Panasonic PV-27DF5 TV DVD Combo User Manual

Panasonic PV-27DF5 TV DVD Combo User Manual
Operating Instructions
(For Basic Operations)
Electronic Board
(elite Panaboard)
Model No.
UB-T781
UB-T781W
UB-T761
UB-T781
Stand is sold separately.
Installation Manual Included (for qualified service personnel)
• To assemble this unit, please refer to the Installation Manual on pages 37 through 60.
• Before operating this unit, please read these instructions completely and keep them carefully for future
reference.
• This unit is designed for installation by a qualified servicing dealer.
Installation performed by non-authorized individuals could cause safety-related problems with the operation of
this equipment.
For U.S.A. only:
• To locate the closest authorized dealer in your area, please call 1-800-449-8989.
Introduction
Introduction
Thank you for purchasing the Panasonic Electronic Board.
For optimum performance and safety, please read these instructions carefully.
Feature Highlights
By connecting the elite Panaboard to a computer and using a projector to display the contents of the
computer’s screen on the elite Panaboard, you can do the following.
Electronic Pen Features
• Manipulate objects on the computer screen by using the electronic pen as a mouse.
• Draw and erase lines on the computer screen by using the electronic pen.
• Save images of the computer screen that were created by drawing with the electronic pen.
elite Panaboard book
Use the elite Panaboard book software that supports elite Panaboard operations, such as writing, drawing,
attaching images and computer operations. This software lets you save the contents of the screen on your
computer and retrieve it for later use.
In-built USB Speaker
The elite Panaboard has an in-built USB speaker. Sound can be heard through the USB speaker when it
is connected to a computer.
USB Hub Features
The elite Panaboard comes with a 2-port USB hub as standard. By connecting equipment such as
scanners, printers, or external USB memory sources, you can use their respective features directly with
the elite Panaboard. Also, you can incorporate the external devices smoothly using the electronic pen.
Install-Free Kit (Optional Device)
By attaching this product to an elite Panaboard and turning the power on, you can activate the elite
Panaboard software. It is not necessary to install the elite Panaboard software on your computer.
Usage Scenarios
For Education
• Create an effective learning environment by projecting a variety of educational software onto the elite
Panaboard and, with the electronic pen, directly manipulate the software and write and draw on the
screen.
• With several tools at your disposal for aiding in explanations, such as illustration and marker tools, you
can keep students’ attention through a dynamic screen display.
• Draw your students’ interest by using the screen shade feature to show questions to students while
hiding the answers, and incrementally showing the rest of the screen.
• The teacher can prepare materials before class to display on the elite Panaboard.
For Business
• Visually communicate your product’s characteristics and create an appealing presentation of your
product by displaying images and using the electronic pen to highlight key points.
• Display the contents, including what you have written using the electronic pen, of the elite Panaboard
in your company in real time on a remote computer by using TV conferencing equipment.
2
Operating Instructions (For Basic Operations)
Introduction
Things you should keep a record of
Attach your sales receipt here
For your future reference
Date of purchase
Serial number
Dealer’s name
1
Dealer’s address
Dealer’s tel no.
About the Operating Instructions
There are 2 separate operating manuals for the elite Panaboard.
For Basic Operations
(this document)
Instructions for connecting and operating the elite Panaboard, as
well as instructions for installation construction.
For Software
(electronic documentation)
Instructions for the included elite Panaboard software and elite
Panaboard book. The manual "Operating Instructions (For
Software)" is located on the included CD-ROM. You can view the
"Operating Instructions (For Software)" after you install the elite
Panaboard Software on your computer. For details on viewing the
manual, see "Viewing the Electronic Documentation" (page 27).
Operating Instructions (For Basic Operations)
3
Introduction
Abbreviations
Windows® refers to the Microsoft® Windows® operating system.
Windows® 2000 refers to the Microsoft® Windows® 2000 operating system.
Windows® XP refers to the Microsoft® Windows® XP operating system.
Windows Vista® refers to the Microsoft® Windows Vista® operating system.
DirectX® refers to the Microsoft® DirectX® application programming interface.
Trademarks
•
•
•
•
•
Microsoft, Windows, Windows Vista, DirectX, and Windows Media are either registered trademarks or
trademarks of Microsoft Corporation in the United States and/or other countries.
IBM and AT are trademarks of International Business Machines Corporation in the United States, other
countries, or both.
Intel and Pentium are trademarks or registered trademarks of Intel Corporation in the United States and
other countries.
Adobe, Reader and Flash are either registered trademarks or trademarks of Adobe Systems Incorporated
in the United States and/or other countries.
All other trademarks identified herein are the property of their respective owners.
Federal Communications Commission Requirements
For United States Only
Note
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant
to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference when the equipment is operated in a commercial environment. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and used in accordance with the
instruction manual, may cause harmful interference to radio communications. Operation of this equipment
in a residential area is likely to cause harmful interference in which case the user will be required to correct
the interference at his own expense.
FCC Warning
To assure continued FCC compliance, the user must use only the provided power supply cord.
Also, any unauthorized changes or modifications to this equipment would void the user’s authority
to operate this device.
4
Operating Instructions (For Basic Operations)
Introduction
Warning about saving data
When the system storage device or any of its optional storage device is adversely effected by
operational errors, static electricity, electrical noise, vibration, dust or when the power has been cut off
due to malfunction, repair or inadvertently, the memory contents may be lost or changed. Before
operating the system, make a point of reading the precautionary notes in the Operating Instructions
and the help information, and observe them during operation.
Please observe carefully the following precaution:
•
Make absolutely sure that all important data is saved by back-up or the original is saved.
The manufacturer hereby declares that it cannot be held accountable for any loss or change in any
data stored on floppy disks, hard disks, optical disks, or other memory devices.
1
System Requirements
Computer
CPU
Operating System
Interface
Memory (RAM)
Hard Disk
IBM® PC/AT® or compatible with a CD-ROM drive
Intel® Pentium® 4 processor or later
Windows 2000 SP4 / Windows XP SP2 / Windows Vista
(64-bit editions are not supported.)
USB 2.0
256 MB or greater (Windows 2000 SP4)
512 MB or greater (Windows XP SP2)
512 MB or greater (Windows Vista)
Hard disk with at least 400 MB of free space (not including the space
required for saving files)
Note
•
•
•
•
•
•
•
•
To run the elite Panaboard software, Microsoft .NET Framework 2.0 or later and DirectX 7.0 or later
are required. When you install the elite Panaboard software on the CD-ROM, .NET Framework 2.0 will
be installed on your computer if it is not already installed.
The system requirements above do not meet the recommended specifications of all operating systems.
You must have Windows Media® Player 10 or later, or Adobe® Flash® Player installed to insert and play
back video.
Inserting and playing back video is not supported in Windows 2000 SP4.
The handwriting recognition feature is supported in Windows Vista Ultimate, Windows Vista Home
Premium, Windows Vista Business, and Windows XP Tablet PC Edition 2005.
For users of Windows 2000 SP4 or later, or Windows XP Professional: in order to use the handwriting
recognition feature, you will have to install the Tablet PC SDK and Microsoft Windows XP Tablet PC
Edition 2005 Recognizer Pack.
The handwriting recognition feature is not supported in Windows Vista Home Basic and Windows XP
Home Edition.
You must have enough available hard disk space in order to record and play back video.
Operating Instructions (For Basic Operations)
5
Introduction
Exemption of Liability
Panasonic Communications Co., Ltd. is not responsible for accidents or injuries caused by, but not limited to,
the following:
1. Altering the device or improper installation construction.
2. Using the device for purposes beyond its intended use.
3. Earthquake, fire, flood, tidal wave, hurricane, lightning or other natural phenomena.
4. Natural aging of the building or similar phenomena.
For FRG Users (For Germany Only)
Note
Machine noise information regulation - 3.GPSGV, the maximum sound pressure level is 70 dB(A)
or less, in conformity with EN ISO 7779.
This equipment is not for use at video display work stations according to BildscharbV.
6
Operating Instructions (For Basic Operations)
Table of Contents
Table of Contents
For Your Safety ........................................................................................8
For Your Safety .................................................................................................................8
For Users ...........................................................................................................................8
Safety Information (For United Kingdom Only) ............................................................11
Precautions ......................................................................................................................12
Warning Label .................................................................................................................13
Usage ......................................................................................................14
Included Accessories .....................................................................................................14
Names and Uses of the Parts .........................................................................................15
Connecting External Components ................................................................................18
Installing the elite Panaboard software ........................................................................22
Setting the Projector .......................................................................................................23
Setting Your System (Calibration) .................................................................................24
Starting the elite Panaboard software and Performing Calibration ...........................25
Uninstalling the elite Panaboard software ....................................................................26
Viewing the Electronic Documentation .........................................................................27
Download the Latest Software .......................................................................................27
Appendix .................................................................................................28
Daily Care .........................................................................................................................28
Cleaning the elite Panaboard .........................................................................................28
Replacing the Battery in the Electronic Pen ...................................................................28
Replacing the Penpoint of the Electronic Pen ................................................................29
Troubleshooting ..............................................................................................................30
Specifications ..................................................................................................................32
Supplies & Accessories ..................................................................................................36
Installation Manual .................................................................................37
Installation Manual (for qualified service personnel) ..................................................37
For Your Safety ...............................................................................................................37
Notice .............................................................................................................................37
Included Accessories .....................................................................................................39
Wall Mounting Construction ..........................................................................................41
Checking the Wall ..........................................................................................................41
Installing the Wall Mounting Plates ................................................................................42
Wall Types and Installation Procedures .........................................................................45
Stand Assembly (Sold Separately) ................................................................................47
Included Parts ................................................................................................................47
Assembly Instructions ....................................................................................................48
Assembly Instructions ....................................................................................................51
Preparing for Removing the elite Panaboard from Its Packaging ..................................51
Assembling the elite Panaboard .....................................................................................52
Confirming the elite Panaboard Operation ...................................................................57
Confirming the Interactive Features ...............................................................................57
Repackaging ....................................................................................................................58
Attaching the Install-Free Kit (Sold Separately) ...........................................................59
Attaching the Install-Free Kit ..........................................................................................59
Operating Instructions (For Basic Operations)
7
1
For Your Safety
For Your Safety
For Your Safety
To prevent severe injury and loss of life, read this
section carefully before using the unit to ensure proper
and safe operation of your unit.
•
This section explains the graphic symbols used in
this manual.
WARNING
Denotes a potential
hazard that could
result in serious
injury or death.
CAUTION
Denotes hazards
that could result in
minor injury or
damage to the unit.
These symbols are used to
alert operators to a specific
operating procedure that
must not be performed.
These symbols are used to
alert operators to a specific
operating procedure that
must be emphasized in
order to operate the unit
safely.
For Users
WARNING
Power and Ground Connection
The power source voltage of this unit is
listed on the nameplate. Only plug the
unit into an AC outlet with the proper
voltage. If you use a cord with an
unspecified current rating, the unit or
plug may emit smoke or become hot to
the touch.
When you operate this product, the
power outlet should be near the product
and easily accessible.
To ensure safe operation the power cord
supplied must be inserted into a standard
three-prong AC outlet which is effectively
grounded (earthed) through the normal
wiring.
The fact that the equipment operates
satisfactorily does not imply that the
power point is grounded (earthed) and
that the installation is completely safe.
For your safety, if in any doubt about the
effective grounding (earthing) of the
power point, consult a qualified
electrician.
If the plug cannot be inserted into the AC
outlet, contact a licensed electrician to
replace the AC outlet with a properly
grounded (earthed) one.
Do not defeat the grounding (earthing)
plug (ex. do not use a conversion plug).
8
Operating Instructions (For Basic Operations)
For Your Safety
Plug the power cord firmly into an AC
outlet. Otherwise, it can cause fire or
electric shock.
Installation and Relocation
Have the unit installed, removed and
disposed of only by qualified service
personnel.
Do not pull, bend, rest objects on, or
chafe the power cord and plug. Damage
to the power cord or plug can cause fire
or electric shock.
Do not attempt to repair the power cord,
or plug. If the power cord or plug is
damaged or frayed, contact an
authorized service representative for a
replacement.
When the unit will no longer be used, in
order to prevent it from falling, do not
leave the unit installed, but remove it. If
the unit falls, it can cause injury.
If metal fragments or water gets into the
unit, turn the unit off and unplug the unit
immediately. Contact your dealer for
service. Operating the contaminated unit
can cause fire or electric shock.
Ensure that the plug connection is free of
dust. In a damp environment, a
contaminated connector can draw a
significant amount of current that can
generate heat, and eventually cause fire
if left unattended over an extended
period of time.
Never open or remove unit covers that
are screwed with screws unless
specifically instructed in the "Operating
Instructions". A high-voltage component
can cause electric shock.
Never touch the plug with wet hands.
Danger of electric shock exists.
Stop operation immediately if the unit
emits smoke, excessive heat, abnormal
smell or unusual noise. These conditions
can cause fire or electric shock.
Immediately turn the unit off, and unplug
the power cord, and contact your dealer
for service.
When disconnecting the unit, grasp the
plug instead of the cord. Pulling on a cord
forcibly can damage it, and cause fire or
electric shock.
1
Operating Safeguards
Do not alter the unit or modify any parts.
Alteration or modification can cause fire
or electric shock.
CHOKING HAZARD
Keep the penpoint and battery out of
reach of children to prevent swallowing.
Battery
Use only the specified type of battery.
Using the incorrect type of battery can
result in overheating/burning or leakage
of battery acid.
During thunderstorms, do not touch the
unit and plug. It may cause an electric
shock.
Operating Instructions (For Basic Operations)
9
For Your Safety
Make sure that the battery is installed
with the correct polarity as indicated on
the battery holder. Incorrectly installed
batteries may burst or leak, resulting in
injuries.
Batteries that seem worn down or
damaged should not be used. Using
worn down or damaged batteries may
result in leaking.
Do not charge, short, heat, break or
throw in a fire, as it may result in the
battery leaking, generating heat, or
bursting.
When disposing of the battery, cover the
battery contacts with insulation (ex.
tape). Direct contact with other batteries
may result in leaking, fire, or explosion.
Do not solder the battery, as it may result
in the battery leaking, generating heat, or
bursting.
CAUTION
Power
When the unit is not used over an
extended period of time, switch it off and
unplug it. If an unused unit is left
connected to a power source for a long
period, degraded insulation may cause
electric shock, current leakage, or fire.
The unit should be used only with the
power cord enclosed with the unit.
Installation and Relocation
Do not position the unit in a location
where it is unstable.
Do not place the unit in a hot humid or
dusty environment. Prolonged exposure
to these adverse conditions may cause
fire or electric shock.
To prevent fire or shock hazard, do not
expose this unit to rain or any type of
moisture.
When moving the unit, be sure to unplug
the power cord from the AC outlet. If the
unit is moved with the power cord
attached, it can cause damage to the
cord which could result in fire or electric
shock.
Move this unit with two persons.
Otherwise, this unit may fall down and
cause injury.
10
Operating Instructions (For Basic Operations)
For Your Safety
After installing or moving the unit, lock
the casters and set the fall-prevention
extension legs.
Locking the casters
(Push this side)
Push to lock
Operating Safeguards
If the unit falls down or gets damaged,
turn the unit off and unplug the power
cord. Otherwise, it may cause fire or
electric shock.
Do not lean against the screen or on the
cover (lower), even if the unit is mounted
on the wall.
Safety Information (For
United Kingdom Only)
This appliance is supplied with a moulded three pin
mains plug for your safety and convenience.
A 5 amp fuse is fitted in this plug. Should the fuse need
to be replaced, please ensure that the replacement fuse
has a rating of 5 amps and that it is approved by ASTA
or BSI to BS1362. Check for the ASTA mark
or the
BSI mark on the body of the fuse. If the plug contains
a removable fuse cover, you must ensure that it is
refitted when the fuse is replaced. If you lose the fuse
cover, the plug must not be used until a replacement
cover is obtained. A replacement fuse cover can be
purchased from your local Panasonic Dealer.
IF THE FITTED MOULDED PLUG IS UNSUITABLE
FOR THE SOCKET OUTLET IN YOUR PREMISES,
THEN THE FUSE SHOULD BE REMOVED AND THE
PLUG CUT OFF AND DISPOSED OF SAFELY.
THERE IS A DANGER OF SEVERE ELECTRICAL
SHOCK IF THE CUT OFF PLUG IS INSERTED INTO
ANY 13 AMP SOCKET.
If a new plug is to be fitted, please observe the wiring
code as shown below. If in any doubt, please consult a
qualified electrician.
WARNING
This appliance must be earthed.
Battery
When the unit is not used over an
extended period of time, take the
batteries out of the unit. Otherwise, the
batteries may leak. Do not use the leaked
batteries.
IMPORTANT
The wires in this mains lead are coloured as
follows:
Green-and Yellow:
Earth
Blue:
Neutral
Brown:
Live
Operating Instructions (For Basic Operations)
11
1
For Your Safety
As the colours of the wire in the mains lead of this
apparatus may not correspond with the coloured
markings identifying the terminals in your plug,
proceed as follows.
The wire that is coloured GREEN-AND-YELLOW
must be connected to the terminal in the plug which
is marked with the letter E or by the Earth symbol
or coloured GREEN or GREEN-AND-YELLOW.
The wire that is coloured BLUE must be connected to
the terminal in the plug that is marked with the letter
N or coloured BLACK.
The wire that is coloured BROWN must be connected
to the terminal in the plug which is marked with the
letter L or coloured RED.
Precautions
About Using the Battery
If a battery is used improperly, the battery may leak,
causing corrosion of the unit, or it may burst. To prevent
this, always follow the precaution given below.
• If the electronic pen ceases to function because the
battery has run out, remove it immediately and
dispose of it according to local regulations.
Leaving a drained battery in the electronic pen may
result in leakage.
About Disposing of the Battery
For Brazil
How to replace the fuse:
Após o uso as pilhas / baterias
contidas neste produto poderão
ser dispostas em lixo doméstico.
Open the fuse
compartment with a
screwdriver and replace
the fuse and fuse cover.
For Netherlands
NL
Niet weggooien,
maar inleveren
als KCA.
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg ziju, moet u ze niet
weggooien maar inleveren als KCA.
For Taiwan
12
Operating Instructions (For Basic Operations)
For Your Safety
Warning Label
1
WARNING:
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
䄺
Ўњ䰆ℶ㾺⬉џᬙǃߛ࣓ᠧᓔᴎⲪDŽ
ᴎ఼‫ݙ‬䚼≵᳝⫼᠋㞾Ꮕৃҹ㓈ׂⱘ䚼ߚDŽ
㓈ׂџᅰࡵ䇋ྨᠬ᳝䌘Ḑⱘ㓈ׂҎਬDŽ
ਞ˖
PBQAA0582ZA
Operating Instructions (For Basic Operations)
13
Usage
Usage
Included Accessories
Check that all of the following items are included with your elite Panaboard.
In the event that an item is missing, please contact your dealer.
List of Accessories
Power Cord
(3 m [9 ft. 10 1/8 in.])
1
USB Cable
(5 m [16 ft. 4 7/8 in.])
1
Software CD-ROM
1
AAA Battery (LR03)
(Disposable)
1
Electronic Pen
1
Penpoint
(Replacement)
2
Operating Instructions
(For Basic Operations)
(this document)
1
Warranty
1
Note
•
•
•
•
The illustration of the power cord shown above is for the United States. The shape of the plug may
vary depending on country/area.
Stand is sold separately.
Store the extra penpoint along with this operating manual.
The warranty may not be included depending on country/area.
About Using the CD-ROM
To prevent damage to the CD-ROM:
• Do not touch or write on the surface of the disc.
• Do not leave the disc out of the protective case.
• Do not leave the disc in the direct sunlight or near heat sources.
• Do not place heavy objects on the disc case or drop the case.
• To clean the disc, hold the disc by its edges and wipe it from the center to the edges with a dry, soft
cloth.
14
Operating Instructions (For Basic Operations)
Usage
Names and Uses of the Parts
Screen
Front View
Position Sensor
Detects the position of the electronic pen. Do
not block the sensor while operating the elite
Panaboard.
Screen Board
Project the contents of a computer screen using a
projector.
1
Power Switch
Pen Tray
Push the center of the door to open the pen tray,
which can hold up to 2 electronic pens.
USB Speaker
Outputs sound from a computer or the audio input
port in stereo.
Volume Dial
Adjusts the volume of the speaker.
The volume indicator is set in the center when
shipped.
External Audio Input Port
Connect the audio output port of a VCR or DVD
player etc. to this port and hear sound through the
USB speaker.
Status LEDs
Left: Power LED (green)
Lights green when the power is on.
Right: Error LED (red)
Blinks red when an error occurs.
USB Hub (2 Ports)
You can connect external devices directly to the
elite Panaboard using these ports. (Page 20)
USB Port
Directly connect a computer using a USB cable
(included).
Operating Instructions (For Basic Operations)
15
Usage
Rear View
AC Inlet
Power Cord
Notice
•
•
•
The elite Panaboard is designed exclusively for projector images. Do not write on the screen board
with a white-board marker.
The operation of external devices connected via the USB hub is not guaranteed.
External devices connected via the USB hub that require a lot of power, such as scanners or CD/
CD-Rs, may not operate properly. For more information, please consult the relevant dealer.
Electronic Pen
Penpoint
When you push down on the penpoint, ultrasonic waves
and infrared signals are transmitted, and equivalent of a
left mouse click is performed.
Ultrasonic Emitter
Do not block this area with your fingers.
Doing so will prevent the elite Panaboard from correctly
detecting the electronic pen's position.
Infrared Emitter
Do not block this area with your fingers.
Doing so will prevent the elite Panaboard from correctly
detecting the electronic pen's position.
Pen Button
Performs the same function as a right-click with a mouse.
Battery Cover
16
Operating Instructions (For Basic Operations)
Usage
Notice
•
Use the electronic pen by holding it at a right angle to the screen board.
Holding it at an angle can cause its position to be read incorrectly.
•
•
Do not use multiple pens at the same time. This can result in erroneous operation.
Do not push the penpoint while holding the pen close to the elite Panaboard. Doing so can cause
erroneous behavior.
1
Note
•
•
•
The electronic pen switches to power-save mode after about 30 minutes.
When waking up the pen from power-save mode by pushing the penpoint, the pen’s reaction may be
slow.
When operating the electronic pen, you will hear a buzzing sound due to the pen emitting ultrasonic
waves for location detection. This sound does not have any negative effects for nearby people or
devices. It will not cause electrical shocks.
Inserting (Replacing) Batteries
1. Remove (replace) the battery cover.
•
When replacing the cover, follow the procedure in
reverse.
2. Insert (exchange) the battery and replace the
cover.
•
Make sure to use a AAA alkaline battery, and
ensure that
and
face the correct
directions.
Operating Instructions (For Basic Operations)
17
Usage
Connecting External Components
1. Set the power switch to "O" (OFF), connect the power cord (included) to the elite Panaboard, and
plug the power cord into an AC outlet.
Rear
Power Switch
(ON)
(OFF)
Power Cord
(Included)
Power Cord
•
•
Plug the power cord into an outlet that is close to the elite Panaboard and in a location that is
easy to unplug.
If you are using the optional stand, plug the power cord into the AC inlet, and secure the cord
as shown in the illustrations below.
When attaching the power cord
downward.
•
•
18
When attaching the power cord along the lower side of
the elite Panaboard.
About Grounding
If you cannot connect the grounding line, contact your dealer. The cost of installing a grounding
connection is not included in the price of the elite Panaboard.
The included power cord is exclusively for use with the elite Panaboard. Do not use it with any
other devices.
Operating Instructions (For Basic Operations)
Usage
2. Connect the elite Panaboard to a computer using the USB cable (included).
• elite Panaboard: Plug the B connector (smaller connector) into the elite Panaboard's USB port.
•
Computer: Plug the A connector (larger connector) into a USB port on the computer.
Do not connect the elite Panaboard via a USB hub. This could result in erroneous operation.
To USB Port
USB Cable
(Included)
1
Projector
Computer
AC
Video Cable
AC
3. Connect the computer to a projector.
• For instructions on connecting your computer and projector, refer to the respecting instruction manuals.
Operating Instructions (For Basic Operations)
19
Usage
Connecting External Devices
1. Connect the external device to the elite Panaboard using a USB cable (sold separately).
• elite Panaboard: Plug the A connector (larger connector) into the elite Panaboard’s USB port.
External device: Plug the B connector (smaller connector) into a USB port on the external device.
To USB Port
USB Cable
(Sold Separately)
MFP
To USB Port
Flatbed
Scanner
About the Usage Location
•
•
Do not place the elite Panaboard where it is directly exposed to sunlight, near a stove, near to a heating/
cooling vent or exposed to strong winds.
Do not use the elite Panaboard in a location less than 10 °C (50 °F) or in a location subject to extreme
changes in temperature.
Note
•
20
The elite Panaboard may not work properly when used in one of the above locations.
Operating Instructions (For Basic Operations)
Usage
Volume Control
•
The volume of the USB speaker on the elite Panaboard can be controlled using the Volume Dial, the volume
of Windows, and the volume of the application being used. To adjust the volume, use the Volume Dial, or
adjust the volume of the application.
Power Switch
•
After turning the elite Panaboard off, wait more than 2 seconds before turning it back on.
Moving the elite Panaboard When Using the Stand (Sold Separately)
1. Make sure that the power switch is set to "O" (OFF), and disconnect the power cord and USB cable.
2. Release the locks on the casters.
3. Move the elite Panaboard, avoid banging or shaking the board.
Notice
•
•
Always move the elite Panaboard with 2 people.
Do not drag or step on the cable.
4. Lock the casters.
Operating Instructions (For Basic Operations)
21
1
Usage
Installing the elite
Panaboard software
You need to install the elite Panaboard software on the
computer that will be used with the elite Panaboard.
To install the elite Panaboard software, follow the
procedure below.
Notice
•
•
6. When the following screen is displayed, confirm
that the USB cable is not connected to your
computer or the elite Panaboard, and click [OK].
• If the USB cable is connected to the elite
Panaboard, disconnect the cable, and click
[OK].
• If .NET Framework 2.0 or later is not installed,
an installation screen will be displayed. Follow
the on-screen directions to install these
components.
Do not connect the USB cable until the
installation is completed.
Do not connect more than 1 elite Panaboard to
the same computer.
(Doing so can cause erroneous behavior on the
computer.)
1. Turn on your computer and start the Windows
operating system.
• Log into an account with Administrator
privileges.
2. Insert the included CD-ROM into the CD-ROM
drive.
• The setup screen will be displayed.
• If the setup screen does not appear, select your
CD-ROM drive in Explorer and double-click
[Menu.exe].
• In Windows Vista, if the Autoplay dialog box is
displayed, click [Run Menu.exe].
3. When the "Welcome" screen has been
displayed, click [Next].
4. Click [Install elite Panaboard].
5. If you agree to the terms in the "License
Agreement", click [Yes].
• In Windows Vista, if the "User Account
Control" window is displayed, click [Continue] to
continue with the installation.
22
Operating Instructions (For Basic Operations)
7. When the installation wizard is displayed, follow
the on-screen instructions and continue with
the installation.
8. When installation has finished, click [Finish].
• Restart your computer if you are prompted to do
so.
• The group [elite Panaboard] will be created in
the [Panasonic] group in the program menu.
• The following items will appear in the [elite
Panaboard] group:
– elite Panaboard software
– elite Panaboard book
– Operating Instructions for Basic Operations
– Operating Instructions for Software
– Download the latest version
Usage
Project the Image as a Rectangle
Setting the Projector
•
Set up your projector as instructed below.
Adjust the location of the projector to project at a
right angle with the elite Panaboard.
About Positioning the Image
• When you are projecting an image, make sure that
the edge of the projected image is at least 5 mm
(1/4 in.) from the screen frame. The electronic pen
may not function correctly within 50 mm (2 in.) of the
position sensor in the upper-left corner of the screen
board.
UB-T781 / UB-T761
50 mm (2 in.)
1
5 mm (1/4 in.)
Projectable Area
5 mm
(1/4 in.)
5 mm (1/4 in.)
UB-T781W
50 mm (2 in.)
5 mm
(1/4 in.)
Projectable Area
5 mm
(1/4 in.)
5 mm (1/4 in.)
Operating Instructions (For Basic Operations)
23
Usage
•
If the image is projected trapezoidally, the
position of the electronic pen may not be read
correctly. Adjust the projector so that the
projected image is a rectangle. Refer to your
projector's documentation for information on
adjusting the projected image.
Setting Your System
(Calibration)
About Calibration
Calibration is setting up the elite Panaboard and
projector so that lines and comments drawn on the
screen board with the electronic pen will be correctly
displayed on the image projected onto the screen
board. Be sure to perform calibration before use.
After you have set up the elite Panaboard, project an
image onto the screen board and use the elite
Panaboard software installed on your computer to
perform calibration.
After Calibration
Do Not Move the elite Panaboard or the
Projector
• The position of projected image and electronic pen
Set the Proper Resolution
• Set your computer's and projector's resolutions to
the most appropriate setting.
If the resolution is not set properly, the image will be
difficult to see. Particularly, if the projector's
resolution is lower than the computer's, thin lines
can appear cut or broken. Refer to your projector's
documentation for information on adjusting the
resolution.
•
Do Not Look Directly into the Projector Lamp
• When using a projector, try to avoid looking directly
into the projector lamp. Doing so can hurt your eyes.
24
Operating Instructions (For Basic Operations)
•
will become misaligned in the following cases,
requiring you to re-calibrate their positions.
– The location of the projector changed.
– The location of the elite Panaboard changed.
– The image area or placement was changed due
to changes in the zoom, focus, etc.
– The resolution of the projector or the computer
changed.
If you are using the elite Panaboard installed on a
stand, be aware that accidentally hitting the elite
Panaboard or pushing too strongly with the
electronic pen while operating can move the stand's
position, which will result in misalignment of the
projected image and the electronic pen's position.
Make sure to lock the stand’s casters when using
the elite Panaboard, as failing to do so can cause
misalignment.
Usage
Starting the elite
Panaboard software and
Performing Calibration
1. Turn on the elite Panaboard.
2. Connect the elite Panaboard to your computer
with the USB cable.
• The elite Panaboard software starts
automatically.
• When you start the elite Panaboard software for
the first time, the calibration screen is displayed.
• Restart your computer if you are prompted to do
so. After the computer has restarted, connect
the elite Panaboard to your computer with the
USB cable.
3. Perform calibration.
4. Press the electronic pen at a right angle against
the board at the intersecting points of each
circle until it disappears (about 2 seconds).
Repeat in the order shown in the illustration
below.
A
B
•
•
•
•
Hold and press the electronic pen at a right
angle to the screen board.
When you push down on the penpoint, the
electronic pen makes a buzzing sound.
When the position of the indicated point has
been determined correctly, calibration
automatically moves to the next point.
When calibration has finished normally, a
completion dialog box is displayed.
1
5. Click [OK].
• If the elite Panaboard and projector are fixed so
that they will not move (Wall mounted case),
select the [Always use this calibration
information.] check box, and click [OK] to skip
calibration from the next time you start the elite
Panaboard software.
D
E
C
Operating Instructions (For Basic Operations)
25
Usage
•
After calibration has completed, the
icon
is displayed in the notification area, and the
Desktop Drawing Tool is automatically
displayed.
Uninstalling the elite
Panaboard software
If it is necessary to uninstall the elite Panaboard
software, follow the procedure below.
1. Turn on your computer and start Windows.
• Log into an account with Administrator
privileges.
2. Select [Add or Remove Programs] from the
Control Panel.
• In Windows 2000, select [Add/Remove
Programs], and in Windows Vista, select
[Uninstall a program].
3. Select Panasonic elite Panaboard, then remove
it.
4. Follow the on-screen instructions.
5. When uninstallation is complete, restart your
computer.
[Desktop Drawing Tool]
You will be able to use elite Panaboard
software.
•
Note
•
For detailed information about using the
elite Panaboard software, refer to the
included electronic manual or the help
menu. For instructions on viewing the
electronic documentation "Operating
Instructions (For Software)", see "Viewing
the Electronic Documentation" (page 27).
Exiting the elite Panaboard software
Right-click on the
icon in the notification area, and
select [Exit] from the menu.
26
Operating Instructions (For Basic Operations)
Usage
Viewing the Electronic
Documentation
Follow the procedure below to view the electronic
documentation "Operating Instructions (For Software)".
1. Turn on your computer and start Windows.
2. Open "Operating Instructions (For Software)"
from the Start menu.
([Start] ® [All Programs] ® [Panasonic] ® [elite
Panaboard] ® [Operating Instructions for
Software])
• The electronic documentation will be displayed.
• For Windows 2000, [Programs] is displayed
instead of [All Programs].
1
Note
•
To view the electronic documentation, you
must have Adobe® Reader® installed on
your computer. If your computer is
connected to the Internet, you can
download Adobe Reader from Adobe’s web
site.
Download the Latest
Software
Follow the procedure below to download the latest
version of the software from the download web site.
1. Turn on your computer and start Windows.
2. On the Start menu, point to [All Programs] ®
[Panasonic] ® [elite Panaboard], and click
[Download the latest version].
Operating Instructions (For Basic Operations)
27
Appendix
Appendix
Daily Care
When cleaning the elite Panaboard or inside the elite Panaboard, make sure to switch off the power and unplug
the power cord from the AC outlet.
Cleaning the elite Panaboard
Replacing the Battery in the
Electronic Pen
When the charge in the battery in the electronic pen is
low, the message, "The pen battery is low. Replace the
battery soon." will be displayed on the computer screen.
Continued use of the electronic pen can lead to poor
performance. Replace the battery as soon as possible.
See "Inserting (Replacing) Batteries" (page 17) for
details on replacing the battery.
• Dispose of expired batteries quickly, by covering
the terminals in tape and following the disposal
regulations in your country/area.
For Brazil
Após o uso as pilhas / baterias
contidas neste produto poderão
ser dispostas em lixo doméstico.
Gently wipe the elite Panaboard with a soft, moist cloth.
Notice
•
•
•
The elite Panaboard is designed exclusively for
projector images.
For spots that are difficult to remove, use
commercially available white-board cleaner or
neutral household cleaner diluted with water.
Do not use thinner, benzene, or abrasive
chemicals to clean.
(Doing so can result in discoloration.)
For Netherlands
NL
Niet weggooien,
maar inleveren
als KCA.
Bij dit produkt zijn batterijen geleverd.
Wanneer deze leeg ziju, moet u ze niet
weggooien maar inleveren als KCA.
For Taiwan
28
Operating Instructions (For Basic Operations)
Appendix
Replacing the Penpoint of the
Electronic Pen
As the penpoint of the electronic pen becomes worn, a
hole will appear in the penpoint. Continuing to use the
electronic pen in this condition can cause damage to
the screen or unsatisfactory operation, so replace the
penpoint with a new one as soon as possible.
1
Operating Instructions (For Basic Operations)
29
Appendix
Troubleshooting
When experiencing problems, please refer to the table below for possible solutions. If the problem persists,
contact your dealer.
Symptom
Possible cause and solution
See
page
The LEDs do not light
when the power switch is
turned on.
Check that the power cord is properly plugged in.
→ If the problem persists, turn off the power, and then turn it on.
–
Red LED is blinking.
Turn off the power, and turn it on.
→ If the problem persists, contact your dealer.
–
•
The computer does not
recognize the elite
Panaboard.
•
–
The connection between
the computer and the elite
Panaboard is
unexpectedly lost.
Check that the elite Panaboard is in an operable state, and that
the USB cable is properly connected.
–
The electronic pen's
position is not correct.
The projected image is misaligned.
→ Perform the calibration again.
25
•
•
•
Drawn lines and
comments are not
completely displayed or
are displayed in the wrong
location.
The electronic pen loses
the functions.
•
•
•
•
•
•
•
Extra lines are displayed
on the computer screen.
30
The elite Panaboard and your computer are not connected.
→ Securely connect the elite Panaboard and your computer
using a USB cable.
The USB cable is connected to a USB hub.
→ Do not connect the elite Panaboard through a USB hub.
You are holding the electronic pen at an angle.
You are operating the elite Panaboard in direct sunlight or
other strong lighting.
Infrared controllers (e.g., a television remote control) are being
used and pointed towards the position sensor.
There is a wall or ceiling close to the sides of the elite
Panaboard.
There is an air-conditioner vent close to the elite Panaboard.
A plasma or LCD television is being used near by the elite
Panaboard.
Part of the position sensor is blocked.
You are covering part of the electronic pen's sensor with your
hand.
Several electronic pens are being used at the same time.
The electronic pen is low on batteries.
→ Check that none of the above is causing the problem.
If misalignment is not caused by any of the above, perform
the calibration again.
Apart from writing directly on the elite Panaboard with the
electronic pen, you pushed the penpoint with your finger while
holding it close to the elite Panaboard.
→ Avoid pushing the penpoint with your finger.
Operating Instructions (For Basic Operations)
–
–
Appendix
Symptom
Possible cause and solution
See
page
The message "The pen
battery is low. Replace the
battery soon." is displayed
on the computer screen.
The electronic pen’s battery is weak.
→ Replace the electronic pen’s battery.
17
28
Marks written with a
white-board marker
cannot be erased.
Because the elite Panaboard is designed exclusively for projector
images, you cannot erase the marks with a standard eraser.
→ Use commercially available white-board cleaner or neutral
household cleaner diluted with water.
28
•
•
The sound level is low or
no sound is output from
the speaker.
•
•
•
The external device
connected to the USB hub
does not work properly.
•
The volume level of the elite Panaboard is low.
→ Adjust the volume using the volume dial.
The volume of your computer is low or set to mute.
→ Adjust the volume using the volume control in the
notification area, or uncheck the mute setting.
The volume of the application is low.
→ Adjust the volume of the application (e.g. Windows Media
Player).
The connection between the external audio input port and the
VCR or DVD player etc. is not correct.
→ Securely connect the external audio input port and the
VCR or DVD player etc.
15
The elite Panaboard and external devices are not connected.
→ Securely connect the elite Panaboard and external
devices.
A driver or application for enabling the use of external devices
may not be installed on your computer.
→ Install the driver or application following the instructions in
the manual for the external device.
–
1
Operating Instructions (For Basic Operations)
31
Appendix
Specifications
Model
Number
General
32
UB-T781 / UB-T781W / UB-T761
Power
AC 100 V–240 V, 50 Hz/60 Hz
Power Consumption: During
Operation
0.4 A
Operating Environment
Temperature: 15 °C to 35 °C (59 °F to 95 °F)
Humidity: 30 % to 80 %
Storage Environment
Temperature: -20 °C to 40 °C (-4 °F to 104 °F)
Humidity: 15 % to 80 %
Interface
USB 2.0
No. of Hub Ports
2 ports
Interactive
Features
Electronic Pen Power
LR03 (AAA alkaline dry cell battery) × 1
Electronic Pen Battery Life
30 hours (when used continuously at 25 °C [77 °F])
* When using Panasonic LR03 alkaline dry-cell batteries.
Audio
Features
Audio Input
Input level: 309 mVrms (1 KHz, 0 dB, 10 kW)
Stereo 1 system, ø 3.5 mm (1/8 in.) stereo mini jack
Audio Output
2 W + 2 W (maximum 4 W + 4 W)
Operating Instructions (For Basic Operations)
Appendix
Model
Number
UB-T781
External Dimensions: Height
´ Width ´ Depth
1,340 mm ´ 1,752 mm ´ 89 mm
(4 ft. 4 3/4 in. ´ 5 ft. 9 in. ´ 3 1/2 in.)
Weight
27 kg (59.52 lbs)
Input Unit
Screen Board Size: Height ´
Width
1,175 mm ´ 1,692 mm
(3 ft. 10 1/4 in. ´ 5 ft. 6 5/8 in.)
Interactive
Features
Effective Area:
Height ´ Width
1,165 mm ´ 1,502 mm (3 ft. 9 7/8 in. ´ 4 ft. 11 1/8 in.)
Project the image so that it is at least 5 mm (1/4 in.) from
the screen frame. The electronic pen may not function
correctly within 50 mm (2 in.) of the position sensor in the
upper-left corner of the screen board.
General
50 mm (2 in.)
5 mm (1/4 in.)
Projectable Area
77 in.
5 mm
(1/4 in.)
5 mm (1/4 in.)
Operating Instructions (For Basic Operations)
33
1
Appendix
Model
Number
UB-T781W
External Dimensions: Height
´ Width ´ Depth
1,340 mm ´ 1,899 mm ´ 89 mm
(4 ft. 4 3/4 in. ´ 6 ft. 2 3/4 in. ´ 3 1/2 in.)
Weight
28 kg (61.73 lbs)
Input Unit
Screen Board Size: Height ´
Width
1,175 mm ´ 1,839 mm
(3 ft. 10 1/4 in. ´ 6 ft. 3/8 in.)
Interactive
Features
Effective Area:
Height ´ Width
958 mm ´ 1,829 mm (3 ft. 1 3/4 in. ´ 6 ft.)
Project the image so that it is at least 5 mm (1/4 in.) from
the screen frame. The electronic pen may not function
correctly within 50 mm (2 in.) of the position sensor in the
upper-left corner of the screen board.
General
50 mm (2 in.)
5 mm
(1/4 in.)
Projectable Area
83 in.
5 mm (1/4 in.)
34
Operating Instructions (For Basic Operations)
5 mm
(1/4 in.)
Appendix
Model
Number
UB-T761
External Dimensions: Height
´ Width ´ Depth
1,142 mm ´ 1,489 mm ´ 89 mm
(3 ft. 9 in. ´ 4 ft. 10 5/8 in. ´ 3 1/2 in.)
Weight
21 kg (46.3 lbs)
Input Unit
Screen Board Size: Height ´
Width
977 mm ´ 1,429 mm
(3 ft. 2 1/2 in. ´ 4 ft. 8 1/4 in.)
Interactive
Features
Effective Area:
Height ´ Width
967 mm ´ 1,239 mm (3 ft. 2 1/8 in. ´ 4 ft. 3/4 in.)
Project the image so that it is at least 5 mm (1/4 in.) from
the screen frame. The electronic pen may not function
correctly within 50 mm (2 in.) of the position sensor in the
upper-left corner of the screen board.
General
50 mm (2 in.)
5 mm (1/4 in.)
Projectable Area
64 in.
5 mm
(1/4 in.)
5 mm (1/4 in.)
Operating Instructions (For Basic Operations)
35
1
Appendix
Supplies & Accessories
Optional Device
36
Electronic Pen
UE-608025
Stand
KX-B061*1
Stand
UE-608030
Install-Free Kit
UE-608050
*1
KX-B061 is not available for the UB-T761.
•
To purchase separately sold items, contact your dealer.
Operating Instructions (For Basic Operations)
Installation Manual
Installation Manual
Installation Manual (for qualified service personnel)
•
•
•
Request assembly of the Electronic Board, stand and wall mounting from your dealer.
Before constructing or installing the elite Panaboard, please read "Installation Manual (for qualified service
personnel)" carefully.
Especially, please read "For Your Safety" carefully and install the elite Panaboard safely.
Panasonic Communications Co., Ltd. cannot be held responsible for accidents or damage to property
resulting from incorrect installation.
When installing the elite Panaboard on a wall or on the stand, perform installation with 2 people.
For Your Safety
To prevent severe injury and loss of life, read this
section carefully before using the unit to ensure proper
and safe operation of your unit.
The following graphic symbols are used in this
Installation Manual.
WARNING
Denotes a potential
hazard that could
result in serious
injury or death.
CAUTION
Denotes hazards
that could result in
minor injury or
damage to the unit.
These symbols are used to alert
operators to a specific operating
procedure that must not be
performed.
These symbols are used to alert
operators to a specific operating
procedure that must be emphasized
in order to operate the unit safely.
Notice
1
WARNING
Safety check must be done by qualified
service personnel after installing this
option.
Be sure to disconnect the power cord
while installing the unit. Otherwise, it may
cause electric shock or injury.
Be sure to use the specified parts for the
installation. Otherwise, it may cause fire,
electric shock or injury.
Notes in the operating instructions or
notes of labels on the cabinet, chassis or
parts should be observed.
Do not alter the unit and install. Installing
an altered unit can cause fire, electric
shock or injury.
Operating Instructions (For Basic Operations)
37
Installation Manual
Have the unit installed, removed and
disposed of only by qualified service
personnel.
CAUTION
After installing or moving the electronic
board, lock the casters and set the
fall-prevention extension legs.
Locking the casters
(Push this side)
Push to lock
If the unit is hung on a wall, confirm the
wall must be capable of supporting at
least the following weight.
1,373 N (140 kgf)
Do not attach the electronic board to
mortared walls. Accidental electric
leakage from the wall mounting plate
bolts to metal laths or wire laths can
cause heat, smoke or a fire.
Confirm the bolts of the unit are certainly
caught by the wall mounting plate by
pulling the unit after hanging the unit on
the wall mounting plate if the unit is
mounted on a wall.
Be sure to put on a glove to avoid electric
shock or injury.
38
Operating Instructions (For Basic Operations)
Installation Manual
Included Accessories
Confirm that the following items are included with the elite Panaboard.
No.
Part Name
Illustration
Q’ty
Remarks
Power Cord
(3 m [9 ft. 10 1/8 in.])
1
The illustration of the
power cord is for the
United States. The
shape of the plug may
vary depending on
country/area.
USB Cable
(5 m [16 ft. 4 7/8 in.])
1
For computer
connection
CD-ROM
1
Operating Instructions
(For Software)
Drivers
Application software
Cable Holder
1
For power cord
Wall Mounting Plate (Left)
1
—
Wall Mounting Plate (Right)
1
—
Battery (LR03 AAA alkaline
battery)
1
Electronic Pen
1
Penpoint
(Replacement)
2
For electronic pen
Cable Tie
1
Fastener for power cord
when mounted on a wall
1
Operating Instructions
(For Basic Operations)
(includes Installation
Manual)
Operating Instructions
1
For electronic pen
—
Operating Instructions (For Basic Operations)
39
Installation Manual
No.
Part Name
Warranty
Illustration
Q’ty
1
Remarks
May not be included
depending on country/
area.
Notice
•
40
Screws (8 count) for wall mounting are not included. Please purchase screws with a size of M6,
appropriate for your type of wall (page 45).
Operating Instructions (For Basic Operations)
Installation Manual
Wall Mounting Construction
Checking the Wall
When mounting on a wall, consult with your building's owner, caretaker or construction manager to determine
if the wall strength is sufficient to install the elite Panaboard. For safety, install the elite Panaboard only after
thoroughly understanding the type of walls, the appropriate types of screws and the construction method (Page
45).
CAUTION
Do not attach the electronic board to mortared walls. Accidental electric leakage from the wall
mounting plate bolts to metal laths or wire laths can cause heat, smoke or fire.
1
I.
Necessary Tools and Parts (not included with the elite Panaboard)
Drill, Screwdriver, Measuring tape, Level
8 screws (M6 size)
II. Before Starting
1. Make sure that the wall is strong enough to support the elite Panaboard.
Rated strength: greater than 1,373 N (140 kgf)
Notice
•
If necessary, reinforce the wall so that it is strong enough to support the elite Panaboard.
2. Make sure that the location is large enough to accommodate the elite Panaboard.
Height: greater than 2,100 mm (6 ft. 10 5/8 in.)
Width: greater than 2,000 mm (6 ft. 6 3/4 in.)
3. Make sure that the AC outlet is within 3 m (9 ft. 10 1/8 in.) of where the elite Panaboard will be
mounted and that it will not be behind the elite Panaboard.
Operating Instructions (For Basic Operations)
41
Installation Manual
Installing the Wall Mounting Plates
1. Ensure that the wall is strong enough to support the elite Panaboard.
Rated strength: greater than 1,373 N (140 kgf)
2. Using the measuring tape and level, mark the 8 locations to insert the screws.
UB-T781
469.5 mm
(1 ft. 6 15/32 in.)
813 mm
(2 ft. 8 in.)
222.5 mm (8 3/4 in.)
40 mm (1 9/16 in.)
982 mm
(3 ft. 2 21/32 in.)
725 mm
(2 ft. 4 17/32 in.)
30 mm (1 3/16 in.)
44 mm (1 23/32 in.)
UB-T781W
543 mm
(1 ft. 9 3/8 in.)
813 mm
(2 ft. 8 in.)
222.5 mm (8 3/4 in.)
40 mm (1 9/16 in.)
982 mm
(3 ft. 2 21/32 in.)
725 mm
(2 ft. 4 17/32 in.)
30 mm (1 3/16 in.)
44 mm (1 23/32 in.)
42
Operating Instructions (For Basic Operations)
Installation Manual
UB-T761
469.5 mm
(1 ft. 6 1/2 in.)
550 mm
(1 ft. 9 21/32 in.)
222.5 mm (8 3/4 in.)
40 mm (1 9/16 in.)
462 mm
(1 ft. 6 3/16 in.)
784 mm
(2 ft. 6 7/8 in.)
30 mm (1 3/16 in.)
44 mm (1 23/32 in.)
1
Note
•
The dotted line in the illustration represents the outer edge of the elite Panaboard.
3. Drill 8 holes for the wall mounting plates.
• Drill holes that are appropriate for the screws you are using.
4. Install the wall mounting plates using the 4 screws.
• 2 screws are used for each wall mounting plate.
The remaining 4 screws are used after installing the elite Panaboard on the wall.
UB-T7
81
UB-T7/ UB-T781W
61: 55
0 mm : 813 mm (2
(1 ft. 9 21 ft. 8 in
/32 in.) .)
40 mm (1 9/16 in.)
UB-T781 / UB-T781W:
982 mm (3 ft. 2 21/32 in.)
UB-T761:
784 mm (2 ft. 6 7/8 in.)
30 mm (1 3/16 in.)
44 m
(1 23/ m
32
•
•
•
in.)
Screws (8 count) are not included with the elite Panaboard. Please purchase screws with a size of M6,
appropriate for your type of wall.
Tighten the bolt so that it will not become loose.
When drilling the holes and installing the wall mounting plates, follow the procedure in "Wall Types and
Installation Procedures" (page 45).
Operating Instructions (For Basic Operations)
43
Installation Manual
5. Mount the elite Panaboard on the wall.
See "Assembling the elite Panaboard" (For Wall Mounting ® page 52).
44
Operating Instructions (For Basic Operations)
Installation Manual
Wall Types and Installation Procedures
The method for attaching the wall mounting plates to the wall will vary depending on the wall's structure.
Three available options are listed below.
Other methods may be necessary depending on the wall.
Metal or Concrete walls
Stud plugs (not included) are needed.
Drill bit
Drill eight holes in the wall.
For the correct hole size, refer to the
instructions for the particular stud plugs
used.
1
Metal or concrete
wall
Stud plug
Insert a stud plug in the hole.
Wall mounting
plate
Bolt
Insert the bolt through the hole in the wall
mounting plate and tighten until the wall
mounting plate is securely fixed to the wall.
Operating Instructions (For Basic Operations)
45
Installation Manual
Plasterboard walls
Split-wing toggles (not included) are needed.
Split-wing toggle
Wall mounting
plate
Plasterboard
Bolt
Arms
Insert the bolt through the hole in the wall
mounting plate and into the hole in the wall
so that the arms of the split-wing toggle are
horizontal.
For the correct hole size, refer to the
instructions for the particular split-wing
toggles used.
Arms
After the arms expand, pull the wall
mounting plate out until the arms of the
split-wing toggle grip firmly into the wall.
Tighten the bolt until the wall mounting
plate is securely fixed into the wall.
Wooden walls
Wood screws (not included) are needed.
Wall mounting plate
Wood screw
Wooden wall
46
Operating Instructions (For Basic Operations)
Insert the wood screw through the hole in
the wall mounting plate and tighten until the
wall mounting plate is securely fixed to the
wall.
For the correct hole size, refer to the
instructions for the particular wood screws
used.
Installation Manual
Stand Assembly (Sold Separately)
Included Parts
Check that the following parts are included with the stand (KX-BP061).
Part Name
No.
*1
*2
Illustration
Q'ty
Stand Base
2
Support Beam
2
Cross Bar (A)
2
Cross Bar (B)
1
Screw (M6 ´ 45 mm [1 3/4 in.])
10
Two-wing Bolt (M5 ´ 12 mm [1/2 in.])*1
2
Support Bracket
2
Fall-prevention Extension Leg
4
Screw (M6 ´ 60 mm [2 3/8 in.])
4
Nut
4
Wrench*2
1
Washer
10
1
Use the two-wing bolts (F) when securing the elite Panaboard to the stand.
The included wrench is necessary for tightening and loosening the screw (E), so keep it in a safe location.
Operating Instructions (For Basic Operations)
47
Installation Manual
CAUTION
Before assembly, be sure to lock the casters.
Locking the casters
(Push this side)
Assembly Instructions
1. Assemble the fall-prevention extension legs.
48
Operating Instructions (For Basic Operations)
Installation Manual
2. Assemble the stand.
Assemble with the holes
toward the front.
1
Locking
caster side
(rear)
FRONT
REAR
Locking caster
side (rear)
Notice
•
•
Do not over-tighten the screw ( ). (Doing so can warp the support beams.)
Assemble the stand so that the locking casters are on the rear side.
Operating Instructions (For Basic Operations)
49
Installation Manual
3. Pull the fall-prevention extension legs down.
1
2
Note
•
When folding back the fall-prevention extension legs, release the lock as follows ( 1 ,
2 ).
1
1
2
4. Mount the elite Panaboard.
See "Assembling the elite Panaboard" (For Mounting on a Stand (Sold Separately) ® page 55).
50
Operating Instructions (For Basic Operations)
Installation Manual
Assembly Instructions
Preparing for Removing the elite Panaboard from Its Packaging
Open the box, remove the accessory box & packing foam and open the plastic sheet of the elite Panaboard.
Shipping Box
1
[Accessory Box Contents]
•
•
•
•
•
Electronic Board
•
•
•
•
•
•
Power Cord . . . . . . . . . . . . . . 1
USB Cable . . . . . . . . . . . . . . . 1
CD-ROM . . . . . . . . . . . . . . . . 1
Cable Holder . . . . . . . . . . . . 1
Wall Mounting Plate
(Right, Left) . . . . . . . 1 (Each)
Battery . . . . . . . . . . . . . . . . . . . 1
Electronic Pen . . . . . . . . . . . 1
Penpoint . . . . . . . . . . . . . . . . 2
Cable Tie . . . . . . . . . . . . . . . . 1
Operating Instructions . . . . . 1
Warranty . . . . . . . . . . . . . . . . 1
Shipping Box
Notice
•
•
When handling the screen board, hold it by the edge frame and not the screen board itself.
(Holding the screen board can result in damage.)
The packing materials in the shipping box are necessary for repackaging, so keep them in a safe place.
Note
•
The warranty may not be included depending on country/area.
Operating Instructions (For Basic Operations)
51
Installation Manual
Assembling the elite Panaboard
For Wall Mounting
1. Loosely wrap the power cord with the cable tie,
and plug the power cord into the AC inlet.
• Connect the power cord to the elite Panaboard
before installing on a wall.
3. Pull the loose end of the cable tie to tighten it,
and install the power cord depending on the
location of the outlet, as illustrated in the
following diagrams.
• When attaching the power cord downward.
Fasten the power cord
with the cable tie.
Power Cord
2
•
When attaching the power cord along the lower
side of the elite Panaboard.
1
2. Insert the end of the cable tie into the cable tie
fastening hole behind the control-power
cover-back.
Fasten the power
cord with the cable tie.
52
Operating Instructions (For Basic Operations)
Installation Manual
4. Remove the screw (A) of the attachment cover
(B), which is fixed to the attachment board, and
slide the attachment cover down.
Ensure that the attachment cover and the screw
hole (C) of the board attachment are aligned.
6. Unscrew the 4 screws from the front lower
frame cover.
1
1
3
2
After unscrewing the attachment cover screws (A),
fix them in the holes after sliding the attachment
cover down, as shown in the right-sided illustration
above.
7. Lift the bottom of the front lower frame cover to
remove it.
5. Hang the elite Panaboard on the wall mounting
plates with the screw heads.
Note
•
The main unit and the USB speakers on the
front lower frame cover are connected with
the cable. Be careful not to damage the
connectors.
Operating Instructions (For Basic Operations)
53
Installation Manual
8. Disconnect the 2 connectors from the audio
10. Connect the 2 connectors of the USB speaker to
the audio board (D).
board (D).
4
4
9. Fasten to the wall.
Fasten the lower portion of the board attachment
securely to the wall.
11. Attach the front lower frame cover.
Attach the front lower frame cover to the elite
Panaboard and fix it using 4 screws, ensuring that
the cover is flush with the main unit.
Notice
•
•
When mounting on a wall, do not hit or jolt
the elite Panaboard.
After mounting, gently apply some weight
on the elite Panaboard to make sure that it
is securely fastened to the wall.
Note
•
54
Operating Instructions (For Basic Operations)
After installation is complete, use the
included cable holder to manage the power
cord and USB cable.
Installation Manual
12. Wipe the screen board surface.
Gently wipe the screen board surface with a soft,
moist cloth.
For Mounting on a Stand (Sold
Separately)
1. Attach the power cord.
• Connect the power cord to the elite Panaboard
before installing on the stand.
Power Cord
1
Notice
•
•
Do not use thinner, benzene, or abrasive
chemicals to clean.
(Doing so can result in discoloration.)
Do not wipe the screen board with a dry
cloth.
(Doing so can cause static electricity
build-up.)
2. Depending on the location of the outlet, install
the power cord as illustrated in the following
diagrams.
• When attaching the power cord downward.
13. Confirm that the elite Panaboard can operate.
See "Confirming the elite Panaboard
Operation" (page 57).
•
When attaching the power cord along the lower
side of the elite Panaboard.
Operating Instructions (For Basic Operations)
55
Installation Manual
3. Hang the elite Panaboard on the stand with the
screw heads.
•
When installing the elite Panaboard on the
stand, you can adjust its height to 4 different
levels.
When changing the height, remove the left
and right screws from the back of the elite
Panaboard, and securely insert them at the
desired height. Torque (greater than 1 N·m
[10 kgf·cm (9 lbf·in.)]).
elite Panaboard
Height
Screw Position
-100 mm (-3 7/8 in.)
Highest
Standard
2nd from top
+100 mm (+3 7/8 in.)
2nd from bottom
+200 mm (+7 7/8 in.)
Lowest
5. Wipe the screen board surface.
4. Secure the elite Panaboard to the stand frame
Gently wipe the screen board surface with a soft,
moist cloth.
using the two-wing bolts (M5 ´ 12 mm [1/2 in.]
[2 count]) included with the stand.
Notice
•
•
Do not use thinner, benzene, or abrasive
chemicals to clean.
(Doing so can result in discoloration.)
Do not wipe the screen board with a dry
cloth.
(Doing so can cause static electricity
build-up.)
6. Confirm that the elite Panaboard can operate.
Note
•
56
After installation is complete, use the
included cable holder to manage the power
cord and USB cable.
Operating Instructions (For Basic Operations)
See "Confirming the elite Panaboard
Operation" (page 57).
Installation Manual
Confirming the elite Panaboard Operation
After assembling the elite Panaboard, confirm that it operates properly by following the procedure below.
Checkpoints
Action
Operation
1
Turn on the power.
Measure
Green LED lights.
(Normal operation)
Green LED does not light, or
red LED is blinking.
Check the power cord.
See step 1 of "Assembling the elite Panaboard".
• For Wall Mounting ® page 52
• For Mounting on a Stand (Sold Separately)
® page 55
Confirming the Interactive Features
1. Following the procedure in "Installing the elite Panaboard software" (page 22), install the software
and, and connect the included USB cable.
2. Confirm that the interactive features are operating correctly.
• If a projector is not available, confirm operation using only the elite Panaboard and computer.
• When the elite Panaboard software starts, the calibration screen is displayed on the computer screen.
• Perform tentative calibration by pressing the 5 points on the elite Panaboard with the electronic pen,
as shown in the illustration below.
For precise adjustment, it is necessary to use a projector.
Approx. 100 mm (3 7/8 in.)
1
2
Approx.
100 mm (3 7/8 in.)
5
4
•
3
With the elite Panaboard software running, enter White Background mode and select the marker tool.
Confirm operation by writing on the screen board with the electronic pen and checking that the writing
is displayed on the computer's screen. (Your writing with the electronic pen will not appear on the
screen board itself.)
Operating Instructions (For Basic Operations)
57
1
Installation Manual
Repackaging
To repackage the elite Panaboard, perform steps in "Assembling the elite Panaboard" (For Wall Mounting ®
page 52, For Mounting on a Stand (Sold Separately) ® page 55) in reverse. Package the unit as depicted in
the diagram in "Preparing for Removing the elite Panaboard from Its Packaging" (page 51).
Notice
•
58
When handling the screen board, hold it by the frame and not the screen board itself. (Holding the
screen board can result in the damage.)
Operating Instructions (For Basic Operations)
Installation Manual
Attaching the Install-Free Kit (Sold Separately)
Attaching the Install-Free Kit
3. Disconnect the 2 connectors from the audio
board (A).
1. Unscrew the 4 screws from the front lower
frame cover.
1
1
4. Unscrew the 4 screws and remove the
control-power cover-front.
2. Lift the bottom of the front lower frame cover to
remove it.
Note
•
The main unit and the USB speakers on the
front lower frame cover are connected with
the cable. Be careful not to damage the
connectors.
Operating Instructions (For Basic Operations)
59
Installation Manual
5. Disconnect the black cable and the white cable
from the clamper (B).
2
6. Unscrew the 7 screws and remove the hub PCB
shield plate.
7. Attach the install-free kit to the main unit as
shown below.
60
Operating Instructions (For Basic Operations)
8. Attach the hub PCB shield plate to the main unit
using the 7 screws and fix the black cable and
white cable to their previous positions using the
clamper.
9. Attach the control-power cover-front to the
main unit using the 4 screws.
10. Attach the connectors from the USB speakers
to the audio board and attach the front lower
frame cover to the main unit.
11. Fix the front lower frame cover using the 4
screws.
Notes
1
Operating Instructions (For Basic Operations)
61
Notes
62
Operating Instructions (For Basic Operations)
Notes
1
Operating Instructions (For Basic Operations)
63
Information for Users on Collection and Disposal of Old Equipment and used Batteries
These symbols on the products, packaging, and/or accompanying documents mean that used electrical and
electronic products and batteries should not be mixed with general household waste.
For proper treatment, recovery and recycling of old products and used batteries, please take them to applicable
collection points, in accordance with your national legislation and the Directives 2002/96/EC and 2006/66/EC.
By disposing of these products and batteries correctly, you will help to save valuable resources and prevent
any potential negative effects on human health and the environment which could otherwise arise from
inappropriate waste handling.
For more information about collection and recycling of old products and batteries, please contact your local
municipality, your waste disposal service or the point of sale where you purchased the items.
Penalties may be applicable for incorrect disposal of this waste, in accordance with national legislation.
For business users in the European Union
If you wish to discard electrical and electronic equipment, please contact your dealer or supplier for further
information.
Information on Disposal in other Countries outside the European Union
These symbols are only valid in the European Union. If you wish to discard these items, please contact your
local authorities or dealer and ask for the correct method of disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it complies with the requirement
set by the Directive for the chemical involved.
Panasonic Communications Company of North America
Unit of Panasonic Corporation of North America
One Panasonic Way, Secaucus, New Jersey 07094
Panasonic Canada Inc.
5770 Ambler Drive, Mississauga, Ontario, L4W 2T3
Panasonic Business Systems U.K.
A Division of Panasonic U.K. Ltd.
Willoughby Road, Bracknell, Berkshire, RG12 8FP
Panasonic Marketing Europe GmbH
Hagenauer Strasse 43, 65203 Wiesbaden, Germany
For information of Compliance with EU relevant Regulatory
Directives, Contact to Authorised Representative:
Panasonic Testing Centre
Panasonic Marketing Europe GmbH
Winsbergring 15, 22525 Hamburg, Germany
(For EU only)
Web Site: http://panasonic.net
© Panasonic Communications Co., Ltd. 2009
KK0109MS0
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement