ....................................................
Restoring Tape Tension and Sound Quality ...............
Cleaning the Tape-Handling Parts .............................
The FCC Wants You to Know .....................................
27
28
28
29
Specifications .................................................................. 31
4
14-1245.fm Page 5 Monday, January 29, 2001 10:03 AM
PREPARATION
You can power your SCP-98 from any of three power sources:
• Internal battery power
• Standard AC power (with an optional AC adapter)
• Vehicle battery power (with an optional DC adapter)
Note: Connecting an adapter disconnects internal batteries.
USING INTERNAL BATTERY POWER
You can power your SCP-98 from two AA batteries (not supplied). For the best performance, we recommend alkaline batteries, such as RadioShack Cat. No. 23-557. You can also use
rechargeable nickel-cadmium batteries (Cat. No. 23-125) with
a battery charger (Cat. No. 23-133).
(illus)
1. Press down on the battery compartment cover and slide
it in the direction of the arrow until it stops, then lift up the
curved edge of the cover (opposite the arrow).
Caution: The battery compartment cover is attached to
the SCP-98 by a hinge. Do not attempt to remove the
cover completely.
5
14-1245.fm Page 6 Monday, January 29, 2001 10:03 AM
2. Put the batteries into the compartment as indicated by
the polarity symbols (+ and –) marked inside, with the
back battery over the attached ribbon. 12:00 AM
appears.
Cautions:
• Use only fresh batteries of the required size and recommended type.
• Do not mix old and new batteries, different types of
batteries (standard, alkaline, or rechargeable), or
rechargeable batteries of different capacities.*
3. Close the cover.
When the SCP-98 stops operating properly, replace the batteries. To prevent stored stations from being lost, set STEREO/
MONO/TAPE to TAPE before replacing batteries.
Cautions:
• If you do not plan to use the SCP-98 with batteries for a
month or more, remove the batteries. Batteries can leak
chemicals that can destroy electronic parts.
• Dispose of old batteries promptly and properly. Do not
burn or bury them.
Notes:
• To easily remove the batteries, open the battery compartment cover and pull up the ribbon.
6
14-1245.fm Page 7 Monday, January 29, 2001 10:03 AM
• Your SCP-98 is capable of using rechargeable nickelcadmium batteries. At the end of a nickel-cadmium battery’s useful life, it must be recycled or disposed of properly. Contact your local, county, or state hazardous waste
management authorities for information on recycling or
disposal programs in your area. Some options that might
be available are: municipal curbside collection, drop-off
boxes at retailers such as your local RadioShack store,
recycling collection centers, and mail-back programs.
USING STANDARD AC POWER
You can power the SCP-98 from standard AC power using an
optional AC adapter, such as Cat. No. 273-1654.
Cautions:
• The recommended AC adapter supplies 3 volts and
delivers at least 300 milliamps. Its center tip is set to negative, and its plug correctly fits the SCP-98’s DC 3V jack.
Using an adapter that does not meet these specifications
could damage the SCP-98 or the adapter.
• Always plug the AC adapter into the SCP-98 before you
plug it into the AC outlet and always unplug it from the
AC outlet before you unplug it from the SCP-98.
7
14-1245.fm Page 8 Monday, January 29, 2001 10:03 AM
Follow these steps to power the SCP-98 from a standard AC
outlet.
(illus)
1. Set the AC adapter’s voltage switch to 3V.
2. Put the adapter’s 3.4 mm outer diameter/1.3 mm inner
diameter barrel plug onto the adapter cord’s small end so
it reads TIP–.
3. Insert the barrel plug into the SCP-98’s DC 3V jack.
4. Plug the AC adapter’s other end into a standard AC outlet. 12:00 AM appears.
USING VEHICLE BATTERY POWER
You can power the SCP-98 from a vehicle’s cigarette-lighter
socket using an optional DC adapter, such as Cat. No. 2701560 or 273-1810.
8
14-1245.fm Page 9 Monday, January 29, 2001 10:03 AM
Cautions:
• The recommended DC adapters supply 3 volts and
deliver at least 300 milliamps. Their center tips are set to
negative, and their plugs correctly fit the SCP-98’s DC 3V
jack. Using a DC adapter that does not meet these specifications could damage the SCP-98 or the adapter.
• Always plug the DC adapter into the SCP-98 before you
plug it into the vehicle’s cigarette-lighter socket, and
always unplug it from the cigarette-lighter before you
unplug it from the SCP-98.
• Unplug the adapter from your vehicle’s cigarette-lighter
socket when you turn off the ignition. This prevents your
vehicle’s battery from being drained if you leave the SCP98 on when you turn off the ignition.
Follow these steps to power the SCP-98 from your vehicle’s
battery power.
(illus -- add
callout line)
1. Set the adapter’s voltage switch to 3V.
9
14-1245.fm Page 10 Monday, January 29, 2001 10:03 AM
2. Put the 3.4 mm outer diameter/1.3 mm inner diameter
barrel plug onto the adapter cord’s smaller end so it
reads TIP–.
3. Insert the barrel plug into the SCP-98’s DC 3V jack.
4. Plug the DC adapter’s other end into the vehicle’s cigarette-lighter socket. 12:00 AM appears.
CONNECTING HEADPHONES/
SPEAKERS
To listen to the cassette player, you need a pair of stereo
headphones or amplified speakers with a 1/8-inch plug. Your
local RadioShack store sells a wide variety of headphones
and amplified speakers.
Insert the stereo headphones’ or speakers’ 1/8-inch stereo
plug into the SCP-98’s PHONES jack.
(illus)
10
14-1245.fm Page 11 Monday, January 29, 2001 10:03 AM
Listening Safely
To protect your hearing, follow these guidelines when you use
headphones.
• Set the volume to the lowest setting before putting on the
headphones. After you put on the headphones, adjust
the volume to a comfortable level.
• Do not listen at extremely high volume levels. Extended
high-volume listening can lead to permanent hearing
loss.
• Once you set the volume, do not increase it. Over time,
your ears adapt to the volume level, so a volume level
that does not cause discomfort might still damage your
hearing.
Traffic Safety
Do not wear headphones while operating a motor vehicle or
riding a bicycle. This can create a traffic hazard and could be
illegal in some areas.
Even though some headphones let you hear some outside
sounds when listening at normal volume levels, they still can
present a traffic hazard.
11
14-1245.fm Page 12 Monday, January 29, 2001 10:03 AM
SETTING THE CLOCK
1. Set STEREO/MONO/TAPE to TAPE. The display shows the
currently set time.
(illus)
Note: You can set the clock only when the radio is off.
2. Press MODE twice. The time flashes.
(illus)
Note: If you do not press ∨/HOUR or ∧/MINUTE within 10
seconds, the currently set time stops flashing and you
must press MODE twice again.
12
14-1245.fm Page 13 Monday, January 29, 2001 10:03 AM
3. Repeatedly press ∨/HOUR until the display shows the
correct hour. (To rapidly advance the hours, hold down
down ∨/HOUR.)
(illus)
4. Repeatedly press ∧/MINUTE until the display shows the
correct minute. (To rapidly advance the minutes, hold
down down ∧/MINUTE.)
(illus)
5. When the display shows the correct time, either press
MODE or wait until the display stops flashing.
13
14-1245.fm Page 14 Monday, January 29, 2001 10:03 AM
SETTING THE 10KHZ/9KHZ SWITCH
The 10kHz/9kHz switch on the back of the cassette compartment door is preset to 10kHz. At this setting, the SCP-98 displays the time in the 12-hour format and tunes frequencies in
increments of 10 kHz (AM) and 0.1 MHz (FM), which are standard in the United States.
In Europe and some other parts of the world, AM and FM frequencies are broadcast in increments of 9 kHz (AM) and 0.05
MHz (FM). If you use the SCP-98 in these countries, use a
pointed object, such as a straightened paper clip, to set 10kHz/
9kHz to 9kHz.
(illus)
Note: If you set 10kHz/9kHz to 9kHz, the time appears in the
24-hour format. For example, 1:00 PM appears as 13:00.
14
14-1245.fm Page 15 Monday, January 29, 2001 10:03 AM
USING THE BELT CLIP
To attach the supplied belt clip to the SCP-98, press the clip’s
three latches into the corresponding slots on the back of the
SCP-98. Then push the clip upward until it locks into place.
(illus)
To remove the belt clip, press down at the point where the clip
attaches to the SCP-98, slide the clip down until it stops, then
pull it out.
15
14-1245.fm Page 16 Monday, January 29, 2001 10:03 AM
OPERATION
USING THE RADIO
Listening to the Radio
Make sure that you have headphones or speakers connected
to the SCP-98.
Note: To protect your hearing, set – VOLUME + to its lowest
setting before you turn on the radio.
1. To turn on the radio, set STEREO/MONO/TAPE to STEREO
for stereo sound on FM stations. STEREO appears during FM stereo reception. Set STEREO/MONO/TAPE to
MONO for monaural reception.
(illus)
2. Adjust – VOLUME + to a comfortable listening level.
(illus)
16
14-1245.fm Page 17 Monday, January 29, 2001 10:03 AM
3. Press AM/FM so the display shows the desired band (AM
or FM).
(illus)
4. Tune to the desired station.
Manual Tuning: Repeatedly press ∨/HOUR or ∧/MINUTE
to tune up or down the selected band. To tune the band
more quickly, hold down down ∨/HOUR or ∧/MINUTE.
(illus)
Seek Tuning: hold down down ∨/HOUR or ∧/MINUTE for
about 1 second. The SCP-98 tunes up or down the
selected band, then stops at the next higher or lower station with a strong signal.
The display shows the selected frequency.
17
14-1245.fm Page 18 Monday, January 29, 2001 10:03 AM
Notes:
• The SCP-98 has a built-in AM antenna, and the headphones’ or speakers’ cord serves as an FM antenna.
For the best AM reception, rotate the SCP-98. For the
best FM reception, fully uncoil the headphones’ or
speakers’ cord.
• If FM stereo reception is poor or noisy, set STEREO/
MONO/TAPE to MONO. The sound is not in stereo, but
FM reception should improve.
5. Set E-BASS IN/OUT to IN for extra bass effect, or to OUT
to leave the bass sound unchanged.
(illus)
6. To turn off the radio, set STEREO/MONO/TAPE to TAPE.
Storing Radio Stations in Memory
Follow these steps to store up to 20 stations (10 FM and 10
AM) in memory.
1. Set STEREO/MONO/TAPE to STEREO or MONO.
2. Press AM/FM so the display shows the desired band (AM
or FM).
18
14-1245.fm Page 19 Monday, January 29, 2001 10:03 AM
3. Tune to the first station you want to store. The display
shows the selected frequency.
4. Press STORE. M flashes on the display.
(illus)
5. To store stations into memory locations 1–5, while M
flashes on the display, press a memory location button
(1–5) to store the current frequency into that memory
location. M stops flashing and the display shows the
selected frequency.
(illus)
To store stations into memory locations 6–10, while M
flashes on the display, press +5 then one of the memory
location buttons (1–5). This increases the selected memory location number by 5.
19
14-1245.fm Page 20 Monday, January 29, 2001 10:03 AM
(illus)
For example, if you press +5 then memory location button
2, the radio stores the frequency you selected into memory location 7.
Note: If you do not press a memory location button or +5
within about 10 seconds, M disappears from the display.
Start again from Step 1.
6. Tune to the next station you want to store, then repeat
Steps 4 and 5 for each frequency.
To delete a station you stored, simply store a new one in that
memory location.
Tuning to a Memory Station
To quickly tune to a stored station, press the memory button
(or +5 and the memory button) that corresponds to the location
you assigned it.
20
14-1245.fm Page 21 Monday, January 29, 2001 10:03 AM
USING THE CASSETTE PLAYER
Make sure that you have headphones or speakers connected
to the SCP-98. See “Connecting Headphones/Speakers” on
Page 10.
21
14-1245.fm Page 22 Monday, January 29, 2001 10:03 AM
Notes:
• To protect your hearing, set –VOLUME + to its lowest setting before you play a cassette tape.
• For the best performance, use only regular length (60- or
90-minute) cassette tapes. We do not recommend longplaying cassette tapes, such as C-120s, because they
are extremely thin and can easily tangle in the playback
mechanism.
1. Set STEREO/MONO/TAPE to TAPE.
(illus)
2. Pull open the cassette compartment door.
(illus)
22
14-1245.fm Page 23 Monday, January 29, 2001 10:03 AM
3. Take up any slack in the cassette tape by turning its hub
with your finger or a pencil.
(illus)
Cautions:
• If you do not remove excess slack, the tape might
become tangled in the play mechanism.
• Avoid touching the tape.
4. Slide the cassette tape into the guides inside the cassette compartment door with the tape’s open edge
toward the front, the side you want to hear facing out,
and the full reel to the right.
5. Close the door.
6. Press
to play the tape. The button locks down and
play begins.
(illus)
23
14-1245.fm Page 24 Monday, January 29, 2001 10:03 AM
7. Adjust – VOLUME + to a comfortable listening level.
8. Set E-BASS IN/OUT to IN for extra bass effect, or to OUT
to leave the bass sound unchanged.
9. To fast-forward the tape, press
.
locks and the
tape fast-forwards until it reaches the end of the tape or
you press
or . To rewind the tape, eject it, turn it
over, and press
.
(illus)
10. The tape automatically stops when it reaches the end. To
stop it sooner, press .
(illus)
USING THE ALARM
You can set the SCP-98 to automatically sound a beeping
alarm at a time you select.
24
14-1245.fm Page 25 Monday, January 29, 2001 10:03 AM
Setting the Alarm Time
1. Set STEREO/MONO/TAPE to TAPE. The display shows the
currently set time.
2. Press MODE once. AL (alarm) appears and the currently
set alarm time flashes.
Note: If you do not press ∨/HOUR or ∧/MINUTE within 10
seconds, AL and the currently set alarm time disappear
from the display.
3. Repeatedly press ∨/HOUR until the display shows the
correct alarm hour. To rapidly advance the hours, hold
down down ∨/HOUR.
(illus)
25
14-1245.fm Page 26 Monday, January 29, 2001 10:03 AM
4. Repeatedly press ∧/MINUTE until the display shows the
correct minute. To rapidly advance the minutes, hold
down ∧/MINUTE.
(illus)
5. When the display shows the correct alarm time, either:
• Press MODE. The currently set time flashes for 10 seconds then appears steadily, or
• Wait for about 10 seconds until the newly set alarm
time stops flashing. AL disappears from the display,
then the currently set time appears.
Turning the Alarm On/Off
To turn on the alarm, press ON/OFF once. AL appears.
At the preset alarm time, the alarm sounds for about 10 minutes, or until you press STOP. This stops the alarm beep, but
leaves the alarm set to sound again the next day at the set
time.
To turn off the alarm completely so it will not sound the next
day, press ON/OFF so AL disappears from the display.
26
14-1245.fm Page 27 Monday, January 29, 2001 10:03 AM
LOCKING THE SCP-98
You can lock the SCP-98 to prevent accidentally changing the
station you are listening to, replacing a stored station, or setting the time or alarm. When your settings are locked, LOCK
appears on the display and you cannot adjust the tuner or set
the clock or the alarm.
To lock or unlock your selected settings, hold down ALARM
STOP, then press MODE/LOCK.
(illus)
Note: You can still adjust the volume when the settings are
locked.
27
14-1245.fm Page 28 Monday, January 29, 2001 10:03 AM
CARE AND MAINTENANCE
Your Optimus SCP-98 AM/FM Stereo Cassette Player is an
example of superior design and craftsmanship. The following
suggestions will help you care for the SCP-98 so you can enjoy it for years.
Keep the SCP-98 dry. If it gets wet, wipe it dry immediately. Liquids might contain minerals that
can corrode the electronic circuits.
Use and store the SCP-98 only in normal temperature environments. Temperature extremes can
shorten the life of electronic devices, damage
batteries, and distort or melt plastic parts.
Keep the SCP-98 away from dust and dirt, which
can cause premature wear of parts.
Handle the SCP-98 gently and carefully. Dropping it can damage circuit boards and the case
and can cause the SCP-98 to work improperly.
Wipe the SCP-98 with a damp cloth occasionally
to keep it looking new. Do not use harsh chemicals, cleaning solvents, or strong detergents to
clean the SCP-98.
Modifying or tampering with the SCP-98’s internal components can cause a malfunction and might invalidate its warranty and void your FCC authorization to operate it. If your SCP98 is not performing as it should, take it to your local
RadioShack store for assistance.
28
14-1245.fm Page 29 Monday, January 29, 2001 10:03 AM
RESTORING TAPE TENSION AND
SOUND QUALITY
After you play a cassette several times, the tape might become tightly wound on the reels. This can cause playback
sound quality to deteriorate.
To restore the sound quality, fast-forward the tape from the
beginning to the end of one side, then turn the tape over and
fast-forward to the end again. Then loosen the tape reels by
gently tapping each side of the cassette’s outer shell on a flat
surface.
Caution: Be careful not to damage the cassette when tapping
it. Do not touch the exposed tape or allow any sharp objects
near the cassette.
CLEANING THE TAPE-HANDLING
PARTS
Dirt, dust, or particles of the tape’s coating can accumulate on
the tape heads and other parts that the tape touches. This can
greatly reduce the performance of the SCP-98. Use the following cleaning procedure after every 20 hours of operation.
1. Remove the batteries and disconnect any other power
source.
2. Open the cassette compartment door.
3. Press
to expose the tape-handling parts.
29
14-1245.fm Page 30 Monday, January 29, 2001 10:03 AM
4. Use a cotton swab dipped in denatured alcohol or tape
head cleaning solution to clean the play head, pinch
roller, tape guides, and capstan.
(illus)
Note: Your local RadioShack store has a complete line of
cassette deck cleaning supplies.
5. When you finish cleaning, press
sette compartment door.
and close the cas-
THE FCC WANTS YOU TO KNOW
Your SCP-98 AM/FM Stereo Cassette Player might cause TV
or radio interference even when it is operating properly. To determine whether the SCP-98 is causing the interference, turn
off the SCP-98. If the interference goes away, the SCP-98 is
causing it.
Try to eliminate the interference by:
• Moving the SCP-98 away from the TV or radio
• Connecting the SCP-98 to an outlet that is on a different
electrical circuit than the TV or radio
30
14-1245.fm Page 31 Monday, January 29, 2001 10:03 AM
• Contacting your local RadioShack store for help
If you cannot eliminate the interference, the FCC requires that
you stop using the SCP-98.
31
14-1245.fm Page 32 Monday, January 29, 2001 10:03 AM
SPECIFICATIONS
RADIO
Frequency Range
IF Rejection
Image Rejection
Selectivity
Signal-to-Noise Ratio
Stereo Separation
Usable Sensitivity
FM
88–108 MHz
49 dB
11 dB
15 dB
50 dB
25 dB
25 µV
AM
530–1710 kHz
50 dB
50 dB
22 dB
29 dB
—
1700 µV/m
CASSETTE PLAYER
Cassette Mechanism .......................................... Auto-stop
Wow and Flutter ......................................................... 0.4%
Signal-to-Noise Ratio ................................................ 40 dB
Separation ................................................................. 27 dB
Frequency Response (–3 dB) ......................... 70–5000 Hz
GENERAL
Power Requirements ...... DC 3V, 300 mA (2 AA Batteries)
DC Adapter (Cat. No. 270-1560 or 273-1810)
AC Adapter (Cat. No. 273-1654)
Speaker Output Impedance ................................... 6 Ohms
Dimensions (HWD) ........................ 33/8 × 5 1/8 × 1 5/8 Inches
(86.5 × 130 × 41 mm)
Weight ...................................................... 7.2 oz. (205 gm)
Specifications are typical; individual units might vary. Specifications are subject to change and improvement without notice.
32
14-1245.fm Page 33 Monday, January 29, 2001 10:03 AM
Limited Ninety-Day Warranty
This product is warranted by RadioShack against manufacturing defects in material and workmanship under normal use for ninety (90) days from the date of purchase from RadioShack
company-owned stores and authorized RadioShack franchisees and dealers. EXCEPT AS
PROVIDED HEREIN, RadioShack MAKES NO EXPRESS WARRANTIES AND ANY IMPLIED WARRANTIES, INCLUDING THOSE OF MERCHANTABILITY AND FITNESS FOR A
PARTICULAR PURPOSE, ARE LIMITED IN DURATION TO THE DURATION OF THE WRITTEN LIMITED WARRANTIES CONTAINED HEREIN. EXCEPT AS PROVIDED HEREIN,
RadioShack SHALL HAVE NO LIABILITY OR RESPONSIBILITY TO CUSTOMER OR ANY
OTHER PERSON OR ENTITY WITH RESPECT TO ANY LIABILITY, LOSS OR DAMAGE
CAUSED DIRECTLY OR INDIRECTLY BY USE OR PERFORMANCE OF THE PRODUCT
OR ARISING OUT OF ANY BREACH OF THIS WARRANTY, INCLUDING, BUT NOT LIMITED TO, ANY DAMAGES RESULTING FROM INCONVENIENCE, LOSS OF TIME, DATA,
PROPERTY, REVENUE, OR PROFIT OR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES, EVEN IF RadioShack HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Some states do not allow the limitations on how long an implied warranty lasts or the exclusion
of incidental or consequential damages, so the above limitations or exclusions may not apply
to you.
In the event of a product defect during the warranty period, take the product and the
RadioShack sales receipt as proof of purchase date to any RadioShack store. RadioShack
will, at its option, unless otherwise provided by law: (a) correct the defect by product repair
without charge for parts and labor; (b) replace the product with one of the same or similar design; or (c) refund the purchase price. All replaced parts and products, and products on which
a refund is made, become the property of RadioShack. New or reconditioned parts and products may be used in the performance of warranty service. Repaired or replaced parts and
products are warranted for the remainder of the original warranty period. You will be charged
for repair or replacement of the product made after the expiration of the warranty period.
This warranty does not cover: (a) damage or failure caused by or attributable to acts of God,
abuse, accident, misuse, improper or abnormal usage, failure to follow instructions, improper
installation or maintenance, alteration, lightning or other incidence of excess voltage or current; (b) any repairs other than those provided by a RadioShack Authorized Service Facility;
(c) consumables such as fuses or batteries; (d) cosmetic damage; (e) transportation, shipping
or insurance costs; or (f) costs of product removal, installation, set-up service adjustment or
reinstallation.
This warranty gives you specific legal rights, and you may also have other rights which vary
from state to state.
RadioShack Customer Relations, Dept. W, 100 Throckmorton St., Suite 600,
Fort Worth, TX 76102
We Service What We Sell
7A8
3/97
RadioShack
A Division of Tandy Corporation
Fort Worth, Texas 76102
Printed in Hong Kong
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement