PHILIPS PP9701 55PP9701, 60PP9701 projection TV User manual

Below you will find brief information for projection TV PP9701 55PP9701, projection TV PP9701 60PP9701. This user manual helps you to get started with your new Philips TV. The manual covers all the features of the TV, including the setup, picture settings, sound settings, and more. You will also find information on how to use the TV remote and the on-screen menu controls.

PDF Download
Document
Philips Projection TV 55PP9701, 60PP9701 User Manual | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Digital High Definition
  • Dual Tuner PIP
  • APAC
  • Display Format Conversion Modes
  • Universal Remote Control
  • Guide Plus+
  • Picture-In-Picture
  • Parental Control
  • Stereo-TV
  • Surround Sound

Frequently asked questions

Connect your antenna or cable TV signal to the single 75 ohm input plug on the two-way Signal Splitter (optional). Then connect two lengths of RF Coaxial Cable to the two Output plugs on the two-way Signal Splitter (F-type connector on both ends). Connect the twin Output plugs on the Signal Splitter to the ANT A and ANT B inputs on the rear of the TV. Push the round connector end of the RF Coaxial Cable onto the ANT(enna) plug and screw it down tight (if using threaded cables).

Go to the "CHANNEL MEMORY" control in the "FEATURES MENU" and select "START AUTO-PROGRAMMING". The TV will automatically scan for local channels and save them to its memory.

Select "CLOSED CAPTIONING" in the "FEATURES MENU" and choose the desired mode. You can choose to have closed captioning always on, always off, or on only during mute.
Preparing document for printing…
0%