Philips 7819901519 DVD Recorder User`s manual

Add to my manuals
2 Pages

advertisement

Philips 7819901519 DVD Recorder User`s manual | Manualzz

Thank you for purchasing PHILIPS DVD Recorder.

Please follow the step-by-step instructions to connect and set up your new DVD recorder.

Please complete these recommended steps before using your recorder. For more advanced setups and operations, please refer to the

User's Manual. If you encounter any problem setting up or operating this DVD recorder, please refer to the “Troubleshooting” section in the User's Manual before contacting technical support.

1 Connect Antenna or Cable service to RF-IN jack on the unit

using RF cable (see picture below) .

2 Connect DVD Recorder to your TV set using AV cable (see

picture below) .

3 If you have other AV sources you wish to connect to this DVD

recorder, see panel A, B, C below for reference.

4 Attach power cord to the DVD recorder and then connect to

the wall outlet (see picture on the right) .

5 Press POWER key on the remote or front panel to turn on the

DVD recorder.

6 Turn on your TV and switch to proper input.

7 Proceed with Step 3 on the back page

1 Connect Cable Converter/Satellite Receiver to RF-IN jack on

the unit using RF cable (see picture below).

2 Connect DVD Recorder to your TV set using AV cable (see

picture below).

If you need to use a setup box, cable converter or satellite receiver

to receive TV signal, skip channel setup in STEP 3 on the next page.

3 If you have other AV sources you wish to connect to this DVD

recorder, see panel A, B, C below for reference.

4 Attach power cord to the DVD recorder and then connect

to the wall outlet (see picture on the right).

5 Press POWER key on the remote or front panel to turn on

the DVD recorder.

6 Turn on your TV and switch to proper input.

7 Proceed with Step 3 on the back page.

1 Connect VCR to the DVD recorder using AV cable (see picture

below) .

2

1 Connect Camcorder to the DVD recorder using AV cable

(see picture below) .

on.

2 If the DVD recorder is not connected to a TV set, return

to the Connection Guide above to continue connecting

the recorder to TV.

1 Connect DV to the DVD recorder using DV cable (see

picture below) .

2

If the DVD recorder is not connected to a TV set, return to

the Connection Guide above to continue connecting the

recorder to TV.

Note: For advanced connections, please refer to theConnecting Upsection (p.6) in the User’s Manual.

P/N 7819901519

.

1 Press SETUP key on the remote to enter the Setup menu screen.

2 Use the  / key on the remote to highlight “Language” and press

OK key on the remote to select.

3 Use the  / key on the remote to highlight “OSD (On-Screen Display)”

and press OK key to select.

4 Use the  / key on the remote to highlight your desired language and

press OK key on the remote to select.

5 Press SETUP key to exit.

1 Press SETUP key on the remote to enter the Setup menu screen.

2 Use the / to highlight “TV Tuner” and press OK to select.

3 Use the / to highlight an item from the list of options and press

OK to select.

When selecting TV signal, choose:

• “Antenna”, if you are using a standard antenna to receive TV signal.

• “Cable”, if you are using basic cable to receive TV signal.

(For detailed TV signal options, please refer to the “Getting Started” section (p.12)

in the User’s Manual.)

4 Use the / to highlight “Utilities” and press OK to select. Press OK again to start “Scan Channel”.

It will take a few minutes for this DVD recorder to scan for channels provided in your area. You may see the picture change

in the on-screen small window while the system is scanning for channels. Once scanning is completed, the window will be

tuned to the first channel available.

5 Press SETUP to exit.

1

7

Press

2

3

4

5

6

Use the / keys to select “Date/Time” and press

Use the / keys to select “Date” and press

Use the / and the

OK key to confirm.

Use the / keys to select “Time” and press

Use the / and the

AM/PM and press

Press

SETUP key on the remote to enter the Setup menu screen

OK

SETUP key to exit.

/

/

OK

OK

key.

OK key.

key.

keys to set the month, day, year and press keys to set the hour, minute, second and

key to confirm.

DATE/TIME

1 Press OPEN/CLOSE key to open the disc tray. Place the enclosed blank DVD disc on

the disc tray. Press OPEN/CLOSE key to close the disc tray.

It may take a few minutes for the DVD recorder to prepare the disc for recording.

2 Press TOOLS key to display the “TOOLS” menu.

3 Select “Record” and press OK key to confirm.

4 Select a source and press OK key to confirm.

If “TV” is selected, select the channel number and press OK key to confirm.

5 The DVD recorder will automatically detect the disc you have inserted, and suggest

a suitable format for recording. If the suggested format is not what you wish to use,

press  / key to select “Change Disc” and then press OK to confirm.

6 Select a desired recording mode and press OK key to confirm.

HQ - High Quality (1 hr/disc)

SP - Standard Play (2 hrs/disc)

SPP - Standard Play Plus(2.5 hrs/disc)

LP - Long Play (3 hrs/disc)

EP - Extended Play (4 hrs/disc)

SLP - Super Long Play (6 hrs/disc)

7 Press OK key to start recording.

To pause recording, press  PAUSE/STEP key.

To resume recording, press  PAUSE/STEP key orREC key.

To view the status of your recording, press DISPLAY key.

8 To stop recording, press  STOP key.

It may take a few seconds for the DVD recorder to stop the recording.

9 To view what you've recorded, press PLAY key, select the thumbnail for the desired

show and press OK key to confirm.

2.5

SPP (4.7GB ~2.5Hrs)

The “Easy Guider” menu makes features like recording, timer recording and finalizing a snap.

Before you take the disc recorded on this DVD recorder to other players, you must finalize it (except for DVD+RW discs)

1 Press TOOLS to display the “Easy Guider” menu.

2 Select “Disc Tools”, then “Finalize” and press OK key to confirm.

3 Press ENTER key to start finalizing.

• Once you finalize a disc, you cannot add any more recording on the disc.

• Disc finalization may take a few minutes to complete.

• The disc will now play on most DVD playback device.

For more details on supported disc types and file formats, please refer to the

“Overview” section (p.4) in the User's Manual.

1. Refer to “ Troubleshooting section (p.38) in the User’s Manual

2. Check out www.philips.com/support

3. Contact Optimal Customer Care at 0800-231-099

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement