Model No. 831.21941.2 Serial No. Write the serial number in the space above for reference. Serial Number Decal (under frame) • Assembly • Operation • Maintenance • Part List and Drawing Sears, Roebuck and Co. Hoffman Estates, IL 60179 BIKE EXERCISER User's Manual TABLE OF CONTENTS WARNING DECAL PLACEMENT ............................................................... IMPORTANT PRECAUTIONS .................................................................. BEFORE YOU BEGIN ........................................................................ PART IDENTIFICATION CHART ................................................................ ASSEMBLY ................................................................................ HOW TO USE THE EXERCISE BIKE ........................................................... FCC INFORMATION ........................................................................ MAINTENANCE AND TROUBLESHOOTING .................................................... EXERCISE GUIDELINES .................................................................... PART LIST ................................................................................ EXPLODED DRAWING ...................................................................... ORDERING REPLACEMENT PARTS ................................................... 90 DAY FULL WARRANTY ........................................................... 2 3 4 5 6 12 18 19 21 22 23 Back Cover Back Cover WARNING DECAL PLACEMENT This drawing shows the location(s) of the warning decal(s), if a decal is missing or illegible, call 1-888-533-1333 and request a free replacement decal. Apply the decal in the location shown. Note: The decal(s) may not be shown at actual size. , Misuse of this machine may result in serious injury. . Read user's manual prior to use and foflow all warnings and instructions, • Do not allow children on or around machine. • Pedals continue to spin when you stop pedaling. =Spinning ` pedals can cause injury. • Reduce pedal speed in a controlled manner. • User weight must not exceed 250 pounds. • Replace label if damaged, illegible, or removed. 2 [_ iMPORTANT PRECAUTIONS 3 BEFORE YOU BEGIN Thank you for selecting the new PROFORM '_'XP 210 U exercise bike. Cycling is an effective exercise for increasing cardiovascular fitness, building endurance, and toning the body. The XP 210 U exercise bike provides a selection of features designed to make your workouts at home more effective and enjoyable. reading this manual, please see the back cover of this manual. To help us assist you, note the product model number and serial number before contacting us. The model number and the location of the serial number decal are shown on the front cover of this manual. Before reading further, please familiarize yourself with the parts that are labeled in the drawing below. For your benefit, read this manual carefully before you use the exercise bike. If you have questions after Length: 3 ft. 7 in. (109 cm) Width: 2 ft. (61 cm) Heart Rate Monitor Console Handlebar Water Bottle Holder* Seat Knob Seat PostKnob Pedal Wheel *Water bottle is not included Leveling Foot 4 PART iDENTiFiCATiON CHART Use the drawings below to identify the small parts needed for assembly. The number in parentheses below each drawing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity needed for assembly. Note: If a part is not in the hardware kit, check to see if it has been preassembled. Extra parts may be included, if a part is missing, please call 1-888-533-1333. M4 x 16mm Screw (40)-6 M4 x 22mm Screw (54)-2 M8 x 25mm Button Screw (44)-6 M10 x 80mm Button Screw (36)-2 M8 x 60mm Button Screw (43)-4 M8 Split Washer (45)-6 5 ASSEMBLY Assembly requires two persons. In addition to the included tool(s), assembly requires the following tools: Place all parts in a cleared area and remove the packing materials. Do not dispose of the packing materials until you complete all assembly steps. one Phillips screwdriver (]_z;======_ one adjustable wrench To identify small parts, see page 5. Assembly may be easier if you have your own set of wrenches. To avoid damaging parts, do not use power tools. . Orient the Rear Stabilizer (14) as shown. While a second person lifts the rear of the Frame (1), insert the Rear Stabilizer into the Frame. Attach the Rear Stabilizer (14) with four M8 x 60mm Button Screws (43). 14 1.-. 43 . Orient the Front Stabilizer (2) as indicated by the sticker. 36 While a second person lifts the front of the Frame (1), attach the Front Stabilizer (2) to the Frame with two M10 x 80mm Button Screws (36). 6 , Orient the Upright (3) as shown. Have a second person hold the Upright near the Frame (1). Locate the wire tie in the lower end of the Upright (3). Tie the wire tie to the Main Wire (31). Then, pull the upper end of the wire tie until the Main Wire is routed through the Upright. Wire Tie Tip: To prevent the Main Wire (31) from falling into the Upright (3), secure the Main Wire with the wire tie. 3__/ Wire Tie , Tip: Avoid pinching the Main Wire (31). Set the Upright (3) on the Frame (1). 31 Attach the Upright (3) with four M8 x 25mm Button Screws (44) and four M8 Split Washers (45). Tip: Start all the Button Screws before fully tightening them. Avoid pinching the Main Wire (31) 44 44 7 . Orient the Top Shield (9) as shown. Slide the Top Shield onto the Upright (3). Attach the Top Shield (9) to the Frame (1) with two M4 x 16mm Screws (40). Orient the Top Shield Cap (10) as shown. Press the Top Shield Cap onto the Left and Right Shields (17, 18). 40 9 10 17, . Orient the Seat (12) and the Seat Carriage (30) as shown. Attach the Seat to the Seat Carriage with four M8 Locknuts (37), four M8 Split Washers (45), and four M8 Washers (56). 12 56 45_ 37 8 _56 '_3 _5 7 . Loosen and remove the Seat Knob (11) from the Seat Carriage (30). 12 Look underneath the Seat (12), and locate the Carriage Block (55) inside the Seat Carriage (30). Orient the Seat Post (5) as shown. Set the Seat Carriage (30) in the bracket on the Seat Post. Next, insert the Seat Knob (11) upward through the bracket on the Seat Post (5) into the hole in the Carriage Block (55). Then, tighten the Seat Knob. . Loosen and remove the Seat Post Knob (48) from the Frame (1). Next, insert the Seat Post (5) into the Frame (1), and press the Seat Post Bushing (20) downward into the Frame. Slide the Seat Post (5) upward or downward to the desired position, and then insert the Seat Post Knob (48) into the Frame and into one of the adjustment holes in the Seat Post. Then, tighten the Seat Post Knob. Adjustment Holes 9 20 , Orient the Console Plate (19) and the Handlebar (47) as shown. Have a second person hold the Console Plate and the Handlebar near the 31 \ Upright (3). Locate the Pulse Wire (52) in the Handlebar (47). Insert the Pulse Wire into the hole in the Upright (3), and then pull it upward out of the top of the Upright. 19 47---. Then, insert the Main Wire (31) and the Pulse Wire (52) upward through the Console Plate (19). 10. Tip: Avoid pinching the wires. Insert the Console Plate (19) into the Upright (3). 10 Attach the Handlebar (47) and the Console Plate (19) to the Upright (3) with two M8 x 25mm Button Screws (44) and two M8 Split Washers (45). 19 Avoid pinching the wires 45 11. The Console (6) can use four D batteries (not included); alkaline batteries are recommended, iMPORTANT: if the Console has 11 been exposed to cold temperatures, allow it to warm to room temperature before insert= ing batteries. Otherwise, you may damage the console displays or other electronic components. Battery Cover 6 \ Remove the screws and the battery covers from the back of the Console (6), and insert batteries into the battery compartments. Make sure to orient the batteries as shown by the diagrams inside the battery compartments. Then, reattach the battery covers. y Cover To purchase an optional power adapter, call the telephone number on the cover of this manual. To avoid damaging the console, use only a manufacturer=supplied power adapter. Plug one end of the power adapter into the receptacle on the console; plug the other end into an outlet installed in accordance with all local codes and ordinances. 10 12. While a second person holds the Console (6) near the Console Plate (19), connect the wires on the Console to the Main Wire (31) and to the Pulse Wire (52). 12 6 Insert the excess wire into the Console Plate (19) or into the Console (6). Tip: Avoid pinching the wires. Attach the Console (6) to the Console Plate (19) with four M4 x 16mm Screws (40). 19 13. Attach the Water Bottle Holder (49) to the Upright (3) with two M4 x 22mm Screws (54). 13 49 14. Identify the Right Pedal (26), which is marked with an "R." Using an adjustable wrench, firmly tighten the Right Pedal clockwise into the right arm of the Crank (13). 14 Tighten the Left Pedal (not shown) counter= clockwise into the left arm of the Crank (not shown). 26 Adjust the strap on the Right Pedal (26) to the desired position, and press the end of the strap onto the tab on the Right Pedal. Adjust the strap on the Left Pedal (not shown) in the same way. 15. Make sure that all parts of the exercise bike are properly tightened. Note: Some hardware may be left over after assembly is completed. To protect the floor or carpet from damage, place a mat under the exercise bike. 11 HOW TO USE THE EXERCISE BiKE HOW TO LEVEL THE EXERCISE BiKE HOW TO ADJUST THE SEAT POST If the exercise bike For effective exercise, the seat should be at the proper height. As you pedal, there should be a slight bend in your knees when the pedals are in the lowest position. rocks slightly on your floor during use, turn one or both of the leveling feet on the rear stabilizer until To adjust the seat post, first remove the seat post knob from the frame. Then, move the seat post upward or downward to the desired position, and insert the seat post knob into the frame and into the rocking motion is eliminated. HOW TO ADJUST THE SEAT To adjust the position of the seat, loosen the seat knob, move the seat forward or backward to the Seat Post Kn, one of the adjustment holes in the seat post. Then, tighten the seat post knob. iMPORTANT: Do not desired position, and then firmly tighten the seat knob. adjust the seat post beyond the stop mark on the seat post. 12 CONSOLE DIAGRAM | _mm  | mm_ TIME I SJ,LJ SPEED RESISTANCE RESISTANCE FEATURES OF THE CONSOLE For example, lose unwanted pounds with the 8-week Weight Loss workout, iFit workouts control the resistance of the pedals while the voice of a personal trainer coaches you through your workouts, iFit cards are available separately. To purchase iFit cards, go to www.iFit.com or call 1=888=533-1333. iFit cards are also available at select stores. The advanced console offers an array of features designed to make your workouts more effective and enjoyable. When you use the manual mode of the console, you can change the resistance of the pedals with the touch of a button. As you exercise, the console will provide continuous exercise feedback. You can even measure You can even connect your MP3 player or CD player to the console sound system and listen to your favorite music or audio books while you exercise. your heart rate using the handgrip heart rate monitor. The console offers fourteen preset workouts--seven weight loss and seven performance workouts. Each preset workout automatically changes the resistance of the pedals and prompts you to vary your pedaling speed as it guides you through an effective workout. To use the manual mode, see page 14. To use a preset workout, see page 16. To use the sound system, see page 17. To use the user mode, see page 18. Note: Before using the console, make sure that batteries are installed (see assembly step 11 on page 10). If there is a sheet of plastic on the display, remove the plastic. The console also features the iFit interactive workout system, which enables the console to accept iFit cards containing workouts designed to help you achieve specific fitness goals. 13 HOW TO USE THE MANUAL MODE 1. Profile--When a workout is selected, this display mode will show a profile of the resistance settings of the workout. Turn on the console. Press any button or begin pedaling to turn on the console. Pulse--This display mode will show your heart rate when you use the handgrip heart rate monitor (see step 5 on page 15). When you turn on the console, the display will light. A tone will sound and the console will be ready for Resistance (Res)--This display mode will show the resistance level of the pedals for a few seconds each time the resistance level changes. use. 2. Select the manual mode. Speed--This display mode will show your pedaling speed in miles per hour or kilometers per hour. When you turn on the console, the manual mode will be selected automatically. If you have selected a workout, reselect the manual mode by pressing the 7 Wt. Loss Workouts button or the 7 Perform. Workouts but- Time--When the manual mode is selected, this display mode will show the elapsed time. When a workout is selected, this display mode will show the time remaining in the workout. 13,1313 Lt'LJLJ TIME F1F1F_ Track--When the manual mode is selected, this display mode will show a track representing 1,/4 mile (400 m). As you exercise, indicators will appear in succession around the track until the entire track appears. The track will then disappear and the indicators will again begin to appear in succession. U, UU DISTANCE ton repeatedly until a track appears in the upper display. 3. Begin pedaling and change the resistance of the pedals as desired. As you pedal, change the resistance of the pedals by pressing the Resistance increase and decrease buttons. mmm_ rES Note: After you press the buttons, it will take a moment for the pedals to reach the selected resistance level. 4. Press the Display Mode button repeatedly to view the desired workout information. | To reset the display to zero, press the On/Reset button. ED09 | m TIME C Note: The console can show R pedaling speed and distance in either miles or kilometers. SPEED To view or change the unit of measurement, see THE USER MODE on page 18. Follow your progress with the display. The display can show the following workout information: Change the volume level of the console by pressing the Volume increase and decrease buttons. Calories--This display mode will show the approximate number of calories you have burned. Distance--This display mode will show the distance that you have pedaled in miles or kilometers. 14 @ 5. Measure your heart rate if desired. If your heart rate is not shown, make sure that your hands are positioned as described. Be careful not to move your hands excessively or to squeeze the contacts tightly. For optimal performance, clean the contacts using a soft cloth; never use alcohol, abrasives, or chemicals to clean the contacts. if there are sheets of plastic on the metal contacts on the Contacts handgrip heart rate monitor, remove the plastic, in addition, make sure that your hands are clean. To . When you are finished exercising, will turn off automatically. the console measure your heart rate, hold the handgrip heart rate monitor with If the pedals do not move for several seconds, a series of tones will sound, the console will pause, and the time will flash in the display. your palms resting against the contacts. Avoid moving your hands or gripping the contacts tightly. If the pedals do not move for several minutes, the console will turn off and the display will be reset. When your pulse is detected, a heart-shaped symbol will flash in the display and then your heart rate will be shown. For the most accurate heart rate reading, hold the contacts for at least 15 seconds. 15 HOW TO USE A PRESET WORKOUT 1. As you exercise, keep your pedaling speed near the goal speed for the current segment. The goal speed will appear in the display when the speed display mode is selected. Turn on the console. Press any button or begin pedaling to turn on the console. When you turn on the console, the display will light. A tone will sound and the console will be ready for Profile If the resistance level for the current segment is too high or too low, you can manually override the setting by pressing the Resistance buttons. IMPORTANT." When the current segment of the workout ends, the pedals will automatically adjust to the resistance level programmed for the next segment. repeatedly until the number of the desired workout appears in the lower display. When you select a preset workout, a profile of the resistance levels of the workout will scroll across If you stop pedaling for several seconds, a series of tones will sound and the workout will pause. the upper display, the duration of the workout will appear in the center display, and the number of the workout will appear in the lower display. 3. TiME SPEED Select a preset workout. To select a preset workout, press the 7 Wt. Loss Workouts button or the 7 Perform. Workouts button 9uRLt fS. IMPORTANT." The goal speed is intended only to provide motivation. Your actual pedaling speed may be slower than the goal speed. Make sure to pedal at a speed that is comfortable for you. use. 2. RESISTANCE F1 To resume the workout, simply resume pedaling. The workout will continue until the last segment of the profile flashes and the last segment of the workout ends. Begin pedaling to start the workout. Each workout is divided into several one-minute 4. segments. One resistance level and one goal speed is programmed for each segment. Note: The same resistance level and/or goal speed may be programmed for consecutive segments. Follow your progress with the display. See step 4 on page 14. 5. During the workout, the workout profile will show your progress (see the drawing above). The flashing segment of the profile represents the current segment of the workout. The height of the flashing segment indicates the resistance level for the current segment. Measure your heart rate if desired. See step 5 on page 15. . When you are finished exercising, will turn off automatically. See step 6 on page 15. At the end of each segment of the workout, a series of tones will sound and the next segment of the profile will begin to flash. If a different resistance level is programmed for the next segment, the resistance level will appear in the display for a few seconds to alert you. The resistance of the pedals will then change. 16 the console HOW TO USE AN IFIT WORKOUT A profile of the resistance levels of the workout will scroll across the upper display, the duration of the workout will appear in the center display, and the number of the workout will appear in the lower display. iFit cards are available separately. To purchase iFit cards, go to www.iFit.com or call 1-888-533-1333. iFit cards are also available at select stores. 1. Turn on the console. A moment after you select a workout, the voice of a personal trainer will begin guiding you through your workout, iFit workouts function in the same way as preset workouts. To use the workout, see steps 3 to 6 starting on page 16. Press any button or begin pedaling to turn on the console. When you turn on the console, the display will light. A tone will sound and the console will be ready for . use. 2. insert an iFit card and select a workout. exercising, remove the Remove the iFit card when you are finished exercising. Store the iFit card in a secure place. To use an iFit workout, insert an iFit card into the iFit slot; make sure that the iFit card is oriented so that the metal contacts are face down and are fac- HOW TO USE THE SOUND SYSTEM ing the slot. When the iFit card is properly inserted, the indicator next to the slot will light. iFit Slot/7 _ When you are finished iFit card. To play music or audio books through the console sound system while you exercise, plug the included audio cable into the jack on the console and into a jack on your MP3 player or CD player; make sure that the audio cable is fully plugged in. Next, press the Play button on your MP3 player or CD player. Adjust the volume level using the Volume increase and decrease buttons on the iFit Card console or the volume control on your MP3 player or CD player. Next, select the desired workout on the iFit card by pressing the increase and decrease buttons next to the iFit slot. 17 @ THE USER MODE The upper display will show the selected unit of measurement. An E for English miles or an M for metric kilometers will appear in the upper display. To change the unit of measurement, press the Resistance decrease button repeatedly. The console features a user mode that allows you to select a unit of measurement for the console and to view console usage information. 1. Select the user mode. Note: When you replace the batteries, it may be necessary to reselect the unit of measurement. To select the user mode, press and hold down the Display Mode button for a few seconds until the user 3. The center display will show the total number of hours that the console has been used since the mode information appears in the display. exercise bike was purchased. The lower display will show the total distance that the pedals have moved since the exercise bike was purchased. 4. 2_ Select a unit of measurement View console usage information if desired. if desired. Exit the user mode. Press the Display Mode button to exit the user mode. The console can show pedaling speed and distance in either miles or kilometers. FCC INFORMATION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, try to correct the interference by one or more of the following measures: • • • • Reorient or relocate the receiving antenna. Increase the separation between the equipment and the receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help. FCC CAUTION: To assure continued compliance, use only shielded interface cables when connecting to computer or peripheral devices. Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. 18 MAINTENANCE AND TROUBLESHOOTING Inspect and tighten all parts of the exercise bike regularly. Replace any worn parts immediately. Next, locate the Reed Switch (21). Loosen, but do not remove, the M4 x 16mm Screw (40). To clean the exercise bike, use a damp cloth and a small amount of mild soap. IMPORTANT: To avoid damage to the console, keep liquids away from the console and keep the console out of direct sunlight. CONSOLE TROUBLESHOOTING If the console display becomes dim, replace all the batteries at the same time; most console problems are the result of low batteries. See assembly step 11 on page 10 for replacement instructions. If the console does not display your heart rate when you use the handgrip heart rate monitor, see step 5 on page 15. HOW TO ADJUST THE REED SWITCH If the console does not display correct feedback, the reed switch should be adjusted. Using a flat screwdriver, remove the Top Shield Cap (10). Then, remove the two M4 x 16mm Screws (40) and lift the Top Shield (9) away from the frame. Rotate the Pulley (13) until a Pulley Magnet (16) is aligned with the Reed Switch (21). Slide the Reed Switch slightly toward or away from the Pulley Magnet. Then, retighten the M4 x 16mm Screw (40). Rotate the pulley for a moment. Repeat these actions until the console displays correct feedback. 4O 9 When the reed switch is correctly adjusted, reattach the top shield and the top shield cap. 19 HOW TO ADJUST THE DRIVE BELT Tip: It may be necessary to remove the right pedal. Using an adjustable wrench, turn the right pedal counterclockwise and remove it. if you can feel the pedals slip while you are pedaling, even when the resistance is adjusted to the highest level, the drive belt may need to be adjusted. Hold the two M8 Locknuts (37) and loosen the two M8 x 16mm Screws (53). Next, loosen the M10 x 50mm Screw (33) until the Drive Belt (23) is tight. Then, hold the M8 Locknuts and tighten the M8 x 16mm Screws. To adjust the drive belt, you must remove the top shield cap, the top shield, and the right shield (see the instructions below). Using a flat screwdriver, remove the Top Shield Cap (10). Then, remove the two M4 x 16mm Screws (40) and lift the Top Shield (9) away from the frame. 40 Then, reattach the right shield, the top shield, and the top shield cap. Reattach the right pedal, if necessary. Remove the five M4 x 16mm Screws (40) from the Right Shield (18). Then, gently move the Right Shield away from the frame. 2O EXERCISE GUiDELiNES Burning Fat--To burn fat effectively, you must exercise at a low intensity level for a sustained period of time. During the first few minutes of exercise, your body uses carbohydrate calories for energy. Only after the first few minutes of exercise does your body begin to use stored fat calories for energy. If your goal is to burn fat, adjust the intensity of your exercise until your heart rate is near the lowest number in your training zone. For maximum fat burning, exercise with your heart rate near the middle number in your training zone. Aerobic Exercise-- if your goal is to strengthen your cardiovascular system, you must perform aerobic exercise, which is activity that requires large amounts of oxygen for prolonged periods of time. For aerobic exercise, adjust the intensity of your exercise until your heart rate is near the highest number in your training zone. These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results. WORKOUT EXERCISE iNTENSiTY Warming Up--Start with 5 to 10 minutes of stretching and light exercise. A warm-up increases your body temperature, heart rate, and circulation in preparation for exercise. Whether your goal is to burn fat or to strengthen your cardiovascular system, exercising at the proper intensity is the key to achieving results. You can use your heart rate as a guide to find the proper intensity level. The chart below shows recommended heart rates for fat burning and aerobic exercise. 165 155 145 140 130 125 115 145 138 130 125 118 110 103 125 120 115 110 105 95 90 20 30 40 50 60 70 GUiDELiNES Training Zone Exercise--Exercise for 20 to 30 minutes with your heart rate in your training zone. (During the first few weeks of your exercise program, do not keep your heart rate in your training zone for longer than 20 minutes.) Breathe regularly and deeply as you exercise--never hold your breath. _ q._) Cooling Down--Finish with 5 to 10 minutes of stretching. Stretching increases the flexibility of your muscles and helps to prevent post-exercise problems. 80 EXERClSE FREQUENCY To find the proper intensity level, find your age at the bottom of the chart (ages are rounded off to the nearest ten years). The three numbers listed above your age define your "training zone." The lowest number is the heart rate for fat burning, the middle number is the heart rate for maximum fat burning, and the highest number is the heart rate for aerobic exercise. To maintain or improve your condition, complete three workouts each week, with at least one day of rest between workouts. After a few months of regular exercise, you may complete up to five workouts each week, if desired. Remember, the key to success is to make exercise a regular and enjoyable part of your everyday life. 21 PART LIST Key No. Qty. Model No. 831.21941.2 R0811B Description Key No. Qty. 1 2 1 1 Frame Front Stabilizer 30 31 1 1 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 1 2 1 1 1 1 1 1 1 1 1 1 2 2 1 1 1 1 1 1 1 1 1 1 1 1 1 Upright Stabilizer Cap Seat Post Console Flywheel Assembly Audio Cable Top Shield Top Shield Cap Seat Knob Seat Pulley/Crank Rear Stabilizer Wheel Pulley Magnet Left Shield Right Shield Console Plate Seat Post Bushing Reed Switch/Wire Reed Switch Clamp Drive Belt Left Pedal/Strap Idler Right Pedal/Strap Crank Bearing Set Seat Post Cap Resistance Motor 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 * * 1 1 1 3 2 6 2 1 17 4 1 4 6 10 2 1 1 1 2 2 1 2 2 1 4 - Description Seat Carriage Main Wire M10 Flange Nut M10 x 50mm Screw Resistance Cable M4.2 x 16mm Screw M10 x 80mm Button Screw M8 Locknut M10 x 41mm Button Screw M8 Flange Nut M4 x 16mm Screw M4 x 12mm Flange Screw Flywheel Axle M8 x 60mm Button Screw M8 x 25mm Button Screw M8 Split Washer Pulse Sensor Handlebar Seat Post Knob Water Bottle Holder Leveling Foot Handlebar Cap Pulse Wire M8 x 16mm Screw M4 x 22mm Screw Carriage Block M8 Washer User's Manual Assembly Tool Note: Specifications are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual, if a part is missing, call 1-888-533-1333. *These parts are not illustrated. 22 EXPLODED DRAWING Model No. 831.21941.2 R0811B 6 \ 40 8 19 51 40 . 40 18 52 5 40 31 49 44 44 45 41 36 15 38 16 23 43 23 13 Your Home For repair--in or heating your home--of all major brand appliances, and cooling systems, no matter who made For the replacement parts, accessories, lawn and garden equipment, it, no matter who sold it! iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii iiiiiiiiiiiiiiiii and user's manuals that you need to do-it-yourself. For Sears professional installation of home appliances and items like garage door openers and water heaters. 1-800-4-MY-HOME ® (1-800-469-4663) Call anytime, day or night (U.S.A. and Canada) www.sears.com www.sears.ca Our Home For repair of carry-in items like vacuums, lawn equipment, and electronics, call or go on-line for the location of your nearest Sears Parts & Repair Center. 1-800-488-1222 Call anytime, day or night (U.S.A. only) www.sears.com To purchase a protection agreement (U.S.A.) or maintenance agreement (Canada) on a product serviced by Sears: 1-800-827-6655 (U.S.A.) 1-800-361-6665 iiiiiiiiiiiiiiiiii (Canada) Para pedir servicio de reparaci6n a domicilio, y para ordenar piezas: ........... 1-888-SU-HOGAR ®(1-888-784-6427) ..... .... ® Registered Trademark / TMTrademark / SMService Mark of Sears Brands, LLC ® Marca Registrada / TM Marca de F&brica / SM Marca de Servicio de Sears Brands, LLC F 90 DAY FULL WARRANTY If this Sears Bike Exerciser fails due to a defect in material or workmanship within 90 days of the date of purchase, call 1-800-4-MY-HOME® (1-800-469-4663) to arrange for free repair (or replacement if repair proves impossible). There is a 5 year warranty on the frame. This warranty does not apply when the Bike Exerciser is used commercially or for rental purposes. This warranty gives you specific legal rights, and you may also have other rights which vary from state to state. Sears, Roebuck and Co., Hoffman Estates, IL 60179 Part No. 319341 R0811B Printed in China © 2011 ICON IP, Inc.
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project