Q-See IR DOME SERIES QPD308 security camera User manual

Below you will find brief information for security camera IR DOME SERIES QPD308. The IR DOME SERIES QPD308 is a security camera that offers long life, high reliability and excellent image with anti-burn ability. It's easy to install and is an excellent choice for CCTV. The camera has a 1/4 " Sony CCD image sensor, a resolution of 420 TVL and a minimum illumination of 0.5Lux/0Lux when IR LEDs are on. The camera has a 14m (45ft) IR LEDs distance, an operating temperature range from -10 °C to +60 °C (14 °F to +140 °F) and weighs 200 g (7 oz).

PDF

Document

：
B. OPERATION PROCEDURES:
A. OPERATION NOTICES
Digital Color CCD Camera
IR DOME SERIES
（1）Keep away from water;
（2）Don't touch CCD with fingers,if necessary clean
and remove dust with soft cloth dipped in alcohol;
（3）If you have questions or problems,please contact Q-see.
MANUAL
COLOR CCD CAMERA
：
INSTALLATION PRECAUTIONS
This camera uses a highly sensitive CCD
and full solid-state circuitry. It offers long
life, high reliablity and excellent image with
anti-burn ability. It is not subject to distortion
caused by magnetic fields. Easy to install, it
is an excellent choice for CCTV.
（1）Do not install the camera where it is aimed at a strong light.
（2）Do not install the camera in a place where temperature
goes above 60℃ (140&deg;F),or there is high humidity or rain
（3）Do not install the camera in a place where it is subjected to vibration
or impact from other devices
（4）Cover the CCD if the camera will not be in use for a long time.
（1）Remove the cap cover from top of camera.
（2）Remove C converter when using CS lens.
（3）Screw on the lens.
（4）Connect the camera to a monitor or recording
device with a 75Ω coaxial cable.
（5）Connect the camera to 12V DC power transformer.
（6）Modify the focus of lens to get an excellent image
when image appears on the screen.
（7）If object does not focus properly,when modifying focal length, please
try the following：
a Set the lens focal ring at unfixed.
b Focus on an object which is far
away from the camera.
c Adjust the lens and focal ring to focus the
object until you get a clear image.
d Tighten the lens fix screw.
CCTV SYSTEM
www.q-see.com
P1
：
：
C. INSTALLATION
（a）One monitor system with one camera：
AC ADAPTOR
、
：
F SPECIFICATIONS
D. DRAFT
Model
QPD308
Image Sensor
1/4&quot; Sony CCD
成像系统
Picture像素
Elements
水平解析度
Sync
System
同步系统
Scanning
system
扫描系统
视频输出
White
白平衡
Balance
Gamma
珈玛
S/N
Ratio
信噪比
Video
Output
电子快门
Usable
Illumination
最低照度
Video monitor
CAMERA
NTSC:512(H) 492(V)
420TVL
Horizontal Resolution
Electronic Shutter time
（b）One monitor system with two or more cameras：
CAMERA
AC ADAPTOR
Video monitor
Internal
Interlance2:1
NTSC: 1/50s~1/100000s
ON/OFF
0.45
≥48dB
1.0Vp-p 75Ω BNC
0.5Lux/0Lux (When IR LEDs On)
850nM
IR LEDs Wavelength
红外波长
IR LEDs
Amount
红外距离
红外数量
AGC
红外灯自动开关
BLC
增益控制
Mount
Lens
背光补偿
Lens
镜头接口
Power
Supply
镜头
电源
Operating功耗
Temperature
Weight
操作温度
DVR
IR LDEs Distance
14m (45ft)
IR LEDs Auto ON/OFF
Day/Night
23PCS
On/Off
On/Off
C/CS
3.6mm
DC12V
4W
Power Consumption
～+60℃ (14&deg;F to +140&deg;F )
-10℃
200g (7oz)
*When IR LEDs on
P4
P3
P2 P2
P2
P5
P6
Design and specifications are subject
to change without prior notice.
Printed in April 2009
">

Hello! I am an AI chatbot specifically trained to assist you with the Q-See IR DOME SERIES QPD308 User manual. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant is out of keyboard. Please, try again later.

Key features

High sensitivity CCD
Full solid-state circuitry
Long life and high reliability
Excellent image quality
Anti-burn capability
Not susceptible to magnetic field distortion
Easy to install
420 TVL horizontal resolution
0.5Lux/0Lux (With IR LEDs On) low-light sensitivity
14m (45ft) IR LED distance

Frequently asked questions

Remove the cap cover from the top of the camera. Remove the C converter if using a CS lens. Screw on the lens, connect the camera to a monitor or recording device with a 75Ω coaxial cable, and connect the camera to a 12V DC power transformer.

Modify the focus of the lens to get an excellent image when it appears on the screen. If the object does not focus properly, set the lens focal ring to unfixed, focus on an object far away from the camera, adjust the lens and focal ring to focus the object until you get a clear image, and tighten the lens fix screw.

Do not install the camera where it is aimed at a strong light, in a place where the temperature goes above 60℃ (140°F) or there is high humidity or rain, or in a place where it is subjected to vibration or impact from other devices.