Polaroid 300 Digital Camera User guide

Digital Camera User Guide

www.izone-camera.com

1. Shutter button

2. Flash

3. Viewfinder

4. Power button

5. Lens

6. Self Timer LED

Product Overview

1. Viewfinder

2. Saving LED

3. LCD screen

4. Menu / Left button

5. Down button

6. Flash / Battery charge LED

7. Capture / Playback mode button

8. LCD screen on/off button

9. Up button

10. Set / Right button

11. Reset button

M

SET

/

11

2

Polaroid izone300 Digital Camera User Guide www.izone-camera.com


3

1. USB port

2. SD card slot

1. USB port

2. USB plug

2



Docking Station

3

Table of Contents

1 Getting Started ................................................................................ 7

• Camera Package Contents............................................................ 8

• Attaching the Hand Strap............................................................. 9

• Using the Docking Station............................................................ 9

• Charging the Battery...................................................................10

• Turning the Camera On and Off ...................................................13

• Reset Feature.............................................................................14

• Checking the Battery Power Level................................................14

• How to Navigate Menus ..............................................................15

2 Camera Setting ...............................................................................16

• Checking Camera Status .............................................................16

• Camera Modes ...........................................................................18

• Drive Mode ................................................................................19

• Setup Menu ...............................................................................19

• Formatting the Internal Memory.................................................. 20

• Setting the Current Date and Time ...............................................21

• Auto Power Save Setting ........................................................... 22

• Setting the Beep Sound On/Off ...................................................23

• Setting Frequency ......................................................................23

• Setting Display Language............................................................24

• Setting the Date Stamp On and Off..............................................25

• Resetting to Default Settings.......................................................25

• Switching the Information Display and LCD Screen On and Off.......26

3 Taking Pictures................................................................................27

• Taking a Picture..........................................................................27

• Taking a Picture with the LCD Screen Off .....................................27

• Setting Flash Mode.....................................................................28

• Setting Self-timer ...................................................................... 30

• Zoom Feature.............................................................................31

• Setting the Image Size and Quality ..............................................32

• Setting Exposure Compensation ................................................. 34

• Setting the White Balance for Pictures ........................................ 35

4



5

4


4 Recording Video Clips ..................................................................... 36

• Recording Video Clips ................................................................ 36

• Setting Video Resolution.............................................................37

• Setting the White Balance for Video Clips.................................... 38

5 Reviewing and Managing Pictures and Video Clips............................. 39

• Reviewing the Pictures............................................................... 39

• Reviewing Picture and Video Clip Files in Thumbnail..................... 39

• Auto Play.................................................................................. 40

• Playing the Video Clip .................................................................42

• Protect or Unprotect Picture(s) or Video Clip(s).............................42

• Deleting Picture(s) or Video Clip(s) ............................................. 43

6. Print Settings ................................................................................ 44

• About PictBridge ....................................................................... 44

• DPOF (Digital Print Order Format) ................................................51

7 Using SD (Secure Digital) Card ........................................................ 54

• Using the SD Card ..................................................................... 54

• To Copy Pictures and Video Clips from Internal Memory to a Memory

Card..........................................................................................57

8 Installing the Software onto a Computer........................................... 58

• Installing the Software............................................................... 58

• Software Included with Your Camera .......................................... 60

• Computer System Requirements ..................................................62

9 Transferring Pictures and Video Clips To Your Computer .................... 63

• Before You Transfer Files............................................................ 63

• Changing the Driver Type Between Mass Storage Mode and PC

Camera Mode............................................................................ 63

• Connecting to Your Computer..................................................... 64

• Transferring Pictures and Video Clips .......................................... 65


5

10 Using the Camera as a Web Cam (PC Only)..................................... 66

• Setting up NetMeeting™ ............................................................. 66

• Start NetMeeting™......................................................................67

11 Troubleshooting Problems.............................................................. 68

12 Getting Help..................................................................................71

• Polaroid-digital Online Services....................................................71

• ArcSoft Software Help................................................................71

13 Appendix ......................................................................................72

• Technical Specifications..............................................................72

• Capacity of SD Cards..................................................................75

• Uninstalling Polaroid izone300 driver (PC Only).............................77

• Camera Default Settings .............................................................78

• Using Your Battery .....................................................................79

• Tips, Your Safety & Maintenance.................................................79

• Regulatory Information .............................................................. 80

6



7

1 Getting Started

The izone300 camera has easy-to-use features. It has never been easier or more enjoyable to take digital pictures. Here are a few examples of what you can do with your camera.

• Enjoy point & shoot operation. Adjust the resolution for print or email.

•

•

Store pictures and video clips to the internal memory or a SD card.

Playback of pictures and video clips on the LCD screen or on a computer.

•

•

Send the pictures and video clips over the Internet to family and friends.

Enjoy PictBridge directly plug-and-print experience.

6



7

• Camera Package Contents

izone300

USB Cable

Digital Imaging Products

201 Burlington Road

Bedford, MA 01730-1434

First Class

Postage

Required not deliver without proper postage

Registration Card

PDC iZONE

Quick Start Guide

Guide de Démarrage rapide

Schnellanleitung

Guida Rapida

Guía Rápida de Inicio

Guia de Início Rápido

ML 0405

Part no.: OM837657 R1

Printed in China

Quick Guide

The CD-ROM includes

Polaroid izone300 Camera driver (PC) izone PhotoBase (PC & Mac)

Microsoft NetMeeting (PC)

Adobe Acrobat Reader (PC & Mac)

User Guide (in PDF format)

Docking Station

Pouch Hand Strap AC Adapter

(Optional)

USB Connector

(Optional)

8



9

• Attaching the Hand Strap

• Using the Docking Station

8



9

• Charging the Battery

There are four ways to charge the battery. Please fully charge the battery for four hours before using the camera for the first time after purchase, and about three hours for subsequent recharging.

NOTE:

• It is normal for the camera to be slightly warm while charging the battery.

• Electric current varies for different computers. Some computers may not provide a sufficient charging current. For a full battery charge or when you use the camera away from your computer, we recommend the usage of an AC adapter (DC, 5V, 500mA, optional) to charge the battery. Visit www.izone-camera.com for detailed information on ordering an adapter and USB connector.

• For a full battery charge, we recommend turning off the camera before charging the battery.

• To get the best performance out of the battery, it is recommended the camera be kept charged at all times. Especially when not in use for a period of time, like over a month or so.

• When the camera is connected to a computer, a message may prompt for installing the camera driver. (The message window varies for different

Windows® OS) The battery can be charged without installing the driver. Click

“Cancel” to close the message window. To install the driver, please refer to page 58 “Installing the Software onto a Computer” for further details.

10



11

10


1. Using the USB cable via the computer

• Plug the labelled end of the USB cable into the socket marked

on your computer.

• Plug the other end of the USB cable into the USB port on the camera.

The battery begins charging and the battery charge LED on the camera blinks. The LED stops blinking and remains on when battery is fully charged. izo

USB Series “A” Plug connects to your PC

USB Series “Mini B” Plug connects to your izone300 Camera or Docking Station

2. Using the USB cable via the docking station.

• Place the camera into the docking station. For further details, refer to “Using the Docking Station” on page 9.

• Plug the labelled end of the USB cable into the socket marked

on your computer.

• Plug the other end of the USB cable into the USB port on the docking station.

The battery begins charging and the battery charge LED on the camera blinks. The LED stops blinking and remains on when battery is fully charged.


11

3. Using an AC adapter (optional), via the camera

• Plug the labelled end of the connector into the USB port on the camera.

• Connect the AC adapter with the USB connector.

• Connect the adapter to the household power outlet.


4. Using an AC adapter (optional), via the docking station.

• Place the camera into the docking station. For further details, refer to “Using the Docking Station” on page 9.

• Plug the labelled end of the connector into the USB port on the docking station.

• Connect the AC adapter with the USB connector.

• Connect the adapter to the household power outlet.


The internal battery should last for the life of the camera, but as is the case with all rechargeable batteries the actual charge held may decline with use. Should it ever become necessary to replace the internal battery, please visit www.izone-camera.com for service instructions.

12



13

• Turning the Camera On and Off

To turn on the camera, fully press and hold the Power button until the LCD

Screen is activated. Press and hold the

Power button again and the camera will power off.

NOTE:

• Make sure that the Flash / Battery charge LED remains lighted before shooting.

• The camera is designed with an automatic power-off feature to conserve battery life. After a specified period of inactivity, the camera automatically powers off. Pressing the Power button can deactivate this feature and turn on the camera again.

• An indicator appears if battery power is low. Recharge the battery immediately.

12



13

• Reset Feature

In the rare situation that the camera locks up (usually in a very low power situation), we have incorporated a Reset button on the back of the camera that allows the camera processor to be reset without losing any images.

To use the Reset button, simply depress the Reset button gently

(holding for around 5 seconds) using a paper clip or ball point pen. The camera will power off automatically. It is important to note that the camera probably needs to be recharged immediately in order to avoid locking up again.

M

SET

/

Reset Button

• Checking the Battery Power Level

Check the battery power level before taking pictures.

1. Turn the camera on.

2. Check the battery power level that appears on the LCD screen.

Battery power is full.

Battery power is adequate.

Battery power is low.

Battery power is exhausted.

14



15

14

• How to Navigate Menus

Menus are used to adjust capture and play settings, as well as other camera settings like the date/time and auto power off.

M

M

SET

/

1. Press the

M

button to enter the menu bar.

Press it again to exit.

2. Press the or button to select a menu item.

Press the

SET

button to enter the submenu.

Press the

M

button to return to the menu

D

DRIVE MODE

STILL

VIDEO

3. Press the or setting.

button to select the desired

SETUP

SETUP

FORMAT

DATE/TIME

AUTO OFF

BEEP

FREQUENCY

LANGUAGE

4. Press the

SET

button to confirm.



15

2 Camera Setting

• Checking Camera Status

Turn on the camera, view the camera LCD screen to check which camera settings are active. Those particular features whose icons are not displayed are not activated.

Still Image mode

White Balance

Auto*

Daylight

Cloudy

Tungsten

Fluorescent

Flash Mode

Flash Off

Auto Flash*

Forced On

Capture Mode

Still Image*

Video

Digital Zoom Status

X1.0

Self-timer On

Image Resolution

2048 X 1536*

1600 X 1200

640 X 480

Number of remaining pictures

2048 X 1536

0007

+0.3

Exposure Compensation

Value

Quality

High*

Normal

Low

SD Card Inserted

Battery Level

Full

Adequate

Low

Exhausted

* Default Setting

16



17

16


Video mode

Video Mode

Recording Indicator

White Balance

For Video Clips

Auto*

Daylight

Cloudy

Tungsten

Fluorescent

* Default Setting

Playback Mode

Picture

Looked File

Time

Date

File Number

2

640 X 480

00:00:28

1600 x 1 200

07:55

08/10/04

0024-0023

Video Clip

Play

Pause

07:55

08/10/04

0024-0023


02:10

Resolution

640 X 480*

320 X 240

Remaining Time

Histogram

Video Length

17

• Camera Modes

The camera has two working modes,

Capture mode and Playback mode. You can switch between them by pressing the Capture/Playback mode button at the back of the camera.

M

SET

/

Capture Mode

Under this mode, you can select the image and video settings according to shooting preference, and take pictures and video clips under the settings you have selected. For more details, please refer to “Taking

Pictures” on page 27 and “Recording Video Clips” on page 36.

Playback Mode

This mode allows the review or deletion of pictures and video clips from the camera. For more details, please refer to “Reviewing and Managing

Pictures and Video Clips” on page 39.

18



19

18


• Drive Mode

The camera has two modes for taking pictures and video clips.

Still Image Mode

Video Mode

You may switch between these two modes according to the following steps.

1. Set the camera to Capture mode .

2. Press the

M

button.

3. Press the or button to select (DRIVE

MODE).

D

DRIVE MODE

STILL

VIDEO

4. Press the

SET

button.

5. Press he or button to select the desired drive mode.

6. Press the

SET

button.

NOTE:

• Still Image mode is the default capture mode.

• This setting is also available in Video mode.

• Setup Menu

Setup menu can be accessed in both Still Image and Video modes.

1. Set the camera to Still Image mode.

2. Press the

M

button.

3. Press the or button to select

SETUP

(SETUP).

4. Press the

SET

button.

5. Press the or button to select the desired setting.

SETUP

FORMAT

DATE/TIME

AUTO OFF

BEEP

FREQUENCY

LANGUAGE


19

• Formatting the Internal Memory

Formatting the internal memory deletes all data stored in it.


SETUP

2. Access the Setup menu.

3. Press the or button to select “FORMAT”.

4. Press the

SET

button.

FORMAT

DATE/ TIME

AUTO OFF

BEEP

FREQUENCY

: SET


6. Press the

SET

button.

REALLY WANT TO

FORMAT?

FORMAT CANCEL

NOTE:

OK

• Data deleted by a format operation cannot be recovered. Make sure you do not have any useful data currently stored in the internal memory before you format it.

• Formatting the internal memory destroys all the pictures, even those that are protected.

• With a memory card inserted, the above operation would format the inserted memory card only. The internal memory will not be formatted when a memory card is inserted.

20



21

20


• Setting the Current Date and Time



3. Press the or button to select “DATE/TIME”.

4. Press the

SET

button.

Setting the date format

5. Press the or button to select “DATE

FORMAT”.

6. Press the

SET

button.

SETUP

FORMAT

DATE/TIME

AUTO OFF

BEEP

FREQUENCY

: SET

DATE/TIME

SETUP

DATE FORMAT


8. Press the

SET

button.

: SET

DATE FORMAT

DD/MM/YY

MM/DD/YY

YY/MM/DD

: SET

DATE/TIME

SETUP

DATE FORMAT

Setting the date and time

5. Press the or button to select “SETUP”.

6. Press the

SET

button.

7. Press the or button to adjust the value in the field.

8. Press the

M

button to switch to the next field.

9. Press the

SET

button.

: SET

SETUP

DD/MM/YY

00 /00/00

00:00:00

EXIT

: SET


21

• Auto Power Save Setting

The camera performs the following power save operations to conserve battery power.

OFF

1/3/5 MIN

The power save feature is not activated.

The camera is designed to switch off automatically to save battery life after the specified period of inactivity.

You can change the power save setting according to the following steps:


SETUP


3. Press the or button to select “AUTO OFF”.

4. Press the

SET

button.

FORMAT

DATE/TIME

AUTO OFF

BEEP

FREQUENCY

: SET


6. Press the

SET

button.

AUTO OFF

OFF

1 MIN

3 MIN

5 MIN

conditions.

- While an auto play is undergoing.

: SET

NOTE:

• Auto power off is automatically disabled under any one of the following

- While the camera’s USB port is connected to a computer or other external devices, or while the camera is being controlled by an external device.

• The LCD screen automatically goes to hibernation after one minute of inactivity. Press any button, except the Power button, to re-activate the

LCD screen.

22



23

22


• Setting the Beep Sound On/Off

You can turn the beep sound on and off. When the beep sound is turned on, the camera will beep when you press the buttons.



3. Press the or button to select “BEEP”.

4. Press the

SET

button.

SETUP

FORMAT

DATE/TIME

AUTO OFF

BEEP

FREQUENCY

: SET


6. Press the

SET

button.

BEEP

ON

OFF

: SET

• Setting Frequency

In order to take a better indoor picture, the camera needs to be set to suit the correct lighting frequency. Set the frequency to 60Hz for US and 50Hz for Europe.


SETUP



“FREQUENCY”.

4. Press the

SET

button.

FORMAT

DATE/TIME

AUTO OFF

BEEP

FREQUENCY

: SELECT : SET


6. Press the

SET

button.

FREQUENCY

50 Hz

60 hz


: SET

23

• Setting Display Language

Under this setting, you can select the language you prefer for the LCD screen.



3. Press the or button to select “LANGUAGE”.

4. Press the

SET

button.

SETUP

DATE/TIME

AUTO OFF

BEEP

FREQUENCY

LANGUAGE

: SET


6. Press the

SET

button.

LANGUAGE

ENGLISH

DEUTSCH

FRANÇAIS

ESPAÑOL

ITALIANO

: SET

24



25

24


• Setting the Date Stamp On and Off

Use the date stamp to imprint the date on your pictures.



3. Press the or button to select “DATE

STAMP”.

4. Press the

SET

button.

SETUP

AUTO OFF

BEEP

FREQUENCY

LANGUAGE

DATE STAMP

: SET


6. Press the

SET

button.

DATE STAMP

ON

OFF

NOTE:

This setting is configured for images only.

: SET

• Resetting to Default Settings

You can easily change all the settings you made back to the camera default settings by the following steps.

Please refer to “Camera Default Settings” on page 78 for more details.


SETUP


3. Press the or button to select “DEFAULT”.

4. Press the

SET

button.

FREQUENCY

LANGUAGE

DATE STAMP

TWAIN DRIVER

DEFAULT

: SET


6. Press the

SET

button.

DEFAULT SETTING?

NO

YES


OK

25

• Switching the Information Display and LCD Screen On and Off

Pressing the button each time switches the LCD screen to the next display mode in the following sequence.

Capture mode

2048 X 1536

10

Press

2048 X 1536

10

Press

H H

X0.1

X0.1

Press Press

Playback mode

2048 X 1536

07:55

08/10/04

0024-0023

Press

07:55

08/10/04

0024-0023

Press

Press

26



27

26


3 Taking Pictures

Before you take pictures, please read this note first:

Outdoor Pictures Without the Flash

• Avoid intense sunlight that may cause sun spots in pictures.

• Always make sure that the sun or other light source is in front of the subject.

• Taking a Picture

Taking pictures at approximately 3.2 feet to infinity (1 metre to infinity).


2. Frame your subject using the LCD screen or the viewfinder.

3. Hold the camera steady. Press the shutter button completely down to take a picture. A beep will sound (if the beep sound is turned on) when a picture is taken.

NOTE:

Make sure that the Flash / Battery charge LED remains lighted before shooting.

• Taking a Picture with the LCD Screen Off

You can also take a picture with the LCD screen off. The procedure is the same as above but frame your subject using the viewfinder instead.


27

• Setting Flash Mode


2. Pressing the Flash button cycles through the flash modes in the following sequence.

When you press the Flash button, the icon (according to the flash setting you selected) will appear on the LCD screen. You can now take pictures using the flash mode you have selected. The flash will recharge after each flashed picture.

The flash range is approximately 3.2 feet to 4.9 feet (1 to 1.5 metres).

28



29

The camera has three flash modes (default setting is Auto Flash). Use the flash when you take pictures at night, indoors, or outdoors in heavy shadows.

When shooting under these conditions:

The flash does not fire. Use this setting for outdoor pictures, or where flash is prohibited or may be distracting, or when shooting towards a reflective surface, such as a window or a mirror.

If there is not enough light when using this setting, your pictures may turn out dark.

The flash fires automatically as needed. Use this setting to take most pictures.

The flash fires for every picture. Use this setting in high-contrast situations to provide fill-light or use it indoors in low light.

Select this mode

Flash Off

Auto Flash

Forced On

Icon shown on the LCD screen

NOTE:

• Flash modes are not available in Video mode.

• Never touch or block the flash with your fingers. Doing so can soil these components and interfere with the correct flash operation.

28



29

• Setting Self-timer

Your camera is designed with a self-timer function, which allows you to take pictures with a 10-second built-in timer.

SELF TIMER


2. Press the

M

button.

3. Press the or

TIMER).

button to select (SELF

4. Press the

SET

button.

ON

OFF


6. Press the

SET

button.

SELF TIMER

ON

OFF

7. The icon will appear on the LCD screen.

NOTE:

To disable the self-timer function, repeat the above steps and select “OFF”.

: SET

2048 X 1536

10

+1.5

H

8. Frame your subject using the LCD screen or the viewfinder.

9. Press the shutter button to take a picture. The camera beeps (if the beep sound is turned on) and the Self-timer LED blinks.

NOTE:

Place the camera on a flat surface or use a tripod when using the self-timer function.

30



31

30

• Zoom Feature

Your camera is designed with 3X digital zoom. This feature lets you zoom in on the central area of a photo and photograph only the enlarged portion of the picture.

1. Set the camera to Capture mode .

2. Press the button to zoom in. Press the zoom factor is shown on the LCD screen.

button to zoom out. The

2048 X 1536

10

+1.5

H

M

Digital Zoom Factor

For the digital zoom feature, the viewfinder does not reflect the actual zoomed image. We recommend the user to use the LCD screen to monitor the zoom factor.

NOTE:

You may notice a decrease in image quality when using the digital zoom.



31

• Setting the Image Size and Quality

Picture resolution refers to the number of pixels in a digital picture.

Picture quality depends on the JPEG file compression that the camera applies when the picture is taken. Higher resolution and less compression produces better quality but occupies more memory space. Smaller size pictures and normal quality are easier to email while larger size and fine quality are better for printing.

Image Size Setting


2. Press the

M

button.

3. Press the or button to select (IMAGE

SIZE).

4. Press the

SET

button.

D

IMAGE SIZE

2048 X 1536

1600 X 1200

640 X 480


6. Press the

SET

button.

D

IMAGE SIZE

2048 X 1536

1600 X 1200

640 X 480

Quality Setting


2. Press the

M

button.

3. Press the or button to select (QUALITY).

4. Press the

SET

button.

D

: SELECT

QUALITY

HIGH

NORMAL

LOW

: SET


6. Press the

SET

button.

D

QUALITY

HIGH

NORMAL

LOW

32



33

The chart below indicates the approximate numbers of pictures you can expect the camera to hold at each setting based on the 16 MB internal memory. You can expand the memory with SD card, please refer to

“Capacity of SD Card” on page 75 for further details.

Quality

Image Size

2048 x 1536 pixels

1600 x 1200 pixels

640 x 480 pixels

High

18

31

127

Normal

28

45

145

Low

28

48

149

NOTE:

• Scene complexity affects a picture’s file size. For example, a picture of trees in autumn has a larger file size than a picture of blue sky at the same resolution and quality setting. Therefore, the number of pictures you can store on the camera’s internal memory may vary. The number of pictures on the LCD screen is for reference only.

• It is recommended to use the 2048 x 1536 resolution for printing.

32



33

• Setting Exposure Compensation

You can adjust the exposure compensation value (EV) within the range of

-1.5EV to +1.5EV in order to compensate for current lighting conditions.

This setting can be used to obtain better result when shooting with backlighting, indirect indoor lighting, a dark background, etc.


2. Press the

M

button.


(EXPOSURE).

4. Press the

SET

button.

D

EXPOSURE

AUTO


6. Press the

SET

button.

D

EXPOSURE

+0.3

NOTE:

• A higher EV value is best used for light-coloured subjects and backlit

: SET

subjects. A lower EV value is best for dark-coloured subjects and for shooting outdoors on a clear day.

• When shooting under very dark or very bright conditions, you may not be able to obtain satisfactory results even after performing exposure compensation.

34



35

34


• Setting the White Balance for Pictures

Selecting the right type of white balance can help to make the colour of a subject in a picture appear more natural under the type of lighting that is available.


2. Press the

M

button.

3. Press the or button to select (WHITE

BALANCE).

4. Press the

SET

button.

WHITE BALANCE

AUTO

DAYLIGHT

CLOUDY

TUNGSTEN

FLUORESCENT


6. Press the

SET

button.

WHITE BALANCE

AUTO

DAYLIGHT

CLOUDY

TUNGSTEN

FLUORESCENT

When shooting under these conditions:

Automatic adjustment

Outdoor daylight

Cloudy

Indoors, illuminated by tungsten lighting

Indoors, illuminated by fluorescent lighting

Select this setting


35

4 Recording Video Clips

NOTE:

Change the drive mode from Still Image mode to Video mode before recording video clips, since Still Image mode is the default capture mode. Please refer to “Drive Mode” on page 19 for more details.

• Recording Video Clips

Use the Video mode to record video clips. The recording time displayed on the LCD screen will decrease and the icon will blink while recording.

1. Set the camera to Video mode.

2. Frame your subject using the LCD screen.

3. Press the shutter button completely down to start recording.

4. Press the shutter button again to stop recording. Recording stops when the current memory is full.

Recording Indicator

640 X 480

00:12:58

36



37

36

• Setting Video Resolution

Video resolution refers to the number of pixels in a digital video clip.

Video clip quality depends on the file resolution that the camera applies when the video clip is recorded. Higher resolution makes better quality which occupies more memory space.


2. Press the

M

button.

3. Press the or button to select (IMAGE

SIZE).

4. Press the

SET

button.

D

SETUP

IMAGE SIZE

640 X 480

320 X 240


6. Press the

SET

button.

D

IMAGE SIZE

640 X 480

320 X 240

SETUP

Here are the approximate length of video clips you can expect the camera to hold at each setting based on the 16 MB internal memory.

You can expand the memory with a SD card.

Resolution: 640 x 480 Approx. 1.4 minutes (10 fps)

320 x 240 Approx. 1.5 minutes (15 fps)



37

• Setting the White Balance for Video Clips

Selecting the right type of white balance can help to make the colour of a subject in the video clip appear more natural under the type of lighting that is available.

WHITE BALANCE


2. Press the

M

button.

3. Press the or button to select (WHITE

BALANCE).

4. Press the

SET

button.

D

SETUP

AUTO

DAYLIGHT

CLOUDY

TUNGSTEN

FLUORESCENT


6. Press the

SET

button.

WHITE BALANCE

D

SETUP

AUTO

DAYLIGHT

CLOUDY

TUNGSTEN

FLUORESCENT

Select this setting When shooting under these conditions:

Automatic adjustment

Outdoor daylight

Cloudy

Indoors, illuminated by tungsten lighting

Indoors, illuminated by fluorescent lighting

38



39

38

5 Reviewing and Managing Pictures and Video Clips

NOTE:

Change the camera mode from Capture mode to Playback mode before reviewing pictures and video clips. Please refer to “Camera Mode” on page

19 for more details.

• Reviewing the Pictures

1. Set the camera to Playback mode.

2. Use the or button to view the pictures taken.

The icon is shown on the LCD screen when a picture is selected.

• Reviewing Picture and Video Clip Files in Thumbnail

You can view up to 9 picture and video clip files at a time on the LCD screen by using the Thumbnail function.


2. Press the button twice. Thumbnail files will be shown on the LCD screen and the last reviewed picture will be highlighted.

3. Press the , ,

M

and

SET

button to select a thumbnail file and view it in full screen by pressing the button.


M

SET

/


39

• Auto Play

The Auto Play function enables you to view all the picture and video clip files stored in the camera one by one forward or backward on the

LCD screen.

You can activate the Auto Play function and make Auto Play direction and interval according to the following steps.


2. Press the

M

button.

3. Press the or button to select (AUTO

PLAY).

4. Press the

SET

button.

AUTO PLAY

ON

SETUP

: SET

5. Press the or button to select “SETUP”.

6. Press the

SET

button.

AUTO PLAY

ON

SETUP

Set Auto Play Direction


“DIRECTION”.

8. Press the

SET

button.

9. Press the or button to select the desired

40

setting.

10. Press the

SET

button.

: SET

AUTO PLAY

DIRECTION

INTERVAL

DIRECTION

BACKWARD

FORWARD

: SET

: SET



41

40

Setting Auto Play Interval

7. Press the or button to select “INTERVAL”.

8. Press the

9. Press the setting.

SET

button.

or button to select the desired

10. Press the

SET

button.

AUTO PLAY

DIRECTION

INTERVAL

INTERVAL

1 SEC

10 SEC

: SET

: SET

Start Auto Play

Perform steps 1, 2, 3 and 4 on page 40.

5. Press the or button to select “ON”.

6. Press the

SET

button.

AUTO PLAY

ON

SETUP

: SET

The camera will automatically run from the last file that you have reviewed. Every file will display according to your interval setting. You may press the or button to stop the auto play. The auto play will keep running as long as there is power.



41

• Playing the Video Clip


2. Press the or button to select the video clip you want to play.

3. Press the

SET

button to start playing video clip. Press it again to pause.

4. Press the button to stop.

08:54

04/10/03

0006 - 0006

640 X 480

00:12:32

The icon is shown on LCD screen when a video clip is selected.

• Protect or Unprotect Picture(s) or Video Clip(s)


2. Press the

M

button.


(PROTECT).

4. Press the

SET

button.

PROTECT

LOCK THIS

UNLOCK THIS

LOCK ALL

UNLOCK ALL


6. Press the

SET

button.

PROTECT

LOCK THIS

UNLOCK THIS

LOCK ALL

UNLOCK ALL

: SET

LOCK THIS

Protect the selected picture or video clip

UNLOCK THIS Remove protection from the selected picture or video clip

Protect all pictures and video clips in the current LOCK ALL memory

UNLOCK ALL Remove protection from all of the pictures and video clips

42



43

42


Once the images or video clips are protected, an icon will appear on the LCD screen, indicating it is locked when you review it.

NOTE:

To protect one picture or video clip or to remove protection from one picture or video clip, use the or button to choose the selection you want to protect or unprotect before the above operation.

• Deleting Picture(s) or Video Clip(s)


2. Press the

M

button.

3. Press the or button to select (ERASE).

4. Press the

SET

button.


6. Press the

SET

button.

ERASE

ERASE THIS

ERASE ALL


8. Press the

SET

button.

You can cancel the deletion by choosing “NO”.

ERASE THIS ?

NO

YES

: SET

NOTE:

• To delete one picture or video clip, use the or button to select the one you want to delete before the above operation.

• Protected file can not be deleted. Remove protection before deleting.

• All deleted pictures and video clips can not be recovered.


43

6 Print Settings

• About PictBridge

PictBridge is a new industry standard that allows you to print images directly from a PictBridge enable digital still camera to a PictBridge compatible printer without using a photo editing software or a computer.

Printing Procedures

1. Preparing the camera and the printer.

Camera

Printer

Be sure battery level is full before printing.

Refer to the user guide that comes with your printer and make preparations (paper, ink cassette, cartridge, etc.) as required.

Turn on the camera and the printer.

2. Selecting PictBridge mode

Set the camera to Playback mode and select the PictBridge mode.

Refer to page 45 for details.

3. Connecting the camera to the printer

Refer to "Camera/Printer Connection" on page 46 for details.

4. Select print settings.

Use the camera's function and navigation buttons to select the print settings. Refer to page 47 for details.

5. Printing

Select “PRINT” and press the

SET

button to start printing. Refer to page 50 for details.

44



45

44


Cancelling Printing

Press the

SET

button to cancel printing the print job. The printer will stop printing and eject the paper.

Printing Errors

If for some reason an error occurs during or before printing, select “CANCEL” or

“CONTINUE” and then press the

SET

button.

NOTE:

• Please refer to the printer’s user guide for the solutions. Printing may resume once the problem is solved.

• Printing operation may still fail with some errors even if you press the

SET

button after selecting

“CONTINUE”. In that case, select “CANCEL” and press the

SET

button.

Selecting PictBridge Mode


2. Press the

M

button.

3. Press the or button to select (PRINT

SETTING).

4. Press the

SET

button.


“PICTBRIDGE”.

6. Press the

SET

button.

NOTE:

To print a single image, select the image before enabling PictBridge mode.


PRINT SETTING

PROGRESS 001/002

PRINTED 000

CANCEL

: SET

PRINT SETTING

ERRORS

CANCEL

CONTINUE

: SET

PRINT SETTING

PICTBRIDGE

DPOF

PRINT SETTING

PICTBRIDGE

DPOF

PLEASE

CONNECT TO DEVICE

45

Camera/Printer Connection

Connecting with the USB Cable.

1. Plug Series A of the USB cable into the marked socket on your printer. Location of USB socket will vary from printer to printer.

2. Plug Series Mini B of the USB cable into the port on your camera.

NOTE:

• “ DEVICE IS CONNECTED” displays on the LCD screen, indicating a proper connection to the printer.

• Do not connect the USB cable to the camera until

PictBridge is enable and when prompted by the

“PLEASE CONNECT TO DEVICE” screen. Or if you already have connected the cable to the camera, do not plug into printer until prompt to do so. Not

DEVICE IS

CONNECTED

following this sequence will result in connection failure.

• When “PLEASE CONNECT TO DEVICE” is displayed for about ten seconds, it will skip to the PictBridge print setting screen even if there is no connection between camera and printer.

46



47

46


Selecting Print Settings

1. Press the or button to select the print mode.

PICTBRIDGE

THIS IMAGE

ALL IMAGES

ALL INDEX

ALL IMAGES

ALL INDEX

: SET

2. The following options are available.

THIS IMAGE

Print the selected image in the camera’s internal memory or a memory card according to specified settings. Use the UP or DOWN button to designate the image you want to print before selecting the

PictBridge mode.

Print all images in the camera’s internal memory or a memory card according to the specified settings.

All images in the camera’s internal memory or a memory card are given an index and printed according to the specified settings.

NOTE:

• To print a single image, select the image before enabling PictBridge.

• Print settings are configured for images only. Make sure there are no video clips or other file besides images in the memory before printing, otherwise, an error will occur if trying to print using the “ALL IMAGES” or “ALL

INDEX” option.

• Not all printers will support all these print options. Please refer to the printer user guide for options available.


47

3. Press the

SET

button to select the print settings.

NO. OF COPY

0 1

1

DEFAULT

DEFAULT

DEFAULT

Number of Copies

Print Layout

File Name On/Off

Date Stamp On/Off

Paper Size

Select a setting item using the or button and select setting contents using the

M

or

SET

button.

NOTE:

“PRINTER SETTING NOT SUPPORTED” may appear on the LCD screen after selecting a particular setting.

The camera’s print settings are not supported by the printer. In this case, select “DEFAULT” for this particular setting, or visit http://www.izone-camera.com for possible solutions.

Specifying the Number of Copies

1. Press the or button to select (NO. OF

COPY).

2. Press the

M

or

SET

button to specify the number of copies (from 1 to 99) you want to print for the selected image or all images.

NOTE:

“01” is the default setting.

PRINTER SETTING

NOT SUPPORTED

NO. OF COPY

0 1

DEFAULT

DEFAULT

DEFAULT

DEFAULT

48



49

48


Selecting Print Layout

1. Press the or button to select (N-UP

LAYOUT).

2. Press the

M

or

SET

button to specify the number of printed images on a page.

N-UP LAYOUT

0 1

1

DEFAULT

DEFAULT

DEFAULT

DEFAULT

1/2/4/6/8

Print settings differ according to the printer model.

Print 1/2/4/6/8 on a page.

BORDERLESS Print right to the edge of the page.

Setting the File Name On/Off

1. Press the or button to select (FILE NAME).

2. Press the

M

or

SET

button to select

“DEFAULT”, “ON” or “OFF”.

FILE NAME

0 1

1

DEFAULT

DEFAULT

DEFAULT

DEFAULT Print settings differ according to the printer model.

ON

OFF

Add the file name to the printed image.

Print without the file name.

Setting the Date Stamp On/Off

1. Press the UP or DOWN button to select (DATE

STAMPING).

2. Press the

M

or

SET

button to select

“DEFAULT”, “ON” or “OFF”.

DATE STAMPING

0 1

1

DEFAULT

DEFAULT

DEFAULT


ON

OFF

Add the date stamp to the printed image.

Print without the date stamp.


49

Selecting Paper Size

1. Press the or button to select “SIZE”.

2. Press the

M

or

SET

button to select the paper size.

The following paper sizes are available:

8” x 10”, 4” x 6”, A4 and default.

SIZE

0 1

1

DEFAULT

DEFAULT

4 X 6


Printing

1. Press the or button to select “PRNIT”.

2. Press the

SET

button.

NOTE:

To return to the normal playback mode, press the or button to select

“EXIT” and press the SET button.

50



51

50


• DPOF (Digital Print Order Format)

”DPOF” stands for “Digital Print Order Format”, which is a format for recording on a memory card or other medium which captured images and how many copies should be printed. Then you can print on a DPOFcompatible printer or at a professional print service from the memory card in accordance with the file name and number of copies settings recorded on the card.

With this camera, you should always select images by viewing them on the LCD screen. Do not specify images by file name without viewing the file contents.

NOTE:

Print settings are configured for images only. Make sure there are no video clips or other file besides images in the memory before printing, otherwise, an error will occur if trying to print using the “ALL IMAGES” option.

1. Insert an SD card into the camera.

2. Turn on the camera.


4. Press the

M

button.

5. Press the or button to select (PRINT

SETTING).

6. Press the

SET

button.

PRINT SETTING

PICTBRIDGE

DPOF

7. Press the or button to select “DPOF”.

8. Press the

SET

button.

PRINT SETTING

PICTBRIDGE

DPOF


51


10. Press the

SET

button.

PRINT SETTING

THIS IMAGE

ALL IMAGES

: SET

THIS IMAGE The selected picture in a memory card will be printed up to 99 copies.

ALL IMAGES All pictures in a memory card will be printed up to 99 copies for each picture.

NOTE:

To print a single image, select the image before enabling DPOF mode.

PRINT SETTING


12. Press the

SET

button.

PRINT 01 COPIES

: SET

52



53

13. Remove the memory card from the camera and insert it into the printer’s card slot (as illustrated). Location of the card slot may vary from printer to printer model.

NOTE:

Make sure you turn off the camera before inserting or removing a memory card.

14. Press the Print button on the printer to start printing.

Gently push the SD card inwards and release it for the SD card to eject from the SD card slot.

52



53

7 Using the SD (Secure Digital) Card

• Using the SD Card

Your camera comes with a 16 MB built-in flash memory for storing pictures and video clips. You can expand the memory using a commercially available SD card (up to 1GB). The camera senses whether a memory card is inserted, and automatically saves pictures and video clips accordingly. Note that you cannot save pictures or video clips to the built-in flash memory while a memory card is installed in the camera.

Memory Card Precautions

1. Use only an SD memory card with this camera.

2. Electrostatic charge, electrical noise, and other phenomena can cause data corruption or even loss. Always make sure that you always back up important data on other media (MO disc, computer hard drive, etc.).

3. If a memory card starts to behave abnormally, you can restore normal operation by reformatting it. However, we recommend that you always take along more than one memory card whenever using the camera far away from the home or office.

4. We recommend that you format a memory card before using it for the first time after purchasing it, or whenever the card you are using seems to be the cause of abnormal pictures. Remember to format a memory card if it was used in another digital camera or other devices.

54



55

54


IMPORTANT!

• Make sure you turn off the camera before inserting or removing a memory card.

• Be sure to orient the card correctly when inserting it. Never try to force a memory card into the slot when you feel resistance.

• SD memory cards have a write protection switch that you can use to protect files from accidental deletion. However, you must remove the write protection whenever you want to record new files onto it, format it, or delete its files.

• Files contained in the SD card recorded by other cameras may conflict

with the izone300 camera, and valuable data in your existing SD card may be distorted or lost when the card is inserted in the izone300 camera. We strongly recommend the user to use a NEW or formatted SD card for the izone300 camera. The manufacturer is not liable for losing or corrupting any valuable data or files in your SD card due to your improper operation.

Inserting the SD Card

Turn off the camera. Insert the SD card and ensure the card is inserted correctly as illustrated.

The icon will appear on the LCD screen when a SD card is inserted into the camera.

Removing the SD Card

To remove the SD card, turn off your camera and gently push the SD card inwards. And then release it for the SD card to eject from the SD card slot.


55

IMPORTANT!

• Never insert any other object into the camera’s SD card slot. Doing so creates the risk of damage to the camera and card.

• Should water or any foreign objects ever get into the card slot, immediately turn off the camera, remove the batteries and contact your dealer or nearest service provider.

• Never remove a card from the camera while the camera is powered on.

Doing so can cause the recording operation to fail, and even damage the memory card.

Formatting the SD Card

Formatting the SD card erases all files stored in it, including the protected ones. Removing the SD card during formatting may damage the card.

1. Insert an SD card into the camera card slot.


3. Procedures are the same as for formatting the internal memory.

Refer to “Formatting the Internal Memory” on page 20 for details.

IMPORTANT!

• You can format a memory card on the camera or on a computer. However formatting a memory card on a computer takes much longer.

• Note that the data deleted by a format operation cannot be recovered.

Make sure you do not have any useful data currently stored on a memory card before you format it.

56



57

56


• To Copy Pictures and Video Clips from Internal Memory to a

Memory Card

1. Insert an SD card into the camera card slot.



4. Press the

M

button.


CARD).

6. Press the

SET

button.

(COPY TO

COPY TO CARD

COPY

CANCEL

: SET


8. Press the

SET

button.

COPY TO CARD

COPY

CANCEL

: SET

In the above operation, you can exit to the normal Playback mode by choosing “CANCEL” and confirm it. Please note that you cannot copy pictures or video clips from a memory card to the internal memory.

Processing...

NOTE:

The original pictures and video clips will still be in the camera’s internal memory after the copy operation has been performed. You must take the card out before you can erase it.


57

8 Installing the Software onto a Computer

• Installing the Software

For Windows® Users:

PC

IMPORTANT!

• Please backup all the necessary data before any driver and software installation.

• The CD-ROM is tested and recommended to use under English Windows OS.

• Please restart the computer after installing the software.

IMPORTANT! (For Windows® 98SE)

Windows® 98SE needs to install the izone300 camera driver for Mass Storage function. After the installation, please restart the Windows before connecting the camera to the PC.

IMPORTANT!

To experience higher performance in graphics and sound when you’re watching video clips on your PC, it is recommended to install the DirectX ver.

9.0 or above. It can be downloaded from http://www.microsoft.com/directx.

IMPORTANT! (For Windows® Me, 2000, XP)

Directly plug-in the camera to transfer and view the pictures. No need to install the driver.

IMPORTANT!-If the computer requests you to install the Windows® system disk during the software installation, place the Windows® CD into the computer CDROM drive or insert the izone300 driver CD to the CD-ROM drive. If izone300 driver CD is inserted, please set the path to “CD-ROM drive

\software\Driver\Sysfile”. The computer will install the necessary files from the CD automatically. When the software completes installation, close the

Windows® screen. Remove the Windows® CD and store safely.

58



59

58

1. Before you begin, close all other software applications opened on your computer.

2. Insert the CD supplied into the computer

CD-ROM Drive.

3. The CD User Interface Screen will automatically launch.

4. With the mouse, click on each software interface button in turn and follow the on-screen instructions.

Open & Close

NOTE:

If the setup screen does not appear after loading the CD, then you can manually start it by double clicking the “My Computer” icon on your desktop, then double clicking the icon for the CD-ROM drive. When the CD-ROM window opens, double click the “INSTALL-E.EXE” icon.

For Macintosh Users:

Mac

1. Before you begin, close all other software applications opened on your computer.

2. Insert the CD supplied into the computer CD-ROM Drive.

3. Double click the CD-ROM icon “Polaroid”.

4. Install the software included.



59

• Software Included with Your Camera

izone300 Camera Driver

Plug & Play removable disk

Easy to use, just plug the camera to a computer and use it as a removable disk. Use the izone PhotoBase to edit and print the Pictures.

izone PhotoBase

software

- the intelligent software that makes finding your pictures easy!

izone PhotoBase helps you to organize and present multimedia files.

You can quickly and easily create Slide Shows, Web Albums and Video

Postcards. Meanwhile, you can effectively print contact sheets for quick image referencing. The unique “album” structure of the program makes file access convenient. On top of that, you can acquire files from various sources, including digital cameras, scanners, video devices, and removable media.

After you plug-in the camera, the izone PhotoBase software automatically checks to see if you have taken new photos that need to be transferred to your computer. If there are new images, you will be prompted if you want izone PhotoBase to download all the images in the camera to your computer automatically.

With the izone PhotoBase software, you can quickly sort all the photos on your computer either by the date or by image/folder name. Once you have located your images, you can make your simple edits, print or share in no time at all!

60



61

Microsoft® NetMeeting™

Web Cam software

NetMeeting™ provides the most complete conferencing solution for the

Internet and corporate intranet.

Powerful features let you communicate with both audio and video, collaborate on virtually any Windows-based application, exchange graphics on an electronic whiteboard, transfer files, use the text-based chat program, and much more. Using your PC and the Internet, you can now hold face-to-face conversations with friends and family around the world.

Adobe® Acrobat® Reader

.PDF File Reading Software

Adobe® Acrobat® Reader lets you view and print Adobe Portable

Document format (PDF) files on all major computer platforms, as well as fill in and submit Adobe PDF forms online.

60



61

• Computer System Requirements

For acceptable picture transferring and editing performance, we recommend the following minimum requirements;

For Windows® Users

PC

• Compatible with Microsoft® Windows® 98SE, Me, 2000 or XP

• Pentium® III 450MHz or equivalent processor

• 128MB RAM (512MB recommended)

• USB Port

• DirectX 9.0 or higher

• 500MB free disk space

• Colour monitor with high colour (16-bit) graphic capability or higher

• CD-ROM drive

• Standard mouse and keyboard

• Stereo speakers

For Macintosh Users

Mac

• PowerPC® Processor

• Mac™ OS Version 9.2~X

• USB Port

• 96MB RAM (128MB recommended)

• 400MB Free disk space

• Colour monitor with high colour (16-bit) graphic capability or higher

• CD-ROM drive

• Standard mouse and keyboard

• Stereo speakers

62



63

62


9 Transferring Pictures and Video Clips to Your Computer

• Before You Transfer Files

IMPORTANT!

BEFORE YOU CONNECT YOUR DIGITAL CAMERA TO THE COMPUTER, MAKE

SURE THAT YOU HAVE INSTALLED THE SOFTWARE FROM THE ENCLOSED

CD. PLEASE REFER TO “8 Installing the Software Onto a Computer”.

• Changing the Driver Type Between Mass Storage Mode and

PC Camera Mode

You can choose either Mass Storage or PC Camera as a driver type in this camera. Mass storage is the drive type by default. Set the camera to the PC Camera mode when you want to use the PC Camera function.

Mass Storage mode allows the camera to become an external hard disk drive, and you may view and download pictures and video clips stored in your camera’s internal memory or a SD memory card onto your computer. PC Camera mode allows you to take video clips on your computer.

SETUP



3. Press the or button to select “TWAIN

DRIVER”.

4. Press the

SET

button.

BEEP

FREQUENCY

LANGUAGE

DATE STAMP

TWAIN DRIVER

: SET

TWAIN DRIVER


6. Press the

SET

button.

NOTE:

The driver type always resets to Mass Storage when the camera is turned off.

MASS STORAGE

PC CAMERA

: SET


63

For Windows® and Macintosh Users:

• Connecting to Your Computer

Connecting with the USB Cable.

PC Mac

izo

USB Series “A” Plug connects to your PC

USB Series “Mini B” Plug connects to your izone300 Camera or Docking Station


2. Plug Series A of the USB cable into the marked socket on your computer.

3. Plug Series Mini B of the USB cable into the port on your camera or on the docking station.

4. Turn on the camera and an interface “New Hardware Found” will show on the computer desktop.

5. A removable disk drive will be installed onto your computer automatically.

64



65

64


• Transferring Pictures and Video Clips

For Windows® Users:

NOTE:

You can transfer pictures and video clips in any mode.

PC

1. Turn on the camera

2. Connect the camera to a computer via the USB cable.

3. Double click on “My Computer” on your PC desktop and you will see a “Removable Disk” drive.

4. Double click “Removable Disk” -> double click “DCIM”-> double click any directory folder under “DCIM”.

5. All the pictures and video clips are in the directory folder. Highlight the pictures and video clips and drag them to a folder of your choice. You can also create sub-folders to group them or use the

ArcSoft software to edit and manage the pictures or video clips.

For Macintosh Users

Mac

NOTE:

For Mac user, directly plug-in the camera and no need to install the driver.

1. Turn on the camera


3. Connect the camera to a computer via the USB cable, the systems will automatically recognize the MASS STORAGE drive. (System will automatically create a Mass Storage named “Unlablled”)

NOTE:

This Drive name will vary from different version of Mac OS system.

4. Double click the folder “Unlablled” to enter sub-folder “DCIM”.

5. Double click the folder “DCIM” and then any sub folder inside.

6. You can copy the pictures and video clips from this directory folder and paste to the hard disk.


65

10 Using the Camera as a Web Cam

IMPORTANT!

Before using the Web Camera function, make sure that your camera has been switched to PC Camera mode. (Please refer to “Changing the Driver Type Between

Mass Storage Mode and PC Camera Mode” on page 62 for more details.

• Setting up NetMeeting

™

NOTE:

Set the camera to Video Mode before starting NetMeeting™.

1. Connect your izone300 to your computer via the USB cable. Connect the USB cable to a USB port on your PC on the other end.

2. When it is the first time to use the camera as a “Web Cam”. The

Windows may prompt the user to insert the Windows system disk.

Please insert the izone300 driver CD or the Windows CD into the

CD-ROM drive to install the requested files.

3. Put your izone300 on the top of your PC monitor or another flat surface.

4. Connect your microphone (not included) and speakers (not included) to your audio card’s Mic in and line out jack respectively.

66



67

• Start NetMeeting

™

NOTE:

For Windows® XP / 2000 users who use NetMeeting for the first time , go to

Start -> Run ->type in “conf” ->click “OK” and then follow the on-screen set up instruction to set up NetMeeting.

1. Double click the “NetMeeting” icon on the desktop or select the

“NetMeeting” icon from the Windows Start Menu.

2. If you need further help on how to use Microsoft® NetMeeting™, select the “Help” under the menu bar and choose the topic you need. You can also refer to Polaroid “EASY TO USE GUIDE TO MICROSOFT®

NETMEETING™” or visit the website: http://www.microsoft.com/windows/netmeeting.

66



67

11 Troubleshooting Problems

The troubleshooting guide is designed to help you. If problems continue, please contact customer support. Details are provided under

“Getting Help”.

Symptom

I receive an error message when I am installing the

Polaroid izone300 camera driver.

I cannot upload images to my computer.

I cannot run the Polaroid izone300 camera driver”.

My CD Installation wizard does not work.

I get a blurred image when uploading my images to my computer.

Problem

Polaroid izone300 camera driver” does not load.

Connection failure.

Incorrect driver type.

Conflict with another camera driver or capture device.

The auto installation file is switched off or the CD-ROM is disconnected.

There may be a momentary delay between pressing the shutter button and the actual exposure.

Solution

Shut down all other applications and attempt to reinstall the driver.

Check to see if the USB controller in your

BIOS if it is activated. Please refer to

Polaroid website for how to active USB controller in BIOS.

Check all cable connections are secured.

Set the camera’s driver type to the Mass

Storage mode.

If you have another camera installed on your computer, remove it and it’s driver completely from your system to avoid conflicting with your izone300.

Go to the computer desktop. Right click on

“My Computer”. Click “Properties”. Select

“Device Manager”. Double click on “CD-

ROM”, double click on “CD-R (normally the manufacturer’s name. Click on “Settings”.

Ensure both “Auto insert notification” and the “disconnect” are ticked. If you change the settings the computer will ask you to restart your PC. Click “Yes”.

Hold your izone300 camera steady until you hear a beep which indicates the exposure is completed.

68



69

68


Symptom

My izone300 camera hanged and all buttons do not work.

Colour of the playback pictures is different from the picture on the LCD screen during

Pictures are not displayed.

Problem

Your camera may be affected by the electrostatic discharge.

Solution

Depress the Reset button gently

(holding for about 5 seconds) using a paper clip or ball pen.

Recharge the battery. I cannot activate my digital camera by pressing the

Power button.

Image is not recorded when the shutter button is pressed.

Battery is exhausted.

Camera suddenly powers off.

Auto power off function is activated.

Or


Camera is turned off

Or

Flash unit is charging.

Memory is full.

Or

Camera powers off during self-timer countdown.

Recorded pictures are not saved in memory.


Turn the camera on.

Or

Recharge the battery.

Turn the camera on.

Or

Wait until flash unit charging finishes.

Or

Delete images you no longer need, or use another memory card.

Recharge the battery.

Camera powers off before the save operation is complete.

Or

Removing the memory card before the save operation is complete.

If the battery indicator is on the LCD screen, replace batteries with a full set of new ones as soon as possible.

Or

Do not remove the memory card before the save operation is complete.

Position the camera so that sunlight does not shine directly onto the lens.

Sunlight or light from another source is shining directly into the lens during recording.

A memory card with non-DCF pictures recorded with another camera is loaded in the camera.

This camera cannot display non-DCF pictures recorded onto a memory card used by another digital camera.


69

Symptom

I cannot erase pictures.

AVI file cannot be played.

The camera is detected by the

Windows and works properly.

But a drive letter of the

Removable disk is not created.

There is no response from the camera while pressing any buttons.

Problem

All the pictures in memory are protected. Unprotected the pictures you want to delete.

DirectX version is lower than 9.0.

Or

Windows Media player not installed in the computer

Install directx 9.0 or above.

Visit http://www.microsoft.com/ directx for more detail.

Or

Please go to http://www.microsoft.com/windows/ windowsmedia/players.aspx to download the Windows Media Player to play the video clips.

The removable disk crashes with the network drives.

The LCD screen is frozen or the camera is hanged.

Solution

Disconnect the crashed network drive and reserve this drive letter for the camera.

Depress the Reset button gently

(holding for about 5 seconds) using a paper clip or ball pen.

An error message appears on the

LCD screen before or during printing.

Pictures are overexposed or under exposed.

When connect the camera to the PC in Capture mode,

Windows prompt to insert system disk.

Printer may not support some advanced print features.

Or

Some fault occurs with the printer.

Or

Print settings can be configured for images only.

Select “DEFAULT” for a particular print setting or visit http://www.izone-camera.com for the solutions.

Or

Please refer to the printer’s user guide for the solutions.

Or

Make it sure that there is no video clips or other file format in the current memory before printing.

An incorrect flash mode is applied for shooting. Select a correct flash mode for shooting according to the surrounding lighting conditions. izone300 camera driver installation has not completed.

Insert the Windows CD or izone300 driver CD. If izone300 driver CD is inserted, please set the path to CD-

Rom drive\software\Driver\Sysfile .

And continue the installation.

Please also refer to the help files & User Guides that accompany the enclosed applications. For further information and support, please visit our website: http://www.izone-camera.com

70



71

70


12 Getting Help

• Polaroid-digital Online Services

Website: http://www.izone-camera.com

If you have any problem or for any immediate assistance, please phone the hotline, send e-mail to the support email address or write to the address shown on the registration card enclosed.

• ArcSoft Software Help

For North America

ArcSoft HQ Support Centre

(Fremont California, CA)

Tel: 1-800-762-8657

(toll free number)

Fax: 1-510-440-1270

E-mail: [email protected]

For China

ArcSoft China Support Centre (Beijing)

Tel: 8610-6849-1368

Fax: 8610-6849-1367


For Oceania

ArcSoft Australian Support Centre

(Baulkham Hills, New South Wales)

Tel: 61 (2) 9899-5888

Fax: 61 (2) 9899-5728


For South & Central America

Tel: 1-510-979+5520

Fax: 1-510-440-1270

E-mail:[email protected]

For Japan

ArcSoft Japan Support Centre (Tokyo)

Tel: +81-03-3834-5256

Fax: +81-03-5816-4730

Web: http://www.mds2000.co.jp/ arcsoft

E-mail: [email protected] and

[email protected]

For Europe/Middle East/

Africa & Rest of the World

ArcSoft Europe Support Centre

(Ireland)

Tel: +353-(0) 61-702087

Fax: +353-(0) 61-702001


Visit http://www.arcsoft.com for technical support and frequently asked questions (FAQ’s).


71

13 Appendix

• Technical Specifications

Picture

Resolution

• Sensor:

- 1/2.5 inch

- 3.2 Mega Pixels CMOS

• Resolution & Storable Images (based on 16MB internal memory)

Quality

High Normal Low

Image Size

2048 x 1536 pixels

18 28 28

1600 x 1200 pixels

31 45 48

Lens

LCD Screen

640 x 480 pixels

127 145 149

• Type: 5 elements plus IR filter

• Aperture: F 3.5

• Focal Length: 8.66 mm

• Focal Distance

- Normal Focus: 3.2 ft to ∞ (1 m to ∞)

(The focusing range is the distance from the lens surface to the subject.)

• Focus Zones: centre

1.5” TFT colour panel

72



73

72

Built-in

Flash

• Modes

- Auto Flash, Forced On, Flash Off

• Range: 3.2 to 4.9 ft (1 to 1.5 m)

Exposure

Control

Shutter

Speed

White

Balance

Storage

-/+1.5 EV in 0.3 increments

Electronic shutter 1/1000 sec ~ 1/20 sec

Auto, Daylight, Cloudy, Tungsten, Fluorescent

• Internal Memory: 16 MB Nand Flash

• External Memory

- supports SD card up to 1GB (not included)

File Format • Still Image

- EXIF 2.2 compatible format (JPEG compression)

• Video Clip: AVI format

Power

Supply

One lithium ion rechargeable battery (integrated)

Self-timer

10 seconds with beep sound



73

Connectivity With computer via USB cable and docking station

(included)

Dimension • Size: (W) 91 mm x (D) 17 mm x (H) 63.5 mm

• Weight: Approximately 90g (including the integrated battery and excluding card)

Operating

System

• For Windows® Users: Microsoft® Windows® 98SE, Me,

2000 or XP

• For Macintosh Users: Mac OS 9.2~X

74



75

74

• Capacity of SD Cards

32MB

64MB

128MB

256MB

512MB

1GB

SD Card

2048 x 1536 pixels

1600 x 1200 pixels

640 x 480 pixels

2048 x 1536 pixels

1600 x 1200 pixels

640 x 480 pixels

2048 x 1536 pixels

1600 x 1200 pixels

640 x 480 pixels

2048 x 1536 pixels

1600 x 1200 pixels

640 x 480 pixels

2048 x 1536 pixels

1600 x 1200 pixels

640 x 480 pixels

2048 x 1536 pixels

1600 x 1200 pixels

640 x 480 pixels

140

248

936

280

496

1872

560

992

3744

High

Quality

35

62

234

70

124

468

1120

1984

7488

Normal

Quality

54

90

290

108

180

580

216

360

1160

432

720

2320

864

1440

4640

1728

2880

9280

Low

Quality

55

96

298

110

192

596

220

384

1192

440

768

2384

880

1536

4768

1760

3072

9536



75

32MB

64MB

128MB

256MB

512MB

1GB

SD Card

640 x 480

320 x 240

640 x 480

320 x 240

640 x 480

320 x 240

640 x 480

320 x 240

640 x 480

320 x 240

640 x 480

320 x 240

Video clips can be taken

2.6 minutes

2.9 minutes

5.1 minutes

5.1 minutes

9.6 minutes

10 minutes

19.2 minutes

20.6 minutes

37.7 minutes

40.1 minutes

75.6 minutes

81.1 minutes

NOTE:

Scene complexity affects a picture’s file size. For example, a picture of trees in autumn has a larger file size than a picture of blue sky at the same resolution and quality setting. Therefore, the number of pictures you can store on a memory card may vary.

76



77

• Uninstalling Polaroid izone300 driver (PC Only)

For Windows® 98SE Users:

PC

NOTE:

The following driver uninstall procedure is for Windows 98SE users only because only Windows 98SE needs to install the izone300 driver.

1. Open Add/Remove Program Properties in Control Panel and select

“Polaroid Digital Cam" program, then click Add/Remove .

2. The following dialogue box appears, click "OK" to confirm removing the camera driver.

3. The uninstallation program runs automatically, please restart your computer when it is finished.

76



77

• Camera Default Settings

Camera Mode

Still Image Mode

Video Mode

Setup Mode

Description

Image Resolution

Quality

Exposure Compensation

White Balance for Pictures

Flash Mode

Video Resolution

White Balance

Date Format

Auto Power Off

Beep

Frequency

Language

Date Stamp

Twain Driver

Default

2048 x 1536

High

Auto

Auto

Auto Flash

640 x 480

Auto

DD/MM/YY

1 minute

Off

60 Hz

English

Off

Mass Storage

NOTE:

The default language for the LCD screen may vary with different countries and regions.

78



79

78


• Using Your Battery

Limit the following activities that reduces battery life:

• Reviewing your pictures on the LCD screen.

• Using the LCD screen to take pictures (Use the optical viewfinder to frame pictures).

• Excessive use of the flash.

WARNINGS!

• Battery should be recharged by an adult.

• Batteries life varies depends on the camera usage.

These instructions should be retained for future reference.

• Tips, Your Safety & Maintenance

Your Camera should only be operated within the following environmental conditions;

• 32 - 104º Fahrenheit; 0 - 40º Celsius

• 20% - 85% relative humidity, non condensing

Battery life or image quality may be affected outside these conditions.

Camera Cautions

• NEVER immerse any part of the Camera or its accessories into any fluid or liquid.

• ALWAYS disconnect the Camera from your PC or TV before cleaning it.

• ALWAYS remove dust or stains with a soft cloth dampened with water or neutral detergent.

• NEVER place hot items on the surface of the Camera.

• NEVER attempt to open or disassemble Camera as this will affect any warranty claim.


79

• Regulatory Information

FCC Notice

This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

80



81

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.

• Consult the dealer or an experienced radio/TV technician for help.

Shielded cable must be used with this unit to ensure compliance with the Class B FCC limits.

Under the environment with electrostatic discharge, the product may malfunction and require user to reset the product.

80



81

US 0505

Part No.: OM3334US001

Polaroid 300 Digital Camera User guide

Digital Camera User Guide

Product Overview

Table of Contents

1 Getting Started

• Camera Package Contents

• Attaching the Hand Strap

• Using the Docking Station

• Charging the Battery

• Turning the Camera On and Off

• Reset Feature

• Checking the Battery Power Level

• How to Navigate Menus

2 Camera Setting

• Checking Camera Status

• Camera Modes

• Drive Mode

• Setup Menu

• Formatting the Internal Memory

• Setting the Current Date and Time

• Auto Power Save Setting

• Setting the Beep Sound On/Off

• Setting Frequency

• Setting Display Language

• Setting the Date Stamp On and Off

• Resetting to Default Settings

• Switching the Information Display and LCD Screen On and Off

3 Taking Pictures

Before you take pictures, please read this note first:

• Taking a Picture

• Taking a Picture with the LCD Screen Off

• Setting Flash Mode

• Setting Self-timer

• Zoom Feature

• Setting the Image Size and Quality

• Setting Exposure Compensation

• Setting the White Balance for Pictures

4 Recording Video Clips

• Recording Video Clips

• Setting Video Resolution

• Setting the White Balance for Video Clips

5 Reviewing and Managing Pictures and Video Clips

• Reviewing the Pictures

• Reviewing Picture and Video Clip Files in Thumbnail

• Auto Play

• Playing the Video Clip

• Protect or Unprotect Picture(s) or Video Clip(s)

• Deleting Picture(s) or Video Clip(s)

6 Print Settings

• About PictBridge

• DPOF (Digital Print Order Format)

7 Using the SD (Secure Digital) Card

• Using the SD Card

• To Copy Pictures and Video Clips from Internal Memory to a

Memory Card

8 Installing the Software onto a Computer

• Installing the Software

• Software Included with Your Camera

• Computer System Requirements

9 Transferring Pictures and Video Clips to Your Computer

• Before You Transfer Files

• Changing the Driver Type Between Mass Storage Mode and

PC Camera Mode

• Connecting to Your Computer

• Transferring Pictures and Video Clips

10 Using the Camera as a Web Cam

• Setting up NetMeeting

• Start NetMeeting

11 Troubleshooting Problems

12 Getting Help

• ArcSoft Software Help

13 Appendix

• Technical Specifications

• Capacity of SD Cards

• Uninstalling Polaroid izone300 driver (PC Only)

• Camera Default Settings

• Using Your Battery

• Tips, Your Safety & Maintenance

• Regulatory Information

Related manuals

plawa-feinwerktechnik GmbH & Co.KG