Samsung FER300SXPKG Range User Manual

Samsung FER300SXPKG Range User Manual
Your headset overview
Primary microphone
Power switch
Indicator light
Charging status light
Sound quality switch
Stop button
Adapter jack
REW button
FF button
▪ 1301
East Lookout Drive Richardson, Talk button
Line-in cable jack
Secondary microphone
Volume control buttons
TX 75082 nternet Address: ▪ I
ustomer Care Center: ▪ C1-888-987-4357
Guide No.: GH68-17651A
04/2008. Rev. 1.0
Charging the headset
This headset has a rechargeable internal battery which is nonremovable. Ensure that you fully charge
the battery before using the headset for the first time.
1 P
ut the travel adapter into the adapter jack and
into a power outlet.
• Make sure you have the following items with your
headset : Travel Adapter, User’s Guide, Pouch, Line-in Cable. The items supplied with your headset
may vary depending on your region.
• Use only a Samsung-approved travel adapter
Unauthorized adapters may cause an explosion or
damage to the headset.
• The battery will gradually wear out while charging or discharging because it is a consumable part.
• When a call comes in while charging, disconnect your
headset from the travel adapter and answer the call.
The charging status light tunes on red.
Wearing the headset
Place the headset on your ear. Ensure to put the
correct (Left, Right) earpiece on each ear.
Turning the headset on or off
2 D
isconnect the travel adapter from the power
outlet and the headset when the charging status
light changes to blue.
• S
lide the power switch
• Slide the power switch
to turn the headset on.
to turn the headset off.
Pairing with your Bluetooth phone
Using call functions
1 Enter Pairing mode.
Some features may not be supported by your phone.
• Turn the headset on with pressing and holding [
]. The indicator light turns on blue and stays lit after flashing blue, red, and purple twice.
• If you turn the headset on for the first time,
it proceeds into Pairing mode immediately.
2 S
earch for and connect with your phone according
to your phone user's guide. (Bluetooth PIN: 0000,
4 zeros).
When the headset and the phone are paired, press [
to reconnect via the previously connected Headset Profile
or Hands-Free Profile, or press [
] to reconnect via the
Advanced Audio Distribution Profile.
] to:
Press and hold [
• Place a call on hold
• Place the first call on hold and answer a second call
• Retrieve a call on hold
When the headset is waiting for a call,
] to:
Press [
• Answer an incoming call
• Redial the last number called
] to:
Press and hold [
• Make a voice-activated call
• Reject an incoming call
When the headset has a call in progress,
] to:
Press [
• End a call
• Transfer a call from the phone to the headset
• End the first call and answer a second call
Specifications and description
Bluetooth version
Support profile
Headset Profile, Hands-Free Profile,
Advanced Audio Distribution Profile,
Audio/Video Remote Control Profile
Operating range
Up to 30 feet (10 meters)
Standby time
Up to 300 hours*
Talk time
Up to 11 hours*
Play time
Up to 11 hours*
Charging time
Approximately 3 hours*
Press [+] or [-] to adjust the volume.
Press and hold [+] or [-] to turn the microphone off
or on.
Using music control functions
] to:
Press [
• Listen to music
• Pause and resume playback
Press and hold [
Press [
] to stop playback.
] to skip backward or [
Press and hold [
forward in a file.
] to skip forward.
] to scan backward or [
Press [+] or [-] to adjust the volume.
] to scan
epending on the phone type and usage, the actual time may
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF