advertisement
CONTENTS
1.
CONNECTING YOUR TV-VIDEO COMBI
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Connecting a decoder or other equipment . . . . . . . . . . . .
Switching the On-screen display (OSD) on or off
. . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Switch off function (SLEEP TIMER) . . . . . . . . . . . . . . . . .
Switch on function (WAKE-UP TIMER) . . . . . . . . . . . . . .
2.
INSTALLING YOUR TV-VIDEO COMBI . . . . . . . . . . . . . . . .
Initial installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Allocating a decoder . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Manual TV channel search . . . . . . . . . . . . . . . . . . . . . . . . .
Satellite receiver . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Special installation functions . . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . .
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the language . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Setting the time and date . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.
Before you call an engineer . . . . . . . . . . . . . . . . . . . . . . .
Technical terms used . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3.
IMPORTANT NOTES FOR OPERATION . . . . . . . . . . . . . .
SUMMARY OF USER GUIDE . . . . . . . . . . . . . . . . . . . . . . .
User guide (OSD) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.
TV SET FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Selecting a TV programme . . . . . . . . . . . . . . . . . . . . . . . .
Automatic volume control (AVL) . . . . . . . . . . . . . . . . . . . .
How to read TELETEXT . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.
PLAYBACK FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . .
Playing a cassette . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Tape position indication . . . . . . . . . . . . . . . . . . . . . . . . . . .
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Picture interference . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Cleaning the video heads . . . . . . . . . . . . . . . . . . . . . . . . .
Instant View . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Automatic search for a tape position (index search) . .
6.
MANUAL RECORDING . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Recording without automatic switch-off
Recording with automatic switch-off (OTR
one-touch-recording) . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Protecting your recordings . . . . . . . . . . . . . . . . . . . . . . . .
Auto-assembling . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.
PROGRAMMED RECORDING (TIMER) . . . . . . . . . . . . . . .
’VPS’ (Video Programming System) and ’PDC’
(Programme Delivery Control) . . . . . . . . . . . . . . . . . . . . .
Programming a recording (with ’VIDEO Plus+’) . . . . . . .
Programming a recording (without ’VIDEO Plus+’) . . . .
Programming a recording with TELETEXT . . . . . . . . . . .
How to check or change a TIMER . . . . . . . . . . . . . . . . . .
8.
ADDITIONAL FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . .
Parental control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
3
OPERATING INSTRUCTIONS IN BRIEF
The remote control
TELETEXT e
TELETEXT: To switch TELETEXT on or off
STANDBY m
Switch off : To switch off set, interrupt menu function, interrupt a programmed recording
(TIMER)
0-9
Number buttons: 0 - 9
CLEAR
Delete : To delete last entry or clear programmed recording (TIMER)
TIMER s
TIMER: To make a manual TIMER programming or to alter or clear a programmed TIMER
MENU
Menu: To call up or close the main menu
OK
Store/Confirm: To store or confirm entry
P p
Programme number: To select a programme number up or down
AP q
Select: One line up
BP r Select: One line down
DSr
Select: Cursor left
SqC Select: Cursor right
_Sp
Volume: To regulate the volume y Volume off: To switch the volume on or off z
Previous programme number: To select the previous programme number
PLAY G
Playback : To play a recorded cassette
H
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
STOP h
I
Pause/Stop: To stop the tape, except while a TIMER-recording is being made
INDEX E
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
Index search: In combination with H / I : to search for previous/next recording on the cassette.
RECORD/OTR n
Record: To record the programme selected
STILL R
Still picture: To stop the tape and show a still picture nred ngreen nyellow nblue
Coloured TELETEXT buttons:To select TELETEXT page directly
To select page/chapter shown in red at the bottom of the screen
To select page/chapter shown in green at the bottom of the screen
To select page/chapter shown in yellow at the bottom of the screen
To select page/chapter shown in blue at the bottom of the screen
Front of the set Back of the set
8
Power switch : To switch off the machine
Beware: If you switch off with the power switch, TIMER-recordings are not possible!
m
Standby : To switch off, interrupt a function, interrupt a programmed recording (TIMER)
P r/q Programme number : To select programme number up or down
Sr/q
Volume: To regulate the volume
H
Rewind : During STOP and STANDBY: rewind, during PLAYBACK: reverse scanning
I
Forward wind: During STOP and STANDBY: forward wind, during PLAYBACK: forward scanning
5
Record: To record the programme selected
G
Playback : To play a recorded cassette
?
Pause/Stop: To stop the tape, except while a TIMER-recording is being made
AUDIO
Audio input socket left/right stereo
VIDEO Video input socket : To connect a camcorder or videogames w
Headphones socket: To connect headphones
2
Aerial input socket: To connect the aerial cable
EXT. 1 Scart socket: To connect a satellite receiver, decoder, video recorder, etc.
OPERATING INSTRUCTIONS PHILIPS 14PV330/07-14PV334/335/07
Congratulations! You now own one of the most sophisticated and simple-to-use TV-VIDEO Combinations on the market.
With this TV-VIDEO Combi you can record and play
VHS-standard cassettes.
So that you can identify your machine in the event of theft, enter the serial number (PROD.NO) here. The serial number is printed on the type plate fixed at the rear of the set.
MODEL NO. 14PV330/07-14PV334/335/07
PROD.NO: . . . . . .
Please take the time to read this operating manual before using your TV-VIDEO Combi.
This product complies with the requirements of the Directive
73/23/EEC + 89/336/EEC + 93/68/EEC.
Safety instructions and other notes
A
Danger: High voltage!
Do not remove the top cover as there is a risk of an electrical shock!
A
The TV-VIDEO Combi does not contain any components that can be repaired by the customer. To switch off the TV-VIDEO Combi completely you must switch it off with the power switch.
B
Make sure that air can circulate freely through the ventilation slots on the TV-VIDEO Combi.
B
Make sure that no objects or liquids enter the TV-VIDEO Combi.
If liquid is spilt into it, disconnect the TV-VIDEO Combi immediately from the power supply and call the After-sales
Service for advice.
B
The TV-VIDEO Combi should not be used immediately after
transportation from a cold to a hot area or vice versa, or in conditions of extreme humidity.
After unpacking the TV-VIDEO Combi, it should be allowed to
acclimatize for at least three hours before installation.
C
These operating instructions have been printed on nonpolluting paper.
C
Deposit old batteries at the relevant collection points.
C
Please make use of the facilities available in your country for disposing of the packaging of the TV-VIDEO Combi in a way that helps to protect the environment.
C
This electronic equipment contains many materials that can be recycled. Please inquire about the possibilities for recycling your old set.
D
VIDEO Plus+ and PlusCode are registered trademarks of
Gemstar Development Corporation. The VIDEO Plus+ system is manufactured under licence from Gemstar Development
Corporation.
Technical information
Measurements in cm (W / H / D): 39.2 / 40.7 / 39.8
Power consumption (Standby) : less than 45W (less than 4W)
Voltage : 198-264V 50Hz
Headphones : Output resistance less than 120 Ohms maximum output voltage more than 2.6V at 120 Ohms
Emergency interrupt
You can use the
STANDBY m button on the TV-VIDEO Combi or the remote control to interrupt any function. If you want to interrupt a running Timer recording, hold the
STANDBY m button for several seconds.
So if you are having operating problems, you can just interrupt the function and start again.
And you can practise operating your set without any worries.
No matter which buttons you press, you cannot damage it.
1
2
Special functions on your TV-VIDEO Combi
If a TV channel which transmits TXT/PDC is stored under programme number
’
P01
’, time and date will automatically be taken from the TXT/PDC information.
Crystal Clear video has become the synonym for outstanding picture quality combining Philips’ very latest technologies: Natural Colour, Studio Tracking
System, Digital Studio Picture Control and laser-cut video heads.
Philips has developed a system which produces the best possible playback quality. It reduces disturbance on old, worn video cassettes, and emphasises the detail on very good quality cassettes.
When you have plugged your TV-VIDEO Combi into the mains, you will be welcomed with an OSD picture. All you have to do is follow the instructions in the "intelligent help line" for the next step. Enjoy the Automatic TV channel search/save function and the automatic time adjustment.
Automatic Volume Leveller. This prevents a sudden increase of the volume, for example, during commercials.
Simple programming system for TV-VIDEO Combis. Makes programming as easy as making a telephone call. Simply enter the programme code which you will find in your listings magazine.
The precision tape drive from Philips with a rewind time of 100 seconds (E180) and automatic tape length recognition.
Your TV-VIDEO Combi has been equiped with two tuners. This enables you to watch a programme while you are recording another programme.
4
1.
CONNECTING YOUR TV-VIDEO COMBI
Important for the United Kingdom Connecting the cables
This apparatus is fitted with an approved moulded 13 Amp plug. To change a fuse in this type of plug proceed as follows:
a
Remove fuse cover and fuse.
b
Fix new fuse which should be a BS1362 5A, A.S.T.A. or
BSI approved type.
c
Refit the fuse cover.
If the fitted plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place.
If the mains plug contains a fuse, this should have a value of
5A. If a plug without a fuse is used, the fuse at the distribution board should not be greater than 5A.
D Note: * The severed plug must be destroyed to avoid a possible shock hazard should it be inserted into a 13A socket elsewhere.
a
Insert the aerial plug into the
2 socket.
b
Insert the plug of the mains cable into the wall socket.
c
If the little red light at the front panel of the set is not lit, please switch on the set. The power switch 8 is located on the left side panel of the set.
How to connect a plug:
The wires in the mains lead are coloured in accordance with the following code:
BLUE - ’NEUTRAL’ (’N’)
BROWN - ’LIVE’ (’L’)
Connecting a decoder or other equipment
d
The BLUE wire must be connected to the terminal which is marked with the letter ’N’ or coloured BLACK.
You can also connect additional equipment to the
EXT. 1 socket. For instance, a satellite receiver, decoder or camcorder.
e
The BROWN wire must be connected to the terminal which is marked with the letter ’L’ or coloured RED.
f
Do not connect either wires to the earth terminal in the plug which is marked with the letter ’E’ or by the safety earth symbol
\ or coloured green or green-and-yellow.
Before replacing the plug cover, make certain that the cord grip is clamped over the sheath of the lead - not imply over the two wires.
2.
INSTALLING YOUR TV-VIDEO COMBI
Initial installation Allocating a decoder
a
Open up the battery compartment of your remote control and place the batteries in it as shown in the picture.
Some TV stations will send coded TV channels, that you can only watch when you use a decoder. You can connect such a decoder (descrambler) to your TV-VIDEO Combi. With the following function, the connected decoder will automatically be activated for the TV programme you want to watch.
a
Select the TV channel for which you want to use the decoder with the
P p button on the TV-VIDEO Combi or the number buttons
0-9 on the remote control.
b
Close the battery compartment.
b
Press the
MENU button on the remote control. The main menu will appear.
c
If you have connected the aerial to the TV-VIDEO Combi, press the
OK button.
’Automatic TV channel search’ starts. This picture will appear on the screen:
c
Select the line ’
Installation
’ with the BP r or
AP q buton and confirm with the
SqC button.
d
Select the line ’
Manual store
’ with the
BP r or
AP q button and confirm with the SqC button.
e
Select the line ’
Decoder
’ with the BP r or
AP q button.
Searching...
CHANNELS FOUND:
MANUAL STORE
//////,,,,,,,,,,,,,,,,,,,,,
Channel/Frequency FREQU.
Search 123
Fine tuning
(,,,,=,,,,$
Name edit
Programme number
Decoder xxx
01
OFF Wait until all TV channels have been found. This can take several minutes.
When ’autoinstall’is ready, ’
Installation comp.
’ will briefly appear on the screen.
D If you have connected a decoder, you must install it as described in the next section.
D If you have connected a satellite receiver, please read the section ’satellite receiver’.
ã Exit:
« press MENU
f
Select function ’
ON
’ with the DSr or SqC button. When you select ’
OFF
’, the function will be switched off.
g
Confirm with the
OK button.
h
To end, press the
MENU button.
Your decoder has now been allocated to this TV channel.
i
Press the
MENU button again.
D If you have programmed a recording (TIMER), a wake-up timer or a sleep-timer, you can’t select the function ’
Manual store
’.
5
6
Manual TV channel search
E To confirm the information, press the
OK button.
In certain cases the ’Automatic TV channel search’ may not be able to find all of the TV channels (e.g. coded TV channels). In that case, use this manual method to set the channels.
a
Press the
MENU button on the remote control. The main menu will appear.
h
If you want to change the automatic tv channel setting, select the line ’
Fine tuning
’.
With the DSr or SqC button you can vary the automatic tv channel setting. Important: This re-tuning is only necessary and useful in special cases, e.g.: when there are stripes on the picture with cable-TV systems.
b
Select the line ’
Installation
’ with the BP r or
AP q button and confirm with the
SqC button.
i
Press the
OK button to store the TV channel.
D If you want to search for further TV channels, start again at step
e
.
c
Select the line ’
Manual store
’ with the
BP r or
AP q button and confirm with the SqC button.
j
To end, press the
MENU button.
D If you have programmed a recording (TIMER), a wake-up timer or a sleep-timer, you can’t select the function ’
Manual store
’.
MANUAL STORE
Channel/Frequency FREQU.
Search 123
Fine tuning
Name edit
(,,,,=,,,,$ xxx
Programme number
Decoder
01
OFF
ã Exit:
« press MENU
d
In the line ’
Channel/Frequency
’, select the display for:
’
FREQU.
’: frequency
’
C CH
’: channel
’
S CH
’: special channel
e
If you know the frequency or channel of the desired TV channel, you can enter the data in line ’
Search
’ with the digit buttons
0-9
.
D If you don’t know the frequency or channel of the TV channel of your choice, press the SqC button to start the channel search.
Satellite receiver
You can receive channels from the satellite receiver via the scart socket
EXT. 1
.
To do this, select the channel number ’
E1
’ with the
P p button. You will have to select the channels to be received by the satellite receiver on the receiver itself.
f
In the line ’
Programme number
’ select the programme number you want e.g.: ’
01
’, using the
DSr or
SqC button.
g
If you want to change the TV channel name, press the
SqC button in line ’
Name edit
’.
E Select the character you want to change with the
DSr or the
SqC button. Change the character with the BP r or the AP q button. Select the next character in the same way.
Special installation functions
You can select one of the following installation functions in order to adapt your TV-VIDEO Combi to your own specific requirements.
Automatic TV channel search
Your TV-VIDEO Combi will search for all TV channels.
If you want to start the automatic TV channel search again, then follow the instructions below.
D Automatic Channel Installation:
Some cable companies or broadcasters offer the possibility to install TV channels automatically with ’ACI’.
Information about the installation offered and how to select it, will appear on the screen.
This set will recognize and install TV channels with ’ACI’ automatically.
TV channels will be stored from programme number 1 onward.
If ’ACI’ cannot identify a TV channel, you can search for it using the method as described in the section ’Manual TV
Channel Search’.
a
Press the
MENU button on the remote control. The main menu will appear.
Searching for new TV channels
b
Select the line ’
Installation
’ with the
BP r or
AP q button and confirm with the SqC button.
c
Select the line ’
Autoinstall
’ with the BP r or
AP q button.
d
Press the
SqC button. The ’Automatic TV channel search’ starts.
a
Press
MENU
. The main menu will appear.
b
Select the line ’
Installation
’ with the BP r or
AP q button and confirm with the
SqC button.
c
Select the line ’
Add new channels
’ with the
BP r
SqC or AP q button and confirm with the button.
Channel search will start.
d
To store the TV channel, press
OK
.
Searching...
CHANNELS FOUND:
//////,,,,,,,,,,,,,,,,,,,,,
e
Repeat step
d
, until you have found all desired TV channels.
D If you have programmed a recording (TIMER), a wake-up timer or a sleep-timer, you cannot select the function ’
Add new channels
’.
e
When the TV channel search is complete,
’
Installation comp.
’ will appear on the screen.
How to search for a TV channel manually, you can read in the section ’Manual TV channel search’.
D If you have programmed a recording (TIMER), a wake-up timer or a sleep-timer, you can’t select the function
’
Autoinstall
’.
7
8
Allocating a channel number Delete a TV Channel
a
Press the
MENU button. The main menu will appear.
b
Select the line ’
Installation
’ with the
BP r or
AP q button and confirm with the SqC button.
a b
Press the
MENU button. The main menu appears.
Select the line ’
Installation
’ with the
BP r or
AP q button and confirm with the SqC button .
c
Select the line ’
Sort channels
’ with the BP r or
AP q button and confirm with the
SqC button.
c
Select the line ’
Sort channels
’ with the BP r or
AP q button and confirm with the menu button
SqC .
SORT CHANNELS
SORT CHANNELS
01 zzz
02 yyy
03 xxx
04 aaa
05 bbb
06 ccc
01 zzz
02 yyy
03 xxx
04 aaa
05 bbb
06 ccc
ã Exit:
« press MENU
To move: press OK
ã Exit:
« press MENU
To move: press OK
d
With the BP r , AP q , DSr or SqC button, select the TV channel to which you want to allocate a programme number and press the
OK button.
d
With the
BP r
,
AP q
,
DSr or
SqC button, select the TV channel you want to delete and press the
CLEAR button.
e
With the BP r , AP q , DSr or SqC button, shift the TV channel to the programme number you wish to allocate to this TV channel and press the
OK button.
e
Repeat step
d
, until you have deleted all the required
TV channels.
f
Repeat steps
d
to
e
until you have allocated a programme number to all the required TV channels.
g
To end, press the
MENU button.
D If you have programmed a recording (TIMER), a wake-up timer or a sleep-timer, you can’t select the function ’
Sort channels
’.
f
To end, press the
MENU button.
D If you have programmed a recording (TIMER), a wake-up timer or a sleep-timer, you can’t select the function ’
Sort channels
’.
Setting the language Setting the time and date
You can select the language for the on-screen display (OSD).
a
Press the
MENU button on the remote control. The main menu will appear.
a
Press the
MENU button on the remote control. The main menu will appear.
b
Select the line ’
Installation
’ with the buttons
BP r or
AP q and confirm with the button
SqC .
c
Select the line ’
Set clock
’ with the BP r or
AP q button and confirm with the
SqC button.
MAIN MENU
Picture
Sound
Setup
Tape
Installation
ã Exit:
« press MENU
b
Select the line ’
Installation
’ with the
BP r or
AP q button and confirm with the SqC button.
SET CLOCK
Time
Year
Month
Date
Smart clock
ã Exit:
« press MENU
15:36
2000
06
08
ON
INSTALLATION
Add new channels
Sort channels
Autoinstall
Manual store
Set clock
Language
ã Exit:
« press MENU
ENGLISH
c
Select the line ’
Language
’ with the
BP r or
AP q button.
d
Select your language with the DSr or SqC button.
e
To end, press the
MENU button.
d
Check the time in line ’
Time
’. If required, please change the time with the
0-9 buttons on the remote control.
e
Check ’
Year
’, ’
Month
’ and ’
Date
’ in the same way.
You can switch between entry fields with BP r or
AP q button. Confirm with the
OK button.
f
To end, press the
MENU button.
9
Automatic time and date setting
(SMART CLOCK)
D If a television programme, which transmits TELETEXT, is stored with programme number ’
P01
’, time and date will be set automatically.
D The time will automatically be adjusted to winter time and summer time.
a
Press the
MENU button on the remote control. The main menu will appear.
b
Select the line ’
Installation
’ with the buttons
BP r
SqC or AP q and confirm with the button
.
c
Select the line ’
Set clock
’ with the
BP r or
AP q button and confirm with the SqC button.
d
Select the line ’
Smart clock
’ with the menu buttons
BP r or
AP q
.
e
Switch the function on with the menu buttons
DSr or
SqC .
f
Confirm with the
OK button.
g
To end, press the
MENU button.
10
3.
IMPORTANT NOTES FOR OPERATION
SUMMARY OF USER GUIDE
The OSD menu offers the following functions. More details on each can be found in the appropriate chapter.
MAIN MENU
Picture
Sound
Setup
Tape
Installation
ã Exit:
« press MENU
User guide (OSD)
The OSD (On-screen display) shows the various functions in the form of a menu on the television screen. You can then choose the settings you require. There is a summary of the menus on this page. The main button functions are displayed in a help line along the bottom of the screen.
E To call up the menu: With the
MENU button.
E To select a line: With the
BP r or
AP q button.
E To select within a line: With the
DSr or
SqC button.
E To enter or change your selection: With the
0-9
,
DSr or
SqC button.
E To enter or change your selection in the TIMER entry
columns: With the BP r or AP q button.
E To cancel: With the
MENU button.
E To save: With the
OK button.
E To confirm: With the
SqC button.
E To exit the menu: With the
MENU menu button.
PICTURE
Brightness
Colour
Contrast
Sharpness
Store as pref.
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
NO
ã Exit:
« press MENU
Chapter ’TV FUNCTIONS’
SOUND
Volume
(,,,,,,,,,
Auto volume cont.
YES
Store as pref.
NO
ã Exit:
« press MENU
Chapter ’TV FUNCTIONS’
SETUP
Parental control
Display
OFF
MAX
ã Exit:
« press MENU
Chapter ’ADDITIONAL FUNCTIONS’
E To confirm the messages in red on the screen: Press the
OK button.
E You can switch the machine on with the
P p
, z or
0-9 button or by putting in a cassette.
TAPE
Tape speed
Tape counter
Repeat play
Jitter
Tracking
Cleaning
SP
LEFT
OFF
(,,,,=,,,,$
(,,,,=,,,,$
ã Exit:
« press MENU
Chapter ’PLAYBACK FUNCTIONS’
11
Important notes for operation
E We suggest that, from now on, you switch off your
TV-VIDEO Combi with the
STANDBY m button on the front of the set or on the remote control.
When the set is in the standby mode, a small red lamp at the front of the set will be alight.
E You can switch on with the
P p or z button, the
0-9 buttons or by inserting a cassette.
AAttention: If you use the power switch
8 on the side panel, you switch off the set completely from the mains power supply. No programmed recordings will then be made. The red lamp at the front of the set will not be alight. After some time, the date and clock settings will be lost.
We advice you to keep your TV-VIDEO Combi connected to the mains at all times to ensure that programmed recordings can be made and that the television works normally. The power consumption will be low.
E Attention: If you switch off the appliance with the power switch 8 , make sure that you have removed the tape by pressing the
?
button.
E If you diconnect your TV-VIDEO Combi from the mains,
TIMER and channel information will remain stored for about 1 year and clock information will remain stored for
30 minutes.
12
4.
TV SET FUNCTIONS
Selecting a TV programme Volume control
Select the required TV channel (=programme number) with the
P p button or with the digit buttons
0-9 on the remote control.
D If you don’t know the programme number of the required
TV channel:
a
Press the
P p button for more than 2 seconds.
The TV channel list appears on the screen.
b
Select the required TV channel with the
P p button.
After 1 second the TV-VIDEO Combi will switch to the selected programme number.
You can control the volume level with the
_Sp button.
If you want to mute the sound temporarily (e.g.: during a telephone call), press the y button on the remote control.
When you press the y button again, the sound will return at its original volume level.
Sound settings
a
Press the
MENU button. The main menu appears.
Picture settings
b
Select the line ’
Sound
’ with the
BP r or
AP q button and confirm with the SqC button.
a
Press the
MENU button. The main menu appears.
b
Select the line ’
Picture
’ with the menu buttons
BP r
SqC or AP q and confirm with the menu button
.
SOUND
Volume
(,,,,,,,,,
Auto volume cont.
YES
Store as pref.
NO
ã Exit:
« press MENU
PICTURE
Brightness
Colour
Contrast
Sharpness
Store as pref.
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
(,,,,,,,,,
NO
ã Exit:
« press MENU
c
Select the required line with the menu buttons BP r or
AP q and alter with the menu buttons
DSr or
SqC .
D To store this setting as a standard setting, select the line ’
Store as pref.
’ with the menu buttons
BP r or AP q . Select ’
YES
’ and confirm with the
OK button.
c
Select the line ’
Volume
’ with the
BP r or
AP q button and change with the DSr or SqC button.
D To store this setting as a standard setting, select the line ’
Store as pref.
’ with the
BP r or
AP q
OK button. Select ’
YES
’ and confirm with the button.
D To call up the standard settings, switch the set off and on again.
Automatic volume control (AVL)
E Switch on ’
Auto volume cont.
’, to activate the automatic volume control. This will minimise sudden changes in TV volume, e.g. when commercial spots are being transmitted or when switching TV channels.
d
To end, press
MENU button.
13
How to read TELETEXT
E Press the
TELETEXT e button to switch the TXT decoder on and off. The TV-VIDEO Combi is now receiving the TXT of the TV channel currently selected.
E To store the current page as preferred page, press the
OK button.
The next time you call up TELETEXT, you will automatically turn to this page.
E If you want to select an other page, type in the number of the page with the digit buttons
0-9
. With the colour buttons on your remote control you can directly select the page numbers shown at the bottom of the TV screen.
Extra TELETEXT functions
To use the extra TELETEXT functions, press the
MENU button, when you are in TELETEXT.
E To enlarge the print, select the symbol ’ g
’ and confirm with the
OK button.
E To switch off the TELETEXT decoder temporarily, select the symbol ’ d
’ and confirm with the
OK button.
E To call up a TELETEXT sub-page:
a
Select the symbol ’ button.
}
’ and confirm with the
OK
b
Enter the page number of the sub-page with the
0-9
-buttons (e.g.: 0123).
E To call up concealed information, select the symbol ’ b
’ and confirm with the
OK button.
E To stop the pages from being turned over, select the symbol ’ f
’ and confirm with the
OK button.
E To show TELETEXT transparently, select the symbol ’
-
’ and confirm with the
OK button.
14
5.
PLAYBACK FUNCTIONS
Playing a cassette Searching for tape position with the picture
(picture search)
a
Put a cassette into the cassette slot.
b
Press the
PLAY G button.
E If you press the
STOP h button once, the TV-VIDEO
Combi will switch to pause. To stop, press the
STOP h button again.
E To eject the cassette, press the
?
button on the
TV-VIDEO Combi or press the
STOP h button on the remote control several seconds.
D Before transportation, make sure that no cassette is in the TV-VIDEO Combi.
D If you insert an erase protected cassette, the
TV-VIDEO Combi will automatically start playback.
D Some hired cassettes may have poor picture or sound quality. This is not a fault in your machine.
Please read ’Eliminating picture interference’.
D Some functions will automatically switch off after a while (for example, pause, still picture, picture search). This helps to protect the cassette and avoids wasting power.
a
While a cassette is playing, press the
H
(reverse) or
I (forward) button once or several times.
b
To stop at a certain picture, press the
PLAY G button.
D During picture search, the picture quality may not be so good and there will be no sound.
Still picture
a
Press the
STILL R button. A still picture will appear on the screen.
b
Each time you press
STILL R again, the picture will move on one step.
Searching for tape position without the picture (wind and rewind)
a
Stop the tape with the
STOP h button.
b
Press the H (reverse) or I (forward) button.
Tape position indication
c
To stop at a certain picture, press the
STOP h button.
D Press the
OK button to display the current tape position.
D To change the type of tape position display, proceed as follows:
Instant View
With this function you can switch to picture search during wind and rewind.
a
During playback, press the
MENU button.
a
If you hold the H (rewind) or I (wind) button during wind or rewind, you will switch to picture search.
b
Select the line ’
Tape
’ with the menu buttons BP r or
AP q and confirm with the
SqC button.
b
When you release the button, the TV-VIDEO Combi will automatically switch back to rewind or wind.
c
Select the line ’
Tape counter
’ with the menu buttons BP r or AP q .
d
With the menu buttons DSr or SqC select
’
USED
’ to check the time used, or ’
LEFT
’ to check the time left on the tape.
e
Confirm with the
OK button.
15
Automatic search for a tape position (index search)
At the start of each recording, the TV-VIDEO Combi will write an index code on the tape.
d
Hold the DSr or SqC button until the picture quality is at its best.
e
Confirm with the
OK button.
a
Press the
INDEX E button. Press the
I button to select the next code mark or the H button for the previous code mark.
b
When the TV-VIDEO Combi finds the code mark, it will automatically switch to play.
f
To end, press the
MENU button.
D Please note, however, that interference may still occur with poor quality cassettes.
Cleaning the video heads
If horizontal lines appear on the screen when you play a cassette, you should clean the video heads.
Picture interference
When the picture quality is poor when you play a cassette, please follow these instructions.
Tracking during playback
a
During playback, press the
MENU button.
b
Select the line ’
Tape
’ with the buttons
BP r or
AP q and confirm with the SqC button.
c
Select the line ’
Tracking
’ with the buttons BP r or
AP q
.
a
During playback, press the
MENU button.
b
Select the line ’
Tape
’ with the menu buttons
BP r or
AP q and confirm with the SqC button.
d
Hold the buttons
DSr or
SqC until the playback quality is at its best.
c
Select the line ’
Cleaning
’ with the menu buttons
BP r or
AP q
.
e
Confirm with the
OK button.
f
To end, press the
MENU button. This setting will remain until you remove the cassette.
d
Press the
OK button. ’
CLEANING
’ appears on the screen.
Tracking during still picture
e
Wait a few seconds, until the message disappears and then press the
MENU button.
If the still picture vibrates vertically, you can improve the still picture as follows:
a
During still picture, press the
MENU button.
b
Select the line ’
Tape
’ with the
BP r button or
AP q and confirm with the SqC button.
c
Select the line ’
Jitter
’ with the BP r or AP q button.
16
6.
MANUAL RECORDING
Use ’Manual Recording’ to make a spontaneous recording (for example, a programme currently being shown).
E If you want to start and stop a recording manually, read the section: ’Recording without automatic switch-off’.
E If you want to start a recording manually but have it stopped automatically, read the section: ’Recording with automatic switch-off’.
d
Press the
RECORD/OTR n button again and again until the display on the TV-VIDEO Combi shows the desired end time or length of the recording.
D To cancel this information, press the
CLEAR button.
e
Confirm with the
OK button.
f
To end, press the
MENU button.
Recording without automatic switch-off
Protecting your recordings
a
Insert a cassette.
b
Use the
P p button to select the programme number you want to record, for example, ’P01’.
D Programme number ’
E1
’ is provided for recording from external sources (via the
EXT. 1 scart socket).
D Programme number ’
AV
’ is provided for recording from external sources (via the Audio/Video socket
AUDIO at the front of the TV-VIDEO Combi).
So that you don’t accidentally delete an important recording, remove the special tab on the narrow side of the cassette with a screwdriver or slide the special tab to the left. Later, if you no longer want to protect your recording, you can seal the gap again with sticky tape or slide the special tab to the right.
Auto-assembling
c
To start recording, press the
RECORD/OTR n button on the remote control or 5 on the TV-VIDEO Combi.
When you are recording, the red recording light at the front panel of the TV-VIDEO Combi will be lit.
You can use the auto-assembling function to join individual recordings without any major picture disturbance between them.
d
Stop recording with the
STOP h button.
D If you want to switch off the screen while recording, press the
STANDBY m button once .
D To switch the screen back on again, press the
P p button.
D During a recording you can watch other TV channels.
a
While the cassette is playing, search for the correct position on the tape.
b
Stop the cassette by pressing the
STOP h button.
’
Pause
’ will appear on the TV screen.
c
Now start recording as usual by pressing the
RECORD/OTR n button on the remote control.
Selecting the recording speed (SP or LP)
Recording with automatic switch-off
(OTR one-touch-recording)
You can reduce the recording speed by half. This makes it possible to record, for example, eight-hours instead of four-hours on an ’E240’ (four-hour) cassette.
a
Put a cassette in the machine.
b
Use the
P p button to select the programme number you want to record.
a
Press the
MENU button. The main menu appears.
b
Select the line ’
Tape
’ with the BP r or AP q button, and confirm with the
SqC button.
c
Press the
RECORD/OTR n button on the remote control.
When you are recording, the red recording light at the front panel of the TV-VIDEO Combi will be lit.
c
Select the line ’
Tape speed
’ with the
BP r or
AP q button.
17
d
Select the required recording speed with the DSr or
SqC button.
D ’
LP
’: Long Play = half recording speed (double recording time).
’
SP
’: Standard Play = normal recording speed.
D The picture quality will be adversely affected when recording at half recording speed (’LP’).
D For playback, the correct recording speed will automatically be selected.
e
Confirm with the
OK button.
f
To end, press the
MENU button.
18
7.
PROGRAMMED RECORDING (TIMER)
Use programmed recording to automatically start and stop a recording at a later date.
Programming a recording (with ’VIDEO
Plus+’)
To make a programmed recording, your TV-VIDEO Combi needs to know:
All the information required for a programming is contained in the PlusCode programming number.
* the date you want to make the recording;
* the programme number for the TV channel you want to record;
* the start and stop time of the recording;
* whether you want to use VPS or PDC;
* the recording speed (SP/LP).
a
Press the
TIMER s button on the remote control.
The TV-VIDEO Combi stores all the information in a TIMER block. You can programme up to 6 TIMER blocks a month in advance.
b
Select the line ’
VIDEOPlus
’ with the BP r or
AP q button and confirm with the
SqC button.
’VPS’ (Video Programming System) and
’PDC’ (Programme Delivery Control)
With ’VPS and PDC’, the TV station controls the start time and the length of the recording. This means that the TV-VIDEO
Combi switches itself on and off at the right time even if a TV programme you want to record begins earlier or finishes later than expected.
Usually the start time is the same as the VPS or PDC time. But if your TV guide gives a VPS or PDC time which is different to the programme’s start time (for example, 20.15 and VPS 20.14), you must enter ’20.14’ as the start time.
If you want to programme a time that is different from the VPS or PDC time, you must switch off VPS or PDC.
c
Enter the entire PlusCode programming number (up to 9 digits) printed in your TV guide next to the start time of a
TV programme.
For example, 5-234-89 or 5 234 89
Enter 523489 for the PlusCode programming number.
If you make a mistake, you can clear your instructions with the
CLEAR button.
VIDEOPLUS
CODE REPEAT
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
1 2 3 4 5 6( ( ( ONCE
0-9 Store: press OK
d
In line ’
REPEAT
’ select the kind of programming required with the
BP r or
AP q button.
’
ONCE
’: recording only once
’
Mo-Fr
’: recordings every day from Monday to Friday.
’
Mo-Su
’: recordings every day from Monday to Sunday.
’
WEEKLY
’: recordings every week on the same day of the week.
19
e
Confirm with the
OK button. Your programming details will then appear on the TV screen.
Programming a recording (without ’VIDEO
Plus+’)
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
a
Press the
TIMER s button on the remote control.
b
Select the line ’
TIMER PROGRAMMING
’ with the menu buttons
BP r or
AP q and confirm with the
SqC button.
f g h
ã
«
è Store: press OK
D If VIDEO Plus+ does not recognise the TV channel,
’
P??
’ will appear on the TV screen. Instead of
’
P??
’, you can select the programme number you want with the number buttons
0-9
.
D If ’
Code error
’ appears on the TV screen, this means you entered an incorrect PlusCode number or the incorrect date. Correct your instructions or end with the
TIMER s button.
D If ’
Daily error
’ appears on the TV screen, the date was incorrectly entered.
D Under ’
VPS/PDC
’, use the
BP r or
AP q button to switch ’VPS or PDC’ on or off.
D Under ’
LP
’, use the BP r or AP q button to select the recording speed ’SP’ or ’LP’.
D The TIMER lamp on the front of the set will light up when one or more of the TIMER blocks are occupied.
D When you are recording, the red recording light at the front of the TV-VIDEO Combi will be alight.
D If the end of the cassette is reached during a recording, the TV-VIDEO Combi will automatically eject the cassette.
D If you forgot to insert cassette, ’
No cassette
’ will appear.
D If you have inserted a cassette with erase protection when you want to start a recording, the cassette will be ejected.
Press the
OK button.
Confirm the message on the screen with the
OK button.
A TIMER recording can only start, if the set is not used for other video recorder functions (e.g. playback).
To end, press the
TIMER s button.
TIMER PROGRAMMING
VPS
DATE PROG.
START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
----:-- --:--- -----
ã Exit:
« press TIMER
c
Press the
SqC button.
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
ã
«
è
Start: press è
Store: press OK
d
Select the entry field with the DSr or SqC button.
e
Enter information with the menu buttons
BP r or
AP q or with the digit buttons
0-9
.
D Under ’
REP.
’, use the BP r or AP q button to select daily or weekly programming.
’
ONCE
’: Recording only once.
’
Mo-Fr
’: Recording from Monday to Friday.
’
Mo-Su
’: Recording from Monday to Sunday.
’
WEEKL
’: Recording every week on the same day.
D Under ’
VPS/PDC
’, use the
BP r or
AP q button to switch ’VPS or PDC’ on or off.
D Under ’
LP
’, use the BP r or AP q button to select the recording speed ’SP’ or ’LP’.
20
f
Press the
OK button.
g
Confirm the message on the screen with the
OK button.
A TIMER recording can only start, if the set is not used for other video recorder functions (e.g. playback).
f
Press
OK
. The timer menu will appear. The required programming information has been stored in a TIMER block. Please check the information.
h
Exit the menu with the
TIMER s button.
E The programming information has been stored in a TIMER block.
TIMER PROGRAMMING
VPS
DATE PROG. START END LP PDC REP.
,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,,
15 xxx 15:36 15:50 - * ONCE
i
Make sure that the cassette you have put in can be recorded on.
ã
«
è Store: press OK
Programming a recording with TELETEXT
With this function programming a recording will be considerably easier. In TELETEXT you select the TV programme you want record. All the required information for recording will be transferred and stored in a TIMER block. You can find more information on TELETEXT in the chapter ’TV SET
FUNCTIONS’.
a b
Select the TV channel you want to record from.
Press
TELETEXT e to activate TELETEXT. Your TV-VIDEO
Combi will now show TELETEXT for the TV channel you have selected.
g
For changing the TIMER information, select the entry field with the DSr or SqC button. Change the information with the
BP r or
AP q button or with the number buttons
0-9
.
D Under ’
REP.
’, use the BP r or AP q button to select daily or weekly programming.
’
ONCE
’: Recording only once.
’
Mo-Fr
’: Recording from Monday to Friday.
’
Mo-Su
’: Recording from Monday to Sunday.
’
WEEKL
’: Recording every week on the same day.
D Under ’
VPS/PDC
’ switch ’VPS/PDC’ on or off with the BP r or AP q button.
D Under ’
LP
’ select the recording speed ’SP’ or ’LP’ with the
BP r or
AP q button.
c
With the number buttons
0-9 select the TELETEXT programme guide page. This page can be stored as the preferred page (see paragraph ’How to read TELETEXT’).
h
When all information is correct, press
OK
.
d
Press
TIMER s
. ’
PLEASE WAIT
’ will briefly appear at the bottom of the screen.
Next, a highlighted title line will appear.
D If ’
NO TIMER INFORMATION ON THIS
PAGE
’ appears, TELETEXT programming cannot be used for the programme you have selected. In this case, you should programme the recording as described in the paragraph ’programming a recording’.
i
Confirm the message on the screen with
OK
.
A Timer recording can only start, if the set is not being used for other video recorder functions (e.g. playback).
D The programming information has been stored in a
TIMER block.
j
Exit the menu with the
TIMER s button.
k
Make sure that the cassette you have put in can be recorded on.
e
Use the
BP r and
AP q buttons to move the cursor
( h ) to the TV programme you want to record.
D If you want to cancel this function, press
TELETEXT e
.
21
How to check or change a TIMER
a
Press the
TIMER s button on the remote control.
b
Select the line ’
TIMER PROGRAMMING
’ with the menu buttons BP r or AP q and confirm with the
SqC button.
c
Select the TIMER you want to check or change with the
BP r or AP q button and confirm with the
OK button.
d
Select the entry field with the
DSr or
SqC button.
e
Change any information with the BP r or AP q button or with the
0-9 buttons.
D Under ’
LP
’, use the
BP r or
AP q button to select the recording speed ’SP’ or ’LP’.
f
Confirm with the
OK button.
g
To end, press the
TIMER s button.
h
Make sure that the cassette you have put in can be recorded on.
How to clear a TIMER
a
Press the
TIMER s button on the remote control.
b
Select the line ’
TIMER PROGRAMMING
’ with the menu buttons
BP r or
AP q and confirm with the
SqC button.
c
Select the TIMER you want to clear with the menu buttons
BP r or
AP q
.
d
Press the
CLEAR button.
e
Switch off with the
TIMER s button.
22
8.
ADDITIONAL FUNCTIONS
Parental control Switching the On-screen display (OSD) on or off
This function will prevent unauthorised use of your TV-VIDEO
Combi. All button-functions will be locked.
D You can make programmed recordings while the parental control is on.
You can switch the On Screen Display of the current operating information on or off.
a
Press the
MENU button. The main menu appears.
a
Press the
MENU button. The main menu will appear.
b
Select the line ’
Setup
’ with the
BP r or
AP q button and confirm with the SqC button.
b
Select the line ’
Setup
’ with the menu buttons
BP r or AP q and confirm with the SqC button.
SETUP
Parental control
Display
OFF
MAX
SETUP
Parental control
Display
OFF
MAX
ã Exit:
« press MENU
ã Exit:
« press MENU
c
In the line ’
Parental control
’ select ’
ON
’ with the DSr or SqC button.
c
Select the line ’
Display
’ with the menu buttons
BP r or AP q .
d e
Confirm with the
OK button.
To end, press the
MENU button.
Keep the remote control in a safe place.
f
Switch off the machine with the
STANDBY m button.
D If you want to switch off parental control, select
’
OFF
’ in line ’
Parental control
’.
D If a button is pressed with activated parental control, ’
Parental Control active
’ will appear.
D If you have activated parental control, you can only operate the TV-VIDEO Combi with the remote control.
D If you want to eject a cassette with activated parental control, press the
STOP h button several seconds.
d
Select one of the options indicated with the menu buttons
SqC or
DSr
.
’
MAX
’: The OSD appears for a few seconds each time an operating mode is selected and then disappears.
’
MIN
’: The OSD is reduced to a minimum.
’
PROGR.
’: The programme number is always shown.
’
COUNTER
’: The tape position is always shown.
e
Confirm with the
OK button.
f
To end, press the
MENU button.
D With the
OK button you can superimpose the On
Screen Display of current operating mode on the TV screen.
23
Continuous playback Switch off function (SLEEP TIMER)
You can automatically play a cassette again and again. When the end of the tape or the recording has been reached, it will rewind and start again.
You can programme your set to switch off after a predetermined period.
a
Press the
TIMER s button on the remote control.
a
Press the
MENU button. The main menu appears.
b
Select the line ’
Tape
’ with the menu buttons
BP r or
AP q . Confirm with the menu buton SqC .
b
Select line ’
Sleep timer
’ with the BP r or
AP q button and confirm with the
SqC button.
c
Determine the time left until switch off in 15 minutes intervals using the BP r or AP q button.
D You can switch the function off with the
CLEAR button on the remote control.
TAPE
Tape speed
Tape counter
Repeat play
Jitter
Tracking
Cleaning
SP
LEFT
OFF
(,,,,=,,,,$
(,,,,=,,,,$
d e
Confirm with the
OK button.
To end, press the
TIMER s button.
ã Exit:
« press MENU
Switch on function (WAKE-UP TIMER)
c
Select the line ’
Repeat play
’ with the menu buttons
BP r or AP q .
You can programme your set to switch on at a predetermined time.
d
Select ’
ON
’ with the menu buttons DSr or
SqC
. If you select ’
OFF
’, the function will be switched off.
a
Press the
TIMER s button on the remote control.
e
Confirm with the
OK button.
b
Select line ’
Wake-up timer
’ with the
BP r or
AP q button and confirm with the SqC button.
f
Press the
MENU button.
c
Select the entry field with the DSr or SqC button.
d
Enter the information with the
BP r or
AP q button or with the number buttons
0-9
.
e
In the line ’
ON
’, switch the function on or off.
f
Press the
OK button.
g
To end, press the
TIMER s button.
24
9.
Before you call an engineer
If, contrary to expectation, you have any problems using this
TV-VIDEO Combi, it may be caused by one of the reasons mentioned below. You can also call the customer service
centrein your country.
You will find the phone number in the enclosed guarantee leaflet.
Your TV-VIDEO Combi does not respond to any button being pressed:
• There is no power supply: check the power supply
• A programmed recording is currently being made: cancel the programmed recording with the
STANDBY m button.
• Parental control is on: switch the parental control off.
• Continuous playback is on: switch the continuous playback off.
• There is a technical problem: switch off with the
8 power switch for 30 seconds, then switch it on again.
’Smart Clock’ setting does not work:
• You have stored a TV channel on programme number ’
P01
’ that does not transmit TELETEXT: On ’
P01
’ store a TV channel that transmits TELETEXT.
• Poor TELETEXT reception: On ’
P01
’ store a TV channel with good TELETEXT reception.
• You have not activated the Smart Clock function: Switch the function ’
ON
’.
You hear a very short and soft noise coming from your
TV-VIDEO Combi at 3:00 at night:
• ’Smart Clock’ is checking the time: Switch off the Smart Clock function.
TELETEXT does not start at page 100:
• You have stored a different preferred page: Store page 100 as preferred page.
Cassette is jammed in the TV-VIDEO Combi:
• Don’t use force. Switch off with the
8 power switch for 30 seconds, then switch it on again.
Technical terms used
Remote control does not work:
• Remote control not pointed toward the TV-VIDEO Combi: point it at the TV-VIDEO Combi.
• Batteries have run out: change the batteries.
No picture when you play a cassette:
• There is no recording on the cassette: change the cassette.
Poor picture quality when you play a cassette:
• The cassette badly worn or of poor quality: use new cassette.
• Tracking is not properly adjusted or the video heads are dirty: turn to chapter ’PLAYBACK’ and read the section ’Cleaning the video heads’.
• Read the section ’Eliminating picture interference’.
• You are playing a cassette with a LongPlay recording on it:
Excellent picture quality is only guarateed with recordings made in StandardPlay recording speed.
The TV-VIDEO Combi will not record:
• The TV channel you want to record is not stored or you selected the wrong programme number: check TV channels stored.
• You have loaded a cassette which cannot be recorded on: undo the erase protection on the cassette.
Programmed recording does not work:
• You have not set the TIMER properly: check the TIMER blocks.
• You have programmed the wrong time or date: check time and date.
• You have put in a cassette that cannot be recorded on: undo the erase protection on the cassette.
• ’PDC’ or ’VPS’ switched on but ’PDC/VPS time’ wrong: enter PDC or VPS time exactly to the minute. Have the aerial checked.
Current tape position : The part of the tape currently being played.
External source : A device connected via a socket (for example, scart socket) which is transmitting audio/video signals to the TV-VIDEO Combi.
Index marking : A marking which is automatically made on the tape at the beginning of every recording. This marking
(recording ID) can be searched for with the Index search function.
Scart cable : Also known as a Euro-AV cable. This standard cable is an easy method of connecting various TV, audio and video devices, such as a HIFI and Dolby Surround set, video recorder, DVD player, SAT receiver, decoder, computer and similar devices. Other signals in addition to audio and video signals can be transmitted on it.
TV system : There are various systems for transmitting television signals, for example, PAL, SECAM, PAL BG, SECAM
DK, SECAM L/L, NTSC etc. The system used by your television depends on which country you are in.
TXT : Also known as Teletext, Fasttext, Videotext, FLOF etc.
OTR : One touch recording. This function enables you to select the switch-off time in intervals of 30 minutes.
25
3103 166 26421
0073/011
(WwnnNNNwwnwNNnwnWwnNnwWnNNwnnW)
14PV330/07-14PV334/335/07
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project