Philips 30PW8402/37 User manual

Philips 30PW8402/37 User manual
 sa ne
A
=
©
26PW 8402/37
30PW 8402/37
34PW 8402/37
30PW 8502/37
34PW 8502/37
Thank you for choosing Philips
Need help fast?
Read your User Manual first for quick tips that make
using your Philips product more enjoyable. If you have
read your instructions and still need assistance you may
access our online help at
www.p4c.philipscom
or
call 1-800-531-0039
while with your product.
Serial No.:
нос PHILIPS
3121 235 21791
Return your Product Registration Card today
to get the very most from your purchase.
Registering your model with FHILIPS makes you éligible for all of the valuable benefits listed below, so don't miss out.
Complete and return your Roduct Registration Card at once to ensure:
PHILIPS
Congratulations on your purchase,
and welcome to the “family!”
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT
REM OVE COVER (OR BACK). NO USER-SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This“bolt of lightning” indicates
uninsulated material within your unit
may cause an electrical shock. For the safe-
ty of everyone in your household, please
do not remove product covering.
The “exclamation point” cals aten-
tion to features for which you
should read the enclosed literature closely
to prevent operating and maintenance
problems.
CAUTION: To prevent electric shock,
match wide blade of plug to wide slot, fully
insert.
ATTENTION: Pour éviter les choc élec-
triques, introduire la lame la plus large de
la fiche dans la borne correspondante de la
prise et pousser jusqu'au fond.
Dear PHILIPS product owner:
Thank you for your confidence in PHILIPS You ve selected one of the
best -built, best-backed products walable today. We'll do everything in
our power to keep you happy with your purchase for many years to
come.
As a member of the PHILIPS“ family” youre entitled to protection by
one of the most comprehensive warranties and outstanding service
networks in the industry. W hat's more, your purchase guarantees
you'll receive all the information and special offers for which you
qualify, plus easy access to accessories from our convenient home
shopping network.
Most importantly, you can count on our uncompromising commit-
ment to your total satisfaction.
All of this is our way of saying welcome - and thanks for investing in
a PHILIPS product.
For Customer Use
Enter below the Serid No. which is
located on the rear of the cabinet. Retain
this information for future reference.
Model No.
Serial No.
PS. To get the most from your PHILIPS purchase, be
sure to complete and return your Product Registration
Card at once.
PHILIPS Visit our World Wide Web Ste at htto//www,philips.com
IMPORTANT SAFETY INSTRUCTIONS
Read before operating equipment
NENA
10.
11.
12.
13.
14.
15.
16.
Read these instructions,
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water,
Clean only with a dry cloth,
Do not block any of the ventilation openings, Install in accordance
with the manufacturers instructions.
Do not install near any heat sources such as radiators, heat regis-
ters, stoves, or other apparatus (including amplifiers) that produce
heat,
Do not defeat the safety purpose of the polarized or grounding-
type plug. A polarized plug has two blades with one wider than
the other, A grounding type plug has two blades and third ground-
ing prong. The wide blade or third prong are provided for your
safety, When the provided plug does not fit into your outlet, con-
sult an electrician for replacement of the obsolete outlet,
Protect the power cord from being walked on or pinched particu-
larly at plugs, convenience receptacles, and the point where they
exit from the apparatus.
Only use attachments/accessories specified by the manufacturer,
Use only with a cart, stand, tripod, bracket, or table
specified by the manufacturer, or sold with the app-
DY aratus, When a cart is used, use caution when moving
the cart/apparatus combination to avoid i injury from tip-over.
Unplug this apparatus during lightning storms or when unused for
long periods of time.
Refer all servicing to qualified service personnel, Servicing is
required when the apparatus has been damaged in any way, such
as power-supply cord or plug is damaged, liquid has been spilled
or objects have fallen into apparatus, the apparatus has been
exposed to rain or moisture, does not operate normally, or has
been dropped.
This product may contain lead and mercury. Disposal of these
materials may be regulated due to environmental considerations,
For disposal or recycling information, please contact your local
authorities or the Electronic Industries Alliance: www.eiae.org
Damage Requiring Service - The appliance should be serviced
by qualified service personnel when:
A. The power supply cord or the plug has been damaged: or
17.
Objects have fallen, or liquid has been spilled into the appli-
ance; or
The appliance has been exposed to rain; or
The appliance does not appear to operate normally or
exhibits a marked change in performance: or
The appliance has been dropped, or the enclosure damaged.
= 5 я
Tilt/Stability - All televisions must comply with recommended
international global safety standards for tilt and stability properties
of its cabinet design,
* Do not compromise these design standards by applying exces-
sive pull force to the front, or top, of the cabinet which could ulti-
mately overturn the product,
* Also, do not endanger yourself, or children, by placing electron-
ic equipment/toys on the top of the cabinet, Such items could
unsuspectingly fall from the top of the set and cause product dam-
age and/or personal injury.
. Wall or Ceiling Mounting - The appliance should be mounted to
a wall or ceiling only as recommended by the manufacturer,
. Power Lines - An outdoor antenna should be located away from
power lines,
Outdoor Antenna Grounding - If an outside antenna is connected to
the receiver, be sure the antenna system is grounded so as to provide
some protection against voltage surges and built up static charges,
Section 810 of the National Electric Code, ANSI/NFPA No. 70-
1984, provides information with respect to proper grounding of
the mast and supporting structure, grounding of the lead-in wire to
an antenna discharge unit, size of grounding connectors, location
of antenna-discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode. See Figure below.
Object and Liquid Entry - Care should be taken so that objects
do not fall and liquids are not spilled into the enclosure through
openings.
a) Warning: To reduce the risk of fire or electric shock, this appa-
ratus should not be exposed to rain or moisture and objects filled
with liquids, such as vases, should not be placed on this apparatus.
Battery Usage CAUTION - To prevent battery leakage that may
result in bodily injury, property damage, or damage to the unit:
* Install all batteries correctly, with + and - aligned as marked on
the unit,
* Do not mix batteries (old and new or carbon and alkaline, etc.).
+ Remove batteries when the unit is not used for a long time,
Note to the CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC
that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the
building as dose to the point of cable entry as practical.
Example of Antenna Grounding
as per NEC - National Electric Code
GROUND CLAMP
oT
Fe
ELECTRIC SERVICE EQUIPMENT
=
x
lo ANTENNA LEAD IN WIRE
ANTENNA DISCHARGE UNIT (NEC SECTION 810-20)
- GROUNDING CONDUCTORS (NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250, PART H)
CONTENTS
INTRODUCTION
Welcome/Registration of Your TV ..................... 2
Safety/Precautions .................. error. 2-3
Features RR RR ee 4
y INSTALLATION MENU
How to use the Language Controls ............... 5
How to use the Tuner Mode Controls ................... 5
How to use the Auto Program Controls ................. 6
How to use the Channel Edit Controls .................. 6
How to use the Name Controls ...................... 7-8
PICTURE MENU CONTROLS
How to use the Picture Menu Controls ............ 9
SOUND MENU CONTROLS
How to use the Sound Menu Controls ............ 10
FEATURE MENU CONTROLS
How to use the Timer Menu Controls ............ 11
How to use the AutoChronTM Control .................. 12
Understanding the AutoLockTM Controls ............... 13
Setting up an AutoLockTM Access Code ................ 14
How to lock channels using AutoLock™ ,.............. 15
How to clear all locked channels at the same time ........ 16
How to block programming using the Movie Ratings Controls .17
How to block programming using the TV Ratings Controls .18
Other AutoLockTM Blocking options .................. 19
Using the AutoLock™ Review screen ................. 20
How to use the Widescreen Format Control ............. 21
How to use the Closed Captioning Controls ............. 22
How to use the Rotation Control ..................... 23
How to use the Dynamic NR Control .................. 24
How to use the Permanent OSD ...................... 24
How to use the QuadraSurf™ Controls .............. 25-26
How to use the Program List Control .................. 27
How to use the Active Control feature ................. 27
How to use the Sleeptimer Controls ................... 28
How to use the Freeze Control ....................... 28
How to use the AutoPicture™ Control ................. 29
How to use the AutoSound™ Control .................. 29
REMOTE CONTROL RELATED FEATURES
Using the Remote Control with accessory devices
Mode Selection ............ ci. 30
Code-Entry Method .............................. 31
Direct-Entry Code list for accessory devices ......... 32-34
Remote Control Accessory Device Specific Buttons . ...... 35
IMPORTANT INFORMATION
IM Troubleshooting ............................ 36
=== Care and Cleaning .......................... 36
Index ....... LL La a ea a a ee a a ee a a ae a a aa 000 37
Factory Service Locations ........................ 38-39
Limited Warranty ................ i... 40
Features
Active Control™ continuously measures and corrects all incoming
signals to help provide the best picture quality. This feature moni-
tors and corrects both the sharpness control and noise reduction con-
trol.
Audio/Video Jack Panel allows direct connections with VCRs,
DVDs, or other devices, providing quality TV picture and sound
playback.
Audio Volume Leveler (AVL) Control keeps the TV sound at an
even level. Peaks and valleys that occur during program changes or
commercial breaks are reduced, making for a more consistent, com-
fortable sound.
AutoLockTM allows you to block the viewing of certain channels or
programs with certain ratings if you do not want your children to
view inappropriate materials.
AutoPicture™ allows you to change the picture settings (color, tint,
contrast, etc.) for various types of programming, such as sports,
movies, multimedia (games), or weak signals with the push of one
button.
AutoSound™ allows you to select from four factory-set controls
and a personal control that you set according to your own prefer-
ences through the onscreen Sound menu. The four factory-set con-
trols (Speech, Movie, Music, and Multimedia) enable you to tailor
the TV sound so as to enhance the particular programming you are
watching.
Channel Edit allows you to add or delete channels from the list
stored in the TV’s memory. Channel Edit makes it easy to limit or
expand the number of channels that are available to you when you
press the Channel (+) or (+) buttons on your remote control.
Closed Captioning allows the viewer to read TV program dialogue
or voice conversations as onscreen text.
Infrared Remote Control works your TV and other remote-con-
trolled devices, such as VCRs, DVD players, cable converters, and
satellite receivers.
Onscreen Menu shows helpful messages and instructions for set-
ting TV feature controls (can be viewed in English, French, or
Spanish).
Sleep Timer automatically turns the TV OFF after a set amount of
time that you choose.
Timer allows you to set your TV to tum itself ON and OFF once or
daily like an alarm clock.
As an Energy Star® Partner, Philips Consumer
7 Electronics has determined this product meets the
(оноу ре Energy Star® guidelines for energy efficiency.
Energy Star® is a U.S. registered mark. Using
products with the Energy Star® label can save energy. Saving
energy reduces air pollution and lowers utility bills.
Active Control, AutoPicture, AutoSound, AutoChron, and
Incredible Surround are trademarks of Philips Consumer
Electronics Company. Copyright 2001 Philips Consumer
Electronics.
*Manufactured under license from Dolby Laboratories. “Dolby”
and the double-D symbol are trademarks of Dolby Laboratories.
Quick USE AND SETUP GUIDE
Refer to the simple Quick Use and Setup |:
Guide (supplied with your TV) for details on
making Connections and Remote Control
Operation.
How To USE THE INSTALLATION FEATURES
LANGUAGE
Fer our Spanish and French-speaking TV own-
ers, an onscreen LANGUAGE option is pres-
ent. The LANGUAGE control enables you to set
the TV's onscreen menu to be shown in either
English, Spanish, or French.
À Press the MENU/SELECT button on the
\ remote control to show the onscreen menu.
SN Press the CURSOR DOWN button repeatedly
until Install is highlighted.
SN Press the CURSOR RIGHT button to shift
\ the menu to the left and highlight Language.
Press the CURSOR RIGHT button to high-
S
$
N т. .
&\ light the Language Control options.
N
м
SS Press the CURSOR DOWN or CURSOR UP
UN button to select English, Español (Spanish), or
CN
NN Francais (French).
Ses Press the STATUS/EXIT button to remove the
O menu from the screen.
№&
Note: Some
models may
show the
remote control
Remember, the LANGUAGE control makes only the YA he BIP
TV's onscreen MENU items appear in English, Spanish, labeled, there IPOD |
or French text. It does not change the other onscreen is no need to >
text features, such as Closed Captioning (CC), with TV EN Ни PHILIPS
shows Customer Call |
- enter or to
SRI VITA J
product to the
store.
TUNER MODE tu
7 he Tuner Mode allows you to change the Tv's Ade
signal input to Cable, Antenna, or Auto Mode. Fe
It’s important for the TV to know what hype of sig- Gia Sa de nep
nal is connected, either Antenna or Cable. UN PENN
Install NIE
«à Press the MENU/SELECT button on the Se
\ remote control to show the onscreen menu.
N
SN Press the CURSOR DOWN button repeated- Nery
& 1y until INSTALL is highlighted. (
ds q STE Ty NOD Ei
SN Press the CURSOR RIGHT button to shift AS Tan
© the menu to the left. es
\ Press the CURSOR DOWN button to select
Ks the Tuner Mode control.
N
> Press the CURSOR RIGHT button to high-
\ light the tuner options.
Se Press the CURSOR UP or CURSOR DOWN
UN to select Cable, Antenna, or Auto.
If Tuner Mode is set to Auto, Auto Program
will detect whether or not cable input 1s present.
0000 O
ot
4
и
rr,
(++ ©
E"
LI TTT || TY
5
'9 ООО
!
2 0000
E) 9 1) 63
Ñ =
SV Press the STATUS/EXIT button to remove the 2000 4 0
Alo Bayan
menu from the screen. PHILIPS tar 1 y
NN
$
S
Ñ
CR
© 53 E SE © | Тиле! Му «$ ÂNTE » |
en Cable is selected, channels 1-125 are available. CR
When Antenna is selected, channels 2-69 are available. | Ue Med SE > |
How TO USE THE INSTALLATION FEATURES
AUTO PROGRAM
You TV can automatically set itself for local
area (or cable TV) channels. This makes it
easy for you to select only the TV stations in your
area by pressing the CHANNEL (+) or (—) button.
à Press the MENU/SELECT button on the
N
\
TES -
Suv Cy
fas CAN
nda aren
Ч
X = J
Roue UN SENTE
Fa qu Bowe Raid
San VS HP
TRES An Ryan
yat aid
Install Tere) NN
Nave
remote control to show the onscreen menu.
SN Press the CURSOR DOWN button repeatedly
until Install is highlighted.
SN Press the CURSOR RIGHT button to enter the
» Install menu. Language will be highlighted.
\ Press the CURSOR DOWN button repeatedly
^^ until Auto Program is selected. “Search ?” will
®
appear.
&& press the CURSOR RIGHT button to start the
Auto Programming process.
" STA I dal
; SE
% A
1% + = Alo Науат Sed?
— Се EN
/ Nave
CN Press the STATUS/EXIT button to remove the -
menu from the screen when the Auto program- ©
ming process has finished.
After you’ve run Auto Program, check out the ® A Hy Sees Weit
results. Press the CHANNEL (+) or (=) button and соо SETE are р
see which channels you can select.
Remember, an antenna or cable TV signal must first
be connected to your TV, see Quick-Use Guide for
making connections. J
CHANNEL EDIT
hannel Edit makes it easy for you to add or delete Mr В
channels from the list of channels stored in the Наше “ines.
's memory. actes Sve
| NA NES
Press the MENU/SELECT button on the remote er re
control to show the onscreen menu.
Press the CURSOR DOWN button repeatedly
until Install is highlighted.
Press the CURSOR RIGHT button to enter the
Install menu. Language will be highlighted.
Press the CURSOR DOWN button repeatedly
N until Channel Edit is selected.
SN press the CURSOR RIGHT button to enter the
Channel Edit mode.
Press the CURSOR UP or CURSOR DOWN
buttons to scroll though the list of available chan-
nels, you can also press the CH+ or CH- to scroll
through the list of channels. Or, press the numbered
buttons to select a specific numbered channel.
PHILIPS
Mru
Roue UN TIRE
FOSTER Qo Bogan
Install eya EN
Nave
Z
НИ,
Je
Wy
%
%
Ei
La
Y
Y "Un
la
Y
#7
Yt be
>
À de Eu,
000 > MF 40
9000 wi
@
A
À
e“
Pa
EP À
Cae
и
1
со
Зи
749
SS With the channel you want to edit selected, press the
CURSOR RIGHT button to activate the “skip-
ping” of the channel. The skipped channel will not
appear when changing channels.
SN Press the STATUS/EXIT button to remove the oo
N N onscreen menu from the screen. == =
Ne PHILIPS
Note: When you want to add a channel that has been a
skipped, repeat steps 1-4. By pressing the CURSOR care! Et 3 Simed >
RIGHT button skipped is deactivated. — ® и
a
7
Uy,
0000
EL
2 1
à ©
How To USE THE INSTALLATION FEATURES
NAME CONTROL (PICK LIST)
he channel NAME feature allows you to list
the “call” letters of your favorite stations
beside their channel numbers when they appear
on the screen. The TV has in memory a list of the
50 most popular channel names (for example:
ABC, CBS, FOX, NBC, etc.). You can also enter
a custom name (up to five characters) see next
page for details.
Tune to the specific channel you want to name, then
follow the steps below.
>. Press the MENU/SELECT button on the
\ remote control to show the onscreen menu.
Press the CURSOR DOWN button repeatedly
until Install is highlighted.
\ Press the CURSOR RIGHT button to enter
N the Install menu. Language will be highlighted.
Press the CURSOR DOWN button repeatedly
until Name is selected.
Press the CURSOR RIGHT button to move
N to enter the Name menu.
With Pick List highlighted, press the CURSOR
RIGHT button to enter the “Pick List” selec-
tions.
Q Press the CURSOR UP or CURSOR DOWN
Ÿ buttons to scroll through a list of options.
After you have selected a name for the channel,
press the CURSOR RIGHT button to save
the name in the TV’s memory, it will appear in
the upper left hand corner of the screen.
Press the STATUS/EXIT button to remove the
SN menu from the screen.
The five characters that the channel NAME feature
allows you to input can be letters, a dash (-), or the
numbers 0 to 9.
The Channel Label or Name will appear when a
channel change 1s made or when the STATUS/EXIT
button 1s pressed.
Adure NN
ahhh
a o
Na ae NA
Nu N a
ENE NNT TE eae
Ana WN ot
ВС у
3 + men N ANTES
NENE SEL RR
Ney eva
DRESS RIA
"a
ee
“el
“= Te 7
Bite, ВО Об Fe
“le mph Y
NY ё © 2
A
CD
=
ей
PIC SEE
PHILIPS
\ |
Mu
House
NA
NENA
Says
TASTE
Insal
Ак
e
I
E
E м
a
—
27
"Y
»
пои
7
A
“У опллий
0, cet
2
Y
Es
7
7
e
A
и
FE
7%
7
7
Lo]
why?
Edo
7
5%,
E
ао
4 Y
7
2
a
Зе
2
A
ой
и
re 6
2
Install
Name
АС
Install
Name 8
Ack Lid AC »
Cros 8
How TO USE THE INSTALLATION FEATURES
NAME CONTROL (PERSONAL)
he channel NAME feature allows you to list Meru
the “call” letters of your favorite stations Наше
beside their channel numbers when they appear ae
Saved sew ve:
on the screen. You can enter a custom name (up bu een
. № SRN
to five characters) for each channel. ty Em Rete tua
Tune to the specific channel you want to name, then Radia Ag Rogan
follow the steps below. Insal SINN
hiver
SENS
=
à Press the MENU/SELECT button on the
\ remote control to show the onscreen menu.
N
SN Press the CURSOR DOWN button repeatedly hk
= . . . .
& until Install is highlighted.
So SE Language Engisn
ave VS
SN Hop Ah
N Press the CURSOR RIGHT button to enter No Hoya
S . . . ESS pre Xx
y the Install menu. Language will be highlighted. UNT SUN
®& SHE 5 Na
Press the CURSOR DOWN button repeatedly
N
se until Name is selected.
NN press the CURSOR RIGHT button to move
N to enter the Name menu.
SN Press the CURSOR DOWN button to select
Personal.
NN
One №
NY Press the CURSOR RIGHT button again;
Za
then press the CURSOR UP or CURSOR
DOWN buttons to scroll through a list of
Ulla
options for the first character (A through Z, O © (0) ©
through 9). Press the CURSOR RIGHT but- ls OS @ AC
ton, and repeat for the second, third, fourth, and (7) @ @) 6
fifth characters. ООО
Q Press the STATUS/EXIT button to remove the Ш -
Co menu from the screen. PHILIPS
| ) Install
| a
= D
©
The five characters that the channel NAME feature
allows you to input can be letters, a dash (-), or the
numbers 0 to 9.
The Channel Label or Name will appear when a
channel change is made or when the STATUS/EXIT
button is pressed.
How To USE THE PICTURE ADJUSTMENT CONTROLS
1 adjust your TV picture controls, select a channel and
follow these steps.
$ Mau
o
«À Press the MENU/SELECT button on the remote en -
\ Adue Noves
N control to show the onscreen menu. ul > Ny
$ N Press the CURSOR UP or CURSOR DOWN but- $ q » 40
=>
s ton to highlight PICTURE. ENS
4
4
4
{ee em
RARO RIN 4
4
,
И
Press the CURSOR RIGHT button to enter the
e Picture menu.
ДА
#4
|,
ZU
Press the CURSOR UP or CURSOR DOWN
button to select the picture adjustment you want to
change: Brightness, Color, Contrast, Sharpness,
Color Temp., Tint, Dyn. Contrast, or Color Enh.
NOTE: The menu will show only five items at a time, so
you will need to continue scrolling with the CURSOR
DOWN button to adjust the Tint, Dyn. Contrast, or Color
Enh.
Fi
Un,
= Press the CURSOR LEFT or CURSOR RIGHT
SN button to adjust the selected control. OR, 1f Color
Temp. or Dyn. Contrast is chosen, press the CUR-
SOR UP or CURSOR DOWN to select the pre-
ferred mode. If Color Enh. 1s selected press the
CURSOR RIGHT button repeatedly to toggle the
various modes.
SN Press the STATUS/EXIT button when finished to
Ne
UN remove the menu from the screen.
NS
NOTE: The Tint Controls will not be available for
adjustments when tuned to the AV1/AV2/AV3 PHILIPS
Inputs.
Brightness — adds or subtracts light from the darkest \ | |
part of the picture.
Color — adds or eliminates color.
Contrast — improves the detail of the lightest parts of
the picture.
Sharpness — improves the detail in the picture.
Color Temp. offers NORMAL, COOL, or WARM
picture preferences. (Normal will keep the whites,
white; Cool will make the whites, bluish; and Warm
will make the whites, reddish.)
Tint — adjusts the picture to obtain natural skin tones.
Dyn(amic) Contrast — helps to “sharpen” the picture
quality by making the dark portions of the picture
darker and the light portions more noticeable. You can
select from the various modes: Off, Min, Med, and
Max.
Color Enh(ancement) — increases the intensity of the
color when “On” is selected.
How TO USE THE SOUND ADJUSTMENT CONTROLS
1 adjust your TV sound controls, select a channel and
follow these steps.
^^ Press the MENU/SELECT button on the remote
\ control to show the onscreen menu.
RS
уе “©
anno; aaa
ENTES
3 a
MN Press the CURSOR UP or CURSOR DOWN but-
ton to highlight Sound.
>. Press the CURSOR RIGHT button to enter the
N Picture menu.
N Press the CURSOR UP or CURSOR DOWN
SN
NS button to select the sound adjustment you want to
` change: Treble, Bass, Balance, AVL, Dynamic
Bass, Incr. Surround, Stereo, SAP, Audio Out, and
Speaker. NOTE: The menu will show only five
items at a time, so you will need to continue scroll-
ing with the CURSOR DOWN button to adjust the
Incr. Surround, Stereo, SAP, Audio Out, or Speaker.
Tree a
Ya. Shy
ESA
AN
nie ENS
NN Press the CURSOR LEFT or CURSOR RIGHT
button to adjust the selected control. Or, if Incr.
Surround is chosen, press the CURSOR UP or
CURSOR DOWN to select the preferred mode. If
AVL, Stereo, SAP, Audio Out, or Speaker is select-
ed press the CURSOR RIGHT button repeatedly to
toggle the various modes.
wt)
7
UN Press the STATUS/EXIT button when finished to
e remove the menu from the screen.
“li
Uf
Treble — enhances the high frequency sounds.
Bass — enhances the low frequency sounds.
PHILIPS | SP $4 EA Ne |
Balance — adjusts the level of sound coming from the св
left and right speakers.
AVL (Auto Volume Leveler) - when On, AVL will — | Ado Qt «fs Fed rides |
level out the sound being heard when sudden changes CR
in volume occur during commercial breaks or channel
changes. | Poder + A Do |
Dynamic Bass - enhances the low frequency sounds.
Incr. Surround - adds greater depth and dimension to
TV sound. Select from Incr. Surrourd, Dolby Virtual or
Stereo sound (if Stereo) or Dolby Virtual, Spatial or
Mono (if Mono).
SAP (Secondary Audio Programming) sent as a
third audio channel, a SAP signal can be heard apart
from the current TV program sound. Note: If SAP is
not available, “Not Available” will appear on the
screen.
Audio Out — select from Variable or Fixed. When
Variable is selected, change the volume at the TV using
the TV’s remote control. If fixed is selected, change
the volume at the external device’s audio controls.
Speaker -turn the TV speaker On or Off. When a Hi-
Fi system is used, turn the TV speaker Off to hear the
sound from the Hi-fi system instead of the TV's speak-
ers. When no external audio system is connected, On
must be selected to hear sound coming from the TV.
10
Z
wm
и
И
»,
Za
7
MA
How To UsE THE TIMER MENU CONTROLS
our television comes with an onscreen clock. The
TV can also be set to turn on or off at a specific
time and tune to a specific channel when it powers
itself on.
Press the CLOCK button on the remote con-
trol to display the Timer onscreen menu.
Press the CURSOR UP or CURSOR DOWN
button to highlight one of the Timer controls.
These controls are Time, Start Time, Stop Time,
Program No., Activate, Display, and AutoChron.
Press the CURSOR RIGHT button to display
the menu for the selected item.
Make adjustments to the selected items by fol-
lowing the steps below.
Time: Enter the current time using the
Numbered buttons. Use the CURSOR UP and
CURSOR DOWN buttons to toggle the AM and
PM setting.
Start Time: Use the numbered buttons to enter
the time you want the TV to turn itself On. Use
the CURSOR UP and CURSOR DOWN but-
tons to toggle the AM and PM setting.
Stop Time: Use the numbered buttons to enter
the time you want the TV to turn itself Off. Use
the CURSOR UP and CURSOR DOWN but-
tons to toggle the AM and PM setting.
Program No.: Use the NUMBERED buttons or
the CH + or CH- buttons to enter the desired
start-up channel. You can also press the CUR-
SOR RIGHT or CURSOR LEFT buttons to
enter the desired start-up channel.
Activate: Set the timer to turn itself On (Once
or Daily) or Off. Press the CURSOR UP or
CURSOR DOWN buttons to select Once, Daily,
or Off.
Display: Press the CURSOR RIGHT or CUR-
SOR LEFT to toggle between On or Off. If On
is selected, the time will be displayed all the
time when the TV is on. When Off is selected,
the time will only appear when the
STATUS/EXIT button 1s pressed.
AutoChron: For use of the AutoChron feature,
refer to the section on “How to Use the
AutoChron Control” see next page.
Press the STATUS/EXIT button to remove the
menu from the screen.
Mau
Features
№ an ao
Ao lak
SRN ых
AED Han
Sa ST Ka
Gu Quen
RAS TE
TARADO
SN
SN
ES
Sa
a
css
N
PHILIPS
\ y
11
Trrer
Tne ——:—— M
NT
al
me e --:--Al
=
а
Yat Ire <= — — - :- - АМ»
=
а
Ip Tre « — — :- — АМ
Adhete «$ Cl
Aide o§ Of
i
Oy <+ OF в
СВ
мо & tt
Dar
Game
Refer to the next page for
details about how to use
the AutoChron control.
&
NN
Z Y
a |
“7
A
VW
%
_
gr
7
НЕ 7
“
д!
NN
La
“7
RS
N
AAN
Uli
№
WS
wh
2
FN
S
y
Ww
Z
НТ
7
ПИ
7
ПИ
How TO USE THE TIMER MENU CONTROLS (CONT’D)
AUTO CHRON
Ae hron™ can automatically set the TV's onscreen
clock. Since the time is received from a broadcast
signal, you must be sure that a cable TV or Antenna
signal is present before you use the AutoChron™ fea-
Press the CLOCK button on the remote control
to display the Timer onscreen menu.
Press the CURSOR DOWN button until
AutoChron is selected.
Press the CURSOR RIGHT button to display
the AutoChron menu. Mode will be highlighted.
Press the CURSOR RIGHT button to display
toggle between Manual and Auto.
Press the CURSOR DOWN button to select
Time Zone.
Press the CURSOR RIGHT button to enter the
Time Zone menu.
Press the CURSOR UP or CURSOR DOWN
buttons to select the correct Time Zone. To
activate the Time Zone, press the CURSOR
LEFT button.
Press the CURSOR DOWN button to select
DST (Daylight Savings Time).
If your time zone uses Daylight Savings Time,
press the CURSOR RIGHT or CURSOR
LEFT button to toggle between Off or On, and
select On.
Press the CURSOR DOWN to select Channel.
Then use the NUMBERED buttons to enter
your local PBS channel or any local channel
that transmits the current time. You can also use
the CURSOR RIGHT or CURSOR LEFT but-
tons to change channels one at a time. If TIME
FOUND appears,the process is finished. If not,
follow the onscreen instructions, and try another
channel.
Press the STATUS/EXIT button when finished to
remove the onscreen menu from the TV screen.
NOTE: If the AutoChron™ control is unable to find
the time being transmitted on any channels, you may
have to enter the time manually. Refer to the previous
page for details.
12
D № A S +
(©) Mo nay Wan
Mea
ро wn
Сети)
| er } [ Select) Ñ
=N Tirer
№ AutoChron
1 Ato Hvis
SE 0 »
sv Tre ae
E UN
Sey Surg
Ns
SN
e oy
EN
SEN
\! NS Tirer
- AtoGron
>.
= Lu ©
3 S NENE
Tire dre Elartic
FN gd
N= =~ {ere
NES
SES
\ &&
Timer
AutoChron
wet Fo
re Tire be Alantic B
IW 8
PHILIPS
Timer
AutoChron
a № >»
Chad
Timer
AutoChron
NE
№ Ве
N
2 DB
Hesse Wait
Timer Timer
Atolhon AutoChron
Card 4 ® Card 2 B
TIVE NOT FOUND TINE FUND
FE-ENTER CHINNEL
UNDERSTANDING THE AUTOLOCK™ (CONTROLS
he AutoLock™ feature receives and
processes data sent by broadcasters or
other program providers that contain pro-
gram content advisories. When programmed
by the viewer, a TV with AutoLock™ can
respond to the content advisories and block
program content that may be found objection-
able (such as offensive language, violence,
sexual situations, etc.). This is a great feature
to censor the type of programming children
may watch.
In the AutoLock™ section, you'll learn how
to block channels and programming that is
not rated, is unrated, or has no rating. You
will also find out how to turn these blocking
features ON or OFF. Following are brief
explanations of some terms and ratings relat-
ed to the AutoLockTM feature.
AutoLockTM offers various Blocking
Options from which to choose:
BLOCKING: The BLOCKING control is
what can be thought of as the “master switch”
for AutoLockTM. This control affects the set-
tings you have chosen for blocking programs
according to movie ratings or TV ratings, or
for blocking programs that have no rating or
are unrated. When the BLOCKING control is
OFF, the blocking or censoring of programs is
disabled. When the BLOCKING control is
ON, blocking will occur according to the set-
tings you have chosen.
NO RATING: ALL programming with no
content advisory data can be blocked if NO
RATING is set to ON.
Programming that has No Rating is not
encoded with any rating information from the
MPAA or the Parental Guidelines. Any pro-
gramming could fall into this category.
You also can block individual channels or
block programming based on ratings of the
MPAA and TV broadcasters. (See a descrip-
tion of the ratings on this page.)
MOVIE RATINGS
(MOTION PICTURE ASSOCIATION OF AMERICA)
G: General Audience - All ages admitted.
Most parents would find this programming
suitable for all ages. This type of program-
ming contains little or no violence, no
strong language, and little or no sexual dia-
logue or sexual situations.
PG: Parental Guidance Suggested - This
programming contains material that parents
may find unsuitable for younger children. It
may contain one or more of the following:
Moderate violence, some sexual situations,
infrequent coarse language, or some sugges-
tive dialogue.
PG-13: Parents Strongly Cautioned - This
programming contains material that parents
may find unsuitable for children under the
age of 13, It contains one or more of the fol-
lowing: violence, sexual situations, coarse
language, or suggestive dialogue,
R: Restricted -This programming is specifi-
cally designed for adults. Anyone under the
age of 17 should view this programming
only with an accompanying parent or adult
guardian, It contains one or more of the fol-
lowing: intense violence; intense sexual situ-
ations; strong, coarse language; or intensely
suggestive dialogue,
NC-17: No one under the age of 17 will be
admitted. - This type of programming should
be viewed by adults only. It contains graphic
violence; explicit sex; or crude, indecent lan-
guage,
X: Adults Only - This type of programming
contains one or more of the following: very
graphic violence, very graphic and explicit or
indecent sexual acts, very coarse and intense-
ly suggestive language.
13
TV PARENTAL GUIDELINES
(TV BROADCASTERS)
и УД 7V-Y: (All children -- This program is
Y designed to be appropriate for all chil-
dren.) Designed for a very young audi-
ence, including children ages 2-6. This type of
programming is not expected to frighten
younger children.
EAYA TV-Y7. (Directed to Older Children --
Y 7 This program is designed for children
ages 7 and above.) It may be more
appropriate for children who have acquired the
development skills needed to distinguish
between make-believe and reality. This pro-
gramming may include mild fantasy and comic
violence (FV).
MAYA 7V-G: (General Audience -- Most par-
ents would find this program suitable for
all ages.) This type of programming
contains little or no violence, no strong lan-
guage, and little or no sexual dialogue or sexual
situations.
182 /V-PG: (Parental Guidance
Р © Suggested -- This program contains
material that parents may find unsuit-
able for younger children.) This type of pro-
gramming contains one or more of the follow-
ing: Moderate violence (V), some sexual situa-
tions (3), infrequent coarse language (1), or
some suggestive dialogue (D).
EAYA TV-14. (Parents Strongly Cautioned -
I 4 - This program contains some material
that many parents would find unsuitable
for children under 14 years of age.) This type
of programming contains one or more of the
following: intense violence (V); intense sexual
situations (S); strong, coarse language (L.); or
intensely suggestive dialogue (D).
a YA TV-MA: (Mature Audience Only —-
M А This program is specifically designed to
be viewed by adults and therefore may
be unsuitable for children under 17.) This type
of programming contains one or more of the
following: graphic violence (V); explicit sexual
situations (S); or crude, indecent language (L.).
Ao allows parents to block out or
“censor” any channels they think children
should not watch. A channel blocked by the
AutoLock™ control cannot be viewed until a cor-
rect access code is used to unlock the channel
for viewing. First, let's set your AutoLock access Nuus
code. бане
N the remote control to show the onscreen
menu.
SN Press the CURSOR UP or CURSOR
DOWN button to highlight Features.
Press the CURSOR RIGHT button to
display the Features menu.
SN Press the CURSOR DOWN button to
Sx highlight the AutoLock control.
Ny Press the CURSOR RIGHT button to
N enter the AutoLock mode. “Access Code
S will appear.
SN Using the numbered buttons on the
O remote control, enter the access code. If
you do not know your code, 0,7,1,1 1s the
default code. After you have entered the
code once, Incorrect will appear on the
> Press the MENU/SELECT button on
N
SETTING UP AN AUTOLOCKTM ACCESS CODE
Features
bla Cds
NES es
Access Ode
a
ай
Neo San
Se USE WRX x
a aa,
Cos Quien
-
e
NW NRT
Rah Shing
Natu
Ares Care
XXXX
Incorred
Ds
E
7
8
ут
и
screen. Enter the code a second time,
Correct will appear. When “Correct”
appears, the AutoLock menu is accessible
and you can proceed to change the access
code.
= Press the CURSOR DOWN button to
N 1 1 SN
№ highlight Change Code. S
CN Press the CURSOR RIGHT button to N
o enter the Change Code menu, “Enter
af New Code — will appear. Enter a new
four-digit code using the number but-
tons, “Confirm Code----" will appear on
the screen.
SN Using the numbered buttons, re-enter
ve your new four-digit code, “Confirm
“Code” will appear. After re-entering
your new code,” Correct” will flash on
the screen briefly and the highlight bar
goes back to AutoLock.
=\ $ Y Press the STATUS/EXIT button to
\ \ remove the menu from the screen.
NA
NOTE TO PARENTS: It isn’t possible for
your child to unblock a channel without know-
ing your access code or changing it to a new
one. If your code has been changed without
your knowledge, then you will become aware
that blocked channels may have been viewed.
GA
Gé
Remember that 0711 is the default
AutoLock™ code. If your access code has
been changed by someone other than you (a
child, for example) or you have forgotten the
code, you can always get in by inputting the
default code.
PIC SIZE
PHILIPS
Cc
or
A
%
ия
ZZ
e
Z
LE
E
XXXX
Qrredt
A
HE,
ee,
ус
EA
Hier
Naw Code
AMOR кл СЕ
New Gx
XXXX
How TO LOCK CHANNELS USING AUTOLOCK™
A fter your personal access code has been
set (see the previous page), you are ready
to select the channels or inputs you want to
block out or censor.
a
WH
%,
Za
NN
№
<
ANOS
NN
a
и
N
+
№
$
N
ZZ
Nu
Sa
SN
\
UN
NN
>
%
“itm,
%,
7
И
Y
Е
“NI
й
Press the MENU/SELECT button on
the remote control to show the
onscreen menu.
Press the CURSOR UP or CURSOR
DOWN button to highlight Features.
Press the CURSOR RIGHT button
to display the Features menu.
Press the CURSOR DOWN button
to highlight the AutoLockTM control.
Press the CURSOR RIGHT button
again display the AutoLock menu.
Enter your four-digit ACCESS
CODE. Correct will flash very briefly
and the AutoLockTM will be accessible.
Press the CURSOR RIGHT to enter
the Lock Channel menu.
Using the numbered buttons or the
CH+ or CH- buttons enter the chan-
nel you wish to lock. You can also use
the CURSOR UP or CURSOR DOWN
buttons to scroll to the channel you
wish to block.
Press the CURSOR RIGHT buttons
to activate the locking of a channel.
A padlock image appears to the right
of the channel number.
Repeat steps 8 and 9 for any channels you
want to lock.
a
2
ПО
Jr
7
>»
NY Press the STATUS/EXIT button to
S
| $ remove the menu from the screen.
NN
NOTE TO PARENTS: It isn’t possible for
your child to unblock a channel without know-
ing your access code or changing it to a new
one. If your code has been changed without
your knowledge, then you will become aware
that blocked channels may have been viewed.
Remember that 0711 is the default
AutoLock™ code. If your access code has
been changed by someone other than you (a
child, for example) or you have forgotten the
code, you can always get in by inputting the
default code.
ve
| SEA. M
Meru
Features
“Tay
NA
SRE ds das ,
ме о АА
М CATENTS
nan ad in Hire
SEE LINA!
Ptas ah,
MIA
Aes Ge
Access Core
XXXX
Grred
TREE eme
Ne Nun
had and koa,
№№
= Dinan an
Sy У
<Ë
SN
У
No
ot
%
2
и
Y
ni
AN
Z
=
ПН,
pa
npr
Gerd
e,
ив
ДР
Ci
He Ld EE
Ne
y
PIC SIZE MAIN
FRI
PHILIPS
e Camas
ELOCED EY AJCLOK
CHANNEL ELCOANG
Ares Ode
If your access code is entered on a blocked channel, the current channel
along with all other blocked channels will become unblocked until the TV
is powered off. Blocked channels will not appear when the Channel + or —
buttons are pressed.
15
arious onscreen messages will appear
when someone tries to view blocked pro-
gramming. The message is determined by how
the current programming is blocked. You may
view the blocked programming and turn OFF
the AutoLock™ feature by using the Clear All
control or by entering your access code.
Press the MENU/SELECT button on
the remote control to show the
onscreen menu.
Z
ТИ,
Hs
a
Press the CURSOR UP or CURSOR
DOWN button to highlight Features.
AN
La
oS
NN
dy
SN Press the CURSOR RIGHT button
= to display the Features menu.
SU Press the CURSOR DOWN button to
^^ select the AutoLockTM control.
N
NN Press the CURSOR RIGHT button
© again to highlight ACCESS CODE.
SS Enter your four-digit Access Code,
N “Correct” will briefly appear on the
screen and the AutoLock menu will be
accessible.
wp
р,
GE
Vi Press the CURSOR RIGHT button
to enter the AutoLock menu.
Uli,
SN Press the CURSOR DOWN button to
o select Clear All. Clear? will appear on
the screen.
7
%
у
SN Press the CURSOR RIGHT button
SN
> to activate the clearing of all channels.
Z
НВ
If you tune to a specific channel that has
been blocked by BLOCK CHANNEL or
any of the AutoLock™ RATING options,
simply enter your four-digit access code to
view the channel.
NOTE: This will unblock ALL channels
until the TV is shut OFF. When powered
back ON, all previously blocked channels
will be blocked again.
Manu
teta
How To CLEAR ALL LOCKED CHANNELS AT THE SAME TIME
emy
NEC
DEL ada ana
A o,
VRP Si
Premi Porres
Con un
Fr
ANNE PRES
NANO
Power
VCR DVD SAT AMPACC Ne
su
; À À | N
" us
нь В
N TRE
8 ste,
8 NN
Sd —
»
E —
SN
- pe -
wl v.
® \ &
С° Quadrasurt™ ——
се!
FREEZE
PHILIPS
\ )
16
Manu
Features
Tere
ENE
XXXX
WEN AL FR
Na NATA
Mane? Sheds
Qo (Nn
r .
Una
Lo
%
Tonle Sane
D san à»
agp €
>
7
7
“>
rr
y
2
7 af
Kt
ий ууу
fo J
PEDAL
lr cares
LON CNS
те {ND
=
] Aer
Sais bare
NONE MRR
TU NT
NN PIN
po
BLOCKING PROGRAMS BASED ON MOVIE RATINGS
fter your personal access code has been
set, you can select specific movie ratings
that you want to censor.
the remote control to show the
onscreen menu.
À Press the MENU/SELECT button on
\
N
№
$
Press the CURSOR UP or CURSOR
DOWN button to highlight Features.
7
N Press the CURSOR RIGHT button
Na to display the Features menu.
%
a Press the CURSOR DOWN button to
= highlight the AutoLockTM control.
Ce Press the CURSOR RIGHT button
‚ № again to highlight Access Code.
Enter your four-digit Access Code.
Correct will flash very briefly and the
menu will move to the left with the
AutoLock menu now accessible.
NY Press the CURSOR RIGHT button
to display the AutoLock menu.
%
yy,
Za
Press the CURSOR DOWN repeated-
ly until Movie Rating is highlighted.
“Y
№
SY Press the CURSOR RIGHT button
№ | .
y and the Rating menu shifts to the left
with G highlighted.
ZA
wh
4
7
N Press the CURSOR UP or DOWN
\ buttons to highlight each rating you
want.
Z
НИЙ,
Y
Press the CURSOR RIGHT button
to turn the rating ON or OFF. Turning
the rating ON will block programs with
that rating from being seen.
%
%
НН
SY Press the STATUS/EXIT button to
Ds remove the menu from the screen.
%
When a rating is turned ON, all higher ratings
also will be turned on automatically. For
example, if the R rating is turned on, the NC-
17 and X ratings also will be turned on.
All Movie Ratings can be turned ON or OFF.
Refer to page 13 for Movie Rating defini-
tions.
Quadrasurf -
® ®
(Ce) (00 (=) ©
PHILIPS
Axcess Ge
XXX
Coarred
O00
MAIN
FREEZE
Z
>
2
cr
[52
made HTS
rw JE,
no
a”.
A
NY
DRX
Of Hh»
"A
vs
BLOCKING PROGRAMS BASED ON TV RATINGS
) Jou can select specific TV ratings that you
want to censor by following these steps.
à Press the MENU/SELECT button on
\ the remote control to show the
onscreen menu.
Ми
NN
SN Press the CURSOR UP or CURSOR al
- Ato Lok PLZ
Wes Ses
DOWN button to highlight Features.
Soa din
LATELY LARA
Pata
MA
MAAN
Press the CURSOR RIGHT button
e. to display the Features menu.
Press the CURSOR DOWN button to
a highlight the AutoLock™ control.
A
МУ
New
Fy
& Press the CURSOR RIGHT button a Fedires
yy again to highlight Access Code. 5 Alo Y Rocess Gc
Un Enter your four-digit Access Code. e. Grred
uw Correct will flash very briefly and the = Nate
menu will move to the left with the on
AutoLock menu now accessible. $ у
\
SY Press the CURSOR RIGHT button o
\
=
to display the AutoLock menu.
hr
Uli,
O Press the CURSOR DOWN button
A repeatedly until TV Rating is highlight-
ed. < SN
a Press the CURSOR RIGHT button
№ to enter the TV RATING menu. Features
№& Año Lok
OS Press the CURSOR UP or DOWN to Lot Cir! “y
N N : : Chen Cab NV
\ № select a desired rating (TV-Y, TV-Y7, UN NN N ©
TV-G, TV-PG, TV-14, or TV-MA) . Nine ART NES
TV Rating NN
Su
= = Press the CURSOR RIGHT or LEFT
N \ to turn the block on the rating ON or
OFF.
Ado Lock
po : : TV Rating
NOTE: More specific subratings (for violence, Pos fre N
sexual content, dialogue, or fantasy violence) PHILIPS 4 a we
are available for TV-Y7, TV-PG, TV-14, and UNS
DS
TV-MA. (Refer to page 13 for definitions.) sa
SN To access these subratings, with the \ y
N && main rating selected, press the CUR |
№ &&& |
SOR RIGHT. Then, repeat steps 8 ;
and 9 to turn the sub-ratings ON or Ato Lok Ato Lok
OFF. TV Hing TV Ring
We a q» TVMA € | Vo
N NN NW 5
= + Press the STATUS/EXIT button to Xu
Y \ remove the menu from the screen. va >
When a rating is turned ON, all higher ratings
also will be turned on automatically. For
example, if the TV-Y7 rating is turned on, the
TV-14 and TV-X ratings also will be turned on.
18
2 2
ion ПИ
OTHER AUTOLOCK™ BLOCKING OPTIONS
he AutoLock™ control offers the viewer
other blocking options as well/ With
Block Options, the censoring can be turned
On or Off.
Press the MENU/SELECT button on
the remote control to show the
onscreen menu.
$ N Press the CURSOR UP or CURSOR
S DOWN button to highlight Features.
SN Press the CURSOR RIGHT button
N to display the Features menu.
a Press the CURSOR DOWN button to
^^ highlight the AutoLock™ control.
Press the CURSOR RIGHT button
again to highlight Access Code.
« Enter your four-digit Access Code.
UN Correct will flash very briefly and the
Na y
NW menu will move to the left with the
AutoLock menu now accessible.
SV Press the CURSOR RIGHT button
К to display the AutoLock menu.
N
SN Press the CURSOR DOWN button
SN repeatedly until Block Options is high-
№ lighted. © > ©
WX Press the CURSOR RIGHT button
to enter the Block Options menu.
SN Press the CURSOR UP or DOWN
À buttons to select the desired block
№ option.
Blocking: Might be called the “master
switch” for AutoLockTM, When On,
ALL blocking/censoring will take place.
When Off, ALL blocking is disabled.
Block Unrated: ALL unrated programs
based on the Movie Ratings or
Parental (TV) Guidelines can be
blocked if this feature is set to On and
the Blocking feature is set to OFF,
No Rating: ALL programming with
NO content advisory data can be
blocked if set to On and the Blocking
feature 1s set to OFF,
Press the CURSOR RIGHT or
LEFT to toggle BLOCKING ON or
OFF.
%
S\\Press the STATUS/EXIT button to
>
& remove the menu from the screen.
Remember, when the BLOCKING control is
OFF, the blocking or censoring of programs is
disabled. When the BLOCKING control is
ON, blocking will occur according to the set-
tings you have chosen.
a
o
SE
Ñ À
%
=
Zee,
ИО чай
#
к
són
Er
%
WERE
=
ceci
PICTURE
%
=
i?
7
Un
Y
ий
то
Той
но В
ZA
XXXX
E Paz,
4
=
ини #
=
7
“7
AE
PES
z
oi
ия,
e
a
gens
27
%
“e
be
zZ
%
ón
7,
(5+) De
OOOO
PIC SIZE MAIN
FREEZE
PHILIPS
>
“e
Ri
E
PA
=
vd
Ye
e
NTE
Ato Lok
Nada К М
ca ete
Crea (NET
* Aa
RSS de
Ram
_
19
Features
Auto Lock
Blok Qtians
ren
NON
\
E
EN
TN
#4
®
E
Zr
о
A
USING THE AUTOLOCK™ REVIEW SCREEN
T° remind you wich rating you have locked
and which Block Options you have selected,
. . | . Mae Rating - N Ring -
a review screen is available to review your v7
AutoLock™ settings. To access this screen follow -
the steps below. - Das
R TAG
Press the STATUS/EXIT button on the NG17 TV14
remote control TWICE. Your
AutoLock™ settings will appear on the
screen.
Z
НТ
NOTE: If you have blocked specific subratings,
such as V for violence in the TV-PG category,
these blocked subratings will not appear in the
review. The subratings however are still blocked
according to your selections.
SN After a few seconds, the settings will
S
NW leave the screen automatically, or you can
Ses press the STATUS/EXIT button a third
time to remove them from the screen.
=
vin,
“e
%, e
2
2
The AutoLock™ status screen will only
appear if the Block option is set to On. See
previous page for details.
AutoLock is set to Off by default.
PIC SIZE MAIN
FRI
PHILIPS
\ y
This display will appear after Step One This display will appear after Step One
(above) is completed if the AutoLockTM (above) is completed if the AutoLock™
Block Option is set to On. Block Option is set to Off.
Mie Rating - Wire - Atolok DSELED
- TVY7
- TVG
R TVRC
NG17 TV-14|
X MA
Bod Urated CH
No Rating Cf
20
How To USE THE WIDE SCREEN FORMAT CONTROLS
ou can change the screen format size to
match the type of program you re watch-
ing. Select the normal 4:3, Zoom 14:9, and
Subtitle aspect ratios. There also is 16:9,
Superwide, and Wide Screen aspect ratios,
which allows movies to be viewed in their full
width (known as letter-box style).
Press the MENU/SELECT button on
the remote control to show the on-
screen menu.
7
SN Press the CURSOR UP or CURSOR
&
Sw DOWN twice to highlight Features.
<N Press the CURSOR RIGHT and the
№ menu will shift to the left.
ni)
Press the CURSOR DOWN repeated-
ly until the Wide Screen control is
highlighted.
2
7
Di
"Press the CURSOR RIGHT button
\
QD to enter the Wide Screen menu.
SS Press the CURSOR UP or CURSOR
DOWN repeatedly to toggle among the
screen format sizes — 4:3, Zoom 14:9,
Zoom 16:9, Subtitle Zoom, Superwide,
Wide Screen, or Auto.
7
wl)
Y
SSS Press the STATUS/EXIT button to
remove the menu from the screen.
”
Ult,
OR
You can toggle the screen format by
repeatedly pressing the PIC SIZE
button on the remote control.
HU
=
Ду
The FORMAT control is not available for
use with the AV 4 Inputs (AV4 Channel) if
10801 signal is detected.
8 kr
House fave
a % Y
Dunn Nao E
Features Vip res
Euh ii ny Fe
Ir Cox (O
ia,
EN
5
Gr
A
EEE
À HE, E, E
et =
7
“=
IMPORTANT NOTE:
Some DVD Discs are encoded with as much
as 30% more video information to give the
viewer the best possible picture quality. With
the DVD Player in the 16:9 picture format,
the playback of this type of disc (containing
extra video information), can produce a num-
ber of small white lines in the upper portion
of the black letterbox area. With some of
these discs, this situation is unavoidable and
it does not require a service call.
ONE
7) (+0) (т) ба)
—— 2000
e FIC SEE Ha
OS
PHILIPS
\ )
4:3
pr
RE
_ Wide Sreen 4:3
Qe! UNEN
Ration
Meru
Features
ny
{fo lak
Wide Sre 4:3 D
(ay! Quen 8
R
Wes on e — Zonid:9 ® |
R
So Sen E Zumi6:0 5 |
R
Wee quen H Site Remo |
R
We Sen $ vi >» |
R
Wie Sram $ — Wee que > |
R
Web San Mee |
Subtitle Zoom
Superwide
Zoom 16:9
21
Wide Screen
losed Captioning (CC) allows you to
read the voice content of television pro-
grams on the TV screen. Designed to help the
hearing impaired, this feature uses onscreen
“text boxes” to show dialogue and conversa-
tions while the TV program is in progress.
the remote control to show the on-
screen menu.
À Press the MENU/SELECT button on
\
N
SN Press the CURSOR UP or CURSOR
DOWN twice to highlight Features.
SN Press the CURSOR RIGHT button,
e the menu will shift to the left.
Press the CURSOR DOWN repeated-
SN
Sh ly until the Closed Caption control is
© highlighted.
NN |
E Press the CURSOR RIGHT again.
Nu The menu will shift to the left and
Caption Mode will be highlighted.
SN Press the CURSOR RIGHT to high-
‘a … ,
a light Caption Modes.
“Press the CURSOR UP or DOWN to
select a Caption Mode: CC1, CC2,
CC3, CC4, TEXT1, TEXT2, TEXT3,
or TEXT4. CC Display turns text OFF
or ON if the TV station broadcasting
on the channel is making Closed
Captioning available. With CC Display
highlighted, press the CURSOR
RIGHT to toggle Closed Captioning
ON, OFF, or CC Mute.
NOTE: You also can press the CC button on
the remote control to turn the CC Text option
On or Off.
7
и
7
Ult
SN Press the STATUS/EXIT button to
> remove the menu from the screen.
“>
NOTE: When Closed Captioning is turned
On, the screen will automatically change to
the Wide screen format to allow text to fit on
screen.
=
PAI)
Meru
ФЕ e .
Cura SITES
a mad À Fan te
“
wi
7,
UL
Te
au
Торой Z
ts
pe Eee
40%
— ч
ий Hoi,
Cn
PHILIPS
\ y
CAPTION Mode
Example Display
NOTE: Not all TV programs and product
commercials are broadcast with Closed
Captioning (CC). Nor are all Closed
Captioning MODEs (CAPTION 1-4 or
TEXT 1-4) necessarily being used by broad-
cast stations during the transmission of a pro-
gram offering Closed Captioning. Refer to
your area’s TV program listings for the sta-
tions and times of shows being broadcast
with Closed Captioning.
TEXT Mode Example Display -
The TV screen will be
blocked from viewing.
22
How TO USE THE CLOSED CAPTION CONTROLS
Meru
Features
Ea rate
Was Se МУК
a
NEN) SON
Ka en
MAREN
jon Node
E amenas
М
ds
rs
1%
a
Quien Mx Eb
a
Open Mich «5
св
Ain Me D:
aR
Ву №3 во
rm
tee
Le
Рем Bib
Quien Nte
Display
a
оу >
a
Оу © СМ
How TO USE THE ROTATION CONTROLS
Г rare cases the video supplied to the TV
screen might show slightly tilted one way or
another. The Tilt Adjust control will allow you Sa Ш
. . MOL МУ
fo correct the problem by adjusting the screen Quel A fo la
; recti Features Ne Nun
in a clockwise or counterclockwise direction. ve с ОА
Ration Tire
№ ЧЕ 3 ` Se 2
^ Press the MENU/SELECT button on Malos Sat Îre
WN Sven №№ №№
\ the remote control to show the on- pass Qt EN
screen menu. Ne ENS
S
К x Press the CURSOR UP or CURSOR
$ un
S__ DOWN twice to highlight Features.
ww 8115 ,
SR
>. Press the CURSOR RIGHT and the Fedures $
Eo . . ETA
OD menu will shift to the left. ny |
; Er
NN ‚ YNE NT: 1
a Press the CURSOR DOWN repeated- 3 CSS NN €
$ . . ua im N
Sa ly until the ROTATION control is Shaw ion €; 5
highlighted 3
, . E
SN N ad
SN SF x \ "
Se Press the CURSOR RIGHT or UN A
UN LEFT to rotate the picture on th \№ 7)
+ o rotate the picture on the
Is Hep .
screen clockwise or counter clockwise. tres
. ENS
Please note that the amount of rotation Ao Lx
Wied Dooney
; ni SN № SE
will be very minimal. NN chal Quien
Ns Ration
o Press the STATUS/EXIT button to
a remove the menu from the screen.
"
PHILIPS
\ y
Picture tilted to the left
After adjustment
Tr Dynamic Noise Reduction feature can
help eliminate slightly “speckled” pic-
tures (an indication of signal noise in the pic-
ture).
^^ Press the MENU/SELECT button on
\ the remote control to show the
N
onscreen menu.
SN Press the CURSOR UP or CURSOR
DOWN twice to highlight Features.
SN Press the CURSOR RIGHT button
N to display the Features menu.
SU Press the CURSOR DOWN button
SS repeatedly until the Dynamic NR con-
trol is highlighted.
NX Press the CURSOR RIGHT button
№& to enter the Dynamic NR menu.
NN Press the CURSOR UP or CURSOR
DOWN button repeatedly to select the
desired Dynamic NR mode (Off, Min,
Med, or Max).
7
|
SY Press the STATUS/EXIT button to
remove the menu from the screen.
%
Uli
=
7
% ud
vig
>
A A | | É ® 3,9 |
йо ик 7 E
и,
ИР, Ten
Gok © de
Pipe №
fo
| ta
4 E
79000 @
@
En
@
\ y
e Permanent Osd control will store the
TV's channel number in the upper left
corner of the TV while the TV is on. Follow
the steps to turn the feature On or Off.
À Press the MENU/SELECT button on
\ the remote control to show the
onscreen menu.
SN Press the CURSOR UP or CURSOR
DOWN button repeatedly to highlight
Features.
Press the CURSOR RIGHT button
x to display the Features menu.
SU Press the CURSOR DOWN button
SS repeatedly until the Permanent Osd
control is highlighted.
^^ Press the CURSOR RIGHT button
to enter the Permanent Osd menu and
toggle the On or Off selection.
SN Press the STATUS/EXIT button to
remove the menu from the screen.
24
PEN
УВЫ
CD
= k=)
av
PHILIPS
rte rem
Rasta fo
Mru
Features
Dyrarric MR
Parrenent Qi th Fs
\ y
Setting the Permanent OSD control to
ON, will display the current channel
number in the upper left of the screen.
How TO USE THE QUADRASURF CONTROLS
A “list” or series of previously viewed
channels can be selected with the
QuadraSurf™ (colored) buttons on your
remote control. With this feature you can easi-
ly switch between different TV programs that
currently interest you. The QuadraSurf™ con-
trol allows you set up four different personal
Surf lists using the colored buttons (on the
remote control), each holding up to ten chan-
nels in its quick viewing “list.”
Press the CHANNEL (+) or (-) but-
tons (or the NUMBER buttons) to
select a channel to add to one of the
SURF lists.
Press the SMILEY © button on the
remote control to ADD the channel to
one of the SURF lists.
Press the corresponding COLORED
(Red, Green, Yellow or Blue) button
to add the channel to that button’s Surf
list. (Up to ten channels per button can
be stored.)
%
>
SS
Repeat steps 1 through 3 to add additional
channels (up to 10) to each of the the SURF
lists.
To remove a channel from one of the SURF
Jam
|. ©
un
—
un
ча
И
Press the COLORED QuadraSurf™
button until the desired channel
appears. The screen will display the
channel number with a colored
“Smiley” face to indicate the Colored
button it relates to.
Un
7
Na
While the “Smiley” face channel
indicator is displayed, press the
FROWNIE @ face button. The
screen will read, “Remove item? -
Press @ J’
Press the FROWNIE & face button
again to confirm your decision to
remove the channel from the Surf list.
7
=
Nn
Repeat steps 4-6 to remove other channels
from Surf lists.
PIC SIZE
PHILIPS
\
© ed lid e:
© 8
8 © Rare From Lid?
ALTERNATE CHANNEL
Your remote also has an A/CH
(Alternate Channel) button. Pressing
this button will toggle between the
Current and one previously selected
channel.
%
PIC SIZE MAIN
FREEZE
PHILIPS
\ y
25
J
И
he QuadraSurf™ buttons on your remote
control allow you to store up to 10 chan-
nels per button (40 total). This is a great fea-
ture if you want to store all your favorite
Sports channels, Movie channels, or News
channels in one surf list. Family members can
have there own favorite list of channels. You
can even program the external A/V Input
jacks for one of the buttons making it a
“source” button for your external accessory
devices.
Assuming channels have now been added to
the four QuadraSurf™ lists (the four colored
buttons on the remote, see the previous page),
let's review how the feature works.
Press one of the pre-programmed
COLORED buttons on the remote
(Red, Green, Yellow or Blue). The
screen will display a smiley face with the
first programmed channel for that surf
list.
7
ПИ
a While the colored “smiley” face still
N y appears on the screen, press the same
COLORED button on the remote to
tune the second channel programmed for
that specific surf list.
7
>. Repeatedly pressing the same COL-
À ORED button while the “smiley” face
Ne .
appears will tune all the programmed
channels for that specific surf list. After
the last channel is tuned, pressing the
COLORED button again will return
you to the first channel in the list.
HW
Jd)
7
Repeat steps 1-3 for the other three
COLORED buttons (Surf lists) 1f
desired.
Pressing the “frownie” face button
will allow you to remove it from the
list (see the previous page for more
details).
ZU
How TO USE THE QUADRASURF CONTROLS
GE
2000
PHILIPS
\ )
| E Remove from list?
How To USE THE PROGRAM LIST CONTROL
he Program List Control will allow you to
quickly overview all the programmed
channels that have been placed into the tele-
visions memory (see the Auto Programming
section of this manual for more details). pro-
gram List will display the channel number,
the name of the channel if you have given it
one, and where it will have AutoLock turned
On or Off.
Press the PROGRAM LIST button on
\ th te control to show th t
\ e remote control to show the curren
list of installed channels (the current
channel will be highlighted). -
SN Press the CURSOR UP or DOWN >) JA
$ .
Ss buttons to scroll the list of channels, — fogs
^^ highlighting the one you want to acti- a a
vate. `
SH Press the CURSOR RIGHT button to Oo
N activate the channel. The TV will tune ® ©
to that channel.
AN Press the STATUS/EXIT button to ry
ee remove the menu from the screen. AZ]
\ ООО т <
PHILIPS
\ y
[ Vie Active Control monitors and adjusts
incoming video signals to help provide the
best picture quality.
When you choose to turn the Active Control
ON, the picture sharpness and noise reduc-
tion are controlled automatically. Active
Control adjusts these picture settings continu-
ously and automatically.
NOTE: Active Control is not available for
signals connected to the AV4 inputs.
Press the ACTIVE CONTROL but- x
X th 1 le th le
N on on the remote control to toggle the )
control options (Off, On, Display fo
Logo, or Display On) and select the | \ N
option that you want. © a
Da TES Day Cn
SY Press the STATUS/EXIT to remove =) ® = —
DS the menu from the screen. ©
9 en
[5 She = Dre lo == 6
If Display On is selected, a display screen OE
. . оО
will appear when the channel is changed с =
showing the picture setting. If Display PHILIPS
Logo is selected, the Active Control logo
will be displayed during channel changes. J a
27
How To USE THE SLEEPTIMER CONTROL
Have you ever fallen asleep in front of the TV,
only to have it wake you up at two in the
moming with a test pattern sound screech-
ing in your ears? Well, your TV can
enable you to avoid that discomfort by
automatically turning itself off. With the
Sleep Timer feature, you can set a timer to
automatically switch the TV OFF after a
period of time you choose (15-minute
increments up to 60 minutes, then 30-
minute increments up to 90 minutes, then
60-minute increments up to 240 minutes).
Press the SLEEP button on the
remote control. The SLEEP timer
onscreen display will appear in the
upper part of the screen.
During the last minute of a
SLEEP timer setting, an onscreen
countdown will be displayed.
2
ion
Secp 49
a
Z
Cae
Г.
Within five seconds, press the
SS
S SLEEP button repeatedly to pick the
&№& amount of time (15-minute increments
up to 60 minutes, then 30-minute
increments up to 90 minutes, then 60- During the last 10 seconds of a +
minute increments up to 240 minutes) SLEEP timer setting, an onscreen _
before the TV will turn itself off. display will read GOOD BYE.
Seep 120 |
[ww]
D
An onscreen countdown will appear during ®
the last minute before the TV shuts itself off. =
POE ®:
US O:
| ею |
e
Gi
0:
'@ ©
PROGRAM
В
=
OL
®
©
©
To see how many minutes remain before the TV
shuts itself off, press the STATUS/EXIT button.
О
О
O
O
PHILIPS
À Sleep Timer setting can be cancelled by press-
ing any button during the last minute of the oper-
ation. LV
Ho you ever wished you could freeze the
picture on the television broadcast to
write down a special telephone number or to
capture a needed address? Your television
will allow you to do just that with the press of
just one button on the remote control.
With a signal on the television screen,
simply press the FREEZE button on
the remote control to stop the picture
at any given moment.
7%
ion
SN Press the FREEZE button on the
¿Y remote control again to resume normal
N viewing.
”
ss,
Ze
al
After freezing a picture on the screen, when the
FREEZE control 1s turned OFF, the normal sig-
nal programming will be shown at it’s present PHILIPS
time, The signal that was being shown while the
picture was frozen will not be viewable.
ji
28
How TO USE THE AUTOPICTURE™ (CONTROL
Wen you're watching a movie or a video
game, your TV has automatic video con-
trol settings that will match with your current
program source or content. AutoPicture™
quickly resets your TV's video controls for a
number of different types of programs and
viewing conditions that you may have in your
home. The Movies, Sports, Weak Signal, and
Multimedia AutoPicture™ controls have been
preset at the factory to automatically adjust the
TV's brightness, color, picture, sharpness, tint,
and color temperature levels. The Personal
AutoPicture™ settings are the ones that you
made through the PICTURE options within the
onscreen menu
Press the PICTURE button on the
“e PA Z
ной a
7
ПИ
remote control. The current =
AutoPicture™ setting will appear in the
middle of the screen. = weak Som e
Glo CS 38
SN Press the PICTURE button repeatedly Mes Y
N to select either Personal, Movies, Sports,
Ss Weak Signal, or Multimedia picture set-
tings. — rai лв
Co CC 35
NOTE: The PERSONAL setting and the PIC- re A
TURE options within the onscreen menu are
the same. This is the only option in
AutoPicture™ that can be changed. To adjust
these settings, use the PICTURE options within
the onscreen menu. All other settings are set up
at the factory during production and cannot be
adjusted.
utoSound™ allows you to select from four
Jactory-set controls and a personal control
that you set according to your own preferences
through the onscreen Sound menu. The four
factory-set controls (Multimedia, Speech,
Music, and Movies) enable you to tailor the TV
sound so as to enhance the particular program
you are watching. You can change the Personal
setting to your preference. Follow these steps to
select any of the options.
Press the SOUND button on the
remote control. The current
AutoSound™ setting will appear in the
middle of the screen.
%
=
SN Press the SOUND button repeatedly >
& 10 toggle among the four settings: S | Msic
Sw Personal , Multimedia,Speech, Music, or ee 5
Movies.
Remember, only the PERSONAL control can
be changed by the viewer. This changes the | Nbvies
Treble CCN 45
settings in the main onscreen menu’s SOUND
controls.
ss COP EE 38
AutoSound™ works only with the programs
coming through the ANTENNA/CABLE
(ANT) input on the rear of the TV (RF
audio). It will not control the sound levels
for the external connections.
29
[Я SerTING THE REMOTE CONTROL TO OPERATE ACCESSORY DEVICES
MODE SELECTION и
TP remote control that is supplied with your tele- VCR: DVD SAT AMP ACC
ITER
vision may also work with a variety of infrared
controlled accessory devices such as VCRs, Cable
Boxes, DVD Players, Satellite Receivers, etc. The
following instructions explain how to change the
remote mode for the type of accessory device you
are using.
Press and release the SELECT button on
the remote control. The last used mode before
TV-MODE will lit up for 2 seconds. After 2
seconds, the LED for that MODE will begin A N
to flash.
%
Power
SN Press and release the SELECT button on
Sh the remote control within 2 seconds to move
to the next MODE. the new MODE’s LED
will lit for 2 seconds, then begin to flash.
7
SN Repeat the steps above to continue through
= the MODES until the desired MODE is
selected. NW
=
MODE TIMEOUT SETTINGS: NN
When the remote MODE times out, the remote con- NN
trol will revert to the TV MODE. Timeout length NN
occurs from the last command or button press in any AD
of the MODE:s. The length of time before a MODE ;
timeout occurs can be changed.
НЙ
“i
“ty,
Y
Ze
To change the length of the timeout duration, fol-
low the steps below:
НИЙ
Simultaneously, press the SELECT button
e
Y
&
ee and the NUMBERED button from the list
below to reset the desired amount of timeout
length.
Digit 1 = 15 seconds before timeout
Digit 2 = 30 seconds before timeout
Digit 3 = 60 seconds before timeout
Digit 4 = 120 second before timeout
(Example: You want the MODE timeout
Z
Un,
to be 60 seconds, you would need to usa — ON
press the SELECT button and the DN NA
NUMBER 3 button at the same time.)
PROGRAM — A/CH
В
> a
\ i à € Y
No œ be (rover)
It is recommended that you use Philips FREEZE
PIC SIZE MAIN
brand external accessory devices with your
Philips television to insure proper remote PUNILIDPS
control functions. If you are using Philips
brand accessory devices, your remote con-
trol should be ready to use with these
devices. Ц y
30
ff
SETTING THE REMOTE CONTROL TO OPERATE ACCESSORY DEVICES
TI" remote control supplied with your TV can
also be programmed by entering a specific code
for your type of accessory device. Follow the
instructions below to program the remote using one
of the codes listed on pages 32-34.
Codes from
page 32-34
%
НИЙ
> Look up the codes for your brand of acces-
SN
sory device. 00 5 4
SN Once you have the codes, simultaneously
press the SELECT and OK buttons.
Se Press the NUMBER button that corresponds 0 0 5 6
№& to the type of accessory device you are using.
Digit 1 = Cable
Digit 2 = VCR 0057
Digit 3 = DVD
Digit 4 = SAT 0 89 1
Digit 5 = AMP Power
©
&\ Press the NUMBERED button to enter the ws
SS 4 digit code number from pages 32-34. 0 9 44 al
E Be sure the remote is in the correct MODE > (à DNS
NN (see previous page) and press the POWER a a SE SN
7,
N
button. If the accessory device powers ON S
Ns
your finished. If it does not power ON, repeat
the procedure with another code listed. If all
codes fail, the remote will not control your
specific accessory device.
|
SN
®
a
и
SS
+
(Example: You have a Cable Box from Archer and
want to program the remote. It’s code is 0049. Press
the SELECT and STANDBY button simultaneously.
Press the NUMBER | for Cable, then enter the list- ss
ed four digit code; i.e.; 1, 0, 0, 4, 9.) Nu
= QuadraSu rm
PIC SIZE MAIN
РИ
It is recommended that you use Philips
brand external accessory devices with your
Philips television to insure proper remote
control functions. If you are using Philips \
brand accessory devices, your remote con-
trol should be ready to use with these
devices.
31
REMOTE CONTROL DIRECT ENTRY CODES FOR ACCESSORY DEVICES
VCR CODES
Admiral ................. 2027, 2052
Adventura .................... 2001
Ako ....... ...ereoere... 2059
Aiwa ..... 2001, 2017, 2062, 2070, 2072
Akai ..... 2021, 2029, 2038, 2060, 2063
Akiba ........ ... e... ....... 2034
Ambassador .................. 2011
American Action ............... 2059
American High ................ 2015
Amstrad ....... 2001, 2059, 2067, 2068
Anam .................. 2017, 2042,
Ce 2054, 2057, 2059, 2082, 2084
Anam National . ...... 2042, 2054, 2087
Anitech ...................... 2034
Asa .................... 2017, 2035
Asha ........................ 2057
Asuka ........ 2. ..0rerere.. 2017
Audiovox .................... 2017
Baird ......... 2001, 2021, 2037, 2039
Basic Line .......... 2011, 2034, 2059
Beaumark .................... 2057
Bell 8 Howell ................. 2037
Blaupunkt ..... 2003, 2005, 2010, 2014,
.. . 2041, 2042, 2048, 2054, 2055, 2075
Brandt ............. 2047, 2064, 2065
Brandt Electronic .............. 2021
Broksonic .2002, 2040, 2046, 2052, 2078
Bush.......... 2034, 2052, 2059, 2072
Calix .......... cco i 2017
Canon .......o-_emerererreece, 2015
Capehart ..................... 2011
Сагуег ............ к... лвкев,, 2035
(0:15 (0) A 2011
CCE ................... 2034, 2059
CGE ............ 2001
Cimline ...................... 2034
Cineral ...................... 2059
Citizen ......... .. .. e. ... 2017, 2059
Clatronic .............. cv... 2011
Colt ....... ci 2034
Combitech . ................... 2072
Condor ...................... 2011
Craig ....2017, 2026, 2034, 2057, 2058
Crown ............. 2011, 2034, 2059
Curtis Mathes ...2015, 2021, 2032, 2042
Cybemex ..................... 2057
Cyrus er e a Lea eee 2035
Daewoo . .2011, 2024, 2025, 2059, 2083
Dansai ...................... 2034
Daytron ...................... 2011
DeGraaf ................ 2022, 2043
Decca .................. 2001, 2035
Denon ....................... 2022
Dual ........................ 2021
Dumont ............ 2001, 2035, 2037
Dynatech ..................... 2001
Elbe ........................ 2018
Elcatech ..................... 2034
Electrohome .................. 2017
Electrophonic ................. 2017
Emerex ...................... 2012
Emerson .2001, 2002, 2017, 2023, 2040,
.. . 2046, 2051, 2052, 2059, 2078, 2083
ESC .................... 2057, 2059
Ferguson ...... 2021, 2039, 2064, 2065
Fidelity ...................... 2001
Finlandia ................ 2035, 2037
Finlux ......... 2001, 2022, 2035, 2037
Firstline ..2017, 2023, 2024, 2034, 2052
Fisher ......... 2023, 2026, 2030, 2037
Frontech ..................... 2011
Fuji ......... 42 aan 2015
Funai ........................ 2001
Garrard ...................... 2001
GE ........... 2015, 2027, 2032, 2057
GEC ...... e a sas eee 2035
General ...................... 2011
GoVideo ................ 2077, 2081
Goldhand .................... 2034
Goldstar ....... 2017, 2018, 2053, 2079
Goodmans 2001, 2017, 2034, 2059, 2075
Gradiente ................ 2001, 2008
Graetz ........ 2005, 2021, 2037, 2057
Granada ............ 2025, 2035, 2037
Grandin ............ 2001, 2017, 2034
Grundig . .2003, 2005, 2007, 2010, 2034,
‚2035, 2048, 2050, 2054, 2069, 2071, 2075
Hanseatic .................... 2017
Harley Davidson ............... 2001
Harman/Kardon ........... 2018, 2035
Harwood ..................... 2034
HCM ........................ 2034
Headquarter ................... 2025
Hinari ......... 2004, 2034, 2057, 2072
Hi-Q ........................ 2026
Hitachi 2001, 2004, 2021, 2022, 2043, 2057
Hughes Network Systems ........ 2022
Hypson ...................... 2034
Imperial ..................... 2001
Ingersol ...................... 2004
Interfunk ..................... 2035
ITT ............... 2005, 2021, 2025,
Ce ee 2037, 2038, 2057, 2074
ITV ........ eee... 2017, 2059
Jensen ....................... 2021
IVC .............. 2008, 2021, 2033,
Ce ee 2049, 2050, 2074, 2080
Kaisui ....................... 2034
KEC ................... 2017, 2059
Kendo .................. 2038, 2052
Kenwood ........... 2018, 2021, 2033
KLH ........................ 2034
Kodak .................. 2015, 2017
Kompel ....................... 2034
Layco ....................... 2034
Lenco ....................... 2059
LG ..... LL LL La ea ee 2079
Lloyd's.................. 2001, 2051
Loewe ........ 2004, 2005, 2017, 2035
Logik .............. 2004, 2034, 2057
Luxor ....2023, 2025, 2027, 2037, 2038
LXT ....... к кк... 2017
M Electronic .................. 2001
Magnasonic .......... ......... 2059
Magnavox ..... 2001, 2015, 2019, 2035
Magnin ...................... 2057
Manesth ................. 2024, 2034
Marantz ....... 2003, 2005, 2015, 2035
Marta ....................... 2017
Matsui .2004, 2016, 2036, 2052, 2070, 2072
Matsushita .......... 2015, 2042, 2055
Ме1 ......................... 2015
Melectronic ................... 2018
Memorex .......... 2001, 2015, 2017,
as 2019, 2025, 2026, 2027, 2037,
.. . 2052, 2057, 2062, 2085, 2087, 2088
Memphis ..................... 2034
Metz .............. 2003, 2005, 2017,
Ce 2042, 2048, 2055, 2069
MGA ................... 2023, 2057
MGN Technology .............. 2057
Mincrva ..................... 2048
Minerva ............ 2005, 2010, 2048
Minolta ...................... 2022
Mitsubishi .2023, 2027, 2033, 2035, 2045
Motorola ................ 2015, 2027
MTC ................... 2001, 2057
Multitech ................ 2001, 2034
Murphy ........... eee... 2001
МАЮ ........................ 2031
National ..................... 2054
NEC ..... 2018, 2020, 2021, 2033, 2037
Neckermann .................. 2035
Nesco ....................... 2034
Nikko ....... .—. ....ererere.. 2017
Nikon .......... Ñ. ...sereree., 2014
МоЫех ...................... 2057
Nokia ......... 2025, 2037, 2038, 2057
Nokia ....2021, 2025, 2037, 2038, 2057
Nordmende .2021, 2061, 2064, 2065, 2074
Oceanic ........... ...... 2001, 2021
Okano .................. 2063, 2070
Olympus ................ 2015, 2054
Optimus ........... 2017, 2027, 2031,
... 2037, 2042, 2077, 2086, 2087, 2088
Orion ............. 2002, 2004, 2016,
....2036, 2046, 2052, 2070, 2072, 2078
Osaki .............. 2001, 2017, 2034
REMOTE CONTROL DIRECT ENTRY CODES FOR ACCESSORY DEVICES
VCR Codes Cont’d
OttoVersand .................. 2035
Palladium . ..... 2005, 2017, 2021, 2034
Panasonic ............... 2015, 2042,
Ce 2053, 2054, 2055, 2087
Pathe Cinema ................. 2016
Pathe Marconi ................ 2021
Penny 2015, 2017, 2018, 2020, 2022, 2057
Pentax ....................... 2022
Perdio ....................... 2001
Philco ........ 2015, 2018, 2052, 2078
Philips . . .2015, 2035 (DEFAULT VCR),
Ce ee 0 2074, 2075
Phonola ..................... 2035
Pilot ........... eres. 2017
Pioneer ............ 2031, 2033, 2035
Portland ..................... 2011
Profex ....................... 2066
Profitronic ................... 2057
Proline ...................... 2001
Proscan ...................... 2032
Protec ....................... 2034
Pulsar ....................... 2019
Pye ..... .neenooeoro ee 2035
Quarter ...................... 2025
Quartz... .................... 2025
Quasar ............. 2015, 2042, 2087
Quelle ....................... 2035
Radio Shack ............. 2001, 2085
Radiola ...................... 2035
Radix ....................... 2017
RCA 2015, 2022, 2027, 2032, 2038, 2057
Realistic ................ 2001, 2015,
aaa 2017, 2025, 2026, 2027, 2037
REX ................... 2021, 2074
RFT ........................ 2075
Ricoh ....................... 2014
Roadstar ...... 2017, 2034, 2057, 2059
Runco ....................... 2019
Saba .............. 2021, 2049, 2050,
Ce 2061, 2064, 2065, 2074
Saisho ........ 2004, 2016, 2036, 2052
Salora ............. 2023, 2025, 2038
Samsung ...... 2024, 2037, 2076, 2077
Sanky .................. 2019, 2027
Sansui ................. 2001, 2021,
Ce 2033, 2052, 2058, 2078
Sanyo ......... 2025, 2026, 2037, 2057
Saville ...................... 2072
SBR ........................ 2035
Schaub Lorenz . .2001, 2005, 2021, 2037
Schneider .......... 2001, 2034, 2035
Scott ......... 2023, 2024, 2040, 2046
Sears .................. 2001, 2015,
aaa 2017, 2022, 2025, 2026, 2037
SEG ................... 2057, 2066
SEI .......... 2004, 2035
Seleco....................... 2021
Semp ...... Lee 2024
ЗепЫа ................. к... 2011
Sharp .................. 2027, 2073
Shintom ................ 2034, 2037
Shogun ...................... 2057
Shorai ....................... 2004
Siemens ................ 2003, 2005,
.. . 2010, 2017, 2030, 2035, 2037, 2048
Silva ....... . a ea ee 2017
Singer .................. 2024, 2034
Sinudyne ................ 2004, 2035
SolavoX ........ o... enero. 2011
Sonolor . ..................... 2025
Sontec .......... i 2017
Sony ..... 2001, 2012, 2013, 2014, 2015
STS LL. 211 LL LL LL LL Lea a» 2022
Sunkai ...................... 2070
Sunstar ............... 0... .... 2001
Suntronic .................... 2001
Sylvania . ...... 2001, 2015, 2023, 2035
Symhonic .................... 2001
Tashiko ...................... 2001
Tatung ............. 2001, 2021, 2035
Teac ................... 2001, 2021
TEC .... a ea eee 2011
Technics ........... 2015, 2042, 2054
Teknika ....... 2001, 2015, 2007, 2017
Teleavia ..................... 2021
Telefunken 2021, 2047, 2058, 2064, 2074
Tenosal ...................... 2034
Tensai .................. 2001, 2066
Thomas ...................... 2001
Thomson ........... 2021, 2064, 2074
Thom ............. 2016, 2021, 2037
ТМК ................... 2051, 2057
Toshiba ..2021, 2023, 2024, 2035, 2074
Totelevision ............. 2017, 2057
Towada ...................... 2066
Uher ........................ 2057
Unitech ...................... 2057
Universum ......... 2001, 2006, 2010,
.. . 2017, 2035, 2038, 2048, 2057, 2067
Vector .......... oii... 2024
Vector Research .......... 2018, 2020
Victor ............. 2008, 2021, 2033
Video Concepts ........... 2020, 2024
Videosonic ................... 2057
Wards ............. 2001, 2015, 2022,
.. . 2026, 2027, 2032, 2034, 2035, 2057
White Westinghouse ....... 2052, 2059
ХКЕ-1000 ..................... 2001
ХКЕ-1001 ..................... 2015
XR-1002 ..................... 2034
Yamaha ...................... 2018
33
Yamishi ..................... 2034
Yokan ....................... 2034
Yoko ................... 2011, 2057
Zenith ...2001, 2014, 2019, 2052, 2078
DVD Codes
Akai .......... ee a ea ea ee 5316
Harman/Kardon ............... 5314
IVC... enero. 5311, 5318
Kenwood .................... 5307
Magnavox .............. er... 5302
Mitsubishi .................... 5303
Onkyo ............. 5302, 5317, 5319
Panasoni ................ 5301, 5322
Philips ...5302, 5308 (DEFAULT DVD)
Pioneer ............ 5305, 5312, 5321
Proscan ...................... 5304
КСА ........................ 5304
Samsung ..................... 5313
Sharp ......... ere... 5320
Sony ...... ii Lee 5306
Technics ..................... 5301
Theta Digital .................. 5312
Thomson ..................... 5310
Toshiba ...................... 5302
Yamaha ................. 5301, 5309
Cable Box Codes
ABC ..... 3002, 3003, 3004, 3006, 3008
Andover ..................... 3037
Bell & Howell ................ 3006
Birgmingham Cable Communication . . .3020
British “Telecom ........... 3002, 3012
Cabletime ..... 3016, 3019, 3025, 3029
Clyde ....................... 3011
Contec ........ .. e... ree, 3009
Cryptovision .................. 3038
Dachan ...................... 3043
Daeryung .................... 3003
Decsat....................... 3027
Everquesst ................... 3007
Fimnet ...................... 3028
France Telecom ............... 3030
GEC ........ a ea eee 3011
Gemini ............ cv... 3007
General Instrument . .3004, 3020, 3031, 3046
Goldstar ................ 3014, 3047
Grundig ..................... 3035
Hitachi ...................... 3004
Jasco .. 1.121111 LL Lee a ea ea ee 3007
Jerrold ............ 3002, 3004, 3005,
RE 3006, 3007, 3020, 3031, 3046
LG Alps .......... er... 3044
Memorex .................... 3001
Mnet ................... 3009, 3028
NOW iii eee 3041
Now oi ee 3041
(0-1 oo ea ea eee 3009
Pacific ...................... 3039
Panasonic ............... 3001, 3013
Paragon ..................... 3001
Pioneer ................. 3014, 3036
Pulsar ....................... 3001
PVP Stereo Visual Matrix ........ 3002
Quasar ........... 0... 3001
Radio Shack .................. 3007
Rembrandt ................... 3004
Runco ....................... 3001
Salora ....................... 3026
Samsung ................ 3014, 3040
Satbox ............... .. ..... 3024
Scientific ........... 3003, 3032, 3049
Scientific Atlanta ..... 3003, 3008, 3021
Seawoo ...... a a eue 3045
Signal ....................... 3007
Signature .................... 3004
Starcom ................. 3002, 3007
Stargate ..................... 3007
Starquest . .......... 3007
STS LL. LL LL LL LL La Lea ea eee 3015
Tathan ....................... 3043
Tele+1 ...................... 3028
Teleservice ................... 3022
Tocom ...................... 3005
Tongkook ............... 3042, 3048
Toshiba ...................... 3001
Todi ...... oo 1 12111 ea ea eee 3023
TUSA ........ 2..5... к кк к... 3007
United Cable .................. 3002
Videoway .................... 3017
Visicable+ .................... 3033
Westminster .................. 3012
Wolsey Gene ................. 3037
Zenith .................. 3001, 3034
Absat ....................... 4006
Alba.......... 4029, 4034, 4037, 4052
Aldes ....................... 4019
Amstrad ................ 4003, 4016,
Ce 4025, 4038, 4039, 4042
Ankard ........ 4013, 4019, 4030, 4044
Anttron ................. 4009, 4034
Armstrong ................... 4015
AST 4027
Astra ............ i... 4005
Astro .............. 4008, 4039, 4045
Avalon ...................... 4031
74 < CEA 4030, 4046
Beko ............ ae ee 4010
Best ......... e eee 4030
Blaupunkt .................... 4008
Boca ................... 4015, 4043
BrainWave ................... 4022
British Sky Broadcasting ........ 4058
BT ... 4053
Bush ........................ 4002
Cambridge ................... 4024
Canal Satellite ................ 4059
Canal+ ...................... 4059
Channel Master . ............... 4029
СМ№Т 2..2... . 2..2... к кк к... 4045
Comlink ..................... 4019
Соппех1юп ................... 4031
CIowDh......o_..eerereree.. 4015
Cyrus ..... .....eroerroeoro.. 4011
10). ov... 4054
DD AS 4029
DNT ................... 4011, 4031
Echostar ........... 4031, 4036, 4061
Emanon ..................... 4034
Ferguson ...... 4002, 4009, 4010, 4023
Fidelity ...................... 4016
Finlux ........ 4005, 4024, 4032, 4037
Fracarro ..................... 4061
Freecom ..................... 4034
FTEHumax .................. 4060
Fube .............. 4030, 4031, 4034
Galaxis ............ 4019, 4057, 4060
General Instrument ............. 4012
Gold Box .................... 4059
Gooding ..................... 4048
Goodmans ................... 4010
Grundig ............ 4008, 4010, 4048
G-Sat L a Lea aa» 4009
Hinari ....................... 4009
Hirschimann . .4008, 4032, 4039, 4040, 4049
Hitachi ...................... 4037
Houston ..................... 4053
Huth ......... 4013, 4015, 4019, 4026
Intervision ................... 4050
Invideo ...................... 4061
ITT ...... aereo. 4005
Johansson .................... 4022
IVC LL LL LL LL LL ea Lea a» 4048
Kathrein .4004, 4006, 4008, 4011, 4035, 4041
Kreiselmeyer ................. 4008
Kyostar ...................... 4034
LaSat .................. 4043, 4045
Lenco ............ e ae ea 4034
Lennox ...................... 4050
Lupus ....................... 4030
Luxor .................. 4005, 4049
Manhattan .......... 4037, 4045, 4050
Marantz ......o_é—e.—erererereoo 4011
Maspro ................. 4004, 4023
Matsui........... rr... 4024, 4048
34
Mediamarkt .................. 4015
Mediasat ..................... 4059
Minerva ..................... 4048
Morgan's ................ 4015, 4043
Navex . o.oo iii ieee ee 4022
Nevhaus ..................... 4039
Neusat .......oeeeeevorrereo. 4057
Newhaus ..................... 4013
Nokia .4005, 4032, 4037, 4049, 4054, 4063
Nordmende ................... 4029
Orbitech ..................... 4039
Oxford ...................... 4024
Pace .............. 4002, 4009, 4014,
Ce 4023, 4037, 4055, 4058
Palladium .................... 4048
Palsat ....................... 4039
Panda ....................... 4037
Philips ................. 4007, 4011,
Ce 4020, 4037, 4048, 4059
Phonotrend .............. 4019, 4050
Pioneer ................. 4021, 4059
Planet ....................... 4061
Promax ...................... 4037
Prosat ....................... 4019
Quadral ................. 4029, 4044
Radiola ...................... 4011
Radix .................. 4031, 4064
RFT ............... 4011, 4013, 4019
Saba ................... 4023, 4045
Sabre ....................... 4037
Sagem ....................... 4056
Salora ....................... 4005
SAT .................... 4027, 4038
Satcom ................. 4026, 4051
Sate... oe 4009
Satmaster .................... 4026
Satpartner ..... 4022, 4034, 4040, 4045
Schwaiger ............... 4009, 4041
Seemann ................ 4031, 4046
SEG ................... 4030, 4034
Siemens ..................... 4008
Skymaster .......... 4019, 4044, 4051
Sony ................... 4017, 4018
Strong .......... oi e ee 4062
Sunstar .............. i... 4043
Tantec .................. 4023, 4037
Techniland ................... 4026
Technisat ................ 4001, 4039
Telefunken ................... 4034
Teleka .................. 4015, 4052
REMOTE CONTROL ACCESSORY DEVICE RELATED BUTTONS
Whe using the TV remote control with an
external accessory device, first make
certain the proper mode is selected and the
remote has been programmed to control the
device (see pages 30-31).
Press the SELECT button repeatedly
to highlight the proper accessory mode
(VCR, DVD, SAT, AMP, or ACC).
Z
ТИ,
il
”
de
7
N
N
Point the top of the remote toward the
front of the accessory device’s remote
sensor window when pressing buttons.
%,
External Accessory Mode Indicator
when the Select button is repeatedly pressed,
the indicator will highlight what mode the
remote control is in.
Select Button
Press repeatedly to highlight and select one of
the accessory modes within the Mode Indicator.
Rewind Button (Fast Reverse)<<
Press to rewind tapes or fast rewind DVD
discs. For some accessory devices, the STOP
button may have to be pressed first, then
REWIND. In playback mode, hold down the
button to view the picture moving rapidly in
reverse.
Stop Button H
Press to stop the playback of a tape or disc
in playback, rewind, fast forward, and so on.
Record Button
_ |
_L
5
Hold the REC(ord/Sap) and PLAY > buttons
down to begin a VCR recording.
Remember, the VCR buttons on the remote will
not operate your VCR if those features are not
found on your VCR remote control.
NOTE: All VCR functions (particularly
Search, Rewind, Fast Forward, etc.) will oper-
ate the same as with the original VCR remote
control provided with the VCR.
A0
Power
VCR DVD SAT AMP ACC )
© с
=
m
POO
) @OPO (D@
QuadraSurf""
ACH
(vn
“Lo
—— Power Button
Press to turn the accessory device ON and
OFF.
Pause Button ll
Press to temporarily stop the videotape,
DVD disc, etc., during a playback or
recording. Press again to release Pause.
Fast Forward Button (Wind Forward) pp
Press to rapidly advance a videotape, DVD
disc, etc. For some devices, you may need
to press the STOP button first, then the
FAST FORWARD button. In playback
mode, hold the button down to view the
picture moving rapidly in the forward
direction.
Play Button >
Press to begin playback of a videotape or
DVD disc, etc.
Channel + and — Buttons
Press to scan up or down through the chan-
nel numbers using the external accessory
devices tuner (some accessory devices do
not have channel tuners).
Number Buttons
Press buttons for the direct selection of
external device channels 1f the unit is
equipped with a tuner.
(ОО) ©) ©)
PIC SIZE MAIN
FREEZE
PHILIPS
35
TV/VCR Button
Press while in the VCR mode (the VCR indi-
cator on the front of the unit will light) to view
the playback of a tape. Press again to place in
the TV position (the VCR indicator light will
go off) to view one program while recording
another program.
TROUBLESHOOTING TIPS
No Power
+ Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
* Check that the outlet is not on a wall switch.
* Be sure the fuse is not blown on the AC power strip, if one is
being used.
No Picture
+ Check antenna connections. Are they properly secured to the
TV's ANT 75Q plug?
e Check the TUNER MODE control for the correct tuner set-
ting.
* Try running the Auto Program feature to find all available
channels.
* Press the AV button on the remote to make sure the correct
signal source is selected (FRONT, AV1, AV2, Current
Channel, etc.).
No Sound
* Check the VOLUME buttons.
+ Check the MUTE button on the remote control.
* Tf youre attempting to hook up auxiliary equipment, check
the audio jack connections located on the front of the TV.
Remote Does Not Work
* Check the batteries. If necessary, replace them with AA
Heavy Duty (Zinc Chloride) or Alkaline batteries.
Remote Does Not Work Continued
* Clean the remote control and the remote control sensor win-
dow on the TV.
* Check the TV power cord. Unplug the TV, wait 10 seconds,
then reinsert the plug into the outlet and push the POWER
button again.
* Be sure the fuse is not blown on the AC power strip, if one is
being used.
* Check to be sure the TV outlet is not on a wall switch.
TV Displays Wrong Channel or No Channels Above 13
* Repeat channel selection.
* Add the desired channel numbers (using the CHANNEL
EDIT control) into the TV’s memory.
* Check to be sure the TUNER MODES are set to the CABLE
option and run the Auto Program feature to find all available
channels.
TV Displays white lines in letterbox when viewing a DVD
disc
* Some DVD Discs are encoded with as much as 30% more
video information to give the best possible picture quality.
With the DVD Player in the 16:9 picture format, the play-
back of this type of disc with extra video information, can
produce a number of small white lines in the upper portion
of the black letterbox area. With some of these discs, this sit-
uation is unavoidable and it does not require a service call.
IMI CLEANING AND CARE
WARNING Concerning Stationary Images on the TV
Screen:
Do not leave stationary or letterbox images on screen for
extended periods of time. This can cause uneven picture-
tube aging.
Normal use of the TV should involve the showing of pictures
that contain constantly moving and changing images that fill the
screen. Be careful not to leave nonmoving images on screen for
extended periods of time, or to display the same images on
screen too frequently, because subtle ghost images can be left
on the picture tubes. Sources of stationary images may be DVD
disks, laser disks, video games, CD-1 disks, videotapes, digital
television boxes, broadcast channels, cable channels, satellite
channels, and others. Here are some examples of stationary
images (this is not an all-inclusive list; you may encounter
others in your viewing):
DYD menus—listings of DVD disk content
Letterbox black bars—shown at the top and bottom of the
TV screen when a wide screen (16:9) movie is viewed on a
TV with standard (4:3) aspect ratio.
Video-game images and scoreboards
Television station logos—present a problem if they are
bright and stationary; moving or low-contrast graphics are
less likely to cause uneven aging of the picture tube
Stock-market tickers—presented at the bottom of the TV
screen
Shopping channel logos and pricing displays—bright and
shown constantly or repeatedly in the same location on the
TV screen.
36
Placement of the TV
* To avoid cabinet warping, cabinet color changes, and
increased chance of set failure, do not place the TV where
temperatures can become excessively hot; for example, in
direct sunlight or near a heating appliance.
* Be sure to allow a free flow of air to and from the perforated
back cover of the set.
Cleaning
* To avoid possible shock hazard, be sure the TV is unplugged
from the electrical outlet before cleaning.
* Regularly dust the TV with a dry, nonscratching duster to
keep the TV clean.
* When cleaning the TV, take care not to scratch or damage the
screen surface. Avoid wearing jewelry or using anything
abrasive. Do not use household cleaners. Wipe the front
screen with a clean cloth dampened with water. Use even,
easy, vertical strokes when cleaning.
* Gently wipe the cabinet surfaces with a clean cloth or sponge
dampened in a solution of cool, clear water and a mild soap
or detergent. Use a clean, dry cloth to dry the wiped surfaces.
* Occasionally vacuum the ventilation holes or slots in the back
cover of the set.
* Never use thinners, insecticide sprays, or other chemicals on
or near the cabinet, as they might cause permanent marring
of the cabinet finish.
INDEX
Active Control™ |... reee. a aa 0 27
Alternate Channel Control .......................... 25
Audio Out Control ............... i... 10
AutoChron™ Controls .............. cc... 12
AutoLock™ Controls
Access Code ........... ii ee a aa ee 14
AutoLockTM Review Screen ........................ 20
Blocking Programs based on Movie Ratings ........... 17
Blocking Programs based on TV Ratings .............. 18
Locking Channels ............................... 15
Clearing All Locked Channels ...................... 16
Understanding the AutoLock™ Features .............. 13
AutoPicture™ Control ............................. 29
Auto program Controls .............................. 6
AutoSound™ Control ............... cc. i... 29
AVL (Automatic Volume Leveler) Control .............. 10
Balance Control .............. i. 10
Bass Control ........... к кн ву вв кеввиеввнне, 10
Brightness Control ................................. 9
Care and Cleaning Information ....................... 36
Channel Edit Cotnrols . .................... a aa» 6
Closed Captioning .................... eee. 22
Color Control ........... e... reee 9
Color Temperature (Color Temp) Control ................ 9
Dynamic Bass ...........o i a aa 0 10
Dyn(amic) Contrast Control .......................... 9
Dynamic NR (Nosie Reduction) ...................... 24
Factory Service Locations ........................ 38-39
Feature Highlights ................................. 4
Freeze Control ............. iii. 28
Incr.(edible) Surround Control ....................... 10
Index RR aa 00 37
Language Control ............... i... 5
37
IM
Name Conrol ............ iii. 7-8
Permanent OSD .......... 2... ere. 24
Picture Control .............. iii, 9
Program List Control .............................. 27
QuadraSurf™ Controls .................. cc... 25-26
Registration of TV Information ........................ 2
Remote Control Use with Accessory Devices
Code-Entry Method of Identification ................. 31
Mode Selection ............. i. 30
Direct-Entry Code List ......................... 32-34
Accessory Device Specific Buttons .................. 35
Rotation Control ............ in. 23
Safety Information ................................. 3
SAP (Secondary Audio Programs) Control .............. 10
Sharpness Control . .............. i. 9
Sleep Timer Control ................... erre... 28
Stereo/Mono Control ........... .. ere... err.. 10
Timer Controls
Activate Control . ......... erre... 11
Clock, Time Control ........... i. 11
Display Control ............ i... 11
Progam No. Control . ............................. 11
Start Time Control .............. a... 11
Stop Time Control .................. o.oo... 11
Tint Control ........... i 9
Treble Control ............ iin. 10
Troubleshooting ............... on. 36
Tuner Mode Controls .............. i... 5
TV Speaker Control .............. i... 10
Warranty (Limited) ................................ 40
Wide Screen Format Controls ........................ 21
FACTORY SERVICE LOCATIONS
Detroit/Toledo 5
Na
Cleveland/
. y NOhio*
* San Francisco/Metro Ares Chicago | Xx Co umbus,
* Los Angeles =
у 7% Charlotte
—— Knoxville/E Tennessee
a
Atlanta/N Georgia
x * Dallas
% Indicates In-Home Service Only /— or ~ 2 7 Xx Orlando
Milwaukee: call Chicago | Houston . Tampa/W Florida
Cincinnati and Columbus: call Cleveland k Ft. Myers/SW Florida
Nashville and Chattanooga: call Knoxville MiamVSE Florlda
Washington/Baltimore: call Philadelphia
Charlotte: call Atlanta
All Florida locations; call Tampa
* Indicates In-Home/Carry-In Service
NOTE: If you reside in one of our Philips Factory Service Branch areas (see directory on back), you can contact the nearest Service Branch to obtain
efficient and expedient repair for your product. If your product is In-Warranty, you should have proof-of-purchase to ensure No Charge Service. For
Out-of-Warranty service, call the location nearest you.
NOTA: Si vous résidez dans une des régions desservies par une succursale de service après vente du fabricant Philips (voir liste ci-dessous), vous
pourrez contacter la branche de service après vente la plus près de chez vous pour obtenir Un service après vente rapide et efficace. Si le produit est
sous garantie, il suffira de présenter une preuve d'achat pour bénéficier d'un service sans frais. Pour les produits non couverts par la garantie, con-
tactez le centre le plus près de chez vous.
NOTA: Si Ud. reside en una de nuestras zonas para sucursales Philips de servicio al de fábrica (ver directorio más abajo), Ud. puede comunicarse con
la sucursal de servicio más cercana para obtener una reparación oportuna y eficaz de su producto. Si su producto está todavía bajo garantía, Ud.
debe presentar comprobante de compra para no ocasionar ningunos cargos por servicio. Para servicio después del vencimiento de la garantía, llame
al lugar más cercano de los abajo indicados.
In Canada
How you can obtain efficient and expedient carry-in, mail-in, or in-home service for your product
Please contact Philips at 1-800-661-6162 (French speaking)
1-800-363-7278 (English or Spanish speaking)
Au Canada
Comment obtenir le service après-vente pour les produits apportés ou envoyés par la poste à notre centre de service ou le service à domicile
Veuillez contacter philips &: 1-800-661-6162 (Francophone)
1-800-363-7278 (Anglais ou Espagnol)
En el Canada
Cómo recibir servicio efficiente para su producto, en persona, por correo o adomicillo
Favor de comunicarse con Philips al: 1-800-661-6162 (francôfono)
1-800-363-7278 (Inglés o Español)
MAC2929 Rev. DD - 1/1/2002 EL4482-3 Rev. DD
3135 015 07541
38
FACTORY SERVICE LOCATIONS
QUALITY SERVICE IS AS CLOSE AS YOUR TELEPHONE! SIMPLY LOOK OVER THE LIST BELOW FOR THE NUMBER OF A FACTORY SERVICE CENTER
NEAR YOU. YOUR PRODUCT WILL RECBVE EFFICIENT AND EXPEDIENT CARRY-IN, MAIL-IN, OR IN-HOME SERVICE, AND YOU WILL RECEIVE PEACE OF MIND,
KNOWING YOUR PRODUCT IS BEING GIVEN THE EXPERT ATTENTION OF PHILIPS’ FACTORY SERVICE.
COMMENT OBTENIR NOTRE SERVICE APRES VENTE RAPIDE ET EFFICACE SOIT PAR COURRIER, A DOMICILE, OU EN SE PRESENTANT A UN CENTRE DE SERVICE PHILIPS. PLUS DE 600 CENTRES DE
RECEPTION DE PRODUITS A REPARER A TRAVERS LE PAYS: CONTACTER LE CENTRE DE SERVICE AUX CONSOMMATEURS LE PLUS PROCHE POUR SAVOIR L'EMPLACEMENT DE CES DEPOTS DANS
UN RAYON DE 50 A 75 MILES (80 KM A 120 KM) DU CENTRE DE SERVICE LOCAL.
CÓMO OBTENER UN SERVICIO OPORTUNO Y EFICIENTE POR CORREO, EN CASA O EN PERSONA PARA SU PRODUCTO A TRAVES DE UN CENTRO PHILIPS DE SERVICIO. MAS DE 600 SITIOS POR
TODO EL PAIS PARA LA RECEPCION DE PRODUCTOS NECESITADOS DE REPARACIONES: COMUNICARSE CON EL CENTRO DE SERVICIO DE FABRICA MAS CERCANO PARA ESTOS LUGARES DENTRO
DE UN RADIO DE 80 A 120 KM (50 A 75 MILLAS) DEL CENTRO DE SERVICIO LOCAL,
ATLANTA CLEVELAND CHICAGO
Philips Factory Service Philips Factory Service Philips Factory Service
550 Franklin Road., Suite F 950 Keynote Circle 1279 W. Hamilton Pkwy.
Marietta, GA 30067 Brooklyn Heights, OH 44131 Itasca, IL 60143
800-273-1501 800-331-7037 800-531-2922
TAMPA DETROIT KNOXVILLE
Philips Factory Service Philips Factory Service Philips Factory Service
1911 US Highway 301 North 25173 Dequindre 6700 D Papermill Rd.
Tampa, FL 33619 Madison Heights, MI 48071 Knoxville, TN 37919
800-442-2027 800-438-1398 800-821-1767
SAN FRANCISCO DALLAS PHILADELPHIA
Philips Factory Service Philips Factory Service Philips Factory Service
681 East Brokaw Rd. 415 N. Main Street, #107 352 Dunks Ferry Rd.
San Jose, CA 95112 Euless, TX 76040 Bensalem, PA 19020
800-300-9013 800-952-3254 800-847-9320
HOUSTON
Philips Factory Service
1110 N. Post Oak Rd., Suite 100
Houston, TX 77055
800-952-3254
MAC2929 1/1/2002
39
LIMITED WARRANTY
COLORTELEVISION
90 Days Free Labor
One Year Free Replacement of Parts (Two Years Free Replacement on Color Picture Tube)
This product can be repaired in-home.
WHO ISCOVERED?
You must have proof of purchase to receive warranty service. À sales
receipt or other document showing that you purchased the product is
considered proof of purchase.
WHAT ISCOVERED?
Warranty coverage begins the day you buy you product. Far 90 days
thereafter, all parts will be repaired or replaced free, and labor is free.
From 90 days to one year from the day of purchase, all parts will be
repaired or replaced free, but you pay for all labor charges From one
to two years from the day of purchase, you pay for the replacement or
repair of all parts except the picture tube, and for all labor charges
After two years from the day of purchase, you pay for the replacement
or repair of all parts, and for all labor charges.
All parts, including repaired and replaced parts, are covered only for
the orignal warranty period. W hen the warranty on the product
expires, the warranty on al replaced and repaired parts also expires
WHAT ISEXCLUDED?
Your warranty does not cover:
* labor charges for installation or setup of the product, adjustment of
customer controls on the product, and installation or repair of
antenna systems outside of the product.
* product repair ardor part replacement because of misuse, acd-
dent, unauthorized repair or other cause not within the control of
Philips Consumer Hectronics Company.
* reception problems caused by signal conditions or cable or antenna
systems outside the unit.
+ a product that requires modification or adaptation to enable it to
operate in any country other than the country for which it was
designed, manufactured, approved and/or authorized, or repair of
products damaged by these modifications.
* incidental or consequential damages resulting from the product.
(Some states do not allow the exclusion of incidental or consequen-
tial damaces, so the above exclusion may not apply to you This
indudes, but is not limited to, prerecorded material, whether copy-
righted or not copyrighted.)
* a product used for commercial or institutional pur poses
W HERE IS SERVICE AVAILABLE?
Warranty service is avallable in all countries where the product is offi-
dally distributed by Philips Consumer Hectronics Company. In coun-
tries where Philips Consumer Hectronics Company does not distribute
the product, the local Philips service organization will attempt to pro-
vide service (although there may be a delay if the appropriate spare
parts and technical manual(s) are not readily available).
MAKE SURE YOU KEEP...
Please keep your sales receipt or other document showing proof of
purchase. Attach it to this owner’s manual and keep both nearby.
Also keep the original box and packing material in case you need to
return your product.
BEFORE REQUESTING SERVICE...
Please check your owner’s manual before requesting service.
Adjustments of the controls discussed there may save you a service
call.
TO GET WARRANTY SERVICE IN U.S.A,
PUERTO RICO OR U.S. VIRGIN ISLANDS...
Contact a Philips factory service center (see enclosed list) or author-
ized service center to arrange repair.
(In U.SA., Puerto Rico and U.S Virgn Isands, all implied warranties,
including implied warranties of merchantability and fitness for a partic-
ular purpose, are limited in duration to the duration of this express
warranty. But, because some states do not alow limitations on how
long an implied warranty may last, this limitation may not apply to
you.)
FOR WARRANTY COVERAGE IN CANADA...
Note: Product Warranty coverage may vary between countries where
product is distributed by Philips Consumer Hectronics Company. In
order to receive full and specific warranty details for products sold and
serviced in Canada, please contact Philips at:
1-800-661-6162 (from Canada - French Speaking
1-800-531-0039 (English and Spanish Speaking
REMEMBER...
Please record the model and serial numbers found on the product
below. Also, please fill out and mail you warranty registration card
promptly. It will be easier for us to notify you if necessary.
MODEL #
SERIAL #
Philips, P.O. Box 520890, Miami, FL 33152, (402) 536-4171
Printed in U.S.A.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement