Samsung FTQ352IWX User manual

Add to my manuals
56 Pages

advertisement

Samsung FTQ352IWX User manual | Manualzz
FTQ352IWX
FTQ352IWB
FTQ352IWW
Electric Range
user manual
imagine the possibilities
Thank you for purchasing this Samsung product.
To receive more complete service, please register
your product at
www.samsung.com/global/register
FTQ352IWX_XAC DG68-00106A.indb 1
2007-09-10 ¿ÀÈÄ 3:49:04
features of your new range
Enhanced convenience. Better cooking. Easy maintenance. Your new electric range has been designed to
bring you these benefits and more.
• The latest in heat-distribution technology
Other ranges with just one fan tend to make a swirl of heat that fails to cover the whole inside of
the oven. This means uneven heat distribution and uneven cooking. Your new range has Surround
Airvection™, which Samsung innovated by adding a third heating element and a multi-fan system
that circulates the heat evenly in all directions. You get more efficient energy consumption and
more even cooking.
• Steam Quick cleaning
Thanks to Steam Quick™, Samsung’s unique technology for light-duty cleaning jobs, keeping
your oven spick-and-span is a snap — no hassle, no odor, no chemicals. Steam Quick™ cleans
the inside of your range with high-temperature steam in just 20 minutes.
• Bigger is better
With a capacity of 5.7 cubic feet, your new range is equipped with more space than any of its
competitors in the U.S. market. This means greater convenience for you when cooking for the
holidays or when entertaining.
• A cooktop with 5 burners
Four main burners with two that dial heat up to different pot sizes.
A smaller warming burner in the center of the range top.
FTQ352IWX_XAC DG68-00106A.indb 2
2007-09-10 ¿ÀÈÄ 3:49:04
important safety instructions
Read and follow all instructions before using your oven to prevent the risk of fire, electric shock,
personal injury, or damage when using the range. This guide does not cover all possible conditions
that may occur. Always contact your service agent or manufacturer about problems that you do not
understand.
SAFETY SYMBOLS
WARNING: This symbol alerts you to hazards or unsafe practices that could cause
serious bodily harm or death.
CAUTION: This symbol alerts you to hazards or unsafe practices that could cause
bodily injury or property damage.
Do not attempt or use.
Do not disassemble.
Do not touch.
Follow directions explicity.
Unplug the power plug from the wall socket.
Make sure the machine is grounded to prevent electric shock.
Call the service center for help.
Note
ANTI-TIP DEVICE
To reduce the risk of tipping the range, the range must be secured by a properly installed Anti-Tip
device. Refer to the installation manual for instructions.
WARNING
ALL RANGES CAN TIP AND CAUSE INJURIES TO PERSONS
INSTALL THE ANTI-TIP DEVICE PACKED WITH RANGE
FOLLOW ALL INSTALLATION INSTRUCTIONS
Do not step, lean, or sit on the doors of the range. These can cause the range to tip,
resulting in burns or serious injuries.
Check to see that the Anti-Tip device is installed properly. Then grasp the top rear edge of the
range and carefully attempt to tilt it forward. Verify that the Anti-Tip device is engaged.
If you pull the range out from the wall for any reason, make sure the device is properly engaged
when you push the range back against the wall. If it is not, there is a possible risk of the range
tipping over and causing injury if you or a child stand, sit or lean on an open door.
Important safety instructions _
FTQ352IWX_XAC DG68-00106A.indb 3
2007-09-10 ¿ÀÈÄ 3:49:04
FOR YOUR SAFETY
When using electrical appliances, basic safety precautions should be followed, including the
following:
Use this appliance only for its intended purpose as described in this Owner’s Manual.
Potentially hot surfaces include the cooktop, areas facing the cooktop, oven vent opening,
surfaces near the opening, crevices around the oven door.
Be sure your appliance is properly installed and grounded by a qualified technician.
Do not repair or replace any part of the appliance unless specifically recommended in the manual.
All other servicing should be referred to a qualified technician.
Always disconnect power to appliance before servicing by removing the fuse or switching off the
circuit breaker.
Do not enter inside the oven.
Do not store items of interest to children in cabinets above a range or on the back guard
of a range. Children climbing on the range to reach items could be seriously injured.
Do not leave children alone. Children should not be left alone or unattended in an area where
appliance is in use. They should never be allowed to sit or stand on any part of the appliance.
Never use your appliance for warming or heating the room.
Do not use water on grease fires. Turn off the oven to avoid spreading the flame. Smother the
fire or flame by closing the door or use dry chemical, baking soda, or foam-type extinguisher.
Storage in or on appliance. Flammable materials should not be stored in an oven or near
surface units. Be sure all packing materials are removed from the appliance before operating it.
Keep plastics, clothes, and paper away from parts of the appliance that may become hot.
Wear proper apparel. Loose-fitting or hanging garments should never be worn while using the
appliance.
Use only dry potholders. Moist or damp potholders on hot surfaces may result in burns from
steam. Do not let the potholder touch hot heating elements. Do not use a towel or other bulky
cloth.
Teach children not to play with the controls or any other part of the range.
_ Important safety instructions
FTQ352IWX_XAC DG68-00106A.indb 4
2007-09-10 ¿ÀÈÄ 3:49:04
SURFACE COOKING UNITS
Never leave surface units unattended at high heat settings. Boilovers cause smoking and greasy
spillovers that may ignite.
Do not lift the cooktop. Lifting the cooktop can lead to damage and improper operation of the range.
Do not operate the cooktop when there is no cookware. If the cooktop operates without a cookware,
the control knob will become hot.
Never use the glass cooktop surface as a cutting board.
Use care when touching the cooktop. The glass surface of the cooktop will retain heat after the controls
have been turned off.
Be careful when placing spoons or other stirring utensils on glass cooktop surface when it is in use.
They may become hot and could cause burns.
Use proper pan sizes. This appliance is equipped with surface units of different size. Select utensils
having flat bottoms large enough to cover the surface unit heating element. The use of undersized utensils
will expose a portion of the heating element to direct contact and may result in ignition of clothing. Proper
relationship of utensil to burner will also improve efficiency.
Glazed cooking utensils. Only certain types of glass, glass/ceramic, ceramic,earthenware, or other glazed
utensils are suitable for range-top service without breaking due to the sudden change in temperature.
Utensil handles should be turned inward and not extend over adjacent surface units. To reduce
the risk of burns, ignition of flammable materials, and spillage due to unintentional contact with the utensil,
the handle of a utensil should be positioned so that it is turned inward, and does not extend over adjacent
surface units.
Read and follow all instructions and warnings on the cleaning cream labels.
Be sure you know which control knob operates each surface unit. Make sure you turned on the correct
surface unit.
Always turn the surface units off before removing cookware.
When preparing flaming foods under the hood, turn the fan on.
Keep an eye on foods being fried at high or medium high heat settings.
APPLIANCE OUTLETS
The 120V appliance outlets located on the control console may be used to run portable
appliances placed on countertops beside the range.
The outlets operate independently and are not affected by range control settings.
Do not place portable appliances on the cooktop.
Damage to the portable appliance could result if
the cooktop is hot.
Circuit
Breakers
Appliance outlet circuit breakers: The circuit
breakers for the appliance outlets on your range
are located on top of the control console.They are
rated for 15 amps, that may trip if the appliance
plugged into it exceeds 15 amps. To reset the
circuit breaker, press the switch of located on the
control console.
If appliance outlet don’t operate, test out your small
portable appliance by plugging into other outlets.
Appliance
Outlet
Important safety instructions _5
FTQ352IWX_XAC DG68-00106A.indb 5
2007-09-10 ¿ÀÈÄ 3:49:05
OVEN
DO NOT TOUCH HEATING ELEMENTS OR INTERIOR SURFACES OF THE OVEN. Heating
elements may be hot even though they are dark in color. Interior surfaces of an oven become
hot enough to cause burns. During and after use, do not touch or let clothing or other flammable
materials contact heating elements or interior surfaces of oven until they have had sufficient time
to cool. Other surfaces of the appliance may become hot enough to cause burns. Among these
surfaces are oven vent openings and surfaces near these openings, oven doors, and windows of
oven doors.
Do not heat unopened food containers. Build-up of pressure may cause container to burst
and result in injury.
Do not use the oven to dry newspapers. If overheated, they can catch on fire.
Do not use the oven for a storage area. Items stored in an oven can ignite.
Use care when opening door. Let hot air or steam escape before you remove or replace food in
the oven.
Protective liners. Do not use aluminum foil to line the oven bottoms, except as suggested in the
manual. Improper installation of these liners may result in a risk of electric shock or fire.
Keep oven vent ducts unobstructed. The oven vent is located above the right rear surface
unit. this area could become hot during oven use. Never block this vent and never place plastic or
heat-sensitive items on vent
Placement of oven racks. Always place oven racks in the desired location while the oven is
cool. If the rack must be moved while oven is hot, do not let the potholder come in contact with
the hot heating element in the oven.
Do not allow aluminum foil or meat probe to contact heating elements.
WARMING DRAWER
DO NOT TOUCH THE HEATING ELEMENT OR THE INTERIOR SURFACE OF THE
DRAWER. These surfaces may be hot enough to burn.
REMEMBER: The inside surface of the drawer may be hot when the drawer is opened.
The purpose of the warming drawer is to hold hot cooked foods at serving temperature.
Always start with hot food; cold food cannot be heated or cooked in the warming drawer.
Use care when opening the drawer. Open the drawer a crack and let hot air or steam escape
before removing or replacing food. Hot air or steam which escapes can cause burns to hands,
face and/or eyes.
Do not use the drawer to dry newspapers. If overheated, they can catch on fire.
Do not use aluminum foil to line the drawer. Foil is an excellent heat insulator and will trap
heat beneath it. This will upset the performance of the drawer and it could damage the interior
finish.
Do not leave paper products, plastics, canned food or combustible materials in the drawer.
Never leave jars or cans of fat drippings in or near your drawer.
Do not warm food in the drawer for more than three hours.
_ Important safety instructions
FTQ352IWX_XAC DG68-00106A.indb 6
2007-09-10 ¿ÀÈÄ 3:49:05
SELF-CLEANING OVENS
Do not clean door gasket. The door gasket is essential for a good seal. Care should be taken
not to rub, damage, or move the gasket.
Never keep pet birds in the kitchen. The health of birds is extremely sensitive to the fumes
released during an oven self-clean cycle. Fumes may be harmful or fatal to birds. Move birds to a
well-ventilated room.
Clean in the self-clean cycle only parts listed in this manual. Before self-clean the oven,
remove the broil pan , rack, utensils, and food.
No commercial oven cleaner or oven liner protective coating of any kind should be used in or
on the outside of the oven. Use only a ceramic cooktop cleaner or the cleaner supplied with this
appliance on the glass cooktop.
Nickel oven shelves should be removed from the oven before beginning the self-cleaning cycle, or
they may discolor.
If the self-clean mode malfunctions, turn the oven off and disconnect the power supply. Have it
serviced by a qualified technician.
VENTILATING HOOD
Clean ventilating hoods frequently. Grease should not be allowed to accumulate on the hood
or filter.
When flaming foods under the hood, turn the fan on.
GLASS/CERAMIC COOKING SURFACES
DO NOT TOUCH SURFACE UNITS OR AREAS NEAR UNITS. Surface units may be hot even
though they are dark in color. Areas near surface units may become hot enough to cause burns.
During and after use, do not touch, or let clothing or other flammable materials contact surface
units or areas near units until they have had sufficient time to cool. Among these areas are the
cook-top and facing the cook-top.
Do not cook on broken cooktop. If cooktop should break, cleaning solutions and spillovers
may penetrate the broken cook-top and create a risk of electric shock. Contact a qualified
technician immediately.
Clean cooktop with caution. If a wet sponge or cloth is used to wipe spills on a hot cooking
area, be careful to avoid steam burn. Some cleaners can produce noxious fumes if applied to a
hot surface.
Before you begin
Clean the oven thoroughly before using for the first time. Remove accessories and operate
the oven at the bake setting at 400°F for 1 hour before using. There will be a distinctive odor; this
is normal, but ensure your kitchen is well ventilated during this conditioning period.
Important safety instructions _
FTQ352IWX_XAC DG68-00106A.indb 7
2007-09-10 ¿ÀÈÄ 3:49:05
contents
introducing your new range
9
10
9
9
Overview
What’s included with your range
surface cooking
10 About surface cooking
12 How to set the appliance for surface
cooking
14 Using the proper cookware
14 Choosing the proper cookware
15 Protecting the smoothtop surface
using the warming drawer
16 About the warming drawer
17 Turning the warming drawer on or off
16
18
operating the oven
18
19
20
20
21
22
23
25
27
28
29
31
32
33
33
34
maintaining your appliance
38
40
41
43
45
46
38
troubleshooting
48
52
The oven control panel
Setting the clock
Minimum and maximum settings
Setting the kitchen timer
Using the oven racks
Baking
Convection baking
Convection roasting
Timed cooking
Delay timed cooking
Broiling
Using the custom cook feature
Proofing
Using the keep warm function
Turning the oven light on and off
Extra features
Self-cleaning
Steam-cleaning
Care and cleaning of the oven
Care and cleaning of the glass cooktop
Removing and replacing the oven door
Removing and replacing the warming
drawer
47 Changing the oven light
48 Troubleshooting
warranty
_ Contents
FTQ352IWX_XAC DG68-00106A.indb 8
2007-09-10 ¿ÀÈÄ 3:49:05
introducing your new range
OVERVIEW
Surface control knobs
See page 11 for more
information
01 INTRODUCING
Oven control panel
See page 18 for more
information
Glass surface
Automatic oven
light switch
Oven light
Self/steam clean latch
Oven door
Warming drawer
Convection fan
Gasket
Shelf position
WHAT’S INCLUDED WITH YOUR RANGE
Wire racks
Broil pan
Broil pan insert
Cleaner &
cleaning pad
Introducing your new range _9
FTQ352IWX_XAC DG68-00106A.indb 9
2007-09-10 ¿ÀÈÄ 3:49:06
surface cooking
About surface cooking
BEFORE COOKING
CAUTION
• Do not use the glass cooktop surface as a cutting board.
• Do not place or store items that can melt or catch fire on the glass cooktop, even
when it is not being used.
• Turn the surface units on only after placing the cookware.
• Do not store heavy items above the cooktop surface. They could fall and damage it.
DURING COOKING
CAUTION
• Do not place aluminum foil or plastic items such as salt and pepper shakers, spoon
holders, or plastic wrappings on the range when it is in use. The hot air from the vent
could melt plastics or ignite flammable items.
• Make sure the correct surface unit is turned on.
• Never cook directly on the glass. Always use cookware.
• Always place the pan in the center of the surface unit you are cooking on.
• Never leave surface units unattended while using a high heat setting. Boilovers cause
smoking and greasy spillovers that may catch on fire.
• Turn the surface units off before removing cookware.
• Do not use plastic wrap to cover food. Plastic may melt onto the surface and be very
difficult to remove.
AFTER COOKING
CAUTION
• Do not touch the surface units until they have cooled down.
• The surface may be still be hot and burns may occur if the glass surface is touched
before it has cooled down sufficiently.
• Immediately clean spills on the cooking area to prevent a tough cleaning chore later.
• If cabinet storage is provided directly above the cooking surface, make sure that the
items are infrequently used and can be safely stored in an area subjected to heat.
Temperatures may be unsafe for items such as volatile liquids, cleaners or aerosol
sprays.
About the radiant surface elements
The temperature rises gradually and evenly. As the temperature rises, the radiant element will glow
red. To maintain the selected setting, the element will cycle on and off. The heating element retains
enough heat to provide a uniform and consistent heat during the off cycle. For efficient cooking,
turn off the element several minutes before cooking is complete. This will allow residual heat to
complete the cooking process.
Radiant elements have a limiter that allows the element to cycle ON and OFF, even at the HI
setting. This helps to prevent damage to the ceramic cooktop. Cycling at the HI setting is
normal and can occur if the cookware is too small for the radiant element or if the cookware
bottom is not flat.
10_ Surface cooking
FTQ352IWX_XAC DG68-00106A.indb 10
2007-09-10 ¿ÀÈÄ 3:49:07
Location of the radiant surface elements and controls
The radiant control knobs operate the radiant surface elements on the cooktop as shown below.
5
2
1. Single element: Left rear
2. Single element: Right rear
4
3
02 SURFACE COOKING
1
. Dual element: Left front
. Dual element: Right front
5. Warming center: Center rear
6
. Hot surface indicator
Hot surface indicator
• Comes on when the unit is turned on or hot to the touch.
• Stays on even after the unit is turned off.
• Glows until the unit is cooled to approximately 150°F.
Cooking areas
• The cooking areas on your range are identified by permanent circles on the glass cooking
surface. For the most efficient cooking, fit the pan size to the element size.
• Pans should not extend more than ½” to 1” beyond the cooking area.
• When a control is turned on, a glow can be seen through the glass cooking surface. The
element will cycle on and off to maintain the preset heat setting, even at high settings.
• For more information on selecting proper types of cookware, refer to the section “Using the
proper cookware” on page 14.
Surface cooking _11
FTQ352IWX_XAC DG68-00106A.indb 11
2007-09-10 ¿ÀÈÄ 3:49:07
How to set the appliance for surface cooking
• The surface elements may be hot and burns may occur. Do not touch surface
elements until they have cooled down sufficiently.
CAUTION
• At high or medium-high settings, never leave food unattended. Boilovers cause
smoking and greasy spillovers may catch on fire.
• Be sure you turn the control knob to OFF when you finish cooking.
• The area between the high and off settings, are not appropriate for cooking.
Single surface unit control knob (left rear, right rear)
1. Push the knob in.
2. Turn in either direction to the setting you want.
• At both the off and high settings, the knob clicks into position.
Dual surface unit control knob (left front, right front)
The dual surface unit has 2 cooking sizes to select from so you
can match the size of the unit to the size of the cookware you are
using.
1. Push the knob in.
2. Turn in either direction to the setting you want.
• To use the small surface unit, turn the control knob to the
small burner (A) settings.
• To use the large surface unit, turn the control knob to the
large burner (B) settings.
When changing from a high heat setting to a lower heat setting, the surface unit may stop
glowing. This is normal.
Recommended settings
SETTING
TYPE OF COOKING
HIGH
Starting most foods, bringing water to a boil, pan broiling
MEDIUM HIGH
Continuing a rapid boil, frying, deep fat frying
MEDIUM
Maintaining a slow boil, thickening sauces and gravies, steaming
vegetables
MEDIUM LOW
Keeping foods cooking, poaching, stewing
LOW
Keeping warm, melting, simmering
12_ Surface cooking
FTQ352IWX_XAC DG68-00106A.indb 12
2007-09-10 ¿ÀÈÄ 3:49:08
Using the warming center
The warming center, located in the back center of the glass surface, will keep hot, cooked food
at serving temperature.
• Do not warm food on the warming center for more than two hours.
• Use only cookware and dishes recommended as safe for oven and cooktop use.
CAUTION
• Always use potholders or oven mitts when removing food from the warming center as
cookware and plates will be hot.
• When warming pastries and breads the cover should have an opening to allow
moisture to escape.
• Food should be kept in its container and covered with a lid or aluminum foil to
maintain food quality.
• Always start with hot food. Eating uncooked or cold food placed on the warming
center could result in illness.
1. Turn the warming center on.
Press the WARMING CENTER ON/OFF pad.
02 SURFACE COOKING
• Do not use plastic wrap to cover foods. Plastic may melt onto the surface and be very
difficult to clean.
2. Select the power setting you want.
Pressing the WARMING CENTER LEVEL pad once will set it to
the level 1 setting. Press the pad twice for the level 2 setting, 3
times for level 3.
. Turn the warming center off.
Press the WARMING CENTER ON/OFF pad.
• Pressing the CLEAR/OFF pad does not turn the warming center off.
• The surface warmer will not glow red like the cooking elements.
• For best results, all foods on the warming center should be covered with a lid or
aluminum foil. When warming pastries or breads, the cover should be vented to allow
moisture to escape.
Recommended settings
LEVEL
TyPE OF FOOD
1
Breads/pastries, casseroles, gravies, eggs
2
Dinner plate with food, soups (cream), vegetables, sauces, stews, meats
Fried foods, soups (liquid), hot beverages
Surface cooking _1
FTQ352IWX_XAC DG68-00106A.indb 13
2007-09-10 ¿ÀÈÄ 3:49:08
USING THE PROPER COOKWARE
Using the right cookware can prevent many problems, such as uneven cooking or extended
cooking times. Using the proper pans will reduce cooking times and cook food more evenly.
CORRECT
Flat bottom and straight sides.
• Tight fitting lids.
Check for flatness by
rotating a ruler across the
bottom of the cookware.
INCORRECT
Curved and warped pan
bottoms.
• Weight of handle does not tilt
pan.
• Pan is well balanced.
• Pan size matches the amount
of food to be prepared
and the size of the surface
element.
• Made of a material that
conducts heat well.
Pan overhangs element by more
than one-half inch.
Pan is smaller than element.
• Always match pot diameter to
element surface diameter.
Heavy handle tilts pan.
CHOOSING THE PROPER COOKWARE
What your cookware is made of determines how evenly and quickly heat is transferred from the
surface element to the pan bottom.
• ALUMINUM - Excellent heat conductor. Some types of food will cause the aluminum to
darken. (Anodized aluminum cookware resists staining & pitting.). If aluminum pans are slid
across the ceramic cooktop, they may leave metal marks that resemble scratches. Remove
these marks immediately.
• COPPER - Excellent heat conductor but discolors easily. May leave metal marks on ceramic
glass (see above).
• STAINLESS STEEL - Slow heat conductor with uneven cooking results. Is durable, easy to
clean and resists staining.
• CAST IRON - A poor conductor; retains heat very well. Cooks evenly once cooking
temperature is reached. Not recommended for use on ceramic cooktops.
• ENAMELWARE - Heating characteristics will vary depending on base material. Porcelainenamel coating must be smooth to avoid scratching ceramic cooktops.
• GLASS - Slow heat conductor. Not recommended for ceramic cooktop surfaces because it
may scratch the glass.
1_ Surface cooking
FTQ352IWX_XAC DG68-00106A.indb 14
2007-09-10 ¿ÀÈÄ 3:49:09
Protecting the smoothtop surface
Cleaning
• Clean the cooktop before using it for the first time.
• Clean your cooktop daily or after each use. This will keep your cooktop looking good and can
prevent damage.
• If a spillover occurs while cooking, immediately clean the spill from the cooking area while it is
hot to prevent a tough cleaning chore later. Using extreme care, wipe the spill with a clean dry
towel.
• Do not allow spills to remain on the cooking area or the cooktop trim for a long period of time.
• Do not use chlorine bleach, ammonia, or other cleansers not specifically recommended for use
on a glass-ceramic surface.
Preventing marks and scratches
• Do not use glass cookware. They may scratch the cooktop.
• Do not place a trivet or wok ring between the cooktop and the pan. These items can mark or
scratch the cooktop.
02 SURFACE COOKING
• Do not use abrasive cleansing powders or scouring pads, which will scratch the cooktop.
• Make sure the cooktop and the pan bottom are clean.
• Do not slide metal pans across the cooktop.
Preventing stains
• Do not use a soiled dish cloth or sponge to clean the cooktop surface. A film will remain, which
may cause stains on the cooking surface after the area is heated.
• Continuously cooking on a soiled surface may/will result in a permanent stain.
Preventing other damage
• Do not allow plastic, sugar, or foods with high sugar content to melt onto the hot cooktop.
Should this happen, clean immediately.
• Do not let a pan boil dry as this will damage the cooktop. and the pan.
• Do not use the cooktop as a work surface or cutting board.
• Do not cook food directly on the cooktop without the proper cookware.
Surface cooking _15
FTQ352IWX_XAC DG68-00106A.indb 15
2007-09-10 ¿ÀÈÄ 3:49:09
using the warming drawer
About the warming drawer
The warming drawer will keep hot,
cooked foods warm. Always start with hot
food. Do not use to heat cold food other
than crisping crackers, chips or dry cereal.
Allow approximately 25 minutes for the
warming drawer to preheat.
• Do not line the warming drawer or pan with aluminum foil. Foil is an excellent heat
insulator and will trap heat beneath it. This will upset the performance of the drawer
and could damage the interior finish.
• Do not put liquid or water in the warming drawer.
• All foods placed in the warming drawer should be covered with a lid or aluminum foil. When
warming pastries or breads, the cover should be vented to allow moisture to escape.
• Remove serving spoons, etc., before placing containers in the warming drawer.
• Food should be kept hot in its cooking container or transferred to a heat-safe serving dish.
CAUTION
Plastic containers or plastic wrap will melt if in direct contact with the drawer, pan or a
hot utensil. Melted plastic may not be removable and is not covered under your warranty.
16_ Using the warming drawer
FTQ352IWX_XAC DG68-00106A.indb 16
2007-09-10 ¿ÀÈÄ 3:49:09
TURNING THE WARMING DRAWER ON OR OFF
1. Set the warming drawer to the heat level you want.
Press the WARMING DRAWER pad once for low, twice for
medium, or 3 times for high.
The warming drawer starts automatically once you have finished
selecting the level you want.
2. Turn the warming drawer off.
Press the WARMING DRAWER pad when the warming level is
high.
03 WARMING DRAWER
• Pressing the CLEAR/OFF pad does not turn the warming drawer off.
• The warming drawer cannot be used during a self-cleaning cycle.
Recommended settings
LEVELS
Low
Medium
High
TyPE OF FOOD
Rolls (soft), empty dinner plates
Gravies, eggs, biscuits, pastries, casseroles, vegetables, rolls (hard),
roasts (beef, pork, lamb)
Bacon, poultry, pizza, hamburger patties, pork chops, fried foods
• Different types of food may be placed in the warming drawer at the same time. For best
results, do not leave foods in the warming drawer for longer than 1 hour. Do not leave
smaller quantities or heat-sensitive foods, such as eggs, for longer than 30 minutes.
• The warming drawer will shut off automatically after 3 hours.
Using the warming drawer _1
FTQ352IWX_XAC DG68-00106A.indb 17
2007-09-10 ¿ÀÈÄ 3:49:09
operating the oven
THE OVEN CONTROL PANEL
READ THE INSTRUCTIONS CAREFULLy BEFORE USING THE OVEN. For satisfactory use
of your oven, become familiar with the various features and functions of the oven as described
below. Detailed instructions for each feature and function follow later in this user manual.
15
16
17
18
1
14
2
13
12
11
10
9
8
7
6
5
4
3
1. DISPLAy: Shows the time of day, oven temperature, whether the oven is in the bake, broil or
self-cleaning mode, and the times set for the timer or automatic oven operations.
2. NUMBER PADS: Use to set any function requiring numbers such as the time of day on the
clock, the timer, the oven temperature, the start time and length of operation for timed baking.
. SET/START: Must be pressed to start any cooking or cleaning function.
. CLEAR/OFF: Press to cancel all oven operations except the clock and timer, warming center,
warming drawer.
5. CLOCK AM/PM: Press to set the time of day.
. OVEN LIGHT: Press to turn the oven light on or off.
. CUSTOM COOK: Press to record and recall your favorite recipe setting.
. KITCHEN TIMER ON/OFF: Press to select the timer feature.
9. SELF CLEAN: Press to select self-cleaning function.
10. STEAM CLEAN: Press to select steam-cleaning function.
11. DELAy START: Use along with Bake, Conv. Bake, Conv. Roast, Cooking Time, and Self
Clean pads to set the oven to start and stop automatically at a time you set.
12. COOKING TIME: Press and then use the number pads to set the amount of time you want
your food to cook. The oven will shut off when the cooking time has run out.
1. BROIL: Press to select the broil function.
1. BAKE: Press to select the bake function.
15. CONVECTION BAKE: Press to select baking with the convection function.
1. CONVECTION ROAST: Press to select roasting with the convection function.
1. KEEP WARM: Press to keep cooked foods warm.
1. PROOF: Press to select a warm environment useful for rising yeast-leavened products.
1_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 18
2007-09-10 ¿ÀÈÄ 3:49:10
SETTING THE CLOCK
The clock must be set to the correct time of day for the automatic oven timing functions to work
properly.
• The time of day cannot be changed during a timed cooking, a delay-timed cooking or a selfcleaning cycle.
• You can choose between a 12-hour or 24-hour display. The default is 12-hour.
How to set the clock
1. Start the set up.
04 OPERATING THE OVEN
Press the CLOCK AM/PM pad.
2. Select AM or PM.
Press the CLOCK AM/PM pad again, once to select AM or twice
to select PM.
This step is skipped in the 24-hours display mode.
. Enter the present time.
Enter the current time in hours and minutes on the number pad,
eg. 1, 3, 0, for 1:30.
. Exit the set up.
Press the SET/START or CLOCK AM/PM pad.
How to change between a 12-hour and 24-hour display
1. Start the set up.
Press CLOCK AM/PM and 0 on the number pad at the same
time for 3 seconds.
The display will show the present mode (eg. 12 hour).
2. Select the display mode you want.
Press 0 on the number pad to select 12 hour or 24 hour.
Pressing 0 on the number pad changes the display between 12
hour and 24 hour.
. Exit the set up.
Press the SET/START pad.
Operating the oven _19
FTQ352IWX_XAC DG68-00106A.indb 19
2007-09-10 ¿ÀÈÄ 3:49:11
MINIMUM AND MAXIMUM SETTINGS
All of the features listed have minimum and maximum time or temperature settings.
A beep will sound each time a pad on the control panel is pressed and the entry is accepted. An
error tone will sound in the form of a long beep if the entered temperature or time is below the
minimum or above the maximum setting for the feature.
FEATURE
MINIMUM
MAXIMUM
Bake
150°F (65°C)
550°F (285°C)
Broil
LO (375°F)
HI (480°F)
2 Hr.
4 Hr.
Convection Bake
175°F (80°C)
550°F (285°C)
Convection Roast
175°F (80°C)
550°F (285°C)
Keep Warm
-
3 Hr.
Warming Center
-
3 Hr.
Warming Drawer
-
3 Hr.
Proof
-
12 Hr.
20 Min.
20 Min.
Self Clean
Steam Clean
SETTING THE KITCHEN TIMER
The kitchen timer serves as an extra timer that will beep when the set time has elapsed. It
does not start or stop cooking functions. The feature can be used during any of the other oven
functions.
How to set the timer
1. Turn the timer on.
Press the KITCHEN TIMER ON/OFF pad.
2. Select the unit of time you want.
Press the KITCHEN TIMER ON/OFF pad once to select hours/
minutes, twice to select seconds or three times to turn the kitchen
timer off.
. Enter the amount of time you want.
Enter the amount of time you want using the number pad, eg. 1,
5. The timer can be set for any amount of time from 1 minute to 9
hours and 99 minutes or 1 second to 99 minutes and 99 seconds.
If you make a mistake, press the KITCHEN TIMER ON/OFF pad
and start again.
. Start the timer.
Press the KITCHEN TIMER ON/OFF pad.
5. When the set time has elapsed, the oven will beep and the display
will show End until you press the KITCHEN TIMER ON/OFF pad.
You can cancel the timer at any time by pressing the KITCHEN
TIMER ON/OFF pad.
20_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 20
2007-09-10 ¿ÀÈÄ 3:49:11
USING THE OVEN RACKS
Oven rack positions
The oven has 7 rack positions (1~7).
TyPE OF FOOD
7
6
5
4
3
2
1
RACK POSITION
Angel food cake
2
Bundt or pound cakes
Biscuits, muffins, brownies,
cookies, cupcakes, layer cakes,
pies
Casseroles
Small roast, ham
2
Turkey, large roast
1
Baking layer cakes
Centering the baking pans in the oven as much as possible will produce better results. If baking
with more than one pan, place the pans so each has at least 1” to 1½” of air space around it.
If cooking on multiple racks, place the oven racks in positions 2 and 5. Place the cookware as
shown in the figures below.
Fig. 1
04 OPERATING THE OVEN
Frozen pies
Fig. 2
Before using the racks
The oven has two racks.
Each rack has stops that need to be placed correctly on the supports. These stops will keep the
rack from coming completely out.
REMOVING THE RACKS
REPLACING THE RACKS
1. Pull the rack straight out until it stops.
1. Place the end of the rack on the support.
2. Lift up the front of the rack and pull it out.
2. Tilt the front end up and push the rack in.
CAUTION
• Do not cover a rack with aluminum foil or place on the oven bottom. This will disturb
the heat circulation, resulting in poor baking, and may damage the oven bottom.
• Arrange the oven racks only when the oven is cool.
Operating the oven _21
FTQ352IWX_XAC DG68-00106A.indb 21
2007-09-10 ¿ÀÈÄ 3:49:12
BAKING
The oven can be programmed to bake at any temperature from 150°F to 550°F.
How to set the thermostat
1. Start the set up.
Press the BAKE pad. The default temperature is 350°F.
2. Enter the temperature you want on the number pad, eg. 3, 7, 5.
. Start the bake function.
Press the SET/START pad. The temperature display will start to
change once the oven temperature reaches 150°F.
. If you want to cancel baking or if you have finished, press the
CLEAR/OFF pad.
Place food in the oven after preheating if the recipe calls for it. Preheating is very important
for good results when baking cakes, cookies, pastry, and breads. After the oven has
reached the desired temperature, a long beep will sound 6 times.
How to adjust the thermostat while cooking
1. Start the set up.
Press the BAKE pad. The display will show the present
temperature, eg. 375°F.
2. Enter the temperature you want, eg. 425°F, by using the number
pad.
. Complete the entry by pressing the SET/START pad.
22_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 22
2007-09-10 ¿ÀÈÄ 3:49:12
CONVECTION BAKING
7
6
By using the convection bake feature, you will be able
to cook faster. You can program the oven for convection
baking at any temperature between 175°F and 550°F.
5
Convection baking uses a fan to circulate the oven’s heat
evenly and continuously within the oven. This improved
heat distribution allows for even cooking and excellent
2
1
results using multiple racks at the same time. Foods
cooked on a single oven rack will generally cook faster
and more evenly with convection baking. Multiple oven
rack cooking may slightly increase cook times for some foods, but the overall result is time saved.
Breads and pastries brown more evenly.
4
3
The amount of time you save will vary depending on the amount and type of food you are
cooking. When baking cookies or biscuits, you should use pans with no sides or very low sides
to allow the heated air to circulate around the food. Using a pan with a dark finish will allow faster
cooking times.
When using convection baking with a single rack, place the oven rack in position . If cooking on
multiple racks, place the oven racks in positions 2 and 5.
When baking a cake, using the bake mode will produce better results.
04 OPERATING THE OVEN
Tips for convection baking
How to set the oven for convection baking
1. Start the convection baking mode.
Press the CONV. BAKE pad. The default temperature is 350°F.
2. Enter the temperature you want, eg. 400°F, by using the number
pad.
. Press the SET/START pad to begin convection baking.
Conv. Bake and the adjusted oven temperature, eg. 375°F, will
appear in the display for 2 seconds.
The temperature display will start to change once the oven
temperature reaches 150°F.
A beep will sound 6 times when the adjusted oven temperature,
eg. 375°F, is reached and the display will show the auto-converted
oven temperature.
. Turn off or cancel convection baking by pressing the CLEAR/OFF
pad.
In convection baking mode, the oven automatically reduces the set regular baking
temperature by 25°F to the appropriate conversion temperature.
The convection oven fan shuts off when the oven door is opened.
DO NOT leave the door open for long periods of time while using convection cooking or
you may shorten the life of the convection heating element.
Operating the oven _2
FTQ352IWX_XAC DG68-00106A.indb 23
2007-09-10 ¿ÀÈÄ 3:49:13
Recommended convection baking guide
Rack Position
Temp.* (preheated
oven) ( ˚F )
Convection bake
time ** (min)
Cupcakes
4
325
17-19
Bundt Cake
3
325
35-43
Angel Food
2
325
35-39
2 crust, fresh, 9”
3
350-400
45-55
2 crust, frozen fruit, 9”
3
350
68-78
Sugar
4
325-350
12-17
Chocolate Chip
4
325-350
14-18
Brownies
4
325
29-36
Yeast bread, loaf, 9x5
3
350
18-22
Yeast rolls
4
350-375
13-18
Quick Bread, loaf, 8x4
3
325-350
45-55
Biscuits
4
350-375
9-14
Muffins
4
400
15-19
Frozen
4
375-425
23-26
Fresh
4
400-425
12-15
Food Item
Cake
Pie
Cookies
Breads
Pizza
* The convection bake temperature is 25˚F less recommended on packages or recipes.
The temperature in this chart has been reduced 25˚F.
** Actual times depend on the mixes or recipes baked. Follow recipe or package
directions and reduce temperature appropriately.
24_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 24
2007-09-10 ¿ÀÈÄ 3:49:13
CONVECTION ROASTING
Convection roasting is good for cooking large tender cuts of meat, uncovered.
Heat comes from the top heating element. The convection fan circulates the heated air evenly
over and around the food. Meat and poultry are browned on all sides as if they were cooked on a
rotisserie. The heated air seals in juices quickly for a moist and tender product while, at the same
time, creating a rich golden brown exterior.
How to set the oven for convection roasting
1. Start the convection roasting mode.
04 OPERATING THE OVEN
Press the CONV. ROAST pad. The default temperature is 350°F.
2. Enter the temperature you want, eg. 400°F, by using the number
pad.
. Press the SET/START pad to begin convection roasting.
Conv. Roast and the adjusted oven temperature, eg. 375°F, will
appear in the display for 2 seconds.
The temperature display will start to change once the oven
temperature reaches 150°F.
A beep will sound 6 times when the adjusted oven temperature,
eg. 375°F, is reached and the display will show the auto-converted
oven temperature.
. Turn off or cancel convection roasting by pressing the CLEAR/
OFF pad.
In the convection roasting mode, the oven will automatically reduce the set regular baking
temperature by 25°F to the appropriate conversion temperature.
The convection oven fan shuts off when the oven door is opened.
DO NOT leave the door open for long periods of time while using convection cooking or
you may shorten the life of the convection heating element.
When you use the convection roasting feature, it is
important that you use the broil pan and insert. The
pan is used to catch grease spills and the grid is
used to prevent grease spatters.
Operating the oven _25
FTQ352IWX_XAC DG68-00106A.indb 25
2007-09-10 ¿ÀÈÄ 3:49:14
Recommended convection roasting guide
Roasting time*
(min per lb)
Internal temp. ( ˚F )
25-28
145 (med/rare)
28-32
160 (medium)
24-29
145 (med/rare)
27-34
160 (medium)
25-30
145 (med/rare)
28-35
160 (medium)
325
28-38
145 (med/rare)
5-8
350
15-25
170
3-6
350
20-30
160
3-4
375
17-23
180
Turkey,
unstuffed**
12-15
325
12-16
180
Turkey,
unstuffed**
16-20
325
11-15
180
Turkey,
unstuffed**
21-25
325
8-12
180
Turkey Breast
3-8
325
20-25
170
Cornish Hen
1-1½
350
45-75 (total time)
180
Half Leg
3-4
325
25-30
160 (medium)
30-35
170 (well)
Whole Leg
6-8
325
25-30
160 (medium)
30-35
170 (well)
Meat
Weight (lb)
Oven temp. ( ˚F )
Rib Roast
4-6
325
Rib Eye Roast,
(boneless)
4-6
325
Rump, Eye, Tip
Sirloin (boneless)
3-6
325
Tenderloin Roast
2-3
Loin Roast
(boneless or
bone-in)
Shoulder
Beef
Pork
Poultry
Chicken - whole
Lamb
* Roasting times are approximate and may vary depending on the shape of the meat.
The convection roast temperature is 25˚F less recommended on packages or recipes.
The temperature in this chart has been reduced 25˚F.
** Stuffed turkey requires additional roasting time. The minimum safe temperature for
stuffing in poultry is 165˚F.
26_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 26
2007-09-10 ¿ÀÈÄ 3:49:14
TIMED COOKING
In a timed cooking, the oven turns on immediately and cooks for the length of time you select. At
the end of the cooking time, the oven turns off automatically.
• You can use the timed cooking feature only with another cooking operation (bake, convection
bake, or convection roast).
• You can set the oven for a timed cooking before setting other cooking operations.
• The clock must be set for the correct time of day.
How to set the oven for timed cooking
04 OPERATING THE OVEN
1. Enter the set up.
Press the pad for the cooking operation you want, eg. BAKE. The
default temperature is 350°F.
2. Enter the temperature you want, eg. 375°F, by using the number
pad.
. Press the COOKING TIME pad.
. Enter the cooking time you want, eg. 45 min, by using the number
pad.
You can set the cooking time for any amount from 1 minute to 9
hours and 99 minutes.
5. Press the SET/START pad to begin cooking operation.
The temperature display will start to change once the oven
temperature reaches 150°F.
The oven will continue to cook until the set amount of time has
elapsed, then turn off automatically unless the keep warm feature
was set. (Refer to the section on the keep warm feature on page
33.)
. You can cancel a timed cooking at any time by pressing the
CLEAR/OFF pad.
Place food in the oven after preheating if the recipe calls for it. Preheating is important for
good results when baking cakes, cookies, pastry, and breads. After the oven has reached
the desired temperature, a long beep will sound 6 times.
CAUTION
Use caution with the timed cooking or delay timed cooking features. Use these
features when cooking cured or frozen meats and most fruits and vegetables. Foods
that can easily spoil, such as milk, eggs, fish, meat or poultry, should be chilled in the
refrigerator first. Even when chilled, they should not stand in the oven for more than
1 hour before cooking begins, and should be removed promptly when cooking is
completed. Eating spoiled food can result in sickness from food poisoning.
Operating the oven _2
FTQ352IWX_XAC DG68-00106A.indb 27
2007-09-10 ¿ÀÈÄ 3:49:14
DELAY TIMED COOKING
In a delay timed cooking, the oven’s timer turns the oven on and off at times you select in
advance.
• You can use the delay timed cooking feature only with another cooking operation (bake,
convection bake or convection roast).
• You can set the oven for a delay timed cooking before setting other cooking operations.
• The clock must be set for the correct time of day.
How to set the oven for delay timed cooking
1. Position the oven rack(s) and place the food in the oven.
2. Enter the set up.
Press the pad for the cooking operation you want, eg. BAKE. The
default temperature is 350°F.
. Use the number pads to enter the temperature you want, eg.
375°F.
. Press the COOKING TIME pad.
5. Enter the cooking time you want, eg. 45 min, by using the number
pad.
You can set the cooking time for any amount of time from 1 minute
to 9 hours and 99 minutes.
. Press the DELAy START pad.
“AM, PM” is not displayed in 24 hour mode.
. Select AM or PM.
Press the CLOCK AM/PM pad once to select AM or twice to
select PM.
This step is skipped in the 24-hour display mode.
. Enter the time you want the oven to turn on, eg. 4:30, by using the
number pad.
9. Press the SET/START pad.
At the set time, a short beep will sound. The oven will begin to
bake. When the oven has reached the desired temperature, a long
beep will sound 6 times and the oven lamp will flash.
Place food in the oven after preheating if the recipe calls for it. Preheating is important for
good results when baking cakes, cookies, pastry, and breads. After the oven has reached
the desired temperature, a long beep will sound 6 times.
2_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 28
2007-09-10 ¿ÀÈÄ 3:49:15
BROILING
Always operate broil mode with door closed.
CAUTION
Using the broil pan
The broil pan and the insert allow grease to drain and be
kept away from the high heat of the broiler.
• Do not use the pan without the insert.
CAUTION
Should an oven fire occur, close the oven door and turn the oven off. If the fire continues,
throw baking soda on the fire or use a foam-type fire extinguisher. Do not put water or
flour on the fire. Flour may be explosive and water can cause a grease fire to spread and
cause personal injury.
How to set the oven for broiling
04 OPERATING THE OVEN
• Do not cover the insert with foil; the exposed grease
could ignite.
1. Select the broil setting you want.
Press the BROIL pad once for HI or twice for LO.
Use LO to cook foods such as poultry or thick cuts of meat
thoroughly without over-browning them.
2. Start the broiling function.
Press the SET/START pad.
Broil on one side until food is browned; turn and cook on the other
side.
. Press the CLEAR/OFF pad once you have finished cooking or if
you want to cancel broiling.
Operating the oven _29
FTQ352IWX_XAC DG68-00106A.indb 29
2007-09-10 ¿ÀÈÄ 3:49:15
Recommended broiling guide
The size, weight, thickness, starting temperature, and your preference of doneness will affect
broiling times.
This guide is based on meats at refrigerator temperature.
Food
Ground Beef
Well Done
First
Quantity and/
Shelf
side time
or thickness position
(min.)
1 lb. (4 patties)
½ to ¾” thick
Second
side time
(min.)
Medium
Well Done
Rare
Medium
Well Done
Chicken
Lobster Tails
Fish Fillets
Ham Slices
(precooked)
Pork Chops
Well Done
Space evenly. Up to 8
patties may be broiled at
once.
7
8-10
4-6
7
8
3-5
7
10
4-6
7
12
5-7
6
14
7-9
Pan frying is
recommended.
6
16
8-11
6
19
11-13
Slash fat.
1 whole cut up
2 to 2½ lbs.,
split lengthwise
4
23-28
13-18
2 Breasts
5
Beef Steaks
Rare
Comments
1” thick
1 to 1½ lbs.
1½”thick
2 to 2½ lbs.
2–4
10 to 12 oz.
each
Steaks less than 1” thick
cook through before
browning.
Broil skin-side-down first.
13-18
5-10
Cut through back of shell.
Spread open.
4
14-18
Do not turn
Brush with melted butter
over.
before broiling and after
half of broiling time.
¼ to ½” thick
6
5-9
3-4
Handle and turn very
carefully. Brush with
lemon butter before and
during cooking, if desired.
½” thick
6
5-7
3-5
Increase time 5 to 10
minutes per side for 1½”
thick or home-cured ham.
2 (½” thick)
6
7
6-8
2 (1” thick)
about 1 lb.
Slash fat.
5
9-10
7-9
2 (1” thick)
about 10 to
12 oz.
6
6
4-6
6
8
7-9
2 (1½” thick)
about 1 lb.
6
11
9
6
13
9-11
2 (1” thick)
6
8
3-4
4 (1” thick)
about 1 lb.
6
9
4-6
Lamb Chops
Medium
Well Done
Medium
Well Done
Salmon
Steaks
Slash fat.
Grease pan. Brush steaks
with melted butter.
30_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 30
2007-09-10 ¿ÀÈÄ 3:49:16
USING THE CUSTOM COOK FEATURE
By using the custom cook feature, you can record up to 3 different recipe settings. The feature
may be used for baking, convection baking, or convection roasting. It will not work with any other
function, including the delay start feature.
How to record a recipe setting
1. Press the pad for the cooking operation you want to store, eg.
BAKE. The default temperature is 350°F.
2. Use the number pad to enter the temperature you want, eg.
375°F.
04 OPERATING THE OVEN
. Press the CUSTOM COOK pad the number of times
corresponding to where you want to store the setting, eg. for
recipe setting 2, press the CUSTOM COOK pad twice.
Recipe settings may be stored at 1, 2, or 3.
. Press the SET/START pad.
How to recall a setting
1. Press the CUSTOM COOK pad the number of times
corresponding to where the recipe setting is stored, eg. for recipe
setting 2, press the CUSTOM COOK pad twice.
Recipe settings may be stored at 1, 2, or 3.
2. Start the stored cooking operation.
Press the SET/START pad.
Operating the oven _1
FTQ352IWX_XAC DG68-00106A.indb 31
2007-09-10 ¿ÀÈÄ 3:49:16
PROOFING
The proofing feature maintains a warm environment useful for rising yeast-leavened products.
How to set the oven for proofing
1. Enter the proofing mode.
Press the PROOF pad.
2. Start the proofing function.
Press the SET/START pad.
The proofing feature automatically provides the optimum
temperature for the proof process, and therefore does not have a
temperature adjustment.
. Press the CLEAR/OFF pad at any time to turn off the proofing
feature.
• If you press the PROOF pad when the oven temperature is above 100˚F, Hot will appear
in the display. Because these functions produce the best results when started while
the oven is cool, we recommend that you wait until the oven has cooled down and Hot
disappears from the display.
• To avoid lowering the oven temperature and lengthening proofing time, do not open the
oven door unnecessarily.
• Check bread products early to avoid over-proofing.
• Do not use the proofing mode for warming food or keeping food hot. The proofing oven
temperature is not hot enough to hold foods at safe temperatures. Use the keep warm
feature to keep food warm.
• For best results, cover the dough with a cloth or with plastic wrap (the plastic may need
to be anchored underneath the container so the oven fan will not blow it off).
2_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 32
2007-09-10 ¿ÀÈÄ 3:49:17
USING THE KEEP WARM FUNCTION
The keep warm feature will maintain an oven temperature of 170°F. You should not use this feature
to reheat cold foods. The keep warm feature will keep cooked food warm for serving up to 3
hours after cooking has finished.
After 3 hours, the feature will shut the oven off automatically. The feature may be used without any
other cooking operations or may be set to activate after a timed or delay timed cooking operation.
How to use the keep warm feature
1. Press the KEEP WARM pad.
. Press the CLEAR/OFF pad at any time to turn the feature off.
How to set the oven to activate the keep warm mode after a timed
cooking
04 OPERATING THE OVEN
2. Press the SET/START pad.
1. Press the KEEP WARM pad during a cooking operation, eg.
baking.
The oven is now programmed to activate the keep warm mode
automatically after completing the cooking operation.
2. Press the CLEAR/OFF pad at any time to turn the feature off.
TURNING THE OVEN LIGHT ON AND OFF
• The oven light turns on automatically when the door is opened.
• The oven light turns off automatically when the door is closed.
• You can turn the oven light on and off manually by pressing the OVEN LIGHT pad.
• The oven light will not turn on during a self-cleaning cycle.
Operating the oven _
FTQ352IWX_XAC DG68-00106A.indb 33
2007-09-10 ¿ÀÈÄ 3:49:17
EXTRA FEATURES
12 hour energy saving
With this feature, should you forget and leave the oven on, the control will automatically turn off
the oven after 12 hours during baking functions or after 3 hours during a broil function.
How to turn 12 hour energy saving feature on or off
1. Press COOKING TIME and 0 on the number pad at the same
time for 3 seconds.
The display will show 12 Hr (12 hour shut-off) or -- Hr (no shutoff).
The default is 12 Hr.
2. Press 0 on the number pad to select OFF or ON.
Pressing 0 on the number pad changes the mode between 12 Hr
and -- Hr.
. Press the SET/START pad..
Fahrenheit or Celsius temperature selection
The oven control can be programmed to display temperatures in Fahrenheit or Centigrade. The
oven has been preset at the factory to display in Fahrenheit.
How to change the display from Fahrenheit to Centigrade or from Centigrade
to Fahrenheit
1. Press BROIL and 0 on the number pad at the same time for 3
seconds.
The display shows F (Fahrenheit) or C (Centigrade).
The default is F.
2. Press 0 on the number pad to select F or C.
Pressing 0 on the number pad changes the display between F and
C.
. Press the SET/START pad.
_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 34
2007-09-10 ¿ÀÈÄ 3:49:17
Convection auto conversion feature
When using convection bake, the convection auto conversion feature will automatically convert
entered regular baking temperatures to convection baking temperatures.
This feature is activated so that the display will show the actual converted (reduced) temperature.
For example, if you enter a regular recipe temperature of 350°F and press the Set/Start pad, the
display will show the converted temperature of 325°F.
How to disable or enable the auto conversion feature
1. Press CONV. BAKE and 0 on the number pad at the same time
for 3 seconds.
04 OPERATING THE OVEN
The display will show Con On (enabled) or Con OFF (disabled).
The default setting is Con On.
2. Press 0 on the number pad to select Con On or Con OFF.
Pressing 0 on the Number pad changes the mode between Con
On and Con OFF.
. Press the SET/START pad.
Thermostat adjustment
The temperature in the oven has been preset at the factory. When first using the oven, be sure to
follow recipe times and temperatures. If you think the oven is too hot or too cool, the temperature
in the oven can be adjusted. Before adjusting, test a recipe by using a temperature setting that is
higher or lower than the recommended temperature. The baking results should help you to decide
how much of an adjustment is needed.
The oven temperature can be adjusted ±35°F (±19°C ).
How to adjust the oven temperature
1. Press BAKE and 0 on the number pad at the same time for 3
seconds.
The display will show AdJ 0.
2. Enter the adjustment you want, eg. 20°F, by using the number
pad.
You can adjust the temperature to lower than the factory setting by
pressing the BAKE pad.
. Press the SET/START pad.
This adjustment will not affect the broiling or the self-cleaning temperatures. The adjustment
will be retained in memory after a power failure.
Operating the oven _5
FTQ352IWX_XAC DG68-00106A.indb 35
2007-09-10 ¿ÀÈÄ 3:49:18
Sound on/off
By using this feature, you can set the oven controls to operate silently.
How to turn the sound on or off
1. Press Oven Light and 0 on the number pad at the same time for
3 seconds.
The display will show Snd On (sound on) or Snd OFF (sound off).
The default setting is Snd On.
2. Press 0 on the number pad to select OFF or ON.
Pressing 0 on the number pad changes the mode between Snd
On and Snd OFF.
. Press the SET/START pad.
Control lockout
This feature will allow you to lock the buttons on the touch pad so they cannot be activated
accidentally.
How to activate the control lockout feature
1. Press the CLEAR/OFF pad for 3 seconds.
The display will show Loc and an icon of a lock continuously and
the time of day if not blacked out.
All functions must be cancelled before the control lockout is
activated.
This function is available under 400°F.
How to unlock the controls
1. Press the CLEAR/OFF pad for 3 seconds.
Loc and the lock icon will disappear from the display.
_ Operating the oven
FTQ352IWX_XAC DG68-00106A.indb 36
2007-09-10 ¿ÀÈÄ 3:49:18
Setting the Sabbath
(For use on the Jewish Sabbath & Holidays)
The Sabbath feature can be used with baking only. The oven temperature may be set higher
or lower after setting the Sabbath feature (the oven temperature adjustment feature should be
used only during Jewish holidays). The display, however, will not change and tones will not sound
when a change occurs. Once the oven is properly set for baking with the Sabbath feature active,
the oven will remain continuously on until cancelled. This will override the factory preset 12 hour
energy saving feature. If the oven light is needed during the Sabbath, press the OVEN LIGHT pad
before activating the Sabbath feature. Once the oven light is turned on and the Sabbath feature is
active, the oven light will remain on until the Sabbath feature is turned off. If the oven light needs to
be off, be sure to turn the oven light off before activating the Sabbath feature.
04 OPERATING THE OVEN
How to use the Sabbath feature
1. Press the BAKE pad.
The default temperature is 350°F.
2. Enter the temperature you want, eg. 375°F, by using the number
pad.
. Press the SET/START pad.
The temperature display will start to change once the oven
temperature reaches 150°F.
. Press the CLOCK AM/PM and the KITCHEN TIMER ON/OFF
pads at the same time for 3 seconds.
The display will show SAb.
Once SAb appears in the display, the oven control will no longer
beep or display any further changes.
You may change the oven temperature once baking has started.
Remember that the oven control will no longer beep or display any
further changes once the Sabbath feature.
5. You can turn the oven off at any time by pressing the CLEAR/OFF
pad. This will turn only the oven off. If you want to deactivate the
Sabbath feature, hold down the CLOCK AM/PM and KITCHEN
TIMER ON/OFF pads at the same time for 3 seconds. Sab will
disappear from the display.
It is not advised to attempt to activate any other program feature except BAKE while the
Sabbath feature is active. ONLY the following key pads will function correctly with the
Sabbath feature: NUMBER, BAKE, SET/START and CLEAR/OFF pad. ALL OTHER
KEyPADS should not be used once the Sabbath feature is activated.
Operating the oven _
FTQ352IWX_XAC DG68-00106A.indb 37
2007-09-10 ¿ÀÈÄ 3:49:19
maintaining your appliance
SELF-CLEANING
A self-cleaning oven uses high temperatures (well above cooking temperatures) to burn off leftover
grease and residue completely or reduce them to a finely powdered ash that you can wipe away
with a damp cloth.
CAUTION
• During the self-cleaning cycle, the outside of the range can become very hot to touch.
Do not leave small children unattended near the appliance.
• The health of some birds is extremely sensitive to the fumes given off during the selfcleaning cycle of any range. Move birds to another well-ventilated room.
• Do not line the oven walls, racks, bottom or any other part of the range with
aluminum foil. Doing so will result in poor heat distribution, produce poor baking
results and cause permanent damage to the oven interior (aluminum foil will melt to
the interior surface of the oven).
• Do not force the oven door open. This can damage the automatic door locking
system. Use care when opening the oven door after the self-cleaning cycle is
complete. Stand to the side of the oven when opening the door to allow hot air or
steam to escape. The oven may still be VERy HOT.
Before a self-cleaning cycle
• We recommend venting your kitchen with an open window
or using a ventilation fan or hood during the self-cleaning
cycle.
Fig. 1
• Remove the wire rack, broil pan, broil pan insert, all
cookware and any aluminum foil from the oven.
• Wipe up debris from the oven bottom. (Fig. 1)
• The silver-colored oven racks can be self-cleaned, but they
will darken, lose their luster and become hard to slide.
Fig. 2
Don’t hand
clean the
oven door
gasket.
You may
hand clean
the door.
• Residue on the front frame of the range and outside the
gasket on the door will need to be cleaned by hand. Clean
these areas with hot water, soap-filled steel-wool pads or
cleansers such as Soft Scrub. Rinse well with clean water
and dry.
• Do not clean the gasket. The fiberglass material of the oven
door gasket cannot withstand abrasion. It is essential for
the gasket to remain intact. If you notice it becoming worn
or frayed, replace it. (Fig. 2)
• Make sure the oven light bulb cover is in place and the
oven light is off.
The health of some birds is extremely sensitive to the fumes given off during the selfcleaning cycle of any range. Move birds to another well ventilated room.
_ Maintaining your appliance
FTQ352IWX_XAC DG68-00106A.indb 38
2007-09-10 ¿ÀÈÄ 3:49:19
How to set the oven for self-cleaning
1. Select the length of time for the self-cleaning operation, eg. 3
hours.
Press the SELF CLEAN pad once for a 3 hour clean time, twice
for a 4 hour clean time, or 3 times for a 2 hour clean time.
The default setting is 3 hours.
2. Start the self-cleaning cycle.
Press the SET/START pad. The motor-driven door lock will
engage automatically.
• The oven door locks automatically. The display will show the clean time remaining. It
is not be possible to open the oven door until the temperature drops to a safe/cool
temperature.
• The self-cleaning feature will not operate when a surface element is on. If a surface
element gets turned on during a self-cleaning cycle, the cycle will turn off automatically.
How to delay the start of self-cleaning
1. Press the SELF CLEAN pad.
Select the desired self-clean time by pressing SELF CLEAN pad.
2. Press the DELAy START pad.
05 MAINTAINING YOUR APPLIANCE
• You will not be able to start a self-cleaning cycle if the control lockout feature is activated
or if the oven’s temperature is too hot.
. Using the CLOCK AM/PM and number pads, enter the time you want the clean cycle to start.
. Press the SET/START pad.
The display will show Delay, Self clean and Lock icon. And the motor-driven door lock will
engage automatically.
5. Self-Cleaning cycle will turn on automatically at the set time.
How to turn off the self-cleaning feature
You may find it necessary to stop or interrupt a self-cleaning cycle due to excessive smoke or fire
in the oven. (When the self-cleaning cycle is done, End will show in the display and a beep will
sound 6 times.)
1. Press the CLEAR/OFF pad.
2. You will be able to open the oven door once the oven has cooled down for approximately 1
hour.
After a self-cleaning cycle
• You may notice some white ash in the oven. Wipe it up with a damp cloth after the oven cools.
(If white spots remain, remove them with a soap-filled steel wool pad and rinse thoroughly with
a vinegar and water mixture.)
• If the oven is not clean after one cycle, repeat the cycle.
• You cannot set the oven for cooking until the oven is cool enough for the door to unlock.
Maintaining your appliance _9
FTQ352IWX_XAC DG68-00106A.indb 39
2007-09-10 ¿ÀÈÄ 3:49:20
STEAM-CLEANING
How to set the oven for steam-cleaning
Steam-cleaning saves time and energy for light cleaning. For heavier-duty cleaning of debris and
grease, use the self-cleaning function.
1. Remove all accessories from the oven.
2. Pour approximately 10 oz. (300 ml) of water onto the bottom of
the empty oven and close the oven door.
Use normal water only, no distilled water.
. Press the STEAM CLEAN pad.
. Press the SET/START pad.
When the operation is complete, the display will blink and a beep
will sound.
5. Press the CLEAR/OFF pad.
. Clean the oven’s interior.
There will be a significant amount of water remaining on the
bottom of the oven after a steam-cleaning cycle. Remove the
residual water with a sponge or soft dry cloth.
When steam-cleaning, use exactly 10 oz. of water since this produces the best results.
If you press the STEAM CLEAN pad when the oven temperature is above 100˚F, Hot will
appear in the display. Because these functions produce the best results when started while
the oven is cool, we recommend that you wait until the oven has cooled down and Hot
disappears from the display.
After a steam-cleaning cycle
• Take care when opening the door before a steam-cleaning procedure has ended; the water on
the bottom is hot.
• Open the oven door and remove the remaining water with a sponge. Do not leave the residual
water in the oven for any length of time. Wipe the oven clean and dry with a soft cloth (do not
forget to wipe under the oven door seal).
• Use a detergent-soaked sponge, a soft brush, or a nylon scrubber to wipe the oven interior.
Remove stubborn residue with a nylon scourer. You can remove lime deposits with a cloth
soaked in vinegar.
• If the oven remains dirty, you can repeat the procedure once the oven has cooled.
• For heavy residue, such as grease left over from roasting, we recommend that you rub
detergent into the residue before activating the steam-cleaning function.
• After cleaning, leave the oven door ajar at a 15° angle to allow the interior enamel surface to dry
thoroughly.
0_ Maintaining your appliance
FTQ352IWX_XAC DG68-00106A.indb 40
2007-09-10 ¿ÀÈÄ 3:49:20
CARE AND CLEANING OF THE OVEN
WARNING
• Be sure all controls are OFF and all surfaces are COOL before cleaning any
part of the range.
• If your range is removed for cleaning, servicing or
any reason, be sure the Anti-Tip device is re-engaged
properly when the range is replaced. Failure to take
this precaution could result in tipping of the range and
cause injury.
Oven vent
• The oven vent is located above the
right rear surface unit.
• This area could become hot during
oven use.
• It is normal for steam to come out
of the vent.
• The vent is important for proper air
circulation. Never block this vent.
Cleaning painted parts and decorative trim
05 MAINTAINING YOUR APPLIANCE
Oven vent
• For general cleaning, use a cloth with hot and soapy water.
• For more difficult residue and built-up grease, apply a liquid detergent directly onto the area and
leave for 30 to 60 minutes. Wipe with a damp cloth and dry. Do not use abrasive cleaners on
any of these surfaces; they can scratch.
Cleaning stainless steel surfaces
1. Shake the bottle of Stainless Steel Appliance Cleaner or polish well.
2. Place a small amount of stainless steel appliance cleaner or polish on a damp cloth or damp
paper towel.
3. Clean a small area, rubbing with the grain of the stainless steel if applicable.
4. Dry and buff with a clean, dry paper towel or soft cloth.
5. Repeat as necessary.
• Do not use a steel-wool pad; it will scratch the surface.
• If a mineral oil-based stainless steel appliance cleaner has been used before to clean
the appliance, wash the surface with dishwashing liquid and water prior to using the
Stainless Steel Appliance Cleaner or polish.
Maintaining your appliance _1
FTQ352IWX_XAC DG68-00106A.indb 41
2007-09-10 ¿ÀÈÄ 3:49:21
Cleaning the broil pan and insert
• Do not attempt to clean the broil pan or insert by
leaving it in the oven during a self-cleaning cycle.
• After broiling, remove the broil pan from the oven.
Remove the insert from the pan. Carefully pour out the
grease from the pan into a proper container.
• Wash and rinse the broil pan and grid in hot water
with a soap-filled scouring pad.
• Soaking the pan will remove burned-on foods.
• Both the broil pan and insert may be cleaned with a
commercial oven cleaner and are dishwasher-safe.
• Do not store a soiled broil pan and insert
anywhere in the range.
Oven racks
• If the racks are left in the oven during a self-cleaning cycle, their color will turn slightly blue and
the finish will be dull. After the self-cleaning cycle is complete and the oven has cooled, rub the
sides of the racks with wax paper or a cloth containing a small amount of oil. This will help the
racks glide more easily into their tracks.
Oven door
Don’t hand
clean the
oven door
gasket.
You may
hand clean
the oven
door.
• Use soap & water to thoroughly clean the top, sides,
and front of the oven door. Rinse well. You may use a
glass cleaner on the outside glass of the oven door. DO
NOT immerse the door in water. DO NOT spray or
allow water or the glass cleaner to enter the door
vents. DO NOT use oven cleaners, cleaning powders,
or any harsh abrasive cleaning materials on the outside
of the oven door.
• DO NOT clean the oven door gasket. The oven
door gasket is made of a woven material which is
essential for a good seal. Care should be taken not to
rub, damage or remove this gasket.
2_ Maintaining your appliance
FTQ352IWX_XAC DG68-00106A.indb 42
2007-09-10 ¿ÀÈÄ 3:49:21
CARE AND CLEANING OF THE GLASS COOKTOP
Normal daily use cleaning
Use only a ceramic cooktop cleaner or the cleaner supplied with this appliance on the glass
cooktop. Other creams may not be as effective.
By following these steps, you can maintain and protect the surface of your glass cooktop.
1. Before using the cooktop for the first time, clean it with a ceramic cooktop cleaner or the
included cleaner. This helps protect the top and makes cleanup easier.
2. Daily use of a ceramic cooktop cleaner or the included cleaner will help keep the cooktop
looking new.
4. Use a paper towel or a cleaning pad for ceramic cooktops to clean the entire cooktop surface.
5. Use a dry cloth or paper towel to remove all cleaning residue. No need to rinse.
WARNING
DAMAGE to your glass surface may occur if you use scrub pads other than those
recommended.
Removing burned-on residue
1. Allow the cooktop to cool.
2. Spread a few drops of ceramic cooktop cleaner
on the entire burned residue area.
05 MAINTAINING YOUR APPLIANCE
3. Shake the cleaning cream well. Apply a few drops of cleaner directly to the cooktop.
. Using the included cleaning pad for ceramic
cooktops, rub the residue area, applying pressure
as needed.
. If any residue remains, repeat the steps listed
above as needed.
5. For additional protection, after all residue has been
removed, polish the entire surface with ceramic
cooktop cleaner and a paper towel.
Removing heavy, burned-on residue
1. Allow the cooktop to cool.
2. Use the single-edge razor-blade scraper at
approximately a 45° angle against the glass
surface and scrape the soil. It will be necessary to
apply pressure in order to remove the residue.
. After scraping with the razor scraper, spread a few
drops of ceramic cooktop cleaner on the entire
burned residue area. Use the included cleaning
pad to remove any remaining residue. (Do not
scrape the seal.)
. For additional protection, after all residue has
been removed, polish the entire surface with the
included cooktop cleaner and a paper towel.
Maintaining your appliance _
FTQ352IWX_XAC DG68-00106A.indb 43
2007-09-10 ¿ÀÈÄ 3:49:22
Removing metal marks and scratches
1. Be careful not to slide pots and pans across your cooktop. It will leave marks on the cooktop
surface. You can remove these marks by applying ceramic cooktop cleaner or the included
cleaner with a cleaning pad for ceramic cooktops.
2. If pots with a thin overlay of aluminum or copper are allowed to boil dry, the overlay may leave
black discoloration on the cooktop. You should remove this discoloration immediately or it may
become permanent.
WARNING
Carefully check the bottoms of pans for roughness that may scratch the cooktop.
Cleaning the cooktop seal
To clean the seal around the edges of the glass, lay a
wet cloth on it for a few minutes, then wipe clean with
a nonabrasive cleaner.
Potential for permanent damage to the glass surface
• Sugary spillovers (such as jellies, fudge, candy, syrups) or melted plastics can cause pitting
of the surface of your cooktop. This is not covered under the warranty. You should clean the
spill while it is still hot. Take special care when removing hot substances. Refer to the following
section.
• When using a scraper, be sure it is new and the razor blade is still sharp; do not use a dull or
nicked blade.
Cleaning sugary spills and melted plastic
1. Turn off all surface units. Remove hot pans.
2. Wearing an oven mitt, use a single-edge razor-blade scraper to move the spill to a cool area of
the cooktop. Remove the spill with paper towels.
3. Any remaining spillover should be left until the surface of the cooktop has cooled.
4. Don’t use the surface units again until all of the residue has been completely removed.
If pitting or indentation in the glass surface has already occurred, the cooktop glass will
have to be replaced. In this case, service will be necessary.
_ Maintaining your appliance
FTQ352IWX_XAC DG68-00106A.indb 44
2007-09-10 ¿ÀÈÄ 3:49:22
REMOVING AND REPLACING THE OVEN DOOR
How to remove the door
• The door is very heavy. Be careful when removing and lifting the door. Do not lift the
door by the handle.
CAUTION
• Turn the power OFF before removing the door.
1. Open the door completely.
2. Pull the hinge locks down toward the door frame to the unlocked position.
Locked position
Unlocked position
3. Firmly grasp both sides of the door at the top.
4. Close the door to the door removal position, which is approximately 5 degrees from vertical
(Fig. 1).
5. Lift door up and out until the hinge arm is clear of the slot (Fig. 2).
05 MAINTAINING YOUR APPLIANCE
Hinge lock
about 5°
Fig. 1
Fig. 2
How to replace the door
1. Firmly grasp both sides of the door at the top.
2. With the door at the same angle as the removal position, slide the indentation of the hinge arm
into the bottom edge of the hinge slot. The notch in the hinge arm must be fully inserted into
the bottom of the slot.
Hinge arm
Bottom
edge of slot
Indentation
Maintaining your appliance _5
FTQ352IWX_XAC DG68-00106A.indb 45
2007-09-10 ¿ÀÈÄ 3:49:24
3. Open the door fully. If the door will not open fully, the indentation is not inserted correctly in the
bottom edge of the slot.
4. Push the hinge locks up against the front frame of the oven cavity to the locked position.
Hinge lock
Unlocked position
Locked position
5. Close the oven door.
REMOVING AND REPLACING THE WARMING DRAWER
CAUTION
Turn the power OFF before removing the warming drawer.
How to remove the warming drawer
1. Open the drawer to the fully opened position.
2. Locate the glide lever on each side of the drawer; push down on the left glide lever and pull up
on the right glide lever.
Lever
Push down on the left guide
Lever
Pull up on the right guide
3. Pull the warming drawer away from the range.
How to replace the warming drawer
1. Replace the shield on the right glide of the drawer body.
2. Pull the bearing glides to the front of the chassis glide.
3. Align the glide on each side of the drawer with the glide slots on the range.
4. Push the drawer into the range until levers click (approximately 2 inches). Pull the drawer open
again to seat bearing glides into position. If you do not hear the levers click or the bearing
glides do not feel seated, remove the drawer and repeat steps 1-This will minimize possible
damage to the bearing glides.
_ Maintaining your appliance
FTQ352IWX_XAC DG68-00106A.indb 46
2007-09-10 ¿ÀÈÄ 3:49:25
CHANGING THE OVEN LIGHT
The oven light is a standard 40-watt appliance bulb. It will come on when the oven door is open.
When the oven door is closed, press the OVEN LIGHT pad to turn it on or off. It will not work
during a self-cleaning cycle.
1. Make sure the oven and the bulb are cool.
2. Unplug the range or disconnect power.
3. Turn the glass bulb cover in the back of the oven counterclockwise to remove.
4. Turn the bulb counterclockwise to remove it from its socket.
Glass bulb cover
Bulb
5. Replace the light bulb and glass bulb cover by turning them clockwise.
6. Plug in the range or reconnect power.
CAUTION
Before changing your oven light bulb, disconnect the electrical power to the range at the
main fuse or circuit breaker panel. Make sure the oven and the bulb are cool.
05 MAINTAINING YOUR APPLIANCE
Remove Replace
Maintaining your appliance _
FTQ352IWX_XAC DG68-00106A.indb 47
2007-09-10 ¿ÀÈÄ 3:49:26
troubleshooting
Troubleshooting
Samsung works hard to ensure that you don’t have problems with your new electric range. If you run into
unexpected trouble, look first for a solution in the table below. If, after trying the suggested solution, you’re
still having trouble, call Samsung at 1-800-SAMSUNG (1-800-726-7864).
PROBLEM
The range is not
level.
POSSIBLE CAUSE
The appliance has been installed
improperly.
The floor is sagging or sloping.
The appliance
must be accessed
for servicing and
cannot be moved
easily.
The oven control
beeps and displays
an F error code.
The surface units
will not maintain
a rolling boil or
will not cook fast
enough.
The surface units
will not turn on.
The surface unit
stops glowing when
changed to a lower
setting.
SOLUTION
• Place the oven rack in the center of the
oven. Place a level on the oven rack.
Adjust the leveling legs at the base of the
range until the oven rack is level.
• Insure the floor is level and strong and
stable enough to adequately support the
range.
• Contact a carpenter to correct the
situation.
• Insure the cabinets are square and provide
sufficient room for installation.
The kitchen cabinets are not
properly aligned and make the
range appear to be not level.
The kitchen cabinets are not
• Contact a builder or installer to make the
square and built too tightly in to the
appliance accessible.
appliance.
The carpet is interfering with
• Provide sufficient space so the range can
movement of the range.
be lifted over the carpet.
You have a function error code.
• Press the CLEAR/OFF pad and restart
the oven. If the problem persists,
CODE
CAUSE
disconnect all power to the range for at
-SE- Shorted key
least 30 seconds and then reconnect the
power. If this does not solve the problem,
E-27 oven sensor opened
call for service.
E-28 Oven sensor shorted
E-08 Oven heating error
E-0A Oven heating over
E-0E Door locking error
Improper cookware is being used.
• Use pans which are flat and match the
diameter of the surface unit selected.
In some areas, the power (voltage) • Cover the pan with a lid until the desired
may be low.
heat is obtained.
A fuse in your home may be blown • Replace the fuse or reset the circuit
or the circuit breaker tripped.
breaker.
The cooktop controls are set
• Check to see the correct control is set for
improperly.
the surface unit you are using.
This is normal. The unit is still on and hot.
48_ Troubleshooting
FTQ352IWX_XAC DG68-00106A.indb 48
2007-09-10 ¿ÀÈÄ 3:49:26
PROBLEM
POSSIBLE CAUSE
Areas of
Food spillover was not cleaned.
discoloration on the
cooktop
The surface is hot and the model
features a light-colored cooktop.
The appliance will
not turn on.
• Make sure the electrical plug is inserted
into a live, properly grounded outlet.
• Replace the fuse or reset the circuit
breaker.
• See the chapter on operating the oven.
• Allow the oven to cool.
The appliance is not completely
• Make sure the power cord is plugged into
plugged into the electrical outlet or
a live, properly grounded outlet. Check the
a fuse in your home may be blown
fuse and circuit breakers.
or the circuit breaker tripped.
Incomplete service wiring.
• Call for service.
Power outage.
The oven light will
not turn on.
Oven smokes
excessively during
broiling.
• Check to see if the house lights will turn
on. If required, call your local electric
company for service.
The light bulb is loose or defective. • Tighten or replace the bulb.
The switch operating light is
broken.
The control has not been set
properly.
The meat has been placed too
close to the element.
The meat has not been properly
prepared.
The insert on the broiler pan has
been positioned upside down,
preventing the grease from
draining.
Grease has built up on oven
surfaces.
Food does not bake The oven controls have not been
or roast properly.
set correctly.
The oven rack has been positioned
incorrectly or is not level.
Incorrect cookware or cookware of
improper size being used.
The oven sensor needs to be
adjusted.
06 TROUBLESHOOTING
The surface unit
This is normal.
frequently cycles on
and off.
The oven will not
The range is not completely
turn on.
plugged into the electrical outlet.
A fuse in your home may be blown
or the circuit breaker tripped.
The oven controls have been set
improperly.
The oven is too hot.
SOLUTION
• Refer to the section on care and cleaning
of the glass cooktop on page 43.
• This is normal. The surface may appear
discolored when it is hot. This is temporary
and will disappear as the glass cools.
• The element will cycle on and off to
maintain the heat setting.
• Call for service.
• Refer to the section on setting oven
controls.
• Reposition the rack to provide proper
clearance between the meat and the
element. Preheat the broil element for
searing.
• Remove the excess fat from the meat. Cut
away fatty edges that may curl, leaving the
lean intact.
• Position the insert on the pan so that
the ribs are up and the slots are down,
allowing the grease to drip into the pan.
• Regular cleaning is necessary when
broiling frequently.
• See the chapter on operating the oven.
• See the section on using the oven racks
on page 21.
• See the section on adjusting the
thermostat on page 35.
Troubleshooting _49
FTQ352IWX_XAC DG68-00106A.indb 49
2007-09-10 ¿ÀÈÄ 3:49:26
PROBLEM
Food does not broil
properly.
The oven
temperature is too
hot or too cold.
Scratches or
abrasions on
cooktop surface
Brown streaks or
specks
Areas of
discoloration with
metallic sheen
The oven will not
self-clean.
“Crackling” or
“popping” sound
Excessive smoking
during a selfcleaning cycle
The oven door will
not open after a
self-cleaning cycle.
POSSIBLE CAUSE
The oven controls have been set
incorrectly.
The rack has not been properly
positioned.
Cookware not suited for broiling.
SOLUTION
• Press the BROIL pad.
• See the broiling guide on page 30.
• Use suitable cookware.
Aluminum foil used on the broiling • See the section on broiling on page 29.
pan and grid has not been fitted
properly and slit as recommended.
In some areas the power (voltage) • Preheat the broil element for 10 minutes.
may be low.
• See the broiling guide on page 30.
The oven sensor needs to be
• See the section on adjusting the
adjusted.
thermostat on page 35.
The cooktop is being cleaned
improperly.
• Scratches are not removable. Tiny
scratches will become less visible in time
as a result of cleaning.
• To avoid scratches, use the recommended
cleaning procedures. Make sure bottoms
of cookware are clean before use, and use
cookware with smooth bottoms.
Cookware with rough bottoms
were used on the cooktop or
there were coarse particles (eg.
salt or sand) present between the
cookware and the surface of the
cooktop.
Cookware has been slid across the
cooktop surface.
Boilovers have been cooked onto • Use the blade scraper to remove soil.
the surface.
• See the section on care and cleaning of
the glass cooktop on page 43.
Mineral deposits from water and
• Remove using a ceramic-glass cooktop
food have been left on the surface
cleaning cream.
of the cooktop.
• Use cookware with clean, dry bottoms.
The oven temperature is too high
• Allow the range to cool and reset the
to set a self-clean operation.
controls.
The oven controls have been set
• See the section on self-cleaning on page
incorrectly.
38.
A self-cleaning cycle cannot be started if the oven lockout feature has been
activated or if a radiant surface element is on.
This is the sound of the metal
• This is normal.
heating and cooling during
both the cooking and cleaning
functions.
There is excessive soiling in the
• Press the CLEAR/OFF pad. Open the
oven.
windows to rid the room of smoke. Wait
until the self-cleaning cycle is cancelled.
Wipe up the excessive soil and reset the
oven for self-cleaning.
The oven is too hot.
• Allow the oven to cool.
50_ Troubleshooting
FTQ352IWX_XAC DG68-00106A.indb 50
2007-09-10 ¿ÀÈÄ 3:49:26
PROBLEM
POSSIBLE CAUSE
Oven not clean after The oven controls were not set
a self-cleaning cycle correctly.
The oven was heavily soiled.
Strong odor
Fan noise
Oven racks are
difficult to slide.
Display goes blank.
Display flashes.
Drawer does not
slide smoothly or
drags.
• To speed the process, set a self-cleaning
cycle for a minimum of 3 hours.
• See the section on self-cleaning on page
38.
An odor from the insulation around • This is temporary.
the inside of the oven is normal
for the first few times the oven is
used.
A convection fan may automatically • This is normal.
turn on and off.
The shiny, silver-colored racks
• Apply a small amount of vegetable oil to
were cleaned in a self-cleaning
a paper towel and wipe the edges of the
cycle.
oven racks with the paper towel.
A fuse in your home may be blown • Replace the fuse or reset the circuit
or the circuit breaker tripped.
breaker.
There was a power failure.
• Reset the clock.
06 TROUBLESHOOTING
Steam from the vent When using the convection
feature, it is normal to see steam
coming out of the oven vent.
As the number of racks or amount
of food being cooked increases,
the amount of visible steam will
increase.
Burning or oily odor This is normal in a new oven and
emitting from the
will disappear in time.
vent
SOLUTION
• See the section on self-cleaning on page
38.
• Wipe up heavy spillovers before starting
the self-cleaning cycle. Heavily soiled
ovens may need to self-clean again or for
a longer period of time.
• This is normal.
The drawer is out of alignment.
• Fully extend the drawer and push it all the
way in. See the page 46.
The drawer is over-loaded or the
• Reduce weight. Redistribute drawer
load is unbalanced.
contents.
Warming drawer will A fuse in your home may be blown • Replace the fuse or reset the circuit
not work.
or the circuit breaker tripped.
breaker.
The controls are not set correctly.
Excessive
There is liquid present in the
condensation in the drawer.
drawer
Uncovered foods.
The temperature is set too high.
Food dries out in
Moisture is escaping.
the warming drawer. The drawer is not fully closed.
• See the chapter on using the warming
drawer on page 16.
• Remove the liquid.
• Cover food with a lid or aluminum foil.
• Adjust the temperature to a lower setting.
• Cover food with a lid or aluminum foil.
• Push the drawer in until the latch engages.
Troubleshooting _51
FTQ352IWX_XAC DG68-00106A.indb 51
2007-09-10 ¿ÀÈÄ 3:49:27
warranty
PLEASE DO NOT DISCARD THIS REPLACES THE WARRANTY PAGE IN THE USE & CARE GUIDE
SAMSUNG ELECTRIC RANGE
LIMITED WARRANTY TO ORIGINAL PURCHASER
This SAMSUNG brand product, as supplied and distributed by SAMSUNG ELECTRONICS CANADA INC. (SAMSUNG) and delivered
new, in the original carton to the original consumer purchaser, is warranted by SAMSUNG against manufacturing defects in materials
and workmanship for a limited warranty period of:
One (1) Year Parts and Labor, Five (5) Years Parts Warranty
For Glass Cooktop and Radiant Surface Unit
During this limited additional four-year warranty, you will responsible for any labor or in-home service.
This limited warranty begins on the original date of purchase, and is valid only on products purchased and used in Canada. To receive
warranty service, the purchaser must contact SAMSUNG for problem determination and service procedures. Warranty service can only
be performed by a SAMSUNG authorized service center, and any unauthorized service will void this warranty. The original dated bill
of sale must be presented upon request as proof of purchase to SAMSUNG or SAMSUNG’s authorized service center. Samsung will
provide in-home service during the one (1) year warranty period at no charge subject to availability within Canada. In home service is
not available in all areas. To receive in home service product must be unobstructed and accessible to the service agent. If service is not
available Samsung may elect to provide transportation of the product to and from an authorized service center.
SAMSUNG will repair or replace this product, at our option and at no charge as stipulated herein, with new or reconditioned parts
or products if found to be defective during the limited warranty period specified above. All replaced parts and products become the
property of SAMSUNG and must be returned to SAMSUNG. Replacement parts and products assume the remaining original warranty,
or ninety (90) days, whichever is longer.
This limited warranty shall not cover cases of incorrect electric current, voltage or supply, light bulbs, house fuses, house wiring, cost of
a service call for instructions, or fixing installation errors. Furthermore, damage to the glass cooktop caused by the use of cleaners other
than the recommended cleaners and pads, damage to the glass cook top caused by hardened spills of sugary materials or melted plastic
that are not cleaned according to the directions in the use and care guide are not covered. SAMSUNG does not warrant uninterrupted
or error-free operation of the product.
EXCEPT AS SET FORTH HEREIN THERE ARE NO WARRANTIES OR CONDITIONS ON THIS PRODUCT EITHER EXPRESS OR
IMPLIED AND SAMSUNG DISCLAIMS ALL WARRANTIES AND CONDITIONS INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED
WARRANTIES AND CONDITIONS OF MERCHANTABILITY, INFRINGEMENT OR FITNESS FOR A PARTICULAR PURPOSE. NO
WARRANTY OR GUARANTY GIVEN BY ANY PERSON, FIRM OR CORPORATION WITH RESPECT TO THIS PRODUCT SHALL BE
BINDING ON SAMSUNG. SAMSUNG SHALL NOT BE LIABLE FOR LOSS OF REVENUE OR PROFITS, FAILURE TO REALIZE SAVINGS
OR OTHER BENEFITS, OR ANY OTHER GENERAL, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES CAUSED
BY THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT, REGARDLESS OF THE LEGAL THEORY ON WHICH THE CLAIM IS
BASED, AND EVEN IF SAMSUNG HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOR SHALL RECOVERY OF
ANY KIND AGAINST SAMSUNG BE GREATER IN AMOUNT THAN THE PURCHASE PRICE OF THE PRODUCT SOLD BY SAMSUNG
AND CAUSING THE ALLEGED DAMAGE. WITHOUT LIMITING THE FOREGOING, PURCHASER ASSUMES ALL RISK AND LIABILITY
FOR LOSS, DAMAGE OR INJURY TO PURCHASER AND PURCHASER’S PROPERTY AND TO OTHERS AND THEIR PROPERTY
ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE THIS PRODUCT. THIS LIMITED WARRANTY SHALL NOT EXTEND TO
ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT, IS NONTRANSFERABLE AND STATES YOUR EXCLUSIVE
REMEDY.
Some jurisdictions do not allow limitations on how long an implied warranty lasts, or the exclusion or limitation of incidental or consequential
damages, so the above limitations or exclusions may not apply to you. This warranty gives you specific legal rights, and you may also
have other rights which vary from jurisdiction to jurisdiction.
To obtain warranty service, please contact SAMSUNG at:
SAMSUNG ELECTRONICS CANADA INC.,
55 STANDISH COURT MISSISSAUGA ONTARIO, L5R 4B2
1-800-SAMSUNG (726-7864) and www.samsung.com/ca
52_ Warranty
FTQ352IWX_XAC DG68-00106A.indb 52
2007-09-10 ¿ÀÈÄ 3:49:27
FTQ352IWX_XAC DG68-00106A.indb 53
2007-09-10 ¿ÀÈÄ 3:49:27
FTQ352IWX_XAC DG68-00106A.indb 54
2007-09-10 ¿ÀÈÄ 3:49:27
FTQ352IWX_XAC DG68-00106A.indb 55
2007-09-10 ¿ÀÈÄ 3:49:27
QUESTIONS OR COMMENTS?
COUNTRY
CALL
OR VISIT US ONLINE AT
IN THE US
1-800-SAMSUNG (726-7864)
www.samsung.com/us
IN CANADA
1-800-SAMSUNG (726-7864)
www.samsung.com/ca
DG68-00106A
FTQ352IWX_XAC DG68-00106A.indb 56
2007-09-10 ¿ÀÈÄ 3:49:27

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Languages