Polycom 150 Telephone User Manual
Add to my manualsPolycom 150 is a wireless telephone that offers a range of features to enhance your communication experience.
Make and receive calls with ease using the dedicated START and END buttons. Answer a second call without interrupting your current conversation by pressing HOLD or END. To put a call on hold, simply press HOLD and retrieve it later by pressing the corresponding LINE key.
Mute the microphone during a call by pressing the MUTE softkey. Access various menu screens by pressing FCN while off-hook. Change handset settings by pressing CFG while on-hook.
For added convenience, toggle between two display views to see all 24 possible characters per line. Use the arrow icons on the display to guide you.
advertisement
Wireless Telephone Quick Reference Guide
Siemens Hicom 150 optiset E Basic
PQRS
7
*
TUV
8
0
WXYZ
9
#
optiset E Basic
Pressing LINE followed by a digit (1 or 2) on the Wireless
Telephone is equivalent to pressing one of the line keys on the optiset E Basic (lines 1 and 2).
Pressing FCN followed by a digit (2-6) on the Wireless
Telephone is equivalent to pressing one of the programmable feature keys on the optiset E Basic desk set. FCN followed by 9 allows you to exit the Wireless
Telephone function menu.
The OptiGuide™ Select, Previous, and Next keys do not exist on the optiset E Basic desktop telephone, but these functions will display and can be accessed on the Wireless
Telephone using the default function menu sequences shown below.
Toggle between the two display views in order to see all
24 possible characters per line sent by the Hicom CS by pressing LINE + #
►
and LINE + *
◄.
Use the arrow icons on the display to determine which key to press.
Function Key
Strokes
FCN + 1
Default
settings
MUTE
Fill In Your
Feature Settings
FCN + 2 (Voice Mail)
FCN + 3
FCN + 4
FCN + 5
FCN + 6
FCN + 0
FCN + *
FCN + #
FCN + 9 (Exit menus)
1725-36160-001_E Hicom is a trademark of Siemens
SpectraLink 6020 Wireless Telephone
On/Off Press and hold END. Two chirps on, one chirp off
Make a call Press START to get dial tone.
Hang up Press END. Be sure to do this at the end of each call.
Answer call Press START. Line indicator comes on steady when the call is answered.
Answer
second call
Press
HOLD to put your current call on hold, or
END to hang up.
Press LINE + the digit that is flashing.
Hold Press HOLD
Take off Hold Press LINE followed by the digit for the line on hold, which will be flashing.
Mute On/Off Press the MUTE softkey.
Function Pressing FCN while off hook allows you to scroll through menu screens.
User Options Press the CFG softkey while on hook to change handset settings.
For information on Battery Pack charging and setting user preferences, see the
Wireless Telephone User Guide. [email protected] • 800.775.5330
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project