RCA RP5405 Clock Radio User Manual

RCA RP5405 Clock Radio User Manual
v3.0 (EN/E)
FCC information
user manual
manual de usuario
RP5405
AM
WAKE
PM
EN/E
It is important to read this instruction prior to using your new product for the first time.
Es importante leer este manual antes de usar por vez primera su equipo.
Service information
Technical information
This product should be serviced
only by those specially trained in
appropriate servicing techniques.
For instructions on how to obtain
service, refer to the warranty
included in this user manual.
Product: Clock Radio
Brand: RCA
Model: RP5405
Power Supply: 120V ~ 60Hz
Power Consumption: 4 Watts
This device complies with Part
15 of the FCC Rules. Operation
is subject to the following two
conditions: (1) This device may not
cause harmful interference, and
(2) this device must accept any
interference received, including
interference that may cause undesired operation.
This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of FCC Rules.
These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This equipment generates, uses, and can
radiate radio frequency energy
and, if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications.
However, there is no guarantee
that interference will not occur
in a particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be determined by turning the equipment
off and on, the user is encouraged
to try to correct the interference
by one or more of the following
measures:
• Reorient or relocate the receiving antenna.
• Increase the separation
between the equipment and
receiver.
• Connect the equipment into
an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for
help.
Changes or modifications not
expressly approved by the party
responsible for compliance could
void the user’s authority to operate the equipment.
Audiovox Electronics Corp,
150 Marcus Blvd, Hauppauge,
NY 11788
1-877-833-3491
For your records
In the event that service should be
required, you may need the model
number and the serial number. In
the space below, record the date
and place of purchase and the
serial number:
Model No.:
Date of Purchase:
Place of Purchase:
Serial No.:
PLEASE READ AND SAVE THIS FOR FUTURE REFERENCE
IMPORTANT SAFETY INSTRUCTIONS
Some of the following information may
not apply to your particular product;
however, as with any electronic product,
precautions should be observed during
handling and use.
• Before using the product, please
follow and adhere to all warnings,
safety and operating instructions
located on the product and in the
user book. Save all instructions for
future reference.
• Do not expose product to rain and
do not use near water; such as, sink,
wet basement, swimming pools, etc.
• Always leave sufficient space around
the product for ventilation. Do
not place product in or on a bed,
rug, bookcase or cabinet that may
prevent air flow through vent openings.
• Do not expose product to extreme
temperatures such as found near
a hot radiator or stove, or in a car
parked in the Summer sun.
• Connect power cord only to AC
power source as marked on the
product.
• Some products employ a polarized
AC line plug (one blade is wider).
This is a safety feature. The plug
will go in the power outlet only
one way. If the plug doesn’t go into
the outlet completely, turn the plug
over and put it in the other way. If
it still doesn’t fit, contact a qualified
electrician to change the outlet. Do
not defeat the safety purpose of
the polarized plug.
• Route power cord to prevent it
from being pinched, or walked on,
or melted by a hot stove or radiator.
• To clean cabinet, unplug AC power
cord, then use a soft cloth dampened only with water.
• Do not place lighted candles, cigarettes, cigars, etc. on the product.
• Unplug AC power cord from outlet
during a lightning storm or when
product is left unused for a long period of time to prevent damage due
to lightning or power line surges.
• Care should be taken so that objects
do not fall and liquids do not spill
into the product.
• Never add accessories that the
product has not been designed to
accommodate.
• Use only the manufacturer’s approved mounting instructions and
hardware when installing product.
• Do not attempt to disassemble
the cabinet. This product does not
contain customer serviceable components.
• Do not handle the unit or power
cord when your hands are wet or
damp
• Carts and Stands —
]
The appliance should
be used only with a
cart or stand that is
recommended by the
manufacturer.
• An appliance and cart combination
should be moved with care. Quick
stops, excessive force, and uneven
The descriptions and characteristics in
this owner’s manual are for the purpose
of general reference only and not as a
guarantee. In order to provide you with
the highest quality product, we may
make changes or modifications without
prior notice. The English version serves
as the final reference on all product and
operational details should any discrepancies arise in other languages.
Plugging in for power
Battery back-up operation
AC OUTLET POWER SUPPLY:
120V~60Hz
The power failure protection
circuit will not operate unless
battery is installed.
Power is fed to the unit even
when it is not functioning. To cut
the power supply off, the power
cable must be unplugged.
SEE MARKING ON BOTTOM OF PRODUCT
•
•
•
•
When the battery backup
functions, the digital display will
not light, however, the wake
function still occurs during the
power interruption if remaining
battery power is adequate.
Normal operation will resume
after AC power is restored so you
will not have to reset the time or
wake.
Install battery as follow:
1. Remove battery compartment
door (located at the bottom of
the radio) by applying thumb
pressure to the tab on battery
door and then lift the door
out and off the cabinet.
2. Connect a 9-volt battery (not
supplied) to the connector
plug.
3. Replace the compartment door.
Power failure indicator
Alkaline (NEDA 1604A/
IEC 6LR61) battery
is recommended.
Carbon-zinc battery may be
used but memory holding
time will be substantially
reduced. Memory holding
time for a fresh alkaline
battery is approximately 8
hours (if radio or alarm are
not operated) which should
take care of short, nuisancetype AC power failures. To
preserve battery life, the unit
should remain plugged into
an AC outlet. As the battery
gets older, its voltage drops
and memory may be lost. Be
sure to replace the battery
periodically. Battery should
be removed if the unit will
be stored for more than one
month. Leaky battery can
badly damage the clock radio.
When AC power is interrupted
(disconnected) for a short period
of time, both time and alarm
settings will change (unless
battery is installed). After AC
power is restored (reconnected),
the Digital Display will blink
to indicate that power was
interrupted and you should
readjust the time and alarm
settings.
Left view
+ VOL –
BAND
AM FM
Top view
FM MHz
OFF
88
ON
530
92
AM kHz
RADIO
Z
Z
ALARM
HR
MIN
WAKE
SLEEP
ON
OFF
WAKE
OFF
WARNING:
Turning on/off
AM Antenna – A built-in ferrite
rod antenna eliminates the need
for an outside antenna for AM reception. Rotating the unit slightly
may improve reception of distant
AM stations.
• Slide the
selector to ON
on the top of
the unit to turn
on the radio.
• To turn off,
slide the
selector to OFF.
FM Antenna – The power cord
acts as your FM antenna. The
power cord picks up moderate to
strong stations and eliminates the
need for an external antenna in
most strong signal areas. Be sure
the power cord is stretched out
to its full length. Do not coil or
bunch the cord together. Changing position of the power cord
may improve reception.
Built-In AFC – The Built-In Automatic Frequency Control (AFC)
works only on FM. It helps to
reduce drift on FM reception and
to keep the radio locked in on the
FM station to which it is tuned.
Setting clock time
OFF
ON
ALARM
RADIO
WAKE
OFF
RADIO
ON
ALARM
WAKE
Selecting bands
Slide the BAND switch
on the side of the unit to
select between AM and
FM bands.
BAND
AM FM
Tuning to stations
Rotate the tuning knob
on the side of the unit to
tune up and down radio
frequency.
Setting Sleep time
1. Press Z Z , the time display
shows 0:59 (default time) and
the radio will turn on.
2. While holding Z Z , press HR
or MIN to set the sleep time
(from 0:01 to 1:59).
HR
MIN
• The clock is in 12 hour format.
The AM or PM indicator lights
to show the respective time on
the front display.
3. Release
and the clock time
is set.
Setting wake time
Selecting wake source
1. Press and hold WAKE on the
top of the unit.
2. While holding WAKE, press
HR or MIN to select the hour
or minute value of the wake
time.
• The clock is in 12 hour format.
The AM or PM indicator lights
to show the respective time on
the front display.
You can select to be woken up by
either the radio or alarm.
HR
MIN
WAKE
OFF
3. Release WAKE and the wake
time is set.
88
530
92
AM kHz
Wake to radio: slide the selector
to RADIO WAKE.
OFF
ON
WAKE
• The last tuned frequency is the
wake radio station.
• Adjust the wake volume to a
suitable level when selecting
the wake to radio mode.
OFF
MIN
3. Release Z Z . The sleep time is
set and the display reverts to
current time.
• If you decide to turn off the
unit sooner, press SNOOZE.
• Sleep time will be reset to
00:59 when Z Z is pressed.
Limited Warranty (US)
What your warranty covers:
• Defects in materials or workmanship.
For how long after your purchase:
• One year from date of purchase.
• The warranty period for rental
units begins with the first
rental or 45 days from date of
shipment to the rental firm,
whichever comes first.
What we will do:
• Provide you with a new, or at
our option, a refurbished unit.
The exchange unit is under
warranty for the remainder of
the original product’s warranty
period.
• Proof of purchase in the form
of a bill of sale or receipted
invoice which is evidence that
the product is within the warranty period must be presented to obtain warranty service.
For rental firms, proof of first
rental is also required.
How to make a warranty claim:
• Properly pack your unit. Include any cables, etc., which
were originally provided with
the product. We recommend
using the original carton and
packing materials.
• Include evidence of purchase
date such as the bill of sale.
Also print your name and address and a description of the
defect. Send via standard UPS
or its equivalent to:
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
• Insure your shipment for loss
or damage. Thomson accepts
no liability in case of damage
or loss en route to Thomson.
• Pay any charges billed to you
by the Exchange Center for
service not covered by the warranty.
• A new or refurbished unit
will be shipped to you freight
prepaid.
What your warranty does not
cover:
• Customer instruction. (Your
Owner’s Manual provides information regarding operating
Instructions and user controls.
For additional information, ask
your dealer.)
• Installation and set-up service
adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been
modified or incorporated into
other products.
• Products purchased or serviced
outside the USA.
• Acts of nature, such as but not
limited to lightning damage.
Product Registration:
• Please complete and mail
the Product registration Card
packed with your unit. It will
make it easier to contact you
should it ever be necessary.
The return of the card is not
required for warranty coverage.
Cancel the wake function
completely:
Slide the selector to OFF.
ON
ALARM
WAKE
OFF
RADIO
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
____________________________________________________________________
ON
ALARM
WAKE
Limitation of Warranty:
• THE WARRANTY STATED
ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS
PRODUCT. ALL OTHER WARRANTIES, EXPRESS OR IMPLIED
(INCLUDING ALL IMPLIED WARRANTIES OF MERCHANTABILITY
OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY
DISCLAIMED. NO VERBAL OR
WRITTEN INFORMATION GIVEN
BY THOMSON INC., ITS AGENTS
OR EMPLOYEES SHALL CREATE
A GUARANTY OR IN ANY WAY
INCREASE THE SCOPE OF THIS
WARRANTY.
• REPAIR OR REPLACEMENT
AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER.
THOMSON INC. SHALL NOT BE
LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES
RESULTING FROM THE USE OF
THIS PRODUCT OR ARISING
OUT OF ANY BREACH OF ANY
EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT.
THIS DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY
ARE GOVERNED BY THE LAWS
OF THE STATE OF INDIANA.
Note
____________________________________________________________________
OFF
WAKE
Press and hold WAKE on the top
of the unit to show the currently
set wake time. Release the button
to revert to current time.
If you set Sleep function
with low volume level
before going to bed, we
advise using Wake to
alarm mode.
Silence the wake function
momentarily:
Press SNOOZE. The wake function
will activate again when the
snooze period (9 minutes) is over.
Stop the wake function:
Press WAKE OFF. The wake
function will activate again on the
following day at the same time.
Wake to alarm: slide the selector
to ALARM WAKE.
RADIO
Checking wake time
ALARM
RADIO
Turning off wake function
• The wake indicator
lights on the front
display once any
of the wake sources is
selected.
• Once the wake source is
selected, the wake function
will be activated at the set
wake time.
Limited warranty
In sleep function, the unit will
turn off automatically after a
specified time.
Z
The clock time blinks if it
is not set or after power
interruption (without
back-up battery installed).
FM MHz
Sleep function
Z
1. Press and hold on the top of
the unit.
2. While holding , press HR
or MIN to select the hour or
minute value of the current
clock time.
HR
FM MHz / AM kHz – adjusts radio
frequency
Z
Z – activates sleep function
OFF – turns radio off, cancels the
wake function
ON – turns radio on
RADIO WAKE – activates wake to
radio mode
ALARM WAKE – activates wake
to alarm mode
SNOOZE – when wake setting
activates, press this button to
quiet the wake alarm or radio
temporarily until the snooze
period (9 minutes) is over; press
this button to cancel the sleep
function
HR/MIN – adjusts either the hour
or minute value of the clock or
wake time
– adjusts the clock time (refer
to Clock)
WAKE (OFF) – adjusts the wake
time, turns off the wake function
(refer to Wake Function)
Wake function
Clock
Antennas
Important Battery Precautions
• Any battery may present a risk of
fire, explosion, or chemical burn
if abused. Do not try to charge a
battery that is not intended to be
recharged, do not incinerate, and
do not puncture.
• Non-rechargeable batteries, such as
alkaline batteries, may leak if left in
your product for a long period of
time. Remove the batteries from the
product if you are not going to use
it for a month or more.
• If your product uses more than one
battery, do not mix types and make
sure they are inserted correctly.
Mixing types or inserting incorrectly
may cause them to leak.
• Discard any leaky or deformed battery immediately. They may cause
skin burns or other personal injury.
• Please help to protect the environment by recycling or disposing of
batteries according to federal, state,
and local regulations.
+ VOL – – adjusts volume
BAND AM/FM – selects radio
band
TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO
RAIN OR MOISTURE.
Radio
an attempt is made to charge a battery not intended to be recharged.
C. Discard leaky batteries immediately. Leaking batteries can cause
skin burns or other personal injury.
When discarding batteries, be sure
to dispose of them in the proper
manner, according to provincial and
local regulations.
General controls
Before you begin
The AC power plug is
polarized (one blade is
wider than the other)
and only fits into AC
power outlets one way.
If the plug will not go into the
outlet completely, turn the plug
over and try to insert it the other
way. If it still does not fit, contact
a qualified electrician to change
the outlet, or use a different one.
Do not attempt to bypass this
safety feature.
surfaces may cause the appliance
and cart combination to overturn.
Damage Requiring Service –This
product should be serviced by qualified service personnel when:
A. The power supply cord or the
plug has been damaged; or
B. Objects have fallen, or liquid has
been spilled into the product; or
C. The product has been exposed to
rain; or
D. The product does not appear
to operate normally or exhibits a
marked change in performance; or
E. The product has been dropped,
or the cabinet damaged.
When service or repairs are completed, ask the service technician to
perform the safety check described
in the service manual and to
confirm that replacement parts have
the same safety characteristics as
the original parts.
Overloading - Do not overload the
wall outlets, extension cords or integral convenience receptacles as this
can result in a risk of fire or electric
shock.
IF YOUR PRODUCT OPERATES ON
BATTERIES, adhere to the following precautions:
A. Any battery may leak electrolyte
if mixed with a different battery
type, if inserted incorrectly, or if all
batteries are not replaced at the
same time.
B. Any battery may leak electrolyte
or explode if disposed of in fire or
Audiovox Electronics Corp,
150 Marcus Blvd, Hauppauge,
NY 11788
©2008
Trademark(s) ® Registered
Marque(s) ® Deposée(s)
Marca(s) ® Registrada(s)
www.rcaaudiovideo.com
EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW,
ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE
ON THIS PRODUCT IS LIMITED
TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this
warranty:
• Some states do not allow the
exclusion nor limitation of
incidental or consequential
damages, or limitations on
how long an implied warranty
lasts, so the above limitations
or exclusions may not apply to
you.
• This warranty gives you specific
legal rights, and you also may
have other rights that vary
from state to state.
If you purchased your product
outside the USA:
• This warranty does not apply.
Contact your dealer for warranty information.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement