Philips 14PV365/07 TV VCR Combo User Manual

Philips 14PV365/07 TV VCR Combo User Manual
PAL I(EN).qx3
02.4.2
6:42 PM
Page 2
Table of Contents
6. Manual recording . . . . . . . . . . . . . . . . . . .
General information . . . . . . . . . . . . . . . . .
Recording without automatic switch-off . .
Recording with automatic switch-off
(OTR One-Touch-Recording) . . . . . . . . . .
Preventing accidental erasing of cassettes
Lining up recordings (assemble cut) . . . .
Selecting the recording speed (SP or LP)
Automatic controlled recording from
a satellite receiver (RECORD LINK) . . . .
1. Connecting the TV-Video Combi . . . . . . . . . . .3
Important for the United Kingdom . . . . . . . . . .3
Preparing the remote control for operation . . . . .3
Connecting the cable . . . . . . . . . . . . . . . . . . . . .3
Connecting additional devices . . . . . . . . . . . . . .3
2. Important notes for operation . . . . . . . . . . . . . .4
Navigation in the screen menu . . . . . . . . . . . . .4
3. Installing your TV-Video Combi . . . . . . . . .
Preparation for use . . . . . . . . . . . . . . . . . .
Decoder allocation . . . . . . . . . . . . . . . . . .
Manual TV channel search . . . . . . . . . . . .
Using the satellite receiver . . . . . . . . . . . . .
Automatic Tuning . . . . . . . . . . . . . . . . . . . .
Sorting and clearing TV channels manually
Setting the language . . . . . . . . . . . . . . . . .
Setting the clock . . . . . . . . . . . . . . . . . . . .
.
.
.
.
.
.
.
.
.
. . .5
. . .5
. . .5
. . .6
. . .6
. . .6
. . .7
. . .7
. . .7
4. TV set functions . . . . . . . . . . . . . . . . . . . . . . .
Selecting a TV channel . . . . . . . . . . . . . . . . . .
Selection of the scart socket . . . . . . . . . . . . . .
Selection of the front A/V sockets . . . . . . . . . .
Volume control . . . . . . . . . . . . . . . . . . . . . . . .
Picture settings . . . . . . . . . . . . . . . . . . . . . . . .
How do I read TELETEXT? . . . . . . . . . . . . . . .
Special TELETEXT functions . . . . . . . . . . . . . .
Changing the picture setting with SMART Picture
Switch off function (SLEEP TIMER) . . . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.12
.12
.12
.13
. . . .13
7. Programming a recording (TIMER) . . . . . . . . .14
General information . . . . . . . . . . . . . . . . . . . . .14
Programming a recording with 'VIDEO Plus+®
system' . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .14
Problems and solutions for programmed
recordings . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Programming a recording
(without VIDEO Plus+ system) . . . . . . . . . . . . .15
How to check, change or delete a programmed
recording (TIMER) . . . . . . . . . . . . . . . . . . . . . .16
How to change a programmed
recording(TIMER) . . . . . . . . . . . . . . . . . . . . . .16
.8
.8
.8
.8
.8
.8
.8
.8
.9
.9
8. Other functions . . . . . . . . . . . . . . . .
Switching the status display off or on
Continuous playback . . . . . . . . . . . .
Blue Background on or off . . . . . . . .
Palental control(Child lock) . . . . . . .
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.
.17
.17
.17
.17
.18
9.Before you call an engineer . . . . . . . . . . . . . . .18
5. Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Playing cassettes . . . . . . . . . . . . . . . . . . . . . .10
Playing back NTSC cassettes . . . . . . . . . . . . .10
Displaying current tape position . . . . . . . . . . . .10
Searching for a tape position
with picture(scanning) . . . . . . . . . . . . . . . . . . .11
Still picture . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Searching for tape position without picture
(forward wind and rewind) . . . . . . . . . . . . . . . .11
Automatic search for a tape
position (index search) . . . . . . . . . . . . . . . . . .11
Manual Tracking . . . . . . . . . . . . . . . . . . . . . . .11
EN
. . . .12
. . . .12
. . . .12
2
PAL I(EN).qx3
02.4.2
6:42 PM
Page 1
TVCR
14PV360/07
14PV365/07
PAL I(EN).qx3
IN BRIEF
The remote control
CLEAR To delete last entry/Clear programmed recording
(TIMER).
EJECT
STATUS/EXIT
1
CLEAR
2
4
5
7
8
STILL To stop the tape and show a still picture.
3
P+
P- To select the programme number. During normal or
slow motion playback, press to adjust the tracking or vertical jitter.
6
9
To eliminate the sound. Press again to restore the volume.
5 K 5 L To adjust the volume.
0
STILL
RECORD/OTR
SYSTEM Doesn’t work in these models.
SLEEP To select the switch-off time in 30 minutes intervals.
To switch TELETEXT on or off,or transparent mode.
TEXT
o
l
p
P+
MUTE
SV/V+ SMART PICTURE
INDEX
TEXT
?
o
l
p
0..9 Press to select channels.
B 1 When tape playback is stopped, press to fast forward the tape at hight speed.
During playback, press to fast forward the tape while the picture stay on the screen. To
store or confirm entry in the menu. Press to adjust the controls of TVCR menu.
SYSTEM
SLEEP
P-
To call up main menu of TVCR.
p
l
o
: enlarge font
: switch TELETEXT decoder off temporarily
: Doesn’t work in these models.
: recall hidden information
p
l
o : stop page changes
: go back to start page.
SV/V+ Red button / To programme recordings with VIDEO
Plus+ system or to alter / clear programmed TIMER recordings.
Select TELETEXT function when you are in TELETEXT mode.
SMART PICTURE Green button / To call up preset picture
settings.Select TELETEXT function when you are in
TELETEXT mode.
Yellow button/ Select TELETEXT function when you are in
TELETEXT mode.
INDEX Blue button / Search for the previous/next recording
code on the tape in combination with s 0 / B 1 . Select
TELETEXT function when you are in TELETEXT mode.
s 0 When tape playback is stoped, press to rewind the tape at high speed. During
playback, press to rewind the tape while the picture stay on the screen.To return the
cursor in the menu. Press to adjust the controls of TVCR menu.
K B To play a tape, select an item in the menu of TVCR.
L C To stop the tape, select an item in the menu of TVCR.
Page 3
MUTE
MENU
STATUS/EXIT To access or remove the TVCR’s on-screen status display. To exit onscreen menus.
6:42 PM
RECORD/OTR I To record the TV channel selected at this
moment or press repeatedly to start a One-Touch Recording.
STANDBY/ON
MENU
STANDBY/ON y To switch TVCR On or Off or to interrupt menu function.
02.4.2
EJECT A To eject the cassette.
Back of the set
Front of the device
STANDBY
Power switch: To switch the TV-Video Combi off.
Caution: If you switch off using the power switch, TIMER-recordings are impossible!
Aerial input socket: To connect the aerial cable.
EXT1/AV1 Scart socket :To connect a satellite receiver, decoder, video recorder, etc.
y Standby/on: To switch TVCR On or Off or to interrupt a menu function.
PAL I(EN).qx3
02.4.2
6:42 PM
Page 4
5 Volume: In connection with the button + , – to adjust the volume.
P-
Programme number minus: previous programme number
P+
Programme number plus: next programme number
I Record: To record the programme currently selected.
B
Playback: To play a recorded cassette.
C/A
A Pause/Stop, eject cassette: To stop the tape; If this key is depressed while in
STOP, the cassette is then ejected from the machine.
1 When tape playback is stopped, press to fast forward the tape at high speed.
0 When tape playback is stoped, press to rewind the tape at high speed.
Sockets on the front:
White socket / AUDIO input socket: To connect a camcorder or video games (audio).
Yellow socket / VIDEO input socket: To connect a camcorder or video games (video).
Small socket /
socket for headphones: To connect headphones.
The control lights at the front of machine
STANDBY
Standby LED: lights up when the TV-Video Combi has been switched On
by means of the main switch.
RECORD
Recording LED: lights up during recording.
Fast blink: RECORDING PAUSE; TIMER RECORDING NOT STAND-BY.
Slow blink: TIMER RECORDING is stored in a timer block.
PAL I(EN).qx3
02.4.2
6:42 PM
Page 1
OPERATING INSTRUCTIONS
These operating instructions have been
printed on non-polluting paper.
Deposit old batteries at the appropriate collection points.
Please make use of the facilities available in
your country for disposing of the packaging
of the TV-Video combi in a way that helps to
protect the environment.
This electronic device contains many materials that can be recycled. Please enquire
about the possibilities for recycling your old
device.
Thank you for buying a Philips TV-Video combi.
This TV-Video combi is one of the most sophisticated and easy-to-use TV-Video combi on the
market. Please take the time to read this operating manual before using your TV-Video combi. It
contains important information and notes regarding operation. The TV-Video combi should not
be turned on immediately after transportation
from a cold to a hot area or vice versa, or in conditions of extreme humidity. Wait at least three
hours after transporting the device. The TVVideo combi needs this time in order to become
acclimatised to its new environment (temperature, air humidity, etc.).
VIDEOPlus+ and PlusCode are registered
trademarks of Gemstar Development
Corporation. The VIDEOPlus+ system is
manufactured under license from Gemstar
Development Corporation.
PAL
This TV-Video combi is used for the recording
and playback of VHS videocassettes. Cassettes
with the VHS-C label (VHS cassettes for camcorders) may only be used with a suitable
adapter.
We hope you enjoy your new TV-Video combi.
So that you can identify your machine for service
questions or in the event of theft, enter the serial
number here. The serial number (PROD.NO.) is
printed on the type plate fixed at the back of the
device.
MODEL NO. : 14PV360/07, 14PV365/07
Important notes regarding operation
PROD. NO.
" Danger: High voltage!
There is a risk of an electrical shock!
...........................
This product complies with the requirements of
Directive 73/23/EEC +89/336/EEC +93/68 EEC.
" The TV-Video combi does not contain any
components that can be repaired by the
customer. Please leave all maintenance
work for qualified personnel.
Interference
The Department of Trade and industry operates a
Radio lnvestigation Service to help TV licence holders improve reception of BBC and ITC programmes
where these are being spoilt by interference.
If your dealer cannot help, ask at a Main Post Office
for the booklet 'How to lmprove Television and Radio
Reception'.
" As soon as the TV-Video combi is connected to the power supply, some components
are in constant operation. To-switch off the
TV-Video combi completely you must disconnect it from the mains or switch it off
with the main switch.
! Make sure that air can circulate freely
Specifications
through the ventilation slots on the TV-Video
combi. Do not place the device on an
unsteady base.
Voltage: 230-240V/50Hz
Power consumption : 52W
Power consumption (Standby): less than 4W
Rewind time: less than 85 seconds (cassetteE-180)
Weight without packing in kg: 11.5
Dimensions in cm/ft (HxWxD):
40.0x37.3x38.0/ 1.37x1.27x1.3
Number of video heads : 2
Recording/playback time: 3 hours (SP)
(cassette E-180)
6 hours (LP) (cassette E-180)
! Make sure that no objects or liquids enter
the TV-Video combi. Do not place vases or
the like on the TV-Video combi. If liquid is
spilt into it, immediately disconnect the TVVideo combi from the power supply and call
After-sales Service for advice.
! Do not place any combustible objects on
the device (candles, etc.).
Supplied accessories
! Make sure that children do not place any
• Operating instructions
• Remote control and batteries
foreign objects within the openings or ventilation slots.
1
EN
PAL I(EN).qx3
02.4.2
6:42 PM
Page 3
1. Connecting the TV-Video Combi
1. Take the remote control and the enclosed
Important for the United Kingdom
batteries (2 batteries).
2. Open the remote control's battery compart-
This apparatus is fitted with an approved 5 Amp plug.
To change a fuse in this type of plug proceed as follows:
1. Remove fuse cover and fuse.
2. Fix new fuse which should be a BS1362
5A,ASTA or BSI approved type.
3. Refit the fuse cover.
If the fitted plug is not suitable for your socket
outlets, it should be cut off and an appropriate
plug fitted in its place.
If the mains plug contains a fuse, this should
have a value of 5A. If a plug without a fuse is
used, the fuse at the distribution board should
not be greater than 5A.
ment and place the batteries in it as shown in
the picture and close the battery compartment.
The remote control is now ready to use.
Its range is approximately 7 metres.
Connecting the cable
The severed plug must be destroyed to avoid a
possible shock hazard should it be inserted into a
13A socket elsewhere.
1. Insert the aerial cable plug into the AERIAL
How to connect a plug:
The wires in the mains lead are coloured in
accordance with the following code:
BLUE- 'NEUTRAL' ('N')
BROWN- 'LIVE' ('L')
4. The BLUE wire must be connected to the terminal which is marked with the letter 'N' or
coloured BLACK.
5. The BROWN wire must be connected to the
terminal which is marked with the letter 'L' or
coloured RED.
6. Do not connect either wires to the earth terminai in the plug which is marked with the letter 'E' or by the safety earth symbol
or
coloured green or green-and-yellow.
Before replacing the plug cover, make certain
that the cord grip is clamped over the sheath of
the lead-not imply over the two wires.
at the back of the TV-Video Combi.
2. Connect the mains cable to the wall socket.
3. If the little red standby light (STANDBY ) at
the front panel of the set is not lit, please
switch on the set using the main power
switch. The power switch
is located on the
left side panel of the set.
This text will appear on the TV screen.
PLEASE CONNECT AERIAL OR
CABLE TO THE TVCR
THEN...
PUSH P+ KEY
OR...
FOR PLAY ONLY PUSH PLAY
You can find more details in chapter 'Preparation
for use'.
Connecting additional devices
Preparing the remote control for
operation
You can connect additional devices such as
decoders, satellite receivers, camcorders, etc. to
the EXT1 socket.
The remote control and its batteries are packed separately in the original TV-Video Combi packaging. You
must install the batteries in the remote control before
use.
The respective scart socket is usually marked
'AV' or 'TV' on the decoder or satellite receiver.
3
EN
PAL I(EN).qx3
02.4.2
6:42 PM
Page 4
2. Important notes for operation
Switching on
You can switch TV-Video Combi on with
STANDBY/ON y .
Power outage/no power
Channel information remains saved for up to 10
year, the time and timer information is saved for
up to 1 minute.
Navigation in the screen menu
You can check/change many functions and settings of your TV-Video Combi via on-screen
menu. The individual functions are selected, via
the remote control as follows:
Call up the menu: with MENU .
To select: with K B L C .
To enter or change your selection: with the
number buttons 0..9 or with K B L C .
To save or confirm: with B 1 .
To cancel: with CLEAR .
To end: with STATUS/EXIT .
SELECT K L CHOOSE B
→TIMER
PICTURE CONTROL
RECORD SET UP
VCR SET UP
TUNER SET UP
GENERAL SET UP
END=EXIT
EN
4
PAL I(EN).qx3
02.4.2
6:42 PM
Page 5
3. Installing your TV-Video Combi
Preparation for use
Decoder allocation
1. After you have connected the aerial or cable,
Some TV channels transmit encoded TV signals
which can only be viewed with a commercially
purchased or rented decoder without disturbances. You can connect such a decoder to this
TV-Video Combi. The following function will automatically activate the connected decoder for the
desired TV channel.
confirm the picture on the TV screen with
B1 .
Connecting additional devices
After you have connected additional devices
(satellite receiver, etc.) through the aerial cable,
switch them on. The automatic channel search
will recognise them and save them.
P+ , P- or 0..9 to select the TV channel which you would like to allocate the
decoder to.
2. Press MENU . The main menu will appear.
3. Use K B L C to select 'TUNER SET UP'.
Then press B 1 .
4. Use K B L C to select 'MANUAL TUNING'.
Then press B 1 .
5. Use K B L C to select 'DECODER'.
1. Use
2. The automatic TV channel search starts.
This picture will appear on the screen.
PLEASE WAIT
START
FINISH
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
MANUAL TUNING
PROG.
CHANNEL
→DECODER
SKIP
When automatic TV channel search is complete,'AUTO TUNING COMPLETE' will
appear on the TV screen.
3. 'TIME' and 'DATE' will appear on the TV
screen.
P55
055
[OFF]
[OFF]
SELECT K L CHOOSE B
END=EXIT
6. Use
B 1 to select 'ON'
(Decoder switched on).
TIME --:-DATE --/--/--
How can I switch off the decoder?
Use B 1 to select 'OFF' (Decoder switched
off).
SMART CLOCK [ON]
END=EXIT
7. To end, press STATUS/EXIT .
The decoder has now been allocated to this TV
channel.
4. Check 'TIME'. If required, please change the
time with the number buttons
0..9
.
5. Check if the displayed settings for 'DAY',
'MONTH' and 'YEAR' are correct.
6. When all information is correct, save by
pressing STATUS/EXIT .
The preparation for use is now complete.
Satellite receiver
If you are connecting a satellite receiver, please
read the section 'Using the satellite receiver'.
Decoder
If you are connecting a decoder, you must
install it as described in the next section.
5
EN
PAL I(EN).qx3
02.4.2
6:42 PM
Page 6
Manual TV channel search
Using the satellite receiver
In some cases it could occur that all of the TV
channels were not found and saved during the
Preparation for use. In this case, the missing or
coded TV channels must be searched for and
stored manually.
You can receive channels from the satellite
receiver via the scart socket AV1/EXT1 .
To do this, select the channel number 'AV1' by
pressing 0,0,1, with the keys 0..9 on the remote
control.You will have to select the channel you
want to receive on the satellite receiver itself.
1. Press MENU . The main menu will appear.
2. Select 'TUNER SET UP' with K B L C and
confirm with
B1
.
3. Select 'MANUAL TUNING' with
and confirm with B 1 .
4. Select 'PROG.' with K B
B1 .
LC
Automatic Tuning
KB
LC
During installation, all available TV channels are
searched for and saved. If you want to replace
the TV channels already saved with the new
ones, follow the instructions below.
1. Press MENU . The main menu will appear.
. Then press
MANUAL TUNING
→PROG.
CHANNEL
DECODER
SKIP
2. Select 'TUNER SET UP' with
P55
055
[OFF]
[OFF]
confirm with B 1 .
3. Select 'AUTO TUNING' with
confirm with B 1 .
KB
KB
LC
LC
and
and
SELECT K L CHOOSE B
END=EXIT
5. With
K B L C or 0..9 , select the desired
programme number that you want to use for
the TV channel, e.g. 'P01'. Then press B 1 .
PLEASE WAIT
START
6. Select 'CHANNEL' with
4. The automatic TV channel search starts. This
allows the TV-Video Combi to save all available TV channels. This procedure may take
several minutes.
5. When the TV channel search is complete,
'AUTO TUNING COMPLETED' will briefly
appear on the TV screen.
, and confirm with
. Then enter the desired channel with 0..9 .
When a channel is found,it will stop searching. If
this is the channel you want, press B 1 . If you
set 'SKIP' on for a channel, this channel will be
ignored when going through the channels with
P+ or P– .
To search for other TV channels, begin again at
step 4.
KB
FINISH
❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚❚
What is a special channel?
TV channels are transmitted in certain pre-defined
frequency ranges. These ranges are divided into
channels.
A specific frequency/channel is assigned to each
TV station.
Certain frequency ranges are specified as special
channels (hyperband channels).
LC
B1
I don't know the channels for my TV stations In
this case, press K B L C in 'CHANNEL' to start
the automatic channel search. A changing channel
number will appear on the TV screen. Continue the
automatic search until you have found the desired
TV channel.
7. To end, press
EN
STATUS/EXIT
.
6
6
PAL I(EN).qx3
02.4.2
6:42 PM
Page 7
Sorting and clearing TV channels
manually
Setting the clock
If the display shows an incorrect time or ' --:-- '
the time and date must be reset manually.
1. Press MENU . The main menu will appear.
You can use this function to individually sort the
TV channels already saved or to delete unwanted TV channels or those with poor reception.
2. Select 'GENERAL SET UP' with
The clock resets automatically
If you save a TV channel that transmits TXT/PDC
on programme number ‘P01’, date and time will
and constantly be updated. As a result, time
changes, i.e. daylight savings time, will be set
automatically.
and confirm with B 1 .
3. Select 'CLOCK' with K B
with B 1 .
confirm with
B1
with
B1
SMART CLOCK [ON]
.
KB
LC
, and confirm
END=EXIT
.
→P01: 02
P06:
P02: 03
P07:
P03: 05
P08:
P04: 10
P09:
P05: 74
P10:
SELECT K L CHOOSE
END=EXIT
4. Check the time in 'TIME'. If required, please
change the time with
90
99
121
124
130
B
0..9
.
5. Check 'DAY', 'MONTH' and 'YEAR' in the
same way.
6. Choose 'SMART CLOCK' ON or OFF with
B1
.
Time/date is displayed incorrectly despite
manual setting
* With Smart Clock, if you save a TV channel
that transmits TXT/PDC on programme number 'P01', date and time will automatically be
, select the saved TV channel
that you want to move.
5. Confirm with B 1 .
6. Move the selected channel with K B L C to
the programme number you want to assign.
Then pless B 1 . The programme number
will change to '_ _'.
7. Confirm with B 1 .
8. To assign other TV channels to a programme
number, repeat steps 4 to 7.
9. Confirm the assignment of the TV channel
with MOVE menu.
10. To exit the MOVE menu, press STATUS/EXIT .
KB
and confirm
DATE --/--/--
MOVE
4. With
LC
TIME --:--
1. Press MENU . The main menu will appear.
2. Select 'TUNER SET UP' with K B L C and
3. Select 'MOVE' with
LC
KB
LC
updated when the TV-Video Combi is in Standby.
If you wish to switch this automatic time correction off, select 'OFF' for Smart Clock. You
can reactivate this function at any time by
selecting Smart Clock 'ON'.
7. To end, press
7
STATUS/EXIT
.
EN
PAL I(EN).qx3
02.4.2
6:42 PM
Page 8
4. TV SET FUNCTIONS
.
3. Select an item using
Selecting a TV channel
Select the desired TV channel (= the programme
number) with P+ , P- or with 0..9 on the
remote control.
LC
, and then
SELECT K L ADJUSTE s/ B
BRIGHTNESS
CONTRAST
COLOUR
SHARPNESS
TINT
Selection of the scart socket
To select the Scart socket, please enter 0,0,1,
with the keys 0..9 on the remote control. AV1
appears on the screen.
<
<
<
<
<
>
>
>
>
>
END=EXIT
'TINT' appars only when playing a tape recorded
with NTSC system or receiving NTSC signals
from another source.
Selection of the front A/V sockets
To select the front A/V sockets, please enter
0,0,2, with the keys 0..9 on the remote control.
'AV2' appears on the screen.
How do I read TELETEXT?
Many TV channels transmit TELETEXT information along with their TV channels. With this TVVideo Combi you can retrieve this information
and display it on the screen using the built-in
TELETEXT decoder.
to switch the TELETEXT
1. Press TEXT
decoder on. Your TV-Video Combi will now
show TELETEXT for the TV channel you
have selected. Press TEXT
again to show
TELETEXT in transparent mode.
2. If you want to select another page, type in the
number of the page with the number buttons
0..9 on the remote control.
Volume control
You can adjust the volume using 5 K , 5 L on
the remote control.
If you would like to change the volume on the
machine, press 5- or 5+ on the TV-Video
Combi.
If you want to mute the sound temporarily
(e.g.:during a telephone call), press MUTE on
the remote control. When you press MUTE
again, the sound will return at its original volume level.
With the colour buttons on your remote control
you can directly select the page numbers
shown at the bottom of the TV screen.
The button
takes you back to the start
page.
Picture settings
3. Press
TEXT
to switch the TELETEXT
decoder off.
The picture can be adjusted according to your
personal preferences.
These settings are automatically stored after
exiting the main menu.
1. Press the MENU . The main menu will
appear.
2. Select 'PICTURE CONTROL' with K B
L C and confirm with B 1 .
EN
KB
modify with s 0 B 1 .
4. To end, press STATUS/EXIT .
Special TELETEXT functions
In TELETEXT mode you can use the special
TELETEXT functions.
o
l
p : enlarge font
: switch TELETEXT decoder off
temporarily
: recall hidden information
p
l
o : stop page changes
: go back to start page
8
PAL I(EN).qx3
02.4.2
6:42 PM
Page 9
Changing the picture setting with
SMART Picture
If you would like to turn this function off, press
SLEEP on the remote control several times until
switch-off appears. '--:--' will appear on the
screen.
To check the time until switch-off, press SLEEP
on the remote control.
If a recording is in process, switch-off function
will be cancelled.
You can change the picture setting during playback.
1. Press SMART PICTURE to show the current picture setting.
2. Press SMART PICTURE again to select the picture setting of your choice.
'NATURAL': for all types of movies (natural pic
ture.)
'SPORTS': use to watch a sports program.
'MOVIE': use to watch a movie.
'WEAK SIGNAL': use when the picture is
weak.
'VIDEO GAMES': use when playing a video
game.
Switch-off function (SLEEP TIMER)
You can programme your set to switch-off automatically after a predetermined period.
1. Press SLEEP .
The screen will show the time remaining until
switch-off, e.g.: '+0:30'.
2. Press SLEEP repeatedly to extend the time
until switch-off in 30 minute increments.
The machine now counts backwards to the
switch-off time.
The maximum time period to be set until switchoff is 2 hours.
9
EN
PAL I(EN).qx3
02.4.2
6:42 PM
Page 10
5. Playback
Playing cassettes
Playing back NTSC cassettes
You can use this TV-Video Combi to playback
recorded VHS video cassettes. You can operate
the TV-Video Combi using the remote control or
the buttons on the set.
Your TV-Video Combi can only record and play
standard VHS cassettes.
1. Put a cassette into the cassette slot. The cassette is inserted automatically.
Cassettes that have been recorded in the NTSC
standard (for example, American cassettes) can
be played back using this TV-Video Combi.
Displaying current tape position
The following information is displayed on the
screen: e.g.: 0:02:45 shows the counter in hours,
minutes and seconds.
SP/LP: will show the recorded speed of your
cassette.
'REM 0:06': will show the actual amount of playing/recording time left on the tape in hours and
minutes.
When you play an NTSC cassette, the TV-Video
Combi will show 'REM -:--'.
DIGITAL STUDIO PICTURE CONTROL
Philips has developed a system which produces
the best possible playback quality. For old and
often-used video cassettes, this system reduces
interference. For new or high quality cassettes,
it emphasises the details.
Picture/ sound quality is poor
When playing rental videos or older, poorer
quality cassettes, it may not be possible to completely filter out picture and sound interference.
This is not a fault in your machine. Read the
section 'Manual tracking'.
How can I set the counter to '0:00:00'?
You can set the counter to '0:00:00' with
CLEAR .
When you put a cassette in the TV-Video
Combi, the counter will automatically reset to
'0:00:00'.
2. Press K B to view the tape.
3. To stop the playback, press L C or
A on
C/A
the TV-Video Combi.
A
4. To eject the cassette, press EJECT A or C/A
when the TV-Video Combi stops the playback.
The counter does not move
This occurs when there are no recordings on a
portion of a tape. This is not a fault in your TVVideo Combi.
The screen shows '-0:01:20'
If you rewind a cassette from the tape position
'0:00:00', the counter will show for instance,
'-0:01:20' (the cassette was rewound to 1
minute and 20 seconds before '0:00:00').
'-:--' is displayed in the 'REM' counter
This counter will automatically recognise the
length of the tape. In addition, when you put in
a cassette the TV-Video Combi must first calculate the time played. Therefore, '-:--' appears
first and only after the tape has been running
for a few seconds, the correct playing time will
be shown.
Do I need to change the playback speed
when playing back LP recordings?
During playback, the correct speed will automatically be selected. For more information,
please read the section 'Selecting the recording
speed (SP or LP)' in the chapter 'Manual
recording'.
EN
10
PAL I(EN).qx3
02.4.2
6:42 PM
Page 11
Searching for a tape position with
picture (scanning)
1. While a cassette is playing, press
Manual Tracking
To adjust the tracking manually, press P+ or
P- on the TV/VCR during playback.
Tracking returns to Automatic Tracking
Adjustment when you press L C or insert a
tape.
s0
(reverse) or B 1 (forward) one or more
times.
2. Press K B to resume playback.
Still picture
1. During playback, press
STILL 2 to stop the
tape and display a still picture.
2. To continue playback, press K B .
Scanning and still motion interferes with the picture quality. The sound is switched off. This is not
a fault in your TV-Video Combi.
Searching for tape position without
picture (forward wind and rewind)
1. Stop the tape with L C .
2. Press s 0 (reverse) or B 1 (forward).
3. To stop the tape, press L C .
Automatic search for a tape position
(index search)
Every time a tape is recorded an index marking
is written on the tape.
These marked positions can be found again
quickly and easily later.
1. To search for the previous marking, press
INDEX and then s 0 .
2. For the next marking, press INDEX and then
B1 .
3. As soon as the TV-Video Combi finds this
marking, it automatically switches to playback.
11
EN
PAL I(EN).qx3
02.4.2
6:42 PM
Page 12
6. Manual recording
General information
Recording with automatic switch-off
(OTR One-Touch-Recording)
Use 'Manual Recording' to make a spontaneous recording (for example, a programme currently being shown).
If you want to start and stop a recording manually, read the section 'Recording without automatic switch-off'.
If you want to start a recording manually but
have it stopped automatically, read the section
'Recording with automatic switch-off'. (e.g.
not to record to the end of the tape)
Read the section 'Automatic recording from a
satellite receiver', if you want a recording to be
controlled automatically by a satellite receiver.
1. Insert a cassette.
2. Use P+ P- or
0..9 to select the programme number you want to record.
3. Press RECORD/OTR I .
4. Each time you press RECORD/OTR I you will
add 30 minutes to the recording time.
Preventing accidental erasing of
cassettes
All cassettes (except for rental and pre-recorded
purchased cassettes) have a security tab on the
back of the cassette.
To prevent recording
over important recordings (erasing), you can
remove this security tab.
If you later decide to
record on a protected
cassette, simply cover the hole with adhesive
tape.
Recording without automatic
switch-off
1. Insert a cassette.
2. Use P+ P- or
0..9 to select the programme number you want to record, for
example, 'P01'.
3. To start recording, press RECORD/OTR I .
4. To stop recording, press L C .
Lining up recordings (assemble cut)
When you add a further recording to a cassette,
which already has a recording on it, a short
blank (flicker) can appear between the old and
the new recording or the picture itself can flicker.
To help reduce these from occurring, proceed as
follows:
1. Find the tape position of the old recording
where you want to insert the new recording.
2. Look at the last minute of the old recording
(playback).
3. Press STILL 2 at the tape position where
the new recording is to go and press
RECORD/OTR I .
4. Now start recording as usual by pressing
RECORD/OTR I on the remote control.
5. Stop recording with L C .
EN
12
PAL I(EN).qx3
02.4.2
6:42 PM
Page 13
Selecting the recording speed (SP
or LP)
Automatic controlled recording from
a satellite receiver (RECORD LINK)
LP allows to double the recording duration on tape
(for example six hours instead of three hours on a
E180 cassette).
1. Press MENU . The main menu will appear.
This function automatically starts recording on the
switched-off TV-Video Combi when a video signal is
recognised through the connected scart cable. If
your satellite receiver has a programming function,
the recording will start automatically (as long as the
satellite receiver is switched on).
2. Select 'RECORD SETUP' with
and confirm with
B1
KB
LC
KB
LC
.
3. Select 'RECORD SPEED' with
1. Press MENU . The main menu will appear.
2. Select 'RECORD SET UP' with K B L C
.
and confirm with
SELECT K L CHOOSE B
→RECORD SPEED
RECORD LINK
B1
.
3. Select 'RECORD LINK' with K B
4. Select function 'ON' with B 1 .
[SP]
[OFF]
LC
.
SELECT K L CHOOSE B
END=EXIT
RECORD SPEED
→RECORD LINK
[SP]
[OFF]
4. Select the required recording speed with
B1
.
5. To end, press
STATUS/EXIT
.
END=EXIT
5. To end, press STATUS/EXIT .
6. Programme the satellite receiver with the
SP'/'LP' /'AUTO'
'SP': StandardPlay (normal recording speed) offers
the usual first-class picture quality.
'LP': LongPlay (half recording speed, double
recording time). 6 hours can be recorded on a 3hour cassette (E180) with a somewhat reduced
picture quality.
'AUTO': AUTOmatic Long Play. If there is not
enough space on the tape to record a programmed recording in standard speed, the recording is automatically done in 'LP' (Longplay).
Otherwise, the recording speed will be 'SP'
(Standardplay).
required information (programme number of
the TV channel, start time, end time).
If necessary, please see the operating
instructions for your satellite receiver.
7. Insert a cassette.
The TV-Video Combi is now ready to record. The
beginning and end of the recording is controlled
via EXT1 socket.
13
EN
PAL I(EN).qx3
02.4.2
6:42 PM
Page 14
7. Programming a recording (TIMER)
3.Enter
the entire PlusCode number. This is up
3.
to 9 digits long and can be found next to the
start time of the TV programme in your TV
listing magazine. [e.g:1-234-5 or 1 234 5]
If you make a mistake, you can clear your
input with CLEAR .
General information
Use a TIMER programming to automatically start
and stop a recording at a later time or date. The
TV-Video Combi will switch to the right programme number and begin recording at the correct time. With this TV-Video Combi, you can preprogramme up to eight recordings within a period of one year. To make a programmed recording, your TV-Video Combi needs to know:
*the date you want to make the recording
*the programme number of the TV channel
*the start and stop time of the recording
*VPS or PDC on or off
This information is saved in a TIMER block.
PlusCode
No. :1 2 3 4 5
SET=VIDEO PLUS+
CORRECT=CLEAR
END=EXIT
SV/V+ .
4.Press
4.
5.Select
ONCE, DAILY, or WEEKLY recording
5.
with K B L C . Then press B 1 .
What is 'VPS/PDC'?
'VPS' (Video Programming System)/ 'PDC'
(Programme Delivery Control) are used to control the start and duration of TV channel recordings. If a TV programme starts earlier or ends
later than scheduled, the TV-Video Combi will
turn on and off at the correct time.
What do I need to know about 'VPS/PDC'?
Usually the VPS or PDC time is the same as
the start time. But if your TV guide shows a
VPS or PDC time which is different from the
programme’s scheduled start time, e.g. 20.10
(VPS/PDC 20.14), you must enter the VPS/PDC
time exact to the minute. If you want a start time
different from the VPS/PDC time, you must
switch VPS/PDC off.
PlusCode
→ONCE
DAILY
WEEKLY
SELECT K L CHOOSE B
END=EXIT
Selecting once/daily/weekly recordings
Using K B L C , select from the following
options:
'ONCE':
Recording once
'DAILY':
Repeated daily recordings (Monday
to Friday)
'WEEKLY.': Repeated weekly recordings (every
week on the same day)
Programming a recording with
'VIDEO Plus+ system®'
Prog No changes to ' - - '
* The entered PlusCode is incorrect.
Correct your input or end with STATUS/EXIT .
The following message appears on the
screen:'ERROR'
* The entered PlusCode is incorrect. Correct
your instructions or end with STATUS/EXIT .
* Check the time/date (see chapter 'Installing
your TV-Video Combi', section 'Setting the
clock').
* A daily recording was entered for the wrong
day. Daily programming can only be used for
recordings to be made from Monday to Friday.
The following message appears on the
screen:’TIMER NOT COMPLETED’
* The channel is wrong.
Thanks to this simplifed programming system,
you no longer need to tediously enter the date,
programme number, start and end time. All the
information needed for programming is contained in the PlusCode number. You can find this
PlusCode number in most TV listing magazines
written next to the concerned programme.
1. Press SV/V+ on the remote control.
2. Enter the entire PlusCode number. This number is up to 9 digits long and can be found
next to the start time of the TV programme in
your TV listing magazine. [e.g. 1-234-5 or 1
234 5]
EN
14
PAL I(EN).qx3
02.4.2
6:42 PM
Page 15
6 The decoded data appears after confirmation.
You can go back to change the data. Select the
corresponding input field using B 1 or CLEAR .
Programming a recording (without
VIDEO Plus+ system)
Change the data with 0..9 .
7. When all input data are correct, press
STATUS/EXIT . The programming is stored in a
TIMER block.
MENU . The main menu will appear.
1.Press
1.
2.Select
'TIMER' with K B L C . Then press
2.
B1 .
3.Select
ONCE, DAILY, or WEEKLY recording
3.
with K B L C . Then press B 1 .
Switching on 'VPS/PDC' in the 'START' input
field
Select 'VPS/PDC' using B 1 CLEAR . Press '1'
to switch off 'VPS/PDC' or press '2' to switch on
'VPS/PDC'.
SELECT K L CHOOSE B
→ONCE
DAILY
WEEKLY
TIMER LIST
8. Insert a cassette with an intact security tab
(unprotected).
END=EXIT
If all TIMER blocks are in use, 'FULL' will appear
on the TV screen.
4. Select TIMER block with 0..9 .
Selecting once/daily/weekly recordings
Use K B L C to select from the following
options:
'ONCE': Recording once
'DAILY': Repeated daily recordings from
Monday to Friday
'WEEKLY': Repeated weekly recordings (every
week on the same day)
Problems and solutions for programmed recordings
The TV-Video Combi will not operate
* If you want to cancel the programmed recordA.
ing, press C/A
Cassette is ejected during recording
* The end of the tape was reached during
recording.
Error message:
* If you forgot to insert a cassette,'INSERT
CASSETTE FOR TIMER RECORDING' will
appear.
* If, after pressing SV/V+ , the error message
'FULL' appears, then all TIMER blocks are
already programmed. No new recordings can
be programmed unless you clear a TIMER
block. To delete a Timer block, select it with
B 1 and L C in the Timer List screen and
erase it with CLEAR .
Cassette was ejected as soon as inserted.
* If a cassette with the security tab removed
was inserted, 'PROTECTED CASSETTE
TIMER CANNOT RECORD' will appear.
Undo the erase protection (chapter 'Manual
Recording', section 'Preventing accidental erasing of cassettes') or insert another cassette.
0..9 buttons you can enter 'START'
5.With
5.
(start time) , 'STOP' (end time) , 'PROG.' (programme number) ‘VPS/PDC’ and 'DATE'.
Programming a recording from the external
sources
You can also programme recording from an
external source via the Scart socket AV1 or the
front A/V connectors AV2.
6.When
all inputs are correct, press
6.
STATUS/EXIT . The programming information
is stored in a TIMER block.
7.Insert
a cassette with an intact security tab
7.
(unprotected).
15
EN
PAL I(EN).qx3
02.4.2
6:42 PM
Page 16
How to check, change or delete a
programmed recording (TIMER)
1. Press MENU . The main menu will appear.
2. Select 'TIMER' with K B L C . Then press
B1
.
3. Select 'TIMER LIST' with
confirm with
B1
KB
LC
, and
.
SELECT K L CHOOSE B
ONCE
DAILY
WEEKLY
→TIMER LIST
END=EXIT
4. Select timer block with B 1 .
5. To cancel the recording, press
6. To end, press STATUS/EXIT .
CLEAR
.
How to change a programmed
recording (TIMER)
1. Press MENU . The main menu will appear.
2. Select 'TIMER' with K B L C . Then press
B1
.
3. Select ONCE, DAILY, or WEEKLY recording
with
.
. (The flashing
number indicates an empty TIMER block.)
KB
LC
. Then press
4. Select a TIMER block with
B1
0..9
ONCE
TIMER - 1 2 3 4 5 6 7 8 -
SELECT TIMER NUMBER
END=EXIT
5. Press
CLEAR to delete information, and
input correct information with 0..9 .
6. To end, press STATUS/EXIT .
EN
16
PAL I(EN).qx3
02.4.2
6:42 PM
Page 17
8. Other functions
4. Select function 'ON' with B 1 .
If you select 'OFF', continuous playback will be
switched off.
5. To end, press STATUS/EXIT .
6. Insert a cassette.
7. Start the continuous playback with K B .
Switching the status display off or
on
Along with the on screen menu, the status display also displays information on the current
operating status (counter, playback, recording,
TV channel, etc.) on the TV screen.
1. Press MENU . The main menu will appear.
2. Select 'VCR SET UP' using K B L C and
confrim with B 1 .
3. Select 'STATUS DISPLAY' with K B L C .
Blue Background on or off
1. Press MENU . The main menu will appear.
2. Select 'VCR SET UP' using K B L C and
confrim with
LC
REPEAT PLAY
[ON]
→STATUS DISPLAY
[ON]
BLUE BACKGROUND[ON]
.
KB
.
SELECT K L CHOOSE B
REPEAT PLAY
[ON]
STATUS DISPLAY
[ON]
→BLUE BACKGROUND [ON]
END=EXIT
4. Select 'ON' or 'OFF' with
B1
3. Select 'BLUE BACKGROUND' with
SELECT K L CHOOSE B
B1
.
END=EXIT
Which settings can I choose?
'ON': Shows the status display for a few seconds only.
'OFF': Switches off the status display.
4. Select 'OFF' (no blue background) or 'ON'
5. To end, press
5. To end, press
STATUS/EXIT
(blue background on) with
.
STATUS/EXIT
B1
.
.
Continuous playback
This function can be used to play a cassette
over and over again. When the end of the cassette is reached, it will rewind and start from the
beginning again. This function is activated or
deactivated as follows.
1. Press MENU . The main menu will appear.
2. Select line 'VCR SET UP' using K B L C
and confirm with B 1 .
3. Select 'REPEAT PLAY' using K B L C .
SELECT K L CHOOSE B
→REPEAT PLAY
[ON]
STATUS DISPLAY
[ON]
BLUE BACKGROUND[ON]
END=EXIT
17
EN
PAL I(EN).qx3
02.4.2
6:42 PM
Page 18
1. Press
MENU .
The main menu will appear.
2. Use K B L C to select 'GENERAL SET
Parental control (Child lock)
This function protects your TV-Video Combi from
unwanted use. All button functions on the front of
the machine are blocked.
UP'. Then press B 1 .
3. Use K B L C to select 'CHILD LOCK'.
Programmed recordings will still be recorded (in
spite of the parental control) and cannot be
interrupted.
4. Use
B1
to select 'ON'.
'If a button at the front of the machine is pressed
while parental control is active, ’CHILD LOCK
ACTIVE’ will appear on the screen for a few seconds.
9. Before you call an engineer
If, contrary to expectation, you have any problems
using this TV-Video Combi, it may be caused by the
following reasons.
No recording possible
*The TV channel you want to record is not
stored or you selected the wrong programme
number: check TV channels stored.
*A cassette was inserted that does not have the
security tab (cannot be used to record): Insert
a cassette with an intact security tab or change
cassette. For more information, please see the
section ‘Preventing accidental erasing of cassettes’ in chapter ‘Manual Recording’.
*’VPS/PDC’ switched on but ‘VPS/PDC time’
wrong: enter ‘VPS/PDC time’ exactly to the
minute. Check your aerial connection.
The wrong TV channel has been recorded
after you programmed a recording using
PlusCode number
1.Enter the PlusCode number you wanted to
record.
2.Confirm with B 1 .
3.Check the programme number/channel name
in the ‘PROG.’ input field.
4.If this does not correspond to the desired TV
channel, select the input field and change the
programme number/channel name.
5.Confirm with B 1 .
Smart Clock does not work
*You have stored on programme number ‘P01’ a
TV channel that does not transmit TELETEXT.
Store on ‘P01’ a TV channel that transmits
TELETEXT.
*Poor TELETEXT reception. Store a TV channel
on ‘P01’ with good TELETEXT reception.
*You have not activated the Smart Clock function. Switch the function ‘ON’.
Your TV-Video Combi does not respond to any
button being pressed:
*There is no power supply: check the power supply.
*Parental control is on:Switch the parental control off.
*There is a technical problem: disconnect from the
mains power supply for 5 minutes, then power-up
again.
If this doesn't help, you can reset your TV-Video
Combi to default factory settings.
Resetting devices to default factory settings
*Warning: by doing so you will the information
stored (TV channels, time and date, TIMER)
will be cleared.
1.Switch the TV-Video Combi to stand-by.
2.Press and hold RECORD and P- at the
same time for 2 seconds or more.
Cassette is jammed in the TV-Video Combi
*Don’t use force. Disconnect the set from the
mains and reconnect it again after a few seconds.
Remote control does not work
*Remote control is not pointed at the TV-Video
Combi.
*Take out the batteries, wait for 10 seconds and
place them back in the remote control.
*Batteries have run out. Change the batteries.
No picture when you play a cassette
*There is no recording on the cassette.
Poor picture quality when you play a cassette
*The cassette is badly worn-out or of poor quality. Use a new cassette.
*Tracking is not properly adjusted. Turn to section ‘Manual Tracking’.
*Warning, if the tape quality is too bad, the
message ‘Use cleaning tape’ will permanently
appear on the TV screen. If, nevertheless, you
want to see the tape content, press P+ or
P- .
EN
You can also call the customer service centre
in your country.The telephone numbers can be
found on the back of this instruction manual.
Have the model number (MODEL NO) and the
production number (PROD.NO.) of your TVVideo Combi ready.
18
PAL I(EN).qx3
02.4.2
6:42 PM
Page 19
PHILIPS NORGE AS
Sandstuveien 70,
PO Box 1, Manglerud
N-0612 Oslo
NORWAY
Phone: 2274 8250
PHILIPS AUSTRIA GMBH
Triesterstrasse 64
1101 Wien
AUSTRIA
Tel: 0810 001 203
PHILIPS PORTUGUESA, S.A.
Consumer Information Centre
Rua Dr. António Loureiro Borge, nr. 5
Arquiparque, Miraflores
P-2795 L-A-VEHLA
PORTUGAL
Phone: 021-4163063
OY PHILIPS AB
Sinikalliontie 3,
02630 Espoo
FINLAND
puh. 09 615 80 250
PHILIPS INFO CENTER
Alexanderstrasse 1
20099 Hamburg
GERMANY
Tel: 0180-53 56 767
PHILIPS CE, The Philips Centre,
420 - 430 London Road,
Croydon, Surrey
CR9 3 QR
UNITED KINGDOM
Phone: 0208-665-6350
PHILIPS KUNDTJÄNST
Kottbygatan 7,
Akalla,
16485 Stockholm
SWEDEN
Phone: 08-598 52 250
SERVICE CONSOMMATEURS PHILIPS
BP 0101
75622 Paris Cédex 13
FRANCE
Phone: 0825-889 789
PHILIPS KUNDECENTER
Frederikskaj 6,
1780 København V
DANMARK
Tlf: 8088 2814
PHILIPS POLSKA
Al. Jerozolimskie 195B
02-222 Warszawa
POLSKA
TEL.: (022)-571-0-571
PHILIPS ELECTRONICS IRELAND LIMITED
Consumer Information Centre
Newstead, Clonskeagh
DUBLIN 14
Phone: 01-7640292
PHILIPS REPRESENTATION OFFICE
Ul. Usacheva 35a
119048 MOSCOW
RUSSIA
Phone: 095-937 9300
PHILIPS CONSUMER ELECTRONICS
Servizio Consumatori
Via Casati 23
20052 Monza - Milano
ITALY
Phone: 800 820026
PHILIPS INFO CENTER
Fegistrasse 5
8957 Spreitenbach
SUISSE
Tel.: 0844-800 544
PHILIPS MAGYARORSZÁG KFT.
Fehérvári út 84/a.
Budapest 1119
HUNGARY
Phone: (01)-382-1700
PHILIPS CUSTOMER CARE CENTER
Twee Stationsstraat 80/
80 Rue des Deux Gares
1070 BRUSSEL/BRUXELLES
BELGIUM (for BENELUX)
Tel: 070-222303
PHILIPS Iberia, S.A.
C/Martinez Villergas, 49
28027 MADRID
SPAIN
Phone: 902-11 33 84
PHILIPS CONSUMENTENLIJN
Postbus 102 5600 AC Eindhoven
NEDERLAND
Tel.: 0900-8406
19
EN
02.4.2
6:42 PM
Page 20
3143 025 20602 - EN
14PV360/07 14PV 365/07
PAL I(EN).qx3
0EMN01952
T6300EZ-I * * * *
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement